summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2007-05-08[SCSI] qla2xxx: Correct pci_set_msi() usage semantics.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Attempt to stop firmware only if it had been previously ↵Andrew Vasquez
executed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.Andrew Vasquez
Hardcoding the qlport_down_retry module-parameter effectively disallowed any user-defined NVRAM setting to go into effect. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA ↵Andrew Vasquez
initialization. Remove a stale check against ha->device_flags (DFLG_NO_CABLE) as topology scanning is performed within the DPC-thread context. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] mesh: cleanup variable usage in interrupt handlerOlaf Hering
_ convert void* to struct mesh_state* - remove unused irq argument from mesh_interrupt() Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] megaraid: replace yield() with cond_resched()Amol Lad
For this driver cond_resched() seems to be a better alternative Signed-off-by: Amol Lad <amol@verismonetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08[SCSI] megaraid: fix warnings when CONFIG_PROC_FS=nwalter harms
drivers/scsi/megaraid.c: In function 'megaraid_probe_one': drivers/scsi/megaraid.c:4893: warning: implicit declaration of function 'mega_create_proc_entry' drivers/scsi/megaraid.c: In function 'megaraid_remove_one': drivers/scsi/megaraid.c:4968: warning: unused variable 'buf' Fix by adding #defines Signed-off-by: walter harms <wharms@bfs.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08Merge branch 'linux-2.6'Paul Mackerras
2007-05-07[SCSI] esp_scsi: Fix section mismatch warnings.Martin Habets
Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-06[SCSI] SUNESP: sun_esp.c needs linux/delay.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits) kconfig: fix mconf segmentation fault kbuild: enable use of code from a different dir kconfig: error out if recursive dependencies are found kbuild: scripts/basic/fixdep segfault on pathological string-o-death kconfig: correct minor typo in Kconfig warning message. kconfig: fix path to modules.txt in Kconfig help usr/Kconfig: fix typo kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs' kbuild: be more explicit on missing .config file kbuild: clarify the creation of the LOCALVERSION_AUTO string. kbuild: propagate errors from find in scripts/gen_initramfs_list.sh kconfig: refer to qt3 if we cannot find qt libraries kbuild: handle compressed cpio initramfs-es kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text kbuild: remove stale comment in modpost.c kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE kbuild: fix make mrproper for Documentation/DocBook/man kbuild: remove kconfig binaries during make mrproper kconfig/menuconfig: do not hardcode '.config' kbuild: override build timestamp & version ...
2007-05-06[SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllersSalyzyn, Mark
The kexec patch introduced a superfluous (and otherwise inert) reset of some adapters. The register can have a hardware default value that has zeros for the undefined interrupts. This patch refines the test of the interrupt enable register to focus on only the interrupts that affect the driver in order to detect if an incomplete shutdown of the Adapter had occurred (kdump). Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] aacraid: kexec fix (reset interrupt handler)Salyzyn, Mark
Another layer on this onion also discovered by Duane, the interrupt enable handler also needed to be set ... The interrupt enable was called from within the synchronous command handler. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] tmscsim: Remove the last bus_to_virt()Guennadi Liakhovetski
Dynamically map the buffer for PIO for the residue byte. Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] tmscsim: remove bogus endianness conversionsGuennadi Liakhovetski
cpu_to_le32 endianness conversions in tmscsim.c, followed by arithmetic operations don't look correct. Besides, {in,out}[wl] already perform the necessary conversions. Further, bus addresses of request buffers are guaranteed to be (mapped) under 4G by current scsi- and block-layer defaults. This could be explicitly enforced by using blk_queue_bounce_limit(), which, however, doesn't seem to be the common practice among SCSI drivers. Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] tmscsim: remove long dead DMA_INTGuennadi Liakhovetski
DMA_INT code is disabled since 1998, remove it to prepare for further cleanup. Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Better handle adapter boot time errorsBrian King
If an ipr adapter encounters an adapter error requiring an adapter reset to recover from prior to driver load time, the error will be ignored and recovery will not happen until the initial timeout occurs waiting for the firmware to come ready, which means a five minute timeout. Fix is to read the interrupt register before clearing any of the interrupts at probe time. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] fc_transport: make all rports wait dev_loss_tmo before removing themJames Smart
