aboutsummaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2008-09-05sh64: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.Paul Mundt
Follows the SH change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-05sh: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y.Carmelo Amoroso
This patch fixes a problem within the SH implementation of resume_kernel code, that implements in assembly the bulk of preempt_schedule_irq function without taking care of the extra code needed to handle the BKL preemptible. The patch basically consists of removing this asm code and calling the common C implementation (see kernel/sched.c) as other archs do. Another change is the missing 'cli' macro invocation at the beginning of the resume_kernel. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: fix semtimedop syscallYoshihiro Shimoda
fix the problem that cannot work semtimedop system call. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: update AP325RXA defconfigMagnus Damm
This patch updates the AP325RXA defconfig to include the recently merged uio_pdrv_genirq driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: update Migo-R defconfigMagnus Damm
This patch updates the MigoR defconfig to include the recently merged uio_pdrv_genirq driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: fix platform_resource_setup_memory() section mismatchMagnus Damm
This patch kills a section mismatch for platform_resource_setup_memory(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: fix kexec entry point for crash kernelsMagnus Damm
The crash kernel entry point is currently checked by the kexec kernel code and only physical addresses in the reserved memory window are accepted. This means that we can't pass P2 or P1 addresses as entry points in the case of crash kernels. This patch makes sure we can start crash kernels by adding support for physical address entry points. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-28sh: crash kernel resource fixMagnus Damm
The reserved crash kernel memory range is currently missing from /proc/iomem. crashk_res is mistakenly setup after __add_active_range(). Reorder things to make sure the resource shows up in /proc/iomem. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-25sh: fix ptrace_64.c:user_disable_single_step()Adrian Bunk
This patch fixes the following compile error caused by commit c459dbf294b4a3d70490a468a7ca3907fb2c2f57 (sh: ptrace single stepping cleanups.): <-- snip --> ... CC arch/sh/kernel/ptrace_64.o arch/sh/kernel/ptrace_64.c: In function 'user_disable_single_step': arch/sh/kernel/ptrace_64.c:134: error: 'regs' undeclared (first use in this function) arch/sh/kernel/ptrace_64.c:134: error: (Each undeclared identifier is reported only once arch/sh/kernel/ptrace_64.c:134: error: for each function it appears in.) ... make[2]: *** [arch/sh/kernel/ptrace_64.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-25sh64: re-add the __strnlen_user() prototypeAdrian Bunk
Commit 42fd3b142d8867f5b58d6fb75592cd20fd654c1b (sh: Initial consolidation of the _32/_64 uaccess split.) mistakenly removed the sh64 __strnlen_user() prototype, resulting in the following compile error: <-- snip --> ... CC init/main.o In file included from include/linux/poll.h:13, from include/linux/rtc.h:113, from include/linux/efi.h:19, from init/main.c:43: arch/sh/include/asm/uaccess.h: In function 'strnlen_user': arch/sh/include/asm/uaccess.h:213: error: implicit declaration of function '__strnlen_user' ... make[2]: *** [init/main.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-20Merge branch 'sh/for-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Provide a FLAT_PLAT_INIT() definition. binfmt_flat: Stub in a FLAT_PLAT_INIT(). video: export sh_mobile_lcdc panel size sh: select memchunk size using kernel cmdline sh: export sh7723 VEU as VEU2H input: migor_ts compile and detection fix sh: remove MSTPCR defines from Migo-R header file sh: Update sh7763rdp defconfig sh: Add support sh7760fb to sh7763rdp board sh: Add support sh_eth to sh7763rdp board sh: Disable 64kB hugetlbpage size when using 64kB PAGE_SIZE. sh: Don't export __{s,u}divsi3_i4i from SH-2 libgcc. fix SH7705_CACHE_32KB compilation sh: mach-x3proto: Fix up smc91x platform data.
