path: root/drivers/staging/comedi/drivers/adl_pci9118.c

/*
 *  comedi/drivers/adl_pci9118.c
 *
 *  hardware driver for ADLink cards:
 *   card:   PCI-9118DG, PCI-9118HG, PCI-9118HR
 *   driver: pci9118dg,  pci9118hg,  pci9118hr
 *
 * Author: Michal Dobes <dobes@tesnet.cz>
 *
*/
/*
Driver: adl_pci9118
Description: Adlink PCI-9118DG, PCI-9118HG, PCI-9118HR
Author: Michal Dobes <dobes@tesnet.cz>
Devices: [ADLink] PCI-9118DG (pci9118dg), PCI-9118HG (pci9118hg),
  PCI-9118HR (pci9118hr)
Status: works

This driver supports AI, AO, DI and DO subdevices.
AI subdevice supports cmd and insn interface,
other subdevices support only insn interface.
For AI:
- If cmd->scan_begin_src=TRIG_EXT then trigger input is TGIN (pin 46).
- If cmd->convert_src=TRIG_EXT then trigger input is EXTTRG (pin 44).
- If cmd->start_src/stop_src=TRIG_EXT then trigger input is TGIN (pin 46).
- It is not necessary to have cmd.scan_end_arg=cmd.chanlist_len but
  cmd.scan_end_arg modulo cmd.chanlist_len must by 0.
- If return value of cmdtest is 5 then you've bad channel list
  (it isn't possible mixture S.E. and DIFF inputs or bipolar and unipolar
  ranges).

There are some hardware limitations:
a) You cann't use mixture of unipolar/bipoar ranges or differencial/single
   ended inputs.
b) DMA transfers must have the length aligned to two samples (32 bit),
   so there is some problems if cmd->chanlist_len is odd. This driver tries
   bypass this with adding one sample to the end of the every scan and discard
   it on output but this cann't be used if cmd->scan_begin_src=TRIG_FOLLOW
   and is used flag TRIG_WAKE_EOS, then driver switch to interrupt driven mode
   with interrupt after every sample.
c) If isn't used DMA then you can use only mode where
   cmd->scan_begin_src=TRIG_FOLLOW.

Configuration options:
  [0] - PCI bus of device (optional)
  [1] - PCI slot of device (optional)
	If bus/slot is not specified, then first available PCI
	card will be used.
  [2] - 0= standard 8 DIFF/16 SE channels configuration
	n = external multiplexer connected, 1 <= n <= 256
  [3] - 0=autoselect DMA or EOC interrupts operation
	1 = disable DMA mode
	3 = disable DMA and INT, only insn interface will work
  [4] - sample&hold signal - card can generate signal for external S&H board
	0 = use SSHO(pin 45) signal is generated in onboard hardware S&H logic
	0 != use ADCHN7(pin 23) signal is generated from driver, number say how
		long delay is requested in ns and sign polarity of the hold
		(in this case external multiplexor can serve only 128 channels)
  [5] - 0=stop measure on all hardware errors
	2 | = ignore ADOR - A/D Overrun status
	8|=ignore Bover - A/D Burst Mode Overrun status
	256|=ignore nFull - A/D FIFO Full status

*/
#include "../comedidev.h"

#include <linux/delay.h>
#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/io.h>

#include "amcc_s5933.h"
#include "8253.h"
#include "comedi_pci.h"
#include "comedi_fc.h"

#define PCI_VENDOR_ID_AMCC	0x10e8

/* paranoid checks are broken */
#undef PCI9118_PARANOIDCHECK	/*
				 * if defined, then is used code which control
				 * correct channel number on every 12 bit sample
				 */

#undef PCI9118_EXTDEBUG		/*
				 * if defined then driver prints
				 * a lot of messages
				 */

#undef DPRINTK
#ifdef PCI9118_EXTDEBUG
#define DPRINTK(fmt, args...) printk(fmt, ## args)
#else
#define DPRINTK(fmt, args...)
#endif

#define IORANGE_9118 	64	/* I hope */
#define PCI9118_CHANLEN	255	/*
				 * len of chanlist, some source say 256,
				 * but reality looks like 255 :-(
				 */

#define PCI9118_CNT0	0x00	/* R/W: 8254 counter 0 */
#define PCI9118_CNT1	0x04	/* R/W: 8254 counter 0 */
#define PCI9118_CNT2	0x08	/* R/W: 8254 counter 0 */
#define PCI9118_CNTCTRL	0x0c	/* W:   8254 counter control */
#define PCI9118_AD_DATA	0x10	/* R:   A/D data */
#define PCI9118_DA1	0x10	/* W:   D/A registers */
#define PCI9118_DA2	0x14
#define PCI9118_ADSTAT	0x18	/* R:   A/D status register */
#define PCI9118_ADCNTRL	0x18	/* W:   A/D control register */
#define PCI9118_DI	0x1c	/* R:   digi input register */
#define PCI9118_DO	0x1c	/* W:   digi output register */
#define PCI9118_SOFTTRG	0x20	/* W:   soft trigger for A/D */
#define PCI9118_GAIN	0x24	/* W:   A/D gain/channel register */
#define PCI9118_BURST	0x28	/* W:   A/D burst number register */
#define PCI9118_SCANMOD	0x2c	/* W:   A/D auto scan mode */
#define PCI9118_ADFUNC	0x30	/* W:   A/D function register */
#define PCI9118_DELFIFO	0x34	/* W:   A/D data FIFO reset */
#define PCI9118_INTSRC	0x38	/* R:   interrupt reason register */
#define PCI9118_INTCTRL	0x38	/* W:   interrupt control register */

/* bits from A/D control register (PCI9118_ADCNTRL) */
#define AdControl_UniP	0x80	/* 1=bipolar, 0=unipolar */
#define AdControl_Diff	0x40	/* 1=differential, 0= single end inputs */
#define AdControl_SoftG	0x20	/* 1=8254 counter works, 0=counter stops */
#define	AdControl_ExtG	0x10	/*
				 * 1=8254 countrol controlled by TGIN(pin 46),
				 * 0=controlled by SoftG
				 */
#define AdControl_ExtM	0x08	/*
				 * 1=external hardware trigger (pin 44),
				 * 0=internal trigger
				 */
#define AdControl_TmrTr	0x04	/*
				 * 1=8254 is iternal trigger source,
				 * 0=software trigger is source
				 * (register PCI9118_SOFTTRG)
				 */
#define AdControl_Int	0x02	/* 1=enable INT, 0=disable */
#define AdControl_Dma	0x01	/* 1=enable DMA, 0=disable */

/* bits from A/D function register (PCI9118_ADFUNC) */
#define AdFunction_PDTrg	0x80	/*
					 * 1=positive,
					 * 0=negative digital trigger
					 * (only positive is correct)
					 */
#define AdFunction_PETrg	0x40	/*
					 * 1=positive,
					 * 0=negative external trigger
					 * (only positive is correct)
					 */
#define AdFunction_BSSH		0x20	/* 1=with sample&hold, 0=without */
#define AdFunction_BM		0x10	/* 1=burst mode, 0=normal mode */
#define AdFunction_BS		0x08	/*
					 * 1=burst mode start,
					 * 0=burst mode stop
					 */
#define AdFunction_PM		0x04	/*
					 * 1=post trigger mode,
					 * 0=not post trigger
					 */
#define AdFunction_AM		0x02	/*
					 * 1=about trigger mode,
					 * 0=not about trigger
					 */
#define AdFunction_Start	0x01	/* 1=trigger start, 0=trigger stop */

/* bits from A/D status register (PCI9118_ADSTAT) */
#define AdStatus_nFull	0x100	/* 0=FIFO full (fatal), 1=not full */
#define AdStatus_nHfull	0x080	/* 0=FIFO half full, 1=FIFO not half full */
#define AdStatus_nEpty	0x040	/* 0=FIFO empty, 1=FIFO not empty */
#define AdStatus_Acmp	0x020	/*  */
#define AdStatus_DTH	0x010	/* 1=external digital trigger */
#define AdStatus_Bover	0x008	/* 1=burst mode overrun (fatal) */
#define AdStatus_ADOS	0x004	/* 1=A/D over speed (warning) */
#define AdStatus_ADOR	0x002	/* 1=A/D overrun (fatal) */
#define AdStatus_ADrdy	0x001	/* 1=A/D already ready, 0=not ready */

/* bits for interrupt reason and control (PCI9118_INTSRC, PCI9118_INTCTRL) */
/* 1=interrupt occur, enable source,  0=interrupt not occur, disable source */
#define Int_Timer	0x08	/* timer interrupt */
#define Int_About	0x04	/* about trigger complete */
#define Int_Hfull	0x02	/* A/D FIFO hlaf full */
#define Int_DTrg	0x01	/* external digital trigger */

#define START_AI_EXT	0x01	/* start measure on external trigger */
#define STOP_AI_EXT	0x02	/* stop measure on external trigger */
#define START_AI_INT	0x04	/* start measure on internal trigger */
#define STOP_AI_INT	0x08	/* stop measure on internal trigger */

#define EXTTRG_AI	0	/* ext trg is used by AI */

static const struct comedi_lrange range_pci9118dg_hr = { 8, {
							     BIP_RANGE(5),
							     BIP_RANGE(2.5),
							     BIP_RANGE(1.25),
							     BIP_RANGE(0.625),
							     UNI_RANGE(10),
							     UNI_RANGE(5),
							     UNI_RANGE(2.5),
							     UNI_RANGE(1.25)
							     }
};

static const struct comedi_lrange range_pci9118hg = { 8, {
							  BIP_RANGE(5),
							  BIP_RANGE(0.5),
							  BIP_RANGE(0.05),
							  BIP_RANGE(0.005),
							  UNI_RANGE(10),
							  UNI_RANGE(1),
							  UNI_RANGE(0.1),
							  UNI_RANGE(0.01)
							  }
};

#define PCI9118_BIPOLAR_RANGES	4	/*
					 * used for test on mixture
					 * of BIP/UNI ranges
					 */

static int pci9118_attach(struct comedi_device *dev,
			  struct comedi_devconfig *it);
static int pci9118_detach(struct comedi_device *dev);

struct boardtype {
	const char *name;		/* board name */
	int vendor_id;			/* PCI vendor a device ID of card */
	int device_id;
	int iorange_amcc;		/* iorange for own S5933 region */
	int iorange_9118;		/* pass thru card region size */
	int n_aichan;			/* num of A/D chans */
	int n_aichand;			/* num of A/D chans in diff mode */
	int mux_aichan;			/*
					 * num of A/D chans with
					 * external multiplexor
					 */
	int n_aichanlist;		/* len of chanlist */
	int n_aochan;			/* num of D/A chans */
	int ai_maxdata;			/* resolution of A/D */
	int ao_maxdata;			/* resolution of D/A */
	const struct comedi_lrange *rangelist_ai;	/* rangelist for A/D */
	const struct comedi_lrange *rangelist_ao;	/* rangelist for D/A */
	unsigned int ai_ns_min;		/* max sample speed of card v ns */
	unsigned int ai_pacer_min;	/*
					 * minimal pacer value
					 * (c1*c2 or c1 in burst)
					 */
	int half_fifo_size;		/* size of FIFO/2 */

