summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2012-11-12ARM: boot: Fix usage of kechoFabio Estevam
Since commit edc88ceb0 (ARM: be really quiet when building with 'make -s') the following output is generated when building a kernel for ARM: echo ' Kernel: arch/arm/boot/Image is ready' Kernel: arch/arm/boot/Image is ready Building modules, stage 2. echo ' Kernel: arch/arm/boot/zImage is ready' Kernel: arch/arm/boot/zImage is ready As per Documentation/kbuild/makefiles.txt the correct way of using kecho is '@$(kecho)'. Make this change so no more unwanted 'echo' messages are displayed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-30ARM: dt: tegra: fix length of pad control and mux registersPritesh Raithatha
The reg property contains <base length> not <base last_offset>. Fix the length values to be length not last_offset. Cc: stable@vger.kernel.org Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-28Merge tag 'fixes-for-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ...
2012-10-26Merge branch 'v3.7-samsung-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: One is spi stuff for fix the device names for the different subtypes of the spi controller. And the other is adding missing .smp field for exynos4-dt and fixing memory sections for exynos4210-trats board. * 'v3.7-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dt ARM: dts: Split memory into 4 sections for exynos4210-trats ARM: SAMSUNG: Add naming of s3c64xx-spi devices Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A random collection of various fixes, mainly from Arnd and a few other people. Not thing really stands out here." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: drop experimental status for hotplug and Thumb2 ARM: 7560/1: SMP_TWD: use DIV_ROUND_CLOSEST() for periodic mode ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_count ARM: 7556/1: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD ARM: 7555/1: kexec: fix segment memory addresses check ARM: warnings in arch/arm/include/asm/uaccess.h ARM: binfmt_flat: unused variable 'persistent' ARM: be really quiet when building with 'make -s' ARM: pass -marm to gcc by default for both C and assembler ARM: Xen: fix initial build problems ARM: export default read_current_timer ARM: Fix another build warning in arch/arm/mm/alignment.c ARM: export set_irq_flags ARM: kprobes: make more tests conditional
2012-10-25Merge tag 'omap-for-v3.7-rc2/fixes-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren <tony@atomide.com>: Timer fix for am33xx, runtime PM fix for UART, audio McBSP fixes, mux and pinctrl fixes, and Beagle OPP fix. * tag 'omap-for-v3.7-rc2/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ARM: OMAP3: Beagle: fix OPP customization and initcall ordering ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. ARM: OMAP2+: Fix location of select PINCTRL ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio ARM: OMAP2: UART: fix console UART mismatched runtime PM status ARM: OMAP3: PM: apply part of the erratum i582 workaround Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25Merge branch 'for-rcs-3.7' of ↵Arnd Bergmann
git://git.linaro.org/people/ljones/linux-3.0-ux500 into fixes * 'for-rcs-3.7' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann
From Nicolas Ferre <nicolas.ferre@atmel.com>: A mix of typos and critical fixes. The most important ones are a duplicated definition of a Kconfig variable and the handling of external interrupts for non-DT case. The new at91sam9g10 was suffering a recognition issue due to an ID mis-interpreted: this was leading to a kernel panic. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: (257 commits) ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25ARM: dts: mxs: add the "clock-names" for gpmi-nandHuang Shijie
The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand. So the gpmi-nand driver could not find the proper clock. This patch fixes this issue. Signed-off-by: Huang Shijie <b32955@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25ARM: ux500: Correct SDI5 address and add some format changesLee Jones
Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-25ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DTLee Jones
Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-10-24ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.Marek Belisko
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-22Merge tag 'fixes-for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes
2012-10-22ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audioPeter Ujfalusi
Fixes the following errors: [ 2.318084] omap-mcbsp 49022000.mcbsp: invalid rx DMA channel [ 2.324432] omap-mcbsp 49024000.mcbsp: invalid rx DMA channel Which is because we failed to link the sidetone hwmod for McBSP2/3. The missing sidetone hwmod link will prevent omap_device_alloc() to append the DMA resources since we - accidentally - end up having the same number of resources provided from DT (IO/IRQ) as we have in hwmod for the McBSP ports without the ST resources. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-19Merge tag 'kirkwood_fixes_for_v3.7' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: - improve #ifdef logic to prevent linker errors with CACHE_FEROCEON_L2 - lsxl board dts fixes * tag 'kirkwood_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
