usb: host: omap: common usb host core driver

enabling and disabling the common clocks for ehci
and ohci is implemented. usbhs is a common parent
platform driver for EHCI and OHCI driver. This driver
receives the clock enable and disable requests
from ehci and ohci drivers.The UHH and TLL
initialization is also performed.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 1061 insertions, 0 deletions

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
new file mode 100644
index 00000000000..cb01209754e
--- /dev/null
+++ b/drivers/mfd/omap-usb-host.c
@@ -0,0 +1,1061 @@
+/**
+ * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <plat/usb.h>
+
+#define USBHS_DRIVER_NAME	"usbhs-omap"
+#define OMAP_EHCI_DEVICE	"ehci-omap"
+#define OMAP_OHCI_DEVICE	"ohci-omap3"
+
+/* OMAP USBHOST Register addresses  */
+
+/* TLL Register Set */
+#define	OMAP_USBTLL_REVISION				(0x00)
+#define	OMAP_USBTLL_SYSCONFIG				(0x10)
+#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_USBTLL_SYSSTATUS				(0x14)
+#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
+
+#define	OMAP_USBTLL_IRQSTATUS				(0x18)
+#define	OMAP_USBTLL_IRQENABLE				(0x1C)
+
+#define	OMAP_TLL_SHARED_CONF				(0x30)
+#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
+#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
+#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
+#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
+#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
+
+#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
+#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24
+#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
+#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
+#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
+#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
+#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1)
+#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
+
+#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0		0x0
+#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM		0x1
+#define OMAP_TLL_FSLSMODE_3PIN_PHY			0x2
+#define OMAP_TLL_FSLSMODE_4PIN_PHY			0x3
+#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0		0x4
+#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM		0x5
+#define OMAP_TLL_FSLSMODE_3PIN_TLL			0x6
+#define OMAP_TLL_FSLSMODE_4PIN_TLL			0x7
+#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0		0xA
+#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM		0xB
+
+#define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num)
+#define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num)
+#define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num)
+#define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num)
+#define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
+
+#define OMAP_TLL_CHANNEL_COUNT				3
+#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0)
+#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1)
+#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2)
+
+/* UHH Register Set */
+#define	OMAP_UHH_REVISION				(0x00)
+#define	OMAP_UHH_SYSCONFIG				(0x10)
+#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
+#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_UHH_SYSSTATUS				(0x14)
+#define	OMAP_UHH_HOSTCONFIG				(0x40)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
+#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
+
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
+#define OMAP4_P1_MODE_TLL				(1 << 16)
+#define OMAP4_P1_MODE_HSIC				(3 << 16)
+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
+#define OMAP4_P2_MODE_TLL				(1 << 18)
+#define OMAP4_P2_MODE_HSIC				(3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
+#define	OMAP_UHH_DEBUG_CSR				(0x44)
+
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */
+#define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */
+
+#define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1)
+#define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2)
+
+#define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
+
+
+struct usbhs_hcd_omap {
+	struct clk			*usbhost_ick;
