1 files changed, 101 insertions, 98 deletions

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b9465643396..ca508474313 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -17,6 +17,9 @@
 #include <asm/prom.h>
 #endif
 
+#include <target/target_core_base.h>
+#include "qla_target.h"
+
 /*
 *  QLogic ISP2x00 Hardware Support Function Prototypes.
 */
@@ -518,7 +521,10 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
 			return QLA_FUNCTION_FAILED;
 		}
 	}
-	rval = qla2x00_init_rings(vha);
+
+	if (qla_ini_mode_enabled(vha))
+		rval = qla2x00_init_rings(vha);
+
 	ha->flags.chip_reset_done = 1;
 
 	if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) {
@@ -1233,6 +1239,8 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
 			mq_size += ha->max_rsp_queues *
 			    (rsp->length * sizeof(response_t));
 		}
+		if (ha->tgt.atio_q_length)
+			mq_size += ha->tgt.atio_q_length * sizeof(request_t);
 		/* Allocate memory for Fibre Channel Event Buffer. */
 		if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha))
 			goto try_eft;
@@ -1696,6 +1704,12 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
 	icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
 	icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));
 
+	/* Setup ATIO queue dma pointers for target mode */
+	icb->atio_q_inpointer = __constant_cpu_to_le16(0);
+	icb->atio_q_length = cpu_to_le16(ha->tgt.atio_q_length);
+	icb->atio_q_address[0] = cpu_to_le32(LSD(ha->tgt.atio_dma));
+	icb->atio_q_address[1] = cpu_to_le32(MSD(ha->tgt.atio_dma));
+
 	if (ha->mqenable || IS_QLA83XX(ha)) {
 		icb->qos = __constant_cpu_to_le16(QLA_DEFAULT_QUE_QOS);
 		icb->rid = __constant_cpu_to_le16(rid);
@@ -1739,6 +1753,8 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
 		WRT_REG_DWORD(&reg->isp24.rsp_q_in, 0);
 		WRT_REG_DWORD(&reg->isp24.rsp_q_out, 0);
 	}
+	qlt_24xx_config_rings(vha, reg);
+
 	/* PCI posting */
 	RD_REG_DWORD(&ioreg->hccr);
 }
@@ -1794,6 +1810,11 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 
 	spin_unlock(&ha->vport_slock);
 
+	ha->tgt.atio_ring_ptr = ha->tgt.atio_ring;
+	ha->tgt.atio_ring_index = 0;
+	/* Initialize ATIO queue entries */
+	qlt_init_atio_q_entries(vha);
+
 	ha->isp_ops->config_rings(vha);
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -2051,6 +2072,10 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
 	vha->d_id.b.area = area;
 	vha->d_id.b.al_pa = al_pa;
 
+	spin_lock(&ha->vport_slock);
+	qlt_update_vp_map(vha, SET_AL_PA);
+	spin_unlock(&ha->vport_slock);
+
 	if (!vha->flags.init_done)
 		ql_log(ql_log_info, vha, 0x2010,
 		    "Topology - %s, Host Loop address 0x%x.\n",
@@ -2185,7 +2210,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
 	    nv->id[2] != 'P' || nv->id[3] != ' ' || nv->nvram_version < 1) {
 		/* Reset NVRAM data. */
 		ql_log(ql_log_warn, vha, 0x0064,
-		    "Inconisistent NVRAM "
+		    "Inconsistent NVRAM "
 		    "detected: checksum=0x%x id=%c version=0x%x.\n",
 		    chksum, nv->id[0], nv->nvram_version);
 		ql_log(ql_log_warn, vha, 0x0065,
@@ -2270,7 +2295,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
 	if (IS_QLA23XX(ha)) {
 		nv->firmware_options[0] |= BIT_2;
 		nv->firmware_options[0] &= ~BIT_3;
-		nv->firmware_options[0] &= ~BIT_6;
+		nv->special_options[0] &= ~BIT_6;
 		nv->add_firmware_options[1] |= BIT_5 | BIT_4;
 
 		if (IS_QLA2300(ha)) {
@@ -2467,14 +2492,21 @@ qla2x00_rport_del(void *data)
 {
 	fc_port_t *fcport = data;
 	struct fc_rport *rport;
+	scsi_qla_host_t *vha = fcport->vha;
 	unsigned long flags;
 
