aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2014-03-23spi: spi-ath79: fix initial GPIO CS line setupGabor Juhos
commit 61d1cf163c8653934cc8cd5d0b2a562d0990c265 upstream. The 'ath79_spi_setup_cs' function initializes the chip select line of a given SPI device in order to make sure that the device is inactive. If the SPI_CS_HIGH bit is set for a given device, it means that the CS line of that device is active HIGH so it must be set to LOW initially. In case of GPIO CS lines, the 'ath79_spi_setup_cs' function does the opposite of that due to the wrong GPIO flags. Fix the code to use the correct GPIO flags. Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22spi: Fix crash with double message finalisation on error handlingGeert Uytterhoeven
commit 1f802f8249a0da536877842c43c7204064c4de8b upstream. This reverts commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d. It causes a NULL pointer dereference with drivers using the generic spi_transfer_one_message(), which always calls spi_finalize_current_message(), which zeroes master->cur_msg. Drivers implementing transfer_one_message() theirselves must always call spi_finalize_current_message(), even if the transfer failed: * @transfer_one_message: the subsystem calls the driver to transfer a single * message while queuing transfers that arrive in the meantime. When the * driver is finished with this message, it must call * spi_finalize_current_message() so the subsystem can issue the next * transfer Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13spidev: fix hang when transfer_one_message failsDaniel Santos
commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d upstream. This corrects a problem in spi_pump_messages() that leads to an spi message hanging forever when a call to transfer_one_message() fails. This failure occurs in my MCP2210 driver when the cs_change bit is set on the last transfer in a message, an operation which the hardware does not support. Rationale Since the transfer_one_message() returns an int, we must presume that it may fail. If transfer_one_message() should never fail, it should return void. Thus, calls to transfer_one_message() should properly manage a failure. Fixes: ffbbdd21329f3 (spi: create a message queueing infrastructure) Signed-off-by: Daniel Santos <daniel.santos@pobox.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13spi/bcm63xx: don't substract prepend length from total lengthJonas Gorski
commit 86b3bde003e6bf60ccb9c09b4115b8a2f533974c upstream. The spi command must include the full message length including any prepended writes, else transfers larger than 256 bytes will be incomplete. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11spi: spi-davinci: Fix direction in dma_map_single()Christian Eggers
commit 89c66ee890af18500fa4598db300cc07c267f900 upstream. Commit 048177ce3b3962852fd34a7e04938959271c7e70 (spi: spi-davinci: convert to DMA engine API) introduced a regression: dma_map_single() is called with direction DMA_FROM_DEVICE for rx and for tx. Signed-off-by: Christian Eggers <ceggers@gmx.de> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24Merge remote-tracking branch 'spi/fix/s3c64xx' into spi-linusMark Brown
2013-06-21spi/pxa2xx: fix memory corruption due to wrong size used in devm_kzalloc()Mika Westerberg
ACPI part of the driver accidentally used sizeof(*ssp) instead of the correct sizeof(*pdata). This leads to nasty memory corruptions like the one below: BUG: unable to handle kernel paging request at 0000000749fd30b8 IP: [<ffffffff813fe8a1>] __list_del_entry+0x31/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 3.10.0-rc6v3.10-rc6_sdhci_modprobe+ #443 task: ffff8801483a0940 ti: ffff88014839e000 task.ti: ffff88014839e000 RIP: 0010:[<ffffffff813fe8a1>] [<ffffffff813fe8a1>] __list_del_entry+0x31/0xd0 RSP: 0000:ffff88014839fde8 EFLAGS: 00010046 RAX: ffff880149fd30b0 RBX: ffff880149fd3040 RCX: dead000000200200 RDX: 0000000749fd30b0 RSI: ffff880149fd3058 RDI: ffff88014834d640 RBP: ffff88014839fde8 R08: ffff88014834d640 R09: 0000000000000001 R10: ffff8801483a0940 R11: 0000000000000001 R12: ffff880149fd3040 R13: ffffffff810e0b30 R14: ffff8801483a0940 R15: ffff88014834d640 FS: 0000000000000000(0000) GS:ffff880149e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000168 CR3: 0000000001e0b000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88014839fe48 ffffffff810e0baf ffffffff81120abd ffff88014839fe20 ffff8801483a0940 ffff8801483a0940 ffff8801483a0940 ffff8801486b1c90 ffff88014834d640 ffffffff810e0b30 0000000000000000 0000000000000000 Call Trace: [<ffffffff810e0baf>] worker_thread+0x7f/0x390 [<ffffffff81120abd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810e0b30>] ? manage_workers.isra.22+0x2b0/0x2b0 [<ffffffff810e6c09>] kthread+0xd9/0xe0 [<ffffffff810f93df>] ? local_clock+0x3f/0x50 [<ffffffff810e6b30>] ? kthread_create_on_node+0x110/0x110 [<ffffffff818c5dec>] ret_from_fork+0x7c/0xb0 [<ffffffff810e6b30>] ? kthread_create_on_node+0x110/0x110 Fix this by using the right structure size in devm_kzalloc(). Reported-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org # 3.9+