2008-08-15kexec jump: rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZEHuang Ying
Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control page is used for not only code on some platform. For example in kexec jump, it is used for data and stack too. [akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion] Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-11sh: Provide a FLAT_PLAT_INIT() definition.Takashi YOSHII
SH needs this in order to make sure that r4 has a sane value at process entry time, which the libc expects has already been taken care of. Fixes random crashes in flat binaries. Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11video: export sh_mobile_lcdc panel sizeMagnus Damm
Export the LCD panel size for sh_mobile_lcdc boards. This allows us to perform dpi and screen aspect ratio calculations in user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: select memchunk size using kernel cmdlineMagnus Damm
Allow user to pass parameters on kernel command line to override default size for physically contiguous memory buffers. The default VPU buffer size is too small for VGA harware encoding, but instead of just bumping up the number we allow the user to override the default size using the command line. Supports SuperH Mobile hardware blocks such as VEU, VPU and CEU. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: export sh7723 VEU as VEU2HMagnus Damm
Export sh7723 VEU hardware blocks as VEU2H. The sh7723 VEU2H differs a bit from the sh7722 VEU so use different names for our UIO devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: remove MSTPCR defines from Migo-R header fileMagnus Damm
Remove MSTPCR register definitions from Migo-R header file. The clock frame work should be used instead of direct register access. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Update sh7763rdp defconfigNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Add support sh7760fb to sh7763rdp boardNobuhiro Iwamatsu
Add sh7760fb platform device to sh7763rdp's setup. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Add support sh_eth to sh7763rdp boardNobuhiro Iwamatsu
SH7763 has sh_eth device. This patch add sh_eth platform device to this board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Disable 64kB hugetlbpage size when using 64kB PAGE_SIZE.Paul Mundt
Presently we oops in mm/hugetlb.c:1325, which is the order == 0 test in hugetlb_add_hstate() called at initialization time. So, disable 64kB huge pages when we're using a 64kB PAGE_SIZE. On most parts this will force the default to be 1MB huge pages. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: Don't export __{s,u}divsi3_i4i from SH-2 libgcc.Yoshinori Sato
rsk7203_defconfig fails to build with the following error: <-- snip --> ... LD .tmp_vmlinux1 arch/sh/kernel/built-in.o:(__ksymtab+0xb8): undefined reference to `__udivsi3_i4i' arch/sh/kernel/built-in.o:(__ksymtab+0xc8): undefined reference to `__sdivsi3_i4i' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> That worked with 2.6.26, and these are far less undefined references than in the cases where libgcc was missing. [ These symbols are not defined on SH-2 versions of libgcc, so we have to special case the export there. - Paul ] Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11fix SH7705_CACHE_32KB compilationAdrian Bunk
This patches compile errors like the following caused by commit 51f3547d619956e9b428bfff17004d8f4d259a02 (sh: Allow SH-3 and SH-5 to use common headers): <-- snip --> ... CC arch/sh/mm/init.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/init.c: In function 'mem_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/init.c:232: error: implicit declaration of function 'p3_cache_init' make[2]: *** [arch/sh/mm/init.o] Error 1 make[1]: *** [arch/sh/mm] Error 2 ... CC kernel/fork.o /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c: In function 'dup_mmap': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c:323: error: implicit declaration of function 'flush_dcache_mmap_lock' /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c:325: error: implicit declaration of function 'flush_dcache_mmap_unlock' make[2]: *** [kernel/fork.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11sh: mach-x3proto: Fix up smc91x platform data.Paul Mundt
smc91x on x3proto needs 16-bit access and nowait, which we can now do through the platform data. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-07[netdrvr] sh_eth: Add SH7619 supportYoshinori Sato
Add support SH7619 Internal ethernet controler. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-05remove unneeded #include <linux/ide.h>'sAdrian Bunk
This patch remove unneeded #include <linux/ide.h>'s. It also adds a required #include <linux/interrupt.h> that was previously implicitely pulled by ide.h Signed-off-by: Adrian Bunk <bunk@kernel.org> [bart: revert change to tests/lkdtm.c (spotted by Stephen Rothwell)] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05remove unnecessary <linux/hdreg.h> includesBartlomiej Zolnierkiewicz
Following files don't need <linux/hdreg.h> at all: - arch/mips/jazz/setup.c - arch/sh/boards/mach-systemh/irq.c - drivers/macintosh/mediabay.c - drivers/scsi/hptiop.c - drivers/usb/storage/freecom.c - arch/powerpc/include/asm/ide.h - init/main.c Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-04sh: enable maple_keyb in dreamcast_defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04SH2(A) cache updateYoshinori Sato
Includes: - SH2 (7619) Writeback support. - SH2A cache handling fix. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04add addrespace definition for sh2a.Takashi Yoshii
Newfile: arch/sh/include/cpu-sh2a/cpu/addrspace.h This file seems had be removed to use fallback (cpu-common/cpu/addrspace.h), but, I'd like to add sh2a specific file here, because 1. the values defined there are not suitable for sh2a. 2. I don't think there is "common" definition for these values. Values are chosen by consideration of followings... P1 is 0. perhaps no question. P2 is from hardware manual, which says no-cache area starts at 20000000. It means that P? space size=20000000. P3 is P2+size since asm/ptrace.h uses P3 as a end of P2. P4 is P3+size since asm/fixup.h uses P4 as a end of P3. Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Kill off ARCH_SUPPORTS_AOUT and remnants of a.out support.Paul Mundt
