diff options
Diffstat (limited to 'drivers/media/platform/davinci')
23 files changed, 18454 insertions, 0 deletions
diff --git a/drivers/media/platform/davinci/Kconfig b/drivers/media/platform/davinci/Kconfig new file mode 100644 index 00000000000..52c5ca68cb3 --- /dev/null +++ b/drivers/media/platform/davinci/Kconfig @@ -0,0 +1,121 @@ +config VIDEO_DAVINCI_VPIF_DISPLAY + tristate "DM646x/DA850/OMAPL138 EVM Video Display" + depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM) + select VIDEOBUF2_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_THS7303 if VIDEO_HELPER_CHIPS_AUTO + help + Enables Davinci VPIF module used for display devices. + This module is common for following DM6467/DA850/OMAPL138 + based display devices. + + To compile this driver as a module, choose M here: the + module will be called vpif_display. + +config VIDEO_DAVINCI_VPIF_CAPTURE + tristate "DM646x/DA850/OMAPL138 EVM Video Capture" + depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM) + select VIDEOBUF2_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + help + Enables Davinci VPIF module used for captur devices. + This module is common for following DM6467/DA850/OMAPL138 + based capture devices. + + To compile this driver as a module, choose M here: the + module will be called vpif_capture. + +config VIDEO_DAVINCI_VPIF + tristate "DaVinci VPIF Driver" + depends on VIDEO_DAVINCI_VPIF_DISPLAY || VIDEO_DAVINCI_VPIF_CAPTURE + help + Support for DaVinci VPIF Driver. + + To compile this driver as a module, choose M here: the + module will be called vpif. + +config VIDEO_VPSS_SYSTEM + tristate "VPSS System module driver" + depends on ARCH_DAVINCI + help + Support for vpss system module for video driver + +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3) + depends on I2C + select VIDEOBUF_DMA_CONTIG + help + Support for DMx/AMx VPFE based frame grabber. This is the + common V4L2 module for following DMx/AMx SoCs from Texas + Instruments:- DM6446, DM365, DM355 & AM3517/05. + + To compile this driver as a module, choose M here: the + module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate "DM6446 CCDC HW module" + depends on VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_ISIF + tristate "ISIF HW module" + depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables ISIF hw module. This is the hardware module for + configuring ISIF in VPFE to capture Raw Bayer RGB data from + a image sensor or YUV data from a YUV source. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM644X_VPBE + tristate "DM644X VPBE HW module" + depends on ARCH_DAVINCI_DM644x + select VIDEO_VPSS_SYSTEM + select VIDEOBUF_DMA_CONTIG + help + Enables VPBE modules used for display on a DM644x + SoC. + + To compile this driver as a module, choose M here: the + module will be called vpbe. + + +config VIDEO_VPBE_DISPLAY + tristate "VPBE V4L2 Display driver" + depends on ARCH_DAVINCI_DM644x + select VIDEO_DM644X_VPBE + help + Enables VPBE V4L2 Display driver on a DM644x device + + To compile this driver as a module, choose M here: the + module will be called vpbe_display. diff --git a/drivers/media/platform/davinci/Makefile b/drivers/media/platform/davinci/Makefile new file mode 100644 index 00000000000..74ed92d0925 --- /dev/null +++ b/drivers/media/platform/davinci/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for the davinci video device drivers. +# + +# VPIF +obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o + +#VPIF Display driver +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif_display.o +#VPIF Capture driver +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif_capture.o + +# Capture: DM6446 and DM355 +obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o +obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o +obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o +obj-$(CONFIG_VIDEO_ISIF) += isif.o +obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o +obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o diff --git a/drivers/media/platform/davinci/ccdc_hw_device.h b/drivers/media/platform/davinci/ccdc_hw_device.h new file mode 100644 index 00000000000..86b9b351896 --- /dev/null +++ b/drivers/media/platform/davinci/ccdc_hw_device.