diff options
Diffstat (limited to 'drivers/vme/bridges/vme_tsi148.c')
| -rw-r--r-- | drivers/vme/bridges/vme_tsi148.c | 2691 |
1 files changed, 2691 insertions, 0 deletions
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c new file mode 100644 index 00000000000..081e9c4c5e7 --- /dev/null +++ b/drivers/vme/bridges/vme_tsi148.c @@ -0,0 +1,2691 @@ +/* + * Support for the Tundra TSI148 VME-PCI Bridge Chip + * + * Author: Martyn Welch <martyn.welch@ge.com> + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on work by Tom Armistead and Ajit Prem + * Copyright 2004 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/byteorder/generic.h> +#include <linux/vme.h> + +#include "../vme_bridge.h" +#include "vme_tsi148.h" + +static int __init tsi148_init(void); +static int tsi148_probe(struct pci_dev *, const struct pci_device_id *); +static void tsi148_remove(struct pci_dev *); +static void __exit tsi148_exit(void); + + +/* Module parameter */ +static bool err_chk; +static int geoid; + +static const char driver_name[] = "vme_tsi148"; + +static DEFINE_PCI_DEVICE_TABLE(tsi148_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) }, + { }, +}; + +static struct pci_driver tsi148_driver = { + .name = driver_name, + .id_table = tsi148_ids, + .probe = tsi148_probe, + .remove = tsi148_remove, +}; + +static void reg_join(unsigned int high, unsigned int low, + unsigned long long *variable) +{ + *variable = (unsigned long long)high << 32; + *variable |= (unsigned long long)low; +} + +static void reg_split(unsigned long long variable, unsigned int *high, + unsigned int *low) +{ + *low = (unsigned int)variable & 0xFFFFFFFF; + *high = (unsigned int)(variable >> 32); +} + +/* + * Wakes up DMA queue. + */ +static u32 tsi148_DMA_irqhandler(struct tsi148_driver *bridge, + int channel_mask) +{ + u32 serviced = 0; + + if (channel_mask & TSI148_LCSR_INTS_DMA0S) { + wake_up(&bridge->dma_queue[0]); + serviced |= TSI148_LCSR_INTC_DMA0C; + } + if (channel_mask & TSI148_LCSR_INTS_DMA1S) { + wake_up(&bridge->dma_queue[1]); + serviced |= TSI148_LCSR_INTC_DMA1C; + } + + return serviced; +} + +/* + * Wake up location monitor queue + */ +static u32 tsi148_LM_irqhandler(struct tsi148_driver *bridge, u32 stat) +{ + int i; + u32 serviced = 0; + + for (i = 0; i < 4; i++) { + if (stat & TSI148_LCSR_INTS_LMS[i]) { + /* We only enable interrupts if the callback is set */ + bridge->lm_callback[i](i); + serviced |= TSI148_LCSR_INTC_LMC[i]; + } + } + + return serviced; +} + +/* + * Wake up mail box queue. + * + * XXX This functionality is not exposed up though API. + */ +static u32 tsi148_MB_irqhandler(struct vme_bridge *tsi148_bridge, u32 stat) +{ + int i; + u32 val; + u32 serviced = 0; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + for (i = 0; i < 4; i++) { + if (stat & TSI148_LCSR_INTS_MBS[i]) { + val = ioread32be(bridge->base + TSI148_GCSR_MBOX[i]); + dev_err(tsi148_bridge->parent, "VME Mailbox %d received" + ": 0x%x\n", i, val); + serviced |= TSI148_LCSR_INTC_MBC[i]; + } + } + + return serviced; +} + +/* + * Display error & status message when PERR (PCI) exception interrupt occurs. + */ +static u32 tsi148_PERR_irqhandler(struct vme_bridge *tsi148_bridge) +{ + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, " + "attributes: %08x\n", + ioread32be(bridge->base + TSI148_LCSR_EDPAU), + ioread32be(bridge->base + TSI148_LCSR_EDPAL), + ioread32be(bridge->base + TSI148_LCSR_EDPAT)); + + dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split " + "completion reg: %08x\n", + ioread32be(bridge->base + TSI148_LCSR_EDPXA), + ioread32be(bridge->base + TSI148_LCSR_EDPXS)); + + iowrite32be(TSI148_LCSR_EDPAT_EDPCL, bridge->base + TSI148_LCSR_EDPAT); + + return TSI148_LCSR_INTC_PERRC; +} + +/* + * Save address and status when VME error interrupt occurs. + */ +static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) +{ + unsigned int error_addr_high, error_addr_low; + unsigned long long error_addr; + u32 error_attrib; + struct vme_bus_error *error; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU); + error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL); + error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT); + + reg_join(error_addr_high, error_addr_low, &error_addr); + + /* Check for exception register overflow (we have lost error data) */ + if (error_attrib & TSI148_LCSR_VEAT_VEOF) { + dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow " + "Occurred\n"); + } + + error = kmalloc(sizeof(struct vme_bus_error), GFP_ATOMIC); + if (error) { + error->address = error_addr; + error->attributes = error_attrib; + list_add_tail(&error->list, &tsi148_bridge->vme_errors); + } else { + dev_err(tsi148_bridge->parent, "Unable to alloc memory for " + "VMEbus Error reporting\n"); + dev_err(tsi148_bridge->parent, "VME Bus Error at address: " + "0x%llx, attributes: %08x\n", error_addr, error_attrib); + } + + /* Clear Status */ + iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT); + + return TSI148_LCSR_INTC_VERRC; +} + +/* + * Wake up IACK queue. + */ +static u32 tsi148_IACK_irqhandler(struct tsi148_driver *bridge) +{ + wake_up(&bridge->iack_queue); + + return TSI148_LCSR_INTC_IACKC; +} + +/* + * Calling VME bus interrupt callback if provided. + */ +static u32 tsi148_VIRQ_irqhandler(struct vme_bridge *tsi148_bridge, + u32 stat) +{ + int vec, i, serviced = 0; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + for (i = 7; i > 0; i--) { + if (stat & (1 << i)) { + /* + * Note: Even though the registers are defined as + * 32-bits in the spec, we only want to issue 8-bit + * IACK cycles on the bus, read from offset 3. + */ + vec = ioread8(bridge->base + TSI148_LCSR_VIACK[i] + 3); + + vme_irq_handler(tsi148_bridge, i, vec); + + serviced |= (1 << i); + } + } + + return serviced; +} + +/* + * Top level interrupt handler. Clears appropriate interrupt status bits and + * then calls appropriate sub handler(s). + */ +static irqreturn_t tsi148_irqhandler(int irq, void *ptr) +{ + u32 stat, enable, serviced = 0; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = ptr; + + bridge = tsi148_bridge->driver_priv; + + /* Determine which interrupts are unmasked and set */ + enable = ioread32be(bridge->base + TSI148_LCSR_INTEO); + stat = ioread32be(bridge->base + TSI148_LCSR_INTS); + + /* Only look at unmasked interrupts */ + stat &= enable; + + if (unlikely(!stat)) + return IRQ_NONE; + + /* Call subhandlers as appropriate */ + /* DMA irqs */ + if (stat & (TSI148_LCSR_INTS_DMA1S | TSI148_LCSR_INTS_DMA0S)) + serviced |= tsi148_DMA_irqhandler(bridge, stat); + + /* Location monitor irqs */ + if (stat & (TSI148_LCSR_INTS_LM3S | TSI148_LCSR_INTS_LM2S | + TSI148_LCSR_INTS_LM1S | TSI148_LCSR_INTS_LM0S)) + serviced |= tsi148_LM_irqhandler(bridge, stat); + + /* Mail box irqs */ + if (stat & (TSI148_LCSR_INTS_MB3S | TSI148_LCSR_INTS_MB2S | + TSI148_LCSR_INTS_MB1S | TSI148_LCSR_INTS_MB0S)) + serviced |= tsi148_MB_irqhandler(tsi148_bridge, stat); + + /* PCI bus error */ + if (stat & TSI148_LCSR_INTS_PERRS) + serviced |= tsi148_PERR_irqhandler(tsi148_bridge); + + /* VME bus error */ + if (stat & TSI148_LCSR_INTS_VERRS) + serviced |= tsi148_VERR_irqhandler(tsi148_bridge); + + /* IACK irq */ + if (stat & TSI148_LCSR_INTS_IACKS) + serviced |= tsi148_IACK_irqhandler(bridge); + + /* VME bus irqs */ + if (stat & (TSI148_LCSR_INTS_IRQ7S | TSI148_LCSR_INTS_IRQ6S | + TSI148_LCSR_INTS_IRQ5S | TSI148_LCSR_INTS_IRQ4S | + TSI148_LCSR_INTS_IRQ3S | TSI148_LCSR_INTS_IRQ2S | + TSI148_LCSR_INTS_IRQ1S)) + serviced |= tsi148_VIRQ_irqhandler(tsi148_bridge, stat); + + /* Clear serviced interrupts */ + iowrite32be(serviced, bridge->base + TSI148_LCSR_INTC); + + return IRQ_HANDLED; +} + +static int tsi148_irq_init(struct vme_bridge *tsi148_bridge) +{ + int result; + unsigned int tmp; + struct pci_dev *pdev; + struct tsi148_driver *bridge; + + pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); + + bridge = tsi148_bridge->driver_priv; + + /* Initialise list for VME bus errors */ + INIT_LIST_HEAD(&tsi148_bridge->vme_errors); + + mutex_init(&tsi148_bridge->irq_mtx); + + result = request_irq(pdev->irq, + tsi148_irqhandler, + IRQF_SHARED, + driver_name, tsi148_bridge); + if (result) { + dev_err(tsi148_bridge->parent, "Can't get assigned pci irq " + "vector %02X\n", pdev->irq); + return result; + } + + /* Enable and unmask interrupts */ + tmp = TSI148_LCSR_INTEO_DMA1EO | TSI148_LCSR_INTEO_DMA0EO | + TSI148_LCSR_INTEO_MB3EO | TSI148_LCSR_INTEO_MB2EO | + TSI148_LCSR_INTEO_MB1EO | TSI148_LCSR_INTEO_MB0EO | + TSI148_LCSR_INTEO_PERREO | TSI148_LCSR_INTEO_VERREO | + TSI148_LCSR_INTEO_IACKEO; + + /* This leaves the following interrupts masked. + * TSI148_LCSR_INTEO_VIEEO + * TSI148_LCSR_INTEO_SYSFLEO + * TSI148_LCSR_INTEO_ACFLEO + */ + + /* Don't enable Location Monitor interrupts here - they will be + * enabled when the location monitors