summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap/common.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/arm/mach-omap/common.c
downloadconfigs-2.6.12-rc2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/arm/mach-omap/common.c')
-rw-r--r--arch/arm/mach-omap/common.c549
1 files changed, 549 insertions, 0 deletions
diff --git a/arch/arm/mach-omap/common.c b/arch/arm/mach-omap/common.c
new file mode 100644
index 00000000000..265cde48586
--- /dev/null
+++ b/arch/arm/mach-omap/common.c
@@ -0,0 +1,549 @@
+/*
+ * linux/arch/arm/mach-omap/common.c
+ *
+ * Code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/console.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/clock.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+
+#include "clock.h"
+
+#define DEBUG 1
+
+struct omap_id {
+ u16 jtag_id; /* Used to determine OMAP type */
+ u8 die_rev; /* Processor revision */
+ u32 omap_id; /* OMAP revision */
+ u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+ { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
+ { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+ { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
+ { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
+ { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
+ { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
+ { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
+ { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+ { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+ { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
+ { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
+ { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
+ { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
+ { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
+ { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
+ { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
+ { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
+ { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
+};
+
+/*
+ * Get OMAP type from PROD_ID.
+ * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
+ * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
+ * Undocumented register in TEST BLOCK is used as fallback; This seems to
+ * work on 1510, 1610 & 1710. The official way hopefully will work in future
+ * processors.
+ */
+static u16 __init omap_get_jtag_id(void)
+{
+ u32 prod_id, omap_id;
+
+ prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
+ omap_id = omap_readl(OMAP32_ID_1);
+
+ /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+ if (((prod_id >> 20) == 0) || (prod_id == omap_id))
+ prod_id = 0;
+ else
+ prod_id &= 0xffff;
+
+ if (prod_id)
+ return prod_id;
+
+ /* Use OMAP32_ID_1 as fallback */
+ prod_id = ((omap_id >> 12) & 0xffff);
+
+ return prod_id;
+}
+
+/*
+ * Get OMAP revision from DIE_REV.
+ * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
+ * Undocumented register in the TEST BLOCK is used as fallback.
+ * REVISIT: This does not seem to work on 1510
+ */
+static u8 __init omap_get_die_rev(void)
+{
+ u32 die_rev;
+
+ die_rev = omap_readl(OMAP_DIE_ID_1);
+
+ /* Check for broken OMAP_DIE_ID on early 1710 */
+ if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
+ die_rev = 0;
+
+ die_rev = (die_rev >> 17) & 0xf;
+ if (die_rev)
+ return die_rev;
+
+ die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
+
+ return die_rev;
+}
+
+static void __init omap_check_revision(void)
+{
+ int i;
+ u16 jtag_id;
+ u8 die_rev;
+ u32 omap_id;
+ u8 cpu_type;
+
+ jtag_id = omap_get_jtag_id();
+ die_rev = omap_get_die_rev();
+ omap_id = omap_readl(OMAP32_ID_0);
+
+#ifdef DEBUG
+ printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+ printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+ omap_readl(OMAP_DIE_ID_1),
+ (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
+ printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
+ printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+ omap_readl(OMAP_PRODUCTION_ID_1),
+ omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
+ printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+ printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+ printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+#endif
+
+ system_serial_high = omap_readl(OMAP_DIE_ID_0);
+ system_serial_low = omap_readl(OMAP_DIE_ID_1);
+
+ /* First check only the major version in a safe way */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == (omap_ids[i].jtag_id)) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Check if we can find the die revision */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Finally check also the omap_id */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == omap_ids[i].jtag_id
+ && die_rev == omap_ids[i].die_rev
