/* * Copyright (C) ST-Ericsson SA 2013 * * Author: Patrice Chotard * License terms: GNU General Public License (GPL) version 2 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pinctrl-abx500.h" /* * The AB9540 and AB8540 GPIO support are extended versions * of the AB8500 GPIO support. * The AB9540 supports an additional (7th) register so that * more GPIO may be configured and used. * The AB8540 supports 4 new gpios (GPIOx_VBAT) that have * internal pull-up and pull-down capabilities. */ /* * GPIO registers offset * Bank: 0x10 */ #define AB8500_GPIO_SEL1_REG 0x00 #define AB8500_GPIO_SEL2_REG 0x01 #define AB8500_GPIO_SEL3_REG 0x02 #define AB8500_GPIO_SEL4_REG 0x03 #define AB8500_GPIO_SEL5_REG 0x04 #define AB8500_GPIO_SEL6_REG 0x05 #define AB9540_GPIO_SEL7_REG 0x06 #define AB8500_GPIO_DIR1_REG 0x10 #define AB8500_GPIO_DIR2_REG 0x11 #define AB8500_GPIO_DIR3_REG 0x12 #define AB8500_GPIO_DIR4_REG 0x13 #define AB8500_GPIO_DIR5_REG 0x14 #define AB8500_GPIO_DIR6_REG 0x15 #define AB9540_GPIO_DIR7_REG 0x16 #define AB8500_GPIO_OUT1_REG 0x20 #define AB8500_GPIO_OUT2_REG 0x21 #define AB8500_GPIO_OUT3_REG 0x22 #define AB8500_GPIO_OUT4_REG 0x23 #define AB8500_GPIO_OUT5_REG 0x24 #define AB8500_GPIO_OUT6_REG 0x25 #define AB9540_GPIO_OUT7_REG 0x26 #define AB8500_GPIO_PUD1_REG 0x30 #define AB8500_GPIO_PUD2_REG 0x31 #define AB8500_GPIO_PUD3_REG 0x32 #define AB8500_GPIO_PUD4_REG 0x33 #define AB8500_GPIO_PUD5_REG 0x34 #define AB8500_GPIO_PUD6_REG 0x35 #define AB9540_GPIO_PUD7_REG 0x36 #define AB8500_GPIO_IN1_REG 0x40 #define AB8500_GPIO_IN2_REG 0x41 #define AB8500_GPIO_IN3_REG 0x42 #define AB8500_GPIO_IN4_REG 0x43 #define AB8500_GPIO_IN5_REG 0x44 #define AB8500_GPIO_IN6_REG 0x45 #define AB9540_GPIO_IN7_REG 0x46 #define AB8540_GPIO_VINSEL_REG 0x47 #define AB8540_GPIO_PULL_UPDOWN_REG 0x48 #define AB8500_GPIO_ALTFUN_REG 0x50 #define AB8540_GPIO_PULL_UPDOWN_MASK 0x03 #define AB8540_GPIO_VINSEL_MASK 0x03 #define AB8540_GPIOX_VBAT_START 51 #define AB8540_GPIOX_VBAT_END 54 struct abx500_pinctrl { struct device *dev; struct pinctrl_dev *pctldev; struct abx500_pinctrl_soc_data *soc; struct gpio_chip chip; struct ab8500 *parent; struct mutex lock; struct abx500_gpio_irq_cluster *irq_cluster; int irq_cluster_size; }; /** * to_abx500_pinctrl() - get the pointer to abx500_pinctrl * @chip: Member of the structure abx500_pinctrl */ static inline struct abx500_pinctrl *to_abx500_pinctrl(struct gpio_chip *chip) { return container_of(chip, struct abx500_pinctrl, chip); } static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg, unsigned offset, bool *bit) { struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); u8 pos = offset % 8; u8 val; int ret; reg += offset / 8; ret = abx500_get_register_interruptible(pct->dev, AB8500_MISC, reg, &val); *bit = !!(val & BIT(pos)); if (ret < 0) dev_err(pct->dev, "%s read reg =%x, offset=%x failed\n", __func__, reg, offset); return ret; } static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg, unsigned offset, int val) { struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); u8 pos = offset % 8; int ret; reg += offset / 8; ret = abx500_mask_and_set_register_interruptible(pct->dev, AB8500_MISC, reg, BIT(pos), val << pos); if (ret < 0) dev_err(pct->dev, "%s write failed\n", __func__); return ret; } /** * abx500_gpio_get() - Get the particular GPIO value * @chip: Gpio device * @offset: GPIO number to read */ static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset) { struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); bool bit; int ret; ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG, offset, &bit); if (ret < 0) { dev_err(pct->dev, "%s failed\n", __func__); return ret; } return bit; } static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) { struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); int ret; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); if (ret < 0) dev_err(pct->dev, "%s