diff options
Diffstat (limited to 'drivers/net/smc-ultra.c')
| -rw-r--r-- | drivers/net/smc-ultra.c | 622 |
1 files changed, 0 insertions, 622 deletions
diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c deleted file mode 100644 index ba44ede2919..00000000000 --- a/drivers/net/smc-ultra.c +++ /dev/null @@ -1,622 +0,0 @@ -/* smc-ultra.c: A SMC Ultra ethernet driver for linux. */ -/* - This is a driver for the SMC Ultra and SMC EtherEZ ISA ethercards. - - Written 1993-1998 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - This driver uses the cards in the 8390-compatible mode. - Most of the run-time complexity is handled by the generic code in - 8390.c. The code in this file is responsible for - - ultra_probe() Detecting and initializing the card. - ultra_probe1() - ultra_probe_isapnp() - - ultra_open() The card-specific details of starting, stopping - ultra_reset_8390() and resetting the 8390 NIC core. - ultra_close() - - ultra_block_input() Routines for reading and writing blocks of - ultra_block_output() packet buffer memory. - ultra_pio_input() - ultra_pio_output() - - This driver enables the shared memory only when doing the actual data - transfers to avoid a bug in early version of the card that corrupted - data transferred by a AHA1542. - - This driver now supports the programmed-I/O (PIO) data transfer mode of - the EtherEZ. It does not use the non-8390-compatible "Altego" mode. - That support (if available) is in smc-ez.c. - - Changelog: - - Paul Gortmaker : multiple card support for module users. - Donald Becker : 4/17/96 PIO support, minor potential problems avoided. - Donald Becker : 6/6/96 correctly set auto-wrap bit. - Alexander Sotirov : 1/20/01 Added support for ISAPnP cards - - Note about the ISA PnP support: - - This driver can not autoprobe for more than one SMC EtherEZ PnP card. - You have to configure the second card manually through the /proc/isapnp - interface and then load the module with an explicit io=0x___ option. -*/ - -static const char version[] = - "smc-ultra.c:v2.02 2/3/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/isapnp.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> - -#include "8390.h" - -#define DRV_NAME "smc-ultra" - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int ultra_portlist[] __initdata = -{0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380, 0}; - -static int ultra_probe1(struct net_device *dev, int ioaddr); - -#ifdef __ISAPNP__ -static int ultra_probe_isapnp(struct net_device *dev); -#endif - -static int ultra_open(struct net_device *dev); -static void ultra_reset_8390(struct net_device *dev); -static void ultra_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void ultra_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void ultra_block_output(struct net_device *dev, int count, - const unsigned char *buf, const int start_page); -static void ultra_pio_get_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static void ultra_pio_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void ultra_pio_output(struct net_device *dev, int count, - const unsigned char *buf, const int start_page); -static int ultra_close_card(struct net_device *dev); - -#ifdef __ISAPNP__ -static struct isapnp_device_id ultra_device_ids[] __initdata = { - { ISAPNP_VENDOR('S','M','C'), ISAPNP_FUNCTION(0x8416), - ISAPNP_VENDOR('S','M','C'), ISAPNP_FUNCTION(0x8416), - (long) "SMC EtherEZ (8416)" }, - { } /* terminate list */ -}; - -MODULE_DEVICE_TABLE(isapnp, ultra_device_ids); -#endif - - -#define START_PG 0x00 /* First page of TX buffer */ - -#define ULTRA_CMDREG 0 /* Offset to ASIC command register. */ -#define ULTRA_RESET 0x80 /* Board reset, in ULTRA_CMDREG. */ -#define ULTRA_MEMENB 0x40 /* Enable the shared memory. */ -#define IOPD 0x02 /* I/O Pipe Data (16 bits), PIO operation. */ -#define IOPA 0x07 /* I/O Pipe Address for PIO operation. */ -#define ULTRA_NIC_OFFSET 16 /* NIC register offset from the base_addr. */ -#define ULTRA_IO_EXTENT 32 -#define EN0_ERWCNT 0x08 /* Early receive warning count. */ - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void ultra_poll(struct net_device *dev) -{ - disable_irq(dev->irq); - ei_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif -/* Probe for the Ultra. This looks like a 8013 with the station - address PROM at I/O ports <base>+8 to <base>+13, with a checksum - following. -*/ - -static int __init do_ultra_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return ultra_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - -#ifdef __ISAPNP__ - /* Look for any installed ISAPnP cards */ - if (isapnp_present() && (ultra_probe_isapnp(dev) == 0)) - return 0; -#endif - - for (i = 0; ultra_portlist[i]; i++) { - dev->irq = irq; - if (ultra_probe1(dev, ultra_portlist[i]) == 0) - return 0; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init ultra_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_ultra_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops ultra_netdev_ops = { - .ndo_open = ultra_open, - .ndo_stop = ultra_close_card, - - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_multicast_list = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ultra_poll, -#endif -}; - -static int __init ultra_probe1(struct net_device *dev, int ioaddr) -{ - int i, retval; - int checksum = 0; - const char *model_name; - unsigned char eeprom_irq = 0; - static unsigned version_printed; - /* Values from various config regs. */ - unsigned char num_pages, irqreg, addr, piomode; - unsigned char idreg = inb(ioaddr + 7); - unsigned char reg4 = inb(ioaddr + 4) & 0x7f; - - if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* Check the ID nibble. */ - if ((idreg & 0xF0) != 0x20 /* SMC Ultra */ - && (idreg & 0xF0) != 0x40) { /* SMC EtherEZ */ - retval = -ENODEV; - goto out; - } - - /* Select the station address register set. */ - outb(reg4, ioaddr + 4); - - for (i = 0; i < 8; i++) - checksum += inb(ioaddr + 8 + i); - if ((checksum & 0xff) != 0xFF) { - retval = -ENODEV; - goto out; - } - - if (ei_debug && version_printed++ == 0) - printk(version); - - model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ"; - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + 8 + i); - - printk("%s: %s at %#3x, %pM", dev->name, model_name, - ioaddr, dev->dev_addr); - - /* Switch from the station address to the alternate register set and - read the useful registers there. */ - outb(0x80 | reg4, ioaddr + 4); - - /* Enabled FINE16 mode to avoid BIOS ROM width mismatches @ reboot. */ - outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c); - piomode = inb(ioaddr + 0x8); - addr = inb(ioaddr + 0xb); - irqreg = inb(ioaddr + 0xd); - - /* Switch back to the station address register set so that the MS-DOS driver - can find the card after a warm boot. */ - outb(reg4, ioaddr + 4); - - if (dev->irq < 2) { - unsigned char irqmap[] = {0, 9, 3, 5, 7, 10, 11, 15}; - int irq; - - /* The IRQ bits are split. */ - irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)]; - - if (irq == 0) { - printk(", failed to detect IRQ line.\n"); - retval = -EAGAIN; - goto out; - } - dev->irq = irq; - eeprom_irq = 1; - } - - /* The 8390 isn't at the base address, so fake the offset */ - dev->base_addr = ioaddr+ULTRA_NIC_OFFSET; - - { - static const int addr_tbl[4] = { - 0x0C0000, 0x0E0000, 0xFC0000, 0xFE0000 - }; - static const short num_pages_tbl[4] = { - 0x20, 0x40, 0x80, 0xff - }; - - dev->mem_start = ((addr & 0x0f) << 13) + addr_tbl[(addr >> 6) & 3] ; - num_pages = num_pages_tbl[(addr >> 4) & 3]; - } - - ei_status.name = model_name; - ei_status.word16 = 1; - ei_status.tx_start_page = START_PG; - ei_status.rx_start_page = START_PG + TX_PAGES; - ei_status.stop_page = num_pages; - - ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256); - if (!ei_status.mem) { - printk(", failed to ioremap.\n"); - retval = -ENOMEM; - goto out; - } - - dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256; - - if (piomode) { - printk(",%s IRQ %d programmed-I/O mode.