/*
 * VMEbus User access driver
 *
 * Author: Martyn Welch <martyn.welch@ge.com>
 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
 *
 * Based on work by:
 *   Tom Armistead and Ajit Prem
 *     Copyright 2004 Motorola Inc.
 *
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/cdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/syscalls.h>
#include <linux/types.h>

#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/vme.h>

#include "vme_user.h"

static DEFINE_MUTEX(vme_user_mutex);
static const char driver_name[] = "vme_user";

static int bus[VME_USER_BUS_MAX];
static unsigned int bus_num;

/* Currently Documentation/devices.txt defines the following for VME:
 *
 * 221 char	VME bus
 *		  0 = /dev/bus/vme/m0		First master image
 *		  1 = /dev/bus/vme/m1		Second master image
 *		  2 = /dev/bus/vme/m2		Third master image
 *		  3 = /dev/bus/vme/m3		Fourth master image
 *		  4 = /dev/bus/vme/s0		First slave image
 *		  5 = /dev/bus/vme/s1		Second slave image
 *		  6 = /dev/bus/vme/s2		Third slave image
 *		  7 = /dev/bus/vme/s3		Fourth slave image
 *		  8 = /dev/bus/vme/ctl		Control
 *
 *		It is expected that all VME bus drivers will use the
 *		same interface.  For interface documentation see
 *		http://www.vmelinux.org/.
 *
 * However the VME driver at http://www.vmelinux.org/ is rather old and doesn't
 * even support the tsi148 chipset (which has 8 master and 8 slave windows).
 * We'll run with this for now as far as possible, however it probably makes
 * sense to get rid of the old mappings and just do everything dynamically.
 *
 * So for now, we'll restrict the driver to providing 4 masters and 4 slaves as
 * defined above and try to support at least some of the interface from
 * http://www.vmelinux.org/ as an alternative the driver can be written
 * providing a saner interface later.
 *
 * The vmelinux.org driver never supported slave images, the devices reserved
 * for slaves were repurposed to support all 8 master images on the UniverseII!
 * We shall support 4 masters and 4 slaves with this driver.
 */
#define VME_MAJOR	221	/* VME Major Device Number */
#define VME_DEVS	9	/* Number of dev entries */

#define MASTER_MINOR	0
#define MASTER_MAX	3
#define SLAVE_MINOR	4
#define SLAVE_MAX	7
#define CONTROL_MINOR	8

#define PCI_BUF_SIZE  0x20000	/* Size of one slave image buffer */

/*
 * Structure to handle image related parameters.
 */
struct image_desc {
	void *kern_buf;	/* Buffer address in kernel space */
	dma_addr_t pci_buf;	/* Buffer address in PCI address space */
	unsigned long long size_buf;	/* Buffer size */
	struct mutex mutex;	/* Mutex for locking image */
	struct device *device;	/* Sysfs device */
	struct vme_resource *resource;	/* VME resource */
	int users;		/* Number of current users */
};
static struct image_desc image[VME_DEVS];

struct driver_stats {
	unsigned long reads;
	unsigned long writes;
	unsigned long ioctls;
	unsigned long irqs;
	unsigned long berrs;
	unsigned long dmaErrors;
	unsigned long timeouts;
	unsigned long external;
};
static struct driver_stats statistics;

static struct cdev *vme_user_cdev;		/* Character device */
static struct class *vme_user_sysfs_class;	/* Sysfs class */
static struct vme_dev *vme_user_bridge;		/* Pointer to user device */


static const int type[VME_DEVS] = {	MASTER_MINOR,	MASTER_MINOR,
					MASTER_MINOR,	MASTER_MINOR,
					SLAVE_MINOR,	SLAVE_MINOR,
					SLAVE_MINOR,	SLAVE_MINOR,
					CONTROL_MINOR
				};


static int vme_user_open(struct inode *, struct file *);
static int vme_user_release(struct inode *, struct file *);
static ssize_t vme_user_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t vme_user_write(struct file *, const char __user *, size_t,
	loff_t *);
static loff_t vme_user_llseek(struct file *, loff_t, int);
static long vme_user_unlocked_ioctl(struct file *, unsigned int, unsigned long);

static int vme_user_match(struct vme_dev *);
static int vme_user_probe(struct vme_dev *);
static int vme_user_remove(struct vme_dev *);

static const struct file_operations vme_user_fops = {
	.open = vme_user_open,
	.release = vme_user_release,
	.read = vme_user_read,
	.write = vme_user_write,
	.llseek = vme_user_llseek,
	.unlocked_ioctl = vme_user_unlocked_ioctl,
};


