diff options
Diffstat (limited to 'drivers/scsi/pm8001')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.c | 36 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 28 |
2 files changed, 29 insertions, 35 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index bf54aafc2d7..b8dd05074ab 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -47,7 +47,7 @@ * read_main_config_table - read the configure table and save it. * @pm8001_ha: our hba card information */ -static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha) +static void read_main_config_table(struct pm8001_hba_info *pm8001_ha) { void __iomem *address = pm8001_ha->main_cfg_tbl_addr; pm8001_ha->main_cfg_tbl.signature = pm8001_mr32(address, 0x00); @@ -83,8 +83,7 @@ static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha) * read_general_status_table - read the general status table and save it. * @pm8001_ha: our hba card information */ -static void __devinit -read_general_status_table(struct pm8001_hba_info *pm8001_ha) +static void read_general_status_table(struct pm8001_hba_info *pm8001_ha) { void __iomem *address = pm8001_ha->general_stat_tbl_addr; pm8001_ha->gs_tbl.gst_len_mpistate = pm8001_mr32(address, 0x00); @@ -118,8 +117,7 @@ read_general_status_table(struct pm8001_hba_info *pm8001_ha) * read_inbnd_queue_table - read the inbound queue table and save it. * @pm8001_ha: our hba card information */ -static void __devinit -read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha) +static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha) { int inbQ_num = 1; int i; @@ -137,8 +135,7 @@ read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha) * read_outbnd_queue_table - read the outbound queue table and save it. * @pm8001_ha: our hba card information */ -static void __devinit -read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha) +static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha) { int outbQ_num = 1; int i; @@ -156,8 +153,7 @@ read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha) * init_default_table_values - init the default table. * @pm8001_ha: our hba card information */ -static void __devinit -init_default_table_values(struct pm8001_hba_info *pm8001_ha) +static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) { int qn = 1; int i; @@ -250,8 +246,7 @@ init_default_table_values(struct pm8001_hba_info *pm8001_ha) * update_main_config_table - update the main default table to the HBA. * @pm8001_ha: our hba card information */ -static void __devinit -update_main_config_table(struct pm8001_hba_info *pm8001_ha) +static void update_main_config_table(struct pm8001_hba_info *pm8001_ha) { void __iomem *address = pm8001_ha->main_cfg_tbl_addr; pm8001_mw32(address, 0x24, @@ -297,8 +292,8 @@ update_main_config_table(struct pm8001_hba_info *pm8001_ha) * update_inbnd_queue_table - update the inbound queue table to the HBA. * @pm8001_ha: our hba card information */ -static void __devinit -update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) +static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, + int number) { void __iomem *address = pm8001_ha->inbnd_q_tbl_addr; u16 offset = number * 0x20; @@ -318,8 +313,8 @@ update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) * update_outbnd_queue_table - update the outbound queue table to the HBA. * @pm8001_ha: our hba card information */ -static void __devinit -update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) +static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, + int number) { void __iomem *address = pm8001_ha->outbnd_q_tbl_addr; u16 offset = number * 0x24; @@ -370,8 +365,8 @@ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) * @pm8001_ha: our hba card information * @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc. */ -static void __devinit -mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) +static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, + u32 SSCbit) { u32 value, offset, i; unsigned long flags; @@ -438,9 +433,8 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) * @pm8001_ha: our hba card information * @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us. */ -static void __devinit -mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha, - u32 interval) +static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha, + u32 interval) { u32 offset; u32 value; @@ -601,7 +595,7 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) * pm8001_chip_init - the main init function that initialize whole PM8001 chip. * @pm8001_ha: our hba card information */ -static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) +static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) { /* check the firmware status */ if (-1 == check_fw_ready(pm8001_ha)) { diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 0267c22f874..4c9fe733fe8 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -104,8 +104,7 @@ static struct sas_domain_function_template pm8001_transport_ops = { *@pm8001_ha: our hba structure. *@phy_id: phy id. */ -static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, - int phy_id) +static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id) { struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; struct asd_sas_phy *sas_phy = &phy->sas_phy; @@ -195,7 +194,7 @@ static irqreturn_t pm8001_interrupt(int irq, void *opaque) * @pm8001_ha:our hba structure. * */ -static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha) +static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha) { int i; spin_lock_init(&pm8001_ha->lock); @@ -360,8 +359,9 @@ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha) * @ent: ent * @shost: scsi host struct which has been initialized before. */ -static struct pm8001_hba_info *__devinit -pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost) +static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, + u32 chip_id, + struct Scsi_Host *shost) { struct pm8001_hba_info *pm8001_ha; struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); @@ -433,8 +433,8 @@ static int pci_go_44(struct pci_dev *pdev) * @shost: scsi host which has been allocated outside. * @chip_info: our ha struct. */ -static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost, - const struct pm8001_chip_info *chip_info) +static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost, + const struct pm8001_chip_info *chip_info) { int phy_nr, port_nr; struct asd_sas_phy **arr_phy; @@ -479,8 +479,8 @@ exit: * @shost: scsi host which has been allocated outside * @chip_info: our ha struct. */ -static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost, - const struct pm8001_chip_info *chip_info) +static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, + const struct pm8001_chip_info *chip_info) { int i = 0; struct pm8001_hba_info *pm8001_ha; @@ -615,8 +615,8 @@ intx: * pci driver it is invoked, all struct an hardware initilization should be done * here, also, register interrupt */ -static int __devinit pm8001_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) +static int pm8001_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { unsigned int rc; u32 pci_reg; @@ -707,7 +707,7 @@ err_out_enable: return rc; } -static void __devexit pm8001_pci_remove(struct pci_dev *pdev) +static void pm8001_pci_remove(struct pci_dev *pdev) { struct sas_ha_struct *sha = pci_get_drvdata(pdev); struct pm8001_hba_info *pm8001_ha; @@ -842,7 +842,7 @@ err_out_enable: return rc; } -static struct pci_device_id __devinitdata pm8001_pci_table[] = { +static struct pci_device_id pm8001_pci_table[] = { { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 }, @@ -857,7 +857,7 @@ static struct pci_driver pm8001_pci_driver = { .name = DRV_NAME, .id_table = pm8001_pci_table, .probe = pm8001_pci_probe, - .remove = __devexit_p(pm8001_pci_remove), + .remove = pm8001_pci_remove, .suspend = pm8001_pci_suspend, .resume = pm8001_pci_resume, }; |