summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-05Rename preempt-rt.config to preempt-rt.conf to follow the general ruleconfig-core-4.1Andrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2015-11-03linaro/configs: add preempt-rt.configAnders Roxell
For the RT patchset, add a preempt-rt fragment to the "mainline" fragment directory to make it easier to build automatically without having to go into menuconfig and select the Fully Preemptible Kernel (RT) to be the Preemption Model and to turn of CPU Frequency scaling. It isn't mandatory to turn off CPU_FREQ. However, you get a more predictable latency range. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org>
2015-06-11linaro-base.conf: remove duplicatesAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2015-01-11audit.conf: remove AUDIT_ARCH_COMPAT_GENERICconfig-core-3.18Fathi Boudra
cause CONFIG_ARCH_VEXPRESS to be disabled Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2015-01-09audit.conf: add config fragment to enable auditFathi Boudra
The purpose of the config fragment is to enable the audit feature testing on ARMv8. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-12-08configs: Enable SELinux related configsVishal Bhoj
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-12-04configs: reorganize linaro-base*.conf config fragmentsAndrey Konovalov
Currently we have linaro-base.conf (all basic config options, arch/arm specific included), and linaro-base64.conf (config options we use for arm64 builds). So for arm 32-bit builds one should use linaro-base.conf, while for arm 64-bit ones - linaro-base.conf *plus* linaro-base64.conf. This is 1) confusing (some patches I receive treat linaro-base64.conf as the only linaro-base* fragment to be used for 64-bit builds, and do the same changes to both linaro-base.conf and linaro-base64.conf), and 2) not quite right to have arch/arm specific options in the config fragment used for arch/arm64 builds. Let's leave all the generic options in linaro-base.conf, and put the arch specific ones into separate config fragments. So that the use pattern would become the same for arm 32-bit and 64-bit builds: * 32-bit case: use linaro-base.conf plus linaro-base-arm.conf * 64-bit case: use linaro-base.conf plus linaro-base-arm64.conf Not to break the current builds, the options moved to linaro-base-arm.conf are not removed from linaro-base.conf by this commit. This will be done later, when all the builds are updated to use linaro-base.conf plus linaro-base-arm.conf. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-12-02distribution.conf: enable device tree runtime self testsNaresh Kamboju
This will add few extra prints to the boot log. Example log: [ 9.860954] ### dt-test ### start of selftest - you will see error messages [ 9.861889] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 9.861898] /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 9.861912] /testcase-data/phandle-tests/consumer-a: could not find phandle [ 9.861924] /testcase-data/phandle-tests/consumer-a: could not find phandle [ 9.861935] /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 9.861945] /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 9.863717] irq: no irq domain found for /testcase-data/interrupts/intc0 ! [ 9.868324] ### dt-test ### end of selftest - 96 passed, 0 failed Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-09-29distribution.conf: CONFIG_IPV6=mconfig-core-3.17Andrey Konovalov
Now that the android topic is fixed, CONFIG_IPV6=y is no longer needed. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-09-26configs: Add config fragment for gcovRiku Voipio
This patch adds config options to enable gcov profile. CONFIG_GCOV_KERNEL=y CONFIG_GCOV_PROFILE_ALL=y CONFIG_GCOV_FORMAT_AUTODETECT=y From: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-09-26linaro-base.conf: enable DEBUG_INFO for perf testsFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26configs: android: Enable SELinux related configsVishal Bhoj
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
2014-09-26linaro-base.conf: enable GPIO_SYSFSFathi Boudra
It's required by powerdebug. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26uprobes: add CONFIG_USER_NS=yAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-09-26bigendian.conf: remove CONFIG_CPU_BE8_BOOT_LEAndrey Konovalov
CONFIG_CPU_BE8_BOOT_LE is not present in 3.14. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-09-26distribution.conf: use CC_STACKPROTECTOR_REGULAR introduced in 3.14Fathi Boudra
In 3.14, CONFIG_CC_STACKPROTECTOR_STRONG is introduced and CONFIG_CC_STACKPROTECTOR is renamed to CONFIG_CC_STACKPROTECTOR_REGULAR. http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=8779657d29c0ebcc0c94ede4df2f497baf1b563f Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26uprobes: clean up uprobes config fragments from uneeded configsFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26configs: android: Add ION configs to android framgmentJohn Stultz