are properly configured and + * a callback has been attached. + * TSI148_LCSR_INTEO_LM0EO + * TSI148_LCSR_INTEO_LM1EO + * TSI148_LCSR_INTEO_LM2EO + * TSI148_LCSR_INTEO_LM3EO + */ + + /* Don't enable VME interrupts until we add a handler, else the board + * will respond to it and we don't want that unless it knows how to + * properly deal with it. + * TSI148_LCSR_INTEO_IRQ7EO + * TSI148_LCSR_INTEO_IRQ6EO + * TSI148_LCSR_INTEO_IRQ5EO + * TSI148_LCSR_INTEO_IRQ4EO + * TSI148_LCSR_INTEO_IRQ3EO + * TSI148_LCSR_INTEO_IRQ2EO + * TSI148_LCSR_INTEO_IRQ1EO + */ + + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + + return 0; +} + +static void tsi148_irq_exit(struct vme_bridge *tsi148_bridge, + struct pci_dev *pdev) +{ + struct tsi148_driver *bridge = tsi148_bridge->driver_priv; + + /* Turn off interrupts */ + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEO); + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEN); + + /* Clear all interrupts */ + iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_INTC); + + /* Detach interrupt handler */ + free_irq(pdev->irq, tsi148_bridge); +} + +/* + * Check to see if an IACk has been received, return true (1) or false (0). + */ +static int tsi148_iack_received(struct tsi148_driver *bridge) +{ + u32 tmp; + + tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); + + if (tmp & TSI148_LCSR_VICR_IRQS) + return 0; + else + return 1; +} + +/* + * Configure VME interrupt + */ +static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level, + int state, int sync) +{ + struct pci_dev *pdev; + u32 tmp; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + /* We need to do the ordering differently for enabling and disabling */ + if (state == 0) { + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); + tmp &= ~TSI148_LCSR_INTEN_IRQEN[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp &= ~TSI148_LCSR_INTEO_IRQEO[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + if (sync != 0) { + pdev = container_of(tsi148_bridge->parent, + struct pci_dev, dev); + + synchronize_irq(pdev->irq); + } + } else { + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp |= TSI148_LCSR_INTEO_IRQEO[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); + tmp |= TSI148_LCSR_INTEN_IRQEN[level - 1]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + } +} + +/* + * Generate a VME bus interrupt at the requested level & vector. Wait for + * interrupt to be acked. + */ +static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level, + int statid) +{ + u32 tmp; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&bridge->vme_int); + + /* Read VICR register */ + tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); + + /* Set Status/ID */ + tmp = (tmp & ~TSI148_LCSR_VICR_STID_M) | + (statid & TSI148_LCSR_VICR_STID_M); + iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); + + /* Assert VMEbus IRQ */ + tmp = tmp | TSI148_LCSR_VICR_IRQL[level]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); + + /* XXX Consider implementing a timeout? */ + wait_event_interruptible(bridge->iack_queue, + tsi148_iack_received(bridge)); + + mutex_unlock(&bridge->vme_int); + + return 0; +} + +/* + * Find the first error in this address range + */ +static struct vme_bus_error *tsi148_find_error(struct vme_bridge *tsi148_bridge, + u32 aspace, unsigned long long address, size_t count) +{ + struct list_head *err_pos; + struct vme_bus_error *vme_err, *valid = NULL; + unsigned long long bound; + + bound = address + count; + + /* + * XXX We are currently not looking at the address space when parsing + * for errors. This is because parsing the Address Modifier Codes + * is going to be quite resource intensive to do properly. We + * should be OK just looking at the addresses and this is certainly + * much better than what we had before. + */ + err_pos = NULL; + /* Iterate through errors */ + list_for_each(err_pos, &tsi148_bridge->vme_errors) { + vme_err = list_entry(err_pos, struct vme_bus_error, list); + if ((vme_err->address >= address) && + (vme_err->address < bound)) { + + valid = vme_err; + break; + } + } + + return valid; +} + +/* + * Clear errors in the provided address range. + */ +static void tsi148_clear_errors(struct vme_bridge *tsi148_bridge, + u32 aspace, unsigned long long address, size_t count) +{ + struct list_head *err_pos, *temp; + struct vme_bus_error *vme_err; + unsigned long long bound; + + bound = address + count; + + /* + * XXX We are currently not looking at the address space when parsing + * for errors. This is because parsing the Address Modifier Codes + * is going to be quite resource intensive to do properly. We + * should be OK just looking at the addresses and this is certainly + * much better than what we had before. + */ + err_pos = NULL; + /* Iterate through errors */ + list_for_each_safe(err_pos, temp, &tsi148_bridge->vme_errors) { + vme_err = list_entry(err_pos, struct vme_bus_error, list); + + if ((vme_err->address >= address) && + (vme_err->address < bound)) { + + list_del(err_pos); + kfree(vme_err); + } + } +} + +/* + * Initialize a slave window with the requested attributes. + */ +static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, + dma_addr_t pci_base, u32 aspace, u32 cycle) +{ + unsigned int i, addr = 0, granularity = 0; + unsigned int temp_ctl = 0; + unsigned int vme_base_low, vme_base_high; + unsigned int vme_bound_low, vme_bound_high; + unsigned int pci_offset_low, pci_offset_high; + unsigned long long vme_bound, pci_offset; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = image->parent; + bridge = tsi148_bridge->driver_priv; + + i = image->number; + + switch (aspace) { + case VME_A16: + granularity = 0x10; + addr |= TSI148_LCSR_ITAT_AS_A16; + break; + case VME_A24: + granularity = 0x1000; + addr |= TSI148_LCSR_ITAT_AS_A24; + break; + case VME_A32: + granularity = 0x10000; + addr |= TSI148_LCSR_ITAT_AS_A32; + break; + case VME_A64: + granularity = 0x10000; + addr |= TSI148_LCSR_ITAT_AS_A64; + break; + case VME_CRCSR: + case VME_USER1: + case VME_USER2: + case VME_USER3: + case VME_USER4: + default: + dev_err(tsi148_bridge->parent, "Invalid address space\n"); + return -EINVAL; + break; + } + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_split(vme_base, &vme_base_high, &vme_base_low); + + /* + * Bound address is a valid address for the window, adjust + * accordingly + */ + vme_bound = vme_base + size - granularity; + reg_split(vme_bound, &vme_bound_high, &vme_bound_low); + pci_offset = (unsigned long long)pci_base - vme_base; + reg_split(pci_offset, &pci_offset_high, &pci_offset_low); + + if (vme_base_low & (granularity - 1)) { + dev_err(tsi148_bridge->parent, "Invalid VME base alignment\n"); + return -EINVAL; + } + if (vme_bound_low & (granularity - 1)) { + dev_err(tsi148_bridge->parent, "Invalid VME bound alignment\n"); + return -EINVAL; + } + if (pci_offset_low & (granularity - 1)) { + dev_err(tsi148_bridge->parent, "Invalid PCI Offset " + "alignment\n"); + return -EINVAL; + } + + /* Disable while we are mucking around */ + temp_ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + temp_ctl &= ~TSI148_LCSR_ITAT_EN; + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + /* Setup mapping */ + iowrite32be(vme_base_high, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAU); + iowrite32be(vme_base_low, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAL); + iowrite32be(vme_bound_high, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAU); + iowrite32be(vme_bound_low, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAL); + iowrite32be(pci_offset_high, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFU); + iowrite32be(pci_offset_low, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFL); + + /* Setup 2eSST speeds */ + temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160; + break; + case VME_2eSST267: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267; + break; + case VME_2eSST320: + temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + temp_ctl &= ~(0x1F << 7); + if (cycle & VME_BLT) + temp_ctl |= TSI148_LCSR_ITAT_BLT; + if (cycle & VME_MBLT) + temp_ctl |= TSI148_LCSR_ITAT_MBLT; + if (cycle & VME_2eVME) + temp_ctl |= TSI148_LCSR_ITAT_2eVME; + if (cycle & VME_2eSST) + temp_ctl |= TSI148_LCSR_ITAT_2eSST; + if (cycle & VME_2eSSTB) + temp_ctl |= TSI148_LCSR_ITAT_2eSSTB; + + /* Setup address space */ + temp_ctl &= ~TSI148_LCSR_ITAT_AS_M; + temp_ctl |= addr; + + temp_ctl &= ~0xF; + if (cycle & VME_SUPER) + temp_ctl |= TSI148_LCSR_ITAT_SUPR ; + if (cycle & VME_USER) + temp_ctl |= TSI148_LCSR_ITAT_NPRIV; + if (cycle & VME_PROG) + temp_ctl |= TSI148_LCSR_ITAT_PGM; + if (cycle & VME_DATA) + temp_ctl |= TSI148_LCSR_ITAT_DATA; + + /* Write ctl reg without enable */ + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + if (enabled) + temp_ctl |= TSI148_LCSR_ITAT_EN; + + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + return 0; +} + +/* + * Get slave window configuration. + */ +static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, + dma_addr_t *pci_base, u32 *aspace, u32 *cycle) +{ + unsigned int i, granularity = 0, ctl = 0; + unsigned int vme_base_low, vme_base_high; + unsigned int vme_bound_low, vme_bound_high; + unsigned int pci_offset_low, pci_offset_high; + unsigned long long vme_bound, pci_offset; + struct tsi148_driver *bridge; + + bridge = image->parent->driver_priv; + + i = image->number; + + /* Read registers */ + ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + + vme_base_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAU); + vme_base_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITSAL); + vme_bound_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAU); + vme_bound_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITEAL); + pci_offset_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFU); + pci_offset_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITOFL); + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_join(vme_base_high, vme_base_low, vme_base); + reg_join(vme_bound_high, vme_bound_low, &vme_bound); + reg_join(pci_offset_high, pci_offset_low, &pci_offset); + + *pci_base = (dma_addr_t)vme_base + pci_offset; + + *enabled = 0; + *aspace = 0; + *cycle = 0; + + if (ctl & TSI148_LCSR_ITAT_EN) + *enabled = 1; + + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A16) { + granularity = 0x10; + *aspace |= VME_A16; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A24) { + granularity = 0x1000; + *aspace |= VME_A24; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A32) { + granularity = 0x10000; + *aspace |= VME_A32; + } + if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A64) { + granularity = 0x10000; + *aspace |= VME_A64; + } + + /* Need granularity before we set the size */ + *size = (unsigned long long)((vme_bound - *vme_base) + granularity); + + + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) + *cycle |= VME_2eSST160; + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) + *cycle |= VME_2eSST267; + if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) + *cycle |= VME_2eSST320; + + if (ctl & TSI148_LCSR_ITAT_BLT) + *cycle |= VME_BLT; + if (ctl & TSI148_LCSR_ITAT_MBLT) + *cycle |= VME_MBLT; + if (ctl & TSI148_LCSR_ITAT_2eVME) + *cycle |= VME_2eVME; + if (ctl & TSI148_LCSR_ITAT_2eSST) + *cycle |= VME_2eSST; + if (ctl & TSI148_LCSR_ITAT_2eSSTB) + *cycle |= VME_2eSSTB; + + if (ctl & TSI148_LCSR_ITAT_SUPR) + *cycle |= VME_SUPER; + if (ctl & TSI148_LCSR_ITAT_NPRIV) + *cycle |= VME_USER; + if (ctl & TSI148_LCSR_ITAT_PGM) + *cycle |= VME_PROG; + if (ctl & TSI148_LCSR_ITAT_DATA) + *cycle |= VME_DATA; + + return 0; +} + +/* + * Allocate and map PCI Resource + */ +static int tsi148_alloc_resource(struct vme_master_resource *image, + unsigned long long size) +{ + unsigned long long existing_size; + int retval = 0; + struct pci_dev *pdev; + struct vme_bridge *tsi148_bridge; + + tsi148_bridge = image->parent; + + pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev); + + existing_size = (unsigned long long)(image->bus_resource.end - + image->bus_resource.start); + + /* If the existing size is OK, return */ + if ((size != 0) && (existing_size == (size - 1))) + return 0; + + if (existing_size != 0) { + iounmap(image->kern_base); + image->kern_base = NULL; + kfree(image->bus_resource.name); + release_resource(&image->bus_resource); + memset(&image->bus_resource, 0, sizeof(struct resource)); + } + + /* Exit here if size is zero */ + if (size == 0) + return 0; + + if (image->bus_resource.name == NULL) { + image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC); + if (image->bus_resource.name == NULL) { + dev_err(tsi148_bridge->parent, "Unable to allocate " + "memory for resource name\n"); + retval = -ENOMEM; + goto err_name; + } + } + + sprintf((char *)image->bus_resource.name, "%s.%d", tsi148_bridge->name, + image->number); + + image->bus_resource.start = 0; + image->bus_resource.end = (unsigned long)size; + image->bus_resource.flags = IORESOURCE_MEM; + + retval = pci_bus_alloc_resource(pdev->bus, + &image->bus_resource, size, size, PCIBIOS_MIN_MEM, + 0, NULL, NULL); + if (retval) { + dev_err(tsi148_bridge->parent, "Failed to allocate mem " + "resource for window %d size 0x%lx start 0x%lx\n", + image->number, (unsigned long)size, + (unsigned long)image->bus_resource.start); + goto err_resource; + } + + image->kern_base = ioremap_nocache( + image->bus_resource.start, size); + if (image->kern_base == NULL) { + dev_err(tsi148_bridge->parent, "Failed to remap resource\n"); + retval = -ENOMEM; + goto err_remap; + } + + return 0; + +err_remap: + release_resource(&image->bus_resource); +err_resource: + kfree(image->bus_resource.name); + memset(&image->bus_resource, 0, sizeof(struct resource)); +err_name: + return retval; +} + +/* + * Free and unmap PCI Resource + */ +static void tsi148_free_resource(struct vme_master_resource *image) +{ + iounmap(image->kern_base); + image->kern_base = NULL; + release_resource(&image->bus_resource); + kfree(image->bus_resource.name); + memset(&image->bus_resource, 0, sizeof(struct resource)); +} + +/* + * Set the attributes of an outbound window. + */ +static int tsi148_master_set(struct vme_master_resource *image, int enabled, + unsigned long long vme_base, unsigned long long size, u32 aspace, + u32 cycle, u32 dwidth) +{ + int retval = 0; + unsigned int i; + unsigned int temp_ctl = 0; + unsigned int pci_base_low, pci_base_high; + unsigned int pci_bound_low, pci_bound_high; + unsigned int vme_offset_low, vme_offset_high; + unsigned long long pci_bound, vme_offset, pci_base; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = image->parent; + + bridge = tsi148_bridge->driver_priv; + + /* Verify input data */ + if (vme_base & 0xFFFF) { + dev_err(tsi148_bridge->parent, "Invalid VME Window " + "alignment\n"); + retval = -EINVAL; + goto err_window; + } + + if ((size == 0) && (enabled != 0)) { + dev_err(tsi148_bridge->parent, "Size must be non-zero for " + "enabled windows\n"); + retval = -EINVAL; + goto err_window; + } + + spin_lock(&image->lock); + + /* Let's allocate the resource here rather than further up the stack as + * it avoids pushing loads of bus dependent stuff up the stack. If size + * is zero, any existing resource will be freed. + */ + retval = tsi148_alloc_resource(image, size); + if (retval) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Unable to allocate memory for " + "resource\n"); + goto err_res; + } + + if (size == 0) { + pci_base = 0; + pci_bound = 0; + vme_offset = 0; + } else { + pci_base = (unsigned long long)image->bus_resource.start; + + /* + * Bound address is a valid address for the window, adjust + * according to window granularity. + */ + pci_bound = pci_base + (size - 0x10000); + vme_offset = vme_base - pci_base; + } + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_split(pci_base, &pci_base_high, &pci_base_low); + reg_split(pci_bound, &pci_bound_high, &pci_bound_low); + reg_split(vme_offset, &vme_offset_high, &vme_offset_low); + + if (pci_base_low & 0xFFFF) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid PCI base alignment\n"); + retval = -EINVAL; + goto err_gran; + } + if (pci_bound_low & 0xFFFF) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid PCI bound alignment\n"); + retval = -EINVAL; + goto err_gran; + } + if (vme_offset_low & 0xFFFF) { + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid VME Offset " + "alignment\n"); + retval = -EINVAL; + goto err_gran; + } + + i = image->number; + + /* Disable while we are mucking around */ + temp_ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + temp_ctl &= ~TSI148_LCSR_OTAT_EN; + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + /* Setup 2eSST speeds */ + temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160; + break; + case VME_2eSST267: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267; + break; + case VME_2eSST320: + temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_BLT) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_BLT; + } + if (cycle & VME_MBLT) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_MBLT; + } + if (cycle & VME_2eVME) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; + } + if (cycle & VME_2eSST) { + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; + } + if (cycle & VME_2eSSTB) { + dev_warn(tsi148_bridge->parent, "Currently not setting " + "Broadcast Select Registers\n"); + temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; + temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB; + } + + /* Setup data width */ + temp_ctl &= ~TSI148_LCSR_OTAT_DBW_M; + switch (dwidth) { + case VME_D16: + temp_ctl |= TSI148_LCSR_OTAT_DBW_16; + break; + case VME_D32: + temp_ctl |= TSI148_LCSR_OTAT_DBW_32; + break; + default: + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid data width\n"); + retval = -EINVAL; + goto err_dwidth; + } + + /* Setup address space */ + temp_ctl &= ~TSI148_LCSR_OTAT_AMODE_M; + switch (aspace) { + case VME_A16: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A16; + break; + case VME_A24: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A24; + break; + case VME_A32: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A32; + break; + case VME_A64: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_A64; + break; + case VME_CRCSR: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_CRCSR; + break; + case VME_USER1: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER1; + break; + case VME_USER2: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER2; + break; + case VME_USER3: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER3; + break; + case VME_USER4: + temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER4; + break; + default: + spin_unlock(&image->lock); + dev_err(tsi148_bridge->parent, "Invalid address space\n"); + retval = -EINVAL; + goto err_aspace; + break; + } + + temp_ctl &= ~(3<<4); + if (cycle & VME_SUPER) + temp_ctl |= TSI148_LCSR_OTAT_SUP; + if (cycle & VME_PROG) + temp_ctl |= TSI148_LCSR_OTAT_PGM; + + /* Setup mapping */ + iowrite32be(pci_base_high, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + iowrite32be(pci_base_low, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + iowrite32be(pci_bound_high, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAU); + iowrite32be(pci_bound_low, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAL); + iowrite32be(vme_offset_high, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFU); + iowrite32be(vme_offset_low, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFL); + + /* Write ctl reg without enable */ + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + if (enabled) + temp_ctl |= TSI148_LCSR_OTAT_EN; + + iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + spin_unlock(&image->lock); + return 0; + +err_aspace: +err_dwidth: +err_gran: + tsi148_free_resource(image); +err_res: +err_window: + return retval; + +} + +/* + * Set the attributes of an outbound window. + * + * XXX Not parsing prefetch information. + */ +static int __tsi148_master_get(struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, u32 *aspace, + u32 *cycle, u32 *dwidth) +{ + unsigned int i, ctl; + unsigned int pci_base_low, pci_base_high; + unsigned int pci_bound_low, pci_bound_high; + unsigned int vme_offset_low, vme_offset_high; + + unsigned long long pci_base, pci_bound, vme_offset; + struct tsi148_driver *bridge; + + bridge = image->parent->driver_priv; + + i = image->number; + + ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + + pci_base_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + pci_base_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + pci_bound_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAU); + pci_bound_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTEAL); + vme_offset_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFU); + vme_offset_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTOFL); + + /* Convert 64-bit variables to 2x 32-bit variables */ + reg_join(pci_base_high, pci_base_low, &pci_base); + reg_join(pci_bound_high, pci_bound_low, &pci_bound); + reg_join(vme_offset_high, vme_offset_low, &vme_offset); + + *vme_base = pci_base + vme_offset; + *size = (unsigned long long)(pci_bound - pci_base) + 0x10000; + + *enabled = 0; + *aspace = 0; + *cycle = 0; + *dwidth = 0; + + if (ctl & TSI148_LCSR_OTAT_EN) + *enabled = 1; + + /* Setup address space */ + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A16) + *aspace |= VME_A16; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A24) + *aspace |= VME_A24; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A32) + *aspace |= VME_A32; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A64) + *aspace |= VME_A64; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_CRCSR) + *aspace |= VME_CRCSR; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER1) + *aspace |= VME_USER1; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER2) + *aspace |= VME_USER2; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER3) + *aspace |= VME_USER3; + if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER4) + *aspace |= VME_USER4; + + /* Setup 2eSST speeds */ + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) + *cycle |= VME_2eSST160; + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) + *cycle |= VME_2eSST267; + if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) + *cycle |= VME_2eSST320; + + /* Setup cycle types */ + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_SCT) + *cycle |= VME_SCT; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_BLT) + *cycle |= VME_BLT; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_MBLT) + *cycle |= VME_MBLT; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eVME) + *cycle |= VME_2eVME; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSST) + *cycle |= VME_2eSST; + if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSSTB) + *cycle |= VME_2eSSTB; + + if (ctl & TSI148_LCSR_OTAT_SUP) + *cycle |= VME_SUPER; + else + *cycle |= VME_USER; + + if (ctl & TSI148_LCSR_OTAT_PGM) + *cycle |= VME_PROG; + else + *cycle |= VME_DATA; + + /* Setup data width */ + if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_16) + *dwidth = VME_D16; + if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_32) + *dwidth = VME_D32; + + return 0; +} + + +static int tsi148_master_get(struct vme_master_resource *image, int *enabled, + unsigned long long *vme_base, unsigned long long *size, u32 *aspace, + u32 *cycle, u32 *dwidth) +{ + int retval; + + spin_lock(&image->lock); + + retval = __tsi148_master_get(image, enabled, vme_base, size, aspace, + cycle, dwidth); + + spin_unlock(&image->lock); + + return retval; +} + +static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval, enabled; + unsigned long long vme_base, size; + u32 aspace, cycle, dwidth; + struct vme_bus_error *vme_err = NULL; + struct vme_bridge *tsi148_bridge; + + tsi148_bridge = image->parent; + + spin_lock(&image->lock); + + memcpy_fromio(buf, image->kern_base + offset, (unsigned int)count); + retval = count; + + if (!err_chk) + goto skip_chk; + + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, + &dwidth); + + vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, + count); + if (vme_err != NULL) { + dev_err(image->parent->parent, "First VME read error detected " + "an at address 0x%llx\n", vme_err->address); + retval = vme_err->address - (vme_base + offset); + /* Clear down save errors in this address range */ + tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, + count); + } + +skip_chk: + spin_unlock(&image->lock); + + return retval; +} + + +static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf, + size_t count, loff_t offset) +{ + int retval = 0, enabled; + unsigned long long vme_base, size; + u32 aspace, cycle, dwidth; + + struct vme_bus_error *vme_err = NULL; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = image->parent; + + bridge = tsi148_bridge->driver_priv; + + spin_lock(&image->lock); + + memcpy_toio(image->kern_base + offset, buf, (unsigned int)count); + retval = count; + + /* + * Writes are posted. We need to do a read on the VME bus to flush out + * all of the writes before we check for errors. We can't guarantee + * that reading the data we have just written is safe. It is believed + * that there isn't any read, write re-ordering, so we can read any + * location in VME space, so lets read the Device ID from the tsi148's + * own registers as mapped into CR/CSR space. + * + * We check for saved errors in the written address range/space. + */ + + if (!err_chk) + goto skip_chk; + + /* + * Get window info first, to maximise the time that the buffers may + * fluch on their own + */ + __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, &cycle, + &dwidth); + + ioread16(bridge->flush_image->kern_base + 0x7F000); + + vme_err = tsi148_find_error(tsi148_bridge, aspace, vme_base + offset, + count); + if (vme_err != NULL) { + dev_warn(tsi148_bridge->parent, "First VME write error detected" + " an at address 0x%llx\n", vme_err->address); + retval = vme_err->address - (vme_base + offset); + /* Clear down save errors in this address range */ + tsi148_clear_errors(tsi148_bridge, aspace, vme_base + offset, + count); + } + +skip_chk: + spin_unlock(&image->lock); + + return retval; +} + +/* + * Perform an RMW cycle on the VME bus. + * + * Requires a previously configured master window, returns final value. + */ +static unsigned int tsi148_master_rmw(struct vme_master_resource *image, + unsigned int