aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-22Regulator: Add TPS65023 regulator driverAnuj Aggarwal
Adding support for TI TPS65023 regulator driver Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: userspace: use sysfs_create_groupFelipe Balbi
and avoid introducing our own loops for creating several sysfs entries. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Add GPIO enable control to fixed voltage regulator driverRoger Quadros
Now fixed regulators that have their enable pin connected to a GPIO line can use the fixed regulator driver for regulator enable/disable control. The GPIO number and polarity information is passed through platform data. GPIO enable control is achieved using gpiolib. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com> Reviewed-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22Regulator: Implement list_voltage for pcf50633 regulator driver.Lars-Peter Clausen
This patch implements list_voltage for the pcf50644 regulator driver. As the voltages are linearly scaled the code to convert register values to voltages can be reused and most of the code can be shared with get_voltage. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: regulator_enable() permission checkingMark Brown
The regulator_enable() code wasn't actually checking that the machine constraints had given permission to enable the regulator. Add code to do that, but only if the regulator is not already on due to something like always_on or being left on at startup since in those cases there's no physical change being introduced and the constraint wouldn't make any sense. Also add matching code for disable(). We need to do less there since either regulator_enable() should have succeeded first or the board setup makes no sense. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Push locking for regulator_is_enabled() outMark Brown
Allows use by more of the internal regulator API code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Check for constraints in regulator_init_complete()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Check for constraints before using them for nameMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: More explict error reporting for fixed regulatorMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: da903x: consolidate DA903[045]_DVC macrosMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Improve virtual consumer probe error handlingMark Brown
Report errors to the user and try harder to clean up if we're not able to probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Fix support for deviceless supply mappingsMark Brown
The patch to add support for looking up consumers by device name had the side effect of causing us to require a device which is at best premature since at least cpufreq still operates outside the device model. Remove that requirement. Reported-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Warn when unregistering an in-use regulatorMark Brown
We're probably going to start oopsing fairly soon after this happens. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Add regulator voltage range check APIMark Brown
Simplify checking of support for voltage ranges by providing an API which wraps the existing count and list operations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Add regulator_get_exclusive() APIMark Brown
Some consumers require complete control of the regulator and can't tolerate sharing it with other consumers, most commonly because they need to have the regulator actually disabled so can't have other consumers forcing it on. This new regulator_get_exclusive() API call allows these consumers to explicitly request this, documenting the assumptions that they are making. In order to simplify coding of such consumers the use count for regulators they request is forced to match the enabled state of the regulator when it is requested. This is not possible for consumers which can share regulators due to the need to keep track of the ownership of use counts. A new API call is used rather than an additional argument to the existing regulator_get() in order to avoid merge headaches with driver code in other trees. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: support list voltage in da903xHaojian Zhuang
Make da903x driver to list voltage and count voltage. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: replace ADTV1 register by ADTV2 in da903xHaojian Zhuang