/*
 * Reset all the statistic counters
 */
static void reset_counters(void)
{
	statistics.reads = 0;
	statistics.writes = 0;
	statistics.ioctls = 0;
	statistics.irqs = 0;
	statistics.berrs = 0;
	statistics.dmaErrors = 0;
	statistics.timeouts = 0;
}

static int vme_user_open(struct inode *inode, struct file *file)
{
	int err;
	unsigned int minor = MINOR(inode->i_rdev);

	mutex_lock(&image[minor].mutex);
	/* Allow device to be opened if a resource is needed and allocated. */
	if (minor < CONTROL_MINOR && image[minor].resource == NULL) {
		pr_err("No resources allocated for device\n");
		err = -EINVAL;
		goto err_res;
	}

	/* Increment user count */
	image[minor].users++;

	mutex_unlock(&image[minor].mutex);

	return 0;

err_res:
	mutex_unlock(&image[minor].mutex);

	return err;
}

static int vme_user_release(struct inode *inode, struct file *file)
{
	unsigned int minor = MINOR(inode->i_rdev);

	mutex_lock(&image[minor].mutex);

	/* Decrement user count */
	image[minor].users--;

	mutex_unlock(&image[minor].mutex);

	return 0;
}

/*
 * We are going ot alloc a page during init per window for small transfers.
 * Small transfers will go VME -> buffer -> user space. Larger (more than a
 * page) transfers will lock the user space buffer into memory and then
 * transfer the data directly into the user space buffers.
 */
static ssize_t resource_to_user(int minor, char __user *buf, size_t count,
	loff_t *ppos)
{
	ssize_t retval;
	ssize_t copied = 0;

	if (count <= image[minor].size_buf) {
		/* We copy to kernel buffer */
		copied = vme_master_read(image[minor].resource,
			image[minor].kern_buf, count, *ppos);
		if (copied < 0)
			return (int)copied;

		retval = __copy_to_user(buf, image[minor].kern_buf,
			(unsigned long)copied);
		if (retval != 0) {
			copied = (copied - retval);
			pr_info("User copy failed\n");
			return -EINVAL;
		}

	} else {
		/* XXX Need to write this */
		pr_info("Currently don't support large transfers\n");
		/* Map in pages from userspace */

		/* Call vme_master_read to do the transfer */
		return -EINVAL;
	}

	return copied;
}

/*
 * We are going to alloc a page during init per window for small transfers.
 * Small transfers will go user space -> buffer -> VME. Larger (more than a
 * page) transfers will lock the user space buffer into memory and then
 * transfer the data directly from the user space buffers out to VME.
 */
static ssize_t resource_from_user(unsigned int minor, const char __user *buf,
	size_t count, loff_t *ppos)
{
	ssize_t retval;
	ssize_t copied = 0;

	if (count <= image[minor].size_buf) {
		retval = __copy_from_user(image[minor].kern_buf, buf,
			(unsigned long)count);
		if (retval != 0)
			copied = (copied - retval);
		else
			copied = count;

		copied = vme_master_write(image[minor].resource,
			image[minor].kern_buf, copied, *ppos);
	} else {
		/* XXX Need to write this */
		pr_info("Currently don't support large transfers\n");
		/* Map in pages from userspace */

		/* Call vme_master_write to do the transfer */
		return -EINVAL;
	}

	return copied;
}

static ssize_t buffer_to_user(unsigned int minor, char __user *buf,
	size_t count, loff_t *ppos)
{
	void *image_ptr;
	ssize_t retval;

	image_ptr = image[minor].kern_buf + *ppos;

	retval = __copy_to_user(buf, image_ptr, (unsigned long)count);
	if (retval != 0) {
		retval = (count - retval);
		pr_warn("Partial copy to userspace\n");
	} else
		retval = count;

