From 377195c438fc5e9e4ca59e69382c10771d817d6a Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Wed, 16 Nov 2011 00:43:16 +0100 Subject: W1: w1_therm: release the bus during conversion on externally powered devices w1_therm devices can either be bus powered or externally powered. When device is bus powered during temperature conversion the bus have to be left high to provide necessary power. Some masters also allow strong power-up to be enabled in this case. Naturally, no communication over bus can occur during that time. However, if device has external power then there is no such restriction, and host can talk to other devices during temperature conversion. There is command which allows us to check how device is powered, this patch uses it to release the bus on externally w1_therm powered devices during temperature conversion. Also, this changes uninterruptible sleeps there into interruptible ones to avoid long uninterruptible sleep if w1 subsystem happens to grab bus for scan during w1_therm_read(). Signed-off-by: Maciej Szmigiero Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/slaves/w1_therm.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) (limited to 'drivers/w1') diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index a1ef9b5b38c..ff29ae747ee 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -175,11 +175,13 @@ static ssize_t w1_therm_read(struct device *device, { struct w1_slave *sl = dev_to_w1_slave(device); struct w1_master *dev = sl->master; - u8 rom[9], crc, verdict; + u8 rom[9], crc, verdict, external_power; int i, max_trying = 10; ssize_t c = PAGE_SIZE; - mutex_lock(&dev->mutex); + i = mutex_lock_interruptible(&dev->mutex); + if (i != 0) + return i; memset(rom, 0, sizeof(rom)); @@ -190,13 +192,37 @@ static ssize_t w1_therm_read(struct device *device, if (!w1_reset_select_slave(sl)) { int count = 0; unsigned int tm = 750; + unsigned long sleep_rem; + + w1_write_8(dev, W1_READ_PSUPPLY); + external_power = w1_read_8(dev); + + if (w1_reset_select_slave(sl)) + continue; /* 750ms strong pullup (or delay) after the convert */ - if (w1_strong_pullup) + if (!external_power && w1_strong_pullup) w1_next_pullup(dev, tm); + w1_write_8(dev, W1_CONVERT_TEMP); - if (!w1_strong_pullup) - msleep(tm); + + if (external_power) { + mutex_unlock(&dev->mutex); + + sleep_rem = msleep_interruptible(tm); + if (sleep_rem != 0) + return -EINTR; + + i = mutex_lock_interruptible(&dev->mutex); + if (i != 0) + return i; + } else if (!w1_strong_pullup) { + sleep_rem = msleep_interruptible(tm); + if (sleep_rem != 0) { + mutex_unlock(&dev->mutex); + return -EINTR; + } + } if (!w1_reset_select_slave(sl)) { -- cgit v1.2.3