diff options
Diffstat (limited to 'arch/sh/boards/mach-se/7780/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-se/7780/setup.c | 47 |
1 files changed, 19 insertions, 28 deletions
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 1d3a867e94e..6f7c207138e 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -17,26 +17,17 @@ #include <asm/heartbeat.h> /* Heartbeat */ -static struct heartbeat_data heartbeat_data = { - .regsize = 16, -}; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, +static struct resource heartbeat_resource = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, + .num_resources = 1, + .resource = &heartbeat_resource, }; /* SMC91x */ @@ -84,14 +75,14 @@ device_initcall(se7780_devices_setup); static void __init se7780_setup(char **cmdline_p) { /* "SH-Linux" on LED Display */ - ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); - ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); - ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); - ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); - ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); - ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); - ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); - ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); + __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); + __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); + __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); + __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); + __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); + __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); + __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); + __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n"); @@ -102,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p) * REQ2/GNT2 -> Serial ATA * REQ3/GNT3 -> PCI slot */ - ctrl_outw(0x0213, FPGA_REQSEL); + __raw_writew(0x0213, FPGA_REQSEL); /* GPIO setting */ - ctrl_outw(0x0000, GPIO_PECR); - ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR); - ctrl_outw(0x0c00, GPIO_PMSELR); + __raw_writew(0x0000, GPIO_PECR); + __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR); + __raw_writew(0x0c00, GPIO_PMSELR); /* iVDR Power ON */ - ctrl_outw(0x0001, FPGA_IVDRPW); + __raw_writew(0x0001, FPGA_IVDRPW); } /* |