diff options
Diffstat (limited to 'drivers/media/platform/omap3isp/isppreview.c')
| -rw-r--r-- | drivers/media/platform/omap3isp/isppreview.c | 2348 |
1 files changed, 2348 insertions, 0 deletions
diff --git a/drivers/media/platform/omap3isp/isppreview.c b/drivers/media/platform/omap3isp/isppreview.c new file mode 100644 index 00000000000..1ae1c0909ed --- /dev/null +++ b/drivers/media/platform/omap3isp/isppreview.c @@ -0,0 +1,2348 @@ +/* + * isppreview.c + * + * TI OMAP3 ISP driver - Preview module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +#include "isp.h" +#include "ispreg.h" +#include "isppreview.h" + +/* Default values in Office Fluorescent Light for RGBtoRGB Blending */ +static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = { + { /* RGB-RGB Matrix */ + {0x01E2, 0x0F30, 0x0FEE}, + {0x0F9B, 0x01AC, 0x0FB9}, + {0x0FE0, 0x0EC0, 0x0260} + }, /* RGB Offset */ + {0x0000, 0x0000, 0x0000} +}; + +/* Default values in Office Fluorescent Light for RGB to YUV Conversion*/ +static struct omap3isp_prev_csc flr_prev_csc = { + { /* CSC Coef Matrix */ + {66, 129, 25}, + {-38, -75, 112}, + {112, -94 , -18} + }, /* CSC Offset */ + {0x0, 0x0, 0x0} +}; + +/* Default values in Office Fluorescent Light for CFA Gradient*/ +#define FLR_CFA_GRADTHRS_HORZ 0x28 +#define FLR_CFA_GRADTHRS_VERT 0x28 + +/* Default values in Office Fluorescent Light for Chroma Suppression*/ +#define FLR_CSUP_GAIN 0x0D +#define FLR_CSUP_THRES 0xEB + +/* Default values in Office Fluorescent Light for Noise Filter*/ +#define FLR_NF_STRGTH 0x03 + +/* Default values for White Balance */ +#define FLR_WBAL_DGAIN 0x100 +#define FLR_WBAL_COEF 0x20 + +/* Default values in Office Fluorescent Light for Black Adjustment*/ +#define FLR_BLKADJ_BLUE 0x0 +#define FLR_BLKADJ_GREEN 0x0 +#define FLR_BLKADJ_RED 0x0 + +#define DEF_DETECT_CORRECT_VAL 0xe + +/* + * Margins and image size limits. + * + * The preview engine crops several rows and columns internally depending on + * which filters are enabled. To avoid format changes when the filters are + * enabled or disabled (which would prevent them from being turned on or off + * during streaming), the driver assumes all the filters are enabled when + * computing sink crop and source format limits. + * + * If a filter is disabled, additional cropping is automatically added at the + * preview engine input by the driver to avoid overflow at line and frame end. + * This is completely transparent for applications. + * + * Median filter 4 pixels + * Noise filter, + * Faulty pixels correction 4 pixels, 4 lines + * CFA filter 4 pixels, 4 lines in Bayer mode + * 2 lines in other modes + * Color suppression 2 pixels + * or luma enhancement + * ------------------------------------------------------------- + * Maximum total 14 pixels, 8 lines + * + * The color suppression and luma enhancement filters are applied after bayer to + * YUV conversion. They thus can crop one pixel on the left and one pixel on the + * right side of the image without changing the color pattern. When both those + * filters are disabled, the driver must crop the two pixels on the same side of + * the image to avoid changing the bayer pattern. The left margin is thus set to + * 8 pixels and the right margin to 6 pixels. + */ + +#define PREV_MARGIN_LEFT 8 +#define PREV_MARGIN_RIGHT 6 +#define PREV_MARGIN_TOP 4 +#define PREV_MARGIN_BOTTOM 4 + +#define PREV_MIN_IN_WIDTH 64 +#define PREV_MIN_IN_HEIGHT 8 +#define PREV_MAX_IN_HEIGHT 16384 + +#define PREV_MIN_OUT_WIDTH 0 +#define PREV_MIN_OUT_HEIGHT 0 +#define PREV_MAX_OUT_WIDTH_REV_1 1280 +#define PREV_MAX_OUT_WIDTH_REV_2 3300 +#define PREV_MAX_OUT_WIDTH_REV_15 4096 + +/* + * Coeficient Tables for the submodules in Preview. + * Array is initialised with the values from.the tables text file. + */ + +/* + * CFA Filter Coefficient Table + * + */ +static u32 cfa_coef_table[4][OMAP3ISP_PREV_CFA_BLK_SIZE] = { +#include "cfa_coef_table.h" +}; + +/* + * Default Gamma Correction Table - All components + */ +static u32 gamma_table[] = { +#include "gamma_table.h" +}; + +/* + * Noise Filter Threshold table + */ +static u32 noise_filter_table[] = { +#include "noise_filter_table.h" +}; + +/* + * Luminance Enhancement Table + */ +static u32 luma_enhance_table[] = { +#include "luma_enhance_table.h" +}; + +/* + * preview_config_luma_enhancement - Configure the Luminance Enhancement table + */ +static void +preview_config_luma_enhancement(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_luma *yt = ¶ms->luma; + unsigned int i; + + isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) { + isp_reg_writel(isp, yt->table[i], + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + } +} + +/* + * preview_enable_luma_enhancement - Enable/disable Luminance Enhancement + */ +static void +preview_enable_luma_enhancement(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_YNENHEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_YNENHEN); +} + +/* + * preview_enable_invalaw - Enable/disable Inverse A-Law decompression + */ +static void preview_enable_invalaw(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); +} + +/* + * preview_config_hmed - Configure the Horizontal Median Filter + */ +static void preview_config_hmed(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_hmed *hmed = ¶ms->hmed; + + isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) | + (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) | + (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED); +} + +/* + * preview_enable_hmed - Enable/disable the Horizontal Median Filter + */ +static void preview_enable_hmed(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_HMEDEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_HMEDEN); +} + +/* + * preview_config_cfa - Configure CFA Interpolation for Bayer formats + * + * The CFA table is organised in four blocks, one per Bayer component. The + * hardware expects blocks to follow the Bayer order of the input data, while + * the driver stores the table in GRBG order in memory. The blocks need to be + * reordered to support non-GRBG Bayer patterns. + */ +static void preview_config_cfa(struct isp_prev_device *prev, + const struct prev_params *params) +{ + static const unsigned int cfa_coef_order[4][4] = { + { 0, 1, 2, 3 }, /* GRBG */ + { 1, 0, 3, 2 }, /* RGGB */ + { 2, 3, 0, 1 }, /* BGGR */ + { 3, 2, 1, 0 }, /* GBRG */ + }; + const unsigned int *order = cfa_coef_order[prev->params.cfa_order]; + const struct omap3isp_prev_cfa *cfa = ¶ms->cfa; + struct isp_device *isp = to_isp_device(prev); + unsigned int i; + unsigned int j; + + isp_reg_writel(isp, + (cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) | + (cfa->gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA); + + isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + + for (i = 0; i < 4; ++i) { + const __u32 *block = cfa->table[order[i]]; + + for (j = 0; j < OMAP3ISP_PREV_CFA_BLK_SIZE; ++j) + isp_reg_writel(isp, block[j], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); + } +} + +/* + * preview_config_chroma_suppression - Configure Chroma Suppression + */ +static void +preview_config_chroma_suppression(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_csup *cs = ¶ms->csup; + + isp_reg_writel(isp, + cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) | + (cs->hypf_en << ISPPRV_CSUP_HPYF_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP); +} + +/* + * preview_enable_chroma_suppression - Enable/disable Chrominance Suppression + */ +static void +preview_enable_chroma_suppression(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SUPEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SUPEN); +} + +/* + * preview_config_whitebalance - Configure White Balance parameters + * + * Coefficient matrix always with default values. + */ +static void +preview_config_whitebalance(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_wbal *wbal = ¶ms->wbal; + u32 val; + + isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN); + + val = wbal->coef0 << ISPPRV_WBGAIN_COEF0_SHIFT; + val |= wbal->coef1 << ISPPRV_WBGAIN_COEF1_SHIFT; + val |= wbal->coef2 << ISPPRV_WBGAIN_COEF2_SHIFT; + val |= wbal->coef3 << ISPPRV_WBGAIN_COEF3_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN); + + isp_reg_writel(isp, + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT | + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT | + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT | + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT, + OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL); +} + +/* + * preview_config_blkadj - Configure Black Adjustment + */ +static void +preview_config_blkadj(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_blkadj *blkadj = ¶ms->blkadj; + + isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) | + (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) | + (blkadj->red << ISPPRV_BLKADJOFF_R_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF); +} + +/* + * preview_config_rgb_blending - Configure RGB-RGB Blending + */ +static void +preview_config_rgb_blending(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_rgbtorgb *rgbrgb = ¶ms->rgb2rgb; + u32 val; + + val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT; + val |= (rgbrgb->matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1); + + val = (rgbrgb->matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT; + val |= (rgbrgb->matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2); + + val = (rgbrgb->matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT; + val |= (rgbrgb->matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3); + + val = (rgbrgb->matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT; + val |= (rgbrgb->matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4); + + val = (rgbrgb->matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5); + + val = (rgbrgb->offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT; + val |= (rgbrgb->offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1); + + val = (rgbrgb->offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2); +} + +/* + * preview_config_csc - Configure Color Space Conversion (RGB to YCbYCr) + */ +static void +preview_config_csc(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_csc *csc = ¶ms->csc; + u32 val; + + val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT; + val |= (csc->matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT; + val |= (csc->matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0); + + val = (csc->matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT; + val |= (csc->matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT; + val |= (csc->matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1); + + val = (csc->matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT; + val |= (csc->matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT; + val |= (csc->matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2); + + val = (csc->offset[0] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT; + val |= (csc->offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT; + val |= (csc->offset[2] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET); +} + +/* + * preview_config_yc_range - Configure the max and min Y and C values + */ +static void +preview_config_yc_range(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_yclimit *yc = ¶ms->yclimit; + + isp_reg_writel(isp, + yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT | + yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT | + yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT | + yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC); +} + +/* + * preview_config_dcor - Configure Couplet Defect Correction + */ +static void +preview_config_dcor(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_dcor *dcor = ¶ms->dcor; + + isp_reg_writel(isp, dcor->detect_correct[0], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0); + isp_reg_writel(isp, dcor->detect_correct[1], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1); + isp_reg_writel(isp, dcor->detect_correct[2], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2); + isp_reg_writel(isp, dcor->detect_correct[3], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCCOUP, + dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0); +} + +/* + * preview_enable_dcor - Enable/disable Couplet Defect Correction + */ +static void preview_enable_dcor(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCOREN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCOREN); +} + +/* + * preview_enable_drkframe_capture - Enable/disable Dark Frame Capture + */ +static void +preview_enable_drkframe_capture(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFCAP); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFCAP); +} + +/* + * preview_enable_drkframe - Enable/disable Dark Frame Subtraction + */ +static void preview_enable_drkframe(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFEN); +} + +/* + * preview_config_noisefilter - Configure the Noise Filter + */ +static void +preview_config_noisefilter(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_nf *nf = ¶ms->nf; + unsigned int i; + + isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF); + isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) { + isp_reg_writel(isp, nf->table[i], + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + } +} + +/* + * preview_enable_noisefilter - Enable/disable the Noise Filter + */ +static void +preview_enable_noisefilter(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_NFEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_NFEN); +} + +/* + * preview_config_gammacorrn - Configure the Gamma Correction tables + */ +static void +preview_config_gammacorrn(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_gtables *gt = ¶ms->gamma; + unsigned int i; + + isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); + + isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); + + isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); +} + +/* + * preview_enable_gammacorrn - Enable/disable Gamma Correction + * + * When gamma correction is disabled, the module is bypassed and its output is + * the 8 MSB of the 10-bit input . + */ +static void +preview_enable_gammacorrn(struct isp_prev_device *prev, bool enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_GAMMA_BYPASS); + else + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_GAMMA_BYPASS); +} + +/* + * preview_config_contrast - Configure the Contrast + * + * Value should be programmed before enabling the module. + */ +static void +preview_config_contrast(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, + 0xff << ISPPRV_CNT_BRT_CNT_SHIFT, + params->contrast << ISPPRV_CNT_BRT_CNT_SHIFT); +} + +/* + * preview_config_brightness - Configure the Brightness + */ +static void +preview_config_brightness(struct isp_prev_device *prev, + const struct prev_params *params) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, + 0xff << ISPPRV_CNT_BRT_BRT_SHIFT, + params->brightness << ISPPRV_CNT_BRT_BRT_SHIFT); +} + +/* + * preview_update_contrast - Updates the contrast. + * @contrast: Pointer to hold