In PXA3xx SoC family, V_CORE power doamin is supplied by BUCK1 that is controller by ADTV1 or ADTV2 register. By default, v1 and v2 has the same copy. If v1 or v2 is updated, the last value that is written to either register takes effect. It means that v1 and v2 has different copy. And the actual voltage output is determinated by last update on either register. DA9034/35 is binded with PXA3xx SoC family. While SoC is scaling OP or entering/exiting lower power mode, SoC needs to change voltage of V_CORE power doamin. In order to be efficient, POWER I2C (hardcode) mode could be enabled in SoC. In this mode, SoC will control v2 register directly. In original DA903x driver, software will only read regulator data from v1 register. But SoC controls v2 register directly. It results that v1 and v2 isn't synchronized. Wrong data will be read from v1 register. So access v2 register in da903x driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: support da9030 BUCK in da903x driverHaojian Zhuang
Support the operation of DA9030 BUCK2 in da903x driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: add buck3 in da903x driverHaojian Zhuang
BUCK3 is the new component in DA9035. So there're three BUCKs in DA9035. And there're two BUCKs in DA9034. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22drivers/regulator/pcf50633-regulator.c: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Allow consumer supplies to be set up with dev_name()Mark Brown
Follow the approach suggested by Russell King and implemented by him in the clkdev API and allow consumer device supply mapings to be set up using the dev_name() for the consumer instead of the struct device. In order to avoid making existing machines instabuggy and creating merge issues the use of struct device is still supported for the time being. This resolves problems working with buses such as I2C which make the struct device available late providing that the final device name is known, which is the case for most embedded systems with fixed setups. Consumers must still use the struct device when calling regulator_get(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Make virtual consumer a bit more chattyMark Brown
This makes it easier to read the logs when doing testing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Make virtual consumer use dev_printkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Report regulator_get() failure in virtual consumerMark Brown
The core will no longer complain so we should log an error here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: add check index of wm8350->pmic.pdev[]Roel Kluin
Ensure that reg is within the bounds of array wm8350->pmic.pdev[]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-21Merge branch 'perfcounters-rename-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Tidy up after the big rename perf: Do the big rename: Performance Counters -> Performance Events perf_counter: Rename 'event' to event_id/hw_event perf_counter: Rename list_entry -> group_entry, counter_list -> group_list Manually resolved some fairly trivial conflicts with the tracing tree in include/trace/ftrace.h and kernel/trace/trace_syscalls.c.
2009-09-21Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Print the hypervisor returned tsc_khz during boot x86: Correct segment permission flags in 64-bit linker script x86: cpuinit-annotate SMP boot trampolines properly x86: Increase timeout for EHCI debug port reset completion in early printk x86: Fix uaccess_32.h typo x86: Trivial whitespace cleanups x86, apic: Fix missed handling of discrete apics x86/i386: Remove duplicated #include x86, mtrr: Convert loop to a while based construct, avoid naked semicolon Revert 'x86: Fix system crash when loading with "reservetop" parameter' x86, mce: Fix compile warning in case of CONFIG_SMP=n x86, apic: Use logical flat on intel with <= 8 logical cpus x86: SGI UV: Map MMIO-High memory range x86: SGI UV: Add volatile semantics to macros that access chipset registers x86: SGI UV: Fix IPI macros x86: apic: Convert BUG() to BUG_ON() x86: Remove final bits of CONFIG_X86_OLD_MCE
2009-09-21Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (222 commits) V4L/DVB (13033): pt1: Don't use a deprecated DMA_BIT_MASK macro V4L/DVB (13029): radio-si4713: remove #include <linux/version.h> V4L/DVB (13027): go7007: convert printks to v4l2_info V4L/DVB (13026): s2250-board: Implement brightness and contrast controls V4L/DVB (13025): s2250-board: Fix memory leaks V4L/DVB (13024): go7007: Implement vidioc_g_std and vidioc_querystd V4L/DVB (13023): go7007: Merge struct gofh and go declarations V4L/DVB (13022): go7007: Fix mpeg controls V4L/DVB (13021): go7007: Fix whitespace and line lengths V4L/DVB (13020): go7007: Updates to Kconfig and Makefile V4L/DVB (13019): video: initial support for ADV7180 V4L/DVB (13018): kzalloc failure ignored in au8522_probe() V4L/DVB (13017): gspca: kmalloc failure ignored in sd_start() V4L/DVB (13016): kmalloc failure ignored in lgdt3304_attach() and s921_attach() V4L/DVB (13015): kmalloc failure ignored in m920x_firmware_download() V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part only) V4L/DVB (13013): FM TX: si4713: Kconfig: Fixed two typos. V4L/DVB (13012): uvc: introduce missing kfree V4L/DVB (13011): Change tuner type of BeholdTV cards V4L/DVB (13009): gspca - stv06xx-hdcs: Reduce exposure range ...
