From c56c81abe7e684bc6203632d807303eb765690dc Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Wed, 8 Apr 2009 15:08:23 -0700
Subject: dmatest: fix max channels handling

The check for reaching max_channels is short circuited by 'continuing'
after successfully adding a channel.

[ Impact: make the 'max_channels' module parameter actually have an effect ]

Cc: <stable@kernel.org>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmatest.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a27c0fb1bc1..fb7da5141e9 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -531,9 +531,7 @@ static int __init dmatest_init(void)
 		chan = dma_request_channel(mask, filter, NULL);
 		if (chan) {
 			err = dmatest_add_channel(chan);
-			if (err == 0)
-				continue;
-			else {
+			if (err) {
 				dma_release_channel(chan);
 				break; /* add_channel failed, punt */
 			}
-- 
cgit v1.2.3


From 295c01f90db2b8b8394e1f7cde59b96d71f98e07 Mon Sep 17 00:00:00 2001
From: Christian Hohnstaedt <chohnstaedt@innominate.com>
Date: Sun, 12 Apr 2009 13:01:44 +0800
Subject: crypto: ixp4xx - check firmware for crypto support

 - the loaded firmware may not support crypto at all or
   only support DES and 3DES but not AES or
   support DES, 3DES and AES.

 - in case of no crypto support of the firmware, the module load will fail.
 - in case of missing AES support, the AES algorithms are not registered
   and a warning is printed during module load.

Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/ixp4xx_crypto.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index af9761ccf9f..9224c1f4931 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -415,6 +415,7 @@ static void crypto_done_action(unsigned long arg)
 static int init_ixp_crypto(void)
 {
 	int ret = -ENODEV;
+	u32 msg[2] = { 0, 0 };
 
 	if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
 				IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
@@ -426,9 +427,35 @@ static int init_ixp_crypto(void)
 		return ret;
 
 	if (!npe_running(npe_c)) {
-		npe_load_firmware(npe_c, npe_name(npe_c), dev);
+		ret = npe_load_firmware(npe_c, npe_name(npe_c), dev);
+		if (ret) {
+			return ret;
+		}
+		if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+			goto npe_error;
+	} else {
+		if (npe_send_message(npe_c, msg, "STATUS_MSG"))
+			goto npe_error;
+
+		if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+			goto npe_error;
 	}
 
+	switch ((msg[1]>>16) & 0xff) {
+	case 3:
+		printk(KERN_WARNING "Firmware of %s lacks AES support\n",
+				npe_name(npe_c));
+		support_aes = 0;
+		break;
+	case 4:
+	case 5:
+		support_aes = 1;
+		break;
+	default:
+		printk(KERN_ERR "Firmware of %s lacks crypto support\n",
+			npe_name(npe_c));
+		return -ENODEV;
+	}
 	/* buffer_pool will also be used to sometimes store the hmac,
 	 * so assure it is large enough
 	 */
@@ -459,6 +486,10 @@ static int init_ixp_crypto(void)
 
 	qmgr_enable_irq(RECV_QID);
 	return 0;
+
+npe_error:
+	printk(KERN_ERR "%s not responding\n", npe_name(npe_c));
+	ret = -EIO;
 err:
 	if (ctx_pool)
 		dma_pool_destroy(ctx_pool);
-- 
cgit v1.2.3


From abe5fa7899fb5809ddc7336d8dd0edd5b2b96665 Mon Sep 17 00:00:00 2001
From: Steffen Klassert <steffen.klassert@secunet.com>
Date: Wed, 15 Apr 2009 20:45:03 +0800
Subject: crypto: eseqiv - Fix IV generation for sync algorithms

If crypto_ablkcipher_encrypt() returns synchronous,
eseqiv_complete2() is called even if req->giv is already the
pointer to the generated IV. The generated IV is overwritten
with some random data in this case. This patch fixes this by
calling eseqiv_complete2() just if the generated IV has to be
copied to req->giv.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 crypto/eseqiv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c
index 2a342c8e52b..3ca3b669d5d 100644
--- a/crypto/eseqiv.c
+++ b/crypto/eseqiv.c
@@ -153,7 +153,8 @@ static int eseqiv_givencrypt(struct skcipher_givcrypt_request *req)
 	if (err)
 		goto out;
 
-	eseqiv_complete2(req);
+	if (giv != req->giv)
+		eseqiv_complete2(req);
 
 out:
 	return err;
-- 
cgit v1.2.3


From 2fdb11449ca82f4f1907fce4929df4e0bd267c50 Mon Sep 17 00:00:00 2001
From: "Denis V. Lunev" <den@openvz.org>
Date: Sun, 12 Apr 2009 08:14:46 +0100
Subject: mtd: mtd in mtd_release is unused without CONFIG_MTD_CHAR

drivers/mtd/mtdcore.c: In function 'mtd_release':
drivers/mtd/mtdcore.c:51: warning: unused variable 'mtd'

[akpm: make it actually build]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdcore.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index fdd6ae85939..051b4d4ed21 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -48,11 +48,11 @@ static LIST_HEAD(mtd_notifiers);
  */
 static void mtd_release(struct device *dev)
 {
-	struct mtd_info *mtd = dev_to_mtd(dev);
+	dev_t index = MTD_DEVT(dev_to_mtd(dev)->index);
 
 	/* remove /dev/mtdXro node if needed */
-	if (MTD_DEVT(mtd->index))
-		device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1);
+	if (index)
+		device_destroy(mtd_class, index + 1);
 }
 
 static ssize_t mtd_type_show(struct device *dev,
-- 
cgit v1.2.3


From e7693548950ea5801d5d8b00414aed37033cf972 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <dedekind@infradead.org>
Date: Sat, 18 Apr 2009 12:29:42 +0300
Subject: mtd: expose subpage size via sysfs

MTD has got sysfs support in 2.6.30-rc1. But subpage size is not
exposed there - do this.

UBI utilities badly need this parameter. At the moment there is
no way to get subpage size - ioctls do not return it. And we
just got sysfs support, so we can easilly extend it with this
additional parameter.

This can be merged late in the development cycle because:
1. sysfs support has been just added - there are no users for
   it so far, even.
2. UBI utilities really need this parameter, and it is better
   not to delay this.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdcore.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 051b4d4ed21..bccb4b1ffc4 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -132,6 +132,17 @@ static ssize_t mtd_writesize_show(struct device *dev,
 }
 static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
 
+static ssize_t mtd_subpagesize_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mtd_info *mtd = dev_to_mtd(dev);
+	unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
+
+}
+static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
+
 static ssize_t mtd_oobsize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -169,6 +180,7 @@ static struct attribute *mtd_attrs[] = {
 	&dev_attr_size.attr,
 	&dev_attr_erasesize.attr,
 	&dev_attr_writesize.attr,
+	&dev_attr_subpagesize.attr,
 	&dev_attr_oobsize.attr,
 	&dev_attr_numeraseregions.attr,
 	&dev_attr_name.attr,
-- 
cgit v1.2.3


From ff6945279d45edd8f6b0a5ddb1ef16cecce3ea9c Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Mon, 20 Apr 2009 19:45:13 +0000
Subject: [CIFS] Make cifs_unlink consistent in checks for null inode

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES  |  6 ++++++
 fs/cifs/cifsfs.h |  2 +-
 fs/cifs/inode.c  | 21 +++++++++++++++------
 3 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 9d1fb6ec8a5..1bf81813627 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,9 @@
+Version 1.58
+------------
+Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
+when the UTF-8 string is composed of unusually long (more than 4 byte) converted
+characters.
+ 
 Version 1.57
 ------------
 Improve support for multiple security contexts to the same server. We
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 77e190dc288..051b71cfdea 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -100,5 +100,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.57"
+#define CIFS_VERSION   "1.58"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index f36b4e40e44..9c869a6dcba 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -962,13 +962,21 @@ undo_setattr:
 	goto out_close;
 }
 
+
+/*
+ * If dentry->d_inode is null (usually meaning the cached dentry
+ * is a negative dentry) then we would attempt a standard SMB delete, but
+ * if that fails we can not attempt the fall back mechanisms on EACESS
+ * but will return the EACESS to the caller.  Note that the VFS does not call
+ * unlink on negative dentries currently.
+ */
 int cifs_unlink(struct inode *dir, struct dentry *dentry)
 {
 	int rc = 0;
 	int xid;
 	char *full_path = NULL;
 	struct inode *inode = dentry->d_inode;
-	struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+	struct cifsInodeInfo *cifs_inode;
 	struct super_block *sb = dir->i_sb;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
 	struct cifsTconInfo *tcon = cifs_sb->tcon;
@@ -1012,7 +1020,7 @@ psx_del_no_retry:
 		rc = cifs_rename_pending_delete(full_path, dentry, xid);
 		if (rc == 0)
 			drop_nlink(inode);
-	} else if (rc == -EACCES && dosattr == 0) {
+	} else if ((rc == -EACCES) && (dosattr == 0) && inode) {
 		attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
 		if (attrs == NULL) {
 			rc = -ENOMEM;
@@ -1020,7 +1028,8 @@ psx_del_no_retry:
 		}
 
 		/* try to reset dos attributes */
-		origattr = cifsInode->cifsAttrs;
+		cifs_inode = CIFS_I(inode);
+		origattr = cifs_inode->cifsAttrs;
 		if (origattr == 0)
 			origattr |= ATTR_NORMAL;
 		dosattr = origattr & ~ATTR_READONLY;
@@ -1041,13 +1050,13 @@ psx_del_no_retry:
 
 out_reval:
 	if (inode) {
-		cifsInode = CIFS_I(inode);
-		cifsInode->time = 0;	/* will force revalidate to get info
+		cifs_inode = CIFS_I(inode);
+		cifs_inode->time = 0;	/* will force revalidate to get info
 					   when needed */
 		inode->i_ctime = current_fs_time(sb);
 	}
 	dir->i_ctime = dir->i_mtime = current_fs_time(sb);
-	cifsInode = CIFS_I(dir);
+	cifs_inode = CIFS_I(dir);
 	CIFS_I(dir)->time = 0;	/* force revalidate of dir as well */
 
 	kfree(full_path);
-- 
cgit v1.2.3


From 968460ebd8006d55661dec0fb86712b40d71c413 Mon Sep 17 00:00:00 2001
From: Suresh Jayaraman <sjayaraman@suse.de>
Date: Mon, 20 Apr 2009 18:54:21 +0530
Subject: cifs: Rename cifs_strncpy_to_host and fix buffer size

There is a possibility for the path_name and node_name buffers to
overflow if they contain charcters that are >2 bytes in the local
charset. Resize the buffer allocation so to avoid this possibility.

Also, as pointed out by Jeff Layton, it would be appropriate to
rename the function to cifs_strlcpy_to_host to reflect the fact
that the copied string is always NULL terminated.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a0845dc7b8a..a02c43b3faf 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -88,29 +88,29 @@ static struct {
  *	on failure - errno
  */
 static int
-cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
+cifs_strlcpy_to_host(char **dst, const char *src, const int maxlen,
 		 const bool is_unicode, const struct nls_table *nls_codepage)
 {
 	int plen;
 
 	if (is_unicode) {
 		plen = UniStrnlen((wchar_t *)src, maxlen);
-		*dst = kmalloc(plen + 2, GFP_KERNEL);
+		*dst = kmalloc((4 * plen) + 2, GFP_KERNEL);
 		if (!*dst)
-			goto cifs_strncpy_to_host_ErrExit;
+			goto cifs_strlcpy_to_host_ErrExit;
 		cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
+		(*dst)[plen] = 0;
+		(*dst)[plen+1] = 0; /* needed for Unicode */
 	} else {
 		plen = strnlen(src, maxlen);
 		*dst = kmalloc(plen + 2, GFP_KERNEL);
 		if (!*dst)
-			goto cifs_strncpy_to_host_ErrExit;
-		strncpy(*dst, src, plen);
+			goto cifs_strlcpy_to_host_ErrExit;
+		strlcpy(*dst, src, plen);
 	}
-	(*dst)[plen] = 0;
-	(*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
 	return 0;
 
-cifs_strncpy_to_host_ErrExit:
+cifs_strlcpy_to_host_ErrExit:
 	cERROR(1, ("Failed to allocate buffer for string\n"));
 	return -ENOMEM;
 }
@@ -4029,7 +4029,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy DfsPath */
 		temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
 		max_len = data_end - temp;
-		rc = cifs_strncpy_to_host(&(node->path_name), temp,
+		rc = cifs_strlcpy_to_host(&(node->path_name), temp,
 					max_len, is_unicode, nls_codepage);
 		if (rc)
 			goto parse_DFS_referrals_exit;
@@ -4037,7 +4037,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy link target UNC */
 		temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
 		max_len = data_end - temp;
-		rc = cifs_strncpy_to_host(&(node->node_name), temp,
+		rc = cifs_strlcpy_to_host(&(node->node_name), temp,
 					max_len, is_unicode, nls_codepage);
 		if (rc)
 			goto parse_DFS_referrals_exit;
-- 
cgit v1.2.3


From 7b0c8fcff47a885743125dd843db64af41af5a61 Mon Sep 17 00:00:00 2001
From: Suresh Jayaraman <sjayaraman@suse.de>
Date: Mon, 20 Apr 2009 18:54:36 +0530
Subject: cifs: Increase size of tmp_buf in cifs_readdir to avoid potential
 overflows

Increase size of tmp_buf to possible maximum to avoid potential
overflows.

Pointed-out-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/readdir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 1a8be622833..ebd0da7ecb3 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -1074,7 +1074,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 		with the rare long characters alloc more to account for
 		such multibyte target UTF-8 characters. cifs_unicode.c,
 		which actually does the conversion, has the same limit */
-		tmp_buf = kmalloc((2 * NAME_MAX) + 4, GFP_KERNEL);
+		tmp_buf = kmalloc((4 * NAME_MAX) + 2, GFP_KERNEL);
 		for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
 			if (current_entry == NULL) {
 				/* evaluate whether this case is an error */
-- 
cgit v1.2.3


From 37fc334cc8eb84f5fe0a5a1cbe6a6a68049e142a Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 21 Apr 2009 13:27:16 +0800
Subject: crypto: api - Fix algorithm module auto-loading

The commit a760a6656e6f00bb0144a42a048cf0266646e22c (crypto:
api - Fix module load deadlock with fallback algorithms) broke
the auto-loading of algorithms that require fallbacks.  The
problem is that the fallback mask check is missing an and which
cauess bits that should be considered to interfere with the
result.

Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 crypto/api.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/crypto/api.c b/crypto/api.c
index 314dab96840..fd2545decb2 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -221,7 +221,8 @@ struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask)
 
 		request_module(name);
 
-		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
+		      CRYPTO_ALG_NEED_FALLBACK) &&
 		    snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
 			request_module(tmp);
 
-- 
cgit v1.2.3


From acd246b7494c629aa617da49716409566cf52149 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 21 Apr 2009 13:55:20 +0800
Subject: crypto: padlock - Revert aes-all alias to aes

Since the padlock-aes driver doesn't require a fallback (it's
only padlock-sha that does), it should use the aes alias rather
than aes-all so that ones that do need a fallback can use it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 drivers/crypto/padlock-aes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 3f0fdd18255..856b3cc2558 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -489,4 +489,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algorithm support");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("aes-all");
+MODULE_ALIAS("aes");
-- 
cgit v1.2.3


From 66ab3a74c5ce737effc2c64391e036b0938b1c36 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 21 Apr 2009 11:44:57 +0200
Subject: CRIS: Merge machine dependent boot/compressed and boot/rescue

Merge the machine dependent boot directories for v10 and v32.
This avoids some code duplication and eases the way for further
merging later on.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/Makefile                                |  14 +-
 arch/cris/arch-v10/boot/.gitignore                |   2 -
 arch/cris/arch-v10/boot/Makefile                  |  20 --
 arch/cris/arch-v10/boot/compressed/Makefile       |  27 --
 arch/cris/arch-v10/boot/compressed/README         |  25 --
 arch/cris/arch-v10/boot/compressed/decompress.lds |  30 --
 arch/cris/arch-v10/boot/compressed/head.S         | 126 -------
 arch/cris/arch-v10/boot/compressed/misc.c         | 246 --------------
 arch/cris/arch-v10/boot/rescue/Makefile           |  35 --
 arch/cris/arch-v10/boot/rescue/head.S             | 360 --------------------
 arch/cris/arch-v10/boot/rescue/kimagerescue.S     | 143 --------
 arch/cris/arch-v10/boot/rescue/rescue.lds         |  20 --
 arch/cris/arch-v10/boot/rescue/testrescue.S       |  24 --
 arch/cris/arch-v10/boot/tools/build.c             | 287 ----------------
 arch/cris/arch-v32/boot/Makefile                  |  20 --
 arch/cris/arch-v32/boot/compressed/Makefile       |  26 --
 arch/cris/arch-v32/boot/compressed/README         |  24 --
 arch/cris/arch-v32/boot/compressed/decompress.lds |  30 --
 arch/cris/arch-v32/boot/compressed/head.S         | 145 --------
 arch/cris/arch-v32/boot/compressed/misc.c         | 318 ------------------
 arch/cris/arch-v32/boot/rescue/Makefile           |  26 --
 arch/cris/arch-v32/boot/rescue/head.S             |  26 --
 arch/cris/arch-v32/boot/rescue/rescue.lds         |  43 ---
 arch/cris/boot/.gitignore                         |   2 +
 arch/cris/boot/Makefile                           |  24 ++
 arch/cris/boot/compressed/Makefile                |  38 +++
 arch/cris/boot/compressed/README                  |  24 ++
 arch/cris/boot/compressed/decompress_v10.lds      |  30 ++
 arch/cris/boot/compressed/decompress_v32.lds      |  30 ++
 arch/cris/boot/compressed/head_v10.S              | 126 +++++++
 arch/cris/boot/compressed/head_v32.S              | 145 ++++++++
 arch/cris/boot/compressed/misc.c                  | 391 ++++++++++++++++++++++
 arch/cris/boot/rescue/Makefile                    |  47 +++
 arch/cris/boot/rescue/head_v10.S                  | 360 ++++++++++++++++++++
 arch/cris/boot/rescue/head_v32.S                  |  26 ++
 arch/cris/boot/rescue/kimagerescue.S              | 143 ++++++++
 arch/cris/boot/rescue/rescue_v10.lds              |  20 ++
 arch/cris/boot/rescue/rescue_v32.lds              |  43 +++
 arch/cris/boot/rescue/testrescue.S                |  24 ++
 arch/cris/boot/tools/build.c                      | 287 ++++++++++++++++
 40 files changed, 1767 insertions(+), 2010 deletions(-)
 delete mode 100644 arch/cris/arch-v10/boot/.gitignore
 delete mode 100644 arch/cris/arch-v10/boot/Makefile
 delete mode 100644 arch/cris/arch-v10/boot/compressed/Makefile
 delete mode 100644 arch/cris/arch-v10/boot/compressed/README
 delete mode 100644 arch/cris/arch-v10/boot/compressed/decompress.lds
 delete mode 100644 arch/cris/arch-v10/boot/compressed/head.S
 delete mode 100644 arch/cris/arch-v10/boot/compressed/misc.c
 delete mode 100644 arch/cris/arch-v10/boot/rescue/Makefile
 delete mode 100644 arch/cris/arch-v10/boot/rescue/head.S
 delete mode 100644 arch/cris/arch-v10/boot/rescue/kimagerescue.S
 delete mode 100644 arch/cris/arch-v10/boot/rescue/rescue.lds
 delete mode 100644 arch/cris/arch-v10/boot/rescue/testrescue.S
 delete mode 100644 arch/cris/arch-v10/boot/tools/build.c
 delete mode 100644 arch/cris/arch-v32/boot/Makefile
 delete mode 100644 arch/cris/arch-v32/boot/compressed/Makefile
 delete mode 100644 arch/cris/arch-v32/boot/compressed/README
 delete mode 100644 arch/cris/arch-v32/boot/compressed/decompress.lds
 delete mode 100644 arch/cris/arch-v32/boot/compressed/head.S
 delete mode 100644 arch/cris/arch-v32/boot/compressed/misc.c
 delete mode 100644 arch/cris/arch-v32/boot/rescue/Makefile
 delete mode 100644 arch/cris/arch-v32/boot/rescue/head.S
 delete mode 100644 arch/cris/arch-v32/boot/rescue/rescue.lds
 create mode 100644 arch/cris/boot/.gitignore
 create mode 100644 arch/cris/boot/Makefile
 create mode 100644 arch/cris/boot/compressed/Makefile
 create mode 100644 arch/cris/boot/compressed/README
 create mode 100644 arch/cris/boot/compressed/decompress_v10.lds
 create mode 100644 arch/cris/boot/compressed/decompress_v32.lds
 create mode 100644 arch/cris/boot/compressed/head_v10.S
 create mode 100644 arch/cris/boot/compressed/head_v32.S
 create mode 100644 arch/cris/boot/compressed/misc.c
 create mode 100644 arch/cris/boot/rescue/Makefile
 create mode 100644 arch/cris/boot/rescue/head_v10.S
 create mode 100644 arch/cris/boot/rescue/head_v32.S
 create mode 100644 arch/cris/boot/rescue/kimagerescue.S
 create mode 100644 arch/cris/boot/rescue/rescue_v10.lds
 create mode 100644 arch/cris/boot/rescue/rescue_v32.lds
 create mode 100644 arch/cris/boot/rescue/testrescue.S
 create mode 100644 arch/cris/boot/tools/build.c

diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index 3662cfb7b61..71e17d3eedd 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -70,7 +70,7 @@ SRC_ARCH              = $(srctree)/arch/cris
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/cris
 
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
 MACHINE := arch/cris/$(SARCH)
 
 all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
 archprepare:
 
 archclean:
-	$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+	$(Q)if [ -e arch/cris/boot ]; then \
+		$(MAKE) $(clean)=arch/cris/boot; \
 	fi
 
 CLEAN_FILES += \
-	$(MACHINE)/boot/zImage \
-	$(MACHINE)/boot/compressed/decompress.bin \
-	$(MACHINE)/boot/compressed/piggy.gz \
-	$(MACHINE)/boot/rescue/rescue.bin
+	$(boot)/zImage \
+	$(boot)/compressed/decompress.bin \
+	$(boot)/compressed/piggy.gz \
+	$(boot)/rescue/rescue.bin
 
 
 # MRPROPER_FILES +=
diff --git a/arch/cris/arch-v10/boot/.gitignore b/arch/cris/arch-v10/boot/.gitignore
deleted file mode 100644
index 171a0853caf..00000000000
--- a/arch/cris/arch-v10/boot/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-Image
-zImage
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
deleted file mode 100644
index 21720301443..00000000000
--- a/arch/cris/arch-v10/boot/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v10/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage:  $(obj)/compressed/vmlinux
-	@cp $< $@
-	@echo '  Kernel: $@ is ready'
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
deleted file mode 100644
index 6fe0ffaf3be..00000000000
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# arch/cris/arch-v10/boot/compressed/Makefile
-#
-
-asflags-y += $(LINUXINCLUDE)
-ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD   $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-	$(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)
-
diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README
deleted file mode 100644
index 48b3db9924b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/README
+++ /dev/null
@@ -1,25 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and 
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img. 
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.lds b/arch/cris/arch-v10/boot/compressed/decompress.lds
deleted file mode 100644
index e80f4594d54..00000000000
--- a/arch/cris/arch-v10/boot/compressed/decompress.lds
+++ /dev/null
@@ -1,30 +0,0 @@
-/* OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_FORMAT(elf32-cris)
-
-MEMORY 
-	{
-	dram : ORIGIN = 0x40700000,
-	       LENGTH = 0x00100000
-	}
-
-SECTIONS
-{
-	.text :
-	{
-		_stext = . ;
-		*(.text)
-		*(.rodata)
-		*(.rodata.*)
-		_etext = . ;
-	} > dram
-	.data :
-	{
-		*(.data)
-		_edata = . ;
-	} > dram
-	.bss :
-	{
-		*(.bss)
-		_end = ALIGN( 0x10 ) ;
-	} > dram
-}
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
deleted file mode 100644
index 0bb4dcc2925..00000000000
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *  arch/cris/boot/compressed/head.S
- *
- *  Copyright (C) 1999, 2001 Axis Communications AB
- *
- *  Code that sets up the DRAM registers, calls the
- *  decompressor to unpack the piggybacked kernel, and jumps.
- *
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define RAM_INIT_MAGIC 0x56902387
-#define COMMAND_LINE_MAGIC 0x87109563
-
-	;; Exported symbols
-
-	.globl	input_data
-
-
-	.text
-
-	nop
-	di
-
-;; We need to initialze DRAM registers before we start using the DRAM
-
-	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
-	beq	dram_init_finished
-	nop
-
-#include "../../lib/dram_init.S"
-
-dram_init_finished:
-
-	;; Initiate the PA and PB ports
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
-	move.b   $r0, [R_PORT_PA_DATA]
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
-	move.b   $r0, [R_PORT_PA_DIR]
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
-	move.b   $r0, [R_PORT_PB_DATA]
-
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
-	move.b   $r0, [R_PORT_PB_DIR]
-
-	;; Setup the stack to a suitably high address.
-	;; We assume 8 MB is the minimum DRAM in an eLinux
-	;; product and put the sp at the top for now.
-
-	move.d	0x40800000, $sp
-
-	;; Figure out where the compressed piggyback image is
-	;; in the flash (since we wont try to copy it to DRAM
-	;; before unpacking). It is at _edata, but in flash.
-	;; Use (_edata - basse) as offset to the current PC.
-
-basse:	move.d	$pc, $r5
-	and.d	0x7fffffff, $r5	; strip any non-cache bit
-	subq	2, $r5		; compensate for the move.d $pc instr
-	move.d	$r5, $r0		; save for later - flash address of 'basse'
-	add.d	_edata, $r5
-	sub.d	basse, $r5	; $r5 = flash address of '_edata'
-
-	;; Copy text+data to DRAM
-
-	move.d	basse, $r1	; destination
-	move.d	_edata, $r2	; end destination
-1:	move.w	[$r0+], $r3
-	move.w	$r3, [$r1+]
-	cmp.d	$r2, $r1
-	bcs	1b
-	nop
-
-	move.d	$r5, [input_data] ; for the decompressor
-
-
-	;; Clear the decompressors BSS (between _edata and _end)
-
-	moveq	0, $r0
-	move.d	_edata, $r1
-	move.d	_end, $r2
-1:	move.w	$r0, [$r1+]
-	cmp.d	$r2, $r1
-	bcs	1b
-	nop
-
-	;;  Save command line magic and address.
-	move.d	_cmd_line_magic, $r12
-	move.d  $r10, [$r12]
-	move.d	_cmd_line_addr, $r12
-	move.d  $r11, [$r12]
-
-	;; Do the decompression and save compressed size in inptr
-
-	jsr	decompress_kernel
-
-	;; Put start address of root partition in $r9 so the kernel can use it
-	;; when mounting from flash
-
-	move.d	[input_data], $r9	; flash address of compressed kernel
-	add.d	[inptr], $r9		; size of compressed kernel
-
-	;; Restore command line magic and address.
-	move.d  _cmd_line_magic, $r10
-	move.d  [$r10], $r10
-	move.d  _cmd_line_addr, $r11
-	move.d  [$r11], $r11
-
-	;; Enter the decompressed kernel
-	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
-	jump	0x40004000	; kernel is linked to this address
-
-	.data
-
-input_data:
-	.dword	0		; used by the decompressor
-_cmd_line_magic:
-	.dword 0
-_cmd_line_addr:
-	.dword 0
-#include "../../lib/hw_settings.S"
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
deleted file mode 100644
index a4db1507d3b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n)     memset((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-unsigned inptr = 0;	/* index of next byte to be processed in inbuf
-			 * After decompression it will contain the
-			 * compressed size, and head.S will read it.
-			 */
-
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { \
-		if (!(cond)) \
-			error(msg); \
-	} while (0)
-#  define Trace(x) fprintf x
-#  define Tracev(x) do { \
-		if (verbose) \
-			fprintf x; \
-	} while (0)
-#  define Tracevv(x) do { \
-		if (verbose > 1) \
-			fprintf x; \
-	} while (0)
-#  define Tracec(c, x) do { \
-		if (verbose && (c)) \
-			fprintf x; \
-	} while (0)
-#  define Tracecv(c, x) do { \
-		if (verbose > 1 && (c)) \
-			fprintf x; \
-	} while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data;  /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
-		*R_SERIAL3_TR_DATA = *s++;
-#endif
-	}
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *)s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-
-	return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out = *in;
-		out++;
-		in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
-
-	while (1);	/* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
-	output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
-	char revision;
-
-	/* input_data is set in head.S */
-	inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-	*R_SERIAL0_XOFF = 0;
-	*R_SERIAL0_BAUD = 0x99;
-	*R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-	*R_SERIAL1_XOFF = 0;
-	*R_SERIAL1_BAUD = 0x99;
-	*R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-	*R_GEN_CONFIG = 0x08;
-	*R_SERIAL2_XOFF = 0;
-	*R_SERIAL2_BAUD = 0x99;
-	*R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-	*R_GEN_CONFIG = 0x100;
-	*R_SERIAL3_XOFF = 0;
-	*R_SERIAL3_BAUD = 0x99;
-	*R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
-	setup_normal_output_buffer();
-
-	makecrc();
-
-	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 10) {
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while (1);
-	}
-
-	puts("Uncompressing Linux...\n");
-	gunzip();
-	puts("Done. Now booting the kernel.\n");
-}
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
deleted file mode 100644
index 82ab59b968e..00000000000
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-ccflags-y += -O2 $(LINUXINCLUDE)
-asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-$(obj)/rescue.o: $(OBJECT) FORCE
-	$(call if_changed,ld)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)
-
-$(obj)/testrescue.bin: $(obj)/testrescue.o
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
-# Pad it to 784 bytes
-	dd if=/dev/zero of=tmp2423 bs=1 count=784
-	cat tr.bin tmp2423 >testrescue_tmp.bin
-	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
-	rm tr.bin tmp2423 testrescue_tmp.bin
-
-$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
-	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
-# Pad it to 784 bytes, that's what the rescue loader expects
-	dd if=/dev/zero of=tmp2423 bs=1 count=784
-	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
-	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
-	rm ktr.bin tmp2423 kimagerescue_tmp.bin
diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S
deleted file mode 100644
index fb503d1eeea..00000000000
--- a/arch/cris/arch-v10/boot/rescue/head.S
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Rescue code, made to reside at the beginning of the
- * flash-memory. when it starts, it checks a partition
- * table at the first sector after the rescue sector.
- * the partition table was generated by the product builder
- * script and contains offsets, lengths, types and checksums
- * for each partition that this code should check.
- *
- * If any of the checksums fail, we assume the flash is so
- * corrupt that we cant use it to boot into the ftp flash
- * loader, and instead we initialize the serial port to
- * receive a flash-loader and new flash image. we dont include
- * any flash code here, but just accept a certain amount of
- * bytes from the serial port and jump into it. the downloaded
- * code is put in the cache.
- *
- * The partitiontable is designed so that it is transparent to
- * code execution - it has a relative branch opcode in the
- * beginning that jumps over it. each entry contains extra
- * data so we can add stuff later.
- *
- * Partition table format:
- *
- *     Code transparency:
- *
- *     2 bytes    [opcode 'nop']
- *     2 bytes    [opcode 'di']
- *     4 bytes    [opcode 'ba <offset>', 8-bit or 16-bit version]
- *     2 bytes    [opcode 'nop', delay slot]
- *
- *     Table validation (at +10):
- *
- *     2 bytes    [magic/version word for partitiontable - 0xef, 0xbe]
- *     2 bytes    [length of all entries plus the end marker]
- *     4 bytes    [checksum for the partitiontable itself]
- *
- *     Entries, each with the following format, last has offset -1:
- *
- *        4 bytes    [offset in bytes, from start of flash]
- *        4 bytes    [length in bytes of partition]
- *        4 bytes    [checksum, simple longword sum]
- *        2 bytes    [partition type]
- *        2 bytes    [flags, only bit 0 used, ro/rw = 1/0]
- *        16 bytes   [reserved for future use]
- *
- *     End marker
- *
- *        4 bytes    [-1]
- *
- *	 10 bytes    [0, padding]
- *
- * Bit 0 in flags signifies RW or RO. The rescue code only bothers
- * to check the checksum for RO partitions, since the others will
- * change their data without updating the checksums. A 1 in bit 0
- * means RO, 0 means RW. That way, it is possible to set a partition
- * in RO mode initially, and later mark it as RW, since you can always
- * write 0's to the flash.
- *
- * During the wait for serial input, the status LED will flash so the
- * user knows something went wrong.
- *
- * Copyright (C) 1999-2007 Axis Communications AB
- */
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-	;; The partitiontable is looked for at the first sector after the boot
-	;; sector. Sector size is 65536 bytes in all flashes we use.
-
-#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
-#define PTABLE_MAGIC 0xbeef
-
-	;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
-	;; That is not where we put our downloaded serial boot-code.
-	;; The length is enough for downloading code that loads the rest
-	;; of itself (after having setup the DRAM etc).
-	;; It is the same length as the on-chip ROM loads, so the same
-	;; host loader can be used to load a rescued product as well as
-	;; one booted through the Etrax serial boot code.
-
-#define CODE_START 0x40000000
-#define CODE_LENGTH 784
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
-#define NOP_DI 0xf025050f
-#define RAM_INIT_MAGIC 0x56902387
-
-	.text
-
-	;; This is the entry point of the rescue code
-	;; 0x80000000 if loaded in flash (as it should be)
-	;; Since etrax actually starts at address 2 when booting from flash, we
-	;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
-	nop
-	di
-
-	jump	in_cache	; enter cached area instead
-in_cache:
-
-
-	;; First put a jump test to give a possibility of upgrading the
-	;; rescue code without erasing/reflashing the sector.
-	;; We put a longword of -1 here and if it is not -1, we jump using
-	;; the value as jump target. Since we can always change 1's to 0's
-	;; without erasing the sector, it is possible to add new
-	;; code after this and altering the jumptarget in an upgrade.
-
-jtcd:	move.d	[jumptarget], $r0
-	cmp.d	0xffffffff, $r0
-	beq	no_newjump
-	nop
-
-	jump	[$r0]
-
-jumptarget:
-	.dword	0xffffffff	; can be overwritten later to insert new code
-
-no_newjump:
-#ifdef CONFIG_ETRAX_ETHERNET
-	;; Start MII clock to make sure it is running when tranceiver is reset
-	move.d 0x3, $r0    ; enable = on, phy = mii_clk
-	move.d $r0, [R_NETWORK_GEN_CONFIG]
-#endif
-
-	;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
-
-	;; we now should go through the checksum-table and check the listed
-	;; partitions for errors.
-
-	move.d	PTABLE_START, $r3
-	move.d	[$r3], $r0
-	cmp.d	NOP_DI, $r0	; make sure the nop/di is there...
-	bne	do_rescue
-	nop
-
-	;; skip the code transparency block (10 bytes).
-
-	addq	10, $r3
-
-	;; check for correct magic
-
-	move.w	[$r3+], $r0
-	cmp.w	PTABLE_MAGIC, $r0
-	bne	do_rescue	; didn't recognize - trig rescue
-	nop
-
-	;; check for correct ptable checksum
-
-	movu.w	[$r3+], $r2	; ptable length
-	move.d	$r2, $r8	; save for later, length of total ptable
-	addq	28, $r8		; account for the rest
-	move.d	[$r3+], $r4	; ptable checksum
-	move.d	$r3, $r1
-	jsr	checksum	; r1 source, r2 length, returns in r0
-
-	cmp.d	$r0, $r4
-	bne	do_rescue	; didn't match - trig rescue
-	nop
-
-	;; ptable is ok. validate each entry.
-
-	moveq	-1, $r7
-
-ploop:	move.d	[$r3+], $r1	; partition offset (from ptable start)
-	bne	notfirst	; check if it is the partition containing ptable
-	nop			; yes..
-	move.d	$r8, $r1	; for its checksum check, skip the ptable
-	move.d	[$r3+], $r2	; partition length
-	sub.d	$r8, $r2	; minus the ptable length
-	ba	bosse
-	nop
-notfirst:
-	cmp.d	-1, $r1		; the end of the ptable ?
-	beq	flash_ok	;   if so, the flash is validated
-	move.d	[$r3+], $r2	; partition length
-bosse:	move.d	[$r3+], $r5	; checksum
-	move.d	[$r3+], $r4	; type and flags
-	addq	16, $r3		; skip the reserved bytes
-	btstq	16, $r4		; check ro flag
-	bpl	ploop		;   rw partition, skip validation
-	nop
-	btstq	17, $r4		; check bootable flag
-	bpl	1f
-	nop
-	move.d	$r1, $r7	; remember boot partition offset
-1:
-	add.d	PTABLE_START, $r1
-
-	jsr	checksum	; checksum the partition
-
-	cmp.d	$r0, $r5
-	beq	ploop		; checksums matched, go to next entry
-	nop
-
-	;; otherwise fall through to the rescue code.
-
-do_rescue:
-	;; setup port PA and PB default initial directions and data
-	;; (so we can flash LEDs, and so that DTR and others are set)
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
-	move.b	$r0, [R_PORT_PA_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
-	move.b	$r0, [R_PORT_PA_DATA]
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
-	move.b	$r0, [R_PORT_PB_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
-	move.b	$r0, [R_PORT_PB_DATA]
-
-	;; setup the serial port at 115200 baud
-
-	moveq	0, $r0
-	move.d	$r0, [SERXOFF]
-
-	move.b	0x99, $r0
-	move.b	$r0, [SERBAUD]	; 115.2kbaud for both transmit and receive
-
-	move.b	0x40, $r0	; rec enable
-	move.b	$r0, [SERRECC]
-
-	moveq	0, $r1		; "timer" to clock out a LED red flash
-	move.d	CODE_START, $r3	; destination counter
-	movu.w	CODE_LENGTH, $r4; length
-
-wait_ser:
-	addq	1, $r1
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
-	move.d	(1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
-	btstq	16, $r1
-	bpl	1f
-	nop
-	or.d	$r0, $r2	; set bit
-	ba	2f
-	nop
-1:	not	$r0		; clear bit
-	and.d	$r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	$r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	$r2, [R_PORT_PB_DATA]
-#endif
-#ifdef CONFIG_ETRAX_90000000_LEDS
-	move.b	$r2, [0x90000000]
-#endif
-#endif
-
-	;; check if we got something on the serial port
-
-	move.b	[SERSTAT], $r0
-	btstq	0, $r0		; data_avail
-	bpl	wait_ser
-	nop
-
-	;; got something - copy the byte and loop
-
-	move.b	[SERRDAT], $r0
-	move.b	$r0, [$r3+]
-
-	subq	1, $r4		; decrease length
-	bne	wait_ser
-	nop
-
-	;; jump into downloaded code
-
-	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
-					; initialized
-	jump	CODE_START
-
-flash_ok:
-	;; check r7, which contains either -1 or the partition to boot from
-
-	cmp.d	-1, $r7
-	bne	1f
-	nop
-	move.d	PTABLE_START, $r7; otherwise use the ptable start
-1:
-	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
-					; initialized
-	jump	$r7		; boot!
-
-
-	;; Helper subroutines
-
-	;; Will checksum by simple addition
-	;; r1 - source
-	;; r2 - length in bytes
-	;; result will be in r0
-checksum:
-	moveq	0, $r0
-	moveq   CONFIG_ETRAX_FLASH1_SIZE, $r6
-
-	;; If the first physical flash memory is exceeded wrap to the
-	;; second one
-	btstq	26, $r1		; Are we addressing first flash?
-	bpl	1f
-	nop
-	clear.d	$r6
-
-1:	test.d  $r6		; 0 = no wrapping
-	beq	2f
-	nop
-	lslq	20, $r6		; Convert MB to bytes
-	sub.d	$r1, $r6
-
-2:	addu.b	[$r1+], $r0
-	subq	1, $r6		; Flash memory left
-	beq	3f
-	subq	1, $r2		; Length left
-	bne	2b
-	nop
-	ret
-	nop
-
-3:	move.d	MEM_CSE1_START, $r1 ; wrap to second flash
-	ba	2b
-	nop
-
-#endif
diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/arch-v10/boot/rescue/kimagerescue.S
deleted file mode 100644
index 6f7b3e61260..00000000000
--- a/arch/cris/arch-v10/boot/rescue/kimagerescue.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Rescue code to be prepended on a kimage and copied to the
- * rescue serial port.
- * This is called from the rescue code, it will copy received data to
- * 4004000 and after a timeout jump to it.
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define CODE_START 0x40004000
-#define CODE_LENGTH 784
-#define TIMEOUT_VALUE 1000
-
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
-	.text
-	;; This is the entry point of the rescue code
-	;; 0x80000000 if loaded in flash (as it should be)
-	;; since etrax actually starts at address 2 when booting from flash, we
-	;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
-	nop
-	di
-#ifndef CONFIG_SVINTO_SIM
-	;; setup port PA and PB default initial directions and data
-	;; (so we can flash LEDs, and so that DTR and others are set)
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
-	move.b	$r0, [R_PORT_PA_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
-	move.b	$r0, [R_PORT_PA_DATA]
-
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
-	move.b	$r0, [R_PORT_PB_DIR]
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
-	move.b	$r0, [R_PORT_PB_DATA]
-
-	;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
-
-#endif
-	;; Setup the stack to a suitably high address.
-	;; We assume 8 MB is the minimum DRAM in an eLinux
-	;; product and put the sp at the top for now.
-
-	move.d	0x40800000, $sp
-
-	;; setup the serial port at 115200 baud
-
-	moveq	0, $r0
-	move.d	$r0, [SERXOFF]
-
-	move.b	0x99, $r0
-	move.b	$r0, [SERBAUD]		; 115.2kbaud for both transmit
-					; and receive
-
-	move.b	0x40, $r0		; rec enable
-	move.b	$r0, [SERRECC]
-
-
-	moveq	0, $r1			; "timer" to clock out a LED red flash
-	move.d	CODE_START, $r3		; destination counter
-	move.d	CODE_LENGTH, $r4	; length
-	move.d	TIMEOUT_VALUE, $r5	; "timeout" until jump
-
-wait_ser:
-	addq	1, $r1
-	subq	1, $r5			; decrease timeout
-	beq	jump_start		; timed out
-	nop
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
-	move.d	(1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
-	btstq	16, $r1
-	bpl	1f
-	nop
-	or.d	$r0, $r2		; set bit
-	ba	2f
-	nop
-1:	not	$r0			; clear bit
-	and.d	$r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
-	move.b	$r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
-	move.b	$r2, [R_PORT_PB_DATA]
-#endif
-#endif
-
-	;; check if we got something on the serial port
-
-	move.b	[SERSTAT], $r0
-	btstq	0, $r0			; data_avail
-	bpl	wait_ser
-	nop
-
-	;; got something - copy the byte and loop
-
-	move.b	[SERRDAT], $r0
-	move.b	$r0, [$r3+]
-	move.d	TIMEOUT_VALUE, $r5	; reset "timeout"
-	subq	1, $r4			; decrease length
-	bne	wait_ser
-	nop
-jump_start:
-	;; jump into downloaded code
-
-	jump	CODE_START
diff --git a/arch/cris/arch-v10/boot/rescue/rescue.lds b/arch/cris/arch-v10/boot/rescue/rescue.lds
deleted file mode 100644
index 0b52a9490db..00000000000
--- a/arch/cris/arch-v10/boot/rescue/rescue.lds
+++ /dev/null
@@ -1,20 +0,0 @@
-MEMORY 
-	{
-	flash : ORIGIN = 0x00000000,
-	        LENGTH = 0x00100000
-	}
-
-SECTIONS
-{
-	.text :
-	{
-		stext = . ;
-		*(.text)
-		etext = . ;
-	} > flash
-	.data :
-	{
-		*(.data)
-		edata = . ;
-	} > flash
-}
diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/arch-v10/boot/rescue/testrescue.S
deleted file mode 100644
index fc7ec674eca..00000000000
--- a/arch/cris/arch-v10/boot/rescue/testrescue.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Simple testcode to download by the rescue block.
- * Just lights some LEDs to show it was downloaded correctly.
- *
- * Copyright (C) 1999 Axis Communications AB
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-	.text
-
-	nop
-	nop
-	moveq	-1, $r2
-	move.b	$r2, [R_PORT_PA_DIR]
-	moveq	0, $r2
-	move.b	$r2, [R_PORT_PA_DATA]
-
-endless:
-	nop
-	ba	endless
-	nop
-
diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/arch-v10/boot/tools/build.c
deleted file mode 100644
index c8adef36416..00000000000
--- a/arch/cris/arch-v10/boot/tools/build.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  linux/tools/build.c
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-/*
- * This file builds a disk-image from three different files:
- *
- * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
- * - setup: 8086 machine code, sets up system parm
- * - system: 80386 code for actual system
- *
- * It does some checking that all files are of the correct type, and
- * just writes the result to stdout, removing headers and padding to
- * the right amount. It also writes some system data to stderr.
- */
-
-/*
- * Changes by tytso to allow root device specification
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- * Cross compiling fixes by Gertjan van Wingerde, July 1996
- */
-
-#include <stdio.h>	/* fprintf */
-#include <string.h>
-#include <stdlib.h>	/* contains exit */
-#include <sys/types.h>	/* unistd.h needs this */
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-#include <unistd.h>	/* contains read/write */
-#include <fcntl.h>
-#include <errno.h>
-
-#define MINIX_HEADER 32
-
-#define N_MAGIC_OFFSET 1024
-#ifndef __BFD__
-static int GCC_HEADER = sizeof(struct exec);
-#endif
-
-#ifdef __BIG_KERNEL__
-#define SYS_SIZE 0xffff
-#else
-#define SYS_SIZE DEF_SYSSIZE
-#endif
-
-#define DEFAULT_MAJOR_ROOT 0
-#define DEFAULT_MINOR_ROOT 0
-
-/* max nr of sectors of setup: don't change unless you also change
- * bootsect etc */
-#define SETUP_SECTS 4
-
-#define STRINGIFY(x) #x
-
-typedef union {
-	int i;
-	long l;
-	short s[2];
-	char b[4];
-} conv;
-
-long intel_long(long l)
-{
-	conv t;
-
-	t.b[0] = l & 0xff; l >>= 8;
-	t.b[1] = l & 0xff; l >>= 8;
-	t.b[2] = l & 0xff; l >>= 8;
-	t.b[3] = l & 0xff; l >>= 8;
-	return t.l;
-}
-
-int intel_int(int i)
-{
-	conv t;
-
-	t.b[0] = i & 0xff; i >>= 8;
-        t.b[1] = i & 0xff; i >>= 8;
-        t.b[2] = i & 0xff; i >>= 8;
-        t.b[3] = i & 0xff; i >>= 8;
-        return t.i;
-}
-
-short intel_short(short l)
-{
-	conv t;
-
-	t.b[0] = l & 0xff; l >>= 8;
-	t.b[1] = l & 0xff; l >>= 8;
-	return t.s[0];
-}
-
-void die(const char * str)
-{
-	fprintf(stderr,"%s\n",str);
-	exit(1);
-}
-
-void usage(void)
-{
-	die("Usage: build bootsect setup system [rootdev] [> image]");
-}
-
-int main(int argc, char ** argv)
-{
-	int i,c,id,sz,tmp_int;
-	unsigned long sys_size, tmp_long;
-	char buf[1024];
-#ifndef __BFD__
-	struct exec *ex = (struct exec *)buf;
-#endif
-	char major_root, minor_root;
-	struct stat sb;
-	unsigned char setup_sectors;
-
-	if ((argc < 4) || (argc > 5))
-		usage();
-	if (argc > 4) {
-		if (!strcmp(argv[4], "CURRENT")) {
-			if (stat("/", &sb)) {
-				perror("/");
-				die("Couldn't stat /");
-			}
-			major_root = major(sb.st_dev);
-			minor_root = minor(sb.st_dev);
-		} else if (strcmp(argv[4], "FLOPPY")) {
-			if (stat(argv[4], &sb)) {
-				perror(argv[4]);
-				die("Couldn't stat root device.");
-			}
-			major_root = major(sb.st_rdev);
-			minor_root = minor(sb.st_rdev);
-		} else {
-			major_root = 0;
-			minor_root = 0;
-		}
-	} else {
-		major_root = DEFAULT_MAJOR_ROOT;
-		minor_root = DEFAULT_MINOR_ROOT;
-	}
-	fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
-	for (i=0;i<sizeof buf; i++) buf[i]=0;
-	if ((id=open(argv[1],O_RDONLY,0))<0)
-		die("Unable to open 'boot'");
-	if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
-		die("Unable to read header of 'boot'");
-	if (((long *) buf)[0]!=intel_long(0x04100301))
-		die("Non-Minix header of 'boot'");
-	if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
-		die("Non-Minix header of 'boot'");
-	if (((long *) buf)[3] != 0)
-		die("Illegal data segment in 'boot'");
-	if (((long *) buf)[4] != 0)
-		die("Illegal bss in 'boot'");
-	if (((long *) buf)[5] != 0)
-		die("Non-Minix header of 'boot'");
-	if (((long *) buf)[7] != 0)
-		die("Illegal symbol table in 'boot'");
-	i=read(id,buf,sizeof buf);
-	fprintf(stderr,"Boot sector %d bytes.\n",i);
-	if (i != 512)
-		die("Boot block must be exactly 512 bytes");
-	if ((*(unsigned short *)(buf+510)) != (unsigned short)intel_short(0xAA55))
-		die("Boot block hasn't got boot flag (0xAA55)");
-	buf[508] = (char) minor_root;
-	buf[509] = (char) major_root;	
-	i=write(1,buf,512);
-	if (i!=512)
-		die("Write call failed");
-	close (id);
-	
-	if ((id=open(argv[2],O_RDONLY,0))<0)
-		die("Unable to open 'setup'");
-	if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
-		die("Unable to read header of 'setup'");
-	if (((long *) buf)[0]!=intel_long(0x04100301))
-		die("Non-Minix header of 'setup'");
-	if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
-		die("Non-Minix header of 'setup'");
-	if (((long *) buf)[3] != 0)
-		die("Illegal data segment in 'setup'");
-	if (((long *) buf)[4] != 0)
-		die("Illegal bss in 'setup'");
-	if (((long *) buf)[5] != 0)
-		die("Non-Minix header of 'setup'");
-	if (((long *) buf)[7] != 0)
-		die("Illegal symbol table in 'setup'");
-	for (i=0 ; (c=read(id,buf,sizeof buf))>0 ; i+=c )
-#ifdef __BIG_KERNEL__
-	{
-		if (!i) {
-			/* Working with memcpy because of alignment constraints
-			   on Sparc - Gertjan */
-			memcpy(&tmp_long, &buf[2], sizeof(long));
-			if (tmp_long != intel_long(0x53726448) )
-				die("Wrong magic in loader header of 'setup'");
-			memcpy(&tmp_int, &buf[6], sizeof(int));
-			if (tmp_int < intel_int(0x200))
-				die("Wrong version of loader header of 'setup'");
-			buf[0x11] = 1; /* LOADED_HIGH */
-			tmp_long = intel_long(0x100000);
-			memcpy(&buf[0x14], &tmp_long, sizeof(long));  /* code32_start */
-		}
-#endif
-		if (write(1,buf,c)!=c)
-			die("Write call failed");
-#ifdef __BIG_KERNEL__
-	}
-#endif
-	if (c != 0)
-		die("read-error on 'setup'");
-	close (id);
-	setup_sectors = (unsigned char)((i + 511) / 512);
-	/* for compatibility with LILO */
-	if (setup_sectors < SETUP_SECTS)
-		setup_sectors = SETUP_SECTS;
-	fprintf(stderr,"Setup is %d bytes.\n",i);
-	for (c=0 ; c<sizeof(buf) ; c++)
-		buf[c] = '\0';
-	while (i < setup_sectors * 512) {
-		c = setup_sectors * 512 - i;
-		if (c > sizeof(buf))
-			c = sizeof(buf);
-		if (write(1,buf,c) != c)
-			die("Write call failed");
-		i += c;
-	}
-	
-	if ((id=open(argv[3],O_RDONLY,0))<0)
-		die("Unable to open 'system'");
-#ifndef __BFD__
-	if (read(id,buf,GCC_HEADER) != GCC_HEADER)
-		die("Unable to read header of 'system'");
-	if (N_MAGIC(*ex) == ZMAGIC) {
-		GCC_HEADER = N_MAGIC_OFFSET;
-		lseek(id, GCC_HEADER, SEEK_SET);
-	} else if (N_MAGIC(*ex) != QMAGIC)
-		die("Non-GCC header of 'system'");
-	fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n",
-		(ex->a_text+ex->a_data+ex->a_bss)/1024,
-		ex->a_text /1024,
-		ex->a_data /1024,
-		ex->a_bss  /1024);
-	sz = N_SYMOFF(*ex) - GCC_HEADER + 4;
-#else
-	if (fstat (id, &sb)) {
-	  perror ("fstat");
-	  die ("Unable to stat 'system'");
-	}
-	sz = sb.st_size;
-	fprintf (stderr, "System is %d kB\n", sz/1024);
-#endif
-	sys_size = (sz + 15) / 16;
-	if (sys_size > SYS_SIZE)
-		die("System is too big");
-	while (sz > 0) {
-		int l, n;
-
-		l = sz;
-		if (l > sizeof(buf))
-			l = sizeof(buf);
-		if ((n=read(id, buf, l)) != l) {
-			if (n == -1) 
-				perror(argv[1]);
-			else
-				fprintf(stderr, "Unexpected EOF\n");
-			die("Can't read 'system'");
-		}
-		if (write(1, buf, l) != l)
-			die("Write failed");
-		sz -= l;
-	}
-	close(id);
-	if (lseek(1, 497, 0) == 497) {
-		if (write(1, &setup_sectors, 1) != 1)
-			die("Write of setup sectors failed");
-	}
-	if (lseek(1,500,0) == 500) {
-		buf[0] = (sys_size & 0xff);
-		buf[1] = ((sys_size >> 8) & 0xff);
-		if (write(1, buf, 2) != 2)
-			die("Write failed");
-	}
-	return(0);
-}
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
deleted file mode 100644
index 99896ad60b3..00000000000
--- a/arch/cris/arch-v32/boot/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v32/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary -R .note -R .comment
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage:  $(obj)/compressed/vmlinux
-	@cp $< $@
-	@echo '  Kernel: $@ is ready'
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
deleted file mode 100644
index e176b8b69d9..00000000000
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD   $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-	$(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)
diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/arch-v32/boot/compressed/README
deleted file mode 100644
index 182c5d75784..00000000000
--- a/arch/cris/arch-v32/boot/compressed/README
+++ /dev/null
@@ -1,24 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img.
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
diff --git a/arch/cris/arch-v32/boot/compressed/decompress.lds b/arch/cris/arch-v32/boot/compressed/decompress.lds
deleted file mode 100644
index 3c837feca3a..00000000000
--- a/arch/cris/arch-v32/boot/compressed/decompress.lds
+++ /dev/null
@@ -1,30 +0,0 @@
-/*#OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_ARCH (crisv32)
-
-MEMORY
-	{
-	dram : ORIGIN = 0x40700000,
-	       LENGTH = 0x00100000
-	}
-
-SECTIONS
-{
-	.text :
-	{
-		_stext = . ;
-		*(.text)
-		*(.rodata)
-		*(.rodata.*)
-		_etext = . ;
-	} > dram
-	.data :
-	{
-		*(.data)
-		_edata = . ;
-	} > dram
-	.bss :
-	{
-		*(.bss)
-		_end = ALIGN( 0x10 ) ;
-	} > dram
-}
diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/arch-v32/boot/compressed/head.S
deleted file mode 100644
index a4a65c5c669..00000000000
--- a/arch/cris/arch-v32/boot/compressed/head.S
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  Code that sets up the DRAM registers, calls the
- *  decompressor to unpack the piggybacked kernel, and jumps.
- *
- *  Copyright (C) 1999 - 2006, Axis Communications AB
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <hwregs/asm/reg_map_asm.h>
-#include <mach/startup.inc>
-
-#define RAM_INIT_MAGIC 0x56902387
-#define COMMAND_LINE_MAGIC 0x87109563
-
-	;; Exported symbols
-
-	.globl	input_data
-
-	.text
-_start:
-	di
-
-	;; Start clocks for used blocks.
-	START_CLOCKS
-
-	;; Initialize the DRAM registers.
-	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
-	beq	dram_init_finished
-	nop
-
-#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
-#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
-#else
-#error Only ETRAXFS and ARTPEC-3 supported!
-#endif
-
-dram_init_finished:
-
-	GIO_INIT
-	;; Setup the stack to a suitably high address.
-	;; We assume 8 MB is the minimum DRAM and put
-	;; the SP at the top for now.
-
-	move.d	0x40800000, $sp
-
-	;; Figure out where the compressed piggyback image is.
-	;; It is either in [NOR] flash (we don't want to copy it
-	;; to DRAM before unpacking), or copied to DRAM
-	;; by the [NAND] flash boot loader.
-	;; The piggyback image is at _edata, but relative to where the
-	;; image is actually located in memory, not where it is linked
-	;; (the decompressor is linked at 0x40700000+ and runs there).
-	;; Use (_edata - herami) as offset to the current PC.
-
-hereami:
-	lapcq	., $r5		; get PC
-	and.d	0x7fffffff, $r5	; strip any non-cache bit
-	move.d	$r5, $r0	; source address of 'herami'
-	add.d	_edata, $r5
-	sub.d	hereami, $r5	; r5 = flash address of '_edata'
-	move.d	hereami, $r1	; destination
-
-	;; Copy text+data to DRAM
-
-	move.d	_edata, $r2	; end destination
-1:	move.w	[$r0+], $r3	; from herami+ source
-	move.w	$r3, [$r1+]	; to hereami+ destination (linked address)
-	cmp.d	$r2, $r1	; finish when destination == _edata
-	bcs	1b
-	nop
-	move.d	input_data, $r0 ; for the decompressor
-	move.d	$r5, [$r0]	; for the decompressor
-
-	;; Clear the decompressors BSS (between _edata and _end)
-
-	moveq	0, $r0
-	move.d	_edata, $r1
-	move.d	_end, $r2
-1:	move.w	$r0, [$r1+]
-	cmp.d	$r2, $r1
-	bcs	1b
-	nop
-
-	;;  Save command line magic and address.
-	move.d	_cmd_line_magic, $r0
-	move.d  $r10, [$r0]
-	move.d	_cmd_line_addr, $r0
-	move.d  $r11, [$r0]
-
-	;;  Save boot source indicator
-	move.d	_boot_source, $r0
-	move.d	$r12, [$r0]
-
-	;; Do the decompression and save compressed size in _inptr
-
-	jsr	decompress_kernel
-	nop
-
-	;; Restore boot source indicator
-	move.d	_boot_source, $r12
-	move.d	[$r12], $r12
-
-	;; Restore command line magic and address.
-	move.d  _cmd_line_magic, $r10
-	move.d  [$r10], $r10
-	move.d  _cmd_line_addr, $r11
-	move.d  [$r11], $r11
-
-	;; Put start address of root partition in r9 so the kernel can use it
-	;; when mounting from flash
-	move.d  input_data, $r0
-	move.d	[$r0], $r9		; flash address of compressed kernel
-	move.d  inptr, $r0
-	add.d	[$r0], $r9		; size of compressed kernel
-	cmp.d   0x40000000, $r9		; image in DRAM ?
-	blo	enter_kernel		; no, must be [NOR] flash, jump
-	nop				; delay slot
-	and.d   0x001fffff, $r9		; assume compressed kernel was < 2M
-
-enter_kernel:
-	;; Enter the decompressed kernel
-	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
-	jump	0x40004000	; kernel is linked to this address
-	nop
-
-	.data
-
-input_data:
-	.dword	0		; used by the decompressor
-_cmd_line_magic:
-	.dword 0
-_cmd_line_addr:
-	.dword 0
-_boot_source:
-	.dword 0
-
-#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
-#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
-#else
-#error Only ETRAXFS and ARTPEC-3 supported!
-#endif
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
deleted file mode 100644
index 3595e16e82b..00000000000
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/ser_defs.h>
-#include <hwregs/pinmux_defs.h>
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
-#include <hwregs/clkgen_defs.h>
-#endif
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
-
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-unsigned inptr = 0;	/* index of next byte to be processed in inbuf
-			 * After decompression it will contain the
-			 * compressed size, and head.S will read it.
-			 */
-
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte() inbuf[inptr++]
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data;  /* lives in head.S */
-
-static long bytes_out;
-static uch *output_data;
-static unsigned long output_ptr;
-
-static void error(char *m);
-
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
-{
-	reg_ser_rs_stat_din rs;
-	reg_ser_rw_dout dout = {.data = *s};
-
-	do {
-		rs = REG_RD(ser, regi_ser, rs_stat_din);
-	}
-	while (!rs.tr_rdy);/* Wait for transceiver. */
-
-	REG_WR(ser, regi_ser, rw_dout, dout);
-}
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-		serout(s, regi_ser0);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-		serout(s, regi_ser1);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-		serout(s, regi_ser2);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-		serout(s, regi_ser3);
-#endif
-		*s++;
-	}
-/* CONFIG_ETRAX_DEBUG_PORT_NULL */
-#endif
-}
-
-void*
-memset(void* s, int c, size_t n)
-{
-	int i;
-	char *ss = (char*)s;
-
-	for (i=0;i<n;i++) ss[i] = c;
-
-	return s;
-}
-
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i=0;i<__n;i++) d[i] = s[i];
-
-	return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void
-flush_window()
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
-
-static void
-error(char *x)
-{
-	puts("\r\n\n");
-	puts(x);
-	puts("\r\n\n -- System halted\n");
-
-	while(1);	/* Halt */
-}
-
-void
-setup_normal_output_buffer(void)
-{
-	output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-static inline void
-serial_setup(reg_scope_instances regi_ser)
-{
-	reg_ser_rw_xoff xoff;
-	reg_ser_rw_tr_ctrl tr_ctrl;
-	reg_ser_rw_rec_ctrl rec_ctrl;
-	reg_ser_rw_tr_baud_div tr_baud;
-	reg_ser_rw_rec_baud_div rec_baud;
-
-	/* Turn off XOFF. */
-	xoff = REG_RD(ser, regi_ser, rw_xoff);
-
-	xoff.chr = 0;
-	xoff.automatic = regk_ser_no;
-
-	REG_WR(ser, regi_ser, rw_xoff, xoff);
-
-	/* Set baudrate and stopbits. */
-	tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
-	rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
-	tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
-	rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
-
-	tr_ctrl.stop_bits = 1;	/* 2 stop bits. */
-	tr_ctrl.en = 1; /* enable transmitter */
-	rec_ctrl.en = 1; /* enabler receiver */
-
-	/*
-	 * The baudrate setup used to be a bit fishy, but now transmitter and
-	 * receiver are both set to the intended baud rate, 115200.
-	 * The magic value is 29.493 MHz.
-	 */
-	tr_ctrl.base_freq = regk_ser_f29_493;
-	rec_ctrl.base_freq = regk_ser_f29_493;
-	tr_baud.div = (29493000 / 8) / 115200;
-	rec_baud.div = (29493000 / 8) / 115200;
-
-	REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
-	REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
-	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
-	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
-}
-
-void
-decompress_kernel(void)
-{
-	char revision;
-
-#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
-    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
-    defined(CONFIG_ETRAX_DEBUG_PORT3)
-	reg_pinmux_rw_hwprot hwprot;
-
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
-	reg_clkgen_rw_clk_ctrl clk_ctrl;
-
-	/* Enable corresponding clock region when serial 1..3 selected */
-
-	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
-	clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
-	REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
-#endif
-
-	/* pinmux setup for ports 1..3 */
-	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-#endif
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-	serial_setup(regi_ser0);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-	hwprot.ser1 = regk_pinmux_yes;
-	serial_setup(regi_ser1);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-	hwprot.ser2 = regk_pinmux_yes;
-	serial_setup(regi_ser2);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-	hwprot.ser3 = regk_pinmux_yes;
-	serial_setup(regi_ser3);
-#endif
-#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
-    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
-    defined(CONFIG_ETRAX_DEBUG_PORT3)
-	REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-#endif
-
-	/* input_data is set in head.S */
-	inbuf = input_data;
-
-	setup_normal_output_buffer();
-
-	makecrc();
-
-	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 32)
-	{
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
-		while(1);
-	}
-
-	puts("Uncompressing Linux...\r\n");
-	gunzip();
-	puts("Done. Now booting the kernel.\r\n");
-}
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
deleted file mode 100644
index 566aac663a3..00000000000
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-		-I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD      $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
-	$(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)
diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/arch-v32/boot/rescue/head.S
deleted file mode 100644
index 5f846b7700a..00000000000
--- a/arch/cris/arch-v32/boot/rescue/head.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start
- * kernel decompressor.
- *
- * In practice, this only works for NOR flash (or some convoluted RAM boot)
- * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only.
- *
- */
-
-#include <mach/startup.inc>
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-;; Code
-
-	.text
-start:
-
-	;; Start clocks for used blocks.
-	START_CLOCKS
-
-	move.d	CONFIG_ETRAX_PTABLE_SECTOR, $r10
-	jump	$r10			; Jump to decompressor
-	nop
-
-#endif
diff --git a/arch/cris/arch-v32/boot/rescue/rescue.lds b/arch/cris/arch-v32/boot/rescue/rescue.lds
deleted file mode 100644
index 8ac646bc1a2..00000000000
--- a/arch/cris/arch-v32/boot/rescue/rescue.lds
+++ /dev/null
@@ -1,43 +0,0 @@
-/*#OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_ARCH (crisv32)
-/* Now that NAND support has been stripped, this file could be simplified,
- * but it doesn't do any harm on the other hand so why bother. */
-
-MEMORY
-	{
-	bootblk : ORIGIN = 0x38000000,
-	          LENGTH = 0x00004000
-	intmem  : ORIGIN = 0x38004000,
-		  LENGTH = 0x00005000
-	}
-
-SECTIONS
-{
-	.text :
-	{
-		_stext = . ;
-		*(.text)
-		*(.init.text)
-		*(.rodata)
-		*(.rodata.*)
-		_etext = . ;
-	} > bootblk
-	.data :
-	{
-		*(.data)
-		_edata = . ;
-	} > bootblk
-	.bss :
-	{
-		_bss = . ;
-		*(.bss)
-		_end = ALIGN( 0x10 ) ;
-	} > intmem
-
-	/* Get rid of stuff from EXPORT_SYMBOL(foo). */
-	/DISCARD/ :
-	{
-	        *(__ksymtab_strings)
-	        *(__ksymtab)
-	}
-}
diff --git a/arch/cris/boot/.gitignore b/arch/cris/boot/.gitignore
new file mode 100644
index 00000000000..171a0853caf
--- /dev/null
+++ b/arch/cris/boot/.gitignore
@@ -0,0 +1,2 @@
+Image
+zImage
diff --git a/arch/cris/boot/Makefile b/arch/cris/boot/Makefile
new file mode 100644
index 00000000000..144f3afa011
--- /dev/null
+++ b/arch/cris/boot/Makefile
@@ -0,0 +1,24 @@
+#
+# arch/cris/boot/Makefile
+#
+
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
+
+subdir- := compressed rescue
+targets := Image
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
+
+$(obj)/zImage:  $(obj)/compressed/vmlinux
+	@cp $< $@
+	@echo '  Kernel: $@ is ready'
diff --git a/arch/cris/boot/compressed/Makefile b/arch/cris/boot/compressed/Makefile
new file mode 100644
index 00000000000..8fe9338c177
--- /dev/null
+++ b/arch/cris/boot/compressed/Makefile
@@ -0,0 +1,38 @@
+#
+# arch/cris/boot/compressed/Makefile
+#
+
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# 				    -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# 					-I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+
+quiet_cmd_image = BUILD   $@
+cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
+
+targets := vmlinux piggy.gz decompress.o decompress.bin
+
+$(obj)/decompress.o: $(OBJECTS) FORCE
+	$(call if_changed,ld)
+
+$(obj)/decompress.bin: $(obj)/decompress.o FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
+	$(call if_changed,image)
+
+$(obj)/piggy.gz: $(obj)/../Image FORCE
+	$(call if_changed,gzip)
diff --git a/arch/cris/boot/compressed/README b/arch/cris/boot/compressed/README
new file mode 100644
index 00000000000..182c5d75784
--- /dev/null
+++ b/arch/cris/boot/compressed/README
@@ -0,0 +1,24 @@
+Creation of the self-extracting compressed kernel image (vmlinuz)
+-----------------------------------------------------------------
+
+This can be slightly confusing because it's a process with many steps.
+
+The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
+by that makefile into text and data binary files, vmlinux.text and
+vmlinux.data.
+
+Those files together with a ROM filesystem can be catted together and
+burned into a flash or executed directly at the DRAM origin.
+
+They can also be catted together and compressed with gzip, which is what
+happens in this makefile. Together they make up piggy.img.
+
+The decompressor is built into the file decompress.o. It is turned into
+the binary file decompress.bin, which is catted together with piggy.img
+into the file vmlinuz. It can be executed in an arbitrary place in flash.
+
+Be careful - it assumes some things about free locations in DRAM. It
+assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
+so it puts its code at 0x40700000, and initial stack at 0x40800000.
+
+-Bjorn
diff --git a/arch/cris/boot/compressed/decompress_v10.lds b/arch/cris/boot/compressed/decompress_v10.lds
new file mode 100644
index 00000000000..e80f4594d54
--- /dev/null
+++ b/arch/cris/boot/compressed/decompress_v10.lds
@@ -0,0 +1,30 @@
+/* OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_FORMAT(elf32-cris)
+
+MEMORY 
+	{
+	dram : ORIGIN = 0x40700000,
+	       LENGTH = 0x00100000
+	}
+
+SECTIONS
+{
+	.text :
+	{
+		_stext = . ;
+		*(.text)
+		*(.rodata)
+		*(.rodata.*)
+		_etext = . ;
+	} > dram
+	.data :
+	{
+		*(.data)
+		_edata = . ;
+	} > dram
+	.bss :
+	{
+		*(.bss)
+		_end = ALIGN( 0x10 ) ;
+	} > dram
+}
diff --git a/arch/cris/boot/compressed/decompress_v32.lds b/arch/cris/boot/compressed/decompress_v32.lds
new file mode 100644
index 00000000000..3c837feca3a
--- /dev/null
+++ b/arch/cris/boot/compressed/decompress_v32.lds
@@ -0,0 +1,30 @@
+/*#OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_ARCH (crisv32)
+
+MEMORY
+	{
+	dram : ORIGIN = 0x40700000,
+	       LENGTH = 0x00100000
+	}
+
+SECTIONS
+{
+	.text :
+	{
+		_stext = . ;
+		*(.text)
+		*(.rodata)
+		*(.rodata.*)
+		_etext = . ;
+	} > dram
+	.data :
+	{
+		*(.data)
+		_edata = . ;
+	} > dram
+	.bss :
+	{
+		*(.bss)
+		_end = ALIGN( 0x10 ) ;
+	} > dram
+}
diff --git a/arch/cris/boot/compressed/head_v10.S b/arch/cris/boot/compressed/head_v10.S
new file mode 100644
index 00000000000..9edb8ade7e1
--- /dev/null
+++ b/arch/cris/boot/compressed/head_v10.S
@@ -0,0 +1,126 @@
+/*
+ *  arch/cris/boot/compressed/head.S
+ *
+ *  Copyright (C) 1999, 2001 Axis Communications AB
+ *
+ *  Code that sets up the DRAM registers, calls the
+ *  decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+	;; Exported symbols
+
+	.globl	input_data
+
+
+	.text
+
+	nop
+	di
+
+;; We need to initialze DRAM registers before we start using the DRAM
+
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
+	beq	dram_init_finished
+	nop
+
+#include "../../arch-v10/lib/dram_init.S"
+
+dram_init_finished:
+
+	;; Initiate the PA and PB ports
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+	move.b   $r0, [R_PORT_PA_DATA]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+	move.b   $r0, [R_PORT_PA_DIR]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+	move.b   $r0, [R_PORT_PB_DATA]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+	move.b   $r0, [R_PORT_PB_DIR]
+
+	;; Setup the stack to a suitably high address.
+	;; We assume 8 MB is the minimum DRAM in an eLinux
+	;; product and put the sp at the top for now.
+
+	move.d	0x40800000, $sp
+
+	;; Figure out where the compressed piggyback image is
+	;; in the flash (since we wont try to copy it to DRAM
+	;; before unpacking). It is at _edata, but in flash.
+	;; Use (_edata - basse) as offset to the current PC.
+
+basse:	move.d	$pc, $r5
+	and.d	0x7fffffff, $r5	; strip any non-cache bit
+	subq	2, $r5		; compensate for the move.d $pc instr
+	move.d	$r5, $r0		; save for later - flash address of 'basse'
+	add.d	_edata, $r5
+	sub.d	basse, $r5	; $r5 = flash address of '_edata'
+
+	;; Copy text+data to DRAM
+
+	move.d	basse, $r1	; destination
+	move.d	_edata, $r2	; end destination
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
+	bcs	1b
+	nop
+
+	move.d	$r5, [input_data] ; for the decompressor
+
+
+	;; Clear the decompressors BSS (between _edata and _end)
+
+	moveq	0, $r0
+	move.d	_edata, $r1
+	move.d	_end, $r2
+1:	move.w	$r0, [$r1+]
+	cmp.d	$r2, $r1
+	bcs	1b
+	nop
+
+	;;  Save command line magic and address.
+	move.d	_cmd_line_magic, $r12
+	move.d  $r10, [$r12]
+	move.d	_cmd_line_addr, $r12
+	move.d  $r11, [$r12]
+
+	;; Do the decompression and save compressed size in inptr
+
+	jsr	decompress_kernel
+
+	;; Put start address of root partition in $r9 so the kernel can use it
+	;; when mounting from flash
+
+	move.d	[input_data], $r9	; flash address of compressed kernel
+	add.d	[inptr], $r9		; size of compressed kernel
+
+	;; Restore command line magic and address.
+	move.d  _cmd_line_magic, $r10
+	move.d  [$r10], $r10
+	move.d  _cmd_line_addr, $r11
+	move.d  [$r11], $r11
+
+	;; Enter the decompressed kernel
+	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
+	jump	0x40004000	; kernel is linked to this address
+
+	.data
+
+input_data:
+	.dword	0		; used by the decompressor
+_cmd_line_magic:
+	.dword 0
+_cmd_line_addr:
+	.dword 0
+#include "../../arch-v10/lib/hw_settings.S"
diff --git a/arch/cris/boot/compressed/head_v32.S b/arch/cris/boot/compressed/head_v32.S
new file mode 100644
index 00000000000..f483005f3d4
--- /dev/null
+++ b/arch/cris/boot/compressed/head_v32.S
@@ -0,0 +1,145 @@
+/*
+ *  Code that sets up the DRAM registers, calls the
+ *  decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ *  Copyright (C) 1999 - 2006, Axis Communications AB
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <hwregs/asm/reg_map_asm.h>
+#include <mach/startup.inc>
+
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+	;; Exported symbols
+
+	.globl	input_data
+
+	.text
+start:
+	di
+
+	;; Start clocks for used blocks.
+	START_CLOCKS
+
+	;; Initialize the DRAM registers.
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
+	beq	dram_init_finished
+	nop
+
+#if defined CONFIG_ETRAXFS
+#include "../../arch-v32/mach-fs/dram_init.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../../arch-v32/mach-a3/dram_init.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
+
+dram_init_finished:
+
+	GIO_INIT
+	;; Setup the stack to a suitably high address.
+	;; We assume 8 MB is the minimum DRAM and put
+	;; the SP at the top for now.
+
+	move.d	0x40800000, $sp
+
+	;; Figure out where the compressed piggyback image is.
+	;; It is either in [NOR] flash (we don't want to copy it
+	;; to DRAM before unpacking), or copied to DRAM
+	;; by the [NAND] flash boot loader.
+	;; The piggyback image is at _edata, but relative to where the
+	;; image is actually located in memory, not where it is linked
+	;; (the decompressor is linked at 0x40700000+ and runs there).
+	;; Use (_edata - herami) as offset to the current PC.
+
+hereami:
+	lapcq	., $r5		; get PC
+	and.d	0x7fffffff, $r5	; strip any non-cache bit
+	move.d	$r5, $r0	; source address of 'herami'
+	add.d	_edata, $r5
+	sub.d	hereami, $r5	; r5 = flash address of '_edata'
+	move.d	hereami, $r1	; destination
+
+	;; Copy text+data to DRAM
+
+	move.d	_edata, $r2	; end destination
+1:	move.w	[$r0+], $r3	; from herami+ source
+	move.w	$r3, [$r1+]	; to hereami+ destination (linked address)
+	cmp.d	$r2, $r1	; finish when destination == _edata
+	bcs	1b
+	nop
+	move.d	input_data, $r0 ; for the decompressor
+	move.d	$r5, [$r0]	; for the decompressor
+
+	;; Clear the decompressors BSS (between _edata and _end)
+
+	moveq	0, $r0
+	move.d	_edata, $r1
+	move.d	_end, $r2
+1:	move.w	$r0, [$r1+]
+	cmp.d	$r2, $r1
+	bcs	1b
+	nop
+
+	;;  Save command line magic and address.
+	move.d	_cmd_line_magic, $r0
+	move.d  $r10, [$r0]
+	move.d	_cmd_line_addr, $r0
+	move.d  $r11, [$r0]
+
+	;;  Save boot source indicator
+	move.d	_boot_source, $r0
+	move.d	$r12, [$r0]
+
+	;; Do the decompression and save compressed size in _inptr
+
+	jsr	decompress_kernel
+	nop
+
+	;; Restore boot source indicator
+	move.d	_boot_source, $r12
+	move.d	[$r12], $r12
+
+	;; Restore command line magic and address.
+	move.d  _cmd_line_magic, $r10
+	move.d  [$r10], $r10
+	move.d  _cmd_line_addr, $r11
+	move.d  [$r11], $r11
+
+	;; Put start address of root partition in r9 so the kernel can use it
+	;; when mounting from flash
+	move.d  input_data, $r0
+	move.d	[$r0], $r9		; flash address of compressed kernel
+	move.d  inptr, $r0
+	add.d	[$r0], $r9		; size of compressed kernel
+	cmp.d   0x40000000, $r9		; image in DRAM ?
+	blo	enter_kernel		; no, must be [NOR] flash, jump
+	nop				; delay slot
+	and.d   0x001fffff, $r9		; assume compressed kernel was < 2M
+
+enter_kernel:
+	;; Enter the decompressed kernel
+	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
+	jump	0x40004000	; kernel is linked to this address
+	nop
+
+	.data
+
+input_data:
+	.dword	0		; used by the decompressor
+_cmd_line_magic:
+	.dword 0
+_cmd_line_addr:
+	.dword 0
+_boot_source:
+	.dword 0
+
+#if defined CONFIG_ETRAXFS
+#include "../../arch-v32/mach-fs/hw_settings.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../../arch-v32/mach-a3/hw_settings.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
diff --git a/arch/cris/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c
new file mode 100644
index 00000000000..47bc190ba6d
--- /dev/null
+++ b/arch/cris/boot/compressed/misc.c
@@ -0,0 +1,391 @@
+/*
+ * misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * adaptation for Linux/CRIS Axis Communications AB, 1999
+ *
+ */
+
+/* where the piggybacked kernel image expects itself to live.
+ * it is the same address we use when we network load an uncompressed
+ * image into DRAM, and it is the address the kernel is linked to live
+ * at by vmlinux.lds.S
+ */
+
+#define KERNEL_LOAD_ADR 0x40004000
+
+#include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/ser_defs.h>
+#include <hwregs/pinmux_defs.h>
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+#include <hwregs/clkgen_defs.h>
+#endif
+#else
+#include <arch/svinto.h>
+#endif
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args)  args
+#define STATIC static
+
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
+
+#define memzero(s, n)     memset((s), 0, (n))
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define WSIZE 0x8000		/* Window size must be at least 32k, */
+				/* and a power of two */
+
+static uch *inbuf;	     /* input buffer */
+static uch window[WSIZE];    /* Sliding window buffer */
+
+unsigned inptr = 0;	/* index of next byte to be processed in inbuf
+			 * After decompression it will contain the
+			 * compressed size, and head.S will read it.
+			 */
+
+static unsigned outcnt = 0;  /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+#define RESERVED     0xC0 /* bit 6,7:   reserved */
+
+#define get_byte() (inbuf[inptr++])
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
+#  define Trace(x) fprintf x
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
+#else
+#  define Assert(cond, msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
+#endif
+
+static void flush_window(void);
+static void error(char *m);
+static void puts(const char *);
+
+extern char *input_data;  /* lives in head.S */
+
+static long bytes_out;
+static uch *output_data;
+static unsigned long output_ptr;
+
+/* the "heap" is put directly after the BSS ends, at end */
+
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
+
+#include "../../../../../lib/inflate.c"
+
+/* decompressor info and error messages to serial console */
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
+{
+	reg_ser_rs_stat_din rs;
+	reg_ser_rw_dout dout = {.data = *s};
+
+	do {
+		rs = REG_RD(ser, regi_ser, rs_stat_din);
+	}
+	while (!rs.tr_rdy);/* Wait for transceiver. */
+
+	REG_WR(ser, regi_ser, rw_dout, dout);
+}
+#endif
+
+static void puts(const char *s)
+{
+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+	while (*s) {
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
+		serout(s, regi_ser0);
+#else
+		while (!(*R_SERIAL0_STATUS & (1 << 5)))
+			;
+		*R_SERIAL0_TR_DATA = *s++;
+#endif
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
+		serout(s, regi_ser1);
+#else
+		while (!(*R_SERIAL1_STATUS & (1 << 5)))
+			;
+		*R_SERIAL1_TR_DATA = *s++;
+#endif
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
+		serout(s, regi_ser2);
+#else
+		while (!(*R_SERIAL2_STATUS & (1 << 5)))
+			;
+		*R_SERIAL2_TR_DATA = *s++;
+#endif
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
+		serout(s, regi_ser3);
+#else
+		while (!(*R_SERIAL3_STATUS & (1 << 5)))
+			;
+		*R_SERIAL3_TR_DATA = *s++;
+#endif
+#endif
+		*s++;
+	}
+/* CONFIG_ETRAX_DEBUG_PORT_NULL */
+#endif
+}
+
+void *memset(void *s, int c, size_t n)
+{
+	int i;
+	char *ss = (char*)s;
+
+	for (i=0;i<n;i++) ss[i] = c;
+
+	return s;
+}
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
+
+	return __dest;
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+
+static void flush_window(void)
+{
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
+}
+
+static void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted\n");
+
+	while(1);	/* Halt */
+}
+
+void setup_normal_output_buffer(void)
+{
+	output_data = (char *)KERNEL_LOAD_ADR;
+}
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
+{
+	reg_ser_rw_xoff xoff;
+	reg_ser_rw_tr_ctrl tr_ctrl;
+	reg_ser_rw_rec_ctrl rec_ctrl;
+	reg_ser_rw_tr_baud_div tr_baud;
+	reg_ser_rw_rec_baud_div rec_baud;
+
+	/* Turn off XOFF. */
+	xoff = REG_RD(ser, regi_ser, rw_xoff);
+
+	xoff.chr = 0;
+	xoff.automatic = regk_ser_no;
+
+	REG_WR(ser, regi_ser, rw_xoff, xoff);
+
+	/* Set baudrate and stopbits. */
+	tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+	rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+	tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
+	rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
+
+	tr_ctrl.stop_bits = 1;	/* 2 stop bits. */
+	tr_ctrl.en = 1; /* enable transmitter */
+	rec_ctrl.en = 1; /* enabler receiver */
+
+	/*
+	 * The baudrate setup used to be a bit fishy, but now transmitter and
+	 * receiver are both set to the intended baud rate, 115200.
+	 * The magic value is 29.493 MHz.
+	 */
+	tr_ctrl.base_freq = regk_ser_f29_493;
+	rec_ctrl.base_freq = regk_ser_f29_493;
+	tr_baud.div = (29493000 / 8) / 115200;
+	rec_baud.div = (29493000 / 8) / 115200;
+
+	REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+	REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
+	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
+}
+#endif
+
+void decompress_kernel(void)
+{
+	char revision;
+	char compile_rev;
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+	/* Need at least a CRISv32 to run. */
+	compile_rev = 32;
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT3)
+	reg_pinmux_rw_hwprot hwprot;
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+	reg_clkgen_rw_clk_ctrl clk_ctrl;
+
+	/* Enable corresponding clock region when serial 1..3 selected */
+
+	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
+	clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
+	REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
+#endif
+
+	/* pinmux setup for ports 1..3 */
+	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
+#endif
+
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	serial_setup(regi_ser0);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	hwprot.ser1 = regk_pinmux_yes;
+	serial_setup(regi_ser1);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	hwprot.ser2 = regk_pinmux_yes;
+	serial_setup(regi_ser2);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	hwprot.ser3 = regk_pinmux_yes;
+	serial_setup(regi_ser3);
+#endif
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT3)
+	REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
+#endif
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+#else /* CRISv10 */
+	/* Need at least a crisv10 to run. */
+	compile_rev = 10;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	*R_SERIAL0_XOFF = 0;
+	*R_SERIAL0_BAUD = 0x99;
+	*R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	*R_SERIAL1_XOFF = 0;
+	*R_SERIAL1_BAUD = 0x99;
+	*R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	*R_GEN_CONFIG = 0x08;
+	*R_SERIAL2_XOFF = 0;
+	*R_SERIAL2_BAUD = 0x99;
+	*R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	*R_GEN_CONFIG = 0x100;
+	*R_SERIAL3_XOFF = 0;
+	*R_SERIAL3_BAUD = 0x99;
+	*R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
+
+	setup_normal_output_buffer();
+
+	makecrc();
+
+	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
+	if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+		puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
+		while(1);
+	}
+
+	puts("Uncompressing Linux...\n");
+	gunzip();
+	puts("Done. Now booting the kernel\n");
+}
diff --git a/arch/cris/boot/rescue/Makefile b/arch/cris/boot/rescue/Makefile
new file mode 100644
index 00000000000..52bd0bd1dd2
--- /dev/null
+++ b/arch/cris/boot/rescue/Makefile
@@ -0,0 +1,47 @@
+#
+# Makefile for rescue (bootstrap) code
+#
+
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# 				    -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
+
+targets := rescue.o rescue.bin
+
+$(obj)/rescue.o: $(OBJECTS) FORCE
+	$(call if_changed,ld)
+
+$(obj)/rescue.bin: $(obj)/rescue.o FORCE
+	$(call if_changed,objcopy)
+	cp -p $(obj)/rescue.bin $(objtree)
+
+$(obj)/testrescue.bin: $(obj)/testrescue.o
+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
+# Pad it to 784 bytes
+	dd if=/dev/zero of=tmp2423 bs=1 count=784
+	cat tr.bin tmp2423 >testrescue_tmp.bin
+	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
+	rm tr.bin tmp2423 testrescue_tmp.bin
+
+
+$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
+	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
+# Pad it to 784 bytes, that's what the rescue loader expects
+	dd if=/dev/zero of=tmp2423 bs=1 count=784
+	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
+	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
+	rm ktr.bin tmp2423 kimagerescue_tmp.bin
+
diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S
new file mode 100644
index 00000000000..2fafe247a25
--- /dev/null
+++ b/arch/cris/boot/rescue/head_v10.S
@@ -0,0 +1,360 @@
+/*
+ * Rescue code, made to reside at the beginning of the
+ * flash-memory. when it starts, it checks a partition
+ * table at the first sector after the rescue sector.
+ * the partition table was generated by the product builder
+ * script and contains offsets, lengths, types and checksums
+ * for each partition that this code should check.
+ *
+ * If any of the checksums fail, we assume the flash is so
+ * corrupt that we cant use it to boot into the ftp flash
+ * loader, and instead we initialize the serial port to
+ * receive a flash-loader and new flash image. we dont include
+ * any flash code here, but just accept a certain amount of
+ * bytes from the serial port and jump into it. the downloaded
+ * code is put in the cache.
+ *
+ * The partitiontable is designed so that it is transparent to
+ * code execution - it has a relative branch opcode in the
+ * beginning that jumps over it. each entry contains extra
+ * data so we can add stuff later.
+ *
+ * Partition table format:
+ *
+ *     Code transparency:
+ *
+ *     2 bytes    [opcode 'nop']
+ *     2 bytes    [opcode 'di']
+ *     4 bytes    [opcode 'ba <offset>', 8-bit or 16-bit version]
+ *     2 bytes    [opcode 'nop', delay slot]
+ *
+ *     Table validation (at +10):
+ *
+ *     2 bytes    [magic/version word for partitiontable - 0xef, 0xbe]
+ *     2 bytes    [length of all entries plus the end marker]
+ *     4 bytes    [checksum for the partitiontable itself]
+ *
+ *     Entries, each with the following format, last has offset -1:
+ *
+ *        4 bytes    [offset in bytes, from start of flash]
+ *        4 bytes    [length in bytes of partition]
+ *        4 bytes    [checksum, simple longword sum]
+ *        2 bytes    [partition type]
+ *        2 bytes    [flags, only bit 0 used, ro/rw = 1/0]
+ *        16 bytes   [reserved for future use]
+ *
+ *     End marker
+ *
+ *        4 bytes    [-1]
+ *
+ *	 10 bytes    [0, padding]
+ *
+ * Bit 0 in flags signifies RW or RO. The rescue code only bothers
+ * to check the checksum for RO partitions, since the others will
+ * change their data without updating the checksums. A 1 in bit 0
+ * means RO, 0 means RW. That way, it is possible to set a partition
+ * in RO mode initially, and later mark it as RW, since you can always
+ * write 0's to the flash.
+ *
+ * During the wait for serial input, the status LED will flash so the
+ * user knows something went wrong.
+ *
+ * Copyright (C) 1999-2007 Axis Communications AB
+ */
+
+#ifdef CONFIG_ETRAX_AXISFLASHMAP
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+	;; The partitiontable is looked for at the first sector after the boot
+	;; sector. Sector size is 65536 bytes in all flashes we use.
+
+#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
+#define PTABLE_MAGIC 0xbeef
+
+	;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
+	;; That is not where we put our downloaded serial boot-code.
+	;; The length is enough for downloading code that loads the rest
+	;; of itself (after having setup the DRAM etc).
+	;; It is the same length as the on-chip ROM loads, so the same
+	;; host loader can be used to load a rescued product as well as
+	;; one booted through the Etrax serial boot code.
+
+#define CODE_START 0x40000000
+#define CODE_LENGTH 784
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+#define NOP_DI 0xf025050f
+#define RAM_INIT_MAGIC 0x56902387
+
+	.text
+
+	;; This is the entry point of the rescue code
+	;; 0x80000000 if loaded in flash (as it should be)
+	;; Since etrax actually starts at address 2 when booting from flash, we
+	;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+	nop
+	di
+
+	jump	in_cache	; enter cached area instead
+in_cache:
+
+
+	;; First put a jump test to give a possibility of upgrading the
+	;; rescue code without erasing/reflashing the sector.
+	;; We put a longword of -1 here and if it is not -1, we jump using
+	;; the value as jump target. Since we can always change 1's to 0's
+	;; without erasing the sector, it is possible to add new
+	;; code after this and altering the jumptarget in an upgrade.
+
+jtcd:	move.d	[jumptarget], $r0
+	cmp.d	0xffffffff, $r0
+	beq	no_newjump
+	nop
+
+	jump	[$r0]
+
+jumptarget:
+	.dword	0xffffffff	; can be overwritten later to insert new code
+
+no_newjump:
+#ifdef CONFIG_ETRAX_ETHERNET
+	;; Start MII clock to make sure it is running when tranceiver is reset
+	move.d 0x3, $r0    ; enable = on, phy = mii_clk
+	move.d $r0, [R_NETWORK_GEN_CONFIG]
+#endif
+
+	;; We need to setup the bus registers before we start using the DRAM
+#include "../../../arch-v10/lib/dram_init.S"
+
+	;; we now should go through the checksum-table and check the listed
+	;; partitions for errors.
+
+	move.d	PTABLE_START, $r3
+	move.d	[$r3], $r0
+	cmp.d	NOP_DI, $r0	; make sure the nop/di is there...
+	bne	do_rescue
+	nop
+
+	;; skip the code transparency block (10 bytes).
+
+	addq	10, $r3
+
+	;; check for correct magic
+
+	move.w	[$r3+], $r0
+	cmp.w	PTABLE_MAGIC, $r0
+	bne	do_rescue	; didn't recognize - trig rescue
+	nop
+
+	;; check for correct ptable checksum
+
+	movu.w	[$r3+], $r2	; ptable length
+	move.d	$r2, $r8	; save for later, length of total ptable
+	addq	28, $r8		; account for the rest
+	move.d	[$r3+], $r4	; ptable checksum
+	move.d	$r3, $r1
+	jsr	checksum	; r1 source, r2 length, returns in r0
+
+	cmp.d	$r0, $r4
+	bne	do_rescue	; didn't match - trig rescue
+	nop
+
+	;; ptable is ok. validate each entry.
+
+	moveq	-1, $r7
+
+ploop:	move.d	[$r3+], $r1	; partition offset (from ptable start)
+	bne	notfirst	; check if it is the partition containing ptable
+	nop			; yes..
+	move.d	$r8, $r1	; for its checksum check, skip the ptable
+	move.d	[$r3+], $r2	; partition length
+	sub.d	$r8, $r2	; minus the ptable length
+	ba	bosse
+	nop
+notfirst:
+	cmp.d	-1, $r1		; the end of the ptable ?
+	beq	flash_ok	;   if so, the flash is validated
+	move.d	[$r3+], $r2	; partition length
+bosse:	move.d	[$r3+], $r5	; checksum
+	move.d	[$r3+], $r4	; type and flags
+	addq	16, $r3		; skip the reserved bytes
+	btstq	16, $r4		; check ro flag
+	bpl	ploop		;   rw partition, skip validation
+	nop
+	btstq	17, $r4		; check bootable flag
+	bpl	1f
+	nop
+	move.d	$r1, $r7	; remember boot partition offset
+1:
+	add.d	PTABLE_START, $r1
+
+	jsr	checksum	; checksum the partition
+
+	cmp.d	$r0, $r5
+	beq	ploop		; checksums matched, go to next entry
+	nop
+
+	;; otherwise fall through to the rescue code.
+
+do_rescue:
+	;; setup port PA and PB default initial directions and data
+	;; (so we can flash LEDs, and so that DTR and others are set)
+
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+	move.b	$r0, [R_PORT_PA_DIR]
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+	move.b	$r0, [R_PORT_PA_DATA]
+
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+	move.b	$r0, [R_PORT_PB_DIR]
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+	move.b	$r0, [R_PORT_PB_DATA]
+
+	;; setup the serial port at 115200 baud
+
+	moveq	0, $r0
+	move.d	$r0, [SERXOFF]
+
+	move.b	0x99, $r0
+	move.b	$r0, [SERBAUD]	; 115.2kbaud for both transmit and receive
+
+	move.b	0x40, $r0	; rec enable
+	move.b	$r0, [SERRECC]
+
+	moveq	0, $r1		; "timer" to clock out a LED red flash
+	move.d	CODE_START, $r3	; destination counter
+	movu.w	CODE_LENGTH, $r4; length
+
+wait_ser:
+	addq	1, $r1
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+	move.d	(1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+	btstq	16, $r1
+	bpl	1f
+	nop
+	or.d	$r0, $r2	; set bit
+	ba	2f
+	nop
+1:	not	$r0		; clear bit
+	and.d	$r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+	move.b	$r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+	move.b	$r2, [R_PORT_PB_DATA]
+#endif
+#ifdef CONFIG_ETRAX_90000000_LEDS
+	move.b	$r2, [0x90000000]
+#endif
+#endif
+
+	;; check if we got something on the serial port
+
+	move.b	[SERSTAT], $r0
+	btstq	0, $r0		; data_avail
+	bpl	wait_ser
+	nop
+
+	;; got something - copy the byte and loop
+
+	move.b	[SERRDAT], $r0
+	move.b	$r0, [$r3+]
+
+	subq	1, $r4		; decrease length
+	bne	wait_ser
+	nop
+
+	;; jump into downloaded code
+
+	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
+					; initialized
+	jump	CODE_START
+
+flash_ok:
+	;; check r7, which contains either -1 or the partition to boot from
+
+	cmp.d	-1, $r7
+	bne	1f
+	nop
+	move.d	PTABLE_START, $r7; otherwise use the ptable start
+1:
+	move.d	RAM_INIT_MAGIC, $r8	; Tell next product that DRAM is
+					; initialized
+	jump	$r7		; boot!
+
+
+	;; Helper subroutines
+
+	;; Will checksum by simple addition
+	;; r1 - source
+	;; r2 - length in bytes
+	;; result will be in r0
+checksum:
+	moveq	0, $r0
+	moveq   CONFIG_ETRAX_FLASH1_SIZE, $r6
+
+	;; If the first physical flash memory is exceeded wrap to the
+	;; second one
+	btstq	26, $r1		; Are we addressing first flash?
+	bpl	1f
+	nop
+	clear.d	$r6
+
+1:	test.d  $r6		; 0 = no wrapping
+	beq	2f
+	nop
+	lslq	20, $r6		; Convert MB to bytes
+	sub.d	$r1, $r6
+
+2:	addu.b	[$r1+], $r0
+	subq	1, $r6		; Flash memory left
+	beq	3f
+	subq	1, $r2		; Length left
+	bne	2b
+	nop
+	ret
+	nop
+
+3:	move.d	MEM_CSE1_START, $r1 ; wrap to second flash
+	ba	2b
+	nop
+
+#endif
diff --git a/arch/cris/boot/rescue/head_v32.S b/arch/cris/boot/rescue/head_v32.S
new file mode 100644
index 00000000000..5f846b7700a
--- /dev/null
+++ b/arch/cris/boot/rescue/head_v32.S
@@ -0,0 +1,26 @@
+/*
+ * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start
+ * kernel decompressor.
+ *
+ * In practice, this only works for NOR flash (or some convoluted RAM boot)
+ * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only.
+ *
+ */
+
+#include <mach/startup.inc>
+
+#ifdef CONFIG_ETRAX_AXISFLASHMAP
+
+;; Code
+
+	.text
+start:
+
+	;; Start clocks for used blocks.
+	START_CLOCKS
+
+	move.d	CONFIG_ETRAX_PTABLE_SECTOR, $r10
+	jump	$r10			; Jump to decompressor
+	nop
+
+#endif
diff --git a/arch/cris/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S
new file mode 100644
index 00000000000..6f7b3e61260
--- /dev/null
+++ b/arch/cris/boot/rescue/kimagerescue.S
@@ -0,0 +1,143 @@
+/*
+ * Rescue code to be prepended on a kimage and copied to the
+ * rescue serial port.
+ * This is called from the rescue code, it will copy received data to
+ * 4004000 and after a timeout jump to it.
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+#define CODE_START 0x40004000
+#define CODE_LENGTH 784
+#define TIMEOUT_VALUE 1000
+
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+	.text
+	;; This is the entry point of the rescue code
+	;; 0x80000000 if loaded in flash (as it should be)
+	;; since etrax actually starts at address 2 when booting from flash, we
+	;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+	nop
+	di
+#ifndef CONFIG_SVINTO_SIM
+	;; setup port PA and PB default initial directions and data
+	;; (so we can flash LEDs, and so that DTR and others are set)
+
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+	move.b	$r0, [R_PORT_PA_DIR]
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+	move.b	$r0, [R_PORT_PA_DATA]
+
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+	move.b	$r0, [R_PORT_PB_DIR]
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+	move.b	$r0, [R_PORT_PB_DATA]
+
+	;; We need to setup the bus registers before we start using the DRAM
+#include "../../lib/dram_init.S"
+
+#endif
+	;; Setup the stack to a suitably high address.
+	;; We assume 8 MB is the minimum DRAM in an eLinux
+	;; product and put the sp at the top for now.
+
+	move.d	0x40800000, $sp
+
+	;; setup the serial port at 115200 baud
+
+	moveq	0, $r0
+	move.d	$r0, [SERXOFF]
+
+	move.b	0x99, $r0
+	move.b	$r0, [SERBAUD]		; 115.2kbaud for both transmit
+					; and receive
+
+	move.b	0x40, $r0		; rec enable
+	move.b	$r0, [SERRECC]
+
+
+	moveq	0, $r1			; "timer" to clock out a LED red flash
+	move.d	CODE_START, $r3		; destination counter
+	move.d	CODE_LENGTH, $r4	; length
+	move.d	TIMEOUT_VALUE, $r5	; "timeout" until jump
+
+wait_ser:
+	addq	1, $r1
+	subq	1, $r5			; decrease timeout
+	beq	jump_start		; timed out
+	nop
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+	move.b	CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+	move.d	(1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+	btstq	16, $r1
+	bpl	1f
+	nop
+	or.d	$r0, $r2		; set bit
+	ba	2f
+	nop
+1:	not	$r0			; clear bit
+	and.d	$r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+	move.b	$r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+	move.b	$r2, [R_PORT_PB_DATA]
+#endif
+#endif
+
+	;; check if we got something on the serial port
+
+	move.b	[SERSTAT], $r0
+	btstq	0, $r0			; data_avail
+	bpl	wait_ser
+	nop
+
+	;; got something - copy the byte and loop
+
+	move.b	[SERRDAT], $r0
+	move.b	$r0, [$r3+]
+	move.d	TIMEOUT_VALUE, $r5	; reset "timeout"
+	subq	1, $r4			; decrease length
+	bne	wait_ser
+	nop
+jump_start:
+	;; jump into downloaded code
+
+	jump	CODE_START
diff --git a/arch/cris/boot/rescue/rescue_v10.lds b/arch/cris/boot/rescue/rescue_v10.lds
new file mode 100644
index 00000000000..0b52a9490db
--- /dev/null
+++ b/arch/cris/boot/rescue/rescue_v10.lds
@@ -0,0 +1,20 @@
+MEMORY 
+	{
+	flash : ORIGIN = 0x00000000,
+	        LENGTH = 0x00100000
+	}
+
+SECTIONS
+{
+	.text :
+	{
+		stext = . ;
+		*(.text)
+		etext = . ;
+	} > flash
+	.data :
+	{
+		*(.data)
+		edata = . ;
+	} > flash
+}
diff --git a/arch/cris/boot/rescue/rescue_v32.lds b/arch/cris/boot/rescue/rescue_v32.lds
new file mode 100644
index 00000000000..8ac646bc1a2
--- /dev/null
+++ b/arch/cris/boot/rescue/rescue_v32.lds
@@ -0,0 +1,43 @@
+/*#OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_ARCH (crisv32)
+/* Now that NAND support has been stripped, this file could be simplified,
+ * but it doesn't do any harm on the other hand so why bother. */
+
+MEMORY
+	{
+	bootblk : ORIGIN = 0x38000000,
+	          LENGTH = 0x00004000
+	intmem  : ORIGIN = 0x38004000,
+		  LENGTH = 0x00005000
+	}
+
+SECTIONS
+{
+	.text :
+	{
+		_stext = . ;
+		*(.text)
+		*(.init.text)
+		*(.rodata)
+		*(.rodata.*)
+		_etext = . ;
+	} > bootblk
+	.data :
+	{
+		*(.data)
+		_edata = . ;
+	} > bootblk
+	.bss :
+	{
+		_bss = . ;
+		*(.bss)
+		_end = ALIGN( 0x10 ) ;
+	} > intmem
+
+	/* Get rid of stuff from EXPORT_SYMBOL(foo). */
+	/DISCARD/ :
+	{
+	        *(__ksymtab_strings)
+	        *(__ksymtab)
+	}
+}
diff --git a/arch/cris/boot/rescue/testrescue.S b/arch/cris/boot/rescue/testrescue.S
new file mode 100644
index 00000000000..fc7ec674eca
--- /dev/null
+++ b/arch/cris/boot/rescue/testrescue.S
@@ -0,0 +1,24 @@
+/*
+ * Simple testcode to download by the rescue block.
+ * Just lights some LEDs to show it was downloaded correctly.
+ *
+ * Copyright (C) 1999 Axis Communications AB
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+	.text
+
+	nop
+	nop
+	moveq	-1, $r2
+	move.b	$r2, [R_PORT_PA_DIR]
+	moveq	0, $r2
+	move.b	$r2, [R_PORT_PA_DATA]
+
+endless:
+	nop
+	ba	endless
+	nop
+
diff --git a/arch/cris/boot/tools/build.c b/arch/cris/boot/tools/build.c
new file mode 100644
index 00000000000..c8adef36416
--- /dev/null
+++ b/arch/cris/boot/tools/build.c
@@ -0,0 +1,287 @@
+/*
+ *  linux/tools/build.c
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ */
+
+#include <stdio.h>	/* fprintf */
+#include <string.h>
+#include <stdlib.h>	/* contains exit */
+#include <sys/types.h>	/* unistd.h needs this */
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h>	/* contains read/write */
+#include <fcntl.h>
+#include <errno.h>
+
+#define MINIX_HEADER 32
+
+#define N_MAGIC_OFFSET 1024
+#ifndef __BFD__
+static int GCC_HEADER = sizeof(struct exec);
+#endif
+
+#ifdef __BIG_KERNEL__
+#define SYS_SIZE 0xffff
+#else
+#define SYS_SIZE DEF_SYSSIZE
+#endif
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* max nr of sectors of setup: don't change unless you also change
+ * bootsect etc */
+#define SETUP_SECTS 4
+
+#define STRINGIFY(x) #x
+
+typedef union {
+	int i;
+	long l;
+	short s[2];
+	char b[4];
+} conv;
+
+long intel_long(long l)
+{
+	conv t;
+
+	t.b[0] = l & 0xff; l >>= 8;
+	t.b[1] = l & 0xff; l >>= 8;
+	t.b[2] = l & 0xff; l >>= 8;
+	t.b[3] = l & 0xff; l >>= 8;
+	return t.l;
+}
+
+int intel_int(int i)
+{
+	conv t;
+
+	t.b[0] = i & 0xff; i >>= 8;
+        t.b[1] = i & 0xff; i >>= 8;
+        t.b[2] = i & 0xff; i >>= 8;
+        t.b[3] = i & 0xff; i >>= 8;
+        return t.i;
+}
+
+short intel_short(short l)
+{
+	conv t;
+
+	t.b[0] = l & 0xff; l >>= 8;
+	t.b[1] = l & 0xff; l >>= 8;
+	return t.s[0];
+}
+
+void die(const char * str)
+{
+	fprintf(stderr,"%s\n",str);
+	exit(1);
+}
+
+void usage(void)
+{
+	die("Usage: build bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char ** argv)
+{
+	int i,c,id,sz,tmp_int;
+	unsigned long sys_size, tmp_long;
+	char buf[1024];
+#ifndef __BFD__
+	struct exec *ex = (struct exec *)buf;
+#endif
+	char major_root, minor_root;
+	struct stat sb;
+	unsigned char setup_sectors;
+
+	if ((argc < 4) || (argc > 5))
+		usage();
+	if (argc > 4) {
+		if (!strcmp(argv[4], "CURRENT")) {
+			if (stat("/", &sb)) {
+				perror("/");
+				die("Couldn't stat /");
+			}
+			major_root = major(sb.st_dev);
+			minor_root = minor(sb.st_dev);
+		} else if (strcmp(argv[4], "FLOPPY")) {
+			if (stat(argv[4], &sb)) {
+				perror(argv[4]);
+				die("Couldn't stat root device.");
+			}
+			major_root = major(sb.st_rdev);
+			minor_root = minor(sb.st_rdev);
+		} else {
+			major_root = 0;
+			minor_root = 0;
+		}
+	} else {
+		major_root = DEFAULT_MAJOR_ROOT;
+		minor_root = DEFAULT_MINOR_ROOT;
+	}
+	fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+	for (i=0;i<sizeof buf; i++) buf[i]=0;
+	if ((id=open(argv[1],O_RDONLY,0))<0)
+		die("Unable to open 'boot'");
+	if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+		die("Unable to read header of 'boot'");
+	if (((long *) buf)[0]!=intel_long(0x04100301))
+		die("Non-Minix header of 'boot'");
+	if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+		die("Non-Minix header of 'boot'");
+	if (((long *) buf)[3] != 0)
+		die("Illegal data segment in 'boot'");
+	if (((long *) buf)[4] != 0)
+		die("Illegal bss in 'boot'");
+	if (((long *) buf)[5] != 0)
+		die("Non-Minix header of 'boot'");
+	if (((long *) buf)[7] != 0)
+		die("Illegal symbol table in 'boot'");
+	i=read(id,buf,sizeof buf);
+	fprintf(stderr,"Boot sector %d bytes.\n",i);
+	if (i != 512)
+		die("Boot block must be exactly 512 bytes");
+	if ((*(unsigned short *)(buf+510)) != (unsigned short)intel_short(0xAA55))
+		die("Boot block hasn't got boot flag (0xAA55)");
+	buf[508] = (char) minor_root;
+	buf[509] = (char) major_root;	
+	i=write(1,buf,512);
+	if (i!=512)
+		die("Write call failed");
+	close (id);
+	
+	if ((id=open(argv[2],O_RDONLY,0))<0)
+		die("Unable to open 'setup'");
+	if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+		die("Unable to read header of 'setup'");
+	if (((long *) buf)[0]!=intel_long(0x04100301))
+		die("Non-Minix header of 'setup'");
+	if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+		die("Non-Minix header of 'setup'");
+	if (((long *) buf)[3] != 0)
+		die("Illegal data segment in 'setup'");
+	if (((long *) buf)[4] != 0)
+		die("Illegal bss in 'setup'");
+	if (((long *) buf)[5] != 0)
+		die("Non-Minix header of 'setup'");
+	if (((long *) buf)[7] != 0)
+		die("Illegal symbol table in 'setup'");
+	for (i=0 ; (c=read(id,buf,sizeof buf))>0 ; i+=c )
+#ifdef __BIG_KERNEL__
+	{
+		if (!i) {
+			/* Working with memcpy because of alignment constraints
+			   on Sparc - Gertjan */
+			memcpy(&tmp_long, &buf[2], sizeof(long));
+			if (tmp_long != intel_long(0x53726448) )
+				die("Wrong magic in loader header of 'setup'");
+			memcpy(&tmp_int, &buf[6], sizeof(int));
+			if (tmp_int < intel_int(0x200))
+				die("Wrong version of loader header of 'setup'");
+			buf[0x11] = 1; /* LOADED_HIGH */
+			tmp_long = intel_long(0x100000);
+			memcpy(&buf[0x14], &tmp_long, sizeof(long));  /* code32_start */
+		}
+#endif
+		if (write(1,buf,c)!=c)
+			die("Write call failed");
+#ifdef __BIG_KERNEL__
+	}
+#endif
+	if (c != 0)
+		die("read-error on 'setup'");
+	close (id);
+	setup_sectors = (unsigned char)((i + 511) / 512);
+	/* for compatibility with LILO */
+	if (setup_sectors < SETUP_SECTS)
+		setup_sectors = SETUP_SECTS;
+	fprintf(stderr,"Setup is %d bytes.\n",i);
+	for (c=0 ; c<sizeof(buf) ; c++)
+		buf[c] = '\0';
+	while (i < setup_sectors * 512) {
+		c = setup_sectors * 512 - i;
+		if (c > sizeof(buf))
+			c = sizeof(buf);
+		if (write(1,buf,c) != c)
+			die("Write call failed");
+		i += c;
+	}
+	
+	if ((id=open(argv[3],O_RDONLY,0))<0)
+		die("Unable to open 'system'");
+#ifndef __BFD__
+	if (read(id,buf,GCC_HEADER) != GCC_HEADER)
+		die("Unable to read header of 'system'");
+	if (N_MAGIC(*ex) == ZMAGIC) {
+		GCC_HEADER = N_MAGIC_OFFSET;
+		lseek(id, GCC_HEADER, SEEK_SET);
+	} else if (N_MAGIC(*ex) != QMAGIC)
+		die("Non-GCC header of 'system'");
+	fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n",
+		(ex->a_text+ex->a_data+ex->a_bss)/1024,
+		ex->a_text /1024,
+		ex->a_data /1024,
+		ex->a_bss  /1024);
+	sz = N_SYMOFF(*ex) - GCC_HEADER + 4;
+#else
+	if (fstat (id, &sb)) {
+	  perror ("fstat");
+	  die ("Unable to stat 'system'");
+	}
+	sz = sb.st_size;
+	fprintf (stderr, "System is %d kB\n", sz/1024);
+#endif
+	sys_size = (sz + 15) / 16;
+	if (sys_size > SYS_SIZE)
+		die("System is too big");
+	while (sz > 0) {
+		int l, n;
+
+		l = sz;
+		if (l > sizeof(buf))
+			l = sizeof(buf);
+		if ((n=read(id, buf, l)) != l) {
+			if (n == -1) 
+				perror(argv[1]);
+			else
+				fprintf(stderr, "Unexpected EOF\n");
+			die("Can't read 'system'");
+		}
+		if (write(1, buf, l) != l)
+			die("Write failed");
+		sz -= l;
+	}
+	close(id);
+	if (lseek(1, 497, 0) == 497) {
+		if (write(1, &setup_sectors, 1) != 1)
+			die("Write of setup sectors failed");
+	}
+	if (lseek(1,500,0) == 500) {
+		buf[0] = (sys_size & 0xff);
+		buf[1] = ((sys_size >> 8) & 0xff);
+		if (write(1, buf, 2) != 2)
+			die("Write failed");
+	}
+	return(0);
+}
-- 
cgit v1.2.3


From d7bd15f67ebaaebc842a971e600c364a73b81b22 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 21 Apr 2009 13:10:33 +0200
Subject: CRISv32: Remove obsolete vcs_hook.o from Makefile

On Sun, Apr 19, 2009 at 10:01:50PM +0200, Robert P. J. Day wrote:
> ./arch/cris/arch-v32/kernel/Makefile:obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
>
>   there appears to be no definition of ETRAXFS_SIM anywhere.

There hasn't been a vcs_hook.c file here for ages.
Remove the line from the Makefile.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
---
 arch/cris/arch-v32/kernel/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile
index 993d987b007..40358355d0c 100644
--- a/arch/cris/arch-v32/kernel/Makefile
+++ b/arch/cris/arch-v32/kernel/Makefile
@@ -9,8 +9,6 @@ obj-y   := entry.o traps.o irq.o debugport.o \
 	   process.o ptrace.o setup.o signal.o traps.o time.o \
 	   cache.o cacheflush.o
 
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
-- 
cgit v1.2.3


From 818cf5909701806285d977f7a9365c5cadb062a7 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Thu, 23 Apr 2009 09:58:22 +0300
Subject: slub: enforce MAX_ORDER

slub_max_order may not be equal to or greater than MAX_ORDER.

Additionally, if a single object cannot be placed in a slab of
slub_max_order, it still must allocate slabs below MAX_ORDER.

Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 mm/slub.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/slub.c b/mm/slub.c
index 7ab54ecbd3f..0e1247ed2a0 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1909,7 +1909,7 @@ static inline int calculate_order(int size)
 	 * Doh this slab cannot be placed using slub_max_order.
 	 */
 	order = slab_order(size, 1, MAX_ORDER, 1);
-	if (order <= MAX_ORDER)
+	if (order < MAX_ORDER)
 		return order;
 	return -ENOSYS;
 }
@@ -2522,6 +2522,7 @@ __setup("slub_min_order=", setup_slub_min_order);
 static int __init setup_slub_max_order(char *str)
 {
 	get_option(&str, &slub_max_order);
+	slub_max_order = min(slub_max_order, MAX_ORDER - 1);
 
 	return 1;
 }
-- 
cgit v1.2.3


From 45cb50e646d1560eff01c5ad0f0df3c7fd6148dd Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Fri, 24 Apr 2009 12:13:18 -0400
Subject: ACPI video: dmi check for broken _BQC on Acer Aspire 5720

On Acer Aspire 5720, _BQC always returns a value 9 smaller than
the actual brightness level.  Add dmi quirk for this laptop.

http://bugzilla.kernel.org/show_bug.cgi?id=13121

Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index cd4fb7543a9..7e8ee49ebd4 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -538,6 +538,33 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 	return -EINVAL;
 }
 
+/*
+ * For some buggy _BQC methods, we need to add a constant value to
+ * the _BQC return value to get the actual current brightness level
+ */
+
+static int bqc_offset_aml_bug_workaround;
+static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+{
+	bqc_offset_aml_bug_workaround = 9;
+	return 0;
+}
+
+static struct dmi_system_id video_dmi_table[] __initdata = {
+	/*
+	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+	 */
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5720",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+		},
+	},
+	{}
+};
+
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 					unsigned long long *level)
@@ -557,6 +584,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 				*level = device->brightness->levels[*level + 2];
 
 			}
+			*level += bqc_offset_aml_bug_workaround;
 			device->brightness->curr = *level;
 			return 0;
 		} else {
@@ -2287,6 +2315,8 @@ EXPORT_SYMBOL(acpi_video_register);
 
 static int __init acpi_video_init(void)
 {
+	dmi_check_system(video_dmi_table);
+
 	if (intel_opregion_present())
 		return 0;
 
-- 
cgit v1.2.3


From d0687be7c7ae21461da4438d5fd059b48487bfe1 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Fri, 3 Apr 2009 15:18:24 -0500
Subject: svcrdma: Fix dma map direction for rdma read targets

The nfs server rdma transport was mapping rdma read target pages for
TO_DEVICE instead of FROM_DEVICE.  This causes data corruption on non
cache-coherent systems if frmrs are used.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 629a28764da..42a6f9f2028 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -265,7 +265,7 @@ static int fast_reg_read_chunks(struct svcxprt_rdma *xprt,
 		frmr->page_list->page_list[page_no] =
 			ib_dma_map_single(xprt->sc_cm_id->device,
 					  page_address(rqstp->rq_arg.pages[page_no]),
-					  PAGE_SIZE, DMA_TO_DEVICE);
+					  PAGE_SIZE, DMA_FROM_DEVICE);
 		if (ib_dma_mapping_error(xprt->sc_cm_id->device,
 					 frmr->page_list->page_list[page_no]))
 			goto fatal_err;
-- 
cgit v1.2.3


From 51e95bed6263f6a2e558ca04fc4ff877f3b0cca3 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Fri, 24 Apr 2009 16:26:25 -0700
Subject: slub: add Documentation/ABI/testing/sysfs-kernel-slab

Adds documentation for the slub ABI.

This is placed in the `testing' directory since the meanings of these
files are still subject to change as slub is developed.

Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 Documentation/ABI/testing/sysfs-kernel-slab | 479 ++++++++++++++++++++++++++++
 1 file changed, 479 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-kernel-slab

diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
new file mode 100644
index 00000000000..6dcf75e594f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -0,0 +1,479 @@
+What:		/sys/kernel/slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The /sys/kernel/slab directory contains a snapshot of the
+		internal state of the SLUB allocator for each cache.  Certain
+		files may be modified to change the behavior of the cache (and
+		any cache it aliases, if any).
+Users:		kernel memory tuning tools
+
+What:		/sys/kernel/slab/cache/aliases
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The aliases file is read-only and specifies how many caches
+		have merged into this cache.
+
+What:		/sys/kernel/slab/cache/align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The align file is read-only and specifies the cache's object
+		alignment in bytes.
+
+What:		/sys/kernel/slab/cache/alloc_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_calls file is read-only and lists the kernel code
+		locations from which allocations for this cache were performed.
+		The alloc_calls file only contains information if debugging is
+		enabled for that cache (see Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/alloc_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_fastpath file is read-only and specifies how many
+		objects have been allocated using the fast path.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_from_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_from_partial file is read-only and specifies how
+		many times a cpu slab has been full and it has been refilled
+		by using a slab from the list of partially used slabs.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_refill
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_refill file is read-only and specifies how many
+		times the per-cpu freelist was empty but there were objects
+		available as the result of remote cpu frees.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slab file is read-only and specifies how many times
+		a new slab had to be allocated from the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slowpath file is read-only and specifies how many
+		objects have been allocated using the slow path because of a
+		refill or allocation from a partial or new slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/cache_dma
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cache_dma file is read-only and specifies whether objects
+		are from ZONE_DMA.
+		Available when CONFIG_ZONE_DMA is enabled.
+
+What:		/sys/kernel/slab/cache/cpu_slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cpu_slabs file is read-only and displays how many cpu slabs
+		are active and their NUMA locality.
+
+What:		/sys/kernel/slab/cache/cpuslab_flush
+Date:		April 2009
+KernelVersion:	2.6.31
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file cpuslab_flush is read-only and specifies how many
+		times a cache's cpu slabs have been flushed as the result of
+		destroying or shrinking a cache, a cpu going offline, or as
+		the result of forcing an allocation from a certain node.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/ctor
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The ctor file is read-only and specifies the cache's object
+		constructor function, which is invoked for each object when a
+		new slab is allocated.
+
+What:		/sys/kernel/slab/cache/deactivate_empty
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_empty is read-only and specifies how many
+		times an empty cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_full
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_full is read-only and specifies how many
+		times a full cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_remote_frees
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_remote_frees is read-only and specifies how
+		many times a cpu slab has been deactivated and contained free
+		objects that were freed remotely.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_head
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_head is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		head of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_tail
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_tail is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		tail of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/destroy_by_rcu
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The destroy_by_rcu file is read-only and specifies whether
+		slabs (not objects) are freed by rcu.
+
+What:		/sys/kernel/slab/cache/free_add_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_add_partial is read-only and specifies how many
+		times an object has been freed in a full slab so that it had to
+		added to its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_calls file is read-only and lists the locations of
+		object frees if slab debugging is enabled (see
+		Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/free_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_fastpath file is read-only and specifies how many
+		objects have been freed using the fast path because it was an
+		object from the cpu slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_frozen
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_frozen file is read-only and specifies how many
+		objects have been freed to a frozen slab (i.e. a remote cpu
+		slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_remove_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_remove_partial is read-only and specifies how
+		many times an object has been freed to a now-empty slab so
+		that it had to be removed from its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slab file is read-only and specifies how many times an
+		empty slab has been freed back to the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slowpath file is read-only and specifies how many
+		objects have been freed using the slow path (i.e. to a full or
+		partial slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/hwcache_align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The hwcache_align file is read-only and specifies whether
+		objects are aligned on cachelines.
+
+What:		/sys/kernel/slab/cache/min_partial
+Date:		February 2009
+KernelVersion:	2.6.30
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		David Rientjes <rientjes@google.com>
+Description:
+		The min_partial file specifies how many empty slabs shall
+		remain on a node's partial list to avoid the overhead of
+		allocating new slabs.  Such slabs may be reclaimed by utilizing
+		the shrink file.
+
+What:		/sys/kernel/slab/cache/object_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The object_size file is read-only and specifies the cache's
+		object size.
+
+What:		/sys/kernel/slab/cache/objects
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects file is read-only and displays how many objects are
+		active and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/objects_partial
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects_partial file is read-only and displays how many
+		objects are on partial slabs and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/objs_per_slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file objs_per_slab is read-only and specifies how many
+		objects may be allocated from a single slab of the order
+		specified in /sys/kernel/slab/cache/order.
+
+What:		/sys/kernel/slab/cache/order
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order file specifies the page order at which new slabs are
+		allocated.  It is writable and can be changed to increase the
+		number of objects per slab.  If a slab cannot be allocated
+		because of fragmentation, SLUB will retry with the minimum order
+		possible depending on its characteristics.
+
+What:		/sys/kernel/slab/cache/order_fallback
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file order_fallback is read-only and specifies how many
+		times an allocation of a new slab has not been possible at the
+		cache's order and instead fallen back to its minimum possible
+		order.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/partial
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The partial file is read-only and displays how long many
+		partial slabs there are and how long each node's list is.
+
+What:		/sys/kernel/slab/cache/poison
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The poison file specifies whether objects should be poisoned
+		when a new slab is allocated.
+
+What:		/sys/kernel/slab/cache/reclaim_account
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The reclaim_account file specifies whether the cache's objects
+		are reclaimable (and grouped by their mobility).
+
+What:		/sys/kernel/slab/cache/red_zone
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The red_zone file specifies whether the cache's objects are red
+		zoned.
+
+What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file remote_node_defrag_ratio specifies the percentage of
+		times SLUB will attempt to refill the cpu slab with a partial
+		slab from a remote node as opposed to allocating a new slab on
+		the local node.  This reduces the amount of wasted memory over
+		the entire system but can be expensive.
+		Available when CONFIG_NUMA is enabled.
+
+What:		/sys/kernel/slab/cache/sanity_checks
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The sanity_checks file specifies whether expensive checks
+		should be performed on free and, at minimum, enables double free
+		checks.  Caches that enable sanity_checks cannot be merged with
+		caches that do not.
+
+What:		/sys/kernel/slab/cache/shrink
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The shrink file is written when memory should be reclaimed from
+		a cache.  Empty partial slabs are freed and the partial list is
+		sorted so the slabs with the fewest available objects are used
+		first.
+
+What:		/sys/kernel/slab/cache/slab_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slab_size file is read-only and specifies the object size
+		with metadata (debugging information and alignment) in bytes.
+
+What:		/sys/kernel/slab/cache/slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slabs file is read-only and displays how long many slabs
+		there are (both cpu and partial) and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/store_user
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The store_user file specifies whether the location of
+		allocation or free should be tracked for a cache.
+
+What:		/sys/kernel/slab/cache/total_objects
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The total_objects file is read-only and displays how many total
+		objects a cache has and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/trace
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The trace file specifies whether object allocations and frees
+		should be traced.
+
+What:		/sys/kernel/slab/cache/validate
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		Writing to the validate file causes SLUB to traverse all of its
+		cache's objects and check the validity of metadata.
-- 
cgit v1.2.3


From fd9db7297749c05fcf5721ce5393a5a8b8772f2a Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 28 Apr 2009 16:56:35 +0200
Subject: fuse: destroy bdi on error

Destroy bdi on error in fuse_fill_super().

This was an omission from commit 26c3679101dbccc054dcf370143941844ba70531
"fuse: destroy bdi on umount", which moved the bdi_destroy() call from
fuse_conn_put() to fuse_put_super().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
---
 fs/fuse/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 459b73dd45e..75ca5ac603a 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -908,6 +908,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
  err_put_root:
 	dput(root_dentry);
  err_put_conn:
+	bdi_destroy(&fc->bdi);
 	fuse_conn_put(fc);
  err_fput:
 	fput(file);
-- 
cgit v1.2.3


From 6d3d4be40357e3ea43b5c8837dec01d8f6cd1c67 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 28 Apr 2009 16:42:39 +0200
Subject: CRIS: Wire up syscalls signalfd4 to writev.

Adds sys_signalfd4, sys_eventfd2, sys_epoll_create1, sys_dup3,
sys_pipe2, sys_inotify_init1, sys_preadv, sys_pwritev
for both CRISv10 and CRISv32.
---
 arch/cris/arch-v10/kernel/entry.S | 14 +++++++++++---
 arch/cris/arch-v32/kernel/entry.S |  8 ++++++++
 arch/cris/include/asm/unistd.h    | 12 ++++++++++--
 3 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index 72f5cd319b9..2c18d08cd91 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -536,10 +536,10 @@ multiple_interrupt:
 	movem	$r13, [$sp]
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
-	
+
 	move.d  $sp, $r10
 	jsr	do_multiple_IRQ
-	
+
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
 	pop	$r0			; Restore r0. 
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
-	
+
 	.global kernel_execve
 kernel_execve:
 	move.d __NR_execve, $r9
@@ -929,6 +929,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 5e674c8f7c5..435b9671bd4 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -852,6 +852,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime       /* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have
diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h
index 235d076379d..c17079388bb 100644
--- a/arch/cris/include/asm/unistd.h
+++ b/arch/cris/include/asm/unistd.h
@@ -281,7 +281,7 @@
 #define __NR_mbind		274
 #define __NR_get_mempolicy	275
 #define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
+#define __NR_mq_open		277
 #define __NR_mq_unlink		(__NR_mq_open+1)
 #define __NR_mq_timedsend	(__NR_mq_open+2)
 #define __NR_mq_timedreceive	(__NR_mq_open+3)
@@ -331,10 +331,18 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 327
+#define NR_syscalls 335
 
 #include <arch/unistd.h>
 
-- 
cgit v1.2.3


From 999fb23ef868719b8bd55ee3f6b1f7a8fd8016af Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Tue, 28 Apr 2009 19:08:10 +0200
Subject: CRISv32: Fix typo compile error in ARTPEC-3 gpio driver.

arch/cris/arch-v32/drivers/mach-a3/gpio.c:
+spin_lock_irqrestore(&gpio_lock, flags);
arch/cris/arch-v32/drivers/mach-a3/gpio.c:
+spin_lock_irqrestore(&gpio_lock, flags);

  should that not be "spin_unlock_irqrestore()"?

The code in question was inside an (most often) undefined ifdef.

Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/arch-v32/drivers/mach-a3/gpio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index 7a87bc0ae2e..97357cfd17b 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) |
 			(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRBITS:
 		spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) &
 			~(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		/* Set alarm when bits with 1 in arg go high. */
-- 
cgit v1.2.3


From 3f33b0aaac4e208579fe5aa2964857d4e9ba10c5 Mon Sep 17 00:00:00 2001
From: "Steven A. Falco" <sfalco@harris.com>
Date: Mon, 27 Apr 2009 17:10:10 -0400
Subject: mtd: Bug in m25p80.c during whole-chip erase

There is a logic error in "whole chip erase" for the m25p80 family.  If
the whole device is successfully erased, erase_chip() will return 0, and
the code will fall through to the "else" clause, and do sector-by-sector
erase in addition to the whole-chip erase.  This patch corrects that.

Also, the MAX_READY_WAIT_COUNT is insufficient for an m25p16 connected
to a 400 MHz powerpc.  Increasing it allows me to successfully program
the device on my board.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/m25p80.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 8185b1f3e5e..dfadef84c05 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
 #define	SR_SRWD			0x80	/* SR write protect */
 
 /* Define max times to check status register before we give up. */
-#define	MAX_READY_WAIT_COUNT	100000
+#define	MAX_READY_WAIT_COUNT	1000000
 #define	CMD_SIZE		4
 
 #ifdef CONFIG_M25PXX_USE_FAST_READ
@@ -246,10 +246,12 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 	mutex_lock(&flash->lock);
 
 	/* whole-chip erase? */
-	if (len == flash->mtd.size && erase_chip(flash)) {
-		instr->state = MTD_ERASE_FAILED;
-		mutex_unlock(&flash->lock);
-		return -EIO;
+	if (len == flash->mtd.size) {
+		if (erase_chip(flash)) {
+			instr->state = MTD_ERASE_FAILED;
+			mutex_unlock(&flash->lock);
+			return -EIO;
+		}
 
 	/* REVISIT in some cases we could speed up erasing large regions
 	 * by using OPCODE_SE instead of OPCODE_BE_4K.  We may have set up
-- 
cgit v1.2.3


From ec6995ddaa3db2c5f028184ed9b74c0c448c4947 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Wed, 29 Apr 2009 15:15:59 -0700
Subject: RDMA/cxgb3: Don't complete flushed send work requests twice

When the SQ is flushed, mark the flushed entries as not signaled so
the poll logic doesn't re-insert the CQ entry thinking its an out of
order completion.

The bug can cause the NFS/RDMA server to crash due to processing the
same completed work request twice.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/cxgb3/cxio_hal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 8d71086f5a1..62f9cf2f94e 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -410,6 +410,7 @@ int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
 	ptr = wq->sq_rptr + count;
 	sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
 	while (ptr != wq->sq_wptr) {
+		sqp->signaled = 0;
 		insert_sq_cqe(wq, cq, sqp);
 		ptr++;
 		sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
-- 
cgit v1.2.3


From d37dc42ab6f040b8f0f2962ab219c5b2accf748d Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:45:08 -0400
Subject: nls: add a nls_nullsize inline

It's possible for character sets to require a multi-byte null
string terminator. Add a helper function that determines the size
of the null terminator at runtime.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 include/linux/nls.h | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/include/linux/nls.h b/include/linux/nls.h
index 6a882208301..52b1a76c1b4 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -58,6 +58,25 @@ static inline int nls_strnicmp(struct nls_table *t, const unsigned char *s1,
 	return 0;
 }
 
+/*
+ * nls_nullsize - return length of null character for codepage
+ * @codepage - codepage for which to return length of NULL terminator
+ *
+ * Since we can't guarantee that the null terminator will be a particular
+ * length, we have to check against the codepage. If there's a problem
+ * determining it, assume a single-byte NULL terminator.
+ */
+static inline int
+nls_nullsize(const struct nls_table *codepage)
+{
+	int charlen;
+	char tmp[NLS_MAX_CHARSET_SIZE];
+
+	charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
+
+	return charlen > 0 ? charlen : 1;
+}
+
 #define MODULE_ALIAS_NLS(name)	MODULE_ALIAS("nls_" __stringify(name))
 
 #endif /* _LINUX_NLS_H */
-- 
cgit v1.2.3


From 66345f50f070ae7412a28543ee197cb5eff73598 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:45:08 -0400
Subject: cifs: move #defines for mapchars into cifs_unicode.h

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.h | 13 +++++++++++++
 fs/cifs/misc.c         | 11 -----------
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 14eb9a2395d..d6fe8ecd1ff 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -37,6 +37,19 @@
 
 #define  UNIUPR_NOLOWER		/* Example to not expand lower case tables */
 
+/*
+ * Windows maps these to the user defined 16 bit Unicode range since they are
+ * reserved symbols (along with \ and /), otherwise illegal to store
+ * in filenames in NTFS
+ */
+#define UNI_ASTERIK     (__u16) ('*' + 0xF000)
+#define UNI_QUESTION    (__u16) ('?' + 0xF000)
+#define UNI_COLON       (__u16) (':' + 0xF000)
+#define UNI_GRTRTHAN    (__u16) ('>' + 0xF000)
+#define UNI_LESSTHAN    (__u16) ('<' + 0xF000)
+#define UNI_PIPE        (__u16) ('|' + 0xF000)
+#define UNI_SLASH       (__u16) ('\\' + 0xF000)
+
 /* Just define what we want from uniupr.h.  We don't want to define the tables
  * in each source file.
  */
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 4c89c572891..bb81c8af6a9 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -635,17 +635,6 @@ dump_smb(struct smb_hdr *smb_buf, int smb_buf_length)
 	return;
 }
 
-/* Windows maps these to the user defined 16 bit Unicode range since they are
-   reserved symbols (along with \ and /), otherwise illegal to store
-   in filenames in NTFS */
-#define UNI_ASTERIK     (__u16) ('*' + 0xF000)
-#define UNI_QUESTION    (__u16) ('?' + 0xF000)
-#define UNI_COLON       (__u16) (':' + 0xF000)
-#define UNI_GRTRTHAN    (__u16) ('>' + 0xF000)
-#define UNI_LESSTHAN    (__u16) ('<' + 0xF000)
-#define UNI_PIPE        (__u16) ('|' + 0xF000)
-#define UNI_SLASH       (__u16) ('\\' + 0xF000)
-
 /* Convert 16 bit Unicode pathname from wire format to string in current code
    page.  Conversion may involve remapping up the seven characters that are
    only legal in POSIX-like OS (if they are present in the string). Path
-- 
cgit v1.2.3


From 7fabf0c9479fef9fdb9528a5fbdb1cb744a744a4 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:46:15 -0400
Subject: cifs: add replacement for cifs_strtoUCS_le called cifs_from_ucs2

Add a replacement function for cifs_strtoUCS_le. cifs_from_ucs2
takes args for the source and destination length so that we can ensure
that the function is confined within the intended buffers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 124 +++++++++++++++++++++++++++++++++++++++++++++++++
 fs/cifs/cifs_unicode.h |   2 +
 2 files changed, 126 insertions(+)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 7d75272a6b3..8389f359b03 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -25,6 +25,130 @@
 #include "cifsglob.h"
 #include "cifs_debug.h"
 
+/*
+ * cifs_mapchar - convert a little-endian char to proper char in codepage
+ * @target - where converted character should be copied
+ * @src_char - 2 byte little-endian source character
+ * @cp - codepage to which character should be converted
+ * @mapchar - should character be mapped according to mapchars mount option?
+ *
+ * This function handles the conversion of a single character. It is the
+ * responsibility of the caller to ensure that the target buffer is large
+ * enough to hold the result of the conversion (at least NLS_MAX_CHARSET_SIZE).
+ */
+static int
+cifs_mapchar(char *target, const __le16 src_char, const struct nls_table *cp,
+	     bool mapchar)
+{
+	int len = 1;
+
+	if (!mapchar)
+		goto cp_convert;
+
+	/*
+	 * BB: Cannot handle remapping UNI_SLASH until all the calls to
+	 *     build_path_from_dentry are modified, as they use slash as
+	 *     separator.
+	 */
+	switch (le16_to_cpu(src_char)) {
+	case UNI_COLON:
+		*target = ':';
+		break;
+	case UNI_ASTERIK:
+		*target = '*';
+		break;
+	case UNI_QUESTION:
+		*target = '?';
+		break;
+	case UNI_PIPE:
+		*target = '|';
+		break;
+	case UNI_GRTRTHAN:
+		*target = '>';
+		break;
+	case UNI_LESSTHAN:
+		*target = '<';
+		break;
+	default:
+		goto cp_convert;
+	}
+
+out:
+	return len;
+
+cp_convert:
+	len = cp->uni2char(le16_to_cpu(src_char), target,
+			   NLS_MAX_CHARSET_SIZE);
+	if (len <= 0) {
+		*target = '?';
+		len = 1;
+	}
+	goto out;
+}
+
+/*
+ * cifs_from_ucs2 - convert utf16le string to local charset
+ * @to - destination buffer
+ * @from - source buffer
+ * @tolen - destination buffer size (in bytes)
+ * @fromlen - source buffer size (in bytes)
+ * @codepage - codepage to which characters should be converted
+ * @mapchar - should characters be remapped according to the mapchars option?
+ *
+ * Convert a little-endian ucs2le string (as sent by the server) to a string
+ * in the provided codepage. The tolen and fromlen parameters are to ensure
+ * that the code doesn't walk off of the end of the buffer (which is always
+ * a danger if the alignment of the source buffer is off). The destination
+ * string is always properly null terminated and fits in the destination
+ * buffer. Returns the length of the destination string in bytes (including
+ * null terminator).
+ *
+ * Note that some windows versions actually send multiword UTF-16 characters
+ * instead of straight UCS-2. The linux nls routines however aren't able to
+ * deal with those characters properly. In the event that we get some of
+ * those characters, they won't be translated properly.
+ */
+int
+cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+		 const struct nls_table *codepage, bool mapchar)
+{
+	int i, charlen, safelen;
+	int outlen = 0;
+	int nullsize = nls_nullsize(codepage);
+	int fromwords = fromlen / 2;
+	char tmp[NLS_MAX_CHARSET_SIZE];
+
+	/*
+	 * because the chars can be of varying widths, we need to take care
+	 * not to overflow the destination buffer when we get close to the
+	 * end of it. Until we get to this offset, we don't need to check
+	 * for overflow however.
+	 */
+	safelen = tolen - (NLS_MAX_CHARSET_SIZE + nullsize);
+
+	for (i = 0; i < fromwords && from[i]; i++) {
+		/*
+		 * check to see if converting this character might make the
+		 * conversion bleed into the null terminator
+		 */
+		if (outlen >= safelen) {
+			charlen = cifs_mapchar(tmp, from[i], codepage, mapchar);
+			if ((outlen + charlen) > (tolen - nullsize))
+				break;
+		}
+
+		/* put converted char into 'to' buffer */
+		charlen = cifs_mapchar(&to[outlen], from[i], codepage, mapchar);
+		outlen += charlen;
+	}
+
+	/* properly null-terminate string */
+	for (i = 0; i < nullsize; i++)
+		to[outlen++] = 0;
+
+	return outlen;
+}
+
 /*
  * NAME:	cifs_strfromUCS()
  *
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index d6fe8ecd1ff..6aa6533e49f 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -72,6 +72,8 @@ extern struct UniCaseRange UniLowerRange[];
 #endif				/* UNIUPR_NOLOWER */
 
 #ifdef __KERNEL__
+int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+		   const struct nls_table *codepage, bool mapchar);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
 #endif
-- 
cgit v1.2.3


From 69f801fcaa03be83d58c564f00913b7c172808e4 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 06:46:32 -0400
Subject: cifs: add new function to get unicode string length in bytes

Working in units of words means we do a lot of unnecessary conversion back
and forth. Standardize on bytes instead since that's more useful for
allocating buffers and such. Also, remove hostlen_fromUCS since the new
function has a similar purpose.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 31 +++++++++++++++++++++++++++++++
 fs/cifs/cifs_unicode.h |  2 ++
 fs/cifs/cifssmb.c      | 25 ++-----------------------
 3 files changed, 35 insertions(+), 23 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 8389f359b03..614512573c6 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -25,6 +25,37 @@
 #include "cifsglob.h"
 #include "cifs_debug.h"
 
+/*
+ * cifs_ucs2_bytes - how long will a string be after conversion?
+ * @ucs - pointer to input string
+ * @maxbytes - don't go past this many bytes of input string
+ * @codepage - destination codepage
+ *
+ * Walk a ucs2le string and return the number of bytes that the string will
+ * be after being converted to the given charset, not including any null
+ * termination required. Don't walk past maxbytes in the source buffer.
+ */
+int
+cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+		const struct nls_table *codepage)
+{
+	int i;
+	int charlen, outlen = 0;
+	int maxwords = maxbytes / 2;
+	char tmp[NLS_MAX_CHARSET_SIZE];
+
+	for (i = 0; from[i] && i < maxwords; i++) {
+		charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
+					     NLS_MAX_CHARSET_SIZE);
+		if (charlen > 0)
+			outlen += charlen;
+		else
+			outlen++;
+	}
+
+	return outlen;
+}
+
 /*
  * cifs_mapchar - convert a little-endian char to proper char in codepage
  * @target - where converted character should be copied
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 6aa6533e49f..1857f5ff933 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -74,6 +74,8 @@ extern struct UniCaseRange UniLowerRange[];
 #ifdef __KERNEL__
 int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
 		   const struct nls_table *codepage, bool mapchar);
+int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+		    const struct nls_table *codepage);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
 #endif
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a02c43b3faf..cadacae46b8 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3928,27 +3928,6 @@ GetInodeNumOut:
 	return rc;
 }
 
-/* computes length of UCS string converted to host codepage
- * @src:	UCS string
- * @maxlen:	length of the input string in UCS characters
- * 		(not in bytes)
- *
- * return:	size of input string in host codepage
- */
-static int hostlen_fromUCS(const __le16 *src, const int maxlen,
-		const struct nls_table *nls_codepage) {
-	int i;
-	int hostlen = 0;
-	char to[4];
-	int charlen;
-	for (i = 0; (i < maxlen) && src[i]; ++i) {
-		charlen = nls_codepage->uni2char(le16_to_cpu(src[i]),
-				to, NLS_MAX_CHARSET_SIZE);
-		hostlen += charlen > 0 ? charlen : 1;
-	}
-	return hostlen;
-}
-
 /* parses DFS refferal V3 structure
  * caller is responsible for freeing target_nodes
  * returns:
@@ -4016,8 +3995,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 						GFP_KERNEL);
 			cifsConvertToUCS((__le16 *) tmp, searchName,
 					PATH_MAX, nls_codepage, remap);
-			node->path_consumed = hostlen_fromUCS(tmp,
-					le16_to_cpu(pSMBr->PathConsumed)/2,
+			node->path_consumed = cifs_ucs2_bytes(tmp,
+					le16_to_cpu(pSMBr->PathConsumed),
 					nls_codepage);
 			kfree(tmp);
 		} else
-- 
cgit v1.2.3


From 066ce6899484d9026acd6ba3a8dbbedb33d7ae1b Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:16:14 -0400
Subject: cifs: rename cifs_strlcpy_to_host and make it use new functions

Rename cifs_strlcpy_to_host to cifs_strndup since that better describes
what this function really does. Then, convert it to use the new string
conversion and measurement functions that work in units of bytes rather
than wide chars.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 38 ++++++++++++++++++++++++++++++++++
 fs/cifs/cifs_unicode.h |  2 ++
 fs/cifs/cifssmb.c      | 55 +++++++++++---------------------------------------
 3 files changed, 52 insertions(+), 43 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 614512573c6..2a879cff3a4 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -243,3 +243,41 @@ cifs_strtoUCS(__le16 *to, const char *from, int len,
 	return i;
 }
 
+/*
+ * cifs_strndup - copy a string from wire format to the local codepage
+ * @src - source string
+ * @maxlen - don't walk past this many bytes in the source string
+ * @is_unicode - is this a unicode string?
+ * @codepage - destination codepage
+ *
+ * Take a string given by the server, convert it to the local codepage and
+ * put it in a new buffer. Returns a pointer to the new string or NULL on
+ * error.
+ */
+char *
+cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
+	     const struct nls_table *codepage)
+{
+	int len;
+	char *dst;
+
+	if (is_unicode) {
+		len = cifs_ucs2_bytes((__le16 *) src, maxlen, codepage);
+		len += nls_nullsize(codepage);
+		dst = kmalloc(len, GFP_KERNEL);
+		if (!dst)
+			return NULL;
+		cifs_from_ucs2(dst, (__le16 *) src, len, maxlen, codepage,
+			       false);
+	} else {
+		len = strnlen(src, maxlen);
+		len++;
+		dst = kmalloc(len, GFP_KERNEL);
+		if (!dst)
+			return NULL;
+		strlcpy(dst, src, len);
+	}
+
+	return dst;
+}
+
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 1857f5ff933..e620f0b4220 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -78,6 +78,8 @@ int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
 		    const struct nls_table *codepage);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
+char *cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
+		   const struct nls_table *codepage);
 #endif
 
 /*
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index cadacae46b8..f15848374cf 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -81,41 +81,6 @@ static struct {
 #endif /* CONFIG_CIFS_WEAK_PW_HASH */
 #endif /* CIFS_POSIX */
 
-/* Allocates buffer into dst and copies smb string from src to it.
- * caller is responsible for freeing dst if function returned 0.
- * returns:
- * 	on success - 0
- *	on failure - errno
- */
-static int
-cifs_strlcpy_to_host(char **dst, const char *src, const int maxlen,
-		 const bool is_unicode, const struct nls_table *nls_codepage)
-{
-	int plen;
-
-	if (is_unicode) {
-		plen = UniStrnlen((wchar_t *)src, maxlen);
-		*dst = kmalloc((4 * plen) + 2, GFP_KERNEL);
-		if (!*dst)
-			goto cifs_strlcpy_to_host_ErrExit;
-		cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
-		(*dst)[plen] = 0;
-		(*dst)[plen+1] = 0; /* needed for Unicode */
-	} else {
-		plen = strnlen(src, maxlen);
-		*dst = kmalloc(plen + 2, GFP_KERNEL);
-		if (!*dst)
-			goto cifs_strlcpy_to_host_ErrExit;
-		strlcpy(*dst, src, plen);
-	}
-	return 0;
-
-cifs_strlcpy_to_host_ErrExit:
-	cERROR(1, ("Failed to allocate buffer for string\n"));
-	return -ENOMEM;
-}
-
-
 /* Mark as invalid, all open files on tree connections since they
    were closed when session to server was lost */
 static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
@@ -4008,20 +3973,24 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy DfsPath */
 		temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
 		max_len = data_end - temp;
-		rc = cifs_strlcpy_to_host(&(node->path_name), temp,
-					max_len, is_unicode, nls_codepage);
-		if (rc)
+		node->path_name = cifs_strndup(temp, max_len, is_unicode,
+					       nls_codepage);
+		if (IS_ERR(node->path_name)) {
+			rc = PTR_ERR(node->path_name);
+			node->path_name = NULL;
 			goto parse_DFS_referrals_exit;
+		}
 
 		/* copy link target UNC */
 		temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
 		max_len = data_end - temp;
-		rc = cifs_strlcpy_to_host(&(node->node_name), temp,
-					max_len, is_unicode, nls_codepage);
-		if (rc)
+		node->node_name = cifs_strndup(temp, max_len, is_unicode,
+					       nls_codepage);
+		if (IS_ERR(node->node_name)) {
+			rc = PTR_ERR(node->node_name);
+			node->node_name = NULL;
 			goto parse_DFS_referrals_exit;
-
-		ref += le16_to_cpu(ref->Size);
+		}
 	}
 
 parse_DFS_referrals_exit:
-- 
cgit v1.2.3


From cc20c031bb067eb3280a1c4b5c42295093e24863 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:16:21 -0400
Subject: cifs: convert CIFSTCon to use new unicode helper functions

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 49 ++++++++++++++-----------------------------------
 1 file changed, 14 insertions(+), 35 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index bacdef1546b..e94d6b29af6 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3638,7 +3638,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	TCONX_RSP *pSMBr;
 	unsigned char *bcc_ptr;
 	int rc = 0;
-	int length;
+	int length, bytes_left;
 	__u16 count;
 
 	if (ses == NULL)
@@ -3726,14 +3726,15 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
 			 CIFS_STD_OP);
 
-	/* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
 	/* above now done in SendReceive */
 	if ((rc == 0) && (tcon != NULL)) {
 		tcon->tidStatus = CifsGood;
 		tcon->need_reconnect = false;
 		tcon->tid = smb_buffer_response->Tid;
 		bcc_ptr = pByteArea(smb_buffer_response);
-		length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
+		bytes_left = BCC(smb_buffer_response);
+		length = strnlen(bcc_ptr, bytes_left - 2);
+
 		/* skip service field (NB: this field is always ASCII) */
 		if (length == 3) {
 			if ((bcc_ptr[0] == 'I') && (bcc_ptr[1] == 'P') &&
@@ -3748,39 +3749,17 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 			}
 		}
 		bcc_ptr += length + 1;
+		bytes_left -= (length + 1);
 		strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
-		if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-			length = UniStrnlen((wchar_t *) bcc_ptr, 512);
-			if ((bcc_ptr + (2 * length)) -
-			     pByteArea(smb_buffer_response) <=
-			    BCC(smb_buffer_response)) {
-				kfree(tcon->nativeFileSystem);
-				tcon->nativeFileSystem =
-				    kzalloc((4 * length) + 2, GFP_KERNEL);
-				if (tcon->nativeFileSystem) {
-					cifs_strfromUCS_le(
-						tcon->nativeFileSystem,
-						(__le16 *) bcc_ptr,
-						length, nls_codepage);
-					cFYI(1, ("nativeFileSystem=%s",
-						tcon->nativeFileSystem));
-				}
-			}
-			/* else do not bother copying these information fields*/
-		} else {
-			length = strnlen(bcc_ptr, 1024);
-			if ((bcc_ptr + length) -
-			    pByteArea(smb_buffer_response) <=
-			    BCC(smb_buffer_response)) {
-				kfree(tcon->nativeFileSystem);
-				tcon->nativeFileSystem =
-				    kzalloc(length + 1, GFP_KERNEL);
-				if (tcon->nativeFileSystem)
-					strncpy(tcon->nativeFileSystem, bcc_ptr,
-						length);
-			}
-			/* else do not bother copying these information fields*/
-		}
+
+		/* mostly informational -- no need to fail on error here */
+		tcon->nativeFileSystem = cifs_strndup(bcc_ptr, bytes_left,
+						      smb_buffer->Flags2 &
+							 SMBFLG2_UNICODE,
+						      nls_codepage);
+
+		cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
+
 		if ((smb_buffer_response->WordCount == 3) ||
 			 (smb_buffer_response->WordCount == 7))
 			/* field is in same location */
-- 
cgit v1.2.3


From 59140797c5817363087b0ffb46e6bb81a11fe0dc Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:16:21 -0400
Subject: cifs: fix session setup unicode string saving to use new unicode
 helpers

...and change decode_unicode_ssetup to be a void function. It never
returns an actual error anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 80 ++++++++++++++++------------------------------------------
 1 file changed, 22 insertions(+), 58 deletions(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index c652c73760d..93022dc9bab 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -277,12 +277,11 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses,
 	*pbcc_area = bcc_ptr;
 }
 
-static int decode_unicode_ssetup(char **pbcc_area, int bleft,
-				 struct cifsSesInfo *ses,
-				 const struct nls_table *nls_cp)
+static void
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
+		      const struct nls_table *nls_cp)
 {
-	int rc = 0;
-	int words_left, len;
+	int len;
 	char *data = *pbcc_area;
 
 	cFYI(1, ("bleft %d", bleft));
@@ -300,63 +299,29 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
 		++bleft;
 	}
 
-	words_left = bleft / 2;
-
-	/* save off server operating system */
-	len = UniStrnlen((wchar_t *) data, words_left);
-
-	if (len >= words_left)
-		return rc;
-
 	kfree(ses->serverOS);
-	/* UTF-8 string will not grow more than four times as big as UCS-16 */
-	ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
-	if (ses->serverOS != NULL) {
-		cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
-		cFYI(1, ("serverOS=%s", ses->serverOS));
-	}
-	data += 2 * (len + 1);
-	words_left -= len + 1;
-
-	/* save off server network operating system */
-	len = UniStrnlen((wchar_t *) data, words_left);
-
-	if (len >= words_left)
-		return rc;
+	ses->serverOS = cifs_strndup(data, bleft, true, nls_cp);
+	cFYI(1, ("serverOS=%s", ses->serverOS));
+	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+	data += len;
+	bleft -= len;
+	if (bleft <= 0)
+		return;
 
 	kfree(ses->serverNOS);
-	ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
-	if (ses->serverNOS != NULL) {
-		cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
-				   nls_cp);
-		cFYI(1, ("serverNOS=%s", ses->serverNOS));
-		if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
-			cFYI(1, ("NT4 server"));
-			ses->flags |= CIFS_SES_NT4;
-		}
-	}
-	data += 2 * (len + 1);
-	words_left -= len + 1;
-
-	/* save off server domain */
-	len = UniStrnlen((wchar_t *) data, words_left);
-
-	if (len > words_left)
-		return rc;
+	ses->serverNOS = cifs_strndup(data, bleft, true, nls_cp);
+	cFYI(1, ("serverNOS=%s", ses->serverNOS));
+	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+	data += len;
+	bleft -= len;
+	if (bleft <= 0)
+		return;
 
 	kfree(ses->serverDomain);
-	ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
-	if (ses->serverDomain != NULL) {
-		cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
-				   nls_cp);
-		cFYI(1, ("serverDomain=%s", ses->serverDomain));
-	}
-	data += 2 * (len + 1);
-	words_left -= len + 1;
+	ses->serverDomain = cifs_strndup(data, bleft, true, nls_cp);
+	cFYI(1, ("serverDomain=%s", ses->serverDomain));
 
-	cFYI(1, ("words left: %d", words_left));
-
-	return rc;
+	return;
 }
 
 static int decode_ascii_ssetup(char **pbcc_area, int bleft,
@@ -709,8 +674,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 			++bcc_ptr;
 			--bytes_remaining;
 		}
-		rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
-					   ses, nls_cp);
+		decode_unicode_ssetup(&bcc_ptr, bytes_remaining, ses, nls_cp);
 	} else {
 		rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
 					 ses, nls_cp);
-- 
cgit v1.2.3


From 460b96960d1946914e50316ffeefe7b41dddce91 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:17:56 -0400
Subject: cifs: change CIFSSMBUnixQuerySymLink to use new helpers

Change CIFSSMBUnixQuerySymLink to use the new unicode helper functions.
Also change the calling conventions so that the allocation of the target
name buffer is done in CIFSSMBUnixQuerySymLink rather than by the caller.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsproto.h |  3 +--
 fs/cifs/cifssmb.c   | 36 ++++++++++++++----------------------
 fs/cifs/link.c      | 22 +++++-----------------
 3 files changed, 20 insertions(+), 41 deletions(-)

diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 4167716d32f..7d54a5a4dd5 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -260,8 +260,7 @@ extern int CIFSUnixCreateSymLink(const int xid,
 			const struct nls_table *nls_codepage);
 extern int CIFSSMBUnixQuerySymLink(const int xid,
 			struct cifsTconInfo *tcon,
-			const unsigned char *searchName,
-			char *syminfo, const int buflen,
+			const unsigned char *searchName, char **syminfo,
 			const struct nls_table *nls_codepage);
 extern int CIFSSMBQueryReparseLinkInfo(const int xid,
 			struct cifsTconInfo *tcon,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index f15848374cf..dfb8e391d53 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2382,8 +2382,7 @@ winCreateHardLinkRetry:
 
 int
 CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
-			const unsigned char *searchName,
-			char *symlinkinfo, const int buflen,
+			const unsigned char *searchName, char **symlinkinfo,
 			const struct nls_table *nls_codepage)
 {
 /* SMB_QUERY_FILE_UNIX_LINK */
@@ -2393,6 +2392,7 @@ CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
 	int bytes_returned;
 	int name_len;
 	__u16 params, byte_count;
+	char *data_start;
 
 	cFYI(1, ("In QPathSymLinkInfo (Unix) for path %s", searchName));
 
@@ -2447,30 +2447,22 @@ querySymLinkRetry:
 		/* decode response */
 
 		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-		if (rc || (pSMBr->ByteCount < 2))
 		/* BB also check enough total bytes returned */
-			rc = -EIO;	/* bad smb */
+		if (rc || (pSMBr->ByteCount < 2))
+			rc = -EIO;
 		else {
-			__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
-			__u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+			u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+
+			data_start = ((char *) &pSMBr->hdr.Protocol) +
+					   le16_to_cpu(pSMBr->t2.DataOffset);
 
-			if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-				name_len = UniStrnlen((wchar_t *) ((char *)
-					&pSMBr->hdr.Protocol + data_offset),
-					min_t(const int, buflen, count) / 2);
 			/* BB FIXME investigate remapping reserved chars here */
-				cifs_strfromUCS_le(symlinkinfo,
-					(__le16 *) ((char *)&pSMBr->hdr.Protocol
-							+ data_offset),
-					name_len, nls_codepage);
-			} else {
-				strncpy(symlinkinfo,
-					(char *) &pSMBr->hdr.Protocol +
-						data_offset,
-					min_t(const int, buflen, count));
-			}
-			symlinkinfo[buflen] = 0;
-	/* just in case so calling code does not go off the end of buffer */
+			*symlinkinfo = cifs_strndup(data_start, count,
+						    pSMBr->hdr.Flags2 &
+							SMBFLG2_UNICODE,
+						    nls_codepage);
+			if (!symlinkinfo)
+				rc = -ENOMEM;
 		}
 	}
 	cifs_buf_release(pSMB);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 63f644000ce..e17a092f43e 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -119,16 +119,11 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 	full_path = build_path_from_dentry(direntry);
 
 	if (!full_path)
-		goto out_no_free;
+		goto out;
 
 	cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
-	target_path = kmalloc(PATH_MAX, GFP_KERNEL);
-	if (!target_path) {
-		target_path = ERR_PTR(-ENOMEM);
-		goto out;
-	}
 
 	/* We could change this to:
 		if (pTcon->unix_ext)
@@ -138,8 +133,7 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 
 	if (pTcon->ses->capabilities & CAP_UNIX)
 		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-					     target_path,
-					     PATH_MAX-1,
+					     &target_path,
 					     cifs_sb->local_nls);
 	else {
 		/* BB add read reparse point symlink code here */
@@ -148,22 +142,16 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 		/* BB Add MAC style xsymlink check here if enabled */
 	}
 
-	if (rc == 0) {
-
-/* BB Add special case check for Samba DFS symlinks */
-
-		target_path[PATH_MAX-1] = 0;
-	} else {
+	if (rc != 0) {
 		kfree(target_path);
 		target_path = ERR_PTR(rc);
 	}
 
-out:
 	kfree(full_path);
-out_no_free:
+out:
 	FreeXid(xid);
 	nd_set_link(nd, target_path);
-	return NULL;	/* No cookie */
+	return NULL;
 }
 
 int
-- 
cgit v1.2.3


From f58841666bc22e827ca0dcef7b71c7bc2758ce82 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 07:18:00 -0400
Subject: cifs: change cifs_get_name_from_search_buf to use new unicode helper

...and remove cifs_convertUCSpath. There are no more callers. Also add a
#define for the buffer used in the readdir path so that we don't have so
many magic numbers floating around.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsproto.h |  2 --
 fs/cifs/misc.c      | 60 -----------------------------------------------------
 fs/cifs/readdir.c   | 26 +++++++++++------------
 3 files changed, 13 insertions(+), 75 deletions(-)

diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 7d54a5a4dd5..fae083930ee 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -306,8 +306,6 @@ extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon,
 			const unsigned char *searchName, __u64 *inode_number,
 			const struct nls_table *nls_codepage,
 			int remap_special_chars);
-extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
-			const struct nls_table *codepage);
 extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
 			const struct nls_table *cp, int mapChars);
 
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index bb81c8af6a9..e079a9190ec 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -635,66 +635,6 @@ dump_smb(struct smb_hdr *smb_buf, int smb_buf_length)
 	return;
 }
 
-/* Convert 16 bit Unicode pathname from wire format to string in current code
-   page.  Conversion may involve remapping up the seven characters that are
-   only legal in POSIX-like OS (if they are present in the string). Path
-   names are little endian 16 bit Unicode on the wire */
-int
-cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
-		    const struct nls_table *cp)
-{
-	int i, j, len;
-	__u16 src_char;
-
-	for (i = 0, j = 0; i < maxlen; i++) {
-		src_char = le16_to_cpu(source[i]);
-		switch (src_char) {
-			case 0:
-				goto cUCS_out; /* BB check this BB */
-			case UNI_COLON:
-				target[j] = ':';
-				break;
-			case UNI_ASTERIK:
-				target[j] = '*';
-				break;
-			case UNI_QUESTION:
-				target[j] = '?';
-				break;
-			/* BB We can not handle remapping slash until
-			   all the calls to build_path_from_dentry
-			   are modified, as they use slash as separator BB */
-			/* case UNI_SLASH:
-				target[j] = '\\';
-				break;*/
-			case UNI_PIPE:
-				target[j] = '|';
-				break;
-			case UNI_GRTRTHAN:
-				target[j] = '>';
-				break;
-			case UNI_LESSTHAN:
-				target[j] = '<';
-				break;
-			default:
-				len = cp->uni2char(src_char, &target[j],
-						NLS_MAX_CHARSET_SIZE);
-				if (len > 0) {
-					j += len;
-					continue;
-				} else {
-					target[j] = '?';
-				}
-		}
-		j++;
-		/* make sure we do not overrun callers allocated temp buffer */
-		if (j >= (2 * NAME_MAX))
-			break;
-	}
-cUCS_out:
-	target[j] = 0;
-	return j;
-}
-
 /* Convert 16 bit Unicode pathname to wire format from string in current code
    page.  Conversion may involve remapping up the seven characters that are
    only legal in POSIX-like OS (if they are present in the string). Path
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index ebd0da7ecb3..e1351fe18a1 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -31,6 +31,13 @@
 #include "cifs_fs_sb.h"
 #include "cifsfs.h"
 
+/*
+ * To be safe - for UCS to UTF-8 with strings loaded with the rare long
+ * characters alloc more to account for such multibyte target UTF-8
+ * characters.
+ */
+#define UNICODE_NAME_MAX ((4 * NAME_MAX) + 2)
+
 #ifdef CONFIG_CIFS_DEBUG2
 static void dump_cifs_file_struct(struct file *file, char *label)
 {
@@ -881,14 +888,11 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	}
 
 	if (unicode) {
-		/* BB fixme - test with long names */
-		/* Note converted filename can be longer than in unicode */
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
-			pqst->len = cifs_convertUCSpath((char *)pqst->name,
-					(__le16 *)filename, len/2, nlt);
-		else
-			pqst->len = cifs_strfromUCS_le((char *)pqst->name,
-					(__le16 *)filename, len/2, nlt);
+		pqst->len = cifs_from_ucs2((char *) pqst->name,
+					   (__le16 *) filename,
+					   UNICODE_NAME_MAX, max_len, nlt,
+					   cifs_sb->mnt_cifs_flags &
+						CIFS_MOUNT_MAP_SPECIAL_CHR);
 	} else {
 		pqst->name = filename;
 		pqst->len = len;
@@ -1070,11 +1074,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 				cifsFile->srch_inf.ntwrk_buf_start);
 		end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
 
-		/* To be safe - for UCS to UTF-8 with strings loaded
-		with the rare long characters alloc more to account for
-		such multibyte target UTF-8 characters. cifs_unicode.c,
-		which actually does the conversion, has the same limit */
-		tmp_buf = kmalloc((4 * NAME_MAX) + 2, GFP_KERNEL);
+		tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
 		for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
 			if (current_entry == NULL) {
 				/* evaluate whether this case is an error */
-- 
cgit v1.2.3


From 20418acd6874792359b42c12d159f42f17593f34 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 30 Apr 2009 16:13:32 +0000
Subject: [CIFS] Remove older session setup implementation

Two years ago, when the session setup code in cifs was rewritten and moved
to fs/cifs/sess.c, we were asked to keep the old code for a release or so
(which could be reenabled at runtime) since it was such a large change and
because the asn (SPNEGO) and NTLMSSP code was not rewritten and needed to
be. This was useful to avoid regressions, but is long overdue to be removed.
Now that the Kerberos (asn/spnego) code is working in fs/cifs/sess.c,
and the NTLMSSP code moved (NTLMSSP blob setup be rewritten with the
next patch in this series) quite a bit of dead code from fs/cifs/connect.c
now can be removed.

This old code should have been removed last year, but the earlier krb5
patches did not move/remove the NTLMSSP code which we had asked to
be done first.  Since no one else volunteered, I am doing it now.

It is extremely important that we continue to examine the documentation
for this area, to make sure our code continues to be uptodate with
changes since Windows 2003.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 381 +-----------------------------------------------------
 1 file changed, 7 insertions(+), 374 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index e94d6b29af6..579a628d1e6 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2592,310 +2592,6 @@ out:
 	return rc;
 }
 
-static int
-CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
-	      char session_key[CIFS_SESS_KEY_SIZE],
-	      const struct nls_table *nls_codepage)
-{
-	struct smb_hdr *smb_buffer;
-	struct smb_hdr *smb_buffer_response;
-	SESSION_SETUP_ANDX *pSMB;
-	SESSION_SETUP_ANDX *pSMBr;
-	char *bcc_ptr;
-	char *user;
-	char *domain;
-	int rc = 0;
-	int remaining_words = 0;
-	int bytes_returned = 0;
-	int len;
-	__u32 capabilities;
-	__u16 count;
-
-	cFYI(1, ("In sesssetup"));
-	if (ses == NULL)
-		return -EINVAL;
-	user = ses->userName;
-	domain = ses->domainName;
-	smb_buffer = cifs_buf_get();
-
-	if (smb_buffer == NULL)
-		return -ENOMEM;
-
-	smb_buffer_response = smb_buffer;
-	pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-
-	/* send SMBsessionSetup here */
-	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-			NULL /* no tCon exists yet */ , 13 /* wct */ );
-
-	smb_buffer->Mid = GetNextMid(ses->server);
-	pSMB->req_no_secext.AndXCommand = 0xFF;
-	pSMB->req_no_secext.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-	pSMB->req_no_secext.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
-	if (ses->server->secMode &
-			(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
-	capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-		CAP_LARGE_WRITE_X | CAP_LARGE_READ_X;
-	if (ses->capabilities & CAP_UNICODE) {
-		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-		capabilities |= CAP_UNICODE;
-	}
-	if (ses->capabilities & CAP_STATUS32) {
-		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-		capabilities |= CAP_STATUS32;
-	}
-	if (ses->capabilities & CAP_DFS) {
-		smb_buffer->Flags2 |= SMBFLG2_DFS;
-		capabilities |= CAP_DFS;
-	}
-	pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
-
-	pSMB->req_no_secext.CaseInsensitivePasswordLength =
-		cpu_to_le16(CIFS_SESS_KEY_SIZE);
-
-	pSMB->req_no_secext.CaseSensitivePasswordLength =
-	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
-	bcc_ptr = pByteArea(smb_buffer);
-	memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
-	bcc_ptr += CIFS_SESS_KEY_SIZE;
-	memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
-	bcc_ptr += CIFS_SESS_KEY_SIZE;
-
-	if (ses->capabilities & CAP_UNICODE) {
-		if ((long) bcc_ptr % 2) { /* must be word aligned for Unicode */
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-		if (user == NULL)
-			bytes_returned = 0; /* skip null user */
-		else
-			bytes_returned =
-				cifs_strtoUCS((__le16 *) bcc_ptr, user, 100,
-					nls_codepage);
-		/* convert number of 16 bit words to bytes */
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;	/* trailing null */
-		if (domain == NULL)
-			bytes_returned =
-			    cifs_strtoUCS((__le16 *) bcc_ptr,
-					  "CIFS_LINUX_DOM", 32, nls_codepage);
-		else
-			bytes_returned =
-			    cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
-					  nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release,
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
-				  64, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;
-	} else {
-		if (user != NULL) {
-		    strncpy(bcc_ptr, user, 200);
-		    bcc_ptr += strnlen(user, 200);
-		}
-		*bcc_ptr = 0;
-		bcc_ptr++;
-		if (domain == NULL) {
-			strcpy(bcc_ptr, "CIFS_LINUX_DOM");
-			bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
-		} else {
-			strncpy(bcc_ptr, domain, 64);
-			bcc_ptr += strnlen(domain, 64);
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-		strcpy(bcc_ptr, "Linux version ");
-		bcc_ptr += strlen("Linux version ");
-		strcpy(bcc_ptr, utsname()->release);
-		bcc_ptr += strlen(utsname()->release) + 1;
-		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-	}
-	count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-	smb_buffer->smb_buf_length += count;
-	pSMB->req_no_secext.ByteCount = cpu_to_le16(count);
-
-	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-			 &bytes_returned, CIFS_LONG_OP);
-	if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
-	} else if ((smb_buffer_response->WordCount == 3)
-		   || (smb_buffer_response->WordCount == 4)) {
-		__u16 action = le16_to_cpu(pSMBr->resp.Action);
-		__u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-		if (action & GUEST_LOGIN)
-			cFYI(1, ("Guest login")); /* BB mark SesInfo struct? */
-		ses->Suid = smb_buffer_response->Uid; /* UID left in wire format
-							 (little endian) */
-		cFYI(1, ("UID = %d ", ses->Suid));
-	/* response can have either 3 or 4 word count - Samba sends 3 */
-		bcc_ptr = pByteArea(smb_buffer_response);
-		if ((pSMBr->resp.hdr.WordCount == 3)
-		    || ((pSMBr->resp.hdr.WordCount == 4)
-			&& (blob_len < pSMBr->resp.ByteCount))) {
-			if (pSMBr->resp.hdr.WordCount == 4)
-				bcc_ptr += blob_len;
-
-			if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-				if ((long) (bcc_ptr) % 2) {
-					remaining_words =
-					    (BCC(smb_buffer_response) - 1) / 2;
-					/* Unicode strings must be word
-					   aligned */
-					bcc_ptr++;
-				} else {
-					remaining_words =
-						BCC(smb_buffer_response) / 2;
-				}
-				len =
-				    UniStrnlen((wchar_t *) bcc_ptr,
-					       remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
-   the end since (at least) WIN2K and Windows XP have a major bug in not null
-   terminating last Unicode string in response  */
-				kfree(ses->serverOS);
-				ses->serverOS = kzalloc(2 * (len + 1),
-							GFP_KERNEL);
-				if (ses->serverOS == NULL)
-					goto sesssetup_nomem;
-				cifs_strfromUCS_le(ses->serverOS,
-						   (__le16 *)bcc_ptr,
-						   len, nls_codepage);
-				bcc_ptr += 2 * (len + 1);
-				remaining_words -= len + 1;
-				ses->serverOS[2 * len] = 0;
-				ses->serverOS[1 + (2 * len)] = 0;
-				if (remaining_words > 0) {
-					len = UniStrnlen((wchar_t *)bcc_ptr,
-							 remaining_words-1);
-					kfree(ses->serverNOS);
-					ses->serverNOS = kzalloc(2 * (len + 1),
-								 GFP_KERNEL);
-					if (ses->serverNOS == NULL)
-						goto sesssetup_nomem;
-					cifs_strfromUCS_le(ses->serverNOS,
-							   (__le16 *)bcc_ptr,
-							   len, nls_codepage);
-					bcc_ptr += 2 * (len + 1);
-					ses->serverNOS[2 * len] = 0;
-					ses->serverNOS[1 + (2 * len)] = 0;
-					if (strncmp(ses->serverNOS,
-						"NT LAN Manager 4", 16) == 0) {
-						cFYI(1, ("NT4 server"));
-						ses->flags |= CIFS_SES_NT4;
-					}
-					remaining_words -= len + 1;
-					if (remaining_words > 0) {
-						len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
-				/* last string is not always null terminated
-				   (for e.g. for Windows XP & 2000) */
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-						    kzalloc(2*(len+1),
-							    GFP_KERNEL);
-						if (ses->serverDomain == NULL)
-							goto sesssetup_nomem;
-						cifs_strfromUCS_le(ses->serverDomain,
-							(__le16 *)bcc_ptr,
-							len, nls_codepage);
-						bcc_ptr += 2 * (len + 1);
-						ses->serverDomain[2*len] = 0;
-						ses->serverDomain[1+(2*len)] = 0;
-					} else { /* else no more room so create
-						  dummy domain string */
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-							kzalloc(2, GFP_KERNEL);
-					}
-				} else { /* no room so create dummy domain
-					    and NOS string */
-
-					/* if these kcallocs fail not much we
-					   can do, but better to not fail the
-					   sesssetup itself */
-					kfree(ses->serverDomain);
-					ses->serverDomain =
-					    kzalloc(2, GFP_KERNEL);
-					kfree(ses->serverNOS);
-					ses->serverNOS =
-					    kzalloc(2, GFP_KERNEL);
-				}
-			} else {	/* ASCII */
-				len = strnlen(bcc_ptr, 1024);
-				if (((long) bcc_ptr + len) - (long)
-				    pByteArea(smb_buffer_response)
-					    <= BCC(smb_buffer_response)) {
-					kfree(ses->serverOS);
-					ses->serverOS = kzalloc(len + 1,
-								GFP_KERNEL);
-					if (ses->serverOS == NULL)
-						goto sesssetup_nomem;
-					strncpy(ses->serverOS, bcc_ptr, len);
-
-					bcc_ptr += len;
-					/* null terminate the string */
-					bcc_ptr[0] = 0;
-					bcc_ptr++;
-
-					len = strnlen(bcc_ptr, 1024);
-					kfree(ses->serverNOS);
-					ses->serverNOS = kzalloc(len + 1,
-								 GFP_KERNEL);
-					if (ses->serverNOS == NULL)
-						goto sesssetup_nomem;
-					strncpy(ses->serverNOS, bcc_ptr, len);
-					bcc_ptr += len;
-					bcc_ptr[0] = 0;
-					bcc_ptr++;
-
-					len = strnlen(bcc_ptr, 1024);
-					kfree(ses->serverDomain);
-					ses->serverDomain = kzalloc(len + 1,
-								    GFP_KERNEL);
-					if (ses->serverDomain == NULL)
-						goto sesssetup_nomem;
-					strncpy(ses->serverDomain, bcc_ptr,
-						len);
-					bcc_ptr += len;
-					bcc_ptr[0] = 0;
-					bcc_ptr++;
-				} else
-					cFYI(1,
-					     ("Variable field of length %d "
-						"extends beyond end of smb ",
-					      len));
-			}
-		} else {
-			cERROR(1, ("Security Blob Length extends beyond "
-				"end of SMB"));
-		}
-	} else {
-		cERROR(1, ("Invalid Word count %d: ",
-			smb_buffer_response->WordCount));
-		rc = -EIO;
-	}
-sesssetup_nomem:	/* do not return an error on nomem for the info strings,
-			   since that could make reconnection harder, and
-			   reconnection might be needed to free memory */
-	cifs_buf_release(smb_buffer);
-
-	return rc;
-}
-
 static int
 CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 			      struct cifsSesInfo *ses, bool *pNTLMv2_flag,
@@ -3229,6 +2925,7 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 
 	return rc;
 }
+
 static int
 CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			char *ntlm_session_key, bool ntlmv2_flag,
@@ -3831,83 +3528,19 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 	pSesInfo->capabilities = server->capabilities;
 	if (linuxExtEnabled == 0)
 		pSesInfo->capabilities &= (~CAP_UNIX);
-	/*	pSesInfo->sequence_number = 0;*/
+
 	cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
 		 server->secMode, server->capabilities, server->timeAdj));
 
-	if (experimEnabled < 2)
-		rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
-	else if (extended_security
-			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			&& (server->secType == NTLMSSP)) {
-		rc = -EOPNOTSUPP;
-	} else if (extended_security
-			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			&& (server->secType == RawNTLMSSP)) {
-		cFYI(1, ("NTLMSSP sesssetup"));
-		rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
-						   nls_info);
-		if (!rc) {
-			if (ntlmv2_flag) {
-				char *v2_response;
-				cFYI(1, ("more secure NTLM ver2 hash"));
-				if (CalcNTLMv2_partial_mac_key(pSesInfo,
-								nls_info)) {
-					rc = -ENOMEM;
-					goto ss_err_exit;
-				} else
-					v2_response = kmalloc(16 + 64 /* blob*/,
-								GFP_KERNEL);
-				if (v2_response) {
-					CalcNTLMv2_response(pSesInfo,
-								v2_response);
-				/*	if (first_time)
-						cifs_calculate_ntlmv2_mac_key */
-					kfree(v2_response);
-					/* BB Put dummy sig in SessSetup PDU? */
-				} else {
-					rc = -ENOMEM;
-					goto ss_err_exit;
-				}
-
-			} else {
-				SMBNTencrypt(pSesInfo->password,
-					     server->cryptKey,
-					     ntlm_session_key);
-
-				if (first_time)
-					cifs_calculate_mac_key(
-					     &server->mac_signing_key,
-					     ntlm_session_key,
-					     pSesInfo->password);
-			}
-			/* for better security the weaker lanman hash not sent
-			   in AuthSessSetup so we no longer calculate it */
-
-			rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
-						      ntlm_session_key,
-						      ntlmv2_flag,
-						      nls_info);
-		}
-	} else { /* old style NTLM 0.12 session setup */
-		SMBNTencrypt(pSesInfo->password, server->cryptKey,
-			     ntlm_session_key);
-
-		if (first_time)
-			cifs_calculate_mac_key(&server->mac_signing_key,
-						ntlm_session_key,
-						pSesInfo->password);
-
-		rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
-	}
+	rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
 	if (rc) {
 		cERROR(1, ("Send error in SessSetup = %d", rc));
 	} else {
 		cFYI(1, ("CIFS Session Established successfully"));
-			spin_lock(&GlobalMid_Lock);
-			pSesInfo->status = CifsGood;
-			pSesInfo->need_reconnect = false;
-			spin_unlock(&GlobalMid_Lock);
+		spin_lock(&GlobalMid_Lock);
+		pSesInfo->status = CifsGood;
+		pSesInfo->need_reconnect = false;
+		spin_unlock(&GlobalMid_Lock);
 	}
 
 ss_err_exit:
-- 
cgit v1.2.3


From 1af28ceb923d04357733642a3dbc4497da4db1c2 Mon Sep 17 00:00:00 2001
From: Igor Mammedov <niallain@gmail.com>
Date: Tue, 17 Mar 2009 19:00:30 +0300
Subject: Enable dfs submounts to handle remote referrals.

Having remote dfs root support in cifs_mount, we can
afford to pass into it UNC that is remote.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_dfs_ref.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 5fdbf8a1447..896b08fb1ec 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -341,27 +341,23 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
 
 	for (i = 0; i < num_referrals; i++) {
 		dump_referral(referrals+i);
-		/* connect to a storage node */
-		if (referrals[i].flags & DFSREF_STORAGE_SERVER) {
-			int len;
-			len = strlen(referrals[i].node_name);
-			if (len < 2) {
-				cERROR(1, ("%s: Net Address path too short: %s",
+		/* connect to a node */
+		int len;
+		len = strlen(referrals[i].node_name);
+		if (len < 2) {
+			cERROR(1, ("%s: Net Address path too short: %s",
 					__func__, referrals[i].node_name));
-				rc = -EINVAL;
-				goto out_err;
-			}
-			mnt = cifs_dfs_do_refmount(nd->path.mnt,
-						nd->path.dentry,
-						referrals + i);
-			cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
-					 __func__,
+			rc = -EINVAL;
+			goto out_err;
+		}
+		mnt = cifs_dfs_do_refmount(nd->path.mnt,
+				nd->path.dentry, referrals + i);
+		cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
 					referrals[i].node_name, mnt));
 
-			/* complete mount procedure if we accured submount */
-			if (!IS_ERR(mnt))
-				break;
-		}
+		/* complete mount procedure if we accured submount */
+		if (!IS_ERR(mnt))
+			break;
 	}
 
 	/* we need it cause for() above could exit without valid submount */
-- 
cgit v1.2.3


From 5c2503a8e339fbc82f49d5706c5a4ad650dd9711 Mon Sep 17 00:00:00 2001
From: Igor Mammedov <niallain@gmail.com>
Date: Tue, 21 Apr 2009 19:31:05 +0400
Subject: Added loop check when mounting DFS tree.

Added loop check when mounting DFS tree. mount will fail with
ELOOP if referral walks exceed MAX_NESTED_LINK count.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 579a628d1e6..7e5d4fda493 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -32,6 +32,7 @@
 #include <linux/kthread.h>
 #include <linux/pagevec.h>
 #include <linux/freezer.h>
+#include <linux/namei.h>
 #include <asm/uaccess.h>
 #include <asm/processor.h>
 #include <net/ipv6.h>
@@ -2278,6 +2279,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	struct dfs_info3_param *referrals = NULL;
 	unsigned int num_referrals = 0;
+	int referral_walks_count = 0;
 try_mount_again:
 #endif
 	full_path = NULL;
@@ -2525,6 +2527,16 @@ remote_path_check:
 	/* get referral if needed */
 	if (rc == -EREMOTE) {
 #ifdef CONFIG_CIFS_DFS_UPCALL
+		if (referral_walks_count > MAX_NESTED_LINKS) {
+			/*
+			 * BB: when we implement proper loop detection,
+			 *     we will remove this check. But now we need it
+			 *     to prevent an indefinite loop if 'DFS tree' is
+			 *     misconfigured (i.e. has loops).
+			 */
+			rc = -ELOOP;
+			goto mount_fail_check;
+		}
 		/* convert forward to back slashes in prepath here if needed */
 		if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
 			convert_delimiter(cifs_sb->prepath,
@@ -2558,6 +2570,7 @@ remote_path_check:
 			cleanup_volume_info(&volume_info);
 			FreeXid(xid);
 			kfree(full_path);
+			referral_walks_count++;
 			goto try_mount_again;
 		}
 #else /* No DFS support, return error on mount */
-- 
cgit v1.2.3


From d185cda7712fd1d9e349174639d76eadc66679be Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 30 Apr 2009 17:45:10 +0000
Subject: [CIFS] rename cifs_strndup to cifs_strndup_from_ucs

In most cases, cifs_strndup is converting from Unicode (UCS2 / UTF-32) to
the configured local code page for the Linux mount (usually UTF8), so
Jeff suggested that to make it more clear that cifs_strndup is doing
a conversion not just memory allocation and copy, rename the function
to including "from_ucs" (ie Unicode)

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES        |  6 +++++-
 fs/cifs/cifs_unicode.c |  6 +++---
 fs/cifs/cifs_unicode.h |  7 ++++---
 fs/cifs/cifssmb.c      | 12 ++++++------
 fs/cifs/connect.c      |  5 +++--
 fs/cifs/sess.c         |  8 ++++----
 6 files changed, 25 insertions(+), 19 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1bf81813627..1b0643c2eac 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -2,7 +2,11 @@ Version 1.58
 ------------
 Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
 when the UTF-8 string is composed of unusually long (more than 4 byte) converted
-characters.
+characters. Add support for mounting root of a share which redirects immediately
+to DFS target. Convert string conversion functions from Unicode to more
+accurately mark string length before allocating memory (which may help the
+rare cases where a UTF-8 string is much larger than the UCS2 string that
+we converted from).
  
 Version 1.57
 ------------
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 2a879cff3a4..6382720acf7 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -1,7 +1,7 @@
 /*
  *   fs/cifs/cifs_unicode.c
  *
- *   Copyright (c) International Business Machines  Corp., 2000,2005
+ *   Copyright (c) International Business Machines  Corp., 2000,2009
  *   Modified by Steve French (sfrench@us.ibm.com)
  *
  *   This program is free software;  you can redistribute it and/or modify
@@ -244,7 +244,7 @@ cifs_strtoUCS(__le16 *to, const char *from, int len,
 }
 
 /*
- * cifs_strndup - copy a string from wire format to the local codepage
+ * cifs_strndup_from_ucs - copy a string from wire format to the local codepage
  * @src - source string
  * @maxlen - don't walk past this many bytes in the source string
  * @is_unicode - is this a unicode string?
@@ -255,7 +255,7 @@ cifs_strtoUCS(__le16 *to, const char *from, int len,
  * error.
  */
 char *
-cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
+cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
 	     const struct nls_table *codepage)
 {
 	int len;
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index e620f0b4220..1570a701bf3 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -5,7 +5,7 @@
  *     Convert a unicode character to upper or lower case using
  *     compressed tables.
  *
- *   Copyright (c) International Business Machines  Corp., 2000,2007
+ *   Copyright (c) International Business Machines  Corp., 2000,2009
  *
  *   This program is free software;  you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -78,8 +78,9 @@ int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
 		    const struct nls_table *codepage);
 int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
-char *cifs_strndup(const char *src, const int maxlen, const bool is_unicode,
-		   const struct nls_table *codepage);
+char *cifs_strndup_from_ucs(const char *src, const int maxlen,
+			    const bool is_unicode,
+			    const struct nls_table *codepage);
 #endif
 
 /*
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index dfb8e391d53..df5276e628b 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1,7 +1,7 @@
 /*
  *   fs/cifs/cifssmb.c
  *
- *   Copyright (C) International Business Machines  Corp., 2002,2008
+ *   Copyright (C) International Business Machines  Corp., 2002,2009
  *   Author(s): Steve French (sfrench@us.ibm.com)
  *
  *   Contains the routines for constructing the SMB PDUs themselves
@@ -2457,7 +2457,7 @@ querySymLinkRetry:
 					   le16_to_cpu(pSMBr->t2.DataOffset);
 
 			/* BB FIXME investigate remapping reserved chars here */
-			*symlinkinfo = cifs_strndup(data_start, count,
+			*symlinkinfo = cifs_strndup_from_ucs(data_start, count,
 						    pSMBr->hdr.Flags2 &
 							SMBFLG2_UNICODE,
 						    nls_codepage);
@@ -3965,8 +3965,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy DfsPath */
 		temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
 		max_len = data_end - temp;
-		node->path_name = cifs_strndup(temp, max_len, is_unicode,
-					       nls_codepage);
+		node->path_name = cifs_strndup_from_ucs(temp, max_len,
+						      is_unicode, nls_codepage);
 		if (IS_ERR(node->path_name)) {
 			rc = PTR_ERR(node->path_name);
 			node->path_name = NULL;
@@ -3976,8 +3976,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		/* copy link target UNC */
 		temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
 		max_len = data_end - temp;
-		node->node_name = cifs_strndup(temp, max_len, is_unicode,
-					       nls_codepage);
+		node->node_name = cifs_strndup_from_ucs(temp, max_len,
+						      is_unicode, nls_codepage);
 		if (IS_ERR(node->node_name)) {
 			rc = PTR_ERR(node->node_name);
 			node->node_name = NULL;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 7e5d4fda493..39f5362e2cb 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1,7 +1,7 @@
 /*
  *   fs/cifs/connect.c
  *
- *   Copyright (C) International Business Machines  Corp., 2002,2008
+ *   Copyright (C) International Business Machines  Corp., 2002,2009
  *   Author(s): Steve French (sfrench@us.ibm.com)
  *
  *   This library is free software; you can redistribute it and/or modify
@@ -3463,7 +3463,8 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 		strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
 
 		/* mostly informational -- no need to fail on error here */
-		tcon->nativeFileSystem = cifs_strndup(bcc_ptr, bytes_left,
+		tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
+						      bytes_left,
 						      smb_buffer->Flags2 &
 							 SMBFLG2_UNICODE,
 						      nls_codepage);
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 93022dc9bab..2bcff17047a 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -3,7 +3,7 @@
  *
  *   SMB/CIFS session setup handling routines
  *
- *   Copyright (c) International Business Machines  Corp., 2006, 2007
+ *   Copyright (c) International Business Machines  Corp., 2006, 2009
  *   Author(s): Steve French (sfrench@us.ibm.com)
  *
  *   This library is free software; you can redistribute it and/or modify
@@ -300,7 +300,7 @@ decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
 	}
 
 	kfree(ses->serverOS);
-	ses->serverOS = cifs_strndup(data, bleft, true, nls_cp);
+	ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
 	cFYI(1, ("serverOS=%s", ses->serverOS));
 	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
 	data += len;
@@ -309,7 +309,7 @@ decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
 		return;
 
 	kfree(ses->serverNOS);
-	ses->serverNOS = cifs_strndup(data, bleft, true, nls_cp);
+	ses->serverNOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
 	cFYI(1, ("serverNOS=%s", ses->serverNOS));
 	len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
 	data += len;
@@ -318,7 +318,7 @@ decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
 		return;
 
 	kfree(ses->serverDomain);
-	ses->serverDomain = cifs_strndup(data, bleft, true, nls_cp);
+	ses->serverDomain = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
 	cFYI(1, ("serverDomain=%s", ses->serverDomain));
 
 	return;
-- 
cgit v1.2.3


From 9e39b0ae8af46c83b85dae7ff5251911a80fce5a Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 30 Apr 2009 21:31:15 +0000
Subject: [CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped
 status

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 2 --
 fs/cifs/link.c    | 9 ++-------
 fs/cifs/netmisc.c | 2 ++
 fs/cifs/nterr.h   | 9 +++++++--
 fs/cifs/smberr.h  | 1 +
 5 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 39f5362e2cb..9d2ebab53db 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3509,8 +3509,6 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 					   struct nls_table *nls_info)
 {
 	int rc = 0;
-	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
-	bool ntlmv2_flag = false;
 	int first_time = 0;
 	struct TCP_Server_Info *server = pSesInfo->server;
 
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index e17a092f43e..eb2fbbe865d 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -257,13 +257,8 @@ cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
 
 /* BB add read reparse point symlink code and
 	Unix extensions symlink code here BB */
-/* We could disable this based on pTcon->unix_ext flag instead ... but why? */
-	if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
-		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-				tmpbuffer,
-				len - 1,
-				cifs_sb->local_nls);
-	else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
 		cERROR(1, ("SFU style symlinks not implemented yet"));
 		/* add open and read as in fs/cifs/inode.c */
 	} else {
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8703d68f5b2..e2fe998989a 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -79,6 +79,7 @@ static const struct smb_to_posix_error mapping_table_ERRDOS[] = {
 	{ErrQuota, -EDQUOT},
 	{ErrNotALink, -ENOLINK},
 	{ERRnetlogonNotStarted, -ENOPROTOOPT},
+	{ERRsymlink, -EOPNOTSUPP},
 	{ErrTooManyLinks, -EMLINK},
 	{0, 0}
 };
@@ -714,6 +715,7 @@ static const struct {
 	ERRDOS, ERRnoaccess, 0xc000028f}, {
 	ERRDOS, ERRnoaccess, 0xc0000290}, {
 	ERRDOS, ERRbadfunc, 0xc000029c}, {
+	ERRDOS, ERRsymlink, NT_STATUS_STOPPED_ON_SYMLINK}, {
 	ERRDOS, ERRinvlevel, 0x007c0001}, };
 
 /*****************************************************************************
diff --git a/fs/cifs/nterr.h b/fs/cifs/nterr.h
index 588abbb9d08..257267367d4 100644
--- a/fs/cifs/nterr.h
+++ b/fs/cifs/nterr.h
@@ -35,8 +35,6 @@ struct nt_err_code_struct {
 extern const struct nt_err_code_struct nt_errs[];
 
 /* Win32 Status codes. */
-
-#define STATUS_BUFFER_OVERFLOW            0x80000005
 #define STATUS_MORE_ENTRIES               0x0105
 #define ERROR_INVALID_PARAMETER		  0x0057
 #define ERROR_INSUFFICIENT_BUFFER	  0x007a
@@ -50,6 +48,13 @@ extern const struct nt_err_code_struct nt_errs[];
 #define STATUS_SOME_UNMAPPED       0x0107
 #define STATUS_BUFFER_OVERFLOW     0x80000005
 #define NT_STATUS_NO_MORE_ENTRIES  0x8000001a
+#define NT_STATUS_MEDIA_CHANGED    0x8000001c
+#define NT_STATUS_END_OF_MEDIA     0x8000001e
+#define NT_STATUS_MEDIA_CHECK      0x80000020
+#define NT_STATUS_NO_DATA_DETECTED 0x8000001c
+#define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
+#define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
+#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000288
 #define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
 #define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
 #define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h
index 7f50e8577c1..c5084d27db7 100644
--- a/fs/cifs/smberr.h
+++ b/fs/cifs/smberr.h
@@ -110,6 +110,7 @@
 
 /* Below errors are used internally (do not come over the wire) for passthrough
    from STATUS codes to POSIX only  */
+#define ERRsymlink              0xFFFD
 #define ErrTooManyLinks         0xFFFE
 
 /* Following error codes may be generated with the ERRSRV error class.*/
-- 
cgit v1.2.3


From 049ef7e40fc9959db480b2753a1dbe734d98e948 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Thu, 30 Apr 2009 14:43:43 -0700
Subject: drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.

i386 has inline code for writeq and readq, so just use those instead of ugly
macros which evaluate arguments multiple times.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 25065923b8a..df08eb4240b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -705,13 +705,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev);
 #define I915_WRITE16(reg, val)	writel(val, dev_priv->regs + (reg))
 #define I915_READ8(reg)		readb(dev_priv->regs + (reg))
 #define I915_WRITE8(reg, val)	writeb(val, dev_priv->regs + (reg))
-#ifdef writeq
 #define I915_WRITE64(reg, val)	writeq(val, dev_priv->regs + (reg))
-#else
-#define I915_WRITE64(reg, val)	(writel(val, dev_priv->regs + (reg)), \
-				 writel(upper_32_bits(val), dev_priv->regs + \
-					(reg) + 4))
-#endif
+#define I915_READ64(reg)	readq(dev_priv->regs + (reg))
 #define POSTING_READ(reg)	(void)I915_READ(reg)
 
 #define I915_VERBOSE 0
-- 
cgit v1.2.3


From 79f11c19a396e8cea7dad322dcfb46c0a8517fe6 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Thu, 30 Apr 2009 14:43:44 -0700
Subject: drm/i915: save/restore fence registers across suspend/resume

This makes software fallbacks not do tiling wrong on i965 and later after
resume. It also should fix 945 performance reduction after resume which
would have disabled tiling without causing any visible effect.

Signed-off-by: Keith Packard <keithp@keithp.com>
[anholt: Fixed up the 915 case to not save/restore the new regs]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h     |  1 +
 drivers/gpu/drm/i915/i915_suspend.c | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index df08eb4240b..b47af07f391 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -283,6 +283,7 @@ typedef struct drm_i915_private {
 	u8 saveAR[21];
 	u8 saveDACMASK;
 	u8 saveCR[37];
+	uint64_t saveFENCE[16];
 
 	struct {
 		struct drm_mm gtt_space;
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index d669cc2b42c..ce8a21344a7 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -349,6 +349,18 @@ int i915_save_state(struct drm_device *dev)
 	for (i = 0; i < 3; i++)
 		dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
 
+	/* Fences */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+	} else {
+		for (i = 0; i < 8; i++)
+			dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+	}
 	i915_save_vga(dev);
 
 	return 0;
@@ -371,6 +383,18 @@ int i915_restore_state(struct drm_device *dev)
 	/* Display arbitration */
 	I915_WRITE(DSPARB, dev_priv->saveDSPARB);
 
+	/* Fences */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+	} else {
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+	}
+
 	/* Pipe & plane A info */
 	/* Prime the clock */
 	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
-- 
cgit v1.2.3


From 18295796a30cada84e933d805072dc2248d54f98 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 30 Apr 2009 20:45:45 -0400
Subject: cifs: fix length handling in cifs_get_name_from_search_buf

The earlier patch to move this code to use the new unicode helpers
assumed that the filename strings would be null terminated. That's not
always the case.

Instead of passing "max_len" to the string converter, pass "min(len,
max_len)", which makes it do the right thing while still keeping the
parser confined to the response. Also fix up the prototypes of this
function and the callers so that max_len is unsigned (like len is).

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/readdir.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index e1351fe18a1..5bc9ab7586b 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -829,7 +829,7 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon,
 /* inode num, inode type and filename returned */
 static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	char *current_entry, __u16 level, unsigned int unicode,
-	struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
+	struct cifs_sb_info *cifs_sb, unsigned int max_len, __u64 *pinum)
 {
 	int rc = 0;
 	unsigned int len = 0;
@@ -890,7 +890,8 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	if (unicode) {
 		pqst->len = cifs_from_ucs2((char *) pqst->name,
 					   (__le16 *) filename,
-					   UNICODE_NAME_MAX, max_len, nlt,
+					   UNICODE_NAME_MAX,
+					   min(len, max_len), nlt,
 					   cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
 	} else {
@@ -902,8 +903,8 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
 	return rc;
 }
 
-static int cifs_filldir(char *pfindEntry, struct file *file,
-	filldir_t filldir, void *direntry, char *scratch_buf, int max_len)
+static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
+			void *direntry, char *scratch_buf, unsigned int max_len)
 {
 	int rc = 0;
 	struct qstr qstring;
@@ -1000,7 +1001,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 	int num_to_fill = 0;
 	char *tmp_buf = NULL;
 	char *end_of_smb;
-	int max_len;
+	unsigned int max_len;
 
 	xid = GetXid();
 
-- 
cgit v1.2.3


From cf398e3a117b2b63da724c2365d53ce31bd7240a Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 03:50:42 +0000
Subject: [CIFS] Fix build warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_dfs_ref.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 896b08fb1ec..83d62759c7c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -340,9 +340,9 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
 		cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
 
 	for (i = 0; i < num_referrals; i++) {
+		int len;
 		dump_referral(referrals+i);
 		/* connect to a node */
-		int len;
 		len = strlen(referrals[i].node_name);
 		if (len < 2) {
 			cERROR(1, ("%s: Net Address path too short: %s",
-- 
cgit v1.2.3


From e14b2fe1e64d3e4bd2f328ff9d1969f318f55954 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 04:37:43 +0000
Subject: [CIFS] Add remaining ntlmssp flags and standardize field names

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 30 ++++++++++++------------
 fs/cifs/ntlmssp.h | 68 ++++++++++++++++++++++++++++++++++---------------------
 2 files changed, 57 insertions(+), 41 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 9d2ebab53db..5bce2778163 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2686,13 +2686,13 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 	/* setup pointers to domain name and workstation name */
 	bcc_ptr += SecurityBlobLength;
 
-	SecurityBlob->WorkstationName.Buffer = 0;
+	SecurityBlob->WorkstationName.BufferOffset = 0;
 	SecurityBlob->WorkstationName.Length = 0;
 	SecurityBlob->WorkstationName.MaximumLength = 0;
 
 	/* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
 	along with username on auth request (ie the response to challenge) */
-	SecurityBlob->DomainName.Buffer = 0;
+	SecurityBlob->DomainName.BufferOffset = 0;
 	SecurityBlob->DomainName.Length = 0;
 	SecurityBlob->DomainName.MaximumLength = 0;
 	if (ses->capabilities & CAP_UNICODE) {
@@ -3020,30 +3020,30 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 
 /* setup pointers to domain name and workstation name */
 
-	SecurityBlob->WorkstationName.Buffer = 0;
+	SecurityBlob->WorkstationName.BufferOffset = 0;
 	SecurityBlob->WorkstationName.Length = 0;
 	SecurityBlob->WorkstationName.MaximumLength = 0;
 	SecurityBlob->SessionKey.Length = 0;
 	SecurityBlob->SessionKey.MaximumLength = 0;
-	SecurityBlob->SessionKey.Buffer = 0;
+	SecurityBlob->SessionKey.BufferOffset = 0;
 
 	SecurityBlob->LmChallengeResponse.Length = 0;
 	SecurityBlob->LmChallengeResponse.MaximumLength = 0;
-	SecurityBlob->LmChallengeResponse.Buffer = 0;
+	SecurityBlob->LmChallengeResponse.BufferOffset = 0;
 
 	SecurityBlob->NtChallengeResponse.Length =
 	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
 	SecurityBlob->NtChallengeResponse.MaximumLength =
 	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
 	memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
-	SecurityBlob->NtChallengeResponse.Buffer =
+	SecurityBlob->NtChallengeResponse.BufferOffset =
 	    cpu_to_le32(SecurityBlobLength);
 	SecurityBlobLength += CIFS_SESS_KEY_SIZE;
 	bcc_ptr += CIFS_SESS_KEY_SIZE;
 
 	if (ses->capabilities & CAP_UNICODE) {
 		if (domain == NULL) {
-			SecurityBlob->DomainName.Buffer = 0;
+			SecurityBlob->DomainName.BufferOffset = 0;
 			SecurityBlob->DomainName.Length = 0;
 			SecurityBlob->DomainName.MaximumLength = 0;
 		} else {
@@ -3052,14 +3052,14 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			ln *= 2;
 			SecurityBlob->DomainName.MaximumLength =
 			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.Buffer =
+			SecurityBlob->DomainName.BufferOffset =
 			    cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
 			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
 		}
 		if (user == NULL) {
-			SecurityBlob->UserName.Buffer = 0;
+			SecurityBlob->UserName.BufferOffset = 0;
 			SecurityBlob->UserName.Length = 0;
 			SecurityBlob->UserName.MaximumLength = 0;
 		} else {
@@ -3068,7 +3068,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			ln *= 2;
 			SecurityBlob->UserName.MaximumLength =
 			    cpu_to_le16(ln);
-			SecurityBlob->UserName.Buffer =
+			SecurityBlob->UserName.BufferOffset =
 			    cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
@@ -3080,7 +3080,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 		   SecurityBlob->WorkstationName.Length *= 2;
 		   SecurityBlob->WorkstationName.MaximumLength =
 			cpu_to_le16(SecurityBlob->WorkstationName.Length);
-		   SecurityBlob->WorkstationName.Buffer =
+		   SecurityBlob->WorkstationName.BufferOffset =
 				 cpu_to_le32(SecurityBlobLength);
 		   bcc_ptr += SecurityBlob->WorkstationName.Length;
 		   SecurityBlobLength += SecurityBlob->WorkstationName.Length;
@@ -3112,7 +3112,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 		bcc_ptr += 2;	/* null domain */
 	} else {		/* ASCII */
 		if (domain == NULL) {
-			SecurityBlob->DomainName.Buffer = 0;
+			SecurityBlob->DomainName.BufferOffset = 0;
 			SecurityBlob->DomainName.Length = 0;
 			SecurityBlob->DomainName.MaximumLength = 0;
 		} else {
@@ -3122,14 +3122,14 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			ln = strnlen(domain, 64);
 			SecurityBlob->DomainName.MaximumLength =
 			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.Buffer =
+			SecurityBlob->DomainName.BufferOffset =
 			    cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
 			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
 		}
 		if (user == NULL) {
-			SecurityBlob->UserName.Buffer = 0;
+			SecurityBlob->UserName.BufferOffset = 0;
 			SecurityBlob->UserName.Length = 0;
 			SecurityBlob->UserName.MaximumLength = 0;
 		} else {
@@ -3137,7 +3137,7 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 			strncpy(bcc_ptr, user, 63);
 			ln = strnlen(user, 64);
 			SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
-			SecurityBlob->UserName.Buffer =
+			SecurityBlob->UserName.BufferOffset =
 						cpu_to_le32(SecurityBlobLength);
 			bcc_ptr += ln;
 			SecurityBlobLength += ln;
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index c377d8065d9..49c9a4e7531 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -27,29 +27,39 @@
 #define UnknownMessage    cpu_to_le32(8)
 
 /* Negotiate Flags */
-#define NTLMSSP_NEGOTIATE_UNICODE       0x01 /* Text strings are in unicode */
-#define NTLMSSP_NEGOTIATE_OEM           0x02 /* Text strings are in OEM */
-#define NTLMSSP_REQUEST_TARGET          0x04 /* Server return its auth realm */
-#define NTLMSSP_NEGOTIATE_SIGN        0x0010 /* Request signature capability */
-#define NTLMSSP_NEGOTIATE_SEAL        0x0020 /*  Request confidentiality */
-#define NTLMSSP_NEGOTIATE_DGRAM       0x0040
-#define NTLMSSP_NEGOTIATE_LM_KEY      0x0080 /* Sign/seal use LM session key */
-#define NTLMSSP_NEGOTIATE_NTLM        0x0200 /* NTLM authentication */
-#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000
+#define NTLMSSP_NEGOTIATE_UNICODE         0x01 /* Text strings are unicode */
+#define NTLMSSP_NEGOTIATE_OEM             0x02 /* Text strings are in OEM */
+#define NTLMSSP_REQUEST_TARGET            0x04 /* Srv returns its auth realm */
+/* define reserved9                       0x08 */
+#define NTLMSSP_NEGOTIATE_SIGN          0x0010 /* Request signing capability */
+#define NTLMSSP_NEGOTIATE_SEAL          0x0020 /* Request confidentiality */
+#define NTLMSSP_NEGOTIATE_DGRAM         0x0040
+#define NTLMSSP_NEGOTIATE_LM_KEY        0x0080 /* Use LM session key */
+/* defined reserved 8                   0x0100 */
+#define NTLMSSP_NEGOTIATE_NTLM          0x0200 /* NTLM authentication */
+#define NTLMSSP_NEGOTIATE_NT_ONLY       0x0400 /* Lanman not allowed */
+#define NTLMSSP_ANONYMOUS               0x0800
+#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000 /* reserved6 */
 #define NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED 0x2000
-#define NTLMSSP_NEGOTIATE_LOCAL_CALL  0x4000 /* client/server on same machine */
-#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign for all security levels */
-#define NTLMSSP_TARGET_TYPE_DOMAIN   0x10000
-#define NTLMSSP_TARGET_TYPE_SERVER   0x20000
-#define NTLMSSP_TARGET_TYPE_SHARE    0x40000
-#define NTLMSSP_NEGOTIATE_NTLMV2     0x80000
-#define NTLMSSP_REQUEST_INIT_RESP   0x100000
-#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000
-#define NTLMSSP_REQUEST_NOT_NT_KEY  0x400000
+#define NTLMSSP_NEGOTIATE_LOCAL_CALL    0x4000 /* client/server same machine */
+#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN   0x8000 /* Sign. All security levels  */
+#define NTLMSSP_TARGET_TYPE_DOMAIN     0x10000
+#define NTLMSSP_TARGET_TYPE_SERVER     0x20000
+#define NTLMSSP_TARGET_TYPE_SHARE      0x40000
+#define NTLMSSP_NEGOTIATE_EXTENDED_SEC 0x80000 /* NB:not related to NTLMv2 pwd*/
+/* #define NTLMSSP_REQUEST_INIT_RESP     0x100000 */
+#define NTLMSSP_NEGOTIATE_IDENTIFY    0x100000
+#define NTLMSSP_REQUEST_ACCEPT_RESP   0x200000 /* reserved5 */
+#define NTLMSSP_REQUEST_NON_NT_KEY    0x400000
 #define NTLMSSP_NEGOTIATE_TARGET_INFO 0x800000
-#define NTLMSSP_NEGOTIATE_128     0x20000000
-#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
-#define NTLMSSP_NEGOTIATE_56      0x80000000
+/* #define reserved4                 0x1000000 */
+#define NTLMSSP_NEGOTIATE_VERSION    0x2000000 /* we do not set */
+/* #define reserved3                 0x4000000 */
+/* #define reserved2                 0x8000000 */
+/* #define reserved1                0x10000000 */
+#define NTLMSSP_NEGOTIATE_128       0x20000000
+#define NTLMSSP_NEGOTIATE_KEY_XCH   0x40000000
+#define NTLMSSP_NEGOTIATE_56        0x80000000
 
 /* Although typedefs are not commonly used for structure definitions */
 /* in the Linux kernel, in this particular case they are useful      */
@@ -60,32 +70,36 @@
 typedef struct _SECURITY_BUFFER {
 	__le16 Length;
 	__le16 MaximumLength;
-	__le32 Buffer;		/* offset to buffer */
+	__le32 BufferOffset;	/* offset to buffer */
 } __attribute__((packed)) SECURITY_BUFFER;
 
 typedef struct _NEGOTIATE_MESSAGE {
 	__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
-	__le32 MessageType;     /* 1 */
+	__le32 MessageType;     /* NtLmNegotiate = 1 */
 	__le32 NegotiateFlags;
 	SECURITY_BUFFER DomainName;	/* RFC 1001 style and ASCII */
 	SECURITY_BUFFER WorkstationName;	/* RFC 1001 and ASCII */
+	/* SECURITY_BUFFER for version info not present since we
+	   do not set the version is present flag */
 	char DomainString[0];
 	/* followed by WorkstationString */
 } __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
 
 typedef struct _CHALLENGE_MESSAGE {
 	__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
-	__le32 MessageType;   /* 2 */
+	__le32 MessageType;   /* NtLmChallenge = 2 */
 	SECURITY_BUFFER TargetName;
 	__le32 NegotiateFlags;
 	__u8 Challenge[CIFS_CRYPTO_KEY_SIZE];
 	__u8 Reserved[8];
 	SECURITY_BUFFER TargetInfoArray;
+	/* SECURITY_BUFFER for version info not present since we
+	   do not set the version is present flag */
 } __attribute__((packed)) CHALLENGE_MESSAGE, *PCHALLENGE_MESSAGE;
 
 typedef struct _AUTHENTICATE_MESSAGE {
-	__u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
-	__le32 MessageType;  /* 3 */
+	__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
+	__le32 MessageType;  /* NtLmsAuthenticate = 3 */
 	SECURITY_BUFFER LmChallengeResponse;
 	SECURITY_BUFFER NtChallengeResponse;
 	SECURITY_BUFFER DomainName;
@@ -93,5 +107,7 @@ typedef struct _AUTHENTICATE_MESSAGE {
 	SECURITY_BUFFER WorkstationName;
 	SECURITY_BUFFER SessionKey;
 	__le32 NegotiateFlags;
+	/* SECURITY_BUFFER for version info not present since we
+	   do not set the version is present flag */
 	char UserString[0];
 } __attribute__((packed)) AUTHENTICATE_MESSAGE, *PAUTHENTICATE_MESSAGE;
-- 
cgit v1.2.3


From 0e0d2cf32743c660aab20e40aeb2155c06a256db Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 05:27:32 +0000
Subject: [CIFS] Remove sparse endian warnings

Removes two sparse CHECK_ENDIAN warnings from Jeffs earlier patch,
and removes the dead readlink code (after noting where in
findfirst we will need to add something like that in the future
to handle the newly discovered unexpected error on FindFirst of NTFS symlinks.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 14 +++++----
 fs/cifs/connect.c | 23 ++++++++-------
 fs/cifs/link.c    | 87 -------------------------------------------------------
 fs/cifs/readdir.c | 37 ++++++++++++++++++++++-
 4 files changed, 58 insertions(+), 103 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index df5276e628b..b968e5bd7df 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2451,16 +2451,20 @@ querySymLinkRetry:
 		if (rc || (pSMBr->ByteCount < 2))
 			rc = -EIO;
 		else {
+			bool is_unicode;
 			u16 count = le16_to_cpu(pSMBr->t2.DataCount);
 
 			data_start = ((char *) &pSMBr->hdr.Protocol) +
 					   le16_to_cpu(pSMBr->t2.DataOffset);
 
+			if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+				is_unicode = true;
+			else
+				is_unicode = false;
+
 			/* BB FIXME investigate remapping reserved chars here */
 			*symlinkinfo = cifs_strndup_from_ucs(data_start, count,
-						    pSMBr->hdr.Flags2 &
-							SMBFLG2_UNICODE,
-						    nls_codepage);
+						    is_unicode, nls_codepage);
 			if (!symlinkinfo)
 				rc = -ENOMEM;
 		}
@@ -3930,7 +3934,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 
 	cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
 			*num_of_nodes,
-			le16_to_cpu(pSMBr->DFSFlags)));
+			le32_to_cpu(pSMBr->DFSFlags)));
 
 	*target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
 			*num_of_nodes, GFP_KERNEL);
@@ -3946,7 +3950,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		int max_len;
 		struct dfs_info3_param *node = (*target_nodes)+i;
 
-		node->flags = le16_to_cpu(pSMBr->DFSFlags);
+		node->flags = le32_to_cpu(pSMBr->DFSFlags);
 		if (is_unicode) {
 			__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
 						GFP_KERNEL);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 5bce2778163..9dcdb0c707e 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2681,8 +2681,6 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 	    /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
 	if (sign_CIFS_PDUs)
 		negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-/*	if (ntlmv2_support)
-		negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;*/
 	/* setup pointers to domain name and workstation name */
 	bcc_ptr += SecurityBlobLength;
 
@@ -2780,9 +2778,10 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 				memcpy(ses->server->cryptKey,
 				       SecurityBlob2->Challenge,
 				       CIFS_CRYPTO_KEY_SIZE);
-				if (SecurityBlob2->NegotiateFlags &
+/* NTLMV2 flag is not for NTLMv2 password hash */
+/*				if (SecurityBlob2->NegotiateFlags &
 					cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
-					*pNTLMv2_flag = true;
+					*pNTLMv2_flag = true; */ /* BB wrong */
 
 				if ((SecurityBlob2->NegotiateFlags &
 					cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
@@ -3012,11 +3011,10 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 	bcc_ptr += SecurityBlobLength;
 	negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
 			NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
-			0x80000000 | NTLMSSP_NEGOTIATE_128;
+			NTLMSSP_NEGOTIATE_56 | NTLMSSP_NEGOTIATE_128 |
+			NTLMSSP_NEGOTIATE_EXTENDED_SEC;
 	if (sign_CIFS_PDUs)
 		negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
-	if (ntlmv2_flag)
-		negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;
 
 /* setup pointers to domain name and workstation name */
 
@@ -3438,12 +3436,19 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 
 	/* above now done in SendReceive */
 	if ((rc == 0) && (tcon != NULL)) {
+		bool is_unicode;
+
 		tcon->tidStatus = CifsGood;
 		tcon->need_reconnect = false;
 		tcon->tid = smb_buffer_response->Tid;
 		bcc_ptr = pByteArea(smb_buffer_response);
 		bytes_left = BCC(smb_buffer_response);
 		length = strnlen(bcc_ptr, bytes_left - 2);
+		if (smb_buffer->Flags2 & SMBFLG2_UNICODE)
+			is_unicode = true;
+		else
+			is_unicode = false;
+
 
 		/* skip service field (NB: this field is always ASCII) */
 		if (length == 3) {
@@ -3464,9 +3469,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 
 		/* mostly informational -- no need to fail on error here */
 		tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
-						      bytes_left,
-						      smb_buffer->Flags2 &
-							 SMBFLG2_UNICODE,
+						      bytes_left, is_unicode,
 						      nls_codepage);
 
 		cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index eb2fbbe865d..ea9d11e3dcb 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -212,93 +212,6 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
 	return rc;
 }
 
-int
-cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
-{
-	struct inode *inode = direntry->d_inode;
-	int rc = -EACCES;
-	int xid;
-	int oplock = 0;
-	struct cifs_sb_info *cifs_sb;
-	struct cifsTconInfo *pTcon;
-	char *full_path = NULL;
-	char *tmpbuffer;
-	int len;
-	__u16 fid;
-
-	xid = GetXid();
-	cifs_sb = CIFS_SB(inode->i_sb);
-	pTcon = cifs_sb->tcon;
-
-/* BB would it be safe against deadlock to grab this sem
-      even though rename itself grabs the sem and calls lookup? */
-/*       mutex_lock(&inode->i_sb->s_vfs_rename_mutex);*/
-	full_path = build_path_from_dentry(direntry);
-/*       mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);*/
-
-	if (full_path == NULL) {
-		FreeXid(xid);
-		return -ENOMEM;
-	}
-
-	cFYI(1,
-	     ("Full path: %s inode = 0x%p pBuffer = 0x%p buflen = %d",
-	      full_path, inode, pBuffer, buflen));
-	if (buflen > PATH_MAX)
-		len = PATH_MAX;
-	else
-		len = buflen;
-	tmpbuffer = kmalloc(len, GFP_KERNEL);
-	if (tmpbuffer == NULL) {
-		kfree(full_path);
-		FreeXid(xid);
-		return -ENOMEM;
-	}
-
-/* BB add read reparse point symlink code and
-	Unix extensions symlink code here BB */
-
-	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
-		cERROR(1, ("SFU style symlinks not implemented yet"));
-		/* add open and read as in fs/cifs/inode.c */
-	} else {
-		rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, GENERIC_READ,
-				OPEN_REPARSE_POINT, &fid, &oplock, NULL,
-				cifs_sb->local_nls,
-				cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
-		if (!rc) {
-			rc = CIFSSMBQueryReparseLinkInfo(xid, pTcon, full_path,
-				tmpbuffer,
-				len - 1,
-				fid,
-				cifs_sb->local_nls);
-			if (CIFSSMBClose(xid, pTcon, fid)) {
-				cFYI(1, ("Error closing junction point "
-					 "(open for ioctl)"));
-			}
-			/* If it is a DFS junction earlier we would have gotten
-			   PATH_NOT_COVERED returned from server so we do
-			   not need to request the DFS info here */
-		}
-	}
-	/* BB Anything else to do to handle recursive links? */
-	/* BB Should we be using page ops here? */
-
-	/* BB null terminate returned string in pBuffer? BB */
-	if (rc == 0) {
-		rc = vfs_readlink(direntry, pBuffer, len, tmpbuffer);
-		cFYI(1,
-		     ("vfs_readlink called from cifs_readlink returned %d",
-		      rc));
-	}
-
-	kfree(tmpbuffer);
-	kfree(full_path);
-	FreeXid(xid);
-	return rc;
-}
-
 void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *cookie)
 {
 	char *p = nd_get_link(nd);
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 5bc9ab7586b..df003fe3710 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -445,6 +445,38 @@ static void unix_fill_in_inode(struct inode *tmp_inode,
 	}
 }
 
+/* BB eventually need to add the following helper function to
+      resolve NT_STATUS_STOPPED_ON_SYMLINK return code when
+      we try to do FindFirst on (NTFS) directory symlinks */
+/*
+int get_symlink_reparse_path(char *full_path, struct cifs_sb_info *cifs_sb,
+			     int xid)
+{
+	__u16 fid;
+	int len;
+	int oplock = 0;
+	int rc;
+	struct cifsTconInfo *ptcon = cifs_sb->tcon;
+	char *tmpbuffer;
+
+	rc = CIFSSMBOpen(xid, ptcon, full_path, FILE_OPEN, GENERIC_READ,
+			OPEN_REPARSE_POINT, &fid, &oplock, NULL,
+			cifs_sb->local_nls,
+			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+	if (!rc) {
+		tmpbuffer = kmalloc(maxpath);
+		rc = CIFSSMBQueryReparseLinkInfo(xid, ptcon, full_path,
+				tmpbuffer,
+				maxpath -1,
+				fid,
+				cifs_sb->local_nls);
+		if (CIFSSMBClose(xid, ptcon, fid)) {
+			cFYI(1, ("Error closing temporary reparsepoint open)"));
+		}
+	}
+}
+ */
+
 static int initiate_cifs_search(const int xid, struct file *file)
 {
 	int rc = 0;
@@ -500,7 +532,10 @@ ffirst_retry:
 			CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
 	if (rc == 0)
 		cifsFile->invalidHandle = false;
-	if ((rc == -EOPNOTSUPP) &&
+	/* BB add following call to handle readdir on new NTFS symlink errors 
+	else if STATUS_STOPPED_ON_SYMLINK
+		call get_symlink_reparse_path and retry with new path */
+	else if ((rc == -EOPNOTSUPP) &&
 		(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
 		cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
 		goto ffirst_retry;
-- 
cgit v1.2.3


From 595e8fabea22c96f674102f33b4a759f4512dd9c Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Sun, 26 Apr 2009 14:18:25 +0200
Subject: microblaze: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo-static.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index cfe44effdb7..450ca6bb828 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -14,8 +14,8 @@
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
-const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
-const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
 	early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
-- 
cgit v1.2.3


From c71a7a3875b40d18a08c09f6c757bd7a9b6ce894 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 30 Apr 2009 09:35:53 +0200
Subject: microblaze: Fix return value for sys_ipc

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/sys_microblaze.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index ba0568c2cc1..31905ff590b 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 		ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
 		break;
 	}
-	return -EINVAL;
+	return ret;
 }
 
 asmlinkage int sys_vfork(struct pt_regs *regs)
-- 
cgit v1.2.3


From e836f015b5c07da2f95a441274ef0a788ce17f80 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 16:20:35 +0000
Subject: [CIFS] Remove trailing whitespace

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES   | 4 +++-
 fs/cifs/readdir.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1b0643c2eac..43f2e0d061f 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -6,7 +6,9 @@ characters. Add support for mounting root of a share which redirects immediately
 to DFS target. Convert string conversion functions from Unicode to more
 accurately mark string length before allocating memory (which may help the
 rare cases where a UTF-8 string is much larger than the UCS2 string that
-we converted from).
+we converted from).  Fix endianness of the vcnum field used during
+session setup to distinguish multiple mounts to same server from different
+userids.
  
 Version 1.57
 ------------
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index df003fe3710..964e097c820 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -532,7 +532,7 @@ ffirst_retry:
 			CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
 	if (rc == 0)
 		cifsFile->invalidHandle = false;
-	/* BB add following call to handle readdir on new NTFS symlink errors 
+	/* BB add following call to handle readdir on new NTFS symlink errors
 	else if STATUS_STOPPED_ON_SYMLINK
 		call get_symlink_reparse_path and retry with new path */
 	else if ((rc == -EOPNOTSUPP) &&
-- 
cgit v1.2.3


From 051a2a0d3242b448281376bb63cfa9385e0b6c68 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 1 May 2009 16:21:04 +0000
Subject: [CIFS] Fix endian conversion of vcnum field

When multiply mounting from the same client to the same server, with
different userids, we create a vcnum which should be unique if
possible (this is not the same as the smb uid, which is the handle
to the security context).  We were not endian converting additional
(beyond the first which is zero) vcnum properly.

CC: Stable <stable@kernel.org>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 2bcff17047a..b2bdc2a3383 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -111,7 +111,7 @@ static __le16 get_next_vcnum(struct cifsSesInfo *ses)
 get_vc_num_exit:
 	write_unlock(&cifs_tcp_ses_lock);
 
-	return le16_to_cpu(vcnum);
+	return cpu_to_le16(vcnum);
 }
 
 static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
-- 
cgit v1.2.3


From 2edd6c5b0517b9131ede9e74cb121898ccd73042 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 04:55:39 +0000
Subject: [CIFS] NTLMSSP support moving into new file, old dead code removed

Remove dead NTLMSSP support from connect.c prior to addition of
the new code to replace it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 730 ------------------------------------------------------
 1 file changed, 730 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 9dcdb0c707e..3a934dd8422 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2605,736 +2605,6 @@ out:
 	return rc;
 }
 
-static int
-CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
-			      struct cifsSesInfo *ses, bool *pNTLMv2_flag,
-			      const struct nls_table *nls_codepage)
-{
-	struct smb_hdr *smb_buffer;
-	struct smb_hdr *smb_buffer_response;
-	SESSION_SETUP_ANDX *pSMB;
-	SESSION_SETUP_ANDX *pSMBr;
-	char *bcc_ptr;
-	char *domain;
-	int rc = 0;
-	int remaining_words = 0;
-	int bytes_returned = 0;
-	int len;
-	int SecurityBlobLength = sizeof(NEGOTIATE_MESSAGE);
-	PNEGOTIATE_MESSAGE SecurityBlob;
-	PCHALLENGE_MESSAGE SecurityBlob2;
-	__u32 negotiate_flags, capabilities;
-	__u16 count;
-
-	cFYI(1, ("In NTLMSSP sesssetup (negotiate)"));
-	if (ses == NULL)
-		return -EINVAL;
-	domain = ses->domainName;
-	*pNTLMv2_flag = false;
-	smb_buffer = cifs_buf_get();
-	if (smb_buffer == NULL) {
-		return -ENOMEM;
-	}
-	smb_buffer_response = smb_buffer;
-	pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-	pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-
-	/* send SMBsessionSetup here */
-	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-			NULL /* no tCon exists yet */ , 12 /* wct */ );
-
-	smb_buffer->Mid = GetNextMid(ses->server);
-	pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
-	pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-
-	pSMB->req.AndXCommand = 0xFF;
-	pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-	pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
-	if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
-	capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-	    CAP_EXTENDED_SECURITY;
-	if (ses->capabilities & CAP_UNICODE) {
-		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-		capabilities |= CAP_UNICODE;
-	}
-	if (ses->capabilities & CAP_STATUS32) {
-		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-		capabilities |= CAP_STATUS32;
-	}
-	if (ses->capabilities & CAP_DFS) {
-		smb_buffer->Flags2 |= SMBFLG2_DFS;
-		capabilities |= CAP_DFS;
-	}
-	pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
-	bcc_ptr = (char *) &pSMB->req.SecurityBlob;
-	SecurityBlob = (PNEGOTIATE_MESSAGE) bcc_ptr;
-	strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
-	SecurityBlob->MessageType = NtLmNegotiate;
-	negotiate_flags =
-	    NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
-	    NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM |
-	    NTLMSSP_NEGOTIATE_56 |
-	    /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
-	if (sign_CIFS_PDUs)
-		negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-	/* setup pointers to domain name and workstation name */
-	bcc_ptr += SecurityBlobLength;
-
-	SecurityBlob->WorkstationName.BufferOffset = 0;
-	SecurityBlob->WorkstationName.Length = 0;
-	SecurityBlob->WorkstationName.MaximumLength = 0;
-
-	/* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
-	along with username on auth request (ie the response to challenge) */
-	SecurityBlob->DomainName.BufferOffset = 0;
-	SecurityBlob->DomainName.Length = 0;
-	SecurityBlob->DomainName.MaximumLength = 0;
-	if (ses->capabilities & CAP_UNICODE) {
-		if ((long) bcc_ptr % 2) {
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
-				  nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;	/* null terminate Linux version */
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
-				  64, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null terminate network opsys string */
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null domain */
-	} else {		/* ASCII */
-		strcpy(bcc_ptr, "Linux version ");
-		bcc_ptr += strlen("Linux version ");
-		strcpy(bcc_ptr, utsname()->release);
-		bcc_ptr += strlen(utsname()->release) + 1;
-		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-		bcc_ptr++;	/* empty domain field */
-		*bcc_ptr = 0;
-	}
-	SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
-	pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
-	count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-	smb_buffer->smb_buf_length += count;
-	pSMB->req.ByteCount = cpu_to_le16(count);
-
-	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-			 &bytes_returned, CIFS_LONG_OP);
-
-	if (smb_buffer_response->Status.CifsError ==
-	    cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))
-		rc = 0;
-
-	if (rc) {
-/*    rc = map_smb_to_linux_error(smb_buffer_response);  *//* done in SendReceive now */
-	} else if ((smb_buffer_response->WordCount == 3)
-		   || (smb_buffer_response->WordCount == 4)) {
-		__u16 action = le16_to_cpu(pSMBr->resp.Action);
-		__u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-
-		if (action & GUEST_LOGIN)
-			cFYI(1, ("Guest login"));
-	/* Do we want to set anything in SesInfo struct when guest login? */
-
-		bcc_ptr = pByteArea(smb_buffer_response);
-	/* response can have either 3 or 4 word count - Samba sends 3 */
-
-		SecurityBlob2 = (PCHALLENGE_MESSAGE) bcc_ptr;
-		if (SecurityBlob2->MessageType != NtLmChallenge) {
-			cFYI(1, ("Unexpected NTLMSSP message type received %d",
-			      SecurityBlob2->MessageType));
-		} else if (ses) {
-			ses->Suid = smb_buffer_response->Uid; /* UID left in le format */
-			cFYI(1, ("UID = %d", ses->Suid));
-			if ((pSMBr->resp.hdr.WordCount == 3)
-			    || ((pSMBr->resp.hdr.WordCount == 4)
-				&& (blob_len <
-				    pSMBr->resp.ByteCount))) {
-
-				if (pSMBr->resp.hdr.WordCount == 4) {
-					bcc_ptr += blob_len;
-					cFYI(1, ("Security Blob Length %d",
-					      blob_len));
-				}
-
-				cFYI(1, ("NTLMSSP Challenge rcvd"));
-
-				memcpy(ses->server->cryptKey,
-				       SecurityBlob2->Challenge,
-				       CIFS_CRYPTO_KEY_SIZE);
-/* NTLMV2 flag is not for NTLMv2 password hash */
-/*				if (SecurityBlob2->NegotiateFlags &
-					cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
-					*pNTLMv2_flag = true; */ /* BB wrong */
-
-				if ((SecurityBlob2->NegotiateFlags &
-					cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
-					|| (sign_CIFS_PDUs > 1))
-						ses->server->secMode |=
-							SECMODE_SIGN_REQUIRED;
-				if ((SecurityBlob2->NegotiateFlags &
-					cpu_to_le32(NTLMSSP_NEGOTIATE_SIGN)) && (sign_CIFS_PDUs))
-						ses->server->secMode |=
-							SECMODE_SIGN_ENABLED;
-
-				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-					if ((long) (bcc_ptr) % 2) {
-						remaining_words =
-						    (BCC(smb_buffer_response)
-						     - 1) / 2;
-					 /* Must word align unicode strings */
-						bcc_ptr++;
-					} else {
-						remaining_words =
-						    BCC
-						    (smb_buffer_response) / 2;
-					}
-					len =
-					    UniStrnlen((wchar_t *) bcc_ptr,
-						       remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
-   the end since (at least) WIN2K and Windows XP have a major bug in not null
-   terminating last Unicode string in response  */
-					kfree(ses->serverOS);
-					ses->serverOS =
-					    kzalloc(2 * (len + 1), GFP_KERNEL);
-					cifs_strfromUCS_le(ses->serverOS,
-							   (__le16 *)
-							   bcc_ptr, len,
-							   nls_codepage);
-					bcc_ptr += 2 * (len + 1);
-					remaining_words -= len + 1;
-					ses->serverOS[2 * len] = 0;
-					ses->serverOS[1 + (2 * len)] = 0;
-					if (remaining_words > 0) {
-						len = UniStrnlen((wchar_t *)
-								 bcc_ptr,
-								 remaining_words
-								 - 1);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(2 * (len + 1),
-							    GFP_KERNEL);
-						cifs_strfromUCS_le(ses->
-								   serverNOS,
-								   (__le16 *)
-								   bcc_ptr,
-								   len,
-								   nls_codepage);
-						bcc_ptr += 2 * (len + 1);
-						ses->serverNOS[2 * len] = 0;
-						ses->serverNOS[1 +
-							       (2 * len)] = 0;
-						remaining_words -= len + 1;
-						if (remaining_words > 0) {
-							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
-				/* last string not always null terminated
-				   (for e.g. for Windows XP & 2000) */
-							kfree(ses->serverDomain);
-							ses->serverDomain =
-							    kzalloc(2 *
-								    (len +
-								     1),
-								    GFP_KERNEL);
-							cifs_strfromUCS_le
-							    (ses->serverDomain,
-							     (__le16 *)bcc_ptr,
-							     len, nls_codepage);
-							bcc_ptr +=
-							    2 * (len + 1);
-							ses->serverDomain[2*len]
-							    = 0;
-							ses->serverDomain
-								[1 + (2 * len)]
-							    = 0;
-						} /* else no more room so create dummy domain string */
-						else {
-							kfree(ses->serverDomain);
-							ses->serverDomain =
-							    kzalloc(2,
-								    GFP_KERNEL);
-						}
-					} else {	/* no room so create dummy domain and NOS string */
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-						    kzalloc(2, GFP_KERNEL);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(2, GFP_KERNEL);
-					}
-				} else {	/* ASCII */
-					len = strnlen(bcc_ptr, 1024);
-					if (((long) bcc_ptr + len) - (long)
-					    pByteArea(smb_buffer_response)
-					    <= BCC(smb_buffer_response)) {
-						kfree(ses->serverOS);
-						ses->serverOS =
-						    kzalloc(len + 1,
-							    GFP_KERNEL);
-						strncpy(ses->serverOS,
-							bcc_ptr, len);
-
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;	/* null terminate string */
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(len + 1,
-							    GFP_KERNEL);
-						strncpy(ses->serverNOS, bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-						    kzalloc(len + 1,
-							    GFP_KERNEL);
-						strncpy(ses->serverDomain,
-							bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-					} else
-						cFYI(1,
-						     ("field of length %d "
-						    "extends beyond end of smb",
-						      len));
-				}
-			} else {
-				cERROR(1, ("Security Blob Length extends beyond"
-					   " end of SMB"));
-			}
-		} else {
-			cERROR(1, ("No session structure passed in."));
-		}
-	} else {
-		cERROR(1, ("Invalid Word count %d:",
-			smb_buffer_response->WordCount));
-		rc = -EIO;
-	}
-
-	cifs_buf_release(smb_buffer);
-
-	return rc;
-}
-
-static int
-CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
-			char *ntlm_session_key, bool ntlmv2_flag,
-			const struct nls_table *nls_codepage)
-{
-	struct smb_hdr *smb_buffer;
-	struct smb_hdr *smb_buffer_response;
-	SESSION_SETUP_ANDX *pSMB;
-	SESSION_SETUP_ANDX *pSMBr;
-	char *bcc_ptr;
-	char *user;
-	char *domain;
-	int rc = 0;
-	int remaining_words = 0;
-	int bytes_returned = 0;
-	int len;
-	int SecurityBlobLength = sizeof(AUTHENTICATE_MESSAGE);
-	PAUTHENTICATE_MESSAGE SecurityBlob;
-	__u32 negotiate_flags, capabilities;
-	__u16 count;
-
-	cFYI(1, ("In NTLMSSPSessSetup (Authenticate)"));
-	if (ses == NULL)
-		return -EINVAL;
-	user = ses->userName;
-	domain = ses->domainName;
-	smb_buffer = cifs_buf_get();
-	if (smb_buffer == NULL) {
-		return -ENOMEM;
-	}
-	smb_buffer_response = smb_buffer;
-	pSMB = (SESSION_SETUP_ANDX *)smb_buffer;
-	pSMBr = (SESSION_SETUP_ANDX *)smb_buffer_response;
-
-	/* send SMBsessionSetup here */
-	header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
-			NULL /* no tCon exists yet */ , 12 /* wct */ );
-
-	smb_buffer->Mid = GetNextMid(ses->server);
-	pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-	pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
-	pSMB->req.AndXCommand = 0xFF;
-	pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
-	pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
-	pSMB->req.hdr.Uid = ses->Suid;
-
-	if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
-	capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
-			CAP_EXTENDED_SECURITY;
-	if (ses->capabilities & CAP_UNICODE) {
-		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
-		capabilities |= CAP_UNICODE;
-	}
-	if (ses->capabilities & CAP_STATUS32) {
-		smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
-		capabilities |= CAP_STATUS32;
-	}
-	if (ses->capabilities & CAP_DFS) {
-		smb_buffer->Flags2 |= SMBFLG2_DFS;
-		capabilities |= CAP_DFS;
-	}
-	pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
-	bcc_ptr = (char *)&pSMB->req.SecurityBlob;
-	SecurityBlob = (PAUTHENTICATE_MESSAGE)bcc_ptr;
-	strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
-	SecurityBlob->MessageType = NtLmAuthenticate;
-	bcc_ptr += SecurityBlobLength;
-	negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
-			NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
-			NTLMSSP_NEGOTIATE_56 | NTLMSSP_NEGOTIATE_128 |
-			NTLMSSP_NEGOTIATE_EXTENDED_SEC;
-	if (sign_CIFS_PDUs)
-		negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
-
-/* setup pointers to domain name and workstation name */
-
-	SecurityBlob->WorkstationName.BufferOffset = 0;
-	SecurityBlob->WorkstationName.Length = 0;
-	SecurityBlob->WorkstationName.MaximumLength = 0;
-	SecurityBlob->SessionKey.Length = 0;
-	SecurityBlob->SessionKey.MaximumLength = 0;
-	SecurityBlob->SessionKey.BufferOffset = 0;
-
-	SecurityBlob->LmChallengeResponse.Length = 0;
-	SecurityBlob->LmChallengeResponse.MaximumLength = 0;
-	SecurityBlob->LmChallengeResponse.BufferOffset = 0;
-
-	SecurityBlob->NtChallengeResponse.Length =
-	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
-	SecurityBlob->NtChallengeResponse.MaximumLength =
-	    cpu_to_le16(CIFS_SESS_KEY_SIZE);
-	memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
-	SecurityBlob->NtChallengeResponse.BufferOffset =
-	    cpu_to_le32(SecurityBlobLength);
-	SecurityBlobLength += CIFS_SESS_KEY_SIZE;
-	bcc_ptr += CIFS_SESS_KEY_SIZE;
-
-	if (ses->capabilities & CAP_UNICODE) {
-		if (domain == NULL) {
-			SecurityBlob->DomainName.BufferOffset = 0;
-			SecurityBlob->DomainName.Length = 0;
-			SecurityBlob->DomainName.MaximumLength = 0;
-		} else {
-			__u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
-					  nls_codepage);
-			ln *= 2;
-			SecurityBlob->DomainName.MaximumLength =
-			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.BufferOffset =
-			    cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
-		}
-		if (user == NULL) {
-			SecurityBlob->UserName.BufferOffset = 0;
-			SecurityBlob->UserName.Length = 0;
-			SecurityBlob->UserName.MaximumLength = 0;
-		} else {
-			__u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, user, 64,
-					  nls_codepage);
-			ln *= 2;
-			SecurityBlob->UserName.MaximumLength =
-			    cpu_to_le16(ln);
-			SecurityBlob->UserName.BufferOffset =
-			    cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->UserName.Length = cpu_to_le16(ln);
-		}
-
-		/* SecurityBlob->WorkstationName.Length =
-		 cifs_strtoUCS((__le16 *) bcc_ptr, "AMACHINE",64, nls_codepage);
-		   SecurityBlob->WorkstationName.Length *= 2;
-		   SecurityBlob->WorkstationName.MaximumLength =
-			cpu_to_le16(SecurityBlob->WorkstationName.Length);
-		   SecurityBlob->WorkstationName.BufferOffset =
-				 cpu_to_le32(SecurityBlobLength);
-		   bcc_ptr += SecurityBlob->WorkstationName.Length;
-		   SecurityBlobLength += SecurityBlob->WorkstationName.Length;
-		   SecurityBlob->WorkstationName.Length =
-			cpu_to_le16(SecurityBlob->WorkstationName.Length);  */
-
-		if ((long) bcc_ptr % 2) {
-			*bcc_ptr = 0;
-			bcc_ptr++;
-		}
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
-				  32, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
-				  nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		bcc_ptr += 2;	/* null term version string */
-		bytes_returned =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
-				  64, nls_codepage);
-		bcc_ptr += 2 * bytes_returned;
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null terminate network opsys string */
-		*(bcc_ptr + 1) = 0;
-		*(bcc_ptr + 2) = 0;
-		bcc_ptr += 2;	/* null domain */
-	} else {		/* ASCII */
-		if (domain == NULL) {
-			SecurityBlob->DomainName.BufferOffset = 0;
-			SecurityBlob->DomainName.Length = 0;
-			SecurityBlob->DomainName.MaximumLength = 0;
-		} else {
-			__u16 ln;
-			negotiate_flags |= NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
-			strncpy(bcc_ptr, domain, 63);
-			ln = strnlen(domain, 64);
-			SecurityBlob->DomainName.MaximumLength =
-			    cpu_to_le16(ln);
-			SecurityBlob->DomainName.BufferOffset =
-			    cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->DomainName.Length = cpu_to_le16(ln);
-		}
-		if (user == NULL) {
-			SecurityBlob->UserName.BufferOffset = 0;
-			SecurityBlob->UserName.Length = 0;
-			SecurityBlob->UserName.MaximumLength = 0;
-		} else {
-			__u16 ln;
-			strncpy(bcc_ptr, user, 63);
-			ln = strnlen(user, 64);
-			SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
-			SecurityBlob->UserName.BufferOffset =
-						cpu_to_le32(SecurityBlobLength);
-			bcc_ptr += ln;
-			SecurityBlobLength += ln;
-			SecurityBlob->UserName.Length = cpu_to_le16(ln);
-		}
-		/* BB fill in our workstation name if known BB */
-
-		strcpy(bcc_ptr, "Linux version ");
-		bcc_ptr += strlen("Linux version ");
-		strcpy(bcc_ptr, utsname()->release);
-		bcc_ptr += strlen(utsname()->release) + 1;
-		strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
-		bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
-		bcc_ptr++;	/* null domain */
-		*bcc_ptr = 0;
-	}
-	SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
-	pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
-	count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
-	smb_buffer->smb_buf_length += count;
-	pSMB->req.ByteCount = cpu_to_le16(count);
-
-	rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
-			 &bytes_returned, CIFS_LONG_OP);
-	if (rc) {
-/*   rc = map_smb_to_linux_error(smb_buffer_response) done in SendReceive now */
-	} else if ((smb_buffer_response->WordCount == 3) ||
-		   (smb_buffer_response->WordCount == 4)) {
-		__u16 action = le16_to_cpu(pSMBr->resp.Action);
-		__u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-		if (action & GUEST_LOGIN)
-			cFYI(1, ("Guest login")); /* BB Should we set anything
-							 in SesInfo struct ? */
-/*		if (SecurityBlob2->MessageType != NtLm??) {
-			cFYI("Unexpected message type on auth response is %d"));
-		} */
-
-		if (ses) {
-			cFYI(1,
-			     ("Check challenge UID %d vs auth response UID %d",
-			      ses->Suid, smb_buffer_response->Uid));
-			/* UID left in wire format */
-			ses->Suid = smb_buffer_response->Uid;
-			bcc_ptr = pByteArea(smb_buffer_response);
-		/* response can have either 3 or 4 word count - Samba sends 3 */
-			if ((pSMBr->resp.hdr.WordCount == 3)
-			    || ((pSMBr->resp.hdr.WordCount == 4)
-				&& (blob_len <
-				    pSMBr->resp.ByteCount))) {
-				if (pSMBr->resp.hdr.WordCount == 4) {
-					bcc_ptr +=
-					    blob_len;
-					cFYI(1,
-					     ("Security Blob Length %d ",
-					      blob_len));
-				}
-
-				cFYI(1,
-				     ("NTLMSSP response to Authenticate "));
-
-				if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
-					if ((long) (bcc_ptr) % 2) {
-						remaining_words =
-						    (BCC(smb_buffer_response)
-						     - 1) / 2;
-						bcc_ptr++;	/* Unicode strings must be word aligned */
-					} else {
-						remaining_words = BCC(smb_buffer_response) / 2;
-					}
-					len = UniStrnlen((wchar_t *) bcc_ptr,
-							remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
-  the end since (at least) WIN2K and Windows XP have a major bug in not null
-  terminating last Unicode string in response  */
-					kfree(ses->serverOS);
-					ses->serverOS =
-					    kzalloc(2 * (len + 1), GFP_KERNEL);
-					cifs_strfromUCS_le(ses->serverOS,
-							   (__le16 *)
-							   bcc_ptr, len,
-							   nls_codepage);
-					bcc_ptr += 2 * (len + 1);
-					remaining_words -= len + 1;
-					ses->serverOS[2 * len] = 0;
-					ses->serverOS[1 + (2 * len)] = 0;
-					if (remaining_words > 0) {
-						len = UniStrnlen((wchar_t *)
-								 bcc_ptr,
-								 remaining_words
-								 - 1);
-						kfree(ses->serverNOS);
-						ses->serverNOS =
-						    kzalloc(2 * (len + 1),
-							    GFP_KERNEL);
-						cifs_strfromUCS_le(ses->
-								   serverNOS,
-								   (__le16 *)
-								   bcc_ptr,
-								   len,
-								   nls_codepage);
-						bcc_ptr += 2 * (len + 1);
-						ses->serverNOS[2 * len] = 0;
-						ses->serverNOS[1+(2*len)] = 0;
-						remaining_words -= len + 1;
-						if (remaining_words > 0) {
-							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
-     /* last string not always null terminated (e.g. for Windows XP & 2000) */
-							kfree(ses->serverDomain);
-							ses->serverDomain =
-							    kzalloc(2 *
-								    (len +
-								     1),
-								    GFP_KERNEL);
-							cifs_strfromUCS_le
-							    (ses->
-							     serverDomain,
-							     (__le16 *)
-							     bcc_ptr, len,
-							     nls_codepage);
-							bcc_ptr +=
-							    2 * (len + 1);
-							ses->
-							    serverDomain[2
-									 * len]
-							    = 0;
-							ses->
-							    serverDomain[1
-									 +
-									 (2
-									  *
-									  len)]
-							    = 0;
-						} /* else no more room so create dummy domain string */
-						else {
-							kfree(ses->serverDomain);
-							ses->serverDomain = kzalloc(2,GFP_KERNEL);
-						}
-					} else {  /* no room so create dummy domain and NOS string */
-						kfree(ses->serverDomain);
-						ses->serverDomain = kzalloc(2, GFP_KERNEL);
-						kfree(ses->serverNOS);
-						ses->serverNOS = kzalloc(2, GFP_KERNEL);
-					}
-				} else {	/* ASCII */
-					len = strnlen(bcc_ptr, 1024);
-					if (((long) bcc_ptr + len) -
-					   (long) pByteArea(smb_buffer_response)
-						<= BCC(smb_buffer_response)) {
-						kfree(ses->serverOS);
-						ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
-						strncpy(ses->serverOS,bcc_ptr, len);
-
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;	/* null terminate the string */
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverNOS);
-						ses->serverNOS = kzalloc(len+1,
-								    GFP_KERNEL);
-						strncpy(ses->serverNOS,
-							bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-
-						len = strnlen(bcc_ptr, 1024);
-						kfree(ses->serverDomain);
-						ses->serverDomain =
-								kzalloc(len+1,
-								    GFP_KERNEL);
-						strncpy(ses->serverDomain,
-							bcc_ptr, len);
-						bcc_ptr += len;
-						bcc_ptr[0] = 0;
-						bcc_ptr++;
-					} else
-						cFYI(1, ("field of length %d "
-						   "extends beyond end of smb ",
-						      len));
-				}
-			} else {
-				cERROR(1, ("Security Blob extends beyond end "
-					"of SMB"));
-			}
-		} else {
-			cERROR(1, ("No session structure passed in."));
-		}
-	} else {
-		cERROR(1, ("Invalid Word count %d: ",
-			smb_buffer_response->WordCount));
-		rc = -EIO;
-	}
-
-	cifs_buf_release(smb_buffer);
-
-	return rc;
-}
-
 int
 CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	 const char *tree, struct cifsTconInfo *tcon,
-- 
cgit v1.2.3


From 341060273232a2df0d1a7fa53abc661fcf22747c Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Sat, 2 May 2009 04:59:34 +0000
Subject: [CIFS] remove cifs_strfromUCS_le

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifs_unicode.c | 29 -----------------------------
 fs/cifs/cifs_unicode.h |  1 -
 2 files changed, 30 deletions(-)

diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 6382720acf7..60e3c4253de 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -180,35 +180,6 @@ cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
 	return outlen;
 }
 
-/*
- * NAME:	cifs_strfromUCS()
- *
- * FUNCTION:	Convert little-endian unicode string to character string
- *
- */
-int
-cifs_strfromUCS_le(char *to, const __le16 *from,
-		   int len, const struct nls_table *codepage)
-{
-	int i;
-	int outlen = 0;
-
-	for (i = 0; (i < len) && from[i]; i++) {
-		int charlen;
-		/* 2.4.0 kernel or greater */
-		charlen =
-		    codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
-				       NLS_MAX_CHARSET_SIZE);
-		if (charlen > 0) {
-			outlen += charlen;
-		} else {
-			to[outlen++] = '?';
-		}
-	}
-	to[outlen] = 0;
-	return outlen;
-}
-
 /*
  * NAME:	cifs_strtoUCS()
  *
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 1570a701bf3..650638275a6 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -76,7 +76,6 @@ int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
 		   const struct nls_table *codepage, bool mapchar);
 int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
 		    const struct nls_table *codepage);
-int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
 int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
 char *cifs_strndup_from_ucs(const char *src, const int maxlen,
 			    const bool is_unicode,
-- 
cgit v1.2.3


From afe48c31ea5c74eaac58621ce1c85ae8187c4383 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 05:25:46 +0000
Subject: [CIFS] Fix final user of old string conversion code

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 80 ++++++++++++++++++++++++++-----------------------------
 1 file changed, 38 insertions(+), 42 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index b968e5bd7df..0ac32bd336d 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2564,7 +2564,6 @@ validate_ntransact(char *buf, char **ppparm, char **ppdata,
 	*pparmlen = parm_count;
 	return 0;
 }
-#endif /* CIFS_EXPERIMENTAL */
 
 int
 CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
@@ -2611,59 +2610,55 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 	} else {		/* decode response */
 		__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
 		__u32 data_count = le32_to_cpu(pSMBr->DataCount);
-		if ((pSMBr->ByteCount < 2) || (data_offset > 512))
+		if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
 		/* BB also check enough total bytes returned */
 			rc = -EIO;	/* bad smb */
-		else {
-			if (data_count && (data_count < 2048)) {
-				char *end_of_smb = 2 /* sizeof byte count */ +
-						pSMBr->ByteCount +
-						(char *)&pSMBr->ByteCount;
+			goto qreparse_out;
+		}
+		if (data_count && (data_count < 2048)) {
+			char *end_of_smb = 2 /* sizeof byte count */ +
+				pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
 
-				struct reparse_data *reparse_buf =
+			struct reparse_data *reparse_buf =
 						(struct reparse_data *)
 						((char *)&pSMBr->hdr.Protocol
 								 + data_offset);
-				if ((char *)reparse_buf >= end_of_smb) {
-					rc = -EIO;
-					goto qreparse_out;
-				}
-				if ((reparse_buf->LinkNamesBuf +
-					reparse_buf->TargetNameOffset +
-					reparse_buf->TargetNameLen) >
-						end_of_smb) {
-					cFYI(1, ("reparse buf beyond SMB"));
-					rc = -EIO;
-					goto qreparse_out;
-				}
+			if ((char *)reparse_buf >= end_of_smb) {
+				rc = -EIO;
+				goto qreparse_out;
+			}
+			if ((reparse_buf->LinkNamesBuf +
+				reparse_buf->TargetNameOffset +
+				reparse_buf->TargetNameLen) > end_of_smb) {
+				cFYI(1, ("reparse buf beyond SMB"));
+				rc = -EIO;
+				goto qreparse_out;
+			}
 
-				if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
-					name_len = UniStrnlen((wchar_t *)
+			if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
+				cifs_from_ucs2(symlinkinfo, (__le16 *)
 						(reparse_buf->LinkNamesBuf +
 						reparse_buf->TargetNameOffset),
-						min(buflen/2,
-						reparse_buf->TargetNameLen / 2));
-					cifs_strfromUCS_le(symlinkinfo,
-						(__le16 *) (reparse_buf->LinkNamesBuf +
-						reparse_buf->TargetNameOffset),
-						name_len, nls_codepage);
-				} else { /* ASCII names */
-					strncpy(symlinkinfo,
-						reparse_buf->LinkNamesBuf +
-						reparse_buf->TargetNameOffset,
-						min_t(const int, buflen,
-						   reparse_buf->TargetNameLen));
-				}
-			} else {
-				rc = -EIO;
-				cFYI(1, ("Invalid return data count on "
-					 "get reparse info ioctl"));
+						buflen,
+						reparse_buf->TargetNameLen,
+						nls_codepage, 0);
+			} else { /* ASCII names */
+				strncpy(symlinkinfo,
+					reparse_buf->LinkNamesBuf +
+					reparse_buf->TargetNameOffset,
+					min_t(const int, buflen,
+					   reparse_buf->TargetNameLen));
 			}
-			symlinkinfo[buflen] = 0; /* just in case so the caller
-					does not go off the end of the buffer */
-			cFYI(1, ("readlink result - %s", symlinkinfo));
+		} else {
+			rc = -EIO;
+			cFYI(1, ("Invalid return data count on "
+				 "get reparse info ioctl"));
 		}
+		symlinkinfo[buflen] = 0; /* just in case so the caller
+					does not go off the end of the buffer */
+		cFYI(1, ("readlink result - %s", symlinkinfo));
 	}
+	
 qreparse_out:
 	cifs_buf_release(pSMB);
 
@@ -2672,6 +2667,7 @@ qreparse_out:
 
 	return rc;
 }
+#endif /* CIFS_EXPERIMENTAL */
 
 #ifdef CONFIG_CIFS_POSIX
 
-- 
cgit v1.2.3


From 989c7e512f4dc976b10803ab0c449bdaaf3eaabd Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 05:32:20 +0000
Subject: [CIFS] remove checkpatch warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 0ac32bd336d..259f633ca59 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2658,7 +2658,7 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 					does not go off the end of the buffer */
 		cFYI(1, ("readlink result - %s", symlinkinfo));
 	}
-	
+
 qreparse_out:
 	cifs_buf_release(pSMB);
 
-- 
cgit v1.2.3


From 24d35add2bd09a427cacb7a39e14f3e47ed4d766 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Sat, 2 May 2009 05:40:39 +0000
Subject: [CIFS] Remove sparse warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 259f633ca59..4e10efd2432 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2573,7 +2573,6 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 {
 	int rc = 0;
 	int bytes_returned;
-	int name_len;
 	struct smb_com_transaction_ioctl_req *pSMB;
 	struct smb_com_transaction_ioctl_rsp *pSMBr;
 
-- 
cgit v1.2.3


From 21515e46bc6a6279dd13f6c01898ada9720100a3 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Wed, 29 Apr 2009 14:14:00 -0500
Subject: svcrdma: clean up error paths.