the current programmed contrast value. + * + * Value should be programmed before enabling the module. + */ +static void +preview_update_contrast(struct isp_prev_device *prev, u8 contrast) +{ + struct prev_params *params; + unsigned long flags; + + spin_lock_irqsave(&prev->params.lock, flags); + params = (prev->params.active & OMAP3ISP_PREV_CONTRAST) + ? &prev->params.params[0] : &prev->params.params[1]; + + if (params->contrast != (contrast * ISPPRV_CONTRAST_UNITS)) { + params->contrast = contrast * ISPPRV_CONTRAST_UNITS; + params->update |= OMAP3ISP_PREV_CONTRAST; + } + spin_unlock_irqrestore(&prev->params.lock, flags); +} + +/* + * preview_update_brightness - Updates the brightness in preview module. + * @brightness: Pointer to hold the current programmed brightness value. + * + */ +static void +preview_update_brightness(struct isp_prev_device *prev, u8 brightness) +{ + struct prev_params *params; + unsigned long flags; + + spin_lock_irqsave(&prev->params.lock, flags); + params = (prev->params.active & OMAP3ISP_PREV_BRIGHTNESS) + ? &prev->params.params[0] : &prev->params.params[1]; + + if (params->brightness != (brightness * ISPPRV_BRIGHT_UNITS)) { + params->brightness = brightness * ISPPRV_BRIGHT_UNITS; + params->update |= OMAP3ISP_PREV_BRIGHTNESS; + } + spin_unlock_irqrestore(&prev->params.lock, flags); +} + +static u32 +preview_params_lock(struct isp_prev_device *prev, u32 update, bool shadow) +{ + u32 active = prev->params.active; + + if (shadow) { + /* Mark all shadow parameters we are going to touch as busy. */ + prev->params.params[0].busy |= ~active & update; + prev->params.params[1].busy |= active & update; + } else { + /* Mark all active parameters we are going to touch as busy. */ + update = (prev->params.params[0].update & active) + | (prev->params.params[1].update & ~active); + + prev->params.params[0].busy |= active & update; + prev->params.params[1].busy |= ~active & update; + } + + return update; +} + +static void +preview_params_unlock(struct isp_prev_device *prev, u32 update, bool shadow) +{ + u32 active = prev->params.active; + + if (shadow) { + /* Set the update flag for shadow parameters that have been + * updated and clear the busy flag for all shadow parameters. + */ + prev->params.params[0].update |= (~active & update); + prev->params.params[1].update |= (active & update); + prev->params.params[0].busy &= active; + prev->params.params[1].busy &= ~active; + } else { + /* Clear the update flag for active parameters that have been + * applied and the busy flag for all active parameters. + */ + prev->params.params[0].update &= ~(active & update); + prev->params.params[1].update &= ~(~active & update); + prev->params.params[0].busy &= ~active; + prev->params.params[1].busy &= active; + } +} + +static void preview_params_switch(struct isp_prev_device *prev) +{ + u32 to_switch; + + /* Switch active parameters with updated shadow parameters when the + * shadow parameter has been updated and neither the active not the + * shadow parameter is busy. + */ + to_switch = (prev->params.params[0].update & ~prev->params.active) + | (prev->params.params[1].update & prev->params.active); + to_switch &= ~(prev->params.params[0].busy | + prev->params.params[1].busy); + if (to_switch == 0) + return; + + prev->params.active ^= to_switch; + + /* Remove the update flag for the shadow copy of parameters we have + * switched. + */ + prev->params.params[0].update &= ~(~prev->params.active & to_switch); + prev->params.params[1].update &= ~(prev->params.active & to_switch); +} + +/* preview parameters update structure */ +struct preview_update { + void (*config)(struct isp_prev_device *, const struct prev_params *); + void (*enable)(struct isp_prev_device *, bool); + unsigned int param_offset; + unsigned int param_size; + unsigned int config_offset; + bool skip; +}; + +/* Keep the array indexed by the OMAP3ISP_PREV_* bit number. */ +static const struct preview_update update_attrs[] = { + /* OMAP3ISP_PREV_LUMAENH */ { + preview_config_luma_enhancement, + preview_enable_luma_enhancement, + offsetof(struct prev_params, luma), + FIELD_SIZEOF(struct prev_params, luma), + offsetof(struct omap3isp_prev_update_config, luma), + }, /* OMAP3ISP_PREV_INVALAW */ { + NULL, + preview_enable_invalaw, + }, /* OMAP3ISP_PREV_HRZ_MED */ { + preview_config_hmed, + preview_enable_hmed, + offsetof(struct prev_params, hmed), + FIELD_SIZEOF(struct prev_params, hmed), + offsetof(struct omap3isp_prev_update_config, hmed), + }, /* OMAP3ISP_PREV_CFA */ { + preview_config_cfa, + NULL, + offsetof(struct prev_params, cfa), + FIELD_SIZEOF(struct prev_params, cfa), + offsetof(struct omap3isp_prev_update_config, cfa), + }, /* OMAP3ISP_PREV_CHROMA_SUPP */ { + preview_config_chroma_suppression, + preview_enable_chroma_suppression, + offsetof(struct prev_params, csup), + FIELD_SIZEOF(struct prev_params, csup), + offsetof(struct omap3isp_prev_update_config, csup), + }, /* OMAP3ISP_PREV_WB */ { + preview_config_whitebalance, + NULL, + offsetof(struct prev_params, wbal), + FIELD_SIZEOF(struct prev_params, wbal), + offsetof(struct omap3isp_prev_update_config, wbal), + }, /* OMAP3ISP_PREV_BLKADJ */ { + preview_config_blkadj, + NULL, + offsetof(struct prev_params, blkadj), + FIELD_SIZEOF(struct prev_params, blkadj), + offsetof(struct omap3isp_prev_update_config, blkadj), + }, /* OMAP3ISP_PREV_RGB2RGB */ { + preview_config_rgb_blending, + NULL, + offsetof(struct prev_params, rgb2rgb), + FIELD_SIZEOF(struct prev_params, rgb2rgb), + offsetof(struct omap3isp_prev_update_config, rgb2rgb), + }, /* OMAP3ISP_PREV_COLOR_CONV */ { + preview_config_csc, + NULL, + offsetof(struct prev_params, csc), + FIELD_SIZEOF(struct prev_params, csc), + offsetof(struct omap3isp_prev_update_config, csc), + }, /* OMAP3ISP_PREV_YC_LIMIT */ { + preview_config_yc_range, + NULL, + offsetof(struct prev_params, yclimit), + FIELD_SIZEOF(struct prev_params, yclimit), + offsetof(struct omap3isp_prev_update_config, yclimit), + }, /* OMAP3ISP_PREV_DEFECT_COR */ { + preview_config_dcor, + preview_enable_dcor, + offsetof(struct prev_params, dcor), + FIELD_SIZEOF(struct prev_params, dcor), + offsetof(struct omap3isp_prev_update_config, dcor), + }, /* Previously OMAP3ISP_PREV_GAMMABYPASS, not used anymore */ { + NULL, + NULL, + }, /* OMAP3ISP_PREV_DRK_FRM_CAPTURE */ { + NULL, + preview_enable_drkframe_capture, + }, /* OMAP3ISP_PREV_DRK_FRM_SUBTRACT */ { + NULL, + preview_enable_drkframe, + }, /* OMAP3ISP_PREV_LENS_SHADING */ { + NULL, + preview_enable_drkframe, + }, /* OMAP3ISP_PREV_NF */ { + preview_config_noisefilter, + preview_enable_noisefilter, + offsetof(struct prev_params, nf), + FIELD_SIZEOF(struct prev_params, nf), + offsetof(struct omap3isp_prev_update_config, nf), + }, /* OMAP3ISP_PREV_GAMMA */ { + preview_config_gammacorrn, + preview_enable_gammacorrn, + offsetof(struct prev_params, gamma), + FIELD_SIZEOF(struct prev_params, gamma), + offsetof(struct omap3isp_prev_update_config, gamma), + }, /* OMAP3ISP_PREV_CONTRAST */ { + preview_config_contrast, + NULL, + 0, 0, 0, true, + }, /* OMAP3ISP_PREV_BRIGHTNESS */ { + preview_config_brightness, + NULL, + 0, 0, 0, true, + }, +}; + +/* + * preview_config - Copy and update local structure with userspace preview + * configuration. + * @prev: ISP preview engine + * @cfg: Configuration + * + * Return zero if success or -EFAULT if the configuration can't be copied from + * userspace. + */ +static int preview_config(struct isp_prev_device *prev, + struct omap3isp_prev_update_config *cfg) +{ + unsigned long flags; + unsigned int i; + int rval = 0; + u32 update; + u32 active; + + if (cfg->update == 0) + return 0; + + /* Mark the shadow parameters we're going to update as busy. */ + spin_lock_irqsave(&prev->params.lock, flags); + preview_params_lock(prev, cfg->update, true); + active = prev->params.active; + spin_unlock_irqrestore(&prev->params.lock, flags); + + update = 0; + + for (i = 0; i < ARRAY_SIZE(update_attrs); i++) { + const struct preview_update *attr = &update_attrs[i]; + struct prev_params *params; + unsigned int bit = 1 << i; + + if (attr->skip || !