aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig29
-rw-r--r--drivers/mtd/nand/Makefile2
-rw-r--r--drivers/mtd/nand/atmel_nand.c74
-rw-r--r--drivers/mtd/nand/au1550nd.c29
-rw-r--r--drivers/mtd/nand/autcpu12.c4
-rw-r--r--drivers/mtd/nand/bcm_umi_nand.c57
-rw-r--r--drivers/mtd/nand/cafe_nand.c21
-rw-r--r--drivers/mtd/nand/cmx270_nand.c23
-rw-r--r--drivers/mtd/nand/cs553x_nand.c15
-rw-r--r--drivers/mtd/nand/davinci_nand.c39
-rw-r--r--drivers/mtd/nand/denali.c6
-rw-r--r--drivers/mtd/nand/diskonchip.c8
-rw-r--r--drivers/mtd/nand/edb7312.c203
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c75
-rw-r--r--drivers/mtd/nand/fsl_upm.c16
-rw-r--r--drivers/mtd/nand/fsmc_nand.c77
-rw-r--r--drivers/mtd/nand/gpmi-nand/Makefile3
-rw-r--r--drivers/mtd/nand/gpmi-nand/bch-regs.h84
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c1057
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c1619
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h273
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-regs.h172
-rw-r--r--drivers/mtd/nand/h1910.c19
-rw-r--r--drivers/mtd/nand/jz4740_nand.c18
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c22
-rw-r--r--drivers/mtd/nand/mxc_nand.c37
-rw-r--r--drivers/mtd/nand/nand_base.c1109
-rw-r--r--drivers/mtd/nand/nand_bbt.c692
-rw-r--r--drivers/mtd/nand/nand_bch.c4
-rw-r--r--drivers/mtd/nand/nand_ecc.c10
-rw-r--r--drivers/mtd/nand/nandsim.c4
-rw-r--r--drivers/mtd/nand/ndfc.c22
-rw-r--r--drivers/mtd/nand/nomadik_nand.c1
-rw-r--r--drivers/mtd/nand/nuc900_nand.c1
-rw-r--r--drivers/mtd/nand/omap2.c22
-rw-r--r--drivers/mtd/nand/orion_nand.c16
-rw-r--r--drivers/mtd/nand/pasemi_nand.c3
-rw-r--r--drivers/mtd/nand/plat_nand.c25
-rw-r--r--drivers/mtd/nand/ppchameleonevb.c47
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c471
-rw-r--r--drivers/mtd/nand/r852.c6
-rw-r--r--drivers/mtd/nand/rtc_from4.c5
-rw-r--r--drivers/mtd/nand/s3c2410.c27
-rw-r--r--drivers/mtd/nand/sharpsl.c13
-rw-r--r--drivers/mtd/nand/sm_common.c2
-rw-r--r--drivers/mtd/nand/socrates_nand.c28
-rw-r--r--drivers/mtd/nand/tmio_nand.c17
-rw-r--r--drivers/mtd/nand/txx9ndfmc.c8
48 files changed, 4597 insertions, 1918 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index dbfa0f7fb46..cce7b70824c 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -83,16 +83,9 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
scratch register here to enable this feature. On Intel Moorestown
boards, the scratch register is at 0xFF108018.
-config MTD_NAND_EDB7312
- tristate "Support for Cirrus Logic EBD7312 evaluation board"
- depends on ARCH_EDB7312
- help
- This enables the driver for the Cirrus Logic EBD7312 evaluation
- board to access the onboard NAND Flash.
-
config MTD_NAND_H1900
tristate "iPAQ H1900 flash"
- depends on ARCH_PXA
+ depends on ARCH_PXA && BROKEN
help
This enables the driver for the iPAQ h1900 flash.
@@ -116,10 +109,11 @@ config MTD_NAND_AMS_DELTA
Support for NAND flash on Amstrad E3 (Delta).
config MTD_NAND_OMAP2
- tristate "NAND Flash device on OMAP2 and OMAP3"
- depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
+ tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+ depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4)
help
- Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+ Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+ platforms.
config MTD_NAND_IDS
tristate
@@ -423,6 +417,19 @@ config MTD_NAND_NANDSIM
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NAND
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ select MTD_CMDLINE_PARTS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time. The GPMI may conflicts with other
+ block, such as SD card. So pay attention to it when you enable
+ the GPMI.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 5745d831168..618f4ba2369 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
-obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
@@ -49,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 55da20ccc7a..23e5d77c39f 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -161,37 +161,6 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
!!host->board->rdy_pin_active_low;
}
-/*
- * Minimal-overhead PIO for data access.
- */
-static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
-}
-
-static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
-}
-
-static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
-}
-
-static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
-}
-
static void dma_complete_func(void *completion)
{
complete(completion);
@@ -266,33 +235,27 @@ err_buf:
static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
return;
- if (host->board->bus_width_16)
- atmel_read_buf16(mtd, buf, len);
- else
- atmel_read_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_fromio(buf, chip->IO_ADDR_R, len);
}
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
- struct atmel_nand_host *host = chip->priv;
if (use_dma && len > mtd->oobsize)
/* only use DMA for bigger than oob size: better performances */
if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
return;
- if (host->board->bus_width_16)
- atmel_write_buf16(mtd, buf, len);
- else
- atmel_write_buf8(mtd, buf, len);
+ /* if no DMA operation possible, use PIO */
+ memcpy_toio(chip->IO_ADDR_W, buf, len);
}
/*
@@ -481,10 +444,6 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
}
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
/*
* Probe for the NAND device.
*/
@@ -496,8 +455,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
struct resource *regs;
struct resource *mem;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
@@ -583,7 +540,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
if (on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
- nand_chip->options |= NAND_USE_FLASH_BBT;
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}
if (!cpu_has_dma())
@@ -594,7 +551,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
- host->dma_chan = dma_request_channel(mask, 0, NULL);
+ host->dma_chan = dma_request_channel(mask, NULL, NULL);
if (!host->dma_chan) {
dev_err(host->dev, "Failed to request DMA channel\n");
use_dma = 0;
@@ -655,27 +612,12 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
goto err_scan_tail;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "atmel_nand";
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
-#endif
- if (num_partitions <= 0 && host->board->partition_info)
- partitions = host->board->partition_info(mtd->size,
- &num_partitions);
-
- if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
- res = -ENXIO;
- goto err_no_partitions;
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, 0,
+ host->board->parts, host->board->num_parts);
if (!res)
return res;
-err_no_partitions:
- nand_release(mtd);
err_scan_tail:
err_scan_ident:
err_no_card:
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index fa5736b9286..7dd3700f230 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -52,7 +52,7 @@ static const struct mtd_partition partition_info[] = {
* au_read_byte - read one byte from the chip
* @mtd: MTD device structure
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static u_char au_read_byte(struct mtd_info *mtd)
{
@@ -67,7 +67,7 @@ static u_char au_read_byte(struct mtd_info *mtd)
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 8it buswith
+ * write function for 8it buswidth
*/
static void au_write_byte(struct mtd_info *mtd, u_char byte)
{
@@ -77,11 +77,10 @@ static void au_write_byte(struct mtd_info *mtd, u_char byte)
}
/**
- * au_read_byte16 - read one byte endianess aware from the chip
+ * au_read_byte16 - read one byte endianness aware from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith with
- * endianess conversion
+ * read function for 16bit buswidth with endianness conversion
*/
static u_char au_read_byte16(struct mtd_info *mtd)
{
@@ -92,12 +91,11 @@ static u_char au_read_byte16(struct mtd_info *mtd)
}
/**
- * au_write_byte16 - write one byte endianess aware to the chip
+ * au_write_byte16 - write one byte endianness aware to the chip
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
- * write function for 16bit buswith with
- * endianess conversion
+ * write function for 16bit buswidth with endianness conversion
*/
static void au_write_byte16(struct mtd_info *mtd, u_char byte)
{
@@ -110,8 +108,7 @@ static void au_write_byte16(struct mtd_info *mtd, u_char byte)
* au_read_word - read one word from the chip
* @mtd: MTD device structure
*
- * read function for 16bit buswith without
- * endianess conversion
+ * read function for 16bit buswidth without endianness conversion
*/
static u16 au_read_word(struct mtd_info *mtd)
{
@@ -127,7 +124,7 @@ static u16 au_read_word(struct mtd_info *mtd)
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 8bit buswith
+ * write function for 8bit buswidth
*/
static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
@@ -146,7 +143,7 @@ static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 8bit buswith
+ * read function for 8bit buswidth
*/
static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
@@ -165,7 +162,7 @@ static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 8bit buswith
+ * verify function for 8bit buswidth
*/
static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
@@ -187,7 +184,7 @@ static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
* @buf: data buffer
* @len: number of bytes to write
*
- * write function for 16bit buswith
+ * write function for 16bit buswidth
*/
static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
@@ -209,7 +206,7 @@ static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
* @buf: buffer to store date
* @len: number of bytes to read
*
- * read function for 16bit buswith
+ * read function for 16bit buswidth
*/
static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
@@ -230,7 +227,7 @@ static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
- * verify function for 16bit buswith
+ * verify function for 16bit buswidth
*/
static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index eddc9a22498..2e42ec2e8ff 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -172,9 +172,9 @@ static int __init autcpu12_init(void)
/* Enable the following for a flash based bad block table */
/*
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
*/
- this->options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(autcpu12_mtd, 1)) {
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 8c569e454dc..46b58d67284 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -52,8 +52,6 @@
static const __devinitconst char gBanner[] = KERN_INFO \
"BCM UMI MTD NAND Driver: 1.00\n";
-const char *part_probes[] = { "cmdlinepart", NULL };
-
#if NAND_ECC_BCH
static uint8_t scan_ff_pattern[] = { 0xff };
@@ -376,16 +374,18 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r)
- return -ENXIO;
+ if (!r) {
+ err = -ENXIO;
+ goto out_free;
+ }
/* map physical address */
bcm_umi_io_base = ioremap(r->start, resource_size(r));
if (!bcm_umi_io_base) {
printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_free;
}
/* Get pointer to private data */
@@ -401,9 +401,8 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
/* Initialize the NAND hardware. */
if (bcm_umi_nand_inithw() < 0) {
printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
+ err = -EIO;
+ goto out_unmap;
}
/* Set address of NAND IO lines */
@@ -436,7 +435,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
#if USE_DMA
err = nand_dma_init();
if (err != 0)
- return err;
+ goto out_unmap;
#endif
/* Figure out the size of the device that we have.
@@ -447,9 +446,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
err = nand_scan_ident(board_mtd, 1, NULL);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Now that we know the nand size, we can setup the ECC layout */
@@ -468,13 +465,14 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
{
printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
board_mtd->writesize);
- return -EINVAL;
+ err = -EINVAL;
+ goto out_unmap;
}
}
#if NAND_ECC_BCH
if (board_mtd->writesize > 512) {
- if (this->options & NAND_USE_FLASH_BBT)
+ if (this->bbt_options & NAND_BBT_USE_FLASH)
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
@@ -485,33 +483,20 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
err = nand_scan_tail(board_mtd);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return err;
+ goto out_unmap;
}
/* Register the partitions */
- {
- int nr_partitions;
- struct mtd_partition *partition_info;
-
- board_mtd->name = "bcm_umi-nand";
- nr_partitions =
- parse_mtd_partitions(board_mtd, part_probes,
- &partition_info, 0);
-
- if (nr_partitions <= 0) {
- printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
- nr_partitions);
- iounmap(bcm_umi_io_base);
- kfree(board_mtd);
- return -EIO;
- }
- mtd_device_register(board_mtd, partition_info, nr_partitions);
- }
+ board_mtd->name = "bcm_umi-nand";
+ mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
/* Return happy */
return 0;
+out_unmap:
+ iounmap(bcm_umi_io_base);
+out_free:
+ kfree(board_mtd);
+ return err;
}
static int bcm_umi_nand_remove(struct platform_device *pdev)
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 7c8df837d3b..72d3f23490c 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -58,7 +58,6 @@
struct cafe_priv {
struct nand_chip nand;
- struct mtd_partition *parts;
struct pci_dev *pdev;
void __iomem *mmio;
struct rs_control *rs;
@@ -372,7 +371,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
return 1;
}
/**
- * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
@@ -631,8 +630,6 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
struct cafe_priv *cafe;
uint32_t ctrl;
int err = 0;
- struct mtd_partition *parts;
- int nr_parts;
/* Very old versions shared the same PCI ident for all three
functions on the chip. Verify the class too... */
@@ -687,7 +684,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.chip_delay = 0;
/* Enable the following for a flash based bad block table */
- cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+ cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
+ cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
if (skipbbt) {
cafe->nand.options |= NAND_SKIP_BBTSCAN;
@@ -800,18 +798,9 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, mtd);
- /* We register the whole device first, separate from the partitions */
- mtd_device_register(mtd, NULL, 0);
-
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "cafe_nand";
-#endif
- nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
- if (nr_parts > 0) {
- cafe->parts = parts;
- dev_info(&cafe->pdev->dev, "%d partitions found\n", nr_parts);
- mtd_device_register(mtd, parts, nr_parts);
- }
+ mtd_device_parse_register(mtd, part_probes, 0, NULL, 0);
+
goto out;
out_irq:
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index be33b0f4634..737ef9a04fd 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -51,8 +51,6 @@ static struct mtd_partition partition_info[] = {
};
#define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
-const char *part_probes[] = { "cmdlinepart", NULL };
-
static u_char cmx270_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
@@ -152,9 +150,6 @@ static int cmx270_device_ready(struct mtd_info *mtd)
static int __init cmx270_init(void)
{
struct nand_chip *this;
- const char *part_type;
- struct mtd_partition *mtd_parts;
- int mtd_parts_nb = 0;
int ret;
if (!(machine_is_armcore() && cpu_is_pxa27x()))
@@ -223,23 +218,9 @@ static int __init cmx270_init(void)
goto err_scan;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_mtd_partitions(cmx270_nand_mtd, part_probes,
- &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (!mtd_parts_nb) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
/* Register the partitions */
- pr_notice("Using %s partition definition\n", part_type);
- ret = mtd_device_register(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
+ ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
if (ret)
goto err_scan;
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index f59ad1f2d5d..414afa79356 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -239,7 +239,8 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
this->ecc.correct = nand_correct_data;
/* Enable the following for a flash based bad block table */
- this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ this->bbt_options = NAND_BBT_USE_FLASH;
+ this->options = NAND_NO_AUTOINCR;
/* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
@@ -277,15 +278,11 @@ static int is_geode(void)
return 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static int __init cs553x_init(void)
{
int err = -ENXIO;
int i;
uint64_t val;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = NULL;
/* If the CPU isn't a Geode GX or LX, abort */
if (!is_geode())
@@ -315,13 +312,9 @@ static int __init cs553x_init(void)
do mtdconcat etc. if we want to. */
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
if (cs553x_mtd[i]) {
-
/* If any devices registered, return success. Else the last error. */
- mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- printk(KERN_NOTICE "Using command line partition definition\n");
- mtd_device_register(cs553x_mtd[i], mtd_parts,
- mtd_parts_nb);
+ mtd_device_parse_register(cs553x_mtd[i], NULL, 0,
+ NULL, 0);
err = 0;
}
}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 1f34951ae1a..c153e1f77f9 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -57,7 +57,6 @@ struct davinci_nand_info {
struct device *dev;
struct clk *clk;
- bool partitioned;
bool is_readmode;
@@ -530,8 +529,6 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
int ret;
uint32_t val;
nand_ecc_modes_t ecc_mode;
- struct mtd_partition *mtd_parts = NULL;
- int mtd_parts_nb = 0;
/* insist on board-specific configuration */
if (!pdata)
@@ -581,7 +578,9 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->chip.chip_delay = 0;
info->chip.select_chip = nand_davinci_select_chip;
- /* options such as NAND_USE_FLASH_BBT or 16-bit widths */
+ /* options such as NAND_BBT_USE_FLASH */
+ info->chip.bbt_options = pdata->bbt_options;
+ /* options such as 16-bit widths */
info->chip.options = pdata->options;
info->chip.bbt_td = pdata->bbt_td;
info->chip.bbt_md = pdata->bbt_md;
@@ -751,33 +750,8 @@ syndrome_done:
if (ret < 0)
goto err_scan;
- if (mtd_has_cmdlinepart()) {
- static const char *probes[] __initconst = {
- "cmdlinepart", NULL
- };
-
- mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes,
- &mtd_parts, 0);
- }
-
- if (mtd_parts_nb <= 0) {
- mtd_parts = pdata->parts;
- mtd_parts_nb = pdata->nr_parts;
- }
-
- /* Register any partitions */
- if (mtd_parts_nb > 0) {
- ret = mtd_device_register(&info->mtd, mtd_parts,
- mtd_parts_nb);
- if (ret == 0)
- info->partitioned = true;
- }
-
- /* If there's no partition info, just package the whole chip
- * as a single MTD device.
- */
- if (!info->partitioned)
- ret = mtd_device_register(&info->mtd, NULL, 0) ? -ENODEV : 0;
+ ret = mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
if (ret < 0)
goto err_scan;
@@ -816,9 +790,6 @@ err_nomem:
static int __exit nand_davinci_remove(struct platform_device *pdev)
{
struct davinci_nand_info *info = platform_get_drvdata(pdev);
- int status;
-
- status = mtd_device_unregister(&info->mtd);
spin_lock_irq(&davinci_nand_lock);
if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index d5276218945..3984d488f9a 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1346,6 +1346,7 @@ static void denali_hw_init(struct denali_nand_info *denali)
* */
denali->bbtskipbytes = ioread32(denali->flash_reg +
SPARE_AREA_SKIP_BYTES);
+ detect_max_banks(denali);
denali_nand_reset(denali);
iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
iowrite32(CHIP_EN_DONT_CARE__FLAG,
@@ -1356,7 +1357,6 @@ static void denali_hw_init(struct denali_nand_info *denali)
/* Should set value for these registers when init */
iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
iowrite32(1, denali->flash_reg + ECC_ENABLE);
- detect_max_banks(denali);
denali_nand_timing_set(denali);
denali_irq_init(denali);
}
@@ -1577,7 +1577,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.bbt_md = &bbt_mirror_descr;
/* skip the scan for now until we have OOB read and write support */
- denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
+ denali->nand.options |= NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
/* Denali Controller only support 15bit and 8bit ECC in MRST,
@@ -1676,7 +1677,6 @@ static void denali_pci_remove(struct pci_dev *dev)
struct denali_nand_info *denali = pci_get_drvdata(dev);
nand_release(&denali->mtd);
- mtd_device_unregister(&denali->mtd);
denali_irq_cleanup(dev->irq, denali);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e1b84cb90f0..5780dbab611 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -133,7 +133,7 @@ static struct rs_control *rs_decoder;
/*
* The HW decoder in the DoC ASIC's provides us a error syndrome,
- * which we must convert to a standard syndrom usable by the generic
+ * which we must convert to a standard syndrome usable by the generic
* Reed-Solomon library code.
*
* Fabrice Bellard figured this out in the old docecc code. I added
@@ -154,7 +154,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
parity = ecc[1];
- /* Initialize the syndrom buffer */
+ /* Initialize the syndrome buffer */
for (i = 0; i < NROOTS; i++)
s[i] = ds[0];
/*
@@ -1032,7 +1032,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
else
WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
- if (no_ecc_failures && (ret == -EBADMSG)) {
+ if (no_ecc_failures && mtd_is_eccerr(ret)) {
printk(KERN_ERR "suppressing ECC failure\n");
ret = 0;
}
@@ -1653,7 +1653,7 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- nand->options = NAND_USE_FLASH_BBT;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
doc->physadr = physadr;
doc->virtadr = virtadr;
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
deleted file mode 100644
index 8400d0f6dad..00000000000
--- a/drivers/mtd/nand/edb7312.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * drivers/mtd/nand/edb7312.c
- *
- * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
- *
- * Derived from drivers/mtd/nand/autcpu12.c
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash device found on the
- * CLEP7312 board which utilizes the Toshiba TC58V64AFT part. This is
- * a 64Mibit (8MiB x 8 bits) NAND flash device.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <asm/io.h>
-#include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
-#include <asm/sizes.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * MTD structure for EDB7312 board
- */
-static struct mtd_info *ep7312_mtd = NULL;
-
-/*
- * Values specific to the EDB7312 board (used with EP7312 processor)
- */
-#define EP7312_FIO_PBASE 0x10000000 /* Phys address of flash */
-#define EP7312_PXDR 0x0001 /*
- * IO offset to Port B data register
- * where the CLE, ALE and NCE pins
- * are wired to.
- */
-#define EP7312_PXDDR 0x0041 /*
- * IO offset to Port B data direction
- * register so we can control the IO
- * lines.
- */
-
-/*
- * Module stuff
- */
-
-static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE;
-static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR;
-static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR;
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info[] = {
- {.name = "EP7312 Nand Flash",
- .offset = 0,
- .size = 8 * 1024 * 1024}
-};
-
-#define NUM_PARTITIONS 1
-
-/*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 -> bit 6 (bit 7 = 1)
- * NAND_CLE: bit 1 -> bit 4
- * NAND_ALE: bit 2 -> bit 5
- */
-static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- unsigned char bits = 0x80;
-
- bits |= (ctrl & (NAND_CLE | NAND_ALE)) << 3;
- bits |= (ctrl & NAND_NCE) ? 0x00 : 0x40;
-
- clps_writeb((clps_readb(ep7312_pxdr) & 0xF0) | bits,
- ep7312_pxdr);
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * read device ready pin
- */
-static int ep7312_device_ready(struct mtd_info *mtd)
-{
- return 1;
-}
-
-const char *part_probes[] = { "cmdlinepart", NULL };
-
-/*
- * Main initialization routine
- */
-static int __init ep7312_init(void)
-{
- struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
- void __iomem *ep7312_fio_base;
-
- /* Allocate memory for MTD device structure and private data */
- ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ep7312_mtd) {
- printk("Unable to allocate EDB7312 NAND MTD device structure.\n");
- return -ENOMEM;
- }
-
- /* map physical address */
- ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K);
- if (!ep7312_fio_base) {
- printk("ioremap EDB7312 NAND flash failed\n");
- kfree(ep7312_mtd);
- return -EIO;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ep7312_mtd[1]);
-
- /* Initialize structures */
- memset(ep7312_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ep7312_mtd->priv = this;
- ep7312_mtd->owner = THIS_MODULE;
-
- /*
- * Set GPIO Port B control register so that the pins are configured
- * to be outputs for controlling the NAND flash.
- */
- clps_writeb(0xf0, ep7312_pxddr);
-
- /* insert callbacks */
- this->IO_ADDR_R = ep7312_fio_base;
- this->IO_ADDR_W = ep7312_fio_base;
- this->cmd_ctrl = ep7312_hwcontrol;
- this->dev_ready = ep7312_device_ready;
- /* 15 us command delay time */
- this->chip_delay = 15;
-
- /* Scan to find existence of the device */
- if (nand_scan(ep7312_mtd, 1)) {
- iounmap((void *)ep7312_fio_base);
- kfree(ep7312_mtd);
- return -ENXIO;
- }
- ep7312_mtd->name = "edb7312-nand";
- mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ep7312_mtd, mtd_parts, mtd_parts_nb);
-
- /* Return happy */
- return 0;
-}
-
-module_init(ep7312_init);
-
-/*
- * Clean up routine
- */
-static void __exit ep7312_cleanup(void)
-{
- struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1];
-
- /* Release resources, unregister device */
- nand_release(ap7312_mtd);
-
- /* Release io resource */
- iounmap(this->IO_ADDR_R);
-
- /* Free the MTD device structure */
- kfree(ep7312_mtd);
-}
-
-module_exit(ep7312_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marius Groeger <mag@sysgo.de>");
-MODULE_DESCRIPTION("MTD map driver for Cogent EDB7312 board");
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 33d8aad8bba..eedd8ee2c9a 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -75,7 +75,6 @@ struct fsl_elbc_fcm_ctrl {
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int counter; /* counter for the initializations */
- char *oob_poi; /* Place to write ECC after read back */
};
/* These map to the positions used by the FCM hardware ECC generator */
@@ -244,6 +243,25 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
return -EIO;
}
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+ uint32_t lteccr = in_be32(&lbc->lteccr);
+ /*
+ * if command was a full page read and the ELBC
+ * has the LTECCR register, then bits 12-15 (ppc order) of
+ * LTECCR indicates which 512 byte sub-pages had fixed errors.
+ * bits 28-31 are uncorrectable errors, marked elsewhere.
+ * for small page nand only 1 bit is used.
+ * if the ELBC doesn't have the lteccr register it reads 0
+ */
+ if (lteccr & 0x000F000F)
+ out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+ if (lteccr & 0x000F0000)
+ mtd->ecc_stats.corrected++;
+ }
+
return 0;
}
@@ -435,7 +453,6 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG: {
- int full_page;
dev_vdbg(priv->dev,
"fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
"writing %d bytes.\n", elbc_fcm_ctrl->index);
@@ -445,34 +462,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
* write so the HW generates the ECC.
*/
if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
- elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) {
+ elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
out_be32(&lbc->fbcr, elbc_fcm_ctrl->index);
- full_page = 0;
- } else {
+ else
out_be32(&lbc->fbcr, 0);
- full_page = 1;
- }
fsl_elbc_run_command(mtd);
-
- /* Read back the page in order to fill in the ECC for the
- * caller. Is this really needed?
- */
- if (full_page && elbc_fcm_ctrl->oob_poi) {
- out_be32(&lbc->fbcr, 3);
- set_addr(mtd, 6, page_addr, 1);
-
- elbc_fcm_ctrl->read_bytes = mtd->writesize + 9;
-
- fsl_elbc_do_read(chip, 1);
- fsl_elbc_run_command(mtd);
-
- memcpy_fromio(elbc_fcm_ctrl->oob_poi + 6,
- &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], 3);
- elbc_fcm_ctrl->index += 3;
- }
-
- elbc_fcm_ctrl->oob_poi = NULL;
return;
}
@@ -752,13 +747,8 @@ static void fsl_elbc_write_page(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf)
{
- struct fsl_elbc_mtd *priv = chip->priv;
- struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
-
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- elbc_fcm_ctrl->oob_poi = chip->oob_poi;
}
static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
@@ -791,8 +781,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
chip->bbt_md = &bbt_mirror_descr;
/* set up nand options */
- chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
- NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->controller = &elbc_fcm_ctrl->controller;
chip->priv = priv;
@@ -829,7 +819,6 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
elbc_fcm_ctrl->chips[priv->bank] = NULL;
kfree(priv);
- kfree(elbc_fcm_ctrl);
return 0;
}
@@ -842,13 +831,14 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
struct resource res;
struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
static const char *part_probe_types[]
- = { "cmdlinepart", "RedBoot", NULL };
- struct mtd_partition *parts;
+ = { "cmdlinepart", "RedBoot", "ofpart", NULL };
int ret;
int bank;
struct device *dev;
struct device_node *node = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+ ppdata.of_node = pdev->dev.of_node;
if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
return -ENODEV;
lbc = fsl_lbc_ctrl_dev->regs;
@@ -934,17 +924,8 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev)
/* First look for RedBoot table or partitions on the command
* line, these take precedence over device tree information */
- ret = parse_mtd_partitions(&priv->mtd, part_probe_types, &parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(priv->dev, node, &parts);
- if (ret < 0)
- goto err;
- }
-
- mtd_device_register(&priv->mtd, parts, ret);
+ mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+ NULL, 0);
printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
(unsigned long long)res.start, priv->bank);
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 23752fd5bc5..b4f3cc9f32f 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -158,7 +158,7 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
{
int ret;
struct device_node *flash_np;
- static const char *part_types[] = { "cmdlinepart", NULL, };
+ struct mtd_part_parser_data ppdata;
fun->chip.IO_ADDR_R = fun->io_base;
fun->chip.IO_ADDR_W = fun->io_base;
@@ -192,18 +192,12 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
if (ret)
goto err;
- ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
-
-#ifdef CONFIG_MTD_OF_PARTS
- if (ret == 0) {
- ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
- if (ret < 0)
- goto err;
- }
-#endif
- ret = mtd_device_register(&fun->mtd, fun->parts, ret);
+ ppdata.of_node = flash_np;
+ ret = mtd_device_parse_register(&fun->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
+ if (ret)
+ kfree(fun->mtd.name);
return ret;
}
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index e9b275ac381..e53b7606413 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -146,7 +146,7 @@ static struct mtd_partition partition_info_16KB_blk[] = {
{
.name = "Root File System",
.offset = 0x460000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
@@ -173,13 +173,10 @@ static struct mtd_partition partition_info_128KB_blk[] = {
{
.name = "Root File System",
.offset = 0x800000,
- .size = 0,
+ .size = MTDPART_SIZ_FULL,
},
};
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
@@ -187,8 +184,6 @@ const char *part_probes[] = { "cmdlinepart", NULL };
* @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
- * @partitions: Partition info for a NAND Flash.
