diff options
Diffstat (limited to 'tools/perf/design.txt')
| -rw-r--r-- | tools/perf/design.txt | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/tools/perf/design.txt b/tools/perf/design.txt index f71e0d245cb..f1946d107b1 100644 --- a/tools/perf/design.txt +++ b/tools/perf/design.txt @@ -18,10 +18,10 @@ underlying hardware counters. Performance counters are accessed via special file descriptors. There's one file descriptor per virtual counter used. -The special file descriptor is opened via the perf_counter_open() +The special file descriptor is opened via the perf_event_open() system call: - int sys_perf_counter_open(struct perf_counter_hw_event *hw_event_uptr, + int sys_perf_event_open(struct perf_event_hw_event *hw_event_uptr, pid_t pid, int cpu, int group_fd, unsigned long flags); @@ -32,9 +32,9 @@ can be used to set the blocking mode, etc. Multiple counters can be kept open at a time, and the counters can be poll()ed. -When creating a new counter fd, 'perf_counter_hw_event' is: +When creating a new counter fd, 'perf_event_hw_event' is: -struct perf_counter_hw_event { +struct perf_event_hw_event { /* * The MSB of the config word signifies if the rest contains cpu * specific (raw) counter configuration data, if unset, the next @@ -93,7 +93,7 @@ specified by 'event_id': /* * Generalized performance counter event types, used by the hw_event.event_id - * parameter of the sys_perf_counter_open() syscall: + * parameter of the sys_perf_event_open() syscall: */ enum hw_event_ids { /* @@ -159,7 +159,7 @@ in size. * reads on the counter should return the indicated quantities, * in increasing order of bit value, after the counter value. */ -enum perf_counter_read_format { +enum perf_event_read_format { PERF_FORMAT_TOTAL_TIME_ENABLED = 1, PERF_FORMAT_TOTAL_TIME_RUNNING = 2, }; @@ -178,7 +178,7 @@ interrupt: * Bits that can be set in hw_event.record_type to request information * in the overflow packets. */ -enum perf_counter_record_format { +enum perf_event_record_format { PERF_RECORD_IP = 1U << 0, PERF_RECORD_TID = 1U << 1, PERF_RECORD_TIME = 1U << 2, @@ -228,7 +228,7 @@ these events are recorded in the ring-buffer (see below). The 'comm' bit allows tracking of process comm data on process creation. This too is recorded in the ring-buffer (see below). -The 'pid' parameter to the perf_counter_open() system call allows the +The 'pid' parameter to the perf_event_open() system call allows the counter to be specific to a task: pid == 0: if the pid parameter is zero, the counter is attached to the @@ -258,7 +258,7 @@ The 'flags' parameter is currently unused and must be zero. The 'group_fd' parameter allows counter "groups" to be set up. A counter group has one counter which is the group "leader". The leader -is created first, with group_fd = -1 in the perf_counter_open call +is created first, with group_fd = -1 in the perf_event_open call that creates it. The rest of the group members are created subsequently, with group_fd giving the fd of the group leader. (A single counter on its own is created with group_fd = -1 and is @@ -277,13 +277,13 @@ tracking are logged into a ring-buffer. This ring-buffer is created and accessed through mmap(). The mmap size should be 1+2^n pages, where the first page is a meta-data page -(struct perf_counter_mmap_page) that contains various bits of information such +(struct perf_event_mmap_page) that contains various bits of information such as where the ring-buffer head is. /* * Structure of the page that can be mapped via mmap */ -struct perf_counter_mmap_page { +struct perf_event_mmap_page { __u32 version; /* version number of this structure */ __u32 compat_version; /* lowest version this is compat with */ @@ -317,7 +317,7 @@ struct perf_counter_mmap_page { * Control data for the mmap() data buffer. * * User-space reading this value should issue an rmb(), on SMP capable - * platforms, after reading this value -- see perf_counter_wakeup(). + * platforms, after reading this value -- see perf_event_wakeup(). */ __u32 data_head; /* head in the data section */ }; @@ -327,9 +327,9 @@ NOTE: the hw-counter userspace bits are arch specific and are currently only The following 2^n pages are the ring-buffer which contains events of the form: -#define PERF_EVENT_MISC_KERNEL (1 << 0) -#define PERF_EVENT_MISC_USER (1 << 1) -#define PERF_EVENT_MISC_OVERFLOW (1 << 2) +#define PERF_RECORD_MISC_KERNEL (1 << 0) +#define PERF_RECORD_MISC_USER (1 << 1) +#define PERF_RECORD_MISC_OVERFLOW (1 << 2) struct perf_event_header { __u32 type; @@ -353,8 +353,8 @@ enum perf_event_type { * char filename[]; * }; */ - PERF_EVENT_MMAP = 1, - PERF_EVENT_MUNMAP = 2, + PERF_RECORD_MMAP = 1, + PERF_RECORD_MUNMAP = 2, /* * struct { @@ -364,10 +364,10 @@ enum perf_event_type { * char comm[]; * }; */ - PERF_EVENT_COMM = 3, + PERF_RECORD_COMM = 3, /* - * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field + * When header.misc & PERF_RECORD_MISC_OVERFLOW the event_type field * will be PERF_RECORD_* * * struct { @@ -397,7 +397,7 @@ Notification of new events is possible through poll()/select()/epoll() and fcntl() managing signals. Normally a notification is generated for every page filled, however one can -additionally set perf_counter_hw_event.wakeup_events to generate one every +additionally set perf_event_hw_event.wakeup_events to generate one every so many counter overflow events. Future work will include a splice() interface to the ring-buffer. @@ -409,11 +409,11 @@ events but does continue to exist and maintain its count value. An individual counter or counter group can be enabled with - ioctl(fd, PERF_COUNTER_IOC_ENABLE); + ioctl(fd, PERF_EVENT_IOC_ENABLE); or disabled with - ioctl(fd, PERF_COUNTER_IOC_DISABLE); + ioctl(fd, PERF_EVENT_IOC_DISABLE); Enabling or disabling the leader of a group enables or disables the whole group; that is, while the group leader is disabled, none of the @@ -424,16 +424,16 @@ other counter. Additionally, non-inherited overflow counters can use - ioctl(fd, PERF_COUNTER_IOC_REFRESH, nr); + ioctl(fd, PERF_EVENT_IOC_REFRESH, nr); to enable a counter for 'nr' events, after which it gets disabled again. A process can enable or disable all the counter groups that are attached to it, using prctl: - prctl(PR_TASK_PERF_COUNTERS_ENABLE); + prctl(PR_TASK_PERF_EVENTS_ENABLE); - prctl(PR_TASK_PERF_COUNTERS_DISABLE); + prctl(PR_TASK_PERF_EVENTS_DISABLE); This applies to all counters on the current process, whether created by this process or by another, and doesn't affect any counters that @@ -447,11 +447,11 @@ Arch requirements If your architecture does not have hardware performance metrics, you can still use the generic software counters based on hrtimers for sampling. -So to start with, in order to add HAVE_PERF_COUNTERS to your Kconfig, you +So to start with, in order to add HAVE_PERF_EVENTS to your Kconfig, you will need at least this: - - asm/perf_counter.h - a basic stub will suffice at first + - asm/perf_event.h - a basic stub will suffice at first - support for atomic64 types (and associated helper functions) - - set_perf_counter_pending() implemented + - set_perf_event_pending() implemented If your architecture does have hardware capabilities, you can override the -weak stub hw_perf_counter_init() to register hardware counters. +weak stub hw_perf_event_init() to register hardware counters. |