	/* Return number of bytes successfully read */
	return retval;
}

static ssize_t buffer_from_user(unsigned int minor, const char __user *buf,
	size_t count, loff_t *ppos)
{
	void *image_ptr;
	size_t retval;

	image_ptr = image[minor].kern_buf + *ppos;

	retval = __copy_from_user(image_ptr, buf, (unsigned long)count);
	if (retval != 0) {
		retval = (count - retval);
		pr_warn("Partial copy to userspace\n");
	} else
		retval = count;

	/* Return number of bytes successfully read */
	return retval;
}

static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count,
			loff_t *ppos)
{
	unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
	ssize_t retval;
	size_t image_size;
	size_t okcount;

	if (minor == CONTROL_MINOR)
		return 0;

	mutex_lock(&image[minor].mutex);

	/* XXX Do we *really* want this helper - we can use vme_*_get ? */
	image_size = vme_get_size(image[minor].resource);

	/* Ensure we are starting at a valid location */
	if ((*ppos < 0) || (*ppos > (image_size - 1))) {
		mutex_unlock(&image[minor].mutex);
		return 0;
	}

	/* Ensure not reading past end of the image */
	if (*ppos + count > image_size)
		okcount = image_size - *ppos;
	else
		okcount = count;

	switch (type[minor]) {
	case MASTER_MINOR:
		retval = resource_to_user(minor, buf, okcount, ppos);
		break;
	case SLAVE_MINOR:
		retval = buffer_to_user(minor, buf, okcount, ppos);
		break;
	default:
		retval = -EINVAL;
	}

	mutex_unlock(&image[minor].mutex);
	if (retval > 0)
		*ppos += retval;

	return retval;
}

static ssize_t vme_user_write(struct file *file, const char __user *buf,
			size_t count, loff_t *ppos)
{
	unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
	ssize_t retval;
	size_t image_size;
	size_t okcount;

	if (minor == CONTROL_MINOR)
		return 0;

	mutex_lock(&image[minor].mutex);

	image_size = vme_get_size(image[minor].resource);

	/* Ensure we are starting at a valid location */
	if ((*ppos < 0) || (*ppos > (image_size - 1))) {
		mutex_unlock(&image[minor].mutex);
		return 0;
	}

	/* Ensure not reading past end of the image */
	if (*ppos + count > image_size)
		okcount = image_size - *ppos;
	else
		okcount = count;

	switch (type[minor]) {
	case MASTER_MINOR:
		retval = resource_from_user(minor, buf, okcount, ppos);
		break;
	case SLAVE_MINOR:
		retval = buffer_from_user(minor, buf, okcount, ppos);
		break;
	default:
		retval = -EINVAL;
	}

	mutex_unlock(&image[minor].mutex);

	if (retval > 0)
		*ppos += retval;

	return retval;
}

static loff_t vme_user_llseek(struct file *file, loff_t off, int whence)
{
	loff_t absolute = -1;
	unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
	size_t image_size;

	if (minor == CONTROL_MINOR)
		return -EINVAL;

	mutex_lock(&image[minor].mutex);
	image_size = vme_get_size(image[minor].resource);

	switch (whence) {
	case SEEK_SET:
		absolute = off;
		break;
	case SEEK_CUR:
		absolute = file->f_pos + off;
		break;
	case SEEK_END:
		absolute = image_size + off;
		break;
	default:
		mutex_unlock(&image[minor].mutex);
		return -EINVAL;
		break;
	}

	if ((absolute < 0) || (absolute >= image_size)) {
		mutex_unlock(&image[minor].mutex);
		return -EINVAL;
	}

	file->f_pos = absolute;

	mutex_unlock(&image[minor].mutex);

	return absolute;
}

/*
 * The ioctls provided by the old VME access method (the one at vmelinux.org)
 * are most certainly wrong as the effectively push the registers layout
 * through to user space. Given that the VME core can handle multiple bridges,
 * with different register layouts this is most certainly not the way to go.
 *
 * We aren't using the structures defined in the Motorola driver either - these
 * are also quite low level, however we should use the definitions that have
 * already been defined.
 */
static int vme_user_ioctl(struct inode *inode, struct file *file,
	unsigned int cmd, unsigned long arg)
{
	struct vme_master master;
	struct vme_slave slave;
	struct vme_irq_id irq_req;
	unsigned long copied;
	unsigned int minor = MINOR(inode->i_rdev);
	int retval;
	dma_addr_t pci_addr;
	void __user *argp = (void __user *)arg;