- * @nr_partitions: Total number of partition of a NAND flash.
*
* @ecc_place: ECC placing locations in oobfree type format.
* @bank: Bank number for probed device.
@@ -203,8 +198,6 @@ struct fsmc_nand_data {
u32 pid;
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *partitions;
- unsigned int nr_partitions;
struct fsmc_eccplace *ecc_place;
unsigned int bank;
@@ -716,65 +709,17 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
* platform data,
* default partition information present in driver.
*/
-#ifdef CONFIG_MTD_CMDLINE_PARTS
/*
- * Check if partition info passed via command line
+ * Check for partition info passed
*/
host->mtd.name = "nand";
- host->nr_partitions = parse_mtd_partitions(&host->mtd, part_probes,
- &host->partitions, 0);
- if (host->nr_partitions <= 0) {
-#endif
- /*
- * Check if partition info passed via command line
- */
- if (pdata->partitions) {
- host->partitions = pdata->partitions;
- host->nr_partitions = pdata->nr_partitions;
- } else {
- struct mtd_partition *partition;
- int i;
-
- /* Select the default partitions info */
- switch (host->mtd.size) {
- case 0x01000000:
- case 0x02000000:
- case 0x04000000:
- host->partitions = partition_info_16KB_blk;
- host->nr_partitions =
- sizeof(partition_info_16KB_blk) /
- sizeof(struct mtd_partition);
- break;
- case 0x08000000:
- case 0x10000000:
- case 0x20000000:
- case 0x40000000:
- host->partitions = partition_info_128KB_blk;
- host->nr_partitions =
- sizeof(partition_info_128KB_blk) /
- sizeof(struct mtd_partition);
- break;
- default:
- ret = -ENXIO;
- pr_err("Unsupported NAND size\n");
- goto err_probe;
- }
-
- partition = host->partitions;
- for (i = 0; i < host->nr_partitions; i++, partition++) {
- if (partition->size == 0) {
- partition->size = host->mtd.size -
- partition->offset;
- break;
- }
- }
- }
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- }
-#endif
-
- ret = mtd_device_register(&host->mtd, host->partitions,
- host->nr_partitions);
+ ret = mtd_device_parse_register(&host->mtd, NULL, 0,
+ host->mtd.size <= 0x04000000 ?
+ partition_info_16KB_blk :
+ partition_info_128KB_blk,
+ host->mtd.size <= 0x04000000 ?
+ ARRAY_SIZE(partition_info_16KB_blk) :
+ ARRAY_SIZE(partition_info_128KB_blk));
if (ret)
goto err_probe;
@@ -822,7 +767,7 @@ static int fsmc_nand_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (host) {
- mtd_device_unregister(&host->mtd);
+ nand_release(&host->mtd);
clk_disable(host->clk);
clk_put(host->clk);
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 00000000000..3a462487c35
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
new file mode 100644
index 00000000000..4effb8c579d
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -0,0 +1,84 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_BCH_REGS_H
+#define __GPMI_NAND_BCH_REGS_H
+
+#define HW_BCH_CTRL 0x00000000
+#define HW_BCH_CTRL_SET 0x00000004
+#define HW_BCH_CTRL_CLR 0x00000008
+#define HW_BCH_CTRL_TOG 0x0000000c
+
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define HW_BCH_STATUS0 0x00000010
+#define HW_BCH_MODE 0x00000020
+#define HW_BCH_ENCODEPTR 0x00000030
+#define HW_BCH_DATAPTR 0x00000040
+#define HW_BCH_METAPTR 0x00000050
+#define HW_BCH_LAYOUTSELECT 0x00000070
+
+#define HW_BCH_FLASH0LAYOUT0 0x00000080
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS (0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE (0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT0_ECC0 12
+#define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+
+#define HW_BCH_FLASH0LAYOUT1 0x00000090
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE \
+ (0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT1_ECCN 12
+#define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
new file mode 100644
index 00000000000..de4db7604a3
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -0,0 +1,1057 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <mach/mxs.h>
+
+#include "gpmi-nand.h"
+#include "gpmi-regs.h"
+#include "bch-regs.h"
+
+struct timing_threshod timing_default_threshold = {
+ .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >>
+ BP_GPMI_TIMING0_DATA_SETUP),
+ .internal_data_setup_in_ns = 0,
+ .max_sample_delay_factor = (BM_GPMI_CTRL1_RDN_DELAY >>
+ BP_GPMI_CTRL1_RDN_DELAY),
+ .max_dll_clock_period_in_ns = 32,
+ .max_dll_delay_in_ns = 16,
+};
+
+/*
+ * Clear the bit and poll it cleared. This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+ int timeout = 0x400;
+
+ /* clear the bit */
+ __mxs_clrl(mask, addr);
+
+ /*
+ * SFTRST needs 3 GPMI clocks to settle, the reference manual
+ * recommends to wait 1us.
+ */
+ udelay(1);
+
+ /* poll the bit becoming clear */
+ while ((readl(addr) & mask) && --timeout)
+ /* nothing */;
+
+ return !timeout;
+}
+
+#define MODULE_CLKGATE (1 << 30)
+#define MODULE_SFTRST (1 << 31)
+/*
+ * The current mxs_reset_block() will do two things:
+ * [1] enable the module.
+ * [2] reset the module.
+ *
+ * In most of the cases, it's ok. But there is a hardware bug in the BCH block.
+ * If you try to soft reset the BCH block, it becomes unusable until
+ * the next hard reset. This case occurs in the NAND boot mode. When the board
+ * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
+ * So If the driver tries to reset the BCH again, the BCH will not work anymore.
+ * You will see a DMA timeout in this case.
+ *
+ * To avoid this bug, just add a new parameter `just_enable` for
+ * the mxs_reset_block(), and rewrite it here.
+ */
+int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+{
+ int ret;
+ int timeout = 0x400;
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear CLKGATE */
+ __mxs_clrl(MODULE_CLKGATE, reset_addr);
+
+ if (!just_enable) {
+ /* set SFTRST to reset the block */
+ __mxs_setl(MODULE_SFTRST, reset_addr);
+ udelay(1);
+
+ /* poll CLKGATE becoming set */
+ while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
+ /* nothing */;
+ if (unlikely(!timeout))
+ goto error;
+ }
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear and poll CLKGATE */
+ ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
+ if (unlikely(ret))
+ goto error;
+
+ return 0;
+
+error:
+ pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+ return -ETIMEDOUT;
+}
+
+int gpmi_init(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ int ret;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+ ret = gpmi_reset_block(r->gpmi_regs, false);
+ if (ret)
+ goto err_out;
+
+ /* Choose NAND mode. */
+ writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Set the IRQ polarity. */
+ writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+ r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Disable Write-Protection. */
+ writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Select BCH ECC. */
+ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* This function is very useful. It is called only when the bug occur. */
+void gpmi_dump_info(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *geo = &this->bch_geometry;
+ u32 reg;
+ int i;
+
+ pr_err("Show GPMI registers :\n");
+ for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
+ reg = readl(r->gpmi_regs + i * 0x10);
+ pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ }
+
+ /* start to print out the BCH info */
+ pr_err("BCH Geometry :\n");
+ pr_err("GF length : %u\n", geo->gf_len);
+ pr_err("ECC Strength : %u\n", geo->ecc_strength);
+ pr_err("Page Size in Bytes : %u\n", geo->page_size);
+ pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size);
+ pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size);
+ pr_err("ECC Chunk Count : %u\n", geo->ecc_chunk_count);
+ pr_err("Payload Size in Bytes : %u\n", geo->payload_size);
+ pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size);
+ pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset);
+ pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset);
+ pr_err("Block Mark Bit Offset : %u\n", geo->block_mark_bit_offset);
+}
+
+/* Configures the geometry for BCH. */
+int bch_set_geometry(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *bch_geo = &this->bch_geometry;
+ unsigned int block_count;
+ unsigned int block_size;
+ unsigned int metadata_size;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ int ret;
+
+ if (common_nfc_set_geometry(this))
+ return !0;
+
+ block_count = bch_geo->ecc_chunk_count - 1;
+ block_size = bch_geo->ecc_chunk_size;
+ metadata_size = bch_geo->metadata_size;
+ ecc_strength = bch_geo->ecc_strength >> 1;
+ page_size = bch_geo->page_size;
+
+ ret = clk_enable(r->clock);
+ if (ret)
+ goto err_out;
+
+ ret = gpmi_reset_block(r->bch_regs, true);
+ if (ret)
+ goto err_out;
+
+ /* Configure layout 0. */
+ writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
+ | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
+ | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+ writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
+ | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
+ | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ /* Set *all* chip selects to use layout 0. */
+ writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
+
+ /* Enable interrupts. */
+ writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+ r->bch_regs + HW_BCH_CTRL_SET);
+
+ clk_disable(r->clock);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* Converts time in nanoseconds to cycles. */
+static unsigned int ns_to_cycles(unsigned int time,
+ unsigned int period, unsigned int min)
+{
+ unsigned int k;
+
+ k = (time + period - 1) / period;
+ return max(k, min);
+}
+
+/* Apply timing to current hardware conditions. */
+static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
+ struct gpmi_nfc_hardware_timing *hw)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ struct nand_chip *nand = &this->nand;
+ struct nand_timing target = this->timing;
+ bool improved_timing_is_available;
+ unsigned long clock_frequency_in_hz;
+ unsigned int clock_period_in_ns;
+ bool dll_use_half_periods;
+ unsigned int dll_delay_shift;
+ unsigned int max_sample_delay_in_ns;
+ unsigned int address_setup_in_cycles;
+ unsigned int data_setup_in_ns;
+ unsigned int data_setup_in_cycles;
+ unsigned int data_hold_in_cycles;
+ int ideal_sample_delay_in_ns;
+ unsigned int sample_delay_factor;
+ int tEYE;
+ unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
+ unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+
+ /*
+ * If there are multiple chips, we need to relax the timings to allow
+ * for signal distortion due to higher capacitance.
+ */
+ if (nand->numchips > 2) {
+ target.data_setup_in_ns += 10;
+ target.data_hold_in_ns += 10;
+ target.address_setup_in_ns += 10;
+ } else if (nand->numchips > 1) {
+ target.data_setup_in_ns += 5;
+ target.data_hold_in_ns += 5;
+ target.address_setup_in_ns += 5;
+ }
+
+ /* Check if improved timing information is available. */
+ improved_timing_is_available =
+ (target.tREA_in_ns >= 0) &&
+ (target.tRLOH_in_ns >= 0) &&
+ (target.tRHOH_in_ns >= 0) ;
+
+ /* Inspect the clock. */
+ clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+ clock_period_in_ns = 1000000000 / clock_frequency_in_hz;
+
+ /*
+ * The NFC quantizes setup and hold parameters in terms of clock cycles.
+ * Here, we quantize the setup and hold timing parameters to the
+ * next-highest clock period to make sure we apply at least the
+ * specified times.
+ *
+ * For data setup and data hold, the hardware interprets a value of zero
+ * as the largest possible delay. This is not what's intended by a zero
+ * in the input parameter, so we impose a minimum of one cycle.
+ */
+ data_setup_in_cycles = ns_to_cycles(target.data_setup_in_ns,
+ clock_period_in_ns, 1);
+ data_hold_in_cycles = ns_to_cycles(target.data_hold_in_ns,
+ clock_period_in_ns, 1);
+ address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
+ clock_period_in_ns, 0);
+
+ /*
+ * The clock's period affects the sample delay in a number of ways:
+ *
+ * (1) The NFC HAL tells us the maximum clock period the sample delay
+ * DLL can tolerate. If the clock period is greater than half that
+ * maximum, we must configure the DLL to be driven by half periods.
+ *
+ * (2) We need to convert from an ideal sample delay, in ns, to a
+ * "sample delay factor," which the NFC uses. This factor depends on
+ * whether we're driving the DLL with full or half periods.
+ * Paraphrasing the reference manual:
+ *
+ * AD = SDF x 0.125 x RP
+ *
+ * where:
+ *
+ * AD is the applied delay, in ns.
+ * SDF is the sample delay factor, which is dimensionless.
+ * RP is the reference period, in ns, which is a full clock period
+ * if the DLL is being driven by full periods, or half that if
+ * the DLL is being driven by half periods.
+ *
+ * Let's re-arrange this in a way that's more useful to us:
+ *
+ * 8
+ * SDF = AD x ----
+ * RP
+ *
+ * The reference period is either the clock period or half that, so this
+ * is:
+ *
+ * 8 AD x DDF
+ * SDF = AD x ----- = --------
+ * f x P P
+ *
+ * where:
+ *
+ * f is 1 or 1/2, depending on how we're driving the DLL.
+ * P is the clock period.
+ * DDF is the DLL Delay Factor, a dimensionless value that
+ * incorporates all the constants in the conversion.
+ *
+ * DDF will be either 8 or 16, both of which are powers of two. We can
+ * reduce the cost of this conversion by using bit shifts instead of
+ * multiplication or division. Thus:
+ *
+ * AD << DDS
+ * SDF = ---------
+ * P
+ *
+ * or
+ *
+ * AD = (SDF >> DDS) x P
+ *
+ * where:
+ *
+ * DDS is the DLL Delay Shift, the logarithm to base 2 of the DDF.
+ */
+ if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
+ dll_use_half_periods = true;
+ dll_delay_shift = 3 + 1;
+ } else {
+ dll_use_half_periods = false;
+ dll_delay_shift = 3;
+ }
+
+ /*
+ * Compute the maximum sample delay the NFC allows, under current
+ * conditions. If the clock is running too slowly, no sample delay is
+ * possible.
+ */
+ if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
+ max_sample_delay_in_ns = 0;
+ else {
+ /*
+ * Compute the delay implied by the largest sample delay factor
+ * the NFC allows.
+ */
+ max_sample_delay_in_ns =
+ (nfc->max_sample_delay_factor * clock_period_in_ns) >>
+ dll_delay_shift;
+
+ /*
+ * Check if the implied sample delay larger than the NFC
+ * actually allows.
+ */
+ if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
+ max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
+ }
+
+ /*
+ * Check if improved timing information is available. If not, we have to
+ * use a less-sophisticated algorithm.
+ */
+ if (!improved_timing_is_available) {
+ /*
+ * Fold the read setup time required by the NFC into the ideal
+ * sample delay.
+ */
+ ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
+ nfc->internal_data_setup_in_ns;
+
+ /*
+ * The ideal sample delay may be greater than the maximum
+ * allowed by the NFC. If so, we can trade off sample delay time
+ * for more data setup time.
+ *
+ * In each iteration of the following loop, we add a cycle to
+ * the data setup time and subtract a corresponding amount from
+ * the sample delay until we've satisified the constraints or
+ * can't do any better.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ data_setup_in_cycles++;
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds most closely
+ * to the ideal sample delay. If the result is too large for the
+ * NFC, use the maximum value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the
+ * sample delay factor. We do this because the form of the
+ * computation is the same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /* Skip to the part where we return our results. */
+ goto return_results;
+ }
+
+ /*
+ * If control arrives here, we have more detailed timing information,
+ * so we can use a better algorithm.
+ */
+
+ /*
+ * Fold the read setup time required by the NFC into the maximum
+ * propagation delay.
+ */
+ max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
+
+ /*
+ * Earlier, we computed the number of clock cycles required to satisfy
+ * the data setup time. Now, we need to know the actual nanoseconds.
+ */
+ data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
+
+ /*
+ * Compute tEYE, the width of the data eye when reading from the NAND
+ * Flash. The eye width is fundamentally determined by the data setup
+ * time, perturbed by propagation delays and some characteristics of the
+ * NAND Flash device.
+ *
+ * start of the eye = max_prop_delay + tREA
+ * end of the eye = min_prop_delay + tRHOH + data_setup
+ */
+ tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
+ (int)data_setup_in_ns;
+
+ tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
+
+ /*
+ * The eye must be open. If it's not, we can try to open it by
+ * increasing its main forcer, the data setup time.
+ *
+ * In each iteration of the following loop, we increase the data setup
+ * time by a single clock cycle. We do this until either the eye is
+ * open or we run into NFC limits.
+ */
+ while ((tEYE <= 0) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+ }
+
+ /*
+ * When control arrives here, the eye is open. The ideal time to sample
+ * the data is in the center of the eye:
+ *
+ * end of the eye + start of the eye
+ * --------------------------------- - data_setup
+ * 2
+ *
+ * After some algebra, this simplifies to the code immediately below.
+ */
+ ideal_sample_delay_in_ns =
+ ((int)max_prop_delay_in_ns +
+ (int)target.tREA_in_ns +
+ (int)min_prop_delay_in_ns +
+ (int)target.tRHOH_in_ns -
+ (int)data_setup_in_ns) >> 1;
+
+ /*
+ * The following figure illustrates some aspects of a NAND Flash read:
+ *
+ *
+ * __ _____________________________________
+ * RDN \_________________/
+ *
+ * <---- tEYE ----->
+ * /-----------------\
+ * Read Data ----------------------------< >---------
+ * \-----------------/
+ * ^ ^ ^ ^
+ * | | | |
+ * |<--Data Setup -->|<--Delay Time -->| |
+ * | | | |
+ * | | |
+ * | |<-- Quantized Delay Time -->|
+ * | | |
+ *
+ *
+ * We have some issues we must now address:
+ *
+ * (1) The *ideal* sample delay time must not be negative. If it is, we
+ * jam it to zero.
+ *
+ * (2) The *ideal* sample delay time must not be greater than that
+ * allowed by the NFC. If it is, we can increase the data setup
+ * time, which will reduce the delay between the end of the data
+ * setup and the center of the eye. It will also make the eye
+ * larger, which might help with the next issue...
+ *
+ * (3) The *quantized* sample delay time must not fall either before the
+ * eye opens or after it closes (the latter is the problem
+ * illustrated in the above figure).
+ */
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * Extend the data setup as needed to reduce the ideal sample delay
+ * below the maximum permitted by the NFC.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds to the ideal sample
+ * delay. If the result is too large, then use the maximum allowed
+ * value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the sample
+ * delay factor. We do this because the form of the computation is the
+ * same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /*
+ * These macros conveniently encapsulate a computation we'll use to
+ * continuously evaluate whether or not the data sample delay is inside
+ * the eye.
+ */
+ #define IDEAL_DELAY ((int) ideal_sample_delay_in_ns)
+
+ #define QUANTIZED_DELAY \
+ ((int) ((sample_delay_factor * clock_period_in_ns) >> \
+ dll_delay_shift))
+
+ #define DELAY_ERROR (abs(QUANTIZED_DELAY - IDEAL_DELAY))
+
+ #define SAMPLE_IS_NOT_WITHIN_THE_EYE (DELAY_ERROR > (tEYE >> 1))
+
+ /*
+ * While the quantized sample time falls outside the eye, reduce the
+ * sample delay or extend the data setup to move the sampling point back
+ * toward the eye. Do not allow the number of data setup cycles to
+ * exceed the maximum allowed by the NFC.
+ */
+ while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * outside the eye. Check if it's before the eye opens, or after
+ * the eye closes.
+ */
+ if (QUANTIZED_DELAY > IDEAL_DELAY) {
+ /*
+ * If control arrives here, the quantized sample delay
+ * falls after the eye closes. Decrease the quantized
+ * delay time and then go back to re-evaluate.
+ */
+ if (sample_delay_factor != 0)
+ sample_delay_factor--;
+ continue;
+ }
+
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * before the eye opens. Shift the sample point by increasing
+ * data setup time. This will also make the eye larger.
+ */
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* ...and one less period for the delay time. */
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * We have a new ideal sample delay, so re-compute the quantized
+ * delay.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+ }
+
+ /* Control arrives here when we're ready to return our results. */
+return_results:
+ hw->data_setup_in_cycles = data_setup_in_cycles;
+ hw->data_hold_in_cycles = data_hold_in_cycles;
+ hw->address_setup_in_cycles = address_setup_in_cycles;
+ hw->use_half_periods = dll_use_half_periods;
+ hw->sample_delay_factor = sample_delay_factor;
+
+ /* Return success. */
+ return 0;
+}
+
+/* Begin the I/O */
+void gpmi_begin(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct timing_threshod *nfc = &timing_default_threshold;
+ unsigned char *gpmi_regs = r->gpmi_regs;
+ unsigned int clock_period_in_ns;
+ uint32_t reg;
+ unsigned int dll_wait_time_in_us;
+ struct gpmi_nfc_hardware_timing hw;
+ int ret;
+
+ /* Enable the clock. */
+ ret = clk_enable(r->clock);
+ if (ret) {
+ pr_err("We failed in enable the clk\n");
+ goto err_out;
+ }
+
+ /* set ready/busy timeout */
+ writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT,
+ gpmi_regs + HW_GPMI_TIMING1);
+
+ /* Get the timing information we need. */
+ nfc->clock_frequency_in_hz = clk_get_rate(r->clock);
+ clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz;
+
+ gpmi_nfc_compute_hardware_timing(this, &hw);
+
+ /* Set up all the simple timing parameters. */
+ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
+ BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) |
+ BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ;
+
+ writel(reg, gpmi_regs + HW_GPMI_TIMING0);
+
+ /*
+ * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD.
+ */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Clear out the DLL control fields. */
+ writel(BM_GPMI_CTRL1_RDN_DELAY, gpmi_regs + HW_GPMI_CTRL1_CLR);
+ writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* If no sample delay is called for, return immediately. */
+ if (!hw.sample_delay_factor)
+ return;
+
+ /* Configure the HALF_PERIOD flag. */
+ if (hw.use_half_periods)
+ writel(BM_GPMI_CTRL1_HALF_PERIOD,
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Set the delay factor. */
+ writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor),
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Enable the DLL. */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /*
+ * After we enable the GPMI DLL, we have to wait 64 clock cycles before
+ * we can use the GPMI.
+ *
+ * Calculate the amount of time we need to wait, in microseconds.
+ */
+ dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
+
+ if (!dll_wait_time_in_us)
+ dll_wait_time_in_us = 1;
+
+ /* Wait for the DLL to settle. */
+ udelay(dll_wait_time_in_us);
+
+err_out:
+ return;
+}
+
+void gpmi_end(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ clk_disable(r->clock);
+}
+
+/* Clears a BCH interrupt. */
+void gpmi_clear_bch(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/* Returns the Ready/Busy status of the given chip. */
+int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
+{
+ struct resources *r = &this->resources;
+ uint32_t mask = 0;
+ uint32_t reg = 0;
+
+ if (GPMI_IS_MX23(this)) {
+ mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
+ reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
+ } else if (GPMI_IS_MX28(this)) {
+ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
+ reg = readl(r->gpmi_regs + HW_GPMI_STAT);
+ } else
+ pr_err("unknow arch.\n");
+ return reg & mask;
+}
+
+static inline void set_dma_type(struct gpmi_nand_data *this,
+ enum dma_ops_type type)
+{
+ this->last_dma_type = this->dma_type;
+ this->dma_type = type;
+}
+
+int gpmi_send_command(struct gpmi_nand_data *this)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl;
+ int chip = this->current_chip;
+ u32 pio[3];
+
+ /* [1] send out the PIO words */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+ | BM_GPMI_CTRL0_ADDRESS_INCREMENT
+ | BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
+ pio[1] = pio[2] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+ sgl = &this->cmd_sgl;
+
+ sg_init_one(sgl, this->cmd_buffer, this->command_length);
+ dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel,
+ sgl, 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_COMMAND);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ uint32_t command_mode;
+ uint32_t address;
+ u32 pio[2];
+
+ /* [1] PIO */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] send DMA request */
+ prepare_data_dma(this, DMA_TO_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_TO_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_WRITE_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_read_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[2];
+
+ /* [1] : send PIO */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] : send DMA request */
+ prepare_data_dma(this, DMA_FROM_DEVICE);
+ desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_FROM_DEVICE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] : submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* A DMA descriptor that does an ECC page read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+ BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+ set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
+
+int gpmi_read_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* [1] Wait for the chip to report ready. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 0);
+ if (!desc) {
+ pr_err("step 1 error\n");
+ return -1;
+ }
+
+ /* [2] Enable the BCH block and read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+ | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 2 error\n");
+ return -1;
+ }
+
+ /* [3] Disable the BCH block */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+ pio[1] = 0;
+ desc = channel->device->device_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2, DMA_NONE, 1);
+ if (!desc) {
+ pr_err("step 3 error\n");
+ return -1;
+ }
+
+ /* [4] submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
new file mode 100644
index 00000000000..071b63420f0
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -0,0 +1,1619 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/gpmi-nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpmi-nand.h"
+
+/* add our owner bbt descriptor */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr gpmi_bbt_descr = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+/* We will use all the (page + OOB). */
+static struct nand_ecclayout gpmi_hw_ecclayout = {
+ .eccbytes = 0,
+ .eccpos = { 0, },
+ .oobfree = { {.offset = 0, .length = 0} }
+};
+
+static irqreturn_t bch_irq(int irq, void *cookie)
+{
+ struct gpmi_nand_data *this = cookie;
+
+ gpmi_clear_bch(this);
+ complete(&this->bch_done);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Calculate the ECC strength by hand:
+ * E : The ECC strength.
+ * G : the length of Galois Field.
+ * N : The chunk count of per page.
+ * O : the oobsize of the NAND chip.
+ * M : the metasize of per page.
+ *
+ * The formula is :
+ * E * G * N
+ * ------------ <= (O - M)
+ * 8
+ *
+ * So, we get E by:
+ * (O - M) * 8
+ * E <= -------------
+ * G * N
+ */
+static inline int get_ecc_strength(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ int ecc_strength;
+
+ ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8)
+ / (geo->gf_len * geo->ecc_chunk_count);
+
+ /* We need the minor even number. */
+ return round_down(ecc_strength, 2);
+}
+
+int common_nfc_set_geometry(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int metadata_size;
+ unsigned int status_size;
+ unsigned int block_mark_bit_offset;
+
+ /*
+ * The size of the metadata can be changed, though we set it to 10
+ * bytes now. But it can't be too large, because we have to save
+ * enough space for BCH.
+ */
+ geo->metadata_size = 10;
+
+ /* The default for the length of Galois Field. */
+ geo->gf_len = 13;
+
+ /* The default for chunk size. There is no oobsize greater then 512. */
+ geo->ecc_chunk_size = 512;
+ while (geo->ecc_chunk_size < mtd->oobsize)
+ geo->ecc_chunk_size *= 2; /* keep C >= O */
+
+ geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+ /* We use the same ECC strength for all chunks. */
+ geo->ecc_strength = get_ecc_strength(this);
+ if (!geo->ecc_strength) {
+ pr_err("We get a wrong ECC strength.\n");
+ return -EINVAL;
+ }
+
+ geo->page_size = mtd->writesize + mtd->oobsize;
+ geo->payload_size = mtd->writesize;
+
+ /*
+ * The auxiliary buffer contains the metadata and the ECC status. The
+ * metadata is padded to the nearest 32-bit boundary. The ECC status
+ * contains one byte for every ECC chunk, and is also padded to the
+ * nearest 32-bit boundary.
