From b2bbb20b37d734443d1c279d0033a64f6095db54 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 29 Jun 2006 12:25:39 -0700 Subject: USB: pxa2xx_udc understands GPIO based VBUS sensing This updates the PXA 25x UDC board-independent infrastructure for VBUS sensing and the D+ pullup. The original code evolved from rather bizarre support on Intel's "Lubbock" reference hardware, so that on more sensible hardware it doesn't work as well as it could/should. The change is just to teach the UDC driver how to use built-in PXA GPIO pins directly. This reduces the amount of board-specfic object code needed, and enables the use of a VBUS sensing IRQ on boards (like Gumstix) that have one. With VBUS sensing, the UDC is unclocked until a host is actually connected. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-pxa/corgi.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cce26576999..337c01c4ac3 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -284,21 +284,9 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { /* * USB Device Controller */ -static void corgi_udc_command(int cmd) -{ - switch(cmd) { - case PXA2XX_UDC_CMD_CONNECT: - GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP); - break; - } -} - static struct pxa2xx_udc_mach_info udc_info __initdata = { /* no connect GPIO; corgi can't tell connection status */ - .udc_command = corgi_udc_command, + .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; @@ -350,7 +338,6 @@ static void __init corgi_init(void) corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN); pxa_set_udc_info(&udc_info); -- cgit v1.2.3