aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/config.c7
-rw-r--r--drivers/usb/core/hub.c54
-rw-r--r--drivers/usb/host/ehci.h18
-rw-r--r--drivers/usb/host/xhci.c3
-rw-r--r--drivers/usb/serial/cypress_m8.h2
-rw-r--r--drivers/usb/serial/ftdi_sio.c17
-rw-r--r--drivers/usb/serial/option.c15
-rw-r--r--drivers/usb/serial/pl2303.c33
-rw-r--r--drivers/usb/storage/unusual_devs.h7
9 files changed, 99 insertions, 57 deletions
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index a6b2cabe793..548d1996590 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -651,10 +651,6 @@ void usb_destroy_configuration(struct usb_device *dev)
*
* hub-only!! ... and only in reset path, or usb_new_device()
* (used by real hubs and virtual root hubs)
- *
- * NOTE: if this is a WUSB device and is not authorized, we skip the
- * whole thing. A non-authorized USB device has no
- * configurations.
*/
int usb_get_configuration(struct usb_device *dev)
{
@@ -666,8 +662,6 @@ int usb_get_configuration(struct usb_device *dev)
struct usb_config_descriptor *desc;
cfgno = 0;
- if (dev->authorized == 0) /* Not really an error */
- goto out_not_authorized;
result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
@@ -751,7 +745,6 @@ int usb_get_configuration(struct usb_device *dev)
err:
kfree(desc);
-out_not_authorized:
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4d25bff2dac..e604645a129 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1605,7 +1605,7 @@ static void hub_disconnect(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata(intf);
struct usb_device *hdev = interface_to_usbdev(intf);
- int i;
+ int port1;
/* Take the hub off the event list and don't let it be added again */
spin_lock_irq(&hub_event_lock);
@@ -1620,11 +1620,15 @@ static void hub_disconnect(struct usb_interface *intf)
hub->error = 0;
hub_quiesce(hub, HUB_DISCONNECT);
- usb_set_intfdata (intf, NULL);
+ /* Avoid races with recursively_mark_NOTATTACHED() */
+ spin_lock_irq(&device_state_lock);
+ port1 = hdev->maxchild;
+ hdev->maxchild = 0;
+ usb_set_intfdata(intf, NULL);
+ spin_unlock_irq(&device_state_lock);
- for (i = 0; i < hdev->maxchild; i++)
- usb_hub_remove_port_device(hub, i + 1);
- hub->hdev->maxchild = 0;
+ for (; port1 > 0; --port1)
+ usb_hub_remove_port_device(hub, port1);
if (hub->hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
@@ -2227,18 +2231,13 @@ static int usb_enumerate_device(struct usb_device *udev)
return err;
}
}
- if (udev->wusb == 1 && udev->authorized == 0) {
- udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- }
- else {
- /* read the standard strings and cache them if present */
- udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
- udev->manufacturer = usb_cache_string(udev,
- udev->descriptor.iManufacturer);
- udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
- }
+
+ /* read the standard strings and cache them if present */
+ udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+ udev->manufacturer = usb_cache_string(udev,
+ udev->descriptor.iManufacturer);
+ udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+
err = usb_enumerate_device_otg(udev);
if (err < 0)
return err;
@@ -2417,16 +2416,6 @@ int usb_deauthorize_device(struct usb_device *usb_dev)
usb_dev->authorized = 0;
usb_set_configuration(usb_dev, -1);
- kfree(usb_dev->product);
- usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- kfree(usb_dev->manufacturer);
- usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- kfree(usb_dev->serial);
- usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-
- usb_destroy_configuration(usb_dev);
- usb_dev->descriptor.bNumConfigurations = 0;
-
out_unauthorized:
usb_unlock_device(usb_dev);
return 0;
@@ -2454,17 +2443,7 @@ int usb_authorize_device(struct usb_device *usb_dev)
goto error_device_descriptor;
}
- kfree(usb_dev->product);
- usb_dev->product = NULL;
- kfree(usb_dev->manufacturer);
- usb_dev->manufacturer = NULL;
- kfree(usb_dev->serial);
- usb_dev->serial = NULL;
-
usb_dev->authorized = 1;
- result = usb_enumerate_device(usb_dev);
- if (result < 0)
- goto error_enumerate;
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
@@ -2480,7 +2459,6 @@ int usb_authorize_device(struct usb_device *usb_dev)
}
dev_info(&usb_dev->dev, "authorized to connect\n");
-error_enumerate:
error_device_descriptor:
usb_autosuspend_device(usb_dev);
error_autoresume:
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 7c978b23520..03322d9c70d 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -200,6 +200,7 @@ struct ehci_hcd { /* one per controller */
unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
unsigned need_oc_pp_cycle:1; /* MPC834X port power */
+ unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
@@ -675,6 +676,18 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
#endif
}
+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ehci_writel(const unsigned int val,
+ volatile __u32 __iomem *addr)
+{
+ __asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
+}
+#else
+static inline void imx28_ehci_writel(const unsigned int val,
+ volatile __u32 __iomem *addr)
+{
+}
+#endif
static inline void ehci_writel(const struct ehci_hcd *ehci,
const unsigned int val, __u32 __iomem *regs)
{
@@ -683,7 +696,10 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,