+ */
+ metadata_size = ALIGN(geo->metadata_size, 4);
+ status_size = ALIGN(geo->ecc_chunk_count, 4);
+
+ geo->auxiliary_size = metadata_size + status_size;
+ geo->auxiliary_status_offset = metadata_size;
+
+ if (!this->swap_block_mark)
+ return 0;
+
+ /*
+ * We need to compute the byte and bit offsets of
+ * the physical block mark within the ECC-based view of the page.
+ *
+ * NAND chip with 2K page shows below:
+ * (Block Mark)
+ * | |
+ * | D |
+ * |<---->|
+ * V V
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ * | M | data |E| data |E| data |E| data |E|
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ *
+ * The position of block mark moves forward in the ECC-based view
+ * of page, and the delta is:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M)
+ * 8
+ *
+ * With the formula to compute the ECC strength, and the condition
+ * : C >= O (C is the ecc chunk size)
+ *
+ * It's easy to deduce to the following result:
+ *
+ * E * G (O - M) C - M C - M
+ * ----------- <= ------- <= -------- < ---------
+ * 8 N N (N - 1)
+ *
+ * So, we get:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M) < C
+ * 8
+ *
+ * The above inequality means the position of block mark
+ * within the ECC-based view of the page is still in the data chunk,
+ * and it's NOT in the ECC bits of the chunk.
+ *
+ * Use the following to compute the bit position of the
+ * physical block mark within the ECC-based view of the page:
+ * (page_size - D) * 8
+ *
+ * --Huang Shijie
+ */
+ block_mark_bit_offset = mtd->writesize * 8 -
+ (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+ + geo->metadata_size * 8);
+
+ geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+ geo->block_mark_bit_offset = block_mark_bit_offset % 8;
+ return 0;
+}
+
+struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
+{
+ int chipnr = this->current_chip;
+
+ return this->dma_chans[chipnr];
+}
+
+/* Can we use the upper's buffer directly for DMA? */
+void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+{
+ struct scatterlist *sgl = &this->data_sgl;
+ int ret;
+
+ this->direct_dma_map_ok = true;
+
+ /* first try to map the upper buffer directly */
+ sg_init_one(sgl, this->upper_buf, this->upper_len);
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0) {
+ /* We have to use our own DMA buffer. */
+ sg_init_one(sgl, this->data_buffer_dma, PAGE_SIZE);
+
+ if (dr == DMA_TO_DEVICE)
+ memcpy(this->data_buffer_dma, this->upper_buf,
+ this->upper_len);
+
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0)
+ pr_err("map failed.\n");
+
+ this->direct_dma_map_ok = false;
+ }
+}
+
+/* This will be called after the DMA operation is finished. */
+static void dma_irq_callback(void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct completion *dma_c = &this->dma_done;
+
+ complete(dma_c);
+
+ switch (this->dma_type) {
+ case DMA_FOR_COMMAND:
+ dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+ if (this->direct_dma_map_ok == false)
+ memcpy(this->upper_buf, this->data_buffer_dma,
+ this->upper_len);
+ break;
+
+ case DMA_FOR_WRITE_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_ECC_PAGE:
+ case DMA_FOR_WRITE_ECC_PAGE:
+ /* We have to wait the BCH interrupt to finish. */
+ break;
+
+ default:
+ pr_err("in wrong DMA operation.\n");
+ }
+}
+
+int start_dma_without_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *dma_c = &this->dma_done;
+ int err;
+
+ init_completion(dma_c);
+
+ desc->callback = dma_irq_callback;
+ desc->callback_param = this;
+ dmaengine_submit(desc);
+
+ /* Wait for the interrupt from the DMA block. */
+ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * This function is used in BCH reading or BCH writing pages.
+ * It will wait for the BCH interrupt as long as ONE second.
+ * Actually, we must wait for two interrupts :
+ * [1] firstly the DMA interrupt and
+ * [2] secondly the BCH interrupt.
+ */
+int start_dma_with_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *bch_c = &this->bch_done;
+ int err;
+
+ /* Prepare to receive an interrupt from the BCH block. */
+ init_completion(bch_c);
+
+ /* start the DMA */
+ start_dma_without_bch_irq(this, desc);
+
+ /* Wait for the interrupt from the BCH block. */
+ err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+ if (!err) {
+ pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int __devinit
+acquire_register_block(struct gpmi_nand_data *this, const char *res_name)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ struct resource *r;
+ void *p;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ p = ioremap(r->start, resource_size(r));
+ if (!p) {
+ pr_err("Can't remap %s\n", res_name);
+ return -ENOMEM;
+ }
+
+ if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
+ res->gpmi_regs = p;
+ else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
+ res->bch_regs = p;
+ else
+ pr_err("unknown resource name : %s\n", res_name);
+
+ return 0;
+}
+
+static void release_register_block(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ if (res->gpmi_regs)
+ iounmap(res->gpmi_regs);
+ if (res->bch_regs)
+ iounmap(res->bch_regs);
+ res->gpmi_regs = NULL;
+ res->bch_regs = NULL;
+}
+
+static int __devinit
+acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
+ struct resource *r;
+ int err;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+ if (!r) {
+ pr_err("Can't get resource for %s\n", res_name);
+ return -ENXIO;
+ }
+
+ err = request_irq(r->start, irq_h, 0, res_name, this);
+ if (err) {
+ pr_err("Can't own %s\n", res_name);
+ return err;
+ }
+
+ res->bch_low_interrupt = r->start;
+ res->bch_high_interrupt = r->end;
+ return 0;
+}
+
+static void release_bch_irq(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int i = res->bch_low_interrupt;
+
+ for (; i <= res->bch_high_interrupt; i++)
+ free_irq(i, this);
+}
+
+static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct resource *r = this->private;
+
+ if (!mxs_dma_is_apbh(chan))
+ return false;
+ /*
+ * only catch the GPMI dma channels :
+ * for mx23 : MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
+ * (These four channels share the same IRQ!)
+ *
+ * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
+ * (These eight channels share the same IRQ!)
+ */
+ if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+ chan->private = &this->dma_data;
+ return true;
+ }
+ return false;
+}
+
+static void release_dma_channels(struct gpmi_nand_data *this)
+{
+ unsigned int i;
+ for (i = 0; i < DMA_CHANS; i++)
+ if (this->dma_chans[i]) {
+ dma_release_channel(this->dma_chans[i]);
+ this->dma_chans[i] = NULL;
+ }
+}
+
+static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
+{
+ struct platform_device *pdev = this->pdev;
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct resources *res = &this->resources;
+ struct resource *r, *r_dma;
+ unsigned int i;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
+ GPMI_NAND_DMA_CHANNELS_RES_NAME);
+ r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ GPMI_NAND_DMA_INTERRUPT_RES_NAME);
+ if (!r || !r_dma) {
+ pr_err("Can't get resource for DMA\n");
+ return -ENXIO;
+ }
+
+ /* used in gpmi_dma_filter() */
+ this->private = r;
+
+ for (i = r->start; i <= r->end; i++) {
+ struct dma_chan *dma_chan;
+ dma_cap_mask_t mask;
+
+ if (i - r->start >= pdata->max_chip_count)
+ break;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* get the DMA interrupt */
+ if (r_dma->start == r_dma->end) {
+ /* only register the first. */
+ if (i == r->start)
+ this->dma_data.chan_irq = r_dma->start;
+ else
+ this->dma_data.chan_irq = NO_IRQ;
+ } else
+ this->dma_data.chan_irq = r_dma->start + (i - r->start);
+
+ dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+ if (!dma_chan)
+ goto acquire_err;
+
+ /* fill the first empty item */
+ this->dma_chans[i - r->start] = dma_chan;
+ }
+
+ res->dma_low_channel = r->start;
+ res->dma_high_channel = i;
+ return 0;
+
+acquire_err:
+ pr_err("Can't acquire DMA channel %u\n", i);
+ release_dma_channels(this);
+ return -EINVAL;
+}
+
+static int __devinit acquire_resources(struct gpmi_nand_data *this)
+{
+ struct resources *res = &this->resources;
+ int ret;
+
+ ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_bch_irq(this, bch_irq);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_dma_channels(this);
+ if (ret)
+ goto exit_dma_channels;
+
+ res->clock = clk_get(&this->pdev->dev, NULL);
+ if (IS_ERR(res->clock)) {
+ pr_err("can not get the clock\n");
+ ret = -ENOENT;
+ goto exit_clock;
+ }
+ return 0;
+
+exit_clock:
+ release_dma_channels(this);
+exit_dma_channels:
+ release_bch_irq(this);
+exit_regs:
+ release_register_block(this);
+ return ret;
+}
+
+static void release_resources(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+
+ clk_put(r->clock);
+ release_register_block(this);
+ release_bch_irq(this);
+ release_dma_channels(this);
+}
+
+static int __devinit init_hardware(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /*
+ * This structure contains the "safe" GPMI timing that should succeed
+ * with any NAND Flash device
+ * (although, with less-than-optimal performance).
+ */
+ struct nand_timing safe_timing = {
+ .data_setup_in_ns = 80,
+ .data_hold_in_ns = 60,
+ .address_setup_in_ns = 25,
+ .gpmi_sample_delay_in_ns = 6,
+ .tREA_in_ns = -1,
+ .tRLOH_in_ns = -1,
+ .tRHOH_in_ns = -1,
+ };
+
+ /* Initialize the hardwares. */
+ ret = gpmi_init(this);
+ if (ret)
+ return ret;
+
+ this->timing = safe_timing;
+ return 0;
+}
+
+static int read_page_prepare(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(destination)) {
+ dma_addr_t dest_phys;
+
+ dest_phys = dma_map_single(dev, destination,
+ length, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, dest_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = destination;
+ *use_phys = dest_phys;
+ this->direct_dma_map_ok = true;
+ return 0;
+ }
+
+map_failed:
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ this->direct_dma_map_ok = false;
+ return 0;
+}
+
+static inline void read_page_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (this->direct_dma_map_ok)
+ dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
+}
+
+static inline void read_page_swap_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (!this->direct_dma_map_ok)
+ memcpy(destination, alt_virt, length);
+}
+
+static int send_page_prepare(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(source)) {
+ dma_addr_t source_phys;
+
+ source_phys = dma_map_single(dev, (void *)source, length,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, source_phys)) {
+ if (alt_size < length) {
+ pr_err("Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = source;
+ *use_phys = source_phys;
+ return 0;
+ }
+map_failed:
+ /*
+ * Copy the content of the source buffer into the alternate
+ * buffer and set up the return values accordingly.
+ */
+ memcpy(alt_virt, source, length);
+
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ return 0;
+}
+
+static void send_page_end(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void *used_virt, dma_addr_t used_phys)
+{
+ struct device *dev = this->dev;
+ if (used_virt == source)
+ dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
+}
+
+static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+
+ if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt))
+ dma_free_coherent(dev, this->page_buffer_size,
+ this->page_buffer_virt,
+ this->page_buffer_phys);
+ kfree(this->cmd_buffer);
+ kfree(this->data_buffer_dma);
+
+ this->cmd_buffer = NULL;
+ this->data_buffer_dma = NULL;
+ this->page_buffer_virt = NULL;
+ this->page_buffer_size = 0;
+}
+
+/* Allocate the DMA buffers */
+static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct device *dev = this->dev;
+
+ /* [1] Allocate a command buffer. PAGE_SIZE is enough. */
+ this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->cmd_buffer == NULL)
+ goto error_alloc;
+
+ /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */
+ this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA);
+ if (this->data_buffer_dma == NULL)
+ goto error_alloc;
+
+ /*
+ * [3] Allocate the page buffer.
+ *
+ * Both the payload buffer and the auxiliary buffer must appear on
+ * 32-bit boundaries. We presume the size of the payload buffer is a
+ * power of two and is much larger than four, which guarantees the
+ * auxiliary buffer will appear on a 32-bit boundary.
+ */
+ this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
+ this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size,
+ &this->page_buffer_phys, GFP_DMA);
+ if (!this->page_buffer_virt)
+ goto error_alloc;
+
+
+ /* Slice up the page buffer. */
+ this->payload_virt = this->page_buffer_virt;
+ this->payload_phys = this->page_buffer_phys;
+ this->auxiliary_virt = this->payload_virt + geo->payload_size;
+ this->auxiliary_phys = this->payload_phys + geo->payload_size;
+ return 0;
+
+error_alloc:
+ gpmi_free_dma_buffer(this);
+ pr_err("allocate DMA buffer ret!!\n");
+ return -ENOMEM;
+}
+
+static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /*
+ * Every operation begins with a command byte and a series of zero or
+ * more address bytes. These are distinguished by either the Address
+ * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+ * asserted. When MTD is ready to execute the command, it will deassert
+ * both latch enables.
+ *
+ * Rather than run a separate DMA operation for every single byte, we
+ * queue them up and run a single DMA operation for the entire series
+ * of command and data bytes. NAND_CMD_NONE means the END of the queue.
+ */
+ if ((ctrl & (NAND_ALE | NAND_CLE))) {
+ if (data != NAND_CMD_NONE)
+ this->cmd_buffer[this->command_length++] = data;
+ return;
+ }
+
+ if (!this->command_length)
+ return;
+
+ ret = gpmi_send_command(this);
+ if (ret)
+ pr_err("Chip: %u, Error %d\n", this->current_chip, ret);
+
+ this->command_length = 0;
+}
+
+static int gpmi_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ return gpmi_is_ready(this, this->current_chip);
+}
+
+static void gpmi_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ if ((this->current_chip < 0) && (chipnr >= 0))
+ gpmi_begin(this);
+ else if ((this->current_chip >= 0) && (chipnr < 0))
+ gpmi_end(this);
+
+ this->current_chip = chipnr;
+}
+
+static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = buf;
+ this->upper_len = len;
+
+ gpmi_read_data(this);
+}
+
+static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("len is %d\n", len);
+ this->upper_buf = (uint8_t *)buf;
+ this->upper_len = len;
+
+ gpmi_send_data(this);
+}
+
+static uint8_t gpmi_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ uint8_t *buf = this->data_buffer_dma;
+
+ gpmi_read_buf(mtd, buf, 1);
+ return buf[0];
+}
+
+/*
+ * Handles block mark swapping.
+ * It can be called in swapping the block mark, or swapping it back,
+ * because the the operations are the same.
+ */
+static void block_mark_swapping(struct gpmi_nand_data *this,
+ void *payload, void *auxiliary)
+{
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ unsigned char *p;
+ unsigned char *a;
+ unsigned int bit;
+ unsigned char mask;
+ unsigned char from_data;
+ unsigned char from_oob;
+
+ if (!this->swap_block_mark)
+ return;
+
+ /*
+ * If control arrives here, we're swapping. Make some convenience
+ * variables.
+ */
+ bit = nfc_geo->block_mark_bit_offset;
+ p = payload + nfc_geo->block_mark_byte_offset;
+ a = auxiliary;
+
+ /*
+ * Get the byte from the data area that overlays the block mark. Since
+ * the ECC engine applies its own view to the bits in the page, the
+ * physical block mark won't (in general) appear on a byte boundary in
+ * the data.
+ */
+ from_data = (p[0] >> bit) | (p[1] << (8 - bit));
+
+ /* Get the byte from the OOB. */
+ from_oob = a[0];
+
+ /* Swap them. */
+ a[0] = from_data;
+
+ mask = (0x1 << bit) - 1;
+ p[0] = (p[0] & mask) | (from_oob << bit);
+
+ mask = ~0 << bit;
+ p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
+}
+
+static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ void *payload_virt;
+ dma_addr_t payload_phys;
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ unsigned int i;
+ unsigned char *status;
+ unsigned int failed;
+ unsigned int corrected;
+ int ret;
+
+ pr_debug("page number is : %d\n", page);
+ ret = read_page_prepare(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate DMA buffer\n");
+ ret = -ENOMEM;
+ return ret;
+ }
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* go! */
+ ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
+ read_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ if (ret) {
+ pr_err("Error in ECC-based read: %d\n", ret);
+ goto exit_nfc;
+ }
+
+ /* handle the block mark swapping */
+ block_mark_swapping(this, payload_virt, auxiliary_virt);
+
+ /* Loop over status bytes, accumulating ECC status. */
+ failed = 0;
+ corrected = 0;
+ status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+
+ for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+ if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+ continue;
+
+ if (*status == STATUS_UNCORRECTABLE) {
+ failed++;
+ continue;
+ }
+ corrected += *status;
+ }
+
+ /*
+ * Propagate ECC status to the owning MTD only when failed or
+ * corrected times nearly reaches our ECC correction threshold.
+ */
+ if (failed || corrected >= (nfc_geo->ecc_strength - 1)) {
+ mtd->ecc_stats.failed += failed;
+ mtd->ecc_stats.corrected += corrected;
+ }
+
+ /*
+ * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
+ * details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the block
+ * mark to th caller's buffer. Note that, if block mark swapping was
+ * necessary, it has already been done, so we can rely on the first
+ * byte of the auxiliary buffer to contain the block mark.
+ */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+exit_nfc:
+ return ret;
+}
+
+static void gpmi_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ const void *payload_virt;
+ dma_addr_t payload_phys;
+ const void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ int ret;
+
+ pr_debug("ecc write page.\n");
+ if (this->swap_block_mark) {
+ /*
+ * If control arrives here, we're doing block mark swapping.
+ * Since we can't modify the caller's buffers, we must copy them
+ * into our own.
+ */
+ memcpy(this->payload_virt, buf, mtd->writesize);
+ payload_virt = this->payload_virt;
+ payload_phys = this->payload_phys;
+
+ memcpy(this->auxiliary_virt, chip->oob_poi,
+ nfc_geo->auxiliary_size);
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* Handle block mark swapping. */
+ block_mark_swapping(this,
+ (void *) payload_virt, (void *) auxiliary_virt);
+ } else {
+ /*
+ * If control arrives here, we're not doing block mark swapping,
+ * so we can to try and use the caller's buffers.
+ */
+ ret = send_page_prepare(this,
+ buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ pr_err("Inadequate payload DMA buffer\n");
+ return;
+ }
+
+ ret = send_page_prepare(this,
+ chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ &auxiliary_virt, &auxiliary_phys);
+ if (ret) {
+ pr_err("Inadequate auxiliary DMA buffer\n");
+ goto exit_auxiliary;
+ }
+ }
+
+ /* Ask the NFC. */
+ ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
+ if (ret)
+ pr_err("Error in ECC-based write: %d\n", ret);
+
+ if (!this->swap_block_mark) {
+ send_page_end(this, chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ auxiliary_virt, auxiliary_phys);
+exit_auxiliary:
+ send_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ }
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ * true state of the block mark, no matter where that block mark appears in
+ * the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ * return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ * page, using the conventional definition of which bytes are data and which
+ * are OOB. This gives the caller a way to see the actual, physical bytes
+ * in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ * | Raw | ECC-based |
+ * -------------+-------------------------+-------------------------+
+ * | Read the conventional | |
+ * | OOB at the end of the | |
+ * Swapping | page and return it. It | |
+ * | contains exactly what | |
+ * | we want. | Read the block mark and |
+ * -------------+-------------------------+ return it in a buffer |
+ * | Read the conventional | full of set bits. |
+ * | OOB at the end of the | |
+ * | page and also the block | |
+ * Transcribing | mark in the metadata. | |
+ * | Copy the block mark | |
+ * | into the first byte of | |
+ * | the OOB. | |
+ * -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ */
+static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ struct gpmi_nand_data *this = chip->priv;
+
+ pr_debug("page number is %d\n", page);
+ /* clear the OOB buffer */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+
+ /* Read out the conventional OOB. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /*
+ * Now, we want to make sure the block mark is correct. In the
+ * Swapping/Raw case, we already have it. Otherwise, we need to
+ * explicitly read it.
+ */
+ if (!this->swap_block_mark) {
+ /* Read the block mark into the first byte of the OOB buffer. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+ chip->oob_poi[0] = chip->read_byte(mtd);
+ }
+
+ /*
+ * Return true, indicating that the next call to this function must send
+ * a command.
+ */
+ return true;
+}
+
+static int
+gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+ /*
+ * The BCH will use all the (page + oob).
+ * Our gpmi_hw_ecclayout can only prohibit the JFFS2 to write the oob.
+ * But it can not stop some ioctls such MEMWRITEOOB which uses
+ * MTD_OPS_PLACE_OOB. So We have to implement this function to prohibit
+ * these ioctls too.
+ */
+ return -EPERM;
+}
+
+static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int block, ret = 0;
+ uint8_t *block_mark;
+ int column, page, status, chipnr;
+
+ /* Get block number */
+ block = (int)(ofs >> chip->bbt_erase_shift);
+ if (chip->bbt)
+ chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+ /* Do we have a flash based bad block table ? */
+ if (chip->options & NAND_BBT_USE_FLASH)
+ ret = nand_update_bbt(mtd, ofs);
+ else {
+ chipnr = (int)(ofs >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ column = this->swap_block_mark ? mtd->writesize : 0;
+
+ /* Write the block mark. */
+ block_mark = this->data_buffer_dma;
+ block_mark[0] = 0; /* bad block marker */
+
+ /* Shift to get page */
+ page = (int)(ofs >> chip->page_shift);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+ chip->write_buf(mtd, block_mark, 1);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ ret = -EIO;
+
+ chip->select_chip(mtd, -1);
+ }
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ return ret;
+}
+
+static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *geometry = &this->rom_geometry;
+
+ /*
+ * Set the boot block stride size.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->stride_size_in_pages = 64;
+
+ /*
+ * Set the search area stride exponent.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->search_area_stride_exponent = 2;
+ return 0;
+}
+
+static const char *fingerprint = "STMP";
+static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct device *dev = this->dev;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int search_area_size_in_strides;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int found_an_ncb_fingerprint = false;
+
+ /* Compute the number of strides in a search area. */
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /*
+ * Loop through the first search area, looking for the NCB fingerprint.
+ */
+ dev_dbg(dev, "Scanning for an NCB fingerprint...\n");
+
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page);
+
+ /*
+ * Read the NCB fingerprint. The fingerprint is four bytes long
+ * and starts in the 12th byte of the page.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page);
+ chip->read_buf(mtd, buffer, strlen(fingerprint));
+
+ /* Look for the fingerprint. */
+ if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
+ found_an_ncb_fingerprint = true;
+ break;
+ }
+
+ }
+
+ chip->select_chip(mtd, saved_chip_number);
+
+ if (found_an_ncb_fingerprint)
+ dev_dbg(dev, "\tFound a fingerprint\n");
+ else
+ dev_dbg(dev, "\tNo fingerprint found\n");
+ return found_an_ncb_fingerprint;
+}
+
+/* Writes a transcription stamp. */
+static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int block_size_in_pages;
+ unsigned int search_area_size_in_strides;
+ unsigned int search_area_size_in_pages;
+ unsigned int search_area_size_in_blocks;
+ unsigned int block;
+ unsigned int stride;
+ unsigned int page;
+ loff_t byte;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int status;
+
+ /* Compute the search area geometry. */
+ block_size_in_pages = mtd->erasesize / mtd->writesize;
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+ search_area_size_in_pages = search_area_size_in_strides *
+ rom_geo->stride_size_in_pages;
+ search_area_size_in_blocks =
+ (search_area_size_in_pages + (block_size_in_pages - 1)) /
+ block_size_in_pages;
+
+ dev_dbg(dev, "Search Area Geometry :\n");
+ dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks);
+ dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides);
+ dev_dbg(dev, "\tin Pages : %u\n", search_area_size_in_pages);
+
+ /* Select chip 0. */
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /* Loop over blocks in the first search area, erasing them. */
+ dev_dbg(dev, "Erasing the search area...\n");
+
+ for (block = 0; block < search_area_size_in_blocks; block++) {
+ /* Compute the page address. */
+ page = block * block_size_in_pages;
+
+ /* Erase this block. */
+ dev_dbg(dev, "\tErasing block 0x%x\n", block);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ /* Wait for the erase to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Erase failed.\n", __func__);
+ }
+
+ /* Write the NCB fingerprint into the page buffer. */
+ memset(buffer, ~0, mtd->writesize);
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ memcpy(buffer + 12, fingerprint, strlen(fingerprint));
+
+ /* Loop through the first search area, writing NCB fingerprints. */
+ dev_dbg(dev, "Writing NCB fingerprints...\n");
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page and byte addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+ byte = page * mtd->writesize;
+
+ /* Write the first page of the current stride. */
+ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ chip->ecc.write_page_raw(mtd, chip, buffer);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ /* Wait for the write to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Write failed.\n", __func__);
+ }
+
+ /* Deselect chip 0. */
+ chip->select_chip(mtd, saved_chip_number);
+ return 0;
+}
+
+static int __devinit mx23_boot_init(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct nand_chip *chip = &this->nand;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int block_count;
+ unsigned int block;
+ int chipnr;
+ int page;
+ loff_t byte;
+ uint8_t block_mark;
+ int ret = 0;
+
+ /*
+ * If control arrives here, we can't use block mark swapping, which
+ * means we're forced to use transcription. First, scan for the
+ * transcription stamp. If we find it, then we don't have to do
+ * anything -- the block marks are already transcribed.
+ */
+ if (mx23_check_transcription_stamp(this))
+ return 0;
+
+ /*
+ * If control arrives here, we couldn't find a transcription stamp, so
+ * so we presume the block marks are in the conventional location.
+ */
+ dev_dbg(dev, "Transcribing bad block marks...\n");
+
+ /* Compute the number of blocks in the entire medium. */
+ block_count = chip->chipsize >> chip->phys_erase_shift;
+
+ /*
+ * Loop over all the blocks in the medium, transcribing block marks as
+ * we go.
+ */
+ for (block = 0; block < block_count; block++) {
+ /*
+ * Compute the chip, page and byte addresses for this block's
+ * conventional mark.
+ */
+ chipnr = block >> (chip->chip_shift - chip->phys_erase_shift);
+ page = block << (chip->phys_erase_shift - chip->page_shift);
+ byte = block << chip->phys_erase_shift;
+
+ /* Send the command to read the conventional block mark. */
+ chip->select_chip(mtd, chipnr);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ block_mark = chip->read_byte(mtd);
+ chip->select_chip(mtd, -1);
+
+ /*
+ * Check if the block is marked bad. If so, we need to mark it
+ * again, but this time the result will be a mark in the
+ * location where we transcribe block marks.