These fixes resolved crashes due to resource leak BUG_ON checks. The
resource leaks were detected by introducing asynchronous transport errors.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 net/sunrpc/xprtrdma/svc_rdma_sendto.c    | 3 +++
 net/sunrpc/xprtrdma/svc_rdma_transport.c | 3 ++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 6c26a675435..8b510c5e877 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -183,6 +183,7 @@ static int fast_reg_xdr(struct svcxprt_rdma *xprt,
 
  fatal_err:
 	printk("svcrdma: Error fast registering memory for xprt %p\n", xprt);
+	vec->frmr = NULL;
 	svc_rdma_put_frmr(xprt, frmr);
 	return -EIO;
 }
@@ -516,6 +517,7 @@ static int send_reply(struct svcxprt_rdma *rdma,
 		       "svcrdma: could not post a receive buffer, err=%d."
 		       "Closing transport %p.\n", ret, rdma);
 		set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+		svc_rdma_put_frmr(rdma, vec->frmr);
 		svc_rdma_put_context(ctxt, 0);
 		return -ENOTCONN;
 	}
@@ -606,6 +608,7 @@ static int send_reply(struct svcxprt_rdma *rdma,
 	return 0;
 
  err:
+	svc_rdma_unmap_dma(ctxt);
 	svc_rdma_put_frmr(rdma, vec->frmr);
 	svc_rdma_put_context(ctxt, 1);
 	return -EIO;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 3d810e7df3f..4b0c2fa15e0 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -520,8 +520,9 @@ int svc_rdma_post_recv(struct svcxprt_rdma *xprt)
 	svc_xprt_get(&xprt->sc_xprt);
 	ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
 	if (ret) {
-		svc_xprt_put(&xprt->sc_xprt);
+		svc_rdma_unmap_dma(ctxt);
 		svc_rdma_put_context(ctxt, 1);
+		svc_xprt_put(&xprt->sc_xprt);
 	}
 	return ret;
 
-- 
cgit v1.2.3


From ccecee1e5e42981f5eb37f4411e8552b9db04d30 Mon Sep 17 00:00:00 2001
From: Andy Adamson <andros@netapp.com>
Date: Fri, 1 May 2009 11:33:53 -0400
Subject: nfsd41: slots are freed with session

The session and slots are allocated all in one piece.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 fs/nfsd/nfs4state.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index c65a27b76a9..3b711f5147a 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -580,7 +580,6 @@ free_session(struct kref *kref)
 		struct nfsd4_cache_entry *e = &ses->se_slots[i].sl_cache_entry;
 		nfsd4_release_respages(e->ce_respages, e->ce_resused);
 	}
-	kfree(ses->se_slots);
 	kfree(ses);
 }
 
-- 
cgit v1.2.3


From d10db3a07e38bfb1bff92c790072d85b0bcc07eb Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 23 Apr 2009 16:27:39 +0200
Subject: i2c-pxa.c: timeouts off by 1

With `while (timeout--)' timeout reaches -1 after the loop, so the tests
below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-pxa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index c1405c8f6ba..acc7143d965 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -265,10 +265,10 @@ static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
 		show_state(i2c);
 	}
 
-	if (timeout <= 0)
+	if (timeout < 0)
 		show_state(i2c);
 
-	return timeout <= 0 ? I2C_RETRY : 0;
+	return timeout < 0 ? I2C_RETRY : 0;
 }
 
 static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
@@ -612,7 +612,7 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
 		show_state(i2c);
 	}
 
-	if (timeout <= 0) {
+	if (timeout < 0) {
 		show_state(i2c);
 		dev_err(&i2c->adap.dev,
 			"i2c_pxa: timeout waiting for bus free\n");
-- 
cgit v1.2.3


From 0b3cc858003b79b6c66ad79415ead907cbe4074e Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Mon, 4 May 2009 08:37:12 +0000
Subject: [CIFS] NTLMSSP reenabled after move from connect.c to sess.c

The NTLMSSP code was removed from fs/cifs/connect.c and merged
(75% smaller, cleaner) into fs/cifs/sess.c

As with the old code it requires that cifs be built with
CONFIG_CIFS_EXPERIMENTAL, the /proc/fs/cifs/Experimental flag
must be set to 2, and mount must turn on extended security
(e.g. with sec=krb5).

Although NTLMSSP encapsulated in SPNEGO is not enabled yet,
"raw" ntlmssp is common and useful in some cases since it
offers more complete security negotiation, and is the
default way of negotiating security for many Windows systems.
SPNEGO encapsulated NTLMSSP will be able to reuse the same
code.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES |   3 +-
 fs/cifs/sess.c  | 252 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 251 insertions(+), 4 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 43f2e0d061f..f20c4069c22 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -8,7 +8,8 @@ accurately mark string length before allocating memory (which may help the
 rare cases where a UTF-8 string is much larger than the UCS2 string that
 we converted from).  Fix endianness of the vcnum field used during
 session setup to distinguish multiple mounts to same server from different
-userids.
+userids. Raw NTLMSSP fixed (it requires /proc/fs/cifs/experimental
+flag to be set to 2, and mount must enable krb5 to turn on extended security).
  
 Version 1.57
 ------------
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index b2bdc2a3383..e68744e169b 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -378,6 +378,186 @@ static int decode_ascii_ssetup(char **pbcc_area, int bleft,
 	return rc;
 }
 
+static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
+				    struct cifsSesInfo *ses)
+{
+	CHALLENGE_MESSAGE *pblob = (CHALLENGE_MESSAGE *)bcc_ptr;
+
+	if (blob_len < sizeof(CHALLENGE_MESSAGE)) {
+		cERROR(1, ("challenge blob len %d too small", blob_len));
+		return -EINVAL;
+	}
+
+	if (memcmp(pblob->Signature, "NTLMSSP", 8)) {
+		cERROR(1, ("blob signature incorrect %s", pblob->Signature));
+		return -EINVAL;
+	}
+	if (pblob->MessageType != NtLmChallenge) {
+		cERROR(1, ("Incorrect message type %d", pblob->MessageType));
+		return -EINVAL;
+	}
+
+	memcpy(ses->server->cryptKey, pblob->Challenge, CIFS_CRYPTO_KEY_SIZE);
+	/* BB we could decode pblob->NegotiateFlags; some may be useful */
+	/* In particular we can examine sign flags */
+	/* BB spec says that if AvId field of MsvAvTimestamp is populated then
+		we must set the MIC field of the AUTHENTICATE_MESSAGE */
+
+	return 0;
+}
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+/* BB Move to ntlmssp.c eventually */
+
+/* We do not malloc the blob, it is passed in pbuffer, because
+   it is fixed size, and small, making this approach cleaner */
+static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
+					 struct cifsSesInfo *ses)
+{
+	NEGOTIATE_MESSAGE *sec_blob = (NEGOTIATE_MESSAGE *)pbuffer;
+	__u32 flags;
+
+	memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+	sec_blob->MessageType = NtLmNegotiate;
+
+	/* BB is NTLMV2 session security format easier to use here? */
+	flags = NTLMSSP_NEGOTIATE_56 |	NTLMSSP_REQUEST_TARGET |
+		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+		NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+	if (ses->server->secMode &
+	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+		flags |= NTLMSSP_NEGOTIATE_SIGN;
+	if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+		flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+	sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+	sec_blob->WorkstationName.BufferOffset = 0;
+	sec_blob->WorkstationName.Length = 0;
+	sec_blob->WorkstationName.MaximumLength = 0;
+
+	/* Domain name is sent on the Challenge not Negotiate NTLMSSP request */
+	sec_blob->DomainName.BufferOffset = 0;
+	sec_blob->DomainName.Length = 0;
+	sec_blob->DomainName.MaximumLength = 0;
+}
+
+/* We do not malloc the blob, it is passed in pbuffer, because its
+   maximum possible size is fixed and small, making this approach cleaner.
+   This function returns the length of the data in the blob */
+static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
+				   struct cifsSesInfo *ses,
+				   const struct nls_table *nls_cp, int first)
+{
+	AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer;
+	__u32 flags;
+	unsigned char *tmp;
+	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
+
+	memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+	sec_blob->MessageType = NtLmAuthenticate;
+
+	flags = NTLMSSP_NEGOTIATE_56 |
+		NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO |
+		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+		NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+	if (ses->server->secMode &
+	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+		flags |= NTLMSSP_NEGOTIATE_SIGN;
+	if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+		flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+	tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
+	sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+	sec_blob->LmChallengeResponse.BufferOffset =
+				cpu_to_le32(sizeof(AUTHENTICATE_MESSAGE));
+	sec_blob->LmChallengeResponse.Length = 0;
+	sec_blob->LmChallengeResponse.MaximumLength = 0;
+
+	/* calculate session key,  BB what about adding similar ntlmv2 path? */
+	SMBNTencrypt(ses->password, ses->server->cryptKey, ntlm_session_key);
+	if (first)
+		cifs_calculate_mac_key(&ses->server->mac_signing_key,
+				       ntlm_session_key, ses->password);
+
+	memcpy(tmp, ntlm_session_key, CIFS_SESS_KEY_SIZE);
+	sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->NtChallengeResponse.Length = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+	sec_blob->NtChallengeResponse.MaximumLength =
+				cpu_to_le16(CIFS_SESS_KEY_SIZE);
+
+	tmp += CIFS_SESS_KEY_SIZE;
+
+	if (ses->domainName == NULL) {
+		sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->DomainName.Length = 0;
+		sec_blob->DomainName.MaximumLength = 0;
+		tmp += 2;
+	} else {
+		int len;
+		len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
+				    MAX_USERNAME_SIZE, nls_cp);
+		len *= 2; /* unicode is 2 bytes each */
+		len += 2; /* trailing null */
+		sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->DomainName.Length = cpu_to_le16(len);
+		sec_blob->DomainName.MaximumLength = cpu_to_le16(len);
+		tmp += len;
+	}
+
+	if (ses->userName == NULL) {
+		sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->UserName.Length = 0;
+		sec_blob->UserName.MaximumLength = 0;
+		tmp += 2;
+	} else {
+		int len;
+		len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
+				    MAX_USERNAME_SIZE, nls_cp);
+		len *= 2; /* unicode is 2 bytes each */
+		len += 2; /* trailing null */
+		sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+		sec_blob->UserName.Length = cpu_to_le16(len);
+		sec_blob->UserName.MaximumLength = cpu_to_le16(len);
+		tmp += len;
+	}
+
+	sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->WorkstationName.Length = 0;
+	sec_blob->WorkstationName.MaximumLength = 0;
+	tmp += 2;
+
+	sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->SessionKey.Length = 0;
+	sec_blob->SessionKey.MaximumLength = 0;
+	return tmp - pbuffer;
+}
+
+
+static void setup_ntlmssp_neg_req(SESSION_SETUP_ANDX *pSMB,
+				 struct cifsSesInfo *ses)
+{
+	build_ntlmssp_negotiate_blob(&pSMB->req.SecurityBlob[0], ses);
+	pSMB->req.SecurityBlobLength = cpu_to_le16(sizeof(NEGOTIATE_MESSAGE));
+
+	return;
+}
+
+static int setup_ntlmssp_auth_req(SESSION_SETUP_ANDX *pSMB,
+				  struct cifsSesInfo *ses,
+				  const struct nls_table *nls, int first_time)
+{
+	int bloblen;
+
+	bloblen = build_ntlmssp_auth_blob(&pSMB->req.SecurityBlob[0], ses, nls,
+					  first_time);
+	pSMB->req.SecurityBlobLength = cpu_to_le16(bloblen);
+
+	return bloblen;
+}
+#endif
+
 int
 CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 		const struct nls_table *nls_cp)
@@ -396,6 +576,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	__u16 action;
 	int bytes_remaining;
 	struct key *spnego_key = NULL;
+	__le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
 
 	if (ses == NULL)
 		return -EINVAL;
@@ -403,6 +584,10 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	type = ses->server->secType;
 
 	cFYI(1, ("sess setup type %d", type));
+ssetup_ntlmssp_authenticate:
+	if (phase == NtLmChallenge)
+		phase = NtLmAuthenticate; /* if ntlmssp, now final phase */
+
 	if (type == LANMAN) {
 #ifndef CONFIG_CIFS_WEAK_PW_HASH
 		/* LANMAN and plaintext are less secure and off by default.
@@ -616,9 +801,49 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 		goto ssetup_exit;
 #endif /* CONFIG_CIFS_UPCALL */
 	} else {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+		if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+			if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
+				cERROR(1, ("NTLMSSP requires Unicode support"));
+				rc = -ENOSYS;
+				goto ssetup_exit;
+			}
+
+			cFYI(1, ("ntlmssp session setup phase %d", phase));
+			pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
+			capabilities |= CAP_EXTENDED_SECURITY;
+			pSMB->req.Capabilities |= cpu_to_le32(capabilities);
+			if (phase == NtLmNegotiate) {
+				setup_ntlmssp_neg_req(pSMB, ses);
+				iov[1].iov_len = sizeof(NEGOTIATE_MESSAGE);
+			} else if (phase == NtLmAuthenticate) {
+				int blob_len;
+				blob_len = setup_ntlmssp_auth_req(pSMB, ses,
+								  nls_cp,
+								  first_time);
+				iov[1].iov_len = blob_len;
+			} else {
+				cERROR(1, ("invalid phase %d", phase));
+				rc = -ENOSYS;
+				goto ssetup_exit;
+			}
+			iov[1].iov_base = &pSMB->req.SecurityBlob[0];
+			/* unicode strings must be word aligned */
+			if ((iov[0].iov_len + iov[1].iov_len) % 2) {
+				*bcc_ptr = 0;
+				bcc_ptr++;
+			}
+			unicode_oslm_strings(&bcc_ptr, nls_cp);
+		} else {
+			cERROR(1, ("secType %d not supported!", type));
+			rc = -ENOSYS;
+			goto ssetup_exit;
+		}
+#else
 		cERROR(1, ("secType %d not supported!", type));
 		rc = -ENOSYS;
 		goto ssetup_exit;
+#endif
 	}
 
 	iov[2].iov_base = str_area;
@@ -634,12 +859,23 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	/* SMB request buf freed in SendReceive2 */
 
 	cFYI(1, ("ssetup rc from sendrecv2 is %d", rc));
-	if (rc)
-		goto ssetup_exit;
 
 	pSMB = (SESSION_SETUP_ANDX *)iov[0].iov_base;
 	smb_buf = (struct smb_hdr *)iov[0].iov_base;
 
+	if ((type == RawNTLMSSP) && (smb_buf->Status.CifsError ==
+			cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))) {
+		if (phase != NtLmNegotiate) {
+			cERROR(1, ("Unexpected more processing error"));
+			goto ssetup_exit;
+		}
+		/* NTLMSSP Negotiate sent now processing challenge (response) */
+		phase = NtLmChallenge; /* process ntlmssp challenge */
+		rc = 0; /* MORE_PROC rc is not an error here, but expected */
+	}
+	if (rc)
+		goto ssetup_exit;
+
 	if ((smb_buf->WordCount != 3) && (smb_buf->WordCount != 4)) {
 		rc = -EIO;
 		cERROR(1, ("bad word count %d", smb_buf->WordCount));
@@ -658,12 +894,18 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 	if (smb_buf->WordCount == 4) {
 		__u16 blob_len;
 		blob_len = le16_to_cpu(pSMB->resp.SecurityBlobLength);
-		bcc_ptr += blob_len;
 		if (blob_len > bytes_remaining) {
 			cERROR(1, ("bad security blob length %d", blob_len));
 			rc = -EINVAL;
 			goto ssetup_exit;
 		}
+		if (phase == NtLmChallenge) {
+			rc = decode_ntlmssp_challenge(bcc_ptr, blob_len, ses);
+			/* now goto beginning for ntlmssp authenticate phase */
+			if (rc)
+				goto ssetup_exit;
+		}
+		bcc_ptr += blob_len;
 		bytes_remaining -= blob_len;
 	}
 
@@ -692,5 +934,9 @@ ssetup_exit:
 	} else if (resp_buf_type == CIFS_LARGE_BUFFER)
 		cifs_buf_release(iov[0].iov_base);
 
+	/* if ntlmssp, and negotiate succeeded, proceed to authenticate phase */
+	if ((phase == NtLmChallenge) && (rc == 0))
+		goto ssetup_ntlmssp_authenticate;
+
 	return rc;
 }
-- 
cgit v1.2.3


From 3ee59f8d0dcab2e114546038b2b224776c82b7f7 Mon Sep 17 00:00:00 2001
From: Andreas Schwab <schwab@linux-m68k.org>
Date: Thu, 30 Apr 2009 09:58:50 +0200
Subject: iwlwifi: remove EXPORT_SYMBOL for static symbol

It does not make sense to apply EXPORT_SYMBOL to a static symbol.  Fixes
this build error:

drivers/net/wireless/iwlwifi/iwl3945-base.c:1697: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 70a00c8ee42..4cce6613350 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1744,7 +1744,6 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx
 	rxq->bd = NULL;
 	rxq->rb_stts  = NULL;
 }
-EXPORT_SYMBOL(iwl3945_rx_queue_free);
 
 
 /* Convert linear signal-to-noise ratio into dB */
-- 
cgit v1.2.3


From 8ccd8f21122dcc30a665516d43aa8b4aa8ae51f6 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 29 Apr 2009 23:35:56 +0200
Subject: mac80211: correct fragmentation threshold check

The fragmentation threshold is defined to be including the
FCS, and the code that sets the TX_FRAGMENTED flag correctly
accounts for those four bytes. The code that verifies this
doesn't though, which could lead to spurious warnings and
frames being dropped although everything is ok. Correct the
code by accounting for the FCS.

(JWL -- The problem is described here:
 http://article.gmane.org/gmane.linux.kernel.wireless.general/32205 )

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 3fb04a86444..63656266d56 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -772,7 +772,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
 
 	/* internal error, why is TX_FRAGMENTED set? */
-	if (WARN_ON(skb->len <= frag_threshold))
+	if (WARN_ON(skb->len + FCS_LEN <= frag_threshold))
 		return TX_DROP;
 
 	/*
-- 
cgit v1.2.3


From c0f0aac05fa84b37ed46db8cf6c8bee9a67bbcca Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Thu, 30 Apr 2009 20:09:56 +0200
Subject: cfg80211: fix truncated IEs

Another bug in the "cfg80211: do not replace BSS structs" patch,
a forgotten length update leads to bogus data being stored and
passed to userspace, often truncated.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/scan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 2ae65b39b52..1f260c40b6c 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -395,6 +395,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 					memcpy(ies, res->pub.information_elements, ielen);
 					found->ies_allocated = true;
 					found->pub.information_elements = ies;
+					found->pub.len_information_elements = ielen;
 				}
 			}
 		}
-- 
cgit v1.2.3


From 299f5462087f3bc2141e6bc83ba7e2b15d8a07d2 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Thu, 30 Apr 2009 13:56:31 -0700
Subject: iwlwifi: update key flags at time key is set

We need to be symmetrical in what is done when key is set and cleared.
This is important wrt the key flags as they are used during key
clearing and if they are not set when the key is set the key cannot be
cleared completely.

This addresses the many occurences of the WARN found in
iwl_set_tkip_dynamic_key_info() and tracked in
http://www.kerneloops.org/searchweek.php?search=iwl_set_dynamic_key

If calling iwl_set_tkip_dynamic_key_info()/iwl_remove_dynamic_key()
pair a few times in a row will cause that we run out of key space.
This is because the index stored in the key flags is used by
iwl_remove_dynamic_key() to decide if it should remove the key.
Unfortunately the key flags, and hence the key index is currently only
set at the time the key is written to the device (in
iwl_update_tkip_key()) and _not_ in iwl_set_tkip_dynamic_key_info().
Fix this by setting flags in iwl_set_tkip_dynamic_key_info().

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-sta.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 5798fe49c77..44ab03a12e4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -719,6 +719,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
 {
 	unsigned long flags;
 	int ret = 0;
+	__le16 key_flags = 0;
+
+	key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
+	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+	key_flags &= ~STA_KEY_FLG_INVALID;
+
+	if (sta_id == priv->hw_params.bcast_sta_id)
+		key_flags |= STA_KEY_MULTICAST_MSK;
 
 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
@@ -738,6 +746,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
 	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
 		"no space for a new key");
 
+	priv->stations[sta_id].sta.key.key_flags = key_flags;
+
+
 	/* This copy is acutally not needed: we get the key with each TX */
 	memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
 
@@ -754,9 +765,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
 {
 	u8 sta_id = IWL_INVALID_STATION;
 	unsigned long flags;
-	__le16 key_flags = 0;
 	int i;
-	DECLARE_MAC_BUF(mac);
 
 	sta_id = iwl_find_station(priv, addr);
 	if (sta_id == IWL_INVALID_STATION) {
@@ -771,16 +780,8 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
 		return;
 	}
 
-	key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
-	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
-	key_flags &= ~STA_KEY_FLG_INVALID;
-
-	if (sta_id == priv->hw_params.bcast_sta_id)
-		key_flags |= STA_KEY_MULTICAST_MSK;
-
 	spin_lock_irqsave(&priv->sta_lock, flags);
 
-	priv->stations[sta_id].sta.key.key_flags = key_flags;
 	priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
 
 	for (i = 0; i < 5; i++)
-- 
cgit v1.2.3


From ac46d48e00349c63650b3cc6f9460fcc183da6a6 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Fri, 1 May 2009 18:44:50 -0400
Subject: cfg80211: fix race condition with wiphy_apply_custom_regulatory()

We forgot to lock using the cfg80211_mutex in
wiphy_apply_custom_regulatory(). Without the lock
there is possible race between processing a reply from CRDA
and a driver calling wiphy_apply_custom_regulatory(). During
the processing of the reply from CRDA we free last_request and
wiphy_apply_custom_regulatory() eventually accesses an
element from last_request in the through freq_reg_info_regd().

This is very difficult to reproduce (I haven't), it takes us
3 hours and you need to be banging hard, but the race is obvious
by looking at the code.

This should only affect those who use this caller, which currently
is ath5k, ath9k, and ar9170.

EIP: 0060:[<f8ebec50>] EFLAGS: 00210282 CPU: 1
EIP is at freq_reg_info_regd+0x24/0x121 [cfg80211]
EAX: 00000000 EBX: f7ca0060 ECX: f5183d94 EDX: 0024cde0
ESI: f8f56edc EDI: 00000000 EBP: 00000000 ESP: f5183d44
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 14617, ti=f5182000 task=f3934d10 task.ti=f5182000)
Stack: c0505300 f7ca0ab4 f5183d94 0024cde0 f8f403a6 f8f63160 f7ca0060 00000000
00000000 f8ebedf8 f5183d90 f8f56edc 00000000 00000004 00000f40 f8f56edc
f7ca0060 f7ca1234 00000000 00000000 00000000 f7ca14f0 f7ca0ab4 f7ca1289
Call Trace:
[<f8ebedf8>] wiphy_apply_custom_regulatory+0x8f/0x122 [cfg80211]
[<f8f3f798>] ath_attach+0x707/0x9e6 [ath9k]
[<f8f45e46>] ath_pci_probe+0x18d/0x29a [ath9k]
[<c023c7ba>] pci_device_probe+0xa3/0xe4
[<c02a860b>] really_probe+0xd7/0x1de
[<c02a87e7>] __driver_attach+0x37/0x55
[<c02a7eed>] bus_for_each_dev+0x31/0x57
[<c02a83bd>] driver_attach+0x16/0x18
[<c02a78e6>] bus_add_driver+0xec/0x21b
[<c02a8959>] driver_register+0x85/0xe2
[<c023c9bb>] __pci_register_driver+0x3c/0x69
[<f8e93043>] ath9k_init+0x43/0x68 [ath9k]
[<c010112b>] _stext+0x3b/0x116
[<c014a872>] sys_init_module+0x8a/0x19e
[<c01049ad>] sysenter_do_call+0x12/0x21
[<ffffe430>] 0xffffe430
=======================
Code: 0f 94 c0 c3 31 c0 c3 55 57 56 53 89 c3 83 ec 14 8b 74 24 2c 89 54 24 0c 89 4c 24 08 85 f6 75
06 8b 35 c8 bb ec f8 a1 cc bb ec f8 <8b> 40 04 83 f8 03 74 3a 48 74 37 8b 43 28 85 c0 74 30 89 c6
8b
EIP: [<f8ebec50>] freq_reg_info_regd+0x24/0x121 [cfg80211] SS:ESP 0068:f5183d44

Cc: stable@kernel.org
Reported-by: Nataraj Sadasivam <Nataraj.Sadasivam@Atheros.com>
Reported-by: Vivek Natarajan <Vivek.Natarajan@Atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/reg.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6c1993d9990..3a734949769 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -907,6 +907,7 @@ EXPORT_SYMBOL(freq_reg_info);
 int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
 			 const struct ieee80211_reg_rule **reg_rule)
 {
+	assert_cfg80211_lock();
 	return freq_reg_info_regd(wiphy, center_freq,
 		bandwidth, reg_rule, NULL);
 }
@@ -1176,6 +1177,8 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *chan;
 
+	assert_cfg80211_lock();
+
 	sband = wiphy->bands[band];
 	BUG_ON(chan_idx >= sband->n_channels);
 	chan = &sband->channels[chan_idx];
@@ -1214,10 +1217,13 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
 				   const struct ieee80211_regdomain *regd)
 {
 	enum ieee80211_band band;
+
+	mutex_lock(&cfg80211_mutex);
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		if (wiphy->bands[band])
 			handle_band_custom(wiphy, band, regd);
 	}
+	mutex_unlock(&cfg80211_mutex);
 }
 EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
 
-- 
cgit v1.2.3


From b1ed8ddd21a2d7acf8efbb60a112ea5c9f914159 Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Sat, 2 May 2009 00:34:15 -0400
Subject: cfg80211: fix bug while trying to process beacon hints on init

During initialization we would not have received any beacons
so skip processing reg beacon hints, also adds a check to
reg_is_world_roaming() for last_request before accessing its
fields.

This should fix this:

BUG: unable to handle kernel NULL pointer dereference at

IP: [<e0171332>] wiphy_update_regulatory+0x20f/0x295

*pdpt = 0000000008bf1001 *pde = 0000000000000000
Oops: 0000 [#1]
last sysfs file: /sys/class/backlight/eeepc/brightness
Modules linked in: ath5k(+) mac80211 led_class cfg80211
go_bit cfbcopyarea cfbimgblt cfbfillrect ipv6
ydev usual_tables(P) snd_hda_codec_realtek snd_hda_intel
nd_hwdep uhci_hcd snd_pcm_oss snd_mixer_oss i2c_i801
e serio_raw i2c_core pcspkr atl2 snd_pcm intel_agp
re agpgart eeepc_laptop snd_page_alloc ac video backlight
rfkill button processor evdev thermal fan ata_generic

Pid: 2909, comm: modprobe Tainted: Pc #112) 701
EIP: 0060:[<e0171332>] EFLAGS: 00010246 CPU: 0
EIP is at wiphy_update_regulatory+0x20f/0x295 [cfg80211]
EAX: 00000000 EBX: c5da0000 ECX: 00000000 EDX: c5da0060
ESI: 0000001a EDI: c5da0060 EBP: df3bdd70 ESP: df3bdd40
 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process modprobe (pid: 2909, ti=df3bc000 task=c5d030000)
Stack:
 df3bdd90 c5da0060 c04277e0 00000001 00000044 c04277e402
 00000002 c5da0000 0000001a c5da0060 df3bdda8 e01706a2 02
 00000282 000080d0 00000068 c5d53500 00000080 0000028240
Call Trace:
 [<e01706a2>] ? wiphy_register+0x122/0x1b7 [cfg80211]
 [<e0328e02>] ? ieee80211_register_hw+0xd8/0x346
 [<e06a7c9f>] ? ath5k_hw_set_bssid_mask+0x71/0x78 [ath5k]
 [<e06b0c52>] ? ath5k_pci_probe+0xa5c/0xd0a [ath5k]
 [<c01a6037>] ? sysfs_find_dirent+0x16/0x27
 [<c01fec95>] ? local_pci_probe+0xe/0x10
 [<c01ff526>] ? pci_device_probe+0x48/0x66
 [<c024c9fd>] ? driver_probe_device+0x7f/0xf2
 [<c024cab3>] ? __driver_attach+0x43/0x5f
 [<c024c0af>] ? bus_for_each_dev+0x39/0x5a
 [<c024c8d0>] ? driver_attach+0x14/0x16
 [<c024ca70>] ? __driver_attach+0x0/0x5f
 [<c024c5b3>] ? bus_add_driver+0xd7/0x1e7
 [<c024ccb9>] ? driver_register+0x7b/0xd7
 [<c01ff827>] ? __pci_register_driver+0x32/0x85
 [<e00a8018>] ? init_ath5k_pci+0x18/0x30 [ath5k]
 [<c0101131>] ? _stext+0x49/0x10b
 [<e00a8000>] ? init_ath5k_pci+0x0/0x30 [ath5k]
 [<c012f452>] ? __blocking_notifier_call_chain+0x40/0x4c
 [<c013a714>] ? sys_init_module+0x87/0x18b
 [<c0102804>] ? sysenter_do_call+0x12/0x22
Code: b8 da 17 e0 83 c0 04 e8 92 f9 ff ff 84 c0 75 2a 8b
85 c0 74 0c 83 c0 04 e8 7c f9 ff ff 84 c0 75 14 a1 bc da
4 03 74 66 8b 4d d4 80 79 08 00 74 5d a1 e0 d2 17 e0 48
EIP: [<e0171332>] wiphy_update_regulatory+0x20f/0x295
SP 0068:df3bdd40
CR2: 0000000000000004
---[ end trace 830f2dd2a95fd1a8 ]---

This issue is hard to reproduce, but it was noticed and discussed on
this thread:

http://marc.info/?t=123938022700005&r=1&w=2

Cc: stable@kernel.org
Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/reg.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 3a734949769..974b127aea6 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1134,7 +1134,8 @@ static bool reg_is_world_roaming(struct wiphy *wiphy)
 	if (is_world_regdom(cfg80211_regdomain->alpha2) ||
 	    (wiphy->regd && is_world_regdom(wiphy->regd->alpha2)))
 		return true;
-	if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+	if (last_request &&
+	    last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
 	    wiphy->custom_regulatory)
 		return true;
 	return false;
@@ -1143,6 +1144,12 @@ static bool reg_is_world_roaming(struct wiphy *wiphy)
 /* Reap the advantages of previously found beacons */
 static void reg_process_beacons(struct wiphy *wiphy)
 {
+	/*
+	 * Means we are just firing up cfg80211, so no beacons would
+	 * have been processed yet.
+	 */
+	if (!last_request)
+		return;
 	if (!reg_is_world_roaming(wiphy))
 		return;
 	wiphy_update_beacon_reg(wiphy);
-- 
cgit v1.2.3


From 30a548c727514484b08ac06edf0a7eb0f7fd70bf Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Sat, 2 May 2009 01:17:27 -0400
Subject: cfg80211: fix comment on regulatory hint processing

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/reg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 974b127aea6..08265ca1578 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1436,7 +1436,7 @@ new_request:
 	return call_crda(last_request->alpha2);
 }
 
-/* This currently only processes user and driver regulatory hints */
+/* This processes *all* regulatory hints */
 static void reg_process_hint(struct regulatory_request *reg_request)
 {
 	int r = 0;
-- 
cgit v1.2.3


From 8e532175277d9a5eae49768ed086555081f741a7 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 4 May 2009 18:04:55 +0200
Subject: mac80211: minstrel, fix memory corruption

minstrel doesn't count max rate count in fact, since it doesn't use
a loop variable `i' and hence allocs space only for bitrates found in
the first band.

Fix it by involving the `i' as an index so that it traverses all the
bands now and finds the real max bitrate count.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/rc80211_minstrel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 3824990d340..70df3dcc3cf 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -476,7 +476,7 @@ minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
 		return NULL;
 
 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
-		sband = hw->wiphy->bands[hw->conf.channel->band];
+		sband = hw->wiphy->bands[i];
 		if (sband->n_bitrates > max_rates)
 			max_rates = sband->n_bitrates;
 	}
-- 
cgit v1.2.3


From 6909268dc93ae4b0b8e1ebb4b2fa70b1a47dd347 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 4 May 2009 18:10:28 +0200
Subject: mac80211: pid, fix memory corruption

pid doesn't count with some band having more bitrates than the one
associated the first time.
Fix that by counting the maximal available bitrate count and allocate
big enough space.

Secondly, fix touching uninitialized memory which causes panics.
Index sucked from this random memory points to the hell.
The fix is to sort the rates on each band change.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/rc80211_pid_algo.c | 73 ++++++++++++++++++++++-------------------
 1 file changed, 39 insertions(+), 34 deletions(-)

diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index b16801cde06..01d59a8e334 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -317,13 +317,44 @@ rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband,
 			   struct ieee80211_sta *sta, void *priv_sta)
 {
 	struct rc_pid_sta_info *spinfo = priv_sta;
+	struct rc_pid_info *pinfo = priv;
+	struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
 	struct sta_info *si;
+	int i, j, tmp;
+	bool s;
 
 	/* TODO: This routine should consider using RSSI from previous packets
 	 * as we need to have IEEE 802.1X auth succeed immediately after assoc..
 	 * Until that method is implemented, we will use the lowest supported
 	 * rate as a workaround. */
 
+	/* Sort the rates. This is optimized for the most common case (i.e.
+	 * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
+	 * mapping too. */
+	for (i = 0; i < sband->n_bitrates; i++) {
+		rinfo[i].index = i;
+		rinfo[i].rev_index = i;
+		if (RC_PID_FAST_START)
+			rinfo[i].diff = 0;
+		else
+			rinfo[i].diff = i * pinfo->norm_offset;
+	}
+	for (i = 1; i < sband->n_bitrates; i++) {
+		s = 0;
+		for (j = 0; j < sband->n_bitrates - i; j++)
+			if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
+				     sband->bitrates[rinfo[j + 1].index].bitrate)) {
+				tmp = rinfo[j].index;
+				rinfo[j].index = rinfo[j + 1].index;
+				rinfo[j + 1].index = tmp;
+				rinfo[rinfo[j].index].rev_index = j;
+				rinfo[rinfo[j + 1].index].rev_index = j + 1;
+				s = 1;
+			}
+		if (!s)
+			break;
+	}
+
 	spinfo->txrate_idx = rate_lowest_index(sband, sta);
 	/* HACK */
 	si = container_of(sta, struct sta_info, sta);
@@ -336,21 +367,22 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
 	struct rc_pid_info *pinfo;
 	struct rc_pid_rateinfo *rinfo;
 	struct ieee80211_supported_band *sband;
-	int i, j, tmp;
-	bool s;
+	int i, max_rates = 0;
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct rc_pid_debugfs_entries *de;
 #endif
 
-	sband = hw->wiphy->bands[hw->conf.channel->band];
-
 	pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
 	if (!pinfo)
 		return NULL;
 
-	/* We can safely assume that sband won't change unless we get
-	 * reinitialized. */
-	rinfo = kmalloc(sizeof(*rinfo) * sband->n_bitrates, GFP_ATOMIC);
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+		sband = hw->wiphy->bands[i];
+		if (sband->n_bitrates > max_rates)
+			max_rates = sband->n_bitrates;
+	}
+
+	rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC);
 	if (!rinfo) {
 		kfree(pinfo);
 		return NULL;
@@ -368,33 +400,6 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
 	pinfo->rinfo = rinfo;
 	pinfo->oldrate = 0;
 
-	/* Sort the rates. This is optimized for the most common case (i.e.
-	 * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
-	 * mapping too. */
-	for (i = 0; i < sband->n_bitrates; i++) {
-		rinfo[i].index = i;
-		rinfo[i].rev_index = i;
-		if (RC_PID_FAST_START)
-			rinfo[i].diff = 0;
-		else
-			rinfo[i].diff = i * pinfo->norm_offset;
-	}
-	for (i = 1; i < sband->n_bitrates; i++) {
-		s = 0;
-		for (j = 0; j < sband->n_bitrates - i; j++)
-			if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
-				     sband->bitrates[rinfo[j + 1].index].bitrate)) {
-				tmp = rinfo[j].index;
-				rinfo[j].index = rinfo[j + 1].index;
-				rinfo[j + 1].index = tmp;
-				rinfo[rinfo[j].index].rev_index = j;
-				rinfo[rinfo[j + 1].index].rev_index = j + 1;
-				s = 1;
-			}
-		if (!s)
-			break;
-	}
-
 #ifdef CONFIG_MAC80211_DEBUGFS
 	de = &pinfo->dentries;
 	de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR,
-- 
cgit v1.2.3


From 97a775c49c7e1b47b016a492463486a5b86da479 Mon Sep 17 00:00:00 2001
From: Jinyoung Park <parkjy@mtekvision.com>
Date: Fri, 1 May 2009 12:54:31 +0100
Subject: ASoC: Fix errors in WM8990

The mis-typing exist in dapm controller definitions and dapm route definitions,
so happen mis-matched error when snd_soc_dapm_add_routes().

Cc: stable@kernel.org
Signed-off-by: Jinyoung Park <parkjy@mtekvision.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com
---
 sound/soc/codecs/wm8990.c | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index c518c3e5aa3..40cd274eb1e 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -729,7 +729,7 @@ SND_SOC_DAPM_MIXER_E("INMIXL", WM8990_INTDRIVBITS, WM8990_INMIXL_PWR_BIT, 0,
 	inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
 /* AINLMUX */
-SND_SOC_DAPM_MUX_E("AILNMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINLMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
 	&wm8990_dapm_ainlmux_controls, inmixer_event,
 	SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
@@ -740,7 +740,7 @@ SND_SOC_DAPM_MIXER_E("INMIXR", WM8990_INTDRIVBITS, WM8990_INMIXR_PWR_BIT, 0,
 	inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
 /* AINRMUX */
-SND_SOC_DAPM_MUX_E("AIRNMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINRMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
 	&wm8990_dapm_ainrmux_controls, inmixer_event,
 	SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 
@@ -848,40 +848,40 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"LIN12 PGA", "LIN2 Switch", "LIN2"},
 	/* LIN34 PGA */
 	{"LIN34 PGA", "LIN3 Switch", "LIN3"},
-	{"LIN34 PGA", "LIN4 Switch", "LIN4"},
+	{"LIN34 PGA", "LIN4 Switch", "LIN4/RXN"},
 	/* INMIXL */
 	{"INMIXL", "Record Left Volume", "LOMIX"},
 	{"INMIXL", "LIN2 Volume", "LIN2"},
 	{"INMIXL", "LINPGA12 Switch", "LIN12 PGA"},
 	{"INMIXL", "LINPGA34 Switch", "LIN34 PGA"},
-	/* AILNMUX */
-	{"AILNMUX", "INMIXL Mix", "INMIXL"},
-	{"AILNMUX", "DIFFINL Mix", "LIN12PGA"},
-	{"AILNMUX", "DIFFINL Mix", "LIN34PGA"},
-	{"AILNMUX", "RXVOICE Mix", "LIN4/RXN"},
-	{"AILNMUX", "RXVOICE Mix", "RIN4/RXP"},
+	/* AINLMUX */
+	{"AINLMUX", "INMIXL Mix", "INMIXL"},
+	{"AINLMUX", "DIFFINL Mix", "LIN12 PGA"},
+	{"AINLMUX", "DIFFINL Mix", "LIN34 PGA"},
+	{"AINLMUX", "RXVOICE Mix", "LIN4/RXN"},
+	{"AINLMUX", "RXVOICE Mix", "RIN4/RXP"},
 	/* ADC */
-	{"Left ADC", NULL, "AILNMUX"},
+	{"Left ADC", NULL, "AINLMUX"},
 
 	/* RIN12 PGA */
 	{"RIN12 PGA", "RIN1 Switch", "RIN1"},
 	{"RIN12 PGA", "RIN2 Switch", "RIN2"},
 	/* RIN34 PGA */
 	{"RIN34 PGA", "RIN3 Switch", "RIN3"},
-	{"RIN34 PGA", "RIN4 Switch", "RIN4"},
+	{"RIN34 PGA", "RIN4 Switch", "RIN4/RXP"},
 	/* INMIXL */
 	{"INMIXR", "Record Right Volume", "ROMIX"},
 	{"INMIXR", "RIN2 Volume", "RIN2"},
 	{"INMIXR", "RINPGA12 Switch", "RIN12 PGA"},
 	{"INMIXR", "RINPGA34 Switch", "RIN34 PGA"},
-	/* AIRNMUX */
-	{"AIRNMUX", "INMIXR Mix", "INMIXR"},
-	{"AIRNMUX", "DIFFINR Mix", "RIN12PGA"},
-	{"AIRNMUX", "DIFFINR Mix", "RIN34PGA"},
-	{"AIRNMUX", "RXVOICE Mix", "RIN4/RXN"},
-	{"AIRNMUX", "RXVOICE Mix", "RIN4/RXP"},
+	/* AINRMUX */
+	{"AINRMUX", "INMIXR Mix", "INMIXR"},
+	{"AINRMUX", "DIFFINR Mix", "RIN12 PGA"},
+	{"AINRMUX", "DIFFINR Mix", "RIN34 PGA"},
+	{"AINRMUX", "RXVOICE Mix", "LIN4/RXN"},
+	{"AINRMUX", "RXVOICE Mix", "RIN4/RXP"},
 	/* ADC */
-	{"Right ADC", NULL, "AIRNMUX"},
+	{"Right ADC", NULL, "AINRMUX"},
 
 	/* LOMIX */
 	{"LOMIX", "LOMIX RIN3 Bypass Switch", "RIN3"},
@@ -922,7 +922,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	{"LOPMIX", "LOPMIX Left Mixer PGA Switch", "LOPGA"},
 
 	/* OUT3MIX */
-	{"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXP"},
+	{"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXN"},
 	{"OUT3MIX", "OUT3MIX Left Out PGA Switch", "LOPGA"},
 
 	/* OUT4MIX */
@@ -949,7 +949,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	/* Output Pins */
 	{"LON", NULL, "LONMIX"},
 	{"LOP", NULL, "LOPMIX"},
-	{"OUT", NULL, "OUT3MIX"},
+	{"OUT3", NULL, "OUT3MIX"},
 	{"LOUT", NULL, "LOUT PGA"},
 	{"SPKN", NULL, "SPKMIX"},
 	{"ROUT", NULL, "ROUT PGA"},
-- 
cgit v1.2.3


From a7ca7fccacc029958fd09985e7f3529b90ec791d Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Tue, 5 May 2009 14:31:12 +0200
Subject: netfilter: add missing linux/types.h include to xt_LED.h

Pointed out by Dave Miller:

  CHECK   include/linux/netfilter (57 files)
/home/davem/src/GIT/net-2.6/usr/include/linux/netfilter/xt_LED.h:6: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter/xt_LED.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/netfilter/xt_LED.h b/include/linux/netfilter/xt_LED.h
index 4c91a0d770d..f5509e7524d 100644
--- a/include/linux/netfilter/xt_LED.h
+++ b/include/linux/netfilter/xt_LED.h
@@ -1,6 +1,8 @@
 #ifndef _XT_LED_H
 #define _XT_LED_H
 
+#include <linux/types.h>
+
 struct xt_led_info {
 	char id[27];        /* Unique ID for this trigger in the LED class */
 	__u8 always_blink;  /* Blink even if the LED is already on */
-- 
cgit v1.2.3


From b98b4947cb79d670fceca0e951c092eea93e9baa Mon Sep 17 00:00:00 2001
From: Christoph Paasch <christoph.paasch@gmail.com>
Date: Tue, 5 May 2009 15:32:16 +0200
Subject: netfilter: ip6t_ipv6header: fix match on packets ending with
 NEXTHDR_NONE

As packets ending with NEXTHDR_NONE don't have a last extension header,
the check for the length needs to be after the check for NEXTHDR_NONE.

Signed-off-by: Christoph Paasch <christoph.paasch@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/ipv6/netfilter/ip6t_ipv6header.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/netfilter/ip6t_ipv6header.c b/net/ipv6/netfilter/ip6t_ipv6header.c
index 14e6724d567..91490ad9302 100644
--- a/net/ipv6/netfilter/ip6t_ipv6header.c
+++ b/net/ipv6/netfilter/ip6t_ipv6header.c
@@ -50,14 +50,14 @@ ipv6header_mt6(const struct sk_buff *skb, const struct xt_match_param *par)
 		struct ipv6_opt_hdr _hdr;
 		int hdrlen;
 
-		/* Is there enough space for the next ext header? */
-		if (len < (int)sizeof(struct ipv6_opt_hdr))
-			return false;
 		/* No more exthdr -> evaluate */
 		if (nexthdr == NEXTHDR_NONE) {
 			temp |= MASK_NONE;
 			break;
 		}
+		/* Is there enough space for the next ext header? */
+		if (len < (int)sizeof(struct ipv6_opt_hdr))
+			return false;
 		/* ESP -> evaluate */
 		if (nexthdr == NEXTHDR_ESP) {
 			temp |= MASK_ESP;
-- 
cgit v1.2.3


From bd0185ceaca7ef17d5c9c094882a5aabe8eff677 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Tue, 5 May 2009 15:39:39 +0200
Subject: sound: serial-u16550: fix buffer overflow

Remove most of the serial port parameters from the card longname string
because it was way too long and overflowed into the mixername string.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/drivers/serial-u16550.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index b2b6d50c942..a25fb7b1f44 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -963,16 +963,11 @@ static int __devinit snd_serial_probe(struct platform_device *devptr)
 	if (err < 0)
 		goto _err;
 
-	sprintf(card->longname, "%s at 0x%lx, irq %d speed %d div %d outs %d ins %d adaptor %s droponfull %d",
+	sprintf(card->longname, "%s [%s] at %#lx, irq %d",
 		card->shortname,
-		uart->base,
-		uart->irq,
-		uart->speed,
-		(int)uart->divisor,
-		outs[dev],
-		ins[dev],
 		adaptor_names[uart->adaptor],
-		uart->drop_on_full);
+		uart->base,
+		uart->irq);
 
 	snd_card_set_dev(card, &devptr->dev);
 
-- 
cgit v1.2.3


From b452e08e73c0e3dbb0be82130217be4b7084299e Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Tue, 5 May 2009 15:40:12 +0200
Subject: sound: via82xx: fix DXS volume range

With 5 bits and 1.5 dB per step, the DXS volume range is only 48 dB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/via82xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 809b233dd4a..1ef58c51c21 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -1687,7 +1687,7 @@ static int snd_via8233_pcmdxs_volume_put(struct snd_kcontrol *kcontrol,
 	return change;
 }
 
-static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -9450, 150, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -4650, 150, 1);
 
 static struct snd_kcontrol_new snd_via8233_pcmdxs_volume_control __devinitdata = {
 	.name = "PCM Playback Volume",
-- 
cgit v1.2.3


From 280f37afa2c270ff029cb420b34396aa002909c3 Mon Sep 17 00:00:00 2001
From: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue, 5 May 2009 17:46:07 +0200
Subject: netfilter: xt_cluster: fix use of cluster match with 32 nodes

This patch fixes a problem when you use 32 nodes in the cluster
match:

% iptables -I PREROUTING -t mangle -i eth0 -m cluster \
  --cluster-total-nodes  32  --cluster-local-node  32 \
  --cluster-hash-seed 0xdeadbeef -j MARK --set-mark 0xffff
iptables: Invalid argument. Run `dmesg' for more information.
% dmesg | tail -1
xt_cluster: this node mask cannot be higher than the total number of nodes

The problem is related to this checking:

if (info->node_mask >= (1 << info->total_nodes)) {
	printk(KERN_ERR "xt_cluster: this node mask cannot be "
			"higher than the total number of nodes\n");
	return false;
}

(1 << 32) is 1. Thus, the checking fails.

BTW, I said this before but I insist: I have only tested the cluster
match with 2 nodes getting ~45% extra performance in an active-active setup.
The maximum limit of 32 nodes is still completely arbitrary. I'd really
appreciate if people that have more nodes in their setups let me know.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 include/linux/netfilter/xt_cluster.h | 2 ++
 net/netfilter/xt_cluster.c           | 8 +++++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/include/linux/netfilter/xt_cluster.h b/include/linux/netfilter/xt_cluster.h
index 5e0a0d07b52..886682656f0 100644
--- a/include/linux/netfilter/xt_cluster.h
+++ b/include/linux/netfilter/xt_cluster.h
@@ -12,4 +12,6 @@ struct xt_cluster_match_info {
 	u_int32_t		flags;
 };
 
+#define XT_CLUSTER_NODES_MAX	32
+
 #endif /* _XT_CLUSTER_MATCH_H */
diff --git a/net/netfilter/xt_cluster.c b/net/netfilter/xt_cluster.c
index 6c4847662b8..69a639f3540 100644
--- a/net/netfilter/xt_cluster.c
+++ b/net/netfilter/xt_cluster.c
@@ -135,7 +135,13 @@ static bool xt_cluster_mt_checkentry(const struct xt_mtchk_param *par)
 {
 	struct xt_cluster_match_info *info = par->matchinfo;
 
-	if (info->node_mask >= (1 << info->total_nodes)) {
+	if (info->total_nodes > XT_CLUSTER_NODES_MAX) {
+		printk(KERN_ERR "xt_cluster: you have exceeded the maximum "
+				"number of cluster nodes (%u > %u)\n",
+				info->total_nodes, XT_CLUSTER_NODES_MAX);
+		return false;
+	}
+	if (info->node_mask >= (1ULL << info->total_nodes)) {
 		printk(KERN_ERR "xt_cluster: this node mask cannot be "
 				"higher than the total number of nodes\n");
 		return false;
-- 
cgit v1.2.3


From fecc1133b66af6e0cd49115a248f34bbb01f180a Mon Sep 17 00:00:00 2001
From: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue, 5 May 2009 17:48:26 +0200
Subject: netfilter: ctnetlink: fix wrong message type in user updates

This patch fixes the wrong message type that are triggered by
user updates, the following commands:

(term1)# conntrack -I -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state LISTEN
(term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_SENT
(term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_RECV

only trigger event message of type NEW, when only the first is NEW
while others should be UPDATE.

(term2)# conntrack -E
    [NEW] tcp      6 10 LISTEN src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0
    [NEW] tcp      6 10 SYN_SENT src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0
    [NEW] tcp      6 10 SYN_RECV src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0

This patch also removes IPCT_REFRESH from the bitmask since it is
not of any use.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/netfilter/nf_conntrack_netlink.c | 48 +++++++++++++++---------------------
 1 file changed, 20 insertions(+), 28 deletions(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 0ea36e0c8a0..fd77619256a 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1186,28 +1186,6 @@ ctnetlink_change_conntrack(struct nf_conn *ct, struct nlattr *cda[])
 	return 0;
 }
 
-static inline void
-ctnetlink_event_report(struct nf_conn *ct, u32 pid, int report)
-{
-	unsigned int events = 0;
-
-	if (test_bit(IPS_EXPECTED_BIT, &ct->status))
-		events |= IPCT_RELATED;
-	else
-		events |= IPCT_NEW;
-
-	nf_conntrack_event_report(IPCT_STATUS |
-				  IPCT_HELPER |
-				  IPCT_REFRESH |
-				  IPCT_PROTOINFO |
-				  IPCT_NATSEQADJ |
-				  IPCT_MARK |
-				  events,
-				  ct,
-				  pid,
-				  report);
-}
-
 static struct nf_conn *
 ctnetlink_create_conntrack(struct nlattr *cda[],
 			   struct nf_conntrack_tuple *otuple,
@@ -1373,6 +1351,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		err = -ENOENT;
 		if (nlh->nlmsg_flags & NLM_F_CREATE) {
 			struct nf_conn *ct;
+			enum ip_conntrack_events events;
 
 			ct = ctnetlink_create_conntrack(cda, &otuple,
 							&rtuple, u3);
@@ -1383,9 +1362,18 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 			err = 0;
 			nf_conntrack_get(&ct->ct_general);
 			spin_unlock_bh(&nf_conntrack_lock);
-			ctnetlink_event_report(ct,
-					       NETLINK_CB(skb).pid,
-					       nlmsg_report(nlh));
+			if (test_bit(IPS_EXPECTED_BIT, &ct->status))
+				events = IPCT_RELATED;
+			else
+				events = IPCT_NEW;
+
+			nf_conntrack_event_report(IPCT_STATUS |
+						  IPCT_HELPER |
+						  IPCT_PROTOINFO |
+						  IPCT_NATSEQADJ |
+						  IPCT_MARK | events,
+						  ct, NETLINK_CB(skb).pid,
+						  nlmsg_report(nlh));
 			nf_ct_put(ct);
 		} else
 			spin_unlock_bh(&nf_conntrack_lock);
@@ -1404,9 +1392,13 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 		if (err == 0) {
 			nf_conntrack_get(&ct->ct_general);
 			spin_unlock_bh(&nf_conntrack_lock);
-			ctnetlink_event_report(ct,
-					       NETLINK_CB(skb).pid,
-					       nlmsg_report(nlh));
+			nf_conntrack_event_report(IPCT_STATUS |
+						  IPCT_HELPER |
+						  IPCT_PROTOINFO |
+						  IPCT_NATSEQADJ |
+						  IPCT_MARK,
+						  ct, NETLINK_CB(skb).pid,
+						  nlmsg_report(nlh));
 			nf_ct_put(ct);
 		} else
 			spin_unlock_bh(&nf_conntrack_lock);
-- 
cgit v1.2.3


From ca50a51e890b0a62b44b5642c1ba5049909e5a8b Mon Sep 17 00:00:00 2001
From: Ben Nizette <bn@niasdigital.com>
Date: Thu, 16 Apr 2009 05:54:12 +1000
Subject: ipu_idmac: Use disable_irq_nosync() from within irq handlers.

disable_irq() should wait for all running handlers to complete
before returning.  As such, if it's used to disable an interrupt
from that interrupt's handler it will deadlock.  This replaces
the dangerous instances with the _nosync() variant which doesn't
have this problem.

Note the 2 handlers in question are only used #ifdef DEBUG so
I imagine these code paths don't get hit often.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/ipu/ipu_idmac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index e202a6ce557..3a4deea78a7 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1547,7 +1547,7 @@ static irqreturn_t ic_sof_irq(int irq, void *dev_id)
 	struct idmac_channel *ichan = dev_id;
 	printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n",
 	       irq, ichan->dma_chan.chan_id);
-	disable_irq(irq);
+	disable_irq_nosync(irq);
 	return IRQ_HANDLED;
 }
 
@@ -1556,7 +1556,7 @@ static irqreturn_t ic_eof_irq(int irq, void *dev_id)
 	struct idmac_channel *ichan = dev_id;
 	printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n",
 	       irq, ichan->dma_chan.chan_id);
-	disable_irq(irq);
+	disable_irq_nosync(irq);
 	return IRQ_HANDLED;
 }
 
-- 
cgit v1.2.3


From 029091df01116aff8dea89ce96a0a2534401803a Mon Sep 17 00:00:00 2001
From: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Date: Thu, 30 Apr 2009 14:48:29 +0800
Subject: PCI: Fix pci-e port driver slot_reset bad default return value

When an upstream port reports an AER error to root port, kernel
starts error recovery procedures. The default return value of
function pcie_portdrv_slot_reset is PCI_ERS_RESULT_NONE. If all
port service drivers of the downstream port under the upstream
port have no slot_reset method in pci_error_handlers, AER recovery
would stop without resume. Below patch against 2.6.30-rc3 fixes it.

Signed-off-by: Zhang Yanmin <yanmin.zhang@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/pcie/aer/aerdrv.h  | 3 +++
 drivers/pci/pcie/portdrv_pci.c | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index c7ad68b6c6d..aa14482a477 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -95,6 +95,9 @@ struct aer_broadcast_data {
 static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
 		enum pci_ers_result new)
 {
+	if (new == PCI_ERS_RESULT_NONE)
+		return orig;
+
 	switch (orig) {
 	case PCI_ERS_RESULT_CAN_RECOVER:
 	case PCI_ERS_RESULT_RECOVERED:
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index b924e2463f8..091ce70051e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -200,7 +200,7 @@ static int slot_reset_iter(struct device *device, void *data)
 
 static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
 {
-	pci_ers_result_t status = PCI_ERS_RESULT_NONE;
+	pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
 	int retval;
 
 	/* If fatal, restore cfg space for possible link reset at upstream */
-- 
cgit v1.2.3


From 457ca7bb6bdf39d0832d3f88c65fa367a3b20de6 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Tue, 5 May 2009 13:09:01 -0700
Subject: Bluetooth: Move dev_set_name() to a context that can sleep

Setting the name of a sysfs device has to be done in a context that can
actually sleep. It allocates its memory with GFP_KERNEL. Previously it
was a static (size limited) string and that got changed to accommodate
longer device names. So move the dev_set_name() just before calling
device_add() which is executed in a work queue.

This fixes the following error:

[  110.012125] BUG: sleeping function called from invalid context at mm/slub.c:1595
[  110.012135] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper
[  110.012141] 2 locks held by swapper/0:
[  110.012145]  #0:  (hci_task_lock){++.-.+}, at: [<ffffffffa01f822f>] hci_rx_task+0x2f/0x2d0 [bluetooth]
[  110.012173]  #1:  (&hdev->lock){+.-.+.}, at: [<ffffffffa01fb9e2>] hci_event_packet+0x72/0x25c0 [bluetooth]
[  110.012198] Pid: 0, comm: swapper Tainted: G        W 2.6.30-rc4-g953cdaa #1
[  110.012203] Call Trace:
[  110.012207]  <IRQ>  [<ffffffff8023eabd>] __might_sleep+0x14d/0x170
[  110.012228]  [<ffffffff802cfbe1>] __kmalloc+0x111/0x170
[  110.012239]  [<ffffffff803c2094>] kvasprintf+0x64/0xb0
[  110.012248]  [<ffffffff803b7a5b>] kobject_set_name_vargs+0x3b/0xa0
[  110.012257]  [<ffffffff80465326>] dev_set_name+0x76/0xa0
[  110.012273]  [<ffffffffa01fb9e2>] ? hci_event_packet+0x72/0x25c0 [bluetooth]
[  110.012289]  [<ffffffffa01ffc1d>] hci_conn_add_sysfs+0x3d/0x70 [bluetooth]
[  110.012303]  [<ffffffffa01fba2c>] hci_event_packet+0xbc/0x25c0 [bluetooth]
[  110.012312]  [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0
[  110.012328]  [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth]
[  110.012343]  [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0
[  110.012347]  [<ffffffff805e88c5>] ? _read_unlock+0x75/0x80
[  110.012354]  [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth]
[  110.012360]  [<ffffffffa01f8403>] hci_rx_task+0x203/0x2d0 [bluetooth]
[  110.012365]  [<ffffffff80250ab5>] tasklet_action+0xb5/0x160
[  110.012369]  [<ffffffff8025116c>] __do_softirq+0x9c/0x150
[  110.012372]  [<ffffffff805e850f>] ? _spin_unlock+0x3f/0x80
[  110.012376]  [<ffffffff8020cbbc>] call_softirq+0x1c/0x30
[  110.012380]  [<ffffffff8020f01d>] do_softirq+0x8d/0xe0
[  110.012383]  [<ffffffff80250df5>] irq_exit+0xc5/0xe0
[  110.012386]  [<ffffffff8020e71d>] do_IRQ+0x9d/0x120
[  110.012389]  [<ffffffff8020c3d3>] ret_from_intr+0x0/0xf
[  110.012391]  <EOI>  [<ffffffff80431832>] ? acpi_idle_enter_bm+0x264/0x2a6
[  110.012399]  [<ffffffff80431828>] ? acpi_idle_enter_bm+0x25a/0x2a6
[  110.012403]  [<ffffffff804f50d5>] ? cpuidle_idle_call+0xc5/0x130
[  110.012407]  [<ffffffff8020a4b4>] ? cpu_idle+0xc4/0x130
[  110.012411]  [<ffffffff805d2268>] ? rest_init+0x88/0xb0
[  110.012416]  [<ffffffff807e2fbd>] ? start_kernel+0x3b5/0x412
[  110.012420]  [<ffffffff807e2281>] ? x86_64_start_reservations+0x91/0xb5
[  110.012424]  [<ffffffff807e2394>] ? x86_64_start_kernel+0xef/0x11b

Based on a report by Davide Pesavento <davidepesa@gmail.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Hugo Mildenberger <hugo.mildenberger@namir.de>
Tested-by: Bing Zhao <bzhao@marvell.com>
---
 net/bluetooth/hci_sysfs.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index 582d8877078..a05d45eb3ba 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -88,10 +88,13 @@ static struct device_type bt_link = {
 static void add_conn(struct work_struct *work)
 {
 	struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
+	struct hci_dev *hdev = conn->hdev;
 
 	/* ensure previous del is complete */
 	flush_work(&conn->work_del);
 
+	dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
+
 	if (device_add(&conn->dev) < 0) {
 		BT_ERR("Failed to register connection device");
 		return;
@@ -154,12 +157,8 @@ void hci_conn_init_sysfs(struct hci_conn *conn)
 
 void hci_conn_add_sysfs(struct hci_conn *conn)
 {
-	struct hci_dev *hdev = conn->hdev;
-
 	BT_DBG("conn %p", conn);
 
-	dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
-
 	queue_work(bt_workq, &conn->work_add);
 }
 
-- 
cgit v1.2.3


From 844823cb822932d2c599abf38692e3d6a5b5a320 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 6 May 2009 00:48:30 +0000
Subject: [CIFS] Fix SMB uid in NTLMSSP authenticate request

We were not setting the SMB uid in NTLMSSP authenticate
request which could lead to INVALID_PARAMETER error
on 2nd session setup.

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index e68744e169b..897a052270f 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -822,6 +822,10 @@ ssetup_ntlmssp_authenticate:
 								  nls_cp,
 								  first_time);
 				iov[1].iov_len = blob_len;
+				/* Make sure that we tell the server that we
+				   are using the uid that it just gave us back
+				   on the response (challenge) */
+				smb_buf->Uid = ses->Suid;
 			} else {
 				cERROR(1, ("invalid phase %d", phase));
 				rc = -ENOSYS;
-- 
cgit v1.2.3


From ac68392460ffefed13020967bae04edc4d3add06 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 6 May 2009 04:16:04 +0000
Subject: [CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp

On mount, "sec=ntlmssp" can now be specified to allow
"rawntlmssp" security to be enabled during
CIFS session establishment/authentication (ntlmssp used to
require specifying krb5 which was counterintuitive).

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/README     | 10 +++++++++-
 fs/cifs/cifsglob.h | 16 +++++++++-------
 fs/cifs/cifssmb.c  | 10 ++++++++++
 fs/cifs/connect.c  |  7 +++++++
 4 files changed, 35 insertions(+), 8 deletions(-)

diff --git a/fs/cifs/README b/fs/cifs/README
index 07434181623..db208ddb989 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -651,7 +651,15 @@ Experimental            When set to 1 used to enable certain experimental
 			signing turned on in case buffer was modified
 			just before it was sent, also this flag will
 			be used to use the new experimental directory change 
-			notification code).
+			notification code).  When set to 2 enables
+			an additional experimental feature, "raw ntlmssp"
+			session establishment support (which allows
+			specifying "sec=ntlmssp" on mount). The Linux cifs
+			module will use ntlmv2 authentication encapsulated
+			in "raw ntlmssp" (not using SPNEGO) when
+			"sec=ntlmssp" is specified on mount.
+			This support also requires building cifs with
+			the CONFIG_CIFS_EXPERIMENTAL configuration flag.
 
 These experimental features and tracing can be enabled by changing flags in 
 /proc/fs/cifs (after the cifs module has been installed or built into the 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index df40ab64cd9..a61ab772c6f 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -82,8 +82,8 @@ enum securityEnum {
 	LANMAN,			/* Legacy LANMAN auth */
 	NTLM,			/* Legacy NTLM012 auth with NTLM hash */
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
-	RawNTLMSSP,		/* NTLMSSP without SPNEGO */
-	NTLMSSP,		/* NTLMSSP via SPNEGO */
+	RawNTLMSSP,		/* NTLMSSP without SPNEGO, NTLMv2 hash */
+	NTLMSSP,		/* NTLMSSP via SPNEGO, NTLMv2 hash */
 	Kerberos,		/* Kerberos via SPNEGO */
 	MSKerberos,		/* MS Kerberos via SPNEGO */
 };
@@ -531,6 +531,7 @@ static inline void free_dfs_info_array(struct dfs_info3_param *param,
 #define   CIFSSEC_MAY_PLNTXT    0
 #endif /* weak passwords */
 #define   CIFSSEC_MAY_SEAL	0x00040 /* not supported yet */
+#define   CIFSSEC_MAY_NTLMSSP	0x00080 /* raw ntlmssp with ntlmv2 */
 
 #define   CIFSSEC_MUST_SIGN	0x01001
 /* note that only one of the following can be set so the
@@ -543,22 +544,23 @@ require use of the stronger protocol */
 #define   CIFSSEC_MUST_LANMAN	0x10010
 #define   CIFSSEC_MUST_PLNTXT	0x20020
 #ifdef CONFIG_CIFS_UPCALL
-#define   CIFSSEC_MASK          0x3F03F /* allows weak security but also krb5 */
+#define   CIFSSEC_MASK          0xAF0AF /* allows weak security but also krb5 */
 #else
-#define   CIFSSEC_MASK          0x37037 /* current flags supported if weak */
+#define   CIFSSEC_MASK          0xA70A7 /* current flags supported if weak */
 #endif /* UPCALL */
 #else /* do not allow weak pw hash */
 #ifdef CONFIG_CIFS_UPCALL
-#define   CIFSSEC_MASK          0x0F00F /* flags supported if no weak allowed */
+#define   CIFSSEC_MASK          0x8F08F /* flags supported if no weak allowed */
 #else
-#define	  CIFSSEC_MASK          0x07007 /* flags supported if no weak allowed */
+#define	  CIFSSEC_MASK          0x87087 /* flags supported if no weak allowed */
 #endif /* UPCALL */
 #endif /* WEAK_PW_HASH */
 #define   CIFSSEC_MUST_SEAL	0x40040 /* not supported yet */
+#define   CIFSSEC_MUST_NTLMSSP	0x80080 /* raw ntlmssp with ntlmv2 */
 
 #define   CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
 #define   CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
-#define   CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
+#define   CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5 | CIFSSEC_MAY_NTLMSSP)
 /*
  *****************************************************************
  * All constants go here
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 4e10efd2432..75e6623a863 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -449,6 +449,14 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 		cFYI(1, ("Kerberos only mechanism, enable extended security"));
 		pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
 	}
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+	else if ((secFlags & CIFSSEC_MUST_NTLMSSP) == CIFSSEC_MUST_NTLMSSP)
+		pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+	else if ((secFlags & CIFSSEC_AUTH_MASK) == CIFSSEC_MAY_NTLMSSP) {
+		cFYI(1, ("NTLMSSP only mechanism, enable extended security"));
+		pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+	}
+#endif
 
 	count = 0;
 	for (i = 0; i < CIFS_NUM_PROT; i++) {
@@ -585,6 +593,8 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 		server->secType = NTLMv2;
 	else if (secFlags & CIFSSEC_MAY_KRB5)
 		server->secType = Kerberos;
+	else if (secFlags & CIFSSEC_MAY_NTLMSSP)
+		server->secType = NTLMSSP;
 	else if (secFlags & CIFSSEC_MAY_LANMAN)
 		server->secType = LANMAN;
 /* #ifdef CONFIG_CIFS_EXPERIMENTAL
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 3a934dd8422..4aa81a507b7 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -979,6 +979,13 @@ cifs_parse_mount_options(char *options, const char *devname,
 				return 1;
 			} else if (strnicmp(value, "krb5", 4) == 0) {
 				vol->secFlg |= CIFSSEC_MAY_KRB5;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+			} else if (strnicmp(value, "ntlmsspi", 8) == 0) {
+				vol->secFlg |= CIFSSEC_MAY_NTLMSSP |
+					CIFSSEC_MUST_SIGN;
+			} else if (strnicmp(value, "ntlmssp", 7) == 0) {
+				vol->secFlg |= CIFSSEC_MAY_NTLMSSP;
+#endif
 			} else if (strnicmp(value, "ntlmv2i", 7) == 0) {
 				vol->secFlg |= CIFSSEC_MAY_NTLMV2 |
 					CIFSSEC_MUST_SIGN;
-- 
cgit v1.2.3


From 1eb5ac6466d4be7b15b38ce3ab709600f1bc891f Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Tue, 5 May 2009 19:13:44 +1000
Subject: mm: SLUB fix reclaim_state

SLUB does not correctly account reclaim_state.reclaimed_slab, so it will
break memory reclaim. Account it like SLAB does.

Cc: stable@kernel.org
Cc: linux-mm@kvack.org
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 mm/slub.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/mm/slub.c b/mm/slub.c
index 7ab54ecbd3f..aa34913a41e 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
 #include <linux/module.h>
 #include <linux/bit_spinlock.h>
 #include <linux/interrupt.h>
@@ -1170,6 +1171,8 @@ static void __free_slab(struct kmem_cache *s, struct page *page)
 
 	__ClearPageSlab(page);
 	reset_page_mapcount(page);
+	if (current->reclaim_state)
+		current->reclaim_state->reclaimed_slab += pages;
 	__free_pages(page, order);
 }
 
-- 
cgit v1.2.3


From 1f0532eb617d28f65c93593a1491f662f14f7eac Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Tue, 5 May 2009 19:13:45 +1000
Subject: mm: SLOB fix reclaim_state

SLOB does not correctly account reclaim_state.reclaimed_slab, so it will
break memory reclaim. Account it like SLAB does.

Cc: stable@kernel.org
Cc: linux-mm@kvack.org
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 mm/slob.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/mm/slob.c b/mm/slob.c
index a2d4ab32198..f92e66d558b 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -60,6 +60,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -255,6 +256,8 @@ static void *slob_new_pages(gfp_t gfp, int order, int node)
 
 static void slob_free_pages(void *b, int order)
 {
+	if (current->reclaim_state)
+		current->reclaim_state->reclaimed_slab += 1 << order;
 	free_pages((unsigned long)b, order);
 }
 
@@ -407,7 +410,7 @@ static void slob_free(void *block, int size)
 		spin_unlock_irqrestore(&slob_lock, flags);
 		clear_slob_page(sp);
 		free_slob_page(sp);
-		free_page((unsigned long)b);
+		slob_free_pages(b, 0);
 		return;
 	}
 
-- 
cgit v1.2.3


From 7eccf7b227b6d3b1745b937ce35efc9c27f9b0e5 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Tue, 5 May 2009 12:50:02 -0700
Subject: x86, srat: do not register nodes beyond e820 map

The mem= option will truncate the memory map at a specified address so
it's not possible to register nodes with memory beyond the e820 upper
bound.

unparse_node() is only called when then node had memory associated with
it, although with the mem= option it is no longer addressable.

[ Impact: fix boot hang on certain (large) systems ]

Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <alpine.DEB.2.00.0905051248150.20021@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_64.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 33c5fa57e43..01765955baa 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -361,6 +361,7 @@ static void __init unparse_node(int node)
 {
 	int i;
 	node_clear(node, nodes_parsed);
+	node_clear(node, cpu_nodes_parsed);
 	for (i = 0; i < MAX_LOCAL_APIC; i++) {
 		if (apicid_to_node[i] == node)
 			apicid_to_node[i] = NUMA_NO_NODE;
-- 
cgit v1.2.3


From e0e5ea3268db428d19e1c5fa00e6f583861cbdbd Mon Sep 17 00:00:00 2001
From: Nikanth Karthikesan <knikanth@suse.de>
Date: Mon, 4 May 2009 09:08:26 +0530
Subject: x86: Fix a typo in a printk message

[ Impact: printk message cleanup ]

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200905040908.27299.knikanth@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 16ae70fc57e..29a0e37114f 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -216,7 +216,7 @@ int __init get_memcfg_from_srat(void)
 
 	if (num_memory_chunks == 0) {
 		printk(KERN_WARNING
-			 "could not finy any ACPI SRAT memory areas.\n");
+			 "could not find any ACPI SRAT memory areas.\n");
 		goto out_fail;
 	}
 
-- 
cgit v1.2.3


From 35edb4003c9589c49602e29cee1e78d820a1388f Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Wed, 6 May 2009 09:06:04 +0200
Subject: ALSA: Release v1.0.20

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 include/sound/version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/sound/version.h b/include/sound/version.h
index a7e74e23ad2..456f1359e1c 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
 /* include/version.h */
-#define CONFIG_SND_VERSION "1.0.19"
+#define CONFIG_SND_VERSION "1.0.20"
 #define CONFIG_SND_DATE ""
-- 
cgit v1.2.3


From b2c0cea6b1cb210e962f07047df602875564069e Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@citi.umich.edu>
Date: Tue, 5 May 2009 19:04:29 -0400
Subject: nfsd4: check for negative dentry before use in nfsv4 readdir

After 2f9092e1020246168b1309b35e085ecd7ff9ff72 "Fix i_mutex vs.  readdir
handling in nfsd" (and 14f7dd63 "Copy XFS readdir hack into nfsd code"),
an entry may be removed between the first mutex_unlock and the second
mutex_lock. In this case, lookup_one_len() will return a negative
dentry.  Check for this case to avoid a NULL dereference.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Cc: stable@kernel.org
---
 fs/nfsd/nfs4xdr.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index b820c311931..b73549d293b 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2214,6 +2214,15 @@ nfsd4_encode_dirent_fattr(struct nfsd4_readdir *cd,
 	dentry = lookup_one_len(name, cd->rd_fhp->fh_dentry, namlen);
 	if (IS_ERR(dentry))
 		return nfserrno(PTR_ERR(dentry));
+	if (!dentry->d_inode) {
+		/*
+		 * nfsd_buffered_readdir drops the i_mutex between
+		 * readdir and calling this callback, leaving a window
+		 * where this directory entry could have gone away.
+		 */
+		dput(dentry);
+		return nfserr_noent;
+	}
 
 	exp_get(exp);
 	/*
@@ -2276,6 +2285,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 	struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);
 	int buflen;
 	__be32 *p = cd->buffer;
+	__be32 *cookiep;
 	__be32 nfserr = nfserr_toosmall;
 
 	/* In nfsv4, "." and ".." never make it onto the wire.. */
@@ -2292,7 +2302,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 		goto fail;
 
 	*p++ = xdr_one;                             /* mark entry present */
-	cd->offset = p;                             /* remember pointer */
+	cookiep = p;
 	p = xdr_encode_hyper(p, NFS_OFFSET_MAX);    /* offset of next entry */
 	p = xdr_encode_array(p, name, namlen);      /* name length & name */
 
@@ -2306,6 +2316,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 		goto fail;
 	case nfserr_dropit:
 		goto fail;
+	case nfserr_noent:
+		goto skip_entry;
 	default:
 		/*
 		 * If the client requested the RDATTR_ERROR attribute,
@@ -2324,6 +2336,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
 	}
 	cd->buflen -= (p - cd->buffer);
 	cd->buffer = p;
+	cd->offset = cookiep;
+skip_entry:
 	cd->common.err = nfs_ok;
 	return 0;
 fail:
-- 
cgit v1.2.3


From d1a2627a29667fe7c4a9d06e1579a2d65bd39bba Mon Sep 17 00:00:00 2001
From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Date: Mon, 30 Mar 2009 17:50:17 -0700
Subject: wimax: fix oops if netlink fails to add attribute

When sending a message to user space using wimax_msg(), if nla_put()
fails, correctly interpret the return code from wimax_msg_alloc() as
an err ptr and return the error code instead of crashing (as it is
assuming than non-NULL means the pointer is ok).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
---
 net/wimax/op-msg.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
index 5d149c1b5f0..9ad4d893a56 100644
--- a/net/wimax/op-msg.c
+++ b/net/wimax/op-msg.c
@@ -149,7 +149,8 @@ struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
 	}
 	result = nla_put(skb, WIMAX_GNL_MSG_DATA, size, msg);
 	if (result < 0) {
-		dev_err(dev, "no memory to add payload in attribute\n");
+		dev_err(dev, "no memory to add payload (msg %p size %zu) in "
+			"attribute: %d\n", msg, size, result);
 		goto error_nla_put;
 	}
 	genlmsg_end(skb, genl_msg);
@@ -299,10 +300,10 @@ int wimax_msg(struct wimax_dev *wimax_dev, const char *pipe_name,
 	struct sk_buff *skb;
 
 	skb = wimax_msg_alloc(wimax_dev, pipe_name, buf, size, gfp_flags);
-	if (skb == NULL)
-		goto error_msg_new;
-	result = wimax_msg_send(wimax_dev, skb);
-error_msg_new:
+	if (IS_ERR(skb))
+		result = PTR_ERR(skb);
+	else
+		result = wimax_msg_send(wimax_dev, skb);
 	return result;
 }
 EXPORT_SYMBOL_GPL(wimax_msg);
-- 
cgit v1.2.3


From 94c7f2d49521b0bb3ab91cbeb3518ac34355d47f Mon Sep 17 00:00:00 2001
From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Date: Sat, 2 May 2009 02:30:28 -0700
Subject: wimax: oops: wimax_dev_add() is the only one that can initialize the
 state

When a new wimax_dev is created, it's state has to be __WIMAX_ST_NULL
until wimax_dev_add() is succesfully called. This allows calls into
the stack that happen before said time to be rejected.

Until now, the state was being set (by mistake) to UNINITIALIZED,
which was allowing calls such as wimax_report_rfkill_hw() to go
through even when a call to wimax_dev_add() had failed; that was
causing an oops when touching uninitialized data.

This situation is normal when the device starts reporting state before
the whole initialization has been completed. It just has to be dealt
with.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
---
 net/wimax/stack.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index a0ee76b5251..933e1422b09 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -338,8 +338,21 @@ out:
  */
 void wimax_state_change(struct wimax_dev *wimax_dev, enum wimax_st new_state)
 {
+	/*
+	 * A driver cannot take the wimax_dev out of the
+	 * __WIMAX_ST_NULL state unless by calling wimax_dev_add(). If
+	 * the wimax_dev's state is still NULL, we ignore any request
+	 * to change its state because it means it hasn't been yet
+	 * registered.
+	 *
+	 * There is no need to complain about it, as routines that
+	 * call this might be shared from different code paths that
+	 * are called before or after wimax_dev_add() has done its
+	 * job.
+	 */
 	mutex_lock(&wimax_dev->mutex);
-	__wimax_state_change(wimax_dev, new_state);
+	if (wimax_dev->state > __WIMAX_ST_NULL)
+		__wimax_state_change(wimax_dev, new_state);
 	mutex_unlock(&wimax_dev->mutex);
 	return;
 }
@@ -376,7 +389,7 @@ EXPORT_SYMBOL_GPL(wimax_state_get);
 void wimax_dev_init(struct wimax_dev *wimax_dev)
 {
 	INIT_LIST_HEAD(&wimax_dev->id_table_node);
-	__wimax_state_set(wimax_dev, WIMAX_ST_UNINITIALIZED);
+	__wimax_state_set(wimax_dev, __WIMAX_ST_NULL);
 	mutex_init(&wimax_dev->mutex);
 	mutex_init(&wimax_dev->mutex_reset);
 }
-- 
cgit v1.2.3


From 89996df4b5b1a09c279f50b3fd03aa9df735f5cb Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@citi.umich.edu>
Date: Wed, 6 May 2009 16:32:54 -0400
Subject: lockd: fix list corruption on lockd restart

If lockd is signalled soon enough after restart then locks_start_grace()
will try to re-add an entry to a list and trigger a lock corruption
warning.

Thanks to Wang Chen for the problem report and diagnosis.

WARNING: at lib/list_debug.c:26 __list_add+0x27/0x5c()
...
list_add corruption. next->prev should be prev (ef8fe958), but was ef8ff128.  (next=ef8ff128).
...
Pid: 23062, comm: lockd Tainted: G        W  2.6.30-rc2 #3
Call Trace:
[<c042d5b5>] warn_slowpath+0x71/0xa0
[<c0422a96>] ? update_curr+0x11d/0x125
[<c044b12d>] ? trace_hardirqs_on_caller+0x18/0x150
[<c044b270>] ? trace_hardirqs_on+0xb/0xd
[<c051c61a>] ? _raw_spin_lock+0x53/0xfa
[<c051c89f>] __list_add+0x27/0x5c
[<ef8f6daa>] locks_start_grace+0x22/0x30 [lockd]
[<ef8f34da>] set_grace_period+0x39/0x53 [lockd]
[<c06b8921>] ? lock_kernel+0x1c/0x28
[<ef8f3558>] lockd+0x64/0x164 [lockd]
[<c044b12d>] ? trace_hardirqs_on_caller+0x18/0x150
[<c04227b0>] ? complete+0x34/0x3e
[<ef8f34f4>] ? lockd+0x0/0x164 [lockd]
[<ef8f34f4>] ? lockd+0x0/0x164 [lockd]
[<c043dd42>] kthread+0x45/0x6b
[<c043dcfd>] ? kthread+0x0/0x6b
[<c0403c23>] kernel_thread_helper+0x7/0x10

Reported-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: stable@kernel.org
---
 fs/lockd/svc.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index abf83881f68..1a54ae14a19 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -104,6 +104,16 @@ static void set_grace_period(void)
 	schedule_delayed_work(&grace_period_end, grace_period);
 }
 
+static void restart_grace(void)
+{
+	if (nlmsvc_ops) {
+		cancel_delayed_work_sync(&grace_period_end);
+		locks_end_grace(&lockd_manager);
+		nlmsvc_invalidate_all();
+		set_grace_period();
+	}
+}
+
 /*
  * This is the lockd kernel thread
  */
@@ -149,10 +159,7 @@ lockd(void *vrqstp)
 
 		if (signalled()) {
 			flush_signals(current);
-			if (nlmsvc_ops) {
-				nlmsvc_invalidate_all();
-				set_grace_period();
-			}
+			restart_grace();
 			continue;
 		}
 
-- 
cgit v1.2.3


From 77a22941f9ed052a0fdaa92753b1a1ab8072ee76 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Wed, 6 May 2009 16:43:48 -0700
Subject: igb: resolve panic on shutdown when SR-IOV is enabled

The setup_rctl call was making a call into the ring structure after it had
been freed.  This was causing a panic on shutdown.  This call wasn't
necessary since it is possible to get the needed index from
adapter->vfs_allocated_count.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/igb/igb_main.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 08c801490c7..e25343588fc 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2006,7 +2006,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl;
 	u32 srrctl = 0;
-	int i, j;
+	int i;
 
 	rctl = rd32(E1000_RCTL);
 
@@ -2071,8 +2071,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 	if (adapter->vfs_allocated_count) {
 		u32 vmolr;
 
-		j = adapter->rx_ring[0].reg_idx;
-
 		/* set all queue drop enable bits */
 		wr32(E1000_QDE, ALL_QUEUES);
 		srrctl |= E1000_SRRCTL_DROP_EN;
@@ -2080,16 +2078,16 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
 		/* disable queue 0 to prevent tail write w/o re-config */
 		wr32(E1000_RXDCTL(0), 0);
 
-		vmolr = rd32(E1000_VMOLR(j));
+		vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count));
 		if (rctl & E1000_RCTL_LPE)
 			vmolr |= E1000_VMOLR_LPE;
-		if (adapter->num_rx_queues > 0)
+		if (adapter->num_rx_queues > 1)
 			vmolr |= E1000_VMOLR_RSSE;
-		wr32(E1000_VMOLR(j), vmolr);
+		wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr);
 	}
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		j = adapter->rx_ring[i].reg_idx;
+		int j = adapter->rx_ring[i].reg_idx;
 		wr32(E1000_SRRCTL(j), srrctl);
 	}
 
-- 
cgit v1.2.3


From 6473990c7f0565fca2007f8662395d122e30f0d8 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Wed, 6 May 2009 16:45:07 -0700
Subject: net-sched: fix bfifo default limit

When no limit is given, the bfifo uses a default of tx_queue_len * mtu.
Packets handled by qdiscs include the link layer header, so this should
be taken into account, similar to what other qdiscs do.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_fifo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c
index 92cfc9d7e3b..69188e8358b 100644
--- a/net/sched/sch_fifo.c
+++ b/net/sched/sch_fifo.c
@@ -51,7 +51,7 @@ static int fifo_init(struct Qdisc *sch, struct nlattr *opt)
 		u32 limit = qdisc_dev(sch)->tx_queue_len ? : 1;
 
 		if (sch->ops == &bfifo_qdisc_ops)
-			limit *= qdisc_dev(sch)->mtu;
+			limit *= psched_mtu(qdisc_dev(sch));
 
 		q->limit = limit;
 	} else {
-- 
cgit v1.2.3


From 581daf7e00c5e766f26aff80a61a860a17b0d75a Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Wed, 6 May 2009 16:46:47 -0700
Subject: bnx2: Fix panic in bnx2_poll_work().

Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue:

http://bugzilla.kernel.org/show_bug.cgi?id=12698

This issue was reported by multiple i386 users.  Without barrier(),
the compiled code looks like the following where %eax contains the
address of the tx_cons or rx_cons in the DMA status block.  The
status block contents can change between the cmpb and the movzwl
instruction.  The driver would crash if the value was not 0xff during
the cmpb instruction, but changed to 0xff during the movzwl
instruction.

6828:	80 38 ff             	cmpb   $0xff,(%eax)
682b:	0f b7 10             	movzwl (%eax),%edx

With the added barrier(), the compiled code now looks correct:

683d:	0f b7 10             	movzwl (%eax),%edx
6840:	0f b6 c2             	movzbl %dl,%eax
6843:	3d ff 00 00 00       	cmp    $0xff,%eax

Thanks to Pascal de Bruijn <pmjdebruijn@pcode.nl> for reporting the
problem and Holger Noefer <hnoefer@pironet-ndh.com> for patiently
testing test patches for us.

Also updated version to 2.0.1.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d47839184a0..b0cb29d4cc0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -54,8 +54,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"2.0.0"
-#define DRV_MODULE_RELDATE	"April 2, 2009"
+#define DRV_MODULE_VERSION	"2.0.1"
+#define DRV_MODULE_RELDATE	"May 6, 2009"
 #define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-4.6.16.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-4.6.16.fw"
 #define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-4.6.17.fw"
@@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi)
 	/* Tell compiler that status block fields can change. */
 	barrier();
 	cons = *bnapi->hw_tx_cons_ptr;
+	barrier();
 	if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT))
 		cons++;
 	return cons;
@@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi)
 	/* Tell compiler that status block fields can change. */
 	barrier();
 	cons = *bnapi->hw_rx_cons_ptr;
+	barrier();
 	if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT))
 		cons++;
 	return cons;
-- 
cgit v1.2.3


From b805007545813d276c844f0f6d6c825b07c6aec6 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Wed, 6 May 2009 16:49:18 -0700
Subject: net: update skb_recycle_check() for hardware timestamping changes

Commit ac45f602ee3d1b6f326f68bc0c2591ceebf05ba4 ("net: infrastructure
for hardware time stamping") added two skb initialization actions to
__alloc_skb(), which need to be added to skb_recycle_check() as well.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/skbuff.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index f091a5a845c..d152394b261 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -502,7 +502,9 @@ int skb_recycle_check(struct sk_buff *skb, int skb_size)
 	shinfo->gso_segs = 0;
 	shinfo->gso_type = 0;
 	shinfo->ip6_frag_id = 0;
+	shinfo->tx_flags.flags = 0;
 	shinfo->frag_list = NULL;
+	memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps));
 
 	memset(skb, 0, offsetof(struct sk_buff, tail));
 	skb->data = skb->head + NET_SKB_PAD;
-- 
cgit v1.2.3


From 51991763416251f259efbfe459c16f331f31d01f Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 7 May 2009 15:24:31 -0400
Subject: ACPICA: use acpi.* modparam namespace

Add acpi/acpica/*.c to the acpi.* modparam namespace
so that any modparams we stick into ACPICA do not
expose ACPICA filenames to users.

There are currently only two modparams in ACPICA,
just recently added for
http://bugzilla.kernel.org/show_bug.cgi?id=13041

With this change, they become

acpi.gts=1
acpi.bfs=1

rather than

hwsleep.gts=1
hwsleep.bfs=1

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/Makefile | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 17e50824a6f..72ac28da14e 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -5,40 +5,43 @@
 ccflags-y			:= -Os
 ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
 
-obj-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y	+= acpi.o
+
+acpi-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
 	 dsmethod.o  dsobject.o  dsutils.o   dswload.o  dswstate.o \
 	 dsinit.o
 
-obj-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
+acpi-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
 	 evmisc.o   evrgnini.o  evxface.o  evxfregn.o \
 	 evgpe.o    evgpeblk.o
 
-obj-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
+acpi-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
 	 exconvrt.o  exfldio.o  exoparg1.o  exprep.o    exresop.o   exsystem.o\
 	 excreate.o  exmisc.o   exoparg2.o  exregion.o  exstore.o   exutils.o \
 	 exdump.o    exmutex.o  exoparg3.o  exresnte.o  exstoren.o
 
-obj-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
 
-obj-$(ACPI_FUTURE_USAGE) += hwtimer.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
 
-obj-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
+acpi-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
 	 nsalloc.o   nseval.o    nsnames.o   nsutils.o   nsxfname.o \
 	 nsdump.o    nsinit.o    nsobject.o  nswalk.o    nsxfobj.o  \
 	 nsparse.o   nspredef.o
 
-obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
 
-obj-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
+acpi-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
 	 psopcode.o  psscope.o  psutils.o  psxface.o
 
-obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
+acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
 	 rscalc.o  rsirq.o  rsmemory.o  rsutils.o
 
-obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
 
-obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
+acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
 
-obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
 		utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
 		utstate.o utmutex.o utobject.o utresrc.o utlock.o
-- 
cgit v1.2.3


From 9b05126baa146fc3f41360164141d4e1b3ea93c4 Mon Sep 17 00:00:00 2001
From: Ashish Karkare <akarkare@marvell.com>
Date: Thu, 7 May 2009 16:31:01 -0700
Subject: net: remove stale reference to fastroute from Kconfig help text

Signed-off-by: Ashish Karkare <akarkare@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/Kconfig | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/net/Kconfig b/net/Kconfig
index ce77db4fcec..c19f549c8e7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -119,12 +119,6 @@ menuconfig NETFILTER
 	  <file:Documentation/Changes> under "iptables" for the location of
 	  these packages.
 
-	  Make sure to say N to "Fast switching" below if you intend to say Y
-	  here, as Fast switching currently bypasses netfilter.
-
-	  Chances are that you should say Y here if you compile a kernel which
-	  will run as a router and N for regular hosts. If unsure, say N.
-
 if NETFILTER
 
 config NETFILTER_DEBUG
-- 
cgit v1.2.3


From 5afc4abe7902b8453c248321daa9b13b12d9c838 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 7 May 2009 21:11:56 -0400
Subject: ACPI: video: DMI workaround another broken Acer BIOS enabling display
 brightness

http://bugzilla.kernel.org/show_bug.cgi?id=13121

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 7e8ee49ebd4..3a3d1565a7d 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -562,6 +562,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
 		},
 	},
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5710Z",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+		},
+	},
 	{}
 };
 
-- 
cgit v1.2.3


From d07a9cba6be5c0e947afc1014b5a62182a86f1f1 Mon Sep 17 00:00:00 2001
From: Tim Cole <tim.cole@canonical.com>
Date: Thu, 7 May 2009 17:08:42 -0700
Subject: Input: joydev - blacklist digitizers

BTN_TOUCH is not set by the wacom driver which causes it to be handled by the
joydev driver while the resulting device is broken. This causes problems with
applications that try to use a joystick device.

Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143

Signed-off-by: Tim Cole <tim.cole@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/joydev.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 4224f011284..012a5e75399 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -843,7 +843,13 @@ static const struct input_device_id joydev_blacklist[] = {
 				INPUT_DEVICE_ID_MATCH_KEYBIT,
 		.evbit = { BIT_MASK(EV_KEY) },
 		.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
-	},	/* Avoid itouchpads, touchscreens and tablets */
+	},	/* Avoid itouchpads and touchscreens */
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
+	},	/* Avoid tablets, digitisers and similar devices */
 	{ }	/* Terminating entry */
 };
 
-- 
cgit v1.2.3


From 9e68177ef93b2f34eee5a1e1707bceef4b9ba69c Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Thu, 7 May 2009 17:14:21 -0700
Subject: Input: ff-memless - fix signed to unsigned bit overflow

When userspace sets effect->u.rumble.strong_magnitude to 0x8001 or
larger, ml_combine_effects() would always return strong_magnitude
0xffff.

Problem is that 'gain' is passed in as signed integer. Multiplying
magnitude (__u16) with gain (int) causes magnitude read as signed and
results negative value (with magnitude > 0x8000). This signed integer
is then divided and value, still negative, converted to 32bit unsigned
integer. Finally checking combine overflow min(new+old, 0xffff) gives
out 0xffff.

Fix is to simply change 'gain' to unsigned int.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/ff-memless.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index bc4e40f3ede..2d1415e1683 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -226,7 +226,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type)
  */
 static void ml_combine_effects(struct ff_effect *effect,
 			       struct ml_effect_state *state,
-			       int gain)
+			       unsigned int gain)
 {
 	struct ff_effect *new = state->effect;
 	unsigned int strong, weak, i;
-- 
cgit v1.2.3


From 90e4ee5d311d4e0729daa676b1d7f754265b5874 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Fri, 8 May 2009 03:04:30 +0000
Subject: [CIFS] Fix double list addition in cifs posix open code

Remove adding open file entry twice to lists in the file
Do not fill file info twice in case of posix opens and creates

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/dir.c  | 15 +++++++++------
 fs/cifs/file.c | 14 --------------
 2 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 461750e0136..11431ed72a7 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -281,6 +281,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	int create_options = CREATE_NOT_DIR;
 	int oplock = 0;
 	int oflags;
+	bool posix_create = false;
 	/*
 	 * BB below access is probably too much for mknod to request
 	 *    but we have to do query and setpathinfo so requesting
@@ -328,11 +329,13 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 		   negotation.  EREMOTE indicates DFS junction, which is not
 		   handled in posix open */
 
-		if ((rc == 0) && (newinode == NULL))
-			goto cifs_create_get_file_info; /* query inode info */
-		else if (rc == 0) /* success, no need to query */
-			goto cifs_create_set_dentry;
-		else if ((rc != -EIO) && (rc != -EREMOTE) &&
+		if (rc == 0) {
+			posix_create = true;
+			if (newinode == NULL) /* query inode info */
+				goto cifs_create_get_file_info;
+			else /* success, no need to query */
+				goto cifs_create_set_dentry;
+		} else if ((rc != -EIO) && (rc != -EREMOTE) &&
 			 (rc != -EOPNOTSUPP)) /* path not found or net err */
 			goto cifs_create_out;
 		/* else fallthrough to retry, using older open call, this is
@@ -464,7 +467,7 @@ cifs_create_set_dentry:
 	if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
 		/* mknod case - do not leave file open */
 		CIFSSMBClose(xid, tcon, fileHandle);
-	} else if (newinode) {
+	} else if (!(posix_create) && (newinode)) {
 			cifs_fill_fileinfo(newinode, fileHandle,
 					cifs_sb->tcon, write_only);
 	}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 50ca088d886..38c06f82657 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -129,15 +129,12 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode,
 			struct file *file, struct cifsInodeInfo *pCifsInode,
 			struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
 {
-	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-/*	struct timespec temp; */   /* BB REMOVEME BB */
 
 	file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
 	if (file->private_data == NULL)
 		return -ENOMEM;
 	pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
 	write_lock(&GlobalSMBSeslock);
-	list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
 
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
 	if (pCifsInode == NULL) {
@@ -145,17 +142,6 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode,
 		return -EINVAL;
 	}
 
-	/* want handles we can use to read with first
-	   in the list so we do not have to walk the
-	   list to search for one in write_begin */
-	if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
-		list_add_tail(&pCifsFile->flist,
-			      &pCifsInode->openFileList);
-	} else {
-		list_add(&pCifsFile->flist,
-			 &pCifsInode->openFileList);
-	}
-
 	if (pCifsInode->clientCanCacheRead) {
 		/* we have the inode open somewhere else
 		   no need to discard cache data */
-- 
cgit v1.2.3


From ddc50b6ad634d9ce2526a777d4b7da80effdfb60 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 8 May 2009 00:07:30 -0400
Subject: ACPI: power: update error message

"Transitioning device [%s] to D%d" is not correct.
We print this line when we attempted to transition
the device, and it failed.

So instead, print
"Device [%s] failed to transition to D%d\n"

This can happen under two conditions:

1. acpi_power_transition() fails when trying to handle the
   _ON/_OFF for associated power resource.

2. acpi_evaluate_object() on the explicit _PS0/_PS3
   for that actual device could fail.

this change clarifies, but doesn't fix
http://bugzilla.kernel.org/show_bug.cgi?id=13243

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e8f7b64e92d..ae862f1798d 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
       end:
 	if (result)
 		printk(KERN_WARNING PREFIX
-			      "Transitioning device [%s] to D%d\n",
+			      "Device [%s] failed to transition to D%d\n",
 			      device->pnp.bus_id, state);
 	else {
 		device->power.state = state;
-- 
cgit v1.2.3


From 19bde778c1fd2574cc020a618d7d576f260271ca Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 8 May 2009 00:22:29 -0400
Subject: ACPI: suspend: don't let device _PS3 failure prevent suspend

6328a57401dc5f5cf9931738eb7268fcd8058c49
"Enable PNPACPI _PSx Support, v3"

added a call to acpi_bus_set_power(handle, ACPI_STATE_D3)
to pnpacpi_disable_resource() before the existing call
to evaluate _DIS on the device.

This caused suspend to fail on the system in
http://bugzilla.kernel.org/show_bug.cgi?id=13243
because the sanity check to verify we entered _PS3
failed on the serial port.

As a work-around, that sanity check can be disabled
system-wide with "acpi.power_nocheck=1"

Or perhaps we should just shrug off the _PS3 failure
and carry on with _DIS like we used to -- which is
what this patch does.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/pnp/pnpacpi/core.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 9a3a682c698..9496494f340 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -110,11 +110,9 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
 
 	/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
 	ret = 0;
-	if (acpi_bus_power_manageable(handle)) {
-		ret = acpi_bus_set_power(handle, ACPI_STATE_D3);
-		if (ret)
-			return ret;
-	}
+	if (acpi_bus_power_manageable(handle))
+		acpi_bus_set_power(handle, ACPI_STATE_D3);
+		/* continue even if acpi_bus_set_power() fails */
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
 		ret = -ENODEV;
 	return ret;
-- 
cgit v1.2.3


From 2b6b7d4be487bada8c727df829c25068c7b5e5a3 Mon Sep 17 00:00:00 2001
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
Date: Thu, 7 May 2009 21:35:13 -0700
Subject: IB/mlx4: Don't overwrite fast registration page list when posting
 work request

The low-level mlx4 driver modified the page-list addresses for fast
register work requests post send to big-endian, and set a "present"
bit.  This caused problems later when the consumer attempted to unmap
the pages using the page-list (using the list addresses which were
assumed to be still in CPU-endian order).  Fix the mlx4 driver to
allocate two buffers and use a private buffer for the hardware-format
bus addresses.

This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1571>,
an NFS/RDMA server crash.  The cause of the crash was found by Vu Pham
of Mellanox.  The fix is along the lines suggested by Steve Wise in
comment #21 in bug 1571.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mlx4/mlx4_ib.h |  1 +
 drivers/infiniband/hw/mlx4/mr.c      | 10 ++++++++--
 drivers/infiniband/hw/mlx4/qp.c      |  2 +-
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 9974e886b8d..8a7dd6795fa 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -86,6 +86,7 @@ struct mlx4_ib_mr {
 
 struct mlx4_ib_fast_reg_page_list {
 	struct ib_fast_reg_page_list	ibfrpl;
+	__be64			       *mapped_page_list;
 	dma_addr_t			map;
 };
 
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index 8e4d26d56a9..8f3666b20ea 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -231,7 +231,11 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device
 	if (!mfrpl)
 		return ERR_PTR(-ENOMEM);
 
-	mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
+	mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL);
+	if (!mfrpl->ibfrpl.page_list)
+		goto err_free;
+
+	mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
 						     size, &mfrpl->map,
 						     GFP_KERNEL);
 	if (!mfrpl->ibfrpl.page_list)
@@ -242,6 +246,7 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device
 	return &mfrpl->ibfrpl;
 
 err_free:
+	kfree(mfrpl->ibfrpl.page_list);
 	kfree(mfrpl);
 	return ERR_PTR(-ENOMEM);
 }
@@ -252,8 +257,9 @@ void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list)
 	struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list);
 	int size = page_list->max_page_list_len * sizeof (u64);
 
-	dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list,
+	dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list,
 			  mfrpl->map);
+	kfree(mfrpl->ibfrpl.page_list);
 	kfree(mfrpl);
 }
 
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index f385a24d31d..20724aee76f 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1365,7 +1365,7 @@ static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
 	int i;
 
 	for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
-		wr->wr.fast_reg.page_list->page_list[i] =
+		mfrpl->mapped_page_list[i] =
 			cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
 				    MLX4_MTT_FLAG_PRESENT);
 
-- 
cgit v1.2.3


From 61438766514a2d7f191ce1b3cf6812eabbef4ef7 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 6 May 2009 13:02:19 +0100
Subject: x86: fix boot hang in early_reserve_e820()

If the first non-reserved (sub-)range doesn't fit the size requested,
an endless loop will be entered. If a range returned from
find_e820_area_size() turns out insufficient in size, the range must
be skipped before calling the function again.

[ Impact: fixes boot hang on some platforms ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/e820.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index ef2c3563357..00628130292 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1074,12 +1074,13 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
 	u64 addr;
 	u64 start;
 
-	start = startt;
-	while (size < sizet && (start + 1))
+	for (start = startt; ; start += size) {
 		start = find_e820_area_size(start, &size, align);
-
-	if (size < sizet)
-		return 0;
+		if (!(start + 1))
+			return 0;
+		if (size >= sizet)
+			break;
+	}
 
 #ifdef CONFIG_X86_32
 	if (start >= MAXMEM)
-- 
cgit v1.2.3


From 498343967613183611ac37dccb2846496d954c06 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Wed, 6 May 2009 13:06:47 +0100
Subject: x86-64: finish cleanup_highmaps()'s job wrt. _brk_end

With the introduction of the .brk section, special care must be taken
that no unused page table entries remain if _brk_end and _end are
separated by a 2M page boundary. cleanup_highmap() runs very early and
hence cannot take care of that, hence potential entries needing to be
removed past _brk_end must be cleared once the brk allocator has done
its job.

[ Impact: avoids undesirable TLB aliases ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/init.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index fd3da1dda1c..ae4f7b5d710 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -7,6 +7,7 @@
 #include <asm/page.h>
 #include <asm/page_types.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 
@@ -304,8 +305,23 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 #endif
 
 #ifdef CONFIG_X86_64
-	if (!after_bootmem)
+	if (!after_bootmem && !start) {
+		pud_t *pud;
+		pmd_t *pmd;
+
 		mmu_cr4_features = read_cr4();
+
+		/*
+		 * _brk_end cannot change anymore, but it and _end may be
+		 * located on different 2M pages. cleanup_highmap(), however,
+		 * can only consider _end when it runs, so destroy any
+		 * mappings beyond _brk_end here.
+		 */
+		pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
+		pmd = pmd_offset(pud, _brk_end - 1);
+		while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
+			pmd_clear(pmd);
+	}
 #endif
 	__flush_tlb_all();
 
-- 
cgit v1.2.3


From 6407df5ca54a511054200a1eb23f78f723ca1de4 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 8 May 2009 10:51:41 +0800
Subject: x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP

Tim Starling reported that crashdump will panic with kernel compiled
with CONFIG_KEXEC_JUMP due to null pointer deference in
machine_kexec_32.c: machine_kexec(), when deferencing
kexec_image. Refering to:

http://bugzilla.kernel.org/show_bug.cgi?id=13265

This patch fixes the BUG via replacing global variable reference:
kexec_image in machine_kexec() with local variable reference: image,
which is more appropriate, and will not be null.

Same BUG is in machine_kexec_64.c too, so fixed too in the same way.

[ Impact: fix crash on kexec ]

Reported-by: Tim Starling <tstarling@wikimedia.org>
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/machine_kexec_32.c | 4 ++--
 arch/x86/kernel/machine_kexec_64.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index e7368c1da01..c1c429d0013 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -194,7 +194,7 @@ void machine_kexec(struct kimage *image)
 				       unsigned int preserve_context);
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		save_processor_state();
 #endif
 
@@ -253,7 +253,7 @@ void machine_kexec(struct kimage *image)
 					   image->preserve_context);
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		restore_processor_state();
 #endif
 
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 89cea4d4467..84c3bf209e9 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -274,7 +274,7 @@ void machine_kexec(struct kimage *image)
 	int save_ftrace_enabled;
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		save_processor_state();
 #endif
 
@@ -333,7 +333,7 @@ void machine_kexec(struct kimage *image)
 				       image->preserve_context);
 
 #ifdef CONFIG_KEXEC_JUMP
-	if (kexec_image->preserve_context)
+	if (image->preserve_context)
 		restore_processor_state();
 #endif
 
-- 
cgit v1.2.3


From 5dd17cb992ef4c1ebb1a2d60cbef4b6967974673 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 7 May 2009 16:22:53 +0200
Subject: ALSA: hda - Fix line-in on Mac Mini Core2 Duo

BIOS on Mac Mini Core2 Duo sets both INPUT and OUTPUT pinctl bits to
the line-in jack, and it confuses the driver as if it's a valid input.
This patch adds the check of OUTPUT bit so that the driver fixes the
invalid pin setup.

Tested-by: Tino Keitel <tino.keitel@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 917bc5d3ac2..03b3646018a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4079,7 +4079,12 @@ static int stac92xx_init(struct hda_codec *codec)
 				pinctl = snd_hda_codec_read(codec, nid, 0,
 					AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
 				/* if PINCTL already set then skip */
-				if (!(pinctl & AC_PINCTL_IN_EN)) {
+				/* Also, if both INPUT and OUTPUT are set,
+				 * it must be a BIOS bug; need to override, too
+				 */
+				if (!(pinctl & AC_PINCTL_IN_EN) ||
+				    (pinctl & AC_PINCTL_OUT_EN)) {
+					pinctl &= ~AC_PINCTL_OUT_EN;
 					pinctl |= AC_PINCTL_IN_EN;
 					stac92xx_auto_set_pinctl(codec, nid,
 								 pinctl);
-- 
cgit v1.2.3


From 33df4db04a79660150e1948e3296eeb451ac121b Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 7 May 2009 11:56:44 -0700
Subject: x86: xen, i386: reserve Xen pagetables

The Xen pagetables are no longer implicitly reserved as part of the other
i386_start_kernel reservations, so make sure we explicitly reserve them.
This prevents them from being released into the general kernel free page
pool and reused.

[ Impact: fix Xen guest crash ]

Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4A032EEC.30509@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/mmu.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 9842b121240..e25a78e1113 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1794,6 +1794,11 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 
 	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
 
+	reserve_early(__pa(xen_start_info->pt_base),
+		      __pa(xen_start_info->pt_base +
+			   xen_start_info->nr_pt_frames * PAGE_SIZE),
+		      "XEN PAGETABLES");
+
 	return swapper_pg_dir;
 }
 #endif	/* CONFIG_X86_64 */
-- 
cgit v1.2.3


From e5299926d7459d9fa7c7f856983147817aedb10e Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Date: Fri, 8 May 2009 17:28:40 +0900
Subject: x86: MCE: make cmci_discover_lock irq-safe

Lockdep reports the warning below when Li tries to offline one cpu:

[  110.835487] =================================
[  110.835616] [ INFO: inconsistent lock state ]
[  110.835688] 2.6.30-rc4-00336-g8c9ed89 #52
[  110.835757] ---------------------------------
[  110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
[  110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[  110.835982]  (cmci_discover_lock){?.+...}, at: [<ffffffff80236dc0>] cmci_clear+0x30/0x9b

cmci_clear() can be called via smp_call_function_single().