};

static DEFINE_PCI_DEVICE_TABLE(pci9118_pci_table) = {
	{ PCI_DEVICE(PCI_VENDOR_ID_AMCC, 0x80d9) },
	{ 0 }
};

MODULE_DEVICE_TABLE(pci, pci9118_pci_table);

static const struct boardtype boardtypes[] = {
	{"pci9118dg", PCI_VENDOR_ID_AMCC, 0x80d9,
	 AMCC_OP_REG_SIZE, IORANGE_9118,
	 16, 8, 256, PCI9118_CHANLEN, 2, 0x0fff, 0x0fff,
	 &range_pci9118dg_hr, &range_bipolar10,
	 3000, 12, 512},
	{"pci9118hg", PCI_VENDOR_ID_AMCC, 0x80d9,
	 AMCC_OP_REG_SIZE, IORANGE_9118,
	 16, 8, 256, PCI9118_CHANLEN, 2, 0x0fff, 0x0fff,
	 &range_pci9118hg, &range_bipolar10,
	 3000, 12, 512},
	{"pci9118hr", PCI_VENDOR_ID_AMCC, 0x80d9,
	 AMCC_OP_REG_SIZE, IORANGE_9118,
	 16, 8, 256, PCI9118_CHANLEN, 2, 0xffff, 0x0fff,
	 &range_pci9118dg_hr, &range_bipolar10,
	 10000, 40, 512},
};

static struct comedi_driver driver_pci9118 = {
	.driver_name = "adl_pci9118",
	.module = THIS_MODULE,
	.attach = pci9118_attach,
	.detach = pci9118_detach,
	.num_names = ARRAY_SIZE(boardtypes),
	.board_name = &boardtypes[0].name,
	.offset = sizeof(struct boardtype),
};

static int __devinit driver_pci9118_pci_probe(struct pci_dev *dev,
					      const struct pci_device_id *ent)
{
	return comedi_pci_auto_config(dev, &driver_pci9118);
}

static void __devexit driver_pci9118_pci_remove(struct pci_dev *dev)
{
	comedi_pci_auto_unconfig(dev);
}

static struct pci_driver driver_pci9118_pci_driver = {
	.id_table = pci9118_pci_table,
	.probe = &driver_pci9118_pci_probe,
	.remove = __devexit_p(&driver_pci9118_pci_remove)
};

static int __init driver_pci9118_init_module(void)
{
	int retval;

	retval = comedi_driver_register(&driver_pci9118);
	if (retval < 0)
		return retval;

	driver_pci9118_pci_driver.name = (char *)driver_pci9118.driver_name;
	return pci_register_driver(&driver_pci9118_pci_driver);
}

static void __exit driver_pci9118_cleanup_module(void)
{
	pci_unregister_driver(&driver_pci9118_pci_driver);
	comedi_driver_unregister(&driver_pci9118);
}

module_init(driver_pci9118_init_module);
module_exit(driver_pci9118_cleanup_module);

struct pci9118_private {
	unsigned long iobase_a;	/* base+size for AMCC chip */
	unsigned int master;	/* master capable */
	struct pci_dev *pcidev;	/* ptr to actual pcidev */
	unsigned int usemux;	/* we want to use external multiplexor! */
#ifdef PCI9118_PARANOIDCHECK
	unsigned short chanlist[PCI9118_CHANLEN + 1];	/*
							 * list of
							 * scanned channel
							 */
	unsigned char chanlistlen;	/* number of scanlist */
#endif
	unsigned char AdControlReg;	/* A/D control register */
	unsigned char IntControlReg;	/* Interrupt control register */
	unsigned char AdFunctionReg;	/* A/D function register */
	char valid;			/* driver is ok */
	char ai_neverending;		/* we do unlimited AI */
	unsigned int i8254_osc_base;	/* frequence of onboard oscilator */
	unsigned int ai_do;		/* what do AI? 0=nothing, 1 to 4 mode */
	unsigned int ai_act_scan;	/* how many scans we finished */
	unsigned int ai_buf_ptr;	/* data buffer ptr in samples */
	unsigned int ai_n_chan;		/* how many channels is measured */
	unsigned int ai_n_scanlen;	/* len of actual scanlist */
	unsigned int ai_n_realscanlen;	/*
					 * what we must transfer for one
					 * outgoing scan include front/back adds
					 */
	unsigned int ai_act_dmapos;	/* position in actual real stream */
	unsigned int ai_add_front;	/*
					 * how many channels we must add
					 * before scan to satisfy S&H?
					 */
	unsigned int ai_add_back;	/*
					 * how many channels we must add
					 * before scan to satisfy DMA?
					 */
	unsigned int *ai_chanlist;	/* actual chanlist */
	unsigned int ai_timer1;
	unsigned int ai_timer2;
	unsigned int ai_flags;
	char ai12_startstop;		/*
					 * measure can start/stop
					 * on external trigger
					 */
	unsigned int ai_divisor1, ai_divisor2;	/*
						 * divisors for start of measure
						 * on external start
						 */
	unsigned int ai_data_len;
	short *ai_data;
	short ao_data[2];			/* data output buffer */
	unsigned int ai_scans;			/* number of scans to do */
	char dma_doublebuf;			/* we can use double buffring */
	unsigned int dma_actbuf;		/* which buffer is used now */
	short *dmabuf_virt[2];			/*
						 * pointers to begin of
						 * DMA buffer
						 */
	unsigned long dmabuf_hw[2];		/* hw address of DMA buff */
	unsigned int dmabuf_size[2];		/*
						 * size of dma buffer in bytes
						 */
	unsigned int dmabuf_use_size[2];	/*
						 * which size we may now use
						 * for transfer
						 */
	unsigned int dmabuf_used_size[2];	/* which size was truly used */
	unsigned int dmabuf_panic_size[2];
	unsigned int dmabuf_samples[2];		/* size in samples */
	int dmabuf_pages[2];			/* number of pages in buffer */
	unsigned char cnt0_users;		/*
						 * bit field of 8254 CNT0 users
						 * (0-unused, 1-AO, 2-DI, 3-DO)
						 */
	unsigned char exttrg_users;		/*
						 * bit field of external trigger
						 * users(0-AI, 1-AO, 2-DI, 3-DO)
						 */
	unsigned int cnt0_divisor;		/* actual CNT0 divisor */
	void (*int_ai_func) (struct comedi_device *, struct comedi_subdevice *,
		unsigned short,
		unsigned int,
		unsigned short);	/*
					 * ptr to actual interrupt
					 * AI function
					 */
	unsigned char ai16bits;		/* =1 16 bit card */
	unsigned char usedma;		/* =1 use DMA transfer and not INT */
	unsigned char useeoshandle;	/*
					 * =1 change WAKE_EOS DMA transfer
					 * to fit on every second
					 */
	unsigned char usessh;		/* =1 turn on S&H support */
	int softsshdelay;		/*
					 * >0 use software S&H,
					 * numer is requested delay in ns
					 */
	unsigned char softsshsample;	/*
					 * polarity of S&H signal
					 * in sample state
					 */
	unsigned char softsshhold;	/*
					 * polarity of S&H signal
					 * in hold state
					 */
	unsigned int ai_maskerr;	/* which warning was printed */
	unsigned int ai_maskharderr;	/* on which error bits stops */
	unsigned int ai_inttrig_start;	/* TRIG_INT for start */
};

#define devpriv ((struct pci9118_private *)dev->private)
#define this_board ((struct boardtype *)dev->board_ptr)

/*
==============================================================================
*/

static int check_channel_list(struct comedi_device *dev,
			      struct comedi_subdevice *s, int n_chan,
			      unsigned int *chanlist, int frontadd,
			      int backadd);
static int setup_channel_list(struct comedi_device *dev,
			      struct comedi_subdevice *s, int n_chan,
			      unsigned int *chanlist, int rot, int frontadd,
			      int backadd, int usedma, char eoshandle);
static void start_pacer(struct comedi_device *dev, int mode,
			unsigned int divisor1, unsigned int divisor2);
static int pci9118_reset(struct comedi_device *dev);
static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source);
static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source);
static int pci9118_ai_cancel(struct comedi_device *dev,
			     struct comedi_subdevice *s);
static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
				  struct comedi_subdevice *s,
				  unsigned int *tim1, unsigned int *tim2,
				  unsigned int flags, int chans,
				  unsigned int *div1, unsigned int *div2,
				  char usessh, unsigned int chnsshfront);

/*
==============================================================================
*/
static int pci9118_insn_read_ai(struct comedi_device *dev,
				struct comedi_subdevice *s,
				struct comedi_insn *insn, unsigned int *data)
{

	int n, timeout;

	devpriv->AdControlReg = AdControl_Int & 0xff;
	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
						/*
						 * positive triggers, no S&H,
						 * no burst, burst stop,
						 * no post trigger,
						 * no about trigger,
						 * trigger stop
						 */

	if (!setup_channel_list(dev, s, 1, &insn->chanspec, 0, 0, 0, 0, 0))
		return -EINVAL;

	outl(0, dev->iobase + PCI9118_DELFIFO);	/* flush FIFO */

	for (n = 0; n < insn->n; n++) {
		outw(0, dev->iobase + PCI9118_SOFTTRG);	/* start conversion */
		udelay(2);
		timeout = 100;
		while (timeout--) {
			if (inl(dev->iobase + PCI9118_ADSTAT) & AdStatus_ADrdy)
				goto conv_finish;
			udelay(1);
		}

		comedi_error(dev, "A/D insn timeout");
		data[n] = 0;
		outl(0, dev->iobase + PCI9118_DELFIFO);	/* flush FIFO */
		return -ETIME;

conv_finish:
		if (devpriv->ai16bits) {
			data[n] =
			    (inl(dev->iobase +
				 PCI9118_AD_DATA) & 0xffff) ^ 0x8000;
		} else {
			data[n] =
			    (inw(dev->iobase + PCI9118_AD_DATA) >> 4) & 0xfff;
		}
	}

	outl(0, dev->iobase + PCI9118_DELFIFO);	/* flush FIFO */
	return n;