SH never really supported a.out, so this was all just copied over blindly from x86 way back when. As we don't reference linux/a.out.h anywhere in the tree, these can now safely be killed off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: define GENERIC_HARDIRQS_NO__DO_IRQ.Paul Mundt
We haven't called in to __do_IRQ() in a long time, so it seems like a reasonable time to switch this on by default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: define GENERIC_LOCKBREAK.Paul Mundt
Needed for fixing up the __raw_spin_is_contended() reference which results in a build error. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Save NUMA node data in vmcore for crash dumps.Paul Mundt
Presently the NUMA node data isn't saved on kexec. This implements a simple arch_crash_save_vmcoreinfo() for saving off the relevant data. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: module_alloc() should be using vmalloc_exec().Paul Mundt
SH-X2 extended mode TLB allows for toggling of the exec bit, so make sure we are using the right protection bits for module space there also. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Fix up __bug_table handling in module loader.Paul Mundt
We should be calling in to the lib/bug.c module helpers, fix that up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: Fix up broken kerneldoc comments.Paul Mundt
These were completely unparseable, so fix them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04sh: /proc/asids depends on MMU.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-03arch/sh/boards/mach-se/7343/irq.c: removed duplicated #includeHuang Weiyi
Removed duplicated include <linux/irq.h> in arch/sh/boards/mach-se/7343/irq.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-03arch/sh/boards/board-ap325rxa.c: removed duplicated #includeHuang Weiyi
Removed duplicated include <linux/delay.h> in arch/sh/boards/board-ap325rxa.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-03sh/boards/Makefile typo fixAdrian Bunk
The following build error was caused by an obvious typo: <-- snip --> ... LD arch/sh/mm/built-in.o make[2]: *** No rule to make target `arch/sh/boards/board-shmin..o', needed by `arch/sh/boards/built-in.o'. Stop. <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: fix LIBGCCAdrian Bunk
Commit f15cbe6f1a4b4d9df59142fc8e4abb973302cf44 (sh: migrate to arch/sh/include/) moved KBUILD_CFLAGS (which is used by LIBGCC) below LIBGCC, causing build errors like the following: <-- snip --> ... LD .tmp_vmlinux1 arch/sh/kernel/built-in.o: In function `module_clk_recalc': clock-sh4.c:(.text+0x80f0): undefined reference to `__udivsi3_i4i' ... make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Revert the location change of auto-generated asm/machtypes.hPaul Mundt
This ended up causing build breakage on O= builds, as reported by Adrian: <-- snip --> ... CC init/main.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19, from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27: error: asm/machtypes.h: No such file or directory make[2]: *** [init/main.o] Error 1 <-- snip --> So we simply move machtypes.h back to its original place. asm-offsets.h is still generated there regardless, until such a time that we find a better place to stash auto-generated files. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Fix up the audit arch endian specification.Paul Mundt
Presently this was always being set to AUDIT_ARCH_SH, which assumes big endian. Fix this up so that the architecture actually reflects what we're running on. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.Paul Mundt
This follows the changes in commits: 7d6d637dac2050f30a1b57b0a3dc5de4a10616ba 4f72c4279eab1e5f3ed1ac4e55d4527617582392 on powerpc. Adding in TIF_NOTIFY_RESUME, and cleaning up the syscall tracing to be more generic. This is an incremental step to turning on tracehook, as well as unifying more of the ptrace and signal code across the 32/64 split. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: ptrace single stepping cleanups.Paul Mundt
This converts the single stepping done by sh/sh64 ptrace implementations to use the generic user_enable/disable_single_step(), and subsequently rips out a lot of ptrace request cases that are now handled generically. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: seccomp support.Paul Mundt
This hooks up the seccomp thread flag and associated callback from the syscall tracer. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Tidy up the _TIF work masks, and fix syscall trace bug on singlestep.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02kdump: sh: parse elfcorehdr command line argumentSimon Horman
A quick cut and paste from other architectures to allow SH to parse the elfcorehdr command line argument which is required for both is_kdump_kernel() and vmcore to function. (the former is as yet unused on SH). Tested compilation only Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits) mm/hugetlb.c must #include <asm/io.h> video: Fix up hp6xx driver build regressions. sh: defconfig updates. sh: Kill off stray mach-rsk7203 reference. serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression. sh: Move out individual boards without mach groups. sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h. sh: Allow SH-3 and SH-5 to use common headers. sh: Provide common CPU headers, prune the SH-2 and SH-2A directories. sh/maple: clean maple bus code sh: More header path fixups for mach dir refactoring. sh: Move out the solution engine headers to arch/sh/include/mach-se/ sh: I2C fix for AP325RXA and Migo-R sh: Shuffle the board directories in to mach groups. sh: dma-sh: Fix up dreamcast dma.h mach path. sh: Switch KBUILD_DEFCONFIG to shx3_defconfig. sh: Add ARCH_DEFCONFIG entries for sh and sh64. sh: Fix compile error of Solution Engine sh: Proper __put_user_asm() size mismatch fix. sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation. ...