It is better to disable interrupt while holding cmci_discover_lock,
to turn it into an irq-safe lock - we can deadlock otherwise.

[ Impact: fix possible deadlock in the MCE code ]

Reported-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Shaohua Li<shaohua.li@intel.com>
---
 arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index d6b72df89d6..cef3ee30744 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -151,10 +151,11 @@ static void print_update(char *type, int *hdr, int num)
 static void cmci_discover(int banks, int boot)
 {
 	unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
+	unsigned long flags;
 	int hdr = 0;
 	int i;
 
-	spin_lock(&cmci_discover_lock);
+	spin_lock_irqsave(&cmci_discover_lock, flags);
 	for (i = 0; i < banks; i++) {
 		u64 val;
 
@@ -184,7 +185,7 @@ static void cmci_discover(int banks, int boot)
 			WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
 		}
 	}
-	spin_unlock(&cmci_discover_lock);
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
 	if (hdr)
 		printk(KERN_CONT "\n");
 }
@@ -211,13 +212,14 @@ void cmci_recheck(void)
  */
 void cmci_clear(void)
 {
+	unsigned long flags;
 	int i;
 	int banks;
 	u64 val;
 
 	if (!cmci_supported(&banks))
 		return;
-	spin_lock(&cmci_discover_lock);
+	spin_lock_irqsave(&cmci_discover_lock, flags);
 	for (i = 0; i < banks; i++) {
 		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
 			continue;
@@ -227,7 +229,7 @@ void cmci_clear(void)
 		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
 		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
-	spin_unlock(&cmci_discover_lock);
+	spin_unlock_irqrestore(&cmci_discover_lock, flags);
 }
 
 /*
-- 
cgit v1.2.3


From cd1a6de7d4a492bf3405a6c070075a4cb8c90262 Mon Sep 17 00:00:00 2001
From: Peter Horton <zero@colonel-panic.org>
Date: Fri, 8 May 2009 13:51:53 +0100
Subject: mtd: fix timeout in M25P80 driver

Extend erase timeout in M25P80 SPI Flash driver.

The M25P80 drivers fails erasing sectors on a M25P128 because the ready
wait timeout is too short. Change the timeout from a simple loop count to a
suitable number of seconds.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/m25p80.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index dfadef84c05..cc6369ea67d 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
 #define	SR_SRWD			0x80	/* SR write protect */
 
 /* Define max times to check status register before we give up. */
-#define	MAX_READY_WAIT_COUNT	1000000
+#define	MAX_READY_WAIT_JIFFIES	(10 * HZ)	/* eg. M25P128 specs 6s max sector erase */
 #define	CMD_SIZE		4
 
 #ifdef CONFIG_M25PXX_USE_FAST_READ
@@ -139,20 +139,20 @@ static inline int write_enable(struct m25p *flash)
  */
 static int wait_till_ready(struct m25p *flash)
 {
-	int count;
+	unsigned long deadline;
 	int sr;
 
-	/* one chip guarantees max 5 msec wait here after page writes,
-	 * but potentially three seconds (!) after page erase.
-	 */
-	for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
+	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+
+	do {
 		if ((sr = read_sr(flash)) < 0)
 			break;
 		else if (!(sr & SR_WIP))
 			return 0;
 
-		/* REVISIT sometimes sleeping would be best */
-	}
+		cond_resched();
+
+	} while (!time_after_eq(jiffies, deadline));
 
 	return 1;
 }
-- 
cgit v1.2.3


From b9008708f24de8fb9bdbfb5d3b27e36d5a357eda Mon Sep 17 00:00:00 2001
From: Luca Tettamanti <kronos.it@gmail.com>
Date: Fri, 8 May 2009 20:27:28 +0200
Subject: hwmon: (asus_atk0110) Fix compiler warning

atk_sensor_type is only used when DEBUG is defined.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/asus_atk0110.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 0897edef257..bff0103610c 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -348,6 +348,7 @@ static int validate_hwmon_pack(struct atk_data *data, union acpi_object *obj)
 	return 0;
 }
 
+#ifdef DEBUG
 static char const *atk_sensor_type(union acpi_object *flags)
 {
 	u64 type = flags->integer.value & ATK_TYPE_MASK;
@@ -370,6 +371,7 @@ static char const *atk_sensor_type(union acpi_object *flags)
 
 	return what;
 }
+#endif
 
 static void atk_print_sensor(struct atk_data *data, union acpi_object *obj)
 {
-- 
cgit v1.2.3


From 848ddf116b3d1711c956fac8627be12dfe8d736f Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 8 May 2009 20:27:28 +0200
Subject: hwmon: (w83781d) Fix W83782D support (NULL pointer dereference)

Commit 360782dde00a2e6e7d9fd57535f90934707ab8a8 (hwmon: (w83781d) Stop
abusing struct i2c_client for ISA devices) broke W83782D support for
devices connected on the ISA bus. You will hit a NULL pointer
dereference as soon as you read any device attribute. Other devices,
and W83782D devices on the SMBus, aren't affected.

Reported-by: Michel Abraham
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Michel Abraham
---
 drivers/hwmon/w83781d.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index dbfb30c588d..0bdab959b73 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1462,7 +1462,8 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
 				data->pwm[i] =
 				    w83781d_read_value(data,
 						       W83781D_REG_PWM[i]);
-				if ((data->type != w83782d || !client->driver)
+				/* Only W83782D on SMBus has PWM3 and PWM4 */
+				if ((data->type != w83782d || !client)
 				    && i == 1)
 					break;
 			}
-- 
cgit v1.2.3


From e81963b180ac502fda0326edf059b1e29cdef1a2 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 8 May 2009 12:45:26 -0700
Subject: ipv4: Make INET_LRO a bool instead of tristate.

This code is used as a library by several device drivers,
which select INET_LRO.

If some are modules and some are statically built into the
kernel, we get build failures if INET_LRO is modular.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index b2cf91e4cca..9d26a3da37e 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -407,7 +407,7 @@ config INET_XFRM_MODE_BEET
 	  If unsure, say Y.
 
 config INET_LRO
-	tristate "Large Receive Offload (ipv4/tcp)"
+	bool "Large Receive Offload (ipv4/tcp)"
 
 	---help---
 	  Support for Large Receive Offload (ipv4/tcp).
-- 
cgit v1.2.3


From cbec415991c0007f5c78fad76294373e8ac2d59a Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 1 May 2009 02:27:45 +0400
Subject: powerpc/fsl_soc: Remove mpc83xx_wdt_init, again

commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert
gianfar to an of_platform_driver"), possibly due merge issues,
reintroduced completely unneded mpc83xx_wdt_init call, which
I removed some time ago in commit 20d38e01d48019c578ab0ec1464454c0
("powerpc/fsl_soc: remove mpc83xx_wdt code").

Remove it once again.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_soc.c | 46 -------------------------------------------
 1 file changed, 46 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index afe8dbc964a..5c64ccd402e 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
-	struct resource r;
-	struct device_node *np;
-	struct platform_device *dev;
-	u32 freq = fsl_get_sys_freq();
-	int ret;
-
-	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
-	if (!np) {
-		ret = -ENODEV;
-		goto nodev;
-	}
-
-	memset(&r, 0, sizeof(r));
-
-	ret = of_address_to_resource(np, 0, &r);
-	if (ret)
-		goto err;
-
-	dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
-	if (IS_ERR(dev)) {
-		ret = PTR_ERR(dev);
-		goto err;
-	}
-
-	ret = platform_device_add_data(dev, &freq, sizeof(freq));
-	if (ret)
-		goto unreg;
-
-	of_node_put(np);
-	return 0;
-
-unreg:
-	platform_device_unregister(dev);
-err:
-	of_node_put(np);
-nodev:
-	return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
 static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {
 	if (!phy_type)
-- 
cgit v1.2.3


From be8be9eccbf2d908a7e56b3f7a71105cd88da06b Mon Sep 17 00:00:00 2001
From: Simon Horman <horms@verge.net.au>
Date: Wed, 6 May 2009 15:02:29 +0000
Subject: ipvs: Fix IPv4 FWMARK virtual services
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This fixes the use of fwmarks to denote IPv4 virtual services
which was unfortunately broken as a result of the integration
of IPv6 support into IPVS, which was included in 2.6.28.

The problem arises because fwmarks are stored in the 4th octet
of a union nf_inet_addr .all, however in the case of IPv4 only
the first octet, corresponding to .ip, is assigned and compared.

In other words, using .all = { 0, 0, 0, htonl(svc->fwmark) always
results in a value of 0 (32bits) being stored for IPv4. This means
that one fwmark can be used, as it ends up being mapped to 0, but things
break down when multiple fwmarks are used, as they all end up being mapped
to 0.

As fwmarks are 32bits a reasonable fix seems to be to just store the fwmark
in .ip, and comparing and storing .ip when fwmarks are used.

This patch makes the assumption that in calls to ip_vs_ct_in_get()
and ip_vs_sched_persist() if the proto parameter is IPPROTO_IP then
we are dealing with an fwmark. I believe this is valid as ip_vs_in()
does fairly strict filtering on the protocol and IPPROTO_IP should
not be used in these calls unless explicitly passed when making
these calls for fwmarks in ip_vs_sched_persist().

Tested-by: Fabien Duchêne <fabien.duchene@student.uclouvain.be>
Cc: Joseph Mack NA3T <jmack@wm7d.net>
Cc: Julius Volz <julius.volz@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/ipvs/ip_vs_conn.c | 9 +++++++--
 net/netfilter/ipvs/ip_vs_core.c | 4 ++--
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 60aba45023f..77bfdfeb966 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -260,7 +260,10 @@ struct ip_vs_conn *ip_vs_ct_in_get
 	list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
 		if (cp->af == af &&
 		    ip_vs_addr_equal(af, s_addr, &cp->caddr) &&
-		    ip_vs_addr_equal(af, d_addr, &cp->vaddr) &&
+		    /* protocol should only be IPPROTO_IP if
+		     * d_addr is a fwmark */
+		    ip_vs_addr_equal(protocol == IPPROTO_IP ? AF_UNSPEC : af,
+		                     d_addr, &cp->vaddr) &&
 		    s_port == cp->cport && d_port == cp->vport &&
 		    cp->flags & IP_VS_CONN_F_TEMPLATE &&
 		    protocol == cp->protocol) {
@@ -698,7 +701,9 @@ ip_vs_conn_new(int af, int proto, const union nf_inet_addr *caddr, __be16 cport,
 	cp->cport	   = cport;
 	ip_vs_addr_copy(af, &cp->vaddr, vaddr);
 	cp->vport	   = vport;
-	ip_vs_addr_copy(af, &cp->daddr, daddr);
+	/* proto should only be IPPROTO_IP if d_addr is a fwmark */
+	ip_vs_addr_copy(proto == IPPROTO_IP ? AF_UNSPEC : af,
+			&cp->daddr, daddr);
 	cp->dport          = dport;
 	cp->flags	   = flags;
 	spin_lock_init(&cp->lock);
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index cb3e031335e..8dddb17a947 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -278,7 +278,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 		 */
 		if (svc->fwmark) {
 			union nf_inet_addr fwmark = {
-				.all = { 0, 0, 0, htonl(svc->fwmark) }
+				.ip = htonl(svc->fwmark)
 			};
 
 			ct = ip_vs_ct_in_get(svc->af, IPPROTO_IP, &snet, 0,
@@ -306,7 +306,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 			 */
 			if (svc->fwmark) {
 				union nf_inet_addr fwmark = {
-					.all = { 0, 0, 0, htonl(svc->fwmark) }
+					.ip = htonl(svc->fwmark)
 				};
 
 				ct = ip_vs_conn_new(svc->af, IPPROTO_IP,
-- 
cgit v1.2.3


From 201517a7f3ec497fff545a7659c6c876f89f9054 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <mhiramat@redhat.com>
Date: Thu, 7 May 2009 16:31:26 -0400
Subject: kprobes: fix to use text_mutex around arm/disarm kprobe

Fix kprobes to lock text_mutex around some arch_arm/disarm_kprobe() which
are newly added by commit de5bd88d5a5cce3cacea904d3503e5ebdb3852a2.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kprobes.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index a5e74ddee0e..c0fa54b276d 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -319,6 +319,22 @@ struct kprobe __kprobes *get_kprobe(void *addr)
 	return NULL;
 }
 
+/* Arm a kprobe with text_mutex */
+static void __kprobes arm_kprobe(struct kprobe *kp)
+{
+	mutex_lock(&text_mutex);
+	arch_arm_kprobe(kp);
+	mutex_unlock(&text_mutex);
+}
+
+/* Disarm a kprobe with text_mutex */
+static void __kprobes disarm_kprobe(struct kprobe *kp)
+{
+	mutex_lock(&text_mutex);
+	arch_disarm_kprobe(kp);
+	mutex_unlock(&text_mutex);
+}
+
 /*
  * Aggregate handlers for multiple kprobes support - these handlers
  * take care of invoking the individual kprobe handlers on p->list
@@ -538,7 +554,7 @@ static int __kprobes add_new_kprobe(struct kprobe *ap, struct kprobe *p)
 		ap->flags &= ~KPROBE_FLAG_DISABLED;
 		if (!kprobes_all_disarmed)
 			/* Arm the breakpoint again. */
-			arch_arm_kprobe(ap);
+			arm_kprobe(ap);
 	}
 	return 0;
 }
@@ -789,11 +805,8 @@ static int __kprobes __unregister_kprobe_top(struct kprobe *p)
 		 * enabled and not gone - otherwise, the breakpoint would
 		 * already have been removed. We save on flushing icache.
 		 */
-		if (!kprobes_all_disarmed && !kprobe_disabled(old_p)) {
-			mutex_lock(&text_mutex);
-			arch_disarm_kprobe(p);
-			mutex_unlock(&text_mutex);
-		}
+		if (!kprobes_all_disarmed && !kprobe_disabled(old_p))
+			disarm_kprobe(p);
 		hlist_del_rcu(&old_p->hlist);
 	} else {
 		if (p->break_handler && !kprobe_gone(p))
@@ -810,7 +823,7 @@ noclean:
 		if (!kprobe_disabled(old_p)) {
 			try_to_disable_aggr_kprobe(old_p);
 			if (!kprobes_all_disarmed && kprobe_disabled(old_p))
-				arch_disarm_kprobe(old_p);
+				disarm_kprobe(old_p);
 		}
 	}
 	return 0;
@@ -1364,7 +1377,7 @@ int __kprobes disable_kprobe(struct kprobe *kp)
 		try_to_disable_aggr_kprobe(p);
 
 	if (!kprobes_all_disarmed && kprobe_disabled(p))
-		arch_disarm_kprobe(p);
+		disarm_kprobe(p);
 out:
 	mutex_unlock(&kprobe_mutex);
 	return ret;
@@ -1393,7 +1406,7 @@ int __kprobes enable_kprobe(struct kprobe *kp)
 	}
 
 	if (!kprobes_all_disarmed && kprobe_disabled(p))
-		arch_arm_kprobe(p);
+		arm_kprobe(p);
 
 	p->flags &= ~KPROBE_FLAG_DISABLED;
 	if (p != kp)
-- 
cgit v1.2.3


From 091bf7624d1c90cec9e578a18529f615213ff847 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 8 May 2009 17:14:14 -0700
Subject: Linux 2.6.30-rc5

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index b18afad2e10..9b2b58c3b3d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
-- 
cgit v1.2.3


From d86c1302c58e4d4ebd99d459c2daff13613ac7f4 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Tue, 21 Apr 2009 07:22:53 -0700
Subject: Driver core: platform: fix kernel-doc warnings

Fix function parameter notation in platform.c;
fixes kernel-doc warnings.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/platform.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index b5b6c973a2e..ec5400c3202 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1028,7 +1028,7 @@ static __initdata LIST_HEAD(early_platform_device_list);
 
 /**
  * early_platform_driver_register
- * @edrv: early_platform driver structure
+ * @epdrv: early_platform driver structure
  * @buf: string passed from early_param()
  */
 int __init early_platform_driver_register(struct early_platform_driver *epdrv,
@@ -1112,7 +1112,7 @@ void __init early_platform_driver_register_all(char *class_str)
 
 /**
  * early_platform_match
- * @edrv: early platform driver structure
+ * @epdrv: early platform driver structure
  * @id: id to match against
  */
 static  __init struct platform_device *
@@ -1130,7 +1130,7 @@ early_platform_match(struct early_platform_driver *epdrv, int id)
 
 /**
  * early_platform_left
- * @edrv: early platform driver structure
+ * @epdrv: early platform driver structure
  * @id: return true if id or above exists
  */
 static  __init int early_platform_left(struct early_platform_driver *epdrv,
-- 
cgit v1.2.3


From 441ee4cb874622bc9a11c7b022a38919b04c105f Mon Sep 17 00:00:00 2001
From: Henrik Austad <henrik@austad.us>
Date: Mon, 20 Apr 2009 18:42:38 -0700
Subject: Doc/sysfs-rules: Swap the order of the words so the sentence makes
 more sense

Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/sysfs-rules.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index 6049a2a84dd..5d8bc2cd250 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.
-- 
cgit v1.2.3


From fe0e2bb9b3ca55b78e637b1260faeaa951523959 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Wed, 22 Apr 2009 15:49:31 -0400
Subject: Remove old PRINTK_DEBUG config item

On Tue, Apr 21, 2009 at 01:55:53PM +0200, Stefan Richter wrote:
> Robert P. J. Day wrote:
> >   lib/Kconfig.debug:      select PRINTK_DEBUG
> >
> > should that perhaps refer to "DYNAMIC_PRINTK_DEBUG"?  since there is
> > no such thing as a PRINTK_DEBUG Kconfig variable.
>
> Looks like a rudiment from an earlier version of Jason's "driver core:
> basic infrastructure for per-module dynamic debug messages",
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=346e15beb5343c2eb8216d820f2ed8f150822b08
> Search an LKML archive for '+#ifdef CONFIG_PRINTK_DEBUG'.
>
> Jason, should it be deleted or replaced by something?

We re-named 'DYNAMIC_PRINTK_DEBUG' to 'DYNAMIC_DEBUG' in 2.6.30....
'PRINTK_DEBUG' as pointed out never existed. So, it appears to be
extraneous, and should be removed. thanks for pointing it out.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 lib/Kconfig.debug | 1 -
 1 file changed, 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 812c28207ba..6cdcf38f2da 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -891,7 +891,6 @@ config DYNAMIC_DEBUG
 	default n
 	depends on PRINTK
 	depends on DEBUG_FS
-	select PRINTK_DEBUG
 	help
 
 	  Compiles debug level messages into the kernel, which would not
-- 
cgit v1.2.3


From bee86321b7b2312fbb62f4cb903eba1cca45e8ad Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Fri, 13 Mar 2009 23:06:59 +0800
Subject: Revert driver core: fix passing platform_data

This reverts commit ce21c7bcd796fc4f45d48781b7e85f493cc55ee5:
	We will remove platform_data field from struct device until
	all platform devices pass its specific data from platfom_device
	and all platform drivers use platform specific data passed by
	platform_device->platform_data. This kind of conversion will
	need a long time, for thousands of files is affected.

	To make the conversion easily, we allow platform specific data
	passed by struct device or struct platform_device and platform
	driver may use it from struct device or struct platform_device.

As we really don't want to do this at all.


Cc: David Brownell <david-b@pacbell.net>
Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/platform.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index ec5400c3202..d1d0ee43192 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -247,20 +247,7 @@ int platform_device_add(struct platform_device *pdev)
 	else
 		dev_set_name(&pdev->dev, pdev->name);
 
-	/* We will remove platform_data field from struct device
-	* if all platform devices pass its platform specific data
-	* from platform_device. The conversion is going to be a
-	* long time, so we allow the two cases coexist to make
-	* this kind of fix more easily*/
-	if (pdev->platform_data && pdev->dev.platform_data) {
-		printk(KERN_ERR
-			       "%s: use which platform_data?\n",
-			       dev_name(&pdev->dev));
-	} else if (pdev->platform_data) {
-		pdev->dev.platform_data = pdev->platform_data;
-	} else if (pdev->dev.platform_data) {
-		pdev->platform_data = pdev->dev.platform_data;
-	}
+	pdev->platform_data = pdev->dev.platform_data;
 
 	for (i = 0; i < pdev->num_resources; i++) {
 		struct resource *p, *r = &pdev->resource[i];
-- 
cgit v1.2.3


From e67c85626cd02e306da1b4195bfaf68d61050796 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Sun, 8 Mar 2009 23:13:32 +0800
Subject: Revert driver core: move platform_data into platform_device

This reverts commit 006f4571a15fae3a0575f2a0f9e9b63b3d1012f8:

	This patch moves platform_data from struct device into
	struct platform_device, based on the two ideas:

	1. Now all platform_driver is registered by platform_driver_register,
	   which makes probe()/release()/... of platform_driver passed parameter
	   of platform_device *, so platform driver can get platform_data from
	   platform_device;

	2. Other kind of devices do not need to use platform_data, we can
	   decrease size of device if moving it to platform_device.

	Taking into consideration of thousands of files to be fixed and they
	can't be finished in one night(maybe it will take a long time), so we
	keep platform_data in device to allow two kind of cases coexist until
	all platform devices pass its platfrom data from
	platform_device->platform_data.

	All patches to do this kind of conversion are welcome.

As we don't really want to do it, it was a bad idea.

Cc: David Brownell <david-b@pacbell.net>
Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/platform.c         | 3 ---
 include/linux/device.h          | 9 ++-------
 include/linux/platform_device.h | 1 -
 3 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d1d0ee43192..8b4708e0624 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -217,7 +217,6 @@ int platform_device_add_data(struct platform_device *pdev, const void *data,
 	if (d) {
 		memcpy(d, data, size);
 		pdev->dev.platform_data = d;
-		pdev->platform_data = d;
 	}
 	return d ? 0 : -ENOMEM;
 }
@@ -247,8 +246,6 @@ int platform_device_add(struct platform_device *pdev)
 	else
 		dev_set_name(&pdev->dev, pdev->name);
 
-	pdev->platform_data = pdev->dev.platform_data;
-
 	for (i = 0; i < pdev->num_resources; i++) {
 		struct resource *p, *r = &pdev->resource[i];
 
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a69caaac18..5d5c197bad4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -384,13 +384,8 @@ struct device {
 	struct device_driver *driver;	/* which driver has allocated this
 					   device */
 	void		*driver_data;	/* data private to the driver */
-
-	void		*platform_data;	/* We will remove platform_data
-					   field if all platform devices
-					   pass its platform specific data
-					   from platform_device->platform_data,
-					   other kind of devices should not
-					   use platform_data. */
+	void		*platform_data;	/* Platform specific data, device
+					   core doesn't touch it */
 	struct dev_pm_info	power;
 
 #ifdef CONFIG_NUMA
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 72736fd8223..b67bb5d7b22 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -20,7 +20,6 @@ struct platform_device {
 	struct device	dev;
 	u32		num_resources;
 	struct resource	* resource;
-	void		*platform_data;
 
 	struct platform_device_id	*id_entry;
 };
-- 
cgit v1.2.3


From 10107bd04fc88657204ca40af2ace33626496fd3 Mon Sep 17 00:00:00 2001
From: Simon Arlott <simon@fire.lp0.eu>
Date: Thu, 23 Apr 2009 18:19:02 +0100
Subject: USB: cxacru: Fix negative dB output

Values of dB between -0.99 and -0.01 will be output with the wrong
sign. This converts the negative value to positive and outputs it
with a "-" prefix.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/atm/cxacru.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 6789089e246..56802d2e994 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -227,8 +227,14 @@ static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
 
 static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d.%02u\n",
-					value / 100, abs(value) % 100);
+	if (likely(value >= 0)) {
+		return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
+					value / 100, value % 100);
+	} else {
+		value = -value;
+		return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
+					value / 100, value % 100);
+	}
 }
 
 static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
-- 
cgit v1.2.3


From 1002bb77c0b7f1241a5108ffa04d836ddc5060c0 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 23 Apr 2009 22:38:12 -0400
Subject: USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug

For reference:
http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 2 ++
 drivers/usb/serial/ftdi_sio.h | 6 ++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8100f1d2590..aab567644b9 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -669,6 +669,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index c09f658a448..12330fa1c09 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -919,6 +919,12 @@
 #define JETI_VID		0x0c6c
 #define JETI_SPC1201_PID	0x04b2
 
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID		0x9e88
+#define MARVELL_SHEEVAPLUG_PID	0x9e8f
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
-- 
cgit v1.2.3


From 72a772a9a3da47e1cdbe01c4aa1105aa8badfff2 Mon Sep 17 00:00:00 2001
From: Andy Lutomirski <amluto@gmail.com>
Date: Tue, 28 Apr 2009 15:53:02 -0400
Subject: USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work.

If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then
cdc-wdm and usbtmc won't get built.

Signed-off-by: Andy Lutomirski <amluto@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 89299a5ce16..0716cdb44cd 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -27,6 +27,8 @@ obj-$(CONFIG_USB_WUSB)		+= wusbcore/
 
 obj-$(CONFIG_USB_ACM)		+= class/
 obj-$(CONFIG_USB_PRINTER)	+= class/
+obj-$(CONFIG_USB_WDM)		+= class/
+obj-$(CONFIG_USB_TMC)		+= class/
 
 obj-$(CONFIG_USB_STORAGE)	+= storage/
 obj-$(CONFIG_USB)		+= storage/
-- 
cgit v1.2.3


From 0f43158caddcbb110916212ebe4e39993ae70864 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Mon, 27 Apr 2009 13:22:40 -0400
Subject: USB: Gadget: fix UTF conversion in the usbstring library

This patch (as1234) fixes a bug in the UTF8 -> UTF-16 conversion
routine in the gadget/usbstring library.  In a UTF-8 multi-byte
sequence, all bytes after the first should have their high-order
two bits set to 10, not 11.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/usbstring.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 4154be375c7..58c4d37d312 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -38,7 +38,7 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
 				uchar = (c & 0x1f) << 6;
 
 				c = (u8) *s++;
-				if ((c & 0xc0) != 0xc0)
+				if ((c & 0xc0) != 0x80)
 					goto fail;
 				c &= 0x3f;
 				uchar |= c;
@@ -49,13 +49,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
 				uchar = (c & 0x0f) << 12;
 
 				c = (u8) *s++;
-				if ((c & 0xc0) != 0xc0)
+				if ((c & 0xc0) != 0x80)
 					goto fail;
 				c &= 0x3f;
 				uchar |= c << 6;
 
 				c = (u8) *s++;
-				if ((c & 0xc0) != 0xc0)
+				if ((c & 0xc0) != 0x80)
 					goto fail;
 				c &= 0x3f;
 				uchar |= c;
-- 
cgit v1.2.3


From 031defd11ee11753110098603236a4257b2cc03d Mon Sep 17 00:00:00 2001
From: Phil Dibowitz <phil@ipom.com>
Date: Sun, 26 Apr 2009 12:47:51 +0200
Subject: USB: unusual_devs: extend nokia 6288 bcd range

This patch was originaly submitted by Phillip Potter
<phillipinda@hotmail.com> but was re-diffed to conform with
SubmittingPatches and to rebase on a newer tree by me.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/storage/unusual_devs.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fa65a3b0860..4b8b69045fe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -160,8 +160,9 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Andrew Nayenko <relan@bk.ru> */
-UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0592,
+/* Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0610,
 		"Nokia",
 		"Nokia 6288",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-- 
cgit v1.2.3


From c45d63202fbaccef7ef7946c03f27f72c809b1cc Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 30 Apr 2009 10:06:19 -0400
Subject: usb-serial: ftdi_sio: fix reference counting of ftdi_private

This patch (as1238) adds proper reference counting for ftdi_sio's
private data structure.  Without it, the driver will free the
structure while it is still in use if the user unplugs the serial
device before closing the device file.

The patch also replaces a slightly dangerous
cancel_delayed_work/flush_scheduled_work pair with
cancel_delayed_work_sync, which is always safer.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Daniel Mack <daniel@caiaq.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aab567644b9..0ab8474b00c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -56,6 +56,7 @@ static __u16 vendor = FTDI_VID;
 static __u16 product;
 
 struct ftdi_private {
+	struct kref kref;
 	ftdi_chip_type_t chip_type;
 				/* type of device, either SIO or FT8U232AM */
 	int baud_base;		/* baud base clock for divisor setting */
@@ -1354,6 +1355,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 	}
 
+	kref_init(&priv->kref);
 	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->tx_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
@@ -1470,6 +1472,13 @@ static void ftdi_shutdown(struct usb_serial *serial)
 	dbg("%s", __func__);
 }
 
+static void ftdi_sio_priv_release(struct kref *k)
+{
+	struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
+
+	kfree(priv);
+}
+
 static int ftdi_sio_port_remove(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1484,7 +1493,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 	if (priv) {
 		usb_set_serial_port_data(port, NULL);
-		kfree(priv);
+		kref_put(&priv->kref, ftdi_sio_priv_release);
 	}
 
 	return 0;
@@ -1549,7 +1558,8 @@ static int ftdi_open(struct tty_struct *tty,
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
 			__func__, result);
-
+	else
+		kref_get(&priv->kref);
 
 	return result;
 } /* ftdi_open */
@@ -1591,11 +1601,11 @@ static void ftdi_close(struct tty_struct *tty,
 	mutex_unlock(&port->serial->disc_mutex);
 
 	/* cancel any scheduled reading */
-	cancel_delayed_work(&priv->rx_work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&priv->rx_work);
 
 	/* shutdown our bulk read */
 	usb_kill_urb(port->read_urb);
+	kref_put(&priv->kref, ftdi_sio_priv_release);
 } /* ftdi_close */
 
 
-- 
cgit v1.2.3


From 82fbb01cf3c2bd150262269bd017431d7dd74063 Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Thu, 16 Apr 2009 14:43:14 +0300
Subject: Staging: w35und: unregister device from the ieee80211 stack upon
 ->disconnect()

Impact: fix module removal

This patch fixes an oops when the w35und module is removed from the
kernel and added back.

Reported-by: luoyi <luoyi.ly@gmail.com>
Tested-by: Sandro Bonazzola <sandro.bonazzola@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/winbond/wbusb.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 9c3f9439f35..3b2d52819b4 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -386,7 +386,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
 	if (err)
 		goto error_free_hw;
 
-	usb_set_intfdata(intf, priv);
+	usb_set_intfdata(intf, dev);
 
 	return 0;
 
@@ -415,10 +415,15 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
 
 static void wb35_disconnect(struct usb_interface *intf)
 {
-	struct wbsoft_priv *priv = usb_get_intfdata(intf);
+	struct ieee80211_hw *hw = usb_get_intfdata(intf);
+	struct wbsoft_priv *priv = hw->priv;
 
 	wb35_hw_halt(priv);
 
+	ieee80211_stop_queues(hw);
+	ieee80211_unregister_hw(hw);
+	ieee80211_free_hw(hw);
+
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(interface_to_usbdev(intf));
 }
-- 
cgit v1.2.3


From a9ed12e5c149b05adf13bea5f1e96d68c2127faf Mon Sep 17 00:00:00 2001
From: Dave Hayes <dwhayes@gmail.com>
Date: Sat, 18 Apr 2009 02:18:37 -0500
Subject: Staging: rt2870: new device id

Hey, I have an Edimax wireless USB adapter that uses the rt2870 chipset.
lsusb shows it as follows:

Bus 001 Device 002: ID 7392:7717

When I added that ID to rt2870.h, the device came up and worked as
expected.

From: Dave Hayes <dwhayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rt2870/rt2870.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index a42caa37080..a69cf338e49 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -145,6 +145,7 @@
 	{USB_DEVICE(0x0789,0x0162)}, /* Logitec */		\
 	{USB_DEVICE(0x0789,0x0163)}, /* Logitec */		\
 	{USB_DEVICE(0x0789,0x0164)}, /* Logitec */		\
+	{USB_DEVICE(0x7392,0x7717)}, /* Edimax */		\
 	{ }/* Terminating entry */                      \
 }
 
-- 
cgit v1.2.3


From be286fd229e95658516ddf880054ea3c9ad9bb34 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 18 Apr 2009 21:09:08 -0500
Subject: Staging: rtl8187se: Fix compilation warnings and procfs directory
 leak

Fix some warnings during compilation and correct a programming error
that was leaking a directory in /proc.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rtl8187se/r8180.h      |  2 +-
 drivers/staging/rtl8187se/r8180_core.c | 46 ++++++----------------------------
 2 files changed, 9 insertions(+), 39 deletions(-)

diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index 12215fc61dd..db446b7e2e0 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -19,7 +19,7 @@
 #define R8180H
 
 
-#define RTL8180_MODULE_NAME "rtl8180"
+#define RTL8180_MODULE_NAME "r8180"
 #define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
 #define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
 #define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 6ecd12de429..e10413cee0d 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -640,11 +640,9 @@ void rtl8180_proc_init_one(struct net_device *dev)
 {
 	struct proc_dir_entry *e;
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	priv->dir_dev = create_proc_entry(dev->name,
-					  S_IFDIR | S_IRUGO | S_IXUGO,
-					  rtl8180_proc);
+	priv->dir_dev = rtl8180_proc;
 	if (!priv->dir_dev) {
-		DMESGE("Unable to initialize /proc/net/rtl8180/%s\n",
+		DMESGE("Unable to initialize /proc/net/r8180/%s\n",
 		      dev->name);
 		return;
 	}
@@ -654,7 +652,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-hw\n",
+		      "/proc/net/r8180/%s/stats-hw\n",
 		      dev->name);
 	}
 
@@ -663,7 +661,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-rx\n",
+		      "/proc/net/r8180/%s/stats-rx\n",
 		      dev->name);
 	}
 
@@ -673,7 +671,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/stats-tx\n",
+		      "/proc/net/r8180/%s/stats-tx\n",
 		      dev->name);
 	}
 	#if 0
@@ -702,7 +700,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
 
 	if (!e) {
 		DMESGE("Unable to initialize "
-		      "/proc/net/rtl8180/%s/registers\n",
+		      "/proc/net/r8180/%s/registers\n",
 		      dev->name);
 	}
 }
@@ -977,13 +975,6 @@ void check_tx_ring(struct net_device *dev, int pri)
 			      *tmp & (1<<15)? "ok": "err", *(tmp+4));
 	}
 
-	DMESG("nic at %d",
-		(nic-nicbegin) / 8 /4);
-	DMESG("tail at %d", ((int)tail - (int)begin) /8 /4);
-	DMESG("head at %d", ((int)head - (int)begin) /8 /4);
-	DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri));
-	DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri));
-	//rtl8180_reset(dev);
 	return;
 }
 
@@ -1736,17 +1727,7 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
 		 * descriptor's buffer must be 256 byte aligned
 		 * we shouldn't be here, since we set DMA mask !
 		 */
-		DMESGW("Fixing TX alignment");
-		desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
-		desc = (u32*)((u64)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
-		desc = (u32*)((u32)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+		WARN(1, "DMA buffer is not aligned\n");
 	}
 	tmp=desc;
 	for (i=0;i<count;i++)
@@ -1984,18 +1965,7 @@ short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count)
 		 * descriptor's buffer must be 256 byte aligned
 		 * should never happen since we specify the DMA mask
 		 */
-
-		DMESGW("Fixing RX alignment");
-		desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
-		desc = (u32*)((u64)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
-		desc = (u32*)((u32)desc &~ 0xff);
-		dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
-		dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+		WARN(1, "DMA buffer is not aligned\n");
 	}
 
 	priv->rxring=desc;
-- 
cgit v1.2.3


From ca9fc928788a02a0fe975dc3334e6d7ec521b6af Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 24 Apr 2009 17:04:44 -0700
Subject: Staging: comedi: David doesn't want to get comedi patches

He's long moved on from the project.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/comedi/TODO | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/staging/comedi/TODO b/drivers/staging/comedi/TODO
index 55781295846..15c9348fb93 100644
--- a/drivers/staging/comedi/TODO
+++ b/drivers/staging/comedi/TODO
@@ -11,4 +11,3 @@ Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
 copy:
 	Ian Abbott <abbotti@mev.co.uk>
 	Frank Mori Hess <fmhess@users.sourceforge.net>
-	David Schleef <ds@schleef.org>
-- 
cgit v1.2.3


From 85c2a74fabadfc561b75fbd7decc6bcbfe873d57 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Tue, 28 Apr 2009 23:38:46 +0900
Subject: nilfs2: fix possible recovery failure due to block creation without
 writer

Some function calls in nilfs_prepare_segment_for_recovery() may fail
because they can create blocks on meta data files without configuring
a writable FS-instance.  Concretely, nilfs_mdt_create_block() routine
of meta data files will fail in that case.

This fixes the problem by temporarily attaching a writable FS-instace
during the function is called.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/recovery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index 4fc081e47d7..57afa9d2406 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -407,6 +407,7 @@ void nilfs_dispose_segment_list(struct list_head *head)
 }
 
 static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
+					      struct nilfs_sb_info *sbi,
 					      struct nilfs_recovery_info *ri)
 {
 	struct list_head *head = &ri->ri_used_segments;
@@ -421,6 +422,7 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	segnum[2] = ri->ri_segnum;
 	segnum[3] = ri->ri_nextnum;
 
+	nilfs_attach_writer(nilfs, sbi);
 	/*
 	 * Releasing the next segment of the latest super root.
 	 * The next segment is invalidated by this recovery.
@@ -459,10 +461,10 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	nilfs->ns_pseg_offset = 0;
 	nilfs->ns_seg_seq = ri->ri_seq + 2;
 	nilfs->ns_nextnum = nilfs->ns_segnum = segnum[0];
-	return 0;
 
  failed:
 	/* No need to recover sufile because it will be destroyed on error */
+	nilfs_detach_writer(nilfs, sbi);
 	return err;
 }
 
@@ -728,7 +730,7 @@ int nilfs_recover_logical_segments(struct the_nilfs *nilfs,
 		goto failed;
 
 	if (ri->ri_need_recovery == NILFS_RECOVERY_ROLLFORWARD_DONE) {
-		err = nilfs_prepare_segment_for_recovery(nilfs, ri);
+		err = nilfs_prepare_segment_for_recovery(nilfs, sbi, ri);
 		if (unlikely(err)) {
 			printk(KERN_ERR "NILFS: Error preparing segments for "
 			       "recovery.\n");
-- 
cgit v1.2.3


From 201913ed746c7724a40d33ee5a0b6a1fd2ef3193 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Tue, 28 Apr 2009 21:04:59 +0900
Subject: nilfs2: fix circular locking dependency of writer mutex

This fixes the following circular locking dependency problem:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3 #5
 -------------------------------------------------------
 segctord/3895 is trying to acquire lock:
  (&nilfs->ns_writer_mutex){+.+...}, at: [<d0d02172>]
   nilfs_mdt_get_block+0x89/0x20f [nilfs2]

 but task is already holding lock:
  (&bmap->b_sem){++++..}, at: [<d0d02d99>]
   nilfs_bmap_propagate+0x14/0x2e [nilfs2]

 which lock already depends on the new lock.

The bugfix is done by replacing call sites of nilfs_get_writer() which
are never called from read-only context with direct dereferencing of
pointer to a writable FS-instance.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c |  8 +++++---
 fs/nilfs2/mdt.c   | 13 +++++++------
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 108d281ebca..be387c6b2d4 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -516,14 +516,16 @@ static ssize_t
 nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			     void *buf, size_t size, size_t nmembs)
 {
-	struct nilfs_sb_info *sbi = nilfs_get_writer(nilfs);
+	struct nilfs_sb_info *sbi = nilfs->ns_writer;
 	int ret;
 
-	if (unlikely(!sbi))
+	if (unlikely(!sbi)) {
+		/* never happens because called for a writable mount */
+		WARN_ON(1);
 		return -EROFS;
+	}
 	ret = nilfs_segctor_add_segments_to_be_freed(
 		NILFS_SC(sbi), buf, nmembs);
-	nilfs_put_writer(nilfs);
 
 	return (ret < 0) ? ret : nmembs;
 }
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 47dd815433f..e1c6777931b 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -77,19 +77,22 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block,
 						     void *))
 {
 	struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs;
-	struct nilfs_sb_info *writer = NULL;
 	struct super_block *sb = inode->i_sb;
 	struct nilfs_transaction_info ti;
 	struct buffer_head *bh;
 	int err;
 
 	if (!sb) {
-		writer = nilfs_get_writer(nilfs);
-		if (!writer) {
+		/*
+		 * Make sure this function is not called from any
+		 * read-only context.
+		 */
+		if (!nilfs->ns_writer) {
+			WARN_ON(1);
 			err = -EROFS;
 			goto out;
 		}
-		sb = writer->s_super;
+		sb = nilfs->ns_writer->s_super;
 	}
 
 	nilfs_transaction_begin(sb, &ti, 0);
@@ -127,8 +130,6 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block,
 		err = nilfs_transaction_commit(sb);
 	else
 		nilfs_transaction_abort(sb);
-	if (writer)
-		nilfs_put_writer(nilfs);
  out:
 	return err;
 }
-- 
cgit v1.2.3


From 92d23f703c608fcb2c8edd74a3fd0f4031e18606 Mon Sep 17 00:00:00 2001
From: Ron <ron@voicetronix.com>
Date: Fri, 8 May 2009 22:54:49 +0930
Subject: sched: Fix fallback sched_clock()'s offset when using jiffies

Account for the initial offset to the jiffy count.

[ Impact: fix printk timestamps on architectures using fallback sched_clock() ]

Signed-off-by: Ron Lee <ron@debian.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_clock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 819f17ac796..e1d16c9a768 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -38,7 +38,8 @@
  */
 unsigned long long __attribute__((weak)) sched_clock(void)
 {
-	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+	return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+					* (NSEC_PER_SEC / HZ);
 }
 
 static __read_mostly int sched_clock_running;
-- 
cgit v1.2.3


From 3ba8c7920552865a338e00512715786b54db4da0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Tue, 28 Apr 2009 14:54:07 +0200
Subject: IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.
 ENOSYS makes modutils complain about missing kernel module support.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/ixp4xx_npe.c | 2 +-
 drivers/net/arm/ixp4xx_eth.c      | 6 +++---
 drivers/net/wan/ixp4xx_hss.c      | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 25231023490..7bb8e778e4b 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
 	}
 
 	if (!found)
-		return -ENOSYS;
+		return -ENODEV;
 	return 0;
 }
 
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 448487e22fa..721b5421bf1 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -338,12 +338,12 @@ static int ixp4xx_mdio_register(void)
 	if (cpu_is_ixp43x()) {
 		/* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
 		if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
-			return -ENOSYS;
+			return -ENODEV;
 		mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
 	} else {
 		/* All MII PHY accesses use NPE-B Ethernet registers */
 		if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-			return -ENOSYS;
+			return -ENODEV;
 		mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
 	}
 
@@ -1174,7 +1174,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 		regs_phys  = IXP4XX_EthC_BASE_PHYS;
 		break;
 	default:
-		err = -ENOSYS;
+		err = -ENODEV;
 		goto err_free;
 	}
 
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 3bf7d3f447d..765a7f5d6aa 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -1249,7 +1249,7 @@ static int __devinit hss_init_one(struct platform_device *pdev)
 		return -ENOMEM;
 
 	if ((port->npe = npe_request(0)) == NULL) {
-		err = -ENOSYS;
+		err = -ENODEV;
 		goto err_free;
 	}
 
@@ -1311,7 +1311,7 @@ static int __init hss_init_module(void)
 	if ((ixp4xx_read_feature_bits() &
 	     (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
 	    (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
-		return -ENOSYS;
+		return -ENODEV;
 
 	spin_lock_init(&npe_lock);
 
-- 
cgit v1.2.3


From 7aa6a4786e70fe826b998d1f95ba911a28546844 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Mon, 4 May 2009 21:31:52 +0200
Subject: IXP4xx: complete Ethernet netdev setup before calling
 register_netdev().
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 drivers/net/arm/ixp4xx_eth.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 721b5421bf1..a740053d3af 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -1189,15 +1189,10 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 		goto err_free;
 	}
 
-	if (register_netdev(dev)) {
-		err = -EIO;
-		goto err_npe_rel;
-	}
-
 	port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
 	if (!port->mem_res) {
 		err = -EBUSY;
-		goto err_unreg;
+		goto err_npe_rel;
 	}
 
 	port->plat = plat;
@@ -1215,20 +1210,25 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 	snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy);
 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
 				   PHY_INTERFACE_MODE_MII);
-	if (IS_ERR(port->phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(port->phydev);
-	}
+	if ((err = IS_ERR(port->phydev)))
+		goto err_free_mem;
 
 	port->phydev->irq = PHY_POLL;
 
+	if ((err = register_netdev(dev)))
+		goto err_phy_dis;
+
 	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
 	       npe_name(port->npe));
 
 	return 0;
 
-err_unreg:
-	unregister_netdev(dev);
+err_phy_dis:
+	phy_disconnect(port->phydev);
+err_free_mem:
+	npe_port_tab[NPE_ID(port->id)] = NULL;
+	platform_set_drvdata(pdev, NULL);
+	release_resource(port->mem_res);
 err_npe_rel:
 	npe_release(port->npe);
 err_free:
@@ -1242,6 +1242,7 @@ static int __devexit eth_remove_one(struct platform_device *pdev)
 	struct port *port = netdev_priv(dev);
 
 	unregister_netdev(dev);
+	phy_disconnect(port->phydev);
 	npe_port_tab[NPE_ID(port->id)] = NULL;
 	platform_set_drvdata(pdev, NULL);
 	npe_release(port->npe);
-- 
cgit v1.2.3


From 0c7a531a200480c7bc447260376973d830da9069 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 30 Apr 2009 14:52:58 +0100
Subject: GFS2: Fix glock ref counting bug

Depending on the ordering of events as we go around the
glock shrinker loop, it is possible to drop the ref count
of a glock incorrectly. It doesn't happen very often. This
patch corrects the got_ref variable, fixing the problem.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/glock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 1afd9f26bcb..ff498109048 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1304,6 +1304,7 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
 				nr--;
 				if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 					gfs2_glock_put(gl);
+				got_ref = 0;
 			}
 			spin_lock(&lru_lock);
 			if (may_demote)
-- 
cgit v1.2.3


From 67e55205ec55cc7899f1d783f217961596798419 Mon Sep 17 00:00:00 2001
From: Alessio Igor Bogani <abogani@texware.it>
Date: Fri, 24 Apr 2009 09:06:53 +0200
Subject: vfs: umount_begin BKL pushdown

Push BKL down into ->umount_begin()

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/9p/vfs_super.c | 6 +++++-
 fs/cifs/cifsfs.c  | 3 +++
 fs/fuse/inode.c   | 3 +++
 fs/namespace.c    | 2 --
 fs/nfs/super.c    | 7 ++++++-
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 5f8ab8adb5f..7d23214e559 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -37,6 +37,7 @@
 #include <linux/mount.h>
 #include <linux/idr.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <net/9p/9p.h>
 #include <net/9p/client.h>
 
@@ -230,9 +231,12 @@ static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt)
 static void
 v9fs_umount_begin(struct super_block *sb)
 {
-	struct v9fs_session_info *v9ses = sb->s_fs_info;
+	struct v9fs_session_info *v9ses;
 
+	lock_kernel();
+	v9ses = sb->s_fs_info;
 	v9fs_session_cancel(v9ses);
+	unlock_kernel();
 }
 
 static const struct super_operations v9fs_super_ops = {
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d6d8b57365..355e0efec0c 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/smp_lock.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #define DECLARE_GLOBALS_HERE
@@ -530,6 +531,7 @@ static void cifs_umount_begin(struct super_block *sb)
 	if (tcon == NULL)
 		return;
 
+	lock_kernel();
 	read_lock(&cifs_tcp_ses_lock);
 	if (tcon->tc_count == 1)
 		tcon->tidStatus = CifsExiting;
@@ -548,6 +550,7 @@ static void cifs_umount_begin(struct super_block *sb)
 	}
 /* BB FIXME - finish add checks for tidStatus BB */
 
+	unlock_kernel();
 	return;
 }
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 459b73dd45e..d1bc4d33ccb 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -19,6 +19,7 @@
 #include <linux/random.h>
 #include <linux/sched.h>
 #include <linux/exportfs.h>
+#include <linux/smp_lock.h>
 
 MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
 MODULE_DESCRIPTION("Filesystem in Userspace");
@@ -259,7 +260,9 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
 
 static void fuse_umount_begin(struct super_block *sb)
 {
+	lock_kernel();
 	fuse_abort_conn(get_fuse_conn_super(sb));
+	unlock_kernel();
 }
 
 static void fuse_send_destroy(struct fuse_conn *fc)
diff --git a/fs/namespace.c b/fs/namespace.c
index 41196209a90..0d2003fb437 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1073,9 +1073,7 @@ static int do_umount(struct vfsmount *mnt, int flags)
 	 */
 
 	if (flags & MNT_FORCE && sb->s_op->umount_begin) {
-		lock_kernel();
 		sb->s_op->umount_begin(sb);
-		unlock_kernel();
 	}
 
 	/*
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 6717200923f..1679a164c8c 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -683,9 +683,12 @@ static int nfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
  */
 static void nfs_umount_begin(struct super_block *sb)
 {
-	struct nfs_server *server = NFS_SB(sb);
+	struct nfs_server *server;
 	struct rpc_clnt *rpc;
 
+	lock_kernel();
+
+	server = NFS_SB(sb);
 	/* -EIO all pending I/O */
 	rpc = server->client_acl;
 	if (!IS_ERR(rpc))
@@ -693,6 +696,8 @@ static void nfs_umount_begin(struct super_block *sb)
 	rpc = server->client;
 	if (!IS_ERR(rpc))
 		rpc_killall_tasks(rpc);
+
+	unlock_kernel();
 }
 
 /*
-- 
cgit v1.2.3


From 5a6059c358d3b3004cb6b8562e3b049b1f8564f9 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Fri, 1 May 2009 12:11:12 -0400
Subject: reiserfs: Expand i_mutex to enclose lookup_one_len

 2.6.30-rc3 introduced some sanity checks in the VFS code to avoid NFS
 bugs by ensuring that lookup_one_len is always called under i_mutex.

 This patch expands the i_mutex locking to enclose lookup_one_len. This was
 always required, but not not enforced in the reiserfs code since it
 does locking around the xattr interactions with the xattr_sem.

 This is obvious enough, and it survived an overnight 50 thread ACL test.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/xattr.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index f83f52bae39..31a3dbb120e 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -120,25 +120,20 @@ static struct dentry *lookup_or_create_dir(struct dentry *parent,
 	struct dentry *dentry;
 	BUG_ON(!parent);
 
+	mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_XATTR);
 	dentry = lookup_one_len(name, parent, strlen(name));
-	if (IS_ERR(dentry))
-		return dentry;
-	else if (!dentry->d_inode) {
+	if (!IS_ERR(dentry) && !dentry->d_inode) {
 		int err = -ENODATA;
 
-		if (xattr_may_create(flags)) {
-			mutex_lock_nested(&parent->d_inode->i_mutex,
-					  I_MUTEX_XATTR);
+		if (xattr_may_create(flags))
 			err = xattr_mkdir(parent->d_inode, dentry, 0700);
-			mutex_unlock(&parent->d_inode->i_mutex);
-		}
 
 		if (err) {
 			dput(dentry);
 			dentry = ERR_PTR(err);
 		}
 	}
-
+	mutex_unlock(&parent->d_inode->i_mutex);
 	return dentry;
 }
 
@@ -184,6 +179,7 @@ fill_with_dentries(void *buf, const char *name, int namelen, loff_t offset,
 {
 	struct reiserfs_dentry_buf *dbuf = buf;
 	struct dentry *dentry;
+	WARN_ON_ONCE(!mutex_is_locked(&dbuf->xadir->d_inode->i_mutex));
 
 	if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
 		return -ENOSPC;
@@ -349,6 +345,7 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name,
 	if (IS_ERR(xadir))
 		return ERR_CAST(xadir);
 
+	mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
 	xafile = lookup_one_len(name, xadir, strlen(name));
 	if (IS_ERR(xafile)) {
 		err = PTR_ERR(xafile);
@@ -360,18 +357,15 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name,
 
 	if (!xafile->d_inode) {
 		err = -ENODATA;
-		if (xattr_may_create(flags)) {
-			mutex_lock_nested(&xadir->d_inode->i_mutex,
-					  I_MUTEX_XATTR);
+		if (xattr_may_create(flags))
 			err = xattr_create(xadir->d_inode, xafile,
 					      0700|S_IFREG);
-			mutex_unlock(&xadir->d_inode->i_mutex);
-		}
 	}
 
 	if (err)
 		dput(xafile);
 out:
+	mutex_unlock(&xadir->d_inode->i_mutex);
 	dput(xadir);
 	if (err)
 		return ERR_PTR(err);
@@ -435,6 +429,7 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name)
 	if (IS_ERR(xadir))
 		return PTR_ERR(xadir);
 
+	mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
 	dentry = lookup_one_len(name, xadir, strlen(name));
 	if (IS_ERR(dentry)) {
 		err = PTR_ERR(dentry);
@@ -442,14 +437,13 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name)
 	}
 
 	if (dentry->d_inode) {
-		mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
 		err = xattr_unlink(xadir->d_inode, dentry);
-		mutex_unlock(&xadir->d_inode->i_mutex);
 		update_ctime(inode);
 	}
 
 	dput(dentry);
 out_dput:
+	mutex_unlock(&xadir->d_inode->i_mutex);
 	dput(xadir);
 	return err;
 }
@@ -906,9 +900,9 @@ static int create_privroot(struct dentry *dentry)
 {
 	int err;
 	struct inode *inode = dentry->d_parent->d_inode;
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
+	WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+
 	err = xattr_mkdir(inode, dentry, 0700);
-	mutex_unlock(&inode->i_mutex);
 	if (err) {
 		dput(dentry);
 		dentry = NULL;
@@ -980,6 +974,7 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 	/* If we don't have the privroot located yet - go find it */
 	if (!REISERFS_SB(s)->priv_root) {
 		struct dentry *dentry;
+		mutex_lock_nested(&s->s_root->d_inode->i_mutex, I_MUTEX_CHILD);
 		dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
 					strlen(PRIVROOT_NAME));
 		if (!IS_ERR(dentry)) {
@@ -993,6 +988,7 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 			}
 		} else
 			err = PTR_ERR(dentry);
+		mutex_unlock(&s->s_root->d_inode->i_mutex);
 
 		if (!err && dentry) {
 			s->s_root->d_op = &xattr_lookup_poison_ops;
-- 
cgit v1.2.3


From edcc37a0478836b4a51eafb1bcec6a52708f681d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 3 May 2009 06:00:05 -0400
Subject: Always lookup priv_root on reiserfs mount and keep it

... even if it's a negative dentry.  That way we can set ->d_op on
root before anyone could race with us.  Simplify d_compare(), while
we are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/super.c            |  6 ++-
 fs/reiserfs/xattr.c            | 86 ++++++++++++++++++------------------------
 include/linux/reiserfs_xattr.h |  1 +
 3 files changed, 41 insertions(+), 52 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 0ae6486d904..d444fe0013a 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1842,7 +1842,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 			goto error;
 		}
 
-		if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+		if ((errval = reiserfs_lookup_privroot(s)) ||
+		    (errval = reiserfs_xattr_init(s, s->s_flags))) {
 			dput(s->s_root);
 			s->s_root = NULL;
 			goto error;
@@ -1855,7 +1856,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 			reiserfs_info(s, "using 3.5.x disk format\n");
 		}
 
-		if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+		if ((errval = reiserfs_lookup_privroot(s)) ||
+		    (errval = reiserfs_xattr_init(s, s->s_flags))) {
 			dput(s->s_root);
 			s->s_root = NULL;
 			goto error;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 31a3dbb120e..2891f789f54 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -903,16 +903,19 @@ static int create_privroot(struct dentry *dentry)
 	WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
 
 	err = xattr_mkdir(inode, dentry, 0700);
-	if (err) {
-		dput(dentry);
-		dentry = NULL;
+	if (err || !dentry->d_inode) {
+		reiserfs_warning(dentry->d_sb, "jdm-20006",
+				 "xattrs/ACLs enabled and couldn't "
+				 "find/create .reiserfs_priv. "
+				 "Failing mount.");
+		return -EOPNOTSUPP;
 	}
 
-	if (dentry && dentry->d_inode)
-		reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
-			      "storage.\n", PRIVROOT_NAME);
+	dentry->d_inode->i_flags |= S_PRIVATE;
+	reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
+		      "storage.\n", PRIVROOT_NAME);
 
-	return err;
+	return 0;
 }
 
 static int xattr_mount_check(struct super_block *s)
@@ -944,11 +947,9 @@ static int
 xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
 {
 	struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root;
-	if (name->len == priv_root->d_name.len &&
-	    name->hash == priv_root->d_name.hash &&
-	    !memcmp(name->name, priv_root->d_name.name, name->len)) {
+	if (container_of(q1, struct dentry, d_name) == priv_root)
 		return -ENOENT;
-	} else if (q1->len == name->len &&
+	if (q1->len == name->len &&
 		   !memcmp(q1->name, name->name, name->len))
 		return 0;
 	return 1;
@@ -958,6 +959,27 @@ static const struct dentry_operations xattr_lookup_poison_ops = {
 	.d_compare = xattr_lookup_poison,
 };
 
+int reiserfs_lookup_privroot(struct super_block *s)
+{
+	struct dentry *dentry;
+	int err = 0;
+
+	/* If we don't have the privroot located yet - go find it */
+	mutex_lock(&s->s_root->d_inode->i_mutex);
+	dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
+				strlen(PRIVROOT_NAME));
+	if (!IS_ERR(dentry)) {
+		REISERFS_SB(s)->priv_root = dentry;
+		s->s_root->d_op = &xattr_lookup_poison_ops;
+		if (dentry->d_inode)
+			dentry->d_inode->i_flags |= S_PRIVATE;
+	} else
+		err = PTR_ERR(dentry);
+	mutex_unlock(&s->s_root->d_inode->i_mutex);
+
+	return err;
+}
+
 /* We need to take a copy of the mount flags since things like
  * MS_RDONLY don't get set until *after* we're called.
  * mount_flags != mount_options */
@@ -969,48 +991,12 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 	err = xattr_mount_check(s);
 	if (err)
 		goto error;
-#endif
 
-	/* If we don't have the privroot located yet - go find it */
-	if (!REISERFS_SB(s)->priv_root) {
-		struct dentry *dentry;
-		mutex_lock_nested(&s->s_root->d_inode->i_mutex, I_MUTEX_CHILD);
-		dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
-					strlen(PRIVROOT_NAME));
-		if (!IS_ERR(dentry)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
-			if (!(mount_flags & MS_RDONLY) && !dentry->d_inode)
-				err = create_privroot(dentry);
-#endif
-			if (!dentry->d_inode) {
-				dput(dentry);
-				dentry = NULL;
-			}
-		} else
-			err = PTR_ERR(dentry);
+	if (!REISERFS_SB(s)->priv_root->d_inode && !(mount_flags & MS_RDONLY)) {
+		mutex_lock(&s->s_root->d_inode->i_mutex);
+		err = create_privroot(REISERFS_SB(s)->priv_root);
 		mutex_unlock(&s->s_root->d_inode->i_mutex);
-
-		if (!err && dentry) {
-			s->s_root->d_op = &xattr_lookup_poison_ops;
-			dentry->d_inode->i_flags |= S_PRIVATE;
-			REISERFS_SB(s)->priv_root = dentry;
-#ifdef CONFIG_REISERFS_FS_XATTR
-		/* xattrs are unavailable */
-		} else if (!(mount_flags & MS_RDONLY)) {
-			/* If we're read-only it just means that the dir
-			 * hasn't been created. Not an error -- just no
-			 * xattrs on the fs. We'll check again if we
-			 * go read-write */
-			reiserfs_warning(s, "jdm-20006",
-					 "xattrs/ACLs enabled and couldn't "
-					 "find/create .reiserfs_priv. "
-					 "Failing mount.");
-			err = -EOPNOTSUPP;
-#endif
-		}
 	}
-
-#ifdef CONFIG_REISERFS_FS_XATTR
 	if (!err)
 		s->s_xattr = reiserfs_xattr_handlers;
 
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index dcae01e63e4..fea1a8e65be 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -38,6 +38,7 @@ struct nameidata;
 int reiserfs_xattr_register_handlers(void) __init;
 void reiserfs_xattr_unregister_handlers(void);
 int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
+int reiserfs_lookup_privroot(struct super_block *sb);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
 
-- 
cgit v1.2.3


From ab17c4f02156c4f75d7fa43a5aa2a7f942d47201 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Tue, 5 May 2009 15:30:15 -0400
Subject: reiserfs: fixup xattr_root caching

 The xattr_root caching was broken from my previous patch set. It wouldn't
 cause corruption, but could cause decreased performance due to allocating
 a larger chunk of the journal (~ 27 blocks) than it would actually use.

 This patch loads the xattr root dentry at xattr initialization and creates
 it on-demand. Since we're using the cached dentry, there's no point
 in keeping lookup_or_create_dir around, so that's removed.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/xattr.c            | 73 ++++++++++++++++++++++++++----------------
 include/linux/reiserfs_fs_sb.h |  2 +-
 include/linux/reiserfs_xattr.h |  2 +-
 3 files changed, 48 insertions(+), 29 deletions(-)

diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 2891f789f54..c77984473db 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -113,36 +113,28 @@ static int xattr_rmdir(struct inode *dir, struct dentry *dentry)
 
 #define xattr_may_create(flags)	(!flags || flags & XATTR_CREATE)
 
-/* Returns and possibly creates the xattr dir. */
-static struct dentry *lookup_or_create_dir(struct dentry *parent,
-					    const char *name, int flags)
+static struct dentry *open_xa_root(struct super_block *sb, int flags)
 {
-	struct dentry *dentry;
-	BUG_ON(!parent);
+	struct dentry *privroot = REISERFS_SB(sb)->priv_root;
+	struct dentry *xaroot;
+	if (!privroot->d_inode)
+		return ERR_PTR(-ENODATA);
 
-	mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_XATTR);
-	dentry = lookup_one_len(name, parent, strlen(name));
-	if (!IS_ERR(dentry) && !dentry->d_inode) {
-		int err = -ENODATA;
+	mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
 
+	xaroot = dget(REISERFS_SB(sb)->xattr_root);
+	if (!xaroot->d_inode) {
+		int err = -ENODATA;
 		if (xattr_may_create(flags))
-			err = xattr_mkdir(parent->d_inode, dentry, 0700);
-
+			err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
 		if (err) {
-			dput(dentry);
-			dentry = ERR_PTR(err);
+			dput(xaroot);
+			xaroot = ERR_PTR(err);
 		}
 	}
-	mutex_unlock(&parent->d_inode->i_mutex);
-	return dentry;
-}
 
-static struct dentry *open_xa_root(struct super_block *sb, int flags)
-{
-	struct dentry *privroot = REISERFS_SB(sb)->priv_root;
-	if (!privroot)
-		return ERR_PTR(-ENODATA);
-	return lookup_or_create_dir(privroot, XAROOT_NAME, flags);
+	mutex_unlock(&privroot->d_inode->i_mutex);
+	return xaroot;
 }
 
 static struct dentry *open_xa_dir(const struct inode *inode, int flags)
@@ -158,10 +150,22 @@ static struct dentry *open_xa_dir(const struct inode *inode, int flags)
 		 le32_to_cpu(INODE_PKEY(inode)->k_objectid),
 		 inode->i_generation);
 
-	xadir = lookup_or_create_dir(xaroot, namebuf, flags);
+	mutex_lock_nested(&xaroot->d_inode->i_mutex, I_MUTEX_XATTR);
+
+	xadir = lookup_one_len(namebuf, xaroot, strlen(namebuf));
+	if (!IS_ERR(xadir) && !xadir->d_inode) {
+		int err = -ENODATA;
+		if (xattr_may_create(flags))
+			err = xattr_mkdir(xaroot->d_inode, xadir, 0700);
+		if (err) {
+			dput(xadir);
+			xadir = ERR_PTR(err);
+		}
+	}
+
+	mutex_unlock(&xaroot->d_inode->i_mutex);
 	dput(xaroot);
 	return xadir;
-
 }
 
 /* The following are side effects of other operations that aren't explicitly
@@ -986,19 +990,33 @@ int reiserfs_lookup_privroot(struct super_block *s)
 int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 {
 	int err = 0;
+	struct dentry *privroot = REISERFS_SB(s)->priv_root;
 
 #ifdef CONFIG_REISERFS_FS_XATTR
 	err = xattr_mount_check(s);
 	if (err)
 		goto error;
 
-	if (!REISERFS_SB(s)->priv_root->d_inode && !(mount_flags & MS_RDONLY)) {
+	if (!privroot->d_inode && !(mount_flags & MS_RDONLY)) {
 		mutex_lock(&s->s_root->d_inode->i_mutex);
 		err = create_privroot(REISERFS_SB(s)->priv_root);
 		mutex_unlock(&s->s_root->d_inode->i_mutex);
 	}
-	if (!err)
+
+	if (privroot->d_inode) {
 		s->s_xattr = reiserfs_xattr_handlers;
+		mutex_lock(&privroot->d_inode->i_mutex);
+		if (!REISERFS_SB(s)->xattr_root) {
+			struct dentry *dentry;
+			dentry = lookup_one_len(XAROOT_NAME, privroot,
+						strlen(XAROOT_NAME));
+			if (!IS_ERR(dentry))
+				REISERFS_SB(s)->xattr_root = dentry;
+			else
+				err = PTR_ERR(dentry);
+		}
+		mutex_unlock(&privroot->d_inode->i_mutex);
+	}
 
 error:
 	if (err) {
@@ -1008,11 +1026,12 @@ error:
 #endif
 
 	/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
-	s->s_flags = s->s_flags & ~MS_POSIXACL;
 #ifdef CONFIG_REISERFS_FS_POSIX_ACL
 	if (reiserfs_posixacl(s))
 		s->s_flags |= MS_POSIXACL;
+	else
 #endif
+		s->s_flags &= ~MS_POSIXACL;
 
 	return err;
 }
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 6b361d23a49..8651640868a 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -402,7 +402,7 @@ struct reiserfs_sb_info {
 	int reserved_blocks;	/* amount of blocks reserved for further allocations */
 	spinlock_t bitmap_lock;	/* this lock on now only used to protect reserved_blocks variable */
 	struct dentry *priv_root;	/* root of /.reiserfs_priv */
-	struct dentry *xattr_root;	/* root of /.reiserfs_priv/.xa */
+	struct dentry *xattr_root;	/* root of /.reiserfs_priv/xattrs */
 	int j_errno;
 #ifdef CONFIG_QUOTA
 	char *s_qf_names[MAXQUOTAS];
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index fea1a8e65be..cdedc01036e 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -98,7 +98,7 @@ static inline size_t reiserfs_xattr_jcreate_nblocks(struct inode *inode)
 
 	if ((REISERFS_I(inode)->i_flags & i_has_xattr_dir) == 0) {
 		nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
-		if (REISERFS_SB(inode->i_sb)->xattr_root == NULL)
+		if (!REISERFS_SB(inode->i_sb)->xattr_root->d_inode)
 			nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
 	}
 
-- 
cgit v1.2.3


From b82bb72ba7df473461c5e2368a4e7497c8ce76e9 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Tue, 5 May 2009 15:30:16 -0400
Subject: reiserfs: dont associate security.* with xattr files

 The security.* xattrs are ignored for xattr files, so don't create them.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/xattr_security.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c
index 4d3c20e787c..a92c8792c0f 100644
--- a/fs/reiserfs/xattr_security.c
+++ b/fs/reiserfs/xattr_security.c
@@ -55,8 +55,16 @@ int reiserfs_security_init(struct inode *dir, struct inode *inode,
 			   struct reiserfs_security_handle *sec)
 {
 	int blocks = 0;
-	int error = security_inode_init_security(inode, dir, &sec->name,
-						 &sec->value, &sec->length);
+	int error;
+
+	sec->name = NULL;
+
+	/* Don't add selinux attributes on xattrs - they'll never get used */
+	if (IS_PRIVATE(dir))
+		return 0;
+
+	error = security_inode_init_security(inode, dir, &sec->name,
+					     &sec->value, &sec->length);
 	if (error) {
 		if (error == -EOPNOTSUPP)
 			error = 0;
-- 
cgit v1.2.3


From 677c9b2e393a0cd203bd54e9c18b012b2c73305a Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Tue, 5 May 2009 15:30:17 -0400
Subject: reiserfs: remove privroot hiding in lookup

 With Al Viro's patch to move privroot lookup to fs mount, there's no need
 to have special code to hide the privroot in reiserfs_lookup.

 I've also cleaned up the privroot hiding in reiserfs_readdir_dentry and
 removed the last user of reiserfs_xattrs().

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/reiserfs/dir.c              | 24 +++++++++++++-----------
 fs/reiserfs/namei.c            | 17 ++---------------
 fs/reiserfs/xattr.c            |  2 +-
 include/linux/reiserfs_fs_sb.h |  1 -
 4 files changed, 16 insertions(+), 28 deletions(-)

diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 67a80d7e59e..45ee3d357c7 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -41,6 +41,18 @@ static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
 
 #define store_ih(where,what) copy_item_head (where, what)
 
+static inline bool is_privroot_deh(struct dentry *dir,
+				   struct reiserfs_de_head *deh)
+{
+	int ret = 0;
+#ifdef CONFIG_REISERFS_FS_XATTR
+	struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
+	ret = (dir == dir->d_parent && privroot->d_inode &&
+	       deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
+#endif
+	return ret;
+}
+
 int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
 			   filldir_t filldir, loff_t *pos)
 {
@@ -138,18 +150,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
 				}
 
 				/* Ignore the .reiserfs_priv entry */
-				if (reiserfs_xattrs(inode->i_sb) &&
-				    !old_format_only(inode->i_sb) &&
-				    dentry == inode->i_sb->s_root &&
-				    REISERFS_SB(inode->i_sb)->priv_root &&
-				    REISERFS_SB(inode->i_sb)->priv_root->d_inode
-				    && deh_objectid(deh) ==
-				    le32_to_cpu(INODE_PKEY
-						(REISERFS_SB(inode->i_sb)->
-						 priv_root->d_inode)->
-						k_objectid)) {
+				if (is_privroot_deh(dentry, deh))
 					continue;
-				}
 
 				d_off = deh_offset(deh);
 				*pos = d_off;
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index efd4d720718..27157912863 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -338,21 +338,8 @@ static struct dentry *reiserfs_lookup(struct inode *dir, struct dentry *dentry,
 				&path_to_entry, &de);
 	pathrelse(&path_to_entry);
 	if (retval == NAME_FOUND) {
-		/* Hide the .reiserfs_priv directory */
-		if (reiserfs_xattrs(dir->i_sb) &&
-		    !old_format_only(dir->i_sb) &&
-		    REISERFS_SB(dir->i_sb)->priv_root &&
-		    REISERFS_SB(dir->i_sb)->priv_root->d_inode &&
-		    de.de_objectid ==
-		    le32_to_cpu(INODE_PKEY
-				(REISERFS_SB(dir->i_sb)->priv_root->d_inode)->
-				k_objectid)) {
-			reiserfs_write_unlock(dir->i_sb);
-			return ERR_PTR(-EACCES);
-		}
-
-		inode =
-		    reiserfs_iget(dir->i_sb, (struct cpu_key *)&(de.de_dir_id));
+		inode = reiserfs_iget(dir->i_sb,
+				      (struct cpu_key *)&(de.de_dir_id));
 		if (!inode || IS_ERR(inode)) {
 			reiserfs_write_unlock(dir->i_sb);
 			return ERR_PTR(-EACCES);
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index c77984473db..2237e10c7c7 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -841,7 +841,7 @@ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
 	if (!dentry->d_inode)
 		return -EINVAL;
 
-	if (!reiserfs_xattrs(dentry->d_sb) ||
+	if (!dentry->d_sb->s_xattr ||
 	    get_inode_sd_version(dentry->d_inode) == STAT_DATA_V1)
 		return -EOPNOTSUPP;
 
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 8651640868a..6473650c28f 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -488,7 +488,6 @@ enum reiserfs_mount_options {
 #define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG))
 #define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED))
 #define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
-#define reiserfs_xattrs(s) ((s)->s_xattr != NULL)
 #define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
 #define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
 #define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
-- 
cgit v1.2.3


From 74dbbdd7fdc11763f4698d2f3e684cf4446951e6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:07:50 -0400
Subject: New helper: deactivate_locked_super()

Does equivalent of up_write(&s->s_umount); deactivate_super(s);
However, it does not does not unlock it until it's all over.
As the result, it's safe to use to dispose of new superblock on ->get_sb()
failure exits - nobody will see the sucker until it's all over.
Equivalent using up_write/deactivate_super is safe for that purpose
if superblock is either	safe to use or has NULL ->s_root when we unlock.
Normally filesystems take the required precautions, but
	a) we do have bugs in that area in some of them.
	b) up_write/deactivate_super sequence is extremely common,
so the helper makes sense anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/super.c         | 46 ++++++++++++++++++++++++++++++++++------------
 include/linux/fs.h |  1 +
 2 files changed, 35 insertions(+), 12 deletions(-)

diff --git a/fs/super.c b/fs/super.c
index 786fe7d7279..a9dc4c33ef4 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -207,6 +207,34 @@ void deactivate_super(struct super_block *s)
 
 EXPORT_SYMBOL(deactivate_super);
 
+/**
+ *	deactivate_locked_super	-	drop an active reference to superblock
+ *	@s: superblock to deactivate
+ *
+ *	Equivalent of up_write(&s->s_umount); deactivate_super(s);, except that
+ *	it does not unlock it until it's all over.  As the result, it's safe to
+ *	use to dispose of new superblock on ->get_sb() failure exits - nobody
+ *	will see the sucker until it's all over.  Equivalent using up_write +
+ *	deactivate_super is safe for that purpose only if superblock is either
+ *	safe to use or has NULL ->s_root when we unlock.
+ */
+void deactivate_locked_super(struct super_block *s)
+{
+	struct file_system_type *fs = s->s_type;
+	if (atomic_dec_and_lock(&s->s_active, &sb_lock)) {
+		s->s_count -= S_BIAS-1;
+		spin_unlock(&sb_lock);
+		vfs_dq_off(s, 0);
+		fs->kill_sb(s);
+		put_filesystem(fs);
+		put_super(s);
+	} else {
+		up_write(&s->s_umount);
+	}
+}
+
+EXPORT_SYMBOL(deactivate_locked_super);
+
 /**
  *	grab_super - acquire an active reference
  *	@s: reference we are trying to make active
@@ -797,8 +825,7 @@ int get_sb_ns(struct file_system_type *fs_type, int flags, void *data,
 		sb->s_flags = flags;
 		err = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
 		if (err) {
-			up_write(&sb->s_umount);
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			return err;
 		}
 
@@ -854,8 +881,7 @@ int get_sb_bdev(struct file_system_type *fs_type,
 
 	if (s->s_root) {
 		if ((flags ^ s->s_flags) & MS_RDONLY) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = -EBUSY;
 			goto error_bdev;
 		}
@@ -870,8 +896,7 @@ int get_sb_bdev(struct file_system_type *fs_type,
 		sb_set_blocksize(s, block_size(bdev));
 		error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
 		if (error) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			goto error;
 		}
 
@@ -921,8 +946,7 @@ int get_sb_nodev(struct file_system_type *fs_type,
 
 	error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
 	if (error) {
-		up_write(&s->s_umount);
-		deactivate_super(s);
+		deactivate_locked_super(s);
 		return error;
 	}
 	s->s_flags |= MS_ACTIVE;
@@ -952,8 +976,7 @@ int get_sb_single(struct file_system_type *fs_type,
 		s->s_flags = flags;
 		error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
 		if (error) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			return error;
 		}
 		s->s_flags |= MS_ACTIVE;
@@ -1006,8 +1029,7 @@ vfs_kern_mount(struct file_system_type *type, int flags, const char *name, void
 	return mnt;
 out_sb:
 	dput(mnt->mnt_root);
-	up_write(&mnt->mnt_sb->s_umount);
-	deactivate_super(mnt->mnt_sb);
+	deactivate_locked_super(mnt->mnt_sb);
 out_free_secdata:
 	free_secdata(secdata);
 out_mnt:
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5bed436f435..11484d08042 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1775,6 +1775,7 @@ void kill_block_super(struct super_block *sb);
 void kill_anon_super(struct super_block *sb);
 void kill_litter_super(struct super_block *sb);
 void deactivate_super(struct super_block *sb);
+void deactivate_locked_super(struct super_block *sb);
 int set_anon_super(struct super_block *s, void *data);
 struct super_block *sget(struct file_system_type *type,
 			int (*test)(struct super_block *,void *),
-- 
cgit v1.2.3


From 6f5bbff9a1b7d6864a495763448a363bbfa96324 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:34:22 -0400
Subject: Convert obvious places to deactivate_locked_super()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/mtd/mtdsuper.c |  3 +--
 fs/9p/vfs_super.c      |  5 +----
 fs/afs/super.c         |  3 +--
 fs/btrfs/super.c       | 12 ++++--------
 fs/cifs/cifsfs.c       |  3 +--
 fs/devpts/inode.c      |  5 ++---
 fs/ecryptfs/main.c     |  5 ++---
 fs/libfs.c             |  3 +--
 fs/nfs/super.c         | 15 +++++----------
 fs/proc/root.c         |  3 +--
 fs/ubifs/super.c       |  3 +--
 kernel/cgroup.c        |  3 +--
 12 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 92285d0089c..af8b42e0a55 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -74,8 +74,7 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags,
 
 	ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
 	if (ret < 0) {
-		up_write(&sb->s_umount);
-		deactivate_super(sb);
+		deactivate_locked_super(sb);
 		return ret;
 	}
 
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 7d23214e559..0d29a57c63e 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -174,10 +174,7 @@ P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
 	return 0;
 
 release_sb:
-	if (sb) {
-		up_write(&sb->s_umount);
-		deactivate_super(sb);
-	}
+	deactivate_locked_super(sb);
 
 free_stat:
 	kfree(st);
diff --git a/fs/afs/super.c b/fs/afs/super.c
index aee239a048c..2753f16dd31 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -405,8 +405,7 @@ static int afs_get_sb(struct file_system_type *fs_type,
 		sb->s_flags = flags;
 		ret = afs_fill_super(sb, &params);
 		if (ret < 0) {
-			up_write(&sb->s_umount);
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			goto error;
 		}
 		sb->s_options = new_opts;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 3536bdb2d7c..6dfae5b28f5 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -502,8 +502,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 
 	if (s->s_root) {
 		if ((flags ^ s->s_flags) & MS_RDONLY) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = -EBUSY;
 			goto error_close_devices;
 		}
@@ -517,8 +516,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 		error = btrfs_fill_super(s, fs_devices, data,
 					 flags & MS_SILENT ? 1 : 0);
 		if (error) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			goto error_free_subvol_name;
 		}
 
@@ -535,15 +533,13 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
 		mutex_unlock(&s->s_root->d_inode->i_mutex);
 
 		if (IS_ERR(root)) {
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = PTR_ERR(root);
 			goto error_free_subvol_name;
 		}
 		if (!root->d_inode) {
 			dput(root);
-			up_write(&s->s_umount);
-			deactivate_super(s);
+			deactivate_locked_super(s);
 			error = -ENXIO;
 			goto error_free_subvol_name;
 		}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 355e0efec0c..5e6d35804d7 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -602,8 +602,7 @@ cifs_get_sb(struct file_system_type *fs_type,
 
 	rc = cifs_read_super(sb, data, dev_name, flags & MS_SILENT ? 1 : 0);
 	if (rc) {
-		up_write(&sb->s_umount);
-		deactivate_super(sb);
+		deactivate_locked_super(sb);
 		return rc;
 	}
 	sb->s_flags |= MS_ACTIVE;
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 63a4a59e414..21165cf934f 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -389,11 +389,10 @@ static int devpts_get_sb(struct file_system_type *fs_type,
 	return 0;
 
 out_dput:
-	dput(s->s_root);
+	dput(s->s_root); /* undo dget() in simple_set_mnt() */
 
 out_undo_sget:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	return error;
 }
 
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index ccabd5faa04..9f0aa9883c2 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -614,9 +614,8 @@ static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags,
 	}
 	goto out;
 out_abort:
-	dput(sb->s_root);
-	up_write(&sb->s_umount);
-	deactivate_super(sb);
+	dput(sb->s_root); /* aka mnt->mnt_root, as set by get_sb_nodev() */
+	deactivate_locked_super(sb);
 out:
 	return rc;
 }
diff --git a/fs/libfs.c b/fs/libfs.c
index cd223190c4e..80046ddf506 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -246,8 +246,7 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
 	return 0;
 
 Enomem:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	return -ENOMEM;
 }
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 1679a164c8c..d2d67781c57 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2111,8 +2111,7 @@ out_err_nosb:
 error_splat_root:
 	dput(mntroot);
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	goto out;
 }
 
@@ -2208,8 +2207,7 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	dprintk("<-- nfs_xdev_get_sb() = %d [splat]\n", error);
 	return error;
 }
@@ -2469,8 +2467,7 @@ out_free:
 error_splat_root:
 	dput(mntroot);
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	goto out;
 }
 
@@ -2564,8 +2561,7 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	dprintk("<-- nfs4_xdev_get_sb() = %d [splat]\n", error);
 	return error;
 }
@@ -2649,8 +2645,7 @@ out_err_noserver:
 	return error;
 
 error_splat_super:
-	up_write(&s->s_umount);
-	deactivate_super(s);
+	deactivate_locked_super(s);
 	dprintk("<-- nfs4_referral_get_sb() = %d [splat]\n", error);
 	return error;
 }
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 1e15a2b176e..b080b791d9e 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -67,8 +67,7 @@ static int proc_get_sb(struct file_system_type *fs_type,
 		sb->s_flags = flags;
 		err = proc_fill_super(sb);
 		if (err) {
-			up_write(&sb->s_umount);
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			return err;
 		}
 
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index faa44f90608..e9f7a754c4f 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -2055,8 +2055,7 @@ static int ubifs_get_sb(struct file_system_type *fs_type, int flags,
 	return 0;
 
 out_deact:
-	up_write(&sb->s_umount);
-	deactivate_super(sb);
+	deactivate_locked_super(sb);
 out_close:
 	ubi_close_volume(ubi);
 	return err;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 382109b5bae..a7267bfd376 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1133,8 +1133,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
  free_cg_links:
 	free_cg_links(&tmp_cg_links);
  drop_new_super:
-	up_write(&sb->s_umount);
-	deactivate_super(sb);
+	deactivate_locked_super(sb);
 	return ret;
 }
 
-- 
cgit v1.2.3


From c96f58573778ddf96ff67108a635f3f642ea63d3 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:35:04 -0400
Subject: Fix a leak in failure exit in 9p ->get_sb()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/9p/vfs_super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 0d29a57c63e..ab5547ff29a 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -156,6 +156,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 
 	root = d_alloc_root(inode);
 	if (!root) {
+		iput(inode);
 		retval = -ENOMEM;
 		goto release_sb;
 	}
-- 
cgit v1.2.3


From 265e771e8197cdb22a1e2556663173fb62c9cd91 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 01:36:04 -0400
Subject: Fix deadlock in ipathfs ->get_sb()

forgot to unlock superblock before calling deactivate_super()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/infiniband/hw/ipath/ipath_fs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 8dc2bb78160..b3684060465 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -347,7 +347,7 @@ static int ipathfs_fill_super(struct super_block *sb, void *data,
 		spin_unlock_irqrestore(&ipath_devs_lock, flags);
 		ret = create_device_files(sb, dd);
 		if (ret) {
-			deactivate_super(sb);
+			deactivate_locked_super(sb);
 			goto bail;
 		}
 		spin_lock_irqsave(&ipath_devs_lock, flags);
-- 
cgit v1.2.3


From a731d12d6ddd1e703770cacb5dfecb155b03ee06 Mon Sep 17 00:00:00 2001
From: Joel Becker <Joel.Becker@oracle.com>
Date: Mon, 6 Apr 2009 16:43:42 -0700
Subject: ocfs2: Use nd_set_link().

ocfs2 was hand-calling vfs_follow_link(), but there's no point to that.
Let's use page_follow_link_light() and nd_set_link().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ocfs2/symlink.c | 77 ++++++++++++++++++++++++++----------------------------
 1 file changed, 37 insertions(+), 40 deletions(-)

diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index ed0a0cfd68d..579dd1b1110 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -39,6 +39,7 @@
 #include <linux/slab.h>
 #include <linux/pagemap.h>
 #include <linux/utsname.h>
+#include <linux/namei.h>
 
 #define MLOG_MASK_PREFIX ML_NAMEI
 #include <cluster/masklog.h>
@@ -54,26 +55,6 @@
 
 #include "buffer_head_io.h"
 
-static char *ocfs2_page_getlink(struct dentry * dentry,
-				struct page **ppage);
-static char *ocfs2_fast_symlink_getlink(struct inode *inode,
-					struct buffer_head **bh);
-
-/* get the link contents into pagecache */
-static char *ocfs2_page_getlink(struct dentry * dentry,
-				struct page **ppage)
-{
-	struct page * page;
-	struct address_space *mapping = dentry->d_inode->i_mapping;
-	page = read_mapping_page(mapping, 0, NULL);
-	if (IS_ERR(page))
-		goto sync_fail;
-	*ppage = page;
-	return kmap(page);
-
-sync_fail:
-	return (char*)page;
-}
 
 static char *ocfs2_fast_symlink_getlink(struct inode *inode,
 					struct buffer_head **bh)
@@ -128,40 +109,55 @@ out:
 	return ret;
 }
 
-static void *ocfs2_follow_link(struct dentry *dentry,
-			       struct nameidata *nd)
+static void *ocfs2_fast_follow_link(struct dentry *dentry,
+				    struct nameidata *nd)
 {
-	int status;
-	char *link;
+	int status = 0;
+	int len;
+	char *target, *link = ERR_PTR(-ENOMEM);
 	struct inode *inode = dentry->d_inode;
-	struct page *page = NULL;
 	struct buffer_head *bh = NULL;
-	
-	if (ocfs2_inode_is_fast_symlink(inode))
-		link = ocfs2_fast_symlink_getlink(inode, &bh);
-	else
-		link = ocfs2_page_getlink(dentry, &page);
-	if (IS_ERR(link)) {
-		status = PTR_ERR(link);
+
+	mlog_entry_void();
+
+	BUG_ON(!ocfs2_inode_is_fast_symlink(inode));
+	target = ocfs2_fast_symlink_getlink(inode, &bh);
+	if (IS_ERR(target)) {
+		status = PTR_ERR(target);
 		mlog_errno(status);
 		goto bail;
 	}
 
-	status = vfs_follow_link(nd, link);
+	/* Fast symlinks can't be large */
+	len = strlen(target);
+	link = kzalloc(len + 1, GFP_NOFS);
+	if (!link) {
+		status = -ENOMEM;
+		mlog_errno(status);
+		goto bail;
+	}
+
+	memcpy(link, target, len);
+	nd_set_link(nd, link);
 
 bail:
-	if (page) {
-		kunmap(page);
-		page_cache_release(page);
-	}
 	brelse(bh);
 
-	return ERR_PTR(status);
+	mlog_exit(status);
+	return status ? ERR_PTR(status) : link;
+}
+
+static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
+{
+	char *link = cookie;
+
+	kfree(link);
 }
 
 const struct inode_operations ocfs2_symlink_inode_operations = {
 	.readlink	= page_readlink,
-	.follow_link	= ocfs2_follow_link,
+	.follow_link	= page_follow_link_light,
+	.put_link	= page_put_link,
 	.getattr	= ocfs2_getattr,
 	.setattr	= ocfs2_setattr,
 	.setxattr	= generic_setxattr,
@@ -171,7 +167,8 @@ const struct inode_operations ocfs2_symlink_inode_operations = {
 };
 const struct inode_operations ocfs2_fast_symlink_inode_operations = {
 	.readlink	= ocfs2_readlink,
-	.follow_link	= ocfs2_follow_link,
+	.follow_link	= ocfs2_fast_follow_link,
+	.put_link	= ocfs2_fast_put_link,
 	.getattr	= ocfs2_getattr,
 	.setattr	= ocfs2_setattr,
 	.setxattr	= generic_setxattr,
-- 
cgit v1.2.3


From c490d79bb70c549e096099576b1df40a8810b0d8 Mon Sep 17 00:00:00 2001
From: "npiggin@suse.de" <npiggin@suse.de>
Date: Sun, 26 Apr 2009 20:25:53 +1000
Subject: fs: dcache fix LRU ordering

Fix ordering of LRU when moving referenced dentries to the head of the list
(they should go to the head of the list in the same order as they were found
from the tail, rather than reverse order).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/dcache.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 1fcffebfb44..75659a6fd1f 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -481,7 +481,7 @@ restart:
 			if ((flags & DCACHE_REFERENCED)
 				&& (dentry->d_flags & DCACHE_REFERENCED)) {
 				dentry->d_flags &= ~DCACHE_REFERENCED;
-				list_move_tail(&dentry->d_lru, &referenced);
+				list_move(&dentry->d_lru, &referenced);
 				spin_unlock(&dentry->d_lock);
 			} else {
 				list_move_tail(&dentry->d_lru, &tmp);
-- 
cgit v1.2.3


From 774e33e70b2bffa8c602d22a5d27c0061a0039cc Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sun, 26 Apr 2009 14:51:17 +0200
Subject: ROMFS: romfs_dev_read() error ignored

romfs_dev_read() may return -EIO, but ret is unsigned, so the errorpath
isn't taken.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/romfs/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index c53b5ef8a02..4ab3c03d8f9 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -298,7 +298,8 @@ static struct inode *romfs_iget(struct super_block *sb, unsigned long pos)
 	struct romfs_inode ri;
 	struct inode *i;
 	unsigned long nlen;
-	unsigned nextfh, ret;
+	unsigned nextfh;
+	int ret;
 	umode_t mode;
 
 	/* we might have to traverse a chain of "hard link" file entries to get
-- 
cgit v1.2.3


From db6c1fbb92eeb4cb52c6133e0c533602f49fc4bd Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 7 Apr 2009 18:07:08 +0200
Subject: romfs: cleanup romfs_fs.h

There's no kernel-only content in it anymore, so move it to header-y
and remove the superflous #ifdef __KERNEL__.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 include/linux/Kbuild     | 2 +-
 include/linux/romfs_fs.h | 5 -----
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index ca9b9b9bd33..3f0eaa397ef 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -138,6 +138,7 @@ header-y += qnxtypes.h
 header-y += radeonfb.h
 header-y += raw.h
 header-y += resource.h
+header-y += romfs_fs.h
 header-y += rose.h
 header-y += serial_reg.h
 header-y += smbno.h
@@ -314,7 +315,6 @@ unifdef-y += irqnr.h
 unifdef-y += reboot.h
 unifdef-y += reiserfs_fs.h
 unifdef-y += reiserfs_xattr.h
-unifdef-y += romfs_fs.h
 unifdef-y += route.h
 unifdef-y += rtc.h
 unifdef-y += rtnetlink.h
diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h
index e20bbf9eb36..c490fbc43fe 100644
--- a/include/linux/romfs_fs.h
+++ b/include/linux/romfs_fs.h
@@ -53,9 +53,4 @@ struct romfs_inode {
 #define ROMFH_PAD (ROMFH_SIZE-1)
 #define ROMFH_MASK (~ROMFH_PAD)
 
-#ifdef __KERNEL__
-
-/* Not much now */
-
-#endif /* __KERNEL__ */
 #endif
-- 
cgit v1.2.3


From ddbaaf3024d764ced700efb2d818709b90ea6fdd Mon Sep 17 00:00:00 2001
From: H Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 29 Apr 2009 20:14:57 -0400
Subject: NULL noise in fs/super.c:kill_bdev_super()

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/super.c b/fs/super.c
index a9dc4c33ef4..1943fdf655f 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -922,7 +922,7 @@ void kill_block_super(struct super_block *sb)
 	struct block_device *bdev = sb->s_bdev;
 	fmode_t mode = sb->s_mode;
 
-	bdev->bd_super = 0;
+	bdev->bd_super = NULL;
 	generic_shutdown_super(sb);
 	sync_blockdev(bdev);
 	close_bdev_exclusive(bdev, mode);
-- 
cgit v1.2.3


From 6b3304b531704711286c3359b06922b83fdba015 Mon Sep 17 00:00:00 2001
From: Manish Katiyar <mkatiyar@gmail.com>
Date: Tue, 31 Mar 2009 19:35:54 +0530
Subject: Make checkpatch.pl shut up on fs/inode.c

Code Quality According To Mingo(tm) has been vastly improved,
no code has been damaged^Wchanged^Wdamaged.

[commit message rewritten -- AV]

Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/inode.c | 81 +++++++++++++++++++++++++++-----------------------------------
 1 file changed, 35 insertions(+), 46 deletions(-)

diff --git a/fs/inode.c b/fs/inode.c
index 6ad14a1cd8c..0571983755d 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -99,7 +99,7 @@ static DEFINE_MUTEX(iprune_mutex);
  */
 struct inodes_stat_t inodes_stat;
 
-static struct kmem_cache * inode_cachep __read_mostly;
+static struct kmem_cache *inode_cachep __read_mostly;
 
 static void wake_up_inode(struct inode *inode)
 {
@@ -124,7 +124,7 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
 	static struct inode_operations empty_iops;
 	static const struct file_operations empty_fops;
 
-	struct address_space * const mapping = &inode->i_data;
+	struct address_space *const mapping = &inode->i_data;
 
 	inode->i_sb = sb;
 	inode->i_blkbits = sb->s_blocksize_bits;
@@ -216,7 +216,7 @@ static struct inode *alloc_inode(struct super_block *sb)
 	return NULL;
 }
 
-void destroy_inode(struct inode *inode) 
+void destroy_inode(struct inode *inode)
 {
 	BUG_ON(inode_has_buffers(inode));
 	security_inode_free(inode);
@@ -252,12 +252,11 @@ void inode_init_once(struct inode *inode)
 	mutex_init(&inode->inotify_mutex);
 #endif
 }
-
 EXPORT_SYMBOL(inode_init_once);
 
 static void init_once(void *foo)
 {
-	struct inode * inode = (struct inode *) foo;
+	struct inode *inode = (struct inode *) foo;
 
 	inode_init_once(inode);
 }
@@ -265,7 +264,7 @@ static void init_once(void *foo)
 /*
  * inode_lock must be held
  */
-void __iget(struct inode * inode)
+void __iget(struct inode *inode)
 {
 	if (atomic_read(&inode->i_count)) {
 		atomic_inc(&inode->i_count);
@@ -289,7 +288,7 @@ void clear_inode(struct inode *inode)
 {
 	might_sleep();
 	invalidate_inode_buffers(inode);
-       
+
 	BUG_ON(inode->i_data.nrpages);
 	BUG_ON(!(inode->i_state & I_FREEING));
 	BUG_ON(inode->i_state & I_CLEAR);
@@ -303,7 +302,6 @@ void clear_inode(struct inode *inode)
 		cd_forget(inode);
 	inode->i_state = I_CLEAR;
 }
-
 EXPORT_SYMBOL(clear_inode);
 
 /*
@@ -351,8 +349,8 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
 
 	next = head->next;
 	for (;;) {
-		struct list_head * tmp = next;
-		struct inode * inode;
+		struct list_head *tmp = next;
+		struct inode *inode;
 
 		/*
 		 * We can reschedule here without worrying about the list's
@@ -391,7 +389,7 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
  *	fails because there are busy inodes then a non zero value is returned.
  *	If the discard is successful all the inodes have been discarded.
  */
-int invalidate_inodes(struct super_block * sb)
+int invalidate_inodes(struct super_block *sb)
 {
 	int busy;
 	LIST_HEAD(throw_away);
@@ -407,7 +405,6 @@ int invalidate_inodes(struct super_block * sb)
 
 	return busy;
 }
-
 EXPORT_SYMBOL(invalidate_inodes);
 
 static int can_unuse(struct inode *inode)
@@ -504,7 +501,7 @@ static int shrink_icache_memory(int nr, gfp_t gfp_mask)
 		 * Nasty deadlock avoidance.  We may hold various FS locks,
 		 * and we don't want to recurse into the FS that called us
 		 * in clear_inode() and friends..
-	 	 */
+		 */
 		if (!(gfp_mask & __GFP_FS))
 			return -1;
 		prune_icache(nr);
@@ -524,10 +521,13 @@ static void __wait_on_freeing_inode(struct inode *inode);
  * by hand after calling find_inode now! This simplifies iunique and won't
  * add any additional branch in the common code.
  */
-static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data)
+static struct inode *find_inode(struct super_block *sb,
+				struct hlist_head *head,
+				int (*test)(struct inode *, void *),
+				void *data)
 {
 	struct hlist_node *node;
-	struct inode * inode = NULL;
+	struct inode *inode = NULL;
 
 repeat:
 	hlist_for_each_entry(inode, node, head, i_hash) {
@@ -548,10 +548,11 @@ repeat:
  * find_inode_fast is the fast path version of find_inode, see the comment at
  * iget_locked for details.
  */
-static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino)
+static struct inode *find_inode_fast(struct super_block *sb,
+				struct hlist_head *head, unsigned long ino)
 {
 	struct hlist_node *node;
-	struct inode * inode = NULL;
+	struct inode *inode = NULL;
 
 repeat:
 	hlist_for_each_entry(inode, node, head, i_hash) {
@@ -631,10 +632,10 @@ struct inode *new_inode(struct super_block *sb)
 	 * here to attempt to avoid that.
 	 */
 	static unsigned int last_ino;
-	struct inode * inode;
+	struct inode *inode;
 
 	spin_lock_prefetch(&inode_lock);
-	
+
 	inode = alloc_inode(sb);
 	if (inode) {
 		spin_lock(&inode_lock);
@@ -645,7 +646,6 @@ struct inode *new_inode(struct super_block *sb)
 	}
 	return inode;
 }
-
 EXPORT_SYMBOL(new_inode);
 
 void unlock_new_inode(struct inode *inode)
@@ -674,7 +674,6 @@ void unlock_new_inode(struct inode *inode)
 	inode->i_state &= ~(I_LOCK|I_NEW);
 	wake_up_inode(inode);
 }
-
 EXPORT_SYMBOL(unlock_new_inode);
 
 /*
@@ -683,13 +682,17 @@ EXPORT_SYMBOL(unlock_new_inode);
  * We no longer cache the sb_flags in i_flags - see fs.h
  *	-- rmk@arm.uk.linux.org
  */
-static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data)
+static struct inode *get_new_inode(struct super_block *sb,
+				struct hlist_head *head,
+				int (*test)(struct inode *, void *),
+				int (*set)(struct inode *, void *),
+				void *data)
 {
-	struct inode * inode;
+	struct inode *inode;
 
 	inode = alloc_inode(sb);
 	if (inode) {
-		struct inode * old;
+		struct inode *old;
 
 		spin_lock(&inode_lock);
 		/* We released the lock, so.. */
@@ -731,13 +734,14 @@ set_failed:
  * get_new_inode_fast is the fast path version of get_new_inode, see the
  * comment at iget_locked for details.
  */
-static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino)
+static struct inode *get_new_inode_fast(struct super_block *sb,
+				struct hlist_head *head, unsigned long ino)
 {
-	struct inode * inode;
+	struct inode *inode;
 
 	inode = alloc_inode(sb);
 	if (inode) {
-		struct inode * old;
+		struct inode *old;
 
 		spin_lock(&inode_lock);
 		/* We released the lock, so.. */
@@ -823,7 +827,6 @@ struct inode *igrab(struct inode *inode)
 	spin_unlock(&inode_lock);
 	return inode;
 }
-
 EXPORT_SYMBOL(igrab);
 
 /**
@@ -924,7 +927,6 @@ struct inode *ilookup5_nowait(struct super_block *sb, unsigned long hashval,
 
 	return ifind(sb, head, test, data, 0);
 }
-
 EXPORT_SYMBOL(ilookup5_nowait);
 
 /**
@@ -953,7 +955,6 @@ struct inode *ilookup5(struct super_block *sb, unsigned long hashval,
 
 	return ifind(sb, head, test, data, 1);
 }
-
 EXPORT_SYMBOL(ilookup5);
 
 /**
@@ -976,7 +977,6 @@ struct inode *ilookup(struct super_block *sb, unsigned long ino)
 
 	return ifind_fast(sb, head, ino);
 }
-
 EXPORT_SYMBOL(ilookup);
 
 /**
@@ -1015,7 +1015,6 @@ struct inode *iget5_locked(struct super_block *sb, unsigned long hashval,
 	 */
 	return get_new_inode(sb, head, test, set, data);
 }
-
 EXPORT_SYMBOL(iget5_locked);
 
 /**
@@ -1047,7 +1046,6 @@ struct inode *iget_locked(struct super_block *sb, unsigned long ino)
 	 */
 	return get_new_inode_fast(sb, head, ino);
 }
-
 EXPORT_SYMBOL(iget_locked);
 
 int insert_inode_locked(struct inode *inode)
@@ -1076,7 +1074,6 @@ int insert_inode_locked(struct inode *inode)
 		iput(old);
 	}
 }
-
 EXPORT_SYMBOL(insert_inode_locked);
 
 int insert_inode_locked4(struct inode *inode, unsigned long hashval,
@@ -1106,7 +1103,6 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval,
 		iput(old);
 	}
 }
-
 EXPORT_SYMBOL(insert_inode_locked4);
 
 /**
@@ -1124,7 +1120,6 @@ void __insert_inode_hash(struct inode *inode, unsigned long hashval)
 	hlist_add_head(&inode->i_hash, head);
 	spin_unlock(&inode_lock);
 }
-
 EXPORT_SYMBOL(__insert_inode_hash);
 
 /**
@@ -1139,7 +1134,6 @@ void remove_inode_hash(struct inode *inode)
 	hlist_del_init(&inode->i_hash);
 	spin_unlock(&inode_lock);
 }
-
 EXPORT_SYMBOL(remove_inode_hash);
 
 /*
@@ -1187,7 +1181,6 @@ void generic_delete_inode(struct inode *inode)
 	BUG_ON(inode->i_state != I_CLEAR);
 	destroy_inode(inode);
 }
-
 EXPORT_SYMBOL(generic_delete_inode);
 
 static void generic_forget_inode(struct inode *inode)
@@ -1237,12 +1230,11 @@ void generic_drop_inode(struct inode *inode)
 	else
 		generic_forget_inode(inode);
 }
-
 EXPORT_SYMBOL_GPL(generic_drop_inode);
 
 /*
  * Called when we're dropping the last reference
- * to an inode. 
+ * to an inode.
  *
  * Call the FS "drop()" function, defaulting to
  * the legacy UNIX filesystem behaviour..
@@ -1262,7 +1254,7 @@ static inline void iput_final(struct inode *inode)
 }
 
 /**
- *	iput	- put an inode 
+ *	iput	- put an inode
  *	@inode: inode to put
  *
  *	Puts an inode, dropping its usage count. If the inode use count hits
@@ -1279,7 +1271,6 @@ void iput(struct inode *inode)
 			iput_final(inode);
 	}
 }
-
 EXPORT_SYMBOL(iput);
 
 /**
@@ -1290,10 +1281,10 @@ EXPORT_SYMBOL(iput);
  *	Returns the block number on the device holding the inode that
  *	is the disk block number for the block of the file requested.
  *	That is, asked for block 4 of inode 1 the function will return the
- *	disk block relative to the disk start that holds that block of the 
+ *	disk block relative to the disk start that holds that block of the
  *	file.
  */
-sector_t bmap(struct inode * inode, sector_t block)
+sector_t bmap(struct inode *inode, sector_t block)
 {
 	sector_t res = 0;
 	if (inode->i_mapping->a_ops->bmap)
@@ -1425,7 +1416,6 @@ void file_update_time(struct file *file)
 		mark_inode_dirty_sync(inode);
 	mnt_drop_write(file->f_path.mnt);
 }
-
 EXPORT_SYMBOL(file_update_time);
 
 int inode_needs_sync(struct inode *inode)
@@ -1436,7 +1426,6 @@ int inode_needs_sync(struct inode *inode)
 		return 1;
 	return 0;
 }
-
 EXPORT_SYMBOL(inode_needs_sync);
 
 int inode_wait(void *word)
-- 
cgit v1.2.3


From e24977d45f45d1675e050dc1a0aaf4bfc4ca9866 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu, 2 Apr 2009 21:17:03 -0400
Subject: Reduce path_lookup() abuses

... use kern_path() where possible

[folded a fix from rdd]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/scsi/osd/osd_uld.c | 20 ++++++++++----------
 fs/gfs2/ops_fstype.c       |  8 ++++----
 security/tomoyo/common.c   |  6 +++---
 security/tomoyo/realpath.c | 16 ++++++++--------
 4 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index f644c9571ea..22b59e13ba8 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -173,26 +173,26 @@ static const struct file_operations osd_fops = {
 	.unlocked_ioctl = osd_uld_ioctl,
 };
 
-struct osd_dev *osduld_path_lookup(const char *path)
+struct osd_dev *osduld_path_lookup(const char *name)
 {
-	struct nameidata nd;
+	struct path path;
 	struct inode *inode;
 	struct cdev *cdev;
 	struct osd_uld_device *uninitialized_var(oud);
 	int error;
 
-	if (!path || !*path) {
+	if (!name || !*name) {
 		OSD_ERR("Mount with !path || !*path\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	error = path_lookup(path, LOOKUP_FOLLOW, &nd);
+	error = kern_path(name, LOOKUP_FOLLOW, &path);
 	if (error) {
-		OSD_ERR("path_lookup of %s faild=>%d\n", path, error);
+		OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
 		return ERR_PTR(error);
 	}
 
-	inode = nd.path.dentry->d_inode;
+	inode = path.dentry->d_inode;
 	error = -EINVAL; /* Not the right device e.g osd_uld_device */
 	if (!S_ISCHR(inode->i_mode)) {
 		OSD_DEBUG("!S_ISCHR()\n");
@@ -202,15 +202,15 @@ struct osd_dev *osduld_path_lookup(const char *path)
 	cdev = inode->i_cdev;
 	if (!cdev) {
 		OSD_ERR("Before mounting an OSD Based filesystem\n");
-		OSD_ERR("  user-mode must open+close the %s device\n", path);
-		OSD_ERR("  Example: bash: echo < %s\n", path);
+		OSD_ERR("  user-mode must open+close the %s device\n", name);
+		OSD_ERR("  Example: bash: echo < %s\n", name);
 		goto out;
 	}
 
 	/* The Magic wand. Is it our char-dev */
 	/* TODO: Support sg devices */
 	if (cdev->owner != THIS_MODULE) {
-		OSD_ERR("Error mounting %s - is not an OSD device\n", path);
+		OSD_ERR("Error mounting %s - is not an OSD device\n", name);
 		goto out;
 	}
 
@@ -220,7 +220,7 @@ struct osd_dev *osduld_path_lookup(const char *path)
 	error = 0;
 
 out:
-	path_put(&nd.path);
+	path_put(&path);
 	return error ? ERR_PTR(error) : &oud->od;
 }
 EXPORT_SYMBOL(osduld_path_lookup);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 650a730707b..1ff9473ea75 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1282,21 +1282,21 @@ static int gfs2_get_sb(struct file_system_type *fs_type, int flags,
 static struct super_block *get_gfs2_sb(const char *dev_name)
 {
 	struct super_block *sb;
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
+	error = kern_path(dev_name, LOOKUP_FOLLOW, &path);
 	if (error) {
 		printk(KERN_WARNING "GFS2: path_lookup on %s returned error %d\n",
 		       dev_name, error);
 		return NULL;
 	}
-	sb = nd.path.dentry->d_inode->i_sb;
+	sb = path.dentry->d_inode->i_sb;
 	if (sb && (sb->s_type == &gfs2_fs_type))
 		atomic_inc(&sb->s_active);
 	else
 		sb = NULL;
-	path_put(&nd.path);
+	path_put(&path);
 	return sb;
 }
 
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index d4d41b3efc7..ddfb9cccf46 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -1720,14 +1720,14 @@ static bool tomoyo_policy_loader_exists(void)
 	 * policies are not loaded yet.
 	 * Thus, let do_execve() call this function everytime.
 	 */
-	struct nameidata nd;
+	struct path path;
 
-	if (path_lookup(tomoyo_loader, LOOKUP_FOLLOW, &nd)) {
+	if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
 		printk(KERN_INFO "Not activating Mandatory Access Control now "
 		       "since %s doesn't exist.\n", tomoyo_loader);
 		return false;
 	}
-	path_put(&nd.path);
+	path_put(&path);
 	return true;
 }
 
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index bf8e2b45168..40927a84cb6 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -165,11 +165,11 @@ char *tomoyo_realpath_from_path(struct path *path)
  */
 char *tomoyo_realpath(const char *pathname)
 {
-	struct nameidata nd;
+	struct path path;
 
-	if (pathname && path_lookup(pathname, LOOKUP_FOLLOW, &nd) == 0) {
-		char *buf = tomoyo_realpath_from_path(&nd.path);
-		path_put(&nd.path);
+	if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) {
+		char *buf = tomoyo_realpath_from_path(&path);
+		path_put(&path);
 		return buf;
 	}
 	return NULL;
@@ -184,11 +184,11 @@ char *tomoyo_realpath(const char *pathname)
  */
 char *tomoyo_realpath_nofollow(const char *pathname)
 {
-	struct nameidata nd;
+	struct path path;
 
-	if (pathname && path_lookup(pathname, 0, &nd) == 0) {
-		char *buf = tomoyo_realpath_from_path(&nd.path);
-		path_put(&nd.path);
+	if (pathname && kern_path(pathname, 0, &path) == 0) {
+		char *buf = tomoyo_realpath_from_path(&path);
+		path_put(&path);
 		return buf;
 	}
 	return NULL;
-- 
cgit v1.2.3


From a44ddbb6d8a8ffe4e34e417048dfdd8f3dd1de4f Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 6 Apr 2009 09:38:49 -0400
Subject: Make open_exec() and sys_uselib() use may_open(), instead of
 duplicating its parts

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 639177b0eea..41ae8e0de72 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -126,11 +126,7 @@ SYSCALL_DEFINE1(uselib, const char __user *, library)
 	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
 		goto exit;
 
-	error = inode_permission(nd.path.dentry->d_inode,
-				 MAY_READ | MAY_EXEC | MAY_OPEN);
-	if (error)
-		goto exit;
-	error = ima_path_check(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN);
+	error = may_open(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN, 0);
 	if (error)
 		goto exit;
 
@@ -677,10 +673,7 @@ struct file *open_exec(const char *name)
 	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
 		goto out_path_put;
 
-	err = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_OPEN);
-	if (err)
-		goto out_path_put;
-	err = ima_path_check(&nd.path, MAY_EXEC | MAY_OPEN);
+	err = may_open(&nd.path, MAY_EXEC | MAY_OPEN, 0);
 	if (err)
 		goto out_path_put;
 
-- 
cgit v1.2.3


From 6e8341a11eb21826b7192d0bb88cb5b44900a9af Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 6 Apr 2009 11:16:22 -0400
Subject: Switch open_exec() and sys_uselib() to do_open_filp()

... and make path_lookup_open() static

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/exec.c             | 72 ++++++++++++++++++---------------------------------
 fs/namei.c            | 13 +++++-----
 fs/open.c             |  2 +-
 include/linux/fs.h    |  2 +-
 include/linux/namei.h |  1 -
 5 files changed, 34 insertions(+), 56 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 41ae8e0de72..895823d0149 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -105,36 +105,28 @@ static inline void put_binfmt(struct linux_binfmt * fmt)
 SYSCALL_DEFINE1(uselib, const char __user *, library)
 {
 	struct file *file;
-	struct nameidata nd;
 	char *tmp = getname(library);
 	int error = PTR_ERR(tmp);
 
-	if (!IS_ERR(tmp)) {
-		error = path_lookup_open(AT_FDCWD, tmp,
-					 LOOKUP_FOLLOW, &nd,
-					 FMODE_READ|FMODE_EXEC);
-		putname(tmp);
-	}
-	if (error)
+	if (IS_ERR(tmp))
+		goto out;
+
+	file = do_filp_open(AT_FDCWD, tmp,
+				O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+				MAY_READ | MAY_EXEC | MAY_OPEN);
+	putname(tmp);
+	error = PTR_ERR(file);
+	if (IS_ERR(file))
 		goto out;
 
 	error = -EINVAL;
-	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
+	if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
 		goto exit;
 
 	error = -EACCES;
-	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
-		goto exit;
-
-	error = may_open(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN, 0);
-	if (error)
+	if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
 		goto exit;
 
-	file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
-	error = PTR_ERR(file);
-	if (IS_ERR(file))
-		goto out;
-
 	fsnotify_open(file->f_path.dentry);
 
 	error = -ENOEXEC;
@@ -156,13 +148,10 @@ SYSCALL_DEFINE1(uselib, const char __user *, library)
 		}
 		read_unlock(&binfmt_lock);
 	}
+exit:
 	fput(file);
 out:
   	return error;
-exit:
-	release_open_intent(&nd);
-	path_put(&nd.path);
-	goto out;
 }
 
 #ifdef CONFIG_MMU
@@ -657,44 +646,33 @@ EXPORT_SYMBOL(setup_arg_pages);
 
 struct file *open_exec(const char *name)
 {
-	struct nameidata nd;
 	struct file *file;
 	int err;
 
-	err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd,
-				FMODE_READ|FMODE_EXEC);
-	if (err)
+	file = do_filp_open(AT_FDCWD, name,
+				O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+				MAY_EXEC | MAY_OPEN);
+	if (IS_ERR(file))
 		goto out;
 
 	err = -EACCES;
-	if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
-		goto out_path_put;
-
-	if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
-		goto out_path_put;
-
-	err = may_open(&nd.path, MAY_EXEC | MAY_OPEN, 0);
-	if (err)
-		goto out_path_put;
+	if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
+		goto exit;
 
-	file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
-	if (IS_ERR(file))
-		return file;
+	if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
+		goto exit;
 
 	fsnotify_open(file->f_path.dentry);
 
 	err = deny_write_access(file);
-	if (err) {
-		fput(file);
-		goto out;
-	}
+	if (err)
+		goto exit;
 
+out:
 	return file;
 
- out_path_put:
-	release_open_intent(&nd);
-	path_put(&nd.path);
- out:
+exit:
+	fput(file);
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL(open_exec);
diff --git a/fs/namei.c b/fs/namei.c
index 78f253cd2d4..967c3db9272 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1130,8 +1130,8 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt,
  * @nd: pointer to nameidata
  * @open_flags: open intent flags
  */
-int path_lookup_open(int dfd, const char *name, unsigned int lookup_flags,
-		struct nameidata *nd, int open_flags)
+static int path_lookup_open(int dfd, const char *name,
+		unsigned int lookup_flags, struct nameidata *nd, int open_flags)
 {
 	struct file *filp = get_empty_filp();
 	int err;
@@ -1637,18 +1637,19 @@ static int open_will_write_to_fs(int flag, struct inode *inode)
  * open_to_namei_flags() for more details.
  */
 struct file *do_filp_open(int dfd, const char *pathname,
-		int open_flag, int mode)
+		int open_flag, int mode, int acc_mode)
 {
 	struct file *filp;
 	struct nameidata nd;
-	int acc_mode, error;
+	int error;
 	struct path path;
 	struct dentry *dir;
 	int count = 0;
 	int will_write;
 	int flag = open_to_namei_flags(open_flag);
 
-	acc_mode = MAY_OPEN | ACC_MODE(flag);
+	if (!acc_mode)
+		acc_mode = MAY_OPEN | ACC_MODE(flag);
 
 	/* O_TRUNC implies we need access checks for write permissions */
 	if (flag & O_TRUNC)
@@ -1869,7 +1870,7 @@ do_link:
  */
 struct file *filp_open(const char *filename, int flags, int mode)
 {
-	return do_filp_open(AT_FDCWD, filename, flags, mode);
+	return do_filp_open(AT_FDCWD, filename, flags, mode, 0);
 }
 EXPORT_SYMBOL(filp_open);
 
diff --git a/fs/open.c b/fs/open.c
index 377eb25b6ab..bdfbf03615a 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1033,7 +1033,7 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode)
 	if (!IS_ERR(tmp)) {
 		fd = get_unused_fd_flags(flags);
 		if (fd >= 0) {
-			struct file *f = do_filp_open(dfd, tmp, flags, mode);
+			struct file *f = do_filp_open(dfd, tmp, flags, mode, 0);
 			if (IS_ERR(f)) {
 				put_unused_fd(fd);
 				fd = PTR_ERR(f);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 11484d08042..ed788426f46 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2118,7 +2118,7 @@ extern struct file *create_write_pipe(int flags);
 extern void free_write_pipe(struct file *);
 
 extern struct file *do_filp_open(int dfd, const char *pathname,
-		int open_flag, int mode);
+		int open_flag, int mode, int acc_mode);
 extern int may_open(struct path *, int, int);
 
 extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
diff --git a/include/linux/namei.h b/include/linux/namei.h
index fc2e0357987..518098fe63a 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -69,7 +69,6 @@ extern int path_lookup(const char *, unsigned, struct nameidata *);
 extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
 			   const char *, unsigned int, struct nameidata *);
 
-extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
 extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
 		int (*open)(struct inode *, struct file *));
 extern struct file *nameidata_to_filp(struct nameidata *nd, int flags);
-- 
cgit v1.2.3


From f9dbd05bc97d1d4f17c2057612f6a8e4dbd039e0 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed, 6 May 2009 19:56:21 -0400
Subject: switch ufs directories to ufs_sync_file()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ufs/dir.c  | 2 +-
 fs/ufs/file.c | 2 +-
 fs/ufs/ufs.h  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index dbbbc466876..6321b797061 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -666,6 +666,6 @@ not_empty:
 const struct file_operations ufs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= ufs_readdir,
-	.fsync		= file_fsync,
+	.fsync		= ufs_sync_file,
 	.llseek		= generic_file_llseek,
 };
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index 625ef17c6f8..2bd3a161571 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -30,7 +30,7 @@
 #include "ufs.h"
 
 
-static int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
 {
 	struct inode *inode = dentry->d_inode;
 	int err;
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 69b3427d788..d0c4acd4f1f 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -98,8 +98,8 @@ extern void ufs_set_link(struct inode *dir, struct ufs_dir_entry *de,
 /* file.c */
 extern const struct inode_operations ufs_file_inode_operations;
 extern const struct file_operations ufs_file_operations;
-
 extern const struct address_space_operations ufs_aops;
+extern int ufs_sync_file(struct file *, struct dentry *, int);
 
 /* ialloc.c */
 extern void ufs_free_inode (struct inode *inode);
-- 
cgit v1.2.3


From 2a32cebd6cbcc43996c3e2d114fa32ba1e71192a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 8 May 2009 16:05:57 -0400
Subject: Fix races around the access to ->s_options

Put generic_show_options read access to s_options under rcu_read_lock,
split save_mount_options() into "we are setting it the first time"
(uses in foo_fill_super()) and "we are relacing and freeing the old one",
synchronize_rcu() before kfree() in the latter.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/isdn/capi/capifs.c |  3 +--
 fs/affs/super.c            |  3 +--
 fs/afs/super.c             |  4 ++--
 fs/hpfs/super.c            |  3 +--
 fs/namespace.c             | 21 ++++++++++++++++++---
 fs/reiserfs/super.c        |  3 +--
 include/linux/fs.h         |  1 +
 7 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index b129409925a..8f9f3b5a3e8 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -75,8 +75,7 @@ static int capifs_remount(struct super_block *s, int *flags, char *data)
 		}
 	}
 
-	kfree(s->s_options);
-	s->s_options = new_opt;
+	replace_mount_options(s, new_opt);
 
 	config.setuid  = setuid;
 	config.setgid  = setgid;
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 5ce695e707f..63f5183f263 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -507,8 +507,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
 		kfree(new_opts);
 		return -EINVAL;
 	}
-	kfree(sb->s_options);
-	sb->s_options = new_opts;
+	replace_mount_options(sb, new_opts);
 
 	sbi->s_flags = mount_flags;
 	sbi->s_mode  = mode;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 2753f16dd31..76828e5f8a3 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -408,17 +408,17 @@ static int afs_get_sb(struct file_system_type *fs_type,
 			deactivate_locked_super(sb);
 			goto error;
 		}
-		sb->s_options = new_opts;
+		save_mount_options(sb, new_opts);
 		sb->s_flags |= MS_ACTIVE;
 	} else {
 		_debug("reuse");
-		kfree(new_opts);
 		ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
 	}
 
 	simple_set_mnt(mnt, sb);
 	afs_put_volume(params.volume);
 	afs_put_cell(params.cell);
+	kfree(new_opts);
 	_leave(" = 0 [%p]", sb);
 	return 0;
 
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index fecf402d7b8..fc77965be84 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -423,8 +423,7 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
 
 	if (!(*flags & MS_RDONLY)) mark_dirty(s);
 
-	kfree(s->s_options);
-	s->s_options = new_opts;
+	replace_mount_options(s, new_opts);
 
 	return 0;
 
diff --git a/fs/namespace.c b/fs/namespace.c
index 0d2003fb437..134d494158d 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -695,12 +695,16 @@ static inline void mangle(struct seq_file *m, const char *s)
  */
 int generic_show_options(struct seq_file *m, struct vfsmount *mnt)
 {
-	const char *options = mnt->mnt_sb->s_options;
+	const char *options;
+
+	rcu_read_lock();
+	options = rcu_dereference(mnt->mnt_sb->s_options);
 
 	if (options != NULL && options[0]) {
 		seq_putc(m, ',');
 		mangle(m, options);
 	}
+	rcu_read_unlock();
 
 	return 0;
 }
@@ -721,11 +725,22 @@ EXPORT_SYMBOL(generic_show_options);
  */
 void save_mount_options(struct super_block *sb, char *options)
 {
-	kfree(sb->s_options);
-	sb->s_options = kstrdup(options, GFP_KERNEL);
+	BUG_ON(sb->s_options);
+	rcu_assign_pointer(sb->s_options, kstrdup(options, GFP_KERNEL));
 }
 EXPORT_SYMBOL(save_mount_options);
 
+void replace_mount_options(struct super_block *sb, char *options)
+{
+	char *old = sb->s_options;
+	rcu_assign_pointer(sb->s_options, options);
+	if (old) {
+		synchronize_rcu();
+		kfree(old);
+	}
+}
+EXPORT_SYMBOL(replace_mount_options);
+
 #ifdef CONFIG_PROC_FS
 /* iterator */
 static void *m_start(struct seq_file *m, loff_t *pos)
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index d444fe0013a..1215a4f50cd 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1316,8 +1316,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
 	}
 
 out_ok:
-	kfree(s->s_options);
-	s->s_options = new_opts;
+	replace_mount_options(s, new_opts);
 	return 0;
 
 out_err:
diff --git a/include/linux/fs.h b/include/linux/fs.h
index ed788426f46..3b534e527e0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2368,6 +2368,7 @@ extern void file_update_time(struct file *file);
 
 extern int generic_show_options(struct seq_file *m, struct vfsmount *mnt);
 extern void save_mount_options(struct super_block *sb, char *options);
+extern void replace_mount_options(struct super_block *sb, char *options);
 
 static inline ino_t parent_ino(struct dentry *dentry)
 {
-- 
cgit v1.2.3


From b0c4f3222c7406f0aee9d52b7d604a1d36108463 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 8 May 2009 16:23:30 -0400
Subject: Fix the race between capifs remount and node creation

we don't want to deal with half-updated config

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/isdn/capi/capifs.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index 8f9f3b5a3e8..bff72d81f26 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -75,14 +75,17 @@ static int capifs_remount(struct super_block *s, int *flags, char *data)
 		}
 	}
 
-	replace_mount_options(s, new_opt);
+	mutex_lock(&s->s_root->d_inode->i_mutex);
 
+	replace_mount_options(s, new_opt);
 	config.setuid  = setuid;
 	config.setgid  = setgid;
 	config.uid     = uid;
 	config.gid     = gid;
 	config.mode    = mode;
 
+	mutex_unlock(&s->s_root->d_inode->i_mutex);
+
 	return 0;
 }
 
@@ -153,13 +156,16 @@ void capifs_new_ncci(unsigned int number, dev_t device)
 	if (!inode)
 		return;
 	inode->i_ino = number+2;
+
+	dentry = get_node(number);
+
+	/* config contents is protected by root's i_mutex */
 	inode->i_uid = config.setuid ? config.uid : current_fsuid();
 	inode->i_gid = config.setgid ? config.gid : current_fsgid();
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
 	init_special_inode(inode, S_IFCHR|config.mode, device);
 	//inode->i_op = &capifs_file_inode_operations;
 
-	dentry = get_node(number);
 	if (!IS_ERR(dentry) && !dentry->d_inode)
 		d_instantiate(dentry, inode);
 	mutex_unlock(&capifs_root->d_inode->i_mutex);
-- 
cgit v1.2.3


From 9d34d1a20e8171be819a6c8c4de4eea6104d174e Mon Sep 17 00:00:00 2001
From: Florian Westphal <fw@strlen.de>
Date: Fri, 8 May 2009 11:49:11 +0000
Subject: bonding: fix panic if initialization fails

If module initialisation failed (e.g. because the bonding sysfs entry
cannot be created), kernel panics:
 IP: [<ffffffff8024910a>] destroy_workqueue+0x2d/0x146
Call Trace:
 [<ffffffff808268c4>] bond_destructor+0x28/0x78
 [<ffffffff80b64471>] netdev_run_todo+0x231/0x25a
 [<ffffffff80b6dbcd>] rtnl_unlock+0x9/0xb
 [<ffffffff81567907>] bonding_init+0x83e/0x84a

Remove the calls to bond_work_cancel_all() and destroy_workqueue();
both are also called/scheduled via bond_free_all().

bond_destroy_sysfs is unecessary because the sysfs entry has
not been created in the error case.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2188a96fc09..74824028f85 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -5181,7 +5181,6 @@ static int __init bonding_init(void)
 {
 	int i;
 	int res;
-	struct bonding *bond;
 
 	printk(KERN_INFO "%s", version);
 
@@ -5212,13 +5211,6 @@ static int __init bonding_init(void)
 
 	goto out;
 err:
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
-		bond_work_cancel_all(bond);
-		destroy_workqueue(bond->wq);
-	}
-
-	bond_destroy_sysfs();
-
 	rtnl_lock();
 	bond_free_all();
 	rtnl_unlock();
-- 
cgit v1.2.3


From cb1287a82281ab3ddb0768250a46603977075b91 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Fri, 17 Apr 2009 20:50:30 -0300
Subject: V4L/DVB (11575): uvcvideo: fix uvc resume failed

Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should
return packet counts allocated originally during uvc resume, instead of zero.

