/* * NAND Flash Controller Device Driver * Copyright © 2009-2010, Intel Corporation and its suppliers. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * */ #include #include #include #include #include #include #include #include #include "denali.h" MODULE_LICENSE("GPL"); /* We define a module parameter that allows the user to override * the hardware and decide what timing mode should be used. */ #define NAND_DEFAULT_TIMINGS -1 static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; module_param(onfi_timing_mode, int, S_IRUGO); MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting." " -1 indicates use default timings"); #define DENALI_NAND_NAME "denali-nand" /* We define a macro here that combines all interrupts this driver uses into * a single constant value, for convenience. */ #define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \ INTR_STATUS__ECC_TRANSACTION_DONE | \ INTR_STATUS__ECC_ERR | \ INTR_STATUS__PROGRAM_FAIL | \ INTR_STATUS__LOAD_COMP | \ INTR_STATUS__PROGRAM_COMP | \ INTR_STATUS__TIME_OUT | \ INTR_STATUS__ERASE_FAIL | \ INTR_STATUS__RST_COMP | \ INTR_STATUS__ERASE_COMP) /* indicates whether or not the internal value for the flash bank is * valid or not */ #define CHIP_SELECT_INVALID -1 #define SUPPORT_8BITECC 1 /* This macro divides two integers and rounds fractional values up * to the nearest integer value. */ #define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y))) /* this macro allows us to convert from an MTD structure to our own * device context (denali) structure. */ #define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd) /* These constants are defined by the driver to enable common driver * configuration options. */ #define SPARE_ACCESS 0x41 #define MAIN_ACCESS 0x42 #define MAIN_SPARE_ACCESS 0x43 #define DENALI_READ 0 #define DENALI_WRITE 0x100 /* types of device accesses. We can issue commands and get status */ #define COMMAND_CYCLE 0 #define ADDR_CYCLE 1 #define STATUS_CYCLE 2 /* this is a helper macro that allows us to * format the bank into the proper bits for the controller */ #define BANK(x) ((x) << 24) /* forward declarations */ static void clear_interrupts(struct denali_nand_info *denali); static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask); static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask); static uint32_t read_interrupt_status(struct denali_nand_info *denali); /* Certain operations for the denali NAND controller use * an indexed mode to read/write data. The operation is * performed by writing the address value of the command * to the device memory followed by the data. This function * abstracts this common operation. */ static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data) { iowrite32(address, denali->flash_mem); iowrite32(data, denali->flash_mem + 0x10); } /* Perform an indexed read of the device */ static void index_addr_read_data(struct denali_nand_info *denali, uint32_t address, uint32_t *pdata) { iowrite32(address, denali->flash_mem); *pdata = ioread32(denali->flash_mem + 0x10); } /* We need to buffer some data for some of the NAND core routines. * The operations manage buffering that data. */ static void reset_buf(struct denali_nand_info *denali) { denali->buf.head = denali->buf.tail = 0; } static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) { BUG_ON(denali->buf.tail >= sizeof(denali->buf.buf)); denali->buf.buf[denali->buf.tail++] = byte; } /* reads the status of the device */ static void read_status(struct denali_nand_info *denali) { uint32_t cmd = 0x0; /* initialize the data buffer to store status */ reset_buf(denali); cmd = ioread32(denali->flash_reg + WRITE_PROTECT); if (cmd) write_byte_to_buf(denali, NAND_STATUS_WP); else write_byte_to_buf(denali, 0); } /* resets a specific device connected to the core */ static void reset_bank(struct denali_nand_info *denali) { uint32_t irq_status = 0; uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT; clear_interrupts(denali); iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET); irq_status = wait_for_irq(denali, irq_mask); if (irq_status & INTR_STATUS__TIME_OUT) dev_err(denali->dev, "reset bank failed.\n"); } /* Reset the flash controller */ static uint16_t denali_nand_reset(struct denali_nand_info *denali) { uint32_t i; dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); for (i = 0 ; i < denali->max_banks; i++) iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, denali->flash_reg + INTR_STATUS(i)); for (i = 0 ; i < denali->max_banks; i++) { iowrite32(1 << i, denali->flash_reg + DEVICE_RESET); while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) & (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT))) cpu_relax(); if (ioread32(denali->flash_reg + INTR_STATUS(i)) & INTR_STATUS__TIME_OUT) dev_dbg(denali->dev, "NAND Reset operation timed out on bank %d\n", i); } for (i = 0; i < denali->max_banks; i++) iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, denali->flash_reg + INTR_STATUS(i)); return PASS; } /* this routine calculates the ONFI timing values for a given mode and * programs the clocking register accordingly. The mode is determined by * the get_onfi_nand_para routine. */ static void nand_onfi_timing_set(struct denali_nand_info *denali, uint16_t mode) { uint16_t Trea[6] = {40, 30, 25, 20, 20, 