	statistics.ioctls++;

	switch (type[minor]) {
	case CONTROL_MINOR:
		switch (cmd) {
		case VME_IRQ_GEN:
			copied = copy_from_user(&irq_req, argp,
						sizeof(struct vme_irq_id));
			if (copied != 0) {
				pr_warn("Partial copy from userspace\n");
				return -EFAULT;
			}

			retval = vme_irq_generate(vme_user_bridge,
						  irq_req.level,
						  irq_req.statid);

			return retval;
		}
		break;
	case MASTER_MINOR:
		switch (cmd) {
		case VME_GET_MASTER:
			memset(&master, 0, sizeof(struct vme_master));

			/* XXX	We do not want to push aspace, cycle and width
			 *	to userspace as they are
			 */
			retval = vme_master_get(image[minor].resource,
				&master.enable, &master.vme_addr,
				&master.size, &master.aspace,
				&master.cycle, &master.dwidth);

			copied = copy_to_user(argp, &master,
				sizeof(struct vme_master));
			if (copied != 0) {
				pr_warn("Partial copy to userspace\n");
				return -EFAULT;
			}

			return retval;
			break;

		case VME_SET_MASTER:

			copied = copy_from_user(&master, argp, sizeof(master));
			if (copied != 0) {
				pr_warn("Partial copy from userspace\n");
				return -EFAULT;
			}

			/* XXX	We do not want to push aspace, cycle and width
			 *	to userspace as they are
			 */
			return vme_master_set(image[minor].resource,
				master.enable, master.vme_addr, master.size,
				master.aspace, master.cycle, master.dwidth);

			break;
		}
		break;
	case SLAVE_MINOR:
		switch (cmd) {
		case VME_GET_SLAVE:
			memset(&slave, 0, sizeof(struct vme_slave));

			/* XXX	We do not want to push aspace, cycle and width
			 *	to userspace as they are
			 */
			retval = vme_slave_get(image[minor].resource,
				&slave.enable, &slave.vme_addr,
				&slave.size, &pci_addr, &slave.aspace,
				&slave.cycle);

			copied = copy_to_user(argp, &slave,
				sizeof(struct vme_slave));
			if (copied != 0) {
				pr_warn("Partial copy to userspace\n");
				return -EFAULT;
			}

			return retval;
			break;

		case VME_SET_SLAVE:

			copied = copy_from_user(&slave, argp, sizeof(slave));
			if (copied != 0) {
				pr_warn("Partial copy from userspace\n");
				return -EFAULT;
			}

			/* XXX	We do not want to push aspace, cycle and width
			 *	to userspace as they are
			 */
			return vme_slave_set(image[minor].resource,
				slave.enable, slave.vme_addr, slave.size,
				image[minor].pci_buf, slave.aspace,
				slave.cycle);

			break;
		}
		break;
	}

	return -EINVAL;
}

static long
vme_user_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
	int ret;

	mutex_lock(&vme_user_mutex);
	ret = vme_user_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
	mutex_unlock(&vme_user_mutex);

	return ret;
}


/*
 * Unallocate a previously allocated buffer
 */
static void buf_unalloc(int num)
{
	if (image[num].kern_buf) {
#ifdef VME_DEBUG
		pr_debug("UniverseII:Releasing buffer at %p\n",
			 image[num].pci_buf);
#endif

		vme_free_consistent(image[num].resource, image[num].size_buf,
			image[num].kern_buf, image[num].pci_buf);

		image[num].kern_buf = NULL;
		image[num].pci_buf = 0;
		image[num].size_buf = 0;

#ifdef VME_DEBUG
	} else {
		pr_debug("UniverseII: Buffer not allocated\n");
#endif
	}
}

static struct vme_driver vme_user_driver = {
	.name = driver_name,
	.match = vme_user_match,
	.probe = vme_user_probe,
	.remove = vme_user_remove,
};


static int __init vme_user_init(void)
{
	int retval = 0;

	pr_info("VME User Space Access Driver\n");

	if (bus_num == 0) {
		pr_err("No cards, skipping registration\n");
		retval = -ENODEV;
		goto err_nocard;
	}