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ccdc device API + */ +#ifndef _CCDC_HW_DEVICE_H +#define _CCDC_HW_DEVICE_H + +#ifdef __KERNEL__ +#include <linux/videodev2.h> +#include <linux/device.h> +#include <media/davinci/vpfe_types.h> +#include <media/davinci/ccdc_types.h> + +/* + * ccdc hw operations + */ +struct ccdc_hw_ops { + /* Pointer to initialize function to initialize ccdc device */ + int (*open) (struct device *dev); + /* Pointer to deinitialize function */ + int (*close) (struct device *dev); + /* set ccdc base address */ + void (*set_ccdc_base)(void *base, int size); + /* Pointer to function to enable or disable ccdc */ + void (*enable) (int en); + /* reset sbl. only for 6446 */ + void (*reset) (void); + /* enable output to sdram */ + void (*enable_out_to_sdram) (int en); + /* Pointer to function to set hw parameters */ + int (*set_hw_if_params) (struct vpfe_hw_if_param *param); + /* get interface parameters */ + int (*get_hw_if_params) (struct vpfe_hw_if_param *param); + /* + * Pointer to function to set parameters. Used + * for implementing VPFE_S_CCDC_PARAMS + */ + int (*set_params) (void *params); + /* + * Pointer to function to get parameter. Used + * for implementing VPFE_G_CCDC_PARAMS + */ + int (*get_params) (void *params); + /* Pointer to function to configure ccdc */ + int (*configure) (void); + + /* Pointer to function to set buffer type */ + int (*set_buftype) (enum ccdc_buftype buf_type); + /* Pointer to function to get buffer type */ + enum ccdc_buftype (*get_buftype) (void); + /* Pointer to function to set frame format */ + int (*set_frame_format) (enum ccdc_frmfmt frm_fmt); + /* Pointer to function to get frame format */ + enum ccdc_frmfmt (*get_frame_format) (void); + /* enumerate hw pix formats */ + int (*enum_pix)(u32 *hw_pix, int i); + /* Pointer to function to set buffer type */ + u32 (*get_pixel_format) (void); + /* Pointer to function to get pixel format. */ + int (*set_pixel_format) (u32 pixfmt); + /* Pointer to function to set image window */ + int (*set_image_window) (struct v4l2_rect *win); + /* Pointer to function to set image window */ + void (*get_image_window) (struct v4l2_rect *win); + /* Pointer to function to get line length */ + unsigned int (*get_line_length) (void); + + /* Query CCDC control IDs */ + int (*queryctrl)(struct v4l2_queryctrl *qctrl); + /* Set CCDC control */ + int (*set_control)(struct v4l2_control *ctrl); + /* Get CCDC control */ + int (*get_control)(struct v4l2_control *ctrl); + + /* Pointer to function to set frame buffer address */ + void (*setfbaddr) (unsigned long addr); + /* Pointer to function to get field id */ + int (*getfid) (void); +}; + +struct ccdc_hw_device { + /* ccdc device name */ + char name[32]; + /* module owner */ + struct module *owner; + /* hw ops */ + struct ccdc_hw_ops hw_ops; +}; + +/* Used by CCDC module to register & unregister with vpfe capture driver */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev); +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev); + +#endif +#endif diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c new file mode 100644 index 00000000000..ce0e4131c06 --- /dev/null +++ b/drivers/media/platform/davinci/dm355_ccdc.c @@ -0,0 +1,1072 @@ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * CCDC hardware module for DM355 + * ------------------------------ + * + * This module is for configuring DM355 CCD controller of VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Bayer RGB data, before writing it to SDRAM. This + * module also allows application to configure individual + * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL. + * To do so, application include dm355_ccdc.h and vpfe_capture.h header + * files. The setparams() API is called by vpfe_capture driver + * to configure module parameters + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Split module parameter structure to module specific ioctl structs + * 3) add support for lense shading correction + * 4) investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/module.h> + +#include <media/davinci/dm355_ccdc.h> +#include <media/davinci/vpss.h> + +#include "dm355_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM355"); +MODULE_AUTHOR("Texas Instruments"); + +static struct ccdc_oper_config { + struct device *dev; + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* Master clock */ + struct clk *mclk; + /* slave clock */ + struct clk *sclk; + /* ccdc base address */ + void __iomem *base_addr; +} ccdc_cfg = { + /* Raw configurations */ + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = 256, + .gb_g = 256, + .gr_cy = 256, + .b_mg = 256 + }, + .config_params = { + .datasft = 2, + .mfilt1 = CCDC_NO_MEDIAN_FILTER1, + .mfilt2 = CCDC_NO_MEDIAN_FILTER2, + .alaw = { + .gama_wd = 2, + }, + .blk_clamp = { + .sample_pixel = 1, + .dc_sub = 25 + }, + .col_pat_field0 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + .col_pat_field1 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + }, + }, + /* YCbCr configuration */ + .ycbcr = { + .win = CCDC_WIN_PAL, + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED + }, +}; + + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_cfg.base_addr + offset); +} + +static void ccdc_enable(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~CCDC_SYNCEN_VDHDEN_MASK); + temp |= (en & CCDC_SYNCEN_VDHDEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_enable_output_to_sdram(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~(CCDC_SYNCEN_WEN_MASK)); + temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_config_gain_offset(void) +{ + /* configure gain */ + regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN); + regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN); + regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN); + regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN); + /* configure offset */ + regw(ccdc_cfg.bayer.ccdc_offset, OFFSET); +} + +/* + * ccdc_restore_defaults() + * This function restore power on defaults in the ccdc registers + */ +static int ccdc_restore_defaults(void) +{ + int i; + + dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults..."); + /* set all registers to zero */ + for (i = 0; i <= CCDC_REG_LAST; i += 4) + regw(0, i); + + /* now override the values with power on defaults in registers */ + regw(MODESET_DEFAULT, MODESET); + /* no culling support */ + regw(CULH_DEFAULT, CULH); + regw(CULV_DEFAULT, CULV); + /* Set default Gain and Offset */ + ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT; + ccdc_config_gain_offset(); + regw(OUTCLIP_DEFAULT, OUTCLIP); + regw(LSCCFG2_DEFAULT, LSCCFG2); + /* select ccdc input */ + if (vpss_select_ccdc_source(VPSS_CCDCIN)) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source"); + return -EFAULT; + } + /* select ccdc clock */ + if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock"); + return -EFAULT; + } + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults..."); + return 0; +} + +static int ccdc_open(struct device *device) +{ + return ccdc_restore_defaults(); +} + +static int ccdc_close(struct device *device) +{ + /* disable clock */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 0); + /* do nothing for now */ + return 0; +} +/* + * ccdc_setwin() + * This function will configure the window size to + * be capture in CCDC reg. + */ +static void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); + + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start, SPH); + regw(horz_nr_pixels, NPH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 and VDINT1 */ + regw(vert_start, VDINT0); + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(vert_start, VDINT0); + regw(mid_img, VDINT1); + } + regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0); + regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); +} + +static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) +{ + if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT || + ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) { + dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 || + ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) { + dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 || + ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) { + dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n"); + return -EINVAL; + } + + if ((ccdcparam->med_filt_thres < 0) || + (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of median filter threshold\n"); + return -EINVAL; + } + + if (ccdcparam->data_sz < CCDC_DATA_16BITS || + ccdcparam->data_sz > CCDC_DATA_8BITS) { + dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n"); + return -EINVAL; + } + + if (ccdcparam->alaw.enable) { + if (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_13_4 || + ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) { + dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n"); + return -EINVAL; + } + } + + if (ccdcparam->blk_clamp.b_clamp_enable) { + if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS || + ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of sample pixel\n"); + return -EINVAL; + } + if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES || + ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of sample lines\n"); + return -EINVAL; + } + } + return 0; +} + +/* Parameter operations */ +static int ccdc_set_params(void __user *params) +{ + struct ccdc_config_params_raw ccdc_raw_params; + int x; + + /* only raw module parameters can be set through the IOCTL */ + if (ccdc_cfg.if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); + if (x) { + dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc" + "params, %d\n", x); + return -EFAULT; + } + + if (!validate_ccdc_param(&ccdc_raw_params)) { + memcpy(&ccdc_cfg.bayer.config_params, + &ccdc_raw_params, + sizeof(ccdc_raw_params)); + return 0; + } + return -EINVAL; +} + +/* This function will configure CCDC for YCbCr video capture */ +static void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; + u32 temp; + + /* first set the CCDC power on defaults values in all registers */ + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); + ccdc_restore_defaults(); + + /* configure pixel format & video frame format */ + temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) << + CCDC_INPUT_MODE_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << + CCDC_FRM_FMT_SHIFT)); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, REC656IF); + /* + * configure the FID, VD, HD pin polarity fld,hd pol positive, + * vd negative, 8-bit pack mode + */ + temp |= CCDC_VD_POL_NEGATIVE; + } else { /* y/c external sync mode */ + temp |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + + /* pack the data to 8-bit */ + temp |= CCDC_DATA_PACK_ENABLE; + + regw(temp, MODESET); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* configure the order of y cb cr in SD-RAM */ + temp = (params->pix_order << CCDC_Y8POS_SHIFT); + temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC; + regw(temp, CCDCFG); + + /* + * configure the horizontal line offset. This is done by rounding up + * width to a multiple of 16 pixels and multiply by two to account for + * y:cb:cr 4:2:2 data + */ + regw(((params->win.width * 2 + 31) >> 5), HSIZE); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST); + } + + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +/* + * ccdc_config_black_clamp() + * configure parameters for Optical Black Clamp + */ +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->b_clamp_enable) { + /* configure DCSub */ + regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB); + regw(0x0000, CLAMP); + return; + } + /* Enable the Black clamping, set sample lines and pixels */ + val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE; + regw(val, CLAMP); + + /* If Black clamping is enable then make dcsub 0 */ + val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK) + << CCDC_NUM_LINE_CALC_SHIFT; + regw(val, DCSUB); +} + +/* + * ccdc_config_black_compense() + * configure parameters for Black Compensation + */ +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = (bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT); + regw(val, BLKCMP1); + + val = ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT); + regw(val, BLKCMP0); +} + +/* + * ccdc_write_dfc_entry() + * write an entry in the dfc table. + */ +int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) +{ +/* TODO This is to be re-visited and adjusted */ +#define DFC_WRITE_WAIT_COUNT 1000 + u32 val, count = DFC_WRITE_WAIT_COUNT; + + regw(dfc->dft_corr_vert[index], DFCMEM0); + regw(dfc->dft_corr_horz[index], DFCMEM1); + regw(dfc->dft_corr_sub1[index], DFCMEM2); + regw(dfc->dft_corr_sub2[index], DFCMEM3); + regw(dfc->dft_corr_sub3[index], DFCMEM4); + /* set WR bit to write */ + val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK; + regw(val, DFCMEMCTL); + + /* + * Assume, it is very short. If we get an error, we need to + * adjust this value + */ + while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK) + count--; + /* + * TODO We expect the count to be non-zero to be successful. Adjust + * the count if write requires more time + */ + + if (count) { + dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n"); + return -1; + } + return 0; +} + +/* + * ccdc_config_vdfc() + * configure parameters for Vertical Defect Correction + */ +static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc) +{ + u32 val; + int i; + + /* Configure General Defect Correction. The table used is from IPIPE */ + val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK; + + /* Configure Vertical Defect Correction if needed */ + if (!dfc->ver_dft_en) { + /* Enable only General Defect Correction */ + regw(val, DFCCTL); + return 0; + } + + if (dfc->table_size > CCDC_DFT_TABLE_SIZE) + return -EINVAL; + + val |= CCDC_DFCCTL_VDFC_DISABLE; + val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) << + CCDC_DFCCTL_VDFCSL_SHIFT; + val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) << + CCDC_DFCCTL_VDFCUDA_SHIFT; + val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) << + CCDC_DFCCTL_VDFLSFT_SHIFT; + regw(val , DFCCTL); + + /* clear address ptr to offset 0 */ + val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT; + + /* write defect table entries */ + for (i = 0; i < dfc->table_size; i++) { + /* increment address for non zero index */ + if (i != 0) + val = CCDC_DFCMEMCTL_INC_ADDR; + regw(val, DFCMEMCTL); + if (ccdc_write_dfc_entry(i, dfc) < 0) + return -EFAULT; + } + + /* update saturation level and enable dfc */ + regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT); + val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK << + CCDC_DFCCTL_VDFCEN_SHIFT); + regw(val, DFCCTL); + return 0; +} + +/* + * ccdc_config_csc() + * configure parameters for color space conversion + * Each register CSCM0-7 has two values in S8Q5 format. + */ +static void ccdc_config_csc(struct ccdc_csc *csc) +{ + u32 val1, val2; + int i; + + if (!csc->enable) + return; + + /* Enable the CSC sub-module */ + regw(CCDC_CSC_ENABLE, CSCCTL); + + /* Converting the co-eff as per the format of the register */ + for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + /* + * convert decimal part to binary. Use 2 decimal + * precision, user values range from .00 - 0.99 + */ + val1 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + } else { + + /* CSCM - MSB */ + val2 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + val2 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + val2 <<= CCDC_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } +} + +/* + * ccdc_config_color_patterns() + * configure parameters for color patterns + */ +static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0, + struct ccdc_col_pat *pat1) +{ + u32 val; + + val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) | + (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) | + (pat1->elop << 12) | (pat1->elep << 14)); + regw(val, COLPTN); +} + +/* This function will configure CCDC for Raw mode image capture */ +static int ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_cfg.bayer; + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int val; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); + + /* restore power on defaults to register */ + ccdc_restore_defaults(); + + /* CCDCFG register: + * set CCD Not to swap input since input is RAW data + * set FID detection function to Latch at V-Sync + * set WENLOG - ccdc valid area to AND + * set TRGSEL to WENBIT + * set EXTRG to DISABLE + * disable latching function on VSYNC - shadowed registers + */ + regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC | + CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN | + CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG); + + /* + * Set VDHD direction to input, input type to raw input + * normal data polarity, do not use external WEN + */ + val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL | + CCDC_EXWEN_DISABLE); + + /* + * Configure the vertical sync polarity (MODESET.VDPOL), horizontal + * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL), + * frame format(progressive or interlace), & pixel format (Input mode) + */ + val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT)); + + /* set pack for alaw compression */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + val |= CCDC_DATA_PACK_ENABLE; + + /* Configure for LPF */ + if (config_params->lpf_enable) + val |= (config_params->lpf_enable & CCDC_LPF_MASK) << + CCDC_LPF_SHIFT; + + /* Configure the data shift */ + val |= (config_params->datasft & CCDC_DATASFT_MASK) << + CCDC_DATASFT_SHIFT; + regw(val , MODESET); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val); + + /* Configure the Median Filter threshold */ + regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT); + + /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */ + val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT | + CCDC_CFA_MOSAIC; + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val |= (CCDC_ALAW_ENABLE | + ((config_params->alaw.gama_wd & + CCDC_ALAW_GAMA_WD_MASK) << + CCDC_GAMMAWD_INPUT_SHIFT)); + } + + /* Configure Median filter1 & filter2 */ + val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) | + (config_params->mfilt2 << CCDC_MFILT2_SHIFT)); + + regw(val, GAMMAWD); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 1); + + /* Optical Clamp Averaging */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* Vertical Defect Correction if needed */ + if (ccdc_config_vdfc(&config_params->vertical_dft) < 0) + return -EFAULT; + + /* color space conversion */ + ccdc_config_csc(&config_params->csc); + + /* color pattern */ + ccdc_config_color_patterns(&config_params->col_pat_field0, + &config_params->col_pat_field1); + + /* Configure the Gain & offset control */ + ccdc_config_gain_offset(); + + dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val); + + /* Configure DATAOFST register */ + val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_H_SHIFT; + val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_V_SHIFT; + regw(val, DATAOFST); + + /* configuring HSIZE register */ + val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) << + CCDC_HSIZE_FLIP_SHIFT; + + /* If pack 8 is enable then 1 pixel will take 1 byte */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) { + val |= (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + /* adjust to multiple of 32 */ + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } else { + /* else one pixel will take 2 byte */ + val |= (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } + regw(val, HSIZE); + + /* Configure SDOFST register */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For interlace inverse mode */ + regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_INVERSE); + } else { + /* For interlace non inverse mode */ + regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_NORMAL); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + if (params->image_invert_enable) { + /* For progessive inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_INVERSE); + } else { + /* For progessive non inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_NORMAL); + } + } + dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); + return 0; +} + +static int ccdc_configure(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.buf_type = buf_type; + else + ccdc_cfg.ycbcr.buf_type = buf_type; + return 0; +} +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.buf_type; + return ccdc_cfg.ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + alaw->enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + u32 pixfmt; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.win = *win; + else + ccdc_cfg.ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + *win = ccdc_cfg.bayer.win; + else + *win = ccdc_cfg.ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int len; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_cfg.bayer.win.width; + else + len = ccdc_cfg.bayer.win.width * 2; + } else + len = ccdc_cfg.ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.frm_fmt = frm_fmt; + else + ccdc_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.frm_fmt; + else + return ccdc_cfg.ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(MODESET) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw((addr >> 21) & 0x007f, STADRH); + regw((addr >> 5) & 0x0ffff, STADRL); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + ccdc_cfg.ycbcr.vd_pol = params->vdpol; + ccdc_cfg.ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM355 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .enable = ccdc_enable, + .enable_out_to_sdram = ccdc_enable_output_to_sdram, + .set_hw_if_params = ccdc_set_hw_if_params, + .set_params = ccdc_set_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int __devinit dm355_ccdc_probe(struct platform_device *pdev) +{ + void (*setup_pinmux)(void); + struct resource *res; + int status = 0; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&ccdc_hw_dev); + if (status < 0) + return status; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + status = -ENODEV; + goto fail_nores; + } + + res = request_mem_region(res->start, resource_size(res), res->name); + if (!res) { + status = -EBUSY; + goto fail_nores; + } + + ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res)); + if (!ccdc_cfg.base_addr) { + status = -ENOMEM; + goto fail_nomem; + } + + /* Get and enable Master clock */ + ccdc_cfg.mclk = clk_get(&pdev->dev, "master"); + if (IS_ERR(ccdc_cfg.mclk)) { + status = PTR_ERR(ccdc_cfg.mclk); + goto fail_nomap; + } + if (clk_enable(ccdc_cfg.mclk)) { + status = -ENODEV; + goto fail_mclk; + } + + /* Get and enable Slave clock */ + ccdc_cfg.sclk = clk_get(&pdev->dev, "slave"); + if (IS_ERR(ccdc_cfg.sclk)) { + status = PTR_ERR(ccdc_cfg.sclk); + goto fail_mclk; + } + if (clk_enable(ccdc_cfg.sclk)) { + status = -ENODEV; + goto fail_sclk; + } + + /* Platform data holds setup_pinmux function ptr */ + if (NULL == pdev->dev.platform_data) { + status = -ENODEV; + goto fail_sclk; + } + setup_pinmux = pdev->dev.platform_data; + /* + * setup Mux configuration for ccdc which may be different for + * different SoCs using this CCDC + */ + setup_pinmux(); + ccdc_cfg.dev = &pdev->dev; + printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); + return 0; +fail_sclk: + clk_put(ccdc_cfg.sclk); +fail_mclk: + clk_put(ccdc_cfg.mclk); +fail_nomap: + iounmap(ccdc_cfg.base_addr); +fail_nomem: + release_mem_region(res->start, resource_size(res)); +fail_nores: + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return status; +} + +static int dm355_ccdc_remove(struct platform_device *pdev) +{ + struct resource *res; + + clk_put(ccdc_cfg.mclk); + clk_put(ccdc_cfg.sclk); + iounmap(ccdc_cfg.base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, resource_size(res)); + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return 0; +} + +static struct platform_driver dm355_ccdc_driver = { + .driver = { + .name = "dm355_ccdc", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(dm355_ccdc_remove), + .probe = dm355_ccdc_probe, +}; + +module_platform_driver(dm355_ccdc_driver); diff --git a/drivers/media/platform/davinci/dm355_ccdc_regs.h b/drivers/media/platform/davinci/dm355_ccdc_regs.h new file mode 100644 index 00000000000..d6d2ef0533b --- /dev/null +++ b/drivers/media/platform/davinci/dm355_ccdc_regs.h @@ -0,0 +1,310 @@ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _DM355_CCDC_REGS_H +#define _DM355_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define SYNCEN 0x00 +#define MODESET 0x04 +#define HDWIDTH 0x08 +#define VDWIDTH 0x0c +#define PPLN 0x10 +#define LPFR 0x14 +#define SPH 0x18 +#define NPH 0x1c +#define SLV0 0x20 +#define SLV1 0x24 +#define NLV 0x28 +#define CULH 0x2c +#define CULV 0x30 +#define HSIZE 0x34 +#define SDOFST 0x38 +#define STADRH 0x3c +#define STADRL 0x40 +#define CLAMP 0x44 +#define DCSUB 0x48 +#define COLPTN 0x4c +#define BLKCMP0 0x50 +#define BLKCMP1 0x54 +#define MEDFILT 0x58 +#define RYEGAIN 0x5c +#define GRCYGAIN 0x60 +#define GBGGAIN 0x64 +#define BMGGAIN 0x68 +#define OFFSET 0x6c +#define OUTCLIP 0x70 +#define VDINT0 0x74 +#define VDINT1 0x78 +#define RSV0 0x7c +#define GAMMAWD 0x80 +#define REC656IF 0x84 +#define CCDCFG 0x88 +#define FMTCFG 0x8c +#define FMTPLEN 0x90 +#define FMTSPH 0x94 +#define FMTLNH 0x98 +#define FMTSLV 0x9c +#define FMTLNV 0xa0 +#define FMTRLEN 0xa4 +#define FMTHCNT 0xa8 +#define FMT_ADDR_PTR_B 0xac +#define FMT_ADDR_PTR(i) (FMT_ADDR_PTR_B + (i * 4)) +#define FMTPGM_VF0 0xcc +#define FMTPGM_VF1 0xd0 +#define FMTPGM_AP0 0xd4 +#define FMTPGM_AP1 0xd8 +#define FMTPGM_AP2 0xdc +#define FMTPGM_AP3 0xe0 +#define FMTPGM_AP4 0xe4 +#define FMTPGM_AP5 0xe8 +#define FMTPGM_AP6 0xec +#define FMTPGM_AP7 0xf0 +#define LSCCFG1 0xf4 +#define LSCCFG2 0xf8 +#define LSCH0 0xfc +#define LSCV0 0x100 +#define LSCKH 0x104 +#define LSCKV 0x108 +#define LSCMEMCTL 0x10c +#define LSCMEMD 0x110 +#define LSCMEMQ 0x114 +#define DFCCTL 0x118 +#define DFCVSAT 0x11c +#define DFCMEMCTL 0x120 +#define DFCMEM0 0x124 +#define DFCMEM1 0x128 +#define DFCMEM2 0x12c +#define DFCMEM3 0x130 +#define DFCMEM4 0x134 +#define CSCCTL 0x138 +#define CSCM0 0x13c +#define CSCM1 0x140 +#define CSCM2 0x144 +#define CSCM3 0x148 +#define CSCM4 0x14c +#define CSCM5 0x150 +#define CSCM6 0x154 +#define CSCM7 0x158 +#define DATAOFST 0x15c +#define CCDC_REG_LAST DATAOFST +/************************************************************** +* Define for various register bit mask and shifts for CCDC +* +**************************************************************/ +#define CCDC_RAW_IP_MODE 0 +#define CCDC_VDHDOUT_INPUT 0 +#define CCDC_YCINSWP_RAW (0 << 4) +#define CCDC_EXWEN_DISABLE 0 +#define CCDC_DATAPOL_NORMAL 0 +#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC 0 +#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC (1 << 6) +#define CCDC_CCDCFG_WENLOG_AND 0 +#define CCDC_CCDCFG_TRGSEL_WEN 0 +#define CCDC_CCDCFG_EXTRG_DISABLE 0 +#define CCDC_CFA_MOSAIC 0 +#define CCDC_Y8POS_SHIFT 11 + +#define CCDC_VDC_DFCVSAT_MASK 0x3fff +#define CCDC_DATAOFST_MASK 0x0ff +#define CCDC_DATAOFST_H_SHIFT 0 +#define CCDC_DATAOFST_V_SHIFT 8 +#define CCDC_GAMMAWD_CFA_MASK 1 +#define CCDC_GAMMAWD_CFA_SHIFT 5 +#define CCDC_GAMMAWD_INPUT_SHIFT 2 +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_VD_POL_NEGATIVE (1 << 2) +#define CCDC_FRM_FMT_MASK 1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_VDHDOUT_MASK 1 +#define CCDC_VDHDOUT_SHIFT 0 +#define CCDC_EXWEN_MASK 1 +#define CCDC_EXWEN_SHIFT 5 +#define CCDC_INPUT_MODE_MASK 3 +#define CCDC_INPUT_MODE_SHIFT 12 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_DATAPOL_MASK 1 +#define CCDC_DATAPOL_SHIFT 6 +#define CCDC_WEN_ENABLE (1 << 1) +#define CCDC_VDHDEN_ENABLE (1 << 16) +#define CCDC_LPF_ENABLE (1 << 14) +#define CCDC_ALAW_ENABLE 1 +#define CCDC_ALAW_GAMA_WD_MASK 7 +#define CCDC_REC656IF_BT656_EN 3 + +#define CCDC_FMTCFG_FMTMODE_MASK 3 +#define CCDC_FMTCFG_FMTMODE_SHIFT 1 +#define CCDC_FMTCFG_LNUM_MASK 3 +#define CCDC_FMTCFG_LNUM_SHIFT 4 +#define CCDC_FMTCFG_ADDRINC_MASK 7 +#define CCDC_FMTCFG_ADDRINC_SHIFT 8 + +#define CCDC_CCDCFG_FIDMD_SHIFT 6 +#define CCDC_CCDCFG_WENLOG_SHIFT 8 +#define CCDC_CCDCFG_TRGSEL_SHIFT 9 +#define CCDC_CCDCFG_EXTRG_SHIFT 10 +#define CCDC_CCDCFG_MSBINVI_SHIFT 13 + +#define CCDC_HSIZE_FLIP_SHIFT 12 +#define CCDC_HSIZE_FLIP_MASK 1 +#define CCDC_HSIZE_VAL_MASK 0xFFF +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_SDOFST_INTERLACE_INVERSE 0x4B6D +#define CCDC_SDOFST_INTERLACE_NORMAL 0x0B6D +#define CCDC_SDOFST_PROGRESSIVE_INVERSE 0x4000 +#define CCDC_SDOFST_PROGRESSIVE_NORMAL 0 +#define CCDC_START_PX_HOR_MASK 0x7FFF +#define CCDC_NUM_PX_HOR_MASK 0x7FFF +#define CCDC_START_VER_ONE_MASK 0x7FFF +#define CCDC_START_VER_TWO_MASK 0x7FFF +#define CCDC_NUM_LINES_VER 0x7FFF + +#define CCDC_BLK_CLAMP_ENABLE (1 << 15) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x1FFF +#define CCDC_BLK_SAMPLE_LN_MASK 3 +#define CCDC_BLK_SAMPLE_LN_SHIFT 13 + +#define CCDC_NUM_LINE_CALC_MASK 3 +#define CCDC_NUM_LINE_CALC_SHIFT 14 + +#define CCDC_BLK_DC_SUB_MASK 0x3FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 0 +#define CCDC_BLK_COMP_R_COMP_SHIFT 8 +#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define CCDC_LATCH_ON_VSYNC_ENABLE (0 << 15) +#define CCDC_FPC_ENABLE (1 << 15) +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE (1 << 11) +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF + +#define CCDC_CSC_COEF_INTEG_MASK 7 +#define CCDC_CSC_COEF_DECIMAL_MASK 0x1f +#define CCDC_CSC_COEF_INTEG_SHIFT 5 +#define CCDC_CSCM_MSB_SHIFT 8 +#define CCDC_CSC_ENABLE 1 +#define CCDC_CSC_DEC_MAX 32 + +#define CCDC_MFILT1_SHIFT 10 +#define CCDC_MFILT2_SHIFT 8 +#define CCDC_MED_FILT_THRESH 0x3FFF +#define CCDC_LPF_MASK 1 +#define CCDC_LPF_SHIFT 14 +#define CCDC_OFFSET_MASK 0x3FF +#define CCDC_DATASFT_MASK 7 +#define CCDC_DATASFT_SHIFT 8 + +#define CCDC_DF_ENABLE 1 + +#define CCDC_FMTPLEN_P0_MASK 0xF +#define CCDC_FMTPLEN_P1_MASK 0xF +#define CCDC_FMTPLEN_P2_MASK 7 +#define CCDC_FMTPLEN_P3_MASK 7 +#define CCDC_FMTPLEN_P0_SHIFT 0 +#define CCDC_FMTPLEN_P1_SHIFT 4 +#define CCDC_FMTPLEN_P2_SHIFT 8 +#define CCDC_FMTPLEN_P3_SHIFT 12 + +#define CCDC_FMTSPH_MASK 0x1FFF +#define CCDC_FMTLNH_MASK 0x1FFF +#define CCDC_FMTSLV_MASK 0x1FFF +#define CCDC_FMTLNV_MASK 0x7FFF +#define CCDC_FMTRLEN_MASK 0x1FFF +#define CCDC_FMTHCNT_MASK 0x1FFF + +#define CCDC_ADP_INIT_MASK 0x1FFF +#define CCDC_ADP_LINE_SHIFT 13 +#define CCDC_ADP_LINE_MASK 3 +#define CCDC_FMTPGN_APTR_MASK 7 + +#define CCDC_DFCCTL_GDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFC_DISABLE (0 << 4) +