diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/pcie/trans.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/pcie/trans.c | 29 |
1 files changed, 21 insertions, 8 deletions
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 50ba0a468f9..4088dd5e924 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -207,6 +207,22 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans) } /* + * Enable the oscillator to count wake up time for L1 exit. This + * consumes slightly more power (100uA) - but allows to be sure + * that we wake up from L1 on time. + * + * This looks weird: read twice the same register, discard the + * value, set a bit, and yet again, read that same register + * just to discard the value. But that's the way the hardware + * seems to like it. + */ + iwl_read_prph(trans, OSC_CLK); + iwl_read_prph(trans, OSC_CLK); + iwl_set_bits_prph(trans, OSC_CLK, OSC_CLK_FORCE_CONTROL); + iwl_read_prph(trans, OSC_CLK); + iwl_read_prph(trans, OSC_CLK); + + /* * Enable DMA clock and wait for it to stabilize. * * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits @@ -276,9 +292,6 @@ static int iwl_pcie_nic_init(struct iwl_trans *trans) spin_lock_irqsave(&trans_pcie->irq_lock, flags); iwl_pcie_apm_init(trans); - /* Set interrupt coalescing calibration timer to default (512 usecs) */ - iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); iwl_pcie_set_pwr(trans, false); @@ -1481,16 +1494,16 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, spin_lock_init(&trans_pcie->reg_lock); init_waitqueue_head(&trans_pcie->ucode_write_waitq); - /* W/A - seems to solve weird behavior. We need to remove this if we - * don't want to stay in L1 all the time. This wastes a lot of power */ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - if (pci_enable_device(pdev)) { err = -ENODEV; goto out_no_pci; } + /* W/A - seems to solve weird behavior. We need to remove this if we + * don't want to stay in L1 all the time. This wastes a lot of power */ + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | + PCIE_LINK_STATE_CLKPM); + pci_set_master(pdev); err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); |