2013-06-18spi/pxa2xx: use GFP_ATOMIC in sg table allocationMika Westerberg
pxa2xx_spi_map_dma_buffer() gets called in tasklet context so we can't sleep when we allocate a new sg table. Use GFP_ATOMIC here instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-06-10spi: s3c64xx: Fix pm_runtime_get_sync() return value checkSylwester Nawrocki
If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Without this patch there are seen errors like: [ 8.540000] s3c64xx-spi 13930000.spi: Failed to enable device: 1 [ 8.545000] spi_master spi1: failed to prepare transfer hardware Likely because the driver uses synchronous API to runtime enable the device and asynchronous one to disable it. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonielinaro.org> Cc: stable@vger.kernel.org
2013-06-04Merge remote-tracking branch 'spi/fix/xilinx' into spi-linusMark Brown
2013-06-04Merge remote-tracking branch 'spi/fix/topcliff' into spi-linusMark Brown
2013-06-04Merge remote-tracking branch 'spi/fix/hspi' into spi-linusMark Brown
2013-06-04spi: hspi: fixup long delay timeKuninori Morimoto
Current HSPI driver is using msleep(20) on hspi_status_check_timeout(), but it was too long delay for SPI device. Bock-W board SPI access was too slow without this patch. This patch uses udelay(10) for it. Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-06-04spi: spi-xilinx: Remove ISR race conditionPeter Crosthwaite
The ISR currently consumes the rx buffer data and re-enables transmission from within interrupt context. This is bad because if the interrupt occurs again before the ISR exits, the new interrupt will be erroneously cleared by the still completing ISR. Simplified the ISR by just setting the completion variable and exiting with no action. Then just looped the transmit functionality in xilinx_spi_txrx_bufs(). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-22spi: topcliff-pch: fix error return code in pch_spi_probe()Wei Yongjun
Fix to return -ENOMEM in the platform_device_alloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-20spi: topcliff-pch: Pass correct pointer to free_irq()Lars-Peter Clausen
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-18Merge branch 'devm_no_resource_check' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull devm usage cleanup from Wolfram Sang: "Lately, I have been experimenting how to improve the devm interface to make writing device drivers easier and less error prone while also getting rid of its subtle issues. I think it has more potential but still needs work and definately conistency, especiall in its usage. The first thing I come up with is a low hanging fruit regarding devm_ioremap_resouce(). This function already checks if the passed resource is valid and gives an error message if not. So, we can remove similar checks from the drivers and get rid of a bit of code and a number of inconsistent error strings. This series only removes the unneeded check iff devm_ioremap_resource follows platform_get_resource directly. The previous version tried to shuffle code if needed, too, what lead to an embarrasing bug. It turned out to me that shuffling code for all cases found will make the automated script too complex, so I am unsure if an automated cleanup is the proper tool for this case. Removing the easy stuff seems worthwhile to me, though. Despite various architectures and platform dependencies, I managed to compile test 45 out of 57 modified files locally using heuristics and defconfigs." Pulled because: 296 deletions, 0 additions. * 'devm_no_resource_check' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits) sound/soc/kirkwood: don't check resource with devm_ioremap_resource sound/soc/fsl: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource arch/arm/plat-samsung: don't check resource with devm_ioremap_resource arch/arm/mach-tegra: don't check resource with devm_ioremap_resource drivers/watchdog: don't check resource with devm_ioremap_resource drivers/w1/masters: don't check resource with devm_ioremap_resource drivers/video/omap2/dss: don't check resource with devm_ioremap_resource drivers/video/omap2: don't check resource with devm_ioremap_resource drivers/usb/phy: don't check resource with devm_ioremap_resource drivers/usb/host: don't check resource with devm_ioremap_resource drivers/usb/gadget: don't check resource with devm_ioremap_resource drivers/usb/chipidea: don't check resource with devm_ioremap_resource drivers/thermal: don't check resource with devm_ioremap_resource drivers/staging/nvec: don't check resource with devm_ioremap_resource drivers/staging/dwc2: don't check resource with devm_ioremap_resource drivers/spi: don't check resource with devm_ioremap_resource drivers/rtc: don't check resource with devm_ioremap_resource drivers/pwm: don't check resource with devm_ioremap_resource drivers/pinctrl: don't check resource with devm_ioremap_resource ...
