diff options
Diffstat (limited to 'include/linux/i2c/twl4030.h')
| -rw-r--r-- | include/linux/i2c/twl4030.h | 113 |
1 files changed, 97 insertions, 16 deletions
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 0dc80ef2497..2d02dfd7076 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -25,6 +25,9 @@ #ifndef __TWL4030_H_ #define __TWL4030_H_ +#include <linux/types.h> +#include <linux/input/matrix_keypad.h> + /* * Using the twl4030 core we address registers using a pair * { module id, relative register offset } @@ -220,19 +223,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /* Power bus message definitions */ -#define DEV_GRP_NULL 0x0 -#define DEV_GRP_P1 0x1 -#define DEV_GRP_P2 0x2 -#define DEV_GRP_P3 0x4 +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ -#define RES_GRP_RES 0x0 -#define RES_GRP_PP 0x1 -#define RES_GRP_RC 0x2 +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ #define RES_GRP_PP_RC 0x3 -#define RES_GRP_PR 0x4 +#define RES_GRP_PR 0x4 /* Power references */ #define RES_GRP_PP_PR 0x5 #define RES_GRP_RC_PR 0x6 -#define RES_GRP_ALL 0x7 +#define RES_GRP_ALL 0x7 /* All resource groups */ #define RES_TYPE2_R0 0x0 @@ -243,6 +255,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); #define RES_STATE_SLEEP 0x8 #define RES_STATE_OFF 0x0 +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 /* * Power Bus Message Format ... these can be sent individually by Linux, * but are usually part of downloaded scripts that are run when various @@ -302,13 +349,17 @@ struct twl4030_madc_platform_data { int irq_line; }; +/* Boards have uniqe mappings of {col, row} --> keycode. + * Column and row are 4 bits, but range only from 0..7. + * a PERSISTENT_KEY is "always on" and never reported. + */ +#define PERSISTENT_KEY(c, r) KEY((c), (r), KEY_RESERVED) + struct twl4030_keypad_data { - int rows; - int cols; - int *keymap; - int irq; - unsigned int keymapsize; - unsigned int rep:1; + const struct matrix_keymap_data *keymap_data; + unsigned rows; + unsigned cols; + bool rep; }; enum twl4030_usb_mode { @@ -320,6 +371,36 @@ struct twl4030_usb_data { enum twl4030_usb_mode usb_mode; }; +struct twl4030_ins { + u16 pmb_message; + u8 delay; +}; + +struct twl4030_script { + struct twl4030_ins *script; + unsigned size; + u8 flags; +#define TWL4030_WRST_SCRIPT (1<<0) +#define TWL4030_WAKEUP12_SCRIPT (1<<1) +#define TWL4030_WAKEUP3_SCRIPT (1<<2) +#define TWL4030_SLEEP_SCRIPT (1<<3) +}; + +struct twl4030_resconfig { + u8 resource; + u8 devgroup; /* Processor group that Power resource belongs to */ + u8 type; /* Power resource addressed, 6 / broadcast message */ + u8 type2; /* Power resource addressed, 3 / broadcast message */ +}; + +struct twl4030_power_data { + struct twl4030_script **scripts; + unsigned num; + struct twl4030_resconfig *resource_config; +}; + +extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); + struct twl4030_platform_data { unsigned irq_base, irq_end; struct twl4030_bci_platform_data *bci; @@ -327,6 +408,7 @@ struct twl4030_platform_data { struct twl4030_madc_platform_data *madc; struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; + struct twl4030_power_data *power; /* LDO regulators */ struct regulator_init_data *vdac; @@ -357,7 +439,6 @@ int twl4030_sih_setup(int module); #define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEDICATED 0x22 - #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) extern int twl4030charger_usb_en(int enable); |