2012-10-18ARM: kirkwood: fix buttons on lsxl boardsMichael Walle
Change event type to switch for the power and autopower switches. Additionally, this patch aligns the keycodes with the other linkstation boards already supported by linux. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-18ARM: kirkwood: fix LEDs names for lsxl boardsMichael Walle
Don't use the specific board name in a the common device tree include file. Instead use the common name 'lsxl'. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17Merge tag 'mvebu_dove_late_fixes_for_v3.7' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: Misc. fixes for latest changes to mach-dove/ Fixes build breakage for mach-dove * tag 'mvebu_dove_late_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux: ARM: dove: Add crypto engine to DT ARM: dove: Remove watchdog from DT ARM: dove: Restructure SoC device tree descriptor ARM: dove: Fix clock names of sata and gbe ARM: dove: Fix tauros2 device tree init ARM: dove: Add pcie clock support
2012-10-17ARM: dove: Add crypto engine to DTSebastian Hesselbarth
Make use of DT support for the crypto engine on dove and remove the obsolete init call. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Remove watchdog from DTSebastian Hesselbarth
The watchdog on dove requires an interrupt that is not yet available on DT. Therefore, the watchdog DT node is removed until the corresponding chained intc is available. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Restructure SoC device tree descriptorSebastian Hesselbarth
This patch adds proper ranges for all mapped addresses within dove SoC and moves the interrupt controller node inside the simple-bus node. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dove: Fix tauros2 device tree initSebastian Hesselbarth
During the review process of dove DT patches, Tauros2 cache init call was changed and DT support added. This patch fixes the call to Tauros2 init and adds a DT node. Moreover, plat/irq.h include was missing from mach-dove/common.c. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17ARM: dts: Split memory into 4 sections for exynos4210-tratsTomasz Figa
Since the maximum section size on mach-exynos is set to 256MiB, boards with memory configuration defined using sections bigger than 256MiB will fail to boot with a kernel panic. This patch modifies the dts file of Samsung Trats board to define four sections of 256MiB instead of two of 512MiB to fix the boot problem. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-16ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'Shawn Guo
Commit 9e3c0066 (ARM: dts: imx6q-arm2: add pinctrl for uart and enet) defines NANDF_CS pins as gpio in 'hog', assuming these two pins are always used by usdhc3 in gpio mode as card-detection and write-protection on ARM2 board. But it's not true. These pins are shared by usdhc3 and gpmi-nand. We should have the pins functional for gpmi-nand when usdhc3 is disabled. Move the pins out of 'hog', so that pins only work in gpio mode as CD and WP when usdhc3 is enabled, and otherwise they are available for gpmi-nand. Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-15dtb: fix interrupt assignment for ehci/uhci on wm8505Tony Prisk
EHCI and UHCI devices in wm8505.dtsi should use IRQ 1 & 0 respectively - not 43 as used on newer models. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-15ARM: dts: compile Integrator device treesLinus Walleij
This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-12Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull second set of ARM updates from Russell King: "This is the second set of ARM updates for this merge window. Contained within are changes to allow the kernel to boot in hypervisor mode on CPUs supporting virtualization, and cache flushing support to the point of inner sharable unification, which are used by the suspend/resume code to avoid having to do a full cache flush. Also included is one fix for VFP code identified by Michael Olbrich." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels ARM: 7549/1: HYP: fix boot on some ARM1136 cores ARM: 7542/1: mm: fix cache LoUIS API for xscale and feroceon ARM: mm: update __v7_setup() to the new LoUIS cache maintenance API ARM: kernel: update __cpu_disable to use cache LoUIS maintenance API ARM: kernel: update cpu_suspend code to use cache LoUIS operations ARM: mm: rename jump labels in v7_flush_dcache_all function ARM: mm: implement LoUIS API for cache maintenance ops ARM: virt: arch_timers: enable access to physical timers ARM: virt: Add CONFIG_ARM_VIRT_EXT option ARM: virt: Add boot-time diagnostics ARM: virt: Update documentation for hyp mode entry support ARM: zImage/virt: hyp mode entry support for the zImage loader ARM: virt: allow the kernel to be entered in HYP mode ARM: opcodes: add __ERET/__MSR_ELR_HYP instruction encoding
2012-10-11Merge branch 'fixes' into for-linusRussell King
Conflicts: arch/arm/kernel/smp.c
2012-10-11Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ...
