From 2855bb79d75ad1419b1f54008f861a39517acfd5 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Sun, 28 Nov 2010 23:00:00 +0200 Subject: Staging: w35und: Use pr_debug() for debugging Use pr_debug() for debugging printk's and kill the FULL_DEBUG macro. It would be even better to use dev_dbg() but unfortunately looking up struct device in the current code structure makes things very ugly. Please note that I dropped the DataDmp() calls from RFSynthesizer_SwitchingChannel() because that function doesn't exist. Cc: Pavel Machek Signed-off-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/mds.c | 16 ++++------------ drivers/staging/winbond/reg.c | 27 +++++---------------------- drivers/staging/winbond/sysdef.h | 12 ------------ drivers/staging/winbond/wb35reg.c | 20 +++++--------------- drivers/staging/winbond/wb35rx.c | 21 +++++---------------- drivers/staging/winbond/wb35tx.c | 16 ++++------------ drivers/staging/winbond/wbusb.c | 13 +++---------- 7 files changed, 26 insertions(+), 99 deletions(-) (limited to 'drivers/staging/winbond') diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c index 90f2cc019d3..8ae3d84e34b 100644 --- a/drivers/staging/winbond/mds.c +++ b/drivers/staging/winbond/mds.c @@ -346,9 +346,7 @@ static void Mds_HeaderCopy(struct wbsoft_priv *adapter, struct wb35_descriptor * ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG; pDes->TxRate = ctmp1; - #ifdef _PE_TX_DUMP_ - printk("Tx rate =%x\n", ctmp1); - #endif + pr_debug("Tx rate =%x\n", ctmp1); pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1; @@ -426,9 +424,7 @@ Mds_Tx(struct wbsoft_priv *adapter) do { FillIndex = pMds->TxFillIndex; if (pMds->TxOwner[FillIndex]) { /* Is owned by software 0:Yes 1:No */ -#ifdef _PE_TX_DUMP_ - printk("[Mds_Tx] Tx Owner is H/W.\n"); -#endif + pr_debug("[Mds_Tx] Tx Owner is H/W.\n"); break; } @@ -472,9 +468,7 @@ Mds_Tx(struct wbsoft_priv *adapter) /* For speed up Key setting */ if (pTxDes->EapFix) { -#ifdef _PE_TX_DUMP_ - printk("35: EPA 4th frame detected. Size = %d\n", PacketSize); -#endif + pr_debug("35: EPA 4th frame detected. Size = %d\n", PacketSize); pHwData->IsKeyPreSet = 1; } @@ -563,9 +557,7 @@ Mds_SendComplete(struct wbsoft_priv *adapter, struct T02_descriptor *pT02) pHwData->tx_retry_count[RetryCount] += RetryCount; else pHwData->tx_retry_count[7] += RetryCount; - #ifdef _PE_STATE_DUMP_ - printk("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count); - #endif + pr_debug("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count); MTO_SetTxCount(adapter, TxRate, RetryCount); } pHwData->dto_tx_frag_count += (RetryCount+1); diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c index 439d213fe95..dcd7560ce2c 100644 --- a/drivers/staging/winbond/reg.c +++ b/drivers/staging/winbond/reg.c @@ -1012,9 +1012,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData) case RF_AIROHA_7230: /* Start to fill RF parameters, PLL_ON should be pulled low. */ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000); - #ifdef _PE_STATE_DUMP_ - printk("* PLL_ON low\n"); - #endif + pr_debug("* PLL_ON low\n"); number = ARRAY_SIZE(al7230_rf_data_24); Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number); break; @@ -1100,9 +1098,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData) case RF_AIROHA_7230: /* RF parameters have filled completely, PLL_ON should be pulled high */ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080); - #ifdef _PE_STATE_DUMP_ - printk("* PLL_ON high\n"); - #endif + pr_debug("* PLL_ON high\n"); /* 2.4GHz */ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F; @@ -1117,9 +1113,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData) /* 5GHz */ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000); - #ifdef _PE_STATE_DUMP_ - printk("* PLL_ON low\n"); - #endif + pr_debug("* PLL_ON low\n"); number = ARRAY_SIZE(al7230_rf_data_50); Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number); @@ -1129,9 +1123,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData) msleep(5); Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080); - #ifdef _PE_STATE_DUMP_ - printk("* PLL_ON high\n"); - #endif + pr_debug("* PLL_ON high\n"); ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F; Wb35Reg_WriteSync(pHwData, 0x0864, ltmp); @@ -1797,9 +1789,7 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info C /* Write to register. number must less and equal than 16 */ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, number, NO_INCREMENT); - #ifdef _PE_STATE_DUMP_ - printk("Band changed\n"); - #endif + pr_debug("Band changed\n"); } if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */ @@ -2338,13 +2328,6 @@ void EEPROMTxVgaAdjust(struct hw_data *pHwData) pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp * 2 / 4; pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp * 3 / 4; } - - #ifdef _PE_STATE_DUMP_ - printk(" TxVgaFor24 :\n"); - DataDmp((u8 *)pHwData->TxVgaFor24, 14 , 0); - printk(" TxVgaFor50 :\n"); - DataDmp((u8 *)pHwData->TxVgaFor50, 70 , 0); - #endif } void BBProcessor_RateChanging(struct hw_data *pHwData, u8 rate) diff --git a/drivers/staging/winbond/sysdef.h b/drivers/staging/winbond/sysdef.h index 8d4ebe15d93..04e6e8ff734 100644 --- a/drivers/staging/winbond/sysdef.h +++ b/drivers/staging/winbond/sysdef.h @@ -3,16 +3,4 @@ #ifndef SYS_DEF_H #define SYS_DEF_H -/* debug print options, mark what debug you don't need */ - -#ifdef FULL_DEBUG -#define _PE_STATE_DUMP_ -#define _PE_TX_DUMP_ -#define _PE_RX_DUMP_ -#define _PE_OID_DUMP_ -#define _PE_DTO_DUMP_ -#define _PE_REG_DUMP_ -#define _PE_USB_INI_DUMP_ -#endif - #endif diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c index 770722385ee..f33f4f80b46 100644 --- a/drivers/staging/winbond/wb35reg.c +++ b/drivers/staging/winbond/wb35reg.c @@ -150,9 +150,7 @@ unsigned char Wb35Reg_WriteSync(struct hw_data *pHwData, u16 RegisterNo, u32 Reg Wb35Reg_EP0VM_start(pHwData); if (ret < 0) { -#ifdef _PE_REG_DUMP_ - printk("EP0 Write register usb message sending error\n"); -#endif + pr_debug("EP0 Write register usb message sending error\n"); pHwData->SurpriseRemove = 1; return false; } @@ -320,9 +318,7 @@ unsigned char Wb35Reg_ReadSync(struct hw_data *pHwData, u16 RegisterNo, u32 *pRe Wb35Reg_EP0VM_start(pHwData); if (ret < 0) { -#ifdef _PE_REG_DUMP_ - printk("EP0 Read register usb message sending error\n"); -#endif + pr_debug("EP0 Read register usb message sending error\n"); pHwData->SurpriseRemove = 1; return false; } @@ -442,9 +438,7 @@ void Wb35Reg_EP0VM(struct hw_data *pHwData) ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret < 0) { -#ifdef _PE_REG_DUMP_ - printk("EP0 Irp sending error\n"); -#endif + pr_debug("EP0 Irp sending error\n"); goto cleanup; } return; @@ -479,9 +473,7 @@ void Wb35Reg_EP0VM_complete(struct urb *urb) spin_unlock_irq(®->EP0VM_spin_lock); if (reg->EP0VM_status) { -#ifdef _PE_REG_DUMP_ - printk("EP0 IoCompleteRoutine return error\n"); -#endif + pr_debug("EP0 IoCompleteRoutine return error\n"); reg->EP0vm_state = VM_STOP; pHwData->SurpriseRemove = 1; } else { @@ -526,9 +518,7 @@ void Wb35Reg_destroy(struct hw_data *pHwData) usb_free_urb(urb); kfree(reg_queue); } else { -#ifdef _PE_REG_DUMP_ - printk("EP0 queue release error\n"); -#endif + pr_debug("EP0 queue release error\n"); } spin_lock_irq(®->EP0VM_spin_lock); diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c index 5af271f2de9..02557289ffb 100644 --- a/drivers/staging/winbond/wb35rx.c +++ b/drivers/staging/winbond/wb35rx.c @@ -109,10 +109,7 @@ static u16 Wb35Rx_indicate(struct ieee80211_hw *hw) /* Basic check for Rx length. Is length valid? */ if (PacketSize > MAX_PACKET_SIZE) { -#ifdef _PE_RX_DUMP_ - printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize); -#endif - + pr_debug("Serious ERROR : Rx data size too long, size =%d\n", PacketSize); pWb35Rx->EP3vm_state = VM_STOP; pWb35Rx->Ep3ErrorCount2++; break; @@ -186,9 +183,7 @@ static void Wb35Rx_Complete(struct urb *urb) /* The URB is completed, check the result */ if (pWb35Rx->EP3VM_status != 0) { -#ifdef _PE_USB_STATE_DUMP_ - printk("EP3 IoCompleteRoutine return error\n"); -#endif + pr_debug("EP3 IoCompleteRoutine return error\n"); pWb35Rx->EP3vm_state = VM_STOP; goto error; } @@ -249,9 +244,7 @@ static void Wb35Rx(struct ieee80211_hw *hw) RxBufferId = pWb35Rx->RxBufferId; if (!pWb35Rx->RxOwner[RxBufferId]) { /* It's impossible to run here. */ -#ifdef _PE_RX_DUMP_ - printk("Rx driver fifo unavailable\n"); -#endif + pr_debug("Rx driver fifo unavailable\n"); goto error; } @@ -337,9 +330,7 @@ void Wb35Rx_stop(struct hw_data *pHwData) /* Canceling the Irp if already sends it out. */ if (pWb35Rx->EP3vm_state == VM_RUNNING) { usb_unlink_urb(pWb35Rx->RxUrb); /* Only use unlink, let Wb35Rx_destroy to free them */ -#ifdef _PE_RX_DUMP_ - printk("EP3 Rx stop\n"); -#endif + pr_debug("EP3 Rx stop\n"); } } @@ -355,8 +346,6 @@ void Wb35Rx_destroy(struct hw_data *pHwData) if (pWb35Rx->RxUrb) usb_free_urb(pWb35Rx->RxUrb); -#ifdef _PE_RX_DUMP_ - printk("Wb35Rx_destroy OK\n"); -#endif + pr_debug("Wb35Rx_destroy OK\n"); } diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c index fd52554e46f..8f0d5273d90 100644 --- a/drivers/staging/winbond/wb35tx.c +++ b/drivers/staging/winbond/wb35tx.c @@ -153,16 +153,12 @@ void Wb35Tx_stop(struct hw_data * pHwData) // Trying to canceling the Trp of EP2 if (pWb35Tx->EP2vm_state == VM_RUNNING) usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destrot to free them - #ifdef _PE_TX_DUMP_ - printk("EP2 Tx stop\n"); - #endif + pr_debug("EP2 Tx stop\n"); // Trying to canceling the Irp of EP4 if (pWb35Tx->EP4vm_state == VM_RUNNING) usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destrot to free them - #ifdef _PE_TX_DUMP_ - printk("EP4 Tx stop\n"); - #endif + pr_debug("EP4 Tx stop\n"); } //====================================================== @@ -182,9 +178,7 @@ void Wb35Tx_destroy(struct hw_data * pHwData) if (pWb35Tx->Tx2Urb) usb_free_urb( pWb35Tx->Tx2Urb ); - #ifdef _PE_TX_DUMP_ - printk("Wb35Tx_destroy OK\n"); - #endif + pr_debug("Wb35Tx_destroy OK\n"); } void Wb35Tx_CurrentTime(struct wbsoft_priv *adapter, u32 TimeCount) @@ -279,9 +273,7 @@ static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter) retv = usb_submit_urb(pUrb, GFP_ATOMIC); if (retv < 0) { - #ifdef _PE_TX_DUMP_ - printk("EP2 Tx Irp sending error\n"); - #endif + pr_debug("EP2 Tx Irp sending error\n"); goto error; } diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index dcb6d5b63d7..5f54b0fd706 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -184,10 +184,7 @@ static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */ pHwData->Channel = channel.ChanNo; pHwData->band = channel.band; -#ifdef _PE_STATE_DUMP_ - printk("Set channel is %d, band =%d\n", pHwData->Channel, - pHwData->band); -#endif + pr_debug("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band); reg->M28_MacControl &= ~0xff; /* Clean channel information field */ reg->M28_MacControl |= channel.ChanNo; Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl, @@ -728,9 +725,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw) } priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData); -#ifdef _PE_STATE_DUMP_ - printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo); -#endif + pr_debug("Driver init, antenna no = %d\n", priv->sLocalPara.bAntennaNo); hal_get_hw_radio_off(pHwData); /* Waiting for HAL setting OK */ @@ -856,9 +851,7 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter) { /* Turn off Rx and Tx hardware ability */ hal_stop(&adapter->sHwData); -#ifdef _PE_USB_INI_DUMP_ - printk("[w35und] Hal_stop O.K.\n"); -#endif + pr_debug("[w35und] Hal_stop O.K.\n"); /* Waiting Irp completed */ msleep(100); -- cgit v1.2.3