aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/Kconfig
AgeCommit message (Collapse)Author
2013-11-21Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-androidMark Brown
2013-11-21Merge remote-tracking branch 'lsk/v3.10/topic/big.LITTLE' into linux-linaro-lskMark Brown
2013-11-21sched: hmp: add read-only hmp domain sysfs fileChris Redpath
In order to allow userspace to restrict known low-load tasks to little CPUs, we must export this knowledge from the kernel or expect userspace to make their own attempts at figuring it out. Since we now have a userspace requirement for an HMP implementation to always have at least some sysfs files, change the integration so that it only depends upon CONFIG_SCHED_HMP rather than CONFIG_HMP_VARIABLE_SCALE. Fix Kconfig text to match. Signed-off-by: Chris Redpath <chris.redpath@arm.com> Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-10-11Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-androidMark Brown
2013-10-11Merge remote-tracking branch 'lsk/v3.10/topic/big.LITTLE' into linux-linaro-lskMark Brown
2013-10-11HMP: Implement task packing for small tasks in HMP systemsChris Redpath
If we wake up a task on a little CPU, fill CPUs rather than spread. Adds 2 new files to sys/kernel/hmp to control packing behaviour. packing_enable: task packing enabled (1) or disabled (0) packing_limit: Runqueues will be filled up to this load ratio. This functionality is disabled by default on TC2 as it lacks per-cpu power gating so packing small tasks there doesn't make sense. Signed-off-by: Chris Redpath <chris.redpath@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Jon Medhurst <tixy@linaro.org>
2013-08-15Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-androidMark Brown
Conflicts (the ARM security fixes vs the read only kernel changes from Google): arch/arm/mm/mmu.c
2013-08-15Merge tag 'v3.10.7' into linux-linaro-lskMark Brown
This is the 3.10.7 stable release
2013-08-11ARM: 7791/1: a.out: remove partial a.out supportWill Deacon
commit acfdd4b1f7590d02e9bae3b73bdbbc4a31b05d38 upstream. a.out support on ARM requires that argc, argv and envp are passed in r0-r2 respectively, which requires hacking load_aout_binary to prevent argc being clobbered by the return code. Whilst mainline kernels do set the registers up in start_thread, the aout loader has never carried the hack in mainline. Initialising the registers in this way actually goes against the libc expectations for ELF binaries, where argc, argv and envp are passed on the stack, with r0 being used to hold a pointer to an exit function for cleaning up after the dynamic linker if required. If the pointer is NULL, then it is ignored. When execing an ELF binary, Linux currently zeroes r0, then sets it to argc and then finally clobbers it with the return value of the execve syscall, so we actually end up with: r0 = 0 stack[0] = argc r1 = stack[1] = argv r2 = stack[2] = envp libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve works for user-spawned threads, but when executing an ELF binary from a kernel thread (via call_usermodehelper), the execve is performed on the ret_from_fork path, which restores r0 from the saved pt_regs, resulting in argc being presented to the C library. This has horrible consequences when the application exits, since we have an exit function registered using argc, resulting in a jump to hyperspace. This patch solves the problem by removing the partial a.out support from arch/arm/ altogether. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11ARM: move vector stubsRussell King
commit 19accfd373847ac3d10623c5d20f948846299741 upstream. Move the machine vector stubs into the page above the vector page, which we can prevent from being visible to userspace. Also move the reset stub, and place the swi vector at a location that the 'ldr' can get to it. This hides pointers into the kernel which could give valuable information to attackers, and reduces the number of exploitable instructions at a fixed address. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11Merge remote-tracking branch 'lsk/v3.10/topic/android-fixes' into ↵Mark Brown
linux-linaro-lsk-android
2013-07-19Merge branch 'experimental/android-3.10' of ↵Mark Brown
https://android.googlesource.com/kernel/common into linux-linaro-lsk-android Conflicts: arch/arm/include/asm/smp.h arch/arm/kernel/smp.c kernel/futex.c
2013-07-18Merge remote-tracking branch 'lsk/v3.10/topic/big.LITTLE' into linux-linaro-lskMark Brown
2013-07-17Merge branch 'iks' of git://git.linaro.org/people/nico/linux into lsk-v3.10-ikstopic/v3.10/iksMark Brown
2013-07-17Revert "sched: Enable HMP priority filter by default"Chris Redpath
This reverts commit 68315334e32932739145ddb41a46cc86b8b056b3. Having the priority filter enabled prevents proper operation on Android systems where a wider range of priorities are used by userspace to partition types of tasks. Those tasks should still be able to benefit from the use of big CPUs when required. Signed-off-by: Chris Redpath <chris.redpath@arm.com>