16}; uint16_t Trp[6] = {50, 25, 17, 15, 12, 10}; uint16_t Treh[6] = {30, 15, 15, 10, 10, 7}; uint16_t Trc[6] = {100, 50, 35, 30, 25, 20}; uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15}; uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5}; uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25}; uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70}; uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100}; uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100}; uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60}; uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15}; uint16_t TclsRising = 1; uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid; uint16_t dv_window = 0; uint16_t en_lo, en_hi; uint16_t acc_clks; uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); en_lo = CEIL_DIV(Trp[mode], CLK_X); en_hi = CEIL_DIV(Treh[mode], CLK_X); #if ONFI_BLOOM_TIME if ((en_hi * CLK_X) < (Treh[mode] + 2)) en_hi++; #endif if ((en_lo + en_hi) * CLK_X < Trc[mode]) en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X); if ((en_lo + en_hi) < CLK_MULTI) en_lo += CLK_MULTI - en_lo - en_hi; while (dv_window < 8) { data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode]; data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode]; data_invalid = data_invalid_rhoh < data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh; dv_window = data_invalid - Trea[mode]; if (dv_window < 8) en_lo++; } acc_clks = CEIL_DIV(Trea[mode], CLK_X); while (((acc_clks * CLK_X) - Trea[mode]) < 3) acc_clks++; if ((data_invalid - acc_clks * CLK_X) < 2) dev_warn(denali->dev, "%s, Line %d: Warning!\n", __FILE__, __LINE__); addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); re_2_we = CEIL_DIV(Trhw[mode], CLK_X); re_2_re = CEIL_DIV(Trhz[mode], CLK_X); we_2_re = CEIL_DIV(Twhr[mode], CLK_X); cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X); if (!TclsRising) cs_cnt = CEIL_DIV(Tcs[mode], CLK_X); if (cs_cnt == 0) cs_cnt = 1; if (Tcea[mode]) { while (((cs_cnt * CLK_X) + Trea[mode]) < Tcea[mode]) cs_cnt++; } #if MODE5_WORKAROUND if (mode == 5) acc_clks = 5; #endif /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */ if ((ioread32(denali->flash_reg + MANUFACTURER_ID) == 0) && (ioread32(denali->flash_reg + DEVICE_ID) == 0x88)) acc_clks = 6; iowrite32(acc_clks, denali->flash_reg + ACC_CLKS); iowrite32(re_2_we, denali->flash_reg + RE_2_WE); iowrite32(re_2_re, denali->flash_reg + RE_2_RE); iowrite32(we_2_re, denali->flash_reg + WE_2_RE); iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA); iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT); } /* queries the NAND device to see what ONFI modes it supports. */ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali) { int i; /* we needn't to do a reset here because driver has already * reset all the banks before * */ if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) & ONFI_TIMING_MODE__VALUE)) return FAIL; for (i = 5; i > 0; i--) { if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & (0x01 << i)) break; } nand_onfi_timing_set(denali, i); /* By now, all the ONFI devices we know support the page cache */ /* rw feature. So here we enable the pipeline_rw_ahead feature */ /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */ /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */ return PASS; } static void get_samsung_nand_para(struct denali_nand_info *denali, uint8_t device_id) { if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ /* Set timing register values according to datasheet */ iowrite32(5, denali->flash_reg + ACC_CLKS); iowrite32(20, denali->flash_reg + RE_2_WE); iowrite32(12, denali->flash_reg + WE_2_RE); iowrite32(14, denali->flash_reg + ADDR_2_DATA); iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT); iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT); iowrite32(2, denali->flash_reg + CS_SETUP_CNT); } } static void get_toshiba_nand_para(struct denali_nand_info *denali) { uint32_t tmp; /* Workaround to fix a controller bug which reports a wrong */ /* spare area size for some kind of Toshiba NAND device */ if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) && (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) { iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) * ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE); iowrite32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); #if SUPPORT_15BITECC iowrite32(15, denali->flash_reg + ECC_CORRECTION); #elif SUPPORT_8BITECC iowrite32(8, denali->flash_reg + ECC_CORRECTION); #endif } } static void get_hynix_nand_para(struct denali_nand_info *denali, uint8_t device_id) { uint32_t main_size, spare_size; switch (device_id) { case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */ case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */ iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK); iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED); spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED); iowrite32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE); iowrite32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); iowrite32(0, denali->flash_reg + DEVICE_WIDTH); #if SUPPORT_15BITECC iowrite32(15, denali->flash_reg + ECC_CORRECTION); #elif SUPPORT_8BITECC iowrite32(8, denali->flash_reg + ECC_CORRECTION); #endif break; default: dev_warn(denali->dev, "Spectra: Unknown Hynix NAND (Device ID: 0x%x)." "Will use default parameter values instead.