 	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
 	rport = fcport->drport ? fcport->drport: fcport->rport;
 	fcport->drport = NULL;
 	spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
-	if (rport)
+	if (rport) {
 		fc_remote_port_delete(rport);
+		/*
+		 * Release the target mode FC NEXUS in qla_target.c code
+		 * if target mod is enabled.
+		 */
+		qlt_fc_port_deleted(vha, fcport);
+	}
 }
 
 /**
@@ -2495,11 +2527,11 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
 
 	/* Setup fcport template structure. */
 	fcport->vha = vha;
-	fcport->vp_idx = vha->vp_idx;
 	fcport->port_type = FCT_UNKNOWN;
 	fcport->loop_id = FC_NO_LOOP_ID;
 	qla2x00_set_fcport_state(fcport, FCS_UNCONFIGURED);
 	fcport->supported_classes = FC_COS_UNSPECIFIED;
+	fcport->scan_state = QLA_FCPORT_SCAN_NONE;
 
 	return fcport;
 }
@@ -2726,7 +2758,6 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 		new_fcport->d_id.b.area = area;
 		new_fcport->d_id.b.al_pa = al_pa;
 		new_fcport->loop_id = loop_id;
-		new_fcport->vp_idx = vha->vp_idx;
 		rval2 = qla2x00_get_port_database(vha, new_fcport, 0);
 		if (rval2 != QLA_SUCCESS) {
 			ql_dbg(ql_dbg_disc, vha, 0x201a,
@@ -2760,10 +2791,6 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
 
 		if (!found) {
 			/* New device, add to fcports list. */
-			if (vha->vp_idx) {
-				new_fcport->vha = vha;
-				new_fcport->vp_idx = vha->vp_idx;
-			}
 			list_add_tail(&new_fcport->list, &vha->vp_fcports);
 
 			/* Allocate a new replacement fcport. */
@@ -2800,8 +2827,6 @@ cleanup_allocation:
 static void
 qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
-#define LS_UNKNOWN      2
-	static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
 	char *link_speed;
 	int rval;
 	uint16_t mb[4];
@@ -2829,11 +2854,7 @@ qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		    fcport->port_name[6], fcport->port_name[7], rval,
 		    fcport->fp_speed, mb[0], mb[1]);
 	} else {
-		link_speed = link_speeds[LS_UNKNOWN];
-		if (fcport->fp_speed < 5)
-			link_speed = link_speeds[fcport->fp_speed];
-		else if (fcport->fp_speed == 0x13)
-			link_speed = link_speeds[5];
+		link_speed = qla2x00_get_link_speed_str(ha);
 		ql_dbg(ql_dbg_disc, vha, 0x2005,
 		    "iIDMA adjusted to %s GB/s "
 		    "on %02x%02x%02x%02x%02x%02x%02x%02x.\n", link_speed,
@@ -2864,6 +2885,12 @@ qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport)
 		    "Unable to allocate fc remote port.\n");
 		return;
 	}
+	/*
+	 * Create target mode FC NEXUS in qla_target.c if target mode is
+	 * enabled..
+	 */
+	qlt_fc_port_added(vha, fcport);
+
 	spin_lock_irqsave(fcport->vha->host->host_lock, flags);
 	*((fc_port_t **)rport->dd_data) = fcport;
 	spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
@@ -2921,7 +2948,7 @@ static int
 qla2x00_configure_fabric(scsi_qla_host_t *vha)
 {
 	int	rval;
-	fc_port_t	*fcport, *fcptemp;
+	fc_port_t	*fcport;
 	uint16_t	next_loopid;
 	uint16_t	mb[MAILBOX_REGISTER_COUNT];
 	uint16_t	loop_id;
@@ -2959,7 +2986,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 		    0xfc, mb, BIT_1|BIT_0);
 		if (rval != QLA_SUCCESS) {
 			set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
-			return rval;
+			break;
 		}
 		if (mb[0] != MBS_COMMAND_COMPLETE) {
 			ql_dbg(ql_dbg_disc, vha, 0x2042,
@@ -2991,21 +3018,16 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 			}
 		}
 
