summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2013-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A moderately sized pile of fixes, some specifically for merge window introduced regressions although others are for longer standing items and have been queued up for -stable. I'm kind of tired of all the RDS protocol bugs over the years, to be honest, it's way out of proportion to the number of people who actually use it. 1) Fix missing range initialization in netfilter IPSET, from Jozsef Kadlecsik. 2) ieee80211_local->tim_lock needs to use BH disabling, from Johannes Berg. 3) Fix DMA syncing in SFC driver, from Ben Hutchings. 4) Fix regression in BOND device MAC address setting, from Jiri Pirko. 5) Missing usb_free_urb in ISDN Hisax driver, from Marina Makienko. 6) Fix UDP checksumming in bnx2x driver for 57710 and 57711 chips, fix from Dmitry Kravkov. 7) Missing cfgspace_lock initialization in BCMA driver. 8) Validate parameter size for SCTP assoc stats getsockopt(), from Guenter Roeck. 9) Fix SCTP association hangs, from Lee A Roberts. 10) Fix jumbo frame handling in r8169, from Francois Romieu. 11) Fix phy_device memory leak, from Petr Malat. 12) Omit trailing FCS from frames received in BGMAC driver, from Hauke Mehrtens. 13) Missing socket refcount release in L2TP, from Guillaume Nault. 14) sctp_endpoint_init should respect passed in gfp_t, rather than use GFP_KERNEL unconditionally. From Dan Carpenter. 15) Add AISX AX88179 USB driver, from Freddy Xin. 16) Remove MAINTAINERS entries for drivers deleted during the merge window, from Cesar Eduardo Barros. 17) RDS protocol can try to allocate huge amounts of memory, check that the user's request length makes sense, from Cong Wang. 18) SCTP should use the provided KMALLOC_MAX_SIZE instead of it's own, bogus, definition. From Cong Wang. 19) Fix deadlocks in FEC driver by moving TX reclaim into NAPI poll, from Frank Li. Also, fix a build error introduced in the merge window. 20) Fix bogus purging of default routes in ipv6, from Lorenzo Colitti. 21) Don't double count RTT measurements when we leave the TCP receive fast path, from Neal Cardwell." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tcp: fix double-counted receiver RTT when leaving receiver fast path CAIF: fix sparse warning for caif_usb rds: simplify a warning message net: fec: fix build error in no MXC platform net: ipv6: Don't purge default router if accept_ra=2 net: fec: put tx to napi poll function to fix dead lock sctp: use KMALLOC_MAX_SIZE instead of its own MAX_KMALLOC_SIZE rds: limit the size allocated by rds_message_alloc() MAINTAINERS: remove eexpress MAINTAINERS: remove drivers/net/wan/cycx* MAINTAINERS: remove 3c505 caif_dev: fix sparse warnings for caif_flow_cb ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver sctp: use the passed in gfp flags instead GFP_KERNEL ipv[4|6]: correct dropwatch false positive in local_deliver_finish l2tp: Restore socket refcount when sendmsg succeeds net/phy: micrel: Disable asymmetric pause for KSZ9021 bgmac: omit the fcs phy: Fix phy_device_free memory leak bnx2x: Fix KR2 work-around condition ...
