diff options
Diffstat (limited to 'template/en/default/setup/strings.txt.pl')
-rw-r--r-- | template/en/default/setup/strings.txt.pl | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/template/en/default/setup/strings.txt.pl b/template/en/default/setup/strings.txt.pl new file mode 100644 index 0000000..d134ef4 --- /dev/null +++ b/template/en/default/setup/strings.txt.pl @@ -0,0 +1,417 @@ +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# This Source Code Form is "Incompatible With Secondary Licenses", as +# defined by the Mozilla Public License, v. 2.0. + +# This file contains a single hash named %strings, which is used by the +# installation code to display strings before Template-Toolkit can safely +# be loaded. +# +# Each string supports a very simple substitution system, where you can +# have variables named like ##this## and they'll be replaced by the string +# variable with that name. +# +# Please keep the strings in alphabetical order by their name. + +%strings = ( + any => 'any', + apachectl_failed => <<END, +WARNING: We could not check the configuration of Apache. This sometimes +happens when you are not running checksetup.pl as ##root##. To see the +problem we ran into, run: ##command## +END + bad_executable => 'not a valid executable: ##bin##', + blacklisted => '(blacklisted)', + bz_schema_exists_before_220 => <<'END', +You are upgrading from a version before 2.20, but the bz_schema table +already exists. This means that you restored a mysqldump into the Bugzilla +database without first dropping the already-existing Bugzilla database, +at some point. Whenever you restore a Bugzilla database backup, you must +always drop the entire database first. + +Please drop your Bugzilla database and restore it from a backup that does +not contain the bz_schema table. If for some reason you cannot do this, you +can connect to your MySQL database and drop the bz_schema table, as a last +resort. +END + checking_for => 'Checking for', + checking_dbd => 'Checking available perl DBD modules...', + checking_optional => 'The following Perl modules are optional:', + checking_modules => 'Checking perl modules...', + chmod_failed => '##path##: Failed to change permissions: ##error##', + chown_failed => '##path##: Failed to change ownership: ##error##', + commands_dbd => <<EOT, +YOU MUST RUN ONE OF THE FOLLOWING COMMANDS (depending on which database +you use): +EOT + commands_optional => 'COMMANDS TO INSTALL OPTIONAL MODULES:', + commands_required => <<EOT, +COMMANDS TO INSTALL REQUIRED MODULES (You *must* run all these commands +and then re-run checksetup.pl): +EOT + continue_without_answers => <<'END', +Re-run checksetup.pl in interactive mode (without an 'answers' file) +to continue. +END + cpan_bugzilla_home => + "WARNING: Using the Bugzilla directory as the CPAN home.", + db_enum_setup => "Setting up choices for standard drop-down fields:", + db_schema_init => "Initializing bz_schema...", + db_table_new => "Adding new table ##table##...", + db_table_setup => "Creating tables...", + done => 'done.', + enter_or_ctrl_c => "Press Enter to continue or Ctrl-C to exit...", + error_localconfig_read => <<'END', +An error has occurred while reading the ##localconfig## file. The text of +the error message is: + +##error## + +Please fix the error in the localconfig file. Alternately, rename your +localconfig file and re-run checksetup.pl to have it create a new +localconfig file: + + $ mv -f localconfig localconfig.old + $ ./checksetup.pl +END + extension_must_return_name => <<END, +##file## returned ##returned##, which is not a valid name for an extension. +Extensions must return their name, not <code>1</code> or a number. See +the documentation of Bugzilla::Extension for details. +END + feature_auth_ldap => 'LDAP Authentication', + feature_auth_radius => 'RADIUS Authentication', + feature_graphical_reports => 'Graphical Reports', + feature_html_desc => 'More HTML in Product/Group Descriptions', + feature_inbound_email => 'Inbound Email', + feature_jobqueue => 'Mail Queueing', + feature_jsonrpc => 'JSON-RPC Interface', + feature_jsonrpc_faster => 'Make JSON-RPC Faster', + feature_new_charts => 'New Charts', + feature_old_charts => 'Old Charts', + feature_mod_perl => 'mod_perl', + feature_moving => 'Move Bugs Between Installations', + feature_patch_viewer => 'Patch Viewer', + feature_smtp_auth => 'SMTP Authentication', + feature_smtp_ssl => 'SSL Support for SMTP', + feature_updates => 'Automatic Update Notifications', + feature_xmlrpc => 'XML-RPC Interface', + feature_detect_charset => 'Automatic charset detection for text attachments', + feature_typesniffer => 'Sniff MIME type of attachments', + + file_remove => 'Removing ##name##...', + file_rename => 'Renaming ##from## to ##to##...', + header => "* This is Bugzilla ##bz_ver## on perl ##perl_ver##\n" + . "* Running on ##os_name## ##os_ver##", + install_all => <<EOT, + +To attempt an automatic install of every required and optional module +with one command, do: + + ##perl## install-module.pl --all + +EOT + install_data_too_long => <<EOT, +WARNING: Some of the data in the ##table##.