2013-07-17ARM: Experimental Frequency-Invariant Load Scaling PatchChris Redpath
Evaluation Patch to investigate using load as a representation of the amount of POTENTIAL cpu compute capacity used rather than a representation of the CURRENT cpu compute capacity. If CPUFreq is enabled, scales load in accordance with frequency. Powersave/performance CPUFreq governors are detected and scaling is disabled while these governors are in use. This is because when a single-frequency governor is in use, potential CPU capacity is static. So long as the governors and CPUFreq subsystem correctly report the frequencies available, the scaling should self tune. Adds an additional file to sysfs to allow this feature to be disabled for experimentation. /sys/kernel/hmp/frequency_invariant_load_scale write 0 to disable, 1 to enable. Signed-off-by: Chris Redpath <chris.redpath@arm.com>
2013-07-17ARM: Change load tracking scale using sysfsOlivier Cozette
These functions allow to change the load average period used in the task load average computation through /sys/kernel/hmp/load_avg_period_ms. This period is the time in ms to go from 0 to 0.5 load average while running or the time from 1 to 0.5 while sleeping. The default one used is 32 and gives the same load_avg_ratio computation than without this patch. These functions also allow to change the up and down threshold of HMP using /sys/kernel/hmp/{up,down}_threshold. Both must be between 0 and 1024. The thresholds are divided by 1024 before being compared to the load_avg_ratio. If /sys/kernel/hmp/load_avg_period_ms is 128 and /sys/kernel/hmp/up_threshold is 512, a task will be migrated to a bigger cluster after running for 128ms. Because after load_avg_period_ms the load average is 0.5 and real up_threshold us 512 / 1024 = 0.5. Signed-off-by: Olivier Cozette <olivier.cozette@arm.com> Signed-off-by: Chris Redpath <chris.redpath@arm.com>
2013-07-17sched: Enable HMP priority filter by defaultMorten Rasmussen
This updates the ARM Kconfig to enable the HMP priority filter by default. Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
2013-07-17ARM: sched: Use device-tree to provide fast/slow CPU list for HMPMorten Rasmussen
We can't rely on Kconfig options to set the fast and slow CPU lists for HMP scheduling if we want a single kernel binary to support multiple devices with different CPU topology. E.g. TC2 (ARM's Test-Chip-2 big.LITTLE system), Fast Models, or even non big.LITTLE devices. This patch adds the function arch_get_fast_and_slow_cpus() to generate the lists at run-time by parsing the CPU nodes in device-tree; it assumes slow cores are A7s and everything else is fast. The function still supports the old Kconfig options as this is useful for testing the HMP scheduler on devices without big.LITTLE. This patch is reuse of a patch by Jon Medhurst <tixy@linaro.org> with a few bits left out. Signed-off-by: Morten Rasmussen <Morten.Rasmussen@arm.com>
2013-07-17ARM: Add HMP scheduling support for ARM architectureMorten Rasmussen
Adds Kconfig entries to enable HMP scheduling on ARM platforms. Currently, it disables CPU level sched_domain load-balacing in order to simplify things. This needs fixing in a later revision. HMP scheduling will do the load-balancing at this level instead. Signed-off-by: Morten Rasmussen <Morten.Rasmussen@arm.com>
2013-07-17sched: Introduce priority-based task migration filterMorten Rasmussen
Introduces a priority threshold which prevents low priority task from migrating to faster hmp_domains (cpus). This is useful for user-space software which assigns lower task priority to background task. Signed-off-by: Morten Rasmussen <Morten.Rasmussen@arm.com>
2013-07-17sched: Task placement for heterogeneous systems based on task load-trackingMorten Rasmussen
This patch introduces the basic SCHED_HMP infrastructure. Each class of cpus is represented by a hmp_domain and tasks will only be moved between these domains when their load profiles suggest it is beneficial. SCHED_HMP relies heavily on the task load-tracking introduced in Paul Turners fair group scheduling patch set: <https://lkml.org/lkml/2012/8/23/267> SCHED_HMP requires that the platform implements arch_get_hmp_domains() which should set up the platform specific list of hmp_domains. It is also assumed that the platform disables SD_LOAD_BALANCE for the appropriate sched_domains. Tasks placement takes place every time a task is to be inserted into a runqueue based on its load history. The task placement decision is based on load thresholds. There are no restrictions on the number of hmp_domains, however, multiple (>2) has not been tested and the up/down migration policy is rather simple. Signed-off-by: Morten Rasmussen <Morten.Rasmussen@arm.com>
2013-07-02Revert "ARM: convert build of appended dtb zImage to list of dtbs"John Stultz