\n", - eeprom_irq ? "EEPROM" : "assigned ", dev->irq); - ei_status.block_input = &ultra_pio_input; - ei_status.block_output = &ultra_pio_output; - ei_status.get_8390_hdr = &ultra_pio_get_hdr; - } else { - printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ", - dev->irq, dev->mem_start, dev->mem_end-1); - ei_status.block_input = &ultra_block_input; - ei_status.block_output = &ultra_block_output; - ei_status.get_8390_hdr = &ultra_get_8390_hdr; - } - ei_status.reset_8390 = &ultra_reset_8390; - - dev->netdev_ops = &ultra_netdev_ops; - NS8390_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out; - return 0; -out: - release_region(ioaddr, ULTRA_IO_EXTENT); - return retval; -} - -#ifdef __ISAPNP__ -static int __init ultra_probe_isapnp(struct net_device *dev) -{ - int i; - - for (i = 0; ultra_device_ids[i].vendor != 0; i++) { - struct pnp_dev *idev = NULL; - - while ((idev = pnp_find_dev(NULL, - ultra_device_ids[i].vendor, - ultra_device_ids[i].function, - idev))) { - /* Avoid already found cards from previous calls */ - if (pnp_device_attach(idev) < 0) - continue; - if (pnp_activate_dev(idev) < 0) { - __again: - pnp_device_detach(idev); - continue; - } - /* if no io and irq, search for next */ - if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) - goto __again; - /* found it */ - dev->base_addr = pnp_port_start(idev, 0); - dev->irq = pnp_irq(idev, 0); - printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) ultra_device_ids[i].driver_data, - dev->base_addr, dev->irq); - if (ultra_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); - pnp_device_detach(idev); - return -ENXIO; - } - ei_status.priv = (unsigned long)idev; - break; - } - if (!idev) - continue; - return 0; - } - - return -ENODEV; -} -#endif - -static int -ultra_open(struct net_device *dev) -{ - int retval; - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */ - unsigned char irq2reg[] = {0, 0, 0x04, 0x08, 0, 0x0C, 0, 0x40, - 0, 0x04, 0x44, 0x48, 0, 0, 0, 0x4C, }; - - retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev); - if (retval) - return retval; - - outb(0x00, ioaddr); /* Disable shared memory for safety. */ - outb(0x80, ioaddr + 5); - /* Set the IRQ line. */ - outb(inb(ioaddr + 4) | 0x80, ioaddr + 4); - outb((inb(ioaddr + 13) & ~0x4C) | irq2reg[dev->irq], ioaddr + 13); - outb(inb(ioaddr + 4) & 0x7f, ioaddr + 4); - - if (ei_status.block_input == &ultra_pio_input) { - outb(0x11, ioaddr + 6); /* Enable interrupts and PIO. */ - outb(0x01, ioaddr + 0x19); /* Enable ring read auto-wrap. */ - } else - outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */ - /* Set the early receive warning level in window 0 high enough not - to receive ERW interrupts. */ - outb_p(E8390_NODMA+E8390_PAGE0, dev->base_addr); - outb(0xff, dev->base_addr + EN0_ERWCNT); - ei_open(dev); - return 0; -} - -static void -ultra_reset_8390(struct net_device *dev) -{ - int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */ - - outb(ULTRA_RESET, cmd_port); - if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies); - ei_status.txing = 0; - - outb(0x00, cmd_port); /* Disable shared memory for safety. */ - outb(0x80, cmd_port + 5); - if (ei_status.block_input == &ultra_pio_input) - outb(0x11, cmd_port + 6); /* Enable interrupts and PIO. */ - else - outb(0x01, cmd_port + 6); /* Enable interrupts and memory. */ - - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. Similar to the block_input routine, but - we don't need to be concerned with ring wrap as the header will be at - the start of a page, so we optimize accordingly. */ - -static void -ultra_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - void __iomem *hdr_start = ei_status.mem + ((ring_page - START_PG)<<8); - - outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET); /* shmem on */ -#ifdef __BIG_ENDIAN - /* Officially this is what we are doing, but the readl() is faster */ - /* unfortunately it isn't endian aware of the struct */ - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = le16_to_cpu(hdr->count); -#else - ((unsigned int*)hdr)[0] = readl(hdr_start); -#endif - outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* shmem off */ -} - -/* Block input