(cfg->update & bit)) + continue; + + params = &prev->params.params[!!(active & bit)]; + + if (cfg->flag & bit) { + void __user *from = *(void * __user *) + ((void *)cfg + attr->config_offset); + void *to = (void *)params + attr->param_offset; + size_t size = attr->param_size; + + if (to && from && size) { + if (copy_from_user(to, from, size)) { + rval = -EFAULT; + break; + } + } + params->features |= bit; + } else { + params->features &= ~bit; + } + + update |= bit; + } + + spin_lock_irqsave(&prev->params.lock, flags); + preview_params_unlock(prev, update, true); + preview_params_switch(prev); + spin_unlock_irqrestore(&prev->params.lock, flags); + + return rval; +} + +/* + * preview_setup_hw - Setup preview registers and/or internal memory + * @prev: pointer to preview private structure + * @update: Bitmask of parameters to setup + * @active: Bitmask of parameters active in set 0 + * Note: can be called from interrupt context + * Return none + */ +static void preview_setup_hw(struct isp_prev_device *prev, u32 update, + u32 active) +{ + unsigned int i; + u32 features; + + if (update == 0) + return; + + features = (prev->params.params[0].features & active) + | (prev->params.params[1].features & ~active); + + for (i = 0; i < ARRAY_SIZE(update_attrs); i++) { + const struct preview_update *attr = &update_attrs[i]; + struct prev_params *params; + unsigned int bit = 1 << i; + + if (!(update & bit)) + continue; + + params = &prev->params.params[!(active & bit)]; + + if (params->features & bit) { + if (attr->config) + attr->config(prev, params); + if (attr->enable) + attr->enable(prev, true); + } else { + if (attr->enable) + attr->enable(prev, false); + } + } +} + +/* + * preview_config_ycpos - Configure byte layout of YUV image. + * @mode: Indicates the required byte layout. + */ +static void +preview_config_ycpos(struct isp_prev_device *prev, + enum v4l2_mbus_pixelcode pixelcode) +{ + struct isp_device *isp = to_isp_device(prev); + enum preview_ycpos_mode mode; + + switch (pixelcode) { + case V4L2_MBUS_FMT_YUYV8_1X16: + mode = YCPOS_CrYCbY; + break; + case V4L2_MBUS_FMT_UYVY8_1X16: + mode = YCPOS_YCrYCb; + break; + default: + return; + } + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_YCPOS_CrYCbY, + mode << ISPPRV_PCR_YCPOS_SHIFT); +} + +/* + * preview_config_averager - Enable / disable / configure averager + * @average: Average value to be configured. + */ +static void preview_config_averager(struct isp_prev_device *prev, u8 average) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT | + ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT | + average, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); +} + + +/* + * preview_config_input_format - Configure the input format + * @prev: The preview engine + * @format: Format on the preview engine sink pad + * + * Enable and configure CFA interpolation for Bayer formats and disable it for + * greyscale formats. + * + * The CFA table is organised in four blocks, one per Bayer component. The + * hardware expects blocks to follow the Bayer order of the input data, while + * the driver stores the table in GRBG order in memory. The blocks need to be + * reordered to support non-GRBG Bayer patterns. + */ +static void preview_config_input_format(struct isp_prev_device *prev, + const struct v4l2_mbus_framefmt *format) +{ + struct isp_device *isp = to_isp_device(prev); + struct prev_params *params; + + switch (format->code) { + case V4L2_MBUS_FMT_SGRBG10_1X10: + prev->params.cfa_order = 0; + break; + case V4L2_MBUS_FMT_SRGGB10_1X10: + prev->params.cfa_order = 1; + break; + case V4L2_MBUS_FMT_SBGGR10_1X10: + prev->params.cfa_order = 2; + break; + case V4L2_MBUS_FMT_SGBRG10_1X10: + prev->params.cfa_order = 3; + break; + default: + /* Disable CFA for non-Bayer formats. */ + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_CFAEN); + return; + } + + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_CFAFMT_MASK, ISPPRV_PCR_CFAFMT_BAYER); + + params = (prev->params.active & OMAP3ISP_PREV_CFA) + ? &prev->params.params[0] : &prev->params.params[1]; + + preview_config_cfa(prev, params); +} + +/* + * preview_config_input_size - Configure the input frame size + * + * The preview engine crops several rows and columns internally depending on + * which processing blocks are enabled. The driver assumes all those blocks are + * enabled when reporting source pad formats to userspace. If this assumption is + * not true, rows and columns must be manually cropped at the preview engine + * input to avoid overflows at the end of lines and frames. + * + * See the explanation at the PREV_MARGIN_* definitions for more details. + */ +static void preview_config_input_size(struct isp_prev_device *prev, u32 active) +{ + const struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK]; + struct isp_device *isp = to_isp_device(prev); + unsigned int sph = prev->crop.left; + unsigned int eph = prev->crop.left + prev->crop.width - 1; + unsigned int slv = prev->crop.top; + unsigned int elv = prev->crop.top + prev->crop.height - 1; + u32 features; + + if (format->code != V4L2_MBUS_FMT_Y10_1X10) { + sph -= 2; + eph += 2; + slv -= 2; + elv += 2; + } + + features = (prev->params.params[0].features & active) + | (prev->params.params[1].features & ~active); + + if (features & (OMAP3ISP_PREV_DEFECT_COR | OMAP3ISP_PREV_NF)) { + sph -= 2; + eph += 2; + slv -= 2; + elv += 2; + } + if (features & OMAP3ISP_PREV_HRZ_MED) { + sph -= 2; + eph += 2; + } + if (features & (OMAP3ISP_PREV_CHROMA_SUPP | OMAP3ISP_PREV_LUMAENH)) + sph -= 2; + + isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph, + OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO); + isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv, + OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO); +} + +/* + * preview_config_inlineoffset - Configures the Read address line offset. + * @prev: Preview module + * @offset: Line offset + * + * According to the TRM, the line offset must be aligned on a 32 bytes boundary. + * However, a hardware bug requires the memory start address to be aligned on a + * 64 bytes boundary, so the offset probably should be aligned on 64 bytes as + * well. + */ +static void +preview_config_inlineoffset(struct isp_prev_device *prev, u32 offset) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV, + ISPPRV_RADR_OFFSET); +} + +/* + * preview_set_inaddr - Sets memory address of input frame. + * @addr: 32bit memory address aligned on 32byte boundary. + * + * Configures the memory address from which the input frame is to be read. + */ +static void preview_set_inaddr(struct isp_prev_device *prev, u32 addr) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR); +} + +/* + * preview_config_outlineoffset - Configures the Write address line offset. + * @offset: Line Offset for the preview output. + * + * The offset must be a multiple of 32 bytes. + */ +static void preview_config_outlineoffset(struct isp_prev_device *prev, + u32 offset) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV, + ISPPRV_WADD_OFFSET); +} + +/* + * preview_set_outaddr - Sets the memory address to store