Per the comment in the change - it's not always prudent to immediately remove the rport upon first notice of a disconnect. Make all rports wait dev_loss_tmo before being deleted (and each could have a separate dev_loss_tmo value). The original post was: http://marc.info/?l=linux-scsi&m=117392196006703&w=2 The repost contains the following changes: - Bug fix in fc_starget_delete(). Dev_loss_tmo_callbk() was called prior to tearing down the target. The callback is to be the last thing called, as it tells the LLDD that the rport is completely finished and can be torn down. Rework so that terminate_rport_io() is called to terminate the outstanding io. Isolated work so it's is simply "starget" work. - Fix holes in original patch. There were code paths that did not expect the dev_loss_tmo timer to be running for the non-fcp rports. - Bug Fix: the transport wasn't protecting against a LLDD calling fc_remote_port_delete() back-to-back. Thus, the dev_loss_tmo timer could be restarted such that it fires after the rport had been deleted. Validate rport state before starting the timer. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Enable multi-initator RAID supportBrian King
Enables multi-initiator support on ipr RAID adapters that support it. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Improved dual adapter errorsBrian King
Formats ipr dual adapter errors so that they are more compact. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Increase adapter operational timeoutBrian King
Increases the adapter operational timeout for some adapters that support dual controller configurations, since they may take longer to come ready. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Handle IOA reset requestBrian King
In ipr dual adapter configurations, the ipr adapter firmware may require an adapter reset for various reasons. The reset is requested by the adapter firmware logging an error with an IOASC of 0x02048000. Add support to log this error, and reset the adapter. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Handle check condition status from disk array deviceBrian King
On newer levels of microcode for ipr RAID adapters supporting multi-initiator configurations, the disk array, or VSET, resources are capable of generating a check condition. This patch prevents ipr from generating sense data in this scenario and retrieving it from the logical device instead. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Handle UA on disk array following an adapter resetBrian King
On certain ipr RAID adapters, which are capable of multi-initiator configurations, the disk array, or VSET, resources will be in a POR Unit Attention state following an adapter reset. In order for the midlayer to handle the UA, I must report a bus reset to the logical disk array bus at the end of an adapter reset. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Allow driver_data to be passed for dynamic idsBrian King
Since driver_data for pci ids in the ipr driver is now just flags, we can allow these to be passed in from userspace for dynamic ids. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ipr: Prevent overlapped adapter resetsBrian King
This patch fixes some scenarios where an ipr adapter could get reset overlapped, which could cause very long timeouts to occur, or PCI bus errors. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] sas_scsi_host: Convert to use the kthread APIChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] qla4xxx: possible cleanupsAdrian Bunk
- make needlessly global code static - #if 0 unused functions Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Change version number to 8.1.12James Smart
Change version number to 8.1.12 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Update copyright year to 2007James Smart
Update copyright year to 2007 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Added support for 8G speed and new HBAsJames Smart
Added support for 8G speed and new HBAs. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Add support for async scanningJames Smart
Add support for async scanning Notes: This is the async scan patch to our driver from Matthew Wilcox. The async scan logic is still subject to errors in insmod/rmmod, as the async scan threads don't get shutdown when the module unloads underneath them. See http://marc.info/?l=linux-scsi&m=117551999925582&w=2 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Don't process ERATT interrupts when issuing KILL_BOARD ↵James Smart
mbx command Don't process ERATT interrupts when issuing KILL_BOARD mbx command Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Collapse discovery lists to a single node listJames Smart
Collapse discovery lists to a single node list. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Reference count node structures for node lifetime ↵James Smart
management Reference count node structures for node lifetime management. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Improve handling of failed ELS abortsJames Smart