and output are easy on shared memory ethercards, the only - complication is when the ring buffer wraps. */ - -static void -ultra_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - void __iomem *xfer_start = ei_status.mem + ring_offset - (START_PG<<8); - - /* Enable shared memory. */ - outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET); - - if (ring_offset + count > ei_status.stop_page*256) { - /* We must wrap the input move. */ - int semi_count = ei_status.stop_page*256 - ring_offset; - memcpy_fromio(skb->data, xfer_start, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count); - } else { - memcpy_fromio(skb->data, xfer_start, count); - } - - outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */ -} - -static void -ultra_block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) -{ - void __iomem *shmem = ei_status.mem + ((start_page - START_PG)<<8); - - /* Enable shared memory. */ - outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET); - - memcpy_toio(shmem, buf, count); - - outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */ -} - -/* The identical operations for programmed I/O cards. - The PIO model is trivial to use: the 16 bit start address is written - byte-sequentially to IOPA, with no intervening I/O operations, and the - data is read or written to the IOPD data port. - The only potential complication is that the address register is shared - and must be always be rewritten between each read/write direction change. - This is no problem for us, as the 8390 code ensures that we are single - threaded. */ -static void ultra_pio_get_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page) -{ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */ - outb(0x00, ioaddr + IOPA); /* Set the address, LSB first. */ - outb(ring_page, ioaddr + IOPA); - insw(ioaddr + IOPD, hdr, sizeof(struct e8390_pkt_hdr)>>1); -} - -static void ultra_pio_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset) -{ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */ - char *buf = skb->data; - - /* For now set the address again, although it should already be correct. */ - outb(ring_offset, ioaddr + IOPA); /* Set the address, LSB first. */ - outb(ring_offset >> 8, ioaddr + IOPA); - /* We know skbuffs are padded to at least word alignment. */ - insw(ioaddr + IOPD, buf, (count+1)>>1); -} - -static void ultra_pio_output(struct net_device *dev, int count, - const unsigned char *buf, const int start_page) -{ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */ - outb(0x00, ioaddr + IOPA); /* Set the address, LSB first. */ - outb(start_page, ioaddr + IOPA); - /* An extra odd byte is OK here as well. */ - outsw(ioaddr + IOPD, buf, (count+1)>>1); -} - -static int -ultra_close_card(struct net_device *dev) -{ - int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */ - - netif_stop_queue(dev); - - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - - outb(0x00, ioaddr + 6); /* Disable interrupts. */ - free_irq(dev->irq, dev); - - NS8390_init(dev, 0); - - /* We should someday disable shared memory and change to 8-bit mode - "just in case"... */ - - return 0; -} - - -#ifdef MODULE -#define MAX_ULTRA_CARDS 4 /* Max number of Ultra cards per module */ -static struct net_device *dev_ultra[MAX_ULTRA_CARDS]; -static int io[MAX_ULTRA_CARDS]; -static int irq[MAX_ULTRA_CARDS]; - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "smc-ultra.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - if (do_ultra_probe(dev) == 0) { - dev_ultra[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "smc-ultra.c: No SMC Ultra card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: ultra_close_card() does free_irq */ -#ifdef __ISAPNP__ - struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv; - if (idev) - pnp_device_detach(idev); -#endif - release_region(dev->base_addr - ULTRA_NIC_OFFSET, ULTRA_IO_EXTENT); - iounmap(ei_status.mem); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) { - struct net_device *dev = dev_ultra[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ |