aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/oprofile/backtrace.c
AgeCommit message (Collapse)Author
2012-02-20x86: Factor out TIF_IA32 from 32-bit address spaceH. Peter Anvin
Factor out IA32 (compatibility instruction set) from 32-bit address space in the thread_info flags; this is a precondition patch for x32 support. Originally-by: H. J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org
2011-07-21x86, perf: Make copy_from_user_nmi() a library functionRobert Richter
copy_from_user_nmi() is used in oprofile and perf. Moving it to other library functions like copy_from_user(). As this is x86 code for 32 and 64 bits, create a new file usercopy.c for unified code. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110607172413.GJ20052@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-15oprofile, x86: Fix nmi-unsafe callgraph supportRobert Richter
Current oprofile's x86 callgraph support may trigger page faults throwing the BUG_ON(in_nmi()) message below. This patch fixes this by using the same nmi-safe copy-from-user code as in perf. ------------[ cut here ]------------ kernel BUG at .../arch/x86/kernel/traps.c:436! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/0000:07:00.0/0000:08:04.0/net/eth0/broadcast CPU 5 Modules linked in: Pid: 8611, comm: opcontrol Not tainted 2.6.39-00007-gfe47ae7 #1 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff813e8e35>] [<ffffffff813e8e35>] do_nmi+0x22/0x1ee RSP: 0000:ffff88042fd47f28 EFLAGS: 00010002 RAX: ffff88042c0a7fd8 RBX: 0000000000000001 RCX: 00000000c0000101 RDX: 00000000ffff8804 RSI: ffffffffffffffff RDI: ffff88042fd47f58 RBP: ffff88042fd47f48 R08: 0000000000000004 R09: 0000000000001484 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88042fd47f58 R13: 0000000000000000 R14: ffff88042fd47d98 R15: 0000000000000020 FS: 00007fca25e56700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000074 CR3: 000000042d28b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process opcontrol (pid: 8611, threadinfo ffff88042c0a6000, task ffff88042c532310) Stack: 0000000000000000 0000000000000001 ffff88042c0a7fd8 0000000000000000 ffff88042fd47de8 ffffffff813e897a 0000000000000020 ffff88042fd47d98 0000000000000000 ffff88042c0a7fd8 ffff88042fd47de8 0000000000000074 Call Trace: <NMI> [<ffffffff813e897a>] nmi+0x1a/0x20 [<ffffffff813f08ab>] ? bad_to_user+0x25/0x771 <<EOE>> Code: ff 59 5b 41 5c 41 5d c9 c3 55 65 48 8b 04 25 88 b5 00 00 48 89 e5 41 55 41 54 49 89 fc 53 48 83 ec 08 f6 80 47 e0 ff ff 04 74 04 <0f> 0b eb fe 81 80 44 e0 ff ff 00 00 01 04 65 ff 04 25 c4 0f 01 RIP [<ffffffff813e8e35>] do_nmi+0x22/0x1ee RSP <ffff88042fd47f28> ---[ end trace ed6752185092104b ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 8611, comm: opcontrol Tainted: G D 2.6.39-00007-gfe47ae7 #1 Call Trace: <NMI> [<ffffffff813e5e0a>] panic+0x8c/0x188 [<ffffffff813e915c>] oops_end+0x81/0x8e [<ffffffff8100403d>] die+0x55/0x5e [<ffffffff813e8c45>] do_trap+0x11c/0x12b [<ffffffff810023c8>] do_invalid_op+0x91/0x9a [<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee [<ffffffff8131e6fa>] ? oprofile_add_sample+0x83/0x95 [<ffffffff81321670>] ? op_amd_check_ctrs+0x4f/0x2cf [<ffffffff813ee4d5>] invalid_op+0x15/0x20 [<ffffffff813e8e35>] ? do_nmi+0x22/0x1ee [<ffffffff813e8e7a>] ? do_nmi+0x67/0x1ee [<ffffffff813e897a>] nmi+0x1a/0x20 [<ffffffff813f08ab>] ? bad_to_user+0x25/0x771 <<EOE>> Cc: John Lumby <johnlumby@hotmail.com> Cc: Maynard Johnson <maynardj@us.ibm.com> Cc: <stable@kernel.org> # .37+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-12x86: Remove warning and warning_symbol from struct stacktrace_opsRichard Weinberger
Both warning and warning_symbol are nowhere used. Let's get rid of them. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Soeren Sandmann Pedersen <ssp@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: x86 <x86@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Robert Richter <robert.richter@amd.com> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/1305205872-10321-2-git-send-email-richard@nod.at Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2011-03-18x86, dumpstack: Correct stack dump info when frame pointer is availableNamhyung Kim