\n", device_id); } } /* determines how many NAND chips are connected to the controller. Note for * Intel CE4100 devices we don't support more than one device. */ static void find_valid_banks(struct denali_nand_info *denali) { uint32_t id[denali->max_banks]; int i; denali->total_used_banks = 1; for (i = 0; i < denali->max_banks; i++) { index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90); index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0); index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]); dev_dbg(denali->dev, "Return 1st ID for bank[%d]: %x\n", i, id[i]); if (i == 0) { if (!(id[i] & 0x0ff)) break; /* WTF? */ } else { if ((id[i] & 0x0ff) == (id[0] & 0x0ff)) denali->total_used_banks++; else break; } } if (denali->platform == INTEL_CE4100) { /* Platform limitations of the CE4100 device limit * users to a single chip solution for NAND. * Multichip support is not enabled. */ if (denali->total_used_banks != 1) { dev_err(denali->dev, "Sorry, Intel CE4100 only supports " "a single NAND device.\n"); BUG(); } } dev_dbg(denali->dev, "denali->total_used_banks: %d\n", denali->total_used_banks); } /* * Use the configuration feature register to determine the maximum number of * banks that the hardware supports. */ static void detect_max_banks(struct denali_nand_info *denali) { uint32_t features = ioread32(denali->flash_reg + FEATURES); denali->max_banks = 2 << (features & FEATURES__N_BANKS); } static void detect_partition_feature(struct denali_nand_info *denali) { /* For MRST platform, denali->fwblks represent the * number of blocks firmware is taken, * FW is in protect partition and MTD driver has no * permission to access it. So let driver know how many * blocks it can't touch. * */ if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) { if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) & PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) { denali->fwblks = ((ioread32(denali->flash_reg + MIN_MAX_BANK(1)) & MIN_MAX_BANK__MIN_VALUE) * denali->blksperchip) + (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) & MIN_BLK_ADDR__VALUE); } else denali->fwblks = SPECTRA_START_BLOCK; } else denali->fwblks = SPECTRA_START_BLOCK; } static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) { uint16_t status = PASS; uint32_t id_bytes[5], addr; uint8_t i, maf_id, device_id; dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); /* Use read id method to get device ID and other * params. For some NAND chips, controller can't * report the correct device ID by reading from * DEVICE_ID register * */ addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); index_addr(denali, (uint32_t)addr | 0, 0x90); index_addr(denali, (uint32_t)addr | 1, 0); for (i = 0; i < 5; i++) index_addr_read_data(denali, addr | 2, &id_bytes[i]); maf_id = id_bytes[0]; device_id = id_bytes[1]; if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */ if (FAIL == get_onfi_nand_para(denali)) return FAIL; } else if (maf_id == 0xEC) { /* Samsung NAND */ get_samsung_nand_para(denali, device_id); } else if (maf_id == 0x98) { /* Toshiba NAND */ get_toshiba_nand_para(denali); } else if (maf_id == 0xAD) { /* Hynix NAND */ get_hynix_nand_para(denali, device_id); } dev_info(denali->dev, "Dump timing register values:" "acc_clks: %d, re_2_we: %d, re_2_re: %d\n" "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n" "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", ioread32(denali->flash_reg + ACC_CLKS), ioread32(denali->flash_reg + RE_2_WE), ioread32(denali->flash_reg + RE_2_RE), ioread32(denali->flash_reg + WE_2_RE), ioread32(denali->flash_reg + ADDR_2_DATA), ioread32(denali->flash_reg + RDWR_EN_LO_CNT), ioread32(denali->flash_reg + RDWR_EN_HI_CNT), ioread32(denali->flash_reg + CS_SETUP_CNT)); find_valid_banks(denali); detect_partition_feature(denali); /* If the user specified to override the default timings * with a specific ONFI mode, we apply those changes here. */ if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) nand_onfi_timing_set(denali, onfi_timing_mode); return status; } static void denali_set_intr_modes(struct denali_nand_info *denali, uint16_t INT_ENABLE) { dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); if (INT_ENABLE) iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE); else iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE); } /* validation function to verify that the controlling software is making * a valid request */ static inline bool is_flash_bank_valid(int flash_bank) { return (flash_bank >= 0 && flash_bank < 4); } static void denali_irq_init(struct denali_nand_info *denali) { uint32_t int_mask = 0; int i; /* Disable global interrupts */ denali_set_intr_modes(denali, false); int_mask = DENALI_IRQ_ALL; /* Clear all status bits */ for (i = 0; i < denali->max_banks; ++i) iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i)); denali_irq_enable(denali, int_mask); } static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali) { denali_set_intr_modes(denali, false); free_irq(irqnum, denali); } static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask) { int i; for (i = 0; i < denali->max_banks; ++i) iowrite32(int_mask, denali->flash_reg + INTR_EN(i)); } /* This function only returns when an interrupt that this driver cares about * occurs. This is to reduce the overhead of servicing interrupts */ static inline uint32_t denali_irq_detected(struct denali_nand_info *denali) { return read_interrupt_status(denali) & DENALI_IRQ_ALL; } /* Interrupts are cleared by writing a 1 to the appropriate status bit */ static inline void clear_interrupt(struct denali_nand_info *denali, uint32_t irq_mask) { uint32_t intr_status_reg = 0; intr_status_reg = INTR_STATUS(denali->flash_bank); iowrite32(irq_mask, denali->flash_reg + intr_status_reg); } static void clear_interrupts(struct denali_nand_info *denali) { uint32_t status = 0x0; spin_lock_irq(&denali->irq_lock); status = read_interrupt_status(denali); clear_interrupt(denali, status); denali->irq_status = 0x0; spin_unlock_irq(&denali->irq_lock); } static uint32_t read_interrupt_status(struct denali_nand_info *denali) { uint32_t intr_status_reg = 0; intr_status_reg = INTR_STATUS(denali->flash_bank); return ioread32(denali->flash_reg + intr_status_reg); } /* This is the interrupt service routine. It handles all interrupts * sent to this device. Note that on CE4100, this is a shared * interrupt. */ static irqreturn_t denali_isr(int irq, void *dev_id) { struct denali_nand_info *denali = dev_id; uint32_t irq_status = 0x0; irqreturn_t result = IRQ_NONE; spin_lock(&denali->irq_lock); /* check to see if a valid NAND chip has * been selected. */ if (is_flash_bank_valid(denali->flash_bank)) { /* check to see if controller generated * the interrupt, since this is a shared interrupt */ irq_status = denali_irq_detected(denali); if (irq_status != 0) { /* handle interrupt */ /* first acknowledge it */ clear_interrupt(denali, irq_status); /* store the status in the device context for someone to read */ denali->irq_status |= irq_status; /* notify anyone who cares that it happened */ complete(&denali->complete); /* tell the OS that we've handled this */ result = IRQ_HANDLED; } } spin_unlock(&denali->irq_lock); return result; } #define BANK(x) ((x) << 24) static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) { unsigned long comp_res = 0; uint32_t intr_status = 0; bool retry = false; unsigned long timeout = msecs_to_jiffies(1000); do { comp_res = wait_for_completion_timeout(&denali->complete, timeout); spin_lock_irq(&denali->irq_lock); intr_status = denali->irq_status; if (intr_status & irq_mask) { denali->irq_status &= ~irq_mask; spin_unlock_irq(&denali->irq_lock); /* our interrupt was detected */ break; } else { /* these are not the interrupts you are looking for - * need to wait again */ spin_unlock_irq(&denali->irq_lock); retry = true; } } while (comp_res != 0); if (comp_res == 0) { /* timeout */ pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n", intr_status, irq_mask); intr_status = 0; } return intr_status; } /* This helper function setups the registers for ECC and whether or not * the spare area will be transferred. */ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare) { int ecc_en_flag = 0, transfer_spare_flag = 0; /* set ECC, transfer spare bits if needed */ ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; /* Enable spare area/ECC per user's request. */ iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); } /* sends a pipeline command operation to the controller. See the Denali NAND * controller's user guide for more information (section 4.2.3.6). */ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare, int access_type, int op) { int status = PASS; uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0, irq_mask = 0; if (op == DENALI_READ) irq_mask = INTR_STATUS__LOAD_COMP; else if (op == DENALI_WRITE) irq_mask = 0; else BUG(); setup_ecc_for_xfer(denali, ecc_en, transfer_spare); /* clear interrupts */ clear_interrupts(denali); addr = BANK(denali->flash_bank) | denali->page; if (op == DENALI_WRITE && access_type != SPARE_ACCESS) { cmd = MODE_01 | addr; iowrite32(cmd, denali->flash_mem); } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) { /* read spare area */ cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, access_type); cmd = MODE_01 | addr; iowrite32(cmd, denali->flash_mem); } else if (op == DENALI_READ) { /* setup page read request for access type */ cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, access_type); /* page 33 of the NAND controller spec indicates we should not use the pipeline commands in Spare area only mode. So we don't. */ if (access_type == SPARE_ACCESS) { cmd = MODE_01 | addr; iowrite32(cmd, denali->flash_mem); } else { index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count); /* wait for command to be accepted * can always use status0 bit as the * mask is identical for each * bank. */ irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { dev_err(denali->dev, "cmd, page, addr on timeout " "(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr); status = FAIL; } else { cmd = MODE_01 | addr; iowrite32(cmd, denali->flash_mem); } } } return status; } /* helper function that simply writes a buffer to the flash */ static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf, int len) { uint32_t i = 0, *buf32; /* verify that the len is a multiple of 4. see comment in * read_data_from_flash_mem() */ BUG_ON((len % 4) != 0); /* write the data to the flash memory */ buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) iowrite32(*buf32++, denali->flash_mem + 0x10); return i*4; /* intent is to return the number of bytes read */ } /* helper function that simply reads a buffer from the flash */ static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf, int len) { uint32_t i = 0, *buf32; /* we assume that len will be a multiple of 4, if not * it would be nice to know about it ASAP rather than * have random failures... * This assumption is based on the fact that this * function is designed to be used to read flash pages, * which are typically multiples of 4... */ BUG_ON((len % 4) != 0); /* transfer the data from the flash */ buf32 = (uint32_t *)buf; for (i = 0; i < len / 4; i++) *buf32++ = ioread32(denali->flash_mem + 0x10); return i*4; /* intent is to return the number of bytes read */ } /* writes OOB data to the device */ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); uint32_t irq_status = 0; uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP | INTR_STATUS__PROGRAM_FAIL; int status = 0; denali->page = page; if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, DENALI_WRITE) == PASS) { write_data_to_flash_mem(denali, buf, mtd->oobsize); /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { dev_err(denali->dev, "OOB write failed\n"); status = -EIO; } } else { dev_err(denali->dev, "unable to send pipeline command\n"); status = -EIO; } return status; } /* reads OOB data from the device */ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); uint32_t irq_mask = INTR_STATUS__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0; denali->page = page; if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, DENALI_READ) == PASS) { read_data_from_flash_mem(denali, buf, mtd->oobsize); /* wait for command to be accepted * can always use status0 bit as the mask is identical for each * bank. */ irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) dev_err(denali->dev, "page on OOB timeout %d\n", denali->page); /* We set the device back to MAIN_ACCESS here as I observed * instability with the controller if you do a block erase * and the last transaction was a SPARE_ACCESS. Block erase * is reliable (according to the MTD test infrastructure) * if you are in MAIN_ACCESS. */ addr = BANK(denali->flash_bank) | denali->page; cmd = MODE_10 | addr; index_addr(denali, (uint32_t)cmd, MAIN_ACCESS); } } /* this function examines buffers to see if they contain data that * indicate that the buffer is part of an erased region of flash. */ bool is_erased(uint8_t *buf, int len) { int i = 0; for (i = 0; i < len; i++) if (buf[i] != 0xFF) return false; return true; } #define ECC_SECTOR_SIZE 512 #define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12) #define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET)) #define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK) #define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO__ERROR_TYPE)) #define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8) #define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO) static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, uint32_t irq_status, unsigned int *max_bitflips) { bool check_erased_page = false; unsigned int bitflips = 0; if (irq_status & INTR_STATUS__ECC_ERR) { /* read the ECC errors. we'll ignore them for now */ uint32_t err_address = 0, err_correction_info = 0; uint32_t err_byte = 0, err_sector = 0, err_device = 0; uint32_t err_correction_value = 0; denali_set_intr_modes(denali, false); do { err_address = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS); err_sector = ECC_SECTOR(err_address); err_byte = ECC_BYTE(err_address); err_correction_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO); err_correction_value = ECC_CORRECTION_VALUE(err_correction_info); err_device = ECC_ERR_DEVICE(err_correction_info); if (ECC_ERROR_CORRECTABLE(err_correction_info)) { /* If err_byte is larger than ECC_SECTOR_SIZE, * means error happened in OOB, so we ignore * it. It's no need for us to correct it * err_device is represented the NAND error * bits are happened in if there are more * than one NAND connected. * */ if (err_byte < ECC_SECTOR_SIZE) { int offset; offset = (err_sector * ECC_SECTOR_SIZE + err_byte) * denali->devnum + err_device; /* correct the ECC error */ buf[offset] ^= err_correction_value; denali->mtd.ecc_stats.corrected++; bitflips++; } } else { /* if the error is not correctable, need to * look at the page to see if it is an erased * page. if so, then it's not a real ECC error * */ check_erased_page = true; } } while (!ECC_LAST_ERR(err_correction_info)); /* Once handle all ecc errors, controller will triger * a ECC_TRANSACTION_DONE interrupt, so here just wait * for a while for this interrupt * */ while (!