	/* Let's start by supporting one bus, we can support more than one
	 * in future revisions if that ever becomes necessary.
	 */
	if (bus_num > VME_USER_BUS_MAX) {
		pr_err("Driver only able to handle %d buses\n",
		       VME_USER_BUS_MAX);
		bus_num = VME_USER_BUS_MAX;
	}

	/*
	 * Here we just register the maximum number of devices we can and
	 * leave vme_user_match() to allow only 1 to go through to probe().
	 * This way, if we later want to allow multiple user access devices,
	 * we just change the code in vme_user_match().
	 */
	retval = vme_register_driver(&vme_user_driver, VME_MAX_SLOTS);
	if (retval != 0)
		goto err_reg;

	return retval;

err_reg:
err_nocard:
	return retval;
}

static int vme_user_match(struct vme_dev *vdev)
{
	if (vdev->num >= VME_USER_BUS_MAX)
		return 0;
	return 1;
}

/*
 * In this simple access driver, the old behaviour is being preserved as much
 * as practical. We will therefore reserve the buffers and request the images
 * here so that we don't have to do it later.
 */
static int vme_user_probe(struct vme_dev *vdev)
{
	int i, err;
	char name[12];

	/* Save pointer to the bridge device */
	if (vme_user_bridge != NULL) {
		dev_err(&vdev->dev, "Driver can only be loaded for 1 device\n");
		err = -EINVAL;
		goto err_dev;
	}
	vme_user_bridge = vdev;

	/* Initialise descriptors */
	for (i = 0; i < VME_DEVS; i++) {
		image[i].kern_buf = NULL;
		image[i].pci_buf = 0;
		mutex_init(&image[i].mutex);
		image[i].device = NULL;
		image[i].resource = NULL;
		image[i].users = 0;
	}

	/* Initialise statistics counters */
	reset_counters();

	/* Assign major and minor numbers for the driver */
	err = register_chrdev_region(MKDEV(VME_MAJOR, 0), VME_DEVS,
		driver_name);
	if (err) {
		dev_warn(&vdev->dev, "Error getting Major Number %d for driver.\n",
			 VME_MAJOR);
		goto err_region;
	}

	/* Register the driver as a char device */
	vme_user_cdev = cdev_alloc();
	vme_user_cdev->ops = &vme_user_fops;
	vme_user_cdev->owner = THIS_MODULE;
	err = cdev_add(vme_user_cdev, MKDEV(VME_MAJOR, 0), VME_DEVS);
	if (err) {
		dev_warn(&vdev->dev, "cdev_all failed\n");
		goto err_char;
	}

	/* Request slave resources and allocate buffers (128kB wide) */
	for (i = SLAVE_MINOR; i < (SLAVE_MAX + 1); i++) {
		/* XXX Need to properly request attributes */
		/* For ca91cx42 bridge there are only two slave windows
		 * supporting A16 addressing, so we request A24 supported
		 * by all windows.
		 */
		image[i].resource = vme_slave_request(vme_user_bridge,
			VME_A24, VME_SCT);
		if (image[i].resource == NULL) {
			dev_warn(&vdev->dev,
				 "Unable to allocate slave resource\n");
			goto err_slave;
		}
		image[i].size_buf = PCI_BUF_SIZE;
		image[i].kern_buf = vme_alloc_consistent(image[i].resource,
			image[i].size_buf, &image[i].pci_buf);
		if (image[i].kern_buf == NULL) {
			dev_warn(&vdev->dev,
				 "Unable to allocate memory for buffer\n");
			image[i].pci_buf = 0;
			vme_slave_free(image[i].resource);
			err = -ENOMEM;
			goto err_slave;
		}
	}

