From 644570b830266ff33ff5f3542b9c838f93a55ea6 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Sat, 2 Apr 2011 06:20:12 -0700 Subject: 8390: Move the 8390 related drivers Moves the drivers for the National Semi-conductor 8390 chipset into drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile changes. CC: Donald Becker CC: Paul Gortmaker CC: Alain Malek CC: Peter De Schrijver CC: "David Huggins-Daines" CC: Wim Dumon CC: Yoshinori Sato CC: David Hinds CC: Russell King Signed-off-by: Jeff Kirsher --- drivers/net/ne2.c | 799 ------------------------------------------------------ 1 file changed, 799 deletions(-) delete mode 100644 drivers/net/ne2.c (limited to 'drivers/net/ne2.c') diff --git a/drivers/net/ne2.c b/drivers/net/ne2.c deleted file mode 100644 index 70cdc699634..00000000000 --- a/drivers/net/ne2.c +++ /dev/null @@ -1,799 +0,0 @@ -/* ne2.c: A NE/2 Ethernet Driver for Linux. */ -/* - Based on the NE2000 driver written by Donald Becker (1992-94). - modified by Wim Dumon (Apr 1996) - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as wimpie@linux.cc.kuleuven.ac.be - - Currently supported: NE/2 - This patch was never tested on other MCA-ethernet adapters, but it - might work. Just give it a try and let me know if you have problems. - Also mail me if it really works, please! - - Changelog: - Mon Feb 3 16:26:02 MET 1997 - - adapted the driver to work with the 2.1.25 kernel - - multiple ne2 support (untested) - - module support (untested) - - Fri Aug 28 00:18:36 CET 1998 (David Weinehall) - - fixed a few minor typos - - made the MODULE_PARM conditional (it only works with the v2.1.x kernels) - - fixed the module support (Now it's working...) - - Mon Sep 7 19:01:44 CET 1998 (David Weinehall) - - added support for Arco Electronics AE/2-card (experimental) - - Mon Sep 14 09:53:42 CET 1998 (David Weinehall) - - added support for Compex ENET-16MC/P (experimental) - - Tue Sep 15 16:21:12 CET 1998 (David Weinehall, Magnus Jonsson, Tomas Ogren) - - Miscellaneous bugfixes - - Tue Sep 19 16:21:12 CET 1998 (Magnus Jonsson) - - Cleanup - - Wed Sep 23 14:33:34 CET 1998 (David Weinehall) - - Restructuring and rewriting for v2.1.x compliance - - Wed Oct 14 17:19:21 CET 1998 (David Weinehall) - - Added code that unregisters irq and proc-info - - Version# bump - - Mon Nov 16 15:28:23 CET 1998 (Wim Dumon) - - pass 'dev' as last parameter of request_irq in stead of 'NULL' - - Wed Feb 7 21:24:00 CET 2001 (Alfred Arnold) - - added support for the D-Link DE-320CT - - * WARNING - ------- - This is alpha-test software. It is not guaranteed to work. As a - matter of fact, I'm quite sure there are *LOTS* of bugs in here. I - would like to hear from you if you use this driver, even if it works. - If it doesn't work, be sure to send me a mail with the problems ! -*/ - -static const char *version = "ne2.c:v0.91 Nov 16 1998 Wim Dumon \n"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "8390.h" - -#define DRV_NAME "ne2" - -/* Some defines that people can play with if so inclined. */ - -/* Do we perform extra sanity checks on stuff ? */ -/* #define NE_SANITY_CHECK */ - -/* Do we implement the read before write bugfix ? */ -/* #define NE_RW_BUGFIX */ - -/* Do we have a non std. amount of memory? (in units of 256 byte pages) */ -/* #define PACKETBUF_MEMSIZE 0x40 */ - - -/* ---- No user-serviceable parts below ---- */ - -#define NE_BASE (dev->base_addr) -#define NE_CMD 0x00 -#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset. */ -#define NE_RESET 0x20 /* Issue a read to reset, a write to clear. */ -#define NE_IO_EXTENT 0x30 - -#define NE1SM_START_PG 0x20 /* First page of TX buffer */ -#define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */ -#define NESM_START_PG 0x40 /* First page of TX buffer */ -#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ - -/* From the .ADF file: */ -static unsigned int addresses[7] __initdata = - {0x1000, 0x2020, 0x8020, 0xa0a0, 0xb0b0, 0xc0c0, 0xc3d0}; -static int irqs[4] __initdata = {3, 4, 5, 9}; - -/* From the D-Link ADF file: */ -static unsigned int dlink_addresses[4] __initdata = - {0x300, 0x320, 0x340, 0x360}; -static int dlink_irqs[8] __initdata = {3, 4, 5, 9, 10, 11, 14, 15}; - -struct ne2_adapters_t { - unsigned int id; - char *name; -}; - -static struct ne2_adapters_t ne2_adapters[] __initdata = { - { 0x6354, "Arco Ethernet Adapter AE/2" }, - { 0x70DE, "Compex ENET-16 MC/P" }, - { 0x7154, "Novell Ethernet Adapter NE/2" }, - { 0x56ea, "D-Link DE-320CT" }, - { 0x0000, NULL } -}; - -extern int netcard_probe(struct net_device *dev); - -static int ne2_probe1(struct net_device *dev, int slot); - -static void ne_reset_8390(struct net_device *dev); -static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void ne_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void ne_block_output(struct net_device *dev, const int count, - const unsigned char *buf, const int start_page); - - -/* - * special code to read the DE-320's MAC address EEPROM. In contrast to a - * standard NE design, this is a serial EEPROM (93C46) that has to be read - * bit by bit. The EEPROM cotrol port at base + 0x1e has the following - * layout: - * - * Bit 0 = Data out (read from EEPROM) - * Bit 1 = Data in (write to EEPROM) - * Bit 2 = Clock - * Bit 3 = Chip Select - * Bit 7 = ~50 kHz clock for defined delays - * - */ - -static void __init dlink_put_eeprom(unsigned char value, unsigned int addr) -{ - int z; - unsigned char v1, v2; - - /* write the value to the NIC EEPROM register */ - - outb(value, addr + 0x1e); - - /* now wait the clock line to toggle twice. Effectively, we are - waiting (at least) for one clock cycle */ - - for (z = 0; z < 2; z++) { - do { - v1 = inb(addr + 0x1e); - v2 = inb(addr + 0x1e); - } - while (!((v1 ^ v2) & 0x80)); - } -} - -static void __init dlink_send_eeprom_bit(unsigned int bit, unsigned int addr) -{ - /* shift data bit into correct position */ - - bit = bit << 1; - - /* write value, keep clock line high for two cycles */ - - dlink_put_eeprom(0x09 | bit, addr); - dlink_put_eeprom(0x0d | bit, addr); - dlink_put_eeprom(0x0d | bit, addr); - dlink_put_eeprom(0x09 | bit, addr); -} - -static void __init dlink_send_eeprom_word(unsigned int value, unsigned int len, unsigned int addr) -{ - int z; - - /* adjust bits so that they are left-aligned in a 16-bit-word */ - - value = value << (16 - len); - - /* shift bits out to the EEPROM */ - - for (z = 0; z < len; z++) { - dlink_send_eeprom_bit((value & 0x8000) >> 15, addr); - value = value << 1; - } -} - -static unsigned int __init dlink_get_eeprom(unsigned int eeaddr, unsigned int addr) -{ - int z; - unsigned int value = 0; - - /* pull the CS line low for a moment. This resets the EEPROM- - internal logic, and makes it ready for a new command. */ - - dlink_put_eeprom(0x01, addr); - dlink_put_eeprom(0x09, addr); - - /* send one start bit, read command (1 - 0), plus the address to - the EEPROM */ - - dlink_send_eeprom_word(0x0180 | (eeaddr & 0x3f), 9, addr); - - /* get the data word. We clock by sending 0s to the EEPROM, which - get ignored during the read process */ - - for (z = 0; z < 16; z++) { - dlink_send_eeprom_bit(0, addr); - value = (value << 1) | (inb(addr + 0x1e) & 0x01); - } - - return value; -} - -/* - * Note that at boot, this probe only picks up one card at a