summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-30linaro/configs: arndale: Enable USB3503 HSIC driverconfig-boards-3.11Tushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-08-21configs: omap2plus.conf: use distribution.conf choices for conflicting optionsAndrey Konovalov
This lets us merging distribution.conf and omap2plus.conf in any order with the same result. Before that distribution.conf must be merged last to have linux-linaro build to complete ok. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-08-19configs: panda: split the config fragment into mainline and Linaro partsAndrey Konovalov
omap2plus_defconfig is actively maintained by the community. Linaro needs just few kernel config options in addition to the ones in omap2plus_defconfig. So it makes sense to track omap2plus_defconfig by omap2plus.conf, and to keep the small set of Linaro specific options for Panda board in panda.conf. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23linaro/configs: arndale: Enable fixed-voltage regulator supportTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23arndale.conf: enable CONFIG_TUNAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23arndale.conf: remove DEBUG_LL and EARLY_PRINTKAndrey Konovalov
Also remove DEBUG_S3C_UART2=y as it depends on the above options. These debugging options are causing problems to XEN. If still needed, could be moved to a separate config fragment. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23configs: highbank: Enable SCSI disk supportAndrey Konovalov
This is required by the current highbank CI setup - the rootfs is on hard drive. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23highbank.conf: enforce CONFIG_SCSI in the board config fragment.Fathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2013-07-23highbank.conf: remove CONFIG_PREEMPT=yFathi Boudra
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2013-07-23configs: omap4: Update USB config optionsAndrey Konovalov
Drop obsoleted CONFIG_USB_SUSPEND (it is removed from mainline), add proper USB PHY settings required for USB host to work. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23configs: vexpress64: Enable CONFIG_COMPATAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23omap4.conf: add CONFIG_SERIAL_OMAP and CONFIG_LEDS_CLASSAndrey Konovalov
The SERIAL_OMAP options aren't selected by ARCH_OMAP2PLUS_TYPICAL any more. See the mainline commit eb16d33273532533400cb95189aa50d6b734db57 "ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP". Also CONFIG_LEDS_CLASS is now needed to have LEDS_GPIO available. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23linaro/configs: arndale: Enable configs to support suspend/resumeTushar Behera
Mark the SD/MMC cards as non-removable and enable support for GPIO buttons. Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23linaro/configs: arndale: Enable USB supportTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23linaro/configs: arndale: Update as per 3.10-rc1 kernelTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23linaro/configs: arndale: Set CONFIG_PREEMPT_NONETushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23linaro/configs: arndale: Remove default/unnecessary optionsTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23linaro/configs: arndale: Enable runtime PM supportTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23linaro/configs: arndale: Use 2G/2G memory splitTushar Behera
Arndale has 2GB of RAM. Using 3G/1G memory split, half of the board's RAM ends up being "highmem", severely impacting system performance. It also means that kernel code must explicitly manage mapping in/out of any code/data resident above physical address 0x80000000. Using 2G/2G memory split is the optimum configuration. Suggested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23omap4.conf: Disable OMAP2 supportPeter Ujfalusi
When the kernel is built with CONFIG_ARCH_OMAP2 it will select CPU_V6 and other dependencies which causes issues in user space. For example when clients try to connect to PulseAudio they will crash with: Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting. Remove support for OMAP2 for now. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2013-07-23configs: vexpress: Enable the RTCJon Medhurst
The AEMv8 model supports this, so lets enable it. Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: vexpress64: Disable CONFIG_SERIO_I8042Jon Medhurst
This defaults to 'y' but produces a kernel oops at boot. Perhaps ARM64 should be added to the long list of architectures excluded in drivers/input/serio/Kconfig. Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: vexpress64: Disable CONFIG_VGA_CONSOLEJon Medhurst
This defaults to 'y' but produces a compilations error. Perhaps ARM64 should be added to the long list of architectures excluded in drivers/video/console/Kconfig. Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: vexpress64: Reduce config to minimum required for board supportJon Medhurst
Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: arndale: disable CONFIG_DEBUG_MUTEXESAndrey Konovalov
This debug option adds significant overhead. E.g. netperf on the loopback improves by ~200% with DEBUG_MUTEXES disabled. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23omap4.conf: Enable audio for PandaBoard (OMAP4)Peter Ujfalusi
For audio the twl6040 stack need to be enabled Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2013-07-23configs: vexpress64: Fixes for Linux 3.9Jon Medhurst
CONFIG_PLAT_VEXPRESS has been renamed to CONFIG_ARCH_VEXPRESS and CONFIG_EXPERIMENTAL has been removed. Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: vexpress: Enable LEDsJon Medhurst
To provide access to LEDs enable CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y (LED's are available from user side under under /sys/class/leds) To use the motherboard LEDs to show CPU activity... CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23u8500.conf: update the conf fragment from v3.9-rc3 u8500_defconfigAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23omap4.conf: disable CONFIG_CPU_FREQ for 13.03 to make Panda ES to bootAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23configs: omap4: update omap4.conf for 3.9Andrey Konovalov
The main reason for the update is omap2+ having moved to multiplatform kernel. The new omap4.conf is based on the omap2plus_defconfig, but in addition enables USB_EHCI_HCD and USB_OHCI_HCD, so that USB host and ethernet would work on Panda. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23configs: vexpress64: Enable regulator configsJon Medhurst
New device-trees include regulators and MMC driver gives errors if it can't find them. Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: vexpress: Changes needed for Linux 3.9Jon Medhurst
Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: vexpress: Changes needed for Linux 3.8Jon Medhurst
Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23vexpress64: enable MMC needed for RTSM to bootMarcin Juszkiewicz
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
2013-07-23linaro/configs: arndale: Enable USB-Ethernet driversTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23linaro/configs: arndale: Add initial board config fragmentTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23Add config for HighbankFathi Boudra
2013-07-23enable VIRTIO_BLKMarcin Juszkiewicz
Signed-off-by: John Rigby <john.rigby@linaro.org>
2013-07-23u8500.conf: remove CONFIG_LBDAF and add CONFIG_EXT4_FSFathi Boudra
Remove CONFIG_LBDAF: fix Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF. Add CONFIG_EXT4_FS: enable ext4 fs, default filesystem on Linaro rootfs. It will allow to boot out of the box with linaro-image-tools. See https://bugs.launchpad.net/bugs/1081904 Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
2013-07-23defconfig from latest vexpress_defconfigJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2013-07-23configs: omap4: enable OMAP DMA engine driverAndrey Konovalov
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2013-07-23linaro/configs: origen: Enable mainline componentsTushar Behera
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
2013-07-23configs: vexpress: Enable CONFIG_SMC91XJon Medhurst
This is the ethernet device RTSM models and we want normal vexpress kernels also working on RTSM. Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23configs: vexpress: Basic board config fragmentJon Medhurst
Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-07-23null config for testing multiple fragsJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2013-07-23update u8500.conf with one generated from make savedefconfigJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2013-07-23disable CONFIG_REGULATOR_DB8500_PRCMUJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2013-07-23Copy of u8500 config from 3.4 treeJohn Rigby
Signed-off-by: John Rigby <john.rigby@linaro.org>
2013-07-23vexpress64.conf: updating config based on the reference config from omar's treeRicardo Salveti de Araujo
Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 06:33:22 +0000