+	struct clk			*usbhost_hs_fck;
+	struct clk			*usbhost_fs_fck;
+	struct clk			*xclk60mhsp1_ck;
+	struct clk			*xclk60mhsp2_ck;
+	struct clk			*utmi_p1_fck;
+	struct clk			*usbhost_p1_fck;
+	struct clk			*usbtll_p1_fck;
+	struct clk			*utmi_p2_fck;
+	struct clk			*usbhost_p2_fck;
+	struct clk			*usbtll_p2_fck;
+	struct clk			*init_60m_fclk;
+	struct clk			*usbtll_fck;
+	struct clk			*usbtll_ick;
+
+	void __iomem			*uhh_base;
+	void __iomem			*tll_base;
+
+	struct usbhs_omap_platform_data	platdata;
+
+	u32				usbhs_rev;
+	spinlock_t			lock;
+	int				count;
+};
+/*-------------------------------------------------------------------------*/
+
+const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
+static u64 usbhs_dmamask = ~(u32)0;
+
+/*-------------------------------------------------------------------------*/
+
+static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
+{
+	__raw_writel(val, base + reg);
+}
+
+static inline u32 usbhs_read(void __iomem *base, u32 reg)
+{
+	return __raw_readl(base + reg);
+}
+
+static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
+{
+	__raw_writeb(val, base + reg);
+}
+
+static inline u8 usbhs_readb(void __iomem *base, u8 reg)
+{
+	return __raw_readb(base + reg);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct platform_device *omap_usbhs_alloc_child(const char *name,
+			struct resource	*res, int num_resources, void *pdata,
+			size_t pdata_size, struct device *dev)
+{
+	struct platform_device	*child;
+	int			ret;
+
+	child = platform_device_alloc(name, 0);
+
+	if (!child) {
+		dev_err(dev, "platform_device_alloc %s failed\n", name);
+		goto err_end;
+	}
+
+	ret = platform_device_add_resources(child, res, num_resources);
+	if (ret) {
+		dev_err(dev, "platform_device_add_resources failed\n");
+		goto err_alloc;
+	}
+
+	ret = platform_device_add_data(child, pdata, pdata_size);
+	if (ret) {
+		dev_err(dev, "platform_device_add_data failed\n");
+		goto err_alloc;
+	}
+
+	child->dev.dma_mask		= &usbhs_dmamask;
+	child->dev.coherent_dma_mask	= 0xffffffff;
+	child->dev.parent		= dev;
+
+	ret = platform_device_add(child);
+	if (ret) {
+		dev_err(dev, "platform_device_add failed\n");
+		goto err_alloc;
+	}
+
+	return child;
+
+err_alloc:
+	platform_device_put(child);
+
+err_end:
+	return NULL;
+}
+
+static int omap_usbhs_alloc_children(struct platform_device *pdev)
+{
+	struct device				*dev = &pdev->dev;
+	struct usbhs_hcd_omap			*omap;
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+	struct platform_device			*ehci;
+	struct platform_device			*ohci;
+	struct resource				*res;
+	struct resource				resources[2];
+	int					ret;
+
+	omap = platform_get_drvdata(pdev);
+	ehci_data = omap->platdata.ehci_data;
+	ohci_data = omap->platdata.ohci_data;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
+	if (!res) {
+		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
+	if (!res) {
+		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_end;
+	}
+	resources[1] = *res;
+
+	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
+		sizeof(*ehci_data), dev);
+
+	if (!ehci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		goto err_end;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[0] = *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
+	if (!res) {
+		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
+		ret = -ENODEV;
+		goto err_ehci;
+	}
+	resources[1] = *res;
+
+	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
+		sizeof(*ohci_data), dev);
+	if (!ohci) {
+		dev_err(dev, "omap_usbhs_alloc_child failed\n");
+		goto err_ehci;
+	}
+
+	return 0;
+
+err_ehci:
+	platform_device_put(ehci);
+
+err_end:
+	return ret;
+}
+
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int __devinit usbhs_omap_probe(struct platform_device *pdev)
+{
+	struct device			*dev =  &pdev->dev;
+	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
+	struct usbhs_hcd_omap		*omap;
+	struct resource			*res;
+	int				ret = 0;
+	int				i;
+
+	if (!pdata) {
+		dev_err(dev, "Missing platfrom data\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(dev, "Memory allocation failed\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	spin_lock_init(&omap->lock);
+
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+		omap->platdata.port_mode[i] = pdata->port_mode[i];
+
+	omap->platdata.ehci_data = pdata->ehci_data;
+	omap->platdata.ohci_data = pdata->ohci_data;
+
+	omap->usbhost_ick = clk_get(dev, "usbhost_ick");
+	if (IS_ERR(omap->usbhost_ick)) {
+		ret =  PTR_ERR(omap->usbhost_ick);
+		dev_err(dev, "usbhost_ick failed error:%d\n", ret);
+		goto err_end;
+	}
+
+	omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
+	if (IS_ERR(omap->usbhost_hs_fck)) {
+		ret = PTR_ERR(omap->usbhost_hs_fck);
+		dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
+		goto err_usbhost_ick;
+	}
+
+	omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
+	if (IS_ERR(omap->usbhost_fs_fck)) {
+		ret = PTR_ERR(omap->usbhost_fs_fck);
+		dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
+		goto err_usbhost_hs_fck;
+	}
+
+	omap->usbtll_fck = clk_get(dev, "usbtll_fck");
+	if (IS_ERR(omap->usbtll_fck)) {
+		ret = PTR_ERR(omap->usbtll_fck);
+		dev_err(dev, "usbtll_fck failed error:%d\n", ret);
+		goto err_usbhost_fs_fck;
+	}
+
+	omap->usbtll_ick = clk_get(dev, "usbtll_ick");
+	if (IS_ERR(omap->usbtll_ick)) {
+		ret = PTR_ERR(omap->usbtll_ick);
+		dev_err(dev, "usbtll_ick failed error:%d\n", ret);
+		goto err_usbtll_fck;
+	}
+
+	omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+	if (IS_ERR(omap->utmi_p1_fck)) {
+		ret = PTR_ERR(omap->utmi_p1_fck);
+		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
+		goto err_usbtll_ick;
+	}
+
+	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+	if (IS_ERR(omap->xclk60mhsp1_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp1_ck);
+		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+		goto err_utmi_p1_fck;
+	}
+
+	omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+	if (IS_ERR(omap->utmi_p2_fck)) {
+		ret = PTR_ERR(omap->utmi_p2_fck);
+		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+		goto err_xclk60mhsp1_ck;
+	}
+
+	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+	if (IS_ERR(omap->xclk60mhsp2_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp2_ck);
+		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+		goto err_utmi_p2_fck;
+	}
+
+	omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+	if (IS_ERR(omap->usbhost_p1_fck)) {
+		ret = PTR_ERR(omap->usbhost_p1_fck);
+		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+		goto err_xclk60mhsp2_ck;
+	}
+
+	omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
+	if (IS_ERR(omap->usbtll_p1_fck)) {
+		ret = PTR_ERR(omap->usbtll_p1_fck);
+		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
+		goto err_usbhost_p1_fck;
+	}
+
+	omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+	if (IS_ERR(omap->usbhost_p2_fck)) {
+		ret = PTR_ERR(omap->usbhost_p2_fck);
+		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+		goto err_usbtll_p1_fck;
+	}
+
+	omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
+	if (IS_ERR(omap->usbtll_p2_fck)) {
+		ret = PTR_ERR(omap->usbtll_p2_fck);
+		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
+		goto err_usbhost_p2_fck;
+	}
+
+	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+	if (IS_ERR(omap->init_60m_fclk)) {
+		ret = PTR_ERR(omap->init_60m_fclk);
+		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+		goto err_usbtll_p2_fck;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_init_60m_fclk;
+	}
+
+	omap->uhh_base = ioremap(res->start, resource_size(res));
+	if (!omap->uhh_base) {
+		dev_err(dev, "UHH ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_init_60m_fclk;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_tll;
+	}
+
+	omap->tll_base = ioremap(res->start, resource_size(res));
+	if (!omap->tll_base) {
+		dev_err(dev, "TLL ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_tll;
+	}
+
+	platform_set_drvdata(pdev, omap);
+
+	ret = omap_usbhs_alloc_children(pdev);
+	if (ret) {
+		dev_err(dev, "omap_usbhs_alloc_children failed\n");
+		goto err_alloc;
+	}
+
+	goto end_probe;
+
+err_alloc:
+	iounmap(omap->tll_base);
+
+err_tll:
+	iounmap(omap->uhh_base);
+
+err_init_60m_fclk:
+	clk_put(omap->init_60m_fclk);
+
+err_usbtll_p2_fck:
+	clk_put(omap->usbtll_p2_fck);
+
+err_usbhost_p2_fck:
+	clk_put(omap->usbhost_p2_fck);
+
+err_usbtll_p1_fck:
+	clk_put(omap->usbtll_p1_fck);
+
+err_usbhost_p1_fck:
+	clk_put(omap->usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+	clk_put(omap->xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+	clk_put(omap->utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+	clk_put(omap->xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+	clk_put(omap->utmi_p1_fck);
+
+err_usbtll_ick:
+	clk_put(omap->usbtll_ick);
+
+err_usbtll_fck:
+	clk_put(omap->usbtll_fck);
+
+err_usbhost_fs_fck:
+	clk_put(omap->usbhost_fs_fck);
+
+err_usbhost_hs_fck:
+	clk_put(omap->usbhost_hs_fck);
+
+err_usbhost_ick:
+	clk_put(omap->usbhost_ick);
+
+err_end:
+	kfree(omap);
+
+end_probe:
+	return ret;
+}
+
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int __devexit usbhs_omap_remove(struct platform_device *pdev)
+{
+	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+
+	if (omap->count != 0) {
+		dev_err(&pdev->dev,
+			"Either EHCI or OHCI is still using usbhs core\n");
+		return -EBUSY;
+	}
+
+	iounmap(omap->tll_base);
+	iounmap(omap->uhh_base);
+	clk_put(omap->init_60m_fclk);
+	clk_put(omap->usbtll_p2_fck);
+	clk_put(omap->usbhost_p2_fck);
+	clk_put(omap->usbtll_p1_fck);
+	clk_put(omap->usbhost_p1_fck);
+	clk_put(omap->xclk60mhsp2_ck);
+	clk_put(omap->utmi_p2_fck);
+	clk_put(omap->xclk60mhsp1_ck);
+	clk_put(omap->utmi_p1_fck);
+	clk_put(omap->usbtll_ick);
+	clk_put(omap->usbtll_fck);
+	clk_put(omap->usbhost_fs_fck);
+	clk_put(omap->usbhost_hs_fck);
+	clk_put(omap->usbhost_ick);
+	kfree(omap);
+
+	return 0;
+}
+
+static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
+{
+	switch (pmode) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/*
+ * convert the port-mode enum to a value we can use in the FSLSMODE
+ * field of USBTLL_CHANNEL_CONF
+ */
+static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
+{
+	switch (mode) {
+	case OMAP_USBHS_PORT_MODE_UNUSED:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_3PIN_PHY;
+
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_4PIN_PHY;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
+
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_3PIN_TLL;
+
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_4PIN_TLL;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+		return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
+	default:
+		pr_warning("Invalid port mode, using default\n");
+		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
+	}
+}
+
+static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
+	unsigned			reg;
+	int				i;
+
+	/* Program Common TLL register */
+	reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
+	reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
+		| OMAP_TLL_SHARED_CONF_USB_DIVRATION);
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
+
+	usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
+
+	/* Enable channels now */
+	for (i = 0; i < tll_channel_count; i++) {
+		reg = usbhs_read(omap->tll_base,
+				OMAP_TLL_CHANNEL_CONF(i));
+
+		if (is_ohci_port(pdata->port_mode[i])) {
+			reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
+				<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
+			reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
+		} else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {
+
+			/* Disable AutoIdle, BitStuffing and use SDR Mode */
+			reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
+				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
+				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
+
+			reg |= (1 << (i + 1));
+		} else
+			continue;
+
+		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
+		usbhs_write(omap->tll_base,
+				OMAP_TLL_CHANNEL_CONF(i), reg);
+
+		usbhs_writeb(omap->tll_base,
+				OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
+	}
+}
+
+static int usbhs_enable(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags = 0;
+	int				ret = 0;
+	unsigned long			timeout;
+	unsigned			reg;