time. - */ - -static int __init do_ne2_probe(struct net_device *dev) -{ - static int current_mca_slot = -1; - int i; - int adapter_found = 0; - - /* Do not check any supplied i/o locations. - POS registers usually don't fail :) */ - - /* MCA cards have POS registers. - Autodetecting MCA cards is extremely simple. - Just search for the card. */ - - for(i = 0; (ne2_adapters[i].name != NULL) && !adapter_found; i++) { - current_mca_slot = - mca_find_unused_adapter(ne2_adapters[i].id, 0); - - if((current_mca_slot != MCA_NOTFOUND) && !adapter_found) { - int res; - mca_set_adapter_name(current_mca_slot, - ne2_adapters[i].name); - mca_mark_as_used(current_mca_slot); - - res = ne2_probe1(dev, current_mca_slot); - if (res) - mca_mark_as_unused(current_mca_slot); - return res; - } - } - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init ne2_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_ne2_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static int ne2_procinfo(char *buf, int slot, struct net_device *dev) -{ - int len=0; - - len += sprintf(buf+len, "The NE/2 Ethernet Adapter\n" ); - len += sprintf(buf+len, "Driver written by Wim Dumon "); - len += sprintf(buf+len, "\n"); - len += sprintf(buf+len, "Modified by "); - len += sprintf(buf+len, "David Weinehall \n"); - len += sprintf(buf+len, "and by Magnus Jonsson \n"); - len += sprintf(buf+len, "Based on the original NE2000 drivers\n" ); - len += sprintf(buf+len, "Base IO: %#x\n", (unsigned int)dev->base_addr); - len += sprintf(buf+len, "IRQ : %d\n", dev->irq); - len += sprintf(buf+len, "HW addr : %pM\n", dev->dev_addr); - - return len; -} - -static int __init ne2_probe1(struct net_device *dev, int slot) -{ - int i, base_addr, irq, retval; - unsigned char POS; - unsigned char SA_prom[32]; - const char *name = "NE/2"; - int start_page, stop_page; - static unsigned version_printed; - - if (ei_debug && version_printed++ == 0) - printk(version); - - printk("NE/2 ethercard found in slot %d:", slot); - - /* Read base IO and IRQ from the POS-registers */ - POS = mca_read_stored_pos(slot, 2); - if(!(POS % 2)) { - printk(" disabled.\n"); - return -ENODEV; - } - - /* handle different POS register structure for D-Link card */ - - if (mca_read_stored_pos(slot, 0) == 0xea) { - base_addr = dlink_addresses[(POS >> 5) & 0x03]; - irq = dlink_irqs[(POS >> 2) & 0x07]; - } - else { - i = (POS & 0xE)>>1; - /* printk("Halleluja sdog, als er na de pijl een 1 staat is 1 - 1 == 0" - " en zou het moeten werken -> %d\n", i); - The above line was for remote testing, thanx to sdog ... */ - base_addr = addresses[i - 1]; - irq = irqs[(POS & 0x60)>>5]; - } - - if (!request_region(base_addr, NE_IO_EXTENT, DRV_NAME)) - return -EBUSY; - -#ifdef DEBUG - printk("POS info : pos 2 = %#x ; base = %#x ; irq = %ld\n", POS, - base_addr, irq); -#endif - -#ifndef CRYNWR_WAY - /* Reset the card the way they do it in the Crynwr packet driver */ - for (i=0; i<8; i++) - outb(0x0, base_addr + NE_RESET); - inb(base_addr + NE_RESET); - outb(0x21, base_addr + NE_CMD); - if (inb(base_addr + NE_CMD) != 0x21) { - printk("NE/2 adapter not responding\n"); - retval = -ENODEV; - goto out; - } - - /* In the crynwr sources they do a RAM-test here. I skip it. I suppose - my RAM is okay. Suppose your memory is broken. Then this test - should fail and you won't be able to use your card. But if I do not - test, you won't be able to use your card, neither. So this test - won't help you. */ - -#else /* _I_ never tested it this way .. Go ahead and try ...