+ */
+ if (block_mark != 0xff) {
+ dev_dbg(dev, "Transcribing mark in block %u\n", block);
+ ret = chip->block_markbad(mtd, byte);
+ if (ret)
+ dev_err(dev, "Failed to mark block bad with "
+ "ret %d\n", ret);
+ }
+ }
+
+ /* Write the stamp that indicates we've transcribed the block marks. */
+ mx23_write_transcription_stamp(this);
+ return 0;
+}
+
+static int __devinit nand_boot_init(struct gpmi_nand_data *this)
+{
+ nand_boot_set_geometry(this);
+
+ /* This is ROM arch-specific initilization before the BBT scanning. */
+ if (GPMI_IS_MX23(this))
+ return mx23_boot_init(this);
+ return 0;
+}
+
+static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Free the temporary DMA memory for reading ID. */
+ gpmi_free_dma_buffer(this);
+
+ /* Set up the NFC geometry which is used by BCH. */
+ ret = bch_set_geometry(this);
+ if (ret) {
+ pr_err("set geometry ret : %d\n", ret);
+ return ret;
+ }
+
+ /* Alloc the new DMA buffers according to the pagesize and oobsize */
+ return gpmi_alloc_dma_buffer(this);
+}
+
+static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+ if (GPMI_IS_MX23(this))
+ this->swap_block_mark = false;
+ else
+ this->swap_block_mark = true;
+
+ /* Set up the medium geometry */
+ ret = gpmi_set_geometry(this);
+ if (ret)
+ return ret;
+
+ /* NAND boot init, depends on the gpmi_set_geometry(). */
+ return nand_boot_init(this);
+}
+
+static int gpmi_scan_bbt(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /* Prepare for the BBT scan. */
+ ret = gpmi_pre_bbt_scan(this);
+ if (ret)
+ return ret;
+
+ /* use the default BBT implementation */
+ return nand_default_bbt(mtd);
+}
+
+void gpmi_nfc_exit(struct gpmi_nand_data *this)
+{
+ nand_release(&this->mtd);
+ gpmi_free_dma_buffer(this);
+}
+
+static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
+{
+ struct gpmi_nand_platform_data *pdata = this->pdata;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ int ret;
+
+ /* init current chip */
+ this->current_chip = -1;
+
+ /* init the MTD data structures */
+ mtd->priv = chip;
+ mtd->name = "gpmi-nand";
+ mtd->owner = THIS_MODULE;
+
+ /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
+ chip->priv = this;
+ chip->select_chip = gpmi_select_chip;
+ chip->cmd_ctrl = gpmi_cmd_ctrl;
+ chip->dev_ready = gpmi_dev_ready;
+ chip->read_byte = gpmi_read_byte;
+ chip->read_buf = gpmi_read_buf;
+ chip->write_buf = gpmi_write_buf;
+ chip->ecc.read_page = gpmi_ecc_read_page;
+ chip->ecc.write_page = gpmi_ecc_write_page;
+ chip->ecc.read_oob = gpmi_ecc_read_oob;
+ chip->ecc.write_oob = gpmi_ecc_write_oob;
+ chip->scan_bbt = gpmi_scan_bbt;
+ chip->badblock_pattern = &gpmi_bbt_descr;
+ chip->block_markbad = gpmi_block_markbad;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 1;
+ chip->ecc.layout = &gpmi_hw_ecclayout;
+
+ /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
+ this->bch_geometry.payload_size = 1024;
+ this->bch_geometry.auxiliary_size = 128;
+ ret = gpmi_alloc_dma_buffer(this);
+ if (ret)
+ goto err_out;
+
+ ret = nand_scan(mtd, pdata->max_chip_count);
+ if (ret) {
+ pr_err("Chip scan failed\n");
+ goto err_out;
+ }
+
+ ret = mtd_device_parse_register(mtd, NULL, NULL,
+ pdata->partitions, pdata->partition_count);
+ if (ret)
+ goto err_out;
+ return 0;
+
+err_out:
+ gpmi_nfc_exit(this);
+ return ret;
+}
+
+static int __devinit gpmi_nand_probe(struct platform_device *pdev)
+{
+ struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct gpmi_nand_data *this;
+ int ret;
+
+ this = kzalloc(sizeof(*this), GFP_KERNEL);
+ if (!this) {
+ pr_err("Failed to allocate per-device memory\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, this);
+ this->pdev = pdev;
+ this->dev = &pdev->dev;
+ this->pdata = pdata;
+
+ if (pdata->platform_init) {
+ ret = pdata->platform_init();
+ if (ret)
+ goto platform_init_error;
+ }
+
+ ret = acquire_resources(this);
+ if (ret)
+ goto exit_acquire_resources;
+
+ ret = init_hardware(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ ret = gpmi_nfc_init(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ return 0;
+
+exit_nfc_init:
+ release_resources(this);
+platform_init_error:
+exit_acquire_resources:
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return ret;
+}
+
+static int __exit gpmi_nand_remove(struct platform_device *pdev)
+{
+ struct gpmi_nand_data *this = platform_get_drvdata(pdev);
+
+ gpmi_nfc_exit(this);
+ release_resources(this);
+ platform_set_drvdata(pdev, NULL);
+ kfree(this);
+ return 0;
+}
+
+static const struct platform_device_id gpmi_ids[] = {
+ {
+ .name = "imx23-gpmi-nand",
+ .driver_data = IS_MX23,
+ }, {
+ .name = "imx28-gpmi-nand",
+ .driver_data = IS_MX28,
+ }, {},
+};
+
+static struct platform_driver gpmi_nand_driver = {
+ .driver = {
+ .name = "gpmi-nand",
+ },
+ .probe = gpmi_nand_probe,
+ .remove = __exit_p(gpmi_nand_remove),
+ .id_table = gpmi_ids,
+};
+
+static int __init gpmi_nand_init(void)
+{
+ int err;
+
+ err = platform_driver_register(&gpmi_nand_driver);
+ if (err == 0)
+ printk(KERN_INFO "GPMI NAND driver registered. (IMX)\n");
+ else
+ pr_err("i.MX GPMI NAND driver registration failed\n");
+ return err;
+}
+
+static void __exit gpmi_nand_exit(void)
+{
+ platform_driver_unregister(&gpmi_nand_driver);
+}
+
+module_init(gpmi_nand_init);
+module_exit(gpmi_nand_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
new file mode 100644
index 00000000000..e023bccb778
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -0,0 +1,273 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
+#define __DRIVERS_MTD_NAND_GPMI_NAND_H
+
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <mach/dma.h>
+
+struct resources {
+ void *gpmi_regs;
+ void *bch_regs;
+ unsigned int bch_low_interrupt;
+ unsigned int bch_high_interrupt;
+ unsigned int dma_low_channel;
+ unsigned int dma_high_channel;
+ struct clk *clock;
+};
+
+/**
+ * struct bch_geometry - BCH geometry description.
+ * @gf_len: The length of Galois Field. (e.g., 13 or 14)
+ * @ecc_strength: A number that describes the strength of the ECC
+ * algorithm.
+ * @page_size: The size, in bytes, of a physical page, including
+ * both data and OOB.
+ * @metadata_size: The size, in bytes, of the metadata.
+ * @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
+ * the first chunk in the page includes both data and
+ * metadata, so it's a bit larger than this value.
+ * @ecc_chunk_count: The number of ECC chunks in the page,
+ * @payload_size: The size, in bytes, of the payload buffer.
+ * @auxiliary_size: The size, in bytes, of the auxiliary buffer.
+ * @auxiliary_status_offset: The offset into the auxiliary buffer at which
+ * the ECC status appears.
+ * @block_mark_byte_offset: The byte offset in the ECC-based page view at
+ * which the underlying physical block mark appears.
+ * @block_mark_bit_offset: The bit offset into the ECC-based page view at
+ * which the underlying physical block mark appears.
+ */
+struct bch_geometry {
+ unsigned int gf_len;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ unsigned int metadata_size;
+ unsigned int ecc_chunk_size;
+ unsigned int ecc_chunk_count;
+ unsigned int payload_size;
+ unsigned int auxiliary_size;
+ unsigned int auxiliary_status_offset;
+ unsigned int block_mark_byte_offset;
+ unsigned int block_mark_bit_offset;
+};
+
+/**
+ * struct boot_rom_geometry - Boot ROM geometry description.
+ * @stride_size_in_pages: The size of a boot block stride, in pages.
+ * @search_area_stride_exponent: The logarithm to base 2 of the size of a
+ * search area in boot block strides.
+ */
+struct boot_rom_geometry {
+ unsigned int stride_size_in_pages;
+ unsigned int search_area_stride_exponent;
+};
+
+/* DMA operations types */
+enum dma_ops_type {
+ DMA_FOR_COMMAND = 1,
+ DMA_FOR_READ_DATA,
+ DMA_FOR_WRITE_DATA,
+ DMA_FOR_READ_ECC_PAGE,
+ DMA_FOR_WRITE_ECC_PAGE
+};
+
+/**
+ * struct nand_timing - Fundamental timing attributes for NAND.
+ * @data_setup_in_ns: The data setup time, in nanoseconds. Usually the
+ * maximum of tDS and tWP. A negative value
+ * indicates this characteristic isn't known.
+ * @data_hold_in_ns: The data hold time, in nanoseconds. Usually the
+ * maximum of tDH, tWH and tREH. A negative value
+ * indicates this characteristic isn't known.
+ * @address_setup_in_ns: The address setup time, in nanoseconds. Usually
+ * the maximum of tCLS, tCS and tALS. A negative
+ * value indicates this characteristic isn't known.
+ * @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value
+ * indicates this characteristic isn't known.
+ * @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ */
+struct nand_timing {
+ int8_t data_setup_in_ns;
+ int8_t data_hold_in_ns;
+ int8_t address_setup_in_ns;
+ int8_t gpmi_sample_delay_in_ns;
+ int8_t tREA_in_ns;
+ int8_t tRLOH_in_ns;
+ int8_t tRHOH_in_ns;
+};
+
+struct gpmi_nand_data {
+ /* System Interface */
+ struct device *dev;
+ struct platform_device *pdev;
+ struct gpmi_nand_platform_data *pdata;
+
+ /* Resources */
+ struct resources resources;
+
+ /* Flash Hardware */
+ struct nand_timing timing;
+
+ /* BCH */
+ struct bch_geometry bch_geometry;
+ struct completion bch_done;
+
+ /* NAND Boot issue */
+ bool swap_block_mark;
+ struct boot_rom_geometry rom_geometry;
+
+ /* MTD / NAND */
+ struct nand_chip nand;
+ struct mtd_info mtd;
+
+ /* General-use Variables */
+ int current_chip;
+ unsigned int command_length;
+
+ /* passed from upper layer */
+ uint8_t *upper_buf;
+ int upper_len;
+
+ /* for DMA operations */
+ bool direct_dma_map_ok;
+
+ struct scatterlist cmd_sgl;
+ char *cmd_buffer;
+
+ struct scatterlist data_sgl;
+ char *data_buffer_dma;
+
+ void *page_buffer_virt;
+ dma_addr_t page_buffer_phys;
+ unsigned int page_buffer_size;
+
+ void *payload_virt;
+ dma_addr_t payload_phys;
+
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+
+ /* DMA channels */
+#define DMA_CHANS 8
+ struct dma_chan *dma_chans[DMA_CHANS];
+ struct mxs_dma_data dma_data;
+ enum dma_ops_type last_dma_type;
+ enum dma_ops_type dma_type;
+ struct completion dma_done;
+
+ /* private */
+ void *private;
+};
+
+/**
+ * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
+ * @data_setup_in_cycles: The data setup time, in cycles.
+ * @data_hold_in_cycles: The data hold time, in cycles.
+ * @address_setup_in_cycles: The address setup time, in cycles.
+ * @use_half_periods: Indicates the clock is running slowly, so the
+ * NFC DLL should use half-periods.
+ * @sample_delay_factor: The sample delay factor.
+ */
+struct gpmi_nfc_hardware_timing {
+ uint8_t data_setup_in_cycles;
+ uint8_t data_hold_in_cycles;
+ uint8_t address_setup_in_cycles;
+ bool use_half_periods;
+ uint8_t sample_delay_factor;
+};
+
+/**
+ * struct timing_threshod - Timing threshold
+ * @max_data_setup_cycles: The maximum number of data setup cycles that
+ * can be expressed in the hardware.
+ * @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
+ * for data read internal setup. In the Reference
+ * Manual, see the chapter "High-Speed NAND
+ * Timing" for more details.
+ * @max_sample_delay_factor: The maximum sample delay factor that can be
+ * expressed in the hardware.
+ * @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the
+ * sample delay DLL hardware can possibly work
+ * with (the DLL is unusable with longer periods).
+ * If the full-cycle period is greater than HALF
+ * this value, the DLL must be configured to use
+ * half-periods.
+ * @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the
+ * DLL can implement.
+ * @clock_frequency_in_hz: The clock frequency, in Hz, during the current
+ * I/O transaction. If no I/O transaction is in
+ * progress, this is the clock frequency during
+ * the most recent I/O transaction.
+ */
+struct timing_threshod {
+ const unsigned int max_chip_count;
+ const unsigned int max_data_setup_cycles;
+ const unsigned int internal_data_setup_in_ns;
+ const unsigned int max_sample_delay_factor;
+ const unsigned int max_dll_clock_period_in_ns;
+ const unsigned int max_dll_delay_in_ns;
+ unsigned long clock_frequency_in_hz;
+
+};
+
+/* Common Services */
+extern int common_nfc_set_geometry(struct gpmi_nand_data *);
+extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
+extern void prepare_data_dma(struct gpmi_nand_data *,
+ enum dma_data_direction dr);
+extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+
+/* GPMI-NAND helper function library */
+extern int gpmi_init(struct gpmi_nand_data *);
+extern void gpmi_clear_bch(struct gpmi_nand_data *);
+extern void gpmi_dump_info(struct gpmi_nand_data *);
+extern int bch_set_geometry(struct gpmi_nand_data *);
+extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
+extern int gpmi_send_command(struct gpmi_nand_data *);
+extern void gpmi_begin(struct gpmi_nand_data *);
+extern void gpmi_end(struct gpmi_nand_data *);
+extern int gpmi_read_data(struct gpmi_nand_data *);
+extern int gpmi_send_data(struct gpmi_nand_data *);
+extern int gpmi_send_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+extern int gpmi_read_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+
+/* BCH : Status Block Completion Codes */
+#define STATUS_GOOD 0x00
+#define STATUS_ERASED 0xff
+#define STATUS_UNCORRECTABLE 0xfe
+
+/* Use the platform_id to distinguish different Archs. */
+#define IS_MX23 0x1
+#define IS_MX28 0x2
+#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23)
+#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28)
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
new file mode 100644
index 00000000000..83431240e2f
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
@@ -0,0 +1,172 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_GPMI_REGS_H
+#define __GPMI_NAND_GPMI_REGS_H
+
+#define HW_GPMI_CTRL0 0x00000000
+#define HW_GPMI_CTRL0_SET 0x00000004
+#define HW_GPMI_CTRL0_CLR 0x00000008
+#define HW_GPMI_CTRL0_TOG 0x0000000c
+
+#define BP_GPMI_CTRL0_COMMAND_MODE 24
+#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE)
+#define BF_GPMI_CTRL0_COMMAND_MODE(v) \
+ (((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
+
+#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1
+
+/*
+ * Difference in LOCK_CS between imx23 and imx28 :
+ * This bit may impact the _POWER_ consumption. So some chips
+ * do not set it.
+ */
+#define MX23_BP_GPMI_CTRL0_LOCK_CS 22
+#define MX28_BP_GPMI_CTRL0_LOCK_CS 27
+#define LOCK_CS_ENABLE 0x1
+#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0
+
+/* Difference in CS between imx23 and imx28 */
+#define BP_GPMI_CTRL0_CS 20
+#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS)
+#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS)
+#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \
+ (GPMI_IS_MX23((x)) \
+ ? MX23_BM_GPMI_CTRL0_CS \
+ : MX28_BM_GPMI_CTRL0_CS))
+
+#define BP_GPMI_CTRL0_ADDRESS 17
+#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS)
+#define BF_GPMI_CTRL0_ADDRESS(v) \
+ (((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
+
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1
+
+#define BP_GPMI_CTRL0_XFER_COUNT 0
+#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT)
+#define BF_GPMI_CTRL0_XFER_COUNT(v) \
+ (((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE 0x00000010
+
+#define HW_GPMI_ECCCTRL 0x00000020
+#define HW_GPMI_ECCCTRL_SET 0x00000024
+#define HW_GPMI_ECCCTRL_CLR 0x00000028
+#define HW_GPMI_ECCCTRL_TOG 0x0000002c
+
+#define BP_GPMI_ECCCTRL_ECC_CMD 13
+#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD)
+#define BF_GPMI_ECCCTRL_ECC_CMD(v) \
+ (((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1
+
+#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
+
+#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \
+ (((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF
+
+#define HW_GPMI_ECCCOUNT 0x00000030
+#define HW_GPMI_PAYLOAD 0x00000040
+#define HW_GPMI_AUXILIARY 0x00000050
+#define HW_GPMI_CTRL1 0x00000060
+#define HW_GPMI_CTRL1_SET 0x00000064
+#define HW_GPMI_CTRL1_CLR 0x00000068
+#define HW_GPMI_CTRL1_TOG 0x0000006c
+
+#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
+
+#define BP_GPMI_CTRL1_DLL_ENABLE 17
+#define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE)
+
+#define BP_GPMI_CTRL1_HALF_PERIOD 16
+#define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD)
+
+#define BP_GPMI_CTRL1_RDN_DELAY 12
+#define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY)
+#define BF_GPMI_CTRL1_RDN_DELAY(v) \
+ (((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
+
+#define BM_GPMI_CTRL1_DEV_RESET (1 << 3)
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
+
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
+
+#define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1
+
+#define BM_GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define HW_GPMI_TIMING0 0x00000070
+
+#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+
+#define BP_GPMI_TIMING0_DATA_HOLD 8
+#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD)
+#define BF_GPMI_TIMING0_DATA_HOLD(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
+
+#define BP_GPMI_TIMING0_DATA_SETUP 0
+#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP)
+#define BF_GPMI_TIMING0_DATA_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1 0x00000080
+#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16
+
+#define HW_GPMI_TIMING2 0x00000090
+#define HW_GPMI_DATA 0x000000a0
+
+/* MX28 uses this to detect READY. */
+#define HW_GPMI_STAT 0x000000b0
+#define MX28_BP_GPMI_STAT_READY_BUSY 24
+#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY)
+#define MX28_BF_GPMI_STAT_READY_BUSY(v) \
+ (((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
+
+/* MX23 uses this to detect READY. */
+#define HW_GPMI_DEBUG 0x000000c0
+#define MX23_BP_GPMI_DEBUG_READY0 28
+#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0)
+#endif
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 02a03e67109..5dc6f0d92f1 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -81,9 +81,6 @@ static int h1910_device_ready(struct mtd_info *mtd)
static int __init h1910_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *nandaddr;
if (!machine_is_h1900())
@@ -136,22 +133,10 @@ static int __init h1910_init(void)
iounmap((void *)nandaddr);
return -ENXIO;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand");
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(h1910_nand_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
+ partition_info, NUM_PARTITIONS);
/* Return happy */
return 0;
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 6e813daed06..e2664073a89 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -251,10 +251,6 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
return 0;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = {"cmdline", NULL};
-#endif
-
static int jz_nand_ioremap_resource(struct platform_device *pdev,
const char *name, struct resource **res, void __iomem **base)
{
@@ -299,8 +295,6 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
struct nand_chip *chip;
struct mtd_info *mtd;
struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
- struct mtd_partition *partition_info;
- int num_partitions = 0;
nand = kzalloc(sizeof(*nand), GFP_KERNEL);
if (!nand) {
@@ -373,15 +367,9 @@ static int __devinit jz_nand_probe(struct platform_device *pdev)
goto err_gpio_free;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partition_info, 0);
-#endif
- if (num_partitions <= 0 && pdata) {
- num_partitions = pdata->num_partitions;
- partition_info = pdata->partitions;
- }
- ret = mtd_device_register(mtd, partition_info, num_partitions);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ pdata ? pdata->partitions : NULL,
+ pdata ? pdata->num_partitions : 0);
if (ret) {
dev_err(&pdev->dev, "Failed to add mtd device\n");
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index eb1fbac63eb..5ede6470634 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -131,8 +131,6 @@ struct mpc5121_nfc_prv {
static void mpc5121_nfc_done(struct mtd_info *mtd);
-static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
-
/* Read NFC register */
static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
{
@@ -656,13 +654,13 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
struct mpc5121_nfc_prv *prv;
struct resource res;
struct mtd_info *mtd;
- struct mtd_partition *parts;
struct nand_chip *chip;
unsigned long regs_paddr, regs_size;
const __be32 *chips_no;
int resettime = 0;
int retval = 0;
int rev, len;
+ struct mtd_part_parser_data ppdata;
/*
* Check SoC revision. This driver supports only NFC
@@ -727,6 +725,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
}
mtd->name = "MPC5121 NAND";
+ ppdata.of_node = dn;
chip->dev_ready = mpc5121_nfc_dev_ready;
chip->cmdfunc = mpc5121_nfc_command;
chip->read_byte = mpc5121_nfc_read_byte;
@@ -735,7 +734,8 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
chip->write_buf = mpc5121_nfc_write_buf;
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
- chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
/* Support external chip-select logic on ADS5121 board */
@@ -837,19 +837,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
dev_set_drvdata(dev, mtd);
/* Register device in MTD */
- retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
-#ifdef CONFIG_MTD_OF_PARTS
- if (retval == 0)
- retval = of_mtd_parse_partitions(dev, dn, &parts);
-#endif
- if (retval < 0) {
- dev_err(dev, "Error parsing MTD partitions!\n");
- devm_free_irq(dev, prv->irq, mtd);
- retval = -EINVAL;
- goto error;
- }
-
- retval = mtd_device_register(mtd, parts, retval);
+ retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (retval) {
dev_err(dev, "Error adding MTD device!\n");
devm_free_irq(dev, prv->irq, mtd);
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 90df34c4d26..74a43b818d0 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -41,7 +41,7 @@
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2() cpu_is_mx51()
+#define nfc_is_v3_2() (cpu_is_mx51() || cpu_is_mx53())
#define nfc_is_v3() nfc_is_v3_2()
/* Addresses for NFC registers */
@@ -143,7 +143,6 @@
struct mxc_nand_host {
struct mtd_info mtd;
struct nand_chip nand;
- struct mtd_partition *parts;
struct device *dev;
void *spare0;
@@ -350,8 +349,7 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
- __func__);
+ pr_debug("%s: INT not set\n", __func__);
}
}
@@ -371,7 +369,7 @@ static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
* waits for completion. */
static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+ pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
writew(cmd, NFC_V1_V2_FLASH_CMD);
writew(NFC_CMD, NFC_V1_V2_CONFIG2);
@@ -387,8 +385,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
udelay(1);
}
if (max_retries < 0)
- DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
- __func__);
+ pr_debug("%s: RESET failed\n", __func__);
} else {
/* Wait for operation to complete */
wait_op_done(host, useirq);
@@ -411,7 +408,7 @@ static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
* a NAND command. */
static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
{
- DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+ pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
writew(addr, NFC_V1_V2_FLASH_ADDR);
writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
@@ -561,8 +558,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
- DEBUG(MTD_DEBUG_LEVEL0,
- "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
return -1;
}
@@ -849,7 +845,7 @@ static void preset_v1_v2(struct mtd_info *mtd)
writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
} else if (nfc_is_v1()) {
writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
+ writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
} else
BUG();
@@ -932,8 +928,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
struct nand_chip *nand_chip = mtd->priv;
struct mxc_nand_host *host = nand_chip->priv;
- DEBUG(MTD_DEBUG_LEVEL3,
- "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
command, column, page_addr);
/* Reset command state information */
@@ -1044,7 +1039,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
struct mxc_nand_host *host;
struct resource *res;
- int err = 0, __maybe_unused nr_parts = 0;
+ int err = 0;
struct nand_ecclayout *oob_smallpage, *oob_largepage;
/* Allocate memory for MTD device structure and private data */
@@ -1179,7 +1174,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
}
init_completion(&host->op_completion);
@@ -1231,16 +1226,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
}
/* Register the partitions */
- nr_parts =
- parse_mtd_partitions(mtd, part_probes, &host->parts, 0);
- if (nr_parts > 0)
- mtd_device_register(mtd, host->parts, nr_parts);
- else if (pdata->parts)
- mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
- else {
- pr_info("Registering %s as whole device\n", mtd->name);
- mtd_device_register(mtd, NULL, 0);
- }
+ mtd_device_parse_register(mtd, part_probes, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, host);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index a46e9bb847b..3ed9c5e4d34 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -21,7 +21,7 @@
* TODO:
* Enable cached programming for 2k page size chips
* Check, if mtd->ecctype should be set to MTD_ECC_HW
- * if we have HW ecc support.
+ * if we have HW ECC support.
* The AG-AND chips have nice features for speed improvement,
* which are not supported yet. Read / program 4 pages in one go.
* BBT table is not serialized, has to be fixed
@@ -113,21 +113,19 @@ static int check_offs_len(struct mtd_info *mtd,
/* Start address must align on block boundary */
if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+ pr_debug("%s: unaligned address\n", __func__);
ret = -EINVAL;
}
/* Length must align on block boundary */
if (len & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
- __func__);
+ pr_debug("%s: length not block aligned\n", __func__);
ret = -EINVAL;
}
/* Do not allow past end of device */
if (ofs + len > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
- __func__);
+ pr_debug("%s: past end of device\n", __func__);
ret = -EINVAL;
}
@@ -136,9 +134,9 @@ static int check_offs_len(struct mtd_info *mtd,
/**
* nand_release_device - [GENERIC] release chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Deselect, release chip lock and wake up anyone waiting on the device
+ * Deselect, release chip lock and wake up anyone waiting on the device.
*/
static void nand_release_device(struct mtd_info *mtd)
{
@@ -157,9 +155,9 @@ static void nand_release_device(struct mtd_info *mtd)
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth
*/
static uint8_t nand_read_byte(struct mtd_info *mtd)
{
@@ -169,10 +167,11 @@ static uint8_t nand_read_byte(struct mtd_info *mtd)
/**
* nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
- * @mtd: MTD device structure
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
*
- * Default read function for 16bit buswith with
- * endianess conversion
*/
static uint8_t nand_read_byte16(struct mtd_info *mtd)
{
@@ -182,10 +181,9 @@ static uint8_t nand_read_byte16(struct mtd_info *mtd)
/**
* nand_read_word - [DEFAULT] read one word from the chip
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Default read function for 16bit buswith without
- * endianess conversion
+ * Default read function for 16bit buswidth without endianness conversion.
*/
static u16 nand_read_word(struct mtd_info *mtd)
{
@@ -195,8 +193,8 @@ static u16 nand_read_word(struct mtd_info *mtd)
/**
* nand_select_chip - [DEFAULT] control CE line
- * @mtd: MTD device structure
- * @chipnr: chipnumber to select, -1 for deselect
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
*
* Default select function for 1 chip devices.
*/
@@ -218,11 +216,11 @@ static void nand_select_chip(struct mtd_info *mtd, int chipnr)
/**
* nand_write_buf - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 8bit buswith
+ * Default write function for 8bit buswidth.
*/
static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -235,11 +233,11 @@ static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_read_buf - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 8bit buswith
+ * Default read function for 8bit buswidth.
*/
static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
@@ -252,11 +250,11 @@ static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
/**
* nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 8bit buswith
+ * Default verify function for 8bit buswidth.
*/
static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -271,11 +269,11 @@ static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_write_buf16 - [DEFAULT] write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
*
- * Default write function for 16bit buswith
+ * Default write function for 16bit buswidth.
*/
static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -291,11 +289,11 @@ static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_read_buf16 - [DEFAULT] read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store date
- * @len: number of bytes to read
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
*
- * Default read function for 16bit buswith
+ * Default read function for 16bit buswidth.
*/
static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
@@ -310,11 +308,11 @@ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
/**
* nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
*
- * Default verify function for 16bit buswith
+ * Default verify function for 16bit buswidth.
*/
static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
{
@@ -332,9 +330,9 @@ static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
/**
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
*
* Check, if the block is bad.
*/
@@ -344,7 +342,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
struct nand_chip *chip = mtd->priv;
u16 bad;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -384,11 +382,11 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
/**
* nand_default_block_markbad - [DEFAULT] mark a block bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
*
- * This is the default implementation, which can be overridden by
- * a hardware specific driver.
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver.
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
@@ -396,7 +394,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
uint8_t buf[2] = { 0, 0 };
int block, ret, i = 0;
- if (chip->options & NAND_BBT_SCANLASTPAGE)
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
ofs += mtd->erasesize - mtd->writesize;
/* Get block number */
@@ -404,33 +402,31 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
if (chip->bbt)
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
- /* Do we have a flash based bad block table ? */
- if (chip->options & NAND_USE_FLASH_BBT)
+ /* Do we have a flash based bad block table? */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
ret = nand_update_bbt(mtd, ofs);
else {
+ struct mtd_oob_ops ops;
+
nand_get_device(chip, mtd, FL_WRITING);
- /* Write to first two pages and to byte 1 and 6 if necessary.