This version uses round down to return packet counts on Linus' suggestions,
or else may lead to buffer destructed if packet size is changed before
calling uvc_alloc_urb_buffers() in this kind of case.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_video.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index a95e17329c5..6ce974d7362 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,
 
 	/* Buffers are already allocated, bail out. */
 	if (video->urb_size)
-		return 0;
+		return video->urb_size / psize;
 
 	/* Compute the number of packets. Bulk endpoints might transfer UVC
 	 * payloads accross multiple URBs.
-- 
cgit v1.2.3


From 171f48e254339548a910867c7a77c4a4d16e7e16 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 30 Apr 2009 21:03:34 -0300
Subject: V4L/DVB (11660): zoran: fix bug when enumerating format -1

If someone requests a format at fmt->index == (unsigned)-1 and the first
format in the array doesn't have the requested type then num will still be
-1 when it's compared to fmt->index and there will appear to be a match.

Restructure the loop so this can't happen.  It's simpler this way too.  The
unnecessary check for (unsigned)fmt->index < 0 found by Roel Kluin
<roel.kluin@gmail.com> is removed this way too.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/zoran/zoran_driver.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 092333b1c34..643cccaa1aa 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1863,22 +1863,20 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability
 
 static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
 {
-	int num = -1, i;
-
-	for (i = 0; i < NUM_FORMATS; i++) {
-		if (zoran_formats[i].flags & flag)
-			num++;
-		if (num == fmt->index)
-			break;
+	unsigned int num, i;
+
+	for (num = i = 0; i < NUM_FORMATS; i++) {
+		if (zoran_formats[i].flags & flag && num++ == fmt->index) {
+			strncpy(fmt->description, zoran_formats[i].name,
+				sizeof(fmt->description) - 1);
+			/* fmt struct pre-zeroed, so adding '\0' not neeed */
+			fmt->pixelformat = zoran_formats[i].fourcc;
+			if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
+				fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
+			return 0;
+		}
 	}
-	if (fmt->index < 0 /* late, but not too late */  || i == NUM_FORMATS)
-		return -EINVAL;
-
-	strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1);
-	fmt->pixelformat = zoran_formats[i].fourcc;
-	if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
-		fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
-	return 0;
+	return -EINVAL;
 }
 
 static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh,
-- 
cgit v1.2.3


From 1175d6131f7a89c163227169325ca77a22b18cb2 Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 30 Apr 2009 21:03:34 -0300
Subject: V4L/DVB (11661): v4l2-ioctl: Check buffer types using g_fmt instead
 of try_fmt

For a number of different ioctls, the v4l2-ioctl code checks that the
passed buffer type is supported by the driver.  It did this by checking
that the driver defined a method for the try_fmt handler for that buffer
type.  However, try_fmt is optional and a driver might not provide it even
though it does support that type.  So use g_fmt instead, since that isn't
optional.

This should fix a problem with VBI capture with saa7146.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-ioctl.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 88f10d6cbc9..feb42073302 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -544,39 +544,39 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type)
 
 	switch (type) {
 	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (ops->vidioc_try_fmt_vid_cap)
+		if (ops->vidioc_g_fmt_vid_cap)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
-		if (ops->vidioc_try_fmt_vid_overlay)
+		if (ops->vidioc_g_fmt_vid_overlay)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
-		if (ops->vidioc_try_fmt_vid_out)
+		if (ops->vidioc_g_fmt_vid_out)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
-		if (ops->vidioc_try_fmt_vid_out_overlay)
+		if (ops->vidioc_g_fmt_vid_out_overlay)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
-		if (ops->vidioc_try_fmt_vbi_cap)
+		if (ops->vidioc_g_fmt_vbi_cap)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_VBI_OUTPUT:
-		if (ops->vidioc_try_fmt_vbi_out)
+		if (ops->vidioc_g_fmt_vbi_out)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
-		if (ops->vidioc_try_fmt_sliced_vbi_cap)
+		if (ops->vidioc_g_fmt_sliced_vbi_cap)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
-		if (ops->vidioc_try_fmt_sliced_vbi_out)
+		if (ops->vidioc_g_fmt_sliced_vbi_out)
 			return 0;
 		break;
 	case V4L2_BUF_TYPE_PRIVATE:
-		if (ops->vidioc_try_fmt_type_private)
+		if (ops->vidioc_g_fmt_type_private)
 			return 0;
 		break;
 	}
-- 
cgit v1.2.3


From 7ecc0cf937e97b6116db09cd13c32467b34c164a Mon Sep 17 00:00:00 2001
From: Trent Piepho <xyzzy@speakeasy.org>
Date: Thu, 30 Apr 2009 21:03:34 -0300
Subject: V4L/DVB (11662): v4l2-ioctl: Clear buffer type specific trailing
 fields/padding

Some ioctls have structs that are a different size depending on what type
of buffer is being used.  If the buffer type leaves a field unused or has
padding space at the end, this space should be zeroed out.

The problems with S_FMT and REQBUFS were original identified and patched by
Marton Nemeth <nm127@freemail.hu>.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-ioctl.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index feb42073302..be64a502ea2 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -42,6 +42,12 @@
 			printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
 		} while (0)
 
+/* Zero out the end of the struct pointed to by p.  Everthing after, but
+ * not including, the specified field is cleared. */
+#define CLEAR_AFTER_FIELD(p, field) \
+	memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
+	0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field))
+
 struct std_descr {
 	v4l2_std_id std;
 	const char *descr;
@@ -782,44 +788,53 @@ static long __video_do_ioctl(struct file *file,
 
 		switch (f->type) {
 		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			if (ops->vidioc_s_fmt_vid_cap)
 				ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_s_fmt_vid_overlay)
 				ret = ops->vidioc_s_fmt_vid_overlay(file,
 								    fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			if (ops->vidioc_s_fmt_vid_out)
 				ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_s_fmt_vid_out_overlay)
 				ret = ops->vidioc_s_fmt_vid_out_overlay(file,
 					fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_s_fmt_vbi_cap)
 				ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_s_fmt_vbi_out)
 				ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_s_fmt_sliced_vbi_cap)
 				ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
 									fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_s_fmt_sliced_vbi_out)
 				ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
 									fh, f);
 			break;
 		case V4L2_BUF_TYPE_PRIVATE:
+			/* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
 			if (ops->vidioc_s_fmt_type_private)
 				ret = ops->vidioc_s_fmt_type_private(file,
 								fh, f);
@@ -836,46 +851,55 @@ static long __video_do_ioctl(struct file *file,
 						v4l2_type_names));
 		switch (f->type) {
 		case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			if (ops->vidioc_try_fmt_vid_cap)
 				ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
 			if (!ret)
 				v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_try_fmt_vid_overlay)
 				ret = ops->vidioc_try_fmt_vid_overlay(file,
 					fh, f);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.pix);
 			if (ops->vidioc_try_fmt_vid_out)
 				ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
 			if (!ret)
 				v4l_print_pix_fmt(vfd, &f->fmt.pix);
 			break;
 		case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+			CLEAR_AFTER_FIELD(f, fmt.win);
 			if (ops->vidioc_try_fmt_vid_out_overlay)
 				ret = ops->vidioc_try_fmt_vid_out_overlay(file,
 				       fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_try_fmt_vbi_cap)
 				ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.vbi);
 			if (ops->vidioc_try_fmt_vbi_out)
 				ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_try_fmt_sliced_vbi_cap)
 				ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
 								fh, f);
 			break;
 		case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+			CLEAR_AFTER_FIELD(f, fmt.sliced);
 			if (ops->vidioc_try_fmt_sliced_vbi_out)
 				ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
 								fh, f);
 			break;
 		case V4L2_BUF_TYPE_PRIVATE:
+			/* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
 			if (ops->vidioc_try_fmt_type_private)
 				ret = ops->vidioc_try_fmt_type_private(file,
 								fh, f);
@@ -898,6 +922,9 @@ static long __video_do_ioctl(struct file *file,
 		if (ret)
 			break;
 
+		if (p->type < V4L2_BUF_TYPE_PRIVATE)
+			CLEAR_AFTER_FIELD(p, memory);
+
 		ret = ops->vidioc_reqbufs(file, fh, p);
 		dbgarg(cmd, "count=%d, type=%s, memory=%s\n",
 				p->count,
-- 
cgit v1.2.3


From 52c3d29cfa2fa02f525a01abf28abf48f49801bf Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@linuxtv.org>
Date: Mon, 20 Apr 2009 22:42:00 -0300
Subject: V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500

The boards control struct wasn't updated when (presumably) all of the
other drivers migrated from using scode_table to specifying the demod.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx23885/cx23885-dvb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 0c49a98213c..1dc070da865 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -472,7 +472,7 @@ static int dvb_register(struct cx23885_tsport *port)
 			static struct xc2028_ctrl ctl = {
 				.fname       = XC2028_DEFAULT_FIRMWARE,
 				.max_len     = 64,
-				.scode_table = XC3028_FE_OREN538,
+				.demod       = XC3028_FE_OREN538,
 			};
 
 			fe = dvb_attach(xc2028_attach,
-- 
cgit v1.2.3


From 34a7864db1bc6d9ceb466251957fccf90c7106f8 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 07:56:46 -0300
Subject: V4L/DVB (11668): ivtv: fix compiler warning.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-driver.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index b0195e8ee4d..db2ac9a99ac 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -305,14 +305,17 @@ int ivtv_waitq(wait_queue_head_t *waitq)
 /* Generic utility functions */
 int ivtv_msleep_timeout(unsigned int msecs, int intr)
 {
-	int ret;
 	int timeout = msecs_to_jiffies(msecs);
 
 	do {
 		set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
 		timeout = schedule_timeout(timeout);
-		if (intr && (ret = signal_pending(current)))
-			return ret;
+		if (intr) {
+			int ret = signal_pending(current);
+
+			if (ret)
+				return ret;
+		}
 	} while (timeout);
 	return 0;
 }
-- 
cgit v1.2.3


From 7564f67d5b38eb814e67edd8ba0c70fd8eb475b6 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 08:12:36 -0300
Subject: V4L/DVB (11669): uvc: fix compile warning

The 2.6.30 kernel generates this warning:

uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function

I guess some new warning flag must have been turned on since this warning
didn't appear with older kernels (gcc version 4.3.1). It's also a bogus
warning, but since this code didn't comply to the coding standard anyway
I've modified it to 1) remove the warning and 2) conform to the coding
standard.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/uvc/uvc_driver.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 399412d7f02..507dc85646b 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1726,14 +1726,17 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
 static int __uvc_resume(struct usb_interface *intf, int reset)
 {
 	struct uvc_device *dev = usb_get_intfdata(intf);
-	int ret;
 
 	uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n",
 		intf->cur_altsetting->desc.bInterfaceNumber);
 
 	if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) {
-		if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0)
-			return ret;
+		if (reset) {
+			int ret = uvc_ctrl_resume_device(dev);
+
+			if (ret < 0)
+				return ret;
+		}
 
 		return uvc_status_resume(dev);
 	}
-- 
cgit v1.2.3


From ec105a42ac397366e05888ea96503ab3b57f79ad Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 11:10:23 -0300
Subject: V4L/DVB (11674): ivtv: fix incorrect bit tests

Found the coccinelle tool.

Thanks-to: Julia Lawall <julia@diku.dk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/ivtv/ivtv-ioctl.c | 5 +++--
 drivers/media/video/ivtv/ivtv-irq.c   | 2 +-
 drivers/media/video/ivtv/ivtv-yuv.c   | 3 ++-
 drivers/media/video/ivtv/ivtvfb.c     | 3 ++-
 4 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 4a2d464f055..c342a9fe983 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -180,7 +180,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed)
 
 		/* Wait for any DMA to finish */
 		prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
-		while (itv->i_flags & IVTV_F_I_DMA) {
+		while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
 			got_sig = signal_pending(current);
 			if (got_sig)
 				break;
@@ -1710,7 +1710,8 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg)
 			   we are waiting unlock first and later lock again. */
 			mutex_unlock(&itv->serialize_lock);
 			prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE);
-			if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0)
+			if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) &&
+			    !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags))
 				schedule();
 			finish_wait(&itv->event_waitq, &wait);
 			mutex_lock(&itv->serialize_lock);
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index 01c14d2b381..cd9db0bf33b 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -196,7 +196,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
 				bytes_needed, s->name);
 		return -1;
 	}
-	if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) {
+	if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) {
 		IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name);
 		IVTV_WARN("Cause: the application is not reading fast enough.\n");
 	}
diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c
index 7912ed6b72e..c0875378acc 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.c
+++ b/drivers/media/video/ivtv/ivtv-yuv.c
@@ -1063,7 +1063,8 @@ static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
 	prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
 	/* if no UDMA is pending and no UDMA is in progress, then the DMA
 	   is finished */
-	while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+	while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+	       test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
 		/* don't interrupt if the DMA is in progress but break off
 		   a still pending DMA. */
 		got_sig = signal_pending(current);
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 66e6eb51307..fa6bb85cb4b 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -298,7 +298,8 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv,
 	prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
 	/* if no UDMA is pending and no UDMA is in progress, then the DMA
 	   is finished */
-	while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+	while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+	       test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
 		/* don't interrupt if the DMA is in progress but break off
 		   a still pending DMA. */
 		got_sig = signal_pending(current);
-- 
cgit v1.2.3


From dc47b77897b33fca328bd4cd487224808b740ce3 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sat, 2 May 2009 11:52:35 -0300
Subject: V4L/DVB (11675): ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB
 confusion

V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have
been used.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/radio-sf16fmi.c  | 2 +-
 drivers/media/radio/radio-sf16fmr2.c | 2 +-
 drivers/media/video/ivtv/ivtv-gpio.c | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 1dba8f0832a..5cf6c45b91f 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -153,7 +153,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
 	v->rangelow = RSF16_MINFREQ / mult;
 	v->rangehigh = RSF16_MAXFREQ / mult;
-	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 	v->capability = fmi->flags & V4L2_TUNER_CAP_LOW;
 	v->audmode = V4L2_TUNER_MODE_STEREO;
 	v->signal = fmi_getsigstr(fmi);
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index c09ca8600ea..935ff9bcdfc 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -233,7 +233,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
 	v->rangelow = RSF16_MINFREQ / mult;
 	v->rangehigh = RSF16_MAXFREQ / mult;
-	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 	v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW;
 	v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO:
 				V4L2_TUNER_MODE_MONO;
diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c
index ceb05bdcaf6..85ac707228e 100644
--- a/drivers/media/video/ivtv/ivtv-gpio.c
+++ b/drivers/media/video/ivtv/ivtv-gpio.c
@@ -190,8 +190,8 @@ static int subdev_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 
 	mask = itv->card->gpio_audio_detect.mask;
 	if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask))
-		vt->rxsubchans = V4L2_TUNER_MODE_STEREO |
-			V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2;
+		vt->rxsubchans = V4L2_TUNER_SUB_STEREO |
+			V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
 	else
 		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
 	return 0;
-- 
cgit v1.2.3


From e047a0f57dabd57957c9dab744a02da01d445b0a Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Sun, 3 May 2009 04:58:04 -0300
Subject: V4L/DVB (11679): cafe_ccic: fix sensor detection

Due to an uninitialized chip.ident field the chip identification failed.

Thanks-to: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cafe_ccic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 5f582726985..e2d49cdb9d7 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -774,6 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam)
 	ret = __cafe_cam_reset(cam);
 	if (ret)
 		goto out;
+	chip.ident == V4L2_IDENT_NONE;
 	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
 	chip.match.addr = cam->sensor_addr;
 	ret = sensor_call(cam, core, g_chip_ident, &chip);
-- 
cgit v1.2.3


From 90c69f29cfc436b21a3181f8034f19f74543507a Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue, 5 May 2009 08:08:38 -0300
Subject: V4L/DVB (11680): cafe_ccic: use = instead of == for setting a value
 at a var

/home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init':
/home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: saeed bishara <saeed.bishara@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cafe_ccic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index e2d49cdb9d7..c4d181dde1c 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -774,7 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam)
 	ret = __cafe_cam_reset(cam);
 	if (ret)
 		goto out;
-	chip.ident == V4L2_IDENT_NONE;
+	chip.ident = V4L2_IDENT_NONE;
 	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
 	chip.match.addr = cam->sensor_addr;
 	ret = sensor_call(cam, core, g_chip_ident, &chip);
-- 
cgit v1.2.3


From 384943ec1bb462e410390ad8f108ff1474cd882d Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Fri, 8 May 2009 18:20:43 -0700
Subject: Bluetooth: Fix wrong module refcount when connection setup fails

The module refcount is increased by hci_dev_hold() call in hci_conn_add()
and decreased by hci_dev_put() call in del_conn(). In case the connection
setup fails, hci_dev_put() is never called.

Procedure to reproduce the issue:

  # hciconfig hci0 up
  # lsmod | grep btusb                   -> "used by" refcount = 1

  # hcitool cc <non-exisiting bdaddr>    -> will get timeout

  # lsmod | grep btusb                   -> "used by" refcount = 2
  # hciconfig hci0 down
  # lsmod | grep btusb                   -> "used by" refcount = 1
  # rmmod btusb                          -> ERROR: Module btusb is in use

The hci_dev_put() call got moved into del_conn() with the 2.6.25 kernel
to fix an issue with hci_dev going away before hci_conn. However that
change was wrong and introduced this problem.

When calling hci_conn_del() it has to call hci_dev_put() after freeing
the connection details. This handling should be fully symmetric. The
execution of del_conn() is done in a work queue and needs it own calls
to hci_dev_hold() and hci_dev_put() to ensure that the hci_dev stays
until the connection cleanup has been finished.

Based on a report by Bing Zhao <bzhao@marvell.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Bing Zhao <bzhao@marvell.com>
---
 net/bluetooth/hci_conn.c  | 2 ++
 net/bluetooth/hci_sysfs.c | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 61309b26f27..85a1c6be2db 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -292,6 +292,8 @@ int hci_conn_del(struct hci_conn *conn)
 
 	hci_conn_del_sysfs(conn);
 
+	hci_dev_put(hdev);
+
 	return 0;
 }
 
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index a05d45eb3ba..4cc3624bd22 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -99,6 +99,8 @@ static void add_conn(struct work_struct *work)
 		BT_ERR("Failed to register connection device");
 		return;
 	}
+
+	hci_dev_hold(hdev);
 }
 
 /*
@@ -134,6 +136,7 @@ static void del_conn(struct work_struct *work)
 
 	device_del(&conn->dev);
 	put_device(&conn->dev);
+
 	hci_dev_put(hdev);
 }
 
-- 
cgit v1.2.3


From 1b0336bb36f88976f1210a65b62f6a3e9578ee7b Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Sat, 9 May 2009 12:04:08 -0700
Subject: Bluetooth: Don't use hci_acl_connect_cancel() for incoming
 connections

The connection setup phase takes around 2 seconds or longer and in
that time it is possible that the need for an ACL connection is no
longer present. If that happens then, the connection attempt will
be canceled.

This only applies to outgoing connections, but currently it can also
be triggered by incoming connection. Don't call hci_acl_connect_cancel()
on incoming connection since these have to be either accepted or rejected
in this state. Once they are successfully connected they need to be
fully disconnected anyway.

Also remove the wrong hci_acl_disconn() call for SCO and eSCO links
since at this stage they can't be disconnected either, because the
connection handle is still unknown.

Based on a report by Johan Hedberg <johan.hedberg@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>
---
 net/bluetooth/hci_conn.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 85a1c6be2db..fa47d5d84f5 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -171,10 +171,8 @@ static void hci_conn_timeout(unsigned long arg)
 	switch (conn->state) {
 	case BT_CONNECT:
 	case BT_CONNECT2:
-		if (conn->type == ACL_LINK)
+		if (conn->type == ACL_LINK && conn->out)
 			hci_acl_connect_cancel(conn);
-		else
-			hci_acl_disconn(conn, 0x13);
 		break;
 	case BT_CONFIG:
 	case BT_CONNECTED:
-- 
cgit v1.2.3


From 3d7a9d1c7ee251a04095d43eec5a3f4ff3f710a8 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Sat, 9 May 2009 12:09:21 -0700
Subject: Bluetooth: Don't trigger disconnect timeout for security mode 3
 pairing

A remote device in security mode 3 that tries to connect will require
the pairing during the connection setup phase. The disconnect timeout
is now triggered within 10 milliseconds and causes the pairing to fail.

If a connection is not fully established and a PIN code request is
received, don't trigger the disconnect timeout. The either successful
or failing connection complete event will make sure that the timeout
is triggered at the right time.

The biggest problem with security mode 3 is that many Bluetooth 2.0
device and before use a temporary security mode 3 for dedicated
bonding.

Based on a report by Johan Hedberg <johan.hedberg@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>
---
 net/bluetooth/hci_event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 4e7cb88e5da..184ba0a88ec 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1493,7 +1493,7 @@ static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
-	if (conn) {
+	if (conn && conn->state == BT_CONNECTED) {
 		hci_conn_hold(conn);
 		conn->disc_timeout = HCI_PAIRING_TIMEOUT;
 		hci_conn_put(conn);
-- 
cgit v1.2.3


From b74d446f1f337e3fe906169a3266cb65ffa4179e Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sat, 9 May 2009 15:35:10 +0600
Subject: x86: Fix false positive section mismatch warnings in the apic code

[ Impact: reduce kernel image size a bit, annotate away warnings ]

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[ modified and tested it ]
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
LKML-Reference: <b9df5fa10905090235s4bfd26a8o979f93809c9727ad@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/es7000_32.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 1c11b819f24..30294777557 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -254,7 +254,7 @@ static int parse_unisys_oem(char *oemptr)
 }
 
 #ifdef CONFIG_ACPI
-static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
 {
 	struct acpi_table_header *header = NULL;
 	struct es7000_oem_table *table;
@@ -285,7 +285,7 @@ static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
 	return 0;
 }
 
-static void unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
 {
 	if (!oem_addr)
 		return;
@@ -306,7 +306,7 @@ static int es7000_check_dsdt(void)
 static int es7000_acpi_ret;
 
 /* Hook from generic ACPI tables.c */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	unsigned long oem_addr = 0;
 	int check_dsdt;
@@ -717,7 +717,7 @@ struct apic apic_es7000_cluster = {
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
 };
 
-struct apic apic_es7000 = {
+struct apic __refdata apic_es7000 = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
-- 
cgit v1.2.3


From 843382370ec614768ac13582405f93635cf3637c Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Tue, 5 May 2009 21:52:06 +0900
Subject: nilfs2: ensure to clear dirty state when deleting metadata file block

This would fix the following failure during GC:

 nilfs_cpfile_delete_checkpoints: cannot delete block
 NILFS: GC failed during preparation: cannot delete checkpoints: err=-2

The problem was caused by a break in state consistency between page
cache and btree; the above block was removed from the btree but the
page buffering the block was remaining in the page cache in dirty
state.

This resolves the inconsistency by ensuring to clear dirty state of
the page buffering the deleted block.

Reported-by: David Arendt <admin@prnet.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/mdt.c  | 2 +-
 fs/nilfs2/page.c | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index e1c6777931b..bb78745a0e3 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -300,7 +300,7 @@ int nilfs_mdt_delete_block(struct inode *inode, unsigned long block)
 	int err;
 
 	err = nilfs_bmap_delete(ii->i_bmap, block);
-	if (likely(!err)) {
+	if (!err || err == -ENOENT) {
 		nilfs_mdt_mark_dirty(inode);
 		nilfs_mdt_forget_block(inode, block);
 	}
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 1bfbba9c0e9..a2692bbc7b5 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -128,7 +128,8 @@ void nilfs_forget_buffer(struct buffer_head *bh)
 
 	lock_buffer(bh);
 	clear_buffer_nilfs_volatile(bh);
-	if (test_clear_buffer_dirty(bh) && nilfs_page_buffers_clean(page))
+	clear_buffer_dirty(bh);
+	if (nilfs_page_buffers_clean(page))
 		__nilfs_clear_page_dirty(page);
 
 	clear_buffer_uptodate(bh);
-- 
cgit v1.2.3


From 47eb6b9c8fa963c9f49967ad1d9d7ec947d15b68 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Thu, 30 Apr 2009 02:21:00 +0900
Subject: nilfs2: fix possible circular locking for get information ioctls

This is one of two patches which are to correct possible circular
locking between mm->mmap_sem and nilfs->ns_segctor_sem.

The problem was detected by lockdep check as follows:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00002-g3552613 #6
 -------------------------------------------------------
 mmap/5418 is trying to acquire lock:
 (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
 (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
 [<c01470a5>] __lock_acquire+0x1066/0x13b0
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<c01836bc>] might_fault+0x68/0x88
 [<c023c730>] copy_to_user+0x2c/0xfc
 [<d0d11b4f>] nilfs_ioctl_wrap_copy+0x103/0x160 [nilfs2]
 [<d0d11fa9>] nilfs_ioctl+0x30a/0x3b0 [nilfs2]
 [<c01a3be7>] vfs_ioctl+0x22/0x69
 [<c01a408e>] do_vfs_ioctl+0x460/0x499
 [<c01a4107>] sys_ioctl+0x40/0x5a
 [<c01031a4>] sysenter_do_call+0x12/0x38
 [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
 [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<c0433f1d>] down_read+0x2a/0x3e
 [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
 [<c0183b0b>] __do_fault+0x165/0x376
 [<c01855cd>] handle_mm_fault+0x287/0x5d1
 [<c043712d>] do_page_fault+0x2fb/0x30a
 [<c0435462>] error_code+0x72/0x78
 [<ffffffff>] 0xffffffff

 other info that might help us debug this:

 1 lock held by mmap/5418:
 #0:  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 stack backtrace:
 Pid: 5418, comm: mmap Not tainted 2.6.30-rc3-nilfs-00002-g3552613 #6
 Call Trace:
 [<c0432145>] ? printk+0xf/0x12
 [<c0145c48>] print_circular_bug_tail+0xaa/0xb5
 [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
 [<d0d10149>] ? nilfs_sufile_get_stat+0x1e/0x105 [nilfs2]
 [<c013b59a>] ? up_read+0x16/0x2c
 [<d0d10225>] ? nilfs_sufile_get_stat+0xfa/0x105 [nilfs2]
 [<c01474a9>] lock_acquire+0xba/0xdd
 [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<c0433f1d>] down_read+0x2a/0x3e
 [<d0d0e852>] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0d0e852>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
 [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
 [<c0183b0b>] __do_fault+0x165/0x376
 [<c01855cd>] handle_mm_fault+0x287/0x5d1
 [<c043700a>] ? do_page_fault+0x1d8/0x30a
 [<c013b54f>] ? down_read_trylock+0x39/0x43
 [<c043712d>] do_page_fault+0x2fb/0x30a
 [<c0436e32>] ? do_page_fault+0x0/0x30a
 [<c0435462>] error_code+0x72/0x78
 [<c0436e32>] ? do_page_fault+0x0/0x30a

This makes the lock granularity of nilfs->ns_segctor_sem finer than
that of the mmap semaphore for ioctl commands except
nilfs_clean_segments().

The successive patch ("nilfs2: fix lock order reversal in
nilfs_clean_segments ioctl") is required to fully resolve the problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c | 100 +++++++++++++++++++++---------------------------------
 1 file changed, 38 insertions(+), 62 deletions(-)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index be387c6b2d4..e3c693d37d6 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -147,29 +147,12 @@ static ssize_t
 nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			  void *buf, size_t size, size_t nmembs)
 {
-	return nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
-				       nmembs);
-}
-
-static int nilfs_ioctl_get_cpinfo(struct inode *inode, struct file *filp,
-				  unsigned int cmd, void __user *argp)
-{
-	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
-	struct nilfs_argv argv;
 	int ret;
 
-	if (copy_from_user(&argv, argp, sizeof(argv)))
-		return -EFAULT;
-
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
-				    nilfs_ioctl_do_get_cpinfo);
+	ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
+				      nmembs);
 	up_read(&nilfs->ns_segctor_sem);
-	if (ret < 0)
-		return ret;
-
-	if (copy_to_user(argp, &argv, sizeof(argv)))
-		ret = -EFAULT;
 	return ret;
 }
 
@@ -195,28 +178,11 @@ static ssize_t
 nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			  void *buf, size_t size, size_t nmembs)
 {
-	return nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
-}
-
-static int nilfs_ioctl_get_suinfo(struct inode *inode, struct file *filp,
-				  unsigned int cmd, void __user *argp)
-{
-	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
-	struct nilfs_argv argv;
 	int ret;
 
-	if (copy_from_user(&argv, argp, sizeof(argv)))
-		return -EFAULT;
-
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
-				    nilfs_ioctl_do_get_suinfo);
+	ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
-	if (ret < 0)
-		return ret;
-
-	if (copy_to_user(argp, &argv, sizeof(argv)))
-		ret = -EFAULT;
 	return ret;
 }
 
@@ -242,28 +208,11 @@ static ssize_t
 nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
 			 void *buf, size_t size, size_t nmembs)
 {
-	return nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
-}
-
-static int nilfs_ioctl_get_vinfo(struct inode *inode, struct file *filp,
-				 unsigned int cmd, void __user *argp)
-{
-	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
-	struct nilfs_argv argv;
 	int ret;
 
-	if (copy_from_user(&argv, argp, sizeof(argv)))
-		return -EFAULT;
-
 	down_read(&nilfs->ns_segctor_sem);
-	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
-				    nilfs_ioctl_do_get_vinfo);
+	ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
 	up_read(&nilfs->ns_segctor_sem);
-	if (ret < 0)
-		return ret;
-
-	if (copy_to_user(argp, &argv, sizeof(argv)))
-		ret = -EFAULT;
 	return ret;
 }
 
@@ -276,17 +225,21 @@ nilfs_ioctl_do_get_bdescs(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	struct nilfs_bdesc *bdescs = buf;
 	int ret, i;
 
+	down_read(&nilfs->ns_segctor_sem);
 	for (i = 0; i < nmembs; i++) {
 		ret = nilfs_bmap_lookup_at_level(bmap,
 						 bdescs[i].bd_offset,
 						 bdescs[i].bd_level + 1,
 						 &bdescs[i].bd_blocknr);
 		if (ret < 0) {
-			if (ret != -ENOENT)
+			if (ret != -ENOENT) {
+				up_read(&nilfs->ns_segctor_sem);
 				return ret;
+			}
 			bdescs[i].bd_blocknr = 0;
 		}
 	}
+	up_read(&nilfs->ns_segctor_sem);
 	return nmembs;
 }
 
@@ -300,10 +253,8 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
-	down_read(&nilfs->ns_segctor_sem);
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
 				    nilfs_ioctl_do_get_bdescs);
-	up_read(&nilfs->ns_segctor_sem);
 	if (ret < 0)
 		return ret;
 
@@ -623,6 +574,29 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
 	return 0;
 }
 
+static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
+				unsigned int cmd, void __user *argp,
+				ssize_t (*dofunc)(struct the_nilfs *,
+						  __u64 *, int,
+						  void *, size_t, size_t))
+
+{
+	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+	struct nilfs_argv argv;
+	int ret;
+
+	if (copy_from_user(&argv, argp, sizeof(argv)))
+		return -EFAULT;
+
+	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
+	if (ret < 0)
+		return ret;
+
+	if (copy_to_user(argp, &argv, sizeof(argv)))
+		ret = -EFAULT;
+	return ret;
+}
+
 long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	struct inode *inode = filp->f_dentry->d_inode;
@@ -634,16 +608,18 @@ long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	case NILFS_IOCTL_DELETE_CHECKPOINT:
 		return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_CPINFO:
-		return nilfs_ioctl_get_cpinfo(inode, filp, cmd, argp);
+		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    nilfs_ioctl_do_get_cpinfo);
 	case NILFS_IOCTL_GET_CPSTAT:
 		return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_SUINFO:
-		return nilfs_ioctl_get_suinfo(inode, filp, cmd, argp);
+		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    nilfs_ioctl_do_get_suinfo);
 	case NILFS_IOCTL_GET_SUSTAT:
 		return nilfs_ioctl_get_sustat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_VINFO:
-		/* XXX: rename to ??? */
-		return nilfs_ioctl_get_vinfo(inode, filp, cmd, argp);
+		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    nilfs_ioctl_do_get_vinfo);
 	case NILFS_IOCTL_GET_BDESCS:
 		return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp);
 	case NILFS_IOCTL_CLEAN_SEGMENTS:
-- 
cgit v1.2.3


From 4f6b828837b4e3836f2c9ac2f0eab9773b6c1327 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Sun, 10 May 2009 22:41:43 +0900
Subject: nilfs2: fix lock order reversal in nilfs_clean_segments ioctl

This is a companion patch to ("nilfs2: fix possible circular locking
for get information ioctls").

This corrects lock order reversal between mm->mmap_sem and
nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by
lockdep check:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00003-g360bdc1 #7
 -------------------------------------------------------
 mmap/5294 is trying to acquire lock:
  (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
        [<c01470a5>] __lock_acquire+0x1066/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c01836bc>] might_fault+0x68/0x88
        [<c023c61d>] copy_from_user+0x2a/0x111
        [<d0d120d0>] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2]
        [<d0d0e2aa>] nilfs_clean_segments+0x6d/0x1b9 [nilfs2]
        [<d0d11f68>] nilfs_ioctl+0x2ad/0x318 [nilfs2]
        [<c01a3be7>] vfs_ioctl+0x22/0x69
        [<c01a408e>] do_vfs_ioctl+0x460/0x499
        [<c01a4107>] sys_ioctl+0x40/0x5a
        [<c01031a4>] sysenter_do_call+0x12/0x38
        [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
        [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c0433f1d>] down_read+0x2a/0x3e
        [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
        [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
        [<c0183b0b>] __do_fault+0x165/0x376
        [<c01855cd>] handle_mm_fault+0x287/0x5d1
        [<c043712d>] do_page_fault+0x2fb/0x30a
        [<c0435462>] error_code+0x72/0x78
        [<ffffffff>] 0xffffffff

where nilfs_clean_segments() holds:

  nilfs->ns_segctor_sem -> copy_from_user()
                             --> page fault -> mm->mmap_sem

And, page fault path may hold:

  page fault -> mm->mmap_sem
         --> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem

Even though nilfs_clean_segments() does not perform write access on
given user pages, it may cause deadlock because nilfs->ns_segctor_sem
is shared per device and mm->mmap_sem can be shared with other tasks.

To avoid this problem, this patch moves all calls of copy_from_user()
outside the nilfs->ns_segctor_sem lock in the ioctl.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c   | 163 ++++++++++++++++++++++++++++++----------------------
 fs/nilfs2/nilfs.h   |   3 +-
 fs/nilfs2/segment.c |   5 +-
 fs/nilfs2/segment.h |   3 +-
 4 files changed, 100 insertions(+), 74 deletions(-)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index e3c693d37d6..49489f68eab 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -25,6 +25,7 @@
 #include <linux/smp_lock.h>	/* lock_kernel(), unlock_kernel() */
 #include <linux/capability.h>	/* capable() */
 #include <linux/uaccess.h>	/* copy_from_user(), copy_to_user() */
+#include <linux/vmalloc.h>
 #include <linux/nilfs2_fs.h>
 #include "nilfs.h"
 #include "segment.h"
@@ -297,10 +298,10 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode,
 	return 0;
 }
 
-static ssize_t
-nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
-			   void *buf, size_t size, size_t nmembs)
+static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
+				   struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct inode *inode;
 	struct nilfs_vdesc *vdesc;
 	struct buffer_head *bh, *n;
@@ -361,19 +362,10 @@ nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	return ret;
 }
 
-static inline int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
-					  struct nilfs_argv *argv,
-					  int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_move_blocks);
-}
-
-static ssize_t
-nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
-				  int flags, void *buf, size_t size,
-				  size_t nmembs)
+static int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
+					  struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct inode *cpfile = nilfs->ns_cpfile;
 	struct nilfs_period *periods = buf;
 	int ret, i;
@@ -387,36 +379,21 @@ nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
 	return nmembs;
 }
 
-static inline int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
-						 struct nilfs_argv *argv,
-						 int dir)
+static int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
+				      struct nilfs_argv *argv, void *buf)
 {
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_delete_checkpoints);
-}
+	size_t nmembs = argv->v_nmembs;
+	int ret;
 
-static ssize_t
-nilfs_ioctl_do_free_vblocknrs(struct the_nilfs *nilfs, __u64 *posp, int flags,
-			      void *buf, size_t size, size_t nmembs)
-{
-	int ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
+	ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
 
 	return (ret < 0) ? ret : nmembs;
 }
 
-static inline int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
-					     struct nilfs_argv *argv,
-					     int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_free_vblocknrs);
-}
-
-static ssize_t
-nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
-				 int flags, void *buf, size_t size,
-				 size_t nmembs)
+static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
+					 struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct inode *dat = nilfs_dat_inode(nilfs);
 	struct nilfs_bmap *bmap = NILFS_I(dat)->i_bmap;
 	struct nilfs_bdesc *bdescs = buf;
@@ -455,18 +432,10 @@ nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
 	return nmembs;
 }
 
-static inline int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
-						struct nilfs_argv *argv,
-						int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_mark_blocks_dirty);
-}
-
-static ssize_t
-nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
-			     void *buf, size_t size, size_t nmembs)
+static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
+				     struct nilfs_argv *argv, void *buf)
 {
+	size_t nmembs = argv->v_nmembs;
 	struct nilfs_sb_info *sbi = nilfs->ns_writer;
 	int ret;
 
@@ -481,31 +450,19 @@ nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
 	return (ret < 0) ? ret : nmembs;
 }
 
-static inline int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
-					     struct nilfs_argv *argv,
-					     int dir)
-{
-	return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
-				     nilfs_ioctl_do_free_segments);
-}
-
 int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
-				       void __user *argp)
+				       struct nilfs_argv *argv, void **kbufs)
 {
-	struct nilfs_argv argv[5];
 	const char *msg;
-	int dir, ret;
-
-	if (copy_from_user(argv, argp, sizeof(argv)))
-		return -EFAULT;
+	int ret;
 
-	dir = _IOC_WRITE;
-	ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], dir);
+	ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]);
 	if (ret < 0) {
 		msg = "cannot read source blocks";
 		goto failed;
 	}
-	ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], dir);
+
+	ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], kbufs[1]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because checkpoints can be removed
@@ -514,7 +471,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot delete checkpoints";
 		goto failed;
 	}
-	ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], dir);
+	ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], kbufs[2]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because DAT file is updated atomically
@@ -523,7 +480,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot delete virtual blocks from DAT file";
 		goto failed;
 	}
-	ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], dir);
+	ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], kbufs[3]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because the operation is nondestructive.
@@ -531,7 +488,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 		msg = "cannot mark copying blocks dirty";
 		goto failed;
 	}
-	ret = nilfs_ioctl_free_segments(nilfs, &argv[4], dir);
+	ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]);
 	if (ret < 0) {
 		/*
 		 * can safely abort because this operation is atomic.
@@ -551,9 +508,75 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
 static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,
 				      unsigned int cmd, void __user *argp)
 {
+	struct nilfs_argv argv[5];
+	const static size_t argsz[5] = {
+		sizeof(struct nilfs_vdesc),
+		sizeof(struct nilfs_period),
+		sizeof(__u64),
+		sizeof(struct nilfs_bdesc),
+		sizeof(__u64),
+	};
+	void __user *base;
+	void *kbufs[5];
+	struct the_nilfs *nilfs;
+	size_t len, nsegs;
+	int n, ret;
+
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
-	return nilfs_clean_segments(inode->i_sb, argp);
+
+	if (copy_from_user(argv, argp, sizeof(argv)))
+		return -EFAULT;
+
+	nsegs = argv[4].v_nmembs;
+	if (argv[4].v_size != argsz[4])
+		return -EINVAL;
+	/*
+	 * argv[4] points to segment numbers this ioctl cleans.  We
+	 * use kmalloc() for its buffer because memory used for the
+	 * segment numbers is enough small.
+	 */
+	kbufs[4] = memdup_user((void __user *)(unsigned long)argv[4].v_base,
+			       nsegs * sizeof(__u64));
+	if (IS_ERR(kbufs[4]))
+		return PTR_ERR(kbufs[4]);
+
+	nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+
+	for (n = 0; n < 4; n++) {
+		ret = -EINVAL;
+		if (argv[n].v_size != argsz[n])
+			goto out_free;
+
+		if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
+			goto out_free;
+
+		len = argv[n].v_size * argv[n].v_nmembs;
+		base = (void __user *)(unsigned long)argv[n].v_base;
+		if (len == 0) {
+			kbufs[n] = NULL;
+			continue;
+		}
+
+		kbufs[n] = vmalloc(len);
+		if (!kbufs[n]) {
+			ret = -ENOMEM;
+			goto out_free;
+		}
+		if (copy_from_user(kbufs[n], base, len)) {
+			ret = -EFAULT;
+			vfree(kbufs[n]);
+			goto out_free;
+		}
+	}
+
+	ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+
+ out_free:
+	while (--n > 0)
+		vfree(kbufs[n]);
+	kfree(kbufs[4]);
+	return ret;
 }
 
 static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 3d0c18a16db..da6fc0bba2e 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -236,7 +236,8 @@ extern int nilfs_sync_file(struct file *, struct dentry *, int);
 
 /* ioctl.c */
 long nilfs_ioctl(struct file *, unsigned int, unsigned long);
-int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, void __user *);
+int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, struct nilfs_argv *,
+				       void **);
 
 /* inode.c */
 extern struct inode *nilfs_new_inode(struct inode *, int);
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index fb70ec3be20..22c7f65c240 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2589,7 +2589,8 @@ nilfs_remove_written_gcinodes(struct the_nilfs *nilfs, struct list_head *head)
 	}
 }
 
-int nilfs_clean_segments(struct super_block *sb, void __user *argp)
+int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
+			 void **kbufs)
 {
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
 	struct nilfs_sc_info *sci = NILFS_SC(sbi);
@@ -2606,7 +2607,7 @@ int nilfs_clean_segments(struct super_block *sb, void __user *argp)
 	err = nilfs_init_gcdat_inode(nilfs);
 	if (unlikely(err))
 		goto out_unlock;
-	err = nilfs_ioctl_prepare_clean_segments(nilfs, argp);
+	err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs);
 	if (unlikely(err))
 		goto out_unlock;
 
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index a98fc1ed0bb..476bdd5df5b 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -222,7 +222,8 @@ extern int nilfs_construct_segment(struct super_block *);
 extern int nilfs_construct_dsync_segment(struct super_block *, struct inode *,
 					 loff_t, loff_t);
 extern void nilfs_flush_segment(struct super_block *, ino_t);
-extern int nilfs_clean_segments(struct super_block *, void __user *);
+extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *,
+				void **);
 
 extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *,
 						  __u64 *, size_t);
-- 
cgit v1.2.3


From 19bca6ab75d8118ae970fcc656359ddb467ac763 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Tue, 28 Apr 2009 12:45:30 +0200
Subject: KVM: SVM: Fix cross vendor migration issue with unusable bit

AMDs VMCB does not have an explicit unusable segment descriptor field,
so we emulate it by using "not present". This has to be setup before
the fixups, because this field is used there.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1821c207819..9184e32778a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -796,6 +796,11 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 	var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
 	var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
 
+	/* AMD's VMCB does not have an explicit unusable field, so emulate it
+	 * for cross vendor migration purposes by "not present"
+	 */
+	var->unusable = !var->present || (var->type == 0);
+
 	switch (seg) {
 	case VCPU_SREG_CS:
 		/*
@@ -827,8 +832,6 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 			var->type |= 0x1;
 		break;
 	}
-
-	var->unusable = !var->present;
 }
 
 static int svm_get_cpl(struct kvm_vcpu *vcpu)
-- 
cgit v1.2.3


From 334b8ad7b182fc14d720acd7729afda3ab4c7e3a Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 3 May 2009 16:34:21 +0300
Subject: KVM: Fix NX support reporting

NX support is bit 20, not bit 1.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7c1ce5ac613..834a7bf25e4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1259,7 +1259,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) |
 		bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) |
 		bit(X86_FEATURE_SYSCALL) |
-		(bit(X86_FEATURE_NX) && is_efer_nx()) |
+		(is_efer_nx() ? bit(X86_FEATURE_NX) : 0) |
 #ifdef CONFIG_X86_64
 		bit(X86_FEATURE_LM) |
 #endif
-- 
cgit v1.2.3


From e286e86e6d2042d67d09244aa0e05ffef75c9d54 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 3 May 2009 18:50:55 +0300
Subject: KVM: Make EFER reads safe when EFER does not exist

Some processors don't have EFER; don't oops if userspace wants us to
read EFER when we check NX.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 834a7bf25e4..49079a46687 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1121,9 +1121,9 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 
 static int is_efer_nx(void)
 {
-	u64 efer;
+	unsigned long long efer = 0;
 
-	rdmsrl(MSR_EFER, efer);
+	rdmsrl_safe(MSR_EFER, &efer);
 	return efer & EFER_NX;
 }
 
-- 
cgit v1.2.3


From 917a0153621572e88aeb2d5df025ad2e81027287 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 6 May 2009 21:36:16 -0700
Subject: x86: mtrr: Fix high_width computation when phys-addr is >= 44bit

found one system where cpu address line is 44bits, mtrr printout
is not right:

 [    0.000000] MTRR variable ranges enabled:
 [    0.000000]   0 base 0   00000000 mask FF0 00000000 write-back
 [    0.000000]   1 base 10  00000000 mask FFF 80000000 write-back
 [    0.000000]   2 base 0   80000000 mask FFF 80000000 uncachable
 [    0.000000]   3 base 0   7F800000 mask FFF FF800000 uncachable

Li Zefan and Frederic pointed out the high_width could be -4 some how.

It turns out when phys_addr is 44bit, size_or_mask will be
ffffffff,00000000 so ffs(size_or_mask) will be 0.

Try to check low 32 bit, to get correct high_width.

Signed-off-by: Yinghai Lu <yinghai@kerne.org>
Also-analyzed-by: Frederic Weisbecker <fweisbec@gmail.com>
Also-analyzed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A026540.8060504@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/generic.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 0b776c09aff..d21d4fb161f 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -275,7 +275,11 @@ static void __init print_mtrr_state(void)
 	}
 	printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
 	       mtrr_state.enabled & 2 ? "en" : "dis");
-	high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4;
+	if (size_or_mask & 0xffffffffUL)
+		high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
+	else
+		high_width = ffs(size_or_mask>>32) + 32 - 1;
+	high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
 	for (i = 0; i < num_var_ranges; ++i) {
 		if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
 			printk(KERN_DEBUG "  %u base %0*X%05X000 mask %0*X%05X000 %s\n",
-- 
cgit v1.2.3


From 99f85a28a78e96d28907fe036e1671a218fee597 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 11 May 2009 14:21:10 +0300
Subject: KVM: SVM: Remove port 80 passthrough
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

KVM optimizes guest port 80 accesses by passthing them through to the host.
Some AMD machines die on port 80 writes, allowing the guest to hard-lock the
host.

Remove the port passthrough to avoid the problem.

Cc: stable@kernel.org
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Tested-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 9184e32778a..1f8510c51d6 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -411,7 +411,6 @@ static __init int svm_hardware_setup(void)
 
 	iopm_va = page_address(iopm_pages);
 	memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER));
-	clear_bit(0x80, iopm_va); /* allow direct access to PC debug port */
 	iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT;
 
 	if (boot_cpu_has(X86_FEATURE_NX))
-- 
cgit v1.2.3


From fd18de50b9e7965f93d231e7390436fb8900c0e6 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sun, 10 May 2009 23:57:41 +0100
Subject: intel-iommu: PAE memory corruption fix

PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE.

So it's not sufficient to ensure that you use phys_addr_t or uint64_t
everywhere you handle physical addresses -- you also have to avoid using
the construct 'addr & PAGE_MASK', because that will strip the high 32
bits of the address.

This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of
PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances
that don't matter -- where it's being used on the virtual bus addresses
we're dishing out, which are 32-bit anyway.

Since PHYSICAL_PAGE_MASK is not present on other architectures, we have
to define it (to PAGE_MASK) if it's not already defined.

Maybe it would be better just to fix PAGE_MASK for i386/PAE?

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pci/intel-iommu.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 001b328adf8..a563fbe559d 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -59,6 +59,10 @@
 #define DMA_32BIT_PFN		IOVA_PFN(DMA_BIT_MASK(32))
 #define DMA_64BIT_PFN		IOVA_PFN(DMA_BIT_MASK(64))
 
+#ifndef PHYSICAL_PAGE_MASK
+#define PHYSICAL_PAGE_MASK PAGE_MASK
+#endif
+
 /* global iommu list, set NULL for ignored DMAR units */
 static struct intel_iommu **g_iommus;
 
@@ -1216,7 +1220,7 @@ static void dmar_init_reserved_ranges(void)
 			if (!r->flags || !(r->flags & IORESOURCE_MEM))
 				continue;
 			addr = r->start;
-			addr &= PAGE_MASK;
+			addr &= PHYSICAL_PAGE_MASK;
 			size = r->end - addr;
 			size = PAGE_ALIGN(size);
 			iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
@@ -2173,7 +2177,8 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
 	 * is not a big problem
 	 */
 	ret = domain_page_mapping(domain, start_paddr,
-		((u64)paddr) & PAGE_MASK, size, prot);
+				  ((u64)paddr) & PHYSICAL_PAGE_MASK,
+				  size, prot);
 	if (ret)
 		goto error;
 
@@ -2463,8 +2468,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne
 		addr = page_to_phys(sg_page(sg)) + sg->offset;
 		size = aligned_size((u64)addr, sg->length);
 		ret = domain_page_mapping(domain, start_addr + offset,
-			((u64)addr) & PAGE_MASK,
-			size, prot);
+					  ((u64)addr) & PHYSICAL_PAGE_MASK,
+					  size, prot);
 		if (ret) {
 			/*  clear the page */
 			dma_pte_clear_range(domain, start_addr,
-- 
cgit v1.2.3


From f5208997087e6eb2096532b5a313eeb236535bdc Mon Sep 17 00:00:00 2001
From: Zoltan Karcagi <zkr@freemail.hu>
Date: Wed, 6 May 2009 16:30:21 +0200
Subject: HID: fix dropped device-specific quirks

Device-specific quirks are set up correctly in their respective vendor-specific
driver, then get overwritten in usbhid_parse().

This is only issue for device-specific NOGET quirks being set by driver for a
few devices out there.

Signed-off-by: Zoltan Karcagi <zkr@freemail.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 900ce18dd54..ac8049b5f1e 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -898,7 +898,7 @@ static int usbhid_parse(struct hid_device *hid)
 		goto err;
 	}
 
-	hid->quirks = quirks;
+	hid->quirks |= quirks;
 
 	return 0;
 err:
-- 
cgit v1.2.3


From b820aabf6cb987fd03d85b0b5f599685051e0426 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 6 May 2009 15:48:49 -0400
Subject: HID: add NOGET quirk for devices from CH Products

This patch (as1240) adds the NOGET quirk for three devices from CH
Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim
yoke.  Without these quirks, the devices haven't worked for many
kernel releases.  Sometimes replugging them after boot-up would get
them to work and sometimes they wouldn't work at all.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Sean Hildebrand <silverwraithii@gmail.com>
Reported-by: Sid Boyce <sboyce@blueyonder.co.uk>
Tested-by: Sean Hildebrand <silverwraithii@gmail.com>
Tested-by: Sid Boyce <sboyce@blueyonder.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-ids.h           | 5 +++++
 drivers/hid/usbhid/hid-quirks.c | 3 +++
 2 files changed, 8 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index aa1b995dd03..4d5ee2bbc62 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -113,6 +113,11 @@
 #define USB_VENDOR_ID_BERKSHIRE		0x0c98
 #define USB_DEVICE_ID_BERKSHIRE_PCWD	0x1140
 
+#define USB_VENDOR_ID_CH		0x068e
+#define USB_DEVICE_ID_CH_PRO_PEDALS	0x00f2
+#define USB_DEVICE_ID_CH_COMBATSTICK	0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE	0x00ff
+
 #define USB_VENDOR_ID_CHERRY		0x046a
 #define USB_DEVICE_ID_CHERRY_CYMOTION	0x0023
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 4391717d251..d8f7423f363 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -50,6 +50,9 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
-- 
cgit v1.2.3


From 3c598766a2bae1b208470e7cc934ac462561e3cb Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Mon, 11 May 2009 16:49:28 +0100
Subject: x86: fix percpu_{to,from}_op()

- the byte operand constraints were wrong for 32-bit
- the to-op's input operands weren't properly parenthesized

[ Impact: fix possible miscompilation or build failure ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/percpu.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index aee103b26d0..02ecb30982a 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -82,22 +82,22 @@ do {							\
 	case 1:						\
 		asm(op "b %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "qi" ((T__)(val)));		\
 		break;					\
 	case 2:						\
 		asm(op "w %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "ri" ((T__)(val)));		\
 		break;					\
 	case 4:						\
 		asm(op "l %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "ri" ((T__)val));			\
+		    : "ri" ((T__)(val)));		\
 		break;					\
 	case 8:						\
 		asm(op "q %1,"__percpu_arg(0)		\
 		    : "+m" (var)			\
-		    : "re" ((T__)val));			\
+		    : "re" ((T__)(val)));		\
 		break;					\
 	default: __bad_percpu_size();			\
 	}						\
@@ -109,7 +109,7 @@ do {							\
 	switch (sizeof(var)) {				\
 	case 1:						\
 		asm(op "b "__percpu_arg(1)",%0"		\
-		    : "=r" (ret__)			\
+		    : "=q" (ret__)			\
 		    : "m" (var));			\
 		break;					\
 	case 2:						\
-- 
cgit v1.2.3


From 83aca8f480fcd2d9748301a5d060cf947dc75b94 Mon Sep 17 00:00:00 2001
From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Date: Mon, 11 May 2009 23:24:47 +0900
Subject: nilfs2: check size of array structured data exchanged via ioctls

Although some ioctls of nilfs2 exchange data in the form of indirectly
referenced array, some of them lack size check on the array elements.

This inserts the missing checks and rejects requests if data of ioctl
does not have a valid format.

We usually don't have to check size of structures that we associated
with ioctl commands because the size is tested implicitly for
identifying ioctl command; the checks this patch adds are for the
cases where the implicit check is not applied.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
---
 fs/nilfs2/ioctl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 49489f68eab..50ff3f2cdf2 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -254,6 +254,9 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
+	if (argv.v_size != sizeof(struct nilfs_bdesc))
+		return -EINVAL;
+
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
 				    nilfs_ioctl_do_get_bdescs);
 	if (ret < 0)
@@ -599,6 +602,7 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
 
 static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
 				unsigned int cmd, void __user *argp,
+				size_t membsz,
 				ssize_t (*dofunc)(struct the_nilfs *,
 						  __u64 *, int,
 						  void *, size_t, size_t))
@@ -611,6 +615,9 @@ static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
 	if (copy_from_user(&argv, argp, sizeof(argv)))
 		return -EFAULT;
 
+	if (argv.v_size != membsz)
+		return -EINVAL;
+
 	ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
 	if (ret < 0)
 		return ret;
@@ -632,16 +639,19 @@ long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_CPINFO:
 		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    sizeof(struct nilfs_cpinfo),
 					    nilfs_ioctl_do_get_cpinfo);
 	case NILFS_IOCTL_GET_CPSTAT:
 		return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_SUINFO:
 		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    sizeof(struct nilfs_suinfo),
 					    nilfs_ioctl_do_get_suinfo);
 	case NILFS_IOCTL_GET_SUSTAT:
 		return nilfs_ioctl_get_sustat(inode, filp, cmd, argp);
 	case NILFS_IOCTL_GET_VINFO:
 		return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+					    sizeof(struct nilfs_vinfo),
 					    nilfs_ioctl_do_get_vinfo);
 	case NILFS_IOCTL_GET_BDESCS:
 		return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp);
-- 
cgit v1.2.3


From 72af2b363107df9cd67985ecb8495bbdff3c9857 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Date: Mon, 11 May 2009 09:58:19 -0700
Subject: ARM: OMAP: Fix printing of reserved memory for frambuffer

Print reserved memory only if it was actually reserved.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/fb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index ce6b4baeede..3746222bed1 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
 			config_invalid = 1;
 			return;
 		}
-		if (rg.paddr)
+		if (rg.paddr) {
 			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
-		reserved += rg.size;
+			reserved += rg.size;
+		}
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}
-- 
cgit v1.2.3


From 914dc18255e430ceabb10b57394e01814c69c5cd Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 11 May 2009 13:04:55 +0300
Subject: ASoC: soc-core: fix crash when removing not instantiated card

If the card was not instantiated in snd_soc_instantiate_card, calling
soc-remove will crash because some of codec, cpu_dai and card .remove
methods are called twice.
Fix this by returning from soc_remove immediately.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/soc-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 99712f652d0..1cd149b9ce6 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -954,6 +954,9 @@ static int soc_remove(struct platform_device *pdev)
 	struct snd_soc_platform *platform = card->platform;
 	struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
 
+	if (!card->instantiated)
+		return 0;
+
 	run_delayed_work(&card->delayed_work);
 
 	if (platform->remove)
-- 
cgit v1.2.3


From 1ffafeb556d50de8039e14f1cbbe58e9e4549915 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 11 May 2009 13:11:38 +0300
Subject: pxa2xx-ac97: fix reset gpio mode setting

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/arm/pxa2xx-ac97-lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index a2c12d105c9..6fdca97186e 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -65,7 +65,7 @@ static void set_resetgpio_mode(int resetgpio_action)
 		switch (resetgpio_action) {
 		case RESETGPIO_NORMAL_ALTFUNC:
 			if (reset_gpio == 113)
-				mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
+				mode = 113 | GPIO_ALT_FN_2_OUT;
 			if (reset_gpio == 95)
 				mode = 95 | GPIO_ALT_FN_1_OUT;
 			break;
-- 
cgit v1.2.3


From 842faa6c1a1d6faddf3377948e5cf214812c6c90 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sun, 10 May 2009 01:06:54 +0900
Subject: libata: fix attach error handling

New device attach path in ata_eh_revalidate_and_attach() is divided
into two separate loops because ATA requires IDENTIFY to be issued to
slave first while the user expects to see device probe messages from
the master device.  new_mask is used to track which devices are the
new ones between the first loop and the second.

This usually works well but if an error occurs during configuration
stage, ata_dev_revalidate_and_attach() returns with error code and
forgets new_mask.  On the retry run, dev->class is set and new_mask
for the device is clear, so the device just gets revalidated and thus
ends up skipping post-configuration procedure including scheduling of
SCSI_HOTPLUG for the device.  When this occurs, ATA part of probing
works fine but SCSI probing usually doesn't happen and makes the
device unreachable.

The behavior has been around for a very long time but it has been
uncovered with the recent addition of 1_5_GBPS horkage which uses
-EAGAIN return value from ata_dev_configure() to restart the probing
sequence after forcing cable speed.

This can be fixed by making sure dev->class is permanently set only
after all configurations are successfully complete.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tim Connors <tconnors+linuxkml@astro.swin.edu.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 01831312c36..eb8b94016c0 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 		} else if (dev->class == ATA_DEV_UNKNOWN &&
 			   ehc->tries[dev->devno] &&
 			   ata_class_enabled(ehc->classes[dev->devno])) {
+			/* Temporarily set dev->class, it will be
+			 * permanently set once all configurations are
+			 * complete.  This is necessary because new
+			 * device configuration is done in two
+			 * separate loops.
+			 */
 			dev->class = ehc->classes[dev->devno];
 
 			if (dev->class == ATA_DEV_PMP)
@@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			else
 				rc = ata_dev_read_id(dev, &dev->class,
 						     readid_flags, dev->id);
+
+			/* read_id might have changed class, store and reset */
+			ehc->classes[dev->devno] = dev->class;
+			dev->class = ATA_DEV_UNKNOWN;
+
 			switch (rc) {
 			case 0:
 				/* clear error info accumulated during probe */
@@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			case -ENOENT:
 				/* IDENTIFY was issued to non-existent
 				 * device.  No need to reset.  Just
-				 * thaw and kill the device.
+				 * thaw and ignore the device.
 				 */
 				ata_eh_thaw_port(ap);
-				dev->class = ATA_DEV_UNKNOWN;
 				break;
 			default:
-				dev->class = ATA_DEV_UNKNOWN;
 				goto err;
 			}
 		}
@@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 		    dev->class == ATA_DEV_PMP)
 			continue;
 
+		dev->class = ehc->classes[dev->devno];
+
 		ehc->i.flags |= ATA_EHI_PRINTINFO;
 		rc = ata_dev_configure(dev);
 		ehc->i.flags &= ~ATA_EHI_PRINTINFO;
-		if (rc)
+		if (rc) {
+			dev->class = ATA_DEV_UNKNOWN;
 			goto err;
+		}
 
 		spin_lock_irqsave(ap->lock, flags);
 		ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
-- 
cgit v1.2.3


From 29b7e43c310bdc20d240c7674d9073f6c1c12a3f Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Mon, 4 May 2009 20:58:50 +0200
Subject: sata_mv: use new sata phy register settings for new devices

Marvell's new SoC (65 nano) needs different settings for its SATA
PHY registers.

Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 67 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 870dcfd8235..23714aefb82 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -293,6 +293,10 @@ enum {
 	FISCFG_WAIT_DEV_ERR	= (1 << 8),	/* wait for host on DevErr */
 	FISCFG_SINGLE_SYNC	= (1 << 16),	/* SYNC on DMA activation */
 
+	PHY_MODE9_GEN2		= 0x398,
+	PHY_MODE9_GEN1		= 0x39c,
+	PHYCFG_OFS		= 0x3a0,	/* only in 65n devices */
+
 	MV5_PHY_MODE		= 0x74,
 	MV5_LTMODE		= 0x30,
 	MV5_PHY_CTL		= 0x0C,
@@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
 static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
 				      void __iomem *mmio);
 static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+				  void __iomem *mmio, unsigned int port);
 static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no);
@@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = {
 	.reset_bus		= mv_soc_reset_bus,
 };
 
+static const struct mv_hw_ops mv_soc_65n_ops = {
+	.phy_errata		= mv_soc_65n_phy_errata,
+	.enable_leds		= mv_soc_enable_leds,
+	.reset_hc		= mv_soc_reset_hc,
+	.reset_flash		= mv_soc_reset_flash,
+	.reset_bus		= mv_soc_reset_bus,
+};
+
 /*
  * Functions
  */
@@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
 	return;
 }
 
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+				  void __iomem *mmio, unsigned int port)
+{
+	void __iomem *port_mmio = mv_port_base(mmio, port);
+	u32	reg;
+
+	reg = readl(port_mmio + PHY_MODE3);
+	reg &= ~(0x3 << 27);	/* SELMUPF (bits 28:27) to 1 */
+	reg |= (0x1 << 27);
+	reg &= ~(0x3 << 29);	/* SELMUPI (bits 30:29) to 1 */
+	reg |= (0x1 << 29);
+	writel(reg, port_mmio + PHY_MODE3);
+
+	reg = readl(port_mmio + PHY_MODE4);
+	reg &= ~0x1;	/* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+	reg |= (0x1 << 16);
+	writel(reg, port_mmio + PHY_MODE4);
+
+	reg = readl(port_mmio + PHY_MODE9_GEN2);
+	reg &= ~0xf;	/* TXAMP[3:0] (bits 3:0) to 8 */
+	reg |= 0x8;
+	reg &= ~(0x1 << 14);	/* TXAMP[4] (bit 14) to 0 */
+	writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+	reg = readl(port_mmio + PHY_MODE9_GEN1);
+	reg &= ~0xf;	/* TXAMP[3:0] (bits 3:0) to 8 */
+	reg |= 0x8;
+	reg &= ~(0x1 << 14);	/* TXAMP[4] (bit 14) to 0 */
+	writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ *	soc_is_65 - check if the soc is 65 nano device
+ *
+ *	Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ *	register, this register should contain non-zero value and it exists only
+ *	in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+	void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+	if (readl(port0_mmio + PHYCFG_OFS))
+		return true;
+	return false;
+}
+
 static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
 {
 	u32 ifcfg = readl(port_mmio + SATA_IFCFG);
@@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 		}
 		break;
 	case chip_soc:
-		hpriv->ops = &mv_soc_ops;
+		if (soc_is_65n(hpriv))
+			hpriv->ops = &mv_soc_65n_ops;
+		else
+			hpriv->ops = &mv_soc_ops;
 		hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
 			MV_HP_ERRATA_60X1C0;
 		break;
@@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 	n_hc = mv_get_hc_count(host->ports[0]->flags);
 
 	for (port = 0; port < host->n_ports; port++)
-		hpriv->ops->read_preamp(hpriv, port, mmio);
+		if (hpriv->ops->read_preamp)
+			hpriv->ops->read_preamp(hpriv, port, mmio);
 
 	rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
 	if (rc)
-- 
cgit v1.2.3


From 6ad58b245a543461bd55d51b8303f555419687b2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 20 Apr 2009 22:31:25 +0200
Subject: pata_pdc202xx_old: fix UDMA33 handling

The original driver doesn't use 66 MHz clock for UDMA33.

[ The alternative solution would be to adjust UDMA33 timings
  for 66 MHz clock but I think that it is safer to stick with
  old & tested behavior for now. ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_pdc202xx_old.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 5fedb3d4032..2f3c9bed63d 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -2,7 +2,7 @@
  * pata_pdc202xx_old.c 	- Promise PDC202xx PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
  *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
- *			  (C) 2007 Bartlomiej Zolnierkiewicz
+ *			  (C) 2007,2009 Bartlomiej Zolnierkiewicz
  *
  * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
  *
@@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
 	u32 len;
 
 	/* Check we keep host level locking here */
-	if (adev->dma_mode >= XFER_UDMA_2)
+	if (adev->dma_mode > XFER_UDMA_2)
 		iowrite8(ioread8(clock) | sel66, clock);
 	else
 		iowrite8(ioread8(clock) & ~sel66, clock);
@@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
 		iowrite8(ioread8(clock) & ~sel66, clock);
 	}
 	/* Flip back to 33Mhz for PIO */
-	if (adev->dma_mode >= XFER_UDMA_2)
+	if (adev->dma_mode > XFER_UDMA_2)
 		iowrite8(ioread8(clock) & ~sel66, clock);
 	ata_bmdma_stop(qc);
 	pdc202xx_set_piomode(ap, adev);
-- 
cgit v1.2.3


From 6f9c1ea2c1cea2de3e5670a7cd98d9f7316b0952 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 23 Apr 2009 09:55:28 +0900
Subject: libata: clear ering on resume

Error timestamps are in jiffies which doesn't run while suspended and
PHY events during resume isn't too uncommon.  When the two are
combined, it can lead to unnecessary speed downs if the machine is
suspended and resumed repeatedly.  Clear error history on resume.

This was reported and verified in bnc#486803 by Vladimir Botka.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vladimir Botka <vbotka@novell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index eb8b94016c0..94919ad03df 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3507,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
  */
 static void ata_eh_handle_port_resume(struct ata_port *ap)
 {
+	struct ata_link *link;
+	struct ata_device *dev;
 	unsigned long flags;
 	int rc = 0;
 
@@ -3521,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 
 	WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
 
+	/*
+	 * Error timestamps are in jiffies which doesn't run while
+	 * suspended and PHY events during resume isn't too uncommon.
+	 * When the two are combined, it can lead to unnecessary speed
+	 * downs if the machine is suspended and resumed repeatedly.
+	 * Clear error history.
+	 */
+	ata_for_each_link(link, ap, HOST_FIRST)
+		ata_for_each_dev(dev, link, ALL)
+			ata_ering_clear(&dev->ering);
+
 	ata_acpi_set_state(ap, PMSG_ON);
 
 	if (ap->ops->port_resume)
-- 
cgit v1.2.3


From f0d0613dedda4891ecb1977e4d02bf9be93882a3 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sun, 26 Apr 2009 16:33:34 +0200
Subject: libata: fix suspend/resume for ATA SEMB devices

79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices
reporting 3c/c3 signature which belongs to SEMB devices now. However,
suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails
with the following:

hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
sd 1:0:0:0: [sda] Starting disk
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: class mismatch 1 != 7
ata2.00: revalidation failed (errno=-19)
ata2: limiting SATA link speed to 1.5 Gbps
ata4.00: configured for UDMA/133
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: class mismatch 1 != 7
ata2.00: revalidation failed (errno=-19)
ata2.00: disabled
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: [sda] START_STOP FAILED
sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
PM: Device 1:0:0:0 failed to thaw: error 65536
sd 3:0:0:0: [sdb] Starting disk

due to a class mismatch in ata_dev_revalidate(). Fix it by adding the
ATA_DEV_SEMB device class to the check.

CC: Tejun Heo <htejun@gmail.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 17c5d48a75d..c9242301cfa 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 
 	/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
 	if (ata_class_enabled(new_class) &&
-	    new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+	    new_class != ATA_DEV_ATA &&
+	    new_class != ATA_DEV_ATAPI &&
+	    new_class != ATA_DEV_SEMB) {
 		ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
 			       dev->class, new_class);
 		rc = -ENODEV;
-- 
cgit v1.2.3


From ea7a5ed58fa40c76ff87c0dd960f1d785009dd6d Mon Sep 17 00:00:00 2001
From: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Date: Mon, 4 May 2009 15:48:45 +0200
Subject: Avoid world-writable sysfs files in libata driver.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2733b0c90b7..68d9132d8f6 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
 		return ap->ops->em_show(ap, buf);
 	return -EINVAL;
 }
-DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
 		ata_scsi_em_message_show, ata_scsi_em_message_store);
 EXPORT_SYMBOL_GPL(dev_attr_em_message);
 
@@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
 	}
 	return -EINVAL;
 }
-DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
 			ata_scsi_activity_store);
 EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
 
-- 
cgit v1.2.3


From c611bed780a51222ece8eaf303c779ef82d9d253 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Wed, 6 May 2009 17:08:44 +0100
Subject: ata_piix: ICH7 does not support correct MWDMA timings

See Errata documentation. The recommended workaround is to use PIO4 instead
which will we automatically do by flagging this mode not available.

Signed-off-by: Alan Cox <alan.cox@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ata_piix.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 942d14ac879..2b5700a832a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -72,6 +72,7 @@
  *	ICH2    spec c #20	- IDE PRD must not cross a 64K boundary
  *				  and must be dword aligned
  *	ICH2    spec c #24	- UDMA mode 4,5 t85/86 should be 6ns not 3.3
+ *	ICH7	errata #16	- MWDMA1 timings are incorrect
  *
  * Should have been BIOS fixed:
  *	450NX:	errata #19	- DMA hangs on old 450NX
@@ -94,7 +95,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"2.12"
+#define DRV_VERSION	"2.13"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
@@ -136,6 +137,7 @@ enum piix_controller_ids {
 	ich_pata_33,		/* ICH up to UDMA 33 only */
 	ich_pata_66,		/* ICH up to 66 Mhz */
 	ich_pata_100,		/* ICH up to UDMA 100 */
+	ich_pata_100_nomwdma1,	/* ICH up to UDMA 100 but with no MWDMA1*/
 	ich5_sata,
 	ich6_sata,
 	ich6m_sata,
@@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* ICH6 (and 6) (i915) UDMA 100 */
 	{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* ICH7/7-R (i945, i975) UDMA 100*/
-	{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
-	{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+	{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
+	{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
 	/* ICH8 Mobile PATA Controller */
 	{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 
@@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &ich_pata_ops,
 	},
 
+	[ich_pata_100_nomwdma1] =
+	{
+		.flags		= PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2_ONLY,
+		.udma_mask	= ATA_UDMA5,
+		.port_ops	= &ich_pata_ops,
+	},
+
 	[ich5_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
-- 
cgit v1.2.3


From 124a6eece386226191ec79e279a5471bd2614f81 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Wed, 6 May 2009 17:09:41 +0100
Subject: ata_piix: The Sony TZ90 needs the cable type hardcoding

The Sony TZ90 needs the cable type hardcoding. See bug #12734

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ata_piix.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 2b5700a832a..d51a17c0f59 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -605,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
 	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
 	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
+	{ 0x27df, 0x104d, 0x900e },	/* ICH7 on Sony TZ-90 */
 	/* end marker */
 	{ 0, }
 };
-- 
cgit v1.2.3


From aedec9226809ae9d1972f8f8079fc70206ee7a88 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 4 May 2009 11:18:57 -0400
Subject: airo: airo_get_encode{,ext} potential buffer overflow

Feeding the return code of get_wep_key directly to the length parameter
of memcpy is a bad idea since it could be -1...

Reported-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/airo.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index c36d3a3d655..d7347573912 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -6501,7 +6501,10 @@ static int airo_get_encode(struct net_device *dev,
 
 	/* Copy the key to the user buffer */
 	dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf));
-	memcpy(extra, buf, dwrq->length);
+	if (dwrq->length != -1)
+		memcpy(extra, buf, dwrq->length);
+	else
+		dwrq->length = 0;
 
 	return 0;
 }
@@ -6659,7 +6662,10 @@ static int airo_get_encodeext(struct net_device *dev,
 	
 	/* Copy the key to the user buffer */
 	ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
-	memcpy(extra, buf, ext->key_len);
+	if (ext->key_len != -1)
+		memcpy(extra, buf, ext->key_len);
+	else
+		ext->key_len = 0;
 
 	return 0;
 }
-- 
cgit v1.2.3


From 621ad7c96aa138cfeab53cd4debc5a4e08b2189b Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 5 May 2009 15:18:26 -0400
Subject: mac80211: avoid NULL ptr deref when finding max_rates in PID and
 minstrel

"There is another problem with this piece of code. The sband will be NULL
after second iteration on single band device and cause null pointer
dereference. Everything is working with dual band card. Sorry, but i
don't know how to explain this clearly in English. I have looked on the
second patch for pid algorithm and found similar bug."

Reported-by: Karol Szuster <qflon@o2.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/rc80211_minstrel.c | 2 +-
 net/mac80211/rc80211_pid_algo.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 70df3dcc3cf..d9233ec5061 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -477,7 +477,7 @@ minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
 
 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
 		sband = hw->wiphy->bands[i];
-		if (sband->n_bitrates > max_rates)
+		if (sband && sband->n_bitrates > max_rates)
 			max_rates = sband->n_bitrates;
 	}
 
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 01d59a8e334..8bef9a1262f 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -378,7 +378,7 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
 
 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
 		sband = hw->wiphy->bands[i];
-		if (sband->n_bitrates > max_rates)
+		if (sband && sband->n_bitrates > max_rates)
 			max_rates = sband->n_bitrates;
 	}
 
-- 
cgit v1.2.3


From 9be6f0d40d9191e6fe7e45551c7d1c1614472b53 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Wed, 6 May 2009 13:57:27 -0400
Subject: rtl8187: use DMA-aware buffers with usb_control_msg

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187.h         | 57 +++++++++++++++++++-------
 drivers/net/wireless/rtl818x/rtl8187_dev.c     | 13 +++++-
 drivers/net/wireless/rtl818x/rtl8187_rtl8225.c |  8 +++-
 3 files changed, 62 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index 9718f61809c..edeff82a4d0 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -120,6 +120,12 @@ struct rtl8187_priv {
 		__le64 buf;
 		struct sk_buff_head queue;
 	} b_tx_status; /* This queue is used by both -b and non-b devices */
+	struct mutex io_mutex;
+	union {
+		u8 bits8;
+		__le16 bits16;
+		__le32 bits32;
+	} *io_dmabuf;
 };
 
 void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
@@ -129,10 +135,14 @@ static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
 {
 	u8 val;
 
+	mutex_lock(&priv->io_mutex);
 	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
 			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+	val = priv->io_dmabuf->bits8;
+	mutex_unlock(&priv->io_mutex);
 
 	return val;
 }
@@ -147,10 +157,14 @@ static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv,
 {
 	__le16 val;
 
+	mutex_lock(&priv->io_mutex);
 	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
 			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+	val = priv->io_dmabuf->bits16;
+	mutex_unlock(&priv->io_mutex);
 
 	return le16_to_cpu(val);
 }
@@ -165,10 +179,14 @@ static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv,
 {
 	__le32 val;
 
+	mutex_lock(&priv->io_mutex);
 	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
 			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+	val = priv->io_dmabuf->bits32;
+	mutex_unlock(&priv->io_mutex);
 
 	return le32_to_cpu(val);
 }
@@ -181,10 +199,15 @@ static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
 static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
 					u8 *addr, u8 val, u8 idx)
 {
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits8 = val;
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03, &val,
-			sizeof(val), HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 }
 
 static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
@@ -195,12 +218,15 @@ static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
 static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
 					 __le16 *addr, u16 val, u8 idx)
 {
-	__le16 buf = cpu_to_le16(val);
+	mutex_lock(&priv->io_mutex);
 
+	priv->io_dmabuf->bits16 = cpu_to_le16(val);
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
-			HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 }
 
 static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
@@ -212,12 +238,15 @@ static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
 static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
 					 __le32 *addr, u32 val, u8 idx)
 {
-	__le32 buf = cpu_to_le32(val);
+	mutex_lock(&priv->io_mutex);
 
+	priv->io_dmabuf->bits32 = cpu_to_le32(val);
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			(unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
-			HZ / 2);
+			(unsigned long)addr, idx & 0x03,
+			&priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 }
 
 static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr,
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index fd81884b9c7..bac6cfba6ab 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1329,6 +1329,14 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	priv = dev->priv;
 	priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
 
+	/* allocate "DMA aware" buffer for register accesses */
+	priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
+	if (!priv->io_dmabuf) {
+		err = -ENOMEM;
+		goto err_free_dev;
+	}
+	mutex_init(&priv->io_mutex);
+
 	SET_IEEE80211_DEV(dev, &intf->dev);
 	usb_set_intfdata(intf, dev);
 	priv->udev = udev;
@@ -1495,7 +1503,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	err = ieee80211_register_hw(dev);
 	if (err) {
 		printk(KERN_ERR "rtl8187: Cannot register device\n");
-		goto err_free_dev;
+		goto err_free_dmabuf;
 	}
 	mutex_init(&priv->conf_mutex);
 	skb_queue_head_init(&priv->b_tx_status.queue);
@@ -1506,6 +1514,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
 	return 0;
 
+ err_free_dmabuf:
+	kfree(priv->io_dmabuf);
  err_free_dev:
 	ieee80211_free_hw(dev);
 	usb_set_intfdata(intf, NULL);
@@ -1526,6 +1536,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
 	priv = dev->priv;
 	usb_reset_device(priv->udev);
 	usb_put_dev(interface_to_usbdev(intf));
+	kfree(priv->io_dmabuf);
 	ieee80211_free_hw(dev);
 }
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
index 78df281b297..a09819386a1 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
@@ -88,9 +88,15 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data)
 	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
 	udelay(10);
 
+	mutex_lock(&priv->io_mutex);
+
+	priv->io_dmabuf->bits16 = data;
 	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
 			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
-			addr, 0x8225, &data, sizeof(data), HZ / 2);
+			addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
+			HZ / 2);
+
+	mutex_unlock(&priv->io_mutex);
 
 	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
 	udelay(10);
-- 
cgit v1.2.3


From 209d889bab3d0812ee9cda4f6bbeb1af8bede9d4 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Thu, 7 May 2009 08:09:08 -0400
Subject: ath5k: update channel in sw state after stopping RX and TX

This fixes a non-theoretical race condition when transmitting and
receiving frames during a scan.  If the channel or operating band
changes while processing status descriptors in the tasklets, ath5k
will incorrectly use the new channel and band when reporting the
rates, even if the frame was actually sent on a previous channel.

Typically this will manifest as a beacon found on an incorrect
frequency and/or a warning in the driver while scanning:

[ 4773.891944] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0
[ 4785.461125] ------------[ cut here ]------------
[ 4785.461135] WARNING: at drivers/net/wireless/ath/ath5k/base.c:1141 ath5k_tasklet_rx+0x2ff/0x577 [ath5k]()
[ 4785.461143] Hardware name: MacBook1,1
[ 4785.461148] invalid hw_rix: 1b
[ 4785.461152] Modules linked in: fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod arc4 ecb snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event ath5k snd_seq hid_apple usbhid snd_seq_device mac80211 appletouch snd_pcm_oss sky2 ohci1394 snd_mixer_oss ath ieee1394 snd_pcm bitrev snd_timer cfg80211 crc32 snd snd_page_alloc button processor ac ehci_hcd joydev uhci_hcd sg battery thermal sr_mod cdrom applesmc evdev input_polldev unix [last unloaded: microcode]
[ 4785.461296] Pid: 0, comm: swapper Tainted: G        W  2.6.30-rc3-wl #112
[ 4785.461302] Call Trace:
[ 4785.461316]  [<c012590f>] warn_slowpath+0x76/0xa5
[ 4785.461331]  [<c0219839>] ? debug_dma_unmap_page+0x5a/0x62
[ 4785.461357]  [<f9982f88>] ath5k_tasklet_rx+0x2ff/0x577 [ath5k]
[ 4785.461371]  [<c01446f7>] ? trace_hardirqs_off+0xb/0xd
[ 4785.461381]  [<c0129928>] ? __tasklet_schedule+0x6e/0x7c
[ 4785.461392]  [<c0129b02>] tasklet_action+0x92/0xe5
[ 4785.461402]  [<c0129f91>] __do_softirq+0xb1/0x182
[ 4785.461411]  [<c012a092>] do_softirq+0x30/0x48
[ 4785.461428]  [<c012a20a>] irq_exit+0x3d/0x74
[ 4785.461435]  [<c035a0de>] do_IRQ+0x76/0x8c
[ 4785.461440]  [<c010312e>] common_interrupt+0x2e/0x34
[ 4785.461445]  [<c014007b>] ? timer_list_show+0x1ab/0x939
[ 4785.461457]  [<f85fd25c>] ? acpi_idle_enter_bm+0x27c/0x2b9 [processor]
[ 4785.461463]  [<c02d1ed6>] cpuidle_idle_call+0x6a/0x9c
[ 4785.461468]  [<c0101cc8>] cpu_idle+0x53/0x87
[ 4785.461473]  [<c0346584>] rest_init+0x6c/0x6e
[ 4785.461479]  [<c04df74d>] start_kernel+0x286/0x28b
[ 4785.461484]  [<c04df037>] __init_begin+0x37/0x3c
[ 4785.461487] ---[ end trace aaf8496ba3679dfb ]---

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/base.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index a08bc8a4fb6..32df27a9c7a 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -214,7 +214,7 @@ static struct pci_driver ath5k_pci_driver = {
  * Prototypes - MAC 802.11 stack related functions
  */
 static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
 static int ath5k_reset_wake(struct ath5k_softc *sc);
 static int ath5k_start(struct ieee80211_hw *hw);
 static void ath5k_stop(struct ieee80211_hw *hw);
@@ -1038,16 +1038,13 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 	if (chan->center_freq != sc->curchan->center_freq ||
 		chan->hw_value != sc->curchan->hw_value) {
 
-		sc->curchan = chan;
-		sc->curband = &sc->sbands[chan->band];
-
 		/*
 		 * To switch channels clear any pending DMA operations;
 		 * wait long enough for the RX fifo to drain, reset the
 		 * hardware at the new frequency, and then re-enable
 		 * the relevant bits of the h/w.
 		 */
-		return ath5k_reset(sc, true, true);
+		return ath5k_reset(sc, chan);
 	}
 
 	return 0;
@@ -2314,7 +2311,7 @@ ath5k_init(struct ath5k_softc *sc)
 	sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
 		AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
 		AR5K_INT_FATAL | AR5K_INT_GLOBAL;
-	ret = ath5k_reset(sc, false, false);
+	ret = ath5k_reset(sc, NULL);
 	if (ret)
 		goto done;
 
@@ -2599,18 +2596,25 @@ drop_packet:
 	return NETDEV_TX_OK;
 }
 
+/*
+ * Reset the hardware.  If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ */
 static int
-ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 {
 	struct ath5k_hw *ah = sc->ah;
 	int ret;
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
-	if (stop) {
+	if (chan) {
 		ath5k_hw_set_imr(ah, 0);
 		ath5k_txq_cleanup(sc);
 		ath5k_rx_stop(sc);
+
+		sc->curchan = chan;
+		sc->curband = &sc->sbands[chan->band];
 	}
 	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
 	if (ret) {
@@ -2648,7 +2652,7 @@ ath5k_reset_wake(struct ath5k_softc *sc)
 {
 	int ret;
 
-	ret = ath5k_reset(sc, true, true);
+	ret = ath5k_reset(sc, sc->curchan);
 	if (!ret)
 		ieee80211_wake_queues(sc->hw);
 
-- 
cgit v1.2.3


From 542cc7937e6af73cb2edc455a0e456d22e254abb Mon Sep 17 00:00:00 2001
From: Jay Sternberg <jay.e.sternberg@linux.intel.com>
Date: Fri, 8 May 2009 13:44:46 -0700
Subject: iwlwifi: fix device id registration for 6000 series 2x2 devices

Add device ids for 2x2 devices. Also fix antenna usage because these devices use
antennas A and B, not B and C.

Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-6000.c | 8 ++++----
 drivers/net/wireless/iwlwifi/iwl-agn.c  | 2 ++
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index edfa5e149f7..bd438d8acf5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -101,8 +101,8 @@ struct iwl_cfg iwl6000_2agn_cfg = {
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
-	.valid_tx_ant = ANT_BC,
-	.valid_rx_ant = ANT_BC,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
 	.need_pll_cfg = false,
 };
 
@@ -117,8 +117,8 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
 	.mod_params = &iwl50_mod_params,
-	.valid_tx_ant = ANT_BC,
-	.valid_rx_ant = ANT_BC,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
 	.need_pll_cfg = false,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 1ef4192207a..3bb28db4a40 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3636,7 +3636,9 @@ static struct pci_device_id iwl_hw_card_ids[] = {
 	{IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)},
 	{IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)},
 	{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)},
 	{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
-- 
cgit v1.2.3


From 2b79bc4f7ebbd5af3c8b867968f9f15602d5f802 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Mon, 11 May 2009 14:25:34 -0400
Subject: dup2: Fix return value with oldfd == newfd and invalid fd

The return value of dup2 when oldfd == newfd and the fd isn't valid is
not getting properly sign extended.  We end up with 4294967287 instead
of -EBADF.

I've reproduced this on SLE11 (2.6.27.21), openSUSE Factory
(2.6.29-rc5), and Ubuntu 9.04 (2.6.28).

This patch uses a signed int for the error value so it is properly
extended.

Commit 6c5d0512a091480c9f981162227fdb1c9d70e555 introduced this
regression.

Reported-by: Jiri Dluhos <jdluhos@novell.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fcntl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index cc8e4de2fee..1ad703150de 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -117,11 +117,13 @@ SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd)
 {
 	if (unlikely(newfd == oldfd)) { /* corner case */
 		struct files_struct *files = current->files;
+		int retval = oldfd;
+
 		rcu_read_lock();
 		if (!fcheck_files(files, oldfd))
-			oldfd = -EBADF;
+			retval = -EBADF;
 		rcu_read_unlock();
-		return oldfd;
+		return retval;
 	}
 	return sys_dup3(oldfd, newfd, 0);
 }
-- 
cgit v1.2.3


From 8daed1e549b55827758b3af7b8132a73fc51526f Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@citi.umich.edu>
Date: Mon, 11 May 2009 16:10:19 -0400
Subject: nfsd: silence lockdep warning

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 fs/nfsd/nfs4recover.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index 5275097a756..b5348405046 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -229,7 +229,7 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f)
 		goto out;
 	status = vfs_readdir(filp, nfsd4_build_namelist, &names);
 	fput(filp);
-	mutex_lock(&dir->d_inode->i_mutex);
+	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
 	while (!list_empty(&names)) {
 		entry = list_entry(names.next, struct name_list, list);
 
@@ -264,7 +264,7 @@ nfsd4_unlink_clid_dir(char *name, int namlen)
 
 	dprintk("NFSD: nfsd4_unlink_clid_dir. name %.*s\n", namlen, name);
 
-	mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
+	mutex_lock_nested(&rec_dir.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
 	dentry = lookup_one_len(name, rec_dir.dentry, namlen);
 	if (IS_ERR(dentry)) {
 		status = PTR_ERR(dentry);
-- 
cgit v1.2.3


From 9166d0f620d5dd4a128711bdeedb3e0f534d9d49 Mon Sep 17 00:00:00 2001
From: Adrian Batzill <agib@gmx.de>
Date: Mon, 11 May 2009 15:22:16 -0700
Subject: Input: atkbd - add force release keys quirk for Amilo Xi 3650

Signed-off-by: Adrian Batzill <agib@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 444dec07e5d..df3f8aa6811 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -894,6 +894,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
 	0xb0, 0xae, -1U
 };
 
+/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+	0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
+
 /*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
@@ -1560,6 +1567,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_forced_release,
 		.driver_data = atkbd_amilo_pa1510_forced_release_keys,
 	},
+	{
+		.ident = "Fujitsu Amilo Xi 3650",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_amilo_xi3650_forced_release_keys,
+	},
 	{ }
 };
 
-- 
cgit v1.2.3


From 705a76d2d22a2824f45f07d023a380293554e989 Mon Sep 17 00:00:00 2001
From: Thierry Reding <thierry.reding@avionic-design.de>
Date: Mon, 11 May 2009 08:36:39 -0700
Subject: Input: tsc2007 - fix locking in hrtimer handler

Now that hrtimers are always running in hard irq context we can't
unconditionally enable interrupts at the end of the timer function.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/tsc2007.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 536668fbda2..948e167557f 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -200,8 +200,9 @@ static int tsc2007_read_values(struct tsc2007 *tsc)
 static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
 {
 	struct tsc2007 *ts = container_of(handle, struct tsc2007, timer);
+	unsigned long flags;
 
-	spin_lock_irq(&ts->lock);
+	spin_lock_irqsave(&ts->lock, flags);
 
 	if (unlikely(!ts->get_pendown_state() && ts->pendown)) {
 		struct input_dev *input = ts->input;
@@ -222,7 +223,7 @@ static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
 		tsc2007_send_event(ts);
 	}
 
-	spin_unlock_irq(&ts->lock);
+	spin_unlock_irqrestore(&ts->lock, flags);
 
 	return HRTIMER_NORESTART;
 }
-- 
cgit v1.2.3


From 7b6c6c77732ca1d2498eda7eabb64f9648896e96 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <mhiramat@redhat.com>
Date: Mon, 11 May 2009 17:03:00 -0400
Subject: x86, 32-bit: fix kernel_trap_sp()

Use &regs->sp instead of regs for getting the top of stack in kernel mode.
(on x86-64, regs->sp always points the top of stack)

[ Impact: Oprofile decodes only stack for backtracing on i386 ]

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
[ v2: rename the API to kernel_stack_pointer(), move variable inside ]
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: systemtap@sources.redhat.com
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jan Blunck <jblunck@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
LKML-Reference: <20090511210300.17332.67549.stgit@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/ptrace.h | 7 ++++---
 arch/x86/oprofile/backtrace.c | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index e304b66abee..624f133943e 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -187,14 +187,15 @@ static inline int v8086_mode(struct pt_regs *regs)
 
 /*
  * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps.  So regs will be the current sp.
+ * when it traps.  The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
  *
  * This is valid only for kernel mode traps.
  */
-static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 {
 #ifdef CONFIG_X86_32
-	return (unsigned long)regs;
+	return (unsigned long)(&regs->sp);
 #else
 	return regs->sp;
 #endif
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index 04df67f8a7b..044897be021 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -76,9 +76,9 @@ void
 x86_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	struct frame_head *head = (struct frame_head *)frame_pointer(regs);
-	unsigned long stack = kernel_trap_sp(regs);
 
 	if (!user_mode_vm(regs)) {
+		unsigned long stack = kernel_stack_pointer(regs);
 		if (depth)
 			dump_trace(NULL, regs, (unsigned long *)stack, 0,
 				   &backtrace_ops, &depth);
-- 
cgit v1.2.3


From 1904b03430ade1cd621bb8b6ca8e38819a2f9267 Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Thu, 9 Apr 2009 11:59:52 +0200
Subject: i2c-mpc: bug fix for MPC52xx clock setting and printout

The clock setting did not work for the MPC52xx due to a stupid bug.
Furthermore, the dev info output "clock=0" for old device trees was
misleading. This patch fixes both issues.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-mpc.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 4af5c09f0e8..dd778d7ae04 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -164,7 +164,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	return 0;
 }
 
-#ifdef CONFIG_PPC_52xx
+#ifdef CONFIG_PPC_MPC52xx
 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 	{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
 	{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
@@ -188,7 +188,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 
 int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
 {
-	const struct mpc52xx_i2c_divider *div = NULL;
+	const struct mpc_i2c_divider *div = NULL;
 	unsigned int pvr = mfspr(SPRN_PVR);
 	u32 divider;
 	int i;
@@ -203,7 +203,7 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
 	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
 	 * is equal to or lower than the requested speed.
 	 */
-	for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) {
+	for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
 		div = &mpc_i2c_dividers_52xx[i];
 		/* Old MPC5200 rev A CPUs do not support the high bits */
 		if (div->fdr & 0xc0 && pvr == 0x80822011)
@@ -219,20 +219,23 @@ static void mpc_i2c_setclock_52xx(struct device_node *node,
 				  struct mpc_i2c *i2c,
 				  u32 clock, u32 prescaler)
 {
-	int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
+	int ret, fdr;
+
+	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+	fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
-	if (fdr < 0)
-		fdr = 0x3f; /* backward compatibility */
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
-	dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+
+	if (ret >= 0)
+		dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
 }
-#else /* !CONFIG_PPC_52xx */
+#else /* !CONFIG_PPC_MPC52xx */
 static void mpc_i2c_setclock_52xx(struct device_node *node,
 				  struct mpc_i2c *i2c,
 				  u32 clock, u32 prescaler)
 {
 }
-#endif /* CONFIG_PPC_52xx*/
+#endif /* CONFIG_PPC_MPC52xx*/
 
 #ifdef CONFIG_FSL_SOC
 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
@@ -321,14 +324,17 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node,
 				  struct mpc_i2c *i2c,
 				  u32 clock, u32 prescaler)
 {
-	int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+	int ret, fdr;
+
+	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+	fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
-	if (fdr < 0)
-		fdr = 0x1031; /* backward compatibility */
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
 	writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
-	dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
-		 clock, fdr >> 8, fdr & 0xff);
+
+	if (ret >= 0)
+		dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+			 clock, fdr >> 8, fdr & 0xff);
 }
 
 #else /* !CONFIG_FSL_SOC */
-- 
cgit v1.2.3


From 89bc5d4a915dc6675961f797de91748bda87efcc Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 9 Apr 2009 17:03:24 +0100
Subject: i2c: Enable i2c-s3c2410 for S3C64XX too

This controller is also present on the S3C64xx series processors so
enable the driver in Kconfig for those platforms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a48c8aee021..f1c6ca7e285 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -467,7 +467,7 @@ config I2C_PXA_SLAVE
 
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
 	help
 	  Say Y here to include support for I2C controller in the
 	  Samsung S3C2410 based System-on-Chip devices.
-- 
cgit v1.2.3


From 36521c271e5f93b249329ee7f321d27825970e31 Mon Sep 17 00:00:00 2001
From: Mark Ware <mware@elphinstone.net>
Date: Tue, 21 Apr 2009 22:49:02 +1000
Subject: i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL

Recent DMA changes result in a BUG() when NULL is passed to
dma_alloc_coherent in place of a device.

Signed-off-by: Mark Ware <mware@elphinstone.net>
[ben-linux@fluff.org: fix patch moves]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-cpm.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3fcf78e906d..b5db8b88361 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -531,16 +531,16 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 	rbdf = cpm->rbase;
 
 	for (i = 0; i < CPM_MAXBD; i++) {
-		cpm->rxbuf[i] = dma_alloc_coherent(
-			NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+		cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev,
+						   CPM_MAX_READ + 1,
+						   &cpm->rxdma[i], GFP_KERNEL);
 		if (!cpm->rxbuf[i]) {
 			ret = -ENOMEM;
 			goto out_muram;
 		}
 		out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
 
-		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
-			NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
 		if (!cpm->txbuf[i]) {
 			ret = -ENOMEM;
 			goto out_muram;
@@ -585,10 +585,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 out_muram:
 	for (i = 0; i < CPM_MAXBD; i++) {
 		if (cpm->rxbuf[i])
-			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 				cpm->rxbuf[i], cpm->rxdma[i]);
 		if (cpm->txbuf[i])
-			dma_free_coherent(NULL, CPM_MAX_READ + 1,
+			dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 				cpm->txbuf[i], cpm->txdma[i]);
 	}
 	cpm_muram_free(cpm->dp_addr);
@@ -619,9 +619,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
 
 	/* Free all memory */
 	for (i = 0; i < CPM_MAXBD; i++) {
-		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 			cpm->rxbuf[i], cpm->rxdma[i]);
-		dma_free_coherent(NULL, CPM_MAX_READ + 1,
+		dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
 			cpm->txbuf[i], cpm->txdma[i]);
 	}
 
-- 
cgit v1.2.3


From 8d181018532dd709ec1f789e374cda92d7b01ce1 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Fri, 8 May 2009 07:13:33 -0600
Subject: PCI MSI: Fix MSI-X with NIU cards

The NIU device refuses to allow accesses to MSI-X registers before MSI-X
is enabled.  This patch fixes the problem by moving the read of the mask
register to after MSI-X is enabled.

Reported-by: David S. Miller <davem@davemloft.net>
Tested-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/msi.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 6f2e6295e77..362773247fb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -455,8 +455,6 @@ static int msix_capability_init(struct pci_dev *dev,
 		entry->msi_attrib.default_irq = dev->irq;
 		entry->msi_attrib.pos = pos;
 		entry->mask_base = base;
-		entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
-					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
 		msix_mask_irq(entry, 1);
 
 		list_add_tail(&entry->list, &dev->msi_list);
@@ -493,6 +491,12 @@ static int msix_capability_init(struct pci_dev *dev,
 	msix_set_enable(dev, 1);
 	dev->msix_enabled = 1;
 
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		int vector = entry->msi_attrib.entry_nr;
+		entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
+					PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 35e71f90687fd904b43e3427673827ac3e77b4d1 Mon Sep 17 00:00:00 2001
From: Chris Zankel <chris@zankel.net>
Date: Thu, 16 Apr 2009 00:25:39 -0700
Subject: xtensa: Fix architecture specific Kconfig

Move a misplace endmenu marker to enable platform options and
disable PCI and automatic calibrating for the XT2K board. The
on-board PCI bridge is somewhat broken, anyway, and the
calibrating relies on some whacky usage of the serial port.

Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/Kconfig | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index fa6dc4dd3b1..30d21a9e2ef 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -137,6 +137,8 @@ config PCI
 
 source "drivers/pci/Kconfig"
 
+endmenu
+
 menu "Platform options"
 
 choice
@@ -153,8 +155,6 @@ config XTENSA_PLATFORM_ISS
 
 config XTENSA_PLATFORM_XT2000
 	bool "XT2000"
-	select XTENSA_CALIBRATE_CCOUNT
-	select PCI
 	help
 	  XT2000 is the name of Tensilica's feature-rich emulation platform.
 	  This hardware is capable of running a full Linux distribution.
@@ -192,8 +192,6 @@ config CMDLINE
 
 source "mm/Kconfig"
 
-endmenu
-
 config HOTPLUG
 	bool "Support for hot-pluggable devices"
 	help
-- 
cgit v1.2.3


From 7dbe5c542464a511f0ea6a14e3ff08874d7e21d5 Mon Sep 17 00:00:00 2001
From: Chris Zankel <chris@zankel.net>
Date: Thu, 16 Apr 2009 00:28:09 -0700
Subject: xtensa: Fix checksum header file

We need to add a "memory" dependency (barrier) in assembly macros
that access (read or write) memory. Otherwise, the compiler might
ill-optimize the order of memory accesses.

Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/include/asm/checksum.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index f84d3f00774..e4d831a3077 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -113,7 +113,8 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 	   are modified, we must also specify them as outputs, or gcc
 	   will assume they contain their original values. */
 		: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
-		: "1" (iph), "2" (ihl));
+		: "1" (iph), "2" (ihl)
+		: "memory");
 
 	return	csum_fold(sum);
 }
@@ -227,7 +228,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 		"1:\t"
 		: "=r" (sum), "=&r" (__dummy)
 		: "r" (saddr), "r" (daddr),
-		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "memory");
 
 	return csum_fold(sum);
 }
-- 
cgit v1.2.3


From 586411dcd1935f91796d5e8a29aa3cfdf01a01f4 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <jw@emlix.com>
Date: Mon, 11 May 2009 15:43:33 +0200
Subject: xtensa: always use correct stack pointer for stack traces

Commit '28a0ce7 xtensa: use correct stack pointer for stack traces'
changed the stack tracer from always reading the stack pointer
register to always using the saved value in the task descriptor.

The author was too dense to consider the fact that the saved stack
value is stale for a running process und thus unusable for 'current'.

What we do now is to use the stack pointer register (a1) for when the
task is unknown - we can't help it then - or when the task is
'current'.  For everything else use the saved stack pointer value
contained in the task descriptor.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/kernel/traps.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 9f0b71189e9..ba9ab934978 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -369,6 +369,18 @@ void show_regs(struct pt_regs * regs)
 		       regs->syscall);
 }
 
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+	unsigned long *sp;
+
+	if (!task || task == current)
+		__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+	else
+		sp = (unsigned long *)task->thread.sp;
+
+	return sp;
+}
+
 void show_trace(struct task_struct *task, unsigned long *sp)
 {
 	unsigned long a0, a1, pc;
@@ -377,7 +389,7 @@ void show_trace(struct task_struct *task, unsigned long *sp)
 	if (sp)
 		a1 = (unsigned long)sp;
 	else
-		a1 = task->thread.sp;
+		a1 = (unsigned long)stack_pointer(task);
 
 	sp_start = a1 & ~(THREAD_SIZE-1);
 	sp_end = sp_start + THREAD_SIZE;
@@ -420,7 +432,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	unsigned long *stack;
 
 	if (!sp)
-		sp = (unsigned long *)task->thread.sp;
+		sp = stack_pointer(task);
  	stack = sp;
 
 	printk("\nStack: ");
-- 
cgit v1.2.3


From 1fb137c1e33cd188b40b3c0d7283412efeeb783f Mon Sep 17 00:00:00 2001
From: Johannes Weiner <jw@emlix.com>
Date: Mon, 11 May 2009 15:43:34 +0200
Subject: xtensa: register gpio chip before use

Platform initialization sets up the LED heartbeat that is controlled
via GPIO.  Requesting the GPIO pins fails, however, as the chip is
only initialized later by a device_initcall().

Fix this up by exporting the initialization function.  Let the
platform set up the chip before it starts using it.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/platforms/s6105/setup.c               | 3 +++
 arch/xtensa/variants/s6000/gpio.c                 | 3 +--
 arch/xtensa/variants/s6000/include/variant/gpio.h | 6 ++++++
 3 files changed, 10 insertions(+), 2 deletions(-)
 create mode 100644 arch/xtensa/variants/s6000/include/variant/gpio.h

diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c
index ae041d5027a..855ddeadc43 100644
--- a/arch/xtensa/platforms/s6105/setup.c
+++ b/arch/xtensa/platforms/s6105/setup.c
@@ -10,6 +10,8 @@
 #include <asm/bootparam.h>
 
 #include <variant/hardware.h>
+#include <variant/gpio.h>
+
 #include <platform/gpio.h>
 
 void platform_halt(void)
@@ -47,6 +49,7 @@ void __init platform_setup(char **cmdline)
 
 void __init platform_init(bp_tag_t *first)
 {
+	s6_gpio_init();
 	gpio_request(GPIO_LED1_NGREEN, "led1_green");
 	gpio_request(GPIO_LED1_RED, "led1_red");
 	gpio_direction_output(GPIO_LED1_NGREEN, 1);
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index 33a8d952934..79317fdcf14 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -64,8 +64,7 @@ static struct gpio_chip gpiochip = {
 	.exported = 0, /* no exporting to userspace */
 };
 
-static int gpio_init(void)
+int s6_gpio_init(void)
 {
 	return gpiochip_add(&gpiochip);
 }
-device_initcall(gpio_init);
diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h
new file mode 100644
index 00000000000..8327f62167e
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_VARIANT_S6000_GPIO_H
+#define _XTENSA_VARIANT_S6000_GPIO_H
+
+extern int s6_gpio_init(void);
+
+#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
-- 
cgit v1.2.3


From d15f05eb8cc4ad59699c16b8ae834b85c6d39bfe Mon Sep 17 00:00:00 2001
From: Oskar Schirmer <os@emlix.com>
Date: Mon, 11 May 2009 15:43:35 +0200
Subject: xtensa: fix wrong extern declaration renamed in code using it

The variable ccount_nsec has been renamed to nsec_per_ccount
in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05),
but the fix failed to rename the variable in
arch/xtensa/include/asm/timex.h as well.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/include/asm/timex.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index b83a8181d44..053bc427210 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -39,9 +39,9 @@
 
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 extern unsigned long ccount_per_jiffy;
-extern unsigned long ccount_nsec;
+extern unsigned long nsec_per_ccount;
 #define CCOUNT_PER_JIFFY ccount_per_jiffy
-#define NSEC_PER_CCOUNT  ccount_nsec
+#define NSEC_PER_CCOUNT  nsec_per_ccount
 #else
 #define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
 #define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
-- 
cgit v1.2.3


From b070a03f6490b0ac8d95c51b55a64e433d9160ab Mon Sep 17 00:00:00 2001
From: Oskar Schirmer <os@emlix.com>
Date: Mon, 11 May 2009 15:43:36 +0200
Subject: xtensa: implement ccount calibration for s6000

Calculate core frequency from timers at boot time
instead of assuming a fixed frequency. This is
useful as the true frequency is set up by the
boot loader, thus variable.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/Kconfig                 |  1 +
 arch/xtensa/variants/s6000/Makefile |  1 +
 arch/xtensa/variants/s6000/delay.c  | 27 +++++++++++++++++++++++++++
 3 files changed, 29 insertions(+)
 create mode 100644 arch/xtensa/variants/s6000/delay.c

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 30d21a9e2ef..ebe228d02b0 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -80,6 +80,7 @@ config XTENSA_VARIANT_S6000
 	bool "s6000 - Stretch software configurable processor"
 	select VARIANT_IRQ_SWITCH
 	select ARCH_REQUIRE_GPIOLIB
+	select XTENSA_CALIBRATE_CCOUNT
 endchoice
 
 config XTENSA_UNALIGNED_USER
diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile
index 03b3975468b..d83f3805130 100644
--- a/arch/xtensa/variants/s6000/Makefile
+++ b/arch/xtensa/variants/s6000/Makefile
@@ -1,3 +1,4 @@
 # s6000 Makefile
 
 obj-y		+= irq.o gpio.o
+obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT)	+= delay.o
diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c
new file mode 100644
index 00000000000..54b2b573f16
--- /dev/null
+++ b/arch/xtensa/variants/s6000/delay.c
@@ -0,0 +1,27 @@
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <variant/hardware.h>
+
+#define LOOPS 10
+void platform_calibrate_ccount(void)
+{
+	u32 uninitialized_var(a);
+	u32 uninitialized_var(u);
+	u32 b;
+	u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
+	int i = LOOPS+1;
+	do {
+		u32 t = u;
+		asm volatile(
+		"1:	l32i %0, %2, 0 ;"
+		"	beq %0, %1, 1b ;"
+		: "=&a"(u) : "a"(t), "a"(tstamp));
+		b = xtensa_get_ccount();
+		if (i == LOOPS)
+			a = b;
+	} while (--i >= 0);
+	b -= a;
+	nsec_per_ccount = (LOOPS * 10000) / b;
+	ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+}
-- 
cgit v1.2.3


From 866e514d6a584810dc3ae25364f823b890b7d312 Mon Sep 17 00:00:00 2001
From: Oskar Schirmer <os@emlix.com>
Date: Mon, 11 May 2009 15:43:37 +0200
Subject: xtensa: update s6105_defconfig for ccount calibration

The previous patch enabled ccount calibration for the s6000 variant.
This patch updates the defconfig for the s6105 platform to reflect this
change.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/configs/s6105_defconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 6e1deff4159..768bee00603 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -115,7 +115,7 @@ CONFIG_XTENSA_VARIANT_S6000=y
 CONFIG_PREEMPT=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_HIGHMEM is not set
-# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
 CONFIG_SERIAL_CONSOLE=y
 # CONFIG_XTENSA_ISS_NETWORK is not set
 
@@ -131,7 +131,6 @@ CONFIG_SERIAL_CONSOLE=y
 # CONFIG_XTENSA_PLATFORM_ISS is not set
 # CONFIG_XTENSA_PLATFORM_XT2000 is not set
 CONFIG_XTENSA_PLATFORM_S6105=y
-CONFIG_XTENSA_CPU_CLOCK=300
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
-- 
cgit v1.2.3


From 78f3cdfa2ac0aa2b72b3ee7e4b3c3e550230179f Mon Sep 17 00:00:00 2001
From: Chris Zankel <chris@zankel.net>
Date: Tue, 21 Apr 2009 00:34:15 -0700
Subject: xtensa: Fix linker script to include .literal sections

Fix resembles implementation from Marc Gauthier and Piet Denaly:

In the Xtensa architecture, assembly generates literals which must always
precede the code (the L32R instruction that loads them only uses negative
PC-relative offsets).  For any *.text section, literals are placed in a
corresponding *.literal section.  The linker script (vmlinux.lds) must
place these in the correct order.  It must also combine them, when the
*.text section can be larger than L32R's 256 kB range.

For example, this doesn't work:  *(.literal) *(.text) because L32R
instructions at the end of .text can't reach the literals.

The linker can solve this if they are combined in parentheses, like this:
       *(.literal .text)
because it is now allowed mix literals in .text to bring them in range.

None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT
and INIT_TEXT.  To avoid replicating the logic of that header file, we
instead post-process the generated linker script to convert *(xxx.text)
to *(xxx.literal xxx.text) for the following text sections:
       .text .ref.text .*init.text .*exit.text .text.*
using a sed script.  To do this we must override the default rule for
vmlinux.lds (see scripts/Makefile.build and the top-level Makefile)
to insert this extra step.

Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Pete Delaney <piet@tensilica.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
---
 arch/xtensa/kernel/Makefile      | 21 ++++++++++++++++++---
 arch/xtensa/kernel/vmlinux.lds.S |  4 +---
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 7419dbccf02..fe3186de6a3 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -4,15 +4,30 @@
 
 extra-y := head.o vmlinux.lds
 
-
 obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
 	 setup.o signal.o syscall.o time.o traps.o vectors.o platform.o  \
 	 pci-dma.o init_task.o io.o
 
-## windowspill.o
-
 obj-$(CONFIG_KGDB) += xtensa-stub.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
 
+# In the Xtensa architecture, assembly generates literals which must always
+# precede the L32R instruction with a relative offset less than 256 kB.
+# Therefore, the .text and .literal section must be combined in parenthesis
+# in the linker script, such as: *(.literal .text).
+#
+# We need to post-process the generated vmlinux.lds scripts to convert
+# *(xxx.text) to  *(xxx.literal xxx.text) for the following text sections:
+#   .text .ref.text .*init.text .*exit.text .text.*
+#
+# Replicate rules in scripts/Makefile.build
+
+sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g'	\
+	-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
+
+quiet_cmd__cpp_lds_S = LDS     $@
+      cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
 
+$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
+	$(call if_changed_dep,_cpp_lds_S)
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 5accf51053d..41c159cd872 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -87,7 +87,7 @@ SECTIONS
   {
     /* The HEAD_TEXT section must be the first section! */
     HEAD_TEXT
-    *(.literal .text)
+    TEXT_TEXT
     VMLINUX_SYMBOL(__sched_text_start) = .;
     *(.sched.literal .sched.text)
     VMLINUX_SYMBOL(__sched_text_end) = .;
@@ -139,8 +139,6 @@ SECTIONS
   __init_begin = .;
   .init.text : {
   	_sinittext = .;
-	*(.init.literal) *(.cpuinit.literal) 
-	*(.devinit.literal) *(.meminit.literal)
 	INIT_TEXT
 	_einittext = .;
   }
-- 
cgit v1.2.3


From af498d7fa3e786f52650819a56e117ed9a40920c Mon Sep 17 00:00:00 2001
From: Kazuhisa Ichikawa <ki@epsilou.com>
Date: Tue, 12 May 2009 13:27:45 +0200
Subject: block: fix the bio_vec array index out-of-bounds test

Current bio_vec array index out-of-bounds test within
__end_that_request_first() does not seem correct.
It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code
uses idx (which is, bio->bi_idx + next_idx) as the array index into
bio_vec array. This means that the test really make sense only at
the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx
== zero). Fix this by replacing bio->bi_idx with idx.
(This patch applies to 2.6.30-rc4.)

Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 2998fe3a237..c89883be873 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1768,10 +1768,10 @@ static int __end_that_request_first(struct request *req, int error,
 		} else {
 			int idx = bio->bi_idx + next_idx;
 
-			if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
+			if (unlikely(idx >= bio->bi_vcnt)) {
 				blk_dump_rq_flags(req, "__end_that");
 				printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
-				       __func__, bio->bi_idx, bio->bi_vcnt);
+				       __func__, idx, bio->bi_vcnt);
 				break;
 			}
 
-- 
cgit v1.2.3


From 05dc7b613481c695bb4fc476c6fbb46364b63f62 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Tue, 12 May 2009 13:28:23 +0200
Subject: viocd: needs to depend on BLOCK

Fix this build error when CONFIG_BLOCK is not set:
drivers/cdrom/viocd.c: In function 'viocd_blk_open':
drivers/cdrom/viocd.c:156: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_release':
drivers/cdrom/viocd.c:162: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_ioctl':
drivers/cdrom/viocd.c:170: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_media_changed':
drivers/cdrom/viocd.c:176: error: dereferencing pointer to incomplete type
...

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 arch/powerpc/platforms/iseries/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 647e8778743..47a20cfb448 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -17,6 +17,7 @@ config VIODASD
 
 config VIOCD
 	tristate "iSeries Virtual I/O CD support"
+	depends on BLOCK
 	select VIOPATH
 	help
 	  If you are running Linux on an IBM iSeries system and you want to
-- 
cgit v1.2.3


From 34fd5dad46fc494c6ed3b174b2c991ea9961ebe9 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Tue, 12 May 2009 11:33:39 +0100
Subject: Remove unreached code in drivers/net/mlx4/en_rx.c

Remove the return after the goto.  We want the goto because it frees
memory as well as returning err.