*/ - /* Reset card. Who knows what dain-bramaged state it was left in. */ - { - unsigned long reset_start_time = jiffies; - - /* DON'T change these to inb_p/outb_p or reset will fail on - clones.. */ - outb(inb(base_addr + NE_RESET), base_addr + NE_RESET); - - while ((inb_p(base_addr + EN0_ISR) & ENISR_RESET) == 0) - if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk(" not found (no reset ack).\n"); - retval = -ENODEV; - goto out; - } - - outb_p(0xff, base_addr + EN0_ISR); /* Ack all intr. */ - } -#endif - - - /* Read the 16 bytes of station address PROM. - We must first initialize registers, similar to - NS8390p_init(eifdev, 0). - We can't reliably read the SAPROM address without this. - (I learned the hard way!). */ - { - struct { - unsigned char value, offset; - } program_seq[] = { - /* Select page 0 */ - {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, - {0x49, EN0_DCFG}, /* Set WORD-wide (0x49) access. */ - {0x00, EN0_RCNTLO}, /* Clear the count regs. */ - {0x00, EN0_RCNTHI}, - {0x00, EN0_IMR}, /* Mask completion irq. */ - {0xFF, EN0_ISR}, - {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ - {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ - {32, EN0_RCNTLO}, - {0x00, EN0_RCNTHI}, - {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ - {0x00, EN0_RSARHI}, - {E8390_RREAD+E8390_START, E8390_CMD}, - }; - - for (i = 0; i < ARRAY_SIZE(program_seq); i++) - outb_p(program_seq[i].value, base_addr + - program_seq[i].offset); - - } - for(i = 0; i < 6 /*sizeof(SA_prom)*/; i+=1) { - SA_prom[i] = inb(base_addr + NE_DATAPORT); - } - - /* I don't know whether the previous sequence includes the general - board reset procedure, so better don't omit it and just overwrite - the garbage read from a DE-320 with correct stuff. */ - - if (mca_read_stored_pos(slot, 0) == 0xea) { - unsigned int v; - - for (i = 0; i < 3; i++) { - v = dlink_get_eeprom(i, base_addr); - SA_prom[(i << 1) ] = v & 0xff; - SA_prom[(i << 1) + 1] = (v >> 8) & 0xff; - } - } - - start_page = NESM_START_PG; - stop_page = NESM_STOP_PG; - - dev->irq=irq; - - /* Snarf the interrupt now. There's no point in waiting since we cannot - share and the board will usually be enabled. */ - retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk (" unable to get IRQ %d (irqval=%d).\n", - dev->irq, retval); - goto out; - } - - dev->base_addr = base_addr; - - for(i = 0; i < ETHER_ADDR_LEN; i++) - dev->dev_addr[i] = SA_prom[i]; - - printk(" %pM\n", dev->dev_addr); - - printk("%s: %s found at %#x, using IRQ %d.\n", - dev->name, name, base_addr, dev->irq); - - mca_set_adapter_procfn(slot, (MCA_ProcFn) ne2_procinfo, dev); - - ei_status.name = name; - ei_status.tx_start_page = start_page; - ei_status.stop_page = stop_page; - ei_status.word16 = (2 == 2); - - ei_status.rx_start_page = start_page + TX_PAGES; -#ifdef PACKETBUF_MEMSIZE - /* Allow the packet buffer size to be overridden by know-it-alls. */ - ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE; -#endif - - ei_status.reset_8390 = &ne_reset_8390; - ei_status.block_input = &ne_block_input; - ei_status.block_output = &ne_block_output; - ei_status.get_8390_hdr = &ne_get_8390_hdr; - - ei_status.priv = slot; - - dev->netdev_ops = &eip_netdev_ops; - NS8390p_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out1; - return 0; -out1: - mca_set_adapter_procfn( ei_status.priv, NULL, NULL); - free_irq(dev->irq, dev); -out: - release_region(base_addr, NE_IO_EXTENT); - return retval; -} - -/* Hard reset the card. This used to pause for the same period that a - 8390 reset command required, but that shouldn't be necessary. */ -static void ne_reset_8390(struct net_device *dev) -{ - unsigned long reset_start_time = jiffies; - - if (ei_debug > 1) - printk("resetting the 8390 t=%ld...", jiffies); - - /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ - outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); - - ei_status.txing = 0; - ei_status.dmaing = 0; - - /* This check _should_not_ be necessary, omit eventually. */ - while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) - if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk("%s: ne_reset_8390() did not complete.