- * If we write to more than one location, the first error
- * encountered quits the procedure. We write two bytes per
- * location, so we dont have to mess with 16 bit access.
+ /*
+ * Write to first two pages if necessary. If we write to more
+ * than one location, the first error encountered quits the
+ * procedure. We write two bytes per location, so we dont have
+ * to mess with 16 bit access.
*/
+ ops.len = ops.ooblen = 2;
+ ops.datbuf = NULL;
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos & ~0x01;
+ ops.mode = MTD_OPS_PLACE_OOB;
do {
- chip->ops.len = chip->ops.ooblen = 2;
- chip->ops.datbuf = NULL;
- chip->ops.oobbuf = buf;
- chip->ops.ooboffs = chip->badblockpos & ~0x01;
-
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+ ret = nand_do_write_oob(mtd, ofs, &ops);
- if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
- chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
- & ~0x01;
- ret = nand_do_write_oob(mtd, ofs, &chip->ops);
- }
i++;
ofs += mtd->writesize;
- } while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+ } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) &&
i < 2);
nand_release_device(mtd);
@@ -443,16 +439,16 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
/**
* nand_check_wp - [GENERIC] check if the chip is write protected
- * @mtd: MTD device structure
- * Check, if the device is write protected
+ * @mtd: MTD device structure
*
- * The function expects, that the device is already selected
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
*/
static int nand_check_wp(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- /* broken xD cards report WP despite being writable */
+ /* Broken xD cards report WP despite being writable */
if (chip->options & NAND_BROKEN_XD)
return 0;
@@ -463,10 +459,10 @@ static int nand_check_wp(struct mtd_info *mtd)
/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
- * @mtd: MTD device structure
- * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
- * @allowbbt: 1, if its allowed to access the bbt area
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
@@ -485,8 +481,8 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
/**
* panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
+ * @mtd: MTD device structure
+ * @timeo: Timeout
*
* Helper function for nand_wait_ready used when needing to wait in interrupt
* context.
@@ -505,10 +501,7 @@ static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
}
}
-/*
- * Wait for the ready pin, after a command
- * The timeout is catched later.
- */
+/* Wait for the ready pin, after a command. The timeout is caught later. */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -519,7 +512,7 @@ void nand_wait_ready(struct mtd_info *mtd)
return panic_nand_wait_ready(mtd, 400);
led_trigger_event(nand_led_trigger, LED_FULL);
- /* wait until command is processed or timeout occures */
+ /* Wait until command is processed or timeout occurs */
do {
if (chip->dev_ready(mtd))
break;
@@ -531,13 +524,13 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
/**
* nand_command - [DEFAULT] Send command to NAND device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
- * Send command to NAND device. This function is used for small page
- * devices (256/512 Bytes per page)
+ * Send command to NAND device. This function is used for small page devices
+ * (256/512 Bytes per page).
*/
static void nand_command(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
@@ -545,9 +538,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
register struct nand_chip *chip = mtd->priv;
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- /*
- * Write out the command to the device.
- */
+ /* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
int readcmd;
@@ -567,9 +558,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
}
chip->cmd_ctrl(mtd, command, ctrl);
- /*
- * Address cycle, when necessary
- */
+ /* Address cycle, when necessary */
ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
/* Serially input address */
if (column != -1) {
@@ -590,8 +579,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status and sequential in needs no delay
+ * Program and erase have their own busy handlers status and sequential
+ * in needs no delay
*/
switch (command) {
@@ -625,8 +614,10 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
return;
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
@@ -634,14 +625,14 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
/**
* nand_command_lp - [DEFAULT] Send command to NAND large page device
- * @mtd: MTD device structure
- * @command: the command to be sent
- * @column: the column address for this command, -1 if none
- * @page_addr: the page address for this command, -1 if none
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
*
* Send command to NAND device. This is the version for the new large page
- * devices We dont have the separate regions as we have in the small page
- * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
*/
static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
@@ -683,8 +674,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
/*
- * program and erase have their own busy handlers
- * status, sequential in, and deplete1 need no delay
+ * Program and erase have their own busy handlers status, sequential
+ * in, and deplete1 need no delay.
*/
switch (command) {
@@ -698,14 +689,12 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
case NAND_CMD_DEPLETE1:
return;
- /*
- * read error status commands require only a short delay
- */
case NAND_CMD_STATUS_ERROR:
case NAND_CMD_STATUS_ERROR0:
case NAND_CMD_STATUS_ERROR1:
case NAND_CMD_STATUS_ERROR2:
case NAND_CMD_STATUS_ERROR3:
+ /* Read error status commands require only a short delay */
udelay(chip->chip_delay);
return;
@@ -739,7 +728,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
default:
/*
* If we don't have access to the busy pin, we apply the given
- * command delay
+ * command delay.
*/
if (!chip->dev_ready) {
udelay(chip->chip_delay);
@@ -747,8 +736,10 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
}
}
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
ndelay(100);
nand_wait_ready(mtd);
@@ -756,25 +747,25 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
/**
* panic_nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Used when in panic, no locks are taken.
*/
static void panic_nand_get_device(struct nand_chip *chip,
struct mtd_info *mtd, int new_state)
{
- /* Hardware controller shared among independend devices */
+ /* Hardware controller shared among independent devices */
chip->controller->active = chip;
chip->state = new_state;
}
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @mtd: MTD device structure
- * @new_state: the state which is requested
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
*
* Get the device and lock it for exclusive access
*/
@@ -812,10 +803,10 @@ retry:
}
/**
- * panic_nand_wait - [GENERIC] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
- * @timeo: Timeout
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
*
* Wait for command done. This is a helper function for nand_wait used when
* we are in interrupt context. May happen when in panic and trying to write
@@ -838,13 +829,13 @@ static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_wait - [DEFAULT] wait until the command is done
- * @mtd: MTD device structure
- * @chip: NAND chip structure
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
*
- * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to
- * general NAND and SmartMedia specs
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
*/
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
@@ -859,8 +850,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
led_trigger_event(nand_led_trigger, LED_FULL);
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in any
+ * case on any machine.
+ */
ndelay(100);
if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
@@ -890,16 +883,15 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
/**
* __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
- * upper boundary address
- * when = 1, unlock the range of blocks outside the boundaries
- * of the lower and upper boundary address
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ * upper boundary address
+ * when = 1, unlock the range of blocks outside the boundaries
+ * of the lower and upper boundary address
*
- * return - unlock status
+ * Returs unlock status.
*/
static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
uint64_t len, int invert)
@@ -919,10 +911,9 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
}
@@ -932,12 +923,11 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
/**
* nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - unlock status
+ * Returns unlock status.
*/
int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
@@ -945,7 +935,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
int chipnr;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
@@ -964,7 +954,7 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
ret = -EIO;
goto out;
@@ -981,18 +971,16 @@ EXPORT_SYMBOL(nand_unlock);
/**
* nand_lock - [REPLACEABLE] locks all blocks present in the device
- *
* @mtd: mtd info
* @ofs: offset to start unlock from
* @len: length to unlock
*
- * return - lock status
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
*
- * This feature is not supported in many NAND parts. 'Micron' NAND parts
- * do have this feature, but it allows only to lock all blocks, not for
- * specified range for block.
- *
- * Implementing 'lock' feature by making use of 'unlock', for now.
+ * Returns lock status.
*/
int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
@@ -1000,7 +988,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
int chipnr, status, page;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
__func__, (unsigned long long)ofs, len);
if (check_offs_len(mtd, ofs, len))
@@ -1015,7 +1003,7 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ pr_debug("%s: device is write protected!\n",
__func__);
status = MTD_ERASE_FAILED;
ret = -EIO;
@@ -1028,10 +1016,9 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
/* Call wait ready function */
status = chip->waitfunc(mtd, chip);
- udelay(1000);
/* See if device thinks it succeeded */
if (status & 0x01) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ pr_debug("%s: error status = 0x%08x\n",
__func__, status);
ret = -EIO;
goto out;
@@ -1047,13 +1034,13 @@ out:
EXPORT_SYMBOL(nand_lock);
/**
- * nand_read_page_raw - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1064,11 +1051,11 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
@@ -1107,11 +1094,11 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
}
/**
- * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1148,12 +1135,12 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @data_offs: offset of requested data within the page
- * @readlen: data length
- * @bufpoi: buffer to store read data
+ * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
@@ -1166,12 +1153,12 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
int index = 0;
- /* Column address wihin the page aligned to ECC size (256bytes). */
+ /* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
end_step = (data_offs + readlen - 1) / chip->ecc.size;
num_steps = end_step - start_step + 1;
- /* Data size aligned to ECC ecc.size*/
+ /* Data size aligned to ECC ecc.size */
datafrag_len = num_steps * chip->ecc.size;
eccfrag_len = num_steps * chip->ecc.bytes;
@@ -1183,13 +1170,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
p = bufpoi + data_col_addr;
chip->read_buf(mtd, p, datafrag_len);
- /* Calculate ECC */
+ /* Calculate ECC */
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
- /* The performance is faster if to position offsets
- according to ecc.pos. Let make sure here that
- there are no gaps in ecc positions */
+ /*
+ * The performance is faster if we position offsets according to
+ * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+ */
for (i = 0; i < eccfrag_len - 1; i++) {
if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
eccpos[i + start_step * chip->ecc.bytes + 1]) {
@@ -1201,8 +1189,10 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
} else {
- /* send the command to read the particular ecc bytes */
- /* take care about buswidth alignment in read_buf */
+ /*
+ * Send the command to read the particular ECC bytes take care
+ * about buswidth alignment in read_buf.
+ */
index = start_step * chip->ecc.bytes;
aligned_pos = eccpos[index] & ~(busw - 1);
@@ -1235,13 +1225,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Not for syndrome calculating ecc controllers which need a special oob layout
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1280,18 +1270,17 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * Hardware ECC for large page chips, require OOB to be read first.
- * For this ECC mode, the write_page method is re-used from ECC_HW.
- * These methods read/write ECC from the OOB area, unlike the
- * ECC_HW_SYNDROME support with multiple ECC steps, follows the
- * "infix ECC" scheme and reads/writes ECC from the data area, by
- * overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
*/
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
@@ -1329,14 +1318,14 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
}
/**
- * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: buffer to store read data
- * @page: page number to read
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -1384,29 +1373,29 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_transfer_oob - [Internal] Transfer oob to client buffer
- * @chip: nand chip structure
- * @oob: oob destination address
- * @ops: oob ops structure
- * @len: size of oob to transfer
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
*/
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(oob, chip->oob_poi + ops->ooboffs, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, roffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Read request not from offset 0 ? */
+ /* Read request not from offset 0? */
if (unlikely(roffs)) {
if (roffs >= free->length) {
roffs -= free->length;
@@ -1432,11 +1421,10 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
}
/**
- * nand_do_read_ops - [Internal] Read data with ECC
- *
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob ops structure
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
*
* Internal function. Called with chip held.
*/
@@ -1451,7 +1439,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
- uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+ uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
@@ -1473,7 +1461,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
- /* Is the current page in the buffer ? */
+ /* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
@@ -1483,7 +1471,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
}
/* Now read the page into the buffer */
- if (unlikely(ops->mode == MTD_OOB_RAW))
+ if (unlikely(ops->mode == MTD_OPS_RAW))
ret = chip->ecc.read_page_raw(mtd, chip,
bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
@@ -1492,14 +1480,22 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
page);
- if (ret < 0)
+ if (ret < 0) {
+ if (!aligned)
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
break;
+ }
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_SUBPAGE_READ(chip) && !oob &&
- !(mtd->ecc_stats.failed - stats.failed))
+ !(mtd->ecc_stats.failed - stats.failed) &&
+ (ops->mode != MTD_OPS_RAW))
chip->pagebuf = realpage;
+ else
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
memcpy(buf, chip->buffers->databuf + col, bytes);
}
@@ -1539,7 +1535,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
if (!readlen)
break;
- /* For subsequent reads align to page boundary. */
+ /* For subsequent reads align to page boundary */
col = 0;
/* Increment page address */
realpage++;
@@ -1552,8 +1548,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
@@ -1574,18 +1571,19 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/**
* nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
*
- * Get hold of the chip and call nand_do_read
+ * Get hold of the chip and call nand_do_read.
*/
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
@@ -1596,13 +1594,14 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
nand_get_device(chip, mtd, FL_READING);
- chip->ops.len = len;
- chip->ops.datbuf = buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_read_ops(mtd, from, &chip->ops);
+ ret = nand_do_read_ops(mtd, from, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
@@ -1610,11 +1609,11 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
}
/**
- * nand_read_oob_std - [REPLACABLE] the most common OOB data read function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
@@ -1628,12 +1627,12 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
* with syndromes
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to read
- * @sndcmd: flag whether to issue read command or not
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
*/
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page, int sndcmd)
@@ -1667,10 +1666,10 @@ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_oob_std - [REPLACABLE] the most common OOB data write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
int page)
@@ -1690,11 +1689,11 @@ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC
- * with syndrome - only for large page flash !
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @page: page number to write
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
*/
static int nand_write_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, int page)
@@ -1749,34 +1748,37 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
}
/**
- * nand_do_read_oob - [Intern] NAND read out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operations description structure
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
*
- * NAND read out-of-band data from the spare area
+ * NAND read out-of-band data from the spare area.
*/
static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
int page, realpage, chipnr, sndcmd = 1;
struct nand_chip *chip = mtd->priv;
+ struct mtd_ecc_stats stats;
int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
int readlen = ops->ooblen;
int len;
uint8_t *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+ pr_debug("%s: from = 0x%08Lx, len = %i\n",
__func__, (unsigned long long)from, readlen);
- if (ops->mode == MTD_OOB_AUTO)
+ stats = mtd->ecc_stats;
+
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
- "outside oob\n", __func__);
+ pr_debug("%s: attempt to start read outside oob\n",
+ __func__);
return -EINVAL;
}
@@ -1784,8 +1786,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
if (unlikely(from >= mtd->size ||
ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
(from >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
- "of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
@@ -1797,7 +1799,10 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
page = realpage & chip->pagemask;
while (1) {
- sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+ if (ops->mode == MTD_OPS_RAW)
+ sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+ else
+ sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
@@ -1830,24 +1835,29 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
chip->select_chip(mtd, chipnr);
}
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
+ /*
+ * Check, if the chip supports auto page increment or if we
+ * have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
ops->oobretlen = ops->ooblen;
- return 0;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
}
/**
* nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
*
- * NAND read data and/or out-of-band data
+ * NAND read data and/or out-of-band data.
*/
static int nand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
@@ -1859,17 +1869,17 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
/* Do not allow reads past end of device */
if (ops->datbuf && (from + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
- "beyond end of device\n", __func__);
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_READING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
@@ -1888,12 +1898,12 @@ out:
/**
- * nand_write_page_raw - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * Not for syndrome calculating ecc controllers, which use a special oob layout
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
*/
static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1903,10 +1913,10 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_page_raw_syndrome - [Intern] raw page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
* We need a special oob layout and handling even when ECC isn't checked.
*/
@@ -1942,10 +1952,10 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
chip->write_buf(mtd, oob, size);
}
/**
- * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1957,7 +1967,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *p = buf;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- /* Software ecc calculation */
+ /* Software ECC calculation */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -1968,10 +1978,10 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*/
static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1996,13 +2006,13 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
- * @mtd: mtd info structure
- * @chip: nand chip info structure
- * @buf: data buffer
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
*
- * The hw generator calculates the error syndrome automatically. Therefor
- * we need a special oob layout and handling.
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
*/
static void nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf)
@@ -2041,12 +2051,12 @@ static void nand_write_page_syndrome(struct mtd_info *mtd,
/**
* nand_write_page - [REPLACEABLE] write one page
- * @mtd: MTD device structure
- * @chip: NAND chip descriptor
- * @buf: the data to write
- * @page: page number to write
- * @cached: cached programming
- * @raw: use _raw version of write_page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int page, int cached, int raw)
@@ -2061,8 +2071,8 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->ecc.write_page(mtd, chip, buf);
/*
- * Cached progamming disabled for now, Not sure if its worth the
- * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ * Cached progamming disabled for now. Not sure if it's worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
*/
cached = 0;
@@ -2072,7 +2082,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
status = chip->waitfunc(mtd, chip);
/*
* See if operation failed and additional status checks are
- * available
+ * available.
*/
if ((status & NAND_STATUS_FAIL) && (chip->errstat))
status = chip->errstat(mtd, chip, FL_WRITING, status,
@@ -2096,29 +2106,37 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
- * nand_fill_oob - [Internal] Transfer client buffer to oob
- * @chip: nand chip structure
- * @oob: oob data buffer
- * @len: oob data write length
- * @ops: oob ops structure
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
+ struct nand_chip *chip = mtd->priv;
+
+ /*
+ * Initialise to all 0xFF, to avoid the possibility of left over OOB
+ * data from a previous OOB read.
+ */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
memcpy(chip->oob_poi + ops->ooboffs, oob, len);
return oob + len;
- case MTD_OOB_AUTO: {
+ case MTD_OPS_AUTO_OOB: {
struct nand_oobfree *free = chip->ecc.layout->oobfree;
uint32_t boffs = 0, woffs = ops->ooboffs;
size_t bytes = 0;
for (; free->length && len; free++, len -= bytes) {
- /* Write request not from offset 0 ? */
+ /* Write request not from offset 0? */
if (unlikely(woffs)) {
if (woffs >= free->length) {
woffs -= free->length;
@@ -2146,12 +2164,12 @@ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
/**
- * nand_do_write_ops - [Internal] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operations description structure
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2161,7 +2179,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
uint32_t writelen = ops->len;
uint32_t oobwritelen = ops->ooblen;
- uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
mtd->oobavail : mtd->oobsize;
uint8_t *oob = ops->oobbuf;
@@ -2172,10 +2190,10 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (!writelen)
return 0;
- /* reject writes, which are not page aligned */
+ /* Reject writes, which are not page aligned */
if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "%s: Attempt to write not "
- "page aligned data\n", __func__);
+ pr_notice("%s: attempt to write non page aligned data\n",
+ __func__);
return -EINVAL;
}
@@ -2201,10 +2219,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
(chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
- /* If we're not given explicit OOB data, let it be 0xFF */
- if (likely(!oob))
- memset(chip->oob_poi, 0xff, mtd->oobsize);
-
/* Don't allow multipage oob writes with offset */
if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
return -EINVAL;
@@ -2214,7 +2228,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
- /* Partial page write ? */
+ /* Partial page write? */
if (unlikely(column || writelen < (mtd->writesize - 1))) {
cached = 0;
bytes = min_t(int, bytes - column, (int) writelen);
@@ -2226,12 +2240,15 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (unlikely(oob)) {
size_t len = min(oobwritelen, oobmaxlen);
- oob = nand_fill_oob(chip, oob, len, ops);
+ oob = nand_fill_oob(mtd, oob, len, ops);
oobwritelen -= len;
+ } else {
+ /* We still need to erase leftover OOB data */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
}
ret = chip->write_page(mtd, chip, wbuf, page, cached,
- (ops->mode == MTD_OOB_RAW));
+ (ops->mode == MTD_OPS_RAW));
if (ret)
break;
@@ -2260,11 +2277,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
/**
* panic_nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
* NAND write with ECC. Used when performing writes in interrupt context, this
* may for example be called by mtdoops when writing an oops while in panic.
@@ -2273,6 +2290,7 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
@@ -2281,36 +2299,38 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
if (!len)
return 0;
- /* Wait for the device to get ready. */
+ /* Wait for the device to get ready */
panic_nand_wait(mtd, chip, 400);
- /* Grab the device. */
+ /* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
return ret;
}
/**
* nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
*
- * NAND write with ECC
+ * NAND write with ECC.
*/
static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const uint8_t *buf)
{
struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
int ret;
/* Do not allow reads past end of device */
@@ -2321,13 +2341,14 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
nand_get_device(chip, mtd, FL_WRITING);
- chip->ops.len = len;
- chip->ops.datbuf = (uint8_t *)buf;
- chip->ops.oobbuf = NULL;
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.oobbuf = NULL;
+ ops.mode = 0;
- ret = nand_do_write_ops(mtd, to, &chip->ops);
+ ret = nand_do_write_ops(mtd, to, &ops);
- *retlen = chip->ops.retlen;
+ *retlen = ops.retlen;
nand_release_device(mtd);
@@ -2336,11 +2357,11 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
/**
* nand_do_write_oob - [MTD Interface] NAND write out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*
- * NAND write out-of-band
+ * NAND write out-of-band.
*/
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2348,24 +2369,24 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
int chipnr, page, status, len;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+ pr_debug("%s: to = 0x%08x, len = %i\n",
__func__, (unsigned int)to, (int)ops->ooblen);
- if (ops->mode == MTD_OOB_AUTO)
+ if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
else
len = mtd->oobsize;
/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
- "past end of page\n", __func__);
+ pr_debug("%s: attempt to write past end of page\n",
+ __func__);
return -EINVAL;
}
if (unlikely(ops->ooboffs >= len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
- "write outside oob\n", __func__);
+ pr_debug("%s: attempt to start write outside oob\n",
+ __func__);
return -EINVAL;
}
@@ -2374,8 +2395,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
ops->ooboffs + ops->ooblen >
((mtd->size >> chip->page_shift) -
(to >> chip->page_shift)) * len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
@@ -2401,10 +2422,12 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
if (page == chip->pagebuf)
chip->pagebuf = -1;
- memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
- status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
- memset(chip->oob_poi, 0xff, mtd->oobsize);
+ nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+ if (ops->mode == MTD_OPS_RAW)
+ status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+ else
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
if (status)
return status;
@@ -2416,9 +2439,9 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
/**
* nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @to: offset to write to
- * @ops: oob operation description structure
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
*/
static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
@@ -2430,17 +2453,17 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
/* Do not allow writes past end of device */
if (ops->datbuf && (to + ops->len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
- "end of device\n", __func__);
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
return -EINVAL;
}
nand_get_device(chip, mtd, FL_WRITING);
switch (ops->mode) {
- case MTD_OOB_PLACE:
- case MTD_OOB_AUTO:
- case MTD_OOB_RAW:
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
break;
default:
@@ -2458,11 +2481,11 @@ out:
}
/**
- * single_erease_cmd - [GENERIC] NAND standard block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * Standard erase command for NAND chips
+ * Standard erase command for NAND chips.
*/
static void single_erase_cmd(struct mtd_info *mtd, int page)
{
@@ -2473,12 +2496,11 @@ static void single_erase_cmd(struct mtd_info *mtd, int page)
}
/**
- * multi_erease_cmd - [GENERIC] AND specific block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
+ * multi_erase_cmd - [GENERIC] AND specific block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
*
- * AND multi block erase command function
- * Erase 4 consecutive blocks
+ * AND multi block erase command function. Erase 4 consecutive blocks.
*/
static void multi_erase_cmd(struct mtd_info *mtd, int page)
{
@@ -2493,10 +2515,10 @@ static void multi_erase_cmd(struct mtd_info *mtd, int page)
/**
* nand_erase - [MTD Interface] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
+ * @mtd: MTD device structure
+ * @instr: erase instruction
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
@@ -2505,12 +2527,12 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
#define BBT_PAGE_MASK 0xffffff3f
/**
- * nand_erase_nand - [Internal] erase block(s)
- * @mtd: MTD device structure
- * @instr: erase instruction
- * @allowbbt: allow erasing the bbt area
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
*
- * Erase one ore more blocks
+ * Erase one ore more blocks.
*/
int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt)
@@ -2521,9 +2543,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
unsigned int bbt_masked_page = 0xffffffff;
loff_t len;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)instr->addr,
- (unsigned long long)instr->len);
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
@@ -2545,8 +2567,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* Check, if it is write protected */
if (nand_check_wp(mtd)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
- __func__);
+ pr_debug("%s: device is write protected!\n",
+ __func__);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
@@ -2555,7 +2577,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
* If BBT requires refresh, set the BBT page mask to see if the BBT
* should be rewritten. Otherwise the mask is set to 0xffffffff which
* can not be matched. This is also done when the bbt is actually
- * erased to avoid recusrsive updates
+ * erased to avoid recursive updates.
*/
if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
@@ -2566,20 +2588,18 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
instr->state = MTD_ERASING;
while (len) {
- /*
- * heck if we have a bad block, we do not erase bad blocks !
- */
+ /* Heck if we have a bad block, we do not erase bad blocks! */
if (nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
- printk(KERN_WARNING "%s: attempt to erase a bad block "
- "at page 0x%08x\n", __func__, page);
+ pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
goto erase_exit;
}
/*
* Invalidate the page cache, if we erase the block which
- * contains the current cached page
+ * contains the current cached page.
*/
if (page <= chip->pagebuf && chip->pagebuf <
(page + pages_per_block))
@@ -2599,8 +2619,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/* See if block erase succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
- "page 0x%08x\n", __func__, page);
+ pr_debug("%s: failed erase, page 0x%08x\n",
+ __func__, page);
instr->state = MTD_ERASE_FAILED;
instr->fail_addr =
((loff_t)page << chip->page_shift);
@@ -2609,7 +2629,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/*
* If BBT requires refresh, set the BBT rewrite flag to the
- * page being erased
+ * page being erased.
*/
if (bbt_masked_page != 0xffffffff &&
(page & BBT_PAGE_MASK) == bbt_masked_page)
@@ -2628,7 +2648,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/*
* If BBT requires refresh and BBT-PERCHIP, set the BBT
- * page mask to see if this BBT should be rewritten
+ * page mask to see if this BBT should be rewritten.
*/
if (bbt_masked_page != 0xffffffff &&
(chip->bbt_td->options & NAND_BBT_PERCHIP))
@@ -2651,7 +2671,7 @@ erase_exit:
/*
* If BBT requires refresh and erase was successful, rewrite any
- * selected bad block tables
+ * selected bad block tables.
*/
if (bbt_masked_page == 0xffffffff || ret)
return ret;
@@ -2659,10 +2679,10 @@ erase_exit:
for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
if (!rewrite_bbt[chipnr])
continue;
- /* update the BBT for chip */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
- "(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
- rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
+ /* Update the BBT for chip */
+ pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n",
+ __func__, chipnr, rewrite_bbt[chipnr],
+ chip->bbt_td->pages[chipnr]);
nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
@@ -2672,15 +2692,15 @@ erase_exit:
/**
* nand_sync - [MTD Interface] sync
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * Sync is actually a wait for chip ready function
+ * Sync is actually a wait for chip ready function.