+
+	dev_dbg(dev, "starting TI HSUSB Controller\n");
+	if (!pdata) {
+		dev_dbg(dev, "missing platform_data\n");
+		ret =  -ENODEV;
+		goto end_enable;
+	}
+
+	spin_lock_irqsave(&omap->lock, flags);
+	if (omap->count > 0)
+		goto end_count;
+
+	clk_enable(omap->usbhost_ick);
+	clk_enable(omap->usbhost_hs_fck);
+	clk_enable(omap->usbhost_fs_fck);
+	clk_enable(omap->usbtll_fck);
+	clk_enable(omap->usbtll_ick);
+
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
+			gpio_request(pdata->ehci_data->reset_gpio_port[0],
+						"USB1 PHY reset");
+			gpio_direction_output
+				(pdata->ehci_data->reset_gpio_port[0], 1);
+		}
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
+			gpio_request(pdata->ehci_data->reset_gpio_port[1],
+						"USB2 PHY reset");
+			gpio_direction_output
+				(pdata->ehci_data->reset_gpio_port[1], 1);
+		}
+
+		/* Hold the PHY in RESET for enough time till DIR is high */
+		udelay(10);
+	}
+
+	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
+	dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
+
+	/* perform TLL soft reset, and wait until reset is complete */
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
+
+	/* Wait for TLL reset to complete */
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout)) {
+			dev_dbg(dev, "operation timed out\n");
+			ret = -EINVAL;
+			goto err_tll;
+		}
+	}
+
+	dev_dbg(dev, "TLL RESET DONE\n");
+
+	/* (1<<3) = no idle mode only for initial debugging */
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+			OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
+
+	/* Put UHH in NoIdle/NoStandby mode */
+	reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
+	if (is_omap_usbhs_rev1(omap)) {
+		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+				| OMAP_UHH_SYSCONFIG_SIDLEMODE
+				| OMAP_UHH_SYSCONFIG_CACTIVITY
+				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
+		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
+
+	} else if (is_omap_usbhs_rev2(omap)) {
+		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+	}
+
+	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
+
+	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
+	/* setup ULPI bypass and burst configurations */
+	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
+	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
+	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
+
+	if (is_omap_usbhs_rev1(omap)) {
+		if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+		if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+		if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+		/* Bypass the TLL module for PHY mode operation */
+		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
+			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
+				is_ehci_phy_mode(pdata->port_mode[1]) ||
+					is_ehci_phy_mode(pdata->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+		} else {
+			dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
+			if (is_ehci_phy_mode(pdata->port_mode[0]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			if (is_ehci_phy_mode(pdata->port_mode[1]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			if (is_ehci_phy_mode(pdata->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		}
+	} else if (is_omap_usbhs_rev2(omap)) {
+		/* Clear port mode fields for PHY mode*/
+		reg &= ~OMAP4_P1_MODE_CLEAR;
+		reg &= ~OMAP4_P2_MODE_CLEAR;
+
+		if (is_ehci_phy_mode(pdata->port_mode[0])) {
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->xclk60mhsp1_ck);
+			if (ret != 0) {
+				dev_err(dev, "xclk60mhsp1_ck set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+		} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->init_60m_fclk);
+			if (ret != 0) {
+				dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+			clk_enable(omap->usbhost_p1_fck);
+			clk_enable(omap->usbtll_p1_fck);
+		}
+
+		if (is_ehci_phy_mode(pdata->port_mode[1])) {
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->xclk60mhsp2_ck);
+			if (ret != 0) {
+				dev_err(dev, "xclk60mhsp1_ck set parent"
+					"failed error:%d\n", ret);
+				goto err_tll;
+			}
