diff options
Diffstat (limited to 'arch/arm/mach-pxa/cm-x270-pci.c')
| -rw-r--r-- | arch/arm/mach-pxa/cm-x270-pci.c | 220 |
1 files changed, 0 insertions, 220 deletions
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c deleted file mode 100644 index 2d5bcea1e52..00000000000 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/cm-x270-pci.c - * - * PCI bios-type initialisation for PCI machines - * - * Bits taken from various places. - * - * Copyright (C) 2007, 2008 Compulab, Ltd. - * Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/gpio.h> - -#include <asm/mach/pci.h> -#include <mach/pxa-regs.h> -#include <asm/mach-types.h> - -#include <asm/hardware/it8152.h> - -unsigned long it8152_base_address; -static int cmx270_it8152_irq_gpio; - -/* - * Only first 64MB of memory can be accessed via PCI. - * We use GFP_DMA to allocate safe buffers to do map/unmap. - * This is really ugly and we need a better way of specifying - * DMA-capable regions of memory. - */ -void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, - unsigned long *zhole_size) -{ - unsigned int sz = SZ_64M >> PAGE_SHIFT; - - if (machine_is_armcore()) { - pr_info("Adjusting zones for CM-X270\n"); - - /* - * Only adjust if > 64M on current system - */ - if (node || (zone_size[0] <= sz)) - return; - - zone_size[1] = zone_size[0] - sz; - zone_size[0] = sz; - zhole_size[1] = zhole_size[0]; - zhole_size[0] = 0; - } -} - -static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - /* clear our parent irq */ - GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio); - - it8152_irq_demux(irq, desc); -} - -void __cmx270_pci_init_irq(int irq_gpio) -{ - it8152_init_irq(); - - cmx270_it8152_irq_gpio = irq_gpio; - - set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); - - set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); -} - -#ifdef CONFIG_PM -static unsigned long sleep_save_ite[10]; - -void __cmx270_pci_suspend(void) -{ - /* save ITE state */ - sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR); - sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR); - sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR); - - /* Clear ITE IRQ's */ - __raw_writel((0), IT8152_INTC_PDCNIRR); - __raw_writel((0), IT8152_INTC_LPCNIRR); -} - -void __cmx270_pci_resume(void) -{ - /* restore IT8152 state */ - __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR); - __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR); - __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR); -} -#else -void cmx270_pci_suspend(void) {} -void cmx270_pci_resume(void) {} -#endif - -/* PCI IRQ mapping*/ -static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin); - - irq = it8152_pci_map_irq(dev, slot, pin); - if (irq) - return irq; - - /* - Here comes the ugly part. The routing is baseboard specific, - but defining a platform for each possible base of CM-X270 is - unrealistic. Here we keep mapping for ATXBase and SB-X270. - */ - /* ATXBASE PCI slot */ - if (slot == 7) - return IT8152_PCI_INTA; - - /* ATXBase/SB-x270 CardBus */ - if (slot == 8 || slot == 0) - return IT8152_PCI_INTB; - - /* ATXBase Ethernet */ - if (slot == 9) - return IT8152_PCI_INTA; - - /* SB-x270 Ethernet */ - if (slot == 16) - return IT8152_PCI_INTA; - - /* PC104+ interrupt routing */ - if ((slot == 17) || (slot == 19)) - return IT8152_PCI_INTA; - if ((slot == 18) || (slot == 20)) - return IT8152_PCI_INTB; - - return(0); -} - -static void cmx270_pci_preinit(void) -{ - pr_info("Initializing CM-X270 PCI subsystem\n"); - - __raw_writel(0x800, IT8152_PCI_CFG_ADDR); - if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { - pr_info("PCI Bridge found.\n"); - - /* set PCI I/O base at 0 */ - writel(0x848, IT8152_PCI_CFG_ADDR); - writel(0, IT8152_PCI_CFG_DATA); - - /* set PCI memory base at 0 */ - writel(0x840, IT8152_PCI_CFG_ADDR); - writel(0, IT8152_PCI_CFG_DATA); - - writel(0x20, IT8152_GPIO_GPDR); - - /* CardBus Controller on ATXbase baseboard */ - writel(0x4000, IT8152_PCI_CFG_ADDR); - if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { - pr_info("CardBus Bridge found.\n"); - - /* Configure socket 0 */ - writel(0x408C, IT8152_PCI_CFG_ADDR); - writel(0x1022, IT8152_PCI_CFG_DATA); - - writel(0x4080, IT8152_PCI_CFG_ADDR); - writel(0x3844d060, IT8152_PCI_CFG_DATA); - - writel(0x4090, IT8152_PCI_CFG_ADDR); - writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | - 0x60440000), - IT8152_PCI_CFG_DATA); - - writel(0x4018, IT8152_PCI_CFG_ADDR); - writel(0xb0000000, IT8152_PCI_CFG_DATA); - - /* Configure socket 1 */ - writel(0x418C, IT8152_PCI_CFG_ADDR); - writel(0x1022, IT8152_PCI_CFG_DATA); - - writel(0x4180, IT8152_PCI_CFG_ADDR); - writel(0x3844d060, IT8152_PCI_CFG_DATA); - - writel(0x4190, IT8152_PCI_CFG_ADDR); - writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) | - 0x60440000), - IT8152_PCI_CFG_DATA); - - writel(0x4118, IT8152_PCI_CFG_ADDR); - writel(0xb0000000, IT8152_PCI_CFG_DATA); - } - } -} - -static struct hw_pci cmx270_pci __initdata = { - .swizzle = pci_std_swizzle, - .map_irq = cmx270_pci_map_irq, - .nr_controllers = 1, - .setup = it8152_pci_setup, - .scan = it8152_pci_scan_bus, - .preinit = cmx270_pci_preinit, -}; - -static int __init cmx270_init_pci(void) -{ - if (machine_is_armcore()) - pci_common_init(&cmx270_pci); - - return 0; -} - -subsys_initcall(cmx270_init_pci); |