This reverts commit 5e9468632ea81e7d17fc9bd4457acbaffda7b370. Tixy was seeing trouble with "make dtbs" and "make my-boards.dtb", and found reverting this resolves the issue. So for now lets revert this. Reported-by: Jon Medhurst (Tixy) <tixy@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-07-01ARM: convert build of appended dtb zImage to list of dtbsColin Cross
Allow CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES to specify a space separated list of dtbs to append to the zImage, and name the resulting file zImage-dtb Change-Id: I36d9108a2349bdbb373e95076dcb1417d8c7dce6 Signed-off-by: Colin Cross <ccross@android.com> Conflicts: arch/arm/boot/Makefile scripts/Makefile.lib
2013-07-01ARM: add config option to build zImage/dtb comboErik Gilling
Allows a defconfig to set a default dtb to concatenate with a zImage to create a zImage-dtb.<dtb name> Signed-off-by: Erik Gilling <konkers@android.com> Change-Id: I34b643b1c49228fbae88a56e46c93c478089620d
2013-07-01ARM: add option to flush console before rebootDima Zavin
If the console_lock was held while the system was rebooted, the messages in the temporary logbuffer would not have propogated to all the console drivers. This force releases the console lock if it failed to be acquired. Change-Id: I193dcf7b968be17966833e50b8b8bc70d5d9fe89 Signed-off-by: Dima Zavin <dima@android.com>
2013-06-24ARM: 7773/1: PJ4B: Add support for errata 4742Gregory CLEMENT
This commit fixes the regression on Armada 370 (the kernal hang during boot) introduced by the commit: "ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead". When coming out of either a Wait for Interrupt (WFI) or a Wait for Event (WFE) IDLE states, a specific timing sensitivity exists between the retiring WFI/WFE instructions and the newly issued subsequent instructions. This sensitivity can result in a CPU hang scenario. The workaround is to insert either a Data Synchronization Barrier (DSB) or Data Memory Barrier (DMB) command immediately after the WFI/WFE instruction. This commit was based on the work of Lior Amsalem, but heavily modified to apply the errata fix dynamically according to the processor type thanks to the suggestions of Russell King and Nicolas Pitre. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Willy Tarreau <w@1wt.eu> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-19ARM: bL_switcher: add a simple /dev user interface for debugging purposesNicolas Pitre
Only the basic to aid debugging. Usage: echo <cpuid>,<clusterid> > /dev/b.L_switcher where <cpuid> is between 0 and 3, and <clusterid> is 0 for the A15 cluster and 1 for the A7 cluster. Signed-off-by: nicolas Pitre <nico@linaro.org>
2013-06-19ARM: b.L: core switcher codeNicolas Pitre
This is the core code implementing big.LITTLE switcher functionality. Rational for this code is available here: http://lwn.net/Articles/481055/ The main entry point for a switch request is: void bL_switch_request(unsigned int cpu, unsigned int new_cluster_id) If the calling CPU is not the wanted one, this wrapper takes care of sending the request to the appropriate CPU with schedule_work_on(). In the future, some switching related tasks which do not require a strict CPU affinity might be moved here though. At the moment the core switch operation is handled by bL_switch_to() which must be called on the CPU for which a switch is requested. What this code does: * Return early if the current cluster is the wanted one. * Close the gate in the kernel entry vector for both the inbound and outbound CPUs. * Wake up the inbound CPU so it can perform its reset sequence in parallel up to the kernel entry vector gate. * Migrate all interrupts in the GIC targeting the outbound CPU interface to the inbound CPU interface, including SGIs. This is performed by gic_migrate_target() in arch/arm/common/gic.c. * Call cpu_pm_enter() which takes care of flushing the VFP state to RAM and save the CPU interface config from the GIC to RAM. * Call cpu_suspend() which saves the CPU state (general purpose registers, page table address) onto the stack and store the resulting stack pointer in an array indexed by processor number, then call the provided shutdown function. This happens in arch/arm/kernel/sleep.S. At this point, the provided shutdown function executed by the outbound CPU ungates the inbound CPU. Therefore the inbound CPU: * Picks up the saved stack pointer in the array indexed by processor number above. At the moment the corresponding code in arch/arm/kernel/sleep.S only looks at the CPU number field in the MPIDR so the current code works unmodified even if the new CPU comes from a different cluster. * The MMU and caches are re-enabled using the saved state on the provided stack, just like if this was a resume operation from a suspended state. * Then cpu_suspend() returns, although this is on the inbound CPU rather than the outbound CPU which called it initially. * The function cpu_pm_exit() is called which effect is to restore the CPU interface state in the GIC using the state previously saved by the outbound CPU. * Exit of