}

/*
==============================================================================
*/
static int pci9118_insn_write_ao(struct comedi_device *dev,
				 struct comedi_subdevice *s,
				 struct comedi_insn *insn, unsigned int *data)
{
	int n, chanreg, ch;

	ch = CR_CHAN(insn->chanspec);
	if (ch)
		chanreg = PCI9118_DA2;
	else
		chanreg = PCI9118_DA1;


	for (n = 0; n < insn->n; n++) {
		outl(data[n], dev->iobase + chanreg);
		devpriv->ao_data[ch] = data[n];
	}

	return n;
}

/*
==============================================================================
*/
static int pci9118_insn_read_ao(struct comedi_device *dev,
				struct comedi_subdevice *s,
				struct comedi_insn *insn, unsigned int *data)
{
	int n, chan;

	chan = CR_CHAN(insn->chanspec);
	for (n = 0; n < insn->n; n++)
		data[n] = devpriv->ao_data[chan];

	return n;
}

/*
==============================================================================
*/
static int pci9118_insn_bits_di(struct comedi_device *dev,
				struct comedi_subdevice *s,
				struct comedi_insn *insn, unsigned int *data)
{
	data[1] = inl(dev->iobase + PCI9118_DI) & 0xf;

	return 2;
}

/*
==============================================================================
*/
static int pci9118_insn_bits_do(struct comedi_device *dev,
				struct comedi_subdevice *s,
				struct comedi_insn *insn, unsigned int *data)
{
	if (data[0]) {
		s->state &= ~data[0];
		s->state |= (data[0] & data[1]);
		outl(s->state & 0x0f, dev->iobase + PCI9118_DO);
	}
	data[1] = s->state;

	return 2;
}

/*
==============================================================================
*/
static void interrupt_pci9118_ai_mode4_switch(struct comedi_device *dev)
{
	devpriv->AdFunctionReg =
	    AdFunction_PDTrg | AdFunction_PETrg | AdFunction_AM;
	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
	outl(0x30, dev->iobase + PCI9118_CNTCTRL);
	outl((devpriv->dmabuf_hw[1 - devpriv->dma_actbuf] >> 1) & 0xff,
	     dev->iobase + PCI9118_CNT0);
	outl((devpriv->dmabuf_hw[1 - devpriv->dma_actbuf] >> 9) & 0xff,
	     dev->iobase + PCI9118_CNT0);
	devpriv->AdFunctionReg |= AdFunction_Start;
	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
}

static unsigned int defragment_dma_buffer(struct comedi_device *dev,
					  struct comedi_subdevice *s,
					  short *dma_buffer,
					  unsigned int num_samples)
{
	unsigned int i = 0, j = 0;
	unsigned int start_pos = devpriv->ai_add_front,
	    stop_pos = devpriv->ai_add_front + devpriv->ai_n_chan;
	unsigned int raw_scanlen = devpriv->ai_add_front + devpriv->ai_n_chan +
	    devpriv->ai_add_back;

	for (i = 0; i < num_samples; i++) {
		if (devpriv->ai_act_dmapos >= start_pos &&
		    devpriv->ai_act_dmapos < stop_pos) {
			dma_buffer[j++] = dma_buffer[i];
		}
		devpriv->ai_act_dmapos++;
		devpriv->ai_act_dmapos %= raw_scanlen;
	}

	return j;
}

/*
==============================================================================
*/
static int move_block_from_dma(struct comedi_device *dev,
					struct comedi_subdevice *s,
					short *dma_buffer,
					unsigned int num_samples)
{
	unsigned int num_bytes;

	num_samples = defragment_dma_buffer(dev, s, dma_buffer, num_samples);
	devpriv->ai_act_scan +=
	    (s->async->cur_chan + num_samples) / devpriv->ai_n_scanlen;
	s->async->cur_chan += num_samples;
	s->async->cur_chan %= devpriv->ai_n_scanlen;
	num_bytes =
	    cfc_write_array_to_buffer(s, dma_buffer,
				      num_samples * sizeof(short));
	if (num_bytes < num_samples * sizeof(short))
		return -1;
	return 0;
}

/*
==============================================================================
*/
static char pci9118_decode_error_status(struct comedi_device *dev,
					struct comedi_subdevice *s,
					unsigned char m)
{
	if (m & 0x100) {
		comedi_error(dev, "A/D FIFO Full status (Fatal Error!)");
		devpriv->ai_maskerr &= ~0x100L;
	}
	if (m & 0x008) {
		comedi_error(dev,
			     "A/D Burst Mode Overrun Status (Fatal Error!)");
		devpriv->ai_maskerr &= ~0x008L;
	}
	if (m & 0x004) {
		comedi_error(dev, "A/D Over Speed Status (Warning!)");
		devpriv->ai_maskerr &= ~0x004L;
	}
	if (m & 0x002) {
		comedi_error(dev, "A/D Overrun Status (Fatal Error!)");
		devpriv->ai_maskerr &= ~0x002L;
	}
	if (m & devpriv->ai_maskharderr) {
		s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
		pci9118_ai_cancel(dev, s);
		comedi_event(dev, s);
		return 1;
	}

	return 0;
}

static void pci9118_ai_munge(struct comedi_device *dev,
			     struct comedi_subdevice *s, void *data,
			     unsigned int num_bytes,
			     unsigned int start_chan_index)
{
	unsigned int i, num_samples = num_bytes / sizeof(short);
	short *array = data;

	for (i = 0; i < num_samples; i++) {
		if (devpriv->usedma)
			array[i] = be16_to_cpu(array[i]);
		if (devpriv->ai16bits)
			array[i] ^= 0x8000;
		else
			array[i] = (array[i] >> 4) & 0x0fff;

	}
}

/*
==============================================================================
*/
static void interrupt_pci9118_ai_onesample(struct comedi_device *dev,
					   struct comedi_subdevice *s,
					   unsigned short int_adstat,
					   unsigned int int_amcc,
					   unsigned short int_daq)
{
	register short sampl;

	s->async->events = 0;

	if (int_adstat & devpriv->ai_maskerr)
		if (pci9118_decode_error_status(dev, s, int_adstat))
			return;

	sampl = inw(dev->iobase + PCI9118_AD_DATA);

#ifdef PCI9118_PARANOIDCHECK
	if (devpriv->ai16bits == 0) {
		if ((sampl & 0x000f) != devpriv->chanlist[s->async->cur_chan]) {
							/* data dropout! */
			printk
			    ("comedi: A/D  SAMPL - data dropout: "
				"received channel %d, expected %d!\n",
				sampl & 0x000f,
				devpriv->chanlist[s->async->cur_chan]);
			s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
			pci9118_ai_cancel(dev, s);
			comedi_event(dev, s);
			return;
		}
	}
#endif
	cfc_write_to_buffer(s, sampl);
	s->async->cur_chan++;
	if (s->async->cur_chan >= devpriv->ai_n_scanlen) {
							/* one scan done */
		s->async->cur_chan %= devpriv->ai_n_scanlen;
		devpriv->ai_act_scan++;
		if (!(devpriv->ai_neverending))
			if (devpriv->ai_act_scan >= devpriv->ai_scans) {
							/* all data sampled */
				pci9118_ai_cancel(dev, s);
				s->async->events |= COMEDI_CB_EOA;
			}
	}

	if (s->async->events)
		comedi_event(dev, s);
}

/*
==============================================================================
*/
static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
				     struct comedi_subdevice *s,
				     unsigned short int_adstat,
				     unsigned int int_amcc,
				     unsigned short int_daq)
{
	unsigned int next_dma_buf, samplesinbuf, sampls, m;

	if (int_amcc & MASTER_ABORT_INT) {
		comedi_error(dev, "AMCC IRQ - MASTER DMA ABORT!");
		s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
		pci9118_ai_cancel(dev, s);
		comedi_event(dev, s);
		return;
	}

	if (int_amcc & TARGET_ABORT_INT) {
		comedi_error(dev, "AMCC IRQ - TARGET DMA ABORT!");
		s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
		pci9118_ai_cancel(dev, s);
		comedi_event(dev, s);
		return;
	}
	if (int_adstat & devpriv->ai_maskerr)
					/* if (int_adstat & 0x106) */
		if (pci9118_decode_error_status(dev, s, int_adstat))
			return;

	samplesinbuf = devpriv->dmabuf_use_size[devpriv->dma_actbuf] >> 1;
					/* number of received real samples */
/* DPRINTK("dma_actbuf=%d\n",devpriv->dma_actbuf); */

	if (devpriv->dma_doublebuf) {	/*
					 * switch DMA buffers if is used
					 * double buffering
					 */
		next_dma_buf = 1 - devpriv->dma_actbuf;
		outl(devpriv->dmabuf_hw[next_dma_buf],
		     devpriv->iobase_a + AMCC_OP_REG_MWAR);
		outl(devpriv->dmabuf_use_size[next_dma_buf],
		     devpriv->iobase_a + AMCC_OP_REG_MWTC);
		devpriv->dmabuf_used_size[next_dma_buf] =
		    devpriv->dmabuf_use_size[next_dma_buf];
		if (devpriv->ai_do == 4)
			interrupt_pci9118_ai_mode4_switch(dev);
	}

	if (samplesinbuf) {
		m = devpriv->ai_data_len >> 1;	/*
						 * how many samples is to
						 * end of buffer
						 */
/*
 * DPRINTK("samps=%d m=%d %d %d\n",
 * samplesinbuf,m,s->async->buf_int_count,s->async->buf_int_ptr);
 */
		sampls = m;
		move_block_from_dma(dev, s,
				    devpriv->dmabuf_virt[devpriv->dma_actbuf],
				    samplesinbuf);
		m = m - sampls;		/* m= how many samples was transferred */
	}
/* DPRINTK("YYY\n"); */

	if (!devpriv->ai_neverending)
		if (devpriv->ai_act_scan >= devpriv->ai_scans) {
							/* all data sampled */
			pci9118_ai_cancel(dev, s);
			s->async->events |= COMEDI_CB_EOA;
		}

	if (devpriv->dma_doublebuf) {	/* switch dma buffers */
		devpriv->dma_actbuf = 1 - devpriv->dma_actbuf;
	} else {	/* restart DMA if is not used double buffering */
		outl(devpriv->dmabuf_hw[0],
		     devpriv->iobase_a + AMCC_OP_REG_MWAR);
		outl(devpriv->dmabuf_use_size[0],
		     devpriv->iobase_a + AMCC_OP_REG_MWTC);
		if (devpriv->ai_do == 4)
			interrupt_pci9118_ai_mode4_switch(dev);
	}

	comedi_event(dev, s);
}

/*
==============================================================================
*/
static irqreturn_t interrupt_pci9118(int irq, void *d)
{
	struct comedi_device *dev = d;
	unsigned int int_daq = 0, int_amcc, int_adstat;

	if (!dev->attached)
		return IRQ_NONE;	/* not fully initialized */

	int_daq = inl(dev->iobase + PCI9118_INTSRC) & 0xf;
					/* get IRQ reasons from card */
	int_amcc = inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR);
					/* get INT register from AMCC chip */

/*
 * DPRINTK("INT daq=0x%01x amcc=0x%08x MWAR=0x%08x
 * MWTC=0x%08x ADSTAT=0x%02x ai_do=%d\n",
 * int_daq, int_amcc, inl(devpriv->iobase_a+AMCC_OP_REG_MWAR),
 * inl(devpriv->iobase_a+AMCC_OP_REG_MWTC),
 * inw(dev->iobase+PCI9118_ADSTAT)&0x1ff,devpriv->ai_do);
 */

	if ((!int_daq) && (!(int_amcc & ANY_S593X_INT)))
		return IRQ_NONE;	/* interrupt from other source */

	outl(int_amcc | 0x00ff0000, devpriv->iobase_a + AMCC_OP_REG_INTCSR);
					/* shutdown IRQ reasons in AMCC */

	int_adstat = inw(dev->iobase + PCI9118_ADSTAT) & 0x1ff;
					/* get STATUS register */

	if (devpriv->ai_do) {
		if (devpriv->ai12_startstop)
			if ((int_adstat & AdStatus_DTH) &&
							(int_daq & Int_DTrg)) {
						/* start stop of measure */
				if (devpriv->ai12_startstop & START_AI_EXT) {
					devpriv->ai12_startstop &=
					    ~START_AI_EXT;
					if (!(devpriv->ai12_startstop &
							STOP_AI_EXT))
							pci9118_exttrg_del
							(dev, EXTTRG_AI);
						/* deactivate EXT trigger */
					start_pacer(dev, devpriv->ai_do,
						devpriv->ai_divisor1,
						devpriv->ai_divisor2);
						/* start pacer */
					outl(devpriv->AdControlReg,
						dev->iobase + PCI9118_ADCNTRL);
				} else {
					if (devpriv->ai12_startstop &
						STOP_AI_EXT) {
						devpriv->ai12_startstop &=
							~STOP_AI_EXT;
						pci9118_exttrg_del
							(dev, EXTTRG_AI);
						/* deactivate EXT trigger */
						devpriv->ai_neverending = 0;
						/*
						 * well, on next interrupt from
						 * DMA/EOC measure will stop
						 */
					}
				}
			}

