Diffstat (limited to 'Documentation/arm/SA1100/GraphicsMaster')
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster
new file mode 100644
@@ -0,0 +1,53 @@
+ADS GraphicsMaster Single Board Computer
+For more details, contact Applied Data Systems or see
+The original Linux support for this product has been provided by
+Nicolas Pitre <email@example.com>. Continued development work by
+Woojung Huh <firstname.lastname@example.org>
+Use 'make graphicsmaster_config' before any 'make config'.
+This will set up defaults for GraphicsMaster support.
+The kernel zImage is linked to be loaded and executed at 0xc0400000.
+Linux can be used with the ADS BootLoader that ships with the
+newer rev boards. See their documentation on how to load Linux.
+- SA1100 LCD frame buffer (8/16bpp...sort of)
+- SA1111 USB Master
+- on-board SMC 92C96 ethernet NIC
+- SA1100 serial port
+- flash memory access (MTD/JFFS)
+- pcmcia, compact flash
+- ps/2 keyboard
+- console on LCD screen
+- serial ports (ttyS[0-2])
+ - ttyS0 is default for serial console
+- Smart I/O (ADC, keypad, digital inputs, etc)
+ See http://www.applieddata.com/developers/linux for IOCTL documentation
+ and example user space code. ps/2 keybd is multiplexed through this driver
+- everything else! :-)
+- The flash on board is divided into 3 partitions. mtd0 is where
+ the zImage is stored. It's been marked as read-only to keep you
+ from blasting over the bootloader. :) mtd1 is
+ for the ramdisk.gz image. mtd2 is user flash space and can be
+ utilized for either JFFS or if you're feeling crazy, running ext2
+ on top of it. If you're not using the ADS bootloader, you're
+ welcome to blast over the mtd1 partition also.
+- 16bpp mode requires a different cable than what ships with the board.
+ Contact ADS or look through the manual to wire your own. Currently,
+ if you compile with 16bit mode support and switch into a lower bpp
+ mode, the timing is off so the image is corrupted. This will be
+ fixed soon.
+Any contribution can be sent to email@example.com and will be greatly welcome!