+ && omap_id == omap_ids[i].omap_id) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
+ cpu_type = system_rev >> 24;
+
+ switch (cpu_type) {
+ case 0x07:
+ system_rev |= 0x07;
+ break;
+ case 0x15:
+ system_rev |= 0x15;
+ break;
+ case 0x16:
+ case 0x17:
+ system_rev |= 0x16;
+ break;
+ case 0x24:
+ system_rev |= 0x24;
+ break;
+ default:
+ printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+ }
+
+ printk("OMAP%04x", system_rev >> 16);
+ if ((system_rev >> 8) & 0xff)
+ printk("%x", (system_rev >> 8) & 0xff);
+ printk(" revision %i handled as %02xxx id: %08x%08x\n",
+ die_rev, system_rev & 0xff, system_serial_low,
+ system_serial_high);
+}
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP I/O mapping
+ *
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ * ----------------------------------------------------------------------------
+ */
+
+static struct map_desc omap_io_desc[] __initdata = {
+ { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static struct map_desc omap730_io_desc[] __initdata = {
+ { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE },
+ { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+ { OMAP730_SRAM_BASE, OMAP730_SRAM_START, OMAP730_SRAM_SIZE, MT_DEVICE }
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct map_desc omap1510_io_desc[] __initdata = {
+ { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE },
+ { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+ { OMAP1510_SRAM_BASE, OMAP1510_SRAM_START, OMAP1510_SRAM_SIZE, MT_DEVICE }
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct map_desc omap1610_io_desc[] __initdata = {
+ { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
+ { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+ { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP1610_SRAM_SIZE, MT_DEVICE }
+};
+
+static struct map_desc omap5912_io_desc[] __initdata = {
+ { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
+ { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+/*
+ * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
+ * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
+ * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
+ * can be used.
+ */
+ { OMAP16XX_SRAM_BASE, OMAP16XX_SRAM_START, OMAP5912_SRAM_SIZE + 0x800, MT_DEVICE }
+};
+#endif
+
+static int initialized = 0;
+
+static void __init _omap_map_io(void)
+{
+ initialized = 1;
+
+ /* We have to initialize the IO space mapping before we can run
+ * cpu_is_omapxxx() macros. */
+ iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+ omap_check_revision();
+
+#ifdef CONFIG_ARCH_OMAP730
+ if (cpu_is_omap730()) {
+ iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+ }
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+ if (cpu_is_omap1610() || cpu_is_omap1710()) {
+ iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
+ }
+ if (cpu_is_omap5912()) {
+ iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
+ }
+#endif
+
+ /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
+ * on a Posted Write in the TIPB Bridge".
+ */
+ omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
+ omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
+
+ /* Must init clocks early to assure that timer interrupt works
+ */
+ clk_init();
+}
+
+/*
+ * This should only get called from board specific init
+ */
+void omap_map_io(void)
+{
+ if (!initialized)
+ _omap_map_io();
+}
+
+static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
+ int value)
+{
+ offset <<= p->regshift;
+ __raw_writeb(value, p->membase + offset);
+}
+
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+ omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */
+ omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */
+ omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */
+
+ if (!cpu_is_omap1510()) {
+ omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
+ while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
+ }
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = (char*)IO_ADDRESS(OMAP_UART1_BASE),
+ .mapbase = (unsigned long)OMAP_UART1_BASE,
+ .irq = INT_UART1,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ {
+ .membase = (char*)IO_ADDRESS(OMAP_UART2_BASE),
+ .mapbase = (unsigned long)OMAP_UART2_BASE,
+ .irq = INT_UART2,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ {
+ .membase = (char*)IO_ADDRESS(OMAP_UART3_BASE),
+ .mapbase = (unsigned long)OMAP_UART3_BASE,
+ .irq = INT_UART3,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = OMAP16XX_BASE_BAUD * 16,
+ },
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+/*
+ * Note that on Innovator-1510 UART2 pins conflict with USB2.
+ * By default UART2 does not work on Innovator-1510 if you have
+ * USB OHCI enabled. To use UART2, you must disable USB2 first.