		(devpriv->int_ai_func) (dev, dev->subdevices + 0, int_adstat,
					int_amcc, int_daq);

	}
	return IRQ_HANDLED;
}

/*
==============================================================================
*/
static int pci9118_ai_inttrig(struct comedi_device *dev,
			      struct comedi_subdevice *s, unsigned int trignum)
{
	if (trignum != devpriv->ai_inttrig_start)
		return -EINVAL;

	devpriv->ai12_startstop &= ~START_AI_INT;
	s->async->inttrig = NULL;

	outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
	if (devpriv->ai_do != 3) {
		start_pacer(dev, devpriv->ai_do, devpriv->ai_divisor1,
			    devpriv->ai_divisor2);
		devpriv->AdControlReg |= AdControl_SoftG;
	}
	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);

	return 1;
}

/*
==============================================================================
*/
static int pci9118_ai_cmdtest(struct comedi_device *dev,
			      struct comedi_subdevice *s,
			      struct comedi_cmd *cmd)
{
	int err = 0;
	int tmp;
	unsigned int divisor1 = 0, divisor2 = 0;

	/* step 1: make sure trigger sources are trivially valid */

	tmp = cmd->start_src;
	cmd->start_src &= TRIG_NOW | TRIG_EXT | TRIG_INT;
	if (!cmd->start_src || tmp != cmd->start_src)
		err++;

	tmp = cmd->scan_begin_src;
	if (devpriv->master)
		cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT | TRIG_FOLLOW;
	else
		cmd->scan_begin_src &= TRIG_FOLLOW;

	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
		err++;

	tmp = cmd->convert_src;
	if (devpriv->master)
		cmd->convert_src &= TRIG_TIMER | TRIG_EXT | TRIG_NOW;
	else
		cmd->convert_src &= TRIG_TIMER | TRIG_EXT;

	if (!cmd->convert_src || tmp != cmd->convert_src)
		err++;

	tmp = cmd->scan_end_src;
	cmd->scan_end_src &= TRIG_COUNT;
	if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
		err++;

	tmp = cmd->stop_src;
	cmd->stop_src &= TRIG_COUNT | TRIG_NONE | TRIG_EXT;
	if (!cmd->stop_src || tmp != cmd->stop_src)
		err++;

	if (err)
		return 1;

	/*
	 * step 2:
	 * make sure trigger sources are
	 * unique and mutually compatible
	 */

	if (cmd->start_src != TRIG_NOW &&
	    cmd->start_src != TRIG_INT && cmd->start_src != TRIG_EXT) {
		cmd->start_src = TRIG_NOW;
		err++;
	}

	if (cmd->scan_begin_src != TRIG_TIMER &&
	    cmd->scan_begin_src != TRIG_EXT &&
	    cmd->scan_begin_src != TRIG_INT &&
	    cmd->scan_begin_src != TRIG_FOLLOW) {
		cmd->scan_begin_src = TRIG_FOLLOW;
		err++;
	}

	if (cmd->convert_src != TRIG_TIMER &&
	    cmd->convert_src != TRIG_EXT && cmd->convert_src != TRIG_NOW) {
		cmd->convert_src = TRIG_TIMER;
		err++;
	}

	if (cmd->scan_end_src != TRIG_COUNT) {
		cmd->scan_end_src = TRIG_COUNT;
		err++;
	}

	if (cmd->stop_src != TRIG_NONE &&
	    cmd->stop_src != TRIG_COUNT &&
	    cmd->stop_src != TRIG_INT && cmd->stop_src != TRIG_EXT) {
		cmd->stop_src = TRIG_COUNT;
		err++;
	}

	if (cmd->start_src == TRIG_EXT && cmd->scan_begin_src == TRIG_EXT) {
		cmd->start_src = TRIG_NOW;
		err++;
	}

	if (cmd->start_src == TRIG_INT && cmd->scan_begin_src == TRIG_INT) {
		cmd->start_src = TRIG_NOW;
		err++;
	}

	if ((cmd->scan_begin_src & (TRIG_TIMER | TRIG_EXT)) &&
	    (!(cmd->convert_src & (TRIG_TIMER | TRIG_NOW)))) {
		cmd->convert_src = TRIG_TIMER;
		err++;
	}

	if ((cmd->scan_begin_src == TRIG_FOLLOW) &&
	    (!(cmd->convert_src & (TRIG_TIMER | TRIG_EXT)))) {
		cmd->convert_src = TRIG_TIMER;
		err++;
	}

	if (cmd->stop_src == TRIG_EXT && cmd->scan_begin_src == TRIG_EXT) {
		cmd->stop_src = TRIG_COUNT;
		err++;
	}

	if (err)
		return 2;

	/* step 3: make sure arguments are trivially compatible */

	if (cmd->start_src & (TRIG_NOW | TRIG_EXT))
		if (cmd->start_arg != 0) {
			cmd->start_arg = 0;
			err++;
		}

	if (cmd->scan_begin_src & (TRIG_FOLLOW | TRIG_EXT))
		if (cmd->scan_begin_arg != 0) {
			cmd->scan_begin_arg = 0;
			err++;
		}

	if ((cmd->scan_begin_src == TRIG_TIMER) &&
	    (cmd->convert_src == TRIG_TIMER) && (cmd->scan_end_arg == 1)) {
		cmd->scan_begin_src = TRIG_FOLLOW;
		cmd->convert_arg = cmd->scan_begin_arg;
		cmd->scan_begin_arg = 0;
	}

	if (cmd->scan_begin_src == TRIG_TIMER)
		if (cmd->scan_begin_arg < this_board->ai_ns_min) {
			cmd->scan_begin_arg = this_board->ai_ns_min;
			err++;
		}

	if (cmd->scan_begin_src == TRIG_EXT)
		if (cmd->scan_begin_arg) {
			cmd->scan_begin_arg = 0;
			err++;
			if (cmd->scan_end_arg > 65535) {
				cmd->scan_end_arg = 65535;
				err++;
			}
		}

	if (cmd->convert_src & (TRIG_TIMER | TRIG_NOW))
		if (cmd->convert_arg < this_board->ai_ns_min) {
			cmd->convert_arg = this_board->ai_ns_min;
			err++;
		}

	if (cmd->convert_src == TRIG_EXT)
		if (cmd->convert_arg) {
			cmd->convert_arg = 0;
			err++;
		}

	if (cmd->stop_src == TRIG_COUNT) {
		if (!cmd->stop_arg) {
			cmd->stop_arg = 1;
			err++;
		}
	} else {		/* TRIG_NONE */
		if (cmd->stop_arg != 0) {
			cmd->stop_arg = 0;
			err++;
		}
	}

	if (!cmd->chanlist_len) {
		cmd->chanlist_len = 1;
		err++;
	}

	if (cmd->chanlist_len > this_board->n_aichanlist) {
		cmd->chanlist_len = this_board->n_aichanlist;
		err++;
	}

	if (cmd->scan_end_arg < cmd->chanlist_len) {
		cmd->scan_end_arg = cmd->chanlist_len;
		err++;
	}

	if ((cmd->scan_end_arg % cmd->chanlist_len)) {
		cmd->scan_end_arg =
		    cmd->chanlist_len * (cmd->scan_end_arg / cmd->chanlist_len);
		err++;
	}

	if (err)
		return 3;

	/* step 4: fix up any arguments */

	if (cmd->scan_begin_src == TRIG_TIMER) {
		tmp = cmd->scan_begin_arg;
/* printk("S1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
					  &divisor2, &cmd->scan_begin_arg,
					  cmd->flags & TRIG_ROUND_MASK);
/* printk("S2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
		if (cmd->scan_begin_arg < this_board->ai_ns_min)
			cmd->scan_begin_arg = this_board->ai_ns_min;
		if (tmp != cmd->scan_begin_arg)
			err++;
	}

	if (cmd->convert_src & (TRIG_TIMER | TRIG_NOW)) {
		tmp = cmd->convert_arg;
		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, &divisor1,
					  &divisor2, &cmd->convert_arg,
					  cmd->flags & TRIG_ROUND_MASK);
/* printk("s1 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
		if (cmd->convert_arg < this_board->ai_ns_min)
			cmd->convert_arg = this_board->ai_ns_min;
		if (tmp != cmd->convert_arg)
			err++;
		if (cmd->scan_begin_src == TRIG_TIMER
		    && cmd->convert_src == TRIG_NOW) {
			if (cmd->convert_arg == 0) {
				if (cmd->scan_begin_arg <
				    this_board->ai_ns_min *
				    (cmd->scan_end_arg + 2)) {
					cmd->scan_begin_arg =
					    this_board->ai_ns_min *
					    (cmd->scan_end_arg + 2);
/* printk("s2 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
					err++;
				}
			} else {
				if (cmd->scan_begin_arg <
				    cmd->convert_arg * cmd->chanlist_len) {
					cmd->scan_begin_arg =
					    cmd->convert_arg *
					    cmd->chanlist_len;
/* printk("s3 timer1=%u timer2=%u\n",cmd->scan_begin_arg,cmd->convert_arg); */
					err++;
				}
			}
		}
	}

	if (err)
		return 4;

	if (cmd->chanlist)
		if (!check_channel_list(dev, s, cmd->chanlist_len,
					cmd->chanlist, 0, 0))
			return 5;	/* incorrect channels list */

	return 0;
}

/*
==============================================================================
*/
static int Compute_and_setup_dma(struct comedi_device *dev)
{
	unsigned int dmalen0, dmalen1, i;

	DPRINTK("adl_pci9118 EDBG: BGN: Compute_and_setup_dma()\n");
	dmalen0 = devpriv->dmabuf_size[0];
	dmalen1 = devpriv->dmabuf_size[1];
	DPRINTK("1 dmalen0=%d dmalen1=%d ai_data_len=%d\n", dmalen0, dmalen1,
		devpriv->ai_data_len);
	/* isn't output buff smaller that our DMA buff? */
	if (dmalen0 > (devpriv->ai_data_len)) {
		dmalen0 = devpriv->ai_data_len & ~3L;	/*
							 * align to 32bit down
							 */
	}
	if (dmalen1 > (devpriv->ai_data_len)) {
		dmalen1 = devpriv->ai_data_len & ~3L;	/*
							 * align to 32bit down
							 */
	}
	DPRINTK("2 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);

