/* linux/drivers/usb/phy/samsung-usbphy.c * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Author: Praveen Paneri * * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and * OHCI-EXYNOS controllers. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include /* Register definitions */ #define SAMSUNG_PHYPWR (0x00) #define PHYPWR_NORMAL_MASK (0x19 << 0) #define PHYPWR_OTG_DISABLE (0x1 << 4) #define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) #define PHYPWR_FORCE_SUSPEND (0x1 << 1) /* For Exynos4 */ #define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) #define PHYPWR_SLEEP_PHY0 (0x1 << 5) #define SAMSUNG_PHYCLK (0x04) #define PHYCLK_MODE_USB11 (0x1 << 6) #define PHYCLK_EXT_OSC (0x1 << 5) #define PHYCLK_COMMON_ON_N (0x1 << 4) #define PHYCLK_ID_PULL (0x1 << 2) #define PHYCLK_CLKSEL_MASK (0x3 << 0) #define PHYCLK_CLKSEL_48M (0x0 << 0) #define PHYCLK_CLKSEL_12M (0x2 << 0) #define PHYCLK_CLKSEL_24M (0x3 << 0) #define SAMSUNG_RSTCON (0x08) #define RSTCON_PHYLINK_SWRST (0x1 << 2) #define RSTCON_HLINK_SWRST (0x1 << 1) #define RSTCON_SWRST (0x1 << 0) /* EXYNOS5 */ #define EXYNOS5_PHY_HOST_CTRL0 (0x00) #define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) #define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) #define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) #define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) #define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) #define HOST_CTRL0_FSEL_MASK (0x7 << 16) #define HOST_CTRL0_FSEL(_x) ((_x) << 16) #define FSEL_CLKSEL_50M (0x7) #define FSEL_CLKSEL_24M (0x5) #define FSEL_CLKSEL_20M (0x4) #define FSEL_CLKSEL_19200K (0x3) #define FSEL_CLKSEL_12M (0x2) #define FSEL_CLKSEL_10M (0x1) #define FSEL_CLKSEL_9600K (0x0) #define HOST_CTRL0_TESTBURNIN (0x1 << 11) #define HOST_CTRL0_RETENABLE (0x1 << 10) #define HOST_CTRL0_COMMONON_N (0x1 << 9) #define HOST_CTRL0_SIDDQ (0x1 << 6) #define HOST_CTRL0_FORCESLEEP (0x1 << 5) #define HOST_CTRL0_FORCESUSPEND (0x1 << 4) #define HOST_CTRL0_WORDINTERFACE (0x1 << 3) #define HOST_CTRL0_UTMISWRST (0x1 << 2) #define HOST_CTRL0_LINKSWRST (0x1 << 1) #define HOST_CTRL0_PHYSWRST (0x1 << 0) #define EXYNOS5_PHY_HOST_TUNE0 (0x04) #define EXYNOS5_PHY_HSIC_CTRL1 (0x10) #define EXYNOS5_PHY_HSIC_TUNE1 (0x14) #define EXYNOS5_PHY_HSIC_CTRL2 (0x20) #define EXYNOS5_PHY_HSIC_TUNE2 (0x24) #define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) #define HSIC_CTRL_REFCLKSEL (0x2 << 23) #define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) #define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) #define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) #define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) #define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) #define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) #define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) #define HSIC_CTRL_SIDDQ (0x1 << 6) #define HSIC_CTRL_FORCESLEEP (0x1 << 5) #define HSIC_CTRL_FORCESUSPEND (0x1 << 4) #define HSIC_CTRL_WORDINTERFACE (0x1 << 3) #define HSIC_CTRL_UTMISWRST (0x1 << 2) #define HSIC_CTRL_PHYSWRST (0x1 << 0) #define EXYNOS5_PHY_HOST_EHCICTRL (0x30) #define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) #define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) #define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) #define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) #define EXYNOS5_PHY_HOST_OHCICTRL (0x34) #define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) #define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) #define HOST_OHCICTRL_CNTSEL (0x1 << 1) #define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) #define