\n", - dev->name); - break; - } - outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - we don't need to be concerned with ring wrap as the header will be at - the start of a page, so we optimize accordingly. */ - -static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page) -{ - - int nic_base = dev->base_addr; - - /* This *shouldn't* happen. - If it does, it's the last thing you'll see */ - if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); - return; - } - - ei_status.dmaing |= 0x01; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); - outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); - outb_p(0, nic_base + EN0_RCNTHI); - outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ - outb_p(ring_page, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); - - if (ei_status.word16) - insw(NE_BASE + NE_DATAPORT, hdr, - sizeof(struct e8390_pkt_hdr)>>1); - else - insb(NE_BASE + NE_DATAPORT, hdr, - sizeof(struct e8390_pkt_hdr)); - - outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} - -/* Block input and output, similar to the Crynwr packet driver. If you - are porting to a new ethercard, look at the packet driver source for - hints. The NEx000 doesn't share the on-board packet memory -- you have - to put the packet out through the "remote DMA" dataport using outb. */ - -static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset) -{ -#ifdef NE_SANITY_CHECK - int xfer_count = count; -#endif - int nic_base = dev->base_addr; - char *buf = skb->data; - - /* This *shouldn't* happen. - If it does, it's the last thing you'll see */ - if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); - return; - } - ei_status.dmaing |= 0x01; - outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD); - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); - outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); - if (ei_status.word16) { - insw(NE_BASE + NE_DATAPORT,buf,count>>1); - if (count & 0x01) { - buf[count-1] = inb(NE_BASE + NE_DATAPORT); -#ifdef NE_SANITY_CHECK - xfer_count++; -#endif - } - } else { - insb(NE_BASE + NE_DATAPORT, buf, count); - } - -#ifdef NE_SANITY_CHECK - /* This was for the ALPHA version only, but enough people have - been encountering problems so it is still here. If you see - this message you either 1) have a slightly incompatible clone - or 2) have noise/speed problems with your bus. */ - if (ei_debug > 1) { /* DMA termination address check... */ - int addr, tries = 20; - do { - /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here - -- it's broken for Rx on some cards! */ - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - addr = (high << 8) + low; - if (((ring_offset + xfer_count) & 0xff) == low) - break; - } while (--tries > 0); - if (tries <= 0) - printk("%s: RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, ring_offset + xfer_count, addr); - } -#endif - outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} - -static void ne_block_output(struct net_device *dev, int count, - const unsigned char *buf, const int start_page) -{ - int nic_base = NE_BASE; - unsigned long dma_start; -#ifdef NE_SANITY_CHECK - int retries = 0; -#endif - - /* Round the count up for word writes. Do we need to do this? - What effect will an odd byte