*/
static void nand_sync(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
+ pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_SYNCING);
@@ -2690,8 +2710,8 @@ static void nand_sync(struct mtd_info *mtd)
/**
* nand_block_isbad - [MTD Interface] Check if block at offset is bad
- * @mtd: MTD device structure
- * @offs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
@@ -2704,8 +2724,8 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
/**
* nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
- * @mtd: MTD device structure
- * @ofs: offset relative to mtd start
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
*/
static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
@@ -2714,7 +2734,7 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
ret = nand_block_isbad(mtd, ofs);
if (ret) {
- /* If it was bad already, return success and do nothing. */
+ /* If it was bad already, return success and do nothing */
if (ret > 0)
return 0;
return ret;
@@ -2725,7 +2745,7 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
/**
* nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static int nand_suspend(struct mtd_info *mtd)
{
@@ -2736,7 +2756,7 @@ static int nand_suspend(struct mtd_info *mtd)
/**
* nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*/
static void nand_resume(struct mtd_info *mtd)
{
@@ -2745,13 +2765,11 @@ static void nand_resume(struct mtd_info *mtd)
if (chip->state == FL_PM_SUSPENDED)
nand_release_device(mtd);
else
- printk(KERN_ERR "%s called for a chip which is not "
- "in suspended state\n", __func__);
+ pr_err("%s called for a chip which is not in suspended state\n",
+ __func__);
}
-/*
- * Set default functions
- */
+/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
/* check for proper chip_delay setup, set 20us if not */
@@ -2793,23 +2811,21 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
}
-/*
- * sanitize ONFI strings so we can safely print them
- */
+/* Sanitize ONFI strings so we can safely print them */
static void sanitize_string(uint8_t *s, size_t len)
{
ssize_t i;
- /* null terminate */
+ /* Null terminate */
s[len - 1] = 0;
- /* remove non printable chars */
+ /* Remove non printable chars */
for (i = 0; i < len - 1; i++) {
if (s[i] < ' ' || s[i] > 127)
s[i] = '?';
}
- /* remove trailing spaces */
+ /* Remove trailing spaces */
strim(s);
}
@@ -2826,28 +2842,28 @@ static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
}
/*
- * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
- int busw)
+ int *busw)
{
struct nand_onfi_params *p = &chip->onfi_params;
int i;
int val;
- /* try ONFI for unknow chip or LP */
+ /* Try ONFI for unknown chip or LP */
chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- printk(KERN_INFO "ONFI flash detected\n");
+ pr_info("ONFI flash detected\n");
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
le16_to_cpu(p->crc)) {
- printk(KERN_INFO "ONFI param page %d valid\n", i);
+ pr_info("ONFI param page %d valid\n", i);
break;
}
}
@@ -2855,7 +2871,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
if (i == 3)
return 0;
- /* check version */
+ /* Check version */
val = le16_to_cpu(p->revision);
if (val & (1 << 5))
chip->onfi_version = 23;
@@ -2871,8 +2887,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->onfi_version = 0;
if (!chip->onfi_version) {
- printk(KERN_INFO "%s: unsupported ONFI version: %d\n",
- __func__, val);
+ pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
return 0;
}
@@ -2884,9 +2899,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
- busw = 0;
+ *busw = 0;
if (le16_to_cpu(p->features) & 1)
- busw = NAND_BUSWIDTH_16;
+ *busw = NAND_BUSWIDTH_16;
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= (NAND_NO_READRDY |
@@ -2896,7 +2911,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
}
/*
- * Get the flash and manufacturer id and lookup if the type is supported
+ * Get the flash and manufacturer id and lookup if the type is supported.
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
@@ -2913,7 +2928,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/*
* Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
- * after power-up
+ * after power-up.
*/
chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
@@ -2924,7 +2939,8 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
*maf_id = chip->read_byte(mtd);
*dev_id = chip->read_byte(mtd);
- /* Try again to make sure, as some systems the bus-hold or other
+ /*
+ * Try again to make sure, as some systems the bus-hold or other
* interface concerns can cause random data which looks like a
* possibly credible NAND flash to appear. If the two results do
* not match, ignore the device completely.
@@ -2936,9 +2952,9 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
id_data[i] = chip->read_byte(mtd);
if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
- printk(KERN_INFO "%s: second ID read did not match "
- "%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, *dev_id, id_data[0], id_data[1]);
+ pr_info("%s: second ID read did not match "
+ "%02x,%02x against %02x,%02x\n", __func__,
+ *maf_id, *dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
@@ -2952,7 +2968,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
/* Check is chip is ONFI compliant */
- ret = nand_flash_detect_onfi(mtd, chip, busw);
+ ret = nand_flash_detect_onfi(mtd, chip, &busw);
if (ret)
goto ident_done;
}
@@ -2973,7 +2989,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->chipsize = (uint64_t)type->chipsize << 20;
if (!type->pagesize && chip->init_size) {
- /* set the pagesize, oobsize, erasesize by the driver*/
+ /* Set the pagesize, oobsize, erasesize by the driver */
busw = chip->init_size(mtd, chip, id_data);
} else if (!type->pagesize) {
int extid;
@@ -3033,7 +3049,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
}
} else {
/*
- * Old devices have chip data hardcoded in the device id table
+ * Old devices have chip data hardcoded in the device id table.
*/
mtd->erasesize = type->erasesize;
mtd->writesize = type->pagesize;
@@ -3043,7 +3059,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/*
* Check for Spansion/AMD ID + repeating 5th, 6th byte since
* some Spansion chips have erasesize that conflicts with size
- * listed in nand_ids table
+ * listed in nand_ids table.
* Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
*/
if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
@@ -3057,15 +3073,16 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->options &= ~NAND_CHIPOPTIONS_MSK;
chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
- /* Check if chip is a not a samsung device. Do not clear the
- * options for chips which are not having an extended id.
+ /*
+ * Check if chip is not a Samsung device. Do not clear the
+ * options for chips which do not have an extended id.
*/
if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
ident_done:
/*
- * Set chip as a default. Board drivers can override it, if necessary
+ * Set chip as a default. Board drivers can override it, if necessary.
*/
chip->options |= NAND_NO_AUTOINCR;
@@ -3077,21 +3094,21 @@ ident_done:
/*
* Check, if buswidth is correct. Hardware drivers should set
- * chip correct !
+ * chip correct!
*/
if (busw != (chip->options & NAND_BUSWIDTH_16)) {
- printk(KERN_INFO "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
- *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
- printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
- (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
- busw ? 16 : 8);
+ pr_info("NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+ *dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+ pr_warn("NAND bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
return ERR_PTR(-EINVAL);
}
/* Calculate the address shift from the page size */
chip->page_shift = ffs(mtd->writesize) - 1;
- /* Convert chipsize to number of pages per chip -1. */
+ /* Convert chipsize to number of pages per chip -1 */
chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
chip->bbt_erase_shift = chip->phys_erase_shift =
@@ -3121,7 +3138,7 @@ ident_done:
if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX))
- chip->options |= NAND_BBT_SCANLASTPAGE;
+ chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
(*maf_id == NAND_MFR_SAMSUNG ||
*maf_id == NAND_MFR_HYNIX ||
@@ -3129,17 +3146,7 @@ ident_done:
*maf_id == NAND_MFR_AMD)) ||
(mtd->writesize == 2048 &&
*maf_id == NAND_MFR_MICRON))
- chip->options |= NAND_BBT_SCAN2NDPAGE;
-
- /*
- * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
- */
- if (!(busw & NAND_BUSWIDTH_16) &&
- *maf_id == NAND_MFR_STMICRO &&
- mtd->writesize == 2048) {
- chip->options |= NAND_BBT_SCANBYTE1AND6;
- chip->badblockpos = 0;
- }
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
@@ -3147,12 +3154,11 @@ ident_done:
else
chip->erase_cmd = single_erase_cmd;
- /* Do not replace user supplied command function ! */
+ /* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
chip->cmdfunc = nand_command_lp;
- /* TODO onfi flash name */
- printk(KERN_INFO "NAND device: Manufacturer ID:"
+ pr_info("NAND device: Manufacturer ID:"
" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
nand_manuf_ids[maf_idx].name,
chip->onfi_version ? chip->onfi_params.model : type->name);
@@ -3162,12 +3168,12 @@ ident_done:
/**
* nand_scan_ident - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- * @table: Alternative NAND ID table
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
*
- * This is the first phase of the normal nand_scan() function. It
- * reads the flash ID and sets up MTD fields accordingly.
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
*
* The mtd->owner field must be set to the module of the caller.
*/
@@ -3189,7 +3195,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
- printk(KERN_WARNING "No NAND device found.\n");
+ pr_warn("No NAND device found\n");
chip->select_chip(mtd, -1);
return PTR_ERR(type);
}
@@ -3207,7 +3213,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
break;
}
if (i > 1)
- printk(KERN_INFO "%d NAND chips detected\n", i);
+ pr_info("%d NAND chips detected\n", i);
/* Store the number of chips and calc total size for mtd */
chip->numchips = i;
@@ -3220,11 +3226,11 @@ EXPORT_SYMBOL(nand_scan_ident);
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
+ * @mtd: MTD device structure
*
- * This is the second phase of the normal nand_scan() function. It
- * fills out all the uninitialized function pointers with the defaults
- * and scans for a bad block table if appropriate.
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
*/
int nand_scan_tail(struct mtd_info *mtd)
{
@@ -3240,7 +3246,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
- * If no default placement scheme is given, select an appropriate one
+ * If no default placement scheme is given, select an appropriate one.
*/
if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
switch (mtd->oobsize) {
@@ -3257,8 +3263,8 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.layout = &nand_oob_128;
break;
default:
- printk(KERN_WARNING "No oob scheme defined for "
- "oobsize %d\n", mtd->oobsize);
+ pr_warn("No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
BUG();
}
}
@@ -3267,7 +3273,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->write_page = nand_write_page;
/*
- * check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * Check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
@@ -3276,15 +3282,15 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!chip->ecc.calculate || !chip->ecc.correct ||
!chip->ecc.hwctl) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc_oob_first;
case NAND_ECC_HW:
- /* Use standard hwecc read page function ? */
+ /* Use standard hwecc read page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc;
if (!chip->ecc.write_page)
@@ -3305,11 +3311,11 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page == nand_read_page_hwecc ||
!chip->ecc.write_page ||
chip->ecc.write_page == nand_write_page_hwecc)) {
- printk(KERN_WARNING "No ECC functions supplied; "
- "Hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; "
+ "hardware ECC not possible\n");
BUG();
}
- /* Use standard syndrome read/write page function ? */
+ /* Use standard syndrome read/write page function? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_syndrome;
if (!chip->ecc.write_page)
@@ -3325,9 +3331,9 @@ int nand_scan_tail(struct mtd_info *mtd)
if (mtd->writesize >= chip->ecc.size)
break;
- printk(KERN_WARNING "%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- chip->ecc.size, mtd->writesize);
+ pr_warn("%d byte HW ECC not possible on "
+ "%d byte page size, fallback to SW ECC\n",
+ chip->ecc.size, mtd->writesize);
chip->ecc.mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
@@ -3347,7 +3353,7 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
- printk(KERN_WARNING "CONFIG_MTD_ECC_BCH not enabled\n");
+ pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
BUG();
}
chip->ecc.calculate = nand_bch_calculate_ecc;
@@ -3362,8 +3368,8 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
- * for details.
- * Otherwise, default to 4 bits for large page devices
+ * for details. Otherwise, default to 4 bits for large page
+ * devices.
*/
if (!chip->ecc.size && (mtd->oobsize >= 64)) {
chip->ecc.size = 512;
@@ -3374,14 +3380,14 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.bytes,
&chip->ecc.layout);
if (!chip->ecc.priv) {
- printk(KERN_WARNING "BCH ECC initialization failed!\n");
+ pr_warn("BCH ECC initialization failed!\n");
BUG();
}
break;
case NAND_ECC_NONE:
- printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
- "This is not recommended !!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. "
+ "This is not recommended!\n");
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
@@ -3393,14 +3399,19 @@ int nand_scan_tail(struct mtd_info *mtd)
break;
default:
- printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
- chip->ecc.mode);
+ pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
BUG();
}
+ /* For many systems, the standard OOB write also works for raw */
+ if (!chip->ecc.read_oob_raw)
+ chip->ecc.read_oob_raw = chip->ecc.read_oob;
+ if (!chip->ecc.write_oob_raw)
+ chip->ecc.write_oob_raw = chip->ecc.write_oob;
+
/*
* The number of bytes available for a client to place data into
- * the out of band area
+ * the out of band area.
*/
chip->ecc.layout->oobavail = 0;
for (i = 0; chip->ecc.layout->oobfree[i].length
@@ -3411,19 +3422,16 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* Set the number of read / write steps for one page depending on ECC
- * mode
+ * mode.
*/
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
- printk(KERN_WARNING "Invalid ecc parameters\n");
+ pr_warn("Invalid ECC parameters\n");
BUG();
}
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- /*
- * Allow subpage writes up to ecc.steps. Not possible for MLC
- * FLASH.
- */
+ /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
!(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
switch (chip->ecc.steps) {
@@ -3481,9 +3489,11 @@ int nand_scan_tail(struct mtd_info *mtd)
}
EXPORT_SYMBOL(nand_scan_tail);
-/* is_module_text_address() isn't exported, and it's mostly a pointless
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
* test if this is a module _anyway_ -- they'd have to try _really_ hard
- * to call us from in-kernel code if the core NAND support is modular. */
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
#ifdef MODULE
#define caller_is_module() (1)
#else
@@ -3493,15 +3503,13 @@ EXPORT_SYMBOL(nand_scan_tail);
/**
* nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
- *
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
*
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
*/
int nand_scan(struct mtd_info *mtd, int maxchips)
{
@@ -3509,8 +3517,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
/* Many callers got this wrong, so check for it for a while... */
if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
- __func__);
+ pr_crit("%s called with NULL mtd->owner!\n", __func__);
BUG();
}
@@ -3523,8 +3530,8 @@ EXPORT_SYMBOL(nand_scan);
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
-*/
+ * @mtd: MTD device structure
+ */
void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 4165857752c..69148ae3bf5 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -14,7 +14,7 @@
*
* When nand_scan_bbt is called, then it tries to find the bad block table
* depending on the options in the BBT descriptor(s). If no flash based BBT
- * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
* marked good / bad blocks. This information is used to create a memory BBT.
* Once a new bad block is discovered then the "factory" information is updated
* on the device.
@@ -36,9 +36,9 @@
* The table is marked in the OOB area with an ident pattern and a version
* number which indicates which of both tables is more up to date. If the NAND
* controller needs the complete OOB area for the ECC information then the
- * option NAND_USE_FLASH_BBT_NO_OOB should be used: it moves the ident pattern
- * and the version byte into the data area and the OOB area will remain
- * untouched.
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
*
* The table uses 2 bits per block
* 11b: block is good
@@ -81,17 +81,15 @@ static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @len: the length of buffer to search
- * @paglen: the pagelength
- * @td: search pattern descriptor
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
*
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers.
- * If the SCAN_EMPTY option is set then check, if all bytes except the
- * pattern area contain 0xff
- *
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
+ * all bytes except the pattern area contain 0xff.
+ */
static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
int i, end = 0;
@@ -110,32 +108,8 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
p += end;
/* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
-
- /* Check both positions 1 and 6 for pattern? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- if (td->options & NAND_BBT_SCANEMPTY) {
- p += td->len;
- end += NAND_SMALL_BADBLOCK_POS - td->offs;
- /* Check region between positions 1 and 6 */
- for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
- i++) {
- if (*p++ != 0xff)
- return -1;
- }
- }
- else {
- p += NAND_SMALL_BADBLOCK_POS - td->offs;
- }
- /* Compare the pattern */
- for (i = 0; i < td->len; i++) {
- if (p[i] != td->pattern[i])
- return -1;
- }
- }
+ if (memcmp(p, td->pattern, td->len))
+ return -1;
if (td->options & NAND_BBT_SCANEMPTY) {
p += td->len;
@@ -150,14 +124,13 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @td: search pattern descriptor
- *
- * Check for a pattern at the given place. Used to search bad block
- * tables and good / bad block identifiers. Same as check_pattern, but
- * no optional empty check
+ * @buf: the buffer to search
+ * @td: search pattern descriptor
*
-*/
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
{
int i;
@@ -168,21 +141,14 @@ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
if (p[td->offs + i] != td->pattern[i])
return -1;
}
- /* Need to check location 1 AND 6? */
- if (td->options & NAND_BBT_SCANBYTE1AND6) {
- for (i = 0; i < td->len; i++) {
- if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
- return -1;
- }
- }
return 0;
}
/**
* add_marker_len - compute the length of the marker in data area
- * @td: BBT descriptor used for computation
+ * @td: BBT descriptor used for computation
*
- * The length will be 0 if the markeris located in OOB area.
+ * The length will be 0 if the marker is located in OOB area.
*/
static u32 add_marker_len(struct nand_bbt_descr *td)
{
@@ -199,34 +165,33 @@ static u32 add_marker_len(struct nand_bbt_descr *td)
/**
* read_bbt - [GENERIC] Read the bad block table starting from page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @page: the starting page
- * @num: the number of bbt descriptors to read
- * @td: the bbt describtion table
- * @offs: offset in the memory table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: offset in the memory table
*
* Read the bad block table starting from page.
- *
*/
static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
struct nand_bbt_descr *td, int offs)
{
- int res, i, j, act = 0;
+ int res, ret = 0, i, j, act = 0;
struct nand_chip *this = mtd->priv;
size_t retlen, len, totlen;
loff_t from;
int bits = td->options & NAND_BBT_NRBITS_MSK;
- uint8_t msk = (uint8_t) ((1 << bits) - 1);
+ uint8_t msk = (uint8_t)((1 << bits) - 1);
u32 marker_len;
int reserved_block_code = td->reserved_block_code;
totlen = (num * bits) >> 3;
marker_len = add_marker_len(td);
- from = ((loff_t) page) << this->page_shift;
+ from = ((loff_t)page) << this->page_shift;
while (totlen) {
- len = min(totlen, (size_t) (1 << this->bbt_erase_shift));
+ len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
if (marker_len) {
/*
* In case the BBT marker is not in the OOB area it
@@ -238,11 +203,18 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
}
res = mtd->read(mtd, from, len, &retlen, buf);
if (res < 0) {
- if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error reading bad block table\n");
+ if (mtd_is_eccerr(res)) {
+ pr_info("nand_bbt: ECC error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ return res;
+ } else if (mtd_is_bitflip(res)) {
+ pr_info("nand_bbt: corrected error in BBT at "
+ "0x%012llx\n", from & ~mtd->writesize);
+ ret = res;
+ } else {
+ pr_info("nand_bbt: error reading BBT\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
}
/* Analyse data */
@@ -253,17 +225,19 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
if (tmp == msk)
continue;
if (reserved_block_code && (tmp == reserved_block_code)) {
- printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
mtd->ecc_stats.bbtblocks++;
continue;
}
- /* Leave it for now, if its matured we can move this
- * message to MTD_DEBUG_LEVEL0 */
- printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
- (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
- /* Factory marked bad or worn out ? */
+ /*
+ * Leave it for now, if it's matured we can
+ * move this message to pr_debug.
+ */
+ pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ /* Factory marked bad or worn out? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
else
@@ -274,20 +248,20 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
totlen -= len;
from += len;
}
- return 0;
+ return ret;
}
/**
* read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @chip: read the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ * NAND_BBT_PERCHIP option is set
*
- * Read the bad block table for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
-*/
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
{
struct nand_chip *this = mtd->priv;
@@ -313,9 +287,7 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
return 0;
}
-/*
- * BBT marker is in the first page, no OOB.
- */
+/* BBT marker is in the first page, no OOB */
static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
struct nand_bbt_descr *td)
{
@@ -329,35 +301,26 @@ static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
return mtd->read(mtd, offs, len, &retlen, buf);
}
-/*
- * Scan read raw data from flash
- */
+/* Scan read raw data from flash */
static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len)
{
struct mtd_oob_ops ops;
int res;
- ops.mode = MTD_OOB_RAW;
+ ops.mode = MTD_OPS_RAW;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
-
while (len > 0) {
- if (len <= mtd->writesize) {
- ops.oobbuf = buf + len;
- ops.datbuf = buf;
- ops.len = len;
- return mtd->read_oob(mtd, offs, &ops);
- } else {
- ops.oobbuf = buf + mtd->writesize;
- ops.datbuf = buf;
- ops.len = mtd->writesize;
- res = mtd->read_oob(mtd, offs, &ops);
+ ops.datbuf = buf;
+ ops.len = min(len, (size_t)mtd->writesize);
+ ops.oobbuf = buf + ops.len;
- if (res)
- return res;
- }
+ res = mtd->read_oob(mtd, offs, &ops);
+
+ if (res)
+ return res;
buf += mtd->oobsize + mtd->writesize;
len -= mtd->writesize;
@@ -374,15 +337,13 @@ static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
return scan_read_raw_oob(mtd, buf, offs, len);
}
-/*
- * Scan write data with oob to flash
- */
+/* Scan write data with oob to flash */
static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
uint8_t *buf, uint8_t *oob)
{
struct mtd_oob_ops ops;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.datbuf = buf;
@@ -403,15 +364,14 @@ static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
/**
* read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Read the bad block table(s) for all chips starting at a given page
- * We assume that the bbt bits are in consecutive order.
- *
-*/
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
@@ -422,8 +382,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
mtd->writesize, td);
td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- td->pages[0], td->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
}
/* Read the mirror version, if available */
@@ -431,15 +391,13 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
mtd->writesize, td);
md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
- printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
- md->pages[0], md->version[0]);
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
}
return 1;
}
-/*
- * Scan a given block full
- */
+/* Scan a given block full */
static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, size_t readlen,
int scanlen, int len)
@@ -447,7 +405,8 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
int ret, j;
ret = scan_read_raw_oob(mtd, buf, offs, readlen);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
for (j = 0; j < len; j++, buf += scanlen) {
@@ -457,9 +416,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
return 0;
}
-/*
- * Scan a given block partially
- */
+/* Scan a given block partially */
static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
loff_t offs, uint8_t *buf, int len)
{
@@ -470,16 +427,16 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
ops.oobbuf = buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
for (j = 0; j < len; j++) {
/*
- * Read the full oob until read_oob is fixed to
- * handle single byte reads for 16 bit
- * buswidth
+ * Read the full oob until read_oob is fixed to handle single
+ * byte reads for 16 bit buswidth.
*/
ret = mtd->read_oob(mtd, offs, &ops);
- if (ret)
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
return ret;
if (check_short_pattern(buf, bd))
@@ -492,14 +449,14 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
- * @chip: create the table for a specific chip, -1 read all chips.
- * Applies only if NAND_BBT_PERCHIP option is set
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ * if NAND_BBT_PERCHIP option is set
*
- * Create a bad block table by scanning the device
- * for the given good/bad block identify pattern
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
*/
static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *bd, int chip)
@@ -510,7 +467,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
loff_t from;
size_t readlen;
- printk(KERN_INFO "Scanning device for bad blocks\n");
+ pr_info("Scanning device for bad blocks\n");
if (bd->options & NAND_BBT_SCANALLPAGES)
len = 1 << (this->bbt_erase_shift - this->page_shift);
@@ -530,14 +487,16 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
}
if (chip == -1) {
- /* Note that numblocks is 2 * (real numblocks) here, see i+=2
- * below as it makes shifting and masking less painful */
+ /*
+ * Note that numblocks is 2 * (real numblocks) here, see i+=2
+ * below as it makes shifting and masking less painful
+ */
numblocks = mtd->size >> (this->bbt_erase_shift - 1);
startblock = 0;
from = 0;
} else {
if (chip >= this->numchips) {
- printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
+ pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
chip + 1, this->numchips);
return -EINVAL;
}
@@ -547,7 +506,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
- if (this->options & NAND_BBT_SCANLASTPAGE)
+ if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
from += mtd->erasesize - (mtd->writesize * len);
for (i = startblock; i < numblocks;) {
@@ -566,8 +525,8 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
if (ret) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
- printk(KERN_WARNING "Bad eraseblock %d at 0x%012llx\n",
- i >> 1, (unsigned long long)from);
+ pr_warn("Bad eraseblock %d at 0x%012llx\n",
+ i >> 1, (unsigned long long)from);
mtd->ecc_stats.badblocks++;
}
@@ -579,20 +538,18 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
/**
* search_bbt - [GENERIC] scan the device for a specific bad block table
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
*
- * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of
- * the device downwards. The search starts always at the start of a
- * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched
- * for a bbt, which contains the bad block information of this chip.
- * This is necessary to provide support for certain DOC devices.
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
*
- * The bbt ident pattern resides in the oob area of the first page
- * in a block.
+ * The bbt ident pattern resides in the oob area of the first page in a block.
*/
static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
{
@@ -603,7 +560,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
int bbtblocks;
int blocktopage = this->bbt_erase_shift - this->page_shift;
- /* Search direction top -> down ? */
+ /* Search direction top -> down? */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = (mtd->size >> this->bbt_erase_shift) - 1;
dir = -1;
@@ -612,7 +569,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
dir = 1;
}
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
bbtblocks = this->chipsize >> this->bbt_erase_shift;
@@ -651,23 +608,23 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
/* Check, if we found a bbt for each requested chip */
for (i = 0; i < chips; i++) {
if (td->pages[i] == -1)
- printk(KERN_WARNING "Bad block table not found for chip %d\n", i);
+ pr_warn("Bad block table not found for chip %d\n", i);
else
- printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i],
- td->version[i]);
+ pr_info("Bad block table found at page %d, version "
+ "0x%02X\n", td->pages[i], td->version[i]);
}
return 0;
}
/**
* search_read_bbts - [GENERIC] scan the device for bad block table(s)
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
*
- * Search and read the bad block table(s)
-*/
+ * Search and read the bad block table(s).
+ */
static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md)
{
/* Search the primary table */
@@ -683,16 +640,14 @@ static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt
/**
* write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
*
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @td: descriptor for the bad block table
- * @md: descriptor for the bad block table mirror
- * @chipsel: selector for a specific chip, -1 for all
- *
- * (Re)write the bad block table
- *
-*/
+ * (Re)write the bad block table.
+ */
static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
struct nand_bbt_descr *td, struct nand_bbt_descr *md,
int chipsel)
@@ -711,14 +666,14 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
ops.ooblen = mtd->oobsize;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
if (!rcode)
rcode = 0xff;
- /* Write bad block table per chip rather than per device ? */
+ /* Write bad block table per chip rather than per device? */
if (td->options & NAND_BBT_PERCHIP) {
numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
- /* Full device write or specific chip ? */
+ /* Full device write or specific chip? */
if (chipsel == -1) {
nrchips = this->numchips;
} else {
@@ -732,8 +687,8 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
/* Loop through the chips */
for (; chip < nrchips; chip++) {
-
- /* There was already a version of the table, reuse the page
+ /*
+ * There was already a version of the table, reuse the page
* This applies for absolute placement too, as we have the
* page nr. in td->pages.
*/
@@ -742,8 +697,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
goto write;
}
- /* Automatic placement of the bad block table */
- /* Search direction top -> down ? */
+ /*
+ * Automatic placement of the bad block table. Search direction
+ * top -> down?