2013-03-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mac80211: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26mac80211: fix monitor mode channel reportingFelix Fietkau
When not using channel contexts with only monitor mode interfaces being active, report local->monitor_chandef to userspace. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-26mac80211: fix idle handling in monitor modeFelix Fietkau
When the driver does not want a monitor mode VIF, no channel context is allocated for it. This causes ieee80211_recalc_idle to put the hardware into idle mode if only a monitor mode is active, breaking injection. Fix this by checking local->monitors in addition to active channel contexts. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-26mac80211: Ensure off-channel frames don't get queuedSeth Forshee
Commit 6c17b77b67587b9f9e3070fb89fe98cef3187131 (mac80211: Fix tx queue handling during scans) contains a bug that causes off-channel frames to get queued when they should be handed down to the driver for transmit. Prevent this from happening. Reported-by: Fabio Rossi <rossi.f@inwind.it> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-26mac80211: fix the problem of forwarding from DS to DS in MeshChun-Yeow Yeoh
Unicast frame with unknown forwarding information always trigger the path discovery assuming destination is always located inside the MBSS. This patch allows the forwarding to look for mesh gate if path discovery inside the MBSS has failed. Reported-by: Cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-26mac80211: fix tim_lock lockingJohannes Berg
The ieee80211_beacon_add_tim() function might be called by drivers with BHs enabled, which causes a potential deadlock if TX happens at the same time and attempts to lock the tim_lock as well. Use spin_lock_bh to fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-18mac80211: don't spam mesh probe response messagesThomas Pedersen
If mesh plink debugging is enabled, this gets annoying in a crowded environment, fast. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18mac80211: stringify mesh peering eventsThomas Pedersen
Convert mesh peering events into strings and make the debug output a little easier to read. Also stop printing the llid and plid since these don't change across peering states and are random numbers anyway so they just amount to noise. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18mac80211: clean up mesh HT operationThomas Pedersen
ieee80211_ht_cap_ie_to_sta_ht_cap() will clean up the ht_supported flag and station bandwidth field for us if the peer beacon doesn't have an HT capability element (is operating as non-HT). Also, we don't really need a special station ch_width member to track the station operating mode any more so use sta.bandwidth instead. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18mac80211: fix harmless station flush warningJohannes Berg
If an interface is set down while authenticating or associating, there's a station entry that will be removed by the flushing in do_stop() and that will cause a warning. It's otherwise harmless, but avoid the warning by calling ieee80211_mgd_stop() first. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: Fix incorrect use of STA_PR_FMT in trace pointsSeth Forshee
Several tracepoints are using STA_PR_FMT where STA_PR_ARG should be used, resulting in messages like "phy0 sta:ARG TYPE NOT FIELD BUT 1". Change these to STA_PR_ARG. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: enable vif.cab_queue for meshBob Copeland
Since mesh powersaving was added, pending bcast/mcast frames may go out the CAB queue now. Unfortunately, the queue was only set up for AP mode, so we would try to tx on the IEEE80211_INVAL_HW_QUEUE. Allow cab_queue for mesh interfaces as well. Fixes the following warning (or crash without MAC80211_VERBOSE_DEBUG): WARNING: at net/mac80211/tx.c:1223 __ieee80211_tx+0x162/0x35f [mac80211]() Modules linked in: mac80211_hwsim mac80211 cfg80211 [...] Pid: 3085, comm: avahi-daemon Tainted: G W 3.8.0-rc1+ #377 Call Trace: [<ffffffff81045c20>] warn_slowpath_common+0x83/0x9c [<ffffffff81045c53>] warn_slowpath_null+0x1a/0x1c [<ffffffffa083aef0>] __ieee80211_tx+0x162/0x35f [mac80211] [<ffffffffa083cb1d>] ieee80211_tx+0xd3/0xf9 [mac80211] [<ffffffffa083cc0f>] ieee80211_xmit+0xcc/0xd5 [mac80211] [<ffffffffa083db59>] ieee80211_subif_start_xmit+0xc53/0xcd8 [mac80211] [<ffffffff81319acd>] dev_hard_start_xmit+0x259/0x3ce [<ffffffff81333d6b>] sch_direct_xmit+0x74/0x17d [<ffffffff8131a0b1>] dev_queue_xmit+0x230/0x414 [<ffffffff8134877a>] ip_finish_output2+0x348/0x3aa [<ffffffff81349029>] ip_finish_output+0x6c/0x71 [<ffffffff81349046>] NF_HOOK_COND.constprop.44+0x18/0x58 [<ffffffff8134a03a>] ip_mc_output+0x134/0x13c [<ffffffff8134835a>] dst_output+0x18/0x1c [<ffffffff81349a24>] ip_local_out+0x20/0x24 [<ffffffff8134a8cf>] ip_send_skb+0x16/0x3c [<ffffffff8136bfba>] udp_send_skb+0x254/0x2b9 [<ffffffff8136c85e>] udp_sendmsg+0x5a8/0x7d4 Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: clean up mesh codeJohannes Berg
There's various code with strange indentation, questionable loop and locking constructs, etc. The bigger change is moving the "sdata" argument to the first argument of all functions, like all other mac80211 functions that have one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: prevent spurious HT/VHT downgrade messageJohannes Berg
Even when connecting to an AP that doesn't support VHT, and even when the local device doesn't support it either, the downgrade message gets printed. Suppress the message if HT and/or VHT is disabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15nl80211: renumber NL80211_FEATURE_FULL_AP_CLIENT_STATEJohannes Berg
