diff options
Diffstat (limited to 'arch/blackfin/include/asm/bfin_sport.h')
| -rw-r--r-- | arch/blackfin/include/asm/bfin_sport.h | 128 |
1 files changed, 1 insertions, 127 deletions
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index f8907ea6b5b..50b9dfd4839 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -5,65 +5,12 @@ * * Licensed under the GPL-2 or later. */ - #ifndef __BFIN_SPORT_H__ #define __BFIN_SPORT_H__ -/* Sport mode: it can be set to TDM, i2s or others */ -#define NORM_MODE 0x0 -#define TDM_MODE 0x1 -#define I2S_MODE 0x2 -#define NDSO_MODE 0x3 - -/* Data format, normal, a-law or u-law */ -#define NORM_FORMAT 0x0 -#define ALAW_FORMAT 0x2 -#define ULAW_FORMAT 0x3 - -/* Function driver which use sport must initialize the structure */ -struct sport_config { - /* TDM (multichannels), I2S or other mode */ - unsigned int mode:3; - unsigned int polled; /* use poll instead of irq when set */ - - /* if TDM mode is selected, channels must be set */ - int channels; /* Must be in 8 units */ - unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */ - - /* I2S mode */ - unsigned int right_first:1; /* Right stereo channel first */ - - /* In mormal mode, the following item need to be set */ - unsigned int lsb_first:1; /* order of transmit or receive data */ - unsigned int fsync:1; /* Frame sync required */ - unsigned int data_indep:1; /* data independent frame sync generated */ - unsigned int act_low:1; /* Active low TFS */ - unsigned int late_fsync:1; /* Late frame sync */ - unsigned int tckfe:1; - unsigned int sec_en:1; /* Secondary side enabled */ - - /* Choose clock source */ - unsigned int int_clk:1; /* Internal or external clock */ - - /* If external clock is used, the following fields are ignored */ - int serial_clk; - int fsync_clk; - - unsigned int data_format:2; /* Normal, u-law or a-law */ - - int word_len; /* How length of the word in bits, 3-32 bits */ - int dma_enabled; -}; - -/* Userspace interface */ -#define SPORT_IOC_MAGIC 'P' -#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) -#define SPORT_IOC_GET_SYSTEMCLOCK _IOR('P', 0x02, unsigned long) -#define SPORT_IOC_SET_BAUDRATE _IOW('P', 0x03, unsigned long) - -#ifdef __KERNEL__ #include <linux/types.h> +#include <uapi/asm/bfin_sport.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -122,76 +69,3 @@ struct bfin_snd_platform_data { }) #endif - -/* SPORT_TCR1 Masks */ -#define TSPEN 0x0001 /* TX enable */ -#define ITCLK 0x0002 /* Internal TX Clock Select */ -#define TDTYPE 0x000C /* TX Data Formatting Select */ -#define DTYPE_NORM 0x0000 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define TLSBIT 0x0010 /* TX Bit Order */ -#define ITFS 0x0200 /* Internal TX Frame Sync Select */ -#define TFSR 0x0400 /* TX Frame Sync Required Select */ -#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ -#define LTFS 0x1000 /* Low TX Frame Sync Select */ -#define LATFS 0x2000 /* Late TX Frame Sync Select */ -#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ - -/* SPORT_TCR2 Masks */ -#define SLEN 0x001F /* SPORT TX Word Length (2 - 31) */ -#define DP_SLEN(x) BFIN_DEPOSIT(SLEN, x) -#define EX_SLEN(x) BFIN_EXTRACT(SLEN, x) -#define TXSE 0x0100 /* TX Secondary Enable */ -#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ -#define TRFST 0x0400 /* TX Right-First Data Order */ - -/* SPORT_RCR1 Masks */ -#define RSPEN 0x0001 /* RX enable */ -#define IRCLK 0x0002 /* Internal RX Clock Select */ -#define RDTYPE 0x000C /* RX Data Formatting Select */ -/* DTYPE_* defined above */ -#define RLSBIT 0x0010 /* RX Bit Order */ -#define IRFS 0x0200 /* Internal RX Frame Sync Select */ -#define RFSR 0x0400 /* RX Frame Sync Required Select */ -#define LRFS 0x1000 /* Low RX Frame Sync Select */ -#define LARFS 0x2000 /* Late RX Frame Sync Select */ -#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ - -/* SPORT_RCR2 Masks */ -/* SLEN defined above */ -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ - -/* SPORT_STAT Masks */ -#define RXNE 0x0001 /* RX FIFO Not Empty Status */ -#define RUVF 0x0002 /* RX Underflow Status */ -#define ROVF 0x0004 /* RX Overflow Status */ -#define TXF 0x0008 /* TX FIFO Full Status */ -#define TUVF 0x0010 /* TX Underflow Status */ -#define TOVF 0x0020 /* TX Overflow Status */ -#define TXHRE 0x0040 /* TX Hold Register Empty */ - -/* SPORT_MCMC1 Masks */ -#define SP_WOFF 0x03FF /* Multichannel Window Offset Field */ -#define DP_SP_WOFF(x) BFIN_DEPOSIT(SP_WOFF, x) -#define EX_SP_WOFF(x) BFIN_EXTRACT(SP_WOFF, x) -#define SP_WSIZE 0xF000 /* Multichannel Window Size Field */ -#define DP_SP_WSIZE(x) BFIN_DEPOSIT(SP_WSIZE, x) -#define EX_SP_WSIZE(x) BFIN_EXTRACT(SP_WSIZE, x) - -/* SPORT_MCMC2 Masks */ -#define MCCRM 0x0003 /* Multichannel Clock Recovery Mode */ -#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ -#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ -#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ -#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ -#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ -#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ -#define MFD 0xF000 /* Multichannel Frame Delay */ -#define DP_MFD(x) BFIN_DEPOSIT(MFD, x) -#define EX_MFD(x) BFIN_EXTRACT(MFD, x) - -#endif |