2012-10-11Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
2012-10-10Merge tag 'mmc-merge-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)" * tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits) mmc: core: Fixup broken suspend and eMMC4.5 power off notify mmc: sdhci-spear: Add clk_{un}prepare() support mmc: sdhci-spear: add device tree bindings mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks mmc: dt: Support "broken-cd" property in sdhci-pltfm mmc: sdhci-s3c: fix the wrong number of max bus clocks mmc: sh-mmcif: avoid oops on spurious interrupts mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ mmc: sdhci-s3c: Fix crash on module insertion for second time mmc: sdhci-s3c: Enable only required bus clock mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration" mmc: mxcmmc: fix bug that may block a data transfer forever mmc: omap_hsmmc: Pass on the suspend failure to the PM core mmc: atmel-mci: AP700x PDC is not connected to MCI mmc: atmel-mci: DMA can be used with other controllers mmc: mmci: use clk_prepare_enable and clk_disable_unprepare mmc: sdhci-s3c: Add device tree support mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ...
2012-10-09Merge tag 'omap-for-v3.7-rc1/fixes-asoc-regression-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: This branch contains regression fixes for omap4/5 ASoC audio that were caused by the fact that u-boot stopped muxing non essential pins. As omap audio and dmaengine development happens on these platforms, let's make sure they are usable. Of course this should have been fixed earlier and not during the -rc cycle. * tag 'omap-for-v3.7-rc1/fixes-asoc-regression-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ARM: OMAP: board-4430-sdp: Pin mux configuration for audio needs
2012-10-09Merge tag 'omap-for-v3.7-rc1/fixes-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: This branch contains one counter locking fix and an alignment fix. Other fixes are warning fixes, fixes for return value checks. I've also included removal of some extra semicolons, dropping of some duplicate includes, and an a change for wl12xx enumeration that are not strictly fixes but would be good to get out of the way for -rc1. * tag 'omap-for-v3.7-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon AM35xx: Add missing hwmod entry for the HDQ/1-Wire present in AM3505/3517 CPUs. ARM: OMAP2+: gpmc: annotate exit sections properly ARM: OMAP: fix return value check in realtime_counter_init() ARM: OMAP: hsmmc: fix return value check in omap_hsmmc_init_one() OMAPDSS: fix return value check in create_dss_pdev() ARM: OMAP2+: Add am335x evm and bone targets to common Makefile arm: increase FORCE_MAX_ZONEORDER for TI AM33XX ARM: OMAP: OMAP_DEBUG_LEDS needs to select LEDS_CLASS ARM: OMAP: rx51: Fix a section mismatch warn ARM: OMAP2+: Round of the carve out memory requested to section_size ARM: OMAP: counter: add locking to read_persistent_clock
2012-10-09ARM: be really quiet when building with 'make -s'Arnd Bergmann
Sometimes we want the kernel build process to only print messages on errors, e.g. in automated build testing. This uses the "kecho" macro that the build system provides to hide a few informational messages. Nothing changes for a regular "make" or "make V=1". Without this patch, building any ARM kernel results in: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Marek <mmarek@suse.cz>
2012-10-09Merge tag 'disintegrate-mtd-20121009' of ↵David Woodhouse
git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
2012-10-08ARM/dts: omap5-evm: pinmux configuration for audioPeter Ujfalusi
u-boot stopped configuring 'non essential' pins recently. The kernel needs to configure the mux for audio needs. Since the pinmux for these IPs are static let pinctrl to handle the mux configuration for. Configuring the mux for: twl6040 (audpwron), McPDM, DMIC, McBSP1 and McBSP2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM/dts: Add pinctrl driver entries for omap5Peter Ujfalusi
These all use the generic pinctrl-single driver for the padconf registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM/dts: omap4-panda: pinmux configuration for audioPeter Ujfalusi
u-boot stopped configuring 'non essential' pins recently. The kernel needs to configure the mux for audio needs. Since the pinmux for these IPs are static let pinctrl to handle the mux configuration for. Configuring the mux for: twl6040 (audpwron, irq), McPDM and McBSP1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM/dts: omap4-sdp: pinmux configuration for audioPeter Ujfalusi