count have on the 8390? - I should check someday. */ - if (ei_status.word16 && (count & 0x01)) - count++; - - /* This *shouldn't* happen. - If it does, it's the last thing you'll see */ - if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); - return; - } - ei_status.dmaing |= 0x01; - /* We should already be in page 0, but to be safe... */ - outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD); - -#ifdef NE_SANITY_CHECK -retry: -#endif - -#ifdef NE8390_RW_BUGFIX - /* Handle the read-before-write bug the same way as the - Crynwr packet driver -- the NatSemi method doesn't work. - Actually this doesn't always work either, but if you have - problems with your NEx000 this is better than nothing! */ - outb_p(0x42, nic_base + EN0_RCNTLO); - outb_p(0x00, nic_base + EN0_RCNTHI); - outb_p(0x42, nic_base + EN0_RSARLO); - outb_p(0x00, nic_base + EN0_RSARHI); - outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD); - /* Make certain that the dummy read has occurred. */ - SLOW_DOWN_IO; - SLOW_DOWN_IO; - SLOW_DOWN_IO; -#endif - - outb_p(ENISR_RDC, nic_base + EN0_ISR); - - /* Now the normal output. */ - outb_p(count & 0xff, nic_base + EN0_RCNTLO); - outb_p(count >> 8, nic_base + EN0_RCNTHI); - outb_p(0x00, nic_base + EN0_RSARLO); - outb_p(start_page, nic_base + EN0_RSARHI); - - outb_p(E8390_RWRITE+E8390_START, nic_base + NE_CMD); - if (ei_status.word16) { - outsw(NE_BASE + NE_DATAPORT, buf, count>>1); - } else { - outsb(NE_BASE + NE_DATAPORT, buf, count); - } - - dma_start = jiffies; - -#ifdef NE_SANITY_CHECK - /* This was for the ALPHA version only, but enough people have - been encountering problems so it is still here. */ - - if (ei_debug > 1) { /* DMA termination address check... */ - int addr, tries = 20; - do { - int high = inb_p(nic_base + EN0_RSARHI); - int low = inb_p(nic_base + EN0_RSARLO); - addr = (high << 8) + low; - if ((start_page << 8) + count == addr) - break; - } while (--tries > 0); - if (tries <= 0) { - printk("%s: Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, (start_page << 8) + count, addr); - if (retries++ == 0) - goto retry; - } - } -#endif - - while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) - if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk("%s: timeout waiting for Tx RDC.\n", dev->name); - ne_reset_8390(dev); - NS8390p_init(dev, 1); - break; - } - - outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ - ei_status.dmaing &= ~0x01; -} - - -#ifdef MODULE -#define MAX_NE_CARDS 4 /* Max number of NE cards per module */ -static struct net_device *dev_ne[MAX_NE_CARDS]; -static int io[MAX_NE_CARDS]; -static int irq[MAX_NE_CARDS]; -static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */ -MODULE_LICENSE("GPL"); - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(bad, int, NULL, 0); -MODULE_PARM_DESC(io, "(ignored)"); -MODULE_PARM_DESC(irq, "(ignored)"); -MODULE_PARM_DESC(bad, "(ignored)"); - -/* Module code fixed by David Weinehall */ - -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->mem_end = bad[this_dev]; - dev->base_addr = io[this_dev]; - if (do_ne2_probe(dev) == 0) { - dev_ne[found++] = dev; - continue; - } - free_netdev(dev); - break; - } - if (found) - return 0; - printk(KERN_WARNING "ne2.c: No NE/2 card found\n"); - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - mca_mark_as_unused(ei_status.priv); - mca_set_adapter_procfn( ei_status.priv, NULL, NULL); - free_irq(dev->irq, dev); - release_region(dev->base_addr, NE_IO_EXTENT); -} - -void __exit cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { - struct net_device *dev = dev_ne[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ -- cgit v1.2.3