aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-05[media] s2255: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] radio-rtrack2: fix mute bugHans Verkuil
Setting the frequency would unmute the card. Fixed the mute handling in the s_frequency code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] radio-isa: fix querycap capabilities codeHans Verkuil
The device_caps and capabilities fields were swapped. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] gspca: Remove gspca-specific debug magicTheodore Kilgore
Instead use v4l2_dbg and v4l2_err. Note that the PDEBUG macro is kept to make this patch-set less invasive, but it is simply a wrapper around v4l2_dbg now. Most of the other changes are there to make the dev parameter for the v4l2_xxx macros available everywhere we do logging. Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] gspca: Remove old control code now that all drivers are convertedHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] gscpa: Remove autogain_functions.hHans de Goede
Now that sonixj.c has been converted to the control framework it is no longer used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] gspca_sonixb: Remove querymenu function (dead code)Hans Verkuil
We forgot to remove that when sonixb was converted to the control framework. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] gscpa_m5602: Convert to the control frameworkHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] gscpa_gl860: Convert to the control frameworkHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] gspca_sonixj: Convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] s5p-g2d: Add DT based discovery supportSachin Kamat
This patch adds device tree based discovery support to the G2D driver. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] s3c-camif: Fail on insufficient number of allocated buffersSylwester Nawrocki
Ensure the driver gets always at least its minimum required number of buffers allocated by checking actual number of allocated buffers in vb2_reqbufs(). And free any partially allocated buffer queue with signaling an error to user space. Without this patch applications may wait forever to dequeue a filled buffer, because the hardware didn't even start after VIDIOC_STREAMON, VIDIOC_QBUF calls, due to insufficient number of empty buffers. Reported-by: Alexander Nestorov <alexandernst@gmail.com> Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] vb2: Add support for non monotonic timestampsKamil Debski
Not all drivers use monotonic timestamps. This patch adds a way to set the timestamp type per every queue. In addition, set proper timestamp type in drivers that I am sure that use either MONOTONIC or COPY timestamps. Other drivers will correctly report UNKNOWN timestamp type instead of assuming that all drivers use monotonic timestamps. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] v4l: Define video buffer flag for the COPY timestamp typeKamil Debski
Define video buffer flag for the COPY timestamp. In this case the timestamp value is copied from the OUTPUT to the corresponding CAPTURE buffer. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: implement support for count == 0 when calling REQBUFSHans Verkuil
The spec specifies that setting count to 0 in v4l2_requestbuffers should result in releasing any streaming resources and the stream ownership. Implement this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: s_fmt shouldn't grab ownershipHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: fix read() handling when reqbufs was already calledHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: enable core-lockingHans Verkuil
This makes it possible to switch to unlocked_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: zero the priv field of v4l2_pix_formatHans Verkuil
The priv field should be set to 0. In this case the driver abused the priv field for internal housekeeping. Modify the code so priv is no longer used for that purpose. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: fix querycap and simplify s_inputHans Verkuil
Add device_caps support to querycap, fill in bus_info correctly and do not set the version field (let the core handle that). Also simplify the s_input ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: add support for control events and prio handlingHans Verkuil
Also correct the first_init static: this should be part of the stk_camera struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: don't use private_data, use video_drvdataHans Verkuil
file->private_data is needed to store the pointer to struct v4l2_fh. So use video_drvdata to get hold of the stk_camera struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: add support for struct v4l2_deviceHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: remove bogus STD supportHans Verkuil
It's a webcam, the STD API is not applicable to webcams. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] stk-webcam: add ASUS F3JC to upside-down listHans Verkuil
And add an extensive comment relating the history of the upside-down handling in this driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Arvydas Sidorenko <asido4@gmail.com> Thanks-to: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix gpio big-endian problemsHans Verkuil
Tested on my big-endian ppc-based test machine. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix big-endian problemsHans Verkuil
Tested on my big-endian ppc-based test machine. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: don't use port 3 on the Conexant video grabberHans Verkuil
It's not working reliably if port 3 is enabled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: don't reset width/height on first openHans Verkuil
The last set width/height must be preserved as per the spec. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: disable 417 support from the Conexant video grabberHans Verkuil
The 417 support doesn't work. Until someone can dig into this driver to figure out why it isn't working the 417 support is disabled. Sometimes you can actually stream a bit, but very soon the whole machine crashes, so something is seriously wrong. For the record, this was not introduced by my recent changes to this driver, it was broken before that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: remove bogus driver prefix in log messagesHans Verkuil
The prefix is generated automatically, so no need to provide it again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: share ioctls with cx231xx-videoHans Verkuil
Share tuner, frequency, debug and input ioctls with cx231xx-video. These are all shared resources, so no need to implement them again. [mchehab@redhat.com: Fix merge conflict and a checkpatch issue] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: checkpatch cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: fix g/try_fmt compliance problemsHans Verkuil
Colorspace, field and priv were not set, and sizeimage was calculated using the wrong values (dev->ts1.ts_packet_size and dev->ts1.ts_packet_count can be 0 at module load). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: use one querycap for all device nodesHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: remove empty functionsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: improve std handlingHans Verkuil
Set the initial standard of subdevices instead of leaving it undefined. Also update the width and height when a new standard is chosen and return -EBUSY when attempting to change the standard while videobuf is busy. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: get rid of a bunch of unused cx231xx_fh fieldsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: replace ioctl by unlocked_ioctlHans Verkuil
There was already a core lock, so why wasn't ioctl already replaced by unlock_ioctl? This patch switches to unlocked_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: remove current_norm usageHans Verkuil
The use of this field is deprecated since it will not work when multiple device nodes reference the same video input (the video and vbi nodes in this case). The norm field should be a device-global value. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: add struct v4l2_fh to get prio and event supportHans Verkuil
Required to resolve v4l2-compliance failures. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: convert to the control frameworkHans Verkuil
This is needed to resolve the v4l2-compliance complaints about the control ioctls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix vbi compliance issuesHans Verkuil
Various v4l2-compliance fixes: remove unused sliced VBI functions, zero the reserved fields of struct v4l2_vbi_format and implement the missing s_fmt_vbi_cap. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix frequency clampingHans Verkuil
Let the tuner clamp the frequency and store that clamped value. This fixes a v4l2_compliance failure. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: zero priv field and use right width in try_fmtHans Verkuil
The priv field of v4l2_pix_format must be zeroed. Also fix a bug in try_fmt where the current width was used instead of the width passed to try_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix tuner compliance issuesHans Verkuil
The g_tuner call wasn't passed on to the subdevices, g_frequency didn't check for invalid tuners and a low-level function that was expected to return 0 or a negative error returned a positive number instead, causing s_frequency to return bogus errors. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: remove broken audio input support from the driverHans Verkuil
The audio selection code is broken. Audio and video indices were mixed up and s_audio would reject changing the audio input to something else anyway, so what's the point? All the audio input code has been removed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: clean up radio supportHans Verkuil
Radio should not use video or audio inputs. In addition, fix a bug in radio_g_tuner where s_tuner was called in the tuner subdev instead of g_tuner. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 07:15:21 +0000