output frame + * @addr: 32bit memory address aligned on 32byte boundary. + * + * Configures the memory address to which the output frame is written. + */ +static void preview_set_outaddr(struct isp_prev_device *prev, u32 addr) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR); +} + +static void preview_adjust_bandwidth(struct isp_prev_device *prev) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity); + struct isp_device *isp = to_isp_device(prev); + const struct v4l2_mbus_framefmt *ifmt = &prev->formats[PREV_PAD_SINK]; + unsigned long l3_ick = pipe->l3_ick; + struct v4l2_fract *timeperframe; + unsigned int cycles_per_frame; + unsigned int requests_per_frame; + unsigned int cycles_per_request; + unsigned int minimum; + unsigned int maximum; + unsigned int value; + + if (prev->input != PREVIEW_INPUT_MEMORY) { + isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP, + ISPSBL_SDR_REQ_PRV_EXP_MASK); + return; + } + + /* Compute the minimum number of cycles per request, based on the + * pipeline maximum data rate. This is an absolute lower bound if we + * don't want SBL overflows, so round the value up. + */ + cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1, + pipe->max_rate); + minimum = DIV_ROUND_UP(cycles_per_request, 32); + + /* Compute the maximum number of cycles per request, based on the + * requested frame rate. This is a soft upper bound to achieve a frame + * rate equal or higher than the requested value, so round the value + * down. + */ + timeperframe = &pipe->max_timeperframe; + + requests_per_frame = DIV_ROUND_UP(ifmt->width * 2, 256) * ifmt->height; + cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator, + timeperframe->denominator); + cycles_per_request = cycles_per_frame / requests_per_frame; + + maximum = cycles_per_request / 32; + + value = max(minimum, maximum); + + dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP, + ISPSBL_SDR_REQ_PRV_EXP_MASK, + value << ISPSBL_SDR_REQ_PRV_EXP_SHIFT); +} + +/* + * omap3isp_preview_busy - Gets busy state of preview module. + */ +int omap3isp_preview_busy(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + return isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR) + & ISPPRV_PCR_BUSY; +} + +/* + * omap3isp_preview_restore_context - Restores the values of preview registers + */ +void omap3isp_preview_restore_context(struct isp_device *isp) +{ + struct isp_prev_device *prev = &isp->isp_prev; + const u32 update = OMAP3ISP_PREV_FEATURES_END - 1; + + prev->params.params[0].update = prev->params.active & update; + prev->params.params[1].update = ~prev->params.active & update; + + preview_setup_hw(prev, update, prev->params.active); + + prev->params.params[0].update = 0; + prev->params.params[1].update = 0; +} + +/* + * preview_print_status - Dump preview module registers to the kernel log + */ +#define PREV_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###PRV " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_##name)) + +static void preview_print_status(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + dev_dbg(isp->dev, "-------------Preview Register dump----------\n"); + + PREV_PRINT_REGISTER(isp, PCR); + PREV_PRINT_REGISTER(isp, HORZ_INFO); + PREV_PRINT_REGISTER(isp, VERT_INFO); + PREV_PRINT_REGISTER(isp, RSDR_ADDR); + PREV_PRINT_REGISTER(isp, RADR_OFFSET); + PREV_PRINT_REGISTER(isp, DSDR_ADDR); + PREV_PRINT_REGISTER(isp, DRKF_OFFSET); + PREV_PRINT_REGISTER(isp, WSDR_ADDR); + PREV_PRINT_REGISTER(isp, WADD_OFFSET); + PREV_PRINT_REGISTER(isp, AVE); + PREV_PRINT_REGISTER(isp, HMED); + PREV_PRINT_REGISTER(isp, NF); + PREV_PRINT_REGISTER(isp, WB_DGAIN); + PREV_PRINT_REGISTER(isp, WBGAIN); + PREV_PRINT_REGISTER(isp, WBSEL); + PREV_PRINT_REGISTER(isp, CFA); + PREV_PRINT_REGISTER(isp, BLKADJOFF); + PREV_PRINT_REGISTER(isp, RGB_MAT1); + PREV_PRINT_REGISTER(isp, RGB_MAT2); + PREV_PRINT_REGISTER(isp, RGB_MAT3); + PREV_PRINT_REGISTER(isp, RGB_MAT4); + PREV_PRINT_REGISTER(isp, RGB_MAT5); + PREV_PRINT_REGISTER(isp, RGB_OFF1); + PREV_PRINT_REGISTER(isp, RGB_OFF2); + PREV_PRINT_REGISTER(isp, CSC0); + PREV_PRINT_REGISTER(isp, CSC1); + PREV_PRINT_REGISTER(isp, CSC2); + PREV_PRINT_REGISTER(isp, CSC_OFFSET); + PREV_PRINT_REGISTER(isp, CNT_BRT); + PREV_PRINT_REGISTER(isp, CSUP); + PREV_PRINT_REGISTER(isp, SETUP_YC); + PREV_PRINT_REGISTER(isp, SET_TBL_ADDR); + PREV_PRINT_REGISTER(isp, CDC_THR0); + PREV_PRINT_REGISTER(isp, CDC_THR1); + PREV_PRINT_REGISTER(isp, CDC_THR2); + PREV_PRINT_REGISTER(isp, CDC_THR3); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* + * preview_init_params - init image processing parameters. + * @prev: pointer to previewer private structure + */ +static void preview_init_params(struct isp_prev_device *prev) +{ + struct prev_params *params; + unsigned int i; + + spin_lock_init(&prev->params.lock); + + prev->params.active = ~0; + prev->params.params[0].busy = 0; + prev->params.params[0].update = OMAP3ISP_PREV_FEATURES_END - 1; + prev->params.params[1].busy = 0; + prev->params.params[1].update = 0; + + params = &prev->params.params[0]; + + /* Init values */ + params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS; + params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS; + params->cfa.format = OMAP3ISP_CFAFMT_BAYER; + memcpy(params->cfa.table, cfa_coef_table, + sizeof(params->cfa.table)); + params->cfa.gradthrs_horz = FLR_CFA_GRADTHRS_HORZ; + params->cfa.gradthrs_vert = FLR_CFA_GRADTHRS_VERT; + params->csup.gain = FLR_CSUP_GAIN; + params->csup.thres = FLR_CSUP_THRES; + params->csup.hypf_en = 0; + memcpy(params->luma.table, luma_enhance_table, + sizeof(params->luma.table)); + params->nf.spread = FLR_NF_STRGTH; + memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table)); + params->dcor.couplet_mode_en = 1; + for (i = 0; i < OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS; i++) + params->dcor.detect_correct[i] = DEF_DETECT_CORRECT_VAL; + memcpy(params->gamma.blue, gamma_table, sizeof(params->gamma.blue)); + memcpy(params->gamma.green, gamma_table, sizeof(params->gamma.green)); + memcpy(params->gamma.red, gamma_table, sizeof(params->gamma.red)); + params->wbal.dgain = FLR_WBAL_DGAIN; + params->wbal.coef0 = FLR_WBAL_COEF; + params->wbal.coef1 = FLR_WBAL_COEF; + params->wbal.coef2 = FLR_WBAL_COEF; + params->wbal.coef3 = FLR_WBAL_COEF; + params->blkadj.red = FLR_BLKADJ_RED; + params->blkadj.green = FLR_BLKADJ_GREEN; + params->blkadj.blue = FLR_BLKADJ_BLUE; + params->rgb2rgb = flr_rgb2rgb; + params->csc = flr_prev_csc; + params->yclimit.minC = ISPPRV_YC_MIN; + params->yclimit.maxC = ISPPRV_YC_MAX; + params->yclimit.minY = ISPPRV_YC_MIN; + params->yclimit.maxY = ISPPRV_YC_MAX; + + params->features = OMAP3ISP_PREV_CFA | OMAP3ISP_PREV_DEFECT_COR + | OMAP3ISP_PREV_NF | OMAP3ISP_PREV_GAMMA + | OMAP3ISP_PREV_BLKADJ | OMAP3ISP_PREV_YC_LIMIT + | OMAP3ISP_PREV_RGB2RGB | OMAP3ISP_PREV_COLOR_CONV + | OMAP3ISP_PREV_WB | OMAP3ISP_PREV_BRIGHTNESS + | OMAP3ISP_PREV_CONTRAST; +} + +/* + * preview_max_out_width - Handle previewer hardware ouput limitations + * @isp_revision : ISP revision + * returns maximum width output for current isp revision + */ +static unsigned int preview_max_out_width(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + switch (isp->revision) { + case ISP_REVISION_1_0: + return PREV_MAX_OUT_WIDTH_REV_1; + + case ISP_REVISION_2_0: + default: + return PREV_MAX_OUT_WIDTH_REV_2; + + case ISP_REVISION_15_0: + return PREV_MAX_OUT_WIDTH_REV_15; + } +} + +static void preview_configure(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + struct v4l2_mbus_framefmt *format; + unsigned long flags; + u32 update; + u32 active; + + spin_lock_irqsave(&prev->params.lock, flags); + /* Mark all active parameters we are going to touch as busy. */ + update = preview_params_lock(prev, 0, false); + active = prev->params.active; + spin_unlock_irqrestore(&prev->params.lock, flags); + + /* PREV_PAD_SINK */ + format = &prev->formats[PREV_PAD_SINK]; + + preview_adjust_bandwidth(prev); + + preview_config_input_format(prev, format); + preview_config_input_size(prev, active); + + if (prev->input == PREVIEW_INPUT_CCDC) + preview_config_inlineoffset(prev, 0); + else + preview_config_inlineoffset(prev, + ALIGN(format->width, 0x20) * 2); + + preview_setup_hw(prev, update, active); + + /* PREV_PAD_SOURCE */ + format = &prev->formats[PREV_PAD_SOURCE]; + + if (prev->output & PREVIEW_OUTPUT_MEMORY) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + + if (prev->output & PREVIEW_OUTPUT_RESIZER) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + + if (prev->output & PREVIEW_OUTPUT_MEMORY) + preview_config_outlineoffset(prev, + ALIGN(format->width, 0x10) * 2); + + preview_config_averager(prev, 0); + preview_config_ycpos(prev, format->code); + + spin_lock_irqsave(&prev->params.lock, flags); + preview_params_unlock(prev, update, false); + spin_unlock_irqrestore(&prev->params.lock, flags); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +static void preview_enable_oneshot(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + /* The PCR.SOURCE bit is automatically reset to 0 when the PCR.ENABLE + * bit is set. As the preview engine is used in single-shot mode, we + * need to set PCR.SOURCE before enabling the preview engine. + */ + if (prev->input == PREVIEW_INPUT_MEMORY) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SOURCE); + + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_EN | ISPPRV_PCR_ONESHOT); +} + +void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev) +{ + /* + * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun + * condition, the module was paused and now we have a buffer queued + * on the output again. Restart the pipeline if running in continuous + * mode. + */ + if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS && + prev->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) { + preview_enable_oneshot(prev); + isp_video_dmaqueue_flags_clr(&prev->video_out); + } +} + +static void preview_isr_buffer(struct isp_prev_device *prev) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity); + struct isp_buffer *buffer; + int restart = 0; + + if (prev->input == PREVIEW_INPUT_MEMORY) { + buffer = omap3isp_video_buffer_next(&prev->video_in); + if (buffer != NULL) + preview_set_inaddr(prev, buffer->isp_addr); + pipe->state |= ISP_PIPELINE_IDLE_INPUT; + } + + if (prev->output & PREVIEW_OUTPUT_MEMORY) { + buffer = omap3isp_video_buffer_next(&prev->video_out); + if (buffer != NULL) { + preview_set_outaddr(prev, buffer->isp_addr); + restart = 1; + } + pipe->state |= ISP_PIPELINE_IDLE_OUTPUT; + } + + switch (prev->state) { + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (isp_pipeline_ready(pipe)) + omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_SINGLESHOT); + break; + + case ISP_PIPELINE_STREAM_CONTINUOUS: + /* If an underrun occurs, the video queue operation handler will + * restart the preview engine. Otherwise restart it immediately. + */ + if (restart) + preview_enable_oneshot(prev); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + default: + return; + } +} + +/* + * omap3isp_preview_isr - ISP preview engine interrupt handler + * + * Manage the preview engine video buffers and configure shadowed registers. + */ +void omap3isp_preview_isr(struct isp_prev_device *prev) +{ + unsigned long flags; + u32 update; + u32 active; + + if (omap3isp_module_sync_is_stopping(&prev->wait, &prev->stopping)) + return; + + spin_lock_irqsave(&prev->params.lock, flags); + preview_params_switch(prev); + update = preview_params_lock(prev, 0, false); + active = prev->params.active; + spin_unlock_irqrestore(&prev->params.lock, flags); + + preview_setup_hw(prev, update, active); + preview_config_input_size(prev, active); + + if (prev->input == PREVIEW_INPUT_MEMORY || + prev->output & PREVIEW_OUTPUT_MEMORY) + preview_isr_buffer(prev); + else if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS) + preview_enable_oneshot(prev); + + spin_lock_irqsave(&prev->params.lock, flags); + preview_params_unlock(prev, update, false); + spin_unlock_irqrestore(&prev->params.lock, flags); +} + +/* ----------------------------------------------------------------------------- + * ISP video operations + */ + +static int preview_video_queue(struct isp_video *video, + struct isp_buffer *buffer) +{ + struct isp_prev_device *prev = &video->isp->isp_prev; + + if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + preview_set_inaddr(prev, buffer->isp_addr); + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + preview_set_outaddr(prev, buffer->isp_addr); + + return 0; +} + +static const struct isp_video_operations preview_video_ops = { + .queue = preview_video_queue, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +/* + * preview_s_ctrl - Handle set control subdev method + * @ctrl: pointer to v4l2 control structure + */ +static int preview_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct isp_prev_device *prev = + container_of(ctrl->handler, struct isp_prev_device, ctrls); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + preview_update_brightness(prev, ctrl->val); + break; + case V4L2_CID_CONTRAST: + preview_update_contrast(prev, ctrl->val); + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops preview_ctrl_ops = { + .s_ctrl = preview_s_ctrl, +}; + +/* + * preview_ioctl - Handle preview module private ioctl's + * @prev: pointer to preview context structure + * @cmd: configuration command + * @arg: configuration argument + * return -EINVAL or zero on success + */ +static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + + switch (cmd) { + case VIDIOC_OMAP3ISP_PRV_CFG: + return preview_config(prev, arg); + + default: + return -ENOIOCTLCMD; + } +} + +/* + * preview_set_stream - Enable/Disable streaming on preview subdev + * @sd : pointer to v4l2 subdev structure + * @enable: 1 == Enable, 0 == Disable + * return -EINVAL or zero on success + */ +static int preview_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct isp_video *video_out = &prev->video_out; + struct isp_device *isp = to_isp_device(prev); + struct device *dev = to_device(prev); + + if (prev->state == ISP_PIPELINE_STREAM_STOPPED) { + if (enable == ISP_PIPELINE_STREAM_STOPPED) + return 0; + + omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_PREVIEW); + preview_configure(prev); + atomic_set(&prev->stopping, 0); + preview_print_status(prev); + } + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (prev->output & PREVIEW_OUTPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE); + + if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED || + !(prev->output & PREVIEW_OUTPUT_MEMORY)) + preview_enable_oneshot(prev); + + isp_video_dmaqueue_flags_clr(video_out); + break; + + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (prev->input == PREVIEW_INPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_READ); + if (prev->output & PREVIEW_OUTPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE); + + preview_enable_oneshot(prev); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + if (omap3isp_module_sync_idle(&sd->entity, &prev->wait, + &prev->stopping)) + dev_dbg(dev, "%s: stop timeout.