Found by smatch (http://repo.or.cz/w/smatch.git).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/mlx4/en_rx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 7942c4d3cd8..9ee873e872b 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -951,7 +951,6 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
 	if (err) {
 		mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
 		goto out;
-		return err;
 	}
 	qp->event = mlx4_en_sqp_event;
 
-- 
cgit v1.2.3


From f29ce72795bf335553ab972606bc576b5473995e Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Tue, 12 May 2009 09:08:31 -0700
Subject: drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED

People keep getting bitten by this, so just auto-select it by default,
assuming most configurations will actually want a console.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 3a22eb9be37..17b24c580c0 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -71,6 +71,7 @@ config DRM_I915
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select FB
+	select FRAMEBUFFER_CONSOLE if !EMBEDDED
 	tristate "i915 driver"
 	help
 	  Choose this option if you have a system that has Intel 830M, 845G,
-- 
cgit v1.2.3


From d80c19df5fcceb8c741e96f09f275c2da719efef Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 12 May 2009 16:29:13 +0200
Subject: lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS

Now that lockdep coverage has increased it has become easier to
run out of entries:

[   21.401387] BUG: MAX_LOCKDEP_ENTRIES too low!
[   21.402007] turning off the locking correctness validator.
[   21.402007] Pid: 1555, comm: S99local Not tainted 2.6.30-rc5-tip #2
[   21.402007] Call Trace:
[   21.402007]  [<ffffffff81069789>] add_lock_to_list+0x53/0xba
[   21.402007]  [<ffffffff810eb615>] ? lookup_mnt+0x19/0x53
[   21.402007]  [<ffffffff8106be14>] check_prev_add+0x14b/0x1c7
[   21.402007]  [<ffffffff8106c304>] validate_chain+0x474/0x52a
[   21.402007]  [<ffffffff8106c6fc>] __lock_acquire+0x342/0x3c7
[   21.402007]  [<ffffffff8106c842>] lock_acquire+0xc1/0xe5
[   21.402007]  [<ffffffff810eb615>] ? lookup_mnt+0x19/0x53
[   21.402007]  [<ffffffff8153aedc>] _spin_lock+0x31/0x66

Double the size - as we've done in the past.

[ Impact: allow lockdep to cover more locks ]

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/lockdep_internals.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h
index a2cc7e9a6e8..699a2ac3a0d 100644
--- a/kernel/lockdep_internals.h
+++ b/kernel/lockdep_internals.h
@@ -54,9 +54,9 @@ enum {
  * table (if it's not there yet), and we check it for lock order
  * conflicts and deadlocks.
  */
-#define MAX_LOCKDEP_ENTRIES	8192UL
+#define MAX_LOCKDEP_ENTRIES	16384UL
 
-#define MAX_LOCKDEP_CHAINS_BITS	14
+#define MAX_LOCKDEP_CHAINS_BITS	15
 #define MAX_LOCKDEP_CHAINS	(1UL << MAX_LOCKDEP_CHAINS_BITS)
 
 #define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5)
-- 
cgit v1.2.3


From 6f733a349c2b70a83b5451fbe61ef2cf67d41cdf Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Mon, 11 May 2009 09:58:19 -0700
Subject: ARM: OMAP: GPIO de-bounce clocks don't affect module idle state

GPIO de-bounce clocks don't have any impact on the module idle state, so
the clock code should not wait for the module to enable after the de-bounce
clocks are enabled.

Problem found by Kevin Hilman <khilman@deeprootsystems.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock34xx.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 6763b8f7302..017a30e9aa1 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-- 
cgit v1.2.3


From eaf9393bb79a9c7c8e708669f9581ca466122430 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Tue, 12 May 2009 11:20:02 -0700
Subject: ARM: OMAP2: Fix tusb6010 init error and compilation warning

Fix "tusb6010 init error 5, -19" and compilation warning from function
tusb6010_platform_retime "warning: 'sysclk_ps' is used uninitialized in this
function".

I suppose commit c094ba34b8f780885d029ce3c2715a194b780e5d was meant to test
for zero fclk_ps instead of sysclk_ps.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Roel Kluin <roel.kluin@gmail.com>
Tested-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/usb-tusb6010.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 8df55f40f4c..8622c24cd27 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
 	unsigned	sysclk_ps;
 	int		status;
 
-	if (!refclk_psec || sysclk_ps == 0)
+	if (!refclk_psec || fclk_ps == 0)
 		return -ENODEV;
 
 	sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
-- 
cgit v1.2.3


From c8a799b03a981b4b27d8fd7320c96cfbe781b2fb Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Tue, 12 May 2009 11:20:02 -0700
Subject: ARM: OMAP2: Fix SPI driver failure on 2420 when running multi-omap
 config

SPI driver will do unhandled fault on OMAP2420 if trying to probe
non-existing SPI busses. Register those additional busses runtime only
for cpus having them.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 496983ade97..894cc355818 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -354,10 +354,12 @@ static void omap_init_mcspi(void)
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
-	platform_device_register(&omap2_mcspi3);
+	if (cpu_is_omap2430() || cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi3);
 #endif
 #ifdef CONFIG_ARCH_OMAP3
-	platform_device_register(&omap2_mcspi4);
+	if (cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi4);
 #endif
 }
 
-- 
cgit v1.2.3


From 4ea60b0c7a8487af5de736d394b147baf7691f3c Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 12 May 2009 11:20:03 -0700
Subject: ARM: OMAP2/3: Add name for musb clocks

With the clkdev, musb_core.c needs to register clock with name "ick".

Once all the platforms using the musb driver have been converted
to use clockdev, the clock name does not need to be passed
from the low-level init code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock24xx.c | 2 +-
 arch/arm/mach-omap2/clock34xx.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index efc59c49341..ff9b4c0b00a 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
 	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 0a14dca31e3..a0575393d0e 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
-- 
cgit v1.2.3


From 9c1ee184a30394e54165fa4c15923cabd952c106 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Wed, 13 May 2009 18:36:58 -0400
Subject: ext4: Fix sub-block zeroing for writes into preallocated extents

We need to mark the buffer_head mapping preallocated space as new
during write_begin. Otherwise we don't zero out the page cache content
properly for a partial write. This will cause file corruption with
preallocation.

Now that we mark the buffer_head new we also need to have a valid
buffer_head blocknr so that unmap_underlying_metadata() unmaps the
correct block.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/extents.c | 2 ++
 fs/ext4/inode.c   | 7 +++++++
 2 files changed, 9 insertions(+)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e4033215834..172656c2a3b 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2875,6 +2875,8 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 				if (allocated > max_blocks)
 					allocated = max_blocks;
 				set_buffer_unwritten(bh_result);
+				bh_result->b_bdev = inode->i_sb->s_bdev;
+				bh_result->b_blocknr = newblock;
 				goto out2;
 			}
 
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index e91f978c7f1..d4b634ae06b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2323,6 +2323,13 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 		set_buffer_delay(bh_result);
 	} else if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
+		/*
+		 * With sub-block writes into unwritten extents
+		 * we also need to mark the buffer as new so that
+		 * the unwritten parts of the buffer gets correctly zeroed.
+		 */
+		if (buffer_unwritten(bh_result))
+			set_buffer_new(bh_result);
 		ret = 0;
 	}
 
-- 
cgit v1.2.3


From 33b9817e2ae097c7b8d256e3510ac6c54fc6d9d0 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Tue, 12 May 2009 14:40:37 -0400
Subject: ext4: Use a fake block number for delayed new buffer_head

Use a very large unsigned number (~0xffff) as as the fake block number
for the delayed new buffer. The VFS should never try to write out this
number, but if it does, this will make it obvious.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d4b634ae06b..0ac31a06422 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2297,6 +2297,10 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 				  struct buffer_head *bh_result, int create)
 {
 	int ret = 0;
+	sector_t invalid_block = ~((sector_t) 0xffff);
+
+	if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+		invalid_block = ~0;
 
 	BUG_ON(create == 0);
 	BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
@@ -2318,7 +2322,7 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 			/* not enough space to reserve */
 			return ret;
 
-		map_bh(bh_result, inode->i_sb, 0);
+		map_bh(bh_result, inode->i_sb, invalid_block);
 		set_buffer_new(bh_result);
 		set_buffer_delay(bh_result);
 	} else if (ret > 0) {
-- 
cgit v1.2.3


From 7348d82a67b3fe0363e7f0679b50ecbdc65116c7 Mon Sep 17 00:00:00 2001
From: Daniel Ribeiro <drwyrm@gmail.com>
Date: Tue, 12 May 2009 13:19:36 -0700
Subject: pxa2xx_spi: prevent panic case setup() fails

setup() may fail before ctldata is set, causing a kernel panic on
cleanup().

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/pxa2xx_spi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 885194a0741..3f3c08c6ba4 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1373,6 +1373,9 @@ static void cleanup(struct spi_device *spi)
 {
 	struct chip_data *chip = spi_get_ctldata(spi);
 
+	if (!chip)
+		return;
+
 	if (gpio_is_valid(chip->gpio_cs))
 		gpio_free(chip->gpio_cs);
 
-- 
cgit v1.2.3


From ecf4667d30dd63fa130e22f8f2da3e6ce003358b Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 12 May 2009 13:19:37 -0700
Subject: syscalls.h add the missing sys_pipe2 declaration

In order to build the generic syscall table, we need a declaration for
every system call.  sys_pipe2 was added without a proper declaration, so
add this to syscalls.h now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/syscalls.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 40617c1d897..30520844b8d 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -433,6 +433,7 @@ asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg);
 asmlinkage long sys_fcntl64(unsigned int fd,
 				unsigned int cmd, unsigned long arg);
 #endif
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
 asmlinkage long sys_dup(unsigned int fildes);
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
 asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
-- 
cgit v1.2.3


From f993004d73f266a02f3ac736fafb033c600972d9 Mon Sep 17 00:00:00 2001
From: Kim Kyuwon <q1.kim@samsung.com>
Date: Tue, 12 May 2009 13:19:38 -0700
Subject: rtc: rtc-twl4030 don't mask alarm interrupts on suspend

This patch enables the alarm interrupt of TWL4030 RTC to wake up the
system from suspend. You can test this patch with following command.

# echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state;

Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-twl4030.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index a6341e4f9a0..9c8c70c497d 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -495,9 +495,7 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	irqstat = rtc_irq_bits;
 
-	/* REVISIT alarm may need to wake us from sleep */
-	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
-			 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 9aa7a7d5daa7e33d7e7656bffe76af67c1bf56d2 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 12 May 2009 13:19:39 -0700
Subject: alpha: unbreak percpu again

Commit 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e ("FRV: Fix the section
attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU()
macros and in the process made alpha percpu.h include
include/asm-generic/percpu.h which breaks compilation due to duplicate
definitions.

Remove inclusion of generic asm helper file and define whatever necessary
in alpha header proper.

In the longer term, percpu definitions will be unified and all these
little subtlties will be removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/percpu.h | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index e9e0bb5a23b..06c5c7a4afd 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -1,7 +1,9 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */
-- 
cgit v1.2.3


From ee83126bb17f6216e8815a4146e80032b4d80ba4 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Tue, 12 May 2009 13:19:41 -0700
Subject: fbdev: remove outdated advice about I2C configuration

The required I2C modules are now selected automatically by the means
of select statements in Kconfig, so there is no point in confusing the
users with options he/she would be supposed to enable manually.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/Kconfig | 23 ++++-------------------
 1 file changed, 4 insertions(+), 19 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7826bdce4bb..0048f1185a6 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1128,13 +1128,6 @@ config FB_INTEL
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
           Say Y if you have and plan to use such a board.
 
-	  If you say Y here and want DDC/I2C support you must first say Y to
-	  "I2C support" and "I2C bit-banging support" in the character devices
-	  section.
-
-	  If you say M here then "I2C support" and "I2C bit-banging support"
-	  can be build either as modules or built-in.
-
 	  To compile this driver as a module, choose M here: the
 	  module will be called intelfb.
 
@@ -1207,11 +1200,10 @@ config FB_MATROX_G
 	  pixel and 32 bpp packed pixel. You can also use font widths
 	  different from 8.
 
-	  If you need support for G400 secondary head, you must first say Y to
-	  "I2C support" in the character devices section, and then to
-	  "Matrox I2C support" and "G400 second head support" here in the
-	  framebuffer section. G450/G550 secondary head and digital output
-	  are supported without additional modules.
+	  If you need support for G400 secondary head, you must say Y to
+	  "Matrox I2C support" and "G400 second head support" right below.
+	  G450/G550 secondary head and digital output are supported without
+	  additional modules.
 
 	  The driver starts in monitor mode. You must use the matroxset tool 
 	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
@@ -1310,13 +1302,6 @@ config FB_RADEON
 	  a framebuffer device.  There are both PCI and AGP versions.  You
 	  don't need to choose this to run the Radeon in plain VGA mode.
 
-	  If you say Y here and want DDC/I2C support you must first say Y to
-	  "I2C support" and "I2C bit-banging support" in the character devices
-	  section.
-
-	  If you say M here then "I2C support" and "I2C bit-banging support" 
-	  can be build either as modules or built-in.
-
 	  There is a product page at
 	  http://apps.ati.com/ATIcompare/
 
-- 
cgit v1.2.3


From ee1ef82c7e6d073f881952348960bbc639687482 Mon Sep 17 00:00:00 2001
From: Harald Welte <HaraldWelte@viatech.com>
Date: Tue, 12 May 2009 13:19:42 -0700
Subject: viafb: make it work on x86_64

Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU).

You cannot make the assumption that sizeof(unsigned int) ==
sizeof(unsigned long), so the parsing of the default mode (640x480) fails,
leading to a division by zero during insmod of the driver.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Cc: <JosephChan@via.com.tw>
Cc: <ScottFang@viatech.com.cn>
Cc: Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/via/viafbdev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index e327b84820d..a0fec298216 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -2103,7 +2103,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
 
 static int __devinit via_pci_probe(void)
 {
-	unsigned int default_xres, default_yres;
+	unsigned long default_xres, default_yres;
 	char *tmpc, *tmpm;
 	char *tmpc_sec, *tmpm_sec;
 	int vmode_index;
@@ -2196,8 +2196,8 @@ static int __devinit via_pci_probe(void)
 	viafb_FB_MM = viaparinfo->fbmem_virt;
 	tmpm = viafb_mode;
 	tmpc = strsep(&tmpm, "x");
-	strict_strtoul(tmpc, 0, (unsigned long *)&default_xres);
-	strict_strtoul(tmpm, 0, (unsigned long *)&default_yres);
+	strict_strtoul(tmpc, 0, &default_xres);
+	strict_strtoul(tmpm, 0, &default_yres);
 
 	vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
 	DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
-- 
cgit v1.2.3


From bfe3891a5f5d3b78146a45f40e435d14f5ae39dd Mon Sep 17 00:00:00 2001
From: Davide Libenzi <davidel@xmailserver.org>
Date: Tue, 12 May 2009 13:19:44 -0700
Subject: epoll: fix size check in epoll_create()

Fix a size check WRT the manual pages.  This was inadvertently broken by
commit 9fe5ad9c8cef9ad5873d8ee55d1cf00d9b607df0 ("flag parameters
add-on: remove epoll_create size param").

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: <Hiroyuki.Mach@gmail.com>
Cc: rohit verma <rohit.170309@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/eventpoll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index a89f370fadb..5458e80fc55 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1212,7 +1212,7 @@ SYSCALL_DEFINE1(epoll_create1, int, flags)
 
 SYSCALL_DEFINE1(epoll_create, int, size)
 {
-	if (size < 0)
+	if (size <= 0)
 		return -EINVAL;
 
 	return sys_epoll_create1(0);
-- 
cgit v1.2.3


From 4f005dbe5584fe54c9f6d6d4f0acd3fb29be84da Mon Sep 17 00:00:00 2001
From: Maciej Sosnowski <maciej.sosnowski@intel.com>
Date: Thu, 23 Apr 2009 12:31:51 +0200
Subject: ioatdma: fix "ioatdma frees DMA memory with wrong function"

as reported by Alexander Beregalov <a.beregalov@gmail.com>

ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with
wrong function [device address=0x000000007f76f800] [size=2000 bytes]
[map
ped as single] [unmapped as page]

The ioatdma driver was unmapping all regions
(either allocated as page or single) using unmap_page.
This patch lets dma driver recognize if unmap_single or unmap_page should be used.
It introduces two new dma control flags:
DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE.
They should be set to indicate dma driver to do dma-unmapping as single
(first one for the source, tha latter for the destination).
If respective flag is not set, the driver assumes dma-unmapping as page.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/dmaengine.c   | 17 +++++++++++------
 drivers/dma/ioat_dma.c    | 45 ++++++++++++++++++++++++++++-----------------
 include/linux/dmaengine.h |  6 ++++++
 3 files changed, 45 insertions(+), 23 deletions(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 92438e9dacc..5a87384ea4f 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -804,11 +804,14 @@ dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest,
 	dma_addr_t dma_dest, dma_src;
 	dma_cookie_t cookie;
 	int cpu;
+	unsigned long flags;
 
 	dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE);
 	dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE);
-	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
-					 DMA_CTRL_ACK);
+	flags = DMA_CTRL_ACK |
+		DMA_COMPL_SRC_UNMAP_SINGLE |
+		DMA_COMPL_DEST_UNMAP_SINGLE;
+	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
 
 	if (!tx) {
 		dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -850,11 +853,12 @@ dma_async_memcpy_buf_to_pg(struct dma_chan *chan, struct page *page,
 	dma_addr_t dma_dest, dma_src;
 	dma_cookie_t cookie;
 	int cpu;
+	unsigned long flags;
 
 	dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE);
 	dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE);
-	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
-					 DMA_CTRL_ACK);
+	flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE;
+	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
 
 	if (!tx) {
 		dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -898,12 +902,13 @@ dma_async_memcpy_pg_to_pg(struct dma_chan *chan, struct page *dest_pg,
 	dma_addr_t dma_dest, dma_src;
 	dma_cookie_t cookie;
 	int cpu;
+	unsigned long flags;
 
 	dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE);
 	dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len,
 				DMA_FROM_DEVICE);
-	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
-					 DMA_CTRL_ACK);
+	flags = DMA_CTRL_ACK;
+	tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
 
 	if (!tx) {
 		dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE);
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index e4fc33c1c32..1955ee8d6d2 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1063,22 +1063,31 @@ static void ioat_dma_cleanup_tasklet(unsigned long data)
 static void
 ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
 {
-	/*
-	 * yes we are unmapping both _page and _single
-	 * alloc'd regions with unmap_page. Is this
-	 * *really* that bad?
-	 */
-	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP))
-		pci_unmap_page(ioat_chan->device->pdev,
-				pci_unmap_addr(desc, dst),
-				pci_unmap_len(desc, len),
-				PCI_DMA_FROMDEVICE);
-
-	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP))
-		pci_unmap_page(ioat_chan->device->pdev,
-				pci_unmap_addr(desc, src),
-				pci_unmap_len(desc, len),
-				PCI_DMA_TODEVICE);
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+		if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+			pci_unmap_single(ioat_chan->device->pdev,
+					 pci_unmap_addr(desc, dst),
+					 pci_unmap_len(desc, len),
+					 PCI_DMA_FROMDEVICE);
+		else
+			pci_unmap_page(ioat_chan->device->pdev,
+				       pci_unmap_addr(desc, dst),
+				       pci_unmap_len(desc, len),
+				       PCI_DMA_FROMDEVICE);
+	}
+
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+		if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+			pci_unmap_single(ioat_chan->device->pdev,
+					 pci_unmap_addr(desc, src),
+					 pci_unmap_len(desc, len),
+					 PCI_DMA_TODEVICE);
+		else
+			pci_unmap_page(ioat_chan->device->pdev,
+				       pci_unmap_addr(desc, src),
+				       pci_unmap_len(desc, len),
+				       PCI_DMA_TODEVICE);
+	}
 }
 
 /**
@@ -1363,6 +1372,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 	int err = 0;
 	struct completion cmp;
 	unsigned long tmo;
+	unsigned long flags;
 
 	src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
 	if (!src)
@@ -1392,8 +1402,9 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 				 DMA_TO_DEVICE);
 	dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
 				  DMA_FROM_DEVICE);
+	flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE;
 	tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
-						   IOAT_TEST_SIZE, 0);
+						   IOAT_TEST_SIZE, flags);
 	if (!tx) {
 		dev_err(&device->pdev->dev,
 			"Self-test prep failed, disabling\n");
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 2e2aa3df170..ffefba81c81 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -78,12 +78,18 @@ enum dma_transaction_type {
  * 	dependency chains
  * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
  * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
+ * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
+ * 	(if not set, do the source dma-unmapping as page)
+ * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
+ * 	(if not set, do the destination dma-unmapping as page)
  */
 enum dma_ctrl_flags {
 	DMA_PREP_INTERRUPT = (1 << 0),
 	DMA_CTRL_ACK = (1 << 1),
 	DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
 	DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
+	DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
+	DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
 };
 
 /**
-- 
cgit v1.2.3


From ad567ffb32f067b30606071eb568cf637fe42185 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 12 May 2009 09:16:29 +0200
Subject: dma: fix ipu_idmac.c to not discard the last queued buffer

This also fixes the case of a single queued buffer, for example, when taking a
single frame snapshot with the mx3_camera driver.

Reported-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Tested-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/ipu/ipu_idmac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 3a4deea78a7..9a5bc1a7389 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1272,7 +1272,8 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id)
 	/* Other interrupts do not interfere with this channel */
 	spin_lock(&ichan->lock);
 	if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
-		     ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+		     ((curbuf >> chan_id) & 1) == ichan->active_buffer &&
+		     !list_is_last(ichan->queue.next, &ichan->queue))) {
 		int i = 100;
 
 		/* This doesn't help. See comment in ipu_disable_channel() */
-- 
cgit v1.2.3


From a37b06d589f2c687a38d07569f4ef97c650fde39 Mon Sep 17 00:00:00 2001
From: Doug Chapman <doug.chapman@hp.com>
Date: Wed, 13 May 2009 02:56:39 +0100
Subject: Squashfs: fix breakage when page size > metadata block size

Squashfs is broken on any system where the page size is larger than
the metadata size (8192).  This is easily fixed by ensuring cache->pages
is always > 0.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
---
 fs/squashfs/cache.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index 1c4739e33af..40c98fa6b5d 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -252,6 +252,7 @@ struct squashfs_cache *squashfs_cache_init(char *name, int entries,
 	cache->entries = entries;
 	cache->block_size = block_size;
 	cache->pages = block_size >> PAGE_CACHE_SHIFT;
+	cache->pages = cache->pages ? cache->pages : 1;
 	cache->name = name;
 	cache->num_waiters = 0;
 	spin_lock_init(&cache->lock);
-- 
cgit v1.2.3


From fffb47b80e8bb3f171ef02b90b1ae22c63983979 Mon Sep 17 00:00:00 2001
From: Phillip Lougher <phillip@lougher.demon.co.uk>
Date: Wed, 13 May 2009 02:59:26 +0100
Subject: Squashfs: check page size is not larger than the filesystem block
 size

Normally the block size (by default 128K) will be larger than the
page size, unless a non-standard block size has been specified in
Mksquashfs, and the page size is larger than 4K.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
---
 fs/squashfs/super.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index ffa6edcd2d0..0adc624c956 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -157,6 +157,16 @@ static int squashfs_fill_super(struct super_block *sb, void *data, int silent)
 	if (msblk->block_size > SQUASHFS_FILE_MAX_SIZE)
 		goto failed_mount;
 
+	/*
+	 * Check the system page size is not larger than the filesystem
+	 * block size (by default 128K).  This is currently not supported.
+	 */
+	if (PAGE_CACHE_SIZE > msblk->block_size) {
+		ERROR("Page size > filesystem block size (%d).  This is "
+			"currently not supported!\n", msblk->block_size);
+		goto failed_mount;
+	}
+
 	msblk->block_log = le16_to_cpu(sblk->block_log);
 	if (msblk->block_log > SQUASHFS_FILE_MAX_LOG)
 		goto failed_mount;
-- 
cgit v1.2.3


From e5d287539dba264a1d9d7607a25b8c8c61c9d658 Mon Sep 17 00:00:00 2001
From: Phillip Lougher <phillip@lougher.demon.co.uk>
Date: Wed, 13 May 2009 03:25:20 +0100
Subject: Squashfs: cody tidying, remove commented out line in Makefile

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
---
 fs/squashfs/Makefile | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index 8258cf9a031..70e3244fa30 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -5,4 +5,3 @@
 obj-$(CONFIG_SQUASHFS) += squashfs.o
 squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
 squashfs-y += namei.o super.o symlink.o
-#squashfs-y += squashfs2_0.o
-- 
cgit v1.2.3


From 44408ad7368906c84000e87a99c14a16dbb867fd Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Tue, 12 May 2009 13:31:40 -0700
Subject: xen: use header for EXPORT_SYMBOL_GPL

mmu.c needs to #include module.h to prevent these warnings:

 arch/x86/xen/mmu.c:239: warning: data definition has no type or storage class
 arch/x86/xen/mmu.c:239: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
 arch/x86/xen/mmu.c:239: warning: parameter names (without types) in function declaration

[ Impact: cleanup ]

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/mmu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index e25a78e1113..fba55b1a402 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -42,6 +42,7 @@
 #include <linux/highmem.h>
 #include <linux/debugfs.h>
 #include <linux/bug.h>
+#include <linux/module.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
-- 
cgit v1.2.3


From f2deae9d4e70793568ef9e85d227abb7bef5b622 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 13 May 2009 15:56:10 +0100
Subject: Remove implementation of readpage from the hugetlbfs_aops

The core VM assumes the page size used by the address_space in
inode->i_mapping is PAGE_SIZE but hugetlbfs breaks this assumption by
inserting pages into the page cache at offsets the core VM considers
unexpected.

This would not be a problem except that hugetlbfs also provide a
->readpage implementation.  As it exists, the core VM can assume the
base page size is being used, allocate pages on behalf of the
filesystem, insert them into the page cache and call ->readpage to
populate them.  These pages are the wrong size and at the wrong offset
for hugetlbfs causing confusion.

This patch deletes the ->readpage implementation for hugetlbfs on the
grounds the core VM should not be allocating and populating pages on
behalf of hugetlbfs.  There should be no existing users of the
->readpage implementation so it should not cause a regression.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/hugetlbfs/inode.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 153d9681192..c1462d43e72 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -312,16 +312,6 @@ out:
 	return retval;
 }
 
-/*
- * Read a page. Again trivial. If it didn't already exist
- * in the page cache, it is zero-filled.
- */
-static int hugetlbfs_readpage(struct file *file, struct page * page)
-{
-	unlock_page(page);
-	return -EINVAL;
-}
-
 static int hugetlbfs_write_begin(struct file *file,
 			struct address_space *mapping,
 			loff_t pos, unsigned len, unsigned flags,
@@ -701,7 +691,6 @@ static void hugetlbfs_destroy_inode(struct inode *inode)
 }
 
 static const struct address_space_operations hugetlbfs_aops = {
-	.readpage	= hugetlbfs_readpage,
 	.write_begin	= hugetlbfs_write_begin,
 	.write_end	= hugetlbfs_write_end,
 	.set_page_dirty	= hugetlbfs_set_page_dirty,
-- 
cgit v1.2.3


From 0f181328287db30671e9997329cff71395d4af8b Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 13 May 2009 08:29:12 -0700
Subject: Revert "Ignore madvise(MADV_WILLNEED) for hugetlbfs-backed regions"

This reverts commit a425a638c858fd10370b573bde81df3ba500e271.

Now that the previous commit removed the "readpage" actor for hugetlb
files, read-ahead will no longer mess up the mapping, and there's no
longer any reason to treat hugetlbfs mappings specially.

Tested-and-acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/madvise.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/mm/madvise.c b/mm/madvise.c
index 36d6ea2b634..b9ce574827c 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -112,14 +112,6 @@ static long madvise_willneed(struct vm_area_struct * vma,
 	if (!file)
 		return -EBADF;
 
-	/*
-	 * Page cache readahead assumes page cache pages are order-0 which
-	 * is not the case for hugetlbfs. Do not give a bad return value
-	 * but ignore the advice.
-	 */
-	if (vma->vm_flags & VM_HUGETLB)
-		return 0;
-
 	if (file->f_mapping->a_ops->get_xip_mem) {
 		/* no bad return value, but ignore advice */
 		return 0;
-- 
cgit v1.2.3


From aa512a27e9e8ed32f31b15eec67ab1ceca33839b Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Wed, 13 May 2009 13:52:19 -0400
Subject: x86/function-graph: fix constraint for recording old return value

After upgrading from gcc 4.2.2 to 4.4.0, the function graph tracer broke.
Investigating, I found that in the asm that replaces the return value,
gcc was using the same register for the old value as it was for the
new value.

	mov	(addr), old
	mov	new, (addr)

But if old and new are the same register, we clobber new with old!
I first thought this was a bug in gcc 4.4.0 and reported it:

  http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40132

Andrew Pinski responded (quickly), saying that it was correct gcc behavior
and the code needed to denote old as an "early clobber".

Instead of "=r"(old), we need "=&r"(old).

[Impact: keep function graph tracer from breaking with gcc 4.4.0 ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 18dfa30795c..b79c5533c42 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -442,7 +442,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		_ASM_EXTABLE(1b, 4b)
 		_ASM_EXTABLE(2b, 4b)
 
-		: [old] "=r" (old), [faulted] "=r" (faulted)
+		: [old] "=&r" (old), [faulted] "=r" (faulted)
 		: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
 		: "memory"
 	);
-- 
cgit v1.2.3


From fa0b5596a69795c2cc4c937b35ee1b7a40bf9462 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:24:24 -0500
Subject: powerpc/83xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/83xx/asp8347_defconfig       | 104 +++++++++++++------
 arch/powerpc/configs/83xx/mpc8313_rdb_defconfig   | 114 +++++++++++++++------
 arch/powerpc/configs/83xx/mpc8315_rdb_defconfig   | 114 +++++++++++++++------
 arch/powerpc/configs/83xx/mpc832x_mds_defconfig   | 107 +++++++++++++++-----
 arch/powerpc/configs/83xx/mpc832x_rdb_defconfig   | 113 +++++++++++++++------
 arch/powerpc/configs/83xx/mpc834x_itx_defconfig   | 108 ++++++++++++++------
 arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 108 ++++++++++++++------
 arch/powerpc/configs/83xx/mpc834x_mds_defconfig   | 103 ++++++++++++++-----
 arch/powerpc/configs/83xx/mpc836x_mds_defconfig   | 108 +++++++++++++++-----
 arch/powerpc/configs/83xx/mpc836x_rdk_defconfig   |  96 +++++++++++++-----
 arch/powerpc/configs/83xx/mpc837x_mds_defconfig   | 104 ++++++++++++++-----
 arch/powerpc/configs/83xx/mpc837x_rdb_defconfig   | 111 +++++++++++++++------
 arch/powerpc/configs/83xx/sbc834x_defconfig       |  96 +++++++++++++-----
 arch/powerpc/configs/mpc83xx_defconfig            | 115 ++++++++++++++++------
 14 files changed, 1115 insertions(+), 386 deletions(-)

diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index fc4a39a40e7..27893971377 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:47 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:05 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_ASP834x=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -469,7 +483,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -499,13 +512,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -532,6 +552,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -565,6 +586,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -584,6 +607,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -594,11 +618,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -608,7 +633,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -759,12 +783,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -796,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -810,11 +832,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -959,11 +984,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -991,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1006,6 +1030,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1067,8 +1092,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1079,6 +1105,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1100,6 +1127,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1154,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1166,7 +1199,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1233,6 +1265,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1248,11 +1281,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1274,13 +1308,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1309,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1381,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 409d017621a..c5c0fe71a43 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -600,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -626,6 +650,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -660,6 +685,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -697,6 +724,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -707,11 +735,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -721,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -730,6 +760,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -737,7 +768,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -815,6 +845,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -827,6 +858,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -889,12 +921,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -914,7 +943,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -942,6 +970,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -957,12 +986,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -981,6 +1013,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -1077,7 +1110,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1135,11 +1167,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1181,7 +1213,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1228,6 +1259,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1296,8 +1328,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1308,6 +1341,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1329,6 +1363,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1383,6 +1422,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1395,7 +1435,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1427,6 +1466,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1442,11 +1482,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1464,6 +1505,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1493,9 +1537,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1503,17 +1550,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1544,10 +1593,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1616,6 +1667,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 03db97c6cf3..af4952feba3 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:49 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_IDS=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -601,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -687,6 +711,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -721,6 +746,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -758,6 +785,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -768,11 +796,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -782,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -791,6 +821,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -798,7 +829,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -876,6 +906,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -888,6 +919,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -950,12 +982,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -975,7 +1004,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1003,6 +1031,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1018,12 +1047,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1042,6 +1074,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -1138,7 +1171,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1196,11 +1228,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1242,7 +1274,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1289,6 +1320,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1357,8 +1389,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1369,6 +1402,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1390,6 +1424,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1444,6 +1483,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1456,7 +1496,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1488,6 +1527,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1503,11 +1543,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1525,6 +1566,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1554,9 +1598,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1564,17 +1611,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1605,10 +1654,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1677,6 +1728,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index fb17de53cc0..8c8f660b4fc 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:50 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:07 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_MDS=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -411,13 +425,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -475,9 +496,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -515,6 +539,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -548,6 +573,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -567,6 +594,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -577,14 +605,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -594,6 +623,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -603,6 +633,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -610,7 +641,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +722,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -753,12 +784,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -790,6 +818,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -804,11 +833,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -906,7 +938,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -920,7 +951,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -988,8 +1019,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1000,6 +1032,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1021,6 +1054,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1064,6 +1102,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1076,7 +1115,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1106,6 +1144,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1119,11 +1158,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1145,13 +1186,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1180,10 +1232,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1252,6 +1306,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index a012ce23520..227dbba7679 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:52 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:08 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_RDB=y
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -413,13 +427,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -477,9 +499,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -501,6 +525,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -517,6 +542,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -551,6 +577,8 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -570,6 +598,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -580,14 +609,15 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -597,6 +627,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -606,6 +637,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -613,7 +645,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -691,6 +722,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -704,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -768,12 +801,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -792,7 +822,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -820,6 +849,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -835,12 +865,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -859,6 +892,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -955,7 +989,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1012,11 +1045,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1091,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1106,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1101,6 +1134,7 @@ CONFIG_MMC_SPI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1111,6 +1145,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1132,6 +1167,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1178,6 +1218,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1190,7 +1231,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1264,6 +1304,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1277,11 +1318,13 @@ CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1303,13 +1346,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1338,10 +1392,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1410,6 +1466,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 4bcc4a1ff30..24ee7fcac87 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:09 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -608,9 +629,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -633,6 +656,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -720,6 +744,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -755,6 +780,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -765,11 +791,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -779,6 +806,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -788,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -795,7 +824,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -853,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -865,6 +894,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -927,12 +957,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -951,7 +978,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1083,11 +1109,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1128,7 +1154,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1144,6 +1169,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1212,8 +1238,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1224,6 +1251,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1245,6 +1273,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1292,6 +1325,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1304,7 +1338,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1375,6 +1408,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1388,11 +1422,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1414,13 +1450,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1449,10 +1496,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1521,6 +1570,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 9ba5518ce8d..7f39543205a 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:10 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -560,9 +581,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -584,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -645,11 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -659,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -668,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -675,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -733,6 +761,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -745,6 +774,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -807,12 +837,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -831,7 +858,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -963,11 +989,11 @@ CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1008,7 +1034,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1023,6 +1048,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1091,8 +1117,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1103,6 +1130,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1124,6 +1152,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1171,6 +1204,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1183,7 +1217,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1254,6 +1287,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1267,11 +1301,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1293,13 +1329,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1328,10 +1375,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1400,6 +1449,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 18e4bc0b3c1..1cd1fcac22c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:11 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_MDS=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -443,6 +464,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -476,6 +498,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -513,6 +537,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -523,11 +548,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -537,6 +563,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -546,6 +573,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -553,7 +581,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -694,12 +721,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -731,6 +755,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -745,11 +770,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -847,7 +875,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -861,7 +888,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -929,8 +956,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -941,6 +969,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -962,6 +991,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1005,6 +1039,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1017,7 +1052,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1045,6 +1079,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1058,11 +1093,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1084,13 +1121,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1119,10 +1167,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1191,6 +1241,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 76db8138eac..ce5177393a0 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:58 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_MPC836x_MDS=y
 # CONFIG_ASP834x is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -271,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -293,7 +308,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -361,7 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -493,13 +506,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -557,9 +577,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -581,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -597,6 +620,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -630,6 +654,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -649,6 +675,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -659,14 +686,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -676,6 +704,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -685,6 +714,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -692,7 +722,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -774,6 +803,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -835,12 +865,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -872,6 +899,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -886,11 +914,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1019,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1032,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1070,8 +1100,9 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1082,6 +1113,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1103,6 +1135,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1147,6 +1184,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1159,7 +1197,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1189,6 +1226,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1202,11 +1240,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1228,13 +1268,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1263,10 +1314,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1335,6 +1388,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 0dc11c44306..7f1d1383a24 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:13 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_ASP834x is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -475,7 +489,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -506,13 +519,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +560,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -574,6 +596,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -584,14 +607,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -601,7 +625,6 @@ CONFIG_UCC_GETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -673,6 +696,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -686,6 +710,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -749,12 +774,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -774,7 +796,6 @@ CONFIG_SPI_MPC83xx=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -924,6 +945,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -956,7 +978,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -967,6 +988,7 @@ CONFIG_HID_COMPAT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -977,6 +999,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -998,6 +1021,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1052,6 +1080,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1064,7 +1093,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1095,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_UCC_SLOW=y
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1110,11 +1139,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1136,13 +1166,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1182,10 +1223,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1254,6 +1297,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index e42f6b3917d..bf636fd560a 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_MDS=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -474,9 +495,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -575,6 +599,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -608,6 +633,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -637,11 +665,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -651,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -660,6 +690,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -667,7 +698,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +841,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +875,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -862,11 +890,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -964,7 +995,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,7 +1008,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -994,6 +1024,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1004,6 +1035,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1025,6 +1057,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1068,6 +1105,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1080,7 +1118,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1112,6 +1149,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1125,11 +1163,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1149,13 +1189,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1184,10 +1235,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1256,6 +1309,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 408022f79a5..fe6454eacbd 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:14 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_RDB=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -357,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -406,13 +420,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -469,9 +490,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -494,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -563,7 +587,7 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -581,6 +605,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -614,6 +639,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -633,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -643,11 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -657,7 +686,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +839,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +873,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -862,11 +888,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -976,15 +1005,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1050,11 +1081,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1084,7 +1115,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1099,6 +1129,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1108,6 +1139,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1118,6 +1150,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1139,6 +1172,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1182,6 +1220,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1194,7 +1233,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1226,6 +1264,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1239,11 +1278,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1263,13 +1304,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1302,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1374,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index a0c42fb65cb..fe08f672cb2 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,18 +162,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_SBC834x=y
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -242,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -292,7 +307,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -348,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -360,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -408,13 +422,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -441,6 +462,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -474,6 +496,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +517,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -503,11 +528,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -517,7 +543,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -660,12 +685,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -697,6 +719,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -711,11 +734,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -813,7 +839,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -824,6 +849,7 @@ CONFIG_HID_COMPAT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -848,6 +874,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -891,6 +922,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -903,7 +935,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -919,6 +950,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -932,11 +964,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -956,13 +990,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -991,10 +1036,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1063,6 +1110,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 45f03cad8db..433c303eb82 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:36 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:58 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
@@ -58,6 +59,7 @@ CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +198,8 @@ CONFIG_PPC_MPC834x=y
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -251,9 +262,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +295,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +318,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -359,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -371,7 +386,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -485,7 +499,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -516,13 +529,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -580,9 +600,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -605,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -681,6 +704,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -714,6 +738,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -733,6 +759,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -743,14 +770,15 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -760,6 +788,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -769,6 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -776,7 +806,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -867,6 +896,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -932,12 +962,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -992,6 +1019,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1006,11 +1034,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1121,15 +1153,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1181,6 +1215,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
@@ -1195,11 +1230,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1229,7 +1264,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1245,6 +1279,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1254,6 +1289,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1264,6 +1300,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1285,6 +1322,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1329,6 +1371,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1341,7 +1384,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1375,6 +1417,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1388,11 +1431,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1412,13 +1457,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1448,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1520,6 +1578,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
-- 
cgit v1.2.3


From 0ae0e7edf8c93c399b37d41e647ecc9ed13f0b9c Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:24:50 -0500
Subject: powerpc/85xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/85xx/ksi8560_defconfig     |  86 ++++--
 arch/powerpc/configs/85xx/mpc8540_ads_defconfig |  82 +++--
 arch/powerpc/configs/85xx/mpc8560_ads_defconfig |  89 ++++--
 arch/powerpc/configs/85xx/mpc85xx_cds_defconfig |  88 ++++--
 arch/powerpc/configs/85xx/sbc8548_defconfig     |  84 ++++--
 arch/powerpc/configs/85xx/sbc8560_defconfig     |  83 +++--
 arch/powerpc/configs/85xx/socrates_defconfig    | 385 ++++++++++++++++++------
 arch/powerpc/configs/85xx/stx_gp3_defconfig     | 105 +++++--
 arch/powerpc/configs/85xx/tqm8540_defconfig     | 100 ++++--
 arch/powerpc/configs/85xx/tqm8541_defconfig     | 101 +++++--
 arch/powerpc/configs/85xx/tqm8548_defconfig     |  64 +++-
 arch/powerpc/configs/85xx/tqm8555_defconfig     | 101 +++++--
 arch/powerpc/configs/85xx/tqm8560_defconfig     | 101 +++++--
 13 files changed, 1118 insertions(+), 351 deletions(-)

diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 6479bb9f3f5..09146ddaa3c 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:16 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -86,21 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -127,7 +144,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,11 +159,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -163,6 +174,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -444,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -467,9 +481,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -502,6 +520,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +550,8 @@ CONFIG_MDIO_BITBANG=y
 # CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -544,6 +565,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -552,7 +574,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -624,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -663,6 +685,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -726,7 +749,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -739,7 +761,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -753,6 +775,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -763,6 +786,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -785,6 +809,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -829,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -838,7 +868,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -866,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -879,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -901,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -931,9 +966,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -941,17 +979,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1045,6 +1086,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 905e8a3388d..7b43be7586b 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,16 +126,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -129,7 +146,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,11 +161,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -165,6 +176,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -233,9 +245,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,17 +281,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -344,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -387,9 +402,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -404,6 +423,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -432,6 +452,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -441,6 +463,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -449,7 +472,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -607,7 +629,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -620,7 +641,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -634,6 +655,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -644,6 +666,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -665,6 +688,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -708,6 +736,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -717,7 +746,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -745,6 +773,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -758,11 +787,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -780,6 +811,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -809,9 +843,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -819,17 +856,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -922,6 +961,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 095e2ded6e8..62adb71a5d4 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:09 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,6 +141,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,11 +164,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -168,6 +179,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -236,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +279,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -277,17 +293,17 @@ CONFIG_PCI_DEBUG=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -343,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -405,12 +421,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -437,6 +457,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -470,6 +491,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +516,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -503,10 +527,12 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -516,6 +542,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -525,6 +552,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -532,7 +560,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +635,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -651,6 +679,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -719,7 +748,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -733,7 +761,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -749,6 +777,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -759,6 +788,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -780,6 +810,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -823,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -832,7 +868,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -860,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -873,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -895,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -924,9 +965,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -934,17 +978,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1037,6 +1083,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index f95961c04a2..41209e3a654 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:18 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,16 +127,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -234,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,17 +291,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -341,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -402,18 +418,23 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -488,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -521,6 +543,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -540,6 +564,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -550,10 +575,12 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -563,6 +590,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -572,6 +600,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -579,7 +608,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -750,7 +778,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -764,7 +791,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -780,6 +807,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -790,6 +818,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -811,6 +840,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -854,6 +888,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -863,7 +898,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -891,6 +925,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -904,11 +939,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -926,6 +963,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -955,9 +995,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -965,17 +1008,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1068,6 +1113,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index e68e80987aa..6c36c9c7abf 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:15 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:19 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -271,17 +287,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -337,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,7 +366,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -396,12 +412,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -428,6 +448,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -461,6 +482,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -480,6 +503,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -490,10 +514,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -503,6 +529,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -512,6 +539,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -519,7 +547,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +719,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -716,6 +744,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -759,6 +792,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -768,7 +802,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -784,6 +817,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,11 +831,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -821,13 +857,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -918,6 +965,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index b1c766ef7e2..4aaf1a6bdc7 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -385,9 +400,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -402,6 +421,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,8 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -439,6 +461,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_NETDEV_10000=y
 
@@ -447,7 +470,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -603,7 +625,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -616,7 +637,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -665,8 +686,9 @@ CONFIG_RTC_DRV_M48T59=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -691,6 +713,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -734,6 +761,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -743,7 +771,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -771,6 +798,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -784,11 +812,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -806,6 +836,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -834,9 +867,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -844,17 +880,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -958,6 +996,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 0cc9048290a..79984589db6 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-# Sat Oct 18 11:06:13 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:21 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,15 +15,19 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -33,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -43,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -54,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,54 +77,70 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -126,12 +148,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,13 +165,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -160,12 +178,14 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_SOCRATES=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -181,14 +201,16 @@ CONFIG_MPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -202,6 +224,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
@@ -216,17 +240,24 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,6 +269,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -245,6 +277,8 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,15 +290,12 @@ CONFIG_PCI_LEGACY=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -315,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -324,7 +356,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,27 +373,17 @@ CONFIG_CAN_BCM=y
 # CAN Device Drivers
 #
 # CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_OLD_DRIVERS is not set
-# CONFIG_CAN_SLCAN is not set
-CONFIG_CAN_SJA1000=y
-CONFIG_CAN_SJA1000_MEM_OF=y
-# CONFIG_CAN_EMS_PCI is not set
-# CONFIG_CAN_IXXAT_PCI is not set
-# CONFIG_CAN_PEAK_PCI is not set
-# CONFIG_CAN_KVASER_PCI is not set
-# CONFIG_CAN_MSCAN is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -378,6 +402,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -458,15 +483,22 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
 CONFIG_MTD_NAND_SOCRATES=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -486,12 +518,24 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -533,6 +577,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -549,7 +595,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -572,6 +618,9 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -581,22 +630,28 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -607,10 +662,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -619,7 +677,10 @@ CONFIG_GFAR_NAPI=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -668,17 +729,23 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_TSC2003=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -691,6 +758,7 @@ CONFIG_TOUCHSCREEN_TSC2003=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -715,16 +783,20 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -734,44 +806,62 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -785,33 +875,38 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_SOCRATES=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -827,10 +922,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -849,22 +949,31 @@ CONFIG_SENSORS_W83781D=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -893,6 +1002,7 @@ CONFIG_DAB=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -914,10 +1024,6 @@ CONFIG_FB_BOTH_ENDIAN=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_MB862XX=y
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-CONFIG_FB_MB862XX_LIME=y
-# CONFIG_FB_PRE_INIT_FB is not set
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -936,6 +1042,7 @@ CONFIG_FB_MB862XX_LIME=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -944,9 +1051,16 @@ CONFIG_FB_MB862XX_LIME=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -974,10 +1088,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -988,9 +1098,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1008,6 +1145,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1018,6 +1158,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1031,6 +1172,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1038,20 +1181,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1067,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1080,7 +1222,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1088,7 +1230,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1098,7 +1239,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1135,33 +1283,42 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
-CONFIG_RTC_DRV_RX8025=y
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_PPC=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1170,17 +1327,20 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1189,6 +1349,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1208,15 +1373,13 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1236,25 +1399,27 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1286,25 +1451,28 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1321,7 +1489,32 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1330,13 +1523,16 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1374,6 +1570,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1403,8 +1603,15 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index eb4ba7a5f41..bd1bfcddbd0 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +154,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,11 +169,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -173,6 +184,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
@@ -241,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,17 +298,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +369,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -389,6 +406,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_LOG is not set
 # CONFIG_IP_NF_TARGET_ULOG is not set
 # CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
 # CONFIG_IP_NF_RAW is not set
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
@@ -406,6 +424,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -418,7 +437,6 @@ CONFIG_NET_PKTGEN=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -476,13 +494,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -591,9 +616,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -617,6 +644,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -633,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -666,6 +695,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -687,6 +718,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -697,10 +729,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -710,6 +744,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -719,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -726,7 +762,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -778,7 +813,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -837,6 +871,7 @@ CONFIG_PRINTER=m
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -903,12 +938,9 @@ CONFIG_I2C_ALGOBIT=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -964,6 +996,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -978,11 +1011,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1075,7 +1112,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1089,7 +1125,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1116,6 +1152,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1137,6 +1174,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1186,6 +1228,7 @@ CONFIG_CRAMFS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1197,7 +1240,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1253,6 +1295,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1266,12 +1309,13 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1289,6 +1333,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1319,9 +1366,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1329,17 +1379,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1433,6 +1485,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index f4379b1cf84..767600145fb 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:19 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,19 +100,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
@@ -232,9 +244,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -270,17 +286,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -348,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -448,7 +464,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -477,19 +492,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -564,6 +587,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -597,6 +621,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -634,6 +660,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -644,10 +671,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -657,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -666,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -673,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -754,6 +784,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -816,12 +847,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -853,6 +881,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -867,11 +896,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -955,7 +987,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -969,7 +1000,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -985,6 +1016,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -995,6 +1027,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1016,6 +1049,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1070,6 +1108,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1079,7 +1118,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1107,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1122,11 +1161,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1148,13 +1188,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1245,6 +1296,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index b8669231c1f..52fafc006dd 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 43030fea2ee..8b4faae7a9a 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Mon Mar 16 09:03:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -59,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -99,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -123,10 +127,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -134,6 +140,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -146,7 +153,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +183,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -246,6 +253,8 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -302,7 +312,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -358,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -370,7 +380,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -514,6 +523,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -548,6 +558,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -581,6 +592,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -600,6 +613,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -610,6 +624,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -624,6 +639,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -633,6 +649,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -640,7 +657,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -785,7 +801,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -817,6 +832,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -831,11 +847,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -919,7 +938,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -982,8 +1000,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1008,6 +1027,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1062,6 +1086,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1071,7 +1096,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1099,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1114,11 +1139,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1136,6 +1162,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1166,10 +1195,12 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1177,17 +1208,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1281,6 +1314,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index d5a864d7446..170360934ce 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:21 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index a25009174f3..f41cc2444d4 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:22 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
-- 
cgit v1.2.3


From 08af66b137d9213dfc051a222144adceb41dee4b Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:26:51 -0500
Subject: powerpc/86xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/86xx/gef_ppc9a_defconfig    |  92 +++++++---
 arch/powerpc/configs/86xx/gef_sbc310_defconfig   |  92 +++++++---
 arch/powerpc/configs/86xx/gef_sbc610_defconfig   | 122 +++++++++----
 arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 100 ++++++++---
 arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 211 +++++++++--------------
 arch/powerpc/configs/86xx/sbc8641d_defconfig     | 114 ++++++++----
 arch/powerpc/configs/mpc86xx_defconfig           | 211 +++++++++--------------
 7 files changed, 556 insertions(+), 386 deletions(-)

diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index df2c1633779..b6a23af57f4 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Fri Mar 13 15:36:11 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:31 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -100,21 +103,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -123,10 +129,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -148,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -169,8 +177,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +195,7 @@ CONFIG_GEF_PPC9A=y
 # CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -250,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +314,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -383,9 +393,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -398,6 +410,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -456,11 +469,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -495,6 +508,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -545,7 +559,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -686,6 +699,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -751,9 +765,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -776,6 +792,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -852,6 +869,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -885,6 +903,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -904,6 +924,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -914,8 +935,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -929,7 +950,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1056,6 +1076,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1122,7 +1143,6 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1178,6 +1198,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1192,11 +1213,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1315,15 +1340,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1393,11 +1420,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1439,7 +1466,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1456,6 +1482,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1517,8 +1544,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1531,6 +1559,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1552,6 +1581,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1609,6 +1643,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1621,7 +1656,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1682,6 +1716,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1697,11 +1732,12 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1719,6 +1755,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1747,9 +1786,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1758,17 +1800,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1790,6 +1834,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1805,10 +1850,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1878,6 +1925,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index bd236b3d915..a66910e6334 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Jan 28 23:05:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:29 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -96,20 +99,23 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,10 +124,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,6 +138,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -143,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,8 +173,6 @@ CONFIG_PPC_MSI_BITMAP=y
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,9 +187,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
 CONFIG_GEF_SBC310=y
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +300,6 @@ CONFIG_PCI_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
@@ -298,7 +309,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -382,6 +392,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -394,7 +405,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
@@ -493,7 +503,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -529,6 +538,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -594,9 +604,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -619,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -641,6 +654,7 @@ CONFIG_SATA_SIL24=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -674,6 +688,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -693,6 +709,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -703,11 +720,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -717,7 +735,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -828,6 +845,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -894,7 +912,6 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -949,6 +966,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -963,11 +981,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1086,15 +1108,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1164,11 +1188,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1210,7 +1234,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1226,6 +1249,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1287,8 +1311,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1301,6 +1326,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1322,6 +1348,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1382,6 +1413,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1394,7 +1426,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1455,6 +1486,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1470,11 +1502,12 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1494,13 +1527,25 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1530,10 +1575,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1602,6 +1649,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 1ab5abae00a..c6a7fc82b69 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:30 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,10 +74,20 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,21 +103,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,10 +129,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -139,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,8 +191,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -244,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -298,7 +315,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -378,9 +394,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -393,6 +411,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -451,11 +470,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -490,6 +509,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -540,7 +560,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -651,7 +670,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -682,13 +700,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -746,9 +771,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -771,6 +798,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -847,6 +875,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -880,6 +909,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -899,6 +930,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -909,11 +941,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -923,7 +956,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1050,6 +1082,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1113,12 +1146,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 CONFIG_DS1682=y
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1174,6 +1204,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1188,11 +1219,15 @@ CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1311,15 +1346,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1389,11 +1426,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1435,7 +1472,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1452,6 +1488,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1513,8 +1550,9 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1527,6 +1565,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1548,6 +1587,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1595,6 +1639,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1607,7 +1652,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1668,6 +1712,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1681,13 +1726,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1705,6 +1751,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1733,9 +1782,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1744,17 +1796,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1776,6 +1830,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1791,10 +1846,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1864,6 +1921,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index bbdf4bfc432..cfd2efcc6bc 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +74,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -87,21 +98,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -176,9 +185,13 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8610=y
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -238,9 +251,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -291,7 +308,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -364,6 +380,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -376,7 +393,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -492,7 +508,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -521,13 +536,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -632,9 +654,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -657,6 +681,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -733,6 +758,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -747,6 +773,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 # CONFIG_TULIP is not set
@@ -774,7 +802,6 @@ CONFIG_ULI526X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -929,12 +956,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1049,6 +1073,7 @@ CONFIG_FB_FSL_DIU=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1069,6 +1094,7 @@ CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
@@ -1116,6 +1142,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1165,7 +1193,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1179,7 +1206,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1247,8 +1274,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1259,6 +1287,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1279,6 +1308,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1323,6 +1357,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1337,7 +1372,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1409,6 +1443,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1422,11 +1457,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1444,6 +1481,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1474,9 +1514,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1484,17 +1527,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1589,6 +1634,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 92acfdf3540..0bee3e30394 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,11 +72,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -90,22 +102,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +129,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -127,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -140,7 +157,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -182,8 +191,11 @@ CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -245,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +289,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -297,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -385,6 +400,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -397,7 +413,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -451,13 +466,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -516,9 +538,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -541,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -617,6 +642,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -650,6 +676,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -669,6 +697,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -679,11 +708,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -693,6 +723,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -702,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -709,7 +741,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -875,12 +906,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -933,7 +961,7 @@ CONFIG_VIDEO_MEDIA=m
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -942,6 +970,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -981,103 +1010,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1157,6 +1090,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1211,15 +1146,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1292,11 +1229,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1338,7 +1275,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1354,6 +1290,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1415,8 +1352,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1427,6 +1365,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1449,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1504,6 +1448,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1519,7 +1464,6 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1590,6 +1534,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1604,11 +1549,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1626,6 +1572,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1656,9 +1605,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1666,17 +1618,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1707,10 +1661,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1779,6 +1735,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 04797e730c5..c30a0c71587 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:23 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:27 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,10 +73,20 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -90,21 +102,24 @@ CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,10 +128,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -125,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -138,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,18 +171,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -180,8 +190,11 @@ CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
 # CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 # CONFIG_GEF_SBC610 is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -243,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +290,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -296,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -376,9 +392,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -391,6 +409,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -449,11 +468,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 # CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -488,6 +507,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -538,7 +558,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -649,7 +668,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -678,13 +696,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -729,6 +754,7 @@ CONFIG_DM_ZERO=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -762,6 +788,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +809,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -791,11 +820,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -805,7 +835,6 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -923,6 +952,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -985,12 +1015,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1022,6 +1049,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1036,11 +1064,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1145,7 +1176,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1159,7 +1189,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -1175,6 +1205,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1187,6 +1218,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1227,6 +1259,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1269,8 +1306,13 @@ CONFIG_MINIX_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1283,7 +1325,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1346,6 +1387,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1359,13 +1401,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1383,6 +1426,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1411,9 +1457,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1422,17 +1471,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1454,6 +1506,7 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1469,10 +1522,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1542,6 +1597,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index adc756e1f25..5bb1b8eb0b4 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,11 +73,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,22 +103,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -116,10 +130,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +144,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -141,7 +158,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,18 +173,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -183,9 +192,12 @@ CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 CONFIG_SBC8641D=y
 CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
 CONFIG_MPC8641=y
 CONFIG_MPC8610=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -247,9 +259,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -276,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -299,7 +315,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -387,6 +402,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -399,7 +415,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -454,13 +469,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -519,9 +541,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -544,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -620,6 +645,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -653,6 +679,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -672,6 +700,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -682,11 +711,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -696,6 +726,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -705,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -712,7 +744,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -879,12 +910,9 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -963,7 +991,7 @@ CONFIG_VIDEO_MEDIA=m
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -972,6 +1000,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -1011,103 +1040,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1187,6 +1120,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1241,15 +1176,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1322,11 +1259,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1368,7 +1305,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1385,6 +1321,7 @@ CONFIG_USB_STORAGE=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1446,8 +1383,9 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1458,6 +1396,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1480,6 +1419,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1535,6 +1479,7 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1550,7 +1495,6 @@ CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1621,6 +1565,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1635,11 +1580,12 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1657,6 +1603,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1687,9 +1636,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1697,17 +1649,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1738,10 +1692,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1810,6 +1766,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
-- 
cgit v1.2.3


From 25991b90d7087c9ced2a31cacae4cb4655348a41 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:28:42 -0500
Subject: powerpc/embedded6xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/c2k_defconfig          | 128 +++++++++++++++++++---------
 arch/powerpc/configs/ep8248e_defconfig      |  74 +++++++++++-----
 arch/powerpc/configs/linkstation_defconfig  |  96 ++++++++++++++++-----
 arch/powerpc/configs/mgcoge_defconfig       |  74 +++++++++++-----
 arch/powerpc/configs/mpc7448_hpc2_defconfig |  91 +++++++++++++++-----
 arch/powerpc/configs/mpc8272_ads_defconfig  |  77 ++++++++++++-----
 arch/powerpc/configs/pq2fads_defconfig      |  90 +++++++++++++------
 arch/powerpc/configs/prpmc2800_defconfig    | 120 +++++++++++++++++++-------
 arch/powerpc/configs/storcenter_defconfig   |  71 ++++++++++-----
 9 files changed, 600 insertions(+), 221 deletions(-)

diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 5103319a7f5..9ffa8de9280 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:51 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,12 +72,22 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -92,23 +104,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,6 +134,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -133,6 +150,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -145,7 +163,6 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -161,18 +178,11 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -192,6 +202,8 @@ CONFIG_EMBEDDED6xx=y
 # CONFIG_PPC_PRPMC2800 is not set
 CONFIG_PPC_C2K=y
 CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -268,9 +280,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -295,6 +310,7 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -315,15 +331,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -364,7 +376,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -403,9 +415,11 @@ CONFIG_BRIDGE_NETFILTER=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -419,6 +433,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -508,11 +523,11 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 # CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 # CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
 # CONFIG_IP6_NF_SECURITY is not set
 CONFIG_BRIDGE_NF_EBTABLES=m
@@ -544,6 +559,7 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
@@ -566,6 +582,7 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -612,6 +629,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -638,7 +656,6 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -748,7 +765,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -846,9 +862,11 @@ CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
 # CONFIG_MEGARAID_LEGACY is not set
 CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -875,6 +893,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -891,6 +910,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -924,6 +944,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -943,6 +965,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -957,6 +980,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -966,7 +990,6 @@ CONFIG_MV643XX_ETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1084,6 +1107,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=m
 CONFIG_GEN_RTC=m
 # CONFIG_GEN_RTC_X is not set
@@ -1150,12 +1174,9 @@ CONFIG_I2C_MV64XXX=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1187,6 +1208,7 @@ CONFIG_SENSORS_DS1621=m
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 CONFIG_SENSORS_GL518SM=m
 # CONFIG_SENSORS_GL520SM is not set
 CONFIG_SENSORS_IT87=m
@@ -1201,11 +1223,14 @@ CONFIG_SENSORS_LM87=m
 CONFIG_SENSORS_LM90=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 CONFIG_SENSORS_SMSC47M1=m
@@ -1363,21 +1388,21 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
 # CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
@@ -1402,7 +1427,7 @@ CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1438,12 +1463,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
 # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
@@ -1466,7 +1493,6 @@ CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1487,6 +1513,7 @@ CONFIG_USB_SPEEDTOUCH=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1516,6 +1543,7 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1524,6 +1552,7 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -1553,6 +1582,11 @@ CONFIG_QUOTACTL=y
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1612,6 +1646,7 @@ CONFIG_VXFS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1626,7 +1661,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1637,6 +1671,7 @@ CONFIG_CIFS=m
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1704,6 +1739,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1719,12 +1755,15 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_CHECK_SIGNATURE=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1742,6 +1781,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1775,12 +1817,15 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1788,18 +1833,21 @@ CONFIG_TRACING=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1830,6 +1878,7 @@ CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1845,10 +1894,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1918,6 +1969,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index add6419c15d..04915c3a43f 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -104,10 +114,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -115,6 +127,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -122,7 +135,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -137,18 +149,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -167,6 +172,8 @@ CONFIG_8272=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -222,9 +229,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -250,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,7 +283,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +363,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -364,7 +375,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -468,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -517,6 +526,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -550,6 +560,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -572,6 +584,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -581,8 +594,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -594,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -603,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -610,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -662,6 +676,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -751,8 +766,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -763,6 +780,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -780,6 +798,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -894,6 +916,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -907,11 +930,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -927,6 +950,7 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -955,9 +979,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -965,16 +992,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1005,9 +1034,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1071,6 +1102,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 15900dcf0bf..a4053ab9e24 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar  6 00:07:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:54 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +70,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -100,21 +103,24 @@ CONFIG_NAMESPACES=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -124,10 +130,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -147,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,8 +176,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -191,6 +197,8 @@ CONFIG_LINKSTATION=y
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -250,9 +258,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -277,6 +288,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -299,7 +311,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -371,6 +382,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -379,6 +391,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -389,6 +402,7 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -465,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -477,7 +492,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -625,6 +639,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -690,9 +705,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -715,6 +732,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -791,6 +809,7 @@ CONFIG_PATA_SIL680=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -805,6 +824,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 CONFIG_TULIP=y
@@ -833,6 +854,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -843,8 +865,8 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -858,6 +880,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -867,6 +890,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -874,7 +898,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -985,6 +1008,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -1050,7 +1074,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,6 +1105,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1096,11 +1120,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1195,7 +1222,6 @@ CONFIG_HID=m
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1250,11 +1276,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1290,7 +1316,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1314,11 +1340,13 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
@@ -1341,7 +1369,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1357,6 +1384,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1418,8 +1446,9 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1430,6 +1459,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1455,6 +1485,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1507,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1524,7 +1560,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1584,6 +1619,7 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1597,15 +1633,18 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1623,6 +1662,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1652,9 +1694,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1662,17 +1707,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1703,10 +1750,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1776,6 +1825,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index c58c38d5b7a..31e1df66515 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:30 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -57,6 +58,7 @@ CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -83,23 +94,25 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,10 +121,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,6 +134,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -126,7 +142,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -141,18 +156,11 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -171,7 +179,9 @@ CONFIG_8272=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
 CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -231,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -260,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,7 +296,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +369,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +477,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -517,6 +529,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -551,6 +564,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,7 +591,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -631,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -720,8 +735,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -732,6 +749,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -750,6 +768,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -872,6 +894,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -887,11 +910,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -907,6 +931,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -935,9 +960,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -945,16 +973,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -986,9 +1017,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 38712e861c4..642ab67c843 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:33 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:56 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -85,20 +96,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -125,7 +142,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,18 +157,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -172,6 +181,8 @@ CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_PRPMC2800 is not set
 # CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 CONFIG_MPIC_WEIRD=y
@@ -230,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +269,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -277,7 +292,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -333,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -345,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -392,12 +406,16 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -454,9 +472,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -479,6 +499,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -554,6 +575,7 @@ CONFIG_SATA_MV=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -587,6 +609,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +652,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -639,10 +664,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -652,6 +677,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -661,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -668,7 +695,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -839,7 +865,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -853,7 +878,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -869,6 +894,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -879,6 +905,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -901,6 +928,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -944,6 +976,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -953,7 +986,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -985,6 +1017,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -998,11 +1031,13 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1024,13 +1059,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1122,6 +1168,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index d85a43cb821..cb966ca2ce8 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:57 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,6 +128,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -123,7 +136,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -138,18 +150,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +174,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -225,9 +232,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -253,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,7 +286,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -356,6 +366,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -367,7 +378,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -472,7 +482,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -521,6 +530,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -554,6 +564,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,6 +588,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -585,8 +598,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -598,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -607,6 +621,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -614,7 +629,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -668,7 +682,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -719,6 +732,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -809,8 +823,10 @@ CONFIG_DAB=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -821,6 +837,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -841,6 +858,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -956,6 +977,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -971,11 +993,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -993,6 +1015,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1022,9 +1047,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1032,16 +1060,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1072,9 +1102,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1138,6 +1170,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index fdded96633a..129d80860f2 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:42 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:02 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,22 +92,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -106,10 +119,12 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,6 +132,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +140,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -139,18 +154,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +177,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -225,9 +235,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -254,6 +267,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -276,7 +290,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -357,6 +370,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -368,7 +382,6 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -473,7 +486,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,10 +510,14 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -573,6 +589,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -606,6 +623,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +647,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -637,8 +657,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -650,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -659,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -666,7 +688,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -720,7 +741,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -773,6 +793,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -868,7 +889,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
@@ -907,13 +928,16 @@ CONFIG_USB_ETH_RNDIS=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -924,6 +948,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -944,6 +969,10 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1059,6 +1088,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1074,11 +1104,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1096,6 +1127,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1125,9 +1159,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1135,16 +1172,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1175,9 +1214,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1241,6 +1282,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e971db17113..e9f287f313f 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:03 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,9 +72,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,22 +101,26 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -114,16 +130,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,7 +150,6 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,18 +165,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -178,6 +189,8 @@ CONFIG_EMBEDDED6xx=y
 CONFIG_PPC_PRPMC2800=y
 # CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -237,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,15 +296,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,7 +331,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,7 +369,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -459,7 +472,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -489,19 +501,27 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -605,9 +625,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -630,6 +652,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -707,6 +730,7 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -740,6 +764,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +807,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -795,6 +822,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -804,6 +832,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -813,6 +842,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -820,7 +850,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -975,12 +1004,9 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1012,6 +1038,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1026,11 +1053,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1127,15 +1157,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1202,11 +1234,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1236,7 +1268,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1252,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1313,8 +1345,9 @@ CONFIG_RTC_DRV_MAX6900=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1325,6 +1358,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1347,6 +1381,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1391,6 +1430,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1400,7 +1440,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1432,6 +1471,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1445,11 +1485,15 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1471,13 +1515,24 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1569,6 +1624,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 94903465ea1..bd4a8d435c5 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar  6 00:09:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:04 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -95,17 +97,17 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,16 +117,19 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +142,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,8 +162,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -181,6 +183,8 @@ CONFIG_STORCENTER=y
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -239,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -266,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +296,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=m
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +359,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -486,6 +493,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -500,6 +508,7 @@ CONFIG_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
@@ -604,9 +613,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -628,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -637,7 +649,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -655,6 +667,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -671,6 +684,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -681,8 +695,8 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -696,7 +710,6 @@ CONFIG_R8169=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -766,6 +779,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -831,7 +845,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -952,11 +965,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -997,7 +1010,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1013,6 +1025,7 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1074,8 +1087,9 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1086,6 +1100,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1112,6 +1127,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1166,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_EXPORTFS=m
 
@@ -1231,6 +1252,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1246,11 +1268,11 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1272,13 +1294,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
-- 
cgit v1.2.3


From 2e15eedffaae555085071c68cb94b9eeed2245be Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 17:29:08 -0500
Subject: powerpc/8xx: Update defconfigs

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/adder875_defconfig   | 65 ++++++++++++++++++--------
 arch/powerpc/configs/ep88xc_defconfig     | 63 +++++++++++++++++--------
 arch/powerpc/configs/mgsuvd_defconfig     | 72 +++++++++++++++++++++--------
 arch/powerpc/configs/mpc866_ads_defconfig | 77 ++++++++++++++++++++++---------
 arch/powerpc/configs/mpc885_ads_defconfig | 63 +++++++++++++++++--------
 5 files changed, 241 insertions(+), 99 deletions(-)

diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index aaab5cc3751..74f7f7c6fdc 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:50 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -53,6 +53,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_REDBOOT=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -70,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -85,19 +95,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -106,10 +116,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +129,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -139,11 +151,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -558,7 +566,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -606,6 +613,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -675,6 +683,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -698,6 +707,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -742,6 +756,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -753,7 +768,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -785,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -802,6 +817,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -819,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -845,9 +864,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -855,17 +877,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index b2fdfd9e183..c2a439595f4 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:53 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_LXT_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -562,6 +570,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -631,6 +640,7 @@ CONFIG_DAB=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -654,6 +664,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -698,6 +713,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -709,7 +725,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -758,6 +774,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -775,6 +792,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -801,9 +821,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -811,17 +834,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 297b5d5042b..24fa90792c5 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:32 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -82,20 +92,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -103,10 +116,12 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +129,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,7 +137,6 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -137,11 +152,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -232,9 +242,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +281,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -483,6 +492,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -511,6 +521,8 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -531,7 +543,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -582,6 +593,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -651,6 +663,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -663,6 +676,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -685,6 +699,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -739,6 +758,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -750,7 +770,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -782,6 +801,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,11 +817,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -819,13 +840,25 @@ CONFIG_DEBUG_FS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -917,6 +950,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 1793d08e9c0..3add6f62b21 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -83,18 +93,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -103,10 +113,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +126,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,7 +134,6 @@ CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -137,11 +149,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -232,9 +239,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +278,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,9 +386,13 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -396,6 +407,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -424,6 +436,8 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -437,6 +451,7 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
+# CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
@@ -445,7 +460,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -492,7 +506,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -540,6 +553,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -622,7 +636,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -635,7 +648,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -649,6 +662,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -661,6 +675,7 @@ CONFIG_EXT2_FS_XATTR=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -682,6 +697,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -725,6 +745,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -736,7 +757,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -768,6 +788,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -782,11 +803,11 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -806,13 +827,24 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -903,6 +935,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 4b76321c0ec..42e64ebc279 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:41 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:01 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -240,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -277,14 +287,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -335,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -347,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -450,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -474,6 +480,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +509,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -522,7 +531,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -573,6 +581,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -642,6 +651,7 @@ CONFIG_DAB=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -665,6 +675,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -709,6 +724,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -720,7 +736,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -752,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -769,6 +785,7 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -786,6 +803,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -812,9 +832,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -822,17 +845,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
-- 
cgit v1.2.3


From 1b1cc7f21c51cc81992a547b59e174dd8c44d1bd Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Wed, 13 May 2009 20:44:07 +0200
Subject: ALSA: riptide: postfix increment and off by one

With a postfix increment these variables are incremented beyond
CMDIF_TIMEOUT / MAX_WRITE_RETRY.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/riptide/riptide.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 6f1034417a0..e51a5ef1954 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -889,7 +889,7 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
 	spin_lock_irqsave(&cif->lock, irqflags);
 	while (i++ < CMDIF_TIMEOUT && !IS_READY(cif->hwport))
 		udelay(10);
-	if (i >= CMDIF_TIMEOUT) {
+	if (i > CMDIF_TIMEOUT) {
 		err = -EBUSY;
 		goto errout;
 	}
@@ -907,8 +907,10 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
 			WRITE_PORT_ULONG(cmdport->data1, cmd);	/* write cmd */
 			if ((flags & RESP) && ret) {
 				while (!IS_DATF(cmdport) &&
-				       time++ < CMDIF_TIMEOUT)
+				       time < CMDIF_TIMEOUT) {
 					udelay(10);
+					time++;
+				}
 				if (time < CMDIF_TIMEOUT) {	/* read response */
 					ret->retlongs[0] =
 					    READ_PORT_ULONG(cmdport->data1);
@@ -1454,7 +1456,7 @@ static int snd_riptide_trigger(struct snd_pcm_substream *substream, int cmd)
 			SEND_GPOS(cif, 0, data->id, &rptr);
 			udelay(1);
 		} while (i != rptr.retlongs[1] && j++ < MAX_WRITE_RETRY);
-		if (j >= MAX_WRITE_RETRY)
+		if (j > MAX_WRITE_RETRY)
 			snd_printk(KERN_ERR "Riptide: Could not stop stream!");
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -1783,7 +1785,7 @@ snd_riptide_codec_write(struct snd_ac97 *ac97, unsigned short reg,
 		SEND_SACR(cif, val, reg);
 		SEND_RACR(cif, reg, &rptr);
 	} while (rptr.retwords[1] != val && i++ < MAX_WRITE_RETRY);
-	if (i == MAX_WRITE_RETRY)
+	if (i > MAX_WRITE_RETRY)
 		snd_printdd("Write AC97 reg failed\n");
 }
 
-- 
cgit v1.2.3


From c34e6e8bdd99c746b7844c937c3a2529ef2c4437 Mon Sep 17 00:00:00 2001
From: "Kevin D. Kissell" <kevink@paralogos.com>
Date: Tue, 31 Mar 2009 12:59:24 +0200
Subject: MIPS: SMTC: Bring set/clear/change_c0_## return value semantics
 uptodate.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mipsregs.h | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 526f327475c..1f798779378 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1484,14 +1484,15 @@ static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res |= set;						\
-	write_c0_##name(res);					\
+	new = res | set;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1502,14 +1503,15 @@ static inline unsigned int					\
 clear_c0_##name(unsigned int clear)				\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~clear;						\
-	write_c0_##name(res);					\
+	new = res & ~clear;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1517,9 +1519,10 @@ clear_c0_##name(unsigned int clear)				\
 }								\
 								\
 static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int new)		\
+change_c0_##name(unsigned int change, unsigned int newbits)	\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
@@ -1527,9 +1530,9 @@ change_c0_##name(unsigned int change, unsigned int new)		\
 								\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~change;						\
-	res |= (new & change);					\
-	write_c0_##name(res);					\
+	new = res & ~change;					\
+	new |= (newbits & change);				\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
-- 
cgit v1.2.3


From bcf11801e77946533767bbb368130220e241d824 Mon Sep 17 00:00:00 2001
From: "Kevin D. Kissell" <kevink@paralogos.com>
Date: Tue, 31 Mar 2009 13:10:32 +0200
Subject: MIPS: SMTC: Fix xxx_clockevent_init() naming conflict for SMTC

Commit 779e7d41ad004946603da139da99ba775f74cb1c created a name collision
in SMTC builds.  The attached patch corrects this in a a
not-too-terribly-ugly manner.  Note that the SMTC case has to come
first, because CEVT_R4K will also be true.

Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/time.h | 6 +++++-
 arch/mips/kernel/cevt-smtc.c | 2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 38a30d2ee95..e46f23f54a5 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void);
 
 static inline int mips_clockevent_init(void)
 {
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern int smtc_clockevent_init(void);
+
+	return smtc_clockevent_init();
+#elif CONFIG_CEVT_R4K
 	return r4k_clockevent_init();
 #else
 	return -ENXIO;
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
index 6d45e24db5b..df6f5bc6057 100644
--- a/arch/mips/kernel/cevt-smtc.c
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 }
 
 
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();
-- 
cgit v1.2.3


From b7863ee144a99ff54fee90d851e24d73f38af661 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Tue, 31 Mar 2009 18:51:27 +0200
Subject: MIPS: Alchemy: Fix AU1100 interrupt numbers off-by-one

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/au1000.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 62f91f50b5b..87a16598ebc 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -715,7 +715,7 @@ enum soc_au1500_ints {
 #ifdef CONFIG_SOC_AU1100
 enum soc_au1100_ints {
 	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1100_UART0_INT,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
 	AU1100_UART1_INT,
 	AU1100_SD_INT,
 	AU1100_UART3_INT,
-- 
cgit v1.2.3


From d16797b304a4701a7d156f47773c6d2e456b64ee Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Tue, 31 Mar 2009 18:51:28 +0200
Subject: MIPS: Alchemy: Add missing Au1200 GPIO203 interrupt

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/au1000.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 87a16598ebc..854e95f1b07 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -902,8 +902,8 @@ enum soc_au1200_ints {
 	AU1000_RTC_MATCH0_INT,
 	AU1000_RTC_MATCH1_INT,
 	AU1000_RTC_MATCH2_INT,
-
-	AU1200_NAND_INT		= AU1200_FIRST_INT + 23,
+	AU1200_GPIO_203,
+	AU1200_NAND_INT,
 	AU1200_GPIO_204,
 	AU1200_GPIO_205,
 	AU1200_GPIO_206,
-- 
cgit v1.2.3


From 1d9c114dc1702306215439cd608047ab639700db Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Tue, 31 Mar 2009 18:44:36 +0200
Subject: MIPS: au1xxx-ide: Fix build with CONFIG_PM

au1xxx_power_dev_t? is never defined;  get rid of all PM stuff as well
since it is not in the driver source anyway.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/au1xxx_ide.h | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index 60638b8969b..5656c72de6d 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -46,20 +46,6 @@
 #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
 #endif
 
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
-	spinlock_t		lock;	/* Used to block on state transitions */
-	au1xxx_power_dev_t	*dev;	/* Power Managers device structure */
-	unsigned		stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
 typedef struct {
 	u32			tx_dev_id, rx_dev_id, target_dev_id;
 	u32			tx_chan, rx_chan;
@@ -72,9 +58,6 @@ typedef struct {
 #endif
 	int			irq;
 	u32			regbase;
-#ifdef CONFIG_PM
-	pm_state		pm;
-#endif
 } _auide_hwif;
 
 /******************************************************************************/
-- 
cgit v1.2.3


From 1291417eb61d1cd3fc69e295c2e9b83c5f6a8ff9 Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:23 +0300
Subject: MIPS: IP32: Two symbols can become static

The file arch/mips/mm/sc-rm7k.c needlessly defines two global symbols:

rm7k_sc_ops
rm7k_tcache_enabled

This patch makes these symbols static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/sc-rm7k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index e3abfb2d7e8..de69bfbf506 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size;
 
 #include <asm/r4kcache.h>
 
-int rm7k_tcache_enabled;
+static int rm7k_tcache_enabled;
 
 /*
  * Writeback and invalidate the primary cache dcache before DMA.
@@ -121,7 +121,7 @@ static void rm7k_sc_disable(void)
 	clear_c0_config(RM7K_CONF_SE);
 }
 
-struct bcache_ops rm7k_sc_ops = {
+static struct bcache_ops rm7k_sc_ops = {
 	.bc_enable = rm7k_sc_enable,
 	.bc_disable = rm7k_sc_disable,
 	.bc_wback_inv = rm7k_sc_wback_inv,
-- 
cgit v1.2.3


From 36a09d7848abf017ea11ea949372f46edc1350da Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:24 +0300
Subject: MIPS: IP32: ip32_be_handler symbol is needlessly defined global

The file arch/mips/sgi-ip32/ip32-berr.c needlessly defines the function
ip32_be_handler() as global, and this patch makes it static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip32/ip32-berr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c
index a278e918a01..afc1cadbba3 100644
--- a/arch/mips/sgi-ip32/ip32-berr.c
+++ b/arch/mips/sgi-ip32/ip32-berr.c
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/tlbdebug.h>
 
-int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	int data = regs->cp0_cause & 4;
 
-- 
cgit v1.2.3


From ae5373874a393d36d0fbc1a21c1b81e52736a4f2 Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:25 +0300
Subject: MIPS: IP32: Fix needlessly global symbols in
 arch/mips/sgi-ip32/ip32-irq.c

The following symbols are needlessly defined global: cpuerr_irq and
memerr_irq. This patch makes the symbols static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip32/ip32-irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 83a0b3c359d..5c2bf111ca6 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -112,13 +112,13 @@ static void inline flush_mace_bus(void)
 extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
 extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
 
-struct irqaction memerr_irq = {
+static struct irqaction memerr_irq = {
 	.handler = crime_memerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME memory error",
 };
 
-struct irqaction cpuerr_irq = {
+static struct irqaction cpuerr_irq = {
 	.handler = crime_cpuerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME CPU error",
-- 
cgit v1.2.3


From b6d57ae97af3c38d28f066b5e47b7d58e468728a Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Mon, 30 Mar 2009 22:53:26 +0300
Subject: MIPS: gbe: Make needlessly global symbols static in
 drivers/video/gbefb.c

The following symbols are needlessly defined global:

default_mode
default_var
gbe_mem_phys
gbe_turn_off
gbefb_exit
gbefb_init
gbefb_setup

This error was noticed by namespacecheck when compiling ip32_defconfig.

This patch makes the symbols static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 drivers/video/gbefb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index fe5b519860b..1a83709f961 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -75,7 +75,7 @@ struct gbefb_par {
 static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
 static void *gbe_mem;
 static dma_addr_t gbe_dma_addr;
-unsigned long gbe_mem_phys;
+static unsigned long gbe_mem_phys;
 
 static struct {
 	uint16_t *cpu;
@@ -185,8 +185,8 @@ static struct fb_videomode default_mode_LCD __initdata = {
 	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
-struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
 
 static int flat_panel_enabled = 0;
 
@@ -205,7 +205,7 @@ static void gbe_reset(void)
  *              console.
  */
 
-void gbe_turn_off(void)
+static void gbe_turn_off(void)
 {
 	int i;
 	unsigned int val, x, y, vpixen_off;
@@ -1097,7 +1097,7 @@ static void gbefb_create_sysfs(struct device *dev)
  * Initialization
  */
 
-int __init gbefb_setup(char *options)
+static int __init gbefb_setup(char *options)
 {
 	char *this_opt;
 
@@ -1283,7 +1283,7 @@ static struct platform_driver gbefb_driver = {
 
 static struct platform_device *gbefb_device;
 
-int __init gbefb_init(void)
+static int __init gbefb_init(void)
 {
 	int ret = platform_driver_register(&gbefb_driver);
 	if (!ret) {
@@ -1301,7 +1301,7 @@ int __init gbefb_init(void)
 	return ret;
 }
 
-void __exit gbefb_exit(void)
+static void __exit gbefb_exit(void)
 {
 	platform_device_unregister(gbefb_device);
 	platform_driver_unregister(&gbefb_driver);
-- 
cgit v1.2.3


From 7fc7316aa82fb3874f69689bd36134afea9c8bfd Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Wed, 1 Apr 2009 16:11:53 +0200
Subject: MIPS: Print the actual detected I-cache associativity on bootup.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/c-r4k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 58d9075e86f..171951d2305 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void)
 
 	printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
 	       icache_size >> 10,
-	       cpu_has_vtag_icache ? "VIVT" : "VIPT",
+	       c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
 	       way_string[c->icache.ways], c->icache.linesz);
 
 	printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",
-- 
cgit v1.2.3


From a575b8453944c5911a2a6f51d0096fffba82dd48 Mon Sep 17 00:00:00 2001
From: Zhang Le <r0bertz@gentoo.org>
Date: Thu, 2 Apr 2009 15:41:45 +0800
Subject: MIPS: Add Loongson cpu-feature-overrides.h

I have taken Wu Zhangjin's and Philippe Vachon's version as references,
did a little modification and tested on 16K page size kernel. It works
well.

Unfornately although it already has defined cpu_has_dc_aliases as 1, 4k
page size still not working.  More work needed here.

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 .../asm/mach-lemote/cpu-feature-overrides.h        | 59 ++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h

diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
new file mode 100644
index 00000000000..550a10dc9db
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * 	arch/mips/kernel/proc.c(show_cpuinfo),
+ *      loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	1
+#define cpu_has_divec		0
+#define cpu_has_dsp		0
+#define cpu_has_ejtag		0
+#define cpu_has_fpu		1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc 		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_mipsmt		0
+#define cpu_has_prefetch	0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_userlocal	0
+#define cpu_has_vce		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+#define cpu_icache_snoops_remote_store	1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
-- 
cgit v1.2.3


From 592e527f5b7c17e9be8fc58a63c3f918827b4b92 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 6 Apr 2009 00:31:22 +0200
Subject: MIPS: Fix build error if CONFIG_CEVT_R4K is undefined.

Introduced by 99aa5029937ee926e3b249369e208d7013cd381b.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/time.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index e46f23f54a5..df6a430de5e 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -61,7 +61,7 @@ static inline int mips_clockevent_init(void)
 	extern int smtc_clockevent_init(void);
 
 	return smtc_clockevent_init();
-#elif CONFIG_CEVT_R4K
+#elif defined(CONFIG_CEVT_R4K)
 	return r4k_clockevent_init();
 #else
 	return -ENXIO;
-- 
cgit v1.2.3


From c7d16736b8759f45a49d318bf3a8ca7fed7b6962 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 16 Apr 2009 09:20:17 -0700
Subject: MIPS: Compat: Use generic 32-bit wrapers for sys_timerfd_{g,s}ettime

The LTP timerfd01 test is failing (blocking forever) on the 32-bit ABIs. We
need to use the compat_* wrappers for these system calls.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/scall64-n32.S | 4 ++--
 arch/mips/kernel/scall64-o32.S | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index c2c16ef9218..93cc672f452 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -405,8 +405,8 @@ EXPORT(sysn32_call_table)
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime		/* 5285 */
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime	/* 5285 */
+	PTR	compat_sys_timerfd_settime
 	PTR	sys_signalfd4
 	PTR	sys_eventfd2
 	PTR	sys_epoll_create1
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 002fac27021..a5598b2339d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -525,8 +525,8 @@ sys_call_table:
 	PTR	sys_eventfd
 	PTR	sys32_fallocate			/* 4320 */
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime
+	PTR	compat_sys_timerfd_settime
 	PTR	compat_sys_signalfd4
 	PTR	sys_eventfd2			/* 4325 */
 	PTR	sys_epoll_create1
-- 
cgit v1.2.3


From dfe99b9c4ef62fa6ea20fa06b6f5c9819039c52d Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Thu, 16 Apr 2009 02:22:21 +0900
Subject: MIPS: RBTX4939: Fix typo in system name

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/rbtx4939/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 011e1e332f4..4199c6fd4d1 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void)
 }
 
 struct txx9_board_vec rbtx4939_vec __initdata = {
-	.system = "Tothiba RBTX4939",
+	.system = "Toshiba RBTX4939",
 	.prom_init = rbtx4939_prom_init,
 	.mem_setup = rbtx4939_setup,
 	.irq_setup = rbtx4939_irq_setup,
-- 
cgit v1.2.3


From 6cec2a0ac57d2ebef495a46d7866ae86e8d0e508 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 11 Apr 2009 23:31:50 +0900
Subject: MIPS: Do not include seccomp.h from compat.h

The compat.h does not need seccomp.h since TIF_32BIT was moved to
thread_info.h

This fixes a build error of 64-bit kernel without CONFIG_SECCOMP.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: : David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/compat.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 6c5b40905dd..f58aed354bf 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,7 +3,6 @@
 /*
  * Architecture specific compatibility types
  */
-#include <linux/seccomp.h>
 #include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>
-- 
cgit v1.2.3


From 5d57c31e5790d44905af0459a21086dbad167d26 Mon Sep 17 00:00:00 2001
From: Zhang Le <r0bertz@gentoo.org>
Date: Wed, 15 Apr 2009 17:01:52 +0800
Subject: MIPS: Loongson 2 needs no hazard barriers.

Quoting from Loongson2FUserGuide.pdf:

5.22.1 Hazards
The processor detects most of the pipeline hazards in hardware, including
CP0 hazards and load hazards. No NOP instructions are required to correct
instruction sequences.

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/hazards.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a12d971db4f..0eaf77ffbc4 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -138,8 +138,9 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-      defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
-- 
cgit v1.2.3


From 47740eb887796608fb4c629aa6b8507a2fb6c0eb Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sun, 19 Apr 2009 03:21:22 +0200
Subject: MIPS: Enable CLO / CLZ instructions via separate CPU property

This is useful for IDT RC32332, RC32334 and NEC VR5500 processors which do
not implement the full MIPS32 / MIPS64 architecture.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/bitops.h       | 4 ++--
 arch/mips/include/asm/cpu-features.h | 9 +++++++++
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index bac4a960b24..b1e9e97a9c7 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
 	int num;
 
 	if (BITS_PER_LONG == 32 &&
-	    __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__(
 		"	.set	push					\n"
 		"	.set	mips32					\n"
@@ -644,7 +644,7 @@ static inline int fls(int x)
 {
 	int r;
 
-	if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__("clz %0, %1" : "=r" (x) : "r" (x));
 
 		return 32 - x;
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index a0d14f85b78..c0047f86133 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -147,6 +147,15 @@
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.  For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz	cpu_has_mips_r
+# endif
+
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
 #endif
-- 
cgit v1.2.3


From 4f29c057aa81c5440f06b716f768ba9f8a041fe9 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Fri, 23 Jan 2009 00:42:11 +0900
Subject: MIPS: Synchronize dma_map_page and dma_map_single

Synchronize dma_map_page/dma_unmap_page and dma_map_single/dma_unmap_single.
This will reduce unnecessary writebacks and invalidates.

[Ralf: make dma_unmap_page an inline function.]

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/dma-mapping.h |  9 +++++++--
 arch/mips/mm/dma-default.c          | 19 +------------------
 2 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index c64afb40cd0..d16afddb09a 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	enum dma_data_direction direction);
 extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-	size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	int nhwentries, enum dma_data_direction direction);
 extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index bed56f1ac83..4fdb7f5216b 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 		unsigned long addr;
 
 		addr = (unsigned long) page_address(page) + offset;
-		dma_cache_wback_inv(addr, size);
+		__dma_sync(addr, size, direction);
 	}
 
 	return plat_map_dma_mem_page(dev, page) + offset;
@@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 EXPORT_SYMBOL(dma_map_page);
 
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
-		unsigned long addr;
-
-		addr = dma_addr_to_virt(dma_address);
-		dma_cache_wback_inv(addr, size);
-	}
-
-	plat_unmap_dma_mem(dev, dma_address);
-}
-
-EXPORT_SYMBOL(dma_unmap_page);
-
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	enum dma_data_direction direction)
 {
-- 
cgit v1.2.3


From 740ebe4a54fae1705705ec87ce511b16ffb50659 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Fri, 3 Apr 2009 01:01:21 +0900
Subject: MIPS: TXx9: Fix possible overflow in clock calculations

Addition of -fwrapv option in 2.6.29 discloses possible overflow with
signed arithmetics.  For example, result of "a * 6 / 12" (int a =
400000000) is 200000000 without -fwrapv but -157913941 with -fwrapv.

Change some variable to unsigned to avoid such overflows.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/setup_tx4927.c | 2 +-
 arch/mips/txx9/generic/setup_tx4938.c | 2 +-
 arch/mips/txx9/generic/setup_tx4939.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 914e93c6263..1093549df1a 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -88,7 +88,7 @@ void __init tx4927_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index f0844f891f0..3925219b897 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -93,7 +93,7 @@ void __init tx4938_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 7a25b573e9b..c2bf150c883 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -114,7 +114,7 @@ void __init tx4939_setup(void)
 	int i;
 	__u32 divmode;
 	__u64 pcfg;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 
 	txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
 			  TX4939_REG_SIZE);
-- 
cgit v1.2.3


From c52399bece85cd4b157dd772e9f20551f9f18d2f Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 2 Apr 2009 14:07:10 +0200
Subject: MIPS: Cavium: Add support for 8k and 32k page sizes.

Beyond the requirements of the architecture standard Cavium also supports
8k and 32k pages.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>
---
 arch/mips/Kconfig                   | 16 ++++++++++++----
 arch/mips/include/asm/mipsregs.h    | 11 +++++++++++
 arch/mips/include/asm/page.h        |  3 +++
 arch/mips/include/asm/pgtable-64.h  |  6 ++++++
 arch/mips/include/asm/thread_info.h |  3 +++
 arch/mips/lib/dump_tlb.c            |  9 +++++++++
 6 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 998e5db8cc0..023aa2d4650 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on EXPERIMENTAL && CPU_R8000
+	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
-	  only on the R8000 processor.  Not that at the time of this writing
-	  this option is still high experimental; there are also issues with
-	  compatibility of user applications.
+	  only on R8000 and cnMIPS processors.  Note that you will need a
+	  suitable Linux distribution to support this.
 
 config PAGE_SIZE_16KB
 	bool "16kB"
@@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB
 	  all non-R3000 family processors.  Note that you will need a suitable
 	  Linux distribution to support this.
 
+config PAGE_SIZE_32KB
+	bool "32kB"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Using 32kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available
+	  only on cnMIPS cores.  Note that you will need a suitable Linux
+	  distribution to support this.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
 	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 1f798779378..0ef30c81fea 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -184,12 +184,19 @@
 #else
 
 #define PM_4K		0x00000000
+#define PM_8K		0x00002000
 #define PM_16K		0x00006000
+#define PM_32K		0x0000e000
 #define PM_64K		0x0001e000
+#define PM_128K		0x0003e000
 #define PM_256K		0x0007e000
+#define PM_512K		0x000fe000
 #define PM_1M		0x001fe000
+#define PM_2M		0x003fe000
 #define PM_4M		0x007fe000
+#define PM_8M		0x00ffe000
 #define PM_16M		0x01ffe000
+#define PM_32M		0x03ffe000
 #define PM_64M		0x07ffe000
 #define PM_256M		0x1fffe000
 #define PM_1G		0x7fffe000
@@ -201,8 +208,12 @@
  */
 #ifdef CONFIG_PAGE_SIZE_4KB
 #define PM_DEFAULT_MASK	PM_4K
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define PM_DEFAULT_MASK	PM_8K
 #elif defined(CONFIG_PAGE_SIZE_16KB)
 #define PM_DEFAULT_MASK	PM_16K
+#elif defined(CONFIG_PAGE_SIZE_32KB)
+#define PM_DEFAULT_MASK	PM_32K
 #elif defined(CONFIG_PAGE_SIZE_64KB)
 #define PM_DEFAULT_MASK	PM_64K
 #else
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index fe7a88ea066..9f946e4ca05 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -23,6 +23,9 @@
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define PAGE_SHIFT	14
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT	15
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PAGE_SHIFT	16
 #endif
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 943515f0ef8..4ed9d1bba2b 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -83,6 +83,12 @@
 #define PMD_ORDER		0
 #define PTE_ORDER		0
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PGD_ORDER		0
 #define PUD_ORDER		aieeee_attempt_to_allocate_pud
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 676aa2ae191..143a48136a4 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define THREAD_SIZE_ORDER (0)
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define THREAD_SIZE_ORDER (0)
 #endif
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 779821cd54a..3f69725556a 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask)
 	case PM_16K:	return "16kb";
 	case PM_64K:	return "64kb";
 	case PM_256K:	return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case PM_8K:	return "8kb";
+	case PM_32K:	return "32kb";
+	case PM_128K:	return "128kb";
+	case PM_512K:	return "512kb";
+	case PM_2M:	return "2Mb";
+	case PM_8M:	return "8Mb";
+	case PM_32M:	return "32Mb";
+#endif
 #ifndef CONFIG_CPU_VR41XX
 	case PM_1M:	return "1Mb";
 	case PM_4M:	return "4Mb";
-- 
cgit v1.2.3


From 237e5a3443e5531336b880bbaf3e7bac110330f7 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 20 Apr 2009 13:43:05 +0200
Subject: MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 023aa2d4650..09b1287a92c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1966,10 +1966,6 @@ config SECCOMP
 
 endmenu
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
-- 
cgit v1.2.3


From ad058e95f943e26205aa916b83b85ccb21bd4812 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Wed, 22 Apr 2009 08:01:48 +0200
Subject: MIPS: Alchemy: Timer build fix

Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index f58d4ffb894..33fbae79af5 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -44,7 +44,7 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
 }
-- 
cgit v1.2.3


From 1699e5c9c414f0e3b393eb87c4acfc319fe7a1c4 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Tue, 21 Apr 2009 23:31:12 +0200
Subject: MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.h

There was already a define for NMI_OFFSET in asm/sn/addr.h, which now
clashes with linux/hardirq.h. Rename the one in sn/addr.h to fix IP27
builds..

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/sn/addrs.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index fec9bdd3491..3a56d90abfa 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -359,11 +359,11 @@
 	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
 #define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
 
-#define NMI_OFFSET(nasid, slice)					\
+#define SN_NMI_OFFSET(nasid, slice)					\
 	(KLD_NMI(nasid)->offset +					\
 	 KLD_NMI(nasid)->stride * (slice))
 #define NMI_ADDR(nasid, slice)						\
-	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+	TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
 #define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
 
 #define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
-- 
cgit v1.2.3


From d0aab922b19aaaef13c946236cc71ab9b7f895ee Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 27 Apr 2009 15:31:34 +0200
Subject: MIPS: Make access_ok() sideeffect proof.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/uaccess.h | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 09ff5bb1744..42b9cec2ee9 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -104,11 +104,21 @@
 
 #define __access_mask get_fs().seg
 
-#define __access_ok(addr, size, mask)					\
-	(((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+#define __access_ok(addr, size, mask)							\
+({											\
+	const volatile void __user *__up = addr;					\
+	unsigned long __addr = (unsigned long) __up;					\
+	unsigned long __size = size;							\
+	unsigned long __mask = mask;							\
+	unsigned long __ok;								\
+											\
+	__ok = (signed long)(__mask & (__addr | (__addr + __size) |			\
+		__ua_size(__size)));							\
+	__ok == 0;									\
+})
 
 #define access_ok(type, addr, size)					\
-	likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+	likely(__access_ok((addr), (size), __access_mask))
 
 /*
  * put_user: - Write a simple value into user space.
-- 
cgit v1.2.3


From ed01b3d240b76dc1b93d08833832f9ce51a11f02 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 27 Apr 2009 16:46:21 +0200
Subject: MIPS: Make uaccess.h slightly more sparse friendly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/uaccess.h | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 42b9cec2ee9..5c0876073f1 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -104,17 +104,17 @@
 
 #define __access_mask get_fs().seg
 
-#define __access_ok(addr, size, mask)							\
-({											\
-	const volatile void __user *__up = addr;					\
-	unsigned long __addr = (unsigned long) __up;					\
-	unsigned long __size = size;							\
-	unsigned long __mask = mask;							\
-	unsigned long __ok;								\
-											\
-	__ok = (signed long)(__mask & (__addr | (__addr + __size) |			\
-		__ua_size(__size)));							\
-	__ok == 0;									\
+#define __access_ok(addr, size, mask)					\
+({									\
+	unsigned long __addr = (unsigned long) (addr);			\
+	unsigned long __size = size;					\
+	unsigned long __mask = mask;					\
+	unsigned long __ok;						\
+									\
+	__chk_user_ptr(addr);						\
+	__ok = (signed long)(__mask & (__addr | (__addr + __size) |	\
+		__ua_size(__size)));					\
+	__ok == 0;							\
 })
 
 #define access_ok(type, addr, size)					\
@@ -235,6 +235,7 @@ do {									\
 ({									\
 	int __gu_err;							\
 									\
+	__chk_user_ptr(ptr);						\
 	__get_user_common((x), size, ptr);				\
 	__gu_err;							\
 })
@@ -315,6 +316,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val;					\
 	int __pu_err = 0;						\
 									\
+	__chk_user_ptr(ptr);						\
 	__pu_val = (x);							\
 	switch (size) {							\
 	case 1: __put_user_asm("sb", ptr); break;			\
@@ -882,7 +884,20 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_len;							\
 })
 
-#define __copy_in_user(to, from, n)	__copy_from_user(to, from, n)
+#define __copy_in_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	might_sleep();							\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
+	                                   __cu_len);			\
+	__cu_len;							\
+})
 
 #define copy_in_user(to, from, n)					\
 ({									\
-- 
cgit v1.2.3


From 01caec8396eff7d519e6d85c5a1c860e7d4714e5 Mon Sep 17 00:00:00 2001
From: Shane McDonald <mcdonald.shane@gmail.com>
Date: Mon, 27 Apr 2009 23:50:21 -0600
Subject: MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup

There have been a number of compile problems with the msp71xx configuration
ever since it was included in the linux-mips.org repository.  This patch
resolves the "multiple definition of plat_timer_setup" problem, and creates
the required get_c0_compare_int function.

This patch has been compile-tested against the current HEAD.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/msp71xx/msp_time.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c
index 7cfeda5a651..cca64e15f57 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_time.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c
@@ -81,10 +81,7 @@ void __init plat_time_init(void)
 	mips_hpt_frequency = cpu_rate/2;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
 {
-#ifdef CONFIG_IRQ_MSP_CIC
-	/* we are using the vpe0 counter for timer interrupts */
-	setup_irq(MSP_INT_VPE0_TIMER, irq);
-#endif
+	return MSP_INT_VPE0_TIMER;
 }
-- 
cgit v1.2.3


From 005076a16bd4c5ea60905ff475e8af57d60578f1 Mon Sep 17 00:00:00 2001
From: Shane McDonald <mcdonald.shane@gmail.com>
Date: Mon, 27 Apr 2009 23:52:25 -0600
Subject: MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx
 reset

There have been a number of compile problems with the msp71xx configuration
ever since it was included in the linux-mips.org repository.  This patch
resolves compilation problems with attempting to reset the board using
non-existent GPIO routines.

This patch has been compile-tested against the current HEAD.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/msp71xx/msp_setup.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index c93675615f5..a54e85b3cf2 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -21,7 +21,6 @@
 
 #if defined(CONFIG_PMC_MSP7120_GW)
 #include <msp_regops.h>
-#include <msp_gpio.h>
 #define MSP_BOARD_RESET_GPIO	9
 #endif
 
@@ -88,11 +87,8 @@ void msp7120_reset(void)
 	 * as GPIO char driver may not be enabled and it would look up
 	 * data inRAM!
 	 */
-	set_value_reg32(GPIO_CFG3_REG,
-			basic_mode_mask(MSP_BOARD_RESET_GPIO),
-			basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO));
-	set_reg32(GPIO_DATA3_REG,
-			basic_data_mask(MSP_BOARD_RESET_GPIO));
+	set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+	set_reg32(GPIO_DATA3_REG, 8);
 
 	/*
 	 * In case GPIO9 doesn't reset the board (jumper configurable!)
-- 
cgit v1.2.3


From ef41f4600f05a4e973c3ac72869c18269567b319 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 14:17:54 +0200
Subject: MIPS: uaccess: Switch lock annotations to might_fault().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/checksum.h |  4 ++--
 arch/mips/include/asm/uaccess.h  | 37 +++++++++++++++++++++----------------
 2 files changed, 23 insertions(+), 18 deletions(-)

diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
index 290485ac540..f2f7c6c264d 100644
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -40,7 +40,7 @@ static inline
 __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 				   __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	return __csum_partial_copy_user((__force void *)src, dst,
 					len, sum, err_ptr);
 }
@@ -53,7 +53,7 @@ static inline
 __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
 			     __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, dst, len))
 		return __csum_partial_copy_user(src, (__force void *)dst,
 						len, sum, err_ptr);
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 5c0876073f1..8de858f5449 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -245,6 +245,7 @@ do {									\
 	int __gu_err = -EFAULT;						\
 	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
 		__get_user_common((x), size, __gu_ptr);			\
 									\
@@ -334,6 +335,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	int __pu_err = -EFAULT;						\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
 		switch (size) {						\
 		case 1: __put_user_asm("sb", __pu_addr); break;		\
@@ -708,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
 	__cu_len;							\
 })
@@ -764,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len))			\
+	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
 		                                 __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -843,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
 	                                   __cu_len);			\
 	__cu_len;							\
@@ -874,13 +877,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_READ, __cu_from, __cu_len))		\
+	if (access_ok(VERIFY_READ, __cu_from, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -890,10 +894,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
 	                                   __cu_len);			\
 	__cu_len;							\
@@ -905,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
 	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
-	           access_ok(VERIFY_WRITE, __cu_to, __cu_len)))		\
+	           access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {	\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -932,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
 {
 	__kernel_size_t res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, $0\n\t"
@@ -981,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1018,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1037,7 +1042,7 @@ static inline long __strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_nocheck_asm)
@@ -1067,7 +1072,7 @@ static inline long strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_asm)
@@ -1084,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1115,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
-- 
cgit v1.2.3


From 165533c3bd750042e7e140dff5bc2406a5104efe Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 17:31:50 +0200
Subject: MIPS: IP27: Get rid of #ident.  Gcc 4.4.0 doesn't like it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/sn/nmi.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
index 6b7b0b5f372..1af49897d4e 100644
--- a/arch/mips/include/asm/sn/nmi.h
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -3,13 +3,13 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
  * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
  */
 #ifndef __ASM_SN_NMI_H
 #define __ASM_SN_NMI_H
 
-#ident "$Revision: 1.5 $"
-
 #include <asm/sn/addrs.h>
 
 /*
-- 
cgit v1.2.3


From 05e41404470662a17699af9e6d91fc80ed91e757 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 19:38:35 +0200
Subject: MIPS: Set compiler options only after the compiler prefix has ben
 set.

Otherwise indigestable options might be passed to the host compiler.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 8d544c7c9fe..3d5626ee0a5 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -14,8 +14,6 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y := -ffunction-sections
-
 #
 # Select the object file format to substitute into the linker script.
 #
@@ -50,6 +48,8 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+cflags-y := -ffunction-sections
+
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
 vmlinux-32		= vmlinux
-- 
cgit v1.2.3


From 1a4ba061b3c93804027b4cc4c588cfad748d9fc2 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 28 Apr 2009 19:28:33 +0200
Subject: MIPS: Use -mno-check-zero-division

I don't think that in 15 years of Linux/MIPS the zero division checking
code generated by gcc by default has ever caught anything.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 3d5626ee0a5..26947ab8526 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -49,6 +49,7 @@ ifneq ($(SUBARCH),$(ARCH))
 endif
 
 cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
 
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
-- 
cgit v1.2.3


From 5c5dd1d29120affb127955277bfba9f60e27a3fe Mon Sep 17 00:00:00 2001
From: Shane McDonald <mcdonald.shane@gmail.com>
Date: Tue, 28 Apr 2009 17:00:27 -0600
Subject: MIPS: MSP71xx: Remove the RAMROOT functions

The RAMROOT function was a successful but non-portable attempt to append
the root filesystem to the end of the kernel image.  The preferred and
portable solution is to use an initramfs instead.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/Kconfig            | 12 -------
 arch/mips/pmc-sierra/msp71xx/msp_prom.c | 60 +--------------------------------
 2 files changed, 1 insertion(+), 71 deletions(-)

diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index 90261b83db0..c139988bb85 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA
 
 endchoice
 
-menu "Options for PMC-Sierra MSP chipsets"
-	depends on PMC_MSP
-
-config PMC_MSP_EMBEDDED_ROOTFS
-	bool "Root filesystem embedded in kernel image"
-	select MTD
-	select MTD_BLOCK
-	select MTD_PMC_MSP_RAMROOT
-	select MTD_RAM
-
-endmenu
-
 config HYPERTRANSPORT
 	bool "Hypertransport Support for PMC-Sierra Yosemite"
 	depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
index e5bd5481d8d..c317a3623ce 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
@@ -40,12 +40,6 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
-#ifdef CONFIG_CRAMFS
-#include <linux/cramfs_fs.h>
-#endif
-#ifdef CONFIG_SQUASHFS
-#include <linux/squashfs_fs.h>
-#endif
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	char		*str;
 	unsigned int	memsize;
 	unsigned int	heaptop;
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	void		*ramroot_start;
-	unsigned long	ramroot_size;
-#endif
 	int i;
 
 	str = prom_getenv(memsz_env);
@@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	i++;			/* 3 */
 	mdesc[i].type = BOOT_MEM_RESERVED;
 	mdesc[i].base = CPHYSADDR((u32)_text);
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	if (get_ramroot(&ramroot_start, &ramroot_size)) {
-		/*
-		 * Rootfs in RAM -- follows kernel
-		 * Combine rootfs image with kernel block so a
-		 * page (4k) isn't wasted between memory blocks
-		 */
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)ramroot_start + ramroot_size)) - mdesc[i].base;
-	} else
-#endif
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)_end)) - mdesc[i].base;
+	mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
 
 	/* Remainder of RAM -- under memsize */
 	i++;			/* 5 */
@@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 
 	return &mdesc[0];
 }
-
-/* rootfs functions */
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-bool get_ramroot(void **start, unsigned long *size)
-{
-	extern char _end[];
-
-	/* Check for start following the end of the kernel */
-	void *check_start = (void *)_end;
-
-	/* Check for supported rootfs types */
-#ifdef CONFIG_CRAMFS
-	if (*(__u32 *)check_start == CRAMFS_MAGIC) {
-		/* Get CRAMFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct cramfs_super *)
-				   check_start)->size);
-
-		return true;
-	}
-#endif
-#ifdef CONFIG_SQUASHFS
-	if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) {
-		/* Get SQUASHFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct squashfs_super_block *)
-				   check_start)->bytes_used);
-
-		return true;
-	}
-#endif
-
-	return false;
-}
-EXPORT_SYMBOL(get_ramroot);
-#endif
-- 
cgit v1.2.3


From 0b54352600b820a6d25f151cbd8975ed9b2aeb09 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 30 Apr 2009 02:16:19 +0200
Subject: MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware.

Probably nobody does arithmetic on cp0 register values so this has never
bitten.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mipsregs.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 0ef30c81fea..32ef8bec5c8 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -728,8 +728,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source "\n\t"			\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	else								\
@@ -737,8 +737,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source ", " #sel "\n\t"		\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	local_irq_restore(__flags);					\
-- 
cgit v1.2.3


From bb86bf28aec6d0a207ae09f38a43e94133d4d6db Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 25 Apr 2009 11:25:34 +0200
Subject: MIPS: Fix highmem.

Commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) rsp.
b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (linux-mips.org):

> From: Chris Dearman <chris@mips.com>
> Date: Wed, 19 Sep 2007 00:58:24 +0100
> Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time.
>
> Slightly tacky, but there is a precedent in the sparc archirecture code.

introduces the variable _page_cachable_default, which defaults to zero and.
is used to create the prototype PTE for __kmap_atomic in
arch/mips/mm/init.c:kmap_init before initialization in
arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be
used as the CCA of kmap atomic pages which on many processors is not a
defined CCA value and may result in writes to kmap_atomic pages getting
corrupted.  Debugged by Jon Fraser (jfraser@broadcom.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/fixmap.h  |  3 +++
 arch/mips/include/asm/highmem.h |  6 ++++--
 arch/mips/mm/highmem.c          | 25 +++++++++++++++++++------
 arch/mips/mm/init.c             | 26 --------------------------
 4 files changed, 26 insertions(+), 34 deletions(-)

diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 9cc8522a394..0f5caa1307f 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	return __virt_to_fix(vaddr);
 }
 
+#define kmap_get_fixmap_pte(vaddr)					\
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
 /*
  * Called from pgtable_init()
  */
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 4374ab2adc7..25adfb02923 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -30,8 +30,6 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 4481656d106..2b1309b2580 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,7 +1,12 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
+static pte_t *kmap_pte;
+
+unsigned long highstart_pfn, highend_pfn;
+
 void *__kmap(struct page *page)
 {
 	void *addr;
@@ -14,6 +19,7 @@ void *__kmap(struct page *page)
 
 	return addr;
 }
+EXPORT_SYMBOL(__kmap);
 
 void __kunmap(struct page *page)
 {
@@ -22,6 +28,7 @@ void __kunmap(struct page *page)
 		return;
 	kunmap_high(page);
 }
+EXPORT_SYMBOL(__kunmap);
 
 /*
  * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
@@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
 	local_flush_tlb_one((unsigned long)vaddr);
 
 	return (void*) vaddr;
 }
+EXPORT_SYMBOL(__kmap_atomic);
 
 void __kunmap_atomic(void *kvaddr, enum km_type type)
 {
@@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 
 	pagefault_enable();
 }
+EXPORT_SYMBOL(__kunmap_atomic);
 
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
@@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 	debug_kmap_atomic(type);
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL));
 	flush_tlb_one(vaddr);
 
 	return (void*) vaddr;
@@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr)
 	return pte_page(*pte);
 }
 
-EXPORT_SYMBOL(__kmap);
-EXPORT_SYMBOL(__kunmap);
-EXPORT_SYMBOL(__kmap_atomic);
-EXPORT_SYMBOL(__kunmap_atomic);
+void __init kmap_init(void)
+{
+	unsigned long kmap_vstart;
+
+	/* cache the first kmap pte */
+	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index d9348946a19..c5511294a9e 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void)
 	return 1UL << order;
 }
 
-/*
- * These are almost like kmap_atomic / kunmap_atmic except they take an
- * additional address argument as the hint.
- */
-
-#define kmap_get_fixmap_pte(vaddr)					\
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
 #ifdef CONFIG_MIPS_MT_SMTC
 static pte_t *kmap_coherent_pte;
 static void __init kmap_coherent_init(void)
@@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma,
 	}
 }
 
-#ifdef CONFIG_HIGHMEM
-unsigned long highstart_pfn, highend_pfn;
-
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-static void __init kmap_init(void)
-{
-	unsigned long kmap_vstart;
-
-	/* cache the first kmap pte */
-	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
-	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
-	kmap_prot = PAGE_KERNEL;
-}
-#endif /* CONFIG_HIGHMEM */
-
 void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
 {
-- 
cgit v1.2.3


From c21004cd5b4cb7d479514d470a62366e8307412c Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 30 Apr 2009 18:14:56 +0200
Subject: MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.

The inline assembler used on 32-bit kernels was using the "h" constraint
which was considered dangerous and removed for gcc 4.4.0.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/div64.h | 142 +++++++++++++++---------------------------
 1 file changed, 50 insertions(+), 92 deletions(-)

diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
index d1d699105c1..dc5ea573644 100644
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -6,105 +6,63 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
 
-#include <linux/types.h>
+#include <asm-generic/div64.h>
 
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
 
-#include <asm/compiler.h>
+#include <linux/types.h>
 
 /*
  * No traps on overflows for any of these...
  */
 
-#define do_div64_32(res, high, low, base) ({ \
-	unsigned long __quot32, __mod32; \
-	unsigned long __cf, __tmp, __tmp2, __i; \
-	\
-	__asm__(".set	push\n\t" \
-		".set	noat\n\t" \
-		".set	noreorder\n\t" \
-		"move	%2, $0\n\t" \
-		"move	%3, $0\n\t" \
-		"b	1f\n\t" \
-		" li	%4, 0x21\n" \
-		"0:\n\t" \
-		"sll	$1, %0, 0x1\n\t" \
-		"srl	%3, %0, 0x1f\n\t" \
-		"or	%0, $1, %5\n\t" \
-		"sll	%1, %1, 0x1\n\t" \
-		"sll	%2, %2, 0x1\n" \
-		"1:\n\t" \
-		"bnez	%3, 2f\n\t" \
-		" sltu	%5, %0, %z6\n\t" \
-		"bnez	%5, 3f\n" \
-		"2:\n\t" \
-		" addiu	%4, %4, -1\n\t" \
-		"subu	%0, %0, %z6\n\t" \
-		"addiu	%2, %2, 1\n" \
-		"3:\n\t" \
-		"bnez	%4, 0b\n\t" \
-		" srl	%5, %1, 0x1f\n\t" \
-		".set	pop" \
-		: "=&r" (__mod32), "=&r" (__tmp), \
-		  "=&r" (__quot32), "=&r" (__cf), \
-		  "=&r" (__i), "=&r" (__tmp2) \
-		: "Jr" (base), "0" (high), "1" (low)); \
-	\
-	(res) = __quot32; \
-	__mod32; })
-
-#define do_div(n, base) ({ \
-	unsigned long long __quot; \
-	unsigned long __mod; \
-	unsigned long long __div; \
-	unsigned long __upper, __low, __high, __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__high = __div >> 32; \
-	__low = __div; \
-	__upper = __high; \
-	\
-	if (__high) \
-		__asm__("divu	$0, %z2, %z3" \
-			: "=h" (__upper), "=l" (__high) \
-			: "Jr" (__high), "Jr" (__base) \
-			: GCC_REG_ACCUM); \
-	\
-	__mod = do_div64_32(__low, __upper, __low, __base); \
-	\
-	__quot = __high; \
-	__quot = __quot << 32 | __low; \
-	(n) = __quot; \
-	__mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
-	unsigned long __quot; \
-	unsigned int __mod; \
-	unsigned long __div; \
-	unsigned int __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__mod = __div % __base; \
-	__quot = __div / __base; \
-	\
-	(n) = __quot; \
-	__mod; })
+#define __div64_32(n, base)						\
+({									\
+	unsigned long __cf, __tmp, __tmp2, __i;				\
+	unsigned long __quot32, __mod32;				\
+	unsigned long __high, __low;					\
+	unsigned long long __n;						\
+									\
+	__high = *__n >> 32;						\
+	__low = __n;							\
+	__asm__(							\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	noreorder				\n"	\
+	"	move	%2, $0					\n"	\
+	"	move	%3, $0					\n"	\
+	"	b	1f					\n"	\
+	"	 li	%4, 0x21				\n"	\
+	"0:							\n"	\
+	"	sll	$1, %0, 0x1				\n"	\
+	"	srl	%3, %0, 0x1f				\n"	\
+	"	or	%0, $1, %5				\n"	\
+	"	sll	%1, %1, 0x1				\n"	\
+	"	sll	%2, %2, 0x1				\n"	\
+	"1:							\n"	\
+	"	bnez	%3, 2f					\n"	\
+	"	 sltu	%5, %0, %z6				\n"	\
+	"	bnez	%5, 3f					\n"	\
+	"2:							\n"	\
+	"	 addiu	%4, %4, -1				\n"	\
+	"	subu	%0, %0, %z6				\n"	\
+	"	addiu	%2, %2, 1				\n"	\
+	"3:							\n"	\
+	"	bnez	%4, 0b\n\t"					\
+	"	 srl	%5, %1, 0x1f\n\t"				\
+	"	.set	pop"						\
+	: "=&r" (__mod32), "=&r" (__tmp),				\
+	  "=&r" (__quot32), "=&r" (__cf),				\
+	  "=&r" (__i), "=&r" (__tmp2)					\
+	: "Jr" (base), "0" (__high), "1" (__low));			\
+									\
+	(__n) = __quot32;						\
+	__mod32;							\
+})
 
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
 
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */
-- 
cgit v1.2.3


From d0ce9a5a47113eec041a0972a0b86134b8fd2828 Mon Sep 17 00:00:00 2001
From: Coly Li <coly.li@suse.de>
Date: Thu, 23 Apr 2009 03:06:06 +0800
Subject: MIPS: Cavium: Add struct clocksource * argument to
 octeon_cvmcount_read()

This patch modifies parameter of octeon_cvmcount_read() from 'void' to
'struct clocksource *cs', which fixes compile warning for incompatible
parameter type.

Signed-off-by: Coly Li <coly.li@suse.de>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/csrc-octeon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 70fd92c3165..96110f217dc 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
 	local_irq_restore(flags);
 }
 
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
 {
 	return read_c0_cvmcount();
 }
-- 
cgit v1.2.3


From a6d5ff04e83b36e0d5c2c50ef4d18e9f38b5abc2 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Tue, 5 May 2009 12:49:47 -0700
Subject: MIPS: Use force_sig when handling address errors.

When init is started it is SIGNAL_UNKILLABLE.  If it were to get an
address error, we would try to send it SIGBUS, but it would be ignored
and the faulting instruction restarted.  This results in an endless
loop.

We need to use force_sig() instead so it will actually die and give us
some useful information.

