aboutsummaryrefslogtreecommitdiff
path: root/drivers/regulator/anatop-regulator.c
AgeCommit message (Collapse)Author
2013-02-08regulator: anatop: improve precision of delay timeShawn Guo
For cpufreq example, it takes 13 steps (25 mV for one step) to increase vddcore from 0.95 V to 1.275 V, and the time of 64 clock cycles at 24 MHz for one step is ~2.67 uS, so the total delay time would be ~34.71 uS. But the current calculation in the driver gives 39 uS. Change the formula to have the addition of 1 be the last step, so that we can get a more precise delay time. For example above, the new formula will give 35 uS. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-31regulators: anatop: add set_voltage_time_sel interfaceAnson Huang
some of anatop's regulators(cpu, vddpu and vddsoc) have register settings about LDO's step time, which will impact the LDO ramp up speed, need to use set_voltage_time_sel interface to add necessary delay everytime LDOs' voltage is increased. offset 0x170: bit [24-25]: cpu bit [26-27]: vddpu bit [28-29]: vddsoc field definition: 0'b00: 64 cycles of 24M clock; 0'b01: 128 cycles of 24M clock; 0'b02: 256 cycles of 24M clock; 0'b03: 512 cycles of 24M clock; Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03Drivers: regulator: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-10Merge remote-tracking branch 'regulator/topic/min' into regulator-nextMark Brown
2012-12-10regulator: anatop: Use regulator_[get|set]_voltage_sel_regmapAxel Lin
Call regulator_[get|set]_voltage_sel_regmap instead of open code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Ying-Chun Liu <paulliu@debian.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10regulator: anatop: Use linear_min_sel with linear mappingAxel Lin
By setting linear_min_sel to anatop_reg->min_bit_val, we can avoid adjust the anatop_reg->min_bit_val offset in [set|get]_voltage_sel. With this chance we can refactor this driver to use regulator_[get|set]_voltage_sel_regmap. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Ying-Chun Liu <paulliu@debian.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-05Merge tag 'mfd-3.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
2012-09-17regulator: anatop-regulator: Convert to use syscon to access anatop registerDong Aisheng
Using syscon to access anatop register. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-07regulator: anatop: Fix wrong mask used in anatop_get_voltage_selAxel Lin
The mask used in anatop_get_voltage_sel does not match the mask used in anatop_set_voltage_sel. We need to do left shift anatop_reg->vol_bit_shift bits for the correct mask. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25Merge tag 'v3.5-rc4' into regulator-driversMark Brown
Linux 3.5-rc4 contains patches which conflict with some of the development work.
2012-06-11regulator: anatop: Convert to set_voltage_sel and regulator_map_voltage_linearAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: anatop: Use correct __devexit_p annotationAxel Lin
__devexit functions are discarded when CONFIG_HOTPLUG is not set, so the symbol needs to be referenced carefully. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: anatop: Convert to regulator_list_voltage_linear()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-20mfd: Make anatop register accessor more flexible and rename meaningfullyRichard Zhao
- rename to anatop_read_reg and anatop_write_reg - anatop_read_reg directly return reg value - anatop_write_reg write reg with mask Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-12Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown
'regulator/topic/regmap' and 'regulator/topic/register' into regulator-next
2012-04-10Merge tag 'regulator-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull a regulator build fix from Mark Brown: "Fix a build warning in the anatop driver for 3.4 This is a trivial rename to stop the build system complaining that we're referencing things we shouldn't be." * tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: anatop: fix 'anatop_regulator' name collision
2012-04-10regulator: Convert anatop to use a struct to pass in regulator runtime ↵Axel Lin
configuration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-02regulator: anatop: fix 'anatop_regulator' name collisionShawn Guo
There is a name collision between 'struct platform_driver anatop_regulator' and 'struct anatop_regulator', which causes some section mismatch warnings like below. WARNING: vmlinux.o(.data+0x154d4): Section mismatch in reference from the variable anatop_regulator to the function .devinit.text:anatop_regulator_probe() The variable anatop_regulator references the function __devinit anatop_regulator_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Rename 'struct platform_driver anatop_regulator' to 'struct platform_driver anatop_regulator_driver' to fix the warnings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-28regulator: anatop: patching to device-tree property "reg".Ying-Chun Liu (PaulLiu)
Change "reg" to "anatop-reg-offset" due to there is a warning of handling no size field in reg. This patch also adds the missing device-tree binding documentation. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-14regulator: Add Anatop regulator driverYing-Chun Liu (PaulLiu)
Anatop is an integrated regulator inside i.MX6 SoC. There are 3 digital regulators which controls PU, CORE (ARM), and SOC. And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB). This patch adds the Anatop regulator driver. Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>