EXYNOS5_PHY_OTG_SYS (0x38) #define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) #define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) #define OTG_SYS_PHY0_SWRST (0x1 << 12) #define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) #define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) #define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) #define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) #define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) #define OTG_SYS_COMMON_ON (0x1 << 7) #define OTG_SYS_FSEL_MASK (0x7 << 4) #define OTG_SYS_FSEL(_x) ((_x) << 4) #define OTG_SYS_FORCESLEEP (0x1 << 3) #define OTG_SYS_OTGDISABLE (0x1 << 2) #define OTG_SYS_SIDDQ_UOTG (0x1 << 1) #define OTG_SYS_FORCESUSPEND (0x1 << 0) #define EXYNOS5_PHY_OTG_TUNE (0x40) #ifndef MHZ #define MHZ (1000*1000) #endif #ifndef KHZ #define KHZ (1000) #endif #define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) #define S3C64XX_USBPHY_ENABLE (0x1 << 16) #define EXYNOS_USBPHY_ENABLE (0x1 << 0) #define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) enum samsung_cpu_type { TYPE_S3C64XX, TYPE_EXYNOS4210, TYPE_EXYNOS5250, }; /* * struct samsung_usbphy_drvdata - driver data for various SoC variants * @cpu_type: machine identifier * @devphy_en_mask: device phy enable mask for PHY CONTROL register * @hostphy_en_mask: host phy enable mask for PHY CONTROL register * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from * mapped address of system controller. * @hostphy_reg_offset: offset to HOST PHY CONTROL register from * mapped address of system controller. * * Here we have a separate mask for device type phy. * Having different masks for host and device type phy helps * in setting independent masks in case of SoCs like S5PV210, * in which PHY0 and PHY1 enable bits belong to same register * placed at position 0 and 1 respectively. * Although for newer SoCs like exynos these bits belong to * different registers altogether placed at position 0. */ struct samsung_usbphy_drvdata { int cpu_type; int devphy_en_mask; int hostphy_en_mask; u32 devphy_reg_offset; u32 hostphy_reg_offset; }; /* * struct samsung_usbphy - transceiver driver state * @phy: transceiver structure * @plat: platform data * @dev: The parent device supplied to the probe function * @clk: usb phy clock * @regs: usb phy controller registers memory base * @pmuregs: USB device PHY_CONTROL register memory base * @sysreg: USB2.0 PHY_CFG register memory base * @ref_clk_freq: reference clock frequency selection * @drv_data: driver data available for different SoCs * @phy_type: Samsung SoCs specific phy types: #HOST * #DEVICE * @phy_usage: usage count for phy * @lock: lock for phy operations */ struct samsung_usbphy { struct usb_phy phy; struct samsung_usbphy_data *plat; struct device *dev; struct clk *clk; void __iomem *regs; void __iomem *pmuregs; void __iomem *sysreg; int ref_clk_freq; const struct samsung_usbphy_drvdata *drv_data; enum samsung_usb_phy_type phy_type; atomic_t phy_usage; spinlock_t lock; }; #define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) { if (!otg) return -ENODEV; if (!otg->host) otg->host = host; return 0; } static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) { struct device_node *usbphy_sys; /* Getting node for system controller interface for usb-phy */ usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); if (!usbphy_sys) { dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); return -ENODEV; } sphy->pmuregs = of_iomap(usbphy_sys, 0); if (sphy->pmuregs == NULL) { dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); goto err0; } sphy->sysreg = of_iomap(usbphy_sys, 1); /* * Not