Adding the flag to mac80211 already without testing was clearly a mistake, one that we now pay for by having to reserve bit 13 forever. The problem is cfg80211 doesn't allow capability/rate changes for station entries that were added unassociated, so the station entries cannot be set up properly when marked associated. Change the NL80211_FEATURE_FULL_AP_CLIENT_STATE value to make it clear to userspace implementations that all current kernels don't actually support it, even though the previous bit is set, and of course also remove the flag from mac80211 until we test and fix the issues. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15cfg80211: Pass TDLS peer's QoS/HT/VHT information during set_stationJouni Malinen
The information of the peer's capabilities is required for the driver to perform TDLS Peer UAPSD operations. This information of the peer is passed by the supplicant using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass this information of the peer to the driver in case this command is used with the TDLS peer STA. In addition, make the HT/VHT capability configuration handled more consistently for other STA cases (reject both instead of just HT). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: advertise operating mode notification capabilityJohannes Berg
Use the new extended capabilities advertising to advertise the fact that operating mode notification is supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: stop modifying HT SMPS capabilityJohannes Berg
Instead of modifying the HT SMPS capability field for stations, track the SMPS mode explicitly in a new field in the station struct and use it in the drivers that care about it. This simplifies the code using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: generate mesh probe responsesThomas Pedersen
Mesh interfaces will now respond to any broadcast (or matching directed mesh) probe requests with a probe response. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: cache mesh beaconThomas Pedersen
Previously, the entire mesh beacon would be generated each time the beacon timer fired. Instead generate a beacon head and tail (so the TIM can easily be inserted when mesh power save is on) when starting a mesh or the MBSS parameters change. Also add a mutex for protecting beacon updates and preventing leaks. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: constify IE parsingJohannes Berg
Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: properly track HT/VHT operation changesJohannes Berg
A while ago, I made the mac80211 station code never change the channel type after association. This solved a number of issues but is ultimately wrong, we should react if the AP changes the HT operation IE and switches bandwidth. One of the issues is that we associate as HT40 capable, but if the AP ever switches to 40 MHz we won't be able to receive such frames because we never set our channel to 40 MHz. This addresses this and VHT operation changes. If there's a change that is incompatible with our setup, e.g. if the AP decides to change the channel entirely (and for some reason we still hear the beacon) we'll just disconnect. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: move ieee80211_determine_chantype functionJohannes Berg
The next patch will need it further up in the file, so move it unchanged now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: add ieee80211_vif_change_bandwidthJohannes Berg
For HT and VHT the current bandwidth can change, add the function ieee80211_vif_change_bandwidth() to take care of this. It returns a failure if the new bandwidth isn't compatible with the existing channel context, the caller has to handle that. When it happens, also inform the driver that the bandwidth changed for this virtual interface (no drivers would actually care today though.) Changing to/from HT/VHT isn't allowed though. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: clean up channel use in ieee80211_config_ht_txJohannes Berg
The channel use is confusing, some uses the channel context and some the bss_conf.chandef. The latter is fine, so get rid of the channel context part. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: disable HT/VHT if AP has no HT/VHT capabilityJohannes Berg
Having HT/VHT operation IEs but not capability IEs leads to a strange situation where we configure the channel to an HT or VHT bandwidth and then can't actually use it. Prevent this by checking that the HT and VHT capability IEs are present as well as the operation IEs; if not, disable HT and/or VHT. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: handle operating mode notif in beacon/assoc responseJohannes Berg
In beacons and association response frames an AP may include an operating mode notification element to advertise changes in the number of spatial streams it can receive. Handle this using the existing function that handles the action frame, but only handle NSS changes, not bandwidth changes which aren't allowed here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix ieee80211_change_chandef nameJohannes Berg
This should be called ieee80211_change_chanctx() since it changes the channel context, not a chandef. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix HT/VHT disable flagsJohannes Berg
The code to disable HT and VHT if VHT was advertised without VHT is wrong -- it accidentally uses the wrong flags. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: init HT TX data before rate controlJohannes Berg
In case of connection, the station data is initialised from the beacon/probe response first and then updated from the association response. If the latter is different we update the rate control algorithm and driver. Instead of doing it this way, set the station data properly with data from the association response before initializing rate control. Also simplify the code by passing the station pointer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: handle VHT operating mode notificationJohannes Berg