bL_switch_to() to resume normal kernel execution on the new CPU. However, the outbound CPU is potentially still running in parallel while the inbound CPU is resuming normal kernel execution, hence we need per CPU stack isolation to execute bL_do_switch(). After the outbound CPU has ungated the inbound CPU, it calls bL_cpu_power_down() to: * Clean its L1 cache. * If it is the last CPU still alive in its cluster (last man standing), it also cleans its L2 cache and disables cache snooping from the other cluster. Code called from bL_do_switch() might end up referencing 'current' for some reasons. However, 'current' is derived from the stack pointer. With any arbitrary stack, the returned value for 'current' and any dereferenced values through it are just random garbage which may lead to segmentation faults. The active page table during the execution of bL_do_switch() is also a problem. There is no guarantee that the inbound CPU won't destroy the corresponding task which would free the attached page table while the outbound CPU is still running and relying on it. To solve both issues, we borrow some of the task space belonging to the init/idle task which, by its nature, is lightly used and therefore is unlikely to clash with our usage. The init task is also never going away. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-06-17ARM: 7759/1: decouple CPU offlining from reboot/shutdownStephen Warren
Add comments to machine_shutdown()/halt()/power_off()/restart() that describe their purpose and/or requirements re: CPUs being active/not. In machine_shutdown(), replace the call to smp_send_stop() with a call to disable_nonboot_cpus(). This completely disables all but one CPU, thus satisfying the requirement that only a single CPU be active for kexec. Adjust Kconfig dependencies for this change. In machine_halt()/power_off()/restart(), call smp_send_stop() directly, rather than via machine_shutdown(); these functions don't need to completely de-activate all CPUs using hotplug, but rather just quiesce them. Remove smp_kill_cpus(), and its call from smp_send_stop(). smp_kill_cpus() was indirectly calling smp_ops.cpu_kill() without calling smp_ops.cpu_die() on the target CPUs first. At least some implementations of smp_ops had issues with this; it caused cpu_kill() to hang on Tegra, for example. Since smp_send_stop() is only used for shutdown, halt, and power-off, there is no need to attempt any kind of CPU hotplug here. Adjust Kconfig to reflect that machine_shutdown() (and hence kexec) relies upon disable_nonboot_cpus(). However, this alone doesn't guarantee that hotplug will work, or even that hotplug is implemented for a particular piece of HW that a multi-platform zImage runs on. Hence, add error-checking to machine_kexec() to determine whether it did work. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Zhangfei Gao <zhangfei.gao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-17ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrectJon Medhurst
On Cortex-A9 before version r1p0, the LoUIS bit field of the CLIDR register returns zero when it should return one. This leads to cache maintenance operations which rely on this value to not function as intended, causing data corruption. The workaround for this errata is to detect affected CPUs and correct the LoUIS value read. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-15Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A small number of fixes for stuff from the last merge window, and in one case (IRQ time accounting) the previous merge window." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4 ARM: finally enable IRQ time accounting config
2013-05-09Merge branch 'late/fixes' into fixesOlof Johansson
* late/fixes: ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP ARM: ux500: always select ABX500_CORE ARM: SIRF: select SMP_ON_UP only on SMP builds ARM: SPEAr: conditionalize l2x0 support ARM: imx: build CPU suspend code only when needed ARM: OMAP: build SMP code only for OMAP4/5 ARM: tegra: Tegra114 needs CPU_FREQ_TABLE ARM: default machine descriptor for multiplatform Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-07Merge tag '3.9-rc3-smp-6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen Pull ARM Xen SMP updates from Stefano Stabellini: "This contains a bunch of Xen/ARM specific changes, including some fixes, SMP support for Xen on ARM, and moving the xenvm machine from mach-vexpress to mach-virt. The non-Xen files that are touched are arch/arm/Kconfig, to select ARM_PSCI on XEN, and arch/arm/boot/dts/Makefile, to build the xenvm DTB if CONFIG_ARCH_VIRT. Highlights: - Move xenvm to mach-virt. - Implement SMP support in Xen on ARM. - Add support for machine reboot and power off via Xen hypercalls" * tag '3.9-rc3-smp-6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen: xen/arm: remove duplicated include from enlighten.c xen/arm: use sched_op hypercalls for machine reboot and power off xenvm: add a simple PSCI node and a second cpu xen/arm: XEN selects ARM_PSCI xen: move the xenvm machine to mach-virt xen/arm: SMP support xen/arm: implement HYPERVISOR_vcpu_op xen/arm: actually pass a non-NULL percpu pointer to request_percpu_irq