Current stack dump code scans entire stack and check each entry contains a pointer to kernel code. If CONFIG_FRAME_POINTER=y it could mark whether the pointer is valid or not based on value of the frame pointer. Invalid entries could be preceded by '?' sign. However this was not going to happen because scan start point was always higher than the frame pointer so that they could not meet. Commit 9c0729dc8062 ("x86: Eliminate bp argument from the stack tracing routines") delayed bp acquisition point, so the bp was read in lower frame, thus all of the entries were marked invalid. This patch fixes this by reverting above commit while retaining stack_frame() helper as suggested by Frederic Weisbecker. End result looks like below: before: [ 3.508329] Call Trace: [ 3.508551] [<ffffffff814f35c9>] ? panic+0x91/0x199 [ 3.508662] [<ffffffff814f3739>] ? printk+0x68/0x6a [ 3.508770] [<ffffffff81a981b2>] ? mount_block_root+0x257/0x26e [ 3.508876] [<ffffffff81a9821f>] ? mount_root+0x56/0x5a [ 3.508975] [<ffffffff81a98393>] ? prepare_namespace+0x170/0x1a9 [ 3.509216] [<ffffffff81a9772b>] ? kernel_init+0x1d2/0x1e2 [ 3.509335] [<ffffffff81003894>] ? kernel_thread_helper+0x4/0x10 [ 3.509442] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.509542] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.509641] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 after: [ 3.522991] Call Trace: [ 3.523351] [<ffffffff814f35b9>] panic+0x91/0x199 [ 3.523468] [<ffffffff814f3729>] ? printk+0x68/0x6a [ 3.523576] [<ffffffff81a981b2>] mount_block_root+0x257/0x26e [ 3.523681] [<ffffffff81a9821f>] mount_root+0x56/0x5a [ 3.523780] [<ffffffff81a98393>] prepare_namespace+0x170/0x1a9 [ 3.523885] [<ffffffff81a9772b>] kernel_init+0x1d2/0x1e2 [ 3.523987] [<ffffffff81003894>] kernel_thread_helper+0x4/0x10 [ 3.524228] [<ffffffff814f6880>] ? restore_args+0x0/0x30 [ 3.524345] [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2 [ 3.524445] [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10 -v5: * fix build breakage with oprofile -v4: * use 0 instead of regs->bp * separate out printk changes -v3: * apply comment from Frederic * add a couple of printk fixes Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Soren Sandmann <ssp@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <1300416006-3163-1-git-send-email-namhyung@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18x86: Eliminate bp argument from the stack tracing routinesSoeren Sandmann Pedersen
The various stack tracing routines take a 'bp' argument in which the caller is supposed to provide the base pointer to use, or 0 if doesn't have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not defined, this means all callers in principle should either always pass 0, or be conditional on CONFIG_FRAME_POINTER. However, there are only really three use cases for stack tracing: (a) Trace the current task, including IRQ stack if any (b) Trace the current task, but skip IRQ stack (c) Trace some other task In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just be 0. If it _is_ defined, then - in case (a) bp should be gotten directly from the CPU's register, so the caller should pass NULL for regs, - in case (b) the caller should should pass the IRQ registers to dump_trace(), - in case (c) bp should be gotten from the top of the task's stack, so the caller should pass NULL for regs. Hence, the bp argument is not necessary because the combination of task and regs is sufficient to determine an appropriate value for bp. This patch introduces a new inline function stack_frame(task, regs) that computes the desired bp. This function is then called from the two versions of dump_stack(). Signed-off-by: Soren Sandmann <ssp@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org>, Cc: Frederic Weisbecker <fweisbec@gmail.com>, Cc: Arnaldo Carvalho de Melo <acme@redhat.com>, LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-10-01oprofile, x86: Adding backtrace dump for 32bit process in compat modeJiri Olsa
This patch implements the oprofile backtrace generation for 32 bit applications running in the 64bit environment (compat mode). With this change it's possible to get backtrace for 32bits applications under the 64bits environment using oprofile's callgraph options. opcontrol --setup -c ... opreport -l -cg ... Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01oprofile, x86: Using struct stack_frame for 64bit processes dumpJiri Olsa