2013-05-18drivers/spi: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-05-13Merge remote-tracking branch 'spi/fix/grant' into spi-linusMark Brown
2013-05-13Merge remote-tracking branch 'spi/fix/atmel' into spi-linusMark Brown
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-07Merge tag 'cleanup-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
2013-05-07Merge tag 'dt-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
2013-05-06Merge branch 'late/dt' into next/dt2Arnd Bergmann
This is support for the ARM Chromebook, originally scheduled as a "late" pull request. Since it's already late now, we can combine this into the existing next/dt2 branch. * late/dt: ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
2013-05-02spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIORichard Genoud
Fix using PIO transfer mode only support 8 bits transfer, doesn't support 16 bits. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-29Merge tag 'spi-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, mainly driver work. A few highlights: - Supports bits per word compatibility checking in the core. - Allow use of the IP used in Freescale SPI controllers outside Freescale SoCs. - DMA support for the Atmel SPI driver. - New drivers for the BCM2835 and Tegra114" * tag 'spi-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits) spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list items spi-topcliff-pch: missing platform_driver_unregister() on error in pch_spi_init() ARM: dts: add pinctrl property for spi node for atmel SoC ARM: dts: add spi nodes for the atmel boards ARM: dts: add spi nodes for atmel SoC ARM: at91: add clocks for spi dt entries spi/spi-atmel: add dmaengine support spi/spi-atmel: add flag to controller data for lock operations spi/spi-atmel: add physical base address spi/sirf: fix MODULE_DEVICE_TABLE MAINTAINERS: Add git repository and update my address spi/s3c64xx: Check for errors in dmaengine prepare_transfer() spi/s3c64xx: Fix non-dmaengine usage spi: omap2-mcspi: fix error return code in omap2_mcspi_probe() spi/s3c64xx: let device core setup the default pin configuration MAINTAINERS: Update Grant's email address and maintainership spi: omap2-mcspi: Fix transfers if DMADEVICES is not set spi: s3c64xx: move to generic dmaengine API spi-gpio: init CS before spi_bitbang_setup() spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loop ...
2013-04-28spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list itemsWei Yongjun
Since we will remove items off the list using list_del_init() we need to use a safe version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-25spi-topcliff-pch: missing platform_driver_unregister() on error in ↵Wei Yongjun
pch_spi_init() Add the missing platform_driver_unregister() before return from pch_spi_init() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24spi/spi-atmel: add dmaengine supportNicolas Ferre
Add dmaengine support. Using "has_dma_support" member of struct is used to select the transfer mode: dmaengine or pdc. For the dmaengine transfer mode, it supports both 8 bits and 16 bits transfer. For the dmaengine transfer mode, if it fails to config dmaengine, or if the message length is less than 16 bytes, it will use the PIO transfer mode. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: using "has_dma_support" to select dmaengine as the spi xfer mode] [wenyou.yang@atmel.com: fix DMA: OOPS if buffer > 4096 bytes] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [richard.genoud@gmail.com: update with dmaengine interface] [richard.genoud@gmail.com: fix __init/__devinit sections mismatch] [richard.genoud@gmail.com: adapt to slave_config changes] [richard.genoud@gmail.com: add support t0 16 bits transfer] Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/spi-atmel: add flag to controller data for lock operationsNicolas Ferre
Will allow to drop the lock during DMA operations. Replacing non-irqsave versions with irqsave versions of the lock to make it correct in both pdc and dmaengine transfer mode Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/spi-atmel: add physical base addressNicolas Ferre
Needed for future use with dmaengine enabled driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/sirf: fix MODULE_DEVICE_TABLEArnd Bergmann
This fixes building the spi-sirf driver as a loadable module, which uses an incorrect MODULE_DEVICE_TABLE, by changing the reference to the correct symbol. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-19Merge branch 'spear/dwdma' into late/cleanupArnd Bergmann
This is a series originally prepared for inclusion in 3.9, which did not work out because of dependencies on the dmaengine driver. All the changes for the dmaengine code are merged in 3.9 now, so we can finally do the switchover and remove the now unnecessary dma definitions for spear13xx from the platform code. The dma platform_data actually made up the majority of the spear13xx platform code overall, so moving that into device tree files makes the code substantially smaller. * spear/dwdma: ata: arasan: remove the need for platform_data ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT serial: pl011: use generic DMA slave configuration if possible spi: pl022: use generic DMA slave configuration if possible Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-18spi/s3c64xx: Check for errors in dmaengine prepare_transfer()Mark Brown
Don't silently ignore errors, report them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18spi/s3c64xx: Fix non-dmaengine usageMark Brown