mask, unsigned int compare, unsigned int swap, + loff_t offset) +{ + unsigned long long pci_addr; + unsigned int pci_addr_high, pci_addr_low; + u32 tmp, result; + int i; + struct tsi148_driver *bridge; + + bridge = image->parent->driver_priv; + + /* Find the PCI address that maps to the desired VME address */ + i = image->number; + + /* Locking as we can only do one of these at a time */ + mutex_lock(&bridge->vme_rmw); + + /* Lock image */ + spin_lock(&image->lock); + + pci_addr_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAU); + pci_addr_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTSAL); + + reg_join(pci_addr_high, pci_addr_low, &pci_addr); + reg_split(pci_addr + offset, &pci_addr_high, &pci_addr_low); + + /* Configure registers */ + iowrite32be(mask, bridge->base + TSI148_LCSR_RMWEN); + iowrite32be(compare, bridge->base + TSI148_LCSR_RMWC); + iowrite32be(swap, bridge->base + TSI148_LCSR_RMWS); + iowrite32be(pci_addr_high, bridge->base + TSI148_LCSR_RMWAU); + iowrite32be(pci_addr_low, bridge->base + TSI148_LCSR_RMWAL); + + /* Enable RMW */ + tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); + tmp |= TSI148_LCSR_VMCTRL_RMWEN; + iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); + + /* Kick process off with a read to the required address. */ + result = ioread32be(image->kern_base + offset); + + /* Disable RMW */ + tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); + tmp &= ~TSI148_LCSR_VMCTRL_RMWEN; + iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); + + spin_unlock(&image->lock); + + mutex_unlock(&bridge->vme_rmw); + + return result; +} + +static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr, + u32 aspace, u32 cycle, u32 dwidth) +{ + u32 val; + + val = be32_to_cpu(*attr); + + /* Setup 2eSST speeds */ + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + val |= TSI148_LCSR_DSAT_2eSSTM_160; + break; + case VME_2eSST267: + val |= TSI148_LCSR_DSAT_2eSSTM_267; + break; + case VME_2eSST320: + val |= TSI148_LCSR_DSAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_SCT) + val |= TSI148_LCSR_DSAT_TM_SCT; + + if (cycle & VME_BLT) + val |= TSI148_LCSR_DSAT_TM_BLT; + + if (cycle & VME_MBLT) + val |= TSI148_LCSR_DSAT_TM_MBLT; + + if (cycle & VME_2eVME) + val |= TSI148_LCSR_DSAT_TM_2eVME; + + if (cycle & VME_2eSST) + val |= TSI148_LCSR_DSAT_TM_2eSST; + + if (cycle & VME_2eSSTB) { + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); + val |= TSI148_LCSR_DSAT_TM_2eSSTB; + } + + /* Setup data width */ + switch (dwidth) { + case VME_D16: + val |= TSI148_LCSR_DSAT_DBW_16; + break; + case VME_D32: + val |= TSI148_LCSR_DSAT_DBW_32; + break; + default: + dev_err(dev, "Invalid data width\n"); + return -EINVAL; + } + + /* Setup address space */ + switch (aspace) { + case VME_A16: + val |= TSI148_LCSR_DSAT_AMODE_A16; + break; + case VME_A24: + val |= TSI148_LCSR_DSAT_AMODE_A24; + break; + case VME_A32: + val |= TSI148_LCSR_DSAT_AMODE_A32; + break; + case VME_A64: + val |= TSI148_LCSR_DSAT_AMODE_A64; + break; + case VME_CRCSR: + val |= TSI148_LCSR_DSAT_AMODE_CRCSR; + break; + case VME_USER1: + val |= TSI148_LCSR_DSAT_AMODE_USER1; + break; + case VME_USER2: + val |= TSI148_LCSR_DSAT_AMODE_USER2; + break; + case VME_USER3: + val |= TSI148_LCSR_DSAT_AMODE_USER3; + break; + case VME_USER4: + val |= TSI148_LCSR_DSAT_AMODE_USER4; + break; + default: + dev_err(dev, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + val |= TSI148_LCSR_DSAT_SUP; + if (cycle & VME_PROG) + val |= TSI148_LCSR_DSAT_PGM; + + *attr = cpu_to_be32(val); + + return 0; +} + +static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr, + u32 aspace, u32 cycle, u32 dwidth) +{ + u32 val; + + val = be32_to_cpu(*attr); + + /* Setup 2eSST speeds */ + switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { + case VME_2eSST160: + val |= TSI148_LCSR_DDAT_2eSSTM_160; + break; + case VME_2eSST267: + val |= TSI148_LCSR_DDAT_2eSSTM_267; + break; + case VME_2eSST320: + val |= TSI148_LCSR_DDAT_2eSSTM_320; + break; + } + + /* Setup cycle types */ + if (cycle & VME_SCT) + val |= TSI148_LCSR_DDAT_TM_SCT; + + if (cycle & VME_BLT) + val |= TSI148_LCSR_DDAT_TM_BLT; + + if (cycle & VME_MBLT) + val |= TSI148_LCSR_DDAT_TM_MBLT; + + if (cycle & VME_2eVME) + val |= TSI148_LCSR_DDAT_TM_2eVME; + + if (cycle & VME_2eSST) + val |= TSI148_LCSR_DDAT_TM_2eSST; + + if (cycle & VME_2eSSTB) { + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); + val |= TSI148_LCSR_DDAT_TM_2eSSTB; + } + + /* Setup data width */ + switch (dwidth) { + case VME_D16: + val |= TSI148_LCSR_DDAT_DBW_16; + break; + case VME_D32: + val |= TSI148_LCSR_DDAT_DBW_32; + break; + default: + dev_err(dev, "Invalid data width\n"); + return -EINVAL; + } + + /* Setup address space */ + switch (aspace) { + case VME_A16: + val |= TSI148_LCSR_DDAT_AMODE_A16; + break; + case VME_A24: + val |= TSI148_LCSR_DDAT_AMODE_A24; + break; + case VME_A32: + val |= TSI148_LCSR_DDAT_AMODE_A32; + break; + case VME_A64: + val |= TSI148_LCSR_DDAT_AMODE_A64; + break; + case VME_CRCSR: + val |= TSI148_LCSR_DDAT_AMODE_CRCSR; + break; + case VME_USER1: + val |= TSI148_LCSR_DDAT_AMODE_USER1; + break; + case VME_USER2: + val |= TSI148_LCSR_DDAT_AMODE_USER2; + break; + case VME_USER3: + val |= TSI148_LCSR_DDAT_AMODE_USER3; + break; + case VME_USER4: + val |= TSI148_LCSR_DDAT_AMODE_USER4; + break; + default: + dev_err(dev, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + val |= TSI148_LCSR_DDAT_SUP; + if (cycle & VME_PROG) + val |= TSI148_LCSR_DDAT_PGM; + + *attr = cpu_to_be32(val); + + return 0; +} + +/* + * Add a link list descriptor to the list + * + * Note: DMA engine expects the DMA descriptor to be big endian. + */ +static int tsi148_dma_list_add(struct vme_dma_list *list, + struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) +{ + struct tsi148_dma_entry *entry, *prev; + u32 address_high, address_low, val; + struct vme_dma_pattern *pattern_attr; + struct vme_dma_pci *pci_attr; + struct vme_dma_vme *vme_attr; + int retval = 0; + struct vme_bridge *tsi148_bridge; + + tsi148_bridge = list->parent->parent; + + /* Descriptor must be aligned on 64-bit boundaries */ + entry = kmalloc(sizeof(struct tsi148_dma_entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(tsi148_bridge->parent, "Failed to allocate memory for " + "dma resource structure\n"); + retval = -ENOMEM; + goto err_mem; + } + + /* Test descriptor alignment */ + if ((unsigned long)&entry->descriptor & 0x7) { + dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 " + "byte boundary as required: %p\n", + &entry->descriptor); + retval = -EINVAL; + goto err_align; + } + + /* Given we are going to fill out the structure, we probably don't + * need to zero it, but better safe than sorry for now. + */ + memset(&entry->descriptor, 0, sizeof(struct tsi148_dma_descriptor)); + + /* Fill out source part */ + switch (src->type) { + case VME_DMA_PATTERN: + pattern_attr = src->private; + + entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern); + + val = TSI148_LCSR_DSAT_TYP_PAT; + + /* Default behaviour is 32 bit pattern */ + if (pattern_attr->type & VME_DMA_PATTERN_BYTE) + val |= TSI148_LCSR_DSAT_PSZ; + + /* It seems that the default behaviour is to increment */ + if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0) + val |= TSI148_LCSR_DSAT_NIN; + entry->descriptor.dsat = cpu_to_be32(val); + break; + case VME_DMA_PCI: + pci_attr = src->private; + + reg_split((unsigned long long)pci_attr->address, &address_high, + &address_low); + entry->descriptor.dsau = cpu_to_be32(address_high); + entry->descriptor.dsal = cpu_to_be32(address_low); + entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI); + break; + case VME_DMA_VME: + vme_attr = src->private; + + reg_split((unsigned long long)vme_attr->address, &address_high, + &address_low); + entry->descriptor.dsau = cpu_to_be32(address_high); + entry->descriptor.dsal = cpu_to_be32(address_low); + entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME); + + retval = tsi148_dma_set_vme_src_attributes( + tsi148_bridge->parent, &entry->descriptor.dsat, + vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); + if (retval < 0) + goto err_source; + break; + default: + dev_err(tsi148_bridge->parent, "Invalid source type\n"); + retval = -EINVAL; + goto err_source; + break; + } + + /* Assume last link - this will be over-written by adding another */ + entry->descriptor.dnlau = cpu_to_be32(0); + entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA); + + /* Fill out destination part */ + switch (dest->type) { + case VME_DMA_PCI: + pci_attr = dest->private; + + reg_split((unsigned long long)pci_attr->address, &address_high, + &address_low); + entry->descriptor.ddau = cpu_to_be32(address_high); + entry->descriptor.ddal = cpu_to_be32(address_low); + entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI); + break; + case VME_DMA_VME: + vme_attr = dest->private; + + reg_split((unsigned long long)vme_attr->address, &address_high, + &address_low); + entry->descriptor.ddau = cpu_to_be32(address_high); + entry->descriptor.ddal = cpu_to_be32(address_low); + entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME); + + retval = tsi148_dma_set_vme_dest_attributes( + tsi148_bridge->parent, &entry->descriptor.ddat, + vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); + if (retval < 0) + goto err_dest; + break; + default: + dev_err(tsi148_bridge->parent, "Invalid destination type\n"); + retval = -EINVAL; + goto err_dest; + break; + } + + /* Fill out count */ + entry->descriptor.dcnt = cpu_to_be32((u32)count); + + /* Add to list */ + list_add_tail(&entry->list, &list->entries); + + /* Fill out previous descriptors "Next Address" */ + if (entry->list.prev != &list->entries) { + prev = list_entry(entry->list.prev, struct tsi148_dma_entry, + list); + /* We need the bus address for the pointer */ + entry->dma_handle = dma_map_single(tsi148_bridge->parent, + &entry->descriptor, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); + + reg_split((unsigned long long)entry->dma_handle, &address_high, + &address_low); + entry->descriptor.dnlau = cpu_to_be32(address_high); + entry->descriptor.dnlal = cpu_to_be32(address_low); + + } + + return 0; + +err_dest: +err_source: +err_align: + kfree(entry); +err_mem: + return retval; +} + +/* + * Check to see if the provided DMA channel is busy. + */ +static int tsi148_dma_busy(struct vme_bridge *tsi148_bridge, int channel) +{ + u32 tmp; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + tmp = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + + if (tmp & TSI148_LCSR_DSTA_BSY) + return 0; + else + return 1; + +} + +/* + * Execute a previously generated link list + * + * XXX Need to provide control register configuration. + */ +static int tsi148_dma_list_exec(struct vme_dma_list *list) +{ + struct vme_dma_resource *ctrlr; + int channel, retval = 0; + struct tsi148_dma_entry *entry; + u32 bus_addr_high, bus_addr_low; + u32 val, dctlreg = 0; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + ctrlr = list->parent; + + tsi148_bridge = ctrlr->parent; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&ctrlr->mtx); + + channel = ctrlr->number; + + if (!list_empty(&ctrlr->running)) { + /* + * XXX We have an active DMA transfer and currently haven't + * sorted out the mechanism for "pending" DMA transfers. + * Return busy. + */ + /* Need to add to pending here */ + mutex_unlock(&ctrlr->mtx); + return -EBUSY; + } else { + list_add(&list->list, &ctrlr->running); + } + + /* Get first bus address and write into registers */ + entry = list_first_entry(&list->entries, struct tsi148_dma_entry, + list); + + entry->dma_handle = dma_map_single(tsi148_bridge->parent, + &entry->descriptor, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); + + mutex_unlock(&ctrlr->mtx); + + reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low); + + iowrite32be(bus_addr_high, bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU); + iowrite32be(bus_addr_low, bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL); + + dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DCTL); + + /* Start the operation */ + iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base + + TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); + + wait_event_interruptible(bridge->dma_queue[channel], + tsi148_dma_busy(ctrlr->parent, channel)); + + /* + * Read status register, this register is valid until we kick off a + * new transfer. + */ + val = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + + TSI148_LCSR_OFFSET_DSTA); + + if (val & TSI148_LCSR_DSTA_VBE) { + dev_err(tsi148_bridge->parent, "DMA Error. DSTA=%08X\n", val); + retval = -EIO; + } + + /* Remove list from running list */ + mutex_lock(&ctrlr->mtx); + list_del(&list->list); + mutex_unlock(&ctrlr->mtx); + + return retval; +} + +/* + * Clean up a previously generated link list + * + * We have a separate function, don't assume that the chain can't be reused. + */ +static int tsi148_dma_list_empty(struct vme_dma_list *list) +{ + struct list_head *pos, *temp; + struct tsi148_dma_entry *entry; + + struct vme_bridge *tsi148_bridge = list->parent->parent; + + /* detach and free each entry */ + list_for_each_safe(pos, temp, &list->entries) { + list_del(pos); + entry = list_entry(pos, struct tsi148_dma_entry, list); + + dma_unmap_single(tsi148_bridge->parent, entry->dma_handle, + sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); + kfree(entry); + } + + return 0; +} + +/* + * All 4 location monitors reside at the same base - this is therefore a + * system wide configuration. + * + * This does not enable the LM monitor - that should be done when the first + * callback is attached and disabled when the last callback is removed. + */ +static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base, + u32 aspace, u32 cycle) +{ + u32 lm_base_high, lm_base_low, lm_ctl = 0; + int i; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = lm->parent; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&lm->mtx); + + /* If we already have a callback attached, we can't move it! */ + for (i = 0; i < lm->monitors; i++) { + if (bridge->lm_callback[i] != NULL) { + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Location monitor " + "callback attached, can't reset\n"); + return -EBUSY; + } + } + + switch (aspace) { + case VME_A16: + lm_ctl |= TSI148_LCSR_LMAT_AS_A16; + break; + case VME_A24: + lm_ctl |= TSI148_LCSR_LMAT_AS_A24; + break; + case VME_A32: + lm_ctl |= TSI148_LCSR_LMAT_AS_A32; + break; + case VME_A64: + lm_ctl |= TSI148_LCSR_LMAT_AS_A64; + break; + default: + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Invalid address space\n"); + return -EINVAL; + break; + } + + if (cycle & VME_SUPER) + lm_ctl |= TSI148_LCSR_LMAT_SUPR ; + if (cycle & VME_USER) + lm_ctl |= TSI148_LCSR_LMAT_NPRIV; + if (cycle & VME_PROG) + lm_ctl |= TSI148_LCSR_LMAT_PGM; + if (cycle & VME_DATA) + lm_ctl |= TSI148_LCSR_LMAT_DATA; + + reg_split(lm_base, &lm_base_high, &lm_base_low); + + iowrite32be(lm_base_high, bridge->base + TSI148_LCSR_LMBAU); + iowrite32be(lm_base_low, bridge->base + TSI148_LCSR_LMBAL); + iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* Get configuration of the callback monitor and return whether it is enabled + * or disabled. + */ +static int tsi148_lm_get(struct vme_lm_resource *lm, + unsigned long long *lm_base, u32 *aspace, u32 *cycle) +{ + u32 lm_base_high, lm_base_low, lm_ctl, enabled = 0; + struct tsi148_driver *bridge; + + bridge = lm->parent->driver_priv; + + mutex_lock(&lm->mtx); + + lm_base_high = ioread32be(bridge->base + TSI148_LCSR_LMBAU); + lm_base_low = ioread32be(bridge->base + TSI148_LCSR_LMBAL); + lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); + + reg_join(lm_base_high, lm_base_low, lm_base); + + if (lm_ctl & TSI148_LCSR_LMAT_EN) + enabled = 1; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A16) + *aspace |= VME_A16; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A24) + *aspace |= VME_A24; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A32) + *aspace |= VME_A32; + + if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A64) + *aspace |= VME_A64; + + + if (lm_ctl & TSI148_LCSR_LMAT_SUPR) + *cycle |= VME_SUPER; + if (lm_ctl & TSI148_LCSR_LMAT_NPRIV) + *cycle |= VME_USER; + if (lm_ctl & TSI148_LCSR_LMAT_PGM) + *cycle |= VME_PROG; + if (lm_ctl & TSI148_LCSR_LMAT_DATA) + *cycle |= VME_DATA; + + mutex_unlock(&lm->mtx); + + return enabled; +} + +/* + * Attach a callback to a specific location monitor. + * + * Callback will be passed the monitor triggered. + */ +static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor, + void (*callback)(int)) +{ + u32 lm_ctl, tmp; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *bridge; + + tsi148_bridge = lm->parent; + + bridge = tsi148_bridge->driver_priv; + + mutex_lock(&lm->mtx); + + /* Ensure that the location monitor is configured - need PGM or DATA */ + lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); + if ((lm_ctl & (TSI148_LCSR_LMAT_PGM | TSI148_LCSR_LMAT_DATA)) == 0) { + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Location monitor not properly " + "configured\n"); + return -EINVAL; + } + + /* Check that a callback isn't already attached */ + if (bridge->lm_callback[monitor] != NULL) { + mutex_unlock(&lm->mtx); + dev_err(tsi148_bridge->parent, "Existing callback attached\n"); + return -EBUSY; + } + + /* Attach callback */ + bridge->lm_callback[monitor] = callback; + + /* Enable Location Monitor interrupt */ + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); + tmp |= TSI148_LCSR_INTEN_LMEN[monitor]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp |= TSI148_LCSR_INTEO_LMEO[monitor]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + /* Ensure that global Location Monitor Enable set */ + if ((lm_ctl & TSI148_LCSR_LMAT_EN) == 0) { + lm_ctl |= TSI148_LCSR_LMAT_EN; + iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); + } + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* + * Detach a callback function forn a specific location monitor. + */ +static int tsi148_lm_detach(struct vme_lm_resource *lm, int monitor) +{ + u32 lm_en, tmp; + struct tsi148_driver *bridge; + + bridge = lm->parent->driver_priv; + + mutex_lock(&lm->mtx); + + /* Disable Location Monitor and ensure previous interrupts are clear */ + lm_en = ioread32be(bridge->base + TSI148_LCSR_INTEN); + lm_en &= ~TSI148_LCSR_INTEN_LMEN[monitor]; + iowrite32be(lm_en, bridge->base + TSI148_LCSR_INTEN); + + tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); + tmp &= ~TSI148_LCSR_INTEO_LMEO[monitor]; + iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); + + iowrite32be(TSI148_LCSR_INTC_LMC[monitor], + bridge->base + TSI148_LCSR_INTC); + + /* Detach callback */ + bridge->lm_callback[monitor] = NULL; + + /* If all location monitors disabled, disable global Location Monitor */ + if ((lm_en & (TSI148_LCSR_INTS_LM0S | TSI148_LCSR_INTS_LM1S | + TSI148_LCSR_INTS_LM2S | TSI148_LCSR_INTS_LM3S)) == 0) { + tmp = ioread32be(bridge->base + TSI148_LCSR_LMAT); + tmp &= ~TSI148_LCSR_LMAT_EN; + iowrite32be(tmp, bridge->base + TSI148_LCSR_LMAT); + } + + mutex_unlock(&lm->mtx); + + return 0; +} + +/* + * Determine Geographical Addressing + */ +static int tsi148_slot_get(struct vme_bridge *tsi148_bridge) +{ + u32 slot = 0; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + if (!geoid) { + slot = ioread32be(bridge->base + TSI148_LCSR_VSTAT); + slot = slot & TSI148_LCSR_VSTAT_GA_M; + } else + slot = geoid; + + return (int)slot; +} + +void *tsi148_alloc_consistent(struct device *parent, size_t size, + dma_addr_t *dma) +{ + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + pdev = container_of(parent, struct pci_dev, dev); + + return pci_alloc_consistent(pdev, size, dma); +} + +void tsi148_free_consistent(struct device *parent, size_t size, void *vaddr, + dma_addr_t dma) +{ + struct pci_dev *pdev; + + /* Find pci_dev container of dev */ + pdev = container_of(parent, struct pci_dev, dev); + + pci_free_consistent(pdev, size, vaddr, dma); +} + +static int __init tsi148_init(void) +{ + return pci_register_driver(&tsi148_driver); +} + +/* + * Configure CR/CSR space + * + * Access to the CR/CSR can be configured at power-up. The location of the + * CR/CSR registers in the CR/CSR address space is determined by the boards + * Auto-ID or Geographic address. This function ensures that the window is + * enabled at an offset consistent with the boards geopgraphic address. + * + * Each board has a 512kB window, with the highest 4kB being used for the + * boards registers, this means there is a fix length 508kB window which must + * be mapped onto PCI memory. + */ +static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge, + struct pci_dev *pdev) +{ + u32 cbar, crat, vstat; + u32 crcsr_bus_high, crcsr_bus_low; + int retval; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + /* Allocate mem for CR/CSR image */ + bridge->crcsr_kernel = pci_alloc_consistent(pdev, VME_CRCSR_BUF_SIZE, + &bridge->crcsr_bus); + if (bridge->crcsr_kernel == NULL) { + dev_err(tsi148_bridge->parent, "Failed to allocate memory for " + "CR/CSR image\n"); + return -ENOMEM; + } + + memset(bridge->crcsr_kernel, 0, VME_CRCSR_BUF_SIZE); + + reg_split(bridge->crcsr_bus, &crcsr_bus_high, &crcsr_bus_low); + + iowrite32be(crcsr_bus_high, bridge->base + TSI148_LCSR_CROU); + iowrite32be(crcsr_bus_low, bridge->base + TSI148_LCSR_CROL); + + /* Ensure that the CR/CSR is configured at the correct offset */ + cbar = ioread32be(bridge->base + TSI148_CBAR); + cbar = (cbar & TSI148_CRCSR_CBAR_M)>>3; + + vstat = tsi148_slot_get(tsi148_bridge); + + if (cbar != vstat) { + cbar = vstat; + dev_info(tsi148_bridge->parent, "Setting CR/CSR offset\n"); + iowrite32be(cbar<<3, bridge->base + TSI148_CBAR); + } + dev_info(tsi148_bridge->parent, "CR/CSR Offset: %d\n", cbar); + + crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); + if (crat & TSI148_LCSR_CRAT_EN) { + dev_info(tsi148_bridge->parent, "Enabling CR/CSR space\n"); + iowrite32be(crat | TSI148_LCSR_CRAT_EN, + bridge->base + TSI148_LCSR_CRAT); + } else + dev_info(tsi148_bridge->parent, "CR/CSR already enabled\n"); + + /* If we want flushed, error-checked writes, set up a window + * over the CR/CSR registers. We read from here to safely flush + * through VME writes. + */ + if (err_chk) { + retval = tsi148_master_set(bridge->flush_image, 1, + (vstat * 0x80000), 0x80000, VME_CRCSR, VME_SCT, + VME_D16); + if (retval) + dev_err(tsi148_bridge->parent, "Configuring flush image" + " failed\n"); + } + + return 0; + +} + +static void tsi148_crcsr_exit(struct vme_bridge *tsi148_bridge, + struct pci_dev *pdev) +{ + u32 crat; + struct tsi148_driver *bridge; + + bridge = tsi148_bridge->driver_priv; + + /* Turn off CR/CSR space */ + crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); + iowrite32be(crat & ~TSI148_LCSR_CRAT_EN, + bridge->base + TSI148_LCSR_CRAT); + + /* Free image */ + iowrite32be(0, bridge->base + TSI148_LCSR_CROU); + iowrite32be(0, bridge->base + TSI148_LCSR_CROL); + + pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel, + bridge->crcsr_bus); +} + +static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int retval, i, master_num; + u32 data; + struct list_head *pos = NULL; + struct vme_bridge *tsi148_bridge; + struct tsi148_driver *tsi148_device; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + struct vme_lm_resource *lm; + + /* If we want to support more than one of each bridge, we need to + * dynamically generate this so we get one per device + */ + tsi148_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL); + if (tsi148_bridge == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_struct; + } + + tsi148_device = kzalloc(sizeof(struct tsi148_driver), GFP_KERNEL); + if (tsi148_device == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for device " + "structure\n"); + retval = -ENOMEM; + goto err_driver; + } + + tsi148_bridge->driver_priv = tsi148_device; + + /* Enable the device */ + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "Unable to enable device\n"); + goto err_enable; + } + + /* Map Registers */ + retval = pci_request_regions(pdev, driver_name); + if (retval) { + dev_err(&pdev->dev, "Unable to reserve resources\n"); + goto err_resource; + } + + /* map registers in BAR 0 */ + tsi148_device->base = ioremap_nocache(pci_resource_start(pdev, 0), + 4096); + if (!tsi148_device->base) { + dev_err(&pdev->dev, "Unable to remap CRG region\n"); + retval = -EIO; + goto err_remap; + } + + /* Check to see if the mapping worked out */ + data = ioread32(tsi148_device->base + TSI148_PCFS_ID) & 0x0000FFFF; + if (data != PCI_VENDOR_ID_TUNDRA) { + dev_err(&pdev->dev, "CRG region check failed\n"); + retval = -EIO; + goto err_test; + } + + /* Initialize wait queues & mutual exclusion flags */ + init_waitqueue_head(&tsi148_device->dma_queue[0]); + init_waitqueue_head(&tsi148_device->dma_queue[1]); + init_waitqueue_head(&tsi148_device->iack_queue); + mutex_init(&tsi148_device->vme_int); + mutex_init(&tsi148_device->vme_rmw); + + tsi148_bridge->parent = &pdev->dev; + strcpy(tsi148_bridge->name, driver_name); + + /* Setup IRQ */ + retval = tsi148_irq_init(tsi148_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Initialization failed.