writel_be(val, regs) :
writel(val, regs);
#else
- writel(val, regs);
+ if (ehci->imx28_write_fix)
+ imx28_ehci_writel(val, regs);
+ else
+ writel(val, regs);
#endif
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 4a5251f3614..a90819b8322 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -315,6 +315,9 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ if (xhci->quirks & XHCI_PLAT)
+ return;
+
xhci_free_irq(xhci);
if (xhci->msix_entries) {
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index b461311a2ae..ce13e61b7d5 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -63,7 +63,7 @@
#define UART_DSR 0x20 /* data set ready - flow control - device to host */
#define CONTROL_RTS 0x10 /* request to send - flow control - host to device */
#define UART_CTS 0x10 /* clear to send - flow control - device to host */
-#define UART_RI 0x10 /* ring indicator - modem - device to host */
+#define UART_RI 0x80 /* ring indicator - modem - device to host */
#define UART_CD 0x40 /* carrier detect - modem - device to host */
#define CYP_ERROR 0x08 /* received from input report - device to host */
/* Note - the below has nothing to do with the "feature report" reset */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 92549cc4665..089248c1d59 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2132,10 +2132,20 @@ static void ftdi_set_termios(struct tty_struct *tty,
}
/*
- * All FTDI UART chips are limited to CS7/8. We won't pretend to
+ * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
* support CS5/6 and revert the CSIZE setting instead.
+ *
+ * CS5 however is used to control some smartcard readers which abuse
+ * this limitation to switch modes. Original FTDI chips fall back to
+ * eight data bits.
+ *
+ * TODO: Implement a quirk to only allow this with mentioned
+ * readers. One I know of (Argolis Smartreader V1)
+ * returns "USB smartcard server" as iInterface string.
+ * The vendor didn't bother with a custom VID/PID of
+ * course.
*/
- if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+ if (C_CSIZE(tty) == CS6) {
dev_warn(ddev, "requested CSIZE setting not supported\n");
termios->c_cflag &= ~CSIZE;
@@ -2182,6 +2192,9 @@ no_skip:
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
switch (cflag & CSIZE) {
+ case CS5:
+ dev_dbg(ddev, "Setting CS5 quirk\n");
+ break;
case CS7:
urb_value |= 7;
dev_dbg(ddev, "Setting CS7\n");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index cc7a2415449..5c86f57e4af 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -320,6 +320,9 @@ static void option_instat_callback(struct urb *urb);
* It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+/* iBall 3.5G connect wireless modem */
+#define IBALL_3_5G_CONNECT 0x9605
+
/* Zoom */
#define ZOOM_PRODUCT_4597 0x9607
@@ -1447,6 +1450,17 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff90, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff91, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
/* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
@@ -1489,6 +1503,7 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&four_g_w14_blacklist
},
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
/* Pirelli */
{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 5e39f5c4941..4471f464ca2 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -141,6 +141,8 @@ struct pl2303_private {
spinlock_t lock;
u8 line_control;
u8 line_status;
+
+ u8 line_settings[7];
};
static int pl2303_vendor_read(__u16 value, __u16 index,
@@ -280,10 +282,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
int baud_floor, baud_ceil;
int k;
- /* The PL2303 is reported to lose bytes if you change
- serial settings even to the same values as before. Thus
- we actually need to filter in this specific case */
-
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
@@ -422,10 +420,29 @@ static void pl2303_set_termios(struct tty_struct *tty,
dev_dbg(&port->dev, "parity = none\n");
}
- i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
- 0, 0, buf, 7, 100);
- dev_dbg(&port->dev, "0x21:0x20:0:0 %d\n", i);
+ /*
+ * Some PL2303 are known to lose bytes if you change serial settings
+ * even to the same values as before. Thus we actually need to filter
+ * in this specific case.
+ *
+ * Note that the tty_termios_hw_change check above is not sufficient
+ * as a previously requested baud rate may differ from the one
+ * actually used (and stored in old_termios).
+ *
+ * NOTE: No additional locking needed for line_settings as it is
+ * only used in set_termios, which is serialised against itself.
+ */
+ if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
+ i = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+
+ dev_dbg(&port->dev, "0x21:0x20:0:0 %d\n", i);
+
+ if (i == 7)
+ memcpy(priv->line_settings, buf, 7);
+ }
/* change control lines if we are switching to or from B0 */
spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index de32cfa5bfa..ad06255c2ad 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -234,6 +234,13 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
+/* Patch submitted by Mikhail Zolotaryov <lebon@lebon.org.ua> */
+UNUSUAL_DEV( 0x0421, 0x06aa, 0x1110, 0x1110,
+ "Nokia",
+ "502",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-25 03:52:17 +0000