+ */
if (td->options & NAND_BBT_LASTBLOCK) {
startblock = numblocks * (chip + 1) - 1;
dir = -1;
@@ -767,7 +724,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (!md || md->pages[chip] != page)
goto write;
}
- printk(KERN_ERR "No space left to write bad block table\n");
+ pr_err("No space left to write bad block table\n");
return -ENOSPC;
write:
@@ -792,24 +749,22 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
bbtoffs = chip * (numblocks >> 2);
- to = ((loff_t) page) << this->page_shift;
+ to = ((loff_t)page) << this->page_shift;
- /* Must we save the block contents ? */
+ /* Must we save the block contents? */
if (td->options & NAND_BBT_SAVECONTENT) {
/* Make it block aligned */
- to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
+ to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
len = 1 << this->bbt_erase_shift;
res = mtd->read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- printk(KERN_INFO "nand_bbt: Error "
- "reading block for writing "
- "the bad block table\n");
+ pr_info("nand_bbt: error reading block "
+ "for writing the bad block table\n");
return res;
}
- printk(KERN_WARNING "nand_bbt: ECC error "
- "while reading block for writing "
- "bad block table\n");
+ pr_warn("nand_bbt: ECC error while reading "
+ "block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -822,19 +777,19 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
pageoffs = page - (int)(to >> this->page_shift);
offs = pageoffs << this->page_shift;
/* Preset the bbt area with 0xff */
- memset(&buf[offs], 0xff, (size_t) (numblocks >> sft));
+ memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
ooboffs = len + (pageoffs * mtd->oobsize);
} else if (td->options & NAND_BBT_NO_OOB) {
ooboffs = 0;
offs = td->len;
- /* the version byte */
+ /* The version byte */
if (td->options & NAND_BBT_VERSION)
offs++;
/* Calc length */
- len = (size_t) (numblocks >> sft);
+ len = (size_t)(numblocks >> sft);
len += offs;
- /* Make it page aligned ! */
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len);
@@ -842,8 +797,8 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
memcpy(buf, td->pattern, td->len);
} else {
/* Calc length */
- len = (size_t) (numblocks >> sft);
- /* Make it page aligned ! */
+ len = (size_t)(numblocks >> sft);
+ /* Make it page aligned! */
len = ALIGN(len, mtd->writesize);
/* Preset the buffer with 0xff */
memset(buf, 0xff, len +
@@ -857,13 +812,13 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (td->options & NAND_BBT_VERSION)
buf[ooboffs + td->veroffs] = td->version[chip];
- /* walk through the memory table */
+ /* Walk through the memory table */
for (i = 0; i < numblocks;) {
uint8_t dat;
dat = this->bbt[bbtoffs + (i >> 2)];
for (j = 0; j < 4; j++, i++) {
int sftcnt = (i << (3 - sft)) & sftmsk;
- /* Do not store the reserved bbt blocks ! */
+ /* Do not store the reserved bbt blocks! */
buf[offs + (i >> sft)] &=
~(msk[dat & 0x03] << sftcnt);
dat >>= 2;
@@ -884,8 +839,8 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (res < 0)
goto outerr;
- printk(KERN_DEBUG "Bad block table written to 0x%012llx, version "
- "0x%02X\n", (unsigned long long)to, td->version[chip]);
+ pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+ (unsigned long long)to, td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
@@ -893,19 +848,18 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
return 0;
outerr:
- printk(KERN_WARNING
- "nand_bbt: Error while writing bad block table %d\n", res);
+ pr_warn("nand_bbt: error while writing bad block table %d\n", res);
return res;
}
/**
* nand_memory_bbt - [GENERIC] create a memory based bad block table
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function creates a memory based bbt by scanning the device
- * for manufacturer / software marked good / bad blocks
-*/
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
@@ -916,25 +870,24 @@ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *b
/**
* check_create - [GENERIC] create and write bbt(s) if necessary
- * @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
*
- * The function checks the results of the previous call to read_bbt
- * and creates / updates the bbt(s) if necessary
- * Creation is necessary if no bbt was found for the chip/device
- * Update is necessary if one of the tables is missing or the
- * version nr. of one table is less than the other
-*/
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
{
- int i, chips, writeops, chipsel, res;
+ int i, chips, writeops, create, chipsel, res, res2;
struct nand_chip *this = mtd->priv;
struct nand_bbt_descr *td = this->bbt_td;
struct nand_bbt_descr *md = this->bbt_md;
struct nand_bbt_descr *rd, *rd2;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP)
chips = this->numchips;
else
@@ -942,86 +895,98 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
for (i = 0; i < chips; i++) {
writeops = 0;
+ create = 0;
rd = NULL;
rd2 = NULL;
- /* Per chip or per device ? */
+ res = res2 = 0;
+ /* Per chip or per device? */
chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
- /* Mirrored table available ? */
+ /* Mirrored table available? */
if (md) {
if (td->pages[i] == -1 && md->pages[i] == -1) {
+ create = 1;
writeops = 0x03;
- goto create;
- }
-
- if (td->pages[i] == -1) {
+ } else if (td->pages[i] == -1) {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
- goto writecheck;
- }
-
- if (md->pages[i] == -1) {
+ writeops = 0x01;
+ } else if (md->pages[i] == -1) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
- goto writecheck;
- }
-
- if (td->version[i] == md->version[i]) {
+ writeops = 0x02;
+ } else if (td->version[i] == md->version[i]) {
rd = td;
if (!(td->options & NAND_BBT_VERSION))
rd2 = md;
- goto writecheck;
- }
-
- if (((int8_t) (td->version[i] - md->version[i])) > 0) {
+ } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
rd = td;
- md->version[i] = td->version[i];
- writeops = 2;
+ writeops = 0x02;
} else {
rd = md;
- td->version[i] = md->version[i];
- writeops = 1;
+ writeops = 0x01;
}
-
- goto writecheck;
-
} else {
if (td->pages[i] == -1) {
+ create = 1;
writeops = 0x01;
- goto create;
+ } else {
+ rd = td;
}
- rd = td;
- goto writecheck;
}
- create:
- /* Create the bad block table by scanning the device ? */
- if (!(td->options & NAND_BBT_CREATE))
- continue;
- /* Create the table in memory by scanning the chip(s) */
- if (!(this->options & NAND_CREATE_EMPTY_BBT))
- create_bbt(mtd, buf, bd, chipsel);
-
- td->version[i] = 1;
- if (md)
- md->version[i] = 1;
- writecheck:
- /* read back first ? */
- if (rd)
- read_abs_bbt(mtd, buf, rd, chipsel);
- /* If they weren't versioned, read both. */
- if (rd2)
- read_abs_bbt(mtd, buf, rd2, chipsel);
-
- /* Write the bad block table to the device ? */
+ if (create) {
+ /* Create the bad block table by scanning the device? */
+ if (!(td->options & NAND_BBT_CREATE))
+ continue;
+
+ /* Create the table in memory by scanning the chip(s) */
+ if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+ create_bbt(mtd, buf, bd, chipsel);
+
+ td->version[i] = 1;
+ if (md)
+ md->version[i] = 1;
+ }
+
+ /* Read back first? */
+ if (rd) {
+ res = read_abs_bbt(mtd, buf, rd, chipsel);
+ if (mtd_is_eccerr(res)) {
+ /* Mark table as invalid */
+ rd->pages[i] = -1;
+ rd->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+ /* If they weren't versioned, read both */
+ if (rd2) {
+ res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+ if (mtd_is_eccerr(res2)) {
+ /* Mark table as invalid */
+ rd2->pages[i] = -1;
+ rd2->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+
+ /* Scrub the flash table(s)? */
+ if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+ writeops = 0x03;
+
+ /* Update version numbers before writing */
+ if (md) {
+ td->version[i] = max(td->version[i], md->version[i]);
+ md->version[i] = td->version[i];
+ }
+
+ /* Write the bad block table to the device? */
if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
return res;
}
- /* Write the mirror bad block table to the device ? */
+ /* Write the mirror bad block table to the device? */
if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
if (res < 0)
@@ -1033,20 +998,19 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
/**
* mark_bbt_regions - [GENERIC] mark the bad block table regions
- * @mtd: MTD device structure
- * @td: bad block table descriptor
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
*
- * The bad block table regions are marked as "bad" to prevent
- * accidental erasures / writes. The regions are identified by
- * the mark 0x02.
-*/
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
{
struct nand_chip *this = mtd->priv;
int i, j, chips, block, nrblocks, update;
uint8_t oldval, newval;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chips = this->numchips;
nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
@@ -1083,9 +1047,11 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
update = 1;
block += 2;
}
- /* If we want reserved blocks to be recorded to flash, and some
- new ones have been marked, then we need to update the stored
- bbts. This should only happen once. */
+ /*
+ * If we want reserved blocks to be recorded to flash, and some
+ * new ones have been marked, then we need to update the stored
+ * bbts. This should only happen once.
+ */
if (update && td->reserved_block_code)
nand_update_bbt(mtd, (loff_t)(block - 2) << (this->bbt_erase_shift - 1));
}
@@ -1093,8 +1059,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
/**
* verify_bbt_descr - verify the bad block description
- * @mtd: MTD device structure
- * @bd: the table to verify
+ * @mtd: MTD device structure
+ * @bd: the table to verify
*
* This functions performs a few sanity checks on the bad block description
* table.
@@ -1112,16 +1078,16 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
pattern_len = bd->len;
bits = bd->options & NAND_BBT_NRBITS_MSK;
- BUG_ON((this->options & NAND_USE_FLASH_BBT_NO_OOB) &&
- !(this->options & NAND_USE_FLASH_BBT));
+ BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+ !(this->bbt_options & NAND_BBT_USE_FLASH));
BUG_ON(!bits);
if (bd->options & NAND_BBT_VERSION)
pattern_len++;
if (bd->options & NAND_BBT_NO_OOB) {
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT));
- BUG_ON(!(this->options & NAND_USE_FLASH_BBT_NO_OOB));
+ BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+ BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
BUG_ON(bd->offs);
if (bd->options & NAND_BBT_VERSION)
BUG_ON(bd->veroffs != bd->len);
@@ -1141,18 +1107,16 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
/**
* nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
- * @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
- *
- * The function checks, if a bad block table(s) is/are already
- * available. If not it scans the device for manufacturer
- * marked good / bad blocks and writes the bad block table(s) to
- * the selected place.
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
*
- * The bad block table memory is allocated here. It must be freed
- * by calling the nand_free_bbt function.
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
*
-*/
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct nand_chip *this = mtd->priv;
@@ -1162,19 +1126,21 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
struct nand_bbt_descr *md = this->bbt_md;
len = mtd->size >> (this->bbt_erase_shift + 2);
- /* Allocate memory (2bit per block) and clear the memory bad block table */
+ /*
+ * Allocate memory (2bit per block) and clear the memory bad block
+ * table.
+ */
this->bbt = kzalloc(len, GFP_KERNEL);
- if (!this->bbt) {
- printk(KERN_ERR "nand_scan_bbt: Out of memory\n");
+ if (!this->bbt)
return -ENOMEM;
- }
- /* If no primary table decriptor is given, scan the device
- * to build a memory based bad block table
+ /*
+ * If no primary table decriptor is given, scan the device to build a
+ * memory based bad block table.
*/
if (!td) {
if ((res = nand_memory_bbt(mtd, bd))) {
- printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n");
+ pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
kfree(this->bbt);
this->bbt = NULL;
}
@@ -1188,13 +1154,12 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
len += (len >> this->page_shift) * mtd->oobsize;
buf = vmalloc(len);
if (!buf) {
- printk(KERN_ERR "nand_bbt: Out of memory\n");
kfree(this->bbt);
this->bbt = NULL;
return -ENOMEM;
}
- /* Is the bbt at a given page ? */
+ /* Is the bbt at a given page? */
if (td->options & NAND_BBT_ABSPAGE) {
res = read_abs_bbts(mtd, buf, td, md);
} else {
@@ -1216,15 +1181,15 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
/**
* nand_update_bbt - [NAND Interface] update bad block table(s)
- * @mtd: MTD device structure
- * @offs: the offset of the newly marked block
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
*
- * The function updates the bad block table(s)
-*/
+ * The function updates the bad block table(s).
+ */
int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
{
struct nand_chip *this = mtd->priv;
- int len, res = 0, writeops = 0;
+ int len, res = 0;
int chip, chipsel;
uint8_t *buf;
struct nand_bbt_descr *td = this->bbt_td;
@@ -1237,14 +1202,10 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
buf = kmalloc(len, GFP_KERNEL);
- if (!buf) {
- printk(KERN_ERR "nand_update_bbt: Out of memory\n");
+ if (!buf)
return -ENOMEM;
- }
-
- writeops = md != NULL ? 0x03 : 0x01;
- /* Do we have a bbt per chip ? */
+ /* Do we have a bbt per chip? */
if (td->options & NAND_BBT_PERCHIP) {
chip = (int)(offs >> this->chip_shift);
chipsel = chip;
@@ -1257,14 +1218,14 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
if (md)
md->version[chip]++;
- /* Write the bad block table to the device ? */
- if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+ /* Write the bad block table to the device? */
+ if (td->options & NAND_BBT_WRITE) {
res = write_bbt(mtd, buf, td, md, chipsel);
if (res < 0)
goto out;
}
- /* Write the mirror bad block table to the device ? */
- if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+ /* Write the mirror bad block table to the device? */
+ if (md && (md->options & NAND_BBT_WRITE)) {
res = write_bbt(mtd, buf, md, td, chipsel);
}
@@ -1273,8 +1234,10 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
return res;
}
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
@@ -1286,8 +1249,7 @@ static struct nand_bbt_descr agand_flashbased = {
.pattern = scan_agand_pattern
};
-/* Generic flash bbt decriptors
-*/
+/* Generic flash bbt descriptors */
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
@@ -1331,31 +1293,27 @@ static struct nand_bbt_descr bbt_mirror_no_bbt_descr = {
.pattern = mirror_pattern
};
-#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
- NAND_BBT_SCANBYTE1AND6)
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
/**
- * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
- * @this: NAND chip to create descriptor for
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
*
* This function allocates and initializes a nand_bbt_descr for BBM detection
- * based on the properties of "this". The new descriptor is stored in
+ * based on the properties of @this. The new descriptor is stored in
* this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
* passed to this function.
- *
*/
-static int nand_create_default_bbt_descr(struct nand_chip *this)
+static int nand_create_badblock_pattern(struct nand_chip *this)
{
struct nand_bbt_descr *bd;
if (this->badblock_pattern) {
- printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+ pr_warn("Bad block pattern already allocated; not replacing\n");
return -EINVAL;
}
bd = kzalloc(sizeof(*bd), GFP_KERNEL);
- if (!bd) {
- printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+ if (!bd)
return -ENOMEM;
- }
- bd->options = this->options & BBT_SCAN_OPTIONS;
+ bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
bd->offs = this->badblockpos;
bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
bd->pattern = scan_ff_pattern;
@@ -1366,22 +1324,20 @@ static int nand_create_default_bbt_descr(struct nand_chip *this)
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
- * @mtd: MTD device structure
- *
- * This function selects the default bad block table
- * support for the device and calls the nand_scan_bbt function
+ * @mtd: MTD device structure
*
-*/
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
- /* Default for AG-AND. We must use a flash based
- * bad block table as the devices have factory marked
- * _good_ blocks. Erasing those blocks leads to loss
- * of the good / bad information, so we _must_ store
- * this information in a good / bad table during
- * startup
+ /*
+ * Default for AG-AND. We must use a flash based bad block table as the
+ * devices have factory marked _good_ blocks. Erasing those blocks
+ * leads to loss of the good / bad information, so we _must_ store this
+ * information in a good / bad table during startup.
*/
if (this->options & NAND_IS_AND) {
/* Use the default pattern descriptors */
@@ -1389,15 +1345,15 @@ int nand_default_bbt(struct mtd_info *mtd)
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
- this->options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
return nand_scan_bbt(mtd, &agand_flashbased);
}
- /* Is a flash based bad block table requested ? */
- if (this->options & NAND_USE_FLASH_BBT) {
+ /* Is a flash based bad block table requested? */
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
- if (this->options & NAND_USE_FLASH_BBT_NO_OOB) {
+ if (this->bbt_options & NAND_BBT_NO_OOB) {
this->bbt_td = &bbt_main_no_bbt_descr;
this->bbt_md = &bbt_mirror_no_bbt_descr;
} else {
@@ -1411,18 +1367,17 @@ int nand_default_bbt(struct mtd_info *mtd)
}
if (!this->badblock_pattern)
- nand_create_default_bbt_descr(this);
+ nand_create_badblock_pattern(this);
return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
* nand_isbad_bbt - [NAND Interface] Check if a block is bad
- * @mtd: MTD device structure
- * @offs: offset in the device
- * @allowbbt: allow access to bad block table region
- *
-*/
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
{
struct nand_chip *this = mtd->priv;
@@ -1433,8 +1388,9 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
block = (int)(offs >> (this->bbt_erase_shift - 1));
res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
- DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
- (unsigned int)offs, block >> 1, res);
+ pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
+ "(block %d) 0x%02x\n",
+ (unsigned int)offs, block >> 1, res);
switch ((int)res) {
case 0x00:
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index 0f931e75711..3803e0bba23 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -93,8 +93,8 @@ int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
/* else error in ecc, no action needed */
- DEBUG(MTD_DEBUG_LEVEL0, "%s: corrected bitflip %u\n",
- __func__, errloc[i]);
+ pr_debug("%s: corrected bitflip %u\n", __func__,
+ errloc[i]);
}
} else if (count < 0) {
printk(KERN_ERR "ecc unrecoverable error\n");
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 271b8e735e8..b7cfe0d3712 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -110,7 +110,7 @@ static const char bitsperbyte[256] = {
/*
* addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
+ * ECC data that identify the faulty location.
* this is only used for repairing parity
* see the comments in nand_correct_data for more details
*/
@@ -153,7 +153,7 @@ static const char addressbits[256] = {
* __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
* block
* @buf: input buffer with raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
* @code: output buffer with ECC
*/
void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
@@ -348,7 +348,7 @@ void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
rp17 = (par ^ rp16) & 0xff;
/*
- * Finally calculate the ecc bits.
+ * Finally calculate the ECC bits.
* Again here it might seem that there are performance optimisations
* possible, but benchmarks showed that on the system this is developed
* the code below is the fastest
@@ -436,7 +436,7 @@ EXPORT_SYMBOL(nand_calculate_ecc);
* @buf: raw data read from the chip
* @read_ecc: ECC from the chip
* @calc_ecc: the ECC calculated from raw data
- * @eccsize: data bytes per ecc step (256 or 512)
+ * @eccsize: data bytes per ECC step (256 or 512)
*
* Detect and correct a 1 bit error for eccsize byte block
*/
@@ -505,7 +505,7 @@ int __nand_correct_data(unsigned char *buf,
}
/* count nr of bits; use table lookup, faster than calculating it */
if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
+ return 1; /* error in ECC data; no action needed */
printk(KERN_ERR "uncorrectable error : ");
return -1;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 357e8c5252a..34c03be7730 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2273,9 +2273,9 @@ static int __init ns_init_module(void)
switch (bbt) {
case 2:
- chip->options |= NAND_USE_FLASH_BBT_NO_OOB;
+ chip->bbt_options |= NAND_BBT_NO_OOB;
case 1:
- chip->options |= NAND_USE_FLASH_BBT;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
case 0:
break;
default:
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index ea2dea8a9c8..ee1713907b9 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -42,7 +42,6 @@ struct ndfc_controller {
struct nand_chip chip;
int chip_select;
struct nand_hw_control ndfc_control;
- struct mtd_partition *parts;
};
static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS];
@@ -159,13 +158,9 @@ static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
static int ndfc_chip_init(struct ndfc_controller *ndfc,
struct device_node *node)
{
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- static const char *part_types[] = { "cmdlinepart", NULL };
-#else
- static const char *part_types[] = { NULL };
-#endif
struct device_node *flash_np;
struct nand_chip *chip = &ndfc->chip;
+ struct mtd_part_parser_data ppdata;
int ret;
chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
@@ -193,6 +188,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
if (!flash_np)
return -ENODEV;
+ ppdata->of_node = flash_np;
ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
dev_name(&ndfc->ofdev->dev), flash_np->name);
if (!ndfc->mtd.name) {
@@ -204,18 +200,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
if (ret)
goto err;
- ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0);
- if (ret < 0)
- goto err;
-
- if (ret == 0) {
- ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np,
- &ndfc->parts);
- if (ret < 0)
- goto err;
- }
-
- ret = mtd_device_register(&ndfc->mtd, ndfc->parts, ret);
+ ret = mtd_device_parse_register(&ndfc->mtd, NULL, &ppdata, NULL, 0);
err:
of_node_put(flash_np);
@@ -288,6 +273,7 @@ static int __devexit ndfc_remove(struct platform_device *ofdev)
struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
nand_release(&ndfc->mtd);
+ kfree(ndfc->mtd.name);
return 0;
}
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
index b6a5c86ab31..b463ecfb4c1 100644
--- a/drivers/mtd/nand/nomadik_nand.c
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -187,6 +187,7 @@ static int nomadik_nand_remove(struct platform_device *pdev)
pdata->exit();
if (host) {
+ nand_release(&host->mtd);
iounmap(host->cmd_va);
iounmap(host->data_va);
iounmap(host->addr_va);
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 9c30a0b0317..fa8faedfad6 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -339,6 +339,7 @@ static int __devexit nuc900_nand_remove(struct platform_device *pdev)
struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
struct resource *res;
+ nand_release(&nuc900_nand->mtd);
iounmap(nuc900_nand->reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ec22a5aab03..f745f00f316 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -95,8 +95,6 @@
#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
@@ -115,7 +113,6 @@ struct omap_nand_info {
struct nand_hw_control controller;
struct omap_nand_platform_data *pdata;
struct mtd_info mtd;
- struct mtd_partition *parts;
struct nand_chip nand;
struct platform_device *pdev;
@@ -745,12 +742,12 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
case 1:
/* Uncorrectable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+ pr_debug("ECC UNCORRECTED_ERROR 1\n");
return -1;
case 11:
/* UN-Correctable error */
- DEBUG(MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR B\n");
+ pr_debug("ECC UNCORRECTED_ERROR B\n");
return -1;
case 12:
@@ -767,8 +764,8 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
- DEBUG(MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at "
- "offset: %d, bit: %d\n", find_byte, find_bit);
+ pr_debug("Correcting single bit ECC error at offset: "
+ "%d, bit: %d\n", find_byte, find_bit);
page_data[find_byte] ^= (1 << find_bit);
@@ -780,7 +777,7 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
ecc_data2[2] == 0)
return 0;
}
- DEBUG(MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+ pr_debug("UNCORRECTED_ERROR default\n");
return -1;
}
}
@@ -1104,13 +1101,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
goto out_release_mem_region;
}
- err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
- if (err > 0)
- mtd_device_register(&info->mtd, info->parts, err);
- else if (pdata->parts)
- mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts);
- else
- mtd_device_register(&info->mtd, NULL, 0);
+ mtd_device_parse_register(&info->mtd, NULL, 0,
+ pdata->parts, pdata->nr_parts);
platform_set_drvdata(pdev, &info->mtd);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 7794d0680f9..29f505adaf8 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -21,8 +21,6 @@
#include <mach/hardware.h>
#include <plat/orion_nand.h>
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *nc = mtd->priv;
@@ -81,8 +79,6 @@ static int __init orion_nand_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *io_base;
int ret = 0;
- struct mtd_partition *partitions = NULL;
- int num_part = 0;
nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!nc) {
@@ -132,17 +128,9 @@ static int __init orion_nand_probe(struct platform_device *pdev)
goto no_dev;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd->name = "orion_nand";
- num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-#endif
- /* If cmdline partitions have been passed, let them be used */
- if (num_part <= 0) {
- num_part = board->nr_parts;
- partitions = board->parts;
- }
-
- ret = mtd_device_register(mtd, partitions, num_part);
+ ret = mtd_device_parse_register(mtd, NULL, 0,
+ board->parts, board->nr_parts);
if (ret) {
nand_release(mtd);
goto no_dev;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index b1aa41b8a4e..a97264ececd 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -155,7 +155,8 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
chip->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
+ chip->options = NAND_NO_AUTOINCR;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(pasemi_nand_mtd, 1)) {
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 633c04bf76f..ea8e1234e0e 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -21,8 +21,6 @@ struct plat_nand_data {
struct nand_chip chip;
struct mtd_info mtd;
void __iomem *io_base;
- int nr_parts;
- struct mtd_partition *parts;
};
/*
@@ -79,6 +77,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
data->chip.read_buf = pdata->ctrl.read_buf;
data->chip.chip_delay = pdata->chip.chip_delay;
data->chip.options |= pdata->chip.options;
+ data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
data->chip.ecc.layout = pdata->chip.ecclayout;
@@ -99,23 +98,9 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
goto out;
}
- if (pdata->chip.part_probe_types) {
- err = parse_mtd_partitions(&data->mtd,
- pdata->chip.part_probe_types,
- &data->parts, 0);
- if (err > 0) {
- mtd_device_register(&data->mtd, data->parts, err);
- return 0;
- }
- }
- if (pdata->chip.set_parts)
- pdata->chip.set_parts(data->mtd.size, &pdata->chip);
- if (pdata->chip.partitions) {
- data->parts = pdata->chip.partitions;
- err = mtd_device_register(&data->mtd, data->parts,
- pdata->chip.nr_partitions);
- } else
- err = mtd_device_register(&data->mtd, NULL, 0);
+ err = mtd_device_parse_register(&data->mtd,
+ pdata->chip.part_probe_types, 0,
+ pdata->chip.partitions, pdata->chip.nr_partitions);
if (!err)
return err;
@@ -145,8 +130,6 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
nand_release(&data->mtd);
- if (data->parts && data->parts != pdata->chip.partitions)
- kfree(data->parts);
if (pdata->ctrl.remove)
pdata->ctrl.remove(pdev);
iounmap(data->io_base);
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 3bbb796b451..7e52af51a19 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -99,8 +99,6 @@ static struct mtd_partition partition_info_evb[] = {
#define NUM_PARTITIONS 1
-extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id);
-
/*
* hardware specific access to control-lines
*/
@@ -187,18 +185,12 @@ static int ppchameleonevb_device_ready(struct mtd_info *minfo)
}
#endif
-const char *part_probes[] = { "cmdlinepart", NULL };
-const char *part_probes_evb[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __init ppchameleonevb_init(void)
{
struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
void __iomem *ppchameleon_fio_base;
void __iomem *ppchameleonevb_fio_base;
@@ -281,24 +273,13 @@ static int __init ppchameleonevb_init(void)
#endif
ppchameleon_mtd->name = "ppchameleon-nand";
- mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
- mtd_parts = partition_info_me;
- else
- mtd_parts = partition_info_hi;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleon_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
nand_evb_init:
/****************************
@@ -382,21 +363,13 @@ static int __init ppchameleonevb_init(void)
}
ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
- mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info_evb;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- mtd_device_register(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);
+ mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me :
+ partition_info_hi,
+ NUM_PARTITIONS);
/* Return happy */
return 0;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 1fb3b3a8058..9eb7f879969 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -110,6 +110,7 @@ enum {
enum {
STATE_IDLE = 0,
+ STATE_PREPARED,
STATE_CMD_HANDLE,
STATE_DMA_READING,
STATE_DMA_WRITING,
@@ -120,21 +121,40 @@ enum {
STATE_READY,
};
-struct pxa3xx_nand_info {
- struct nand_chip nand_chip;
+struct pxa3xx_nand_host {
+ struct nand_chip chip;
+ struct pxa3xx_nand_cmdset *cmdset;
+ struct mtd_info *mtd;
+ void *info_data;
+
+ /* page size of attached chip */
+ unsigned int page_size;
+ int use_ecc;
+ int cs;
+ /* calculated from pxa3xx_nand_flash data */
+ unsigned int col_addr_cycles;
+ unsigned int row_addr_cycles;
+ size_t read_id_bytes;
+
+ /* cached register value */
+ uint32_t reg_ndcr;
+ uint32_t ndtr0cs0;
+ uint32_t ndtr1cs0;
+};
+
+struct pxa3xx_nand_info {
struct nand_hw_control controller;
struct platform_device *pdev;
- struct pxa3xx_nand_cmdset *cmdset;
struct clk *clk;
void __iomem *mmio_base;
unsigned long mmio_phys;
+ struct completion cmd_complete;
unsigned int buf_start;
unsigned int buf_count;
- struct mtd_info *mtd;
/* DMA information */
int drcmr_dat;
int drcmr_cmd;
@@ -142,44 +162,27 @@ struct pxa3xx_nand_info {