The multiplatform conversion in commit 788437 (spi: s3c64xx: move to generic dmaengine API) tested for the use of the Samsung-specific DMA API with SAMSUNG_DMADEV when in fact S3C_DMA should be used. This renderd DMA based transfers non-functional on platforms not using dmaengine. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18spi: omap2-mcspi: fix error return code in omap2_mcspi_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-17Merge tag 'davinci-for-v3.10/dt-2-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt2 From Sekhar Nori: v3.10 DT updates for DaVinci This set of patches adds support for PWMs and SPI controller present on DA850 and for SPI flash present on DA850 EVM. * tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: davinci: da850: add EHRPWM & ECAP DT node ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: davinci: da850: add tps6507x regulator DT data ARM: regulator: add tps6507x device tree data ARM: davinci: remove test for undefined Kconfig macro ARM: davinci: mmc: derive version information from device name ARM: davinci: da850: add ECAP & EHRPWM clock nodes ARM: davinci: clk framework support for enable/disable functionality Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-17spi/davinci: no wildcards in DT compatible propertyManjunathappa, Prakash
Follow DT naming convention for compatible property of the blob. Use first chip name that introduced the specific version of the device. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-16spi/s3c64xx: let device core setup the default pin configurationThomas Abraham
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-04-16Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-15spi: omap2-mcspi: Fix transfers if DMADEVICES is not setTony Lindgren
Selecting CONFIG_DMADEVICES is optional, and we must be able to continue even without DMA. Otherwise things like omap4430sdp nfsroot will fail if DMA is not selected. Note that the driver already supports PIO mode, but we fail to fall back to PIO if requesting DMA channels fails. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-12spi: s3c64xx: move to generic dmaengine APIArnd Bergmann
The spi-s3c64xx uses a Samsung proprietary interface for talking to the DMA engine, which does not work with multiplatform kernels. This version of the patch leaves the old code in place, behind an #ifdef. This can be removed in the future, after the s3c64xx platform start supporting the regular dmaengine interface. An earlier version of this patch was tested successfully on exynos5250 by Padma Venkat. The conversion was rather mechanical, since the samsung interface is just a shallow wrapper around the dmaengine interface. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10spi-gpio: init CS before spi_bitbang_setup()Josef Ahmad
spi_bitbang_setup() deasserts the chip select line to initialise the device. The chip select GPIO line is obtained from spi_gpio->cs_gpios[] private data. Currently, devices that are not registered under devicetree environment will call into spi_bitbang_setup() with stale cs_gpios[]. This patch ensures spi_gpio->cs_gpios[] is always initialised prior to calling spi_bitbang_setup(). Reviewed-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Josef Ahmad <josef.ahmad@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-09spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loopAnatolij Gustschin
There is no need to disable transmitter/receiver after each loop iteration and re-enable it for next loop iteration. Enable the transmitter/receiver before xfer loop starts and disable it when the whole transfer is done. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-09spi: spi-mpc512x-psc: add support for gpio chip selectsAnatolij Gustschin
Currently the driver only uses one internal chip select. Add support for gpio chip selects configured by cs-gpios DT binding. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi/bcm63xx: remove unused speed_hz variableJonas Gorski
speed_hz is a write only member, so we can safely remove it and its generation. Also fixes the missing clk_put after getting the periph clock. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi: tegra: slink: make local symbols staticWei Yongjun
Neither tegra20_spi_cdata nor tegra30_spi_cdata are used outside this file so they can, and should, be static. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi/pxa2xx: Convert to devm_ioremap_resource()Sachin Kamat
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-07spi/davinci: fix module build errorManjunathappa, Prakash
Fix below module build error: CC [M] drivers/spi/spi-davinci.o drivers/spi/spi-davinci.c:774:1: error: '__mod_of_device_table' aliased to undefined symbol 'davini_spi_of_match' drivers/spi/spi-davinci.c:774:1: error: '__mod_of_device_table' aliased to undefined symbol 'davini_spi_of_match' make[2]: *** [drivers/spi/spi-davinci.o] Error 1 make[1]: *** [drivers/spi] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [drivers] Error 2 Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi: Return error from of_spi_register_master on bad "cs-gpios" propertyAndreas Larsson
This makes sure that an error is returned on an incorrectly formed "cs-gpios" property, but reports success when the "cs-gpios" property is well formed or missing. When holes in the cs-gpios property phandle list is used to indicate that some other form of chipselect is to be used it is important that failure to read a broken "cs-gpios" property does not silently fail leading to the spi controller to use an unintended chipselect. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>