write failed\n", __func__); } static int abx500_config_pull_updown(struct abx500_pinctrl *pct, int offset, enum abx500_gpio_pull_updown val) { u8 pos; int ret; struct pullud *pullud; if (!pct->soc->pullud) { dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature", __func__); ret = -EPERM; goto out; } pullud = pct->soc->pullud; if ((offset < pullud->first_pin) || (offset > pullud->last_pin)) { ret = -EINVAL; goto out; } pos = offset << 1; ret = abx500_mask_and_set_register_interruptible(pct->dev, AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos); out: if (ret < 0) dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); return ret; } static int abx500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int val) { struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); struct pullud *pullud = pct->soc->pullud; unsigned gpio; int ret; /* set direction as output */ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); if (ret < 0) return ret; /* disable pull down */ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); if (ret < 0) return ret; /* if supported, disable both pull down and pull up */ gpio = offset + 1; if (pullud && gpio >= pullud->first_pin && gpio <= pullud->last_pin) { ret = abx500_config_pull_updown(pct, gpio, ABX500_GPIO_PULL_NONE); if (ret < 0) return ret; } /* set the output as 1 or 0 */ return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); } static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { /* set the register as input */ return abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); } static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); /* The AB8500 GPIO numbers are off by one */ int gpio = offset + 1; int hwirq; int i; for (i = 0; i < pct->irq_cluster_size; i++) { struct abx500_gpio_irq_cluster *cluster = &pct->irq_cluster[i]; if (gpio >= cluster->start && gpio <= cluster->end) { /* * The ABx500 GPIO's associated IRQs are clustered together * throughout the interrupt numbers at irregular intervals. * To solve this quandry, we have placed the read-in values * into the cluster information table. */ hwirq = gpio - cluster->start + cluster->to_irq; return irq_create_mapping(pct->parent->domain, hwirq); } } return -EINVAL; } static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, unsigned gpio, int alt_setting) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); struct alternate_functions af = pct->soc->alternate_functions[gpio]; int ret; int val; unsigned offset; const char *modes[] = { [ABX500_DEFAULT] = "default", [ABX500_ALT_A] = "altA", [ABX500_ALT_B] = "altB", [ABX500_ALT_C] = "altC", }; /* sanity check */ if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) || ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) || ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) { dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio, modes[alt_setting]); return -EINVAL; } /* on ABx5xx, there is no GPIO0, so adjust the offset */ offset = gpio - 1; switch (alt_setting) { case ABX500_DEFAULT: /* * for ABx5xx family, default mode is always selected by * writing 0 to GPIOSELx register, except for pins which * support at least ALT_B mode, default mode is selected * by writing 1 to GPIOSELx register */ val = 0; if (af.alt_bit1 != UNUSED) val++; ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, offset, val); break; case ABX500_ALT_A: /* * for ABx5xx family, alt_a mode is always selected by * writing 1 to GPIOSELx register, except for pins which * support at least ALT_B mode, alt_a mode is selected * by writing 0 to GPIOSELx register and 0 in ALTFUNC * register */ if (af.alt_bit1 != UNUSED) { ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, offset, 0); ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit1, !!(af.alta_val && BIT(0))); if (af.alt_bit2 != UNUSED) ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2, !!