5 files changed, 40 insertions, 18 deletions
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index bfb4fb1d738..88f08cab171 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -9,20 +9,15 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+
 #include <mach/hardware.h>
-#include <mach/io.h>
 #include <mach/irqs.h>
-#include <asm/hardware/gic.h>
 
- 		.macro	disable_fiq
-		.endm
+#include "../../iomap.h"
 
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
 		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index a3f6287b200..01e35fa106b 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -2,4 +2,40 @@
  * arch/arm/mach-omap1/include/mach/hardware.h
  */
 
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#ifndef __ASSEMBLER__
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+#include <plat/tc.h>
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0m_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif
+#endif
+
 #include <plat/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
deleted file mode 100644
index 57bdf74a3e6..00000000000
--- a/arch/arm/mach-omap1/include/mach/io.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/io.h
- */
-
-#include <plat/io.h>
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index c6337645ba8..901082def9b 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -18,7 +18,8 @@
  * Note that the is_lbus_device() test is not very efficient on 1510
  * because of the strncmp().
  */
-#ifdef CONFIG_ARCH_OMAP15XX
+#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
+#include <plat/cpu.h>
 
 /*
  * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
deleted file mode 100644
index a6c1b3a16df..00000000000
--- a/arch/arm/mach-omap1/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>