diff options
189 files changed, 1113 insertions, 677 deletions
@@ -111,6 +111,7 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Uwe Kleine-König <ukl@pengutronix.de> Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Valdis Kletnieks <Valdis.Kletnieks@vt.edu> +Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com> Takashi YOSHII <takashi.yoshii.zj@renesas.com> Yusuke Goda <goda.yusuke@renesas.com> Gustavo Padovan <gustavo@las.ic.unicamp.br> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 5bc8a476c15..cfedf63cce1 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -219,6 +219,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale @@ -273,6 +274,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available What: /sys/.../iio:deviceX/in_voltageX_scale_available What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available What: /sys/.../iio:deviceX/out_voltageX_scale_available +What: /sys/.../iio:deviceX/out_altvoltageX_scale_available What: /sys/.../iio:deviceX/in_capacitance_scale_available KernelVersion: 2.635 Contact: linux-iio@vger.kernel.org @@ -298,14 +300,19 @@ Description: gives the 3dB frequency of the filter in Hz. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled, no bias etc.) output voltage for channel Y. The number must always be specified and unique if the output corresponds to a single channel. + While DAC like devices typically use out_voltage, + a continuous frequency generating device, such as + a DDS or PLL should use out_altvoltage. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -316,6 +323,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -330,6 +339,8 @@ Description: What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -338,6 +349,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -346,6 +359,24 @@ Description: normal operation. Y may be suppressed if all outputs are controlled together. +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Output frequency for channel Y in Hz. The number must always be + specified and unique if the output corresponds to a single + channel. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Phase in radians of one frequency/clock output Y + (out_altvoltageY) relative to another frequency/clock output + (out_altvoltageZ) of the device X. The number must always be + specified and unique if the output corresponds to a single + channel. + What: /sys/bus/iio/devices/iio:deviceX/events KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 57aae7765c7..65610bf52eb 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -60,4 +60,4 @@ Introduction Document Author --------------- - Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics + Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index 84d46c0c71a..c86b50c03ea 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -6,7 +6,9 @@ Supported chips: Prefix: 'coretemp' CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm), 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm), - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield) + 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield), + 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom), + 0x36 (Cedar Trail Atom) Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3A: System Programming Guide http://softwarecommunity.intel.com/Wiki/Mobility/720.htm @@ -52,6 +54,17 @@ Some information comes from ark.intel.com Process Processor TjMax(C) +22nm Core i5/i7 Processors + i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105 + i5 3427U, 3360M/3320M 105 + i7 3770/3770K 105 + i5 3570/3570K, 3550, 3470/3450 105 + i7 3770S 103 + i5 3570S/3550S, 3475S/3470S/3450S 103 + i7 3770T 94 + i5 3570T 94 + i5 3470T 91 + 32nm Core i3/i5/i7 Processors i7 660UM/640/620, 640LM/620, 620M, 610E 105 i5 540UM/520/430, 540M/520/450/430 105 @@ -65,6 +78,11 @@ Process Processor TjMax(C) U3400 105 P4505/P4500 90 +32nm Atom Processors + Z2460 90 + D2700/2550/2500 100 + N2850/2800/2650/2600 100 + 45nm Xeon Processors 5400 Quad-Core X5492, X5482, X5472, X5470, X5460, X5450 85 E5472, E5462, E5450/40/30/20/10/05 85 @@ -85,6 +103,8 @@ Process Processor TjMax(C) N475/470/455/450 100 N280/270 90 330/230 125 + E680/660/640/620 90 + E680T/660T/640T/620T 110 45nm Core2 Processors Solo ULV SU3500/3300 100 diff --git a/MAINTAINERS b/MAINTAINERS index 3e30a3afe2a..eb22272b211 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -579,7 +579,7 @@ F: drivers/net/appletalk/ F: net/appletalk/ ARASAN COMPACT FLASH PATA CONTROLLER -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> L: linux-ide@vger.kernel.org S: Maintained F: include/linux/pata_arasan_cf_data.h @@ -5296,7 +5296,7 @@ S: Maintained F: drivers/pinctrl/ PIN CONTROLLER - ST SPEAR -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -5873,7 +5873,7 @@ S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> S: Maintained F: include/linux/dw_dmac.h F: drivers/dma/dw_dmac_regs.h @@ -6021,7 +6021,7 @@ S: Maintained F: drivers/mmc/host/sdhci-s3c.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> L: spear-devel@list.st.com L: linux-mmc@vger.kernel.org S: Maintained @@ -6377,7 +6377,7 @@ S: Maintained F: include/linux/compiler.h SPEAR PLATFORM SUPPORT -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> M: Shiraz Hashim <shiraz.hashim@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6386,7 +6386,7 @@ S: Maintained F: arch/arm/plat-spear/ SPEAR13XX MACHINE SUPPORT -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> M: Shiraz Hashim <shiraz.hashim@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6395,7 +6395,7 @@ S: Maintained F: arch/arm/mach-spear13xx/ SPEAR3XX MACHINE SUPPORT -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> M: Shiraz Hashim <shiraz.hashim@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6406,7 +6406,7 @@ F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar <rajeev-dlh.kumar@st.com> M: Shiraz Hashim <shiraz.hashim@st.com> -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -6414,7 +6414,7 @@ S: Maintained F: arch/arm/mach-spear6xx/ SPEAR CLOCK FRAMEWORK SUPPORT -M: Viresh Kumar <viresh.kumar@st.com> +M: Viresh Kumar <viresh.linux@gmail.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -7421,7 +7421,7 @@ F: include/linux/vlynq.h VME SUBSYSTEM M: Martyn Welch <martyn.welch@ge.com> -M: Manohar Vanga <manohar.vanga@cern.ch> +M: Manohar Vanga <manohar.vanga@gmail.com> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: devel@driverdev.osuosl.org S: Maintained @@ -561,6 +561,8 @@ else KBUILD_CFLAGS += -O2 endif +include $(srctree)/arch/$(SRCARCH)/Makefile + ifdef CONFIG_READABLE_ASM # Disable optimizations that make assembler listings hard to read. # reorder blocks reorders the control in the function @@ -571,8 +573,6 @@ KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \ $(call cc-option,-fno-partial-inlining) endif -include $(srctree)/arch/$(SRCARCH)/Makefile - ifneq ($(CONFIG_FRAME_WARN),0) KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8314e417188..dd4358bc26e 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9e61da404d5..419ea7413d2 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 0d8472e5ab9..c9a54e06fb6 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index a26fc47a55e..d71fe2a68f0 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 1f8e1e1481d..10dcec7e732 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index fc82b1a2645..d71b8d581e3 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index 01c5e358fdb..ed3627c116c 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index dc5e2d445a9..b00544e0cd5 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index e47081c494d..62fc4fb3e5f 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 6308fa3bec1..c13fd1f3b09 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 5372ca399b1..1f49d69595a 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 91072553963..3a8bb573692 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 7be54690aee..e42cf597f6e 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -19,6 +19,7 @@ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ + " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ " .popsection" diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index e0d1c0cfa54..6b9b077d86b 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -4,7 +4,7 @@ * ARM PrimeXsys System Controller SP810 header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 437f0c42651..0d1851ca6eb 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -495,6 +495,7 @@ ENDPROC(__und_usr) * The out of line fixup for the ldrt above. */ .pushsection .fixup, "ax" + .align 2 4: mov pc, r9 .popsection .pushsection __ex_table,"a" diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 8f96ec778e8..6123daf397a 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = { /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */ /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */ /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */ - DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, + DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, REGS(PC, NOSPPCX, 0, 0, 0)), /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */ diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S index ea1564609bd..9e3ae6bfe50 100644 --- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h index 383ab04dc6c..d50bdb60592 100644 --- a/arch/arm/mach-spear13xx/include/mach/dma.h +++ b/arch/arm/mach-spear13xx/include/mach/dma.h @@ -4,7 +4,7 @@ * DMA information for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h index 6d8c45b9f29..dac57fd0cdf 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear13xx/include/mach/generic.h @@ -4,7 +4,7 @@ * spear13xx machine family generic header file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h index cd6f4f86a56..85f176311f6 100644 --- a/arch/arm/mach-spear13xx/include/mach/gpio.h +++ b/arch/arm/mach-spear13xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h index f542a24aa5f..271a62b4cd3 100644 --- a/arch/arm/mach-spear13xx/include/mach/irqs.h +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h index 30c57ef7268..65f27def239 100644 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ b/arch/arm/mach-spear13xx/include/mach/spear.h @@ -4,7 +4,7 @@ * spear13xx Machine family specific definition * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h index 31af3e8d976..3a58b8284a6 100644 --- a/arch/arm/mach-spear13xx/include/mach/timex.h +++ b/arch/arm/mach-spear13xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h index c7840896ae6..70fe72f05de 100644 --- a/arch/arm/mach-spear13xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index fefd15b2f38..732d29bc733 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -4,7 +4,7 @@ * SPEAr1310 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c index ee38cbc5686..81e4ed76ad0 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -4,7 +4,7 @@ * SPEAr1340 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index 50b349ae863..cf936b106e2 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -4,7 +4,7 @@ * SPEAr13XX machines common source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S index 590519f10d6..0a6381fad5d 100644 --- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 4a95b9453c2..ce19113ca79 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family generic header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h index 451b2081bfc..2ac74c6db7f 100644 --- a/arch/arm/mach-spear3xx/include/mach/gpio.h +++ b/arch/arm/mach-spear3xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 51bd62a0254..803de76f5f3 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 18e2ac576f2..6309bf68d6f 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 51eb953148a..8cca95193d4 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -4,7 +4,7 @@ * SPEAr3xx Machine family specific definition * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h index a38cc9de876..9f5d08bd0c4 100644 --- a/arch/arm/mach-spear3xx/include/mach/timex.h +++ b/arch/arm/mach-spear3xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h index 53ba8bbc0df..b909b011f7c 100644 --- a/arch/arm/mach-spear3xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f74a05bdb82..0f882ecb7d8 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -4,7 +4,7 @@ * SPEAr300 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 84dfb090074..bbcf4571d36 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -4,7 +4,7 @@ * SPEAr310 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index a88fa841d29..88d483bcd66 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -4,7 +4,7 @@ * SPEAr320 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f22419ed74a..0f41bd1c47c 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -4,7 +4,7 @@ * SPEAr3XX machines common source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h index 3a789dbb69f..d42cefc0356 100644 --- a/arch/arm/mach-spear6xx/include/mach/gpio.h +++ b/arch/arm/mach-spear6xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 179e45774b3..c34acc201d3 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9c74ac54584..1509a3cb583 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -580,43 +580,12 @@ static void ux500_uart0_reset(void) udelay(1); } -/* This needs to be referenced by callbacks */ -struct pinctrl *u0_p; -struct pinctrl_state *u0_def; -struct pinctrl_state *u0_sleep; - -static void ux500_uart0_init(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_def)) - return; - - ret = pinctrl_select_state(u0_p, u0_def); - if (ret) - pr_err("could not set UART0 defstate\n"); -} - -static void ux500_uart0_exit(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_sleep)) - return; - - ret = pinctrl_select_state(u0_p, u0_sleep); - if (ret) - pr_err("could not set UART0 idlestate\n"); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .init = ux500_uart0_init, - .exit = ux500_uart0_exit, .reset = ux500_uart0_reset, }; @@ -638,28 +607,7 @@ static struct amba_pl011_data uart2_plat = { static void __init mop500_uart_init(struct device *parent) { - struct amba_device *uart0_device; - - uart0_device = db8500_add_uart0(parent, &uart0_plat); - if (uart0_device) { - u0_p = pinctrl_get(&uart0_device->dev); - if (IS_ERR(u0_p)) - dev_err(&uart0_device->dev, - "could not get UART0 pinctrl\n"); - else { - u0_def = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(u0_def)) { - dev_err(&uart0_device->dev, - "could not get UART0 defstate\n"); - } - u0_sleep = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(u0_sleep)) - dev_err(&uart0_device->dev, - "could not get UART0 idlestate\n"); - } - } + db8500_add_uart0(parent, &uart0_plat); db8500_add_uart1(parent, &uart1_plat); db8500_add_uart2(parent, &uart2_plat); } diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 62135849f48..c641fb68501 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -762,6 +762,11 @@ b_epilogue: update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; + case BPF_S_ANC_ALU_XOR_X: + /* A ^= X */ + update_on_xread(ctx); + emit(ARM_EOR_R(r_A, r_A, r_X), ctx); + break; case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 99ae5e3f46d..7fa2f7d3cb9 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -68,6 +68,8 @@ #define ARM_INST_CMP_R 0x01500000 #define ARM_INST_CMP_I 0x03500000 +#define ARM_INST_EOR_R 0x00200000 + #define ARM_INST_LDRB_I 0x05d00000 #define ARM_INST_LDRB_R 0x07d00000 #define ARM_INST_LDRH_I 0x01d000b0 @@ -132,6 +134,8 @@ #define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm) #define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) +#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm) + #define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ | (off)) #define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \ diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 58b79809d20..584c9bf8ed2 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = { { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, { "pxa168-ssp", PXA168_SSP }, + { "pxa910-ssp", PXA910_SSP }, { }, }; diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index ab3de721c5d..75b05ad0fba 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header for spear platform * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index e14a3e4932f..2bc6b54460a 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h index 03ed8b585dc..88a7fbd2479 100644 --- a/arch/arm/plat-spear/include/plat/shirq.h +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h index 914d09dd50f..ef95e5b780b 100644 --- a/arch/arm/plat-spear/include/plat/timex.h +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -4,7 +4,7 @@ * SPEAr platform specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 6dd455bafdf..2ce6cb17a98 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index a56a067717c..12cf27f935f 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index ea0a61302b7..4f990115b1b 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -4,7 +4,7 @@ * SPEAr platform specific restart functions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c index 961fb726124..853e891e118 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/arch/arm/plat-spear/shirq.c @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer source file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c index 68d651081bd..d0b1607f271 100644 --- a/arch/h8300/kernel/setup.c +++ b/arch/h8300/kernel/setup.c @@ -35,6 +35,7 @@ #include <asm/setup.h> #include <asm/irq.h> #include <asm/pgtable.h> +#include <asm/sections.h> #if defined(__H8300H__) #define CPU "H8/300H" @@ -54,7 +55,6 @@ unsigned long memory_end; char __initdata command_line[COMMAND_LINE_SIZE]; -extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; extern char _target_name[]; extern void h8300_gpio_init(void); @@ -119,9 +119,9 @@ void __init setup_arch(char **cmdline_p) memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; #endif - init_mm.start_code = (unsigned long) &_stext; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; + init_mm.start_code = (unsigned long) _stext; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) 0; #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT) @@ -134,15 +134,12 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n"); #ifdef DEBUG - printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " - "STACK=0x%06x-0x%06x\n", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end, - (int) memory_end, (int) &_ramend); + printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p " + "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start, + __bss_stop); + printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx " + "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start, + memory_end, memory_end, &_ramend); #endif #ifdef CONFIG_DEFAULT_CMDLINE diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index 973369c32a9..981e25094b1 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -36,6 +36,7 @@ #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/sections.h> #undef DEBUG @@ -123,7 +124,6 @@ void __init mem_init(void) int codek = 0, datak = 0, initk = 0; /* DAVIDM look at setup memory map generically with reserved area */ unsigned long tmp; - extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; extern unsigned long _ramend, _ramstart; unsigned long len = &_ramend - &_ramstart; unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ @@ -142,9 +142,9 @@ void __init mem_init(void) /* this will put all memory onto the freelists */ totalram_pages = free_all_bootmem(); - codek = (&_etext - &_stext) >> 10; - datak = (&_ebss - &_sdata) >> 10; - initk = (&__init_begin - &__init_end) >> 10; + codek = (_etext - _stext) >> 10; + datak = (__bss_stop - _sdata) >> 10; + initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n", @@ -178,22 +178,21 @@ free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; - extern char __init_begin, __init_end; /* * the following code should be cool even if these sections * are not page aligned. */ - addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + addr = PAGE_ALIGN((unsigned long)(__init_begin)); /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (addr - PAGE_ALIGN((long) __init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long)__init_begin)), (int)(addr - PAGE_SIZE)); #endif } diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 36f957f3184..8733a86ad52 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -68,9 +68,7 @@ static const char *pseries_nvram_os_partitions[] = { }; static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len); + enum kmsg_dump_reason reason); static struct kmsg_dumper nvram_kmsg_dumper = { .dump = oops_to_nvram @@ -504,28 +502,6 @@ int __init pSeries_nvram_init(void) } /* - * Try to capture the last capture_len bytes of the printk buffer. Return - * the amount actually captured. - */ -static size_t capture_last_msgs(const char *old_msgs, size_t old_len, - const char *new_msgs, size_t new_len, - char *captured, size_t capture_len) -{ - if (new_len >= capture_len) { - memcpy(captured, new_msgs + (new_len - capture_len), - capture_len); - return capture_len; - } else { - /* Grab the end of old_msgs. */ - size_t old_tail_len = min(old_len, capture_len - new_len); - memcpy(captured, old_msgs + (old_len - old_tail_len), - old_tail_len); - memcpy(captured + old_tail_len, new_msgs, new_len); - return old_tail_len + new_len; - } -} - -/* * Are we using the ibm,rtas-log for oops/panic reports? And if so, * would logging this oops/panic overwrite an RTAS event that rtas_errd * hasn't had a chance to read and process? Return 1 if so, else 0. @@ -541,27 +517,6 @@ static int clobbering_unread_rtas_event(void) NVRAM_RTAS_READ_TIMEOUT); } -/* Squeeze out each line's <n> severity prefix. */ -static size_t elide_severities(char *buf, size_t len) -{ - char *in, *out, *buf_end = buf + len; - /* Assume a <n> at the very beginning marks the start of a line. */ - int newline = 1; - - in = out = buf; - while (in < buf_end) { - if (newline && in+3 <= buf_end && - *in == '<' && isdigit(in[1]) && in[2] == '>') { - in += 3; - newline = 0; - } else { - newline = (*in == '\n'); - *out++ = *in++; - } - } - return out - buf; -} - /* Derived from logfs_compress() */ static int nvram_compress(const void *in, void *out, size_t inlen, size_t outlen) @@ -619,9 +574,7 @@ static int zip_oops(size_t text_len) * partition. If that's too much, go back and capture uncompressed text. */ static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len) + enum kmsg_dump_reason reason) { static unsigned int oops_count = 0; static bool panicking = false; @@ -660,14 +613,14 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, return; if (big_oops_buf) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, big_oops_buf, big_oops_buf_sz); - text_len = elide_severities(big_oops_buf, text_len); + kmsg_dump_get_buffer(dumper, false, + big_oops_buf, big_oops_buf_sz, &text_len); rc = zip_oops(text_len); } if (rc != 0) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, oops_data, oops_data_sz); + kmsg_dump_rewind(dumper); + kmsg_dump_get_buffer(dumper, true, + oops_data, oops_data_sz, &text_len); err_type = ERR_TYPE_KERNEL_PANIC; *oops_len = (u16) text_len; } diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h index 43876f16caf..cb00ccc7d57 100644 --- a/arch/x86/include/asm/pgtable-3level.h +++ b/arch/x86/include/asm/pgtable-3level.h @@ -47,16 +47,26 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte) * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd * operations. * - * Without THP if the mmap_sem is hold for reading, the - * pmd can only transition from null to not null while pmd_read_atomic runs. - * So there's no need of literally reading it atomically. + * Without THP if the mmap_sem is hold for reading, the pmd can only + * transition from null to not null while pmd_read_atomic runs. So + * we can always return atomic pmd values with this function. * * With THP if the mmap_sem is hold for reading, the pmd can become - * THP or null or point to a pte (and in turn become "stable") at any - * time under pmd_read_atomic, so it's mandatory to read it atomically - * with cmpxchg8b. + * trans_huge or none or point to a pte (and in turn become "stable") + * at any time under pmd_read_atomic. We could read it really + * atomically here with a atomic64_read for the THP enabled case (and + * it would be a whole lot simpler), but to avoid using cmpxchg8b we + * only return an atomic pmdval if the low part of the pmdval is later + * found stable (i.e. pointing to a pte). And we're returning a none + * pmdval if the low part of the pmd is none. In some cases the high + * and low part of the pmdval returned may not be consistent if THP is + * enabled (the low part may point to previously mapped hugepage, + * while the high part may point to a more recently mapped hugepage), + * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part + * of the pmd to be read atomically to decide if the pmd is unstable + * or not, with the only exception of when the low part of the pmd is + * zero in which case we return a none pmd. */ -#ifndef CONFIG_TRANSPARENT_HUGEPAGE static inline pmd_t pmd_read_atomic(pmd_t *pmdp) { pmdval_t ret; @@ -74,12 +84,6 @@ static inline pmd_t pmd_read_atomic(pmd_t *pmdp) return (pmd_t) { ret }; } -#else /* CONFIG_TRANSPARENT_HUGEPAGE */ -static inline pmd_t pmd_read_atomic(pmd_t *pmdp) -{ - return (pmd_t) { atomic64_read((atomic64_t *)pmdp) }; -} -#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte) { diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c index 3c6e328483c..028454f0c3a 100644 --- a/arch/x86/platform/mrst/early_printk_mrst.c +++ b/arch/x86/platform/mrst/early_printk_mrst.c @@ -110,19 +110,16 @@ static struct kmsg_dumper dw_dumper; static int dumper_registered; static void dw_kmsg_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) + enum kmsg_dump_reason reason) { - int i; + static char line[1024]; + size_t len; /* When run to this, we'd better re-init the HW */ mrst_early_console_init(); - for (i = 0; i < l1; i++) - early_mrst_console.write(&early_mrst_console, s1 + i, 1); - for (i = 0; i < l2; i++) - early_mrst_console.write(&early_mrst_console, s2 + i, 1); + while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len)) + early_mrst_console.write(&early_mrst_console, line, len); } /* Set the ratio rate to 115200, 8n1, IRQ disabled */ diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 7608559de93..f973754ddf9 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -68,8 +68,8 @@ endif # Only build variant and/or platform if it includes a Makefile -buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) -buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) +buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) +buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) # Find libgcc.a diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 88ecea3facb..ee2e2089483 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -83,7 +83,6 @@ SECTIONS _text = .; _stext = .; - _ftext = .; .text : { @@ -112,7 +111,7 @@ SECTIONS EXCEPTION_TABLE(16) /* Data section */ - _fdata = .; + _sdata = .; RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE) _edata = .; diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index ba150e5de2e..db955179da2 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -26,11 +26,7 @@ #include <asm/bootparam.h> #include <asm/page.h> - -/* References to section boundaries */ - -extern char _ftext, _etext, _fdata, _edata, _rodata_end; -extern char __init_begin, __init_end; +#include <asm/sections.h> /* * mem_reserve(start, end, must_exist) @@ -197,9 +193,9 @@ void __init mem_init(void) reservedpages++; } - codesize = (unsigned long) &_etext - (unsigned long) &_ftext; - datasize = (unsigned long) &_edata - (unsigned long) &_fdata; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + codesize = (unsigned long) _etext - (unsigned long) _stext; + datasize = (unsigned long) _edata - (unsigned long) _sdata; + initsize = (unsigned long) __init_end - (unsigned long) __init_begin; printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, " "%ldk data, %ldk init %ldk highmem)\n", @@ -237,7 +233,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) void free_initmem(void) { - free_reserved_mem(&__init_begin, &__init_end); - printk("Freeing unused kernel memory: %dk freed\n", - (&__init_end - &__init_begin) >> 10); + free_reserved_mem(__init_begin, __init_end); + printk("Freeing unused kernel memory: %zuk freed\n", + (__init_end - __init_begin) >> 10); } diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 3239517f4d9..ac6a5beb28f 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -4,7 +4,7 @@ * Arasan Compact Flash host controller source file * * Copyright (C) 2011 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -959,7 +959,7 @@ static struct platform_driver arasan_cf_driver = { module_platform_driver(arasan_cf_driver); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_DESCRIPTION("Arasan ATA Compact Flash driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 1b1cbb571d3..dcb8a6e4869 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -100,7 +100,7 @@ static void driver_deferred_probe_add(struct device *dev) mutex_lock(&deferred_probe_mutex); if (list_empty(&dev->p->deferred_probe)) { dev_dbg(dev, "Added to deferred list\n"); - list_add(&dev->p->deferred_probe, &deferred_probe_pending_list); + list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list); } mutex_unlock(&deferred_probe_mutex); } diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c index 6289f0eee24..731c9046cf7 100644 --- a/drivers/char/hw_random/atmel-rng.c +++ b/drivers/char/hw_random/atmel-rng.c @@ -34,7 +34,7 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max, u32 *data = buf; /* data ready? */ - if (readl(trng->base + TRNG_ODATA) & 1) { + if (readl(trng->base + TRNG_ISR) & 1) { *data = readl(trng->base + TRNG_ODATA); /* ensure data ready is only set again AFTER the next data diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c index af34074e702..6756e7c3bc0 100644 --- a/drivers/clk/spear/clk-aux-synth.c +++ b/drivers/clk/spear/clk-aux-synth.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c index 4dbdb3fe18e..958aa3ad1d6 100644 --- a/drivers/clk/spear/clk-frac-synth.c +++ b/drivers/clk/spear/clk-frac-synth.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c index b471c9762a9..1afc18c4eff 100644 --- a/drivers/clk/spear/clk-gpt-synth.c +++ b/drivers/clk/spear/clk-gpt-synth.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c index dcd4bdf4b0d..5f1b6badeb1 100644 --- a/drivers/clk/spear/clk-vco-pll.c +++ b/drivers/clk/spear/clk-vco-pll.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c index 376d4e5ff32..7cd63788d54 100644 --- a/drivers/clk/spear/clk.c +++ b/drivers/clk/spear/clk.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h index 3321c46a071..931737677df 100644 --- a/drivers/clk/spear/clk.h +++ b/drivers/clk/spear/clk.h @@ -2,7 +2,7 @@ * Clock framework definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 42b68df9aee..8f05652d53e 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -4,7 +4,7 @@ * SPEAr1310 machine clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index f130919d5bf..e3ea7216223 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -4,7 +4,7 @@ * SPEAr1340 machine clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 440bb3e4c97..01dd6daff2a 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -2,7 +2,7 @@ * SPEAr3xx machines clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index f9a20b38230..554d64b062a 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -2,7 +2,7 @@ * SPEAr6xx machines clock framework source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index e23dc82d43a..72129615757 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -1626,4 +1626,4 @@ module_exit(dw_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver"); MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index fb4f4990f5e..1dc2a4ad002 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -815,8 +815,6 @@ static int sdma_request_channel(struct sdma_channel *sdmac) init_completion(&sdmac->done); - sdmac->buf_tail = 0; - return 0; out: @@ -927,6 +925,8 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg( sdmac->flags = 0; + sdmac->buf_tail = 0; + dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n", sg_len, channel); @@ -1027,6 +1027,8 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( sdmac->status = DMA_IN_PROGRESS; + sdmac->buf_tail = 0; + sdmac->flags |= IMX_DMA_SG_LOOP; sdmac->direction = direction; ret = sdma_load_context(sdmac); diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index cbcc28e79be..e4feba6b03c 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -392,6 +392,8 @@ struct pl330_req { struct pl330_reqcfg *cfg; /* Pointer to first xfer in the request. */ struct pl330_xfer *x; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; }; /* @@ -461,8 +463,6 @@ struct _pl330_req { /* Number of bytes taken to setup MC for the req */ u32 mc_len; struct pl330_req *r; - /* Hook to attach to DMAC's list of reqs with due callback */ - struct list_head rqd; }; /* ToBeDone for tasklet */ @@ -1683,7 +1683,7 @@ static void pl330_dotask(unsigned long data) /* Returns 1 if state was updated, 0 otherwise */ static int pl330_update(const struct pl330_info *pi) { - struct _pl330_req *rqdone; + struct pl330_req *rqdone, *tmp; struct pl330_dmac *pl330; unsigned long flags; void __iomem *regs; @@ -1750,7 +1750,10 @@ static int pl330_update(const struct pl330_info *pi) if (active == -1) /* Aborted */ continue; - rqdone = &thrd->req[active]; + /* Detach the req */ + rqdone = thrd->req[active].r; + thrd->req[active].r = NULL; + mark_free(thrd, active); /* Get going again ASAP */ @@ -1762,20 +1765,11 @@ static int pl330_update(const struct pl330_info *pi) } /* Now that we are in no hurry, do the callbacks */ - while (!list_empty(&pl330->req_done)) { - struct pl330_req *r; - - rqdone = container_of(pl330->req_done.next, - struct _pl330_req, rqd); - - list_del_init(&rqdone->rqd); - - /* Detach the req */ - r = rqdone->r; - rqdone->r = NULL; + list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) { + list_del(&rqdone->rqd); spin_unlock_irqrestore(&pl330->lock, flags); - _callback(r, PL330_ERR_NONE); + _callback(rqdone, PL330_ERR_NONE); spin_lock_irqsave(&pl330->lock, flags); } @@ -2321,7 +2315,7 @@ static void pl330_tasklet(unsigned long data) /* Pick up ripe tomatoes */ list_for_each_entry_safe(desc, _dt, &pch->work_list, node) if (desc->status == DONE) { - if (pch->cyclic) + if (!pch->cyclic) dma_cookie_complete(&desc->txd); list_move_tail(&desc->node, &list); } @@ -2539,7 +2533,7 @@ static inline void _init_desc(struct dma_pl330_desc *desc) } /* Returns the number of descriptors added to the DMAC pool */ -int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count) +static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count) { struct dma_pl330_desc *desc; unsigned long flags; diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 10f375032e9..de5ba86e8b8 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -164,7 +164,7 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) else return (char *)ptr; - r = size % align; + r = (unsigned long)p % align; if (r == 0) return (char *)ptr; diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index d27778f65a5..a499c7ed820 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -1814,12 +1814,6 @@ static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val, if (mce->bank != 8) return NOTIFY_DONE; -#ifdef CONFIG_SMP - /* Only handle if it is the right mc controller */ - if (mce->socketid != pvt->i7core_dev->socket) - return NOTIFY_DONE; -#endif - smp_rmb(); if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) { smp_wmb(); @@ -2116,8 +2110,6 @@ static void i7core_unregister_mci(struct i7core_dev *i7core_dev) if (pvt->enable_scrub) disable_sdram_scrub_setting(mci); - mce_unregister_decode_chain(&i7_mce_dec); - /* Disable EDAC polling */ i7core_pci_ctl_release(pvt); @@ -2222,8 +2214,6 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev) /* DCLK for scrub rate setting */ pvt->dclk_freq = get_dclk_freq(); - mce_register_decode_chain(&i7_mce_dec); - return 0; fail0: @@ -2367,8 +2357,10 @@ static int __init i7core_init(void) pci_rc = pci_register_driver(&i7core_driver); - if (pci_rc >= 0) + if (pci_rc >= 0) { + mce_register_decode_chain(&i7_mce_dec); return 0; + } i7core_printk(KERN_ERR, "Failed to register device with error %d.