(af.alta_val && BIT(1))); } else ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, offset, 1); break; case ABX500_ALT_B: ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, offset, 0); ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit1, !!(af.altb_val && BIT(0))); if (af.alt_bit2 != UNUSED) ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2, !!(af.altb_val && BIT(1))); break; case ABX500_ALT_C: ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, offset, 0); ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2, !!(af.altc_val && BIT(0))); ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2, !!(af.altc_val && BIT(1))); break; default: dev_dbg(pct->dev, "unknow alt_setting %d\n", alt_setting); return -EINVAL; } return ret; } static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, unsigned gpio) { u8 mode; bool bit_mode; bool alt_bit1; bool alt_bit2; struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); struct alternate_functions af = pct->soc->alternate_functions[gpio]; /* on ABx5xx, there is no GPIO0, so adjust the offset */ unsigned offset = gpio - 1; /* * if gpiosel_bit is set to unused, * it means no GPIO or special case */ if (af.gpiosel_bit == UNUSED) return ABX500_DEFAULT; /* read GpioSelx register */ abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8), af.gpiosel_bit, &bit_mode); mode = bit_mode; /* sanity check */ if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) || (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) { dev_err(pct->dev, "alt_bitX value not in correct range (-1 to 7)\n"); return -EINVAL; } /* if alt_bit2 is used, alt_bit1 must be used too */ if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) { dev_err(pct->dev, "if alt_bit2 is used, alt_bit1 can't be unused\n"); return -EINVAL; } /* check if pin use AlternateFunction register */ if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED)) return mode; /* * if pin GPIOSEL bit is set and pin supports alternate function, * it means DEFAULT mode */ if (mode) return ABX500_DEFAULT; /* * pin use the AlternatFunction register * read alt_bit1 value */ abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit1, &alt_bit1); if (af.alt_bit2 != UNUSED) /* read alt_bit2 value */ abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2, &alt_bit2); else alt_bit2 = 0; mode = (alt_bit2 << 1) + alt_bit1; if (mode == af.alta_val) return ABX500_ALT_A; else if (mode == af.altb_val) return ABX500_ALT_B; else return ABX500_ALT_C; } #ifdef CONFIG_DEBUG_FS #include static void abx500_gpio_dbg_show_one(struct seq_file *s, struct pinctrl_dev *pctldev, struct gpio_chip *chip, unsigned offset, unsigned gpio) { const char *label = gpiochip_is_requested(chip, offset - 1); u8 gpio_offset = offset - 1; int mode = -1; bool is_out; bool pull; const char *modes[] = { [ABX500_DEFAULT] = "default", [ABX500_ALT_A] = "altA", [ABX500_ALT_B] = "altB", [ABX500_ALT_C] = "altC", }; abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, gpio_offset, &is_out); abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, gpio_offset, &pull); if (pctldev) mode = abx500_get_mode(pctldev, chip, offset); seq_printf(s, " gpio-%-3d (%-20.20s) %-3s %-9s %s", gpio, label ?: "(none)", is_out ? "out" : "in ", is_out ? (chip->get ? (chip->get(chip, offset) ? "hi" : "lo") : "? ") : (pull ? "pull up" : "pull down"), (mode < 0) ? "unknown" : modes[mode]); } static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { unsigned i; unsigned gpio = chip->base; struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); struct pinctrl_dev *pctldev = pct->pctldev; for (i = 0; i < chip->ngpio; i++, gpio++) { /* On AB8500, there is no GPIO0, the first is the GPIO 1 */ abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio); seq_printf(s, "\n"); } } #else static inline void abx500_gpio_dbg_show_one(struct seq_file *s, struct pinctrl_dev *pctldev, struct gpio_chip *chip, unsigned offset, unsigned gpio) { } #define