	/* we want wake up every scan? */
	if (devpriv->ai_flags & TRIG_WAKE_EOS) {
		if (dmalen0 < (devpriv->ai_n_realscanlen << 1)) {
			/* uff, too short DMA buffer, disable EOS support! */
			devpriv->ai_flags &= (~TRIG_WAKE_EOS);
			printk
			    ("comedi%d: WAR: DMA0 buf too short, can't "
					"support TRIG_WAKE_EOS (%d<%d)\n",
			     dev->minor, dmalen0,
			     devpriv->ai_n_realscanlen << 1);
		} else {
			/* short first DMA buffer to one scan */
			dmalen0 = devpriv->ai_n_realscanlen << 1;
			DPRINTK
				("21 dmalen0=%d ai_n_realscanlen=%d "
							"useeoshandle=%d\n",
				dmalen0, devpriv->ai_n_realscanlen,
				devpriv->useeoshandle);
			if (devpriv->useeoshandle)
				dmalen0 += 2;
			if (dmalen0 < 4) {
				printk
					("comedi%d: ERR: DMA0 buf len bug? "
								"(%d<4)\n",
					dev->minor, dmalen0);
				dmalen0 = 4;
			}
		}
	}
	if (devpriv->ai_flags & TRIG_WAKE_EOS) {
		if (dmalen1 < (devpriv->ai_n_realscanlen << 1)) {
			/* uff, too short DMA buffer, disable EOS support! */
			devpriv->ai_flags &= (~TRIG_WAKE_EOS);
			printk
			    ("comedi%d: WAR: DMA1 buf too short, "
					"can't support TRIG_WAKE_EOS (%d<%d)\n",
			     dev->minor, dmalen1,
			     devpriv->ai_n_realscanlen << 1);
		} else {
			/* short second DMA buffer to one scan */
			dmalen1 = devpriv->ai_n_realscanlen << 1;
			DPRINTK
			    ("22 dmalen1=%d ai_n_realscanlen=%d "
							"useeoshandle=%d\n",
			     dmalen1, devpriv->ai_n_realscanlen,
			     devpriv->useeoshandle);
			if (devpriv->useeoshandle)
				dmalen1 -= 2;
			if (dmalen1 < 4) {
				printk
					("comedi%d: ERR: DMA1 buf len bug? "
								"(%d<4)\n",
					dev->minor, dmalen1);
				dmalen1 = 4;
			}
		}
	}

	DPRINTK("3 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
	/* transfer without TRIG_WAKE_EOS */
	if (!(devpriv->ai_flags & TRIG_WAKE_EOS)) {
		/* if it's possible then align DMA buffers to length of scan */
		i = dmalen0;
		dmalen0 =
		    (dmalen0 / (devpriv->ai_n_realscanlen << 1)) *
		    (devpriv->ai_n_realscanlen << 1);
		dmalen0 &= ~3L;
		if (!dmalen0)
			dmalen0 = i;	/* uff. very long scan? */
		i = dmalen1;
		dmalen1 =
		    (dmalen1 / (devpriv->ai_n_realscanlen << 1)) *
		    (devpriv->ai_n_realscanlen << 1);
		dmalen1 &= ~3L;
		if (!dmalen1)
			dmalen1 = i;	/* uff. very long scan? */
		/*
		 * if measure isn't neverending then test, if it fits whole
		 * into one or two DMA buffers
		 */
		if (!devpriv->ai_neverending) {
			/* fits whole measure into one DMA buffer? */
			if (dmalen0 >
			    ((devpriv->ai_n_realscanlen << 1) *
			     devpriv->ai_scans)) {
				DPRINTK
				    ("3.0 ai_n_realscanlen=%d ai_scans=%d\n",
				     devpriv->ai_n_realscanlen,
				     devpriv->ai_scans);
				dmalen0 =
				    (devpriv->ai_n_realscanlen << 1) *
				    devpriv->ai_scans;
				DPRINTK("3.1 dmalen0=%d dmalen1=%d\n", dmalen0,
					dmalen1);
				dmalen0 &= ~3L;
			} else {	/*
					 * fits whole measure into
					 * two DMA buffer?
					 */
				if (dmalen1 >
				    ((devpriv->ai_n_realscanlen << 1) *
				     devpriv->ai_scans - dmalen0))
					dmalen1 =
					    (devpriv->ai_n_realscanlen << 1) *
					    devpriv->ai_scans - dmalen0;
				DPRINTK("3.2 dmalen0=%d dmalen1=%d\n", dmalen0,
					dmalen1);
				dmalen1 &= ~3L;
			}
		}
	}

	DPRINTK("4 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);

	/* these DMA buffer size will be used */
	devpriv->dma_actbuf = 0;
	devpriv->dmabuf_use_size[0] = dmalen0;
	devpriv->dmabuf_use_size[1] = dmalen1;

	DPRINTK("5 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
#if 0
	if (devpriv->ai_n_scanlen < this_board->half_fifo_size) {
		devpriv->dmabuf_panic_size[0] =
		    (this_board->half_fifo_size / devpriv->ai_n_scanlen +
		     1) * devpriv->ai_n_scanlen * sizeof(short);
		devpriv->dmabuf_panic_size[1] =
		    (this_board->half_fifo_size / devpriv->ai_n_scanlen +
		     1) * devpriv->ai_n_scanlen * sizeof(short);
	} else {
		devpriv->dmabuf_panic_size[0] =
		    (devpriv->ai_n_scanlen << 1) % devpriv->dmabuf_size[0];
		devpriv->dmabuf_panic_size[1] =
		    (devpriv->ai_n_scanlen << 1) % devpriv->dmabuf_size[1];
	}
#endif

	outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) & (~EN_A2P_TRANSFERS),
			devpriv->iobase_a + AMCC_OP_REG_MCSR);	/* stop DMA */
	outl(devpriv->dmabuf_hw[0], devpriv->iobase_a + AMCC_OP_REG_MWAR);
	outl(devpriv->dmabuf_use_size[0], devpriv->iobase_a + AMCC_OP_REG_MWTC);
	/* init DMA transfer */
	outl(0x00000000 | AINT_WRITE_COMPL,
	     devpriv->iobase_a + AMCC_OP_REG_INTCSR);
/* outl(0x02000000|AINT_WRITE_COMPL, devpriv->iobase_a+AMCC_OP_REG_INTCSR); */

	outl(inl(devpriv->iobase_a +
		 AMCC_OP_REG_MCSR) | RESET_A2P_FLAGS | A2P_HI_PRIORITY |
	     EN_A2P_TRANSFERS, devpriv->iobase_a + AMCC_OP_REG_MCSR);
	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | EN_A2P_TRANSFERS,
			devpriv->iobase_a + AMCC_OP_REG_INTCSR);
						/* allow bus mastering */

	DPRINTK("adl_pci9118 EDBG: END: Compute_and_setup_dma()\n");
	return 0;
}

/*
==============================================================================
*/
static int pci9118_ai_docmd_sampl(struct comedi_device *dev,
				  struct comedi_subdevice *s)
{
	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_sampl(%d,) [%d]\n",
		dev->minor, devpriv->ai_do);
	switch (devpriv->ai_do) {
	case 1:
		devpriv->AdControlReg |= AdControl_TmrTr;
		break;
	case 2:
		comedi_error(dev, "pci9118_ai_docmd_sampl() mode 2 bug!\n");
		return -EIO;
	case 3:
		devpriv->AdControlReg |= AdControl_ExtM;
		break;
	case 4:
		comedi_error(dev, "pci9118_ai_docmd_sampl() mode 4 bug!\n");
		return -EIO;
	default:
		comedi_error(dev,
			     "pci9118_ai_docmd_sampl() mode number bug!\n");
		return -EIO;
	}

	devpriv->int_ai_func = interrupt_pci9118_ai_onesample;
						/* transfer function */

	if (devpriv->ai12_startstop)
		pci9118_exttrg_add(dev, EXTTRG_AI);
						/* activate EXT trigger */

	if ((devpriv->ai_do == 1) || (devpriv->ai_do == 2))
		devpriv->IntControlReg |= Int_Timer;

	devpriv->AdControlReg |= AdControl_Int;

	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00,
			devpriv->iobase_a + AMCC_OP_REG_INTCSR);
							/* allow INT in AMCC */

	if (!(devpriv->ai12_startstop & (START_AI_EXT | START_AI_INT))) {
		outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
		outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
		if (devpriv->ai_do != 3) {
			start_pacer(dev, devpriv->ai_do, devpriv->ai_divisor1,
				    devpriv->ai_divisor2);
			devpriv->AdControlReg |= AdControl_SoftG;
		}
		outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
	}

	DPRINTK("adl_pci9118 EDBG: END: pci9118_ai_docmd_sampl()\n");
	return 0;
}

/*
==============================================================================
*/
static int pci9118_ai_docmd_dma(struct comedi_device *dev,
				struct comedi_subdevice *s)
{
	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_dma(%d,) [%d,%d]\n",
		dev->minor, devpriv->ai_do, devpriv->usedma);
	Compute_and_setup_dma(dev);

	switch (devpriv->ai_do) {
	case 1:
		devpriv->AdControlReg |=
		    ((AdControl_TmrTr | AdControl_Dma) & 0xff);
		break;
	case 2:
		devpriv->AdControlReg |=
		    ((AdControl_TmrTr | AdControl_Dma) & 0xff);
		devpriv->AdFunctionReg =
		    AdFunction_PDTrg | AdFunction_PETrg | AdFunction_BM |
		    AdFunction_BS;
		if (devpriv->usessh && (!devpriv->softsshdelay))
			devpriv->AdFunctionReg |= AdFunction_BSSH;
		outl(devpriv->ai_n_realscanlen, dev->iobase + PCI9118_BURST);
		break;
	case 3:
		devpriv->AdControlReg |=
		    ((AdControl_ExtM | AdControl_Dma) & 0xff);
		devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
		break;
	case 4:
		devpriv->AdControlReg |=
		    ((AdControl_TmrTr | AdControl_Dma) & 0xff);
		devpriv->AdFunctionReg =
		    AdFunction_PDTrg | AdFunction_PETrg | AdFunction_AM;
		outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
		outl(0x30, dev->iobase + PCI9118_CNTCTRL);
		outl((devpriv->dmabuf_hw[0] >> 1) & 0xff,
		     dev->iobase + PCI9118_CNT0);
		outl((devpriv->dmabuf_hw[0] >> 9) & 0xff,
		     dev->iobase + PCI9118_CNT0);
		devpriv->AdFunctionReg |= AdFunction_Start;
		break;
	default:
		comedi_error(dev, "pci9118_ai_docmd_dma() mode number bug!\n");
		return -EIO;
	}

	if (devpriv->ai12_startstop) {
		pci9118_exttrg_add(dev, EXTTRG_AI);
						/* activate EXT trigger */
	}

	devpriv->int_ai_func = interrupt_pci9118_ai_dma;
						/* transfer function */

	outl(0x02000000 | AINT_WRITE_COMPL,
	     devpriv->iobase_a + AMCC_OP_REG_INTCSR);

	if (!(devpriv->ai12_startstop & (START_AI_EXT | START_AI_INT))) {
		outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
		outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
		if (devpriv->ai_do != 3) {
			start_pacer(dev, devpriv->ai_do, devpriv->ai_divisor1,
				    devpriv->ai_divisor2);
			devpriv->AdControlReg |= AdControl_SoftG;
		}
		outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
	}