Removing unnecessary struct frame_head and replacing it with struct stack_frame. The struct stack_frame is already defined and used in other places in kernel, so there's no reason to define new structure. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-12-17perf events, x86/stacktrace: Make stack walking optionalFrederic Weisbecker
The current print_context_stack helper that does the stack walking job is good for usual stacktraces as it walks through all the stack and reports even addresses that look unreliable, which is nice when we don't have frame pointers for example. But we have users like perf that only require reliable stacktraces, and those may want a more adapted stack walker, so lets make this function a callback in stacktrace_ops that users can tune for their needs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12x86, 32-bit: fix kernel_trap_sp()Masami Hiramatsu
Use &regs->sp instead of regs for getting the top of stack in kernel mode. (on x86-64, regs->sp always points the top of stack) [ Impact: Oprofile decodes only stack for backtracing on i386 ] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> [ v2: rename the API to kernel_stack_pointer(), move variable inside ] Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: systemtap@sources.redhat.com Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jan Blunck <jblunck@suse.de> Cc: Christoph Hellwig <hch@infradead.org> LKML-Reference: <20090511210300.17332.67549.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16oprofile: fixing whitespaces in arch/x86/oprofile/*Robert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-10-15oprofile: more whitespace fixesRobert Richter
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-01-30x86: rename stack_pointer to kernel_trap_spHarvey Harrison
Choose a less generic name for such a special case. Add a comment explaining the odd use in X86_32. Change the one user of stack_pointer. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: pull bp calculation earlier into the backtrace pathArjan van de Ven
Right now, we take the stack pointer early during the backtrace path, but only calculate bp several functions deep later, making it hard to reconcile the stack and bp backtraces (as well as showing several internal backtrace functions on the stack with bp based backtracing). This patch moves the bp taking to the same place we take the stack pointer; sadly this ripples through several layers of the back tracing stack, but it's not all that bad in the end I hope. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add the capability to print fuzzy backtracesArjan van de Ven
For enhancing the 32 bit EBP based backtracer, I need the capability for the backtracer to tell it's customer that an entry is either reliable or unreliable, and the backtrace printing code then needs to print the unreliable ones slightly different. This patch adds the basic capability, the next patch will add a user of this capability. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: rename the struct pt_regs members for 32/64-bit consistencyH. Peter Anvin
We have a lot of code which differs only by the naming of specific members of structures that contain registers. In order to enable additional unifications, this patch drops the e- or r- size prefix from the register names in struct pt_regs, and drops the x- prefixes for segment registers on the 32-bit side. This patch also performs the equivalent renames in some additional places that might be candidates for unification in the future. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-19x86: introduce frame_pointer() and stack_pointer()Jan Blunck
This patch defines frame_pointer() and stack_pointer() similar to the already defined instruction_pointer(). Thus the oprofile code can be written in a more readable fashion. [ tglx: arch/x86 adaptation ] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-19i386: make callgraph use dump_trace() on i386/x86_64Jan Blunck
This patch improves oprofile callgraphs for i386/x86_64. The old backtracing code was unable to produce kernel backtraces if the kernel wasn't compiled with framepointers. The code now uses dump_trace(). [ tglx: arch/x86 adaptation ] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11i386: move oprofileThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>