summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa')
-rw-r--r--arch/arm/mach-pxa/include/mach/colibri.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/regs-u2d.h3
-rw-r--r--arch/arm/mach-pxa/raumfeld.c5
-rw-r--r--arch/arm/mach-pxa/spitz.c2
-rw-r--r--arch/arm/mach-pxa/viper.c5
6 files changed, 10 insertions, 8 deletions
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 811743c5614..5f2ba8d9015 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -2,6 +2,7 @@
#define _COLIBRI_H_
#include <net/ax88796.h>
+#include <mach/mfp.h>
/*
* common settings for all modules
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 7515757d691..3d8d8cb0968 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -202,7 +202,7 @@
#define __cpu_is_pxa950(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- id == 0x697; \
+ _id == 0x697; \
})
#else
#define __cpu_is_pxa950(id) (0)
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
index 44b0b20b69a..c15c0c57de0 100644
--- a/arch/arm/mach-pxa/include/mach/regs-u2d.h
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -166,7 +166,8 @@
#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */
#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */
#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */
-#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */
#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */
#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 44bb675e47f..d12667bd9eb 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -983,7 +983,7 @@ static void __init raumfeld_common_init(void)
int i;
for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
- if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+ if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
gpio_keys_button[i].active_low = 1;
}
@@ -1009,8 +1009,7 @@ static void __init raumfeld_common_init(void)
gpio_direction_output(GPIO_W2W_PDN, 0);
/* this can be used to switch off the device */
- ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
- "supply shutdown");
+ ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
if (ret < 0)
pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
else
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 19b5109d980..01bdd7500df 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -363,7 +363,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
.type = EV_PWR,
.code = KEY_SUSPEND,
.gpio = SPITZ_GPIO_ON_KEY,
- .desc = "On/Off",
+ .desc = "On Off",
.wakeup = 1,
},
/* Two buttons detecting the lid state */
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 9e0c5c3988a..e90114a7e24 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -34,6 +34,7 @@
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/gpio.h>
+#include <linux/jiffies.h>
#include <linux/i2c-gpio.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
@@ -454,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = {
.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
static struct platform_device i2c_bus_device = {
@@ -779,7 +780,7 @@ static void __init viper_tpm_init(void)
.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
char *errstr;