2013-05-07Merge tag 'cleanup-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
2013-05-07Merge tag 'soc-for-linus-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
2013-05-07Merge tag 'soc-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 2) from Arnd Bergmann: "These patches are all for Renesas shmobile, and depend on the earlier pinctrl updates. Remarkably, this adds support for three new SoCs: r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is for pinctrl (using the new subsystem) and for clocks (not yet using the common clock subsystem). The latter will have to get converted in one of the upcoming releases, but shmobile is not ready for that yet. The series also contains Renesas shmobile board changes, adding one board file for each of the three new SoCs. These boards are using a mix of classic and device-tree based probing, as there is still a lot of infrastructure in shmobile that has not been converted to DT yet. Once those are resolved to the degree that no board specific setup code is needed, they can get folded into the respective SoC setup files." * tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: shmobile: use r8a7790 timer setup code on Lager ARM: shmobile: force enable of r8a7790 arch timer ARM: shmobile: Add second I/O range for r8a7790 PFC ARM: shmobile: bockw: enable network settings on bootargs ARM: shmobile: bockw: add SMSC ethernet support ARM: shmobile: R8A7778: add Ether support ARM: shmobile: bockw: enable SMSC ethernet on defconfig ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin() ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO() ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection ARM: shmobile: mackerel: add interrupt names for SDHI0 ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio ARM: shmobile: mackerel: remove OCR masks, where regulators are used ARM: shmobile: mackerel: SDHI resources do not have to be numbered ARM: shmobile: Initial r8a7790 Lager board support ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support ARM: shmobile: APE6EVM base support ARM: shmobile: kzm9g-reference: add ethernet support ARM: shmobile: add R-Car M1A Bock-W platform support ...
2013-05-07ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4Sebastian Hesselbarth
The CPU used in Marvell Dove SoCs is a PJ4 Sheeva core. Using CONFIG_CPU_PJ4 instead of CONFIG_CPU_V7 will enable iWMMXt extensions on Dove. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-06Merge branch 'late/clksrc' into late/cleanupArnd Bergmann
There is no reason to keep the clksrc cleanups separate from the other cleanups, and this resolves some merge conflicts. Conflicts: arch/arm/mach-spear/spear13xx.c drivers/irqchip/Makefile
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-05-04ARM: finally enable IRQ time accounting configRussell King
We've had IRQ time accounting for the last six months, except for the Kconfig symbol. This somehow got missed out of the original patch. Add this now. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "The major items included in here are: - MCPM, multi-cluster power management, part of the infrastructure required for ARMs big.LITTLE support. - A rework of the ARM KVM code to allow re-use by ARM64. - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes of that stuff for arch/arm - Preparatory patches for Cortex-M3 support from Uwe Kleine-König. There is also a set of three patches in here from Hugh/Catalin to address freeing of inappropriate page tables on LPAE. You already have these from akpm, but they were already part of my tree at the time he sent them, so unfortunately they'll end up with duplicate commits" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE() ARM: IMX: remove unnecessary use of IS_ERR_VALUE() ARM: OMAP: use consistent error checking ARM: cleanup: OMAP hwmod error checking ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels ARM: 7700/2: Make cpu_init() notrace ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE ARM: 7701/1: mm: Allow arch code to control the user page table ceiling ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum() ARM: mcpm: provide an interface to set the SMP ops at run time ARM: mcpm: generic SMP secondary bringup and hotplug support ARM: mcpm_head.S: vlock-based first man election ARM: mcpm: Add baremetal voting mutexes ARM: mcpm: introduce helpers for platform coherency exit/setup ARM: mcpm: introduce the CPU/cluster power API ARM: multi-cluster PM: secondary kernel entry code ARM: cacheflush: add synchronization helpers for mixed cache state accesses ARM: cpu hotplug: remove majority of cache flushing from platforms ARM: smp: flush L1 cache in cpu_die() ARM: tegra: remove tegra specific cpu_disable() ...