\n", sd->name); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_READ); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE); + omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_PREVIEW); + isp_video_dmaqueue_flags_clr(video_out); + break; + } + + prev->state = enable; + return 0; +} + +static struct v4l2_mbus_framefmt * +__preview_get_format(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &prev->formats[pad]; +} + +static struct v4l2_rect * +__preview_get_crop(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_crop(fh, PREV_PAD_SINK); + else + return &prev->crop; +} + +/* previewer format descriptions */ +static const unsigned int preview_input_fmts[] = { + V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SGBRG10_1X10, +}; + +static const unsigned int preview_output_fmts[] = { + V4L2_MBUS_FMT_UYVY8_1X16, + V4L2_MBUS_FMT_YUYV8_1X16, +}; + +/* + * preview_try_format - Validate a format + * @prev: ISP preview engine + * @fh: V4L2 subdev file handle + * @pad: pad number + * @fmt: format to be validated + * @which: try/active format selector + * + * Validate and adjust the given format for the given pad based on the preview + * engine limits and the format and crop rectangles on other pads. + */ +static void preview_try_format(struct isp_prev_device *prev, + struct v4l2_subdev_fh *fh, unsigned int pad, + struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + enum v4l2_mbus_pixelcode pixelcode; + struct v4l2_rect *crop; + unsigned int i; + + switch (pad) { + case PREV_PAD_SINK: + /* When reading data from the CCDC, the input size has already + * been mangled by the CCDC output pad so it can be accepted + * as-is. + * + * When reading data from memory, clamp the requested width and + * height. The TRM doesn't specify a minimum input height, make + * sure we got enough lines to enable the noise filter and color + * filter array interpolation. + */ + if (prev->input == PREVIEW_INPUT_MEMORY) { + fmt->width = clamp_t(u32, fmt->width, PREV_MIN_IN_WIDTH, + preview_max_out_width(prev)); + fmt->height = clamp_t(u32, fmt->height, + PREV_MIN_IN_HEIGHT, + PREV_MAX_IN_HEIGHT); + } + + fmt->colorspace = V4L2_COLORSPACE_SRGB; + + for (i = 0; i < ARRAY_SIZE(preview_input_fmts); i++) { + if (fmt->code == preview_input_fmts[i]) + break; + } + + /* If not found, use SGRBG10 as default */ + if (i >= ARRAY_SIZE(preview_input_fmts)) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + break; + + case PREV_PAD_SOURCE: + pixelcode = fmt->code; + *fmt = *__preview_get_format(prev, fh, PREV_PAD_SINK, which); + + switch (pixelcode) { + case V4L2_MBUS_FMT_YUYV8_1X16: + case V4L2_MBUS_FMT_UYVY8_1X16: + fmt->code = pixelcode; + break; + + default: + fmt->code = V4L2_MBUS_FMT_YUYV8_1X16; + break; + } + + /* The preview module output size is configurable through the + * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). This + * is not supported yet, hardcode the output size to the crop + * rectangle size. + */ + crop = __preview_get_crop(prev, fh, which); + fmt->width = crop->width; + fmt->height = crop->height; + + fmt->colorspace = V4L2_COLORSPACE_JPEG; + break; + } + + fmt->field = V4L2_FIELD_NONE; +} + +/* + * preview_try_crop - Validate a crop rectangle + * @prev: ISP preview engine + * @sink: format on the sink pad + * @crop: crop rectangle to be validated + * + * The preview engine crops lines and columns for its internal operation, + * depending on which filters are enabled. Enforce minimum crop margins to + * handle that transparently for userspace. + * + * See the explanation at the PREV_MARGIN_* definitions for more details. + */ +static void preview_try_crop(struct isp_prev_device *prev, + const struct v4l2_mbus_framefmt *sink, + struct v4l2_rect *crop) +{ + unsigned int left = PREV_MARGIN_LEFT; + unsigned int right = sink->width - PREV_MARGIN_RIGHT; + unsigned int top = PREV_MARGIN_TOP; + unsigned int bottom = sink->height - PREV_MARGIN_BOTTOM; + + /* When processing data on-the-fly from the CCDC, at least 2 pixels must + * be cropped from the left and right sides of the image. As we don't + * know which filters will be enabled, increase the left and right + * margins by two. + */ + if (prev->input == PREVIEW_INPUT_CCDC) { + left += 2; + right -= 2; + } + + /* Restrict left/top to even values to keep the Bayer pattern. */ + crop->left &= ~1; + crop->top &= ~1; + + crop->left = clamp_t(u32, crop->left, left, right - PREV_MIN_OUT_WIDTH); + crop->top = clamp_t(u32, crop->top, top, bottom - PREV_MIN_OUT_HEIGHT); + crop->width = clamp_t(u32, crop->width, PREV_MIN_OUT_WIDTH, + right - crop->left); + crop->height = clamp_t(u32, crop->height, PREV_MIN_OUT_HEIGHT, + bottom - crop->top); +} + +/* + * preview_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int preview_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + switch (code->pad) { + case PREV_PAD_SINK: + if (code->index >= ARRAY_SIZE(preview_input_fmts)) + return -EINVAL; + + code->code = preview_input_fmts[code->index]; + break; + case PREV_PAD_SOURCE: + if (code->index >= ARRAY_SIZE(preview_output_fmts)) + return -EINVAL; + + code->code = preview_output_fmts[code->index]; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int preview_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * preview_get_selection - Retrieve a selection rectangle on a pad + * @sd: ISP preview V4L2 subdevice + * @fh: V4L2 subdev file handle + * @sel: Selection rectangle + * + * The only supported rectangles are the crop rectangles on the sink pad. + * + * Return 0 on success or a negative error code otherwise. + */ +static int preview_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + if (sel->pad != PREV_PAD_SINK) + return -EINVAL; + + switch (sel->target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = INT_MAX; + sel->r.height = INT_MAX; + + format = __preview_get_format(prev, fh, PREV_PAD_SINK, + sel->which); + preview_try_crop(prev, format, &sel->r); + break; + + case V4L2_SEL_TGT_CROP: + sel->r = *__preview_get_crop(prev, fh, sel->which); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * preview_set_selection - Set a selection rectangle on a pad + * @sd: ISP preview V4L2 subdevice + * @fh: V4L2 subdev file handle + * @sel: Selection rectangle + * + * The only supported rectangle is the actual crop rectangle on the sink pad. + * + * Return 0 on success or a negative error code otherwise. + */ +static int preview_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + if (sel->target != V4L2_SEL_TGT_CROP || + sel->pad != PREV_PAD_SINK) + return -EINVAL; + + /* The crop rectangle can't be changed while streaming. */ + if (prev->state != ISP_PIPELINE_STREAM_STOPPED) + return -EBUSY; + + /* Modifying the crop rectangle always changes the format on the source + * pad. If the KEEP_CONFIG flag is set, just return the current crop + * rectangle. + */ + if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) { + sel->r = *__preview_get_crop(prev, fh, sel->which); + return 0; + } + + format = __preview_get_format(prev, fh, PREV_PAD_SINK, sel->which); + preview_try_crop(prev, format, &sel->r); + *__preview_get_crop(prev, fh, sel->which) = sel->r; + + /* Update the source format. */ + format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, sel->which); + preview_try_format(prev, fh, PREV_PAD_SOURCE, format, sel->which); + + return 0; +} + +/* + * preview_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __preview_get_format(prev, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * preview_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + format = __preview_get_format(prev, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + preview_try_format(prev, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == PREV_PAD_SINK) { + /* Reset