-#define QLA_FCPORT_SCAN		1
-#define QLA_FCPORT_FOUND	2
-
-		list_for_each_entry(fcport, &vha->vp_fcports, list) {
-			fcport->scan_state = QLA_FCPORT_SCAN;
-		}
-
 		rval = qla2x00_find_all_fabric_devs(vha, &new_fcports);
 		if (rval != QLA_SUCCESS)
 			break;
 
-		/*
-		 * Logout all previous fabric devices marked lost, except
-		 * FCP2 devices.
-		 */
+		/* Add new ports to existing port list */
+		list_splice_tail_init(&new_fcports, &vha->vp_fcports);
+
+		/* Starting free loop ID. */
+		next_loopid = ha->min_external_loopid;
+
 		list_for_each_entry(fcport, &vha->vp_fcports, list) {
 			if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
 				break;
@@ -3013,7 +3035,8 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 			if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
 				continue;
 
-			if (fcport->scan_state == QLA_FCPORT_SCAN &&
+			/* Logout lost/gone fabric devices (non-FCP2) */
+			if (fcport->scan_state != QLA_FCPORT_SCAN_FOUND &&
 			    atomic_read(&fcport->state) == FCS_ONLINE) {
 				qla2x00_mark_device_lost(vha, fcport,
 				    ql2xplogiabsentdevice, 0);
@@ -3026,78 +3049,30 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
 					    fcport->d_id.b.domain,
 					    fcport->d_id.b.area,
 					    fcport->d_id.b.al_pa);
-					fcport->loop_id = FC_NO_LOOP_ID;
 				}
-			}
-		}
-
-		/* Starting free loop ID. */
-		next_loopid = ha->min_external_loopid;
-
-		/*
-		 * Scan through our port list and login entries that need to be
-		 * logged in.
-		 */
-		list_for_each_entry(fcport, &vha->vp_fcports, list) {
-			if (atomic_read(&vha->loop_down_timer) ||
-			    test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
-				break;
-
-			if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
-			    (fcport->flags & FCF_LOGIN_NEEDED) == 0)
 				continue;
-
-			if (fcport->loop_id == FC_NO_LOOP_ID) {
-				fcport->loop_id = next_loopid;
-				rval = qla2x00_find_new_loop_id(
-				    base_vha, fcport);
-				if (rval != QLA_SUCCESS) {
-					/* Ran out of IDs to use */
-					break;
-				}
 			}
-			/* Login and update database */
-			qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
-		}
-
-		/* Exit if out of loop IDs. */
-		if (rval != QLA_SUCCESS) {
-			break;
-		}
-
-		/*
-		 * Login and add the new devices to our port list.
-		 */
-		list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
-			if (atomic_read(&vha->loop_down_timer) ||
-			    test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
-				break;
-
-			/* Find a new loop ID to use. */
-			fcport->loop_id = next_loopid;
-			rval = qla2x00_find_new_loop_id(base_vha, fcport);
-			if (rval != QLA_SUCCESS) {
-				/* Ran out of IDs to use */
-				break;
+			fcport->scan_state = QLA_FCPORT_SCAN_NONE;
+
+			/* Login fabric devices that need a login */
+			if ((fcport->flags & FCF_LOGIN_NEEDED) != 0 &&
+			    atomic_read(&vha->loop_down_timer) == 0) {
+				if (fcport->loop_id == FC_NO_LOOP_ID) {
+					fcport->loop_id = next_loopid;
+					rval = qla2x00_find_new_loop_id(
+					    base_vha, fcport);
+					if (rval != QLA_SUCCESS) {
+						/* Ran out of IDs to use */
+						continue;
+					}
+				}
 			}
 
 			/* Login and update database */
 			qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
-
-			if (vha->vp_idx) {
-				fcport->vha = vha;
-				fcport->vp_idx = vha->vp_idx;
-			}
-			list_move_tail(&fcport->list, &vha->vp_fcports);
 		}
 	} while (0);
 