unsigned char *data_buff;
unsigned char *oob_buff;
dma_addr_t data_buff_phys;
- size_t data_buff_size;
int data_dma_ch;
struct pxa_dma_desc *data_desc;
dma_addr_t data_desc_addr;
- uint32_t reg_ndcr;
-
- /* saved column/page_addr during CMD_SEQIN */
- int seqin_column;
- int seqin_page_addr;
-
- /* relate to the command */
+ struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
unsigned int state;
+ int cs;
int use_ecc; /* use HW ECC ? */
int use_dma; /* use DMA ? */
int is_ready;
unsigned int page_size; /* page size of attached chip */
unsigned int data_size; /* data size in FIFO */
+ unsigned int oob_size;
int retcode;
- struct completion cmd_complete;
/* generated NDCBx register values */
uint32_t ndcb0;
uint32_t ndcb1;
uint32_t ndcb2;
-
- /* timing calcuted from setting */
- uint32_t ndtr0cs0;
- uint32_t ndtr1cs0;
-
- /* calculated from pxa3xx_nand_flash data */
- size_t oob_size;
- size_t read_id_bytes;
-
- unsigned int col_addr_cycles;
- unsigned int row_addr_cycles;
};
static int use_dma = 1;
@@ -225,7 +228,7 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
-const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
+const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL};
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
@@ -241,9 +244,10 @@ const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
/* convert nano-seconds to nand flash controller clock cycles */
#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
-static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
const struct pxa3xx_nand_timing *t)
{
+ struct pxa3xx_nand_info *info = host->info_data;
unsigned long nand_clk = clk_get_rate(info->clk);
uint32_t ndtr0, ndtr1;
@@ -258,23 +262,24 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
- info->ndtr0cs0 = ndtr0;
- info->ndtr1cs0 = ndtr1;
+ host->ndtr0cs0 = ndtr0;
+ host->ndtr1cs0 = ndtr1;
nand_writel(info, NDTR0CS0, ndtr0);
nand_writel(info, NDTR1CS0, ndtr1);
}
static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
{
- int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ int oob_enable = host->reg_ndcr & NDCR_SPARE_EN;
- info->data_size = info->page_size;
+ info->data_size = host->page_size;
if (!oob_enable) {
info->oob_size = 0;
return;
}
- switch (info->page_size) {
+ switch (host->page_size) {
case 2048:
info->oob_size = (info->use_ecc) ? 40 : 64;
break;
@@ -292,9 +297,10 @@ static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info)
*/
static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr;
- ndcr = info->reg_ndcr;
+ ndcr = host->reg_ndcr;
ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
ndcr |= NDCR_ND_RUN;
@@ -359,7 +365,7 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
DIV_ROUND_UP(info->oob_size, 4));
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
@@ -385,7 +391,7 @@ static void start_data_dma(struct pxa3xx_nand_info *info)
desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
break;
default:
- printk(KERN_ERR "%s: invalid state %d\n", __func__,
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
info->state);
BUG();
}
@@ -416,6 +422,15 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
{
struct pxa3xx_nand_info *info = devid;
unsigned int status, is_completed = 0;
+ unsigned int ready, cmd_done;
+
+ if (info->cs == 0) {
+ ready = NDSR_FLASH_RDY;
+ cmd_done = NDSR_CS0_CMDD;
+ } else {
+ ready = NDSR_RDY;
+ cmd_done = NDSR_CS1_CMDD;
+ }
status = nand_readl(info, NDSR);
@@ -437,11 +452,11 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
handle_data_pio(info);
}
}
- if (status & NDSR_CS0_CMDD) {
+ if (status & cmd_done) {
info->state = STATE_CMD_DONE;
is_completed = 1;
}
- if (status & NDSR_FLASH_RDY) {
+ if (status & ready) {
info->is_ready = 1;
info->state = STATE_READY;
}
@@ -463,12 +478,6 @@ NORMAL_IRQ_EXIT:
return IRQ_HANDLED;
}
-static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
-{
- struct pxa3xx_nand_info *info = mtd->priv;
- return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
-}
-
static inline int is_buf_blank(uint8_t *buf, size_t len)
{
for (; len > 0; len--)
@@ -481,10 +490,12 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
uint16_t column, int page_addr)
{
uint16_t cmd;
- int addr_cycle, exec_cmd, ndcb0;
- struct mtd_info *mtd = info->mtd;
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+ struct mtd_info *mtd;
- ndcb0 = 0;
+ host = info->host[info->cs];
+ mtd = host->mtd;
addr_cycle = 0;
exec_cmd = 1;
@@ -495,6 +506,10 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
info->use_ecc = 0;
info->is_ready = 0;
info->retcode = ERR_NONE;
+ if (info->cs != 0)
+ info->ndcb0 = NDCB0_CSEL;
+ else
+ info->ndcb0 = 0;
switch (command) {
case NAND_CMD_READ0:
@@ -512,20 +527,19 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
}
- info->ndcb0 = ndcb0;
- addr_cycle = NDCB0_ADDR_CYC(info->row_addr_cycles
- + info->col_addr_cycles);
+ addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+ + host->col_addr_cycles);
switch (command) {
case NAND_CMD_READOOB:
case NAND_CMD_READ0:
- cmd = info->cmdset->read1;
+ cmd = host->cmdset->read1;
if (command == NAND_CMD_READOOB)
info->buf_start = mtd->writesize + column;
else
info->buf_start = column;
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE))
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE))
info->ndcb0 |= NDCB0_CMD_TYPE(0)
| addr_cycle
| (cmd & NDCB0_CMD1_MASK);
@@ -537,7 +551,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
case NAND_CMD_SEQIN:
/* small page addr setting */
- if (unlikely(info->page_size < PAGE_CHUNK_SIZE)) {
+ if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) {
info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
| (column & 0xFF);
@@ -564,7 +578,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
}
- cmd = info->cmdset->program;
+ cmd = host->cmdset->program;
info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
| NDCB0_AUTO_RS
| NDCB0_ST_ROW_EN
@@ -574,8 +588,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
case NAND_CMD_READID:
- cmd = info->cmdset->read_id;
- info->buf_count = info->read_id_bytes;
+ cmd = host->cmdset->read_id;
+ info->buf_count = host->read_id_bytes;
info->ndcb0 |= NDCB0_CMD_TYPE(3)
| NDCB0_ADDR_CYC(1)
| cmd;
@@ -583,7 +597,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
info->data_size = 8;
break;
case NAND_CMD_STATUS:
- cmd = info->cmdset->read_status;
+ cmd = host->cmdset->read_status;
info->buf_count = 1;
info->ndcb0 |= NDCB0_CMD_TYPE(4)
| NDCB0_ADDR_CYC(1)
@@ -593,7 +607,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
case NAND_CMD_ERASE1:
- cmd = info->cmdset->erase;
+ cmd = host->cmdset->erase;
info->ndcb0 |= NDCB0_CMD_TYPE(2)
| NDCB0_AUTO_RS
| NDCB0_ADDR_CYC(3)
@@ -604,7 +618,7 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
break;
case NAND_CMD_RESET:
- cmd = info->cmdset->reset;
+ cmd = host->cmdset->reset;
info->ndcb0 |= NDCB0_CMD_TYPE(5)
| cmd;
@@ -616,8 +630,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
default:
exec_cmd = 0;
- printk(KERN_ERR "pxa3xx-nand: non-supported"
- " command %x\n", command);
+ dev_err(&info->pdev->dev, "non-supported command %x\n",
+ command);
break;
}
@@ -627,7 +641,8 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int ret, exec_cmd;
/*
@@ -635,9 +650,21 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
* "byte" address into a "word" address appropriate
* for indexing a word-oriented device
*/
- if (info->reg_ndcr & NDCR_DWIDTH_M)
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
column /= 2;
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, host->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, host->ndtr1cs0);
+ }
+
+ info->state = STATE_PREPARED;
exec_cmd = prepare_command_pool(info, command, column, page_addr);
if (exec_cmd) {
init_completion(&info->cmd_complete);
@@ -646,12 +673,12 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
ret = wait_for_completion_timeout(&info->cmd_complete,
CHIP_DELAY_TIMEOUT);
if (!ret) {
- printk(KERN_ERR "Wait time out!!!\n");
+ dev_err(&info->pdev->dev, "Wait time out!!!\n");
/* Stop State Machine for next command cycle */
pxa3xx_nand_stop(info);
}
- info->state = STATE_IDLE;
}
+ info->state = STATE_IDLE;
}
static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
@@ -664,7 +691,8 @@ static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int page)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -685,6 +713,8 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
* OOB, ignore such double bit errors
*/
if (is_buf_blank(buf, mtd->writesize))
+ info->retcode = ERR_NONE;
+ else
mtd->ecc_stats.failed++;
}
@@ -693,7 +723,8 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
char retval = 0xFF;
if (info->buf_start < info->buf_count)
@@ -705,7 +736,8 @@ static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
u16 retval = 0xFFFF;
if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
@@ -717,7 +749,8 @@ static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(buf, info->data_buff + info->buf_start, real_len);
@@ -727,7 +760,8 @@ static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
const uint8_t *buf, int len)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
memcpy(info->data_buff + info->buf_start, buf, real_len);
@@ -747,7 +781,8 @@ static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
/* pxa3xx_nand_send_command has waited for command complete */
if (this->state == FL_WRITING || this->state == FL_ERASING) {
@@ -770,54 +805,70 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
{
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct pxa3xx_nand_host *host = info->host[info->cs];
uint32_t ndcr = 0x0; /* enable all interrupts */
- if (f->page_size != 2048 && f->page_size != 512)
+ if (f->page_size != 2048 && f->page_size != 512) {
+ dev_err(&pdev->dev, "Current only support 2048 and 512 size\n");
return -EINVAL;
+ }
- if (f->flash_width != 16 && f->flash_width != 8)
+ if (f->flash_width != 16 && f->flash_width != 8) {
+ dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
return -EINVAL;
+ }
/* calculate flash information */
- info->cmdset = &default_cmdset;
- info->page_size = f->page_size;
- info->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
+ host->cmdset = &default_cmdset;
+ host->page_size = f->page_size;
+ host->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
/* calculate addressing information */
- info->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
+ host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
if (f->num_blocks * f->page_per_block > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
+ host->row_addr_cycles = 2;
ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
- ndcr |= (info->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
- ndcr |= NDCR_RD_ID_CNT(info->read_id_bytes);
+ ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
ndcr |= NDCR_SPARE_EN; /* enable spare by default */
- info->reg_ndcr = ndcr;
+ host->reg_ndcr = ndcr;
- pxa3xx_nand_set_timing(info, f->timing);
+ pxa3xx_nand_set_timing(host, f->timing);
return 0;
}
static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
{
+ /*
+ * We set 0 by hard coding here, for we don't support keep_config
+ * when there is more than one chip attached to the controller
+ */
+ struct pxa3xx_nand_host *host = info->host[0];
uint32_t ndcr = nand_readl(info, NDCR);
- info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
- /* set info fields needed to read id */
- info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
- info->reg_ndcr = ndcr;
- info->cmdset = &default_cmdset;
- info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
- info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ if (ndcr & NDCR_PAGE_SZ) {
+ host->page_size = 2048;
+ host->read_id_bytes = 4;
+ } else {
+ host->page_size = 512;
+ host->read_id_bytes = 2;
+ }
+
+ host->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+ host->cmdset = &default_cmdset;
+
+ host->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ host->ndtr1cs0 = nand_readl(info, NDTR1CS0);
return 0;
}
@@ -847,7 +898,6 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
return -ENOMEM;
}
- info->data_buff_size = MAX_BUFF_SIZE;
info->data_desc = (void *)info->data_buff + data_desc_offset;
info->data_desc_addr = info->data_buff_phys + data_desc_offset;
@@ -855,7 +905,7 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
pxa3xx_nand_data_dma_irq, info);
if (info->data_dma_ch < 0) {
dev_err(&pdev->dev, "failed to request data dma\n");
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
return info->data_dma_ch;
}
@@ -865,24 +915,28 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
{
- struct mtd_info *mtd = info->mtd;
- struct nand_chip *chip = mtd->priv;
-
+ struct mtd_info *mtd;
+ int ret;
+ mtd = info->host[info->cs]->mtd;
/* use the common timing to make a try */
- pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
- chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
+ if (ret)
+ return ret;
+
+ pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
if (info->is_ready)
- return 1;
- else
return 0;
+
+ return -ENODEV;
}
static int pxa3xx_nand_scan(struct mtd_info *mtd)
{
- struct pxa3xx_nand_info *info = mtd->priv;
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
struct platform_device *pdev = info->pdev;
struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
- struct nand_flash_dev pxa3xx_flash_ids[2] = { {NULL,}, {NULL,} };
+ struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
const struct pxa3xx_nand_flash *f = NULL;
struct nand_chip *chip = mtd->priv;
uint32_t id = -1;
@@ -893,22 +947,20 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
goto KEEP_CONFIG;
ret = pxa3xx_nand_sensing(info);
- if (!ret) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_INFO "There is no nand chip on cs 0!\n");
+ if (ret) {
+ dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+ info->cs);
- return -EINVAL;
+ return ret;
}
chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
id = *((uint16_t *)(info->data_buff));
if (id != 0)
- printk(KERN_INFO "Detect a flash id %x\n", id);
+ dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
else {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
+ dev_warn(&info->pdev->dev,
+ "Read out ID 0, potential timing set wrong!!\n");
return -EINVAL;
}
@@ -926,14 +978,17 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
}
if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1)) {
- kfree(mtd);
- info->mtd = NULL;
- printk(KERN_ERR "ERROR!! flash not defined!!!\n");
+ dev_err(&info->pdev->dev, "ERROR!! flash not defined!!!\n");
return -EINVAL;
}
- pxa3xx_nand_config_flash(info, f);
+ ret = pxa3xx_nand_config_flash(info, f);
+ if (ret) {
+ dev_err(&info->pdev->dev, "ERROR! Configure failed\n");
+ return ret;
+ }
+
pxa3xx_flash_ids[0].name = f->name;
pxa3xx_flash_ids[0].id = (f->chip_id >> 8) & 0xffff;
pxa3xx_flash_ids[0].pagesize = f->page_size;
@@ -942,62 +997,78 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
if (f->flash_width == 16)
pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
+ pxa3xx_flash_ids[1].name = NULL;
+ def = pxa3xx_flash_ids;
KEEP_CONFIG:
- if (nand_scan_ident(mtd, 1, pxa3xx_flash_ids))
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = host->page_size;
+
+ chip->options = NAND_NO_AUTOINCR;
+ chip->options |= NAND_NO_READRDY;
+ if (host->reg_ndcr & NDCR_DWIDTH_M)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (nand_scan_ident(mtd, 1, def))
return -ENODEV;
/* calculate addressing information */
- info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1;
+ if (mtd->writesize >= 2048)
+ host->col_addr_cycles = 2;
+ else
+ host->col_addr_cycles = 1;
+
info->oob_buff = info->data_buff + mtd->writesize;
if ((mtd->size >> chip->page_shift) > 65536)
- info->row_addr_cycles = 3;
+ host->row_addr_cycles = 3;
else
- info->row_addr_cycles = 2;
- mtd->name = mtd_names[0];
- chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.size = f->page_size;
-
- chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0;
- chip->options |= NAND_NO_AUTOINCR;
- chip->options |= NAND_NO_READRDY;
+ host->row_addr_cycles = 2;
+ mtd->name = mtd_names[0];
return nand_scan_tail(mtd);
}
-static
-struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
+static int alloc_nand_resource(struct platform_device *pdev)
{
+ struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ struct pxa3xx_nand_host *host;
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *r;
- int ret, irq;
+ int ret, irq, cs;
- mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
- GFP_KERNEL);
- if (!mtd) {
+ pdata = pdev->dev.platform_data;
+ info = kzalloc(sizeof(*info) + (sizeof(*mtd) +
+ sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
+ if (!info) {
dev_err(&pdev->dev, "failed to allocate memory\n");
- return NULL;
+ return -ENOMEM;
}
- info = (struct pxa3xx_nand_info *)(&mtd[1]);
- chip = (struct nand_chip *)(&mtd[1]);
info->pdev = pdev;
- info->mtd = mtd;
- mtd->priv = info;
- mtd->owner = THIS_MODULE;
-
- chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
- chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
- chip->controller = &info->controller;
- chip->waitfunc = pxa3xx_nand_waitfunc;
- chip->select_chip = pxa3xx_nand_select_chip;
- chip->dev_ready = pxa3xx_nand_dev_ready;
- chip->cmdfunc = pxa3xx_nand_cmdfunc;
- chip->read_word = pxa3xx_nand_read_word;
- chip->read_byte = pxa3xx_nand_read_byte;
- chip->read_buf = pxa3xx_nand_read_buf;
- chip->write_buf = pxa3xx_nand_write_buf;
- chip->verify_buf = pxa3xx_nand_verify_buf;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = (struct mtd_info *)((unsigned int)&info[1] +
+ (sizeof(*mtd) + sizeof(*host)) * cs);
+ chip = (struct nand_chip *)(&mtd[1]);
+ host = (struct pxa3xx_nand_host *)chip;
+ info->host[cs] = host;
+ host->mtd = mtd;
+ host->cs = cs;
+ host->info_data = info;
+ mtd->priv = host;
+ mtd->owner = THIS_MODULE;
+
+ chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
+ chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+ chip->cmdfunc = pxa3xx_nand_cmdfunc;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->verify_buf = pxa3xx_nand_verify_buf;
+ }
spin_lock_init(&chip->controller->lock);
init_waitqueue_head(&chip->controller->wq);
@@ -1070,13 +1141,13 @@ struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
platform_set_drvdata(pdev, info);
- return info;
+ return 0;
fail_free_buf:
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_coherent(&pdev->dev, info->data_buff_size,
+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
@@ -1088,17 +1159,21 @@ fail_put_clk:
clk_disable(info->clk);
clk_put(info->clk);
fail_free_mtd:
- kfree(mtd);
- return NULL;
+ kfree(info);
+ return ret;
}
static int pxa3xx_nand_remove(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
struct resource *r;
- int irq;
+ int irq, cs;
+ if (!info)
+ return 0;
+
+ pdata = pdev->dev.platform_data;
platform_set_drvdata(pdev, NULL);
irq = platform_get_irq(pdev, 0);
@@ -1106,7 +1181,7 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
- dma_free_writecombine(&pdev->dev, info->data_buff_size,
+ dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE,
info->data_buff, info->data_buff_phys);
} else
kfree(info->data_buff);
@@ -1118,10 +1193,9 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
clk_disable(info->clk);
clk_put(info->clk);
- if (mtd) {
- mtd_device_unregister(mtd);
- kfree(mtd);
- }
+ for (cs = 0; cs < pdata->num_cs; cs++)
+ nand_release(info->host[cs]->mtd);
+ kfree(info);
return 0;
}
@@ -1129,6 +1203,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
{
struct pxa3xx_nand_platform_data *pdata;
struct pxa3xx_nand_info *info;
+ int ret, cs, probe_success;
pdata = pdev->dev.platform_data;
if (!pdata) {
@@ -1136,52 +1211,88 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
return -ENODEV;
}
- info = alloc_nand_resource(pdev);
- if (info == NULL)
- return -ENOMEM;
-
- if (pxa3xx_nand_scan(info->mtd)) {
- dev_err(&pdev->dev, "failed to scan nand\n");
- pxa3xx_nand_remove(pdev);
- return -ENODEV;
+ ret = alloc_nand_resource(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "alloc nand resource failed\n");
+ return ret;
}
- if (mtd_has_cmdlinepart()) {
- const char *probes[] = { "cmdlinepart", NULL };
- struct mtd_partition *parts;
- int nr_parts;
+ info = platform_get_drvdata(pdev);
+ probe_success = 0;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ info->cs = cs;
+ ret = pxa3xx_nand_scan(info->host[cs]->mtd);
+ if (ret) {
+ dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
+ cs);
+ continue;
+ }
- nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0);
+ ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0,
+ pdata->parts[cs], pdata->nr_parts[cs]);
+ if (!ret)
+ probe_success = 1;
+ }
- if (nr_parts)
- return mtd_device_register(info->mtd, parts, nr_parts);
+ if (!probe_success) {
+ pxa3xx_nand_remove(pdev);
+ return -ENODEV;
}
- return mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts);
+ return 0;
}
#ifdef CONFIG_PM
static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
+ pdata = pdev->dev.platform_data;
if (info->state) {
dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
return -EAGAIN;
}
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->suspend(mtd);
+ }
+
return 0;
}
static int pxa3xx_nand_resume(struct platform_device *pdev)
{
struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ int cs;
- nand_writel(info, NDTR0CS0, info->ndtr0cs0);
- nand_writel(info, NDTR1CS0, info->ndtr1cs0);
- clk_enable(info->clk);
+ pdata = pdev->dev.platform_data;
+ /* We don't want to handle interrupt without calling mtd routine */
+ disable_int(info, NDCR_INT_MASK);
+
+ /*
+ * Directly set the chip select to a invalid value,
+ * then the driver would reset the timing according
+ * to current chip select at the beginning of cmdfunc
+ */
+ info->cs = 0xff;
+
+ /*
+ * As the spec says, the NDSR would be updated to 0x1800 when
+ * doing the nand_clk disable/enable.
+ * To prevent it damaging state machine of the driver, clear
+ * all status before resume
+ */
+ nand_writel(info, NDSR, NDSR_MASK);
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = info->host[cs]->mtd;
+ mtd->resume(mtd);
+ }
return 0;
}
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index cae2e013c98..f20f393bfda 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -1027,7 +1027,7 @@ void r852_shutdown(struct pci_dev *pci_dev)
}
#ifdef CONFIG_PM
-int r852_suspend(struct device *device)
+static int r852_suspend(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
@@ -1048,7 +1048,7 @@ int r852_suspend(struct device *device)
return 0;
}
-int r852_resume(struct device *device)
+static int r852_resume(struct device *device)
{
struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
@@ -1092,7 +1092,7 @@ static const struct pci_device_id r852_pci_id_tbl[] = {
MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
-SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
static struct pci_driver r852_pci_driver = {
.name = DRV_NAME,
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index c9f9127ff77..f309addc2fa 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -351,7 +351,7 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
return 0;
}
- /* Read the syndrom pattern from the FPGA and correct the bitorder */
+ /* Read the syndrome pattern from the FPGA and correct the bitorder */
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
for (i = 0; i < 8; i++) {
ecc[i] = bitrev8(*rs_ecc);
@@ -380,7 +380,7 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
/* Let the library code do its magic. */
res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL);
if (res > 0) {
- DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
+ pr_debug("rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res);
}
return res;
}
@@ -444,7 +444,6 @@ static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this,
len = mtd->writesize;
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
- printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
er_stat = 1;
goto out;
}
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 4405468f196..868685db671 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -723,7 +723,7 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
/* free the common resources */
- if (info->clk != NULL && !IS_ERR(info->clk)) {
+ if (!IS_ERR(info->clk)) {
s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
clk_put(info->clk);
}
@@ -744,26 +744,15 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
return 0;
}
-const char *part_probes[] = { "cmdlinepart", NULL };
static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
struct s3c2410_nand_mtd *mtd,
struct s3c2410_nand_set *set)
{
- struct mtd_partition *part_info;
- int nr_part = 0;
+ if (set)
+ mtd->mtd.name = set->name;
- if (set == NULL)
- return mtd_device_register(&mtd->mtd, NULL, 0);
-
- mtd->mtd.name = set->name;
- nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
-
- if (nr_part <= 0 && set->nr_partitions > 0) {
- nr_part = set->nr_partitions;
- part_info = set->partitions;
- }
-
- return mtd_device_register(&mtd->mtd, part_info, nr_part);
+ return mtd_device_parse_register(&mtd->mtd, NULL, 0,
+ set->partitions, set->nr_partitions);
}
/**
@@ -880,8 +869,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
/* If you use u-boot BBT creation code, specifying this flag will
* let the kernel fish out the BBT from the NAND, and also skip the
* full NAND scan that can take 1/2s or so. Little things... */
- if (set->flash_bbt)
- chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ if (set->flash_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ }
}
/**
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 19e24ed089e..619d2a50478 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -103,16 +103,12 @@ static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat,
return readb(sharpsl->io + ECCCNTR) != 0;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Main initialization routine
*/
static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
{
struct nand_chip *this;
- struct mtd_partition *sharpsl_partition_info;
- int nr_partitions;
struct resource *r;
int err = 0;
struct sharpsl_nand *sharpsl;
@@ -184,14 +180,9 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)
/* Register the partitions */
sharpsl->mtd.name = "sharpsl-nand";
- nr_partitions = parse_mtd_partitions(&sharpsl->mtd, part_probes, &sharpsl_partition_info, 0);
- if (nr_partitions <= 0) {
- nr_partitions = data->nr_partitions;
- sharpsl_partition_info = data->partitions;
- }
- err = mtd_device_register(&sharpsl->mtd, sharpsl_partition_info,
- nr_partitions);
+ err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0,
+ data->partitions, data->nr_partitions);
if (err)
goto err_add;
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index 43469715b3f..32ae5af7444 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -48,7 +48,7 @@ static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* As long as this function is called on erase block boundaries
it will work correctly for 256 byte nand */
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = MTD_OPS_PLACE_OOB;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
ops.oobbuf = (void *)&oob;
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index ca2d0555729..0fb24f9c232 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -155,8 +155,6 @@ static int socrates_nand_device_ready(struct mtd_info *mtd)
return 1;
}
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
/*
* Probe for the NAND device.
*/
@@ -166,8 +164,7 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev)
struct mtd_info *mtd;
struct nand_chip *nand_chip;
int res;
- struct mtd_partition *partitions = NULL;
- int num_partitions = 0;
+ struct mtd_part_parser_data ppdata;
/* Allocate memory for the device structure (and zero it) */
host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL);
@@ -193,6 +190,7 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev)
mtd->name = "socrates_nand";
mtd->owner = THIS_MODULE;
mtd->dev.parent = &ofdev->dev;
+ ppdata.of_node = ofdev->dev.of_node;
/*should never be accessed directly */
nand_chip->IO_ADDR_R = (void *)0xdeadbeef;
@@ -225,30 +223,10 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev)
goto out;
}
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- num_partitions = parse_mtd_partitions(mtd, part_probes,
- &partitions, 0);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
-#endif
-
- if (num_partitions == 0) {
- num_partitions = of_mtd_parse_partitions(&ofdev->dev,
- ofdev->dev.of_node,
- &partitions);
- if (num_partitions < 0) {
- res = num_partitions;
- goto release;
- }
- }
-
- res = mtd_device_register(mtd, partitions, num_partitions);
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (!res)
return res;
-release:
nand_release(mtd);
out:
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 11e8371b568..beebd95f769 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -121,9 +121,6 @@ struct tmio_nand {
#define mtd_to_tmio(m) container_of(m, struct tmio_nand, mtd)
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
/*--------------------------------------------------------------------------*/
@@ -381,8 +378,6 @@ static int tmio_probe(struct platform_device *dev)
struct tmio_nand *tmio;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
- struct mtd_partition *parts;
- int nbparts = 0;
int retval;
if (data == NULL)
@@ -461,15 +456,9 @@ static int tmio_probe(struct platform_device *dev)
goto err_scan;
}
/* Register the partitions */
-#ifdef CONFIG_MTD_CMDLINE_PARTS
- nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
-#endif
- if (nbparts <= 0 && data) {
- parts = data->partition;
- nbparts = data->num_partitions;
- }
-
- retval = mtd_device_register(mtd, parts, nbparts);
+ retval = mtd_device_parse_register(mtd, NULL, 0,
+ data ? data->partition : NULL,
+ data ? data->num_partitions : 0);
if (!retval)
return retval;
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index bfba4e39a6c..ace46fdaef5 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -74,7 +74,6 @@ struct txx9ndfmc_drvdata {
unsigned char hold; /* in gbusclock */
unsigned char spw; /* in gbusclock */
struct nand_hw_control hw_control;
- struct mtd_partition *parts[MAX_TXX9NDFMC_DEV];
};
static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
@@ -287,7 +286,6 @@ static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
static int __init txx9ndfmc_probe(struct platform_device *dev)
{
struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
- static const char *probes[] = { "cmdlinepart", NULL };
int hold, spw;
int i;
struct txx9ndfmc_drvdata *drvdata;
@@ -333,7 +331,6 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
struct txx9ndfmc_priv *txx9_priv;
struct nand_chip *chip;
struct mtd_info *mtd;
- int nr_parts;
if (!(plat->ch_mask & (1 << i)))
continue;
@@ -393,9 +390,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
}
mtd->name = txx9_priv->mtdname;
- nr_parts = parse_mtd_partitions(mtd, probes,
- &drvdata->parts[i], 0);
- mtd_device_register(mtd, drvdata->parts[i], nr_parts);
+ mtd_device_parse_register(mtd, NULL, 0, NULL, 0);
drvdata->mtds[i] = mtd;
}
@@ -421,7 +416,6 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
txx9_priv = chip->priv;
nand_release(mtd);
- kfree(drvdata->parts[i]);
kfree(txx9_priv->mtdname);
kfree(txx9_priv);
}