abx500_gpio_dbg_show NULL #endif int abx500_gpio_request(struct gpio_chip *chip, unsigned offset) { int gpio = chip->base + offset; return pinctrl_request_gpio(gpio); } void abx500_gpio_free(struct gpio_chip *chip, unsigned offset) { int gpio = chip->base + offset; pinctrl_free_gpio(gpio); } static struct gpio_chip abx500gpio_chip = { .label = "abx500-gpio", .owner = THIS_MODULE, .request = abx500_gpio_request, .free = abx500_gpio_free, .direction_input = abx500_gpio_direction_input, .get = abx500_gpio_get, .direction_output = abx500_gpio_direction_output, .set = abx500_gpio_set, .to_irq = abx500_gpio_to_irq, .dbg_show = abx500_gpio_dbg_show, }; static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); return pct->soc->nfunctions; } static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev, unsigned function) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); return pct->soc->functions[function].name; } static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev, unsigned function, const char * const **groups, unsigned * const num_groups) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); *groups = pct->soc->functions[function].groups; *num_groups = pct->soc->functions[function].ngroups; return 0; } static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function, unsigned group) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); struct gpio_chip *chip = &pct->chip; const struct abx500_pingroup *g; int i; int ret = 0; g = &pct->soc->groups[group]; if (g->altsetting < 0) return -EINVAL; dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins); for (i = 0; i < g->npins; i++) { dev_dbg(pct->dev, "setting pin %d to altsetting %d\n", g->pins[i], g->altsetting); ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting); } return ret; } static void abx500_pmx_disable(struct pinctrl_dev *pctldev, unsigned function, unsigned group) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); const struct abx500_pingroup *g; g = &pct->soc->groups[group]; if (g->altsetting < 0) return; /* FIXME: poke out the mux, set the pin to some default state? */ dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins); } int abx500_gpio_request_enable(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); const struct abx500_pinrange *p; int ret; int i; /* * Different ranges have different ways to enable GPIO function on a * pin, so refer back to our local range type, where we handily define * what altfunc enables GPIO for a certain pin. */ for (i = 0; i < pct->soc->gpio_num_ranges; i++) { p = &pct->soc->gpio_ranges[i]; if ((offset >= p->offset) && (offset < (p->offset + p->npins))) break; } if (i == pct->soc->gpio_num_ranges) { dev_err(pct->dev, "%s failed to locate range\n", __func__); return -ENODEV; } dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n", p->altfunc, offset); ret = abx500_set_mode(pct->pctldev, &pct->chip, offset, p->altfunc); if (ret < 0) { dev_err(pct->dev, "%s setting altfunc failed\n", __func__); return ret; } return ret; } static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset) { } static struct pinmux_ops abx500_pinmux_ops = { .get_functions_count = abx500_pmx_get_funcs_cnt, .get_function_name = abx500_pmx_get_func_name, .get_function_groups = abx500_pmx_get_func_groups, .enable = abx500_pmx_enable, .disable = abx500_pmx_disable, .gpio_request_enable = abx500_gpio_request_enable, .gpio_disable_free = abx500_gpio_disable_free, }; static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); return pct->soc->ngroups; } static const char *abx500_get_group_name(struct pinctrl_dev *pctldev, unsigned selector) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); return pct->soc->groups[selector].name; } static int abx500_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, const unsigned **pins, unsigned *num_pins) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); *pins = pct->soc->groups[selector].pins; *num_pins = pct->soc->groups[selector].npins; return 0; } static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, unsigned offset) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); struct gpio_chip *chip = &pct->chip; abx500_gpio_dbg_show_one(s, pctldev, chip, offset, chip->base + offset - 1); } static struct pinctrl_ops abx500_pinctrl_ops = { .get_groups_count = abx500_get_groups_cnt, .get_group_name = abx500_get_group_name, .get_group_pins = abx500_get_group_pins, .pin_dbg_show = abx500_pin_dbg_show, }; int abx500_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config) { return -ENOSYS; } int abx500_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, unsigned long config) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); struct pullud *pullud = pct->soc->pullud; struct gpio_chip *chip = &pct->chip; unsigned offset; int ret; enum pin_config_param param = pinconf_to_config_param(config); enum pin_config_param argument = pinconf_to_config_argument(config); dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n", pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input", (param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") : (argument ? "pull up" : "pull down")); /* on ABx500, there is no GPIO0, so adjust the offset */ offset = pin - 1; switch (param) { case PIN_CONFIG_BIAS_PULL_DOWN: /* * if argument = 1 set the pull down * else clear the pull down */ ret = abx500_gpio_direction_input(chip, offset); /* * Some chips only support pull down, while some actually * support both pull up and pull down. Such chips have * a "pullud" range specified for the pins that support * both features. If the pin is not within that range, we * fall back to the old bit set that only support pull down. */ if (pullud && pin >= pullud->first_pin && pin <= pullud->last_pin) ret = abx500_config_pull_updown(pct, pin, argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE); else /* Chip only supports pull down */ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, argument ? 0 : 1); break; case PIN_CONFIG_OUTPUT: ret = abx500_gpio_direction_output(chip, offset, argument); break; default: dev_err(chip->dev, "illegal configuration requested\n"); return -EINVAL; } return ret; } static struct pinconf_ops abx500_pinconf_ops = { .pin_config_get = abx500_pin_config_get, .pin_config_set = abx500_pin_config_set, }; static struct pinctrl_desc abx500_pinctrl_desc = { .name = "pinctrl-abx500", .pctlops = &abx500_pinctrl_ops, .pmxops = &abx500_pinmux_ops, .confops = &abx500_pinconf_ops, .owner = THIS_MODULE, }; static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc) { unsigned int lowest = 0; unsigned int highest = 0; unsigned int npins = 0; int i; /* * Compute number of GPIOs from the last SoC gpio range descriptors * These ranges may include "holes" but the GPIO number space shall * still be homogeneous, so we need to detect and account for any * such holes so that these are included in the number of GPIO pins. */ for (i = 0; i < soc->gpio_num_ranges; i++) { unsigned gstart; unsigned gend; const struct abx500_pinrange *p; p = &soc->gpio_ranges[i]; gstart = p->offset; gend = p->offset + p->npins - 1; if (i == 0) { /* First iteration, set start values */ lowest = gstart; highest = gend; } else { if (gstart < lowest) lowest = gstart; if (gend > highest) highest = gend; } } /* this gives the absolute number of pins */ npins = highest - lowest + 1; return npins; } static const struct of_device_id abx500_gpio_match[] = { { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, }, { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, }, { .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, }, { .