Reported-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/unaligned.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index bf4c4a979ab..67bd626942a 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -482,19 +482,19 @@ fault:
 		return;
 
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGSEGV, current, 1);
+	force_sig(SIGSEGV, current);
 
 	return;
 
 sigbus:
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGBUS, current, 1);
+	force_sig(SIGBUS, current);
 
 	return;
 
 sigill:
 	die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
-	send_sig(SIGILL, current, 1);
+	force_sig(SIGILL, current);
 }
 
 asmlinkage void do_ade(struct pt_regs *regs)
-- 
cgit v1.2.3


From 5d81b83d03eb32085c569854695e102dde7af544 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Mon, 4 May 2009 23:51:54 +0200
Subject: MIPS: Sibyte: Fix locking in set_irq_affinity

Locking of irq_desc is now done in irq_set_affinity; don't lock it again
in chip specific set_affinity function.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sibyte/bcm1480/irq.c | 7 ++-----
 arch/mips/sibyte/sb1250/irq.c  | 7 ++-----
 2 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 352352b3cb2..c147c4b35d3 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -113,7 +113,6 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 	unsigned int irq_dirty;
 
@@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&bcm1480_imr_lock);
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = bcm1480_irq_owner[irq];
@@ -153,8 +151,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
 		}
 	}
-	spin_unlock(&bcm1480_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
 }
 #endif
 
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index c08ff582da6..38cb998ade2 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -107,7 +107,6 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 
 	i = cpumask_first(mask);
@@ -121,8 +120,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&sb1250_imr_lock);
+	spin_lock_irqsave(&sb1250_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
@@ -144,8 +142,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
 	}
-	spin_unlock(&sb1250_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 #endif
 
-- 
cgit v1.2.3


From d8e2f53ac99f4ce7d63807a84f98d1b80df598cf Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 14 May 2009 07:46:59 -0400
Subject: cifs: fix error handling in parse_DFS_referrals

cifs_strndup_from_ucs returns NULL on error, not an ERR_PTR

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 75e6623a863..5759ba53dc9 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3976,9 +3976,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		max_len = data_end - temp;
 		node->path_name = cifs_strndup_from_ucs(temp, max_len,
 						      is_unicode, nls_codepage);
-		if (IS_ERR(node->path_name)) {
-			rc = PTR_ERR(node->path_name);
-			node->path_name = NULL;
+		if (!node->path_name) {
+			rc = -ENOMEM;
 			goto parse_DFS_referrals_exit;
 		}
 
@@ -3987,11 +3986,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 		max_len = data_end - temp;
 		node->node_name = cifs_strndup_from_ucs(temp, max_len,
 						      is_unicode, nls_codepage);
-		if (IS_ERR(node->node_name)) {
-			rc = PTR_ERR(node->node_name);
-			node->node_name = NULL;
-			goto parse_DFS_referrals_exit;
-		}
+		if (!node->node_name)
+			rc = -ENOMEM;
 	}
 
 parse_DFS_referrals_exit:
-- 
cgit v1.2.3


From fbc97e4c5c31ea198f912196b1379d7493362800 Mon Sep 17 00:00:00 2001
From: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date: Mon, 27 Apr 2009 09:23:37 +0200
Subject: eeepc-laptop: fix wlan rfkill state change during init

When an rfkill device is registered, the rfkill core will change its
state to the system default. So we need to prepare for state changes
*before* we register it. That means installing the eeepc-specific ACPI
callback which handles the hotplug of the wireless network adaptor.

This problem doesn't occur during normal operation.  You have to

1) Boot with wireless enabled. eeepc-laptop should load automatically.
2) modprobe -r eeepc-laptop
3) modprobe eeepc-laptop

On boot, the default rfkill state will be set to enabled.
With the current core code, step 2) will disable the wireless.
Therefore in step 3), the wireless will change state during registration,
from disabled to enabled.  But without this fix, the PCI device for the
wireless adaptor will not appear.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 6f54fd1757c..e21f7cd72e4 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -649,6 +649,9 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	if (ACPI_FAILURE(status))
 		printk(EEEPC_ERR "Error installing notify handler\n");
 
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
 	if (get_acpi(CM_ASL_WLAN) != -1) {
 		ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
 							   RFKILL_TYPE_WLAN);
@@ -704,9 +707,6 @@ static int eeepc_hotk_add(struct acpi_device *device)
 			goto bluetooth_fail;
 	}
 
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
 	return 0;
 
  bluetooth_fail:
-- 
cgit v1.2.3


From 64b86b6583db832b28bb54575e32b9e2a1a7d84f Mon Sep 17 00:00:00 2001
From: Darren Salt <linux@youmustbejoking.demon.co.uk>
Date: Mon, 27 Apr 2009 09:23:38 +0200
Subject: eeepc-laptop: report brightness control events via the input layer

This maps the brightness control events to one of two keys, either
KEY_BRIGHTNESSDOWN or KEY_BRIGHTNESSUP, as needed.

Some mapping has to be done due to the fact that the BIOS reports them as
<base value> + <current brightness index>; the selection is done according to
the sign of the change in brightness (if this is 0, no keypress is reported).

(Ref. http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-April/002001.html)

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index e21f7cd72e4..f54cfeac522 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -166,6 +166,8 @@ static struct key_entry eeepc_keymap[] = {
 	{KE_KEY, 0x1b, KEY_ZOOM },
 	{KE_KEY, 0x1c, KEY_PROG2 },
 	{KE_KEY, 0x1d, KEY_PROG3 },
+	{KE_KEY, NOTIFY_BRN_MIN,     KEY_BRIGHTNESSDOWN },
+	{KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP },
 	{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
 	{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
 	{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
@@ -512,11 +514,16 @@ static int eeepc_hotk_check(void)
 	return 0;
 }
 
-static void notify_brn(void)
+static int notify_brn(void)
 {
+	/* returns the *previous* brightness, or -1 */
 	struct backlight_device *bd = eeepc_backlight_device;
-	if (bd)
+	if (bd) {
+		int old = bd->props.brightness;
 		bd->props.brightness = read_brightness(bd);
+		return old;
+	}
+	return -1;
 }
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
@@ -558,17 +565,33 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
 {
 	static struct key_entry *key;
 	u16 count;
+	int brn = -ENODEV;
 
 	if (!ehotk)
 		return;
 	if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
-		notify_brn();
+		brn = notify_brn();
 	count = ehotk->event_count[event % 128]++;
 	acpi_bus_generate_proc_event(ehotk->device, event, count);
 	acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
 					dev_name(&ehotk->device->dev), event,
 					count);
 	if (ehotk->inputdev) {
+		if (brn != -ENODEV) {
+			/* brightness-change events need special
+			 * handling for conversion to key events
+			 */
+			if (brn < 0)
+				brn = event;
+			else
+				brn += NOTIFY_BRN_MIN;
+			if (event < brn)
+				event = NOTIFY_BRN_MIN; /* brightness down */
+			else if (event > brn)
+				event = NOTIFY_BRN_MIN + 2; /* ... up */
+			else
+				event = NOTIFY_BRN_MIN + 1; /* ... unchanged */
+		}
 		key = eepc_get_entry_by_scancode(event);
 		if (key) {
 			switch (key->type) {
-- 
cgit v1.2.3


From 978605c4fd8e7470f225eec7b5aab69d8796afcc Mon Sep 17 00:00:00 2001
From: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Date: Mon, 27 Apr 2009 09:23:39 +0200
Subject: eeepc-laptop: Work around rfkill firmware bug

1) Buggy firmware can change the RFKILL state by itself. This is easily
   detected.  The RFKILL API states that in such cases, we should call
   rfkill_force_state() to notify the core.

   I have reported the bug to Asus. I believe this is the right thing
   to do for robustness, even if this particular firmware bug is fixed.

2) The same bug causes the wireless toggle key to be reported as 0x11
   instead of 0x10.  0x11 is otherwise unused, so it should be safe to
   add this as a new keycode.

The bug is triggered by removing the laptop battery while hibernated.

On resume, the wireless toggle key causes the firmware to toggle the
wireless state itself.  (Also, the key is reported as 0x11 when the
current wireless state is OFF).

This is very poor behaviour because the OS can't predict whether the
firmware is controlling the RFKILL state.

Without this workaround, the bug means users have to press the wireless
toggle key twice to enable, due to the OS/firmware conflict.  (Assuming
rfkill-input or equivalent is being used).  The workaround avoids this.

I believe that acpid scripts which toggle the value of the sysfs state file
when the toggle key is pressed will be rendered ineffective by the bug,
regardless of this workaround.  If they simply toggle the state, when the
firmware has already toggled it, then you will never see a state change.

Tested on "EEEPC 4G" only.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index f54cfeac522..57f21f0a565 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -158,6 +158,7 @@ enum { KE_KEY, KE_END };
 static struct key_entry eeepc_keymap[] = {
 	/* Sleep already handled via generic ACPI code */
 	{KE_KEY, 0x10, KEY_WLAN },
+	{KE_KEY, 0x11, KEY_WLAN },
 	{KE_KEY, 0x12, KEY_PROG1 },
 	{KE_KEY, 0x13, KEY_MUTE },
 	{KE_KEY, 0x14, KEY_VOLUMEDOWN },
@@ -528,6 +529,7 @@ static int notify_brn(void)
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 {
+	enum rfkill_state state;
 	struct pci_dev *dev;
 	struct pci_bus *bus = pci_find_bus(0, 1);
 
@@ -539,7 +541,9 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 		return;
 	}
 
-	if (get_acpi(CM_ASL_WLAN) == 1) {
+	eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state);
+
+	if (state == RFKILL_STATE_UNBLOCKED) {
 		dev = pci_get_slot(bus, 0);
 		if (dev) {
 			/* Device already present */
@@ -559,6 +563,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 			pci_dev_put(dev);
 		}
 	}
+
+	rfkill_force_state(ehotk->eeepc_wlan_rfkill, state);
 }
 
 static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
-- 
cgit v1.2.3


From 158ca1d75dd0d6223f3b1dd741d30777da62ab80 Mon Sep 17 00:00:00 2001
From: Grigori Goronzy <greg@chown.ath.cx>
Date: Mon, 27 Apr 2009 09:23:40 +0200
Subject: eeepc-laptop: support for super hybrid engine (SHE)

The older eeepc-acpi driver allowed to control the SHE performance
preset through a ACPI function for just this purpose. SHE underclocks
and undervolts the FSB and undervolts the CPU (at preset 2,
"powersave"), or slightly overclocks the CPU (at preset 0,
"performance"). Preset 1 is the default setting with default clocks and
voltage.

The new eeepc-laptop driver doesn't support it anymore.
The attached patch adds support for it to eeepc-laptop. It's very
straight-forward and almost trivial.

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 57f21f0a565..7aaf5879f66 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -384,11 +384,13 @@ static ssize_t show_sys_acpi(int cm, char *buf)
 EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
 EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
 EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
+EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
 
 static struct attribute *platform_attributes[] = {
 	&dev_attr_camera.attr,
 	&dev_attr_cardr.attr,
 	&dev_attr_disp.attr,
+	&dev_attr_cpufv.attr,
 	NULL
 };
 
-- 
cgit v1.2.3


From 309f5fbda37d5e8f1233e8b80b8e9de77262e864 Mon Sep 17 00:00:00 2001
From: Corentin Chary <corentincj@iksaif.net>
Date: Mon, 27 Apr 2009 09:23:42 +0200
Subject: asus-laptop: fix input keycode

KEY_STOP is now KEY_STOPCD
 It's the correct key to stop a media
BTN_EXTRA is now KEY_SCREENLOCK:
 The laptop manual tells us that this key is for screenlock
KEY_TV is now KEY_PROG1
 So it can be reported to X server

Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361505

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/asus-laptop.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index eeafc6c0160..bfc1a8892a3 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -269,16 +269,16 @@ static struct key_entry asus_keymap[] = {
 	{KE_KEY, 0x34, KEY_SWITCHVIDEOMODE},
 	{KE_KEY, 0x40, KEY_PREVIOUSSONG},
 	{KE_KEY, 0x41, KEY_NEXTSONG},
-	{KE_KEY, 0x43, KEY_STOP},
+	{KE_KEY, 0x43, KEY_STOPCD},
 	{KE_KEY, 0x45, KEY_PLAYPAUSE},
 	{KE_KEY, 0x50, KEY_EMAIL},
 	{KE_KEY, 0x51, KEY_WWW},
-	{KE_KEY, 0x5C, BTN_EXTRA},  /* Performance */
+	{KE_KEY, 0x5C, KEY_SCREENLOCK},  /* Screenlock */
 	{KE_KEY, 0x5D, KEY_WLAN},
 	{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
 	{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
 	{KE_KEY, 0x82, KEY_CAMERA},
-	{KE_KEY, 0x8A, KEY_TV},
+	{KE_KEY, 0x8A, KEY_PROG1},
 	{KE_KEY, 0x95, KEY_MEDIA},
 	{KE_KEY, 0x99, KEY_PHONE},
 	{KE_END, 0},
-- 
cgit v1.2.3


From bd32005e126a465deda5d046a62f6bb842f4d9cf Mon Sep 17 00:00:00 2001
From: Corentin Chary <corentincj@iksaif.net>
Date: Mon, 27 Apr 2009 09:23:43 +0200
Subject: eeepc-laptop: unregister_rfkill_notifier on failure

If there is a failure during eeepc_hotk_add() we need
to remove the acpi_notify_handler.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/platform/x86/eeepc-laptop.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 7aaf5879f66..353a898c369 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -748,6 +748,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
  wlan_fail:
 	if (ehotk->eeepc_wlan_rfkill)
 		rfkill_free(ehotk->eeepc_wlan_rfkill);
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
  ehotk_fail:
 	kfree(ehotk);
 	ehotk = NULL;
-- 
cgit v1.2.3


From 5a641bcd6398841cc4606b0a732d41a09256fd94 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 14 May 2009 08:49:13 -0700
Subject: ALSA: pcsp: fix printk format warning

Fix printk format warning:

sound/drivers/pcsp/pcsp_mixer.c:54: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/drivers/pcsp/pcsp_mixer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index caeb0f57fcc..771955a9be7 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -50,7 +50,7 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol,
 	uinfo->value.enumerated.items = chip->max_treble + 1;
 	if (uinfo->value.enumerated.item > chip->max_treble)
 		uinfo->value.enumerated.item = chip->max_treble;
-	sprintf(uinfo->value.enumerated.name, "%d",
+	sprintf(uinfo->value.enumerated.name, "%lu",
 			PCSP_CALC_RATE(uinfo->value.enumerated.item));
 	return 0;
 }
-- 
cgit v1.2.3


From be687518781f5aed86bcc152023b9fcb4d5c6b50 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 14 May 2009 10:23:09 -0600
Subject: powerpc/boot: add simpleImage.* to clean-files list

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4458abb67c5..bff7f127ce1 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -367,7 +367,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
-	otheros.bld *.dtb
+	simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
-- 
cgit v1.2.3


From 514a30d95f3277b9abed6044272ea97431bb9658 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 14 May 2009 10:23:10 -0600
Subject: powerpc/virtex: Add uImage to the default images list

It is common to use U-Boot on Xilinx Virtex platforms.  This patch
ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/40x/Kconfig | 1 +
 arch/powerpc/platforms/44x/Kconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 14e027f5be6..f39c953d535 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -153,6 +153,7 @@ config 405GPR
 
 config XILINX_VIRTEX
 	bool
+	select DEFAULT_UIMAGE
 
 config XILINX_VIRTEX_II_PRO
 	bool
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index bf5c7ff2e6e..0d83a6a0397 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -246,6 +246,7 @@ config IBM440EP_ERR42
 # Xilinx specific config options.
 config XILINX_VIRTEX
 	bool
+	select DEFAULT_UIMAGE
 
 # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
 config XILINX_VIRTEX_5_FXT
-- 
cgit v1.2.3


From ba10eedf5a3fba991563873d4cb65a067aa13f24 Mon Sep 17 00:00:00 2001
From: John Linn <john.linn@xilinx.com>
Date: Thu, 14 May 2009 10:23:11 -0600
Subject: powerpc/virtex: Fix duplicate level irq events.

The interrupt controller was not handling level interrupts correctly
such that duplicate interrupts were happening. This fixes the problem
and adds edge type interrupts which are needed in Xilinx hardware.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/sysdev/xilinx_intc.c | 117 ++++++++++++++++++++++++++++++++++----
 1 file changed, 107 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index a22e1a2df1a..c658b413c9b 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -41,8 +41,32 @@
 
 static struct irq_host *master_irqhost;
 
+#define XILINX_INTC_MAXIRQS	(32)
+
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+	IRQ_TYPE_EDGE_RISING,
+	IRQ_TYPE_EDGE_FALLING,
+	IRQ_TYPE_LEVEL_HIGH,
+	IRQ_TYPE_LEVEL_LOW,
+};
+
 /*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
  */
 static void xilinx_intc_mask(unsigned int virq)
 {
@@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq)
 	out_be32(regs + XINTC_CIE, 1 << irq);
 }
 
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+	struct irq_desc *desc = get_irq_desc(virq);
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+	return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
 	pr_debug("unmask: %d\n", irq);
 	out_be32(regs + XINTC_SIE, 1 << irq);
+
+	/* ack level irqs because they can't be acked during
+	 * ack function since the handle_level_irq function
+	 * acks the irq before calling the inerrupt handler
+	 */
+	out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static void xilinx_intc_ack(unsigned int virq)
+static struct irq_chip xilinx_intc_level_irqchip = {
+	.typename = "Xilinx Level INTC",
+	.mask = xilinx_intc_mask,
+	.mask_ack = xilinx_intc_mask,
+	.unmask = xilinx_intc_level_unmask,
+	.set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void *regs = get_irq_chip_data(virq);
+	pr_debug("unmask: %d\n", irq);
+	out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_edge_ack(unsigned int virq)
 {
 	int irq = virq_to_hw(virq);
 	void * regs = get_irq_chip_data(virq);
@@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq)
 	out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static struct irq_chip xilinx_intc_irqchip = {
-	.typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+	.typename = "Xilinx Edge  INTC",
 	.mask = xilinx_intc_mask,
-	.unmask = xilinx_intc_unmask,
-	.ack = xilinx_intc_ack,
+	.unmask = xilinx_intc_edge_unmask,
+	.ack = xilinx_intc_edge_ack,
+	.set_type = xilinx_intc_set_type,
 };
 
 /*
  * IRQ Host operations
  */
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+				u32 *intspec, unsigned int intsize,
+				irq_hw_number_t *out_hwirq,
+				unsigned int *out_flags)
+{
+	if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
+		return -EINVAL;
+
+	/* keep a copy of the interrupt type til the interrupt is mapped
+	 */
+	xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+	/* Xilinx uses 2 interrupt entries, the 1st being the h/w
+	 * interrupt number, the 2nd being the interrupt type, edge or level
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = xilinx_intc_map_senses[intspec[1]];
+
+	return 0;
+}
 static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
 				  irq_hw_number_t irq)
 {
 	set_irq_chip_data(virq, h->host_data);
-	set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
-	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+	    xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+		set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+			handle_level_irq);
+	} else {
+		set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+			handle_edge_irq);
+	}
 	return 0;
 }
 
 static struct irq_host_ops xilinx_intc_ops = {
 	.map = xilinx_intc_map,
+	.xlate = xilinx_intc_xlate,
 };
 
 struct irq_host * __init
@@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np)
 	out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
 
 	/* Allocate and initialize an irq_host structure. */
-	irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+	irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
+			     &xilinx_intc_ops, -1);
 	if (!irq)
 		panic(__FILE__ ": Cannot allocate IRQ host\n");
 	irq->host_data = regs;
-- 
cgit v1.2.3


From 29321357ac6db54eeb8574da1f6c3e0ce8cfbb60 Mon Sep 17 00:00:00 2001
From: Vladimir Zajac <eightgraph@gmail.com>
Date: Wed, 6 May 2009 19:34:21 +0200
Subject: thermal: fix off-by-1 error in trip point trigger condition

This patch fixes a regression caused by commit
b1569e99c795bf83b4ddf41c4f1c42761ab7f75e
"ACPI: move thermal trip handling to generic thermal layer"
which accidentally changed trip point trigger condition to
  temp > trip_temp

This patch changes the trigger condition back to
  temp >= trip_temp

Signed-off-by: Vladimir Zajac <eightgraph@gmail.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/thermal/thermal_sys.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index d0b093b66ad..5e38ba10a3a 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -961,7 +961,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 
 		switch (trip_type) {
 		case THERMAL_TRIP_CRITICAL:
-			if (temp > trip_temp) {
+			if (temp >= trip_temp) {
 				if (tz->ops->notify)
 					ret = tz->ops->notify(tz, count,
 							      trip_type);
@@ -974,7 +974,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 			}
 			break;
 		case THERMAL_TRIP_HOT:
-			if (temp > trip_temp)
+			if (temp >= trip_temp)
 				if (tz->ops->notify)
 					tz->ops->notify(tz, count, trip_type);
 			break;
@@ -986,14 +986,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 
 				cdev = instance->cdev;
 
-				if (temp > trip_temp)
+				if (temp >= trip_temp)
 					cdev->ops->set_cur_state(cdev, 1);
 				else
 					cdev->ops->set_cur_state(cdev, 0);
 			}
 			break;
 		case THERMAL_TRIP_PASSIVE:
-			if (temp > trip_temp || tz->passive)
+			if (temp >= trip_temp || tz->passive)
 				thermal_zone_device_passive(tz, temp,
 							    trip_temp, count);
 			break;
-- 
cgit v1.2.3


From 2757495c906113896b378bf084708846273c87b2 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Thu, 14 May 2009 13:10:02 -0400
Subject: Btrfs: init inode ordered_data_close flag properly

This flag is used to decide when we need to send a given file through
the ordered code to make sure it is fully written before a transaction
commits.  It was not being properly set to zero when the inode was
being setup.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 90c23eb2882..22450bd972d 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3122,6 +3122,7 @@ static noinline void init_btrfs_i(struct inode *inode)
 	bi->flags = 0;
 	bi->index_cnt = (u64)-1;
 	bi->last_unlink_trans = 0;
+	bi->ordered_data_close = 0;
 	extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
 	extent_io_tree_init(&BTRFS_I(inode)->io_tree,
 			     inode->i_mapping, GFP_NOFS);
-- 
cgit v1.2.3


From 76a05b35a320e8c968d0fec8f512a1acae227309 Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Thu, 14 May 2009 13:24:30 -0400
Subject: Btrfs: Don't loop forever on metadata IO failures

When a btrfs metadata read fails, the first thing we try to do is find
a good copy on another mirror of the block.  If this fails, read_tree_block()
ends up returning a buffer that isn't up to date.

The btrfs btree reading code was reworked to drop locks and repeat
the search when IO was done, but the changes didn't add a check for failed
reads.  The end result was looping forever on buffers that were never
going to become up to date.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ctree.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index a99f1c2a710..fedf8b9f03a 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1469,6 +1469,7 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 	u32 blocksize;
 	struct extent_buffer *b = *eb_ret;
 	struct extent_buffer *tmp;
+	int ret;
 
 	blocknr = btrfs_node_blockptr(b, slot);
 	gen = btrfs_node_ptr_generation(b, slot);
@@ -1476,6 +1477,10 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 
 	tmp = btrfs_find_tree_block(root, blocknr, blocksize);
 	if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
+		/*
+		 * we found an up to date block without sleeping, return
+		 * right away
+		 */
 		*eb_ret = tmp;
 		return 0;
 	}
@@ -1483,7 +1488,9 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 	/*
 	 * reduce lock contention at high levels
 	 * of the btree by dropping locks before
-	 * we read.
+	 * we read.  Don't release the lock on the current
+	 * level because we need to walk this node to figure
+	 * out which blocks to read.
 	 */
 	btrfs_unlock_up_safe(p, level + 1);
 	btrfs_set_path_blocking(p);
@@ -1494,10 +1501,21 @@ read_block_for_search(struct btrfs_trans_handle *trans,
 		reada_for_search(root, p, level, slot, key->objectid);
 
 	btrfs_release_path(NULL, p);
+
+	ret = -EAGAIN;
 	tmp = read_tree_block(root, blocknr, blocksize, gen);
-	if (tmp)
+	if (tmp) {
+		/*
+		 * If the read above didn't mark this buffer up to date,
+		 * it will never end up being up to date.  Set ret to EIO now
+		 * and give up so that our caller doesn't loop forever
+		 * on our EAGAINs.
+		 */
+		if (!btrfs_buffer_uptodate(tmp, 0))
+			ret = -EIO;
 		free_extent_buffer(tmp);
-	return -EAGAIN;
+	}
+	return ret;
 }
 
 /*
@@ -1696,6 +1714,9 @@ cow_done:
 			if (ret == -EAGAIN)
 				goto again;
 
+			if (ret == -EIO)
+				goto done;
+
 			if (!p->skip_locking) {
 				int lret;
 
@@ -1738,6 +1759,8 @@ done:
 	 */
 	if (!p->leave_spinning)
 		btrfs_set_path_blocking(p);
+	if (ret < 0)
+		btrfs_release_path(root, p);
 	return ret;
 }
 
@@ -4212,6 +4235,11 @@ again:
 		if (ret == -EAGAIN)
 			goto again;
 
+		if (ret < 0) {
+			btrfs_release_path(root, path);
+			goto done;
+		}
+
 		if (!path->skip_locking) {
 			ret = btrfs_try_spin_lock(next);
 			if (!ret) {
@@ -4246,6 +4274,11 @@ again:
 		if (ret == -EAGAIN)
 			goto again;
 
+		if (ret < 0) {
+			btrfs_release_path(root, path);
+			goto done;
+		}
+
 		if (!path->skip_locking) {
 			btrfs_assert_tree_locked(path->nodes[level]);
 			ret = btrfs_try_spin_lock(next);
-- 
cgit v1.2.3


From cc7b0c9b701a079016183f3546b4d720194b367f Mon Sep 17 00:00:00 2001
From: Chris Mason <chris.mason@oracle.com>
Date: Thu, 14 May 2009 13:31:21 -0400
Subject: Btrfs: remove some WARN_ONs in the IO failure path

These debugging WARN_ONs make too much console noise during regular
IO failures.  An IO failure will still generate a number of messages
as we verify checksums etc, but these two are not needed.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/disk-io.c | 2 --
 fs/btrfs/inode.c   | 1 -
 2 files changed, 3 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 0ff16d3331d..4b0ea0b80c2 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -848,8 +848,6 @@ struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
 
 	if (ret == 0)
 		set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
-	else
-		WARN_ON(1);
 	return buf;
 
 }
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 22450bd972d..1c8b0190d03 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4296,7 +4296,6 @@ out:
 	}
 	if (err) {
 		free_extent_map(em);
-		WARN_ON(1);
 		return ERR_PTR(err);
 	}
 	return em;
-- 
cgit v1.2.3


From 5d847a8ed970d17e2734ff9e07a74fe36cceb24e Mon Sep 17 00:00:00 2001
From: Li Hong <lihong.hi@gmail.com>
Date: Thu, 14 May 2009 13:52:21 -0400
Subject: Btrfs: remove outdated comment in btrfs_ioctl_resize()

In Li Zefan's commit dae7b665cf6d6e6e733f1c9c16cf55547dd37e33,
a combination call of kmalloc() and copy_from_user() is replaced by
memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/ioctl.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 48762aa1e94..db84aa48ab7 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -437,10 +437,6 @@ out_unlock:
 	return 0;
 }
 
-/*
- * Called inside transaction, so use GFP_NOFS
- */
-
 static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
 {
 	u64 new_size;
-- 
cgit v1.2.3


From 6b65c5c61bf86086817a5ed786c8f45755ac83b3 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 14 May 2009 13:52:21 -0400
Subject: Btrfs: make show_options result match actual option names

The notreelog and flushoncommit mount options were being printed slightly
differently.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index bf0e84c7560..e99510bfbff 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -436,9 +436,9 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (btrfs_test_opt(root, SSD))
 		seq_puts(seq, ",ssd");
 	if (btrfs_test_opt(root, NOTREELOG))
-		seq_puts(seq, ",no-treelog");
+		seq_puts(seq, ",notreelog");
 	if (btrfs_test_opt(root, FLUSHONCOMMIT))
-		seq_puts(seq, ",flush-on-commit");
+		seq_puts(seq, ",flushoncommit");
 	if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
 		seq_puts(seq, ",noacl");
 	return 0;
-- 
cgit v1.2.3


From 9f55684c2d9869e8cc53595a3fee679958511cfb Mon Sep 17 00:00:00 2001
From: Sankar P <sankar.curiosity@gmail.com>
Date: Thu, 14 May 2009 13:52:22 -0400
Subject: Btrfs: Spelling fix in btrfs_lookup_first_block_group comments

Signed-off-by: Sankar P <sankar.curiosity@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
---
 fs/btrfs/extent-tree.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index e4966444811..3e2c7c738f2 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -312,7 +312,7 @@ btrfs_lookup_first_block_group(struct btrfs_fs_info *info, u64 bytenr)
 }
 
 /*
- * return the block group that contains teh given bytenr
+ * return the block group that contains the given bytenr
  */
 struct btrfs_block_group_cache *btrfs_lookup_block_group(
 						 struct btrfs_fs_info *info,
-- 
cgit v1.2.3


From 2a8964d63d50dd2d65d71d342bc7fb6ef4117614 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Thu, 14 May 2009 17:05:39 -0400
Subject: ext4: Clear the unwritten buffer_head flag after the extent is
 initialized

The BH_Unwritten flag indicates that the buffer is allocated on disk
but has not been written; that is, the disk was part of a persistent
preallocation area.  That flag should only be set when a get_blocks()
function is looking up a inode's logical to physical block mapping.

When ext4_get_blocks_wrap() is called with create=1, the uninitialized
extent is converted into an initialized one, so the BH_Unwritten flag
is no longer appropriate.  Hence, we need to make sure the
BH_Unwritten is not left set, since the combination of BH_Mapped and
BH_Unwritten is not allowed; among other things, it will result ext4's
get_block() to be called over and over again during the write_begin
phase of write(2).

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0ac31a06422..2a9ffd528dd 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1149,6 +1149,7 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 	int retval;
 
 	clear_buffer_mapped(bh);
+	clear_buffer_unwritten(bh);
 
 	/*
 	 * Try to see if we can get  the block without requesting
@@ -1178,6 +1179,18 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 	if (retval > 0 && buffer_mapped(bh))
 		return retval;
 
+	/*
+	 * When we call get_blocks without the create flag, the
+	 * BH_Unwritten flag could have gotten set if the blocks
+	 * requested were part of a uninitialized extent.  We need to
+	 * clear this flag now that we are committed to convert all or
+	 * part of the uninitialized extent to be an initialized
+	 * extent.  This is because we need to avoid the combination
+	 * of BH_Unwritten and BH_Mapped flags being simultaneously
+	 * set on the buffer_head.
+	 */
+	clear_buffer_unwritten(bh);
+
 	/*
 	 * New blocks allocate and/or writing to uninitialized extent
 	 * will possibly result in updating i_data, so we take
-- 
cgit v1.2.3


From 13f4c435ebf2a7c150ffa714f3b23b8e4e8cb42f Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Tue, 12 May 2009 15:27:36 -0700
Subject: drm/i915: Don't allow binding objects into the last page of the
 aperture.

This should avoid a class of bugs where the hardware prefetches past the
end of the object, and walks into unallocated memory when the object is
bound to the last page of the aperture.

fd.o bug #21488

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 051134c56ae..3133f991968 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1011,8 +1011,16 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	/* Basic memrange allocator for stolen space (aka vram) */
 	drm_mm_init(&dev_priv->vram, 0, prealloc_size);
 
-	/* Let GEM Manage from end of prealloc space to end of aperture */
-	i915_gem_do_init(dev, prealloc_size, agp_size);
+	/* Let GEM Manage from end of prealloc space to end of aperture.
+	 *
+	 * However, leave one page at the end still bound to the scratch page.
+	 * There are a number of places where the hardware apparently
+	 * prefetches past the end of the object, and we've seen multiple
+	 * hangs with the GPU head pointer stuck in a batchbuffer bound
+	 * at the last page of the aperture.  One page should be enough to
+	 * keep any prefetching inside of the aperture.
+	 */
+	i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
 
 	ret = i915_gem_init_ringbuffer(dev);
 	if (ret)
-- 
cgit v1.2.3


From 0ba0e9e1f173a59ba402a253d356612c821b7a14 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Tue, 7 Apr 2009 11:02:28 +0800
Subject: drm/i915: workaround IGD i2c bus issue in kernel side (v2)

In IGD, DPCUNIT_CLOCK_GATE_DISABLE bit should be set, otherwise i2c
access will be wrong.

v2: Disable CLOCK_GATE_DISABLE bit after bit bashing as suggested by Eric.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_reg.h    |  1 +
 drivers/gpu/drm/i915/intel_drv.h   |  2 +-
 drivers/gpu/drm/i915/intel_i2c.c   | 17 +++++++++++++++++
 drivers/gpu/drm/i915/intel_modes.c |  6 ++++++
 4 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 52119473226..15da44cf21b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -526,6 +526,7 @@
 #define   DPLLA_INPUT_BUFFER_ENABLE	(1 << 0)
 #define D_STATE		0x6104
 #define CG_2D_DIS	0x6200
+#define DPCUNIT_CLOCK_GATE_DISABLE	(1 << 24)
 #define CG_3D_DIS	0x6204
 
 /*
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 957daef8edf..cf294302893 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -109,7 +109,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 void intel_i2c_destroy(struct intel_i2c_chan *chan);
 int intel_ddc_get_modes(struct intel_output *intel_output);
 extern bool intel_ddc_probe(struct intel_output *intel_output);
-
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
 extern void intel_crt_init(struct drm_device *dev);
 extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
 extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 5ee9d4c2575..f7061f68d05 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -34,6 +34,21 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* When using bit bashing for I2C, this bit needs to be set to 1 */
+	if (!IS_IGD(dev))
+		return;
+	if (enable)
+		I915_WRITE(CG_2D_DIS,
+			I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE);
+	else
+		I915_WRITE(CG_2D_DIS,
+			I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE));
+}
+
 /*
  * Intel GPIO access functions
  */
@@ -153,8 +168,10 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
 		goto out_free;
 
 	/* JJJ:  raise SCL and SDA? */
+	intel_i2c_quirk_set(dev, true);
 	set_data(chan, 1);
 	set_clock(chan, 1);
+	intel_i2c_quirk_set(dev, false);
 	udelay(20);
 
 	return chan;
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index 07d7ec97616..e0910fefce8 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -27,6 +27,7 @@
 #include <linux/fb.h>
 #include "drmP.h"
 #include "intel_drv.h"
+#include "i915_drv.h"
 
 /**
  * intel_ddc_probe
@@ -52,7 +53,10 @@ bool intel_ddc_probe(struct intel_output *intel_output)
 		}
 	};
 
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
 	ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+
 	if (ret == 2)
 		return true;
 
@@ -70,8 +74,10 @@ int intel_ddc_get_modes(struct intel_output *intel_output)
 	struct edid *edid;
 	int ret = 0;
 
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
 	edid = drm_get_edid(&intel_output->base,
 			    &intel_output->ddc_bus->adapter);
+	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
 	if (edid) {
 		drm_mode_connector_update_edid_property(&intel_output->base,
 							edid);
-- 
cgit v1.2.3


From 802c7eb646848d769a07704c16f7a3bbec9e5829 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Tue, 5 May 2009 16:03:48 -0700
Subject: drm/i915: sanity check IER at wait_request time

We might sleep here anyway so I hope an extra uncached read is ok to
add.

In #20896 we found that vbetool clobbers the IER.  In KMS mode this is
particularly bad since we don't set the interrupt regs late (in
EnterVT), so we'd fail to get *any* interrupts at all after X started
(since some distros have scripts that call vbetool at X startup
apparently).

So this patch checks IER at wait_request time, and re-enables
interrupts if it's been clobbered.  In a proper config this check
should never be triggered.

This is really a distro issue, but having a sanity check is nice, as
long as it doesn't have a real performance hit.

Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Moved the check inside of the sleeping case to avoid perf cost]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_gem.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ee896d91c5b..b189b49c760 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1691,11 +1691,20 @@ static int
 i915_wait_request(struct drm_device *dev, uint32_t seqno)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 ier;
 	int ret = 0;
 
 	BUG_ON(seqno == 0);
 
 	if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+		ier = I915_READ(IER);
+		if (!ier) {
+			DRM_ERROR("something (likely vbetool) disabled "
+				  "interrupts, re-enabling\n");
+			i915_driver_irq_preinstall(dev);
+			i915_driver_irq_postinstall(dev);
+		}
+
 		dev_priv->mm.waiting_gem_seqno = seqno;
 		i915_user_irq_get(dev);
 		ret = wait_event_interruptible(dev_priv->irq_queue,
-- 
cgit v1.2.3


From 425d244c86700bdbc68d096c812336b6a5b9b4e9 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Tue, 5 May 2009 10:00:25 -0400
Subject: drm/i915: ignore LVDS on intel graphics systems that lie about having
 it

There are a number of small form factor desktop systems with Intel mobile
graphics chips that lie and say they have an LVDS. With kernel mode-setting,
this becomes a problem, and makes native resolution boot go haywire -- for
example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to
have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080
display uses only the top left 1024x768, and auto-configured X will end
up only 1024x768 as well. With this change, graphical boot and X
both do 1920x1080 as expected.

Note that we're simply embracing and extending the early bail-out code
in place for the Mac Mini here. The xorg intel driver uses pci subsystem
device and vendor id for matching, while we're using dmi lookups here.
The MSI addition is courtesy of and tested by Bill Nottingham.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_lvds.c | 54 +++++++++++++++++++++++++++++++++------
 1 file changed, 46 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6619f26e46a..439a8651499 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -384,7 +384,51 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
 	.destroy = intel_lvds_enc_destroy,
 };
 
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+	return 1;
+}
 
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id __initdata intel_no_lvds[] = {
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core 2 series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "MSI IM-945GSE-A",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Dell Studio Hybrid",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+		},
+	},
+
+	/* FIXME: add a check for the Aopen Mini PC */
+
+	{ }	/* terminating entry */
+};
 
 /**
  * intel_lvds_init - setup LVDS connectors on this device
@@ -404,15 +448,9 @@ void intel_lvds_init(struct drm_device *dev)
 	u32 lvds;
 	int pipe;
 
-	/* Blacklist machines that we know falsely report LVDS. */
-	/* FIXME: add a check for the Aopen Mini PC */
-
-	/* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */
-	if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") ||
-	   dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) {
-		DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n");
+	/* Skip init on machines we know falsely report LVDS */
+	if (dmi_check_system(intel_no_lvds))
 		return;
-	}
 
 	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output) {
-- 
cgit v1.2.3


From e92597cffffabe9a9a85db462045330970c498d0 Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Wed, 13 May 2009 14:46:12 +0800
Subject: drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.

Although spec say CRT_HOTPLUG_ACTIVATION_PERIOD_64 is only useful for
mobile platform, it is also required to detect vga on G4x desktops correctly.
Tested on G45/G43/Q45 platforms with no regressions.

It fixed freedesktop.org bug #21120 and part of bug #21210

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_crt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9bdd959260a..19148c3df63 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -161,7 +161,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
-	if (IS_GM45(dev))
+	if (IS_G4X(dev))
 		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
 
 	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
-- 
cgit v1.2.3


From c9ed4486bdee3b54cb544fc181057bc6bf1ae45c Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Wed, 13 May 2009 15:08:27 +0800
Subject: drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS.

It fixed bug #21659

Signed-off-by: Ma Ling <ling.ma@intel.com>
[anholt: hand-applied because git-am is too picky]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_drv.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b47af07f391..9b149fe824c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -786,7 +786,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x2E22 || \
 		       (dev)->pci_device == 0x2E32)
 
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
+			(dev)->pci_device == 0x2A12)
 
 #define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
 
-- 
cgit v1.2.3


From 9d2949a4cdb77b9b5c243c79be6489d34d770c7c Mon Sep 17 00:00:00 2001
From: Ma Ling <ling.ma@intel.com>
Date: Mon, 11 May 2009 11:33:22 +0800
Subject: drm/i915: Set HDMI hot plug interrupt enable for only the output in
 question.

We detect HDMI output connection status by writing to HOT Plug Interrupt
Detect Enable bit in PORT_HOTPLUG_EN.  The behavior will generate a specified
interrupt, which is caught by audio driver, but during one detection driver
set all Detect Enable bits of HDMIB, HDMIC HDMID, and generate wrong
interrupt signals for current output, according to the signals audio driver
misunderstand device status. The patch intends to handle corresponding
output precisely.

It fixed freedesktop.org bug #21371

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 55037422538..d0983bb93a1 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -155,11 +155,18 @@ intel_hdmi_detect(struct drm_connector *connector)
 
 	temp = I915_READ(PORT_HOTPLUG_EN);
 
-	I915_WRITE(PORT_HOTPLUG_EN,
-		   temp |
-		   HDMIB_HOTPLUG_INT_EN |
-		   HDMIC_HOTPLUG_INT_EN |
-		   HDMID_HOTPLUG_INT_EN);
+	switch (hdmi_priv->sdvox_reg) {
+	case SDVOB:
+		temp |= HDMIB_HOTPLUG_INT_EN;
+		break;
+	case SDVOC:
+		temp |= HDMIC_HOTPLUG_INT_EN;
+		break;
+	default:
+		return connector_status_unknown;
+	}
+
+	I915_WRITE(PORT_HOTPLUG_EN, temp);
 
 	POSTING_READ(PORT_HOTPLUG_EN);
 
-- 
cgit v1.2.3


From 08d7b3d1edff84bd673d9e9ab36b5aa62e1ba903 Mon Sep 17 00:00:00 2001
From: Carl Worth <cworth@cworth.org>
Date: Wed, 29 Apr 2009 14:43:54 -0700
Subject: drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.

This allows userlevel code to discover the pipe number corresponding
to a given CRTC ID. This is necessary for doing pipe-specific
operations such as waiting for vblank on a given CRTC.  Failure to use
the right pipe mapping can result in GPU hangs, or at least failure
to actually sync to vblank.

Signed-off-by: Carl Worth <cworth@cworth.org>
[anholt: Style touchups from review]
Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/i915/i915_dma.c      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 31 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |  2 ++
 include/drm/i915_drm.h               | 10 ++++++++++
 4 files changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 3133f991968..53d54455262 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1358,6 +1358,7 @@ struct drm_ioctl_desc i915_ioctls[] = {
 	DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
 	DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
 	DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
+	DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
 };
 
 int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bdcda36953b..3387cf32f38 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1804,6 +1804,37 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 	}
 }
 
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+	struct drm_crtc *crtc = NULL;
+	int pipe = -1;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+		if (crtc->base.id == pipe_from_crtc_id->crtc_id) {
+			pipe = intel_crtc->pipe;
+			break;
+		}
+	}
+
+	if (pipe == -1) {
+		DRM_ERROR("no such CRTC id\n");
+		return -EINVAL;
+	}
+
+	pipe_from_crtc_id->pipe = pipe;
+
+       return 0;
+}
+
 struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
 {
 	struct drm_crtc *crtc = NULL;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cf294302893..cd4b9c5f715 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -125,6 +125,8 @@ extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
 
 extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 						    struct drm_crtc *crtc);
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
 extern void intel_wait_for_vblank(struct drm_device *dev);
 extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
 extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 95962fa8398..8e1e92583fb 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -184,6 +184,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_I915_GEM_GET_TILING	0x22
 #define DRM_I915_GEM_GET_APERTURE 0x23
 #define DRM_I915_GEM_MMAP_GTT	0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25
 
 #define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
 #define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -219,6 +220,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_IOCTL_I915_GEM_SET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
 #define DRM_IOCTL_I915_GEM_GET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
 #define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
 
 /* Allow drivers to submit batchbuffers directly to hardware, relying
  * on the security mechanisms provided by hardware.
@@ -657,4 +659,12 @@ struct drm_i915_gem_get_aperture {
 	__u64 aper_available_size;
 };
 
+struct drm_i915_get_pipe_from_crtc_id {
+	/** ID of CRTC being requested **/
+	__u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	__u32 pipe;
+};
+
 #endif				/* _I915_DRM_H_ */
-- 
cgit v1.2.3


From 4e5b6d006b61b6b998e15da850d959520f811b4c Mon Sep 17 00:00:00 2001
From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Date: Fri, 8 May 2009 14:02:32 -0700
Subject: wimax/i2400m: fix device crash: fix optimization in
 _roq_queue_update_ws

When the i2400m receives data and the device indicates there has to be
reordering, we keep an sliding window implementation to sort the
packets before sending them to the network stack.

One of the "operations" that the device indicates is "queue a packet
and update the window start". When the queue is empty, this is
equivalent to "deliver the packet and update the window start".

That case was optimized in i2400m_roq_queue_update_ws() so that we
would not pointlessly queue and dequeue a packet. However, when the
optimization was active, it wasn't updating the window start. That
caused the reorder management code to get confused later on with what
seemed to be wrong reorder requests from the device.

Thus the fix implemented is to do the right thing and update the
window start in both cases, when the queue is empty (and the
optimization is done) and when not.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
---
 drivers/net/wimax/i2400m/rx.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 02419bfd64b..f9fc3890232 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -819,10 +819,9 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq,
 			roq_data = (struct i2400m_roq_data *) &skb->cb;
 			i2400m_net_erx(i2400m, skb, roq_data->cs);
 		}
-		else {
+		else
 			__i2400m_roq_queue(i2400m, roq, skb, sn, nsn);
-			__i2400m_roq_update_ws(i2400m, roq, sn + 1);
-		}
+		__i2400m_roq_update_ws(i2400m, roq, sn + 1);
 		i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS,
 				   old_ws, len, sn, nsn, roq->ws);
 	}
-- 
cgit v1.2.3


From 93f1cc609c702a83e44da51cabdd353b20c24f79 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Thu, 30 Apr 2009 18:16:44 +0000
Subject: powerpc: Fix mktree build error on Mac OS X host

The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails.  Change this to
"unsigned int".

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/mktree.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index 45d06a8c7cd..c2baae0a3d8 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -42,7 +42,7 @@ int main(int argc, char *argv[])
 {
 	int	in_fd, out_fd;
 	int	nblks, i;
-	uint	cksum, *cp;
+	unsigned int	cksum, *cp;
 	struct	stat	st;
 	boot_block_t	bt;
 
@@ -90,7 +90,7 @@ int main(int argc, char *argv[])
 
 	cksum = 0;
 	cp = (void *)&bt;
-	for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+	for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
 		cksum += *cp++;
 
 	/* Assume zImage is an ELF file, and skip the 64K header.
@@ -101,7 +101,7 @@ int main(int argc, char *argv[])
 		exit(4);
 	}
 
-	if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+	if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
 		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
 		exit(4);
 	}
@@ -125,8 +125,8 @@ int main(int argc, char *argv[])
 			perror("zImage read");
 			exit(5);
 		}
-		cp = (uint *)tmpbuf;
-		for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+		cp = (unsigned int *)tmpbuf;
+		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
 			cksum += *cp++;
 		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
 			perror("boot-image write");
-- 
cgit v1.2.3


From 397717c578a5e02cf76b6c99c68f50fee94b59f8 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell  x <sfr@canb.auug.org.au>
Date: Wed, 6 May 2009 14:07:52 +0000
Subject: powerpc/iseries: Fix pci breakage due to bad dma_data initialization

Commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code.  Commit
7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation.  Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.

Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/iseries/iommu.h | 4 ----
 arch/powerpc/platforms/iseries/iommu.c   | 6 +++++-
 arch/powerpc/platforms/iseries/pci.c     | 1 -
 3 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
index c59ee7e4bed..1b9692c6089 100644
--- a/arch/powerpc/include/asm/iseries/iommu.h
+++ b/arch/powerpc/include/asm/iseries/iommu.h
@@ -26,10 +26,6 @@ struct vio_dev;
 struct device_node;
 struct iommu_table;
 
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
-				       struct device_node *dn);
-
 /* Get table parameters from HV */
 extern void iommu_table_getparms_iSeries(unsigned long busno,
 		unsigned char slotno, unsigned char virtbus,
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index ff43f1fd834..40219823d9b 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -174,9 +174,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
 }
 
 
-void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
+static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
 {
 	struct iommu_table *tbl;
+	struct device_node *dn = pdev->sysdata;
 	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
 
@@ -194,6 +195,8 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
 		kfree(tbl);
 	pdev->dev.archdata.dma_data = pdn->iommu_table;
 }
+#else
+#define pci_dma_dev_setup_iseries	NULL
 #endif
 
 static struct iommu_table veth_iommu_table;
@@ -251,5 +254,6 @@ void iommu_init_early_iSeries(void)
 	ppc_md.tce_build = tce_build_iSeries;
 	ppc_md.tce_free  = tce_free_iSeries;
 
+	ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries;
 	set_pci_dma_ops(&dma_iommu_ops);
 }
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 02a634faedb..21cddc30220 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -444,7 +444,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	pdev->sysdata = node;
 	allocate_device_bars(pdev);
 	iseries_device_information(pdev, bus, *sub_bus);
-	iommu_devnode_init_iSeries(pdev, node);
 }
 
 /*
-- 
cgit v1.2.3


From e5fc948b11a9d0aee1cabe7c82726bc36d496875 Mon Sep 17 00:00:00 2001
From: Maynard Johnson <maynardj@us.ibm.com>
Date: Thu, 7 May 2009 05:48:32 +0000
Subject: powerpc: Fix oprofile sampling of marked events on POWER7

Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.

Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>").  In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt.  But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address.  With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP.  But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information.  Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions.  The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.

Signed-off-by: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/oprofile/op_model_power4.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 3e3d91f536e..80774092db7 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -26,6 +26,7 @@
 static unsigned long reset_value[OP_MAX_COUNTER];
 
 static int oprofile_running;
+static int use_slot_nums;
 
 /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
 static u32 mmcr0_val;
@@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_counter_config *ctr,
 	else
 		mmcr0_val |= MMCR0_PROBLEM_DISABLE;
 
+	if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+	    __is_processor(PV_970) || __is_processor(PV_970FX) ||
+	    __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
+	    __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+		use_slot_nums = 1;
+
 	return 0;
 }
 
@@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_regs *regs)
 
 	mmcra = mfspr(SPRN_MMCRA);
 
-	if (mmcra & MMCRA_SAMPLE_ENABLE) {
+	if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
 		slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
 		if (slot > 1)
 			pc += 4 * (slot - 1);
-- 
cgit v1.2.3


From 31207dab7d2e63795eb15823947bd2f7025b08e2 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 8 May 2009 12:08:20 +0000
Subject: powerpc/mpic: Fix incorrect allocation of interrupt rev-map

Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map.  However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0).  This causes us to always call
irq_find_mapping() from mpic_get_irq().

By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mpic.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 21b95670159..0efc12d1a3d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1057,13 +1057,6 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
 
-	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
-				       isu_size, &mpic_host_ops,
-				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
-	if (mpic->irqhost == NULL)
-		return NULL;
-
-	mpic->irqhost->host_data = mpic;
 	mpic->hc_irq = mpic_irq_chip;
 	mpic->hc_irq.typename = name;
 	if (flags & MPIC_PRIMARY)
@@ -1213,6 +1206,15 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
+	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+				       isu_size ? isu_size : mpic->num_sources,
+				       &mpic_host_ops,
+				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+	if (mpic->irqhost == NULL)
+		return NULL;
+
+	mpic->irqhost->host_data = mpic;
+
 	/* Display version */
 	switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
 	case 1:
-- 
cgit v1.2.3


From 49a849652513235a244dfbf5e58c54f796bd1148 Mon Sep 17 00:00:00 2001
From: Becky Bruce <beckyb@kernel.crashing.org>
Date: Fri, 8 May 2009 12:19:27 +0000
Subject: powerpc: Allow mem=x cmdline to work with 4G+

We're currently choking on mem=4g (and above) due to memory_limit
being specified as an unsigned long. Make memory_limit
phys_addr_t to fix this.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/system.h   | 2 +-
 arch/powerpc/kernel/machine_kexec.c | 4 ++--
 arch/powerpc/kernel/prom.c          | 8 ++++----
 arch/powerpc/mm/mem.c               | 2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index f612798e1c9..2b2420a4988 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -212,7 +212,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
 extern unsigned int rtas_data;
 extern int mem_init_done;	/* set on boot once kmalloc can be called */
 extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
+extern phys_addr_t memory_limit;
 extern unsigned long klimit;
 
 extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index d59e2b1bdcb..bb3d893a835 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -125,8 +125,8 @@ void __init reserve_crashkernel(void)
 	/* Crash kernel trumps memory limit */
 	if (memory_limit && memory_limit <= crashk_res.end) {
 		memory_limit = crashk_res.end + 1;
-		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
-				memory_limit);
+		printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
+		       (unsigned long long)memory_limit);
 	}
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 5ec6a9e2393..ce01ff2474d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -426,7 +426,7 @@ static int __init early_parse_mem(char *p)
 		return 1;
 
 	memory_limit = PAGE_ALIGN(memparse(p, &p));
-	DBG("memory limit = 0x%lx\n", memory_limit);
+	DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
 
 	return 0;
 }
@@ -1160,7 +1160,7 @@ static inline void __init phyp_dump_reserve_mem(void) {}
 
 void __init early_init_devtree(void *params)
 {
-	unsigned long limit;
+	phys_addr_t limit;
 
 	DBG(" -> early_init_devtree(%p)\n", params);
 
@@ -1204,7 +1204,7 @@ void __init early_init_devtree(void *params)
 
 	limit = memory_limit;
 	if (! limit) {
-		unsigned long memsize;
+		phys_addr_t memsize;
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
@@ -1218,7 +1218,7 @@ void __init early_init_devtree(void *params)
 	lmb_analyze();
 	lmb_dump_all();
 
-	DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f668fa9ba80..d0602a76bf7 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -57,7 +57,7 @@
 
 int init_bootmem_done;
 int mem_init_done;
-unsigned long memory_limit;
+phys_addr_t memory_limit;
 
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
-- 
cgit v1.2.3


From 37cd8ed90fc5b11941110d2d0cea6807f86d4787 Mon Sep 17 00:00:00 2001
From: Gerhard Stenzel <stenzel@de.ibm.com>
Date: Wed, 13 May 2009 05:50:46 +0000
Subject: powerpc/cell: Make ptcal more reliable

There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.

Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.

We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.

Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/ras.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5f961c464cc..296b5268754 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -122,12 +122,23 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
 
 	area->nid = nid;
 	area->order = order;
-	area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order);
+	area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
+					area->order);
 
-	if (!area->pages)
+	if (!area->pages) {
+		printk(KERN_WARNING "%s: no page on node %d\n",
+			__func__, area->nid);
 		goto out_free_area;
+	}
 
-	addr = __pa(page_address(area->pages));
+	/*
+	 * We move the ptcal area to the middle of the allocated
+	 * page, in order to avoid prefetches in memcpy and similar
+	 * functions stepping on it.
+	 */
+	addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1);
+	printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n",
+			__func__, area->nid, addr);
 
 	ret = -EIO;
 	if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid,
-- 
cgit v1.2.3


From 951c4df5b7703137bf4eee002d98d083fbc890cc Mon Sep 17 00:00:00 2001
From: Benjamin Krill <ben@codiert.org>
Date: Wed, 13 May 2009 05:56:54 +0000
Subject: serial/nwpserial: Fix wrong register read address and add interrupt
 acknowledge.

The receive interrupt routine checks the wrong register if the
receive fifo is empty. Further an explicit interrupt acknowledge
write is introduced. In some circumstances another interrupt was
issued.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/serial/nwpserial.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 32f3eaf0d26..9e150b19d72 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
 		ch = dcr_read(up->dcr_host, UART_RX);
 		if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
 			tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	} while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+	} while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
 
 	tty_flip_buffer_push(tty);
 	ret = IRQ_HANDLED;
 
+	/* clear interrupt */
+	dcr_write(up->dcr_host, UART_IIR, 1);
 out:
 	spin_unlock(&up->port.lock);
 	return ret;
-- 
cgit v1.2.3


From b173f03d7c48d3346541f26e0b29690dbadca279 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 14 May 2009 18:34:06 +0000
Subject: powerpc/pseries: Really fix the oprofile CPU type on pseries

My previous pach for fixing the oprofile CPU type got somewhat mismerged
(by my fault) when it collided with another related patch. This should
finally (fingers crossed) fix the whole thing.

We make sure we keep the -old- oprofile type and CPU type whenever
one of them was specified in the first pass through the function.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f9c40f869c6..3e33fb933d9 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1836,7 +1836,7 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
 		 * and, in that case, keep the current value for
 		 * oprofile_cpu_type.
 		 */
-		if (old.oprofile_cpu_type == NULL) {
+		if (old.oprofile_cpu_type != NULL) {
 			t->oprofile_cpu_type = old.oprofile_cpu_type;
 			t->oprofile_type = old.oprofile_type;
 		}
-- 
cgit v1.2.3


From ad892a63f64888a7b05eb2046febbcfbdd54dfcc Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 14 May 2009 20:16:47 +0000
Subject: powerpc: Fix PCI ROM access

A couple of issues crept in since about 2.6.27 related to accessing PCI
device ROMs on various powerpc machines.

First, historically, we don't allocate the ROM resource in the resource
tree. I'm not entirely certain of why, I susepct they often contained
garbage on x86 but it's hard to tell. This causes the current generic
code to always call pci_assign_resource() when trying to access the said
ROM from sysfs, which will try to re-assign some new address regardless
of what the ROM BAR was already set to at boot time. This can be a
problem on hypervisor platforms like pSeries where we aren't supposed
to move PCI devices around (and in fact probably can't).

Second, our code that generates the PCI tree from the OF device-tree
(instead of doing config space probing) which we mostly use on pseries
at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any
resource. That means that any attempt at re-assigning such a resource
with pci_assign_resource() would fail due to resource_alignment()
returning 0.

This fixes this by doing these two things:

 - The code that calculates resource flags based on the OF device-node
is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at
it also set IORESOURCE_READONLY for ROMs since we were lacking that too

 - We now allocate ROM resources as part of the resource tree. However
to limit the chances of nasty conflicts due to busted firmwares, we
only do it on the second pass of our two-passes allocation scheme,
so that all valid and enabled BARs get precedence.

This brings pSeries back the ability to access PCI ROMs via sysfs (and
thus initialize various video cards from X etc...).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-common.c | 21 ++++++++++++++-------
 arch/powerpc/kernel/pci_64.c     | 15 ++++++++++++---
 2 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 9c69e7e145c..4fee63cb53f 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1366,12 +1366,17 @@ static void __init pcibios_allocate_resources(int pass)
 
 	for_each_pci_dev(dev) {
 		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx < 6; idx++) {
+		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
 			r = &dev->resource[idx];
 			if (r->parent)		/* Already allocated */
 				continue;
 			if (!r->flags || (r->flags & IORESOURCE_UNSET))
 				continue;	/* Not assigned at all */
+			/* We only allocate ROMs on pass 1 just in case they
+			 * have been screwed up by firmware
+			 */
+			if (idx == PCI_ROM_RESOURCE )
+				disabled = 1;
 			if (r->flags & IORESOURCE_IO)
 				disabled = !(command & PCI_COMMAND_IO);
 			else
@@ -1382,17 +1387,19 @@ static void __init pcibios_allocate_resources(int pass)
 		if (pass)
 			continue;
 		r = &dev->resource[PCI_ROM_RESOURCE];
-		if (r->flags & IORESOURCE_ROM_ENABLE) {
+		if (r->flags) {
 			/* Turn the ROM off, leave the resource region,
 			 * but keep it unregistered.
 			 */
 			u32 reg;
-			pr_debug("PCI: Switching off ROM of %s\n",
-				 pci_name(dev));
-			r->flags &= ~IORESOURCE_ROM_ENABLE;
 			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-			pci_write_config_dword(dev, dev->rom_base_reg,
-					       reg & ~PCI_ROM_ADDRESS_ENABLE);
+			if (reg & PCI_ROM_ADDRESS_ENABLE) {
+				pr_debug("PCI: Switching off ROM of %s\n",
+					 pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_write_config_dword(dev, dev->rom_base_reg,
+						       reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
 		}
 	}
 }
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index be574fc0d92..96edb6f8bab 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -64,7 +64,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 	return def;
 }
 
-static unsigned int pci_parse_of_flags(u32 addr0)
+static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
 {
 	unsigned int flags = 0;
 
@@ -75,8 +75,17 @@ static unsigned int pci_parse_of_flags(u32 addr0)
 		if (addr0 & 0x40000000)
 			flags |= IORESOURCE_PREFETCH
 				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
+		/* Note: We don't know whether the ROM has been left enabled
+		 * by the firmware or not. We mark it as disabled (ie, we do
+		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+		 * do a config space read, it will be force-enabled if needed
+		 */
+		if (!bridge && (addr0 & 0xff) == 0x30)
+			flags |= IORESOURCE_READONLY;
 	} else if (addr0 & 0x01000000)
 		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+	if (flags)
+		flags |= IORESOURCE_SIZEALIGN;
 	return flags;
 }
 
@@ -95,7 +104,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
 		return;
 	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
 	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0]);
+		flags = pci_parse_of_flags(addrs[0], 0);
 		if (!flags)
 			continue;
 		base = of_read_number(&addrs[1], 2);
@@ -293,7 +302,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
 	}
 	i = 1;
 	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0]);
+		flags = pci_parse_of_flags(ranges[0], 1);
 		size = of_read_number(&ranges[6], 2);
 		if (flags == 0 || size == 0)
 			continue;
-- 
cgit v1.2.3


From 82075af6cb9b4918ab52a7100425b09fae6aafe3 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 14 May 2009 12:41:22 -0700
Subject: ASoC: davinci-pcm buildfixes

This is a buildfix for the DaVinci PCM code, resyncing it with
the version in the DaVinci tree.  The notable change is using
current EDMA interfaces, which recently merged to mainline.
(The older interfaces never made it into mainline.)

NOTE:  open issue, the DMA should be to/from SRAM; see chip
errata for more info.  The artifacts are extremely easy to
hear on DM355 hardware (not yet supported in mainline), but
don't seem as audible on DM6446 hardwaare (which does have
mainline support).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/davinci/davinci-pcm.c | 71 ++++++++++++++++++++++++-----------------
 1 file changed, 42 insertions(+), 29 deletions(-)

diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 7af3b5b3a53..a0599658848 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -22,6 +22,7 @@
 #include <sound/soc.h>
 
 #include <asm/dma.h>
+#include <mach/edma.h>
 
 #include "davinci-pcm.h"
 
@@ -51,7 +52,7 @@ struct davinci_runtime_data {
 	spinlock_t lock;
 	int period;		/* current DMA period */
 	int master_lch;		/* Master DMA channel */
-	int slave_lch;		/* Slave DMA channel */
+	int slave_lch;		/* linked parameter RAM reload slot */
 	struct davinci_pcm_dma_params *params;	/* DMA params */
 };
 
@@ -90,18 +91,18 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream)
 		dst_bidx = data_type;
 	}
 
-	davinci_set_dma_src_params(lch, src, INCR, W8BIT);
-	davinci_set_dma_dest_params(lch, dst, INCR, W8BIT);
-	davinci_set_dma_src_index(lch, src_bidx, 0);
-	davinci_set_dma_dest_index(lch, dst_bidx, 0);
-	davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+	edma_set_src(lch, src, INCR, W8BIT);
+	edma_set_dest(lch, dst, INCR, W8BIT);
+	edma_set_src_index(lch, src_bidx, 0);
+	edma_set_dest_index(lch, dst_bidx, 0);
+	edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
 
 	prtd->period++;
 	if (unlikely(prtd->period >= runtime->periods))
 		prtd->period = 0;
 }
 
-static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data)
+static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
 {
 	struct snd_pcm_substream *substream = data;
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
@@ -125,7 +126,7 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
-	int tcc = TCC_ANY;
+	struct edmacc_param p_ram;
 	int ret;
 
 	if (!dma_data)
@@ -134,22 +135,34 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 	prtd->params = dma_data;
 
 	/* Request master DMA channel */
-	ret = davinci_request_dma(prtd->params->channel, prtd->params->name,
+	ret = edma_alloc_channel(prtd->params->channel,
 				  davinci_pcm_dma_irq, substream,
-				  &prtd->master_lch, &tcc, EVENTQ_0);
-	if (ret)
+				  EVENTQ_0);
+	if (ret < 0)
 		return ret;
+	prtd->master_lch = ret;
 
-	/* Request slave DMA channel */
-	ret = davinci_request_dma(PARAM_ANY, "Link",
-				  NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0);
-	if (ret) {
-		davinci_free_dma(prtd->master_lch);
+	/* Request parameter RAM reload slot */
+	ret = edma_alloc_slot(EDMA_SLOT_ANY);
+	if (ret < 0) {
+		edma_free_channel(prtd->master_lch);
 		return ret;
 	}
-
-	/* Link slave DMA channel in loopback */
-	davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch);
+	prtd->slave_lch = ret;
+
+	/* Issue transfer completion IRQ when the channel completes a
+	 * transfer, then always reload from the same slot (by a kind
+	 * of loopback link).  The completion IRQ handler will update
+	 * the reload slot with a new buffer.
+	 *
+	 * REVISIT save p_ram here after setting up everything except
+	 * the buffer and its length (ccnt) ... use it as a template
+	 * so davinci_pcm_enqueue_dma() takes less time in IRQ.
+	 */
+	edma_read_slot(prtd->slave_lch, &p_ram);
+	p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch);
+	p_ram.link_bcntrld = prtd->slave_lch << 5;
+	edma_write_slot(prtd->slave_lch, &p_ram);
 
 	return 0;
 }
@@ -165,12 +178,12 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		davinci_start_dma(prtd->master_lch);
+		edma_start(prtd->master_lch);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		davinci_stop_dma(prtd->master_lch);
+		edma_stop(prtd->master_lch);
 		break;
 	default:
 		ret = -EINVAL;
@@ -185,14 +198,14 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
 {
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
-	struct paramentry_descriptor temp;
+	struct edmacc_param temp;
 
 	prtd->period = 0;
 	davinci_pcm_enqueue_dma(substream);
 
-	/* Get slave channel dma params for master channel startup */
-	davinci_get_dma_params(prtd->slave_lch, &temp);
-	davinci_set_dma_params(prtd->master_lch, &temp);
+	/* Copy self-linked parameter RAM entry into master channel */
+	edma_read_slot(prtd->slave_lch, &temp);
+	edma_write_slot(prtd->master_lch, &temp);
 
 	return 0;
 }
@@ -208,7 +221,7 @@ davinci_pcm_pointer(struct snd_pcm_substream *substream)
 
 	spin_lock(&prtd->lock);
 
-	davinci_dma_getposition(prtd->master_lch, &src, &dst);
+	edma_get_position(prtd->master_lch, &src, &dst);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		count = src - runtime->dma_addr;
 	else
@@ -253,10 +266,10 @@ static int davinci_pcm_close(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd = runtime->private_data;
 
-	davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch);
+	edma_unlink(prtd->slave_lch);
 
-	davinci_free_dma(prtd->slave_lch);
-	davinci_free_dma(prtd->master_lch);
+	edma_free_slot(prtd->slave_lch);
+	edma_free_channel(prtd->master_lch);
 
 	kfree(prtd);
 
-- 
cgit v1.2.3


From a62114cb90a351016121bca02e69d6a9e24afa0e Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 14 May 2009 12:47:42 -0700
Subject: ASoC: DaVinci I2S updates

This resyncs the DaVinci I2S code with the version in the DaVinci
tree.  The behavioral change uses updated clock interfaces which
recently merged to mainline.  Two other changes include adding a
comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in
order to support more boards than just the DM644x EVM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/davinci/davinci-i2s.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index ffdb9439d3d..b1ea52fc83c 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -24,6 +24,26 @@
 
 #include "davinci-pcm.h"
 
+
+/*
+ * NOTE:  terminology here is confusing.
+ *
+ *  - This driver supports the "Audio Serial Port" (ASP),
+ *    found on dm6446, dm355, and other DaVinci chips.
+ *
+ *  - But it labels it a "Multi-channel Buffered Serial Port"
+ *    (McBSP) as on older chips like the dm642 ... which was
+ *    backward-compatible, possibly explaining that confusion.
+ *
+ *  - OMAP chips have a controller called McBSP, which is
+ *    incompatible with the DaVinci flavor of McBSP.
+ *
+ *  - Newer DaVinci chips have a controller called McASP,
+ *    incompatible with ASP and with either McBSP.
+ *
+ * In short:  this uses ASP to implement I2S, not McBSP.
+ * And it won't be the only DaVinci implemention of I2S.
+ */
 #define DAVINCI_MCBSP_DRR_REG	0x00
 #define DAVINCI_MCBSP_DXR_REG	0x04
 #define DAVINCI_MCBSP_SPCR_REG	0x08
@@ -421,7 +441,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+	struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
 	struct davinci_mcbsp_dev *dev;
 	struct resource *mem, *ioarea;
 	struct evm_snd_platform_data *pdata;
@@ -448,7 +468,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
 
 	cpu_dai->private_data = dev;
 
-	dev->clk = clk_get(&pdev->dev, "McBSPCLK");
+	dev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		ret = -ENODEV;
 		goto err_free_mem;
@@ -483,7 +503,7 @@ static void davinci_i2s_remove(struct platform_device *pdev,
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+	struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
 	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
 	struct resource *mem;
 
-- 
cgit v1.2.3


From f492ec9f02908579353e31949855f86909a5af14 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 14 May 2009 13:01:59 -0700
Subject: ASoC: DaVinci EVM board support buildfixes

This is a build fix, resyncing the DaVinci EVM ASoC board code
with the version in the DaVinci tree.  That resync includes
support for the DM355 EVM, although that board isn't yet in
mainline.

(NOTE:  also includes a bugfix to the platform_add_resources
call, recently sent by Chaithrika U S <chaithrika@ti.com> but
not yet merged into the DaVinci tree.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-davinci/include/mach/asp.h | 25 +++++++++++++
 sound/soc/davinci/Kconfig                |  7 ++--
 sound/soc/davinci/davinci-evm.c          | 63 ++++++++++++++++++++++++++------
 3 files changed, 81 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/mach-davinci/include/mach/asp.h

diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
new file mode 100644
index 00000000000..e0abc437d79
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index bd7392c9657..411a710be66 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -10,13 +10,14 @@ config SND_DAVINCI_SOC_I2S
 	tristate
 
 config SND_DAVINCI_SOC_EVM
-	tristate "SoC Audio support for DaVinci EVM"
-	depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM
+	tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
+	depends on SND_DAVINCI_SOC
+	depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM
 	select SND_DAVINCI_SOC_I2S
 	select SND_SOC_TLV320AIC3X
 	help
 	  Say Y if you want to add support for SoC audio on TI
-	  DaVinci EVM platform.
+	  DaVinci DM6446 or DM355 EVM platforms.
 
 config SND_DAVINCI_SOC_SFFSDR
 	tristate "SoC Audio support for SFFSDR"
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 9b90b347007..58fd1cbedd8 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -20,7 +20,11 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/dma.h>
-#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/asp.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
 
 #include "../codecs/tlv320aic3x.h"
 #include "davinci-pcm.h"
@@ -150,7 +154,7 @@ static struct snd_soc_card snd_soc_card_evm = {
 
 /* evm audio private data */
 static struct aic3x_setup_data evm_aic3x_setup = {
-	.i2c_bus = 0,
+	.i2c_bus = 1,
 	.i2c_address = 0x1b,
 };
 
@@ -161,36 +165,73 @@ static struct snd_soc_device evm_snd_devdata = {
 	.codec_data = &evm_aic3x_setup,
 };
 
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
 static struct resource evm_snd_resources[] = {
 	{
-		.start = DAVINCI_MCBSP_BASE,
-		.end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+		.start = DAVINCI_ASP0_BASE,
+		.end = DAVINCI_ASP0_BASE + SZ_8K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };
 
 static struct evm_snd_platform_data evm_snd_data = {
-	.tx_dma_ch	= DM644X_DMACH_MCBSP_TX,
-	.rx_dma_ch	= DM644X_DMACH_MCBSP_RX,
+	.tx_dma_ch	= DAVINCI_DMA_ASP0_TX,
+	.rx_dma_ch	= DAVINCI_DMA_ASP0_RX,
+};
+
+/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+static struct resource dm335evm_snd_resources[] = {
+	{
+		.start = DAVINCI_ASP1_BASE,
+		.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct evm_snd_platform_data dm335evm_snd_data = {
+	.tx_dma_ch	= DAVINCI_DMA_ASP1_TX,
+	.rx_dma_ch	= DAVINCI_DMA_ASP1_RX,
 };
 
 static struct platform_device *evm_snd_device;
 
 static int __init evm_init(void)
 {
+	struct resource *resources;
+	unsigned num_resources;
+	struct evm_snd_platform_data *data;
+	int index;
 	int ret;
 
-	evm_snd_device = platform_device_alloc("soc-audio", 0);
+	if (machine_is_davinci_evm()) {
+		davinci_cfg_reg(DM644X_MCBSP);
+
+		resources = evm_snd_resources;
+		num_resources = ARRAY_SIZE(evm_snd_resources);
+		data = &evm_snd_data;
+		index = 0;
+	} else if (machine_is_davinci_dm355_evm()) {
+		/* we don't use ASP1 IRQs, or we'd need to mux them ... */
+		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+		resources = dm335evm_snd_resources;
+		num_resources = ARRAY_SIZE(dm335evm_snd_resources);
+		data = &dm335evm_snd_data;
+		index = 1;
+	} else
+		return -EINVAL;
+
+	evm_snd_device = platform_device_alloc("soc-audio", index);
 	if (!evm_snd_device)
 		return -ENOMEM;
 
 	platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
 	evm_snd_devdata.dev = &evm_snd_device->dev;
-	platform_device_add_data(evm_snd_device, &evm_snd_data,
-				 sizeof(evm_snd_data));
+	platform_device_add_data(evm_snd_device, data, sizeof(*data));
 
-	ret = platform_device_add_resources(evm_snd_device, evm_snd_resources,
-					    ARRAY_SIZE(evm_snd_resources));
+	ret = platform_device_add_resources(evm_snd_device, resources,
+			num_resources);
 	if (ret) {
 		platform_device_put(evm_snd_device);
 		return ret;
-- 
cgit v1.2.3


From cd17cbfda004fe5f406c01b318c6378d9895896f Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Fri, 15 May 2009 11:32:24 +0200
Subject: Revert "mm: add /proc controls for pdflush threads"

This reverts commit fafd688e4c0c34da0f3de909881117d374e4c7af.

Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 Documentation/sysctl/vm.txt | 28 ----------------------------
 include/linux/writeback.h   |  2 --
 kernel/sysctl.c             | 23 -----------------------
 mm/pdflush.c                | 31 ++++++++++++-------------------
 4 files changed, 12 insertions(+), 72 deletions(-)

diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index b716d33912d..c302ddf629a 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 9c1ed1fb6dd..93445477f86 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -168,8 +168,6 @@ void writeback_set_ratelimit(void);
 /* pdflush.c */
 extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
 				   read-only. */
-extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
-extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
 
 
 #endif		/* WRITEBACK_H */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ea78fa101ad..b2970d56fb7 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -101,7 +101,6 @@ static int __maybe_unused one = 1;
 static int __maybe_unused two = 2;
 static unsigned long one_ul = 1;
 static int one_hundred = 100;
-static int one_thousand = 1000;
 
 /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
 static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
@@ -1033,28 +1032,6 @@ static struct ctl_table vm_table[] = {
 		.mode		= 0444 /* read-only*/,
 		.proc_handler	= &proc_dointvec,
 	},
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "nr_pdflush_threads_min",
-		.data		= &nr_pdflush_threads_min,
-		.maxlen		= sizeof nr_pdflush_threads_min,
-		.mode		= 0644 /* read-write */,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
-		.extra1		= &one,
-		.extra2		= &nr_pdflush_threads_max,
-	},
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "nr_pdflush_threads_max",
-		.data		= &nr_pdflush_threads_max,
-		.maxlen		= sizeof nr_pdflush_threads_max,
-		.mode		= 0644 /* read-write */,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
-		.extra1		= &nr_pdflush_threads_min,
-		.extra2		= &one_thousand,
-	},
 	{
 		.ctl_name	= VM_SWAPPINESS,
 		.procname	= "swappiness",
diff --git a/mm/pdflush.c b/mm/pdflush.c
index f2caf96993f..235ac440c44 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -57,14 +57,6 @@ static DEFINE_SPINLOCK(pdflush_lock);
  */
 int nr_pdflush_threads = 0;
 
-/*
- * The max/min number of pdflush threads. R/W by sysctl at
- * /proc/sys/vm/nr_pdflush_threads_max/min
- */
-int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS;
-int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS;
-
-
 /*
  * The time at which the pdflush thread pool last went empty
  */
@@ -76,7 +68,7 @@ static unsigned long last_empty_jifs;
  * Thread pool management algorithm:
  * 
  * - The minimum and maximum number of pdflush instances are bound
- *   by nr_pdflush_threads_min and nr_pdflush_threads_max.
+ *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
  * 
  * - If there have been no idle pdflush instances for 1 second, create
  *   a new one.
@@ -142,13 +134,14 @@ static int __pdflush(struct pdflush_work *my_work)
 		 * To throttle creation, we reset last_empty_jifs.
 		 */
 		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
-			if (list_empty(&pdflush_list) &&
-			    nr_pdflush_threads < nr_pdflush_threads_max) {
-				last_empty_jifs = jiffies;
-				nr_pdflush_threads++;
-				spin_unlock_irq(&pdflush_lock);
-				start_one_pdflush_thread();
-				spin_lock_irq(&pdflush_lock);
+			if (list_empty(&pdflush_list)) {
+				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+					last_empty_jifs = jiffies;
+					nr_pdflush_threads++;
+					spin_unlock_irq(&pdflush_lock);
+					start_one_pdflush_thread();
+					spin_lock_irq(&pdflush_lock);
+				}
 			}
 		}
 
@@ -160,7 +153,7 @@ static int __pdflush(struct pdflush_work *my_work)
 		 */
 		if (list_empty(&pdflush_list))
 			continue;
-		if (nr_pdflush_threads <= nr_pdflush_threads_min)
+		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
 			continue;
 		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
 		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
@@ -266,9 +259,9 @@ static int __init pdflush_init(void)
 	 * Pre-set nr_pdflush_threads...  If we fail to create,
 	 * the count will be decremented.
 	 */
-	nr_pdflush_threads = nr_pdflush_threads_min;
+	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
 
-	for (i = 0; i < nr_pdflush_threads_min; i++)
+	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
 		start_one_pdflush_thread();
 	return 0;
 }
-- 
cgit v1.2.3


From ceec1c33c36e4783cba41416f327f4bbc05218c3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 17 Apr 2009 12:29:22 +0100
Subject: [ARM] nwfpe: Add decleration for ExtendedCPDO

Add header file decleration for 'ExtendedCPDO' in fpa11.h
to stop the following sparse warning:

extended_cpdo.c:90:14: warning: symbol 'ExtendedCPDO' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/nwfpe/fpa11.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 386cbd13eaf..d3a6f9298e9 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
 extern unsigned int DoubleCPDO(struct roundingData *roundData,
 			       const unsigned int opcode, FPREG * rFd);
 
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+				 const unsigned int opcode, FPREG * rFd);
+
 #endif
-- 
cgit v1.2.3


From 3ea385f061d08a9509a884e347ad1007bb6c3c66 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 17 Apr 2009 12:21:56 +0100
Subject: [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning

The symbol 'floatx80_is_nan' prototype was defined
locally in fpa11_cprt.c when it was built outside the
file in softfloat-specialisze.

Move this into softfloat.h to fix the following sparse
warning:

softfloat-specialize:276:6: warning: symbol 'floatx80_is_nan' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/nwfpe/fpa11_cprt.c | 4 ----
 arch/arm/nwfpe/softfloat.h  | 2 ++
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
index 9843dc53304..31c4eeec18b 100644
--- a/arch/arm/nwfpe/fpa11_cprt.c
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -27,10 +27,6 @@
 #include "fpmodule.inl"
 #include "softfloat.h"
 
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
 
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 260fe29d73f..13e479c5da5 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
 char floatx80_lt_quiet( floatx80, floatx80 );
 char floatx80_is_signaling_nan( floatx80 );
 
+extern flag floatx80_is_nan(floatx80);
+
 #endif
 
 static inline flag extractFloat32Sign(float32 a)
-- 
cgit v1.2.3


From 364b5b7b1d793a7f98be55b6b154716dcae78dfc Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 13 May 2009 21:56:59 -0500
Subject: sysrq, intel_fb: fix sysrq g collision

Commit 79e539453b34e35f39299a899d263b0a1f1670bd introduced a
regression where you cannot use sysrq 'g' to enter kgdb.  The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics.  The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.

This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/char/sysrq.c            | 4 ++--
 drivers/gpu/drm/i915/intel_fb.c | 4 ++--
 kernel/kgdb.c                   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index b0a6a3e5192..d6a807f4077 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -406,7 +406,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	&sysrq_showlocks_op,		/* d */
 	&sysrq_term_op,			/* e */
 	&sysrq_moom_op,			/* f */
-	/* g: May be registered by ppc for kgdb */
+	/* g: May be registered for the kernel debugger */
 	NULL,				/* g */
 	NULL,				/* h - reserved for help */
 	&sysrq_kill_op,			/* i */
@@ -431,7 +431,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	&sysrq_sync_op,			/* s */
 	&sysrq_showstate_op,		/* t */
 	&sysrq_mountro_op,		/* u */
-	/* v: May be registered at init time by SMP VOYAGER */
+	/* v: May be registered for frame buffer console restore */
 	NULL,				/* v */
 	&sysrq_showstate_blocked_op,	/* w */
 	/* x: May be registered on ppc/powerpc for xmon */
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 3e094beecb9..e4652dcdd9b 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -864,7 +864,7 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
 
 static struct sysrq_key_op sysrq_intelfb_restore_op = {
         .handler = intelfb_sysrq,
-        .help_msg = "force-fb(G)",
+        .help_msg = "force-fb(V)",
         .action_msg = "Restore framebuffer console",
 };
 
@@ -898,7 +898,7 @@ int intelfb_probe(struct drm_device *dev)
 		ret = intelfb_single_fb_probe(dev);
 	}
 
-	register_sysrq_key('g', &sysrq_intelfb_restore_op);
+	register_sysrq_key('v', &sysrq_intelfb_restore_op);
 
 	return ret;
 }
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index e4dcfb2272a..9147a3190c9 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -1583,8 +1583,8 @@ static void sysrq_handle_gdb(int key, struct tty_struct *tty)
 
 static struct sysrq_key_op sysrq_gdb_op = {
 	.handler	= sysrq_handle_gdb,
-	.help_msg	= "Gdb",
-	.action_msg	= "GDB",
+	.help_msg	= "debug(G)",
+	.action_msg	= "DEBUG",
 };
 #endif
 
-- 
cgit v1.2.3


From 33ab1979bc9f719213bc3f392c8fd9d012e4f4e9 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 11 Feb 2009 18:46:32 -0600
Subject: kgdb,i386: use address that SP register points to in the exception
 frame

The treatment of the SP register is different on x86_64 and i386.
This is a regression fix that lived outside the mainline kernel from
2.6.27 to now.  The regression was a result of the original merge
consolidation of the i386 and x86_64 archs to x86.

The incorrectly reported SP on i386 prevented stack tracebacks from
working correctly in gdb.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 arch/x86/kernel/kgdb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index eedfaebe106..b1f4dffb919 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -88,6 +88,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_SS]	= __KERNEL_DS;
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
+	gdb_regs[GDB_SP]	= (int)&regs->sp;
 #else
 	gdb_regs[GDB_R8]	= regs->r8;
 	gdb_regs[GDB_R9]	= regs->r9;
@@ -100,8 +101,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs32[GDB_PS]	= regs->flags;
 	gdb_regs32[GDB_CS]	= regs->cs;
 	gdb_regs32[GDB_SS]	= regs->ss;
-#endif
 	gdb_regs[GDB_SP]	= regs->sp;
+#endif
 }
 
 /**
-- 
cgit v1.2.3


From d34a792da969a00b0f653c512414411760f55a20 Mon Sep 17 00:00:00 2001
From: Frank Rowand <frank.rowand@am.sony.com>
Date: Fri, 15 May 2009 07:56:25 -0500
Subject: kgdb: gdb documentation fix

gdb command "set remote debug 1" is not valid, change to correct command.

Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
 Documentation/DocBook/kgdb.tmpl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 372dec20c8d..5cff41a5fa7 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">
-- 
cgit v1.2.3


From 2ec0ae3acec47f628179ee95fe2c4da01b5e9fc4 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Fri, 15 May 2009 09:07:28 -0400
Subject: ext4: Fix race in ext4_inode_info.i_cached_extent

If two CPU's simultaneously call ext4_ext_get_blocks() at the same
time, there is nothing protecting the i_cached_extent structure from
being used and updated at the same time.  This could potentially cause
the wrong location on disk to be read or written to, including
potentially causing the corruption of the block group descriptors
and/or inode table.

This bug has been in the ext4 code since almost the very beginning of
ext4's development.  Fortunately once the data is stored in the page
cache cache, ext4_get_blocks() doesn't need to be called, so trying to
replicate this problem to the point where we could identify its root
cause was *extremely* difficult.  Many thanks to Kevin Shanahan for
working over several months to be able to reproduce this easily so we
could finally nail down the cause of the corruption.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
---
 fs/ext4/extents.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 172656c2a3b..e3a55eb8b26 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1841,11 +1841,13 @@ ext4_ext_put_in_cache(struct inode *inode, ext4_lblk_t block,
 {
 	struct ext4_ext_cache *cex;
 	BUG_ON(len == 0);
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
 	cex = &EXT4_I(inode)->i_cached_extent;
 	cex->ec_type = type;
 	cex->ec_block = block;
 	cex->ec_len = len;
 	cex->ec_start = start;
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 }
 
 /*
@@ -1902,12 +1904,17 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
 			struct ext4_extent *ex)
 {
 	struct ext4_ext_cache *cex;
+	int ret = EXT4_EXT_CACHE_NO;
 
+	/* 
+	 * We borrow i_block_reservation_lock to protect i_cached_extent
+	 */
+	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
 	cex = &EXT4_I(inode)->i_cached_extent;
 
 	/* has cache valid data? */
 	if (cex->ec_type == EXT4_EXT_CACHE_NO)
-		return EXT4_EXT_CACHE_NO;
+		goto errout;
 
 	BUG_ON(cex->ec_type != EXT4_EXT_CACHE_GAP &&
 			cex->ec_type != EXT4_EXT_CACHE_EXTENT);
@@ -1918,11 +1925,11 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
 		ext_debug("%u cached by %u:%u:%llu\n",
 				block,
 				cex->ec_block, cex->ec_len, cex->ec_start);
-		return cex->ec_type;
+		ret = cex->ec_type;
 	}
-
-	/* not in cache */
-	return EXT4_EXT_CACHE_NO;
+errout:
+	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+	return ret;
 }
 
 /*
-- 
cgit v1.2.3


From f36dd6e7c0c04a056d3441185a17e5d4e3723192 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu, 7 May 2009 15:07:47 +0200
Subject: [ARM] S3C64XX: GPIO include cleanup

Cleanup arm/plat-s3c64xx/include/plat/gpio-bank-h.h include file.
Using shift-left operation with value >32 is a bad habit.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
index 81549516572..2ba1767512d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
@@ -61,14 +61,14 @@
 #define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
 #define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
 
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
 
+#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)
-- 
cgit v1.2.3


From beb9f4ed22ee618ffcf5064ff7d5ca4cfc83104b Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu, 7 May 2009 15:07:41 +0200
Subject: [ARM] S3C64XX: fix GPIO debug

Fix compilation bug when debug was enabled

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/gpiolib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index ee9188add8f..78ee52cffc9 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -57,7 +57,7 @@
 #if 1
 #define gpio_dbg(x...) do { } while(0)
 #else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
 #endif
 
 /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
-- 
cgit v1.2.3


From 871fcd7cf791b853ae044f813db94caefbf66725 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 15 May 2009 14:20:53 +0100
Subject: [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c

Fix unused code warning in arch/arm/plat-s3c24xx/dma.c if there
is no PM support enabled. The function to_dma_chan() should
be marked inline so that the compiler will eliminate it without
warning if it isn't used.

arch/arm/plat-s3c24xx/dma.c:1239: warning: 'to_dma_chan' defined but not used

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index aee2aeb46c6..07326f63236 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
 
 EXPORT_SYMBOL(s3c2410_dma_getposition);
 
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
 {
 	return container_of(dev, struct s3c2410_dma_chan, dev);
 }
-- 
cgit v1.2.3


From a8af6de00fafed316fea8f39d87c7e8e19ec1ea0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 15 May 2009 14:57:09 +0100
Subject: [ARM] S3C2410: mach-bast.c registering i2c data too early

The BAST support code is calling s3c_i2c0_set_platdata() from
the map_io() entry, instead of the bast_init() code. This causes
the registration to fail due to kmalloc() not being available
at the time.

This fixes the following error:
s3c_i2c0_set_platdata: no memory for platform data

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 4389c160f7d..8637dea5e15 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -588,8 +588,6 @@ static void __init bast_map_io(void)
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
 
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
@@ -602,6 +600,7 @@ static void __init bast_init(void)
 	sysdev_class_register(&bast_pm_sysclass);
 	sysdev_register(&bast_pm_sysdev);
 
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
-- 
cgit v1.2.3


From 3ac19bb443255579b30f05af5e688b6c73b1bb91 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 15 May 2009 15:21:57 +0100
Subject: [ARM] S3C: Do not set clk->owner field if unset

The s3c24xx_register_clock() function has been doing a test
on clk->owner to see if it is NULL, and then setting itself
as the owner if clk->owner == NULL.

This is not needed, arch/arm/plat-s3c/clock.c cannot be
compiled as a module, and even if it was, it should not be
playing with this field if it being registered from somewhere
else.

The best course of action is to remove this bit of
code completely.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/clock.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index b6be76e2fe5..4d01ef1a25d 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
 
 int s3c24xx_register_clock(struct clk *clk)
 {
-	clk->owner = THIS_MODULE;
-
 	if (clk->enable == NULL)
 		clk->enable = clk_null_enable;
 
-- 
cgit v1.2.3


From 1f71ebedb3f8ce9108978168759c8551d873a912 Mon Sep 17 00:00:00 2001
From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Date: Thu, 14 May 2009 19:38:24 -0700
Subject: devpts: correctly set default options

devpts_get_sb() calls memset(0) to clear mount options and calls
parse_mount_options() if user specified any mount options.

The memset(0) is bogus since the 'mode' and 'ptmxmode' options are
non-zero by default.  parse_mount_options() restores options to default
anyway and can properly deal with NULL mount options.

So in devpts_get_sb() remove memset(0) and call parse_mount_options() even
for NULL mount options.

Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448.

Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Reported-by: Eric Paris <eparis@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/devpts/inode.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 21165cf934f..c68edb96944 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -90,6 +90,15 @@ static inline struct super_block *pts_sb_from_inode(struct inode *inode)
 #define PARSE_MOUNT	0
 #define PARSE_REMOUNT	1
 
+/*
+ * parse_mount_options():
+ * 	Set @opts to mount options specified in @data. If an option is not
+ * 	specified in @data, set it to its default value. The exception is
+ * 	'newinstance' option which can only be set/cleared on a mount (i.e.
+ * 	cannot be changed during remount).
+ *
+ * Note: @data may be NULL (in which case all options are set to default).
+ */
 static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts)
 {
 	char *p;
@@ -355,12 +364,9 @@ static int devpts_get_sb(struct file_system_type *fs_type,
 	struct pts_mount_opts opts;
 	struct super_block *s;
 
-	memset(&opts, 0, sizeof(opts));
-	if (data) {
-		error = parse_mount_options(data, PARSE_MOUNT, &opts);
-		if (error)
-			return error;
-	}
+	error = parse_mount_options(data, PARSE_MOUNT, &opts);
+	if (error)
+		return error;
 
 	if (opts.newinstance)
 		s = sget(fs_type, NULL, set_anon_super, NULL);
-- 
cgit v1.2.3


From 88fc86c283d9c3854e67e4155808027bc2519eb6 Mon Sep 17 00:00:00 2001
From: GeunSik Lim <leemgs1@gmail.com>
Date: Thu, 14 May 2009 17:23:38 +0900
Subject: tracing: Append prompt in /debug/tracing/README file

append prompt in /debug/tracing/README file.

This is trivial issue. Fix typo Mini Howto file(README) for ftrace.

[ Impact: cleanup ]

Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: williams <williams@redhat.com>
LKML-Reference: <1242289418.31161.45.camel@centos51>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index a884c09006c..cda81ec58d9 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2380,7 +2380,7 @@ static const char readme_msg[] =
 	"# echo print-parent > /debug/tracing/trace_options\n"
 	"# echo 1 > /debug/tracing/tracing_enabled\n"
 	"# cat /debug/tracing/trace > /tmp/trace.txt\n"
-	"echo 0 > /debug/tracing/tracing_enabled\n"
+	"# echo 0 > /debug/tracing/tracing_enabled\n"
 ;
 
 static ssize_t
-- 
cgit v1.2.3


From 67651ee5710c45ea62fae68b768d65395ccf47c2 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Wed, 8 Apr 2009 16:02:18 -0400
Subject: [libata] sata_sx4: convert to new exception handling methods

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_sx4.c | 166 +++++++++++++++++++++++++++++++++++--------------
 1 file changed, 121 insertions(+), 45 deletions(-)

diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index dce3dccced3..1ce98afa69b 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -213,8 +213,9 @@ struct pdc_host_priv {
 
 
 static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
+static void pdc_freeze(struct ata_port *ap);
+static void pdc_thaw(struct ata_port *ap);
 static int pdc_port_start(struct ata_port *ap);
 static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -233,6 +234,10 @@ static void pdc20621_put_to_dimm(struct ata_host *host,
 				 void *psource, u32 offset, u32 size);
 static void pdc20621_irq_clear(struct ata_port *ap);
 static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+			 unsigned long deadline);
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
 
 
 static struct scsi_host_template pdc_sata_sht = {
@@ -243,20 +248,24 @@ static struct scsi_host_template pdc_sata_sht = {
 
 /* TODO: inherit from base port_ops after converting to new EH */
 static struct ata_port_operations pdc_20621_ops = {
-	.sff_tf_load		= pdc_tf_load_mmio,
-	.sff_tf_read		= ata_sff_tf_read,
-	.sff_check_status	= ata_sff_check_status,
-	.sff_exec_command	= pdc_exec_command_mmio,
-	.sff_dev_select		= ata_sff_dev_select,
-	.phy_reset		= pdc_20621_phy_reset,
+	.inherits		= &ata_sff_port_ops,
+
+	.check_atapi_dma	= pdc_check_atapi_dma,
 	.qc_prep		= pdc20621_qc_prep,
 	.qc_issue		= pdc20621_qc_issue,
-	.qc_fill_rtf		= ata_sff_qc_fill_rtf,
-	.sff_data_xfer		= ata_sff_data_xfer,
-	.eng_timeout		= pdc_eng_timeout,
-	.sff_irq_clear		= pdc20621_irq_clear,
-	.sff_irq_on		= ata_sff_irq_on,
+
+	.freeze			= pdc_freeze,
+	.thaw			= pdc_thaw,
+	.softreset		= pdc_softreset,
+	.error_handler		= pdc_error_handler,
+	.lost_interrupt		= ATA_OP_NULL,
+	.post_internal_cmd	= pdc_post_internal_cmd,
+
 	.port_start		= pdc_port_start,
+
+	.sff_tf_load		= pdc_tf_load_mmio,
+	.sff_exec_command	= pdc_exec_command_mmio,
+	.sff_irq_clear		= pdc20621_irq_clear,
 };
 
 static const struct ata_port_info pdc_port_info[] = {
@@ -310,14 +319,6 @@ static int pdc_port_start(struct ata_port *ap)
 	return 0;
 }
 
-static void pdc_20621_phy_reset(struct ata_port *ap)
-{
-	VPRINTK("ENTER\n");
-	ap->cbl = ATA_CBL_SATA;
-	ata_port_probe(ap);
-	ata_bus_reset(ap);
-}
-
 static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
 				   unsigned int portno,
 					   unsigned int total_len)
@@ -859,40 +860,115 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
 	return IRQ_RETVAL(handled);
 }
 
-static void pdc_eng_timeout(struct ata_port *ap)
+static void pdc_freeze(struct ata_port *ap)
 {
-	u8 drv_stat;
-	struct ata_host *host = ap->host;
-	struct ata_queued_cmd *qc;
-	unsigned long flags;
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
+	u32 tmp;
 
-	DPRINTK("ENTER\n");
+	/* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */
 
-	spin_lock_irqsave(&host->lock, flags);
+	tmp = readl(mmio + PDC_CTLSTAT);
+	tmp |= PDC_MASK_INT;
+	tmp &= ~PDC_DMA_ENABLE;
+	writel(tmp, mmio + PDC_CTLSTAT);
+	readl(mmio + PDC_CTLSTAT); /* flush */
+}
 
-	qc = ata_qc_from_tag(ap, ap->link.active_tag);
+static void pdc_thaw(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
+	void __iomem *mmio_base;
+	u32 tmp;
 
-	switch (qc->tf.protocol) {
-	case ATA_PROT_DMA:
-	case ATA_PROT_NODATA:
-		ata_port_printk(ap, KERN_ERR, "command timeout\n");
-		qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
-		break;
+	/* FIXME: start HDMA engine, if zero ATA engines running */
 
-	default:
-		drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+	/* reading SEQ mask register clears IRQ */
+	mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
+	readl(mmio_base + PDC_20621_SEQMASK);
 
-		ata_port_printk(ap, KERN_ERR,
-				"unknown timeout, cmd 0x%x stat 0x%x\n",
-				qc->tf.command, drv_stat);
+	/* turn IRQ back on */
+	tmp = readl(mmio + PDC_CTLSTAT);
+	tmp &= ~PDC_MASK_INT;
+	writel(tmp, mmio + PDC_CTLSTAT);
+	readl(mmio + PDC_CTLSTAT); /* flush */
+}
 
-		qc->err_mask |= ac_err_mask(drv_stat);
-		break;
+static void pdc_reset_port(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+	unsigned int i;
+	u32 tmp;
+
+	/* FIXME: handle HDMA copy engine */
+
+	for (i = 11; i > 0; i--) {
+		tmp = readl(mmio);
+		if (tmp & PDC_RESET)
+			break;
+
+		udelay(100);
+
+		tmp |= PDC_RESET;
+		writel(tmp, mmio);
 	}
 
-	spin_unlock_irqrestore(&host->lock, flags);
-	ata_eh_qc_complete(qc);
-	DPRINTK("EXIT\n");
+	tmp &= ~PDC_RESET;
+	writel(tmp, mmio);
+	readl(mmio);	/* flush */
+}
+
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+			 unsigned long deadline)
+{
+	pdc_reset_port(link->ap);
+	return ata_sff_softreset(link, class, deadline);
+}
+
+static void pdc_error_handler(struct ata_port *ap)
+{
+	if (!(ap->pflags & ATA_PFLAG_FROZEN))
+		pdc_reset_port(ap);
+
+	ata_std_error_handler(ap);
+}
+
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	/* make DMA engine forget about the failed command */
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		pdc_reset_port(ap);
+}
+
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	u8 *scsicmd = qc->scsicmd->cmnd;
+	int pio = 1; /* atapi dma off by default */
+
+	/* Whitelist commands that may use DMA. */
+	switch (scsicmd[0]) {
+	case WRITE_12:
+	case WRITE_10:
+	case WRITE_6:
+	case READ_12:
+	case READ_10:
+	case READ_6:
+	case 0xad: /* READ_DVD_STRUCTURE */
+	case 0xbe: /* READ_CD */
+		pio = 0;
+	}
+	/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
+	if (scsicmd[0] == WRITE_10) {
+		unsigned int lba =
+			(scsicmd[2] << 24) |
+			(scsicmd[3] << 16) |
+			(scsicmd[4] << 8) |
+			scsicmd[5];
+		if (lba >= 0xFFFF4FA2)
+			pio = 1;
+	}
+	return pio;
 }
 
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
-- 
cgit v1.2.3


From b4ecc126991b30fe5f9a59dfacda046aeac124b2 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 13 May 2009 17:16:55 -0700
Subject: x86: Fix performance regression caused by paravirt_ops on native
 kernels

Xiaohui Xin and some other folks at Intel have been looking into what's
behind the performance hit of paravirt_ops when running native.

It appears that the hit is entirely due to the paravirtualized
spinlocks introduced by:

 | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8
 | Date:   Mon Jul 7 12:07:51 2008 -0700
 |
 |     paravirt: introduce a "lock-byte" spinlock implementation

The extra call/return in the spinlock path is somehow
causing an increase in the cycles/instruction of somewhere around 2-7%
(seems to vary quite a lot from test to test).  The working theory is
that the CPU's pipeline is getting upset about the
call->call->locked-op->return->return, and seems to be failing to
speculate (though I haven't seen anything definitive about the precise
reasons).  This doesn't entirely make sense, because the performance
hit is also visible on unlock and other operations which don't involve
locked instructions.  But spinlock operations clearly swamp all the
other pvops operations, even though I can't imagine that they're
nearly as common (there's only a .05% increase in instructions
executed).

If I disable just the pv-spinlock calls, my tests show that pvops is
identical to non-pvops performance on native (my measurements show that
it is actually about .1% faster, but Xiaohui shows a .05% slowdown).

Summary of results, averaging 10 runs of the "mmperf" test, using a
no-pvops build as baseline:

		nopv		Pv-nospin	Pv-spin
CPU cycles	100.00%		99.89%		102.18%
instructions	100.00%		100.10%		100.15%
CPI		100.00%		99.79%		102.03%
cache ref	100.00%		100.84%		100.28%
cache miss	100.00%		90.47%		88.56%
cache miss rate	100.00%		89.72%		88.31%
branches	100.00%		99.93%		100.04%
branch miss	100.00%		103.66%		107.72%
branch miss rt	100.00%		103.73%		107.67%
wallclock	100.00%		99.90%		102.20%

The clear effect here is that the 2% increase in CPI is
directly reflected in the final wallclock time.

(The other interesting effect is that the more ops are
out of line calls via pvops, the lower the cache access
and miss rates.  Not too surprising, but it suggests that
the non-pvops kernel is over-inlined.  On the flipside,
the branch misses go up correspondingly...)

So, what's the fix?

Paravirt patching turns all the pvops calls into direct calls, so
_spin_lock etc do end up having direct calls.  For example, the compiler
generated code for paravirtualized _spin_lock is:

<_spin_lock+0>:		mov    %gs:0xb4c8,%rax
<_spin_lock+9>:		incl   0xffffffffffffe044(%rax)
<_spin_lock+15>:	callq  *0xffffffff805a5b30
<_spin_lock+22>:	retq

The indirect call will get patched to:
<_spin_lock+0>:		mov    %gs:0xb4c8,%rax
<_spin_lock+9>:		incl   0xffffffffffffe044(%rax)
<_spin_lock+15>:	callq <__ticket_spin_lock>
<_spin_lock+20>:	nop; nop		/* or whatever 2-byte nop */
<_spin_lock+22>:	retq

One possibility is to inline _spin_lock, etc, when building an
optimised kernel (ie, when there's no spinlock/preempt
instrumentation/debugging enabled).  That will remove the outer
call/return pair, returning the instruction stream to a single
call/return, which will presumably execute the same as the non-pvops
case.  The downsides arel 1) it will replicate the
preempt_disable/enable code at eack lock/unlock callsite; this code is
fairly small, but not nothing; and 2) the spinlock definitions are
already a very heavily tangled mass of #ifdefs and other preprocessor
magic, and making any changes will be non-trivial.

The other obvious answer is to disable pv-spinlocks.  Making them a
separate config option is fairly easy, and it would be trivial to
enable them only when Xen is enabled (as the only non-default user).
But it doesn't really address the common case of a distro build which
is going to have Xen support enabled, and leaves the open question of
whether the native performance cost of pv-spinlocks is worth the
performance improvement on a loaded Xen system (10% saving of overall
system CPU when guests block rather than spin).  Still it is a
reasonable short-term workaround.

[ Impact: fix pvops performance regression when running native ]

Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com>
Analysed-by: "Li Xin" <xin.li@intel.com>
Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Xen-devel <xen-devel@lists.xensource.com>
LKML-Reference: <4A0B62F7.5030802@goop.org>
[ fixed the help text ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                | 13 +++++++++++++
 arch/x86/include/asm/paravirt.h |  2 +-
 arch/x86/include/asm/spinlock.h |  4 ++--
 arch/x86/kernel/Makefile        |  3 ++-
 arch/x86/kernel/paravirt.c      |  2 ++
 arch/x86/xen/Makefile           |  5 +++--
 arch/x86/xen/xen-ops.h          | 19 +++++++++++++++----
 7 files changed, 38 insertions(+), 10 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index df9e885eee1..a6efe0a2e9a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -498,6 +498,19 @@ config PARAVIRT
 	  over full virtualization.  However, when run without a hypervisor
 	  the kernel is theoretically slower and slightly larger.
 
+config PARAVIRT_SPINLOCKS
+	bool "Paravirtualization layer for spinlocks"
+	depends on PARAVIRT && SMP && EXPERIMENTAL
+	---help---
+	  Paravirtualized spinlocks allow a pvops backend to replace the
+	  spinlock implementation with something virtualization-friendly
+	  (for example, block the virtual CPU rather than spinning).
+
+	  Unfortunately the downside is an up to 5% performance hit on
+	  native kernels, with various workloads.
+
+	  If you are unsure how to answer this question, answer N.
+
 config PARAVIRT_CLOCK
 	bool
 	default n
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 378e3691c08..a53da004e08 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -1443,7 +1443,7 @@ u64 _paravirt_ident_64(u64);
 
 #define paravirt_nop	((void *)_paravirt_nop)
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
 static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
 {
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index e5e6caffec8..b7e5db87639 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -172,7 +172,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 	return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
 }
 
-#ifndef CONFIG_PARAVIRT
+#ifndef CONFIG_PARAVIRT_SPINLOCKS
 
 static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
 {
@@ -206,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
 	__raw_spin_lock(lock);
 }
 
-#endif
+#endif	/* CONFIG_PARAVIRT_SPINLOCKS */
 
 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
 {
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 145cce75cda..88d1bfc847d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -89,7 +89,8 @@ obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o
 obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
 obj-$(CONFIG_PARAVIRT_CLOCK)	+= pvclock.o
 
 obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 8e45f446488..9faf43bea33 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -134,7 +134,9 @@ static void *get_call_destination(u8 type)
 		.pv_irq_ops = pv_irq_ops,
 		.pv_apic_ops = pv_apic_ops,
 		.pv_mmu_ops = pv_mmu_ops,
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
 		.pv_lock_ops = pv_lock_ops,
+#endif
 	};
 	return *((void **)&tmpl + type);
 }
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 3b767d03fd6..172438f86a0 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -9,5 +9,6 @@ obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm.o xen-asm_$(BITS).o \
 			grant-table.o suspend.o
 
-obj-$(CONFIG_SMP)		+= smp.o spinlock.o
-obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
\ No newline at end of file
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
+obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 20139464943..ca6596b05d5 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -62,15 +62,26 @@ void xen_setup_vcpu_info_placement(void);
 #ifdef CONFIG_SMP
 void xen_smp_init(void);
 
-void __init xen_init_spinlocks(void);
-__cpuinit void xen_init_lock_cpu(int cpu);
-void xen_uninit_lock_cpu(int cpu);
-
 extern cpumask_var_t xen_cpu_initialized_map;
 #else
 static inline void xen_smp_init(void) {}
 #endif
 
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+void __init xen_init_spinlocks(void);
+__cpuinit void xen_init_lock_cpu(int cpu);
+void xen_uninit_lock_cpu(int cpu);
+#else
+static inline void xen_init_spinlocks(void)
+{
+}
+static inline void xen_init_lock_cpu(int cpu)
+{
+}
+static inline void xen_uninit_lock_cpu(int cpu)
+{
+}
+#endif
 
 /* Declare an asm function, along with symbols needed to make it
    inlineable */
-- 
cgit v1.2.3


From 19799bfc5da476ad72eecc5f0f9018c5d351cbd5 Mon Sep 17 00:00:00 2001
From: David Milburn <dmilburn@redhat.com>
Date: Wed, 13 May 2009 18:02:21 -0500
Subject: [libata] sata_sx4: fixup interrupt handling

Issuing ATA_CMD_SET_FEATURES (0xef) times out because
pdc20621_interrupt ignores command completion since
ATA_TFLAG_POLLING flag is set.

This has already been fixed for sata_promise:

commit 51b94d2a5a90d4800e74d7348bcde098a28f4fb3
Author: Tejun Heo <htejun@gmail.com>
Date:   Fri Jun 8 13:46:55 2007 -0700

    sata_promise: use TF interface for polling NODATA commands

Also, this patch includes Mikael's original patches:

http://marc.info/?l=linux-ide&m=121135828227724&w=2
http://marc.info/?l=linux-ide&m=121144512109826&w=2

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_sx4.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 1ce98afa69b..eb05a3c82a9 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -687,8 +687,11 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
 static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
 {
 	switch (qc->tf.protocol) {
-	case ATA_PROT_DMA:
 	case ATA_PROT_NODATA:
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			break;
+		/*FALLTHROUGH*/
+	case ATA_PROT_DMA:
 		pdc20621_packet_start(qc);
 		return 0;
 
@@ -787,12 +790,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
 
 static void pdc20621_irq_clear(struct ata_port *ap)
 {
-	struct ata_host *host = ap->host;
-	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
-
-	mmio += PDC_CHIP0_OFS;
-
-	readl(mmio + PDC_20621_SEQMASK);
+	ioread8(ap->ioaddr.status_addr);
 }
 
 static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
@@ -877,14 +875,12 @@ static void pdc_freeze(struct ata_port *ap)
 static void pdc_thaw(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->ioaddr.cmd_addr;
-	void __iomem *mmio_base;
 	u32 tmp;
 
 	/* FIXME: start HDMA engine, if zero ATA engines running */
 
-	/* reading SEQ mask register clears IRQ */
-	mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
-	readl(mmio_base + PDC_20621_SEQMASK);
+	/* clear IRQ */
+	ioread8(ap->ioaddr.status_addr);
 
 	/* turn IRQ back on */
 	tmp = readl(mmio + PDC_CTLSTAT);
@@ -974,7 +970,7 @@ static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
-		tf->protocol == ATA_PROT_NODATA);
+		tf->protocol == ATAPI_PROT_DMA);
 	ata_sff_tf_load(ap, tf);
 }
 
@@ -982,7 +978,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON(tf->protocol == ATA_PROT_DMA ||
-		tf->protocol == ATA_PROT_NODATA);
+		tf->protocol == ATAPI_PROT_DMA);
 	ata_sff_exec_command(ap, tf);
 }
 
-- 
cgit v1.2.3


From f48c019f1550aea7a3a1227efb9901916f5cd30d Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 13 May 2009 22:10:50 -0500
Subject: sata_fsl: Fix compile warnings

We we build with dma_addr_t as a 64-bit quantity we get:

drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg':
drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_fsl.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index c2e90e1fece..5edd6549876 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -332,13 +332,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
 		dma_addr_t sg_addr = sg_dma_address(sg);
 		u32 sg_len = sg_dma_len(sg);
 
-		VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
-			sg_addr, sg_len);
+		VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
+			(unsigned long long)sg_addr, sg_len);
 
 		/* warn if each s/g element is not dword aligned */
 		if (sg_addr & 0x03)
 			ata_port_printk(qc->ap, KERN_ERR,
-					"s/g addr unaligned : 0x%x\n", sg_addr);
+					"s/g addr unaligned : 0x%llx\n",
+					(unsigned long long)sg_addr);
 		if (sg_len & 0x03)
 			ata_port_printk(qc->ap, KERN_ERR,
 					"s/g len unaligned : 0x%x\n", sg_len);
-- 
cgit v1.2.3


From d358724385d9bb3e360f5b95c17ec4f77c913460 Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Thu, 14 May 2009 09:47:07 -0500
Subject: sata_fsl: Fix the command description of FSL SATA controller

The bit 11 of command description is reserved bit in Freescale
SATA controller and needs to be set to '1'.  This is needed to
make sure the last write from the controller to the buffer
descriptor is seen before an interrupt is raised.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_fsl.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 5edd6549876..36b8629203b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -205,6 +205,7 @@ struct cmdhdr_tbl_entry {
  * Description information bitdefs
  */
 enum {
+	CMD_DESC_RES = (1 << 11),
 	VENDOR_SPECIFIC_BIST = (1 << 10),
 	CMD_DESC_SNOOP_ENABLE = (1 << 9),
 	FPDMA_QUEUED_CMD = (1 << 8),
@@ -388,7 +389,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
 	void __iomem *hcr_base = host_priv->hcr_base;
 	unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
 	struct command_desc *cd;
-	u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+	u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
 	u32 num_prde = 0;
 	u32 ttl_dwords = 0;
 	dma_addr_t cd_paddr;
@@ -841,7 +842,7 @@ issue_srst:
 
 	/* device reset/SRST is a control register update FIS, uses tag0 */
 	sata_fsl_setup_cmd_hdr_entry(pp, 0,
-				     SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+		SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
 
 	tf.ctl |= ATA_SRST;	/* setup SRST bit in taskfile control reg */
 	ata_tf_to_fis(&tf, pmp, 0, cfis);
@@ -887,7 +888,8 @@ issue_srst:
 	 * using ATA signature D2H register FIS to the host controller.
 	 */
 
-	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+	sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
+				      0, 0, 5);
 
 	tf.ctl &= ~ATA_SRST;	/* 2nd H2D Ctl. register FIS */
 	ata_tf_to_fis(&tf, pmp, 0, cfis);
-- 
cgit v1.2.3


From 61d79a8eb362f826a002d3d14c4f9a070a818542 Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Fri, 15 May 2009 00:40:34 -0400
Subject: libata: Report disk alignment and physical block size

For disks with 4KB sectors, report the correct block size and alignment
when filling out the READ CAPACITY(16) response.

This patch is based upon code from Matthew Wilcox' 4KB ATA tree.  I
fixed the bug I reported a while back caused by ATA and SCSI using
different approaches to describing the alignment.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 68d9132d8f6..d1718a1f278 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2376,7 +2376,23 @@ saving_not_supp:
  */
 static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 {
-	u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
+	struct ata_device *dev = args->dev;
+	u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */
+	u8 log_per_phys = 0;
+	u16 lowest_aligned = 0;
+	u16 word_106 = dev->id[106];
+	u16 word_209 = dev->id[209];
+
+	if ((word_106 & 0xc000) == 0x4000) {
+		/* Number and offset of logical sectors per physical sector */
+		if (word_106 & (1 << 13))
+			log_per_phys = word_106 & 0xf;
+		if ((word_209 & 0xc000) == 0x4000) {
+			u16 first = dev->id[209] & 0x3fff;
+			if (first > 0)
+				lowest_aligned = (1 << log_per_phys) - first;
+		}
+	}
 
 	VPRINTK("ENTER\n");
 
@@ -2407,6 +2423,11 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 		/* sector size */
 		rbuf[10] = ATA_SECT_SIZE >> 8;
 		rbuf[11] = ATA_SECT_SIZE & 0xff;
+
+		rbuf[12] = 0;
+		rbuf[13] = log_per_phys;
+		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
+		rbuf[15] = lowest_aligned;
 	}
 
 	return 0;
-- 
cgit v1.2.3


From 4bca3286433585b5f1c3e7d8ac37a2f4b3def9ca Mon Sep 17 00:00:00 2001
From: "Martin K. Petersen" <martin.petersen@oracle.com>
Date: Fri, 15 May 2009 00:40:35 -0400
Subject: libata: Media rotation rate and form factor heuristics

This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.

The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard.  Only then are the
characteristics reported to SCSI via the VPD B1 page.

This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever.  With no complaints so far.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-scsi.c | 11 ++++++-----
 include/linux/ata.h       | 28 ++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d1718a1f278..342316064e9 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2142,13 +2142,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
 
 static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
 {
+	int form_factor = ata_id_form_factor(args->id);
+	int media_rotation_rate = ata_id_rotation_rate(args->id);
+
 	rbuf[1] = 0xb1;
 	rbuf[3] = 0x3c;
-	if (ata_id_major_version(args->id) > 7) {
-		rbuf[4] = args->id[217] >> 8;
-		rbuf[5] = args->id[217];
-		rbuf[7] = args->id[168] & 0xf;
-	}
+	rbuf[4] = media_rotation_rate >> 8;
+	rbuf[5] = media_rotation_rate;
+	rbuf[7] = form_factor;
 
 	return 0;
 }
diff --git a/include/linux/ata.h b/include/linux/ata.h
index cb79b7a208e..915da43edee 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -730,6 +730,34 @@ static inline int ata_id_has_unload(const u16 *id)
 	return 0;
 }
 
+static inline int ata_id_form_factor(const u16 *id)
+{
+	u16 val = id[168];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	val &= 0xf;
+
+	if (val > 5)
+		return 0;
+
+	return val;
+}
+
+static inline int ata_id_rotation_rate(const u16 *id)
+{
+	u16 val = id[217];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	if (val > 1 && val < 0x401)
+		return 0;
+
+	return val;
+}
+
 static inline int ata_id_has_trim(const u16 *id)
 {
 	if (ata_id_major_version(id) >= 7 &&
-- 
cgit v1.2.3


From 4484079d517c2b6521621be0b1ea246ccc55c7d7 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Fri, 15 May 2009 23:30:50 +0200
Subject: PM: check sysdev_suspend(PMSG_FREEZE) return value

Check the return value of sysdev_suspend().  I think this was a typo.
Without this change, the following "if" check is always false.
I also changed the error message so it's distinguishable from the
similar message a few lines above.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 kernel/power/disk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index e71ca9cd81b..b0dc9e7a0d1 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -241,9 +241,9 @@ static int create_image(int platform_mode)
 
 	local_irq_disable();
 
-	sysdev_suspend(PMSG_FREEZE);
+	error = sysdev_suspend(PMSG_FREEZE);
 	if (error) {
-		printk(KERN_ERR "PM: Some devices failed to power down, "
+		printk(KERN_ERR "PM: Some system devices failed to power down, "
 			"aborting hibernation\n");
 		goto Enable_irqs;
 	}
-- 
cgit v1.2.3


From 975b3c474c13d29337eaf7da8f5f5c0299e4943f Mon Sep 17 00:00:00 2001
From: Lin Ming <ming.m.lin@intel.com>
Date: Fri, 15 May 2009 22:27:49 -0400
Subject: ACPI: resume: re-enable SCI-enable workaround

The BIOS bug workaround mistakenly got disabled
when we followed the ACPI specification more closely
by ignoring OS updates to that bit.

(The BIOS is supposed to update SCI_EN, not the OS)

http://bugzilla.kernel.org/show_bug.cgi?id=13289

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/aclocal.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 772ee5c4ccc..2ec394a328e 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -787,7 +787,12 @@ struct acpi_bit_register_info {
 
 /* For control registers, both ignored and reserved bits must be preserved */
 
-#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0201	/* Bits 9, 0(SCI_EN) */
+/*
+ * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
+ * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
+ * as a BIOS workaround on some machines.
+ */
+#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bits 9 */
 #define ACPI_PM1_CONTROL_RESERVED_BITS          0xC1F8	/* Bits 14-15, 3-8 */
 #define ACPI_PM1_CONTROL_PRESERVED_BITS \
 	       (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
-- 
cgit v1.2.3


From 815ab0fd40579ad2aa42058298073503648762b9 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 7 May 2009 22:19:45 -0400
Subject: ACPI: suspend: restore BM_RLD on resume

In 2.6.29,
31878dd86b7df9a147f5e6cc6e07092b4308782b
"ACPI: remove BM_RLD access from idle entry path"
moved BM_RLD initialization to init-time from run time.