2009-09-21Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: improve NOR flash erasure quirk UBI: introduce flash dump helper UBI: eliminate possible undefined behaviour UBI: print a warning if too many PEBs are corrupted UBI: amend NOR flash pre-erase quirk UBI: print a message if ECH is corrupted and VIDH is ok
2009-09-21Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits) drm/vgaarb: add VGA arbitration support to the drm and kms. drm/radeon: some r420s have a CP race with the DMA engine. drm/radeon/r600/kms: rv670 is not DCE3 drm/radeon/kms: r420 idle after programming GA_ENHANCE drm/radeon/kms: more fixes to rv770 suspend/resume path. drm/radeon/kms: more alignment for rv770.c with r600.c drm/radeon/kms: rv770 blit init called too late. drm/radeon/kms: move around new init path code to avoid posting at init drm/radeon/r600: fix some issues with suspend/resume. drm/radeon/kms: disable VGA rendering engine before taking over VRAM drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init(). drm/radeon/kms: add initial connector properties drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian. drm/radeon/kms: don't fail if we fail to init GPU acceleration drm/r600/kms: fixup number of loops per blit calculation. drm/radeon/kms: reprogram format in set base. drm/radeon: avivo chips have no separate int bit for display drm/radeon/r600: don't do interrupts drm: fix _DRM_GEM addmap error message drm: update crtc x/y when only fb changes ... Fixed up trivial conflicts in firmware/Makefile due to network driver (cxgb3) and drm (mga/r128/radeon) firmware being listed next to each other.
2009-09-21Driver-Core: fix devnode callbacks for dabusb and industrialioIngo Molnar
The build of the dabusb driver broke: drivers/media/video/dabusb.c:758: error: unknown field 'nodename' specified in initializer drivers/media/video/dabusb.c:758: warning: initialization from incompatible pointer type make[3]: *** wait: No child processes. Stop. Due to this commit: e454cea: Driver-Core: extend devnode callbacks to provide permissions Missing the dabusb driver's dabusb_nodename() callback. Similar issues with the iio/industrialio driver in staging, pointed out and patched by Jean Delvare. Signed-off-by: Ingo Molnar <mingo@elte.hu> Industrialio-parts-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21drm/vgaarb: add VGA arbitration support to the drm and kms.Dave Airlie
VGA arb requires DRM support for non-kms drivers, to turn on/off irqs when disabling the mem/io regions. VGA arb requires KMS support for GPUs where we can turn off VGA decoding. Currently we know how to do this for intel and radeon kms drivers, which allows them to be removed from the arbiter. This patch comes from Fedora rawhide kernel. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon: some r420s have a CP race with the DMA engine.Alex Deucher
This patch makes sure the CP doesn't DMA do VRAM while 2D is active by inserting a CP resync token. todo: port to kms. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon/r600/kms: rv670 is not DCE3Alex Deucher
RV670 was using the wrong modesetting code. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon/kms: r420 idle after programming GA_ENHANCEDave Airlie
https://bugs.freedesktop.org/show_bug.cgi?id=24041 The idle allows rs690 to startup properly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21drm/radeon/kms: more fixes to rv770 suspend/resume path.Dave Airlie
This resumes my RV730PRO (4650) RV770 (4850) fine. Still researching the RV4550 (RV710), resumes without X fine. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6: includecheck fix: x86, cpu/common.c includecheck fix: kernel/trace, ring_buffer.c includecheck fix: include/linux, ftrace.h includecheck fix: include/linux, page_cgroup.h includecheck fix: include/linux, aio.h includecheck fix: include/drm, drm_memory.h includecheck fix: include/acpi, acpi_bus.h includecheck fix: drivers/xen, evtchn.c includecheck fix: drivers/video, vgacon.c includecheck fix: drivers/scsi, ibmvscsi.c includecheck fix: drivers/scsi, libfcoe.c includecheck fix: x86, shadow.c includecheck fix: x86, traps.c includecheck fix: um, helper.c includecheck fix: s390, sys_s390.c
2009-09-20Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux: [PATCH] i2c-imx: make bus available early i2c-mv64xxx: correct mv64xxx_i2c_intr() return type
2009-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Driver-Core: extend devnode callbacks to provide permissions
2009-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (79 commits) USB serial: update the console driver usb-serial: straighten out serial_open usb-serial: add missing tests and debug lines usb-serial: rename subroutines usb-serial: fix termios initialization logic usb-serial: acquire references when a new tty is installed usb-serial: change logic of serial lookups usb-serial: put subroutines in logical order usb-serial: change referencing of port and serial structures tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl tty: Char: mxser, add support for CP112UL uartlite: support shared interrupt lines tty: USB: serial/mct_u232, fix tty refcnt tty: riscom8, fix tty refcnt tty: riscom8, fix shutdown declaration TTY: fix typos tty: Power: fix suspend vt regression tty: vt: use printk_once tty: handle VT specific compat ioctls in vt driver n_tty: move echoctl check and clean up logic ...