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, }, }; static int abx500_gpio_probe(struct platform_device *pdev) { struct ab8500_platform_data *abx500_pdata = dev_get_platdata(pdev->dev.parent); struct abx500_gpio_platform_data *pdata = NULL; struct device_node *np = pdev->dev.of_node; struct abx500_pinctrl *pct; const struct platform_device_id *platid = platform_get_device_id(pdev); unsigned int id = -1; int ret, err; int i; if (abx500_pdata) pdata = abx500_pdata->gpio; if (!pdata) { if (np) { const struct of_device_id *match; match = of_match_device(abx500_gpio_match, &pdev->dev); if (!match) return -ENODEV; id = (unsigned long)match->data; } else { dev_err(&pdev->dev, "gpio dt and platform data missing\n"); return -ENODEV; } } if (platid) id = platid->driver_data; pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl), GFP_KERNEL); if (pct == NULL) { dev_err(&pdev->dev, "failed to allocate memory for pct\n"); return -ENOMEM; } pct->dev = &pdev->dev; pct->parent = dev_get_drvdata(pdev->dev.parent); pct->chip = abx500gpio_chip; pct->chip.dev = &pdev->dev; pct->chip.base = pdata->gpio_base; pct->chip.base = (np) ? -1 : pdata->gpio_base; /* initialize the lock */ mutex_init(&pct->lock); /* Poke in other ASIC variants here */ switch (id) { case PINCTRL_AB8500: abx500_pinctrl_ab8500_init(&pct->soc); break; case PINCTRL_AB8540: abx500_pinctrl_ab8540_init(&pct->soc); break; case PINCTRL_AB9540: abx500_pinctrl_ab9540_init(&pct->soc); break; case PINCTRL_AB8505: abx500_pinctrl_ab8505_init(&pct->soc); break; default: dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", (int) platid->driver_data); mutex_destroy(&pct->lock); return -EINVAL; } if (!pct->soc) { dev_err(&pdev->dev, "Invalid SOC data\n"); mutex_destroy(&pct->lock); return -EINVAL; } pct->chip.ngpio = abx500_get_gpio_num(pct->soc); pct->irq_cluster = pct->soc->gpio_irq_cluster; pct->irq_cluster_size = pct->soc->ngpio_irq_cluster; ret = gpiochip_add(&pct->chip); if (ret) { dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); mutex_destroy(&pct->lock); return ret; } dev_info(&pdev->dev, "added gpiochip\n"); abx500_pinctrl_desc.pins = pct->soc->pins; abx500_pinctrl_desc.npins = pct->soc->npins; pct->pctldev = pinctrl_register(&abx500_pinctrl_desc, &pdev->dev, pct); if (!pct->pctldev) { dev_err(&pdev->dev, "could not register abx500 pinctrl driver\n"); ret = -EINVAL; goto out_rem_chip; } dev_info(&pdev->dev, "registered pin controller\n"); /* We will handle a range of GPIO pins */ for (i = 0; i < pct->soc->gpio_num_ranges; i++) { const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i]; ret = gpiochip_add_pin_range(&pct->chip, dev_name(&pdev->dev), p->offset - 1, p->offset, p->npins); if (ret < 0) goto out_rem_chip; } platform_set_drvdata(pdev, pct); dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n"); return 0; out_rem_chip: err = gpiochip_remove(&pct->chip); if (err) dev_info(&pdev->dev, "failed to remove gpiochip\n"); mutex_destroy(&pct->lock); return ret; } /** * abx500_gpio_remove() - remove Ab8500-gpio driver * @pdev: Platform device registered */ static int abx500_gpio_remove(struct platform_device *pdev) { struct abx500_pinctrl *pct = platform_get_drvdata(pdev); int ret; ret = gpiochip_remove(&pct->chip); if (ret < 0) { dev_err(pct->dev, "unable to remove gpiochip: %d\n", ret); return ret; } mutex_destroy(&pct->lock); return 0; } static const struct platform_device_id abx500_pinctrl_id[] = { { "pinctrl-ab8500", PINCTRL_AB8500 }, { "pinctrl-ab8540", PINCTRL_AB8540 }, { "pinctrl-ab9540", PINCTRL_AB9540 }, { "pinctrl-ab8505", PINCTRL_AB8505 }, { }, }; static struct platform_driver abx500_gpio_driver = { .driver = { .name = "abx500-gpio", .owner = THIS_MODULE, .of_match_table = abx500_gpio_match, }, .probe = abx500_gpio_probe, .remove = abx500_gpio_remove, .id_table = abx500_pinctrl_id, }; static int __init abx500_gpio_init(void) { return platform_driver_register(&abx500_gpio_driver); } core_initcall(abx500_gpio_init); MODULE_AUTHOR("Patrice Chotard "); MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO"); MODULE_ALIAS("platform:abx500-gpio"); MODULE_LICENSE("GPL v2");