From 8a5c5cc61748642a1276ef94611e21a60f0796ab Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 4 May 2013 14:49:36 +0200 Subject: hwmon: (lm75) Per-chip configuration register initialization There is no standard for the configuration register bits of LM75-like chips. We shouldn't blindly clear bits setting the resolution as they are either unused or used for something else on some of the supported chips. So, switch to per-chip configuration initialization. This will allow for better tuning later, for example using more resolution bits when available. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck --- drivers/hwmon/lm75.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 291edfff55b..4670fbef6a9 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -167,8 +167,28 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) * Then tweak to be more precise when appropriate. */ set_mask = 0; - clr_mask = (1 << 0) /* continuous conversions */ - | (1 << 6) | (1 << 5); /* 9-bit mode */ + clr_mask = LM75_SHUTDOWN; /* continuous conversions */ + + switch (id->driver_data) { + case adt75: + clr_mask |= 1 << 5; /* not one-shot mode */ + break; + case ds1775: + case ds75: + case stds75: + clr_mask |= 3 << 5; /* 9-bit mode */ + break; + case mcp980x: + case tmp100: + case tmp101: + case tmp105: + case tmp175: + case tmp275: + case tmp75: + clr_mask |= 3 << 5; /* 9-bit mode */ + clr_mask |= 1 << 7; /* not one-shot mode */ + break; + } /* configure as specified */ status = lm75_read_value(client, LM75_REG_CONF); -- cgit v1.2.3