(read_interrupt_status(denali) & INTR_STATUS__ECC_TRANSACTION_DONE)) cpu_relax(); clear_interrupts(denali); denali_set_intr_modes(denali, true); } *max_bitflips = bitflips; return check_erased_page; } /* programs the controller to either enable/disable DMA transfers */ static void denali_enable_dma(struct denali_nand_info *denali, bool en) { uint32_t reg_val = 0x0; if (en) reg_val = DMA_ENABLE__FLAG; iowrite32(reg_val, denali->flash_reg + DMA_ENABLE); ioread32(denali->flash_reg + DMA_ENABLE); } /* setups the HW to perform the data DMA */ static void denali_setup_dma(struct denali_nand_info *denali, int op) { uint32_t mode = 0x0; const int page_count = 1; dma_addr_t addr = denali->buf.dma_buf; mode = MODE_10 | BANK(denali->flash_bank); /* DMA is a four step process */ /* 1. setup transfer type and # of pages */ index_addr(denali, mode | denali->page, 0x2000 | op | page_count); /* 2. set memory high address bits 23:8 */ index_addr(denali, mode | ((uint16_t)(addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ index_addr(denali, mode | ((uint16_t)addr << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes*/ index_addr(denali, mode | 0x14000, 0x2400); } /* writes a page. user specifies type, and this function handles the * configuration details. */ static int write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, bool raw_xfer) { struct denali_nand_info *denali = mtd_to_denali(mtd); dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP | INTR_STATUS__PROGRAM_FAIL; /* if it is a raw xfer, we want to disable ecc, and send * the spare area. * !raw_xfer - enable ecc * raw_xfer - transfer spare */ setup_ecc_for_xfer(denali, !raw_xfer, raw_xfer); /* copy buffer into DMA buffer */ memcpy(denali->buf.buf, buf, mtd->writesize); if (raw_xfer) { /* transfer the data to the spare area */ memcpy(denali->buf.buf + mtd->writesize, chip->oob_poi, mtd->oobsize); } dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE); clear_interrupts(denali); denali_enable_dma(denali, true); denali_setup_dma(denali, DENALI_WRITE); /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { dev_err(denali->dev, "timeout on write_page (type = %d)\n", raw_xfer); denali->status = (irq_status & INTR_STATUS__PROGRAM_FAIL) ? NAND_STATUS_FAIL : PASS; } denali_enable_dma(denali, false); dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE); return 0; } /* NAND core entry points */ /* this is the callback that the NAND core calls to write a page. Since * writing a page with ECC or without is similar, all the work is done * by write_page above. * */ static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { /* for regular page writes, we let HW handle all the ECC * data written to the device. */ return write_page(mtd, chip, buf, false); } /* This is the callback that the NAND core calls to write a page without ECC. * raw access is similar to ECC page writes, so all the work is done in the * write_page() function above. */ static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { /* for raw page writes, we want to disable ECC and simply write whatever data is in the buffer. */ return write_page(mtd, chip, buf, true); } static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { return write_oob_data(mtd, chip->oob_poi, page); } static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { read_oob_data(mtd, chip->oob_poi, page); return 0; } static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { unsigned int max_bitflips; struct denali_nand_info *denali = mtd_to_denali(mtd); dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE | INTR_STATUS__ECC_ERR; bool check_erased_page = false; if (page != denali->page) { dev_err(denali->dev, "IN %s: page %d is not" " equal to denali->page %d, investigate!!", __func__, page, denali->page); BUG(); } setup_ecc_for_xfer(denali, true, false); denali_enable_dma(denali, true); dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); clear_interrupts(denali); denali_setup_dma(denali, DENALI_READ); /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); memcpy(buf, denali->buf.buf, mtd->writesize); check_erased_page = handle_ecc(denali, buf, irq_status, &max_bitflips); denali_enable_dma(denali, false); if (check_erased_page) { read_oob_data(&denali->mtd, chip->oob_poi, denali->page); /* check ECC failures that may have occurred on erased pages */ if (check_erased_page) { if (!is_erased(buf, denali->mtd.writesize)) denali->mtd.ecc_stats.failed++; if (!is_erased(buf, denali->mtd.oobsize)) denali->mtd.ecc_stats.failed++; } } return max_bitflips; } static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP; if (page != denali->page) { dev_err(denali->dev, "IN %s: page %d is not" " equal to denali->page %d, investigate!!", __func__, page, denali->page); BUG(); } setup_ecc_for_xfer(denali, false, true); denali_enable_dma(denali, true); dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); clear_interrupts(denali); denali_setup_dma(denali, DENALI_READ); /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); denali_enable_dma(denali, false); memcpy(buf, denali->buf.buf, mtd->writesize); memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, mtd->oobsize); return 0; } static uint8_t denali_read_byte(struct mtd_info *mtd) { struct denali_nand_info *denali = mtd_to_denali(mtd); uint8_t result = 0xff; if (denali->buf.head < denali->buf.tail) result = denali->buf.buf[denali->buf.head++]; return result; } static void denali_select_chip(struct mtd_info *mtd, int chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); spin_lock_irq(&denali->irq_lock); denali->flash_bank = chip; spin_unlock_irq(&denali->irq_lock); } static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); int status = denali->status; denali->status = 0; return status; } static void denali_erase(struct mtd_info *mtd, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); uint32_t cmd = 0x0, irq_status = 0; /* clear interrupts */ clear_interrupts(denali); /* setup page read request for access type */ cmd = MODE_10 | BANK(denali->flash_bank) | page; index_addr(denali, (uint32_t)cmd, 0x1); /* wait for erase to complete or failure to occur */ irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP | INTR_STATUS__ERASE_FAIL); denali->status = (irq_status & INTR_STATUS__ERASE_FAIL) ? NAND_STATUS_FAIL : PASS; } static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); uint32_t addr, id; int i; switch (cmd) { case NAND_CMD_PAGEPROG: break; case NAND_CMD_STATUS: read_status(denali); break; case NAND_CMD_READID: case NAND_CMD_PARAM: reset_buf(denali); /*sometimes ManufactureId read from register is not right * e.g. some of Micron MT29F32G08QAA MLC NAND chips * So here we send READID cmd to NAND insteand * */ addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); index_addr(denali, (uint32_t)addr | 0, 0x90); index_addr(denali, (uint32_t)addr | 1, 0); for (i = 0; i < 5; i++) { index_addr_read_data(denali, (uint32_t)addr | 2, &id); write_byte_to_buf(denali, id); } break; case NAND_CMD_READ0: case NAND_CMD_SEQIN: denali->page = page; break; case NAND_CMD_RESET: reset_bank(denali); break; case NAND_CMD_READOOB: /* TODO: Read OOB data */ break; default: pr_err(": unsupported command received 0x%x\n", cmd); break; } } /* stubs for ECC functions not used by the NAND core */ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, uint8_t *ecc_code) { struct denali_nand_info *denali = mtd_to_denali(mtd); dev_err(denali->dev, "denali_ecc_calculate called unexpectedly\n"); BUG(); return -EIO; } static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, uint8_t *read_ecc, uint8_t *calc_ecc) { struct denali_nand_info *denali = mtd_to_denali(mtd); dev_err(denali->dev, "denali_ecc_correct called unexpectedly\n"); BUG(); return -EIO; } static void denali_ecc_hwctl(struct mtd_info *mtd, int mode) { struct denali_nand_info *denali = mtd_to_denali(mtd); dev_err(denali->dev, "denali_ecc_hwctl called unexpectedly\n"); BUG(); } /* end NAND core entry points */ /* Initialization code to bring the device up to a known good state */ static void denali_hw_init(struct denali_nand_info *denali) { /* tell driver how many bit controller will skip before * writing ECC code in OOB, this register may be already * set by firmware. So we read this value out. * if this value is 0, just let it be. * */ denali->bbtskipbytes = ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES); detect_max_banks(denali); denali_nand_reset(denali); iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED); iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE); iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER); /* Should set value for these registers when init */ iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); iowrite32(1, denali->flash_reg + ECC_ENABLE); denali_nand_timing_set(denali); denali_irq_init(denali); } /* Althogh controller spec said SLC ECC is forceb to be 4bit, * but denali controller in MRST only support 15bit and 8bit ECC * correction * */ #define ECC_8BITS 14 static struct nand_ecclayout nand_8bit_oob = { .eccbytes = 14, }; #define ECC_15BITS 26 static struct nand_ecclayout nand_15bit_oob = { .eccbytes = 26, }; static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; static struct nand_bbt_descr bbt_main_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, .offs = 8, .len = 4, .veroffs = 12, .maxblocks = 4, .pattern = bbt_pattern, }; static struct nand_bbt_descr bbt_mirror_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, .offs = 8, .len = 4, .veroffs = 12, .maxblocks = 4, .pattern = mirror_pattern, }; /* initialize driver data structures */ void denali_drv_init(struct denali_nand_info *denali) { denali->idx = 0; /* setup interrupt handler */ /* the completion object will be used to notify * the callee that the interrupt is done */ init_completion(&denali->complete); /* the spinlock will be used to synchronize the ISR * with any element that might be access shared * data (interrupt status) */ spin_lock_init(&denali->irq_lock); /* indicate that MTD has not selected a valid bank yet */ denali->flash_bank = CHIP_SELECT_INVALID; /* initialize our irq_status variable to indicate no interrupts */ denali->irq_status = 0; } int denali_init(struct denali_nand_info *denali) { int ret; if (denali->platform == INTEL_CE4100) { /* Due to a silicon limitation, we can only support * ONFI timing mode 1 and below. */ if (onfi_timing_mode < -1 || onfi_timing_mode > 1) { pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n"); return -EINVAL; } } /* Is 32-bit DMA supported? */ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32)); if (ret) { pr_err("Spectra: no usable DMA configuration\n"); return ret; } denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf, DENALI_BUF_SIZE, DMA_BIDIRECTIONAL); if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) { dev_err(denali->dev, "Spectra: failed to map DMA buffer\n"); return -EIO; } denali->mtd.dev.parent = denali->dev; denali_hw_init(denali); denali_drv_init(denali); /* denali_isr register