Handle the operating mode notification action frame. When the supported streams or the bandwidth change let the driver and rate control algorithm know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: track number of spatial streamsJohannes Berg
With VHT, a station can change the number of spatial streams it can receive on the fly, not unlike spatial multiplexing in HT. Prepare for that by tracking the maximum number of spatial streams it can receive when the connection is established. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40Johannes Berg
For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: pass station to ieee80211_vht_cap_ie_to_sta_vht_capJohannes Berg
Like with HT, make things a bit simpler in future patches by passing the station to ieee80211_vht_cap_ie_to_sta_vht_cap() instead of the vht_cap pointer. Also disable VHT here if HT isn't supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15Merge remote-tracking branch 'mac80211/master' into HEADJohannes Berg
2013-02-15mac80211: use spin_lock_bh() for TKIP lockJohannes Berg
Since no driver calls the TKIP functions from interrupt context, there's no need to use spin_lock_irqsave(). Just use spin_lock_bh() (and spin_lock() in the TX path where we're in a BH or they're already disabled.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: use spin_lock_bh() for tim_lockJohannes Berg
There's no need to use _irqsave() as the lock is never used in interrupt context. This also fixes a problem in the iwlwifi MVM driver that calls spin_unlock_bh() within its set_tim() callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: don't pick up WPA vendor IEJohannes Berg
There's no use for it, WPA is entirely handled in wpa_supplicant in userspace, so don't pick the IE. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: always unblock CSA queue stop when disconnectingJohannes Berg
In some cases when disconnecting after (or during?) CSA the queues might not recover, and then the only way to recover is reloading the module. Fix this by always unblocking the queue CSA reason when disconnecting. Cc: stable@vger.kernel.org Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: don't call bss_info_changed on p2p-device/monitorJohannes Berg
Since the idle decision rework, mac80211 started calling bss_info_changed() for the driver's monitor interface, which causes a crash for iwlwifi, but drivers generally don't expect this to happen. Therefore, avoid it. While at it, also prevent calling it in such cases and only print a warning. For the P2P Device interface the idle will no longer be called (no channel context), so also prevent that and warn on it. Reported-by: Chaitanya <chaitanya.mgit@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix auth/assoc timeout handlingJohannes Berg
In my commit 1672c0e31917f49d31d30d79067103432bc20cc7 ("mac80211: start auth/assoc timeout on frame status") I broke auth/assoc timeout handling: in case we wait for the TX status, it now leaves the timeout field set to 0, which is a valid time and can compare as being before now ("jiffies"). Thus, if the work struct runs for some other reason, the auth/assoc is treated as having timed out. Fix this by introducing a separate "timeout_started" variable that tracks whether the timeout has started and is checked before timing out. Additionally, for proper TX status handling the change requires that the skb->dev pointer is set up for all the frames, so set it up for all frames in mac80211. Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix ieee80211_sta_tx_notify for nullfuncWojciech Dubowik
Function ieee80211_sta_reset_conn_monitor has been resetting probe_send_count too early and nullfunc check was never called after succesfull ack. Reported-by: Magnus Cederlöf <mcider@gmail.com> Tested-by: Magnus Cederlöf <mcider@gmail.com> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: consolidate MBSS change notificationThomas Pedersen
A few mesh utility functions will call ieee80211_bss_info_change_notify(), and then the caller might notify the driver of the same change again. Avoid this redundancy by propagating the BSS changes and generally calling bss_info_change_notify() once per change. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: fix WPA with VLAN on AP side with ps-staMichael Braun
When sending a broadcast while at least on of the connected stations is sleeping, it gets queued and send after a DTIM beacon is sent. If the packet was to be sent on a vlan interface, the vif used for dequeing from the per-bss queue does not hold the per-vlan sdata. The correct sdata is required to use the correct per-vlan broadcast/multicast key. This patch fixes this by restoring the per-vlan sdata using the skb->dev entry. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: free ps->bc_buf skbs on vlan device stopMichael Braun
When the vlan device is removed, ps->bc_buf processing can no longer send its frames. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: add radar detection command/eventSimon Wunderlich
Add command to trigger radar detection in the driver/FW. Once radar detection is started it should continuously monitor for radars as long as the channel active. If radar is detected usermode notified with 'radar detected' event. Scanning and remain on channel functionality must be disabled while doing radar detection/scanning, and vice versa. Based on original patch by Victor Goldenshtein <victorg@ti.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-29 08:22:51 +0000