\n", pci_rc); @@ -2384,6 +2376,7 @@ static void __exit i7core_exit(void) { debugf2("MC: " __FILE__ ": %s()\n", __func__); pci_unregister_driver(&i7core_driver); + mce_unregister_decode_chain(&i7_mce_dec); } module_init(i7core_init); diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 4c402353ba9..0e374625f6f 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -980,7 +980,8 @@ static int __devinit mpc85xx_mc_err_probe(struct platform_device *op) layers[1].type = EDAC_MC_LAYER_CHANNEL; layers[1].size = 1; layers[1].is_virt_csrow = false; - mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), sizeof(*pdata)); + mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers, + sizeof(*pdata)); if (!mci) { devres_release_group(&op->dev, mpc85xx_mc_err_probe); return -ENOMEM; diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index 4adaf4b7da9..36ad17e79d6 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -555,7 +555,7 @@ static int get_dimm_config(struct mem_ctl_info *mci) pvt->is_close_pg = false; } - pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®); + pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, ®); if (IS_RDIMM_ENABLED(reg)) { /* FIXME: Can also be LRDIMM */ debugf0("Memory is registered\n"); @@ -1604,8 +1604,6 @@ static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev) debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n", __func__, mci, &sbridge_dev->pdev[0]->dev); - mce_unregister_decode_chain(&sbridge_mce_dec); - /* Remove MC sysfs nodes */ edac_mc_del_mc(mci->dev); @@ -1682,7 +1680,6 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev) goto fail0; } - mce_register_decode_chain(&sbridge_mce_dec); return 0; fail0: @@ -1811,8 +1808,10 @@ static int __init sbridge_init(void) pci_rc = pci_register_driver(&sbridge_driver); - if (pci_rc >= 0) + if (pci_rc >= 0) { + mce_register_decode_chain(&sbridge_mce_dec); return 0; + } sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n", pci_rc); @@ -1828,6 +1827,7 @@ static void __exit sbridge_exit(void) { debugf2("MC: " __FILE__ ": %s()\n", __func__); pci_unregister_driver(&sbridge_driver); + mce_unregister_decode_chain(&sbridge_mce_dec); } module_init(sbridge_init); diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 23416e44376..a4ed30bd9a4 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -116,8 +116,8 @@ const char *max8997_extcon_cable[] = { [5] = "Charge-downstream", [6] = "MHL", [7] = "Dock-desk", - [7] = "Dock-card", - [8] = "JIG", + [8] = "Dock-card", + [9] = "JIG", NULL, }; @@ -514,6 +514,7 @@ static int __devexit max8997_muic_remove(struct platform_device *pdev) extcon_dev_unregister(info->edev); + kfree(info->edev); kfree(info); return 0; diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c index f598a700ec1..159aeb07b3b 100644 --- a/drivers/extcon/extcon_class.c +++ b/drivers/extcon/extcon_class.c @@ -762,7 +762,7 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev) #if defined(CONFIG_ANDROID) if (switch_class) ret = class_compat_create_link(switch_class, edev->dev, - dev); + NULL); #endif /* CONFIG_ANDROID */ spin_lock_init(&edev->lock); diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c index fe7a07b4733..8a0dcc11c7c 100644 --- a/drivers/extcon/extcon_gpio.c +++ b/drivers/extcon/extcon_gpio.c @@ -125,6 +125,7 @@ static int __devinit gpio_extcon_probe(struct platform_device *pdev) if (ret < 0) goto err_request_irq; + platform_set_drvdata(pdev, extcon_data); /* Perform initial detection */ gpio_extcon_work(&extcon_data->work.work); @@ -146,6 +147,7 @@ static int __devexit gpio_extcon_remove(struct platform_device *pdev) struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev); cancel_delayed_work_sync(&extcon_data->work); + free_irq(extcon_data->irq, extcon_data); gpio_free(extcon_data->gpio); extcon_dev_unregister(&extcon_data->edev); devm_kfree(&pdev->dev, extcon_data); diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index f082e48ab11..70d62f5bc90 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -215,7 +215,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) int i; if (send_command(cmd) || send_argument(key)) { - pr_warn("%s: read arg fail\n", key); + pr_warn("%.4s: read arg fail\n", key); return -EIO; } @@ -223,7 +223,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) for (i = 0; i < len; i++) { if (__wait_status(0x05)) { - pr_warn("%s: read data fail\n", key); + pr_warn("%.4s: read data fail\n", key); return -EIO; } buffer[i] = inb(APPLESMC_DATA_PORT); diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index b9d512331ed..7f1feb2f467 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -191,6 +191,24 @@ static ssize_t show_temp(struct device *dev, return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN; } +struct tjmax { + char const *id; + int tjmax; +}; + +static struct tjmax __cpuinitconst tjmax_table[] = { + { "CPU D410", 100000 }, + { "CPU D425", 100000 }, + { "CPU D510", 100000 }, + { "CPU D525", 100000 }, + { "CPU N450", 100000 }, + { "CPU N455", 100000 }, + { "CPU N470", 100000 }, + { "CPU N475", 100000 }, + { "CPU 230", 100000 }, + { "CPU 330", 125000 }, +}; + static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) { @@ -202,6 +220,13 @@ static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, int err; u32 eax, edx; struct pci_dev *host_bridge; + int i; + + /* explicit tjmax table entries override heuristics */ + for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) { + if (strstr(c->x86_model_id, tjmax_table[i].id)) + return tjmax_table[i].tjmax; + } /* Early chips have no MSR for TjMax */ @@ -210,7 +235,8 @@ static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, /* Atom CPUs */ - if (c->x86_model == 0x1c) { + if (c->x86_model == 0x1c || c->x86_model == 0x26 + || c->x86_model == 0x27) { usemsr_ee = 0; host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); @@ -223,6 +249,9 @@ static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, tjmax = 90000; pci_dev_put(host_bridge); + } else if (c->x86_model == 0x36) { + usemsr_ee = 0; + tjmax = 100000; } if (c->x86_model > 0xe && usemsr_ee) { @@ -772,7 +801,7 @@ MODULE_DEVICE_TABLE(x86cpu, coretemp_ids); static int __init coretemp_init(void) { - int i, err = -ENODEV; + int i, err; /* * CPUID.06H.EAX[0] indicates whether the CPU has thermal diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c index 9691f664c76..e7d234b5931 100644 --- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -451,11 +451,15 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da, data->fan_rpm_control = true; break; default: - mutex_unlock(&data->update_lock); - return -EINVAL; + count = -EINVAL; + goto err; } - read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg); + result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg); + if (result) { + count = result; + goto err; + } if (data->fan_rpm_control) conf_reg |= 0x80; @@ -463,7 +467,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da, conf_reg &= ~0x80; i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg); - +err: mutex_unlock(&data->update_lock); return count; } diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 56eecefcec7..2ec93da41e2 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -8,8 +8,7 @@ menuconfig IIO help The industrial I/O subsystem provides a unified framework for drivers for many different types of embedded sensors using a - number of different physical interfaces (i2c, spi, etc). See - Documentation/iio for more information. + number of different physical interfaces (i2c, spi, etc). if IIO diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 1ddd8861c71..4f947e4377e 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -661,7 +661,6 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev) * New channel registration method - relies on the fact a group does * not need to be initialized if it is name is NULL. */ - INIT_LIST_HEAD(&indio_dev->channel_attr_list); if (indio_dev->channels) for (i = 0; i < indio_dev->num_channels; i++) { ret = iio_device_add_channel_sysfs(indio_dev, @@ -725,12 +724,16 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev) static void iio_dev_release(struct device *device) { struct iio_dev *indio_dev = dev_to_iio_dev(device); - cdev_del(&indio_dev->chrdev); + if (indio_dev->chrdev.dev) + cdev_del(&indio_dev->chrdev); if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) iio_device_unregister_trigger_consumer(indio_dev); iio_device_unregister_eventset(indio_dev); iio_device_unregister_sysfs(indio_dev); iio_device_unregister_debugfs(indio_dev); + + ida_simple_remove(&iio_ida, indio_dev->id); + kfree(indio_dev); } static struct device_type iio_dev_type = { @@ -761,6 +764,7 @@ struct iio_dev *iio_device_alloc(int sizeof_priv) dev_set_drvdata(&dev->dev, (void *)dev); mutex_init(&dev->mlock); mutex_init(&dev->info_exist_lock); + INIT_LIST_HEAD(&dev->channel_attr_list); dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL); if (dev->id < 0) { @@ -778,10 +782,8 @@ EXPORT_SYMBOL(iio_device_alloc); void iio_device_free(struct iio_dev *dev) { - if (dev) { - ida_simple_remove(&iio_ida, dev->id); - kfree(dev); - } + if (dev) + put_device(&dev->dev); } EXPORT_SYMBOL(iio_device_free); @@ -902,7 +904,7 @@ void iio_device_unregister(struct iio_dev *indio_dev) mutex_lock(&indio_dev->info_exist_lock); indio_dev->info = NULL; mutex_unlock(&indio_dev->info_exist_lock); - device_unregister(&indio_dev->dev); + device_del(&indio_dev->dev); } EXPORT_SYMBOL(iio_device_unregister); subsys_initcall(iio_init); diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index af2d9086d7e..c370c2d87c1 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -29,6 +29,7 @@ #include <linux/ioport.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/slab.h> #include <linux/uaccess.h> #include <linux/isa.h> #include <asm/io.h> diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index 373f423b118..947a06a1845 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -6,7 +6,7 @@ * * License Terms: GNU General Public License, version 2 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics + * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics */ #include <linux/i2c.h> diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c index afd459013ec..9edfe864cc0 100644 --- a/drivers/mfd/stmpe-spi.c +++ b/drivers/mfd/stmpe-spi.c @@ -4,7 +4,7 @@ * Copyright (C) ST Microelectronics SA 2011 * * License Terms: GNU General Public License, version 2 - * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics + * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics */ #include <linux/spi/spi.h> @@ -146,4 +146,4 @@ module_exit(stmpe_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver"); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 93936f1b75e..23f5463d4ca 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -835,7 +835,7 @@ static int _mei_irq_thread_read(struct mei_device *dev, s32 *slots, struct mei_cl *cl, struct mei_io_list *cmpl_list) { - if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) + + if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) + sizeof(struct hbm_flow_control))) { /* return the cancel routine */ list_del(&cb_pos->cb_list); diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index c7033322833..7de13891e49 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -982,7 +982,7 @@ static int __devinit mei_probe(struct pci_dev *pdev, err = request_threaded_irq(pdev->irq, NULL, mei_interrupt_thread_handler, - 0, mei_driver_name, dev); + IRQF_ONESHOT, mei_driver_name, dev); else err = request_threaded_irq(pdev->irq, mei_interrupt_quick_handler, @@ -992,7 +992,7 @@ static int __devinit mei_probe(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n", pdev->irq); - goto unmap_memory; + goto disable_msi; } INIT_DELAYED_WORK(&dev->timer_work, mei_timer); if (mei_hw_init(dev)) { @@ -1023,8 +1023,8 @@ release_irq: mei_disable_interrupts(dev); flush_scheduled_work(); free_irq(pdev->irq, dev); +disable_msi: pci_disable_msi(pdev); -unmap_memory: pci_iounmap(pdev, dev->mem_addr); free_device: kfree(dev); @@ -1101,6 +1101,8 @@ static void __devexit mei_remove(struct pci_dev *pdev) pci_release_regions(pdev); pci_disable_device(pdev); + + misc_deregister(&mei_misc_device); } #ifdef CONFIG_PM static int mei_pci_suspend(struct device *device) @@ -1216,7 +1218,6 @@ module_init(mei_init_module); */ static void __exit mei_exit_module(void) { - misc_deregister(&mei_misc_device); pci_unregister_driver(&mei_driver); pr_debug("unloaded successfully.\n"); diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c index 6be5605707b..e2ec0505eb5 100644 --- a/drivers/misc/mei/wd.c +++ b/drivers/misc/mei/wd.c @@ -341,7 +341,7 @@ static const struct watchdog_ops wd_ops = { }; static const struct watchdog_info wd_info = { .identity = INTEL_AMT_WATCHDOG_ID, - .options = WDIOF_KEEPALIVEPING, + .options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY, }; static struct watchdog_device amt_wd_dev = { diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2d4a4b74675..258b203397a 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1326,7 +1326,7 @@ static int mmc_suspend(struct mmc_host *host) if (!err) mmc_card_set_sleep(host->card); } else if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); + err = mmc_deselect_cards(host); host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); mmc_release_host(host); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index c272c6868ec..b2b43f624b9 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1075,16 +1075,18 @@ static void mmc_sd_detect(struct mmc_host *host) */ static int mmc_sd_suspend(struct mmc_host *host) { + int err = 0; + BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); + err = mmc_deselect_cards(host); host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_release_host(host); - return 0; + return err; } /* diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 13d0e95380a..41c5fd8848f 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -218,6 +218,12 @@ static int sdio_enable_wide(struct mmc_card *card) if (ret) return ret; + if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED) + pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", + mmc_hostname(card->host), ctrl); + + /* set as 4-bit bus width */ + ctrl &= ~SDIO_BUS_WIDTH_MASK; ctrl |= SDIO_BUS_WIDTH_4BIT; ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index 787aba1682b..ab56f7db531 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -140,4 +140,18 @@ #define atmci_writel(port,reg,value) \ __raw_writel((value), (port)->regs + reg) +/* + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + * + * This can be done by finding most significant bit set. + */ +static inline unsigned int atmci_convert_chksize(unsigned int maxburst) +{ + if (maxburst > 1) + return fls(maxburst) - 2; + else + return 0; +} + #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 420aca642b1..f2c115e0643 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -910,6 +910,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) enum dma_data_direction direction; enum dma_transfer_direction slave_dirn; unsigned int sglen; + u32 maxburst; u32 iflags; data->error = -EINPROGRESS; @@ -943,17 +944,18 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (!chan) return -ENODEV; - if (host->caps.has_dma) - atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN); - if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; + maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); } else { direction = DMA_TO_DEVICE; host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; + maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); } + atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN); + sglen = dma_map_sg(chan->device->dev, data->sg, data->sg_len, direction); @@ -2314,6 +2316,8 @@ static int __init atmci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); + setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); + /* We need at least one slot to succeed */ nr_slots = 0; ret = -ENODEV; @@ -2352,8 +2356,6 @@ static int __init atmci_probe(struct platform_device *pdev) } } - setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); - dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 9bbf45f8c53..1ca5e72ceb6 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -418,6 +418,8 @@ static int dw_mci_idmac_init(struct dw_mci *host) p->des3 = host->sg_dma; p->des0 = IDMAC_DES0_ER; + mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET); + /* Mask out interrupts - get Tx & Rx complete only */ mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI); @@ -615,14 +617,15 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) u32 div; if (slot->clock != host->current_speed) { - if (host->bus_hz % slot->clock) + div = host->bus_hz / slot->clock; + if (host->bus_hz % slot->clock && host->bus_hz > slot->clock) /* * move the + 1 after the divide to prevent * over-clocking the card. */ - div = ((host->bus_hz / slot->clock) >> 1) + 1; - else - div = (host->bus_hz / slot->clock) >> 1; + div += 1; + + div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0; dev_info(&slot->mmc->class_dev, "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ" @@ -939,8 +942,8 @@ static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd mdelay(20); if (cmd->data) { - host->data = NULL; dw_mci_stop_dma(host); + host->data = NULL; } } } @@ -1623,7 +1626,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI); mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); - set_bit(EVENT_DATA_COMPLETE, &host->pending_events); host->dma_ops->complete(host); } #endif @@ -1725,7 +1727,8 @@ static void dw_mci_work_routine_card(struct work_struct *work) #ifdef CONFIG_MMC_DW_IDMAC ctrl = mci_readl(host, BMOD); - ctrl |= 0x01; /* Software reset of DMA */ + /* Software reset of DMA */ + ctrl |= SDMMC_IDMAC_SWRESET; mci_writel(host, BMOD, ctrl); #endif @@ -1950,10 +1953,6 @@ int dw_mci_probe(struct dw_mci *host) spin_lock_init(&host->lock); INIT_LIST_HEAD(&host->queue); - - host->dma_ops = host->pdata->dma_ops; - dw_mci_init_dma(host); - /* * Get the host data width - this assumes that HCON has been set with * the correct values. @@ -1981,10 +1980,11 @@ int dw_mci_probe(struct dw_mci *host) } /* Reset all blocks */ - if (!mci_wait_reset(&host->dev, host)) { - ret = -ENODEV; - goto err_dmaunmap; - } + if (!mci_wait_reset(&host->dev, host)) + return -ENODEV; + + host->dma_ops = host->pdata->dma_ops; + dw_mci_init_dma(host); /* Clear the interrupts for the host controller */ mci_writel(host, RINTSTS, 0xFFFFFFFF); @@ -2170,14 +2170,14 @@ int dw_mci_resume(struct dw_mci *host) if (host->vmmc) regulator_enable(host->vmmc); - if (host->dma_ops->init) - host->dma_ops->init(host); - if (!mci_wait_reset(&host->dev, host)) { ret = -ENODEV; return ret; } + if (host->dma_ops->init) + host->dma_ops->init(host); + /* Restore the old value at FIFOTH register */ mci_writel(host, FIFOTH, host->fifoth_val); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index f0fcce40cd8..50ff19a6236 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1216,12 +1216,7 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np, int bus_width = 0; pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0); - if (!pdata->gpio_wp) - pdata->gpio_wp = -1; - pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0); - if (!pdata->gpio_cd) - pdata->gpio_cd = -1; if (of_get_property(np, "cd-inverted", NULL)) pdata->cd_invert = true; @@ -1276,6 +1271,12 @@ static int __devinit mmci_probe(struct amba_device *dev, return -EINVAL; } + if (!plat) { + plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + } + if (np) mmci_dt_populate_generic_pdata(np, plat); @@ -1424,6 +1425,10 @@ static int __devinit mmci_probe(struct amba_device *dev, writel(0, host->base + MMCIMASK1); writel(0xfff, host->base + MMCICLEAR); + if (plat->gpio_cd == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_cd; + } if (gpio_is_valid(plat->gpio_cd)) { ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)"); if (ret == 0) @@ -1447,6 +1452,10 @@ static int __devinit mmci_probe(struct amba_device *dev, if (ret >= 0) host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } + if (plat->gpio_wp == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio_wp; + } if (gpio_is_valid(plat->gpio_wp)) { ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)"); if (ret == 0) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 34a90266ab1..277161d279b 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -894,8 +894,8 @@ static struct platform_driver mxs_mmc_driver = { .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &mxs_mmc_pm_ops, - .of_match_table = mxs_mmc_dt_ids, #endif + .of_match_table = mxs_mmc_dt_ids, }, }; diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 552196c764d..3e8dcf8d2e0 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1300,7 +1300,7 @@ static const struct mmc_host_ops mmc_omap_ops = { .set_ios = mmc_omap_set_ios, }; -static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) +static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id) { struct mmc_omap_slot *slot = NULL; struct mmc_host *mmc; @@ -1485,24 +1485,26 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) } host->nr_slots = pdata->nr_slots; + host->reg_shift = (cpu_is_omap7xx() ? 1 : 2); + + host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); + if (!host->mmc_omap_wq) + goto err_plat_cleanup; + for (i = 0; i < pdata->nr_slots; i++) { ret = mmc_omap_new_slot(host, i); if (ret < 0) { while (--i >= 0) mmc_omap_remove_slot(host->slots[i]); - goto err_plat_cleanup; + goto err_destroy_wq; } } - host->reg_shift = (cpu_is_omap7xx() ? 1 : 2); - - host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); - if (!host->mmc_omap_wq) - goto err_plat_cleanup; - return 0; +err_destroy_wq: + destroy_workqueue(host->mmc_omap_wq); err_plat_cleanup: if (pdata->cleanup) pdata->cleanup(&pdev->dev); diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 55a164fcaa1..a50c205ea20 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -404,7 +404,7 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc) if (sc->ext_cd_irq && request_threaded_irq(sc->ext_cd_irq, NULL, sdhci_s3c_gpio_card_detect_thread, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, dev_name(dev), sc) == 0) { int status = gpio_get_value(sc->ext_cd_gpio); if (pdata->ext_cd_gpio_invert) diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 1fe32dfa7cd..423da8194cd 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -4,7 +4,7 @@ * Support of SDHCI platform devices for spear soc family * * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * Inspired by sdhci-pltfm.c * @@ -289,5 +289,5 @@ static struct platform_driver sdhci_driver = { module_platform_driver(sdhci_driver); MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index e626732aff7..f4b8b4db3a9 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -680,8 +680,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) } if (count >= 0xF) { - pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n", - mmc_hostname(host->mmc), count, cmd->opcode); + DBG("%s: Too large timeout 0x%x requested for CMD%d!\n", + mmc_hostname(host->mmc), count, cmd->opcode); count = 0xE; } diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index ae36d7e1e91..551e316e445 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -304,32 +304,17 @@ static void find_next_position(struct mtdoops_context *cxt) } static void mtdoops_do_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, const char *s1, unsigned long l1, - const char *s2, unsigned long l2) + enum kmsg_dump_reason reason) { struct mtdoops_context *cxt = container_of(dumper, struct mtdoops_context, dump); - unsigned long s1_start, s2_start; - unsigned long l1_cpy, l2_cpy; - char *dst; - - if (reason != KMSG_DUMP_OOPS && - reason != KMSG_DUMP_PANIC) - return; /* Only dump oopses if dump_oops is set */ if (reason == KMSG_DUMP_OOPS && !dump_oops) return; - dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */ - l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE); - l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy); - - s2_start = l2 - l2_cpy; - s1_start = l1 - l1_cpy; - - memcpy(dst, s1 + s1_start, l1_cpy); - memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy); + kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE, + record_size - MTDOOPS_HEADER_SIZE, NULL); /* Panics must be written immediately */ if (reason != KMSG_DUMP_OOPS) @@ -375,6 +360,7 @@ static void mtdoops_notify_add(struct mtd_info *mtd) return; } + cxt->dump.max_reason = KMSG_DUMP_OOPS; cxt->dump.dump = mtdoops_do_dump; err = kmsg_dump_register(&cxt->dump); if (err) { diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c index afb50ee6459..4ba4636b6a4 100644 --- a/drivers/pinctrl/pinctrl-mxs.c +++ b/drivers/pinctrl/pinctrl-mxs.c @@ -137,7 +137,7 @@ static int mxs_dt_node_to_map(struct pinctrl_dev *pctldev, free_group: if (!purecfg) - free(group); + kfree(group); free: kfree(new_map); return ret; diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index e8937e7e499..3e7e47d6b38 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1438,7 +1438,27 @@ static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function, dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins); - /* Handle this special glitch on altfunction C */ + /* + * If we're setting altfunc C by setting both AFSLA and AFSLB to 1, + * we may pass through an undesired state. In this case we take + * some extra care. + * + * Safe sequence used to switch IOs between GPIO and Alternate-C mode: + * - Save SLPM registers (since we have a shadow register in the + * nmk_chip we're using that as backup) + * - Set SLPM=0 for the IOs you want to switch and others to 1 + * - Configure the GPIO registers for the IOs that are being switched + * - Set IOFORCE=1 + * - Modify the AFLSA/B registers for the IOs that are being switched + * - Set IOFORCE=0 + * - Restore SLPM registers + * - Any spurious wake up event during switch sequence to be ignored + * and cleared + * + * We REALLY need to save ALL slpm registers, because the external + * IOFORCE will switch *all* ports to their sleepmode setting to as + * to avoid glitches. (Not just one port!) + */ glitch = (g->altsetting == NMK_GPIO_ALT_C); if (glitch) { diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c index 5ae50aadf88..b3f6b2873fd 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.c +++ b/drivers/pinctrl/spear/pinctrl-spear.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * Inspired from: * - U300 Pinctl drivers diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h index 9155783bb47..d950eb78d93 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.h +++ b/drivers/pinctrl/spear/pinctrl-spear.h @@ -2,7 +2,7 @@ * Driver header file for the ST Microelectronics SPEAr pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c index fff168be7f0..d6cca8c81b9 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1310.c +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr1310 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -2192,7 +2192,7 @@ static void __exit spear1310_pinctrl_exit(void) } module_exit(spear1310_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c index a8ab2a6f51b..a0eb057e55b 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1340.c +++ b/drivers/pinctrl/spear/pinctrl-spear1340.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr1340 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -1983,7 +1983,7 @@ static void __exit spear1340_pinctrl_exit(void) } module_exit(spear1340_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c index 9c82a35e4e7..4dfc2849b17 100644 --- a/drivers/pinctrl/spear/pinctrl-spear300.c +++ b/drivers/pinctrl/spear/pinctrl-spear300.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr300 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -702,7 +702,7 @@ static void __exit spear300_pinctrl_exit(void) } module_exit(spear300_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear310.c b/drivers/pinctrl/spear/pinctrl-spear310.c index 1a970760512..96883693fb7 100644 --- a/drivers/pinctrl/spear/pinctrl-spear310.c +++ b/drivers/pinctrl/spear/pinctrl-spear310.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr310 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -425,7 +425,7 @@ static void __exit spear310_pinctrl_exit(void) } module_exit(spear310_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c index de726e6c283..020b1e0bdb3 100644 --- a/drivers/pinctrl/spear/pinctrl-spear320.c +++ b/drivers/pinctrl/spear/pinctrl-spear320.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr320 pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -3462,7 +3462,7 @@ static void __exit spear320_pinctrl_exit(void) } module_exit(spear320_pinctrl_exit); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c index 91c883bc46a..0242378f7cb 100644 --- a/drivers/pinctrl/spear/pinctrl-spear3xx.c +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c @@ -2,7 +2,7 @@ * Driver for the ST Microelectronics SPEAr3xx pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.h b/drivers/pinctrl/spear/pinctrl-spear3xx.h index 5d5fdd8df7b..31f44347f17 100644 --- a/drivers/pinctrl/spear/pinctrl-spear3xx.h +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.h @@ -2,7 +2,7 @@ * Header file for the ST Microelectronics SPEAr3xx pinmux * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index e1b8c54ace5..a739f5ca936 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -794,17 +794,17 @@ static __devinit int ab8500_regulator_register(struct platform_device *pdev, } static struct of_regulator_match ab8500_regulator_matches[] = { - { .name = "LDO-AUX1", .driver_data = (void *) AB8500_LDO_AUX1, }, - { .name = "LDO-AUX2", .driver_data = (void *) AB8500_LDO_AUX2, }, - { .name = "LDO-AUX3", .driver_data = (void *) AB8500_LDO_AUX3, }, - { .name = "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, }, - { .name = "LDO-TVOUT", .driver_data = (void *) AB8500_LDO_TVOUT, }, - { .name = "LDO-USB", .driver_data = (void *) AB8500_LDO_USB, }, - { .name = "LDO-AUDIO", .driver_data = (void *) AB8500_LDO_AUDIO, }, - { .name = "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, }, - { .name = "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, }, - { .name = "LDO-DMIC", .driver_data = (void *) AB8500_LDO_DMIC, }, - { .name = "LDO-ANA", .driver_data = (void *) AB8500_LDO_ANA, }, + { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, }, + { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, }, + { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, }, + { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, }, + { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, }, + { .