diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/pb1100/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1100/board_setup.c | 55 |
1 files changed, 15 insertions, 40 deletions
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c index 61263081ef5..c7b4caa81a3 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c @@ -29,19 +29,11 @@ #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1100.h> +#include <asm/mach-db1x00/bcsr.h> #include <prom.h> -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */ - { AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */ - { AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */ - { AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */ -}; - - const char *get_system_type(void) { return "Alchemy Pb1100"; @@ -49,43 +41,15 @@ const char *get_system_type(void) void board_reset(void) { - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1100_RST_VDDI); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); + bcsr_write(BCSR_SYSTEM, 0); } void __init board_setup(void) { volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } -#endif -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); @@ -155,3 +119,14 @@ void __init board_setup(void) au_sync(); } } + +static int __init pb1100_init_irq(void) +{ + set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ + set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ + set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ + set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ + + return 0; +} +arch_initcall(pb1100_init_irq); |