	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_docmd_dma()\n");
	return 0;
}

/*
==============================================================================
*/
static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
	struct comedi_cmd *cmd = &s->async->cmd;
	unsigned int addchans = 0;
	int ret = 0;

	DPRINTK("adl_pci9118 EDBG: BGN: pci9118_ai_cmd(%d,)\n", dev->minor);
	devpriv->ai12_startstop = 0;
	devpriv->ai_flags = cmd->flags;
	devpriv->ai_n_chan = cmd->chanlist_len;
	devpriv->ai_n_scanlen = cmd->scan_end_arg;
	devpriv->ai_chanlist = cmd->chanlist;
	devpriv->ai_data = s->async->prealloc_buf;
	devpriv->ai_data_len = s->async->prealloc_bufsz;
	devpriv->ai_timer1 = 0;
	devpriv->ai_timer2 = 0;
	devpriv->ai_add_front = 0;
	devpriv->ai_add_back = 0;
	devpriv->ai_maskerr = 0x10e;

	/* prepare for start/stop conditions */
	if (cmd->start_src == TRIG_EXT)
		devpriv->ai12_startstop |= START_AI_EXT;
	if (cmd->stop_src == TRIG_EXT) {
		devpriv->ai_neverending = 1;
		devpriv->ai12_startstop |= STOP_AI_EXT;
	}
	if (cmd->start_src == TRIG_INT) {
		devpriv->ai12_startstop |= START_AI_INT;
		devpriv->ai_inttrig_start = cmd->start_arg;
		s->async->inttrig = pci9118_ai_inttrig;
	}
#if 0
	if (cmd->stop_src == TRIG_INT) {
		devpriv->ai_neverending = 1;
		devpriv->ai12_startstop |= STOP_AI_INT;
	}
#endif
	if (cmd->stop_src == TRIG_NONE)
		devpriv->ai_neverending = 1;
	if (cmd->stop_src == TRIG_COUNT) {
		devpriv->ai_scans = cmd->stop_arg;
		devpriv->ai_neverending = 0;
	} else {
		devpriv->ai_scans = 0;
	}

	/* use sample&hold signal? */
	if (cmd->convert_src == TRIG_NOW)
		devpriv->usessh = 1;
	/* yes */
	else
		devpriv->usessh = 0;
				/*  no */

	DPRINTK("1 neverending=%d scans=%u usessh=%d ai_startstop=0x%2x\n",
		devpriv->ai_neverending, devpriv->ai_scans, devpriv->usessh,
		devpriv->ai12_startstop);

	/*
	 * use additional sample at end of every scan
	 * to satisty DMA 32 bit transfer?
	 */
	devpriv->ai_add_front = 0;
	devpriv->ai_add_back = 0;
	devpriv->useeoshandle = 0;
	if (devpriv->master) {
		devpriv->usedma = 1;
		if ((cmd->flags & TRIG_WAKE_EOS) &&
		    (devpriv->ai_n_scanlen == 1)) {
			if (cmd->convert_src == TRIG_NOW)
				devpriv->ai_add_back = 1;
			if (cmd->convert_src == TRIG_TIMER) {
				devpriv->usedma = 0;
					/*
					 * use INT transfer if scanlist
					 * have only one channel
					 */
			}
		}
		if ((cmd->flags & TRIG_WAKE_EOS) &&
		    (devpriv->ai_n_scanlen & 1) &&
		    (devpriv->ai_n_scanlen > 1)) {
			if (cmd->scan_begin_src == TRIG_FOLLOW) {
				/*
				 * vpriv->useeoshandle=1; // change DMA transfer
				 * block to fit EOS on every second call
				 */
				devpriv->usedma = 0;
				/*
				 * XXX maybe can be corrected to use 16 bit DMA
				 */
			} else {	/*
					 * well, we must insert one sample
					 * to end of EOS to meet 32 bit transfer
					 */
				devpriv->ai_add_back = 1;
			}
		}
	} else {	/* interrupt transfer don't need any correction */
		devpriv->usedma = 0;
	}

	/*
	 * we need software S&H signal?
	 * It adds two samples before every scan as minimum
	 */
	if (devpriv->usessh && devpriv->softsshdelay) {
		devpriv->ai_add_front = 2;
		if ((devpriv->usedma == 1) && (devpriv->ai_add_back == 1)) {
							/* move it to front */
			devpriv->ai_add_front++;
			devpriv->ai_add_back = 0;
		}
		if (cmd->convert_arg < this_board->ai_ns_min)
			cmd->convert_arg = this_board->ai_ns_min;
		addchans = devpriv->softsshdelay / cmd->convert_arg;
		if (devpriv->softsshdelay % cmd->convert_arg)
			addchans++;
		if (addchans > (devpriv->ai_add_front - 1)) {
							/* uff, still short */
			devpriv->ai_add_front = addchans + 1;
			if (devpriv->usedma == 1)
				if ((devpriv->ai_add_front +
				     devpriv->ai_n_chan +
				     devpriv->ai_add_back) & 1)
					devpriv->ai_add_front++;
							/* round up to 32 bit */
		}
	}
	/* well, we now know what must be all added */
	devpriv->ai_n_realscanlen =	/*
					 * what we must take from card in real
					 * to have ai_n_scanlen on output?
					 */
	    (devpriv->ai_add_front + devpriv->ai_n_chan +
	     devpriv->ai_add_back) * (devpriv->ai_n_scanlen /
				      devpriv->ai_n_chan);

	DPRINTK("2 usedma=%d realscan=%d af=%u n_chan=%d ab=%d n_scanlen=%d\n",
		devpriv->usedma,
		devpriv->ai_n_realscanlen, devpriv->ai_add_front,
		devpriv->ai_n_chan, devpriv->ai_add_back,
		devpriv->ai_n_scanlen);

	/* check and setup channel list */
	if (!check_channel_list(dev, s, devpriv->ai_n_chan,
				devpriv->ai_chanlist, devpriv->ai_add_front,
				devpriv->ai_add_back))
		return -EINVAL;
	if (!setup_channel_list(dev, s, devpriv->ai_n_chan,
				devpriv->ai_chanlist, 0, devpriv->ai_add_front,
				devpriv->ai_add_back, devpriv->usedma,
				devpriv->useeoshandle))
		return -EINVAL;

	/* compute timers settings */
	/*
	 * simplest way, fr=4Mhz/(tim1*tim2),
	 * channel manipulation without timers effect
	 */
	if (((cmd->scan_begin_src == TRIG_FOLLOW) ||
		(cmd->scan_begin_src == TRIG_EXT) ||
		(cmd->scan_begin_src == TRIG_INT)) &&
		(cmd->convert_src == TRIG_TIMER)) {
					/* both timer is used for one time */
		if (cmd->scan_begin_src == TRIG_EXT)
			devpriv->ai_do = 4;
		else
			devpriv->ai_do = 1;
		pci9118_calc_divisors(devpriv->ai_do, dev, s,
				      &cmd->scan_begin_arg, &cmd->convert_arg,
				      devpriv->ai_flags,
				      devpriv->ai_n_realscanlen,
				      &devpriv->ai_divisor1,
				      &devpriv->ai_divisor2, devpriv->usessh,
				      devpriv->ai_add_front);
		devpriv->ai_timer2 = cmd->convert_arg;
	}

	if ((cmd->scan_begin_src == TRIG_TIMER) &&
		((cmd->convert_src == TRIG_TIMER) ||
		(cmd->convert_src == TRIG_NOW))) {
						/* double timed action */
		if (!devpriv->usedma) {
			comedi_error(dev,
				     "cmd->scan_begin_src=TRIG_TIMER works "
						"only with bus mastering!");
			return -EIO;
		}

		devpriv->ai_do = 2;
		pci9118_calc_divisors(devpriv->ai_do, dev, s,
				      &cmd->scan_begin_arg, &cmd->convert_arg,
				      devpriv->ai_flags,
				      devpriv->ai_n_realscanlen,
				      &devpriv->ai_divisor1,
				      &devpriv->ai_divisor2, devpriv->usessh,
				      devpriv->ai_add_front);
		devpriv->ai_timer1 = cmd->scan_begin_arg;
		devpriv->ai_timer2 = cmd->convert_arg;
	}

	if ((cmd->scan_begin_src == TRIG_FOLLOW)
	    && (cmd->convert_src == TRIG_EXT)) {
		devpriv->ai_do = 3;
	}

	start_pacer(dev, -1, 0, 0);	/* stop pacer */

	devpriv->AdControlReg = 0;	/*
					 * bipolar, S.E., use 8254, stop 8354,
					 * internal trigger, soft trigger,
					 * disable DMA
					 */
	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
					/*
					 * positive triggers, no S&H, no burst,
					 * burst stop, no post trigger,
					 * no about trigger, trigger stop
					 */
	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
	udelay(1);
	outl(0, dev->iobase + PCI9118_DELFIFO);	/* flush FIFO */
	inl(dev->iobase + PCI9118_ADSTAT);	/*
						 * flush A/D and INT
						 * status register
						 */
	inl(dev->iobase + PCI9118_INTSRC);

	devpriv->ai_act_scan = 0;
	devpriv->ai_act_dmapos = 0;
	s->async->cur_chan = 0;
	devpriv->ai_buf_ptr = 0;

	if (devpriv->usedma)
		ret = pci9118_ai_docmd_dma(dev, s);
	else
		ret = pci9118_ai_docmd_sampl(dev, s);

	DPRINTK("adl_pci9118 EDBG: END: pci9118_ai_cmd()\n");
	return ret;
}

/*
==============================================================================
*/
static int check_channel_list(struct comedi_device *dev,
			      struct comedi_subdevice *s, int n_chan,
			      unsigned int *chanlist, int frontadd, int backadd)
{
	unsigned int i, differencial = 0, bipolar = 0;

	/* correct channel and range number check itself comedi/range.c */
	if (n_chan < 1) {
		comedi_error(dev, "range/channel list is empty!");
		return 0;
	}
	if ((frontadd + n_chan + backadd) > s->len_chanlist) {
		printk
		    ("comedi%d: range/channel list is too long for "
						"actual configuration (%d>%d)!",
		     dev->minor, n_chan, s->len_chanlist - frontadd - backadd);
		return 0;
	}

	if (CR_AREF(chanlist[0]) == AREF_DIFF)
		differencial = 1;	/* all input must be diff */
	if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES)
		bipolar = 1;	/* all input must be bipolar */
	if (n_chan > 1)
		for (i = 1; i < n_chan; i++) {	/* check S.E/diff */
			if ((CR_AREF(chanlist[i]) == AREF_DIFF) !=
			    (differencial)) {
				comedi_error(dev,
					     "Differencial and single ended "
						"inputs can't be mixtured!");
				return 0;
			}
			if ((CR_RANGE(chanlist[i]) < PCI9118_BIPOLAR_RANGES) !=
			    (bipolar)) {
				comedi_error(dev,
					     "Bipolar and unipolar ranges "
							"can't be mixtured!");
				return 0;
			}
			if ((!devpriv->usemux) & (differencial) &
			    (CR_CHAN(chanlist[i]) >= this_board->n_aichand)) {
				comedi_error(dev,
					     "If AREF_DIFF is used then is "
					"available only first 8 channels!");
				return 0;
			}
		}

	return 1;
}

/*
==============================================================================
*/
static int setup_channel_list(struct comedi_device *dev,
			      struct comedi_subdevice *s, int n_chan,
			      unsigned int *chanlist, int rot, int frontadd,
			      int backadd, int usedma, char useeos)
{
	unsigned int i, differencial = 0, bipolar = 0;
	unsigned int scanquad, gain, ssh = 0x00;