In order to make sure we build ION in future builds, enable ION core as well as the test and dummy drivers. Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Fathi Boudra <fathi.boudra@linaro.org> Cc: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-09-26android.conf: enable CONFIG_SYNC and familyAmit Pundir
SYNC configs are used in validating "sync" tests available in linaro-android-kernel-tests private repo. Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
2014-09-26configs: Add config fragments for uprobes/kprobeNaresh Kamboju
This patch adds config fragments to enable uprobes/kprobes, relay and debug info Following in-built kprobes tests enabled. - KPROBES_SANITY_TEST - ARM_KPROBES_TEST Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
2014-09-26distribution.conf: enable BLK_DEV_LOOPRiku Voipio
LOOP block device is needed by kpartx and other tools for loopback mounts. Enable it in distribution conf to have it everywhere. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-09-26distribution: enable NETFILTER_XT_MATCH_CONNTRACK (LP: #1255382)Fathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26distribution: enable more modules for netfilter and bridgingFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26distribution: enable xtables "state" match supportFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26kvm-host: turn ethernet bridging to moduleFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26distribution.conf: add more options for libvirt/openstackAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-09-26configs: Add config fragments for big LITTLE IKSNaresh Kamboju
This patch adds config fragments used to enable most of the features used by big LITTLE IKS. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
2014-09-26configs: add network namespace and virtual ethernetZi Shen Lim
Network namespace and virtual ethernet are a useful combination for networking related testing, containers, etc. Enable namespaces, which by default includes network namespace. Also enable virtual ethernet support. Signed-off-by: Zi Shen Lim <zishen.lim@linaro.org>
2014-09-26distribution.conf: add more netfilter configs for the ltp networking iptable ↵Vincent Hsu
test Signed-off-by: Vincent Hsu <vincent.hsu@linaro.org>
2014-09-26linaro/configs: add hugepage config fragmentZi Shen Lim
Signed-off-by: Zi Shen Lim <zishen.lim@linaro.org>
2014-09-26linaro/configs/kvm-guest: add extra devicesRyan Harkin
Add extra devices needed for arm64 KVM testing. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Signed-off-by: Jon Medhurst <tixy@linaro.org> Acked-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26configs: Add config fragments for bigendian ARMV7 LinuxVictor Kamensky
This patch adds config fragments to enable big endian mode for Linux kernel. Note at this point CONFIG_VIRTUALIZATION explicitly disabled - BE kernel does not work with it yet. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
2014-09-26configs: create linaro-base64.conf for generic ARM64 config optionsAndrey Konovalov
... and put the options required for libhugetlbfs into it. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2014-09-26distribution.conf: enable BRIDGE_EBT_T_NAT, required by libvirtFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26Get rid of ubuntu-minimal config fragmentFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26linaro-base.conf: CONFIG_HOTPLUG has been eradicatedFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26kvm-host.conf: enable guest OS networkingKim Phillips
Bridge and TUN/TAP support are needed for enabling networking with a guest OS. Signed-off-by: Kim Phillips <kim.phillips@linaro.org> Acked-by: Riku Voipio <riku.voipio@linaro.org>
2014-09-26Add snippet for xen-enabled kernelsWookey
2014-09-26linaro-base.conf: remove CONFIG_MTD_CHAR=y - it doesn't exist anymore.Fathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26distribution.conf: add more configs for libvirt (NETFILTER_XT_CONNMARK,Fathi Boudra
NETFILTER_XT_MARK, NETFILTER_XT_TARGET_CHECKSUM, BRIDGE_EBT_MARK_T) Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26kvm-host.conf: remove CONFIG_NFS_*, NFS support is enabled fromFathi Boudra
linaro-base.conf Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26add NBD guestfs accessRiku Voipio
2014-09-26kvm-host: set CONFIG_VIRTUALIZATION=yRiku Voipio
2014-09-26kvm-host: remove mmc debugRiku Voipio
2014-09-26kvm-host: enable nfs for convinienceRiku Voipio
2014-09-26thumb2 kernels broken as kvm guestsRiku Voipio
2014-09-26configs: add kvm configsRiku Voipio
kvm-host is for any target where we want to run kvm - currently only arndale kvm-guest is for - currently only vexpress
2014-09-26linaro-base.conf: disbale CONFIG_NFS_V2Fathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26distribution.conf: add CONFIG_BRIDGE=mFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2014-09-26Add CONFIG_BRIDGE_NETFILTER and CONFIG_BRIDGE_NF_EBTABLES for libvirtFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-20 04:18:57 +0000