returning error code here, since this situation is not fatal. * Few SoCs may not have this switch available */ if (sphy->sysreg == NULL) dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); of_node_put(usbphy_sys); return 0; err0: of_node_put(usbphy_sys); return -ENXIO; } /* * Set isolation here for phy. * Here 'on = true' would mean USB PHY block is isolated, hence * de-activated and vice-versa. */ static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) { void __iomem *reg = NULL; u32 reg_val; u32 en_mask = 0; if (!sphy->pmuregs) { dev_warn(sphy->dev, "Can't set pmu isolation\n"); return; } switch (sphy->drv_data->cpu_type) { case TYPE_S3C64XX: /* * Do nothing: We will add here once S3C64xx goes for DT support */ break; case TYPE_EXYNOS4210: /* * Fall through since exynos4210 and exynos5250 have similar * register architecture: two separate registers for host and * device phy control with enable bit at position 0. */ case TYPE_EXYNOS5250: if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset; en_mask = sphy->drv_data->devphy_en_mask; } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset; en_mask = sphy->drv_data->hostphy_en_mask; } break; default: dev_err(sphy->dev, "Invalid SoC type\n"); return; } reg_val = readl(reg); if (on) reg_val &= ~en_mask; else reg_val |= en_mask; writel(reg_val, reg); } /* * Configure the mode of working of usb-phy here: HOST/DEVICE. */ static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) { u32 reg; if (!sphy->sysreg) { dev_warn(sphy->dev, "Can't configure specified phy mode\n"); return; } reg = readl(sphy->sysreg); if (sphy->phy_type == USB_PHY_TYPE_DEVICE) reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; else if (sphy->phy_type == USB_PHY_TYPE_HOST) reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; writel(reg, sphy->sysreg); } /* * PHYs are different for USB Device and USB Host. * This make sure that correct PHY type is selected before * any operation on PHY. */ static int samsung_usbphy_set_type(struct usb_phy *phy, enum samsung_usb_phy_type phy_type) { struct samsung_usbphy *sphy = phy_to_sphy(phy); sphy->phy_type = phy_type; return 0; } /* * Returns reference clock frequency selection value */ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) { struct clk *ref_clk; int refclk_freq = 0; /* * In exynos5250 USB host and device PHY use * external crystal clock XXTI */ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) ref_clk = clk_get(sphy->dev, "ext_xtal"); else ref_clk = clk_get(sphy->dev, "xusbxti"); if (IS_ERR(ref_clk)) { dev_err(sphy->dev, "Failed to get reference clock\n"); return PTR_ERR(ref_clk); } if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) { /* set clock frequency for PLL */ switch (clk_get_rate(ref_clk)) { case 9600 * KHZ: refclk_freq = FSEL_CLKSEL_9600K; break; case 10 * MHZ: refclk_freq = FSEL_CLKSEL_10M; break; case 12 * MHZ: refclk_freq = FSEL_CLKSEL_12M; break; case 19200 * KHZ: refclk_freq = FSEL_CLKSEL_19200K; break; case 20 * MHZ: refclk_freq = FSEL_CLKSEL_20M; break; case 50 * MHZ: refclk_freq = FSEL_CLKSEL_50M; break; case 24 * MHZ: default: /* default reference clock */ refclk_freq = FSEL_CLKSEL_24M; break; } } else { switch (clk_get_rate(ref_clk)) { case 12 * MHZ: refclk_freq = PHYCLK_CLKSEL_12M; break; case 24 * MHZ: refclk_freq = PHYCLK_CLKSEL_24M; break; case 48 * MHZ: refclk_freq = PHYCLK_CLKSEL_48M; break; default: if (sphy->drv_data->cpu_type == TYPE_S3C64XX) refclk_freq = PHYCLK_CLKSEL_48M; else refclk_freq = PHYCLK_CLKSEL_24M; break; } } clk_put(ref_clk); return refclk_freq; } static bool exynos5_phyhost_is_on(void *regs) { u32 reg; reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); return !