is done after all the hardware * initilization is finished*/ if (request_irq(denali->irq, denali_isr, IRQF_SHARED, DENALI_NAND_NAME, denali)) { pr_err("Spectra: Unable to allocate IRQ\n"); return -ENODEV; } /* now that our ISR is registered, we can enable interrupts */ denali_set_intr_modes(denali, true); denali->mtd.name = "denali-nand"; denali->mtd.owner = THIS_MODULE; denali->mtd.priv = &denali->nand; /* register the driver with the NAND core subsystem */ denali->nand.select_chip = denali_select_chip; denali->nand.cmdfunc = denali_cmdfunc; denali->nand.read_byte = denali_read_byte; denali->nand.waitfunc = denali_waitfunc; /* scan for NAND devices attached to the controller * this is the first stage in a two step process to register * with the nand subsystem */ if (nand_scan_ident(&denali->mtd, denali->max_banks, NULL)) { ret = -ENXIO; goto failed_req_irq; } /* MTD supported page sizes vary by kernel. We validate our * kernel supports the device here. */ if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) { ret = -ENODEV; pr_err("Spectra: device size not supported by this version of MTD."); goto failed_req_irq; } /* support for multi nand * MTD known nothing about multi nand, * so we should tell it the real pagesize * and anything necessery */ denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED); denali->nand.chipsize <<= (denali->devnum - 1); denali->nand.page_shift += (denali->devnum - 1); denali->nand.pagemask = (denali->nand.chipsize >> denali->nand.page_shift) - 1; denali->nand.bbt_erase_shift += (denali->devnum - 1); denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift; denali->nand.chip_shift += (denali->devnum - 1); denali->mtd.writesize <<= (denali->devnum - 1); denali->mtd.oobsize <<= (denali->devnum - 1); denali->mtd.erasesize <<= (denali->devnum - 1); denali->mtd.size = denali->nand.numchips * denali->nand.chipsize; denali->bbtskipbytes *= denali->devnum; /* second stage of the NAND scan * this stage requires information regarding ECC and * bad block management. */ /* Bad block management */ denali->nand.bbt_td = &bbt_main_descr; denali->nand.bbt_md = &bbt_mirror_descr; /* skip the scan for now until we have OOB read and write support */ denali->nand.bbt_options |= NAND_BBT_USE_FLASH; denali->nand.options |= NAND_SKIP_BBTSCAN; denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; /* Denali Controller only support 15bit and 8bit ECC in MRST, * so just let controller do 15bit ECC for MLC and 8bit ECC for * SLC if possible. * */ if (denali->nand.cellinfo & 0xc && (denali->mtd.oobsize > (denali->bbtskipbytes + ECC_15BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE)))) { /* if MLC OOB size is large enough, use 15bit ECC*/ denali->nand.ecc.strength = 15; denali->nand.ecc.layout = &nand_15bit_oob; denali->nand.ecc.bytes = ECC_15BITS; iowrite32(15, denali->flash_reg + ECC_CORRECTION); } else if (denali->mtd.oobsize < (denali->bbtskipbytes + ECC_8BITS * (denali->mtd.writesize / ECC_SECTOR_SIZE))) { pr_err("Your NAND chip OOB is not large enough to \ contain 8bit ECC correction codes"); goto failed_req_irq; } else { denali->nand.ecc.strength = 8; denali->nand.ecc.layout = &nand_8bit_oob; denali->nand.ecc.bytes = ECC_8BITS; iowrite32(8, denali->flash_reg + ECC_CORRECTION); } denali->nand.ecc.bytes *= denali->devnum; denali->nand.ecc.strength *= denali->devnum; denali->nand.ecc.layout->eccbytes *= denali->mtd.writesize / ECC_SECTOR_SIZE; denali->nand.ecc.layout->oobfree[0].offset = denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes; denali->nand.ecc.layout->oobfree[0].length = denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes - denali->bbtskipbytes; /* Let driver know the total blocks number and * how many blocks contained by each nand chip. * blksperchip will help driver to know how many * blocks is taken by FW. * */ denali->totalblks = denali->mtd.size >> denali->nand.phys_erase_shift; denali->blksperchip = denali->totalblks / denali->nand.numchips; /* These functions are required by the NAND core framework, otherwise, * the NAND core will assert. However, we don't need them, so we'll stub * them out. */ denali->nand.ecc.calculate = denali_ecc_calculate; denali->nand.ecc.correct = denali_ecc_correct; denali->nand.ecc.hwctl = denali_ecc_hwctl; /* override the default read operations */ denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum; denali->nand.ecc.read_page = denali_read_page; denali->nand.ecc.read_page_raw = denali_read_page_raw; denali->nand.ecc.write_page = denali_write_page; denali->nand.ecc.write_page_raw = denali_write_page_raw; denali->nand.ecc.read_oob = denali_read_oob; denali->nand.ecc.write_oob = denali_write_oob; denali->nand.erase_cmd = denali_erase; if (nand_scan_tail(&denali->mtd)) { ret = -ENXIO; goto failed_req_irq; } ret = mtd_device_register(&denali->mtd, NULL, 0); if (ret) { dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n", ret); goto failed_req_irq; } return 0; failed_req_irq: denali_irq_cleanup(denali->irq, denali); return ret; } EXPORT_SYMBOL(denali_init); /* driver exit point */ void denali_remove(struct denali_nand_info *denali) { denali_irq_cleanup(denali->irq, denali); dma_unmap_single(denali->dev, denali->buf.dma_buf, DENALI_BUF_SIZE, DMA_BIDIRECTIONAL); } EXPORT_SYMBOL(denali_remove);