the crop rectangle. */ + crop = __preview_get_crop(prev, fh, fmt->which); + crop->left = 0; + crop->top = 0; + crop->width = fmt->format.width; + crop->height = fmt->format.height; + + preview_try_crop(prev, &fmt->format, crop); + + /* Update the source format. */ + format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, + fmt->which); + preview_try_format(prev, fh, PREV_PAD_SOURCE, format, + fmt->which); + } + + return 0; +} + +/* + * preview_init_formats - Initialize formats on all pads + * @sd: ISP preview V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int preview_init_formats(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = PREV_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + preview_set_format(sd, fh, &format); + + return 0; +} + +/* subdev core operations */ +static const struct v4l2_subdev_core_ops preview_v4l2_core_ops = { + .ioctl = preview_ioctl, +}; + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops preview_v4l2_video_ops = { + .s_stream = preview_set_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = { + .enum_mbus_code = preview_enum_mbus_code, + .enum_frame_size = preview_enum_frame_size, + .get_fmt = preview_get_format, + .set_fmt = preview_set_format, + .get_selection = preview_get_selection, + .set_selection = preview_set_selection, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops preview_v4l2_ops = { + .core = &preview_v4l2_core_ops, + .video = &preview_v4l2_video_ops, + .pad = &preview_v4l2_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops preview_v4l2_internal_ops = { + .open = preview_init_formats, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * preview_link_setup - Setup previewer connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL or zero on success + */ +static int preview_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + + switch (local->index | media_entity_type(remote->entity)) { + case PREV_PAD_SINK | MEDIA_ENT_T_DEVNODE: + /* read from memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->input == PREVIEW_INPUT_CCDC) + return -EBUSY; + prev->input = PREVIEW_INPUT_MEMORY; + } else { + if (prev->input == PREVIEW_INPUT_MEMORY) + prev->input = PREVIEW_INPUT_NONE; + } + break; + + case PREV_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV: + /* read from ccdc */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->input == PREVIEW_INPUT_MEMORY) + return -EBUSY; + prev->input = PREVIEW_INPUT_CCDC; + } else { + if (prev->input == PREVIEW_INPUT_CCDC) + prev->input = PREVIEW_INPUT_NONE; + } + break; + + /* + * The ISP core doesn't support pipelines with multiple video outputs. + * Revisit this when it will be implemented, and return -EBUSY for now. + */ + + case PREV_PAD_SOURCE | MEDIA_ENT_T_DEVNODE: + /* write to memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->output & ~PREVIEW_OUTPUT_MEMORY) + return -EBUSY; + prev->output |= PREVIEW_OUTPUT_MEMORY; + } else { + prev->output &= ~PREVIEW_OUTPUT_MEMORY; + } + break; + + case PREV_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: + /* write to resizer */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->output & ~PREVIEW_OUTPUT_RESIZER) + return -EBUSY; + prev->output |= PREVIEW_OUTPUT_RESIZER; + } else { + prev->output &= ~PREVIEW_OUTPUT_RESIZER; + } + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* media operations */ +static const struct media_entity_operations preview_media_ops = { + .link_setup = preview_link_setup, + .link_validate = v4l2_subdev_link_validate, +}; + +void omap3isp_preview_unregister_entities(struct isp_prev_device *prev) +{ + v4l2_device_unregister_subdev(&prev->subdev); + omap3isp_video_unregister(&prev->video_in); + omap3isp_video_unregister(&prev->video_out); +} + +int omap3isp_preview_register_entities(struct isp_prev_device *prev, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &prev->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&prev->video_in, vdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&prev->video_out, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_preview_unregister_entities(prev); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP previewer initialisation and cleanup + */ + +/* + * preview_init_entities - Initialize subdev and media entity. + * @prev : Pointer to preview structure + * return -ENOMEM or zero on success + */ +static int preview_init_entities(struct isp_prev_device *prev) +{ + struct v4l2_subdev *sd = &prev->subdev; + struct media_pad *pads = prev->pads; + struct media_entity *me = &sd->entity; + int ret; + + prev->input = PREVIEW_INPUT_NONE; + + v4l2_subdev_init(sd, &preview_v4l2_ops); + sd->internal_ops = &preview_v4l2_internal_ops; + strlcpy(sd->name, "OMAP3 ISP preview", sizeof(sd->name)); + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, prev); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + v4l2_ctrl_handler_init(&prev->ctrls, 2); + v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_BRIGHTNESS, + ISPPRV_BRIGHT_LOW, ISPPRV_BRIGHT_HIGH, + ISPPRV_BRIGHT_STEP, ISPPRV_BRIGHT_DEF); + v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_CONTRAST, + ISPPRV_CONTRAST_LOW, ISPPRV_CONTRAST_HIGH, + ISPPRV_CONTRAST_STEP, ISPPRV_CONTRAST_DEF); + v4l2_ctrl_handler_setup(&prev->ctrls); + sd->ctrl_handler = &prev->ctrls; + + pads[PREV_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + me->ops = &preview_media_ops; + ret = media_entity_init(me, PREV_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + preview_init_formats(sd, NULL); + + /* According to the OMAP34xx TRM, video buffers need to be aligned on a + * 32 bytes boundary. However, an undocumented hardware bug requires a + * 64 bytes boundary at the preview engine input. + */ + prev->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + prev->video_in.ops = &preview_video_ops; + prev->video_in.isp = to_isp_device(prev); + prev->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3; + prev->video_in.bpl_alignment = 64; + prev->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + prev->video_out.ops = &preview_video_ops; + prev->video_out.isp = to_isp_device(prev); + prev->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3; + prev->video_out.bpl_alignment = 32; + + ret = omap3isp_video_init(&prev->video_in, "preview"); + if (ret < 0) + goto error_video_in; + + ret = omap3isp_video_init(&prev->video_out, "preview"); + if (ret < 0) + goto error_video_out; + + /* Connect the video nodes to the previewer subdev. */ + ret = media_entity_create_link(&prev->video_in.video.entity, 0, + &prev->subdev.entity, PREV_PAD_SINK, 0); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE, + &prev->video_out.video.entity, 0, 0); + if (ret < 0) + goto error_link; + + return 0; + +error_link: + omap3isp_video_cleanup(&prev->video_out); +error_video_out: + omap3isp_video_cleanup(&prev->video_in); +error_video_in: + media_entity_cleanup(&prev->subdev.entity); + return ret; +} + +/* + * omap3isp_preview_init - Previewer initialization. + * @dev : Pointer to ISP device + * return -ENOMEM or zero on success + */ +int omap3isp_preview_init(struct isp_device *isp) +{ + struct isp_prev_device *prev = &isp->isp_prev; + + init_waitqueue_head(&prev->wait); + + preview_init_params(prev); + + return preview_init_entities(prev); +} + +void omap3isp_preview_cleanup(struct isp_device *isp) +{ + struct isp_prev_device *prev = &isp->isp_prev; + + v4l2_ctrl_handler_free(&prev->ctrls); + omap3isp_video_cleanup(&prev->video_in); + omap3isp_video_cleanup(&prev->video_out); + media_entity_cleanup(&prev->subdev.entity); +} |