##column## column is longer than +its new length limit of ##max_length## characters. The data that needs to be +fixed is printed below with the value of the ##id_column## column first and +then the value of the ##column## column that needs to be fixed: + +EOT + install_module => 'Installing ##module## version ##version##...', + installation_failed => '*** Installation aborted. Read the messages above. ***', + install_no_compiler => <<END, +ERROR: Using install-module.pl requires that you install a compiler, such as +gcc. +END + install_no_make => <<END, +ERROR: Using install-module.pl requires that you install "make". +END + lc_new_vars => <<'END', +This version of Bugzilla contains some variables that you may want to +change and adapt to your local settings. The following variables are +new to ##localconfig## since you last ran checksetup.pl: + +##new_vars## + +Please edit the file ##localconfig## and then re-run checksetup.pl +to complete your installation. +END + lc_old_vars => <<'END', +The following variables are no longer used in ##localconfig##, and +have been moved to ##old_file##: ##vars## +END + localconfig_create_htaccess => <<'END', +If you are using Apache as your web server, Bugzilla can create .htaccess +files for you, which will keep this file (localconfig) and other +confidential files from being read over the web. + +If this is set to 1, checksetup.pl will create .htaccess files if +they don't exist. + +If this is set to 0, checksetup.pl will not create .htaccess files. +END + localconfig_cvsbin => <<'END', +If you want to use the CVS integration of the Patch Viewer, please specify +the full path to the "cvs" executable here. +END + localconfig_db_check => <<'END', +Should checksetup.pl try to verify that your database setup is correct? +With some combinations of database servers/Perl modules/moonphase this +doesn't work, and so you can try setting this to 0 to make checksetup.pl +run. +END + localconfig_db_driver => <<'END', +What SQL database to use. Default is mysql. List of supported databases +can be obtained by listing Bugzilla/DB directory - every module corresponds +to one supported database and the name of the module (before ".pm") +corresponds to a valid value for this variable. +END + localconfig_db_host => <<'END', +The DNS name or IP address of the host that the database server runs on. +END + localconfig_db_name => <<'END', +The name of the database. For Oracle, this is the database's SID. For +SQLite, this is a name (or path) for the DB file. +END + localconfig_db_pass => <<'END', +Enter your database password here. It's normally advisable to specify +a password for your bugzilla database user. +If you use apostrophe (') or a backslash (\) in your password, you'll +need to escape it by preceding it with a '\' character. (\') or (\) +(It is far simpler to just not use those characters.) +END + localconfig_db_port => <<'END', +Sometimes the database server is running on a non-standard port. If that's +the case for your database server, set this to the port number that your +database server is running on. Setting this to 0 means "use the default +port for my database server." +END + localconfig_db_sock => <<'END', +MySQL Only: Enter a path to the unix socket for MySQL. If this is +blank, then MySQL's compiled-in default will be used. You probably +want that. +END + localconfig_db_user => "Who we connect to the database as.", + localconfig_diffpath => <<'END', +For the "Difference Between Two Patches" feature to work, we need to know +what directory the "diff" bin is in. (You only need to set this if you +are using that feature of the Patch Viewer.) +END + localconfig_index_html => <<'END', +Most web servers will allow you to use index.cgi as a directory +index, and many come preconfigured that way, but if yours doesn't +then you'll need an index.html file that provides redirection +to index.cgi. Setting $index_html to 1 below will allow +checksetup.pl to create an index.html for you if it doesn't exist. +NOTE: checksetup.pl will not replace an