+		} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->init_60m_fclk);
+			if (ret != 0) {
+				dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+				goto err_tll;
+			}
+			clk_enable(omap->usbhost_p2_fck);
+			clk_enable(omap->usbtll_p2_fck);
+		}
+
+		clk_enable(omap->utmi_p1_fck);
+		clk_enable(omap->utmi_p2_fck);
+
+		if (is_ehci_tll_mode(pdata->port_mode[0]) ||
+			(is_ohci_port(pdata->port_mode[0])))
+			reg |= OMAP4_P1_MODE_TLL;
+		else if (is_ehci_hsic_mode(pdata->port_mode[0]))
+			reg |= OMAP4_P1_MODE_HSIC;
+
+		if (is_ehci_tll_mode(pdata->port_mode[1]) ||
+			(is_ohci_port(pdata->port_mode[1])))
+			reg |= OMAP4_P2_MODE_TLL;
+		else if (is_ehci_hsic_mode(pdata->port_mode[1]))
+			reg |= OMAP4_P2_MODE_HSIC;
+	}
+
+	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
+	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
+
+	if (is_ehci_tll_mode(pdata->port_mode[0]) ||
+		is_ehci_tll_mode(pdata->port_mode[1]) ||
+		is_ehci_tll_mode(pdata->port_mode[2]) ||
+		(is_ohci_port(pdata->port_mode[0])) ||
+		(is_ohci_port(pdata->port_mode[1])) ||
+		(is_ohci_port(pdata->port_mode[2]))) {
+
+		/* Enable UTMI mode for required TLL channels */
+		if (is_omap_usbhs_rev2(omap))
+			usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
+		else
+			usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
+	}
+
+	if (pdata->ehci_data->phy_reset) {
+		/* Hold the PHY in RESET for enough time till
+		 * PHY is settled and ready
+		 */
+		udelay(10);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_set_value
+				(pdata->ehci_data->reset_gpio_port[0], 0);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_set_value
+				(pdata->ehci_data->reset_gpio_port[1], 0);
+	}
+
+end_count:
+	omap->count++;
+	goto end_enable;
+
+err_tll:
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	}
+
+	clk_disable(omap->usbtll_ick);
+	clk_disable(omap->usbtll_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_disable(omap->usbhost_ick);
+
+end_enable:
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return ret;
+}
+
+static void usbhs_disable(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags = 0;
+	unsigned long			timeout;
+
+	dev_dbg(dev, "stopping TI HSUSB Controller\n");
+
+	spin_lock_irqsave(&omap->lock, flags);
+
+	if (omap->count == 0)
+		goto end_disble;
+
+	omap->count--;
+
+	if (omap->count != 0)
+		goto end_disble;
+
+	/* Reset OMAP modules for insmod/rmmod to work */
+	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			is_omap_usbhs_rev2(omap) ?
+			OMAP4_UHH_SYSCONFIG_SOFTRESET :
+			OMAP_UHH_SYSCONFIG_SOFTRESET);
+
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 1))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& (1 << 2))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
+
+	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(dev, "operation timed out\n");
+	}
+
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	}
+
+	clk_disable(omap->utmi_p2_fck);
+	clk_disable(omap->utmi_p1_fck);
+	clk_disable(omap->usbtll_ick);
+	clk_disable(omap->usbtll_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_disable(omap->usbhost_ick);
+
+end_disble:
+	spin_unlock_irqrestore(&omap->lock, flags);
+}
+
+int omap_usbhs_enable(struct device *dev)
+{
+	return  usbhs_enable(dev->parent);
+}
+EXPORT_SYMBOL_GPL(omap_usbhs_enable);
+
+void omap_usbhs_disable(struct device *dev)
+{
+	usbhs_disable(dev->parent);
+}
+EXPORT_SYMBOL_GPL(omap_usbhs_disable);
+
+static struct platform_driver usbhs_omap_driver = {
+	.driver = {
+		.name		= (char *)usbhs_driver_name,
+		.owner		= THIS_MODULE,
+	},
+	.remove		= __exit_p(usbhs_omap_remove),
+};
+
+MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
+
+static int __init omap_usbhs_drvinit(void)
+{
+	return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
+}
+
+/*
+ * init before ehci and ohci drivers;
+ * The usbhs core driver should be initialized much before
+ * the omap ehci and ohci probe functions are called.
+ */
+fs_initcall(omap_usbhs_drvinit);
+
+static void __exit omap_usbhs_drvexit(void)
+{
+	platform_driver_unregister(&usbhs_omap_driver);
+}
+module_exit(omap_usbhs_drvexit);