But we discovered that some BIOS do not restore BM_RLD
after suspend, causing device errors on C3 and C4
after resume.  So now the kernel restores BM_RLD.

http://bugzilla.kernel.org/show_bug.cgi?id=13032

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_idle.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f7ca8c55956..c1d59cfdb5f 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -202,15 +202,38 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
  * Suspend / resume control
  */
 static int acpi_idle_suspend;
+static u32 saved_bm_rld;
+
+static void acpi_idle_bm_rld_save(void)
+{
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
+}
+static void acpi_idle_bm_rld_restore(void)
+{
+	u32 resumed_bm_rld;
+
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
+
+	if (resumed_bm_rld != saved_bm_rld)
+		acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
+}
 
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 {
+	if (acpi_idle_suspend == 1)
+		return 0;
+
+	acpi_idle_bm_rld_save();
 	acpi_idle_suspend = 1;
 	return 0;
 }
 
 int acpi_processor_resume(struct acpi_device * device)
 {
+	if (acpi_idle_suspend == 0)
+		return 0;
+
+	acpi_idle_bm_rld_restore();
 	acpi_idle_suspend = 0;
 	return 0;
 }
-- 
cgit v1.2.3


From ecb4aed78dcf09e48c8c34c8c2fa7f5c69344be6 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 24 Apr 2009 11:33:47 -0400
Subject: ACPI, i915: build fix

drivers/built-in.o: In function `intel_opregion_init':
(.text+0x9d540): undefined reference to `acpi_video_register'

http://bugzilla.kernel.org/show_bug.cgi?id=13165

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/gpu/drm/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 3a22eb9be37..f33d2527991 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -83,6 +83,12 @@ config DRM_I915
 config DRM_I915_KMS
 	bool "Enable modesetting on intel by default"
 	depends on DRM_I915
+	# i915 KMS depends on ACPI_VIDEO when ACPI is enabled
+	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+	select VIDEO_OUTPUT_CONTROL if ACPI
+	select BACKLIGHT_CLASS_DEVICE if ACPI
+	select INPUT if ACPI
+	select ACPI_VIDEO if ACPI
 	help
 	  Choose this option if you want kernel modesetting enabled by default,
 	  and you have a new enough userspace to support this. Running old
-- 
cgit v1.2.3


From 56c213fa012f2bad9eff908292ff2500f840b020 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Mon, 11 May 2009 09:35:57 +0800
Subject: ACPI processor: introduce module parameter processor.ignore_tpc

Introduce module parameter processor.ignore_tpc.

Some laptops are shipped with buggy _TPC,
this module parameter is used to to disable the buggy support.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_throttling.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index d0d1f4d5043..5f09fb8c0e0 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -45,6 +45,14 @@
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_throttling");
 
+/* ignore_tpc:
+ *  0 -> acpi processor driver doesn't ignore _TPC values
+ *  1 -> acpi processor driver ignores _TPC values
+ */
+static int ignore_tpc;
+module_param(ignore_tpc, int, 0644);
+MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support");
+
 struct throttling_tstate {
 	unsigned int cpu;		/* cpu nr */
 	int target_state;		/* target T-state */
@@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 
 	if (!pr)
 		return -EINVAL;
+
+	if (ignore_tpc)
+		goto end;
+
 	status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
 	if (ACPI_FAILURE(status)) {
 		if (status != AE_NOT_FOUND) {
@@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 		}
 		return -ENODEV;
 	}
+
+end:
 	pr->throttling_platform_limit = (int)tpc;
 	return 0;
 }
@@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
 	struct acpi_processor_limit *limit;
 	int target_state;
 
+	if (ignore_tpc)
+		return 0;
+
 	result = acpi_processor_get_platform_limit(pr);
 	if (result) {
 		/* Throttling Limit is unsupported */
-- 
cgit v1.2.3


From 4973b22aa8c70fe036e3e0039f104cf5bb7fe2b1 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Mon, 11 May 2009 09:36:01 +0800
Subject: ACPI processor: reset the throttling state once it's invalid

If the BIOS hands us an invalid throttling state,
write a valid state.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_throttling.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 5f09fb8c0e0..7f16f5f8e7d 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -838,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 	ret = acpi_read_throttling_status(pr, &value);
 	if (ret >= 0) {
 		state = acpi_get_throttling_state(pr, value);
+		if (state == -1) {
+			ACPI_WARNING((AE_INFO,
+				"Invalid throttling state, reset\n"));
+			state = 0;
+			ret = acpi_processor_set_throttling(pr, state);
+			if (ret)
+				return ret;
+		}
 		pr->throttling.state = state;
 	}
 
-- 
cgit v1.2.3


From 1406de8e11eb043681297adf86d6892ff8efc27a Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 15 May 2009 21:12:57 -0700
Subject: Linux 2.6.30-rc6

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 9b2b58c3b3d..b57e1f539e8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
-- 
cgit v1.2.3


From 520daf7217bc1806c02eb4cfa7805447a3da2f66 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Thu, 14 May 2009 17:27:38 -0400
Subject: ACPI: idle: fix init-time TSC check regression

A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2,
(ACPI: idle: mark_tsc_unstable() at init-time, not run-time)
erroneously disabled the TSC on systems that did not actually
have valid deep C-states.

Move the check after the deep-C-states are validated,
via new helper, tsc_check_state(), hich replaces tsc_halts_in_c().

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frans Pop <elendil@planet.nl>
---
 drivers/acpi/processor_idle.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f7ca8c55956..e39a40a2cea 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -216,7 +216,7 @@ int acpi_processor_resume(struct acpi_device * device)
 }
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-static int tsc_halts_in_c(int state)
+static void tsc_check_state(int state)
 {
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -226,13 +226,17 @@ static int tsc_halts_in_c(int state)
 		 * C/P/S0/S1 states when this bit is set.
 		 */
 		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return 0;
+			return;
 
 		/*FALL THROUGH*/
 	default:
-		return state > ACPI_STATE_C1;
+		/* TSC could halt in idle, so notify users */
+		if (state > ACPI_STATE_C1)
+			mark_tsc_unstable("TSC halts in idle");
 	}
 }
+#else
+static void tsc_check_state(int state) { return; }
 #endif
 
 static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
@@ -581,11 +585,6 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-		/* TSC could halt in idle, so notify users */
-		if (tsc_halts_in_c(cx->type))
-			mark_tsc_unstable("TSC halts in idle");;
-#endif
 		switch (cx->type) {
 		case ACPI_STATE_C1:
 			cx->valid = 1;
@@ -603,6 +602,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 				acpi_timer_check_state(i, pr, cx);
 			break;
 		}
+		if (cx->valid)
+			tsc_check_state(cx->type);
 
 		if (cx->valid)
 			working++;
-- 
cgit v1.2.3


From a0bf284bfedd6dc95bbee7ebf5ccf3b5f753a008 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 15 May 2009 01:29:31 -0400
Subject: ACPI: Idle C-states disabled by max_cstate should not disable the TSC

Processor idle power states C2 and C3 stop the TSC on many machines.
Linux recognizes this situation and marks the TSC as unstable:

Marking TSC unstable due to TSC halts in idle

But if those same machines are booted with "processor.max_cstate=1",
then there is no need to validate C2 and C3, and no need to
disable the TSC, which can be reliably used as a clocksource.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/acpi/processor_idle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index e39a40a2cea..e65476fdf40 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -582,7 +582,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 
 	pr->power.timer_broadcast_on_state = INT_MAX;
 
-	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
+	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
 		switch (cx->type) {
-- 
cgit v1.2.3


From e102657ed16bbed49820d9c58509220fc8d9289a Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Sat, 16 May 2009 08:28:16 -0700
Subject: ARM: OMAP3: Fix number of GPIO lines for 34xx

As per 3430 TRM, there are 6 banks [0 to 191]

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 17d7afe42b8..ee0b21f5b09 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 160)
+	if (cpu_is_omap34xx() && gpio < 192)
 		return 0;
 	return -1;
 }
-- 
cgit v1.2.3


From 8dbe43930a4e9bede88eb67a9c613773a2747caf Mon Sep 17 00:00:00 2001
From: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Date: Sat, 16 May 2009 08:28:17 -0700
Subject: ARM: OMAP3: Fix HW SAVEANDRESTORE shift define

The OMAP3430ES2_SAVEANDRESTORE_SHIFT macro is used
by powerdomain code in
"1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT" manner, but
the definition was also (1 << 4), meaning we actually
modified bit 16. So the definition needs to be 4.

This fixes also a cold reset HW bug in OMAP3430 ES3.x
where some of the efuse bits are not isolated during
wake-up from off mode. This can cause randomish
cold resets with off mode. Enabling the USBTLL hardware
SAVEANDRESTORE causes the core power up assert to be
delayed in a way that we will not get faulty values
when boot ROM is reading the unisolated registers.

Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/prm-regbits-34xx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index c6a7940f428..9fd03a2ec95 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -409,7 +409,7 @@
 /* PM_PREPWSTST_CAM specific bits */
 
 /* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
 
 /* RM_RSTST_PER specific bits */
 
-- 
cgit v1.2.3


From 005187eecaa400b4b43d9f640fbde9fcc50f37c1 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Sat, 16 May 2009 08:28:17 -0700
Subject: ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2

This makes the framebuffer work on omap3.

Also fix the clk_get usage for checkpatch.pl
"ERROR: do not use assignment in if condition".

Cc: Imre Deak <imre.deak@nokia.com>
Cc: linux-fbdev-devel@lists.sourceforge.net
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock24xx.c |  8 ++++----
 arch/arm/mach-omap2/clock34xx.c | 10 +++++-----
 drivers/video/omap/dispc.c      | 14 ++++++++------
 drivers/video/omap/rfbi.c       |  8 +++++---
 4 files changed, 22 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index ff9b4c0b00a..e4cef333e29 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index a0575393d0e..ba05aa42bd8 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
-	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index dfb72f5e4c9..148cbcc3960 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -880,20 +880,22 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
 
 static int get_dss_clocks(void)
 {
-	if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) {
-		dev_err(dispc.fbdev->dev, "can't get dss_ick\n");
+	dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick");
+	if (IS_ERR(dispc.dss_ick)) {
+		dev_err(dispc.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(dispc.dss_ick);
 	}
 
-	if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) {
+	dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck");
+	if (IS_ERR(dispc.dss1_fck)) {
 		dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(dispc.dss_ick);
 		return PTR_ERR(dispc.dss1_fck);
 	}
 
-	if (IS_ERR((dispc.dss_54m_fck =
-				clk_get(dispc.fbdev->dev, "dss_54m_fck")))) {
-		dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n");
+	dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck");
+	if (IS_ERR(dispc.dss_54m_fck)) {
+		dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
 		clk_put(dispc.dss_ick);
 		clk_put(dispc.dss1_fck);
 		return PTR_ERR(dispc.dss_54m_fck);
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index a13c8dcad2a..9332d6ca645 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -83,12 +83,14 @@ static inline u32 rfbi_read_reg(int idx)
 
 static int rfbi_get_clocks(void)
 {
-	if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) {
-		dev_err(rfbi.fbdev->dev, "can't get dss_ick\n");
+	rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick");
+	if (IS_ERR(rfbi.dss_ick)) {
+		dev_err(rfbi.fbdev->dev, "can't get ick\n");
 		return PTR_ERR(rfbi.dss_ick);
 	}
 
-	if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) {
+	rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck");
+	if (IS_ERR(rfbi.dss1_fck)) {
 		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(rfbi.dss_ick);
 		return PTR_ERR(rfbi.dss1_fck);
-- 
cgit v1.2.3


From 36999a5af1b6c5379e59f0ddf434db08d03c19e4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sun, 19 Apr 2009 07:00:41 +0900
Subject: ide-tape: remove back-to-back REQUEST_SENSE detection

Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index cb942a9b580..3a53e0834cf 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 {
 	idetape_tape_t *tape = drive->driver_data;
 
-	if (drive->pc->c[0] == REQUEST_SENSE &&
-	    pc->c[0] == REQUEST_SENSE) {
-		printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
-			"Two request sense in serial were issued\n");
-	}
-
 	if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
 		drive->failed_pc = pc;
 
-- 
cgit v1.2.3


From b019447ce73513432af052f30fa239d6dc93e111 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 16 May 2009 19:03:36 +0200
Subject: icside: register second channel of version 6 PCB

The second IDE channel of version 6 PCB is not being registered anymore since
the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host
(take 3)).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/icside.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 4e16ce68b06..36da913cc55 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -466,7 +466,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	struct ide_host *host;
 	unsigned int sel = 0;
 	int ret;
-	hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
+	hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL };
 	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
-- 
cgit v1.2.3


From d8788298d491ee5026981eb751b0341a996b22e4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Sat, 16 May 2009 19:03:36 +0200
Subject: piix: The Sony TZ90 needs the cable type hardcoding

The Sony TZ90 needs the cable type hardcoding. See bug #12734

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by:  Jonathan E. Snow <jesnow@uh.edu>
[bart: port it from ata_piix to piix and give reporter the proper credit]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/piix.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 2aa69993306..69860dea382 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
 	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
 	{ 0x2653, 0x1043, 0x82D8 },	/* ICH6M on Asus Eee 701 */
+	{ 0x27df, 0x104d, 0x900e },	/* ICH7 on Sony TZ-90 */
 	/* end marker */
 	{ 0, }
 };
-- 
cgit v1.2.3


From ff05c0330b9880f9ccbb7fa40f2ed3b5842f5693 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 7 May 2009 18:41:47 +0100
Subject: [ARM] 5509/1: ep93xx: clkdev enable UARTS

Fix the clkdev API support for the ep93xx uart clocks.

The uarts available in the ep93xx have individual clock controls.
The current implementation assumes that the bootloader has enabled
the clocks before the kernel has booted. It also assumes that the
bootloader has set the UARTBAUD bit indicating that the uarts are
running off the 14.7456MHz external crystal.

This fixes both issues. It also allows the uart clocks to be stopped
when there are no users.

Tested-by: Matthias Kaehlcke <matthias@kaehlcke.net>

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                    | 69 ++++++++++++++++++++++---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  5 +-
 2 files changed, 65 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e8ebeaea6c4..b2eede5531c 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -21,15 +21,50 @@
 #include <asm/div64.h>
 #include <mach/hardware.h>
 
+
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+
 struct clk {
 	unsigned long	rate;
 	int		users;
+	int		sw_locked;
 	u32		enable_reg;
 	u32		enable_mask;
+
+	unsigned long	(*get_rate)(struct clk *clk);
 };
 
-static struct clk clk_uart = {
-	.rate		= 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart2 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart3 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
 static struct clk clk_f;
@@ -95,9 +130,9 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart),
-	INIT_CK("apb:uart2", NULL, &clk_uart),
-	INIT_CK("apb:uart3", NULL, &clk_uart),
+	INIT_CK("apb:uart1", NULL, &clk_uart1),
+	INIT_CK("apb:uart2", NULL, &clk_uart2),
+	INIT_CK("apb:uart3", NULL, &clk_uart3),
 	INIT_CK(NULL, "pll1", &clk_pll1),
 	INIT_CK(NULL, "fclk", &clk_f),
 	INIT_CK(NULL, "hclk", &clk_h),
@@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value | clk->enable_mask, clk->enable_reg);
 	}
 
@@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
 
+static unsigned long get_uart_rate(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
+	if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+		return EP93XX_EXT_CLK_RATE;
+	else
+		return EP93XX_EXT_CLK_RATE / 2;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
@@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = 14745600;
+	rate = EP93XX_EXT_CLK_RATE;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = 14745600;
+		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = 14745600;
+		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index f66be12b856..1732de7629a 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -159,7 +159,10 @@
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
 #define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
-- 
cgit v1.2.3


From 776abac81764847338a6a02c34609d4b8dfb4918 Mon Sep 17 00:00:00 2001
From: Ricardo Martins <rasm@fe.up.pt>
Date: Mon, 11 May 2009 00:15:08 +0100
Subject: [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error

Compilation for this board yields the following errors:

arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function)
arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function)
arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function)

Fix them by including the necessary header.

Signed-off-by: Ricardo Martins <rasm@fe.up.pt>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/viper.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 0e65344e9f5..dd031cc4184 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -46,6 +46,7 @@
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/i2c.h>
+#include <mach/regs-uart.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>
-- 
cgit v1.2.3


From 0f6f49a8cd0163fdb1723ed29f01fc65177108dc Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat, 16 May 2009 13:41:28 -0700
Subject: Fix caller information for warn_slowpath_null

Ian Campbell noticed that since "Eliminate thousands of warnings with
gcc 3.2 build" (commit 57adc4d2dbf968fdbe516359688094eef4d46581) all
WARN_ON()'s currently appear to come from warn_slowpath_null(), eg:

  WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20()

because now that warn_slowpath_null() is in the call path, the
__builtin_return_address(0) returns that, rather than the place that
caused the warning.

Fix this by splitting up the warn_slowpath_null/fmt cases differently,
using a common helper function, and getting the return address in the
right place.  This also happens to avoid the unnecessary stack usage for
the non-stdargs case, and just generally cleans things up.

Make the function name printout use %pS while at it.

Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/panic.c | 35 ++++++++++++++++++++---------------
 1 file changed, 20 insertions(+), 15 deletions(-)

diff --git a/kernel/panic.c b/kernel/panic.c
index 874ecf1307a..984b3ecbd72 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -340,39 +340,44 @@ void oops_exit(void)
 }
 
 #ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
-{
+struct slowpath_args {
+	const char *fmt;
 	va_list args;
-	char function[KSYM_SYMBOL_LEN];
-	unsigned long caller = (unsigned long)__builtin_return_address(0);
-	const char *board;
+};
 
-	sprint_symbol(function, caller);
+static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args)
+{
+	const char *board;
 
 	printk(KERN_WARNING "------------[ cut here ]------------\n");
-	printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file,
-		line, function);
+	printk(KERN_WARNING "WARNING: at %s:%d %pS()\n", file, line, caller);
 	board = dmi_get_system_info(DMI_PRODUCT_NAME);
 	if (board)
 		printk(KERN_WARNING "Hardware name: %s\n", board);
 
-	if (*fmt) {
-		va_start(args, fmt);
-		vprintk(fmt, args);
-		va_end(args);
-	}
+	if (args)
+		vprintk(args->fmt, args->args);
 
 	print_modules();
 	dump_stack();
 	print_oops_end_marker();
 	add_taint(TAINT_WARN);
 }
+
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
+{
+	struct slowpath_args args;
+
+	args.fmt = fmt;
+	va_start(args.args, fmt);
+	warn_slowpath_common(file, line, __builtin_return_address(0), &args);
+	va_end(args.args);
+}
 EXPORT_SYMBOL(warn_slowpath_fmt);
 
 void warn_slowpath_null(const char *file, int line)
 {
-	static const char *empty = "";
-	warn_slowpath_fmt(file, line, empty);
+	warn_slowpath_common(file, line, __builtin_return_address(0), NULL);
 }
 EXPORT_SYMBOL(warn_slowpath_null);
 #endif
-- 
cgit v1.2.3


From 826681043d7184b4d650cab5b007b9a86b628eb5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 17 May 2009 16:20:18 +0100
Subject: [ARM] smp: fix cpumask usage in ARM SMP code

The ARM SMP code wasn't properly updated for the cpumask changes, which
results in smp_timer_broadcast() broadcasting ticks to non-online CPUs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/gic.c                     |  4 +--
 arch/arm/include/asm/hardware/gic.h       |  2 +-
 arch/arm/include/asm/smp.h                | 12 +++-----
 arch/arm/kernel/smp.c                     | 46 +++++++++++--------------------
 arch/arm/mach-realview/include/mach/smp.h |  6 ++--
 arch/arm/mach-realview/platsmp.c          |  4 +--
 6 files changed, 28 insertions(+), 46 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index c6884ba1d5e..3e1714c6523 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 }
 
 #ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
-	unsigned long map = *cpus_addr(cpumask);
+	unsigned long map = *cpus_addr(*mask);
 
 	/* this always happens on GIC0 */
 	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 4924914af18..7f34333bb54 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -36,7 +36,7 @@
 void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
 void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index fad70da5911..5995935338e 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 /*
  * Raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
+extern void smp_cross_call(const struct cpumask *mask);
 
 /*
  * Broadcast a clock event to other CPUs.
  */
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_timer_broadcast(const struct cpumask *mask);
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
@@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu);
 extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * Local timer interrupt handling function (can be IPI'ed).
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 7801aac3c04..6014dfd22af 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 {
 	unsigned long flags;
 	unsigned int cpu;
 
 	local_irq_save(flags);
 
-	for_each_cpu_mask(cpu, callmap) {
+	for_each_cpu(cpu, mask) {
 		struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
 
 		spin_lock(&ipi->lock);
@@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
-	smp_cross_call(callmap);
+	smp_cross_call(mask);
 
 	local_irq_restore(flags);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 void show_ipi_list(struct seq_file *p)
@@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
 
 void smp_send_reschedule(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-void smp_send_timer(void)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
+void smp_timer_broadcast(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_TIMER);
 }
@@ -517,7 +510,7 @@ void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_CPU_STOP);
+	send_ipi_message(&mask, IPI_CPU_STOP);
 }
 
 /*
@@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier)
 	return -EINVAL;
 }
 
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+		const struct cpumask *mask)
 {
-	int ret = 0;
-
 	preempt_disable();
 
-	ret = smp_call_function_mask(mask, func, info, wait);
-	if (cpu_isset(smp_processor_id(), mask))
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(smp_processor_id(), mask))
 		func(info);
 
 	preempt_enable();
-
-	return ret;
 }
 
 /**********************************************************************/
@@ -602,20 +592,17 @@ void flush_tlb_all(void)
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t mask = mm->cpu_vm_mask;
-
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = uaddr;
 
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index 515819efd04..e2ff53402f8 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -15,15 +15,15 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
 {
-	gic_raise_softirq(callmap, 1);
+	gic_raise_softirq(mask, 1);
 }
 
 /*
  * Do nothing on MPcore.
  */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call_done(const struct cpumask *mask)
 {
 }
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ea3c75595fa..a5730466dff 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -82,7 +82,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * to get this processor out of WFI in the BootMonitor - make
 	 * sure that we are no longer being sent this soft interrupt
 	 */
-	smp_cross_call_done(cpumask_of_cpu(cpu));
+	smp_cross_call_done(cpumask_of(cpu));
 
 	/*
 	 * if any interrupts are already enabled for the primary
@@ -136,7 +136,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Use smp_cross_call() for this, since there's little
 	 * point duplicating the code here
 	 */
-	smp_cross_call(cpumask_of_cpu(cpu));
+	smp_cross_call(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
-- 
cgit v1.2.3


From 78d236c2b30d4712c1fd8c9768b163c94b39e77d Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 17 May 2009 16:23:45 +0100
Subject: [ARM] realview: remove useless smp_cross_call_done()

smp_cross_call_done() is a no-op for MPCore, and since it's only
used by platform code, there's no point in having it unless it's
doing something.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/include/mach/smp.h | 7 -------
 arch/arm/mach-realview/platsmp.c          | 7 -------
 2 files changed, 14 deletions(-)

diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index e2ff53402f8..dd53892d44a 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -20,11 +20,4 @@ static inline void smp_cross_call(const struct cpumask *mask)
 	gic_raise_softirq(mask, 1);
 }
 
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(const struct cpumask *mask)
-{
-}
-
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index a5730466dff..b037fd6c82d 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	trace_hardirqs_off();
 
-	/*
-	 * the primary core may have used a "cross call" soft interrupt
-	 * to get this processor out of WFI in the BootMonitor - make
-	 * sure that we are no longer being sent this soft interrupt
-	 */
-	smp_cross_call_done(cpumask_of(cpu));
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
-- 
cgit v1.2.3


From ee348d5a1d810bc9958cabb7c27302aab235d36e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 17 May 2009 17:00:47 +0100
Subject: [ARM] realview: fix broadcast tick support

Having discussed broadcast tick support with Thomas Glexiner, the
broadcast tick devices should be registered with a higher rating
than the global tick device, and it should have the ONESHOT and
PERIODIC feature flags set.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Thomas Glexiner <tglx@linutronix.de>
---
 arch/arm/mach-realview/core.c       | 8 --------
 arch/arm/mach-realview/localtimer.c | 6 ++++--
 arch/arm/mach-realview/platsmp.c    | 6 ++----
 3 files changed, 6 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 942e1a7eb9b..076acbc5070 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq)
 {
 	u32 val;
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	/*
-	 * The dummy clock device has to be registered before the main device
-	 * so that the latter will broadcast the clock events
-	 */
-	local_timer_setup();
-#endif
-
 	/* 
 	 * set clock frequency: 
 	 *	REALVIEW_REFCLK is 32KHz
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index d0d39adf640..1c01d13460f 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void)
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
 	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 200;
+	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DUMMY;
+	clk->rating		= 400;
 	clk->mult               = 1;
 	clk->set_mode		= dummy_timer_set_mode;
 	clk->broadcast		= smp_timer_broadcast;
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index b037fd6c82d..30a9c68591f 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -217,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#ifdef CONFIG_LOCAL_TIMERS
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
 	/*
-	 * Enable the local timer for primary CPU. If the device is
-	 * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
-	 * realview_timer_init
+	 * Enable the local timer or broadcast device for the boot CPU.
 	 */
 	local_timer_setup();
 #endif
-- 
cgit v1.2.3


From 12abb35a03e32c97235fcefdcf2d851be9f82dc2 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Sun, 17 May 2009 01:02:01 -0400
Subject: reiserfs: clean up ifdefs

With xattr cleanup even with xattrs disabled, much of the initial setup
is still performed.  Some #ifdefs are just not needed since the options
they protect wouldn't be available anyway.

This cleans those up.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/xattr.c | 45 ++++++++++++++++++++++-----------------------
 1 file changed, 22 insertions(+), 23 deletions(-)

diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 2237e10c7c7..cf949646dd5 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -685,20 +685,6 @@ out:
 	return err;
 }
 
-/* Actual operations that are exported to VFS-land */
-struct xattr_handler *reiserfs_xattr_handlers[] = {
-	&reiserfs_xattr_user_handler,
-	&reiserfs_xattr_trusted_handler,
-#ifdef CONFIG_REISERFS_FS_SECURITY
-	&reiserfs_xattr_security_handler,
-#endif
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
-	&reiserfs_posix_acl_access_handler,
-	&reiserfs_posix_acl_default_handler,
-#endif
-	NULL
-};
-
 /*
  * In order to implement different sets of xattr operations for each xattr
  * prefix with the generic xattr API, a filesystem should create a
@@ -922,6 +908,28 @@ static int create_privroot(struct dentry *dentry)
 	return 0;
 }
 
+#else
+int __init reiserfs_xattr_register_handlers(void) { return 0; }
+void reiserfs_xattr_unregister_handlers(void) {}
+static int create_privroot(struct dentry *dentry) { return 0; }
+#endif
+
+/* Actual operations that are exported to VFS-land */
+struct xattr_handler *reiserfs_xattr_handlers[] = {
+#ifdef CONFIG_REISERFS_FS_XATTR
+	&reiserfs_xattr_user_handler,
+	&reiserfs_xattr_trusted_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_SECURITY
+	&reiserfs_xattr_security_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_POSIX_ACL
+	&reiserfs_posix_acl_access_handler,
+	&reiserfs_posix_acl_default_handler,
+#endif
+	NULL
+};
+
 static int xattr_mount_check(struct super_block *s)
 {
 	/* We need generation numbers to ensure that the oid mapping is correct
@@ -941,11 +949,6 @@ static int xattr_mount_check(struct super_block *s)
 	return 0;
 }
 
-#else
-int __init reiserfs_xattr_register_handlers(void) { return 0; }
-void reiserfs_xattr_unregister_handlers(void) {}
-#endif
-
 /* This will catch lookups from the fs root to .reiserfs_priv */
 static int
 xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
@@ -992,7 +995,6 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags)
 	int err = 0;
 	struct dentry *privroot = REISERFS_SB(s)->priv_root;
 
-#ifdef CONFIG_REISERFS_FS_XATTR
 	err = xattr_mount_check(s);
 	if (err)
 		goto error;
@@ -1023,14 +1025,11 @@ error:
 		clear_bit(REISERFS_XATTRS_USER, &(REISERFS_SB(s)->s_mount_opt));
 		clear_bit(REISERFS_POSIXACL, &(REISERFS_SB(s)->s_mount_opt));
 	}
-#endif
 
 	/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
 	if (reiserfs_posixacl(s))
 		s->s_flags |= MS_POSIXACL;
 	else
-#endif
 		s->s_flags &= ~MS_POSIXACL;
 
 	return err;
-- 
cgit v1.2.3


From ceb5edc457f07956c82dccfb54ca8ae7e2a399f0 Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Sun, 17 May 2009 01:02:02 -0400
Subject: reiserfs: deal with NULL xattr root w/ xattrs disabled

This avoids an Oops in open_xa_root that can occur when deleting a file
with xattrs disabled.  It assumes that the xattr root will be there, and
that is not guaranteed.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/super.c | 2 --
 fs/reiserfs/xattr.c | 4 +++-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1215a4f50cd..3567fb9e3fb 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -448,13 +448,11 @@ int remove_save_link(struct inode *inode, int truncate)
 static void reiserfs_kill_sb(struct super_block *s)
 {
 	if (REISERFS_SB(s)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
 		if (REISERFS_SB(s)->xattr_root) {
 			d_invalidate(REISERFS_SB(s)->xattr_root);
 			dput(REISERFS_SB(s)->xattr_root);
 			REISERFS_SB(s)->xattr_root = NULL;
 		}
-#endif
 		if (REISERFS_SB(s)->priv_root) {
 			d_invalidate(REISERFS_SB(s)->priv_root);
 			dput(REISERFS_SB(s)->priv_root);
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index cf949646dd5..628075ca82c 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -123,7 +123,9 @@ static struct dentry *open_xa_root(struct super_block *sb, int flags)
 	mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
 
 	xaroot = dget(REISERFS_SB(sb)->xattr_root);
-	if (!xaroot->d_inode) {
+	if (!xaroot)
+		xaroot = ERR_PTR(-ENODATA);
+	else if (!xaroot->d_inode) {
 		int err = -ENODATA;
 		if (xattr_may_create(flags))
 			err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
-- 
cgit v1.2.3


From b83674c0da6558e357c6b482ccf299eeea77d8ef Mon Sep 17 00:00:00 2001
From: Jeff Mahoney <jeffm@suse.com>
Date: Sun, 17 May 2009 01:02:03 -0400
Subject: reiserfs: fixup perms when xattrs are disabled

This adds CONFIG_REISERFS_FS_XATTR protection from reiserfs_permission.

This is needed to avoid warnings during file deletions and chowns with
xattrs disabled.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/xattr.c            | 36 +++++++++++++++++++-----------------
 include/linux/reiserfs_xattr.h |  4 +---
 2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 628075ca82c..8e7deb0e696 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -871,23 +871,6 @@ static int reiserfs_check_acl(struct inode *inode, int mask)
 	return error;
 }
 
-int reiserfs_permission(struct inode *inode, int mask)
-{
-	/*
-	 * We don't do permission checks on the internal objects.
-	 * Permissions are determined by the "owning" object.
-	 */
-	if (IS_PRIVATE(inode))
-		return 0;
-	/*
-	 * Stat data v1 doesn't support ACLs.
-	 */
-	if (get_inode_sd_version(inode) == STAT_DATA_V1)
-		return generic_permission(inode, mask, NULL);
-	else
-		return generic_permission(inode, mask, reiserfs_check_acl);
-}
-
 static int create_privroot(struct dentry *dentry)
 {
 	int err;
@@ -951,6 +934,25 @@ static int xattr_mount_check(struct super_block *s)
 	return 0;
 }
 
+int reiserfs_permission(struct inode *inode, int mask)
+{
+	/*
+	 * We don't do permission checks on the internal objects.
+	 * Permissions are determined by the "owning" object.
+	 */
+	if (IS_PRIVATE(inode))
+		return 0;
+
+#ifdef CONFIG_REISERFS_FS_XATTR
+	/*
+	 * Stat data v1 doesn't support ACLs.
+	 */
+	if (get_inode_sd_version(inode) != STAT_DATA_V1)
+		return generic_permission(inode, mask, reiserfs_check_acl);
+#endif
+	return generic_permission(inode, mask, NULL);
+}
+
 /* This will catch lookups from the fs root to .reiserfs_priv */
 static int
 xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index cdedc01036e..99928dce37e 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -41,6 +41,7 @@ int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
 int reiserfs_lookup_privroot(struct super_block *sb);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
+int reiserfs_permission(struct inode *inode, int mask);
 
 #ifdef CONFIG_REISERFS_FS_XATTR
 #define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir)
@@ -50,7 +51,6 @@ int reiserfs_setxattr(struct dentry *dentry, const char *name,
 		      const void *value, size_t size, int flags);
 ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size);
 int reiserfs_removexattr(struct dentry *dentry, const char *name);
-int reiserfs_permission(struct inode *inode, int mask);
 
 int reiserfs_xattr_get(struct inode *, const char *, void *, size_t);
 int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int);
@@ -117,8 +117,6 @@ static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
 #define reiserfs_listxattr NULL
 #define reiserfs_removexattr NULL
 
-#define reiserfs_permission NULL
-
 static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
 {
 }
-- 
cgit v1.2.3


From 22ef37eed673587ac984965dc88ba94c68873291 Mon Sep 17 00:00:00 2001
From: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Date: Sat, 16 May 2009 22:56:28 -0700
Subject: page-writeback: fix the calculation of the oldest_jif in wb_kupdate()

wb_kupdate() function has a bug on linux-2.6.30-rc5.  This bug causes
generic_sync_sb_inodes() to start to write inodes back much earlier than
our expectations because it miscalculates oldest_jif in wb_kupdate().

This bug was introduced in 704503d836042d4a4c7685b7036e7de0418fbc0f
('mm: fix proc_dointvec_userhz_jiffies "breakage"').

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page-writeback.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 30351f0063a..bb553c3e955 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -94,12 +94,12 @@ unsigned long vm_dirty_bytes;
 /*
  * The interval between `kupdate'-style writebacks
  */
-unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */
+unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
 
 /*
  * The longest time for which data is allowed to remain dirty
  */
-unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */
+unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
 
 /*
  * Flag that makes the machine dump writes/reads and block dirtyings.
@@ -770,7 +770,7 @@ static void wb_kupdate(unsigned long arg)
 
 	sync_supers();
 
-	oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval);
+	oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
 	start_jif = jiffies;
 	next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
 	nr_to_write = global_page_state(NR_FILE_DIRTY) +
-- 
cgit v1.2.3


From 5e392739d6ab72f7c35040aa07f4097904bce6e7 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Mon, 11 May 2009 00:36:35 +0000
Subject: netpoll: don't dereference NULL dev from np

It looks like the dev in netpoll_poll can be NULL - at lease it's
checked at the function beginning. Thus the dev->netde_ops dereference
looks dangerous.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/netpoll.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index b5873bdff61..64f51eec657 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -175,9 +175,13 @@ static void service_arp_queue(struct netpoll_info *npi)
 void netpoll_poll(struct netpoll *np)
 {
 	struct net_device *dev = np->dev;
-	const struct net_device_ops *ops = dev->netdev_ops;
+	const struct net_device_ops *ops;
+
+	if (!dev || !netif_running(dev))
+		return;
 
-	if (!dev || !netif_running(dev) || !ops->ndo_poll_controller)
+	ops = dev->netdev_ops;
+	if (!ops->ndo_poll_controller)
 		return;
 
 	/* Process pending work on NIC */
-- 
cgit v1.2.3


From 2513dfb83fc775364fe85803d3a84d7ebe5763a5 Mon Sep 17 00:00:00 2001
From: Chris Friesen <cfriesen@nortel.com>
Date: Sun, 17 May 2009 20:39:33 -0700
Subject: ipconfig: handle case of delayed DHCP server

If a DHCP server is delayed, it's possible for the client to receive the
DHCPOFFER after it has already sent out a new DHCPDISCOVER message from
a second interface.  The client then sends out a DHCPREQUEST from the
second interface, but the server doesn't recognize the device and
rejects the request.

This patch simply tracks the current device being configured and throws
away the OFFER if it is not intended for the current device.  A more
sophisticated approach would be to put the OFFER information into the
struct ic_device rather than storing it globally.

Signed-off-by: Chris Friesen <cfriesen@nortel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/ipconfig.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 90d22ae0a41..88bf051d0cb 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -139,6 +139,8 @@ __be32 ic_servaddr = NONE;	/* Boot server IP address */
 __be32 root_server_addr = NONE;	/* Address of NFS server */
 u8 root_server_path[256] = { 0, };	/* Path to mount as root */
 
+u32 ic_dev_xid;		/* Device under configuration */
+
 /* vendor class identifier */
 static char vendor_class_identifier[253] __initdata;
 
@@ -932,6 +934,13 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str
 		goto drop_unlock;
 	}
 
+	/* Is it a reply for the device we are configuring? */
+	if (b->xid != ic_dev_xid) {
+		if (net_ratelimit())
+			printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet \n");
+		goto drop_unlock;
+	}
+
 	/* Parse extensions */
 	if (ext_len >= 4 &&
 	    !memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */
@@ -1115,6 +1124,9 @@ static int __init ic_dynamic(void)
 	get_random_bytes(&timeout, sizeof(timeout));
 	timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM);
 	for (;;) {
+		/* Track the device we are configuring */
+		ic_dev_xid = d->xid;
+
 #ifdef IPCONFIG_BOOTP
 		if (do_bootp && (d->able & IC_BOOTP))
 			ic_bootp_send_if(d, jiffies - start_jiffies);
-- 
cgit v1.2.3


From 72876a603422d3767273ffb3918033fa1bfda0f3 Mon Sep 17 00:00:00 2001
From: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Date: Sun, 17 May 2009 20:48:59 -0700
Subject: mlx4_en: Fix not deleted napi structures

Napi structures are being created each time we open a port, but when
the port is closed the napi structure is only disabled but not removed.
This bug caused hang while removing the driver.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mlx4/en_cq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c
index 91f50de84be..a276125b709 100644
--- a/drivers/net/mlx4/en_cq.c
+++ b/drivers/net/mlx4/en_cq.c
@@ -125,8 +125,10 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
 
 	if (cq->is_tx)
 		del_timer(&cq->timer);
-	else
+	else {
 		napi_disable(&cq->napi);
+		netif_napi_del(&cq->napi);
+	}
 
 	mlx4_cq_free(mdev->dev, &cq->mcq);
 }
-- 
cgit v1.2.3


From a8f492c6ac6072d6c5bce4b2f13dc44612991051 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 16 May 2009 01:21:58 +0000
Subject: NET: Meth: Fix unsafe mix of irq and non-irq spinlocks.

Mixing of normal and irq spinlocks results in the following lockdep messages
on bootup on IP32:

[...]
Sending DHCP requests .
======================================================
[ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
2.6.30-rc5-00164-g41baeef #30
------------------------------------------------------
swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire:
 (&priv->meth_lock){+.+...}, at: [<ffffffff8026388c>] meth_tx+0x48/0x43c

and this task is already holding:
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c
which would create a new lock dependency:
 (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...}

but this new dependency connects a SOFTIRQ-irq-safe lock:
 (_xmit_ETHER#2){+.-...}
... which became SOFTIRQ-irq-safe at:
  [<ffffffff80061458>] __lock_acquire+0x784/0x1a14
  [<ffffffff800627e0>] lock_acquire+0xf8/0x150
  [<ffffffff800128d0>] _spin_lock+0x30/0x44
  [<ffffffff802d2b88>] dev_watchdog+0x70/0x398
  [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248
  [<ffffffff8003da5c>] __do_softirq+0xec/0x208
  [<ffffffff8003dbd8>] do_softirq+0x60/0xe4
  [<ffffffff8003dda0>] irq_exit+0x54/0x9c
  [<ffffffff80004420>] ret_from_irq+0x0/0x4
  [<ffffffff80004720>] r4k_wait+0x20/0x40
  [<ffffffff80015418>] cpu_idle+0x30/0x60
  [<ffffffff804cd934>] start_kernel+0x3ec/0x404

to a SOFTIRQ-irq-unsafe lock:
 (&priv->meth_lock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
...  [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14
  [<ffffffff800627e0>] lock_acquire+0xf8/0x150
  [<ffffffff800128d0>] _spin_lock+0x30/0x44
  [<ffffffff80263f20>] meth_reset+0x118/0x2d8
  [<ffffffff8026424c>] meth_open+0x28/0x140
  [<ffffffff802c1ae8>] dev_open+0xe0/0x18c
  [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4
  [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28
  [<ffffffff80012e68>] do_one_initcall+0x58/0x170
  [<ffffffff804cd190>] kernel_init+0x98/0x104
  [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18

other info that might help us debug this:

2 locks held by swapper/1:
 #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff802c0954>] dev_queue_xmit+0x1e0/0x4b0
 #1:  (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c

the SOFTIRQ-irq-safe lock's dependencies:
-> (_xmit_ETHER#2){+.-...} ops: 0 {
   HARDIRQ-ON-W at:
                        [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14
                        [<ffffffff800627e0>] lock_acquire+0xf8/0x150
                        [<ffffffff800128d0>] _spin_lock+0x30/0x44
                        [<ffffffff802d2b88>] dev_watchdog+0x70/0x398
                        [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248
                        [<ffffffff8003da5c>] __do_softirq+0xec/0x208
                        [<ffffffff8003dbd8>] do_softirq+0x60/0xe4
                        [<ffffffff8003dda0>] irq_exit+0x54/0x9c
                        [<ffffffff80004420>] ret_from_irq+0x0/0x4
                        [<ffffffff80004720>] r4k_wait+0x20/0x40
                        [<ffffffff80015418>] cpu_idle+0x30/0x60
                        [<ffffffff804cd934>] start_kernel+0x3ec/0x404
   IN-SOFTIRQ-W at:
                        [<ffffffff80061458>] __lock_acquire+0x784/0x1a14
                        [<ffffffff800627e0>] lock_acquire+0xf8/0x150
                        [<ffffffff800128d0>] _spin_lock+0x30/0x44
                        [<ffffffff802d2b88>] dev_watchdog+0x70/0x398
                        [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248
                        [<ffffffff8003da5c>] __do_softirq+0xec/0x208
                        [<ffffffff8003dbd8>] do_softirq+0x60/0xe4
                        [<ffffffff8003dda0>] irq_exit+0x54/0x9c
                        [<ffffffff80004420>] ret_from_irq+0x0/0x4
                        [<ffffffff80004720>] r4k_wait+0x20/0x40
                        [<ffffffff80015418>] cpu_idle+0x30/0x60
                        [<ffffffff804cd934>] start_kernel+0x3ec/0x404
   INITIAL USE at:
                       [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14
                       [<ffffffff800627e0>] lock_acquire+0xf8/0x150
                       [<ffffffff800128d0>] _spin_lock+0x30/0x44
                       [<ffffffff802d2b88>] dev_watchdog+0x70/0x398
                       [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248
                       [<ffffffff8003da5c>] __do_softirq+0xec/0x208
                       [<ffffffff8003dbd8>] do_softirq+0x60/0xe4
                       [<ffffffff8003dda0>] irq_exit+0x54/0x9c
                       [<ffffffff80004420>] ret_from_irq+0x0/0x4
                       [<ffffffff80004720>] r4k_wait+0x20/0x40
                       [<ffffffff80015418>] cpu_idle+0x30/0x60
                       [<ffffffff804cd934>] start_kernel+0x3ec/0x404
 }
 ... key      at: [<ffffffff80cf93f0>] netdev_xmit_lock_key+0x8/0x1c8

the SOFTIRQ-irq-unsafe lock's dependencies:
-> (&priv->meth_lock){+.+...} ops: 0 {
   HARDIRQ-ON-W at:
                        [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14
                        [<ffffffff800627e0>] lock_acquire+0xf8/0x150
                        [<ffffffff800128d0>] _spin_lock+0x30/0x44
                        [<ffffffff80263f20>] meth_reset+0x118/0x2d8
                        [<ffffffff8026424c>] meth_open+0x28/0x140
                        [<ffffffff802c1ae8>] dev_open+0xe0/0x18c
                        [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4
                        [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28
                        [<ffffffff80012e68>] do_one_initcall+0x58/0x170
                        [<ffffffff804cd190>] kernel_init+0x98/0x104
                        [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18
   SOFTIRQ-ON-W at:
                        [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14
                        [<ffffffff800627e0>] lock_acquire+0xf8/0x150
                        [<ffffffff800128d0>] _spin_lock+0x30/0x44
                        [<ffffffff80263f20>] meth_reset+0x118/0x2d8
                        [<ffffffff8026424c>] meth_open+0x28/0x140
                        [<ffffffff802c1ae8>] dev_open+0xe0/0x18c
                        [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4
                        [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28
                        [<ffffffff80012e68>] do_one_initcall+0x58/0x170
                        [<ffffffff804cd190>] kernel_init+0x98/0x104
                        [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18
   INITIAL USE at:
                       [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14
                       [<ffffffff800627e0>] lock_acquire+0xf8/0x150
                       [<ffffffff800128d0>] _spin_lock+0x30/0x44
                       [<ffffffff80263f20>] meth_reset+0x118/0x2d8
                       [<ffffffff8026424c>] meth_open+0x28/0x140
                       [<ffffffff802c1ae8>] dev_open+0xe0/0x18c
                       [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4
                       [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28
                       [<ffffffff80012e68>] do_one_initcall+0x58/0x170
                       [<ffffffff804cd190>] kernel_init+0x98/0x104
                       [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18
 }
 ... key      at: [<ffffffff80cf6ce8>] __key.32424+0x0/0x8

stack backtrace:
Call Trace:
[<ffffffff8000ed0c>] dump_stack+0x8/0x34
[<ffffffff80060b74>] check_usage+0x470/0x4a0
[<ffffffff80060c34>] check_irq_usage+0x90/0x130
[<ffffffff80061f78>] __lock_acquire+0x12a4/0x1a14
[<ffffffff800627e0>] lock_acquire+0xf8/0x150
[<ffffffff80012a0c>] _spin_lock_irqsave+0x60/0x84
[<ffffffff8026388c>] meth_tx+0x48/0x43c
[<ffffffff802d3a38>] __qdisc_run+0x150/0x30c
[<ffffffff802c0aa8>] dev_queue_xmit+0x334/0x4b0
[<ffffffff804e7e6c>] ip_auto_config+0x8d0/0xf28
[<ffffffff80012e68>] do_one_initcall+0x58/0x170
[<ffffffff804cd190>] kernel_init+0x98/0x104
[<ffffffff8001520c>] kernel_thread_helper+0x10/0x18

..... timed out!
IP-Config: Retrying forever (NFS root)...
Sending DHCP requests ., OK
[...]

Fixed by converting all locks to irq locks.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Andrew Randrianasulu <randrik_a@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/meth.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index aa08987f6e8..dbd3436912b 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -127,11 +127,11 @@ static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg)
 static int mdio_probe(struct meth_private *priv)
 {
 	int i;
-	unsigned long p2, p3;
+	unsigned long p2, p3, flags;
 	/* check if phy is detected already */
 	if(priv->phy_addr>=0&&priv->phy_addr<32)
 		return 0;
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 	for (i=0;i<32;++i){
 		priv->phy_addr=i;
 		p2=mdio_read(priv,2);
@@ -157,7 +157,7 @@ static int mdio_probe(struct meth_private *priv)
 			break;
 		}
 	}
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 	if(priv->phy_addr<32) {
 		return 0;
 	}
@@ -373,14 +373,14 @@ static int meth_release(struct net_device *dev)
 static void meth_rx(struct net_device* dev, unsigned long int_status)
 {
 	struct sk_buff *skb;
-	unsigned long status;
+	unsigned long status, flags;
 	struct meth_private *priv = netdev_priv(dev);
 	unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8;
 
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 	priv->dma_ctrl &= ~METH_DMA_RX_INT_EN;
 	mace->eth.dma_ctrl = priv->dma_ctrl;
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 
 	if (int_status & METH_INT_RX_UNDERFLOW) {
 		fifo_rptr = (fifo_rptr - 1) & 0x0f;
@@ -452,12 +452,12 @@ static void meth_rx(struct net_device* dev, unsigned long int_status)
 		mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write];
 		ADVANCE_RX_PTR(priv->rx_write);
 	}
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 	/* In case there was underflow, and Rx DMA was disabled */
 	priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN;
 	mace->eth.dma_ctrl = priv->dma_ctrl;
 	mace->eth.int_stat = METH_INT_RX_THRESHOLD;
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 }
 
 static int meth_tx_full(struct net_device *dev)
@@ -470,11 +470,11 @@ static int meth_tx_full(struct net_device *dev)
 static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
 {
 	struct meth_private *priv = netdev_priv(dev);
-	unsigned long status;
+	unsigned long status, flags;
 	struct sk_buff *skb;
 	unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16;
 
-	spin_lock(&priv->meth_lock);
+	spin_lock_irqsave(&priv->meth_lock, flags);
 
 	/* Stop DMA notification */
 	priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN);
@@ -527,12 +527,13 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
 	}
 
 	mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT;
-	spin_unlock(&priv->meth_lock);
+	spin_unlock_irqrestore(&priv->meth_lock, flags);
 }
 
 static void meth_error(struct net_device* dev, unsigned status)
 {
 	struct meth_private *priv = netdev_priv(dev);
+	unsigned long flags;
 
 	printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
 	/* check for errors too... */
@@ -547,7 +548,7 @@ static void meth_error(struct net_device* dev, unsigned status)
 		printk(KERN_WARNING "meth: Rx overflow\n");
 	if (status & (METH_INT_RX_UNDERFLOW)) {
 		printk(KERN_WARNING "meth: Rx underflow\n");
-		spin_lock(&priv->meth_lock);
+		spin_lock_irqsave(&priv->meth_lock, flags);
 		mace->eth.int_stat = METH_INT_RX_UNDERFLOW;
 		/* more underflow interrupts will be delivered,
 		 * effectively throwing us into an infinite loop.
@@ -555,7 +556,7 @@ static void meth_error(struct net_device* dev, unsigned status)
 		priv->dma_ctrl &= ~METH_DMA_RX_EN;
 		mace->eth.dma_ctrl = priv->dma_ctrl;
 		DPRINTK("Disabled meth Rx DMA temporarily\n");
-		spin_unlock(&priv->meth_lock);
+		spin_unlock_irqrestore(&priv->meth_lock, flags);
 	}
 	mace->eth.int_stat = METH_INT_ERROR;
 }
-- 
cgit v1.2.3


From a598f6aebea2481531b0757ed90cfb0d8cf1d8f5 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Fri, 15 May 2009 06:10:13 +0000
Subject: bridge: relay bridge multicast pkgs if !STP

Currently the bridge catches all STP packets; even if STP is turned
off.  This prevents other systems (which do have STP turned on)
from being able to detect loops in the network.

With this patch, if STP is off, then any packet sent to the STP
multicast group address is forwarded to all ports.

Based on earlier patch by Joakim Tjernlund with changes
to go through forwarding (not local chain), and optimization
that only last octet needs to be checked.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_input.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 30b88777c3d..5ee1a3682bf 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -134,6 +134,10 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb)
 		if (skb->protocol == htons(ETH_P_PAUSE))
 			goto drop;
 
+		/* If STP is turned off, then forward */
+		if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0)
+			goto forward;
+
 		if (NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
 			    NULL, br_handle_local_finish))
 			return NULL;	/* frame consumed by filter */
@@ -141,6 +145,7 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb)
 			return skb;	/* continue processing */
 	}
 
+forward:
 	switch (p->state) {
 	case BR_STATE_FORWARDING:
 		rhook = rcu_dereference(br_should_route_hook);
-- 
cgit v1.2.3


From 4f0611af47e25807cf18cd2b4d4e94206c75b29e Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Fri, 15 May 2009 06:11:58 +0000
Subject: bridge: fix initial packet flood if !STP

If bridge is configured with no STP and forwarding delay of 0 (which
is typical for virtualization) then when link starts it will flood all
packets for the first 20 seconds.

This bug was introduced by a combination of earlier changes:
  * forwarding database uses hold time of zero to indicate
    user wants to always flood packets
  * optimzation of the case of forwarding delay of 0 avoids the initial
    timer tick

The fix is to just skip all the topology change detection code if
kernel STP is not being used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_stp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 6e63ec3f1fc..0660515f399 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -297,6 +297,9 @@ void br_topology_change_detection(struct net_bridge *br)
 {
 	int isroot = br_is_root_bridge(br);
 
+	if (br->stp_enabled != BR_KERNEL_STP)
+		return;
+
 	pr_info("%s: topology change detected, %s\n", br->dev->name,
 		isroot ? "propagating" : "sending tcn bpdu");
 
-- 
cgit v1.2.3


From 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Fri, 15 May 2009 08:44:32 +0000
Subject: bonding: fix link down handling in 802.3ad mode

One of the purposes of bonding is to allow for redundant links, and failover
correctly if the cable is pulled. If all the members of a bonded device have
no carrier present, the bonded device itself needs to report no carrier present
to user space so management tools (like routing daemons) can respond.

Bonding in 802.3ad mode does not work correctly for this because it incorrectly
chooses a link that is down as a possible aggregator.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_3ad.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 8c2e5ab51f0..faf094abef7 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1465,6 +1465,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best,
 	return best;
 }
 
+static int agg_device_up(const struct aggregator *agg)
+{
+	return (netif_running(agg->slave->dev) &&
+		netif_carrier_ok(agg->slave->dev));
+}
+
 /**
  * ad_agg_selection_logic - select an aggregation group for a team
  * @aggregator: the aggregator we're looking at
@@ -1496,14 +1502,13 @@ static void ad_agg_selection_logic(struct aggregator *agg)
 	struct port *port;
 
 	origin = agg;
-
 	active = __get_active_agg(agg);
-	best = active;
+	best = (active && agg_device_up(active)) ? active : NULL;
 
 	do {
 		agg->is_active = 0;
 
-		if (agg->num_of_ports)
+		if (agg->num_of_ports && agg_device_up(agg))
 			best = ad_agg_selection_test(best, agg);
 
 	} while ((agg = __get_next_agg(agg)));
-- 
cgit v1.2.3


From eb0519b5a1cf07d5a1b919cffa0304cdaaa97a7e Mon Sep 17 00:00:00 2001
From: Gabriel Paubert <paubert@iram.es>
Date: Sun, 17 May 2009 21:16:47 -0700
Subject: mv643xx_eth: fix PPC DMA breakage

After 2.6.29, PPC no more admits passing NULL to the dev parameter of
the DMA API. The result is a BUG followed by solid lock-up when the
mv643xx_eth driver brings an interface up. The following patch makes
the driver work on my Pegasos again; it is mostly a search and replace
of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping
functions.

Signed-off-by: Gabriel Paubert <paubert@iram.es>
Acked-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/mv643xx_eth.c | 41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index a400d7115f7..6bb5af35eda 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -569,7 +569,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 		if (rxq->rx_curr_desc == rxq->rx_ring_size)
 			rxq->rx_curr_desc = 0;
 
-		dma_unmap_single(NULL, rx_desc->buf_ptr,
+		dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr,
 				 rx_desc->buf_size, DMA_FROM_DEVICE);
 		rxq->rx_desc_count--;
 		rx++;
@@ -678,8 +678,9 @@ static int rxq_refill(struct rx_queue *rxq, int budget)
 
 		rx_desc = rxq->rx_desc_area + rx;
 
-		rx_desc->buf_ptr = dma_map_single(NULL, skb->data,
-					mp->skb_size, DMA_FROM_DEVICE);
+		rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent,
+						  skb->data, mp->skb_size,
+						  DMA_FROM_DEVICE);
 		rx_desc->buf_size = mp->skb_size;
 		rxq->rx_skb[rx] = skb;
 		wmb();
@@ -718,6 +719,7 @@ static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
 
 static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
 {
+	struct mv643xx_eth_private *mp = txq_to_mp(txq);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
 	int frag;
 
@@ -746,10 +748,10 @@ static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
 
 		desc->l4i_chk = 0;
 		desc->byte_cnt = this_frag->size;
-		desc->buf_ptr = dma_map_page(NULL, this_frag->page,
-						this_frag->page_offset,
-						this_frag->size,
-						DMA_TO_DEVICE);
+		desc->buf_ptr = dma_map_page(mp->dev->dev.parent,
+					     this_frag->page,
+					     this_frag->page_offset,
+					     this_frag->size, DMA_TO_DEVICE);
 	}
 }
 
@@ -826,7 +828,8 @@ no_csum:
 
 	desc->l4i_chk = l4i_chk;
 	desc->byte_cnt = length;
-	desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
+	desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data,
+				       length, DMA_TO_DEVICE);
 
 	__skb_queue_tail(&txq->tx_skb, skb);
 
@@ -956,10 +959,10 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force)
 		}
 
 		if (cmd_sts & TX_FIRST_DESC) {
-			dma_unmap_single(NULL, desc->buf_ptr,
+			dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr,
 					 desc->byte_cnt, DMA_TO_DEVICE);
 		} else {
-			dma_unmap_page(NULL, desc->buf_ptr,
+			dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr,
 				       desc->byte_cnt, DMA_TO_DEVICE);
 		}
 
@@ -1894,9 +1897,9 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index)
 						mp->rx_desc_sram_size);
 		rxq->rx_desc_dma = mp->rx_desc_sram_addr;
 	} else {
-		rxq->rx_desc_area = dma_alloc_coherent(NULL, size,
-							&rxq->rx_desc_dma,
-							GFP_KERNEL);
+		rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+						       size, &rxq->rx_desc_dma,
+						       GFP_KERNEL);
 	}
 
 	if (rxq->rx_desc_area == NULL) {
@@ -1947,7 +1950,7 @@ out_free:
 	if (index == 0 && size <= mp->rx_desc_sram_size)
 		iounmap(rxq->rx_desc_area);
 	else
-		dma_free_coherent(NULL, size,
+		dma_free_coherent(mp->dev->dev.parent, size,
 				  rxq->rx_desc_area,
 				  rxq->rx_desc_dma);
 
@@ -1979,7 +1982,7 @@ static void rxq_deinit(struct rx_queue *rxq)
 	    rxq->rx_desc_area_size <= mp->rx_desc_sram_size)
 		iounmap(rxq->rx_desc_area);
 	else
-		dma_free_coherent(NULL, rxq->rx_desc_area_size,
+		dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size,
 				  rxq->rx_desc_area, rxq->rx_desc_dma);
 
 	kfree(rxq->rx_skb);
@@ -2007,9 +2010,9 @@ static int txq_init(struct mv643xx_eth_private *mp, int index)
 						mp->tx_desc_sram_size);
 		txq->tx_desc_dma = mp->tx_desc_sram_addr;
 	} else {
-		txq->tx_desc_area = dma_alloc_coherent(NULL, size,
-							&txq->tx_desc_dma,
-							GFP_KERNEL);
+		txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+						       size, &txq->tx_desc_dma,
+						       GFP_KERNEL);
 	}
 
 	if (txq->tx_desc_area == NULL) {
@@ -2053,7 +2056,7 @@ static void txq_deinit(struct tx_queue *txq)
 	    txq->tx_desc_area_size <= mp->tx_desc_sram_size)
 		iounmap(txq->tx_desc_area);
 	else
-		dma_free_coherent(NULL, txq->tx_desc_area_size,
+		dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size,
 				  txq->tx_desc_area, txq->tx_desc_dma);
 }
 
-- 
cgit v1.2.3


From d77dd8d27e73a9277096453eb901aae0bfd4ca3c Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Fri, 15 May 2009 10:19:51 +0000
Subject: Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR?

FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Ram Vepa <ram.vepa@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/vxge/vxge-traffic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index 7be0ae10d69..c2eeac4125f 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -115,7 +115,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp)
 		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON|
 		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON|
 		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR|
-		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32),
+		VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32),
 		&vp_reg->kdfcctl_errors_mask);
 
 	__vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask);
-- 
cgit v1.2.3


From 705efc3b03cbee449e4d83b230423894152f7982 Mon Sep 17 00:00:00 2001
From: Wang Tinggong <wangtinggong@gmail.com>
Date: Thu, 14 May 2009 22:49:36 +0000
Subject: Doc: fixed descriptions on /proc/sys/net/core/* and
 /proc/sys/net/unix/*

Signed-off-by: Wang Tinggong <wangtinggong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/ip-sysctl.txt | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ec5de02f543..b121c5db707 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
 	See tcp_wmem for a description.
 
-UNDOCUMENTED:
 
 /proc/sys/net/core/*
-	dev_weight FIXME
+dev_weight - INTEGER
+	The maximum number of packets that kernel can handle on a NAPI
+	interrupt, it's a Per-CPU variable.
+
+	Default: 64
 
 /proc/sys/net/unix/*
-	max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+	The maximum length of dgram socket receive queue
+
+	Default: 10
+
+
+UNDOCUMENTED:
 
 /proc/sys/net/irda/*
 	fast_poll_increase FIXME
-- 
cgit v1.2.3


From af3e4aca47d2e05a545a5e10ba5c7193e0b665e0 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Thu, 30 Apr 2009 10:59:19 +0000
Subject: powerpc: Do not assert pte_locked for hugepage PTE entries

With CONFIG_DEBUG_VM, an assertion is made when changing the protection
flags of a PTE that the PTE is locked. Huge pages use a different pagetable
format and the assertion is bogus and will always trigger with a bug looking
something like

 Unable to handle kernel paging request for data at address 0xf1a00235800006f8
 Faulting instruction address: 0xc000000000034a80
 Oops: Kernel access of bad area, sig: 11 [#1]
 SMP NR_CPUS=32 NUMA Maple
 Modules linked in: dm_snapshot dm_mirror dm_region_hash
  dm_log dm_mod loop evdev ext3 jbd mbcache sg sd_mod ide_pci_generic
  pata_amd ata_generic ipr libata tg3 libphy scsi_mod windfarm_pid
  windfarm_smu_sat windfarm_max6690_sensor windfarm_lm75_sensor
  windfarm_cpufreq_clamp windfarm_core i2c_powermac
 NIP: c000000000034a80 LR: c000000000034b18 CTR: 0000000000000003
 REGS: c000000003037600 TRAP: 0300   Not tainted (2.6.30-rc3-autokern1)
 MSR: 9000000000009032 <EE,ME,IR,DR>  CR: 28002484  XER: 200fffff
 DAR: f1a00235800006f8, DSISR: 0000000040010000
 TASK = c0000002e54cc740[2960] 'map_high_trunca' THREAD: c000000003034000 CPU: 2
 GPR00: 4000000000000000 c000000003037880 c000000000895d30 c0000002e5a2e500
 GPR04: 00000000a0000000 c0000002edc40880 0000005700000393 0000000000000001
 GPR08: f000000011ac0000 01a00235800006e8 00000000000000f5 f1a00235800006e8
 GPR12: 0000000028000484 c0000000008dd780 0000000000001000 0000000000000000
 GPR16: fffffffffffff000 0000000000000000 00000000a0000000 c000000003037a20
 GPR20: c0000002e5f4ece8 0000000000001000 c0000002edc40880 0000000000000000
 GPR24: c0000002e5f4ece8 0000000000000000 00000000a0000000 c0000002e5f4ece8
 GPR28: 0000005700000393 c0000002e5a2e500 00000000a0000000 c000000003037880
 NIP [c000000000034a80] .assert_pte_locked+0xa4/0xd0
 LR [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4
 Call Trace:
 [c000000003037880] [c000000003037990] 0xc000000003037990 (unreliable)
 [c000000003037910] [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4
 [c0000000030379b0] [c00000000014bef8] .hugetlb_cow+0x124/0x674
 [c000000003037b00] [c00000000014c930] .hugetlb_fault+0x4e8/0x6f8
 [c000000003037c00] [c00000000013443c] .handle_mm_fault+0xac/0x828
 [c000000003037cf0] [c0000000000340a8] .do_page_fault+0x39c/0x584
 [c000000003037e30] [c0000000000057b0] handle_page_fault+0x20/0x5c
 Instruction dump:
 7d29582a 7d200074 7800d182 0b000000 3c004000 3960ffff 780007c6 796b00c4
 7d290214 7929a302 1d290068 7d6b4a14 <800b0010> 7c000074 7800d182 0b000000

This patch fixes the problem by not asseting the PTE is locked for VMAs
backed by huge pages.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index f5c6fd42265..ae1d67cc090 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 		entry = do_dcache_icache_coherency(entry);
 	changed = !pte_same(*(ptep), entry);
 	if (changed) {
-		assert_pte_locked(vma->vm_mm, address);
+		if (!(vma->vm_flags & VM_HUGETLB))
+			assert_pte_locked(vma->vm_mm, address);
 		__ptep_set_access_flags(ptep, entry);
 		flush_tlb_page_nohash(vma, address);
 	}
-- 
cgit v1.2.3


From 021376a3b655364c92c10be544a3319946a792e8 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 13 May 2009 20:30:24 +0000
Subject: powerpc/ftrace: Use pr_devel() in ftrace.c

pr_debug() can now result in code being generated even when #DEBUG
is not defined. That's not really desirable in the ftrace code
which we want to be snappy.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text	   data	    bss	    dec	    hex	filename
   3334	    672	      4	   4010	    faa	arch/powerpc/kernel/ftrace.o

size after:
   text	   data	    bss	    dec	    hex	filename
   2616	    360	      4	   2980	    ba4	arch/powerpc/kernel/ftrace.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/ftrace.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 70e2a736be1..5b078ee391f 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod,
 	 * 0xe8, 0x4c, 0x00, 0x28,    ld      r2,40(r12)
 	 */
 
-	pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+	pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
 
 	/* Find where the trampoline jumps to */
 	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod,
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x", jmp[0], jmp[1]);
 
 	/* verify that this is what we expect it to be */
 	if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
@@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod,
 	offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
 		(int)((short)jmp[1]);
 
-	pr_debug(" %x ", offset);
+	pr_devel(" %x ", offset);
 
 	/* get the address this jumps too */
 	tramp = mod->arch.toc + offset + 32;
-	pr_debug("toc: %lx", tramp);
+	pr_devel("toc: %lx", tramp);
 
 	if (probe_kernel_read(jmp, (void *)tramp, 8)) {
 		printk(KERN_ERR "Failed to read %lx\n", tramp);
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
 
 	ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
 
@@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod,
 	 *  0x4e, 0x80, 0x04, 0x20  bctr
 	 */
 
-	pr_debug("ip:%lx jumps to %lx", ip, tramp);
+	pr_devel("ip:%lx jumps to %lx", ip, tramp);
 
 	/* Find where the trampoline jumps to */
 	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod,
 		return -EFAULT;
 	}
 
-	pr_debug(" %08x %08x ", jmp[0], jmp[1]);
+	pr_devel(" %08x %08x ", jmp[0], jmp[1]);
 
 	/* verify that this is what we expect it to be */
 	if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
@@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod,
 	if (tramp & 0x8000)
 		tramp -= 0x10000;
 
-	pr_debug(" %lx ", tramp);
+	pr_devel(" %lx ", tramp);
 
 	if (tramp != addr) {
 		printk(KERN_ERR
@@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	/* ld r2,40(r1) */
 	op[1] = 0xe8410028;
 
-	pr_debug("write to %lx\n", rec->ip);
+	pr_devel("write to %lx\n", rec->ip);
 
 	if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
 		return -EPERM;
@@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 		return -EINVAL;
 	}
 
-	pr_debug("write to %lx\n", rec->ip);
+	pr_devel("write to %lx\n", rec->ip);
 
 	if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
 		return -EPERM;
-- 
cgit v1.2.3


From c3cf8667ed7db58c1960958cbb0a9098d513cc60 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Fri, 15 May 2009 04:33:54 +0000
Subject: powerpc/ftrace: Fix constraint to be early clobber

After upgrading my distcc boxes from gcc 4.2.2 to 4.4.0, the function
graph tracer broke. This was discovered on my x86 boxes.

The issue is that gcc used the same register for an output as it did for
an input in an asm statement. I first thought this was a bug in gcc and
reported it. I was notified that gcc was correct and that the output had
to be flagged as an "early clobber".

I noticed that powerpc had the same issue and this patch fixes it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 5b078ee391f..2d182f119d1 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 			PPC_LONG "2b,4b\n"
 		".previous"
 
-		: [old] "=r" (old), [faulted] "=r" (faulted)
+		: [old] "=&r" (old), [faulted] "=r" (faulted)
 		: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
 		: "memory"
 	);
-- 
cgit v1.2.3


From dc892288f42661a140124ecbf9d44850a95de222 Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Fri, 15 May 2009 08:01:59 +0000
Subject: powerpc/ps3: Update ps3_defconfig

Refresh and set these options:

 CONFIG_SYSFS_DEPRECATED_V2: y -> n
 CONFIG_INPUT_JOYSTICK:      y -> n
 CONFIG_HID_SONY:            n -> m
 CONFIG_RTC_DRV_PS3:         - -> m

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ps3_defconfig | 105 ++++++++++++++++++++++---------------
 1 file changed, 62 insertions(+), 43 deletions(-)

diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index ac14f5245d2..e28e65e7a0e 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 09:28:45 2009
+# Linux kernel version: 2.6.30-rc5
+# Fri May 15 10:37:00 2009
 #
 CONFIG_PPC64=y
 
 #
 # Processor support
 #
+CONFIG_PPC_BOOK3S=y
 # CONFIG_POWER4_ONLY is not set
 CONFIG_POWER3=y
 CONFIG_POWER4=y
@@ -55,9 +56,11 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -72,6 +75,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
@@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y
 # CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
@@ -316,7 +326,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
@@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
@@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_UEVENT is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
@@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
@@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
@@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-# CONFIG_HID_COMPAT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
 # CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
@@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
 # CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
+CONFIG_HID_SONY=m
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_GREENASIA_FF is not set
 # CONFIG_HID_TOPSEED is not set
@@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_PPC=m
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_PS3=m
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1160,6 +1160,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1371,18 +1384,21 @@ CONFIG_TRACING=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #
-- 
cgit v1.2.3


From 0e337b42d620ca7c45fe64e64dd71957c56216c9 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sun, 17 May 2009 18:29:03 +0000
Subject: powerpc: Explicit alignment for .data.cacheline_aligned

I don't think anything guarantees that the objects in data.page_aligned
are a multiple of PAGE_SIZE, thus the section may end on any boundary.

So the following section, .data.cacheline_aligned needs an explicit
alignment.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index a047a6cfca4..8ef8a14abc9 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -264,6 +264,7 @@ SECTIONS
 		*(.data.page_aligned)
 	}
 
+	. = ALIGN(L1_CACHE_BYTES);
 	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
 		*(.data.cacheline_aligned)
 	}
-- 
cgit v1.2.3


From 5b4662f098b47f68d7fcea9b065d1513547fef12 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 15 May 2009 14:50:33 -0400
Subject: regulator: da903x: add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Liam Girdwood <lrg@slimlogic.co.uk>
CC: Mike Rapoport <mike@compulab.co.il>
CC: Eric Miao <eric.miao@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/da903x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 72b15495183..c6628f5a0af 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -497,7 +497,7 @@ static struct platform_driver da903x_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= da903x_regulator_probe,
-	.remove		= da903x_regulator_remove,
+	.remove		= __devexit_p(da903x_regulator_remove),
 };
 
 static int __init da903x_regulator_init(void)
-- 
cgit v1.2.3


From eb33575cf67d3f35fa2510210ef92631266e2465 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Wed, 13 May 2009 17:34:48 +0100
Subject: [ARM] Double check memmap is actually valid with a memmap has
 unexpected holes V2

pfn_valid() is meant to be able to tell if a given PFN has valid memmap
associated with it or not. In FLATMEM, it is expected that holes always
have valid memmap as long as there is valid PFNs either side of the hole.
In SPARSEMEM, it is assumed that a valid section has a memmap for the
entire section.

However, ARM and maybe other embedded architectures in the future free
memmap backing holes to save memory on the assumption the memmap is never
used. The page_zone linkages are then broken even though pfn_valid()
returns true. A walker of the full memmap must then do this additional
check to ensure the memmap they are looking at is sane by making sure the
zone and PFN linkages are still valid. This is expensive, but walkers of
the full memmap are extremely rare.

This was caught before for FLATMEM and hacked around but it hits again for
SPARSEMEM because the page_zone linkages can look ok where the PFN linkages
are totally screwed. This looks like a hatchet job but the reality is that
any clean solution would end up consumning all the memory saved by punching
these unexpected holes in the memmap. For example, we tried marking the
memmap within the section invalid but the section size exceeds the size of
the hole in most cases so pfn_valid() starts returning false where valid
memmap exists. Shrinking the size of the section would increase memory
consumption offsetting the gains.

This patch identifies when an architecture is punching unexpected holes
in the memmap that the memory model cannot automatically detect and sets
ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx
which is the model sub-architecture this has been reported on but may expand
later. When set, walkers of the full memmap must call memmap_valid_within()
for each PFN and passing in what it expects the page and zone to be for
that PFN. If it finds the linkages to be broken, it assumes the memmap is
invalid for that PFN.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig       |  6 +++---
 include/linux/mmzone.h | 26 ++++++++++++++++++++++++++
 mm/mmzone.c            | 15 +++++++++++++++
 mm/vmstat.c            | 19 ++++---------------
 4 files changed, 48 insertions(+), 18 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e60ec54df33..9d02cdb15b2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -273,6 +273,7 @@ config ARCH_EP93XX
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -976,10 +977,9 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default y
-	depends on FLATMEM
+	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 186ec6ab334..a47c879e130 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1097,6 +1097,32 @@ unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
 #define pfn_valid_within(pfn) (1)
 #endif
 
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+/*
+ * pfn_valid() is meant to be able to tell if a given PFN has valid memmap
+ * associated with it or not. In FLATMEM, it is expected that holes always
+ * have valid memmap as long as there is valid PFNs either side of the hole.
+ * In SPARSEMEM, it is assumed that a valid section has a memmap for the
+ * entire section.
+ *
+ * However, an ARM, and maybe other embedded architectures in the future
+ * free memmap backing holes to save memory on the assumption the memmap is
+ * never used. The page_zone linkages are then broken even though pfn_valid()
+ * returns true. A walker of the full memmap must then do this additional
+ * check to ensure the memmap they are looking at is sane by making sure
+ * the zone and PFN linkages are still valid. This is expensive, but walkers
+ * of the full memmap are extremely rare.
+ */
+int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone);
+#else
+static inline int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone)
+{
+	return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
+
 #endif /* !__GENERATING_BOUNDS.H */
 #endif /* !__ASSEMBLY__ */
 #endif /* _LINUX_MMZONE_H */
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 16ce8b955dc..f5b7d176021 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -6,6 +6,7 @@
 
 
 #include <linux/stddef.h>
+#include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/module.h>
 
@@ -72,3 +73,17 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
 	*zone = zonelist_zone(z);
 	return z;
 }
+
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone)
+{
+	if (page_to_pfn(page) != pfn)
+		return 0;
+
+	if (page_zone(page) != zone)
+		return 0;
+
+	return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 66f6130976c..74d66dba0cb 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -509,22 +509,11 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m,
 			continue;
 
 		page = pfn_to_page(pfn);
-#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
-		/*
-		 * Ordinarily, memory holes in flatmem still have a valid
-		 * memmap for the PFN range. However, an architecture for
-		 * embedded systems (e.g. ARM) can free up the memmap backing
-		 * holes to save memory on the assumption the memmap is
-		 * never used. The page_zone linkages are then broken even
-		 * though pfn_valid() returns true. Skip the page if the
-		 * linkages are broken. Even if this test passed, the impact
-		 * is that the counters for the movable type are off but
-		 * fragmentation monitoring is likely meaningless on small
-		 * systems.
-		 */
-		if (page_zone(page) != zone)
+
+		/* Watch for unexpected holes punched in the memmap */
+		if (!memmap_valid_within(pfn, page, zone))
 			continue;
-#endif
+
 		mtype = get_pageblock_migratetype(page);
 
 		if (mtype < MIGRATE_TYPES)
-- 
cgit v1.2.3


From 8190b37f6483fedc530110d8c7d710d1c0317ba4 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Tue, 12 May 2009 13:36:46 -0700
Subject: [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-l7200/include/mach/sys-clock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
index 2d7722be60e..e9729a35751 100644
--- a/arch/arm/mach-l7200/include/mach/sys-clock.h
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -18,7 +18,7 @@
 
 /* IO_START and IO_BASE are defined in hardware.h */
 
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
 #define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
 
 /* Define the interface to the SYS_CLOCK */
-- 
cgit v1.2.3


From 3026589c1bc17b0c389b95afec127e92e2a745e2 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 11 May 2009 09:24:47 +0200
Subject: microblaze: Update Microblaze defconfig

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/configs/nommu_defconfig | 50 +++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index beb7ecd7279..4ef6af0a8f3 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Mar 24 10:23:20 2009
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
@@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -80,6 +82,8 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
 # Exectuable file formats
@@ -180,7 +185,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -562,6 +569,11 @@ CONFIG_FILE_LOCKING=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -601,8 +613,13 @@ CONFIG_CRAMFS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_HEART_BEAT=y
@@ -777,6 +789,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -784,6 +797,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 7b7210d7a9d260becef4dba98b9075e2c9b41f93 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 14 May 2009 13:35:52 +0200
Subject: microblaze: Fix kind-of-intr checking against number of interrupts

+ Fix typographic fault.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/intc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index a69d3e3c2fd..b15605299a5 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -137,8 +137,8 @@ void __init init_IRQ(void)
 
 	intr_type =
 		*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
-	if (intr_type >= (1 << nr_irq))
-		printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+	if (intr_type >= (1 << (nr_irq + 1)))
+		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 
 #ifdef CONFIG_SELFMOD_INTC
 	selfmod_function((int *) arr_func, intc_baseaddr);
-- 
cgit v1.2.3


From bac9caf016bf147af7d3afbe7580a7f773cb1566 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sun, 17 May 2009 18:18:58 -0700
Subject: asm-generic: fix local_add_unless macro

`local_add_unless(x, y, z)' will be expanded to `(&(x)->y, (y), (x))', but
`&(x)->y' should be `&(x)->a'

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/local.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h
index dbd6150763e..fc218444e31 100644
--- a/include/asm-generic/local.h
+++ b/include/asm-generic/local.h
@@ -42,7 +42,7 @@ typedef struct
 
 #define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n))
 #define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n))
-#define local_add_unless(l, a, u) atomic_long_add_unless((&(l)->a), (a), (u))
+#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u))
 #define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a)
 
 /* Non-atomic variants, ie. preemption disabled and won't be touched
-- 
cgit v1.2.3


From dbf8c11f821b6ff83302c34f2403b4f7231f50ae Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Mon, 18 May 2009 11:13:54 +0100
Subject: mtd_dataflash: unbreak erase support

Commit 5b7f3a50 (fix dataflash 64-bit divisions) unfortunately
introduced a typo. Erase addr and len were swapped in the pageaddr
calculation, causing the wrong sectors to get erased.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mtd/devices/mtd_dataflash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 62dee54af0a..43976aa4dbb 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 		/* Calculate flash page address; use block erase (for speed) if
 		 * we're at a block boundary and need to erase the whole block.
 		 */
-		pageaddr = div_u64(instr->len, priv->page_size);
+		pageaddr = div_u64(instr->addr, priv->page_size);
 		do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
 		pageaddr = pageaddr << priv->page_offset;
 
-- 
cgit v1.2.3


From 80193195f87ebca6d7417516d6edeb3969631c15 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Mon, 18 May 2009 13:07:35 +0100
Subject: Fix oops on close of hot-unplugged FTDI serial converter

Commit c45d6320 ("fix reference counting of ftdi_private") stopped
ftdi_sio_port_remove() from directly freeing the port-private data, with
the intention if the port was still open, it would be freed when
ftdi_close() is eventually called and releases the last refcount on the
structure.

That's all very well, but ftdi_sio_port_remove() still contains a call
to usb_set_serial_port_data(port, NULL) -- so by the time we get to
ftdi_close() for the port which was unplugged, it _still_ oopses on
dereferencing that NULL pointer, as it did before (and does in 2.6.29).

The fix is just not to clear the private data in ftdi_sio_port_remove().
Then the refcount is properly reduced to zero when the final kref_put()
happens in ftdi_close().

Remove a bogus comment too, while we're at it. And stop doing things
inside "if (priv)" -- it must _always_ be there.

Based loosely on an earlier patch by Daniel Mack, and suggestions by
Alan Stern.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ftdi_sio.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0ab8474b00c..d9fcdaedf38 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1487,14 +1487,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 	remove_sysfs_attrs(port);
 
-	/* all open ports are closed at this point
-	 *    (by usbserial.c:__serial_close, which calls ftdi_close)
-	 */
-
-	if (priv) {
-		usb_set_serial_port_data(port, NULL);
-		kref_put(&priv->kref, ftdi_sio_priv_release);
-	}
+	kref_put(&priv->kref, ftdi_sio_priv_release);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 982db66352d31892f624390cfb64a1cea5df765a Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Mon, 18 May 2009 17:29:30 +0100
Subject: [ARM] 5518/1: versatile: don't put clock lookups in __initdata

Remove the __initdata annotation for the clock lookups, since they
will be needed when loading modules which use clk_get().

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-versatile/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1f929c391af..b3bebcc5623 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -413,7 +413,7 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,
-- 
cgit v1.2.3


From a93ea9b357a4d4fce9a1f65bf9c152fb67c30716 Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Mon, 18 May 2009 17:26:08 +0100
Subject: [ARM] 5517/1: integrator: don't put clock lookups in __initdata

Remove the __initdata annotation for the clock lookups, since they
will be needed when loading modules which use clk_get().

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-integrator/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 6f887291307..a0f60e55da6 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -121,7 +121,7 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,
-- 
cgit v1.2.3


From 775273131810caa41dfc7f9e552ea5d8508caf40 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Sun, 10 May 2009 20:32:34 +0000
Subject: tcp: fix MSG_PEEK race check
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 518a09ef11 (tcp: Fix recvmsg MSG_PEEK influence of
blocking behavior) lets the loop run longer than the race check
did previously expect, so we need to be more careful with this
check and consider the work we have been doing.

I tried my best to deal with urg hole madness too which happens
here:
	if (!sock_flag(sk, SOCK_URGINLINE)) {
		++*seq;
		...
by using additional offset by one but I certainly have very
little interest in testing that part.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Frans Pop <elendil@planet.nl>
Tested-by: Ian Zimmermann <itz@buug.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 1d7f49c6f0c..7a0f0b27bf1 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1321,6 +1321,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	struct task_struct *user_recv = NULL;
 	int copied_early = 0;
 	struct sk_buff *skb;
+	u32 urg_hole = 0;
 
 	lock_sock(sk);
 
@@ -1532,7 +1533,8 @@ do_prequeue:
 				}
 			}
 		}
-		if ((flags & MSG_PEEK) && peek_seq != tp->copied_seq) {
+		if ((flags & MSG_PEEK) &&
+		    (peek_seq - copied - urg_hole != tp->copied_seq)) {
 			if (net_ratelimit())
 				printk(KERN_DEBUG "TCP(%s:%d): Application bug, race in MSG_PEEK.\n",
 				       current->comm, task_pid_nr(current));
@@ -1553,6 +1555,7 @@ do_prequeue:
 				if (!urg_offset) {
 					if (!sock_flag(sk, SOCK_URGINLINE)) {
 						++*seq;
+						urg_hole++;
 						offset++;
 						used--;
 						if (!used)
-- 
cgit v1.2.3


From c0f84d0d4be3f7d818b4ffb04d27f9bae64397f0 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <dada1@cosmosbay.com>
Date: Mon, 18 May 2009 15:12:31 -0700
Subject: sch_teql: should not dereference skb after ndo_start_xmit()

It is illegal to dereference a skb after a successful ndo_start_xmit()
call. We must store skb length in a local variable instead.

Bug was introduced in 2.6.27 by commit 0abf77e55a2459aa9905be4b226e4729d5b4f0cb
(net_sched: Add accessor function for packet length for qdiscs)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_teql.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index ec697cebb63..3b641829723 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -303,6 +303,8 @@ restart:
 		switch (teql_resolve(skb, skb_res, slave)) {
 		case 0:
 			if (__netif_tx_trylock(slave_txq)) {
+				unsigned int length = qdisc_pkt_len(skb);
+
 				if (!netif_tx_queue_stopped(slave_txq) &&
 				    !netif_tx_queue_frozen(slave_txq) &&
 				    slave_ops->ndo_start_xmit(skb, slave) == 0) {
@@ -310,8 +312,7 @@ restart:
 					master->slaves = NEXT_SLAVE(q);
 					netif_wake_queue(dev);
 					master->stats.tx_packets++;
-					master->stats.tx_bytes +=
-						qdisc_pkt_len(skb);
+					master->stats.tx_bytes += length;
 					return 0;
 				}
 				__netif_tx_unlock(slave_txq);
-- 
cgit v1.2.3


From c4ca2374312b4de819dd700e72a68395eddb5fcb Mon Sep 17 00:00:00 2001
From: Ajit Khaparde <ajitk@serverengines.com>
Date: Mon, 18 May 2009 15:38:55 -0700
Subject: be2net: add two new pci device ids to pci device table

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/benet/be.h      | 14 ++++++++++++++
 drivers/net/benet/be_main.c | 10 +++++-----
 2 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index c49ddd08b2a..b4bb06fdf30 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -35,8 +35,22 @@
 #define DRV_VER			"2.0.348"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
+#define OC_NAME			"Emulex OneConnect 10Gbps NIC"
 #define DRV_DESC		BE_NAME "Driver"
 
+#define BE_VENDOR_ID 		0x19a2
+#define BE_DEVICE_ID1		0x211
+#define OC_DEVICE_ID1		0x700
+#define OC_DEVICE_ID2		0x701
+
+static inline char *nic_name(struct pci_dev *pdev)
+{
+	if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2)
+		return OC_NAME;
+	else
+		return BE_NAME;
+}
+
 /* Number of bytes of an RX frame that are copied to skb->data */
 #define BE_HDR_LEN 		64
 #define BE_MAX_JUMBO_FRAME_SIZE	9018
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 30d0c81c989..5c378b5e8e4 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -28,10 +28,10 @@ static unsigned int rx_frag_size = 2048;
 module_param(rx_frag_size, uint, S_IRUGO);
 MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
 
-#define BE_VENDOR_ID 		0x19a2
-#define BE2_DEVICE_ID_1 	0x0211
 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
-	{ PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -1859,7 +1859,7 @@ static int __devinit be_probe(struct pci_dev *pdev,
 	if (status != 0)
 		goto stats_clean;
 
-	dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+	dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
 	return 0;
 
 stats_clean:
@@ -1873,7 +1873,7 @@ rel_reg:
 disable_dev:
 	pci_disable_device(pdev);
 do_none:
-	dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+	dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev));
 	return status;
 }
 
-- 
cgit v1.2.3


From 511e11e396dc596825ce04d53d7f6d579404bc01 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <dada1@cosmosbay.com>
Date: Mon, 18 May 2009 19:26:37 -0700
Subject: pkt_sched: gen_estimator: use 64 bit intermediate counters for bps

gen_estimator can overflow bps (bytes per second) with Gb links, while
it was designed with a u32 API, with a theorical limit of 34360Mbit
(2^32 bytes)

Using 64 bit intermediate avbps/brate counters can allow us to reach
this theorical limit.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/gen_estimator.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 9cc9f95b109..6d62d4618cf 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -66,9 +66,9 @@
 
    NOTES.
 
-   * The stored value for avbps is scaled by 2^5, so that maximal
-     rate is ~1Gbit, avpps is scaled by 2^10.
-
+   * avbps is scaled by 2^5, avpps is scaled by 2^10.
+   * both values are reported as 32 bit unsigned values. bps can
+     overflow for fast links : max speed being 34360Mbit/sec
    * Minimal interval is HZ/4=250msec (it is the greatest common divisor
      for HZ=100 and HZ=1024 8)), maximal interval
      is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals
@@ -86,9 +86,9 @@ struct gen_estimator
 	spinlock_t		*stats_lock;
 	int			ewma_log;
 	u64			last_bytes;
+	u64			avbps;
 	u32			last_packets;
 	u32			avpps;
-	u32			avbps;
 	struct rcu_head		e_rcu;
 	struct rb_node		node;
 };
@@ -115,6 +115,7 @@ static void est_timer(unsigned long arg)
 	rcu_read_lock();
 	list_for_each_entry_rcu(e, &elist[idx].list, list) {
 		u64 nbytes;
+		u64 brate;
 		u32 npackets;
 		u32 rate;
 
@@ -125,9 +126,9 @@ static void est_timer(unsigned long arg)
 
 		nbytes = e->bstats->bytes;
 		npackets = e->bstats->packets;
-		rate = (nbytes - e->last_bytes)<<(7 - idx);
+		brate = (nbytes - e->last_bytes)<<(7 - idx);
 		e->last_bytes = nbytes;
-		e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log;
+		e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log;
 		e->rate_est->bps = (e->avbps+0xF)>>5;
 
 		rate = (npackets - e->last_packets)<<(12 - idx);
-- 
cgit v1.2.3


From 7ee2cb7f32b299c2b06a31fde155457203e4b7dd Mon Sep 17 00:00:00 2001
From: Frank Filz <ffilzlnx@us.ibm.com>
Date: Mon, 18 May 2009 17:41:40 -0400
Subject: nfs: Fix NFS v4 client handling of MAY_EXEC in nfs_permission.

The problem is that permission checking is skipped if atomic open is
possible, but when exec opens a file, it just opens it O_READONLY which
means EXEC permission will not be checked at that time.

This problem is observed by the following sequence (executed as root):

  mount -t nfs4 server:/ /mnt4
  echo "ls" >/mnt4/foo
  chmod 744 /mnt4/foo
  su guest -c "mnt4/foo"

Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Tested-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/nfs/dir.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 370b190a09d..89f98e9a024 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1943,7 +1943,8 @@ int nfs_permission(struct inode *inode, int mask)
 		case S_IFREG:
 			/* NFSv4 has atomic_open... */
 			if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN)
-					&& (mask & MAY_OPEN))
+					&& (mask & MAY_OPEN)
+					&& !(mask & MAY_EXEC))
 				goto out;
 			break;
 		case S_IFDIR:
-- 
cgit v1.2.3


From 995b337952cdf7e05d288eede580257b632a8343 Mon Sep 17 00:00:00 2001
From: Thomas Chenault <thomas_chenault@dell.com>
Date: Mon, 18 May 2009 21:43:27 -0700
Subject: net: fix skb_seq_read returning wrong offset/length for page frag
 data

When called with a consumed value that is less than skb_headlen(skb)
bytes into a page frag, skb_seq_read() incorrectly returns an
offset/length relative to skb->data. Ensure that data which should come
from a page frag does.

Signed-off-by: Thomas Chenault <thomas_chenault@dell.com>
Tested-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/skbuff.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d152394b261..e505b5392e1 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2288,7 +2288,7 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
 next_skb:
 	block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
 
-	if (abs_offset < block_limit) {
+	if (abs_offset < block_limit && !st->frag_data) {
 		*data = st->cur_skb->data + (abs_offset - st->stepped_offset);
 		return block_limit - abs_offset;
 	}
-- 
cgit v1.2.3


From bc8a5397433e4effbaddfa7e462d10b3c060cabb Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Mon, 18 May 2009 21:48:38 -0700
Subject: ipv4: make default for INET_LRO consistent with help text

Commit e81963b1 ("ipv4: Make INET_LRO a bool instead of tristate.")
changed this config from tristate to bool.  Add default so that it is
consistent with the help text.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 9d26a3da37e..5b919f7b45d 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -408,7 +408,7 @@ config INET_XFRM_MODE_BEET
 
 config INET_LRO
 	bool "Large Receive Offload (ipv4/tcp)"
-
+	default y
 	---help---
 	  Support for Large Receive Offload (ipv4/tcp).
 
-- 
cgit v1.2.3


From 28afea5b2ffaa48f4f43d22ae8edcc384c05df80 Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Tue, 19 May 2009 08:25:48 +0200
Subject: xen/blkfront: allow xenbus state transition to Closing->Closed  when
 not Connected

This situation can occur when attempting to attach a block device whose
backend is an empty physical CD-ROM driver. The backend in this case
will go directly from the Initialising state to Closing->Closed.
Previously this would result in a NULL pointer deref on info->gd
(xenbus_dev_fatal does not return as a1a15ac5 seems to expect)

Cc: stable@kernel.org
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/block/xen-blkfront.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 8f905089b72..6971a12e8b9 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -977,8 +977,10 @@ static void backend_changed(struct xenbus_device *dev,
 		break;
 
 	case XenbusStateClosing:
-		if (info->gd == NULL)
-			xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
+		if (info->gd == NULL) {
+			xenbus_frontend_closed(dev);
+			break;
+		}
 		bd = bdget_disk(info->gd, 0);
 		if (bd == NULL)
 			xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
-- 
cgit v1.2.3


From 31a14400e8f365e5d4d1a0b2a1ef4d5405d6091e Mon Sep 17 00:00:00 2001
From: Ian Campbell <ian.campbell@citrix.com>
Date: Tue, 19 May 2009 08:27:42 +0200
Subject: xen/blkfront: fix warning when deleting gendisk on unplug/shutdown

Currently blkfront gives a warning when hot unplugging due to calling
del_gendisk() with interrupts disabled (due to blkif_io_lock).

WARNING: at kernel/softirq.c:124 local_bh_enable+0x36/0x84()
Modules linked in: xenfs xen_netfront ext3 jbd mbcache xen_blkfront
Pid: 13, comm: xenwatch Not tainted 2.6.29-xs5.5.0.13 #3
Call Trace:
 [<c012611c>] warn_slowpath+0x80/0xb6
 [<c0104cf1>] xen_sched_clock+0x16/0x63
 [<c0104710>] xen_force_evtchn_callback+0xc/0x10
 [<c0104e32>] check_events+0x8/0xe
 [<c0104d9b>] xen_restore_fl_direct_end+0x0/0x1
 [<c0103749>] xen_mc_flush+0x10a/0x13f
 [<c0105bd2>] __switch_to+0x114/0x14e
 [<c011d92b>] dequeue_task+0x62/0x70
 [<c0123b6f>] finish_task_switch+0x2b/0x84
 [<c0299877>] schedule+0x66d/0x6e7
 [<c0104710>] xen_force_evtchn_callback+0xc/0x10
 [<c0104710>] xen_force_evtchn_callback+0xc/0x10
 [<c012a642>] local_bh_enable+0x36/0x84
 [<c022f9a7>] sk_filter+0x57/0x5c
 [<c0233dae>] netlink_broadcast+0x1d5/0x315
 [<c01c6371>] kobject_uevent_env+0x28d/0x331
 [<c01e7ead>] device_del+0x10f/0x120
 [<c01e7ec6>] device_unregister+0x8/0x10
 [<c015f86d>] bdi_unregister+0x2d/0x39
 [<c01bf6f4>] unlink_gendisk+0x23/0x3e
 [<c01ac946>] del_gendisk+0x7b/0xe7
 [<d0828c19>] blkfront_closing+0x28/0x6e [xen_blkfront]
 [<d082900c>] backend_changed+0x3ad/0x41d [xen_blkfront]

We can fix this by calling del_gendisk() later in blkfront_closing, after
releasing blkif_io_lock. Since the queue is stopped during the interrupts
disabled phase I don't think there is any danger of an event occuring between
releasing the blkif_io_lock and deleting the disk.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/block/xen-blkfront.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 6971a12e8b9..a6cbf7b808e 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -934,8 +934,6 @@ static void blkfront_closing(struct xenbus_device *dev)
 
 	spin_lock_irqsave(&blkif_io_lock, flags);
 
-	del_gendisk(info->gd);
-
 	/* No more blkif_request(). */
 	blk_stop_queue(info->rq);
 
@@ -949,6 +947,8 @@ static void blkfront_closing(struct xenbus_device *dev)
 	blk_cleanup_queue(info->rq);
 	info->rq = NULL;
 
+	del_gendisk(info->gd);
+
  out:
 	xenbus_frontend_closed(dev);
 }
-- 
cgit v1.2.3


From 8b6427a2a8f7dd43e9208fb33a3b116d66db4979 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Tue, 19 May 2009 09:57:03 -0400
Subject: cifs: fix pointer initialization and checks in cifs_follow_symlink
 (try #4)

This is the third respin of the patch posted yesterday to fix the error
handling in cifs_follow_symlink. It also includes a fix for a bogus NULL
pointer check in CIFSSMBQueryUnixSymLink that Jeff Moyer spotted.

It's possible for CIFSSMBQueryUnixSymLink to return without setting
target_path to a valid pointer. If that happens then the current value
to which we're initializing this pointer could cause an oops when it's
kfree'd.

This patch is a little more comprehensive than the last patches. It
reorganizes cifs_follow_link a bit for (hopefully) better readability.
It should also eliminate the uneeded allocation of full_path on servers
without unix extensions (assuming they can get to this point anyway, of
which I'm not convinced).

On a side note, I'm not sure I agree with the logic of enabling this
query even when unix extensions are disabled on the client. It seems
like that should disable this as well. But, changing that is outside the
scope of this fix, so I've left it alone for now.

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@inraded.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c |  2 +-
 fs/cifs/link.c    | 52 ++++++++++++++++++++++++++--------------------------
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 5759ba53dc9..d06260251c3 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2475,7 +2475,7 @@ querySymLinkRetry:
 			/* BB FIXME investigate remapping reserved chars here */
 			*symlinkinfo = cifs_strndup_from_ucs(data_start, count,
 						    is_unicode, nls_codepage);
-			if (!symlinkinfo)
+			if (!*symlinkinfo)
 				rc = -ENOMEM;
 		}
 	}
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index ea9d11e3dcb..cd83c53fcbb 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -107,48 +107,48 @@ void *
 cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 {
 	struct inode *inode = direntry->d_inode;
-	int rc = -EACCES;
+	int rc = -ENOMEM;
 	int xid;
 	char *full_path = NULL;
-	char *target_path = ERR_PTR(-ENOMEM);
-	struct cifs_sb_info *cifs_sb;
-	struct cifsTconInfo *pTcon;
+	char *target_path = NULL;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+	struct cifsTconInfo *tcon = cifs_sb->tcon;
 
 	xid = GetXid();
 
-	full_path = build_path_from_dentry(direntry);
+	/*
+	 * For now, we just handle symlinks with unix extensions enabled.
+	 * Eventually we should handle NTFS reparse points, and MacOS
+	 * symlink support. For instance...
+	 *
+	 * rc = CIFSSMBQueryReparseLinkInfo(...)
+	 *
+	 * For now, just return -EACCES when the server doesn't support posix
+	 * extensions. Note that we still allow querying symlinks when posix
+	 * extensions are manually disabled. We could disable these as well
+	 * but there doesn't seem to be any harm in allowing the client to
+	 * read them.
+	 */
+	if (!(tcon->ses->capabilities & CAP_UNIX)) {
+		rc = -EACCES;
+		goto out;
+	}
 
+	full_path = build_path_from_dentry(direntry);
 	if (!full_path)
 		goto out;
 
 	cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
-	cifs_sb = CIFS_SB(inode->i_sb);
-	pTcon = cifs_sb->tcon;
-
-	/* We could change this to:
-		if (pTcon->unix_ext)
-	   but there does not seem any point in refusing to
-	   get symlink info if we can, even if unix extensions
-	   turned off for this mount */
-
-	if (pTcon->ses->capabilities & CAP_UNIX)
-		rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
-					     &target_path,
-					     cifs_sb->local_nls);
-	else {
-		/* BB add read reparse point symlink code here */
-		/* rc = CIFSSMBQueryReparseLinkInfo */
-		/* BB Add code to Query ReparsePoint info */
-		/* BB Add MAC style xsymlink check here if enabled */
-	}
 
+	rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, &target_path,
+				     cifs_sb->local_nls);
+	kfree(full_path);
+out:
 	if (rc != 0) {
 		kfree(target_path);
 		target_path = ERR_PTR(rc);
 	}
 
-	kfree(full_path);
-out:
 	FreeXid(xid);
 	nd_set_link(nd, target_path);
 	return NULL;
-- 
cgit v1.2.3


From 26a9a418237c0b06528941bca693c49c8d97edbe Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 19 May 2009 11:25:35 -0700
Subject: Avoid ICE in get_random_int() with gcc-3.4.5

Martin Knoblauch reports that trying to build 2.6.30-rc6-git3 with
RHEL4.3 userspace (gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2)) causes an
internal compiler error (ICE):

    drivers/char/random.c: In function `get_random_int':
    drivers/char/random.c:1672: error: unrecognizable insn:
    (insn 202 148 150 0 /scratch/build/linux-2.6.30-rc6-git3/arch/x86/include/asm/tsc.h:23 (set (reg:SI 0 ax [91])
            (subreg:SI (plus:DI (plus:DI (reg:DI 0 ax [88])
                        (subreg:DI (reg:SI 6 bp) 0))
                    (const_int -4 [0xfffffffffffffffc])) 0)) -1 (nil)
        (nil))
    drivers/char/random.c:1672: internal compiler error: in extract_insn, at recog.c:2083

and after some debugging it turns out that it's due to the code trying
to figure out the rough value of the current stack pointer by taking an
address of an uninitialized variable and casting that to an integer.

This is clearly a compiler bug, but it's not worth fighting - while the
current stack kernel pointer might be somewhat hard to predict in user
space, it's also not generally going to change for a lot of the call
chains for a particular process.

So just drop it, and mumble some incoherent curses at the compiler.

Tested-by: Martin Knoblauch <spamtrap@knobisoft.de>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/random.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index b2ced39d76b..8c7444857a4 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1673,7 +1673,7 @@ unsigned int get_random_int(void)
 	int ret;
 
 	keyptr = get_keyptr();
-	hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret;
+	hash[0] += current->pid + jiffies + get_cycles();
 
 	ret = half_md4_transform(hash, keyptr->secret);
 	put_cpu_var(get_random_int_hash);
-- 
cgit v1.2.3


From b126d113484886d900179b4ae55ea7fabe15f936 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 30 Apr 2009 14:48:36 +0100
Subject: mfd: Keep a cache of WM8350 volatile values

Due to the way that the WM8350 audio driver handles CODEC_ENA many of
the WM8350 audio registers are marked as volatile when they aren't
actually so. Allow the audio driver to see a cache of these values for
inspection during interrupt context.

To do this we need to stop satisfying any bits from volatile registers
from cache - there's no real benefit from doing so anyway, we did the
read already.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/mfd/wm8350-core.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index c2be3088e2e..fe24079387c 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -79,10 +79,6 @@ static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
 		/* Cache is CPU endian */
 		dest[i - reg] = be16_to_cpu(dest[i - reg]);
 
-		/* Satisfy non-volatile bits from cache */
-		dest[i - reg] &= wm8350_reg_io_map[i].vol;
-		dest[i - reg] |= wm8350->reg_cache[i];
-
 		/* Mask out non-readable bits */
 		dest[i - reg] &= wm8350_reg_io_map[i].readable;
 	}
@@ -182,9 +178,6 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
 			(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
 			| src[i - reg];
 
-		/* Don't store volatile bits */
-		wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol;
-
 		src[i - reg] = cpu_to_be16(src[i - reg]);
 	}
 
@@ -1261,7 +1254,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
 		    (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
 			value = be16_to_cpu(wm8350->reg_cache[i]);
 			value &= wm8350_reg_io_map[i].readable;
-			value &= ~wm8350_reg_io_map[i].vol;
 			wm8350->reg_cache[i] = value;
 		} else
 			wm8350->reg_cache[i] = reg_map[i];
-- 
cgit v1.2.3


From f43ab901005c2bb3c5440e91b6efae9f5db02e7c Mon Sep 17 00:00:00 2001
From: Nelson Castillo <arhuaco@freaks-unidos.net>
Date: Tue, 12 May 2009 13:26:47 -0700
Subject: mfd: pcf50633: fix unsafe disable_irq()

Without this change Openmoko Freerunner (GTA02) bootstrap will deadlock.
As pointed out in other patches this issue is in the wild since the merge
of:

: commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9
: Author: Thomas Gleixner <tglx@linutronix.de>
: Date:   Mon Mar 23 18:28:15 2009 +0100
:
:    genirq: add threaded interrupt handler support
:
:    Add support for threaded interrupt handlers

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <balajirrao@openmoko.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/mfd/pcf50633-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 7793932a513..11a6248cc1c 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -443,7 +443,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
 	dev_dbg(pcf->dev, "pcf50633_irq\n");
 
 	get_device(pcf->dev);
-	disable_irq(pcf->irq);
+	disable_irq_nosync(pcf->irq);
 	schedule_work(&pcf->irq_work);
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From 33252572e727ccdcc54efdb67157e7ab3d6942db Mon Sep 17 00:00:00 2001
From: Nico Schottelius <nico-linux-20090330@schottelius.org>
Date: Sat, 16 May 2009 14:00:56 +0200
Subject: Fix scripts/setlocalversion with tagged git commit

Produce correct output for
- tagged commit (v2.6.30-rc6)
- past tagged commit (v2.6.30-rc5-299-g7c7327d)
- no tag

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/setlocalversion | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 32c8554f394..00790472f64 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -1,5 +1,13 @@
 #!/bin/sh
-# Print additional version information for non-release trees.
+#
+# This scripts adds local version information from the version
+# control systems git, mercurial (hg) and subversion (svn).
+#
+# If something goes wrong, send a mail the kernel build mailinglist
+# (see MAINTAINERS) and CC Nico Schottelius
+# <nico-linuxsetlocalversion -at- schottelius.org>.
+#
+#
 
 usage() {
 	echo "Usage: $0 [srctree]" >&2
@@ -10,12 +18,20 @@ cd "${1:-.}" || usage
 
 # Check for git and a git repo.
 if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
-	# Do we have an untagged tag?
-	if atag=`git describe 2>/dev/null`; then
-		echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
-	# add -g${head}, if there is no usable tag
-	else
-		printf '%s%s' -g $head
+
+	# If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
+	# because this version is defined in the top level Makefile.
+	if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+		# If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
+		# we pretty print it.
+		if atag="`git describe 2>/dev/null`"; then
+			echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+		# If we don't have a tag at all we print -g{commitish}.
+		else
+			printf '%s%s' -g $head
+		fi
 	fi
 
 	# Is this git on svn?
-- 
cgit v1.2.3


From 64d1304a64477629cb16b75491a77bafe6f86963 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 18 May 2009 21:20:10 +0200
Subject: futex: setup writeable mapping for futex ops which modify user space
 data

The futex code installs a read only mapping via get_user_pages_fast()
even if the futex op function has to modify user space data. The
eventual fault was fixed up by futex_handle_fault() which walked the
VMA with mmap_sem held.

After the cleanup patches which removed the mmap_sem dependency of the
futex code commit 4dc5b7a36a49eff97050894cf1b3a9a02523717 (futex:
clean up fault logic) removed the private VMA walk logic from the
futex code. This change results in a stale RO mapping which is not
fixed up.

Instead of reintroducing the previous fault logic we set up the
mapping in get_user_pages_fast() read/write for all operations which
modify user space data. Also handle private futexes in the same way
and make the current unconditional access_ok(VERIFY_WRITE) depend on
the futex op.

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CC: stable@kernel.org
---
 kernel/futex.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/kernel/futex.c b/kernel/futex.c
index eef8cd26b5e..d546b2d53a6 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -193,6 +193,7 @@ static void drop_futex_key_refs(union futex_key *key)
  * @uaddr: virtual address of the futex
  * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
  * @key: address where result is stored.
+ * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
  *
  * Returns a negative error code or 0
  * The key words are stored in *key on success.
@@ -203,7 +204,8 @@ static void drop_futex_key_refs(union futex_key *key)
  *
  * lock_page() might sleep, the caller should not hold a spinlock.
  */
-static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
+static int
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
 {
 	unsigned long address = (unsigned long)uaddr;
 	struct mm_struct *mm = current->mm;
@@ -226,7 +228,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
 	 *        but access_ok() should be faster than find_vma()
 	 */
 	if (!fshared) {
-		if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
+		if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
 			return -EFAULT;
 		key->private.mm = mm;
 		key->private.address = address;
@@ -235,7 +237,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
 	}
 
 again:
-	err = get_user_pages_fast(address, 1, 0, &page);
+	err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
 	if (err < 0)
 		return err;
 
@@ -677,7 +679,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset)
 	if (!bitset)
 		return -EINVAL;
 
-	ret = get_futex_key(uaddr, fshared, &key);
+	ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -723,10 +725,10 @@ futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
 	int ret, op_ret;
 
 retry:
-	ret = get_futex_key(uaddr1, fshared, &key1);
+	ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2);
+	ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -814,10 +816,10 @@ static int futex_requeue(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
 	int ret, drop_count = 0;
 
 retry:
-	ret = get_futex_key(uaddr1, fshared, &key1);
+	ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2);
+	ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -1140,7 +1142,7 @@ static int futex_wait(u32 __user *uaddr, int fshared,
 	q.bitset = bitset;
 retry:
 	q.key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q.key);
+	ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_READ);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -1330,7 +1332,7 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared,
 	q.pi_state = NULL;
 retry:
 	q.key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q.key);
+	ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -1594,7 +1596,7 @@ retry:
 	if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
 		return -EPERM;
 
-	ret = get_futex_key(uaddr, fshared, &key);
+	ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
 	if (unlikely(ret != 0))
 		goto out;
 
-- 
cgit v1.2.3


From fbaa58696cef848de818768783ef185bd3f05158 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 13 May 2009 12:50:40 -0400
Subject: TPM: get_event_name stack corruption

get_event_name uses sprintf to fill a buffer declared on the stack.  It fills
the buffer 2 bytes at a time.  What the code doesn't take into account is that
sprintf(buf, "%02x", data) actually writes 3 bytes.  2 bytes for the data and
then it nul terminates the string.  Since we declare buf to be 40 characters
long and then we write 40 bytes of data into buf sprintf is going to write 41
characters.  The fix is to leave room in buf for the nul terminator.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 drivers/char/tpm/tpm_bios.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index ed306eb1057..0c2f55a38b9 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -212,7 +212,8 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 			unsigned char * event_entry)
 {
 	const char *name = "";
-	char data[40] = "";
+	/* 41 so there is room for 40 data and 1 nul */
+	char data[41] = "";
 	int i, n_len = 0, d_len = 0;
 	struct tcpa_pc_event *pc_event;
 
-- 
cgit v1.2.3


From b674137755bbe2750f997a2a1264db3cdf8abcb3 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 18 May 2009 11:56:16 +1000
Subject: drm: Round size of SHM maps to PAGE_SIZE

Currently, userspace can fail to obtain the SAREA mapping (among other
reasons) if it passes SAREA_MAX to drmAddMap without aligning it to the
page size. This breaks for example on PowerPC with 64K pages and radeon
despite the kernel radeon actually doing the right rouding in the first
place.

The way SAREA_MAX is defined with a bunch of ifdef's and duplicated
between libdrm and the X server is gross, ultimately it should be
retrieved by userspace from the kernel, but in the meantime, we have
plenty of existing userspace built with bad values that need to work.

This patch works around broken userspace by rounding the requested size
in drm_addmap_core() of any SHM map to the page size. Since the backing
memory for SHM maps is also allocated within addmap_core, there is no
danger of adjacent memory being exposed due to the increased map size.
The only side effect is that drivers that previously tried to create or
access SHM maps using a size < PAGE_SIZE and failed (getting -EINVAL),
will now succeed at the cost of a little bit more memory used if that
happens to be when the map is created.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/drm_bufs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 6d80d17f1e9..0411d912d82 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -170,6 +170,14 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	}
 	DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n",
 		  (unsigned long long)map->offset, map->size, map->type);
+
+	/* page-align _DRM_SHM maps. They are allocated here so there is no security
+	 * hole created by that and it works around various broken drivers that use
+	 * a non-aligned quantity to map the SAREA. --BenH
+	 */
+	if (map->type == _DRM_SHM)
+		map->size = PAGE_ALIGN(map->size);
+
 	if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) {
 		drm_free(map, sizeof(*map), DRM_MEM_MAPS);
 		return -EINVAL;
-- 
cgit v1.2.3


From d3375ea7213d09284ee3683d8bc075b9d3786a03 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Wed, 20 May 2009 08:42:06 +0200
Subject: cdrom: beyond ARRAY_SIZE of viocd_diskinfo

Do not go beyond ARRAY_SIZE of viocd_diskinfo

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/cdrom/viocd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 13929356135..9b1624e0dde 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -587,7 +587,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	struct device_node *node = vdev->dev.archdata.of_node;
 
 	deviceno = vdev->unit_address;
-	if (deviceno > VIOCD_MAX_CD)
+	if (deviceno >= VIOCD_MAX_CD)
 		return -ENODEV;
 	if (!node)
 		return -ENODEV;
-- 
cgit v1.2.3


From 950312ce22696ddfa42a957bdadaa9c24151e679 Mon Sep 17 00:00:00 2001
From: Andrew Randrianasulu <randrik_a@yahoo.com>
Date: Thu, 14 May 2009 11:29:27 -0700
Subject: MIPS: IP32: Fix hang on shutdown in power button interrupt handler.

The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip32/ip32-reset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index b6cab089561..667da932b7b 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -145,7 +145,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
 			"%s: RTC IRQ without RTC_IRQF\n", __func__);
 	}
 	/* Wait until interrupt goes away */
-	disable_irq(MACEISA_RTC_IRQ);
+	disable_irq_nosync(MACEISA_RTC_IRQ);
 	init_timer(&debounce_timer);
 	debounce_timer.function = debounce;
 	debounce_timer.expires = jiffies + 50;
-- 
cgit v1.2.3


From 7e9e05cad94217498e4d9bd6ef7137b4e9e7ed64 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sat, 16 May 2009 12:23:45 +0100
Subject: MIPS: IP22: Fix hang in power button interrupt handler

The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip22/ip22-reset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 4ad5c3393fd..45b6694c207 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id)
 
 	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
 		/* Wait until interrupt goes away */
-		disable_irq(SGI_PANEL_IRQ);
+		disable_irq_nosync(SGI_PANEL_IRQ);
 		init_timer(&debounce_timer);
 		debounce_timer.function = debounce;
 		debounce_timer.expires = jiffies + 5;
-- 
cgit v1.2.3


From 195d1a96ae5fdfbedb8dc4b97afee578921fa99e Mon Sep 17 00:00:00 2001
From: peter fuerst <post@pfrst.de>
Date: Sun, 17 May 2009 23:49:45 +0200
Subject: MIPS: IP28: Change to build with -mr10k-cache-barrier=store

Richard Sandiford's new code for inserting the cache-barriers, for GCC
4.3 and above and already incorporated in the current GCC-release, uses
a slightly different option-syntax.

Signed-off-by: peter fuerst <post@pfrst.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 26947ab8526..c4cae9e6b80 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -473,12 +473,12 @@ endif
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
 ifdef CONFIG_SGI_IP28
-  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
-      $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
   endif
 endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
+cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #
-- 
cgit v1.2.3


From a5e696e5d0f1377ff6beb10d2f40edb6a3d1de18 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@snapgear.com>
Date: Wed, 20 May 2009 16:12:32 +1000
Subject: MIPS: 64-bit: Fix system lockup.

The address range size calculation inside local_flush_tlb_kernel_range()
is being truncated by a too small size variable holder on 64-bit systems.
The truncated size can result in an erroneous tlbsize check that means we
sit spinning inside a loop trying to flush a hige number of TLB entries.
This is for all intents and purposes a system hang. Fix by using an
appropriately sized valiable to hold the size.

[Ralf: Greg's original patch submission identified the issue and fixed one
instance in tlb-r4k.c but there there were several more.  For consistency
I also modified tlb-r3k.c even though that file is only used on 32-bit.]

Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/tlb-r3k.c | 6 ++----
 arch/mips/mm/tlb-r4k.c | 6 ++----
 arch/mips/mm/tlb-r8k.c | 3 +--
 3 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index f0cf46adb97..1c0048a6f5c 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	int cpu = smp_processor_id();
 
 	if (cpu_context(cpu, mm) != 0) {
-		unsigned long flags;
-		int size;
+		unsigned long size, flags;
 
 #ifdef DEBUG_TLB
 		printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
@@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 #ifdef DEBUG_TLB
 	printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 9619f66e531..892be426787 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	int cpu = smp_processor_id();
 
 	if (cpu_context(cpu, mm) != 0) {
-		unsigned long flags;
-		int size;
+		unsigned long size, flags;
 
 		ENTER_CRITICAL(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
@@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 	ENTER_CRITICAL(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c
index 4f01a3be215..4ec95cc2df2 100644
--- a/arch/mips/mm/tlb-r8k.c
+++ b/arch/mips/mm/tlb-r8k.c
@@ -111,8 +111,7 @@ out_restore:
 /* Usable for KV1 addresses only! */
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	unsigned long flags;
-	int size;
+	unsigned long size, flags;
 
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	size = (size + 1) >> 1;
-- 
cgit v1.2.3


From 9b6fe313bfce27d4a261257da70196be0ac2bef5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Michel=20D=C3=A4nzer?= <daenzer@vmware.com>
Date: Wed, 20 May 2009 13:32:00 +0200
Subject: drm: Copy back ioctl data to userspace regardless of return code.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fixes a regression from commit 9d5b3ffc42f7820e8ee07705496955e4c2c38dd9
('drm: fixup some of the ioctl function exit paths'): The vblank ioctl
needs to update the userspace parameters when interrupted by a signal,
which was prevented by the return code check. This could cause the X
server to hang in drmWaitVBlank().

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/drm_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index f01def16a66..019b7c57823 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -481,7 +481,7 @@ int drm_ioctl(struct inode *inode, struct file *filp,
 		}
 		retcode = func(dev, kdata, file_priv);
 
-		if ((retcode == 0) && (cmd & IOC_OUT)) {
+		if (cmd & IOC_OUT) {
 			if (copy_to_user((void __user *)arg, kdata,
 					 _IOC_SIZE(cmd)) != 0)
 				retcode = -EFAULT;
-- 
cgit v1.2.3


From 03fbdb15c14e9746c63168e3ff2c64b9c8336d33 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Wed, 20 May 2009 22:39:08 +0100
Subject: [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *

The second argument of the probe method points to the amba_id
structure, so it's better passed with the correct type. None of the
current in-tree drivers uses the pointer, so they have only been
checked for a clean compile.

Change suggested by Russell King.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/input/serio/ambakmi.c | 2 +-
 drivers/mmc/host/mmci.c       | 2 +-
 drivers/rtc/rtc-pl030.c       | 2 +-
 drivers/rtc/rtc-pl031.c       | 2 +-
 drivers/serial/amba-pl010.c   | 2 +-
 drivers/serial/amba-pl011.c   | 2 +-
 drivers/video/amba-clcd.c     | 2 +-
 include/linux/amba/bus.h      | 2 +-
 sound/arm/aaci.c              | 2 +-
 9 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index e29cdc13a19..a28c06d686e 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io)
 	clk_disable(kmi->clk);
 }
 
-static int amba_kmi_probe(struct amba_device *dev, void *id)
+static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct amba_kmi_port *kmi;
 	struct serio *io;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 36875dcfa49..7d4febdab28 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data)
 	mod_timer(&host->timer, jiffies + HZ);
 }
 
-static int __devinit mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct mmc_platform_data *plat = dev->dev.platform_data;
 	struct mmci_host *host;
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index 82615355215..aaf1f75fa29 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -102,7 +102,7 @@ static const struct rtc_class_ops pl030_ops = {
 	.set_alarm	= pl030_set_alarm,
 };
 
-static int pl030_probe(struct amba_device *dev, void *id)
+static int pl030_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct pl030_rtc *rtc;
 	int ret;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 333eec689d2..451fc13784d 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -127,7 +127,7 @@ static int pl031_remove(struct amba_device *adev)
 	return 0;
 }
 
-static int pl031_probe(struct amba_device *adev, void *id)
+static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 {
 	int ret;
 	struct pl031_local *ldata;
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e3a5ad5ef1d..cdc049d4350 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -665,7 +665,7 @@ static struct uart_driver amba_reg = {
 	.cons			= AMBA_CONSOLE,
 };
 
-static int pl010_probe(struct amba_device *dev, void *id)
+static int pl010_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
 	void __iomem *base;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 8b2b9700f3e..88fdac51b6c 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -729,7 +729,7 @@ static struct uart_driver amba_reg = {
 	.cons			= AMBA_CONSOLE,
 };
 
-static int pl011_probe(struct amba_device *dev, void *id)
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
 	void __iomem *base;
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 61050ab1412..d1f80bac54f 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -437,7 +437,7 @@ static int clcdfb_register(struct clcd_fb *fb)
 	return ret;
 }
 
-static int clcdfb_probe(struct amba_device *dev, void *id)
+static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct clcd_board *board = dev->dev.platform_data;
 	struct clcd_fb *fb;
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 51e6e54b2aa..9b93cafa82a 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -28,7 +28,7 @@ struct amba_id {
 
 struct amba_driver {
 	struct device_driver	drv;
-	int			(*probe)(struct amba_device *, void *);
+	int			(*probe)(struct amba_device *, struct amba_id *);
 	int			(*remove)(struct amba_device *);
 	void			(*shutdown)(struct amba_device *);
 	int			(*suspend)(struct amba_device *, pm_message_t);
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 7fbd68fab94..5c48e36038f 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1074,7 +1074,7 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
 	return i;
 }
 
-static int __devinit aaci_probe(struct amba_device *dev, void *id)
+static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct aaci *aaci;
 	int ret, i;
-- 
cgit v1.2.3