u-boot stopped configuring 'non essential' pins recently. The kernel needs to configure the mux for audio needs. Since the pinmux for these IPs are static let pinctrl to handle the mux configuration for. Configuring the mux for: twl6040 (audpwron, irq), McPDM, DMIC, McBSP1 and McBSP2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM/dts: omap5-evm: Disable unused McBSP3Peter Ujfalusi
McBSP3 is not usable on OMAP4 SDP/Blaze (the pins used for McPDM). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM/dts: omap4-sdp: Disable unused McBSP3Peter Ujfalusi
McBSP3 is not usable on OMAP4 SDP/Blaze (the pins used for McPDM). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM/dts: omap4-panda: Disable unused audio IPsPeter Ujfalusi
McBSP2, McBSP3 and DMIC is not usable on PandaBoard (not connected, no external pins provided for them). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08ARM: OMAP2+: Add am335x evm and bone targets to common MakefileVaibhav Hiremath
This adds am335x-evm and am335x-bone dtb targets to 'make dtbs', just like other platforms. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08MXS: Implement DMA support into mxs-i2cMarek Vasut
This patch implements DMA support into mxs-i2c. DMA transfers are now enabled via DT. The DMA operation is enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> [wsa: rebased to 3.6-rc7] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-10-08Merge tag 'v3.6-rc7' into i2c-embedded/for-nextWolfram Sang
Linux 3.6-rc7 Needed to get updates from i2c-embedded/for-current into i2c-embedded/for-next
2012-10-07mmc: sdhci-spear: add device tree bindingsViresh Kumar
This adds simple DT bindings for SDHCI SPEAr controller. It uses cd-gpios from common mmc bindings. This also fixes spear300-evb.dts with correct name for card detect binding. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07ARM: dts: remove redundant imx dtb targets from MakefileShawn Guo
We already have CONFIG_ARCH_MXC cover imx5 and imx6 dtb targets. Remove the redundant ones with CONFIG_ARCH_IMX5 and CONFIG_SOC_IMX6Q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07dtb: Add arch-vt8500 board files to arch/arm/boot/dts/MakefileTony Prisk
Add board files (vt8500-bv07, wm8505-ref and wm8650-mid) to allow 'make dtbs' on arch-vt8500. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07ARM: tegra: fix invalid unit-address in tegra*.dtsiStephen Warren
Unit addresses, whilst written in hex, don't contain a 0x prefix. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "This is the first chunk of ARM updates for this merge window. Conflicts are expected in two files - asm/timex.h and mach-integrator/integrator_cp.c. Nothing particularly stands out more than anything else. Most of the growth is down to the opcodes stuff from Dave Martin, which is countered by Rob's patches to use more of the asm-generic headers on ARM." (A few more conflicts grew since then, but it all looked fairly trivial) * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits) ARM: 7548/1: include linux/sched.h in syscall.h ARM: 7541/1: Add ARM ERRATA 775420 workaround ARM: ensure vm_struct has its phys_addr member filled in ARM: 7540/1: kexec: Check segment memory addresses ARM: 7539/1: kexec: scan for dtb magic in segments ARM: 7538/1: delay: add registration mechanism for delay timer sources ARM: 7536/1: smp: Formalize an IPI for wakeup ARM: 7525/1: ptrace: use updated syscall number for syscall auditing ARM: 7524/1: support syscall tracing ARM: 7519/1: integrator: convert platform devices to Device Tree ARM: 7518/1: integrator: convert AMBA devices to device tree ARM: 7517/1: integrator: initial device tree support ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ ARM: 7515/1: integrator: check PL010 base address from resource ARM: 7514/1: integrator: call common init function from machine ARM: 7522/1: arch_timers: register a time/cycle counter ARM: 7523/1: arch_timers: enable the use of the virtual timer ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental ARM: 7520/1: Build dtb files in all target ARM: Fix build warning in arch/arm/mm/alignment.c ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-20 08:12:32 +0000