+ */
+void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
+{
+ int i;
+
+ if (cpu_is_omap730()) {
+ serial_platform_data[0].regshift = 0;
+ serial_platform_data[1].regshift = 0;
+ serial_platform_data[0].irq = INT_730_UART_MODEM_1;
+ serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
+ }
+
+ if (cpu_is_omap1510()) {
+ serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
+ serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
+ serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
+ }
+
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+ unsigned char reg;
+
+ if (ports[i] == 0) {
+ serial_platform_data[i].membase = 0;
+ serial_platform_data[i].mapbase = 0;
+ continue;
+ }
+
+ switch (i) {
+ case 0:
+ if (cpu_is_omap1510()) {
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ if (machine_is_omap_innovator()) {
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM1_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+ }
+ }
+ break;
+ case 1:
+ if (cpu_is_omap1510()) {
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ if (machine_is_omap_innovator()) {
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM2_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+ }
+ }
+ break;
+ case 2:
+ if (cpu_is_omap1510()) {
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+ }
+ if (cpu_is_omap1710()) {
+ clk_enable(clk_get(0, "uart3_ck"));
+ }
+ break;
+ }
+ omap_serial_reset(&serial_platform_data[i]);
+ }
+}
+
+static int __init omap_init(void)
+{
+ return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);
+
+#define NO_LENGTH_CHECK 0xffffffff
+
+extern int omap_bootloader_tag_len;
+extern u8 omap_bootloader_tag[];
+
+struct omap_board_config_kernel *omap_board_config;
+int omap_board_config_size = 0;
+
+static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
+{
+ struct omap_board_config_kernel *kinfo = NULL;
+ int i;
+
+#ifdef CONFIG_OMAP_BOOT_TAG
+ struct omap_board_config_entry *info = NULL;
+
+ if (omap_bootloader_tag_len > 4)
+ info = (struct omap_board_config_entry *) omap_bootloader_tag;
+ while (info != NULL) {
+ u8 *next;
+
+ if (info->tag == tag) {
+ if (skip == 0)
+ break;
+ skip--;
+ }
+
+ if ((info->len & 0x03) != 0) {
+ /* We bail out to avoid an alignment fault */
+ printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
+ info->len, info->tag);
+ return NULL;
+ }
+ next = (u8 *) info + sizeof(*info) + info->len;
+ if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
+ info = NULL;
+ else
+ info = (struct omap_board_config_entry *) next;
+ }
+ if (info != NULL) {
+ /* Check the length as a lame attempt to check for
+ * binary inconsistancy. */
+ if (len != NO_LENGTH_CHECK) {
+ /* Word-align len */
+ if (len & 0x03)
+ len = (len + 3) & ~0x03;
+ if (info->len != len) {
+ printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
+ tag, len, info->len);
+ return NULL;
+ }
+ }
+ if (len_out != NULL)
+ *len_out = info->len;
+ return info->data;
+ }
+#endif
+ /* Try to find the config from the board-specific structures
+ * in the kernel. */
+ for (i = 0; i < omap_board_config_size; i++) {
+ if (omap_board_config[i].tag == tag) {
+ kinfo = &omap_board_config[i];
+ break;
+ }
+ }
+ if (kinfo == NULL)
+ return NULL;
+ return kinfo->data;
+}
+
+const void *__omap_get_config(u16 tag, size_t len, int nr)
+{
+ return get_config(tag, len, nr, NULL);
+}
+EXPORT_SYMBOL(__omap_get_config);
+
+const void *omap_get_var_config(u16 tag, size_t *len)
+{
+ return get_config(tag, NO_LENGTH_CHECK, 0, len);
+}
+EXPORT_SYMBOL(omap_get_var_config);
+
+static int __init omap_add_serial_console(void)
+{
+ const struct omap_uart_config *info;
+
+ info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
+ if (info != NULL && info->console_uart) {
+ static char speed[11], *opt = NULL;
+
+ if (info->console_speed) {
+ snprintf(speed, sizeof(speed), "%u", info->console_speed);
+ opt = speed;
+ }
+ return add_preferred_console("ttyS", info->console_uart - 1, opt);
+ }
+ return 0;
+}
+console_initcall(omap_add_serial_console);