	/*
	 * Request master resources allocate page sized buffers for small
	 * reads and writes
	 */
	for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++) {
		/* XXX Need to properly request attributes */
		image[i].resource = vme_master_request(vme_user_bridge,
			VME_A32, VME_SCT, VME_D32);
		if (image[i].resource == NULL) {
			dev_warn(&vdev->dev,
				 "Unable to allocate master resource\n");
			goto err_master;
		}
		image[i].size_buf = PCI_BUF_SIZE;
		image[i].kern_buf = kmalloc(image[i].size_buf, GFP_KERNEL);
		if (image[i].kern_buf == NULL) {
			dev_warn(&vdev->dev,
				 "Unable to allocate memory for master window buffers\n");
			err = -ENOMEM;
			goto err_master_buf;
		}
	}

	/* Create sysfs entries - on udev systems this creates the dev files */
	vme_user_sysfs_class = class_create(THIS_MODULE, driver_name);
	if (IS_ERR(vme_user_sysfs_class)) {
		dev_err(&vdev->dev, "Error creating vme_user class.\n");
		err = PTR_ERR(vme_user_sysfs_class);
		goto err_class;
	}

	/* Add sysfs Entries */
	for (i = 0; i < VME_DEVS; i++) {
		int num;
		switch (type[i]) {
		case MASTER_MINOR:
			sprintf(name, "bus/vme/m%%d");
			break;
		case CONTROL_MINOR:
			sprintf(name, "bus/vme/ctl");
			break;
		case SLAVE_MINOR:
			sprintf(name, "bus/vme/s%%d");
			break;
		default:
			err = -EINVAL;
			goto err_sysfs;
			break;
		}

		num = (type[i] == SLAVE_MINOR) ? i - (MASTER_MAX + 1) : i;
		image[i].device = device_create(vme_user_sysfs_class, NULL,
					MKDEV(VME_MAJOR, i), NULL, name, num);
		if (IS_ERR(image[i].device)) {
			dev_info(&vdev->dev, "Error creating sysfs device\n");
			err = PTR_ERR(image[i].device);
			goto err_sysfs;
		}
	}

	return 0;

	/* Ensure counter set correcty to destroy all sysfs devices */
	i = VME_DEVS;
err_sysfs:
	while (i > 0) {
		i--;
		device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i));
	}
	class_destroy(vme_user_sysfs_class);

	/* Ensure counter set correcty to unalloc all master windows */
	i = MASTER_MAX + 1;
err_master_buf:
	for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++)
		kfree(image[i].kern_buf);
err_master:
	while (i > MASTER_MINOR) {
		i--;
		vme_master_free(image[i].resource);
	}

	/*
	 * Ensure counter set correcty to unalloc all slave windows and buffers
	 */
	i = SLAVE_MAX + 1;
err_slave:
	while (i > SLAVE_MINOR) {
		i--;
		buf_unalloc(i);
		vme_slave_free(image[i].resource);
	}
err_class:
	cdev_del(vme_user_cdev);
err_char:
	unregister_chrdev_region(MKDEV(VME_MAJOR, 0), VME_DEVS);
err_region:
err_dev:
	return err;
}

static int vme_user_remove(struct vme_dev *dev)
{
	int i;

	/* Remove sysfs Entries */
	for (i = 0; i < VME_DEVS; i++) {
		mutex_destroy(&image[i].mutex);
		device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i));
	}
	class_destroy(vme_user_sysfs_class);

	for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++) {
		kfree(image[i].kern_buf);
		vme_master_free(image[i].resource);
	}

	for (i = SLAVE_MINOR; i < (SLAVE_MAX + 1); i++) {
		vme_slave_set(image[i].resource, 0, 0, 0, 0, VME_A32, 0);
		buf_unalloc(i);
		vme_slave_free(image[i].resource);
	}

	/* Unregister device driver */
	cdev_del(vme_user_cdev);

	/* Unregiser the major and minor device numbers */
	unregister_chrdev_region(MKDEV(VME_MAJOR, 0), VME_DEVS);

	return 0;
}

static void __exit vme_user_exit(void)
{
	vme_unregister_driver(&vme_user_driver);
}


MODULE_PARM_DESC(bus, "Enumeration of VMEbus to which the driver is connected");
module_param_array(bus, int, &bus_num, 0);

MODULE_DESCRIPTION("VME User Space Access Driver");
MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
MODULE_LICENSE("GPL");

module_init(vme_user_init);
module_exit(vme_user_exit);