Improve handling of failed ELS aborts. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Improve diagnostic messages and change local loopback ↵James Smart
message to KERN_INFO Improve diagnostic messages and change local loopback message to KERN_INFO Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Fixed recovery of rport after race with dev_loss_tmoJames Smart
Fixed recovery of rport after race with dev_loss_tmo Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Round 2 of Miscellaneous fixesJames Smart
Round 2 of Miscellaneous fixes: - Ensure we don't prematurely re-enable IRQs in lpfc_sli_abort_fcp_cmpl(). - Prevent freeing of iocb after IOCB_TIMEDOUT error. - Added code to cleanup REG_LOGIN mailbox command when a LOGO is received. - Fix offline window where more work can sneak in after clearing work_ha - Use target reset instead of LU reset in bus_device_reset_handler - Fixed system hangs due to leaked host_lock. - Fixed NULL pointer dereference during I/O with LIP. - Fixed false iocb timeout. - Fixed name server query response handling. - Change rport dev_loss_tmo value when user change lpfc HBA's dev_loss_tmo. - Fixed a memory leak in lpfc_sli_wake_mbox_wait. - Fixed check for dropped frames. - Removed hba queue depth calculation based on device PCI IDs - Change min cr_count value specified in comment to agree with setting Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Reorganize lpfc_nlp_list() and callers to prepare for ↵James Smart
nodelist simplification Reorganize lpfc_nlp_list() and callers to prepare for nodelist simplification. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Fix unlock inside list traversalJames Smart
Fix unlock inside list traversal. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Rework offline path to solve HBA reset issuesJames Smart
Rework offline path to solve HBA reset issues Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Modify ELS abort handling to prevent double completionJames Smart
Modify ELS abort handling to prevent double completion Rework portions of ELS abort handling to prevent double completion - Rework ELS iotags and correct abort routine - Move the (badly wrong) ELS completion logic from the initial ELS abort request function to the ELS completion function. - Fixup the iocb completion handling to account for the ELS abort completions. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Misc bug fixes and code cleanupJames Smart
Misc bug fixes and code cleanup: - Fix system hang while running on systems with IOMMU - Fix use after free issues with rports - Don't free mailbox structure if it's still on the mboxq list - Decrement txq_cnt rather than txcmplq_cnt when parsing the txq list - Use msleep for long delays to prevent soft lockup bug check - Don't remove node during dev_loss_tmo if discovery is active - Fix memory leaks in get/reset statistics and link attention paths - Fixed lpfc_ns_rsp to handle entire GID_FT response. - mbox interface should use MAILBOX_CMD_SIZE rather than sizeof(MAILBOX_t) - Fixed bug check in add_timer. - Fixup messages 0116, 0117, and 0128 to report ELS I/O tag. - Remove unused parameter to lpfc_cleanup. - Change mailbox timeout handling. - Remove unused buflist. Code cleanup. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] use sysfs configured timeout for EH Start Unit timeoutBrian King
Use the sysfs configurable timeout when issuing a START_UNIT command from the scsi error handler. This is needed for devices which take longer than thirty seconds to respond to the start unit. The problem was observed when sending a start unit to a disk array device in an ipr RAID adapter, which results in the adapter firmware sending potentially multiple commands to physical devices as a result of this command, which ended up timing out sometimes. This patch does not change the default value used for this command. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] megaraid: update version reported by MEGAIOC_QDRVRVERDavid Milburn
Update the driver version reported by MEGAIOC_QDRVRVER to match LSI_COMMON_MOD_VERSION. Signed-off-by: David Milburn <dmilburn@redhat.com> Acked-by: "Patro, Sumant" <Sumant.Patro@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] qla1280: use DMA_64BIT_MASK instead of ~ 0ULLMatthias Kaehlcke
QLA1280: call pci_set_dma_mask with DMA_64BIT_MASK instead of ~ 0ULL Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] aacraid: kmalloc/memset->kzallocSalyzyn, Mark
Inspired somewhat by Vignesh Babu <vignesh.babu@wipro.com> patch to dpt_i2o.c to replace kmalloc/memset sequences with kzalloc, doing the same for the aacraid driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] dpt_i2o: kmalloc/memset->kzallocvignesh.babu@wipro.com
Replacing kmalloc/memset combination with kzalloc. Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] ch: kmalloc/memset->kzallocvignesh.babu@wipro.com
Replacing kmalloc/memset combination with kzalloc. Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-25 10:29:23 +0000