aboutsummaryrefslogtreecommitdiff
path: root/include/linux/nl80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/nl80211.h')
-rw-r--r--include/linux/nl80211.h174
1 files changed, 169 insertions, 5 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index dbea93b694e..a8d71ed43a0 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -242,6 +242,29 @@
* @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
* determined by the network interface.
*
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ * to identify the device, and the TESTDATA blob attribute to pass through
+ * to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ * requests to connect to a specified network but without separating
+ * auth and assoc steps. For this, you need to specify the SSID in a
+ * %NL80211_ATTR_SSID attribute, and can optionally specify the association
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
+ * It is also sent as an event, with the BSSID and response IEs when the
+ * connection is established or failed to be established. This can be
+ * determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ * sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ * %NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ * associated with this wiphy must be down and will follow.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -310,6 +333,14 @@ enum nl80211_commands {
NL80211_CMD_JOIN_IBSS,
NL80211_CMD_LEAVE_IBSS,
+ NL80211_CMD_TESTMODE,
+
+ NL80211_CMD_CONNECT,
+ NL80211_CMD_ROAM,
+ NL80211_CMD_DISCONNECT,
+
+ NL80211_CMD_SET_WIPHY_NETNS,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -449,10 +480,6 @@ enum nl80211_commands {
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
* scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
- * scan result list changes (BSS expired or added) so that applications
- * can verify that they got a single, consistent snapshot (when all dump
- * messages carried the same generation number)
* @NL80211_ATTR_BSS: scan result BSS
*
* @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
@@ -511,6 +538,52 @@ enum nl80211_commands {
* authorized by user space. Otherwise, port is marked authorized by
* default in station mode.
*
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ * We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ * event was due to the AP disconnecting the station, and not due to
+ * a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ * event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ * that protected APs should be used.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
+ * indicate which unicast key ciphers will be used with the connection
+ * (an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
+ * which group key cipher will be used with the connection (a u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
+ * which WPA version(s) the AP we want to associate with is using
+ * (a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
+ * which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ * sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ * sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ * commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ * %NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ * and join_ibss(), key information is in a nested attribute each
+ * with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ * dumps. This number increases whenever the object list being
+ * dumped changes, and as such userspace can verify that it has
+ * obtained a complete and consistent snapshot by verifying that
+ * all dump messages contain the same generation number. If it
+ * changed then the list changed and the dump should be repeated
+ * completely from scratch.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -582,7 +655,7 @@ enum nl80211_attrs {
NL80211_ATTR_SCAN_FREQUENCIES,
NL80211_ATTR_SCAN_SSIDS,
- NL80211_ATTR_SCAN_GENERATION,
+ NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
NL80211_ATTR_BSS,
NL80211_ATTR_REG_INITIATOR,
@@ -619,16 +692,42 @@ enum nl80211_attrs {
NL80211_ATTR_CONTROL_PORT,
+ NL80211_ATTR_TESTDATA,
+
+ NL80211_ATTR_PRIVACY,
+
+ NL80211_ATTR_DISCONNECTED_BY_AP,
+ NL80211_ATTR_STATUS_CODE,
+
+ NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ NL80211_ATTR_CIPHER_SUITE_GROUP,
+ NL80211_ATTR_WPA_VERSIONS,
+ NL80211_ATTR_AKM_SUITES,
+
+ NL80211_ATTR_REQ_IE,
+ NL80211_ATTR_RESP_IE,
+
+ NL80211_ATTR_PREV_BSSID,
+
+ NL80211_ATTR_KEY,
+ NL80211_ATTR_KEYS,
+
+ NL80211_ATTR_PID,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
};
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+
/*
* Allow user space programs to use #ifdef on new attributes by defining them
* here
*/
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
@@ -642,6 +741,12 @@ enum nl80211_attrs {
#define NL80211_ATTR_SSID NL80211_ATTR_SSID
#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_REG_RULES 32
@@ -650,6 +755,9 @@ enum nl80211_attrs {
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
+#define NL80211_MAX_NR_CIPHER_SUITES 5
+#define NL80211_MAX_NR_AKM_SUITES 2
+
/**
* enum nl80211_iftype - (virtual) interface types
*
@@ -1168,6 +1276,7 @@ enum nl80211_channel_type {
* in mBm (100 * dBm) (s32)
* @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
* in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -1181,6 +1290,7 @@ enum nl80211_bss {
NL80211_BSS_INFORMATION_ELEMENTS,
NL80211_BSS_SIGNAL_MBM,
NL80211_BSS_SIGNAL_UNSPEC,
+ NL80211_BSS_STATUS,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -1188,18 +1298,37 @@ enum nl80211_bss {
};
/**
+ * enum nl80211_bss_status - BSS "status"
+ */
+enum nl80211_bss_status {
+ NL80211_BSS_STATUS_AUTHENTICATED,
+ NL80211_BSS_STATUS_ASSOCIATED,
+ NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
* enum nl80211_auth_type - AuthenticationType
*
* @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
* @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ * trying multiple times); this is invalid in netlink -- leave out
+ * the attribute for this on CONNECT commands.
*/
enum nl80211_auth_type {
NL80211_AUTHTYPE_OPEN_SYSTEM,
NL80211_AUTHTYPE_SHARED_KEY,
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
+
+ /* keep last */
+ __NL80211_AUTHTYPE_NUM,
+ NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+ NL80211_AUTHTYPE_AUTOMATIC
};
/**
@@ -1224,4 +1353,39 @@ enum nl80211_mfp {
NL80211_MFP_REQUIRED,
};
+enum nl80211_wpa_versions {
+ NL80211_WPA_VERSION_1 = 1 << 0,
+ NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ * keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ * section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ * CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+ __NL80211_KEY_INVALID,
+ NL80211_KEY_DATA,
+ NL80211_KEY_IDX,
+ NL80211_KEY_CIPHER,
+ NL80211_KEY_SEQ,
+ NL80211_KEY_DEFAULT,
+ NL80211_KEY_DEFAULT_MGMT,
+
+ /* keep last */
+ __NL80211_KEY_AFTER_LAST,
+ NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
#endif /* __LINUX_NL80211_H */