/* Miro PCM20 radio driver for Linux radio support * (c) 1998 Ruurd Reitsma * Thanks to Norberto Pellici for the ACI device interface specification * The API part is based on the radiotrack driver by M. Kirkwood * This driver relies on the aci mixer provided by the snd-miro * ALSA driver. * Look there for further info... */ /* What ever you think about the ACI, version 0x07 is not very well! * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono * conditions... Robert */ #include #include #include #include #include #include #include #include #include static int radio_nr = -1; module_param(radio_nr, int, 0); MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); struct pcm20 { struct v4l2_device v4l2_dev; struct video_device vdev; struct v4l2_ctrl_handler ctrl_handler; unsigned long freq; u32 audmode; struct snd_miro_aci *aci; struct mutex lock; }; static struct pcm20 pcm20_card = { .freq = 87 * 16000, .audmode = V4L2_TUNER_MODE_STEREO, }; static int pcm20_setfreq(struct pcm20 *dev, unsigned long freq) { unsigned char freql; unsigned char freqh; struct snd_miro_aci *aci = dev->aci; freq /= 160; if (!(aci->aci_version == 0x07 || aci->aci_version >= 0xb0)) freq /= 10; /* I don't know exactly which version * needs this hack */ freql = freq & 0xff; freqh = freq >> 8; return snd_aci_cmd(aci, ACI_WRITE_TUNE, freql, freqh); } static const struct v4l2_file_operations pcm20_fops = { .owner = THIS_MODULE, .open = v4l2_fh_open, .poll = v4l2_ctrl_poll, .release = v4l2_fh_release, .unlocked_ioctl = video_ioctl2, }; static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *v) { struct pcm20 *dev = video_drvdata(file); strlcpy(v->driver, "Miro PCM20", sizeof(v->driver)); strlcpy(v->card, "Miro PCM20", sizeof(v->card)); snprintf(v->bus_info, sizeof(v->bus_info), "ISA:%s", dev->v4l2_dev.name); v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO; v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct pcm20 *dev = video_drvdata(file); int res; if (v->index) return -EINVAL; strlcpy(v->name, "FM", sizeof(v->name)); v->type = V4L2_TUNER_RADIO; v->rangelow = 87*16000; v->rangehigh = 108*16000; res = snd_aci_cmd(dev->aci, ACI_READ_TUNERSTATION, -1, -1); v->signal = (res & 0x80) ? 0 : 0xffff; /* Note: stereo detection does not work if the audio is muted, it will default to mono in that case. */ res = snd_aci_cmd(dev->aci, ACI_READ_TUNERSTEREO, -1, -1); v->rxsubchans = (res & 0x40) ? V4L2_TUNER_SUB_MONO : V4L2_TUNER_SUB_STEREO; v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; v->audmode = dev->audmode; return 0; } static int vidioc_s_tuner(struct file *file, void *priv, const struct v4l2_tuner *v) { struct pcm20 *dev = video_drvdata(file); if (v->index) return -EINVAL; if (v->audmode > V4L2_TUNER_MODE_STEREO) dev->audmode = V4L2_TUNER_MODE_STEREO; else dev->audmode = v->audmode; snd_aci_cmd(dev->aci, ACI_SET_TUNERMONO, dev->audmode == V4L2_TUNER_MODE_MONO, -1); return 0; } static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct pcm20 *dev = video_drvdata(file); if (f->tuner != 0) return -EINVAL; f->type = V4L2_TUNER_RADIO; f->frequency = dev->freq; return 0; } static int vidioc_s_frequency(struct file *file, void *priv, const struct v4l2_frequency *f) { struct pcm20 *dev = video_drvdata(file); if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) return -EINVAL; dev->freq = clamp_t(u32, f->frequency, 87 * 16000U, 108 * 16000U); pcm20_setfreq(dev, dev->freq); return 0; } static int pcm20_s_ctrl(struct v4l2_ctrl *ctrl) { struct pcm20 *dev = container_of(ctrl->handler, struct pcm20, ctrl_handler); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: snd_aci_cmd(dev->aci, ACI_SET_TUNERMUTE, ctrl->val, -1); return 0; } return -EINVAL; } static const struct v4l2_ioctl_ops pcm20_ioctl_ops = { .vidioc_querycap = vidioc_querycap, .vidioc_g_tuner = vidioc_g_tuner, .vidioc_s_tuner = vidioc_s_tuner, .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, .vidioc_log_status = v4l2_ctrl_log_status, .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; static const struct v4l2_ctrl_ops pcm20_ctrl_ops = { .s_ctrl = pcm20_s_ctrl, }; static int __init pcm20_init(void) { struct pcm20 *dev = &pcm20_card; struct v4l2_device *v4l2_dev = &dev->v4l2_dev; struct v4l2_ctrl_handler *hdl; int res; dev->aci = snd_aci_get_aci(); if (dev->aci == NULL) { v4l2_err(v4l2_dev, "you must load the snd-miro driver first!\n"); return -ENODEV; } strlcpy(v4l2_dev->name, "radio-miropcm20", sizeof(v4l2_dev->name)); mutex_init(&dev->lock); res = v4l2_device_register(NULL, v4l2_dev); if (res < 0) { v4l2_err(v4l2_dev, "could not register v4l2_device\n"); return -EINVAL; } hdl = &dev->ctrl_handler; v4l2_ctrl_handler_init(hdl, 1); v4l2_ctrl_new_std(hdl, &pcm20_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); v4l2_dev->ctrl_handler = hdl; if (hdl->error) { res = hdl->error; v4l2_err(v4l2_dev, "Could not register control\n"); goto err_hdl; } strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); dev->vdev.v4l2_dev = v4l2_dev; dev->vdev.fops = &pcm20_fops; dev->vdev.ioctl_ops = &pcm20_ioctl_ops; dev->vdev.release = video_device_release_empty; dev->vdev.lock = &dev->lock; set_bit(V4L2_FL_USE_FH_PRIO, &dev->vdev.flags); video_set_drvdata(&dev->vdev, dev); snd_aci_cmd(dev->aci, ACI_SET_TUNERMONO, dev->audmode == V4L2_TUNER_MODE_MONO, -1); pcm20_setfreq(dev, dev->freq); if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) goto err_hdl; v4l2_info(v4l2_dev, "Mirosound PCM20 Radio tuner\n"); return 0; err_hdl: v4l2_ctrl_handler_free(hdl); v4l2_device_unregister(v4l2_dev); return -EINVAL; } MODULE_AUTHOR("Ruurd Reitsma, Krzysztof Helt"); MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card."); MODULE_LICENSE("GPL"); static void __exit pcm20_cleanup(void) { struct pcm20 *dev = &pcm20_card; video_unregister_device(&dev->vdev); snd_aci_cmd(dev->aci, ACI_SET_TUNERMUTE, 1, -1); v4l2_ctrl_handler_free(&dev->ctrl_handler); v4l2_device_unregister(&dev->v4l2_dev); } module_init(pcm20_init); module_exit(pcm20_cleanup);