/* * Support for OR51211 (pcHDTV HD-2000) - VSB * * Copyright (C) 2005 Kirk Lapray * * Based on code from Jack Kelliher (kelliher@xmission.com) * Copyright (C) 2002 & pcHDTV, inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ /* * This driver needs external firmware. Please use the command * "/Documentation/dvb/get_dvb_firmware or51211" to * download/extract it, and then copy it to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ #define OR51211_DEFAULT_FIRMWARE "dvb-fe-or51211.fw" #include #include #include #include #include #include #include #include "dvb_math.h" #include "dvb_frontend.h" #include "or51211.h" static int debug; #define dprintk(args...) \ do { if (debug) pr_debug(args); } while (0) static u8 run_buf[] = {0x7f,0x01}; static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC struct or51211_state { struct i2c_adapter* i2c; /* Configuration settings */ const struct or51211_config* config; struct dvb_frontend frontend; struct bt878* bt; /* Demodulator private data */ u8 initialized:1; u32 snr; /* Result of last SNR claculation */ /* Tuner private data */ u32 current_frequency; }; static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf, int len) { int err; struct i2c_msg msg; msg.addr = reg; msg.flags = 0; msg.len = len; msg.buf = (u8 *)buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } return 0; } static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len) { int err; struct i2c_msg msg; msg.addr = reg; msg.flags = I2C_M_RD; msg.len = len; msg.buf = buf; if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { pr_warn("error (addr %02x, err == %i)\n", reg, err); return -EREMOTEIO; } return 0; } static int or51211_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) { struct or51211_state* state = fe->demodulator_priv; u8 tudata[585]; int i; dprintk("Firmware is %zd bytes\n",fw->size); /* Get eprom data */ tudata[0] = 17; if (i2c_writebytes(state,0x50,tudata,1)) { pr_warn("error eprom addr\n"); return -1; } if (i2c_readbytes(state,0x50,&tudata[145],192)) { pr_warn("error eprom\n"); return -1; } /* Create firmware buffer */ for (i = 0; i < 145; i++) tudata[i] = fw->data[i]; for (i = 0; i < 248; i++) tudata[i+337] = fw->data[145+i]; state->config->reset(fe); if (i2c_writebytes(state,state->config->demod_address,tudata,585)) { pr_warn("error 1\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address, &fw->data[393],8125)) { pr_warn("error 2\n"); return -1; } msleep(1); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { pr_warn("error 3\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { pr_warn("error 4\n"); return -1; } msleep(10); pr_info("Done.\n"); return 0; }; static int or51211_setmode(struct dvb_frontend* fe, int mode) { struct or51211_state* state = fe->demodulator_priv; u8 rec_buf[14]; state->config->setmode(fe, mode); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { pr_warn("error 1\n"); return -1; } /* Wait at least 5 msec */ msleep(10); if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) { pr_warn("error 2\n"); return -1; } msleep(10); /* Set operation mode in Receiver 1 register; * type 1: * data 0x50h Automatic sets receiver channel conditions * Automatic NTSC rejection filter * Enable MPEG serial data output * MPEG2tr * High tuner phase noise * normal +/-150kHz Carrier acquisition range */ if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) { pr_warn("error 3\n"); return -1; } rec_buf[0] = 0x04; rec_buf[1] = 0x00; rec_buf[2] = 0x03; rec_buf[3] = 0x00; msleep(20); if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) { pr_warn("error 5\n"); } msleep(3); if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) { pr_warn("error 6\n"); return -1; } dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]); return 0; } static int or51211_set_parameters(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct or51211_state* state = fe->demodulator_priv; /* Change only if we are actually changing the channel */ if (state->current_frequency != p->frequency) { if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); } /* Set to ATSC mode */ or51211_setmode(fe,0); /* Update current frequency */ state->current_frequency = p->frequency; } return 0; } static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status) { struct or51211_state* state = fe->demodulator_priv; unsigned char rec_buf[2]; unsigned char snd_buf[] = {0x04,0x00,0x03,0x00}; *status = 0; /* Receiver Status */ if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { pr_warn("write error\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { pr_warn("read error\n"); return -1; } dprintk("%x %x\n", rec_buf[0], rec_buf[1]); if (rec_buf[0] & 0x01) { /* Receiver Lock */ *status |= FE_HAS_SIGNAL; *status |= FE_HAS_CARRIER; *status |= FE_HAS_VITERBI; *status |= FE_HAS_SYNC; *status |= FE_HAS_LOCK; } return 0; } /* Calculate SNR estimation (scaled by 2^24) 8-VSB SNR equation from Oren datasheets For 8-VSB: SNR[dB] = 10 * log10(219037.9454 / MSE^2 ) We re-write the snr equation as: SNR * 2^24 = 10*(c - 2*intlog10(MSE)) Where for 8-VSB, c = log10(219037.9454) * 2^24 */ static u32 calculate_snr(u32 mse, u32 c) { if (mse == 0) /* No signal */ return 0; mse = 2*intlog10(mse); if (mse > c) { /* Negative SNR, which is possible, but realisticly the demod will lose lock before the signal gets this bad. The API only allows for unsigned values, so just return 0 */ return 0; } return 10*(c - mse); } static int or51211_read_snr(struct dvb_frontend* fe, u16* snr) { struct or51211_state* state = fe->demodulator_priv; u8 rec_buf[2]; u8 snd_buf[3]; /* SNR after Equalizer */ snd_buf[0] = 0x04; snd_buf[1] = 0x00; snd_buf[2] = 0x04; if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) { pr_warn("error writing snr reg\n"); return -1; } if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) { pr_warn("read_status read error\n"); return -1; } state->snr = calculate_snr(rec_buf[0], 89599047); *snr = (state->snr) >> 16; dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0], state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); return 0; } static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength) { /* Calculate Strength from SNR up to 35dB */ /* Even though the SNR can go higher than 35dB, there is some comfort */ /* factor in having a range of strong signals that can show at 100% */ struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv; u16 snr; int ret; ret = fe->ops.read_snr(fe, &snr); if (ret != 0) return ret; /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ /* scale the range 0 - 35*2^24 into 0 - 65535 */ if (state->snr >= 8960 * 0x10000) *strength = 0xffff; else *strength = state->snr / 8960; return 0; } static int or51211_read_ber(struct dvb_frontend* fe, u32* ber) { *ber = -ENOSYS; return 0; } static int or51211_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { *ucblocks = -ENOSYS; return 0; } static int or51211_sleep(struct dvb_frontend* fe) { return 0; } static int or51211_init(struct dvb_frontend* fe) { struct or51211_state* state = fe->demodulator_priv; const struct or51211_config* config = state->config; const struct firmware* fw; unsigned char get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00}; unsigned char rec_buf[14]; int ret,i; if (!state->initialized) { /* Request the firmware, this will block until it uploads */ pr_info("Waiting for firmware upload (%s)...\n", OR51211_DEFAULT_FIRMWARE); ret = config->request_firmware(fe, &fw, OR51211_DEFAULT_FIRMWARE); pr_info("Got Hotplug firmware\n"); if (ret) { pr_warn("No firmware uploaded " "(timeout or file not found?)\n"); return ret; } ret = or51211_load_firmware(fe, fw); release_firmware(fw); if (ret) { pr_warn("Writing firmware to device failed!\n"); return ret; } pr_info("Firmware upload complete.\n"); /* Set operation mode in Receiver 1 register; * type 1: * data 0x50h Automatic sets receiver channel conditions * Automatic NTSC rejection filter * Enable MPEG serial data output * MPEG2tr * High tuner phase noise * normal +/-150kHz Carrier acquisition range */ if (i2c_writebytes(state,state->config->demod_address, cmd_buf,3)) { pr_warn("Load DVR Error 5\n"); return -1; } /* Read back ucode version to besure we loaded correctly */ /* and are really up and running */ rec_buf[0] = 0x04; rec_buf[1] = 0x00; rec_buf[2] = 0x03; rec_buf[3] = 0x00; msleep(30); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { pr_warn("Load DVR Error A\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[10],2)) { pr_warn("Load DVR Error B\n"); return -1; } rec_buf[0] = 0x04; rec_buf[1] = 0x00; rec_buf[2] = 0x01; rec_buf[3] = 0x00; msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { pr_warn("Load DVR Error C\n"); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[12],2)) { pr_warn("Load DVR Error D\n"); return -1; } for (i = 0; i < 8; i++) rec_buf[i]=0xed; for (i = 0; i < 5; i++) { msleep(30); get_ver_buf[4] = i+1; if (i2c_writebytes(state,state->config->demod_address, get_ver_buf,5)) { pr_warn("Load DVR Error 6 - %d\n", i); return -1; } msleep(3); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[i*2],2)) { pr_warn("Load DVR Error 7 - %d\n", i); return -1; } /* If we didn't receive the right index, try again */ if ((int)rec_buf[i*2+1]!=i+1){ i--; } } dprintk("read_fwbits %10ph\n", rec_buf); pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n", rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12], rec_buf[10]); rec_buf[0] = 0x04; rec_buf[1] = 0x00; rec_buf[2] = 0x03; rec_buf[3] = 0x00; msleep(20); if (i2c_writebytes(state,state->config->demod_address, rec_buf,3)) { pr_warn("Load DVR Error 8\n"); return -1; } msleep(20); if (i2c_readbytes(state,state->config->demod_address, &rec_buf[8],2)) { pr_warn("Load DVR Error 9\n"); return -1; } state->initialized = 1; } return 0; } static int or51211_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { fesettings->min_delay_ms = 500; fesettings->step_size = 0; fesettings->max_drift = 0; return 0; } static void or51211_release(struct dvb_frontend* fe) { struct or51211_state* state = fe->demodulator_priv; state->config->sleep(fe); kfree(state); } static struct dvb_frontend_ops or51211_ops; struct dvb_frontend* or51211_attach(const struct or51211_config* config, struct i2c_adapter* i2c) { struct or51211_state* state = NULL; /* Allocate memory for the internal state */ state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL); if (state == NULL) return NULL; /* Setup the state */ state->config = config; state->i2c = i2c; state->initialized = 0; state->current_frequency = 0; /* Create dvb_frontend */ memcpy(&state->frontend.ops, &or51211_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; } static struct dvb_frontend_ops or51211_ops = { .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, .info = { .name = "Oren OR51211 VSB Frontend", .frequency_min = 44000000, .frequency_max = 958000000, .frequency_stepsize = 166666, .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_8VSB }, .release = or51211_release, .init = or51211_init, .sleep = or51211_sleep, .set_frontend = or51211_set_parameters, .get_tune_settings = or51211_get_tune_settings, .read_status = or51211_read_status, .read_ber = or51211_read_ber, .read_signal_strength = or51211_read_signal_strength, .read_snr = or51211_read_snr, .read_ucblocks = or51211_read_ucblocks, }; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); MODULE_DESCRIPTION("Oren OR51211 VSB [pcHDTV HD-2000] Demodulator Driver"); MODULE_AUTHOR("Kirk Lapray"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(or51211_attach);