existing file, so if you + wish to have checksetup.pl create one for you, you must + make sure that index.html doesn't already exist. +END + localconfig_interdiffbin => <<'END', +If you want to use the "Difference Between Two Patches" feature of the +Patch Viewer, please specify the full path to the "interdiff" executable +here. +END + localconfig_site_wide_secret => <<'END', +This secret key is used by your installation for the creation and +validation of encrypted tokens. These tokens are used to implement +security features in Bugzilla, to protect against certain types of attacks. +A random string is generated by default. It's very important that this key +is kept secret. It also must be very long. +END + localconfig_use_suexec => <<'END', +Set this to 1 if Bugzilla runs in an Apache SuexecUserGroup environment. + +If your web server runs control panel software (cPanel, Plesk or similar), +or if your Bugzilla is to run in a shared hosting environment, then you are +almost certainly in an Apache SuexecUserGroup environment. + +If this is a Windows box, ignore this setting, as it does nothing. + +If set to 0, checksetup.pl will set file permissions appropriately for +a normal webserver environment. + +If set to 1, checksetup.pl will set file permissions so that Bugzilla +works in a SuexecUserGroup environment. +END + localconfig_webservergroup => <<'END', +The name of the group that your web server runs as. On Red Hat +distributions, this is usually "apache". On Debian/Ubuntu, it is +usually "www-data". + +If you have use_suexec turned on below, then this is instead the name +of the group that your web server switches to to run cgi files. + +If this is a Windows machine, ignore this setting, as it does nothing. + +If you do not have access to the group your scripts will run under, +set this to "". If you do set this to "", then your Bugzilla installation +will be _VERY_ insecure, because some files will be world readable/writable, +and so anyone who can get local access to your machine can do whatever they +want. You should only have this set to "" if this is a testing installation +and you cannot set this up any other way. YOU HAVE BEEN WARNED! + +If you set this to anything other than "", you will need to run checksetup.pl +as ##root## or as a user who is a member of the specified group. +END + max_allowed_packet => <<EOT, +WARNING: You need to set the max_allowed_packet parameter in your MySQL +configuration to at least ##needed##. Currently it is set to ##current##. +You can set this parameter in the [mysqld] section of your MySQL +configuration file. +EOT + min_version_required => "Minimum version required: ", + +# Note: When translating these "modules" messages, don't change the formatting +# if possible, because there is hardcoded formatting in +# Bugzilla::Install::Requirements to match the box formatting. + modules_message_apache => <<END, +*********************************************************************** +* APACHE MODULES * +*********************************************************************** +* Normally, when Bugzilla is upgraded, all Bugzilla users have to * +* clear their browser cache or Bugzilla will break. If you enable * +* certain modules in your Apache configuration (usually called * +* httpd.conf or apache2.conf) then your users will not have to clear * +* their caches when you upgrade Bugzilla. The modules you need to * +* enable are: * +* * +END + modules_message_db => <<EOT, +*********************************************************************** +* DATABASE ACCESS * +*********************************************************************** +* In order to access your database, Bugzilla requires that the * +* correct "DBD" module be installed for the database that you are * +* running. See below for the correct command to run to install the * +* appropriate module for your database. * +EOT + modules_message_optional => <<EOT, +*********************************************************************** +* OPTIONAL MODULES * +*********************************************************************** +* Certain Perl modules are not required by Bugzilla, but by * +* installing the latest version you gain access to additional * +* features. * +* * +* The optional modules you do not have installed are listed below, * +* with the name of the feature they enable. Below that table are the * +* commands to install each module. * +EOT + modules_message_required => <<EOT, +*********************************************************************** +* REQUIRED MODULES * +*********************************************************************** +* Bugzilla requires you to install some Perl modules which are either * +* missing from your system, or the version on your system is too old. * +* See below for commands to install these modules. * +EOT + + module_found => "found v##ver##", + module_not_found => "not found", + module_ok => 'ok', + module_unknown_version => "found unknown version", + no_such_module => "There is no Perl module on CPAN named ##module##.", + mysql_innodb_disabled => <<'END', +InnoDB is disabled in your MySQL installation. +Bugzilla requires InnoDB to be enabled. +Please enable it and then re-run checksetup.pl. +END + mysql_index_renaming => <<'END', +We are about to rename old indexes. The estimated time to complete +renaming is ##minutes## minutes. You cannot interrupt this action once +it has begun. If you would like to cancel, press Ctrl-C now... +(Waiting 45 seconds...) +END + mysql_utf8_conversion => <<'END', +WARNING: We are about to convert your table storage format to UTF-8. This + allows Bugzilla to correctly store and sort international characters. + However, if you have any non-UTF-8 data in your database, + it ***WILL BE DELETED*** by this process. So, before + you continue with checksetup.pl, if you have any non-UTF-8 + data (or even if you're not sure) you should press Ctrl-C now + to interrupt checksetup.pl, and run contrib/recode.pl to make all + the data in your database into UTF-8. You should also back up your + database before continuing. This will affect every single table + in the database, even non-Bugzilla tables. + + If you ever used a version of Bugzilla before 2.22, we STRONGLY + recommend that you stop checksetup.pl NOW and run contrib/recode.pl. +END + no_checksetup_from_cgi => <<END, +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" + "http://www.w3.org/TR/html4/strict.dtd"> +<html> + <head> + <title>checksetup.pl cannot run from a web browser</title> + </head> + + <body> + <h1>checksetup.pl cannot run from a web browser</h1> + <p> + You <b>must not</b> execute this script from your web browser. + To install or upgrade Bugzilla, run this script from + the command-line (e.g. <tt>bash</tt> or <tt>ssh</tt> on Linux + or <tt>cmd.exe</tt> on Windows), and follow instructions given there. + </p> + + <p> + For more information on how to install Bugzilla, please + <a href="http://www.bugzilla.org/docs/">read the documentation</a> + available on the official Bugzilla website. + </p> + </body> +</html> +END + patchutils_missing => <<'END', +OPTIONAL NOTE: If you want to be able to use the 'difference between two +patches' feature of Bugzilla (which requires the PatchReader Perl module +as well), you should install patchutils from: + + http://cyberelk.net/tim/patchutils/ +END + template_precompile => "Precompiling templates...", + template_removal_failed => <<END, +WARNING: The directory '##template_cache##' could not be removed. + It has been moved into '##deleteme##', which should be + deleted manually to conserve disk space. +END + template_removing_dir => "Removing existing compiled templates...", + update_cf_invalid_name => + "Removing custom field '##field##', because it has an invalid name...", + update_flags_bad_name => <<'END', +"##flag##" is not a valid name for a flag. Rename it to not have any spaces +or commas. +END + update_nomail_bad => <<'END', +WARNING: The following users were listed in ##data##/nomail, but do +not have an account here. The unmatched entries have been moved to +##data##/nomail.bad: +END + update_summary_truncate_comment => + "The original value of the Summary field was longer than 255" + . " characters, and so it was truncated during an upgrade." + . " The original summary was:\n\n##summary##", + update_summary_truncated => <<'END', +WARNING: Some of your bugs had summaries longer than 255 characters. +They have had their original summary copied into a comment, and then +the summary was truncated to 255 characters. The affected bug numbers were: +END + update_quips => <<'END', +Quips are now stored in the database, rather than in an external file. +The quips previously stored in ##data##/comments have been copied into +the database, and that file has been renamed to ##data##/comments.bak +You may delete the renamed file once you have confirmed that all your +quips were moved successfully. +END + update_queries_to_tags => "Populating the new 'tag' table:", + webdot_bad_htaccess => <<END, +WARNING: Dependency graph images are not accessible. +Delete ##dir##/.htaccess and re-run checksetup.pl. +END +); + +1; |