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, }, + { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, }, + { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, }, + { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, }, + { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, }, + { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, }, }; static __devinit int diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c index 968f97f3cb3..9dbb491b6ef 100644 --- a/drivers/regulator/db8500-prcmu.c +++ b/drivers/regulator/db8500-prcmu.c @@ -452,26 +452,26 @@ static __devinit int db8500_regulator_register(struct platform_device *pdev, } static struct of_regulator_match db8500_regulator_matches[] = { - { .name = "db8500-vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, }, - { .name = "db8500-varm", .driver_data = (void *) DB8500_REGULATOR_VARM, }, - { .name = "db8500-vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, }, - { .name = "db8500-vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, }, - { .name = "db8500-vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, }, - { .name = "db8500-vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, }, - { .name = "db8500-vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, }, - { .name = "db8500-vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, }, - { .name = "db8500-sva-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, }, - { .name = "db8500-sva-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, }, - { .name = "db8500-sva-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, }, - { .name = "db8500-sia-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, }, - { .name = "db8500-sia-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, }, - { .name = "db8500-sia-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, }, - { .name = "db8500-sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, }, - { .name = "db8500-b2r2-mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, }, - { .name = "db8500-esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, }, - { .name = "db8500-esram12-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, }, - { .name = "db8500-esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, }, - { .name = "db8500-esram34-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, }, + { .name = "db8500_vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, }, + { .name = "db8500_varm", .driver_data = (void *) DB8500_REGULATOR_VARM, }, + { .name = "db8500_vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, }, + { .name = "db8500_vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, }, + { .name = "db8500_vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, }, + { .name = "db8500_vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, }, + { .name = "db8500_vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, }, + { .name = "db8500_vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, }, + { .name = "db8500_sva_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, }, + { .name = "db8500_sva_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, }, + { .name = "db8500_sva_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, }, + { .name = "db8500_sia_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, }, + { .name = "db8500_sia_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, }, + { .name = "db8500_sia_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, }, + { .name = "db8500_sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, }, + { .name = "db8500_b2r2_mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, }, + { .name = "db8500_esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, }, + { .name = "db8500_esram12_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, }, + { .name = "db8500_esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, }, + { .name = "db8500_esram34_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, }, }; static __devinit int diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 290d6fc0102..9caadb48217 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -451,7 +451,7 @@ static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev, desc = reg_voltage_map[reg_id]; - if (old_sel < new_sel) + if ((old_sel < new_sel) && s5m8767->ramp_delay) return DIV_ROUND_UP(desc->step * (new_sel - old_sel), s5m8767->ramp_delay * 1000); return 0; diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index 69425c4e86f..de138e30d3e 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -182,7 +182,7 @@ static int __devinit omap_rproc_probe(struct platform_device *pdev) ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (ret) { - dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret); + dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret); return ret; } diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 8ea7bccc710..66324ee4678 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -247,7 +247,7 @@ rproc_load_segments(struct rproc *rproc, const u8 *elf_data, size_t len) } if (offset + filesz > len) { - dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n", + dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n", offset + filesz, len); ret = -EINVAL; break; @@ -934,7 +934,7 @@ static void rproc_resource_cleanup(struct rproc *rproc) unmapped = iommu_unmap(rproc->domain, entry->da, entry->len); if (unmapped != entry->len) { /* nothing much to do besides complaining */ - dev_err(dev, "failed to unmap %u/%u\n", entry->len, + dev_err(dev, "failed to unmap %u/%zu\n", entry->len, unmapped); } @@ -1020,7 +1020,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) ehdr = (struct elf32_hdr *)fw->data; - dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size); + dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size); /* * if enabling an IOMMU isn't relevant for this rproc, this is @@ -1041,8 +1041,10 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) /* look for the resource table */ table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz); - if (!table) + if (!table) { + ret = -EINVAL; goto clean_up; + } /* handle fw resources which are required to boot rproc */ ret = rproc_handle_boot_rsc(rproc, table, tablesz); diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 46ef5fe51db..0c73dd4f43a 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -801,7 +801,7 @@ static int omap2_mcspi_setup(struct spi_device *spi) mcspi_dma = &mcspi->dma_channels[spi->chip_select]; if (!cs) { - cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL); + cs = kzalloc(sizeof *cs, GFP_KERNEL); if (!cs) return -ENOMEM; cs->base = mcspi->base + spi->chip_select * 0x14; @@ -842,6 +842,7 @@ static void omap2_mcspi_cleanup(struct spi_device *spi) cs = spi->controller_state; list_del(&cs->node); + kfree(cs); } if (spi->chip_select < spi->master->num_chipselect) { diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index 1c3d6386ea3..aeac1caba3f 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -30,6 +30,7 @@ #include <linux/pci.h> #include <linux/usb.h> #include <linux/errno.h> +#include <linux/kconfig.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/fcntl.h> @@ -981,6 +982,8 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver, } EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister); +#if IS_ENABLED(CONFIG_USB) + static int comedi_old_usb_auto_config(struct usb_interface *intf, struct comedi_driver *driver) { @@ -1043,3 +1046,5 @@ void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver, comedi_driver_unregister(comedi_driver); } EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister); + +#endif diff --git a/drivers/staging/gdm72xx/netlink_k.c b/drivers/staging/gdm72xx/netlink_k.c index 292af0f7f45..51665132c61 100644 --- a/drivers/staging/gdm72xx/netlink_k.c +++ b/drivers/staging/gdm72xx/netlink_k.c @@ -104,7 +104,7 @@ struct sock *netlink_init(int unit, void (*cb)(struct net_device *dev, u16 type, void netlink_exit(struct sock *sock) { - sock_release(sock->sk_socket); + netlink_kernel_release(sock); } int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len) diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt index 0338c7cd0a8..f03fbd3bb45 100644 --- a/drivers/staging/iio/Documentation/device.txt +++ b/drivers/staging/iio/Documentation/device.txt @@ -29,8 +29,6 @@ Then fill in the following: * info->driver_module: Set to THIS_MODULE. Used to ensure correct ownership of various resources allocate by the core. - * info->num_interrupt_lines: - Number of event triggering hardware lines the device has. * info->event_attrs: Attributes used to enable / disable hardware events. * info->attrs: diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 2490dd25093..8f1b3af02f2 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -13,6 +13,7 @@ config AD7291 config AD7298 tristate "Analog Devices AD7298 ADC driver" depends on SPI + select IIO_KFIFO_BUF if IIO_BUFFER help Say yes here to build support for Analog Devices AD7298 8 Channel ADC with temperature sensor. diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c index 10ab6dc823b..a13afff2dfe 100644 --- a/drivers/staging/iio/adc/ad7606_core.c +++ b/drivers/staging/iio/adc/ad7606_core.c @@ -235,7 +235,8 @@ static const struct attribute_group ad7606_attribute_group_range = { .indexed = 1, \ .channel = num, \ .address = num, \ - .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .scan_index = num, \ .scan_type = IIO_ST('s', 16, 16, 0), \ } diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c index 11acd4c35ed..8c6ed3b0c6f 100644 --- a/drivers/staging/omapdrm/omap_fbdev.c +++ b/drivers/staging/omapdrm/omap_fbdev.c @@ -208,7 +208,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper, */ ret = omap_gem_get_paddr(fbdev->bo, &paddr, true); if (ret) { - dev_err(dev->dev, "could not map (paddr)!\n"); + dev_err(dev->dev, + "could not map (paddr)! Skipping framebuffer alloc\n"); ret = -ENOMEM; goto fail; } @@ -388,8 +389,11 @@ void omap_fbdev_free(struct drm_device *dev) fbi = helper->fbdev; - unregister_framebuffer(fbi); - framebuffer_release(fbi); + /* only cleanup framebuffer if it is present */ + if (fbi) { + unregister_framebuffer(fbi); + framebuffer_release(fbi); + } drm_fb_helper_fini(helper); diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index 9bd18e2d051..69f616c6964 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -102,6 +102,8 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { /* - */ {USB_DEVICE(0x20F4, 0x646B)}, {USB_DEVICE(0x083A, 0xC512)}, + {USB_DEVICE(0x25D4, 0x4CA1)}, + {USB_DEVICE(0x25D4, 0x4CAB)}, /* RTL8191SU */ /* Realtek */ diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 47d061b9ad4..6e1958a325b 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -3113,7 +3113,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * /** * serial8250_register_8250_port - register a serial port - * @port: serial port template + * @up: serial port template * * Configure the serial port specified by the request. If the * port exists and is in use, it is hung up and unregistered diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4ad721fb840..c17923ec6e9 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -133,6 +133,10 @@ struct pl011_dmatx_data { struct uart_amba_port { struct uart_port port; struct clk *clk; + /* Two optional pin states - default & sleep */ + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_sleep; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ @@ -1312,6 +1316,14 @@ static int pl011_startup(struct uart_port *port) unsigned int cr; int retval; + /* Optionaly enable pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (retval) + dev_err(port->dev, + "could not set default pins\n"); + } + retval = clk_prepare(uap->clk); if (retval) goto out; @@ -1420,6 +1432,7 @@ static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; + int retval; /* * disable all interrupts @@ -1462,6 +1475,14 @@ static void pl011_shutdown(struct uart_port *port) */ clk_disable(uap->clk); clk_unprepare(uap->clk); + /* Optionally let pins go into sleep states */ + if (!IS_ERR(uap->pins_sleep)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep); + if (retval) + dev_err(port->dev, + "could not set pins to sleep state\n"); + } + if (uap->port.dev->platform_data) { struct amba_pl011_data *plat; @@ -1792,6 +1813,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + /* Allow pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + ret = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (ret) + dev_err(uap->port.dev, + "could not set default pins\n"); + } + ret = clk_prepare(uap->clk); if (ret) return ret; @@ -1844,7 +1873,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; struct vendor_data *vendor = id->data; - struct pinctrl *pinctrl; void __iomem *base; int i, ret; @@ -1869,11 +1897,20 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto free; } - pinctrl = devm_pinctrl_get_select_default(&dev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); + uap->pinctrl = devm_pinctrl_get(&dev->dev); + if (IS_ERR(uap->pinctrl)) { + ret = PTR_ERR(uap->pinctrl); goto unmap; } + uap->pins_default = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(uap->pins_default)) + dev_err(&dev->dev, "could not get default pinstate\n"); + + uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_SLEEP); + if (IS_ERR(uap->pins_sleep)) + dev_dbg(&dev->dev, "could not get sleep pinstate\n"); uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 34bd345da77..6ae2a58d62f 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -466,7 +466,7 @@ static void serial_txx9_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL) /* * Wait for transmitter & holding register to empty */ diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c index afcd1367654..e4841c36798 100644 --- a/drivers/watchdog/sp805_wdt.c +++ b/drivers/watchdog/sp805_wdt.c @@ -4,7 +4,7 @@ * Watchdog driver for ARM SP805 watchdog module * * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2 or later. This program is licensed "as is" without any @@ -331,6 +331,6 @@ static struct amba_driver sp805_wdt_driver = { module_amba_driver(sp805_wdt_driver); -MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); +MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>"); MODULE_DESCRIPTION("ARM SP805 Watchdog Driver"); MODULE_LICENSE("GPL"); diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 8f7d1237b7a..7301cdb4b2c 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -179,61 +179,74 @@ static int __add_prelim_ref(struct list_head *head, u64 root_id, static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path, struct ulist *parents, int level, - struct btrfs_key *key, u64 time_seq, + struct btrfs_key *key_for_search, u64 time_seq, u64 wanted_disk_byte, const u64 *extent_item_pos) { - int ret; - int slot = path->slots[level]; - struct extent_buffer *eb = path->nodes[level]; + int ret = 0; + int slot; + struct extent_buffer *eb; + struct btrfs_key key; struct btrfs_file_extent_item *fi; struct extent_inode_elem *eie = NULL; u64 disk_byte; - u64 wanted_objectid = key->objectid; -add_parent: - if (level == 0 && extent_item_pos) { - fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item); - ret = check_extent_in_eb(key, eb, fi, *extent_item_pos, &eie); + if (level != 0) { + eb = path->nodes[level]; + ret = ulist_add(parents, eb->start, 0, GFP_NOFS); if (ret < 0) return ret; - } - ret = ulist_add(parents, eb->start, (unsigned long)eie, GFP_NOFS); - if (ret < 0) - return ret; - - if (level != 0) return 0; + } /* - * if the current leaf is full with EXTENT_DATA items, we must - * check the next one if that holds a reference as well. - * ref->count cannot be used to skip this check. - * repeat this until we don't find any additional EXTENT_DATA items. + * We normally enter this function with the path already pointing to + * the first item to check. But sometimes, we may enter it with + * slot==nritems. In that case, go to the next leaf before we continue. */ - while (1) { - eie = NULL; + if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) ret = btrfs_next_old_leaf(root, path, time_seq); - if (ret < 0) - return ret; - if (ret) - return 0; + while (!ret) { eb = path->nodes[0]; - for (slot = 0; slot < btrfs_header_nritems(eb); ++slot) { - btrfs_item_key_to_cpu(eb, key, slot); - if (key->objectid != wanted_objectid || - key->type != BTRFS_EXTENT_DATA_KEY) - return 0; - fi = btrfs_item_ptr(eb, slot, - struct btrfs_file_extent_item); - disk_byte = btrfs_file_extent_disk_bytenr(eb, fi); - if (disk_byte == wanted_disk_byte) - goto add_parent; + slot = path->slots[0]; + + btrfs_item_key_to_cpu(eb, &key, slot); + + if (key.objectid != key_for_search->objectid || + key.type != BTRFS_EXTENT_DATA_KEY) + break; + + fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item); + disk_byte = btrfs_file_extent_disk_bytenr(eb, fi); + + if (disk_byte == wanted_disk_byte) { + eie = NULL; + if (extent_item_pos) { + ret = check_extent_in_eb(&key, eb, fi, + *extent_item_pos, + &eie); + if (ret < 0) + break; + } + if (!ret) { + ret = ulist_add(parents, eb->start, + (unsigned long)eie, GFP_NOFS); + if (ret < 0) + break; + if (!extent_item_pos) { + ret = btrfs_next_old_leaf(root, path, + time_seq); + continue; + } + } } + ret = btrfs_next_old_item(root, path, time_seq); } - return 0; + if (ret > 0) + ret = 0; + return ret; } /* @@ -250,7 +263,6 @@ static int __resolve_indirect_ref(struct btrfs_fs_info *fs_info, struct btrfs_path *path; struct btrfs_root *root; struct btrfs_key root_key; - struct btrfs_key key = {0}; struct extent_buffer *eb; int ret = 0; int root_level; @@ -295,11 +307,9 @@ static int __resolve_indirect_ref(struct btrfs_fs_info *fs_info, goto out; } - if (level == 0) - btrfs_item_key_to_cpu(eb, &key, path->slots[0]); - - ret = add_all_parents(root, path, parents, level, &key, time_seq, - ref->wanted_disk_byte, extent_item_pos); + ret = add_all_parents(root, path, parents, level, &ref->key_for_search, + time_seq, ref->wanted_disk_byte, + extent_item_pos); out: btrfs_free_path(path); return ret; diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8b73b2d4deb..fa5c45b3907 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2755,13 +2755,18 @@ static inline int btrfs_insert_empty_item(struct btrfs_trans_handle *trans, int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path); int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path, u64 time_seq); -static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p) +static inline int btrfs_next_old_item(struct btrfs_root *root, + struct btrfs_path *p, u64 time_seq) { ++p->slots[0]; if (p->slots[0] >= btrfs_header_nritems(p->nodes[0])) - return btrfs_next_leaf(root, p); + return btrfs_next_old_leaf(root, p, time_seq); return 0; } +static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p) +{ + return btrfs_next_old_item(root, p, 0); +} int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path); int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf); int __must_check btrfs_drop_snapshot(struct btrfs_root *root, diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e1890b1d307..7b845ff4af9 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3426,6 +3426,7 @@ int btrfs_destroy_delayed_refs(struct btrfs_transaction *trans, mutex_unlock(&head->mutex); btrfs_put_delayed_ref(ref); + spin_lock(&delayed_refs->lock); continue; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a4f02501da4..d8bb0dbc494 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -987,7 +987,7 @@ static noinline void async_cow_start(struct btrfs_work *work) async_cow->start, async_cow->end, async_cow, &num_added); if (num_added == 0) { - iput(async_cow->inode); + btrfs_add_delayed_iput(async_cow->inode); async_cow->inode = NULL; } } @@ -1023,7 +1023,7 @@ static noinline void async_cow_free(struct btrfs_work *work) struct async_cow *async_cow; async_cow = container_of(work, struct async_cow, work); if (async_cow->inode) - iput(async_cow->inode); + btrfs_add_delayed_iput(async_cow->inode); kfree(async_cow); } diff --git a/fs/exec.c b/fs/exec.c index a79786a8d2c..da27b91ff1e 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -819,10 +819,10 @@ static int exec_mmap(struct mm_struct *mm) /* Notify parent that we're no longer interested in the old VM */ tsk = current; old_mm = current->mm; - sync_mm_rss(old_mm); mm_release(tsk, old_mm); if (old_mm) { + sync_mm_rss(old_mm); /* * Make sure that if there is a core dump in progress * for the old mm, we get out and die instead of going diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c index 08a07a218d2..57ceaf33d17 100644 --- a/fs/nilfs2/gcinode.c +++ b/fs/nilfs2/gcinode.c @@ -191,6 +191,8 @@ void nilfs_remove_all_gcinodes(struct the_nilfs *nilfs) while (!list_empty(head)) { ii = list_first_entry(head, struct nilfs_inode_info, i_dirty); list_del_init(&ii->i_dirty); + truncate_inode_pages(&ii->vfs_inode.i_data, 0); + nilfs_btnode_cache_clear(&ii->i_btnode_cache); iput(&ii->vfs_inode); } } diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index 0e72ad6f22a..88e11fb346b 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2309,6 +2309,8 @@ nilfs_remove_written_gcinodes(struct the_nilfs *nilfs, struct list_head *head) if (!test_bit(NILFS_I_UPDATED, &ii->i_state)) continue; list_del_init(&ii->i_dirty); + truncate_inode_pages(&ii->vfs_inode.i_data, 0); + nilfs_btnode_cache_clear(&ii->i_btnode_cache); iput(&ii->vfs_inode); } } diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c index aeb19e68e08..11a2aa2a56c 100644 --- a/fs/pstore/inode.c +++ b/fs/pstore/inode.c @@ -258,7 +258,7 @@ fail: return rc; } -int pstore_fill_super(struct super_block *sb, void *data, int silent) +static int pstore_fill_super(struct super_block *sb, void *data, int silent) { struct inode *inode; diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c index 82c585f715e..03ce7a9b81c 100644 --- a/fs/pstore/platform.c +++ b/fs/pstore/platform.c @@ -94,20 +94,15 @@ static const char *get_reason_str(enum kmsg_dump_reason reason) * as we can from the end of the buffer. */ static void pstore_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) + enum kmsg_dump_reason reason) { - unsigned long s1_start, s2_start; - unsigned long l1_cpy, l2_cpy; - unsigned long size, total = 0; - char *dst; + unsigned long total = 0; const char *why; u64 id; - int hsize, ret; unsigned int part = 1; unsigned long flags = 0; int is_locked = 0; + int ret; why = get_reason_str(reason); @@ -119,30 +114,25 @@ static void pstore_dump(struct kmsg_dumper *dumper, spin_lock_irqsave(&psinfo->buf_lock, flags); oopscount++; while (total < kmsg_bytes) { + char *dst; + unsigned long size; + int hsize; + size_t len; + dst = psinfo->buf; hsize = sprintf(dst, "%s#%d Part%d\n", why, oopscount, part); size = psinfo->bufsize - hsize; dst += hsize; - l2_cpy = min(l2, size); - l1_cpy = min(l1, size - l2_cpy); - - if (l1_cpy + l2_cpy == 0) + if (!kmsg_dump_get_buffer(dumper, true, dst, size, &len)) break; - s2_start = l2 - l2_cpy; - s1_start = l1 - l1_cpy; - - memcpy(dst, s1 + s1_start, l1_cpy); - memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy); - ret = psinfo->write(PSTORE_TYPE_DMESG, reason, &id, part, - hsize + l1_cpy + l2_cpy, psinfo); + hsize + len, psinfo); if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted()) pstore_new_entry = 1; - l1 -= l1_cpy; - l2 -= l2_cpy; - total += l1_cpy + l2_cpy; + + total += hsize + len; part++; } if (in_nmi()) { diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index 9123cce28c1..453030f9c5b 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -106,6 +106,8 @@ static ssize_t ramoops_pstore_read(u64 *id, enum pstore_type_id *type, time->tv_sec = 0; time->tv_nsec = 0; + /* Update old/shadowed buffer. */ + persistent_ram_save_old(prz); size = persistent_ram_old_size(prz); *buf = kmalloc(size, GFP_KERNEL); if (*buf == NULL) @@ -184,6 +186,7 @@ static int ramoops_pstore_erase(enum pstore_type_id type, u64 id, return -EINVAL; persistent_ram_free_old(cxt->przs[id]); + persistent_ram_zap(cxt->przs[id]); return 0; } diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c index 31f8d184f3a..c5fbdbbf81a 100644 --- a/fs/pstore/ram_core.c +++ b/fs/pstore/ram_core.c @@ -250,23 +250,24 @@ static void notrace persistent_ram_update(struct persistent_ram_zone *prz, persistent_ram_update_ecc(prz, start, count); } -static void __init -persistent_ram_save_old(struct persistent_ram_zone *prz) +void persistent_ram_save_old(struct persistent_ram_zone *prz) { struct persistent_ram_buffer *buffer = prz->buffer; size_t size = buffer_size(prz); size_t start = buffer_start(prz); - char *dest; - persistent_ram_ecc_old(prz); + if (!size) + return; - dest = kmalloc(size, GFP_KERNEL); - if (dest == NULL) { + if (!prz->old_log) { + persistent_ram_ecc_old(prz); + prz->old_log = kmalloc(size, GFP_KERNEL); + } + if (!prz->old_log) { pr_err("persistent_ram: failed to allocate buffer\n"); return; } - prz->old_log = dest; prz->old_log_size = size; memcpy(prz->old_log, &buffer->data[start], size - start); memcpy(prz->old_log + size - start, &buffer->data[0], start); @@ -319,6 +320,13 @@ void persistent_ram_free_old(struct persistent_ram_zone *prz) prz->old_log_size = 0; } +void persistent_ram_zap(struct persistent_ram_zone *prz) +{ + atomic_set(&prz->buffer->start, 0); + atomic_set(&prz->buffer->size, 0); + persistent_ram_update_header_ecc(prz); +} + static void *persistent_ram_vmap(phys_addr_t start, size_t size) { struct page **pages; @@ -405,6 +413,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool " size %zu, start %zu\n", buffer_size(prz), buffer_start(prz)); persistent_ram_save_old(prz); + return 0; } } else { pr_info("persistent_ram: no valid data in buffer" @@ -412,8 +421,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool } prz->buffer->sig = PERSISTENT_RAM_SIG; - atomic_set(&prz->buffer->start, 0); - atomic_set(&prz->buffer->size, 0); + persistent_ram_zap(prz); return 0; } @@ -448,7 +456,6 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, goto err; persistent_ram_post_init(prz, ecc); - persistent_ram_update_header_ecc(prz); return prz; err: diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 9f02005f217..506ec19a373 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -2,7 +2,6 @@ #define _ASM_GENERIC_BUG_H #include <linux/compiler.h> -#include <linux/kernel.h> #ifdef CONFIG_BUG @@ -32,6 +31,9 @@ struct bug_entry { #endif /* CONFIG_GENERIC_BUG */ +#ifndef __ASSEMBLY__ +#include <linux/kernel.h> + /* * Don't use BUG() or BUG_ON() unless there's really no way out; one * example might be detecting data structure corruption in the middle @@ -61,7 +63,6 @@ struct bug_entry { * to provide better diagnostics. */ #ifndef __WARN_TAINT -#ifndef __ASSEMBLY__ extern __printf(3, 4) void warn_slowpath_fmt(const char *file, const int line, const char *fmt, ...); @@ -70,7 +71,6 @@ void warn_slowpath_fmt_taint(const char *file, const int line, unsigned taint, const char *fmt, ...); extern void warn_slowpath_null(const char *file, const int line); #define WANT_WARN_ON_SLOWPATH -#endif #define __WARN() warn_slowpath_null(__FILE__, __LINE__) #define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg) #define __WARN_printf_taint(taint, arg...) \ @@ -203,4 +203,6 @@ extern void warn_slowpath_null(const char *file, const int line); # define WARN_ON_SMP(x) ({0;}) #endif +#endif /* __ASSEMBLY__ */ + #endif diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 6f2b45a9b6b..ff4947b7a97 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -484,6 +484,16 @@ static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) /* * The barrier will stabilize the pmdval in a register or on * the stack so that it will stop changing under the code. + * + * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE, + * pmd_read_atomic is allowed to return a not atomic pmdval + * (for example pointing to an hugepage that has never been + * mapped in the pmd). The below checks will only care about + * the low part of the pmd with 32bit PAE x86 anyway, with the + * exception of pmd_none(). So the important thing is that if + * the low part of the pmd is found null, the high part will + * be also null or the pmd_none() check below would be + * confused. */ #ifdef CONFIG_TRANSPARENT_HUGEPAGE barrier(); diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h index 35f7237ec97..d6bd50110ec 100644 --- a/include/linux/kmsg_dump.h +++ b/include/linux/kmsg_dump.h @@ -21,6 +21,7 @@ * is passed to the kernel. */ enum kmsg_dump_reason { + KMSG_DUMP_UNDEF, KMSG_DUMP_PANIC, KMSG_DUMP_OOPS, KMSG_DUMP_EMERG, @@ -31,23 +32,37 @@ enum kmsg_dump_reason { /** * struct kmsg_dumper - kernel crash message dumper structure - * @dump: The callback which gets called on crashes. The buffer is passed - * as two sections, where s1 (length l1) contains the older - * messages and s2 (length l2) contains the newer. * @list: Entry in the dumper list (private) + * @dump: Call into dumping code which will retrieve the data with + * through the record iterator + * @max_reason: filter for highest reason number that should be dumped * @registered: Flag that specifies if this is already registered */ struct kmsg_dumper { - void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2); struct list_head list; - int registered; + void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason); + enum kmsg_dump_reason max_reason; + bool active; + bool registered; + + /* private state of the kmsg iterator */ + u32 cur_idx; + u32 next_idx; + u64 cur_seq; + u64 next_seq; }; #ifdef CONFIG_PRINTK void kmsg_dump(enum kmsg_dump_reason reason); +bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, + char *line, size_t size, size_t *len); + +bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, + char *buf, size_t size, size_t *len); + +void kmsg_dump_rewind(struct kmsg_dumper *dumper); + int kmsg_dump_register(struct kmsg_dumper *dumper); int kmsg_dump_unregister(struct kmsg_dumper *dumper); @@ -56,6 +71,22 @@ static inline void kmsg_dump(enum kmsg_dump_reason reason) { } +static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, + const char *line, size_t size, size_t *len) +{ + return false; +} + +static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, + char *buf, size_t size, size_t *len) +{ + return false; +} + +static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper) +{ +} + static inline int kmsg_dump_register(struct kmsg_dumper *dumper) { return -EINVAL; diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index dad95bdd06d..704a626d94a 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -57,8 +57,18 @@ struct page { }; union { +#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \ + defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE) /* Used for cmpxchg_double in slub */ unsigned long counters; +#else + /* + * Keep _count separate from slub cmpxchg_double data. + * As the rest of the double word is protected by + * slab_lock but _count is not. + */ + unsigned counters; +#endif struct { diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h index 5cdc96da9dd..e78c0e236e9 100644 --- a/include/linux/mmc/sdhci-spear.h +++ b/include/linux/mmc/sdhci-spear.h @@ -4,7 +4,7 @@ * SDHCI declarations specific to ST SPEAr platform * * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index c9fe66c58f8..17446d3c360 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -98,7 +98,9 @@ #define SDIO_CCCR_IF 0x07 /* bus interface controls */ +#define SDIO_BUS_WIDTH_MASK 0x03 /* data bus width setting */ #define SDIO_BUS_WIDTH_1BIT 0x00 +#define SDIO_BUS_WIDTH_RESERVED 0x01 #define SDIO_BUS_WIDTH_4BIT 0x02 #define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */ #define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */ diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h index a6ee9aa898b..a7b4fc386e6 100644 --- a/include/linux/pata_arasan_cf_data.h +++ b/include/linux/pata_arasan_cf_data.h @@ -4,7 +4,7 @@ * Arasan Compact Flash host controller platform data header file * * Copyright (C) 2011 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 7ed7fd4dba4..3b823d49a85 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -69,12 +69,14 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, size_t size, bool ecc); void persistent_ram_free(struct persistent_ram_zone *prz); +void persistent_ram_zap(struct persistent_ram_zone *prz); struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev, bool ecc); int persistent_ram_write(struct persistent_ram_zone *prz, const void *s, unsigned int count); +void persistent_ram_save_old(struct persistent_ram_zone *prz); size_t persistent_ram_old_size(struct persistent_ram_zone *prz); void *persistent_ram_old(struct persistent_ram_zone *prz); void persistent_ram_free_old(struct persistent_ram_zone *prz); diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 44835fb3979..f36632061c6 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -160,7 +160,9 @@ enum pxa_ssp_type { PXA25x_SSP, /* pxa 210, 250, 255, 26x */ PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ PXA27x_SSP, + PXA3xx_SSP, PXA168_SSP, + PXA910_SSP, CE4100_SSP, }; diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index d3e1075f7b6..c73d1445c77 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -43,7 +43,7 @@ struct pxa2xx_spi_chip { void (*cs_control)(u32 command); }; -#ifdef CONFIG_ARCH_PXA +#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) #include <linux/clk.h> #include <mach/dma.h> diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 72fcd3069a9..2097684cf19 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -255,12 +255,17 @@ int cgroup_lock_is_held(void) EXPORT_SYMBOL_GPL(cgroup_lock_is_held); +static int css_unbias_refcnt(int refcnt) +{ + return refcnt >= 0 ? refcnt : refcnt - CSS_DEACT_BIAS; +} + /* the current nr of refs, always >= 0 whether @css is deactivated or not */ static int css_refcnt(struct cgroup_subsys_state *css) { int v = atomic_read(&css->refcnt); - return v >= 0 ? v : v - CSS_DEACT_BIAS; + return css_unbias_refcnt(v); } /* convenient tests for these bits */ @@ -4982,10 +4987,12 @@ EXPORT_SYMBOL_GPL(__css_tryget); void __css_put(struct cgroup_subsys_state *css) { struct cgroup *cgrp = css->cgroup; + int v; rcu_read_lock(); - atomic_dec(&css->refcnt); - switch (css_refcnt(css)) { + v = css_unbias_refcnt(atomic_dec_return(&css->refcnt)); + + switch (v) { case 1: if (notify_on_release(cgrp)) { set_bit(CGRP_RELEASABLE, &cgrp->flags); diff --git a/kernel/exit.c b/kernel/exit.c index 34867cc5b42..2f59cc33451 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -72,6 +72,18 @@ static void __unhash_process(struct task_struct *p, bool group_dead) list_del_rcu(&p->tasks); list_del_init(&p->sibling); __this_cpu_dec(process_counts); + /* + * If we are the last child process in a pid namespace to be + * reaped, notify the reaper sleeping zap_pid_ns_processes(). + */ + if (IS_ENABLED(CONFIG_PID_NS)) { + struct task_struct *parent = p->real_parent; + + if ((task_active_pid_ns(parent)->child_reaper == parent) && + list_empty(&parent->children) && + (parent->flags & PF_EXITING)) + wake_up_process(parent); + } } list_del_rcu(&p->thread_group); } @@ -643,6 +655,7 @@ static void exit_mm(struct task_struct * tsk) mm_release(tsk, mm); if (!mm) return; + sync_mm_rss(mm); /* * Serialize with any possible pending coredump. * We must hold mmap_sem around checking core_state @@ -719,12 +732,6 @@ static struct task_struct *find_new_reaper(struct task_struct *father) zap_pid_ns_processes(pid_ns); write_lock_irq(&tasklist_lock); - /* - * We can not clear ->child_reaper or leave it alone. - * There may by stealth EXIT_DEAD tasks on ->children, - * forget_original_parent() must move them somewhere. - */ - pid_ns->child_reaper = init_pid_ns.child_reaper; } else if (father->signal->has_child_subreaper) { struct task_struct *reaper; diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 16b20e38c4a..b3c7fd55425 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -184,11 +184,31 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns) } read_unlock(&tasklist_lock); + /* Firstly reap the EXIT_ZOMBIE children we may have. */ do { clear_thread_flag(TIF_SIGPENDING); rc = sys_wait4(-1, NULL, __WALL, NULL); } while (rc != -ECHILD); + /* + * sys_wait4() above can't reap the TASK_DEAD children. + * Make sure they all go away, see __unhash_process(). + */ + for (;;) { + bool need_wait = false; + + read_lock(&tasklist_lock); + if (!list_empty(¤t->children)) { + __set_current_state(TASK_UNINTERRUPTIBLE); + need_wait = true; + } + read_unlock(&tasklist_lock); + + if (!need_wait) + break; + schedule(); + } + if (pid_ns->reboot) current->signal->group_exit_code = pid_ns->reboot; diff --git a/kernel/printk.c b/kernel/printk.c index 32462d2b364..a2276b91676 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -227,10 +227,10 @@ static u32 clear_idx; #define LOG_LINE_MAX 1024 /* record buffer */ -#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) +#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) #define LOG_ALIGN 4 #else -#define LOG_ALIGN 8 +#define LOG_ALIGN __alignof__(struct log) #endif #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT) static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN); @@ -414,7 +414,9 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf, if (!user) return -EBADF; - mutex_lock(&user->lock); + ret = mutex_lock_interruptible(&user->lock); + if (ret) + return ret; raw_spin_lock(&logbuf_lock); while (user->seq == log_next_seq) { if (file->f_flags & O_NONBLOCK) { @@ -878,7 +880,9 @@ static int syslog_print(char __user *buf, int size) syslog_seq++; raw_spin_unlock_irq(&logbuf_lock); - if (len > 0 && copy_to_user(buf, text, len)) + if (len > size) + len = -EINVAL; + else if (len > 0 && copy_to_user(buf, text, len)) len = -EFAULT; kfree(text); @@ -909,7 +913,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear) /* * Find first record that fits, including all following records, * into the user-provided buffer for this dump. - */ + */ seq = clear_seq; idx = clear_idx; while (seq < log_next_seq) { @@ -919,6 +923,8 @@ static int syslog_print_all(char __user *buf, int size, bool clear) idx = log_next(idx); seq++; } + + /* move first record forward until length fits into the buffer */ seq = clear_seq; idx = clear_idx; while (len > size && seq < log_next_seq) { @@ -929,7 +935,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear) seq++; } - /* last message in this dump */ + /* last message fitting into this dump */ next_seq = log_next_seq; len = 0; @@ -974,6 +980,7 @@ int do_syslog(int type, char __user *buf, int len, bool from_file) { bool clear = false; static int saved_console_loglevel = -1; + static DEFINE_MUTEX(syslog_mutex); int error; error = check_syslog_permissions(type, from_file); @@ -1000,11 +1007,17 @@ int do_syslog(int type, char __user *buf, int len, bool from_file) error = -EFAULT; goto out; } + error = mutex_lock_interruptible(&syslog_mutex); + if (error) + goto out; error = wait_event_interruptible(log_wait, syslog_seq != log_next_seq); - if (error) + if (error) { + mutex_unlock(&syslog_mutex); goto out; + } error = syslog_print(buf, len); + mutex_unlock(&syslog_mutex); break; /* Read/clear last kernel messages */ case SYSLOG_ACTION_READ_CLEAR: @@ -2300,48 +2313,210 @@ module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR); * kmsg_dump - dump kernel log to kernel message dumpers. * @reason: the reason (oops, panic etc) for dumping * - * Iterate through each of the dump devices and call the oops/panic - * callbacks with the log buffer. + * Call each of the registered dumper's dump() callback, which can + * retrieve the kmsg records with kmsg_dump_get_line() or + * kmsg_dump_get_buffer(). */ void kmsg_dump(enum kmsg_dump_reason reason) { - u64 idx; struct kmsg_dumper *dumper; - const char *s1, *s2; - unsigned long l1, l2; unsigned long flags; if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump) return; - /* Theoretically, the log could move on after we do this, but - there's not a lot we can do about that. The new messages - will overwrite the start of what we dump. */ + rcu_read_lock(); + list_for_each_entry_rcu(dumper, &dump_list, list) { + if (dumper->max_reason && reason > dumper->max_reason) + continue; + + /* initialize iterator with data about the stored records */ + dumper->active = true; + + raw_spin_lock_irqsave(&logbuf_lock, flags); + dumper->cur_seq = clear_seq; + dumper->cur_idx = clear_idx; + dumper->next_seq = log_next_seq; + dumper->next_idx = log_next_idx; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + + /* invoke dumper which will iterate over records */ + dumper->dump(dumper, reason); + + /* reset iterator */ + dumper->active = false; + } + rcu_read_unlock(); +} + +/** + * kmsg_dump_get_line - retrieve one kmsg log line + * @dumper: registered kmsg dumper + * @syslog: include the "<4>" prefixes + * @line: buffer to copy the line to + * @size: maximum size of the buffer + * @len: length of line placed into buffer + * + * Start at the beginning of the kmsg buffer, with the oldest kmsg + * record, and copy one record into the provided buffer. + * + * Consecutive calls will return the next available record moving + * towards the end of the buffer with the youngest messages. + * + * A return value of FALSE indicates that there are no more records to + * read. + */ +bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, + char *line, size_t size, size_t *len) +{ + unsigned long flags; + struct log *msg; + size_t l = 0; + bool ret = false; + + if (!dumper->active) + goto out; raw_spin_lock_irqsave(&logbuf_lock, flags); - if (syslog_seq < log_first_seq) - idx = syslog_idx; - else - idx = log_first_idx; + if (dumper->cur_seq < log_first_seq) { + /* messages are gone, move to first available one */ + dumper->cur_seq = log_first_seq; + dumper->cur_idx = log_first_idx; + } + + /* last entry */ + if (dumper->cur_seq >= log_next_seq) { + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + goto out; + } - if (idx > log_next_idx) { - s1 = log_buf; - l1 = log_next_idx; + msg = log_from_idx(dumper->cur_idx); + l = msg_print_text(msg, syslog, + line, size); - s2 = log_buf + idx; - l2 = log_buf_len - idx; - } else { - s1 = ""; - l1 = 0; + dumper->cur_idx = log_next(dumper->cur_idx); + dumper->cur_seq++; + ret = true; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); +out: + if (len) + *len = l; + return ret; +} +EXPORT_SYMBOL_GPL(kmsg_dump_get_line); + +/** + * kmsg_dump_get_buffer - copy kmsg log lines + * @dumper: registered kmsg dumper + * @syslog: include the "<4>" prefixes + * @line: buffer to copy the line to + * @size: maximum size of the buffer + * @len: length of line placed into buffer + * + * Start at the end of the kmsg buffer and fill the provided buffer + * with as many of the the *youngest* kmsg records that fit into it. + * If the buffer is large enough, all available kmsg records will be + * copied with a single call. + * + * Consecutive calls will fill the buffer with the next block of + * available older records, not including the earlier retrieved ones. + * + * A return value of FALSE indicates that there are no more records to + * read. + */ +bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, + char *buf, size_t size, size_t *len) +{ + unsigned long flags; + u64 seq; + u32 idx; + u64 next_seq; + u32 next_idx; + size_t l = 0; + bool ret = false; + + if (!dumper->active) + goto out; + + raw_spin_lock_irqsave(&logbuf_lock, flags); + if (dumper->cur_seq < log_first_seq) { + /* messages are gone, move to first available one */ + dumper->cur_seq = log_first_seq; + dumper->cur_idx = log_first_idx; + } + + /* last entry */ + if (dumper->cur_seq >= dumper->next_seq) { + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + goto out; + } + + /* calculate length of entire buffer */ + seq = dumper->cur_seq; + idx = dumper->cur_idx; + while (seq < dumper->next_seq) { + struct log *msg = log_from_idx(idx); + + l += msg_print_text(msg, true, NULL, 0); + idx = log_next(idx); + seq++; + } - s2 = log_buf + idx; - l2 = log_next_idx - idx; + /* move first record forward until length fits into the buffer */ + seq = dumper->cur_seq; + idx = dumper->cur_idx; + while (l > size && seq < dumper->next_seq) { + struct log *msg = log_from_idx(idx); + + l -= msg_print_text(msg, true, NULL, 0); + idx = log_next(idx); + seq++; + } + + /* last message in next interation */ + next_seq = seq; + next_idx = idx; + + l = 0; + while (seq < dumper->next_seq) { + struct log *msg = log_from_idx(idx); + + l += msg_print_text(msg, syslog, + buf + l, size - l); + + idx = log_next(idx); + seq++; } + + dumper->next_seq = next_seq; + dumper->next_idx = next_idx; + ret = true; raw_spin_unlock_irqrestore(&logbuf_lock, flags); +out: + if (len) + *len = l; + return ret; +} +EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer); - rcu_read_lock(); - list_for_each_entry_rcu(dumper, &dump_list, list) - dumper->dump(dumper, reason, s1, l1, s2, l2); - rcu_read_unlock(); +/** + * kmsg_dump_rewind - reset the interator + * @dumper: registered kmsg dumper + * + * Reset the dumper's iterator so that kmsg_dump_get_line() and + * kmsg_dump_get_buffer() can be called again and used multiple + * times within the same dumper.dump() callback. + */ +void kmsg_dump_rewind(struct kmsg_dumper *dumper) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&logbuf_lock, flags); + dumper->cur_seq = clear_seq; + dumper->cur_idx = clear_idx; + dumper->next_seq = log_next_seq; + dumper->next_idx = log_next_idx; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); } +EXPORT_SYMBOL_GPL(kmsg_dump_rewind); #endif diff --git a/kernel/sys.c b/kernel/sys.c index f0ec44dcd41..e0c8ffc50d7 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -2127,9 +2127,6 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, else return -EINVAL; break; - case PR_GET_TID_ADDRESS: - error = prctl_get_tid_address(me, (int __user **)arg2); - break; default: return -EINVAL; } @@ -2147,6 +2144,9 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, case PR_SET_MM: error = prctl_set_mm(arg2, arg3, arg4, arg5); break; + case PR_GET_TID_ADDRESS: + error = prctl_get_tid_address(me, (int __user **)arg2); + break; case PR_SET_CHILD_SUBREAPER: me->signal->is_child_subreaper = !!arg2; error = 0; diff --git a/lib/fault-inject.c b/lib/fault-inject.c index 6805453c18e..f7210ad6cff 100644 --- a/lib/fault-inject.c +++ b/lib/fault-inject.c @@ -101,6 +101,10 @@ static inline bool fail_stacktrace(struct fault_attr *attr) bool should_fail(struct fault_attr *attr, ssize_t size) { + /* No need to check any other properties if the probability is 0 */ + if (attr->probability == 0) + return false; + if (attr->task_filter && !fail_task(attr, current)) return false; diff --git a/mm/memblock.c b/mm/memblock.c index 32a0a5e4d79..d4382095f8b 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -184,7 +184,24 @@ static void __init_memblock memblock_remove_region(struct memblock_type *type, u } } -static int __init_memblock memblock_double_array(struct memblock_type *type) +/** + * memblock_double_array - double the size of the memblock regions array + * @type: memblock type of the regions array being doubled + * @new_area_start: starting address of memory range to avoid overlap with + * @new_area_size: size of memory range to avoid overlap with + * + * Double the size of the @type regions array. If memblock is being used to + * allocate memory for a new reserved regions array and there is a previously + * allocated memory range [@new_area_start,@new_area_start+@new_area_size] + * waiting to be reserved, ensure the memory used by the new array does + * not overlap. + * + * RETURNS: + * 0 on success, -1 on failure. + */ +static int __init_memblock memblock_double_array(struct memblock_type *type, + phys_addr_t new_area_start, + phys_addr_t new_area_size) { struct memblock_region *new_array, *old_array; phys_addr_t old_size, new_size, addr; @@ -222,7 +239,18 @@ static int __init_memblock memblock_double_array(struct memblock_type *type) new_array = kmalloc(new_size, GFP_KERNEL); addr = new_array ? __pa(new_array) : 0; } else { - addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t)); + /* only exclude range when trying to double reserved.regions */ + if (type != &memblock.reserved) + new_area_start = new_area_size = 0; + + addr = memblock_find_in_range(new_area_start + new_area_size, + memblock.current_limit, + new_size, sizeof(phys_addr_t)); + if (!addr && new_area_size) + addr = memblock_find_in_range(0, + min(new_area_start, memblock.current_limit), + new_size, sizeof(phys_addr_t)); + new_array = addr ? __va(addr) : 0; } if (!addr) { @@ -399,7 +427,7 @@ repeat: */ if (!insert) { while (type->cnt + nr_new > type->max) - if (memblock_double_array(type) < 0) + if (memblock_double_array(type, obase, size) < 0) return -ENOMEM; insert = true; goto repeat; @@ -450,7 +478,7 @@ static int __init_memblock memblock_isolate_range(struct memblock_type *type, /* we'll create at most two more regions */ while (type->cnt + 2 > type->max) - if (memblock_double_array(type) < 0) + if (memblock_double_array(type, base, size) < 0) return -ENOMEM; for (i = 0; i < type->cnt; i++) { @@ -540,9 +568,9 @@ int __init_memblock memblock_reserve(phys_addr_t base, phys_addr_t size) * __next_free_mem_range - next function for for_each_free_mem_range() * @idx: pointer to u64 loop variable * @nid: nid: node selector, %MAX_NUMNODES for all nodes - * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL - * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL - * @p_nid: ptr to int for nid of the range, can be %NULL + * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL + * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL + * @out_nid: ptr to int for nid of the range, can be %NULL * * Find the first free area from *@idx which matches @nid, fill the out * parameters, and update *@idx for the next iteration. The lower 32bit of @@ -616,9 +644,9 @@ void __init_memblock __next_free_mem_range(u64 *idx, int nid, * __next_free_mem_range_rev - next function for for_each_free_mem_range_reverse() * @idx: pointer to u64 loop variable * @nid: nid: node selector, %MAX_NUMNODES for all nodes - * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL - * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL - * @p_nid: ptr to int for nid of the range, can be %NULL + * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL + * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL + * @out_nid: ptr to int for nid of the range, can be %NULL * * Reverse of __next_free_mem_range(). */ diff --git a/mm/memcontrol.c b/mm/memcontrol.c index ac35bccadb7..f72b5e52451 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1148,7 +1148,7 @@ bool __mem_cgroup_same_or_subtree(const struct mem_cgroup *root_memcg, { if (root_memcg == memcg) return true; - if (!root_memcg->use_hierarchy) + if (!root_memcg->use_hierarchy || !memcg) return false; return css_is_ancestor(&memcg->css, &root_memcg->css); } @@ -1234,7 +1234,7 @@ int mem_cgroup_inactive_file_is_low(struct lruvec *lruvec) /** * mem_cgroup_margin - calculate chargeable space of a memory cgroup - * @mem: the memory cgroup + * @memcg: the memory cgroup * * Returns the maximum amount of memory @mem can be charged with, in * pages. @@ -1508,7 +1508,7 @@ static unsigned long mem_cgroup_reclaim(struct mem_cgroup *memcg, /** * test_mem_cgroup_node_reclaimable - * @mem: the target memcg + * @memcg: the target memcg * @nid: the node ID to be checked. * @noswap : specify true here if the user wants flle only information. * diff --git a/mm/memory.c b/mm/memory.c index 1b7dc662bf9..2466d125023 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1225,7 +1225,15 @@ static inline unsigned long zap_pmd_range(struct mmu_gather *tlb, next = pmd_addr_end(addr, end); if (pmd_trans_huge(*pmd)) { if (next - addr != HPAGE_PMD_SIZE) { - VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); +#ifdef CONFIG_DEBUG_VM + if (!rwsem_is_locked(&tlb->mm->mmap_sem)) { + pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n", + __func__, addr, end, + vma->vm_start, + vma->vm_end); + BUG(); + } +#endif split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) goto next; @@ -1366,7 +1374,7 @@ void unmap_vmas(struct mmu_gather *tlb, /** * zap_page_range - remove user pages in a given range * @vma: vm_area_struct holding the applicable pages - * @address: starting address of pages to zap + * @start: starting address of pages to zap * @size: number of bytes to zap * @details: details of nonlinear truncation or shared cache invalidation * diff --git a/mm/mempolicy.c b/mm/mempolicy.c index f15c1b24ca1..1d771e4200d 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1177,7 +1177,7 @@ static long do_mbind(unsigned long start, unsigned long len, if (!list_empty(&pagelist)) { nr_failed = migrate_pages(&pagelist, new_vma_page, (unsigned long)vma, - false, true); + false, MIGRATE_SYNC); if (nr_failed) putback_lru_pages(&pagelist); } diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 416637f0e92..ac300c99baf 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -184,6 +184,7 @@ unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg, const nodemask_t *nodemask, unsigned long totalpages) { long points; + long adj; if (oom_unkillable_task(p, memcg, nodemask)) return 0; @@ -192,7 +193,8 @@ unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg, if (!p) return 0; - if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) { + adj = p->signal->oom_score_adj; + if (adj == OOM_SCORE_ADJ_MIN) { task_unlock(p); return 0; } @@ -210,14 +212,11 @@ unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg, * implementation used by LSMs. */ if (has_capability_noaudit(p, CAP_SYS_ADMIN)) - points -= 30 * totalpages / 1000; + adj -= 30; - /* - * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may - * either completely disable oom killing or always prefer a certain - * task. - */ - points += p->signal->oom_score_adj * totalpages / 1000; + /* Normalize to oom_score_adj units */ + adj *= totalpages / 1000; + points += adj; /* * Never return 0 for an eligible task regardless of the root bonus and @@ -366,7 +365,7 @@ static struct task_struct *select_bad_process(unsigned int *ppoints, /** * dump_tasks - dump current memory state of all system tasks - * @mem: current's memory controller, if constrained + * @memcg: current's memory controller, if constrained * @nodemask: nodemask passed to page allocator for mempolicy ooms * * Dumps the current memory state of all eligible tasks. Tasks not in the same diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index 1ccbd714059..eb750f85139 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -392,7 +392,7 @@ static struct swap_cgroup *lookup_swap_cgroup(swp_entry_t ent, /** * swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry. - * @end: swap entry to be cmpxchged + * @ent: swap entry to be cmpxchged * @old: old id * @new: new id * @@ -422,7 +422,7 @@ unsigned short swap_cgroup_cmpxchg(swp_entry_t ent, /** * swap_cgroup_record - record mem_cgroup for this swp_entry. * @ent: swap entry to be recorded into - * @mem: mem_cgroup to be recorded + * @id: mem_cgroup to be recorded * * Returns old value at success, 0 at failure. * (Of course, old value can be 0.) diff --git a/mm/pagewalk.c b/mm/pagewalk.c index aa9701e1271..6c118d012bb 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -162,7 +162,6 @@ static int walk_hugetlb_range(struct vm_area_struct *vma, /** * walk_page_range - walk a memory map's page tables with a callback - * @mm: memory map to walk * @addr: starting address * @end: ending address * @walk: set of callbacks to invoke for each level of the tree diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index 405d331804c..3707c71ae4c 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -360,7 +360,6 @@ err_free: * @chunk: chunk to depopulate * @off: offset to the area to depopulate * @size: size of the area to depopulate in bytes - * @flush: whether to flush cache and tlb or not * * For each cpu, depopulate and unmap pages [@page_start,@page_end) * from @chunk. If @flush is true, vcache is flushed before unmapping diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 5af18d11b51..2a167658bb9 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -192,10 +192,10 @@ static int pack_sg_list(struct scatterlist *sg, int start, s = rest_of_page(data); if (s > count) s = count; + BUG_ON(index > limit); sg_set_buf(&sg[index++], data, s); count -= s; data += s; - BUG_ON(index > limit); } return index-start; diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 0948c6b5a32..8b673dd4627 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -83,6 +83,8 @@ push(@signature_tags, "Signed-off-by:"); push(@signature_tags, "Reviewed-by:"); push(@signature_tags, "Acked-by:"); +my $signature_pattern = "\(" . join("|", @signature_tags) . "\)"; + # rfc822 email address - preloaded methods go here. my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])"; my $rfc822_char = '[\\000-\\377]'; @@ -473,7 +475,6 @@ my @subsystem = (); my @status = (); my %deduplicate_name_hash = (); my %deduplicate_address_hash = (); -my $signature_pattern; my @maintainers = get_maintainers(); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 41ca803a1ff..7504e62188d 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4393,20 +4393,19 @@ void snd_hda_update_power_acct(struct hda_codec *codec) codec->power_jiffies += delta; } -/** - * snd_hda_power_up - Power-up the codec - * @codec: HD-audio codec - * - * Increment the power-up counter and power up the hardware really when - * not turned on yet. - */ -void snd_hda_power_up(struct hda_codec *codec) +/* Transition to powered up, if wait_power_down then wait for a pending + * transition to D3 to complete. A pending D3 transition is indicated + * with power_transition == -1. */ +static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down) { struct hda_bus *bus = codec->bus; spin_lock(&codec->power_lock); codec->power_count++; - if (codec->power_on || codec->power_transition > 0) { + /* Return if power_on or transitioning to power_on, unless currently + * powering down. */ + if ((codec->power_on || codec->power_transition > 0) && + !(wait_power_down && codec->power_transition < 0)) { spin_unlock(&codec->power_lock); return; } @@ -4430,8 +4429,37 @@ void snd_hda_power_up(struct hda_codec *codec) codec->power_transition = 0; spin_unlock(&codec->power_lock); } + +/** + * snd_hda_power_up - Power-up the codec + * @codec: HD-audio codec + * + * Increment the power-up counter and power up the hardware really when + * not turned on yet. + */ +void snd_hda_power_up(struct hda_codec *codec) +{ + __snd_hda_power_up(codec, false); +} EXPORT_SYMBOL_HDA(snd_hda_power_up); +/** + * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending + * D3 transition to complete. This differs from snd_hda_power_up() when + * power_transition == -1. snd_hda_power_up sees this case as a nop, + * snd_hda_power_up_d3wait waits for the D3 transition to complete then powers + * back up. + * @codec: HD-audio codec + * + * Cancel any power down operation hapenning on the work queue, then power up. + */ +void snd_hda_power_up_d3wait(struct hda_codec *codec) +{ + /* This will cancel and wait for pending power_work to complete. */ + __snd_hda_power_up(codec, true); +} +EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait); + #define power_save(codec) \ ((codec)->bus->power_save ? *(codec)->bus->power_save : 0) diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 4fc3960c859..2fdaadbb432 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -1056,10 +1056,12 @@ const char *snd_hda_get_jack_location(u32 cfg); */ #ifdef CONFIG_SND_HDA_POWER_SAVE void snd_hda_power_up(struct hda_codec *codec); +void snd_hda_power_up_d3wait(struct hda_codec *codec); void snd_hda_power_down(struct hda_codec *codec); void snd_hda_update_power_acct(struct hda_codec *codec); #else static inline void snd_hda_power_up(struct hda_codec *codec) {} +static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {} static inline void snd_hda_power_down(struct hda_codec *codec) {} #endif diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 02763827dde..7757536b9d5 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1766,7 +1766,7 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) buff_step); snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, buff_step); - snd_hda_power_up(apcm->codec); + snd_hda_power_up_d3wait(apcm->codec); err = hinfo->ops.open(hinfo, apcm->codec, substream); if (err < 0) { azx_release_device(azx_dev); diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 65d525d74c5..812acd83fb4 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1863,6 +1863,7 @@ static int wm8904_set_bias_level(struct snd_soc_codec *codec, return ret; } + regcache_cache_only(wm8904->regmap, false); regcache_sync(wm8904->regmap); /* Enable bias */ @@ -1899,14 +1900,8 @@ static int wm8904_set_bias_level(struct snd_soc_codec *codec, snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0, WM8904_BIAS_ENA, 0); -#ifdef CONFIG_REGULATOR - /* Post 2.6.34 we will be able to get a callback when - * the regulators are disabled which we can use but - * for now just assume that the power will be cut if - * the regulator API is in use. - */ - codec->cache_sync = 1; -#endif + regcache_cache_only(wm8904->regmap, true); + regcache_mark_dirty(wm8904->regmap); regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies); @@ -2084,10 +2079,8 @@ static int wm8904_probe(struct snd_soc_codec *codec) { struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec); struct wm8904_pdata *pdata = wm8904->pdata; - u16 *reg_cache = codec->reg_cache; int ret, i; - codec->cache_sync = 1; codec->control_data = wm8904->regmap; switch (wm8904->devtype) { @@ -2150,6 +2143,7 @@ static int wm8904_probe(struct snd_soc_codec *codec) goto err_enable; } + regcache_cache_only(wm8904->regmap, true); /* Change some default settings - latch VU and enable ZC */ snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT, WM8904_ADC_VU, WM8904_ADC_VU); @@ -2180,14 +2174,18 @@ static int wm8904_probe(struct snd_soc_codec *codec) if (!pdata->gpio_cfg[i]) continue; - reg_cache[WM8904_GPIO_CONTROL_1 + i] - = pdata->gpio_cfg[i] & 0xffff; + regmap_update_bits(wm8904->regmap, + WM8904_GPIO_CONTROL_1 + i, + 0xffff, + pdata->gpio_cfg[i]); } /* Zero is the default value for these anyway */ for (i = 0; i < WM8904_MIC_REGS; i++) - reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i] - = pdata->mic_cfg[i]; + regmap_update_bits(wm8904->regmap, + WM8904_MIC_BIAS_CONTROL_0 + i, + 0xffff, + pdata->mic_cfg[i]); } /* Set Class W by default - this will be managed by the Class diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 8af422e38fd..dc9b42b7fc4 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -2837,8 +2837,6 @@ static int wm8996_probe(struct snd_soc_codec *codec) } } - regcache_cache_only(codec->control_data, true); - /* Apply platform data settings */ snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL, WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK, @@ -3051,7 +3049,6 @@ static int wm8996_remove(struct snd_soc_codec *codec) for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) regulator_unregister_notifier(wm8996->supplies[i].consumer, &wm8996->disable_nb[i]); - regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); return 0; } @@ -3206,14 +3203,15 @@ static __devinit int wm8996_i2c_probe(struct i2c_client *i2c, dev_info(&i2c->dev, "revision %c\n", (reg & WM8996_CHIP_REV_MASK) + 'A'); - regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); - ret = wm8996_reset(wm8996); if (ret < 0) { dev_err(&i2c->dev, "Failed to issue reset\n"); goto err_regmap; } + regcache_cache_only(wm8996->regmap, true); + regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); + wm8996_init_gpio(wm8996); ret = snd_soc_register_codec(&i2c->dev, diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 1c2aa7fab3f..4da5fc55c7e 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -33,7 +33,6 @@ #include <mach/hardware.h> #include <mach/dma.h> -#include <mach/audio.h> #include "../../arm/pxa2xx-pcm.h" #include "pxa-ssp.h" @@ -194,7 +193,7 @@ static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) { u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); - if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { + if (ssp->type == PXA25x_SSP) { sscr0 &= ~0x0000ff00; sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ } else { @@ -212,7 +211,7 @@ static u32 pxa_ssp_get_scr(struct ssp_device *ssp) u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); u32 div; - if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) + if (ssp->type == PXA25x_SSP) div = ((sscr0 >> 8) & 0xff) * 2 + 2; else div = ((sscr0 >> 8) & 0xfff) + 1; @@ -242,7 +241,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, break; case PXA_SSP_CLK_PLL: /* Internal PLL is fixed */ - if (cpu_is_pxa25x()) + if (ssp->type == PXA25x_SSP) priv->sysclk = 1843200; else priv->sysclk = 13000000; @@ -266,11 +265,11 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, /* The SSP clock must be disabled when changing SSP clock mode * on PXA2xx. On PXA3xx it must be enabled when doing so. */ - if (!cpu_is_pxa3xx()) + if (ssp->type != PXA3xx_SSP) clk_disable(ssp->clk); val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0; pxa_ssp_write_reg(ssp, SSCR0, val); - if (!cpu_is_pxa3xx()) + if (ssp->type != PXA3xx_SSP) clk_enable(ssp->clk); return 0; @@ -294,24 +293,20 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, case PXA_SSP_AUDIO_DIV_SCDB: val = pxa_ssp_read_reg(ssp, SSACD); val &= ~SSACD_SCDB; -#if defined(CONFIG_PXA3xx) - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) val &= ~SSACD_SCDX8; -#endif switch (div) { case PXA_SSP_CLK_SCDB_1: val |= SSACD_SCDB; break; case PXA_SSP_CLK_SCDB_4: break; -#if defined(CONFIG_PXA3xx) case PXA_SSP_CLK_SCDB_8: - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) val |= SSACD_SCDX8; else return -EINVAL; break; -#endif default: return -EINVAL; } @@ -337,10 +332,8 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, struct ssp_device *ssp = priv->ssp; u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; -#if defined(CONFIG_PXA3xx) - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) pxa_ssp_write_reg(ssp, SSACDD, 0); -#endif switch (freq_out) { case 5622000: @@ -365,11 +358,10 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, break; default: -#ifdef CONFIG_PXA3xx /* PXA3xx has a clock ditherer which can be used to generate * a wider range of frequencies - calculate a value for it. */ - if (cpu_is_pxa3xx()) { + if (ssp->type == PXA3xx_SSP) { u32 val; u64 tmp = 19968; tmp *= 1000000; @@ -386,7 +378,6 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, val, freq_out); break; } -#endif return -EINVAL; } @@ -590,10 +581,8 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, /* bit size */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: -#ifdef CONFIG_PXA3xx - if (cpu_is_pxa3xx()) + if (ssp->type == PXA3xx_SSP) sscr0 |= SSCR0_FPCKE; -#endif sscr0 |= SSCR0_DataSize(16); break; case SNDRV_PCM_FORMAT_S24_LE: @@ -618,9 +607,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, * trying and failing a lot; some of the registers * needed for that mode are only available on PXA3xx. */ - -#ifdef CONFIG_PXA3xx - if (!cpu_is_pxa3xx()) + if (ssp->type != PXA3xx_SSP) return -EINVAL; sspsp |= SSPSP_SFRMWDTH(width * 2); @@ -628,9 +615,6 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sspsp |= SSPSP_EDMYSTOP(3); sspsp |= SSPSP_DMYSTOP(3); sspsp |= SSPSP_DMYSTRT(1); -#else - return -EINVAL; -#endif } else { /* The frame width is the width the LRCLK is * asserted for; the delay is expressed in diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c index 0b0df49d9d3..3b6da91188a 100644 --- a/sound/soc/tegra/tegra_wm8903.c +++ b/sound/soc/tegra/tegra_wm8903.c @@ -346,6 +346,17 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd) return 0; } +static int tegra_wm8903_remove(struct snd_soc_card *card) +{ + struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]); + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_codec *codec = codec_dai->codec; + + wm8903_mic_detect(codec, NULL, 0, 0); + + return 0; +} + static struct snd_soc_dai_link tegra_wm8903_dai = { .name = "WM8903", .stream_name = "WM8903 PCM", @@ -363,6 +374,8 @@ static struct snd_soc_card snd_soc_tegra_wm8903 = { .dai_link = &tegra_wm8903_dai, .num_links = 1, + .remove = tegra_wm8903_remove, + .controls = tegra_wm8903_controls, .num_controls = ARRAY_SIZE(tegra_wm8903_controls), .dapm_widgets = tegra_wm8903_dapm_widgets, diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index 6f9715ab32f..56ad923bf6b 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -209,7 +209,7 @@ static int usb6fire_fw_ezusb_upload( int ret; u8 data; struct usb_device *device = interface_to_usbdev(intf); - const struct firmware *fw = 0; + const struct firmware *fw = NULL; struct ihex_record *rec = kmalloc(sizeof(struct ihex_record), GFP_KERNEL); diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index cdf8b760197..54607f8c4f6 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -354,17 +354,21 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) (get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE && get_endpoint(alts, 1)->bSynchAddress != 0 && !implicit_fb)) { - snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n", - dev->devnum, fmt->iface, fmt->altsetting); + snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n", + dev->devnum, fmt->iface, fmt->altsetting, + get_endpoint(alts, 1)->bmAttributes, + get_endpoint(alts, 1)->bLength, + get_endpoint(alts, 1)->bSynchAddress); return -EINVAL; } ep = get_endpoint(alts, 1)->bEndpointAddress; - if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE && + if (!implicit_fb && + get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE && (( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) || - (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) || - ( is_playback && !implicit_fb))) { - snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n", - dev->devnum, fmt->iface, fmt->altsetting); + (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) { + snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n", + dev->devnum, fmt->iface, fmt->altsetting, + is_playback, ep, get_endpoint(alts, 0)->bSynchAddress); return -EINVAL; } @@ -1147,7 +1151,8 @@ static int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substrea return -EINVAL; } -int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd) +static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, + int cmd) { int err; struct snd_usb_substream *subs = substream->runtime->private_data; diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index 146fd6147e8..d9834b36294 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -701,14 +701,18 @@ int main(void) pfd.fd = fd; while (1) { + struct sockaddr *addr_p = (struct sockaddr *) &addr; + socklen_t addr_l = sizeof(addr); pfd.events = POLLIN; pfd.revents = 0; poll(&pfd, 1, -1); - len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0); + len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0, + addr_p, &addr_l); - if (len < 0) { - syslog(LOG_ERR, "recv failed; error:%d", len); + if (len < 0 || addr.nl_pid) { + syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s", + addr.nl_pid, errno, strerror(errno)); close(fd); return -1; } |