	DPRINTK
	    ("adl_pci9118 EDBG: BGN: setup_channel_list"
						"(%d,.,%d,.,%d,%d,%d,%d)\n",
	     dev->minor, n_chan, rot, frontadd, backadd, usedma);

	if (usedma == 1) {
		rot = 8;
		usedma = 0;
	}

	if (CR_AREF(chanlist[0]) == AREF_DIFF)
		differencial = 1;	/* all input must be diff */
	if (CR_RANGE(chanlist[0]) < PCI9118_BIPOLAR_RANGES)
		bipolar = 1;	/* all input must be bipolar */

	/* All is ok, so we can setup channel/range list */

	if (!bipolar) {
		devpriv->AdControlReg |= AdControl_UniP;
							/* set unibipolar */
	} else {
		devpriv->AdControlReg &= ((~AdControl_UniP) & 0xff);
							/* enable bipolar */
	}

	if (differencial) {
		devpriv->AdControlReg |= AdControl_Diff;
							/* enable diff inputs */
	} else {
		devpriv->AdControlReg &= ((~AdControl_Diff) & 0xff);
						/* set single ended inputs */
	}

	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
								/* setup mode */

	outl(2, dev->iobase + PCI9118_SCANMOD);
					/* gods know why this sequence! */
	outl(0, dev->iobase + PCI9118_SCANMOD);
	outl(1, dev->iobase + PCI9118_SCANMOD);

#ifdef PCI9118_PARANOIDCHECK
	devpriv->chanlistlen = n_chan;
	for (i = 0; i < (PCI9118_CHANLEN + 1); i++)
		devpriv->chanlist[i] = 0x55aa;
#endif

	if (frontadd) {		/* insert channels for S&H */
		ssh = devpriv->softsshsample;
		DPRINTK("FA: %04x: ", ssh);
		for (i = 0; i < frontadd; i++) {
						/* store range list to card */
			scanquad = CR_CHAN(chanlist[0]);
						/* get channel number; */
			gain = CR_RANGE(chanlist[0]);
						/* get gain number */
			scanquad |= ((gain & 0x03) << 8);
			outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
			DPRINTK("%02x ", scanquad | ssh);
			ssh = devpriv->softsshhold;
		}
		DPRINTK("\n ");
	}

	DPRINTK("SL: ", ssh);
	for (i = 0; i < n_chan; i++) {	/* store range list to card */
		scanquad = CR_CHAN(chanlist[i]);	/* get channel number */
#ifdef PCI9118_PARANOIDCHECK
		devpriv->chanlist[i ^ usedma] = (scanquad & 0xf) << rot;
#endif
		gain = CR_RANGE(chanlist[i]);		/* get gain number */
		scanquad |= ((gain & 0x03) << 8);
		outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
		DPRINTK("%02x ", scanquad | ssh);
	}
	DPRINTK("\n ");

	if (backadd) {		/* insert channels for fit onto 32bit DMA */
		DPRINTK("BA: %04x: ", ssh);
		for (i = 0; i < backadd; i++) {	/* store range list to card */
			scanquad = CR_CHAN(chanlist[0]);
							/* get channel number */
			gain = CR_RANGE(chanlist[0]);	/* get gain number */
			scanquad |= ((gain & 0x03) << 8);
			outl(scanquad | ssh, dev->iobase + PCI9118_GAIN);
			DPRINTK("%02x ", scanquad | ssh);
		}
		DPRINTK("\n ");
	}
#ifdef PCI9118_PARANOIDCHECK
	devpriv->chanlist[n_chan ^ usedma] = devpriv->chanlist[0 ^ usedma];
						/* for 32bit operations */
	if (useeos) {
		for (i = 1; i < n_chan; i++) {	/* store range list to card */
			devpriv->chanlist[(n_chan + i) ^ usedma] =
			    (CR_CHAN(chanlist[i]) & 0xf) << rot;
		}
		devpriv->chanlist[(2 * n_chan) ^ usedma] =
						devpriv->chanlist[0 ^ usedma];
						/* for 32bit operations */
		useeos = 2;
	} else {
		useeos = 1;
	}
#ifdef PCI9118_EXTDEBUG
	DPRINTK("CHL: ");
	for (i = 0; i <= (useeos * n_chan); i++)
		DPRINTK("%04x ", devpriv->chanlist[i]);

	DPRINTK("\n ");
#endif
#endif
	outl(0, dev->iobase + PCI9118_SCANMOD);	/* close scan queue */
	/* udelay(100); important delay, or first sample will be crippled */

	DPRINTK("adl_pci9118 EDBG: END: setup_channel_list()\n");
	return 1;		/* we can serve this with scan logic */
}

/*
==============================================================================
  calculate 8254 divisors if they are used for dual timing
*/
static void pci9118_calc_divisors(char mode, struct comedi_device *dev,
				  struct comedi_subdevice *s,
				  unsigned int *tim1, unsigned int *tim2,
				  unsigned int flags, int chans,
				  unsigned int *div1, unsigned int *div2,
				  char usessh, unsigned int chnsshfront)
{
	DPRINTK
	    ("adl_pci9118 EDBG: BGN: pci9118_calc_divisors"
					"(%d,%d,.,%u,%u,%u,%d,.,.,,%u,%u)\n",
	     mode, dev->minor, *tim1, *tim2, flags, chans, usessh, chnsshfront);
	switch (mode) {
	case 1:
	case 4:
		if (*tim2 < this_board->ai_ns_min)
			*tim2 = this_board->ai_ns_min;
		i8253_cascade_ns_to_timer(devpriv->i8254_osc_base, div1, div2,
					  tim2, flags & TRIG_ROUND_NEAREST);
		DPRINTK("OSC base=%u div1=%u div2=%u timer1=%u\n",
			devpriv->i8254_osc_base, *div1, *div2, *tim1);
		break;
	case 2:
		if (*tim2 < this_board->ai_ns_min)
			*tim2 = this_board->ai_ns_min;
		DPRINTK("1 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*div1 = *tim2 / devpriv->i8254_osc_base;
						/* convert timer (burst) */
		DPRINTK("2 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		if (*div1 < this_board->ai_pacer_min)
			*div1 = this_board->ai_pacer_min;
		DPRINTK("3 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*div2 = *tim1 / devpriv->i8254_osc_base;	/* scan timer */
		DPRINTK("4 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*div2 = *div2 / *div1;		/* major timer is c1*c2 */
		DPRINTK("5 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		if (*div2 < chans)
			*div2 = chans;
		DPRINTK("6 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);

		*tim2 = *div1 * devpriv->i8254_osc_base;
							/* real convert timer */

		if (usessh & (chnsshfront == 0))	/* use BSSH signal */
			if (*div2 < (chans + 2))
				*div2 = chans + 2;

		DPRINTK("7 div1=%u div2=%u timer1=%u timer2=%u\n", *div1, *div2,
			*tim1, *tim2);
		*tim1 = *div1 * *div2 * devpriv->i8254_osc_base;
		DPRINTK("OSC base=%u div1=%u div2=%u timer1=%u timer2=%u\n",
			devpriv->i8254_osc_base, *div1, *div2, *tim1, *tim2);
		break;
	}
	DPRINTK("adl_pci9118 EDBG: END: pci9118_calc_divisors(%u,%u)\n",
		*div1, *div2);
}

/*
==============================================================================
*/
static void start_pacer(struct comedi_device *dev, int mode,
			unsigned int divisor1, unsigned int divisor2)
{
	outl(0x74, dev->iobase + PCI9118_CNTCTRL);
	outl(0xb4, dev->iobase + PCI9118_CNTCTRL);
/* outl(0x30, dev->iobase + PCI9118_CNTCTRL); */
	udelay(1);

	if ((mode == 1) || (mode == 2) || (mode == 4)) {
		outl(divisor2 & 0xff, dev->iobase + PCI9118_CNT2);
		outl((divisor2 >> 8) & 0xff, dev->iobase + PCI9118_CNT2);
		outl(divisor1 & 0xff, dev->iobase + PCI9118_CNT1);
		outl((divisor1 >> 8) & 0xff, dev->iobase + PCI9118_CNT1);
	}
}

/*
==============================================================================
*/
static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source)
{
	if (source > 3)
		return -1;				/* incorrect source */
	devpriv->exttrg_users |= (1 << source);
	devpriv->IntControlReg |= Int_DTrg;
	outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
	outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00,
					devpriv->iobase_a + AMCC_OP_REG_INTCSR);
							/* allow INT in AMCC */
	return 0;
}

/*
==============================================================================
*/
static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source)
{
	if (source > 3)
		return -1;			/* incorrect source */
	devpriv->exttrg_users &= ~(1 << source);
	if (!devpriv->exttrg_users) {	/* shutdown ext trg intterrupts */
		devpriv->IntControlReg &= ~Int_DTrg;
		if (!devpriv->IntControlReg)	/* all IRQ disabled */
			outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) &
					(~0x00001f00),
					devpriv->iobase_a + AMCC_OP_REG_INTCSR);
						/* disable int in AMCC */
		outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
	}
	return 0;
}

/*
==============================================================================
*/
static int pci9118_ai_cancel(struct comedi_device *dev,
			     struct comedi_subdevice *s)
{
	if (devpriv->usedma)
		outl(inl(devpriv->iobase_a + AMCC_OP_REG_MCSR) &
			(~EN_A2P_TRANSFERS),
			devpriv->iobase_a + AMCC_OP_REG_MCSR);	/* stop DMA */
	pci9118_exttrg_del(dev, EXTTRG_AI);
	start_pacer(dev, 0, 0, 0);	/* stop 8254 counters */
	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
					/*
					 * positive triggers, no S&H, no burst,
					 * burst stop, no post trigger,
					 * no about trigger, trigger stop
					 */
	devpriv->AdControlReg = 0x00;
	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
					/*
					 * bipolar, S.E., use 8254, stop 8354,
					 * internal trigger, soft trigger,
					 * disable INT and DMA
					 */
	outl(0, dev->iobase + PCI9118_BURST);
	outl(1, dev->iobase + PCI9118_SCANMOD);
	outl(2, dev->iobase + PCI9118_SCANMOD);	/* reset scan queue */
	outl(0, dev->iobase + PCI9118_DELFIFO);	/* flush FIFO */

	devpriv->ai_do = 0;
	devpriv->usedma = 0;

	devpriv->ai_act_scan = 0;
	devpriv->ai_act_dmapos = 0;
	s->async->cur_chan = 0;
	s->async->inttrig = NULL;
	devpriv->ai_buf_ptr = 0;
	devpriv->ai_neverending = 0;
	devpriv->dma_actbuf = 0;

	if (!devpriv->IntControlReg)
		outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00,
					devpriv->iobase_a + AMCC_OP_REG_INTCSR);
							/* allow INT in AMCC */