2013-05-02Merge branches 'devel-stable', 'entry', 'fixes', 'mach-types', 'misc' and ↵Russell King
'smp-hotplug' into for-linus
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-05-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "This branch contains part 1 of the platform updates for 3.10. Among the highlights: - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3) - New support for CSR SiRFatlas6 SoCs - A handful of updates for NVidia T114 (a.k.a. Tegra 4) - A bunch of updates for the shmobile platforms - A handful of updates for davinci - A few updates for Qualcomm MSM - Plus a handful of other patches, defconfig updates, etc." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits) ARM: tegra: pm: fix build error w/o PM_SLEEP ARM: davinci: ensure global variables are declared ARM: davinci: sram.c: fix incorrect type in assignment ARM: davinci: da8xx dt: make file local symbols static ARM: davinci: da8xx: add remoteproc support ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries ARM: socfpga: Add clock entries into device tree ARM: socfpga: Enable soft reset ARM: EXYNOS: replace cpumask by the corresponding macro ARM: EXYNOS: handle properly the return values ARM: EXYNOS: factor out the idle states ARM: OMAP4: Enable fix for Cortex-A9 erratas ARM: OMAP2+: Export SoC information to userspace ARM: OMAP2+: SoC name and revision unification ARM: OMAP2+: Move common part of late init into common function ARM: tegra: pm: remove duplicated include from pm.c ARM: davinci: da850: override mmc DT node device name ARM: davinci: da850: add mmc DT entries mmc: davinci_mmc: add DT support ARM: SAMSUNG: check processor type before cache restoration in resume ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-30Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug changes from Ingo Molnar: "This is a pretty large, multi-arch series unifying and generalizing the various disjunct pieces of idle routines that architectures have historically copied from each other and have grown in random, wildly inconsistent and sometimes buggy directions: 101 files changed, 455 insertions(+), 1328 deletions(-) this went through a number of review and test iterations before it was committed, it was tested on various architectures, was exposed to linux-next for quite some time - nevertheless it might cause problems on architectures that don't read the mailing lists and don't regularly test linux-next. This cat herding excercise was motivated by the -rt kernel, and was brought to you by Thomas "the Whip" Gleixner." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) idle: Remove GENERIC_IDLE_LOOP config switch um: Use generic idle loop ia64: Make sure interrupts enabled when we "safe_halt()" sparc: Use generic idle loop idle: Remove unused ARCH_HAS_DEFAULT_IDLE bfin: Fix typo in arch_cpu_idle() xtensa: Use generic idle loop x86: Use generic idle loop unicore: Use generic idle loop tile: Use generic idle loop tile: Enter idle with preemption disabled sh: Use generic idle loop score: Use generic idle loop s390: Use generic idle loop powerpc: Use generic idle loop parisc: Use generic idle loop openrisc: Use generic idle loop mn10300: Use generic idle loop mips: Use generic idle loop microblaze: Use generic idle loop ...
2013-04-29ARM: default machine descriptor for multiplatformArnd Bergmann
Since we now have default implementations for init_time and init_irq, the init_machine callback is the only one that is not yet optional, but since simple DT based platforms all have the same of_platform_populate function call in there, we can consolidate them as well, and then actually boot with a completely empty machine_desc. Unofortunately we cannot just default to an empty init_machine: We cannot call of_platform_populate before init_machine because that does not work in case of auxdata, and we cannot call it after init_machine either because the machine might need to run code after adding the devices. To take the final step, this adds support for booting without defining any machine_desc whatsoever. For the case that CONFIG_MULTIPLATFORM is enabled, it adds a global machine descriptor that never matches any machine but is used as a fallback if nothing else matches. We assume that without CONFIG_MULTIPLATFORM, we only want to boot on the systems that the kernel is built for, so we still retain the build-time warning for missing machine descriptors and the run-time warning when the platform does not match in that case. In the case that we run on a multiplatform kernel and the machine provides a fully populated device tree, we attempt to keep booting, hoping that no machine specific callbacks are necessary. Finally, this also removes the misguided "select ARCH_VEXPRESS" that was only added to avoid a build error for allnoconfig kernels. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com>