(reg & HOST_CTRL0_SIDDQ); } static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy) { void __iomem *regs = sphy->regs; u32 phyclk = sphy->ref_clk_freq; u32 phyhost; u32 phyotg; u32 phyhsic; u32 ehcictrl; u32 ohcictrl; /* * phy_usage helps in keeping usage count for phy * so that the first consumer enabling the phy is also * the last consumer to disable it. */ atomic_inc(&sphy->phy_usage); if (exynos5_phyhost_is_on(regs)) { dev_info(sphy->dev, "Already power on PHY\n"); return; } /* Host configuration */ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); /* phy reference clock configuration */ phyhost &= ~HOST_CTRL0_FSEL_MASK; phyhost |= HOST_CTRL0_FSEL(phyclk); /* host phy reset */ phyhost &= ~(HOST_CTRL0_PHYSWRST | HOST_CTRL0_PHYSWRSTALL | HOST_CTRL0_SIDDQ | /* Enable normal mode of operation */ HOST_CTRL0_FORCESUSPEND | HOST_CTRL0_FORCESLEEP); /* Link reset */ phyhost |= (HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST | /* COMMON Block configuration during suspend */ HOST_CTRL0_COMMONON_N); writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); udelay(10); phyhost &= ~(HOST_CTRL0_LINKSWRST | HOST_CTRL0_UTMISWRST); writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); /* OTG configuration */ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); /* phy reference clock configuration */ phyotg &= ~OTG_SYS_FSEL_MASK; phyotg |= OTG_SYS_FSEL(phyclk); /* Enable normal mode of operation */ phyotg &= ~(OTG_SYS_FORCESUSPEND | OTG_SYS_SIDDQ_UOTG | OTG_SYS_FORCESLEEP | OTG_SYS_REFCLKSEL_MASK | /* COMMON Block configuration during suspend */ OTG_SYS_COMMON_ON); /* OTG phy & link reset */ phyotg |= (OTG_SYS_PHY0_SWRST | OTG_SYS_LINKSWRST_UOTG | OTG_SYS_PHYLINK_SWRESET | OTG_SYS_OTGDISABLE | /* Set phy refclk */ OTG_SYS_REFCLKSEL_CLKCORE); writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); udelay(10); phyotg &= ~(OTG_SYS_PHY0_SWRST | OTG_SYS_LINKSWRST_UOTG | OTG_SYS_PHYLINK_SWRESET); writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); /* HSIC phy configuration */ phyhsic = (HSIC_CTRL_REFCLKDIV_12 | HSIC_CTRL_REFCLKSEL | HSIC_CTRL_PHYSWRST); writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); udelay(10); phyhsic &= ~HSIC_CTRL_PHYSWRST; writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); udelay(80); /* enable EHCI DMA burst */ ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | HOST_EHCICTRL_ENAINCR4 | HOST_EHCICTRL_ENAINCR8 | HOST_EHCICTRL_ENAINCR16); writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); /* set ohci_suspend_on_n */ ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); ohcictrl |= HOST_OHCICTRL_SUSPLGCY; writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); } static void samsung_usbphy_enable(struct samsung_usbphy *sphy) { void __iomem *regs = sphy->regs; u32 phypwr; u32 phyclk; u32 rstcon; /* set clock frequency for PLL */ phyclk = sphy->ref_clk_freq; phypwr = readl(regs + SAMSUNG_PHYPWR); rstcon = readl(regs + SAMSUNG_RSTCON); switch (sphy->drv_data->cpu_type) { case TYPE_S3C64XX: phyclk &= ~PHYCLK_COMMON_ON_N; phypwr &= ~PHYPWR_NORMAL_MASK; rstcon |= RSTCON_SWRST; break; case TYPE_EXYNOS4210: phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; rstcon |= RSTCON_SWRST; default: break; } writel(phyclk, regs + SAMSUNG_PHYCLK); /* Configure PHY0 for normal operation*/ writel(phypwr, regs + SAMSUNG_PHYPWR); /* reset all ports of PHY and Link */ writel(rstcon, regs + SAMSUNG_RSTCON); udelay(10); rstcon &= ~RSTCON_SWRST; writel(rstcon, regs + SAMSUNG_RSTCON); } static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy) { void __iomem *regs = sphy->regs; u32 phyhost; u32 phyotg; u32 phyhsic; if (atomic_dec_return(&sphy->phy_usage) > 0) { dev_info(sphy->dev, "still being used\n"); return; } phyhsic = (HSIC_CTRL_REFCLKDIV_12 | HSIC_CTRL_REFCLKSEL | HSIC_CTRL_SIDDQ | HSIC_CTRL_FORCESLEEP | HSIC_CTRL_FORCESUSPEND); writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); phyhost |= (HOST_CTRL0_SIDDQ | HOST_CTRL0_FORCESUSPEND | HOST_CTRL0_FORCESLEEP | HOST_CTRL0_PHYSWRST | HOST_CTRL0_PHYSWRSTALL); writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); phyotg |= (OTG_SYS_FORCESUSPEND | OTG_SYS_SIDDQ_UOTG | OTG_SYS_FORCESLEEP); writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); } static void samsung_usbphy_disable(struct samsung_usbphy *sphy) { void __iomem *regs = sphy->regs; u32 phypwr; phypwr = readl(regs + SAMSUNG_PHYPWR); switch (sphy->drv_data->cpu_type) { case TYPE_S3C64XX: phypwr |= PHYPWR_NORMAL_MASK; break; case TYPE_EXYNOS4210: phypwr |= PHYPWR_NORMAL_MASK_PHY0; default: break; } /* Disable analog and otg block power */ writel(phypwr, regs + SAMSUNG_PHYPWR); } /* * The function passed to the usb driver for phy initialization */ static int samsung_usbphy_init(struct usb_phy *phy) { struct samsung_usbphy *sphy; struct usb_bus *host = NULL; unsigned long flags; int ret = 0; sphy = phy_to_sphy(phy); host = phy->otg->host; /* Enable the phy clock */ ret = clk_prepare_enable(sphy->clk); if (ret) { dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); return ret; } spin_lock_irqsave(&sphy->lock, flags); if (host) { /* setting default phy-type for USB 2.0 */ if (!strstr(dev_name(host->controller), "ehci") || !strstr(dev_name(host->controller), "ohci")) samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); } else { samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); } /* Disable phy isolation */ if (sphy->plat && sphy->plat->pmu_isolation) sphy->plat->pmu_isolation(false); else samsung_usbphy_set_isolation(sphy, false); /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ samsung_usbphy_cfg_sel(sphy); /* Initialize usb phy registers */ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) samsung_exynos5_usbphy_enable(sphy); else samsung_usbphy_enable(sphy); spin_unlock_irqrestore(&sphy->lock, flags); /* Disable the phy clock */ clk_disable_unprepare(sphy->clk); return ret; } /* * The function passed to the usb driver for phy shutdown */ static void samsung_usbphy_shutdown(struct usb_phy *phy) { struct samsung_usbphy *sphy; struct usb_bus *host = NULL; unsigned long flags; sphy = phy_to_sphy(phy); host = phy->otg->host; if (clk_prepare_enable(sphy->clk)) { dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); return; } spin_lock_irqsave(&sphy->lock, flags); if (host) { /* setting default phy-type for USB 2.0 */ if (!strstr(dev_name(host->controller), "ehci") || !strstr(dev_name(host->controller), "ohci")) samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); } else { samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); } /* De-initialize usb phy registers */ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) samsung_exynos5_usbphy_disable(sphy); else samsung_usbphy_disable(sphy); /* Enable phy isolation */ if (sphy->plat && sphy->plat->pmu_isolation) sphy->plat->pmu_isolation(true); else samsung_usbphy_set_isolation(sphy, true); spin_unlock_irqrestore(&sphy->lock, flags); clk_disable_unprepare(sphy->clk); } static const struct of_device_id samsung_usbphy_dt_match[]; static inline const struct samsung_usbphy_drvdata *samsung_usbphy_get_driver_data(struct platform_device *pdev) { if (pdev->dev.of_node) { const struct of_device_id *match; match = of_match_node(samsung_usbphy_dt_match, pdev->dev.of_node); return match->data; } return (struct samsung_usbphy_drvdata *) platform_get_device_id(pdev)->driver_data; } static int samsung_usbphy_probe(struct platform_device *pdev) { struct samsung_usbphy *sphy; struct usb_otg *otg; struct samsung_usbphy_data *pdata = pdev->dev.platform_data; const struct samsung_usbphy_drvdata *drv_data; struct device *dev = &pdev->dev; struct resource *phy_mem; void __iomem *phy_base; struct clk *clk; int ret; phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!phy_mem) { dev_err(dev, "%s: missing mem resource\n", __func__); return -ENODEV; } phy_base = devm_ioremap_resource(dev, phy_mem); if (IS_ERR(phy_base)) return PTR_ERR(phy_base); sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); if (!sphy) return -ENOMEM; otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); if (!otg) return -ENOMEM; drv_data = samsung_usbphy_get_driver_data(pdev); if (drv_data->cpu_type == TYPE_EXYNOS5250) clk = devm_clk_get(dev, "usbhost"); else clk = devm_clk_get(dev, "otg"); if (IS_ERR(clk)) { dev_err(dev, "Failed to get otg clock\n"); return PTR_ERR(clk); } sphy->dev = dev; if (dev->of_node) { ret = samsung_usbphy_parse_dt(sphy); if (ret < 0) return ret; } else { if (!pdata) { dev_err(dev, "no platform data specified\n"); return -EINVAL; } } sphy->plat = pdata; sphy->regs = phy_base; sphy->clk = clk; sphy->drv_data = drv_data; sphy->phy.dev = sphy->dev; sphy->phy.label = "samsung-usbphy"; sphy->phy.init = samsung_usbphy_init; sphy->phy.shutdown = samsung_usbphy_shutdown; sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); sphy->phy.otg = otg; sphy->phy.otg->phy = &sphy->phy; sphy->phy.otg->set_host = samsung_usbphy_set_host; spin_lock_init(&sphy->lock); platform_set_drvdata(pdev, sphy); return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); } static int samsung_usbphy_remove(struct platform_device *pdev) { struct samsung_usbphy *sphy = platform_get_drvdata(pdev); usb_remove_phy(&sphy->phy); if (sphy->pmuregs) iounmap(sphy->pmuregs); if (sphy->sysreg) iounmap(sphy->sysreg); return 0; } static const struct samsung_usbphy_drvdata usbphy_s3c64xx = { .cpu_type = TYPE_S3C64XX, .devphy_en_mask = S3C64XX_USBPHY_ENABLE, }; static const struct samsung_usbphy_drvdata usbphy_exynos4 = { .cpu_type = TYPE_EXYNOS4210, .devphy_en_mask = EXYNOS_USBPHY_ENABLE, .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, }; static struct samsung_usbphy_drvdata usbphy_exynos5 = { .cpu_type = TYPE_EXYNOS5250, .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, }; #ifdef CONFIG_OF static const struct of_device_id samsung_usbphy_dt_match[] = { { .compatible = "samsung,s3c64xx-usbphy", .data = &usbphy_s3c64xx, }, { .compatible = "samsung,exynos4210-usbphy", .data = &usbphy_exynos4, }, { .compatible = "samsung,exynos5250-usbphy", .data = &usbphy_exynos5 }, {}, }; MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); #endif static struct platform_device_id samsung_usbphy_driver_ids[] = { { .name = "s3c64xx-usbphy", .driver_data = (unsigned long)&usbphy_s3c64xx, }, { .name = "exynos4210-usbphy", .driver_data = (unsigned long)&usbphy_exynos4, }, { .name = "exynos5250-usbphy", .driver_data = (unsigned long)&usbphy_exynos5, }, {}, }; MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); static struct platform_driver samsung_usbphy_driver = { .probe = samsung_usbphy_probe, .remove = samsung_usbphy_remove, .id_table = samsung_usbphy_driver_ids, .driver = { .name = "samsung-usbphy", .owner = THIS_MODULE, .of_match_table = of_match_ptr(samsung_usbphy_dt_match), }, }; module_platform_driver(samsung_usbphy_driver); MODULE_DESCRIPTION("Samsung USB phy controller"); MODULE_AUTHOR("Praveen Paneri "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:samsung-usbphy");