	return 0;
}

/*
==============================================================================
*/
static int pci9118_reset(struct comedi_device *dev)
{
	devpriv->IntControlReg = 0;
	devpriv->exttrg_users = 0;
	inl(dev->iobase + PCI9118_INTCTRL);
	outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
						/* disable interrupts source */
	outl(0x30, dev->iobase + PCI9118_CNTCTRL);
/* outl(0xb4, dev->iobase + PCI9118_CNTCTRL); */
	start_pacer(dev, 0, 0, 0);		/* stop 8254 counters */
	devpriv->AdControlReg = 0;
	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
						/*
						 * bipolar, S.E., use 8254,
						 * stop 8354, internal trigger,
						 * soft trigger,
						 * disable INT and DMA
						 */
	outl(0, dev->iobase + PCI9118_BURST);
	outl(1, dev->iobase + PCI9118_SCANMOD);
	outl(2, dev->iobase + PCI9118_SCANMOD);	/* reset scan queue */
	devpriv->AdFunctionReg = AdFunction_PDTrg | AdFunction_PETrg;
	outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_ADFUNC);
						/*
						 * positive triggers, no S&H,
						 * no burst, burst stop,
						 * no post trigger,
						 * no about trigger,
						 * trigger stop
						 */

	devpriv->ao_data[0] = 2047;
	devpriv->ao_data[1] = 2047;
	outl(devpriv->ao_data[0], dev->iobase + PCI9118_DA1);
						/* reset A/D outs to 0V */
	outl(devpriv->ao_data[1], dev->iobase + PCI9118_DA2);
	outl(0, dev->iobase + PCI9118_DO);	/* reset digi outs to L */
	udelay(10);
	inl(dev->iobase + PCI9118_AD_DATA);
	outl(0, dev->iobase + PCI9118_DELFIFO);	/* flush FIFO */
	outl(0, dev->iobase + PCI9118_INTSRC);	/* remove INT requests */
	inl(dev->iobase + PCI9118_ADSTAT);	/* flush A/D status register */
	inl(dev->iobase + PCI9118_INTSRC);	/* flush INT requests */
	devpriv->AdControlReg = 0;
	outl(devpriv->AdControlReg, dev->iobase + PCI9118_ADCNTRL);
						/*
						 * bipolar, S.E., use 8254,
						 * stop 8354, internal trigger,
						 * soft trigger,
						 * disable INT and DMA
						 */

	devpriv->cnt0_users = 0;
	devpriv->exttrg_users = 0;

	return 0;
}

/*
==============================================================================
*/
static int pci9118_attach(struct comedi_device *dev,
			  struct comedi_devconfig *it)
{
	struct comedi_subdevice *s;
	int ret, pages, i;
	unsigned short master;
	unsigned int irq;
	unsigned long iobase_a, iobase_9;
	struct pci_dev *pcidev;
	int opt_bus, opt_slot;
	const char *errstr;
	unsigned char pci_bus, pci_slot, pci_func;
	u16 u16w;

	printk("comedi%d: adl_pci9118: board=%s", dev->minor, this_board->name);

	opt_bus = it->options[0];
	opt_slot = it->options[1];
	if (it->options[3] & 1)
		master = 0;	/* user don't want use bus master */
	else
		master = 1;

	ret = alloc_private(dev, sizeof(struct pci9118_private));
	if (ret < 0) {
		printk(" - Allocation failed!\n");
		return -ENOMEM;
	}

	/* Look for matching PCI device */
	errstr = "not found!";
	pcidev = NULL;
	while (NULL != (pcidev = pci_get_device(PCI_VENDOR_ID_AMCC,
						this_board->device_id,
						pcidev))) {
		/* Found matching vendor/device. */
		if (opt_bus || opt_slot) {
			/* Check bus/slot. */
			if (opt_bus != pcidev->bus->number
			    || opt_slot != PCI_SLOT(pcidev->devfn))
				continue;	/* no match */
		}
		/*
		 * Look for device that isn't in use.
		 * Enable PCI device and request regions.
		 */
		if (comedi_pci_enable(pcidev, "adl_pci9118")) {
			errstr =
			    "failed to enable PCI device and request regions!";
			continue;
		}
		break;
	}

	if (!pcidev) {
		if (opt_bus || opt_slot) {
			printk(KERN_ERR " - Card at b:s %d:%d %s\n",
			       opt_bus, opt_slot, errstr);
		} else {
			printk(KERN_ERR " - Card %s\n", errstr);
		}
		return -EIO;
	}

	if (master)
		pci_set_master(pcidev);


	pci_bus = pcidev->bus->number;
	pci_slot = PCI_SLOT(pcidev->devfn);
	pci_func = PCI_FUNC(pcidev->devfn);
	irq = pcidev->irq;
	iobase_a = pci_resource_start(pcidev, 0);
	iobase_9 = pci_resource_start(pcidev, 2);

	printk(KERN_ERR ", b:s:f=%d:%d:%d, io=0x%4lx, 0x%4lx", pci_bus,
				pci_slot, pci_func, iobase_9, iobase_a);

	dev->iobase = iobase_9;
	dev->board_name = this_board->name;

	devpriv->pcidev = pcidev;
	devpriv->iobase_a = iobase_a;

	pci9118_reset(dev);

	if (it->options[3] & 2)
		irq = 0;	/* user don't want use IRQ */
	if (irq > 0) {
		if (request_irq(irq, interrupt_pci9118, IRQF_SHARED,
				"ADLink PCI-9118", dev)) {
			printk(", unable to allocate IRQ %d, DISABLING IT",
			       irq);
			irq = 0;	/* Can't use IRQ */
		} else {
			printk(", irq=%u", irq);
		}
	} else {
		printk(", IRQ disabled");
	}

	dev->irq = irq;

	if (master) {		/* alloc DMA buffers */
		devpriv->dma_doublebuf = 0;
		for (i = 0; i < 2; i++) {
			for (pages = 4; pages >= 0; pages--) {
				devpriv->dmabuf_virt[i] =
				    (short *)__get_free_pages(GFP_KERNEL,
							      pages);
				if (devpriv->dmabuf_virt[i])
					break;
			}
			if (devpriv->dmabuf_virt[i]) {
				devpriv->dmabuf_pages[i] = pages;
				devpriv->dmabuf_size[i] = PAGE_SIZE * pages;
				devpriv->dmabuf_samples[i] =
				    devpriv->dmabuf_size[i] >> 1;
				devpriv->dmabuf_hw[i] =
				    virt_to_bus((void *)
						devpriv->dmabuf_virt[i]);
			}
		}
		if (!devpriv->dmabuf_virt[0]) {
			printk(", Can't allocate DMA buffer, DMA disabled!");
			master = 0;
		}

		if (devpriv->dmabuf_virt[1])
			devpriv->dma_doublebuf = 1;

	}

	devpriv->master = master;
	if (devpriv->master)
		printk(", bus master");
	else
		printk(", no bus master");

	devpriv->usemux = 0;
	if (it->options[2] > 0) {
		devpriv->usemux = it->options[2];
		if (devpriv->usemux > 256)
			devpriv->usemux = 256;	/* max 256 channels! */
		if (it->options[4] > 0)
			if (devpriv->usemux > 128) {
				devpriv->usemux = 128;
					/* max 128 channels with softare S&H! */
			}
		printk(", ext. mux %d channels", devpriv->usemux);
	}

	devpriv->softsshdelay = it->options[4];
	if (devpriv->softsshdelay < 0) {
					/* select sample&hold signal polarity */
		devpriv->softsshdelay = -devpriv->softsshdelay;
		devpriv->softsshsample = 0x80;
		devpriv->softsshhold = 0x00;
	} else {
		devpriv->softsshsample = 0x00;
		devpriv->softsshhold = 0x80;
	}

	printk(".\n");

	pci_read_config_word(devpriv->pcidev, PCI_COMMAND, &u16w);
	pci_write_config_word(devpriv->pcidev, PCI_COMMAND, u16w | 64);
				/* Enable parity check for parity error */

	ret = alloc_subdevices(dev, 4);
	if (ret < 0)
		return ret;

	s = dev->subdevices + 0;
	dev->read_subdev = s;
	s->type = COMEDI_SUBD_AI;
	s->subdev_flags = SDF_READABLE | SDF_COMMON | SDF_GROUND | SDF_DIFF;
	if (devpriv->usemux)
		s->n_chan = devpriv->usemux;
	else
		s->n_chan = this_board->n_aichan;

	s->maxdata = this_board->ai_maxdata;
	s->len_chanlist = this_board->n_aichanlist;
	s->range_table = this_board->rangelist_ai;
	s->cancel = pci9118_ai_cancel;
	s->insn_read = pci9118_insn_read_ai;
	if (dev->irq) {
		s->subdev_flags |= SDF_CMD_READ;
		s->do_cmdtest = pci9118_ai_cmdtest;
		s->do_cmd = pci9118_ai_cmd;
		s->munge = pci9118_ai_munge;
	}

	s = dev->subdevices + 1;
	s->type = COMEDI_SUBD_AO;
	s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
	s->n_chan = this_board->n_aochan;
	s->maxdata = this_board->ao_maxdata;
	s->len_chanlist = this_board->n_aochan;
	s->range_table = this_board->rangelist_ao;
	s->insn_write = pci9118_insn_write_ao;
	s->insn_read = pci9118_insn_read_ao;

	s = dev->subdevices + 2;
	s->type = COMEDI_SUBD_DI;
	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
	s->n_chan = 4;
	s->maxdata = 1;
	s->len_chanlist = 4;
	s->range_table = &range_digital;
	s->io_bits = 0;		/* all bits input */
	s->insn_bits = pci9118_insn_bits_di;

	s = dev->subdevices + 3;
	s->type = COMEDI_SUBD_DO;
	s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
	s->n_chan = 4;
	s->maxdata = 1;
	s->len_chanlist = 4;
	s->range_table = &range_digital;
	s->io_bits = 0xf;	/* all bits output */
	s->insn_bits = pci9118_insn_bits_do;

	devpriv->valid = 1;
	devpriv->i8254_osc_base = 250;	/* 250ns=4MHz */
	devpriv->ai_maskharderr = 0x10a;
					/* default measure crash condition */
	if (it->options[5])		/* disable some requested */
		devpriv->ai_maskharderr &= ~it->options[5];

	switch (this_board->ai_maxdata) {
	case 0xffff:
		devpriv->ai16bits = 1;
		break;
	default:
		devpriv->ai16bits = 0;
		break;
	}
	return 0;
}

/*
==============================================================================
*/
static int pci9118_detach(struct comedi_device *dev)
{
	if (dev->private) {
		if (devpriv->valid)
			pci9118_reset(dev);
		if (dev->irq)
			free_irq(dev->irq, dev);
		if (devpriv->pcidev) {
			if (dev->iobase)
				comedi_pci_disable(devpriv->pcidev);

			pci_dev_put(devpriv->pcidev);
		}
		if (devpriv->dmabuf_virt[0])
			free_pages((unsigned long)devpriv->dmabuf_virt[0],
				   devpriv->dmabuf_pages[0]);
		if (devpriv->dmabuf_virt[1])
			free_pages((unsigned long)devpriv->dmabuf_virt[1],
				   devpriv->dmabuf_pages[1]);
	}

	return 0;
}

/*
==============================================================================
*/

MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");