\n"); + goto err_irq; + } + + /* If we are going to flush writes, we need to read from the VME bus. + * We need to do this safely, thus we read the devices own CR/CSR + * register. To do this we must set up a window in CR/CSR space and + * hence have one less master window resource available. + */ + master_num = TSI148_MAX_MASTER; + if (err_chk) { + master_num--; + + tsi148_device->flush_image = + kmalloc(sizeof(struct vme_master_resource), GFP_KERNEL); + if (tsi148_device->flush_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "flush resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + tsi148_device->flush_image->parent = tsi148_bridge; + spin_lock_init(&tsi148_device->flush_image->lock); + tsi148_device->flush_image->locked = 1; + tsi148_device->flush_image->number = master_num; + tsi148_device->flush_image->address_attr = VME_A16 | VME_A24 | + VME_A32 | VME_A64; + tsi148_device->flush_image->cycle_attr = VME_SCT | VME_BLT | + VME_MBLT | VME_2eVME | VME_2eSST | VME_2eSSTB | + VME_2eSST160 | VME_2eSST267 | VME_2eSST320 | VME_SUPER | + VME_USER | VME_PROG | VME_DATA; + tsi148_device->flush_image->width_attr = VME_D16 | VME_D32; + memset(&tsi148_device->flush_image->bus_resource, 0, + sizeof(struct resource)); + tsi148_device->flush_image->kern_base = NULL; + } + + /* Add master windows to list */ + INIT_LIST_HEAD(&tsi148_bridge->master_resources); + for (i = 0; i < master_num; i++) { + master_image = kmalloc(sizeof(struct vme_master_resource), + GFP_KERNEL); + if (master_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "master resource structure\n"); + retval = -ENOMEM; + goto err_master; + } + master_image->parent = tsi148_bridge; + spin_lock_init(&master_image->lock); + master_image->locked = 0; + master_image->number = i; + master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_A64; + master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | + VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_PROG | VME_DATA; + master_image->width_attr = VME_D16 | VME_D32; + memset(&master_image->bus_resource, 0, + sizeof(struct resource)); + master_image->kern_base = NULL; + list_add_tail(&master_image->list, + &tsi148_bridge->master_resources); + } + + /* Add slave windows to list */ + INIT_LIST_HEAD(&tsi148_bridge->slave_resources); + for (i = 0; i < TSI148_MAX_SLAVE; i++) { + slave_image = kmalloc(sizeof(struct vme_slave_resource), + GFP_KERNEL); + if (slave_image == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "slave resource structure\n"); + retval = -ENOMEM; + goto err_slave; + } + slave_image->parent = tsi148_bridge; + mutex_init(&slave_image->mtx); + slave_image->locked = 0; + slave_image->number = i; + slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | + VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | + VME_USER3 | VME_USER4; + slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | + VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | + VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | + VME_PROG | VME_DATA; + list_add_tail(&slave_image->list, + &tsi148_bridge->slave_resources); + } + + /* Add dma engines to list */ + INIT_LIST_HEAD(&tsi148_bridge->dma_resources); + for (i = 0; i < TSI148_MAX_DMA; i++) { + dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource), + GFP_KERNEL); + if (dma_ctrlr == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "dma resource structure\n"); + retval = -ENOMEM; + goto err_dma; + } + dma_ctrlr->parent = tsi148_bridge; + mutex_init(&dma_ctrlr->mtx); + dma_ctrlr->locked = 0; + dma_ctrlr->number = i; + dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM | + VME_DMA_MEM_TO_VME | VME_DMA_VME_TO_VME | + VME_DMA_MEM_TO_MEM | VME_DMA_PATTERN_TO_VME | + VME_DMA_PATTERN_TO_MEM; + INIT_LIST_HEAD(&dma_ctrlr->pending); + INIT_LIST_HEAD(&dma_ctrlr->running); + list_add_tail(&dma_ctrlr->list, + &tsi148_bridge->dma_resources); + } + + /* Add location monitor to list */ + INIT_LIST_HEAD(&tsi148_bridge->lm_resources); + lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); + if (lm == NULL) { + dev_err(&pdev->dev, "Failed to allocate memory for " + "location monitor resource structure\n"); + retval = -ENOMEM; + goto err_lm; + } + lm->parent = tsi148_bridge; + mutex_init(&lm->mtx); + lm->locked = 0; + lm->number = 1; + lm->monitors = 4; + list_add_tail(&lm->list, &tsi148_bridge->lm_resources); + + tsi148_bridge->slave_get = tsi148_slave_get; + tsi148_bridge->slave_set = tsi148_slave_set; + tsi148_bridge->master_get = tsi148_master_get; + tsi148_bridge->master_set = tsi148_master_set; + tsi148_bridge->master_read = tsi148_master_read; + tsi148_bridge->master_write = tsi148_master_write; + tsi148_bridge->master_rmw = tsi148_master_rmw; + tsi148_bridge->dma_list_add = tsi148_dma_list_add; + tsi148_bridge->dma_list_exec = tsi148_dma_list_exec; + tsi148_bridge->dma_list_empty = tsi148_dma_list_empty; + tsi148_bridge->irq_set = tsi148_irq_set; + tsi148_bridge->irq_generate = tsi148_irq_generate; + tsi148_bridge->lm_set = tsi148_lm_set; + tsi148_bridge->lm_get = tsi148_lm_get; + tsi148_bridge->lm_attach = tsi148_lm_attach; + tsi148_bridge->lm_detach = tsi148_lm_detach; + tsi148_bridge->slot_get = tsi148_slot_get; + tsi148_bridge->alloc_consistent = tsi148_alloc_consistent; + tsi148_bridge->free_consistent = tsi148_free_consistent; + + data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); + dev_info(&pdev->dev, "Board is%s the VME system controller\n", + (data & TSI148_LCSR_VSTAT_SCONS) ? "" : " not"); + if (!geoid) + dev_info(&pdev->dev, "VME geographical address is %d\n", + data & TSI148_LCSR_VSTAT_GA_M); + else + dev_info(&pdev->dev, "VME geographical address is set to %d\n", + geoid); + + dev_info(&pdev->dev, "VME Write and flush and error check is %s\n", + err_chk ? "enabled" : "disabled"); + + if (tsi148_crcsr_init(tsi148_bridge, pdev)) { + dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); + goto err_crcsr; + } + + retval = vme_register_bridge(tsi148_bridge); + if (retval != 0) { + dev_err(&pdev->dev, "Chip Registration failed.\n"); + goto err_reg; + } + + pci_set_drvdata(pdev, tsi148_bridge); + + /* Clear VME bus "board fail", and "power-up reset" lines */ + data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); + data &= ~TSI148_LCSR_VSTAT_BRDFL; + data |= TSI148_LCSR_VSTAT_CPURST; + iowrite32be(data, tsi148_device->base + TSI148_LCSR_VSTAT); + + return 0; + +err_reg: + tsi148_crcsr_exit(tsi148_bridge, pdev); +err_crcsr: +err_lm: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->lm_resources) { + lm = list_entry(pos, struct vme_lm_resource, list); + list_del(pos); + kfree(lm); + } +err_dma: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->dma_resources) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } +err_slave: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->slave_resources) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } +err_master: + /* resources are stored in link list */ + list_for_each(pos, &tsi148_bridge->master_resources) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + tsi148_irq_exit(tsi148_bridge, pdev); +err_irq: +err_test: + iounmap(tsi148_device->base); +err_remap: + pci_release_regions(pdev); +err_resource: + pci_disable_device(pdev); +err_enable: + kfree(tsi148_device); +err_driver: + kfree(tsi148_bridge); +err_struct: + return retval; + +} + +static void tsi148_remove(struct pci_dev *pdev) +{ + struct list_head *pos = NULL; + struct list_head *tmplist; + struct vme_master_resource *master_image; + struct vme_slave_resource *slave_image; + struct vme_dma_resource *dma_ctrlr; + int i; + struct tsi148_driver *bridge; + struct vme_bridge *tsi148_bridge = pci_get_drvdata(pdev); + + bridge = tsi148_bridge->driver_priv; + + + dev_dbg(&pdev->dev, "Driver is being unloaded.\n"); + + /* + * Shutdown all inbound and outbound windows. + */ + for (i = 0; i < 8; i++) { + iowrite32be(0, bridge->base + TSI148_LCSR_IT[i] + + TSI148_LCSR_OFFSET_ITAT); + iowrite32be(0, bridge->base + TSI148_LCSR_OT[i] + + TSI148_LCSR_OFFSET_OTAT); + } + + /* + * Shutdown Location monitor. + */ + iowrite32be(0, bridge->base + TSI148_LCSR_LMAT); + + /* + * Shutdown CRG map. + */ + iowrite32be(0, bridge->base + TSI148_LCSR_CSRAT); + + /* + * Clear error status. + */ + iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_EDPAT); + iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_VEAT); + iowrite32be(0x07000700, bridge->base + TSI148_LCSR_PSTAT); + + /* + * Remove VIRQ interrupt (if any) + */ + if (ioread32be(bridge->base + TSI148_LCSR_VICR) & 0x800) + iowrite32be(0x8000, bridge->base + TSI148_LCSR_VICR); + + /* + * Map all Interrupts to PCI INTA + */ + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM1); + iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM2); + + tsi148_irq_exit(tsi148_bridge, pdev); + + vme_unregister_bridge(tsi148_bridge); + + tsi148_crcsr_exit(tsi148_bridge, pdev); + + /* resources are stored in link list */ + list_for_each_safe(pos, tmplist, &tsi148_bridge->dma_resources) { + dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); + list_del(pos); + kfree(dma_ctrlr); + } + + /* resources are stored in link list */ + list_for_each_safe(pos, tmplist, &tsi148_bridge->slave_resources) { + slave_image = list_entry(pos, struct vme_slave_resource, list); + list_del(pos); + kfree(slave_image); + } + + /* resources are stored in link list */ + list_for_each_safe(pos, tmplist, &tsi148_bridge->master_resources) { + master_image = list_entry(pos, struct vme_master_resource, + list); + list_del(pos); + kfree(master_image); + } + + iounmap(bridge->base); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + kfree(tsi148_bridge->driver_priv); + + kfree(tsi148_bridge); +} + +static void __exit tsi148_exit(void) +{ + pci_unregister_driver(&tsi148_driver); +} + +MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes"); +module_param(err_chk, bool, 0); + +MODULE_PARM_DESC(geoid, "Override geographical addressing"); +module_param(geoid, int, 0); + +MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge"); +MODULE_LICENSE("GPL"); + +module_init(tsi148_init); +module_exit(tsi148_exit); |