summaryrefslogtreecommitdiff
path: root/include/asm-x86/io_64.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86/io_64.h')
-rw-r--r--include/asm-x86/io_64.h244
1 files changed, 0 insertions, 244 deletions
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
deleted file mode 100644
index ee6e086b7df..00000000000
--- a/include/asm-x86/io_64.h
+++ /dev/null
@@ -1,244 +0,0 @@
-#ifndef ASM_X86__IO_64_H
-#define ASM_X86__IO_64_H
-
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- * Linus
- */
-
- /*
- * Bit simplified and optimized by Jan Hubicka
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
- *
- * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
- * isa_read[wl] and isa_write[wl] fixed
- * - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- */
-
-extern void native_io_delay(void);
-
-extern int io_delay_type;
-extern void io_delay_init(void);
-
-#if defined(CONFIG_PARAVIRT)
-#include <asm/paravirt.h>
-#else
-
-static inline void slow_down_io(void)
-{
- native_io_delay();
-#ifdef REALLY_SLOW_IO
- native_io_delay();
- native_io_delay();
- native_io_delay();
-#endif
-}
-#endif
-
-/*
- * Talk about misusing macros..
- */
-#define __OUT1(s, x) \
-static inline void out##s(unsigned x value, unsigned short port) {
-
-#define __OUT2(s, s1, s2) \
-asm volatile ("out" #s " %" s1 "0,%" s2 "1"
-
-#ifndef REALLY_SLOW_IO
-#define REALLY_SLOW_IO
-#define UNSET_REALLY_SLOW_IO
-#endif
-
-#define __OUT(s, s1, x) \
- __OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
- } \
- __OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
- slow_down_io(); \
-}
-
-#define __IN1(s) \
-static inline RETURN_TYPE in##s(unsigned short port) \
-{ \
- RETURN_TYPE _v;
-
-#define __IN2(s, s1, s2) \
- asm volatile ("in" #s " %" s2 "1,%" s1 "0"
-
-#define __IN(s, s1, i...) \
- __IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \
- return _v; \
- } \
- __IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \
- slow_down_io(); \
- return _v; }
-
-#ifdef UNSET_REALLY_SLOW_IO
-#undef REALLY_SLOW_IO
-#endif
-
-#define __INS(s) \
-static inline void ins##s(unsigned short port, void *addr, \
- unsigned long count) \
-{ \
- asm volatile ("rep ; ins" #s \
- : "=D" (addr), "=c" (count) \
- : "d" (port), "0" (addr), "1" (count)); \
-}
-
-#define __OUTS(s) \
-static inline void outs##s(unsigned short port, const void *addr, \
- unsigned long count) \
-{ \
- asm volatile ("rep ; outs" #s \
- : "=S" (addr), "=c" (count) \
- : "d" (port), "0" (addr), "1" (count)); \
-}
-
-#define RETURN_TYPE unsigned char
-__IN(b, "")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned short
-__IN(w, "")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned int
-__IN(l, "")
-#undef RETURN_TYPE
-
-__OUT(b, "b", char)
-__OUT(w, "w", short)
-__OUT(l, , int)
-
-__INS(b)
-__INS(w)
-__INS(l)
-
-__OUTS(b)
-__OUTS(w)
-__OUTS(l)
-
-#define IO_SPACE_LIMIT 0xffff
-
-#if defined(__KERNEL__) && defined(__x86_64__)
-
-#include <linux/vmalloc.h>
-
-#ifndef __i386__
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
- return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
- return __va(address);
-}
-#endif
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-#include <asm-generic/iomap.h>
-
-/*
- * This one maps high address device memory and turns off caching for that area.
- * it's useful if some control registers are in such an area and write combining
- * or read caching is not desirable:
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
- unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
- return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-void __memcpy_fromio(void *, unsigned long, unsigned);
-void __memcpy_toio(unsigned long, const void *, unsigned);
-
-static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
- unsigned len)
-{
- __memcpy_fromio(to, (unsigned long)from, len);
-}
-
-static inline void memcpy_toio(volatile void __iomem *to, const void *from,
- unsigned len)
-{
- __memcpy_toio((unsigned long)to, from, len);
-}
-
-void memset_io(volatile void __iomem *a, int b, size_t c);
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-
-#define flush_write_buffers()
-
-#define BIO_VMERGE_BOUNDARY iommu_bio_merge
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_X86__IO_64_H */