2009-09-20Merge branch 'perfcounters-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (58 commits) perf_counter: Fix perf_copy_attr() pointer arithmetic perf utils: Use a define for the maximum length of a trace event perf: Add timechart help text and add timechart to "perf help" tracing, x86, cpuidle: Move the end point of a C state in the power tracer perf utils: Be consistent about minimum text size in the svghelper perf timechart: Add "perf timechart record" perf: Add the timechart tool perf: Add a SVG helper library file tracing, perf: Convert the power tracer into an event tracer perf: Add a sample_event type to the event_union perf: Allow perf utilities to have "callback" options without arguments perf: Store trace event name/id pairs in perf.data perf: Add a timestamp to fork events sched_clock: Make it NMI safe perf_counter: Fix up swcounter throttling x86, perf_counter, bts: Optimize BTS overflow handling perf sched: Add --input=file option to builtin-sched.c perf trace: Sample timestamp and cpu when using record flag perf tools: Increase MAX_EVENT_LENGTH perf tools: Fix memory leak in read_ftrace_printk() ...
2009-09-20Merge branch 'linus' into x86/urgentIngo Molnar
Merge reason: Bring in changes that the next patch will depend on. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20x86: Trivial whitespace cleanupsFelipe Contreras
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alok N Kataria <akataria@vmware.com> Cc: "Tan Wei Chong" <wei.chong.tan@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Bob Moore <robert.moore@intel.com> LKML-Reference: <1253137123-18047-2-git-send-email-felipe.contreras@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20includecheck fix: drivers/xen, evtchn.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: drivers/xen/evtchn.c: linux/errno.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: chrisw@sous-sol.org Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247067749.4382.90.camel@ht.satnam> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-09-20includecheck fix: drivers/video, vgacon.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: drivers/video/console/vgacon.c: linux/slab.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Martin Mares <mj@ucw.cz> Cc: mchehab@infradead.org Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247067624.4382.88.camel@ht.satnam>
2009-09-20includecheck fix: drivers/scsi, ibmvscsi.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: drivers/scsi/ibmvscsi/ibmvscsi.c: asm/firmware.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247067016.4382.78.camel@ht.satnam> Acked-by: Brian King <brking@linux.vnet.ibm.com>
2009-09-20includecheck fix: drivers/scsi, libfcoe.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: drivers/scsi/fcoe/libfcoe.c: linux/netdevice.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247066936.4382.76.camel@ht.satnam>
2009-09-19[PATCH] i2c-imx: make bus available earlyWolfram Sang
As I2C is used by PMICs also, make the busses available early via subsys_initcall(). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-09-19i2c-mv64xxx: correct mv64xxx_i2c_intr() return typeMikael Pettersson
The mv64xxx_i2c_intr() irq handler in drivers/i2c/busses/i2c-mv64xxx.c is declared as returning 'int', resulting in this compile-time warning: drivers/i2c/busses/i2c-mv64xxx.c: In function 'mv64xxx_i2c_probe': drivers/i2c/busses/i2c-mv64xxx.c:540: warning: passing argument 2 of 'request_irq' from incompatible pointer type Fix: correct the return type to 'irqreturn_t'. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 12:41:08 +0000