-	/* Free all new device structures not processed. */
-	list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
-		list_del(&fcport->list);
-		kfree(fcport);
-	}
-
 	if (rval) {
 		ql_dbg(ql_dbg_disc, vha, 0x2068,
 		    "Configure fabric error exit rval=%d.\n", rval);
@@ -3287,7 +3262,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
 			    WWN_SIZE))
 				continue;
 
-			fcport->scan_state = QLA_FCPORT_FOUND;
+			fcport->scan_state = QLA_FCPORT_SCAN_FOUND;
 
 			found++;
 
@@ -3595,6 +3570,12 @@ qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
 			if (mb[10] & BIT_1)
 				fcport->supported_classes |= FC_COS_CLASS3;
 
+			if (IS_FWI2_CAPABLE(ha)) {
+				if (mb[10] & BIT_7)
+					fcport->flags |=
+					    FCF_CONF_COMP_SUPPORTED;
+			}
+
 			rval = QLA_SUCCESS;
 			break;
 		} else if (mb[0] == MBS_LOOP_ID_USED) {
@@ -3841,7 +3822,7 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 		vha->flags.online = 0;
 	ha->flags.chip_reset_done = 0;
 	clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-	ha->qla_stats.total_isp_aborts++;
+	vha->qla_stats.total_isp_aborts++;
 
 	ql_log(ql_log_info, vha, 0x00af,
 	    "Performing ISP error recovery - ha=%p.\n", ha);
@@ -4066,6 +4047,7 @@ qla2x00_restart_isp(scsi_qla_host_t *vha)
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
 	struct rsp_que *rsp = ha->rsp_q_map[0];
+	unsigned long flags;
 
 	/* If firmware needs to be loaded */
 	if (qla2x00_isp_firmware(vha)) {
@@ -4090,6 +4072,16 @@ qla2x00_restart_isp(scsi_qla_host_t *vha)
 			qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
 
 			vha->flags.online = 1;
+
+			/*
+			 * Process any ATIO queue entries that came in
+			 * while we weren't online.
+			 */
+			spin_lock_irqsave(&ha->hardware_lock, flags);
+			if (qla_tgt_mode_enabled(vha))
+				qlt_24xx_process_atio_queue(vha);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
 			/* Wait at most MAX_TARGET RSCNs for a stable link. */
 			wait_time = 256;
 			do {
@@ -4279,7 +4271,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	    nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
 		/* Reset NVRAM data. */
 		ql_log(ql_log_warn, vha, 0x006b,
-		    "Inconisistent NVRAM detected: checksum=0x%x id=%c "
+		    "Inconsistent NVRAM detected: checksum=0x%x id=%c "
 		    "version=0x%x.\n", chksum, nv->id[0], nv->nvram_version);
 		ql_log(ql_log_warn, vha, 0x006c,
 		    "Falling back to functioning (yet invalid -- WWPN) "
@@ -4330,6 +4322,15 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 		rval = 1;
 	}
 
+	if (!qla_ini_mode_enabled(vha)) {
+		/* Don't enable full login after initial LIP */
+		nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_13);
+		/* Don't enable LIP full login for initiator */
+		nv->host_p &= __constant_cpu_to_le32(~BIT_10);
+	}
+
+	qlt_24xx_config_nvram_stage1(vha, nv);
+
 	/* Reset Initialization control block */
 	memset(icb, 0, ha->init_cb_size);
 
@@ -4357,8 +4358,10 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
 	    "QLA2462");
 
-	/* Use alternate WWN? */
+	qlt_24xx_config_nvram_stage2(vha, icb);
+
 	if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
+		/* Use alternate WWN? */
 		memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
 		memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
 	}
@@ -5029,7 +5032,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	    nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
 		/* Reset NVRAM data. */
 		ql_log(ql_log_info, vha, 0x0073,
-		    "Inconisistent NVRAM detected: checksum=0x%x id=%c "
+		    "Inconsistent NVRAM detected: checksum=0x%x id=%c "
 		    "version=0x%x.\n", chksum, nv->id[0],
 		    le16_to_cpu(nv->nvram_version));
 		ql_log(ql_log_info, vha, 0x0074,