summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/x86/pci/common.c3
-rw-r--r--drivers/pci/pci-sysfs.c85
-rw-r--r--drivers/pci/pcie/portdrv_pci.c20
-rw-r--r--drivers/pci/quirks.c7
-rw-r--r--include/linux/pci_ids.h1
-rw-r--r--include/uapi/linux/pci_regs.h2
6 files changed, 63 insertions, 55 deletions
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 1b1dda90a94..412e1286d1f 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -434,7 +434,8 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
.callback = set_scan_all,
.ident = "Stratus/NEC ftServer",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "ftServer"),
+ DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
},
},
{}
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 05b78b16d20..9c6e9bb674e 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -422,77 +422,60 @@ static ssize_t sriov_numvfs_show(struct device *dev,
}
/*
- * num_vfs > 0; number of vfs to enable
- * num_vfs = 0; disable all vfs
+ * num_vfs > 0; number of VFs to enable
+ * num_vfs = 0; disable all VFs
*
* Note: SRIOV spec doesn't allow partial VF
- * disable, so its all or none.
+ * disable, so it's all or none.
*/
static ssize_t sriov_numvfs_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct pci_dev *pdev = to_pci_dev(dev);
- int num_vfs_enabled = 0;
- int num_vfs;
- int ret = 0;
- u16 total;
+ int ret;
+ u16 num_vfs;
- if (kstrtoint(buf, 0, &num_vfs) < 0)
- return -EINVAL;
+ ret = kstrtou16(buf, 0, &num_vfs);
+ if (ret < 0)
+ return ret;
+
+ if (num_vfs > pci_sriov_get_totalvfs(pdev))
+ return -ERANGE;
+
+ if (num_vfs == pdev->sriov->num_VFs)
+ return count; /* no change */
/* is PF driver loaded w/callback */
if (!pdev->driver || !pdev->driver->sriov_configure) {
- dev_info(&pdev->dev,
- "Driver doesn't support SRIOV configuration via sysfs\n");
+ dev_info(&pdev->dev, "Driver doesn't support SRIOV configuration via sysfs\n");
return -ENOSYS;
}
- /* if enabling vf's ... */
- total = pci_sriov_get_totalvfs(pdev);
- /* Requested VFs to enable < totalvfs and none enabled already */
- if ((num_vfs > 0) && (num_vfs <= total)) {
- if (pdev->sriov->num_VFs == 0) {
- num_vfs_enabled =
- pdev->driver->sriov_configure(pdev, num_vfs);
- if ((num_vfs_enabled >= 0) &&
- (num_vfs_enabled != num_vfs)) {
- dev_warn(&pdev->dev,
- "Only %d VFs enabled\n",
- num_vfs_enabled);
- return count;
- } else if (num_vfs_enabled < 0)
- /* error code from driver callback */
- return num_vfs_enabled;
- } else if (num_vfs == pdev->sriov->num_VFs) {
- dev_warn(&pdev->dev,
- "%d VFs already enabled; no enable action taken\n",
- num_vfs);
- return count;
- } else {
- dev_warn(&pdev->dev,
- "%d VFs already enabled. Disable before enabling %d VFs\n",
- pdev->sriov->num_VFs, num_vfs);
- return -EINVAL;
- }
+ if (num_vfs == 0) {
+ /* disable VFs */
+ ret = pdev->driver->sriov_configure(pdev, 0);
+ if (ret < 0)
+ return ret;
+ return count;
}
- /* disable vfs */
- if (num_vfs == 0) {
- if (pdev->sriov->num_VFs != 0) {
- ret = pdev->driver->sriov_configure(pdev, 0);
- return ret ? ret : count;
- } else {
- dev_warn(&pdev->dev,
- "All VFs disabled; no disable action taken\n");
- return count;
- }
+ /* enable VFs */
+ if (pdev->sriov->num_VFs) {
+ dev_warn(&pdev->dev, "%d VFs already enabled. Disable before enabling %d VFs\n",
+ pdev->sriov->num_VFs, num_vfs);
+ return -EBUSY;
}
- dev_err(&pdev->dev,
- "Invalid value for number of VFs to enable: %d\n", num_vfs);
+ ret = pdev->driver->sriov_configure(pdev, num_vfs);
+ if (ret < 0)
+ return ret;
- return -EINVAL;
+ if (ret != num_vfs)
+ dev_warn(&pdev->dev, "%d VFs requested; only %d enabled\n",
+ num_vfs, ret);
+
+ return count;
}
static struct device_attribute sriov_totalvfs_attr = __ATTR_RO(sriov_totalvfs);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index d4824cb78b4..08c243ab034 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -134,10 +134,28 @@ static int pcie_port_runtime_resume(struct device *dev)
return 0;
}
+static int pci_dev_pme_poll(struct pci_dev *pdev, void *data)
+{
+ bool *pme_poll = data;
+
+ if (pdev->pme_poll)
+ *pme_poll = true;
+ return 0;
+}
+
static int pcie_port_runtime_idle(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ bool pme_poll = false;
+
+ /*
+ * If any subordinate device needs pme poll, we should keep
+ * the port in D0, because we need port in D0 to poll it.
+ */
+ pci_walk_bus(pdev->subordinate, pci_dev_pme_poll, &pme_poll);
/* Delay for a short while to prevent too frequent suspend/resume */
- pm_schedule_suspend(dev, 10);
+ if (!pme_poll)
+ pm_schedule_suspend(dev, 10);
return -EBUSY;
}
#else
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 8f7a6344e79..0369fb6fc1d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2725,7 +2725,7 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
if (PCI_FUNC(dev->devfn))
return;
/*
- * RICOH 0xe823 SD/MMC card reader fails to recognize
+ * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize
* certain types of SD/MMC cards. Lowering the SD base
* clock frequency from 200Mhz to 50Mhz fixes this issue.
*
@@ -2736,7 +2736,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
* 0xf9 - Key register for 0x150
* 0xfc - key register for 0xe1
*/
- if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
+ if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 ||
+ dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
pci_write_config_byte(dev, 0xf9, 0xfc);
pci_write_config_byte(dev, 0x150, 0x10);
pci_write_config_byte(dev, 0xf9, 0x00);
@@ -2763,6 +2764,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 0f8447376dd..0eb65796bcb 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1568,6 +1568,7 @@
#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
#define PCI_DEVICE_ID_RICOH_R5C822 0x0822
+#define PCI_DEVICE_ID_RICOH_R5CE822 0xe822
#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823
#define PCI_DEVICE_ID_RICOH_R5C832 0x0832
#define PCI_DEVICE_ID_RICOH_R5C843 0x0843
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 6b7b6f1e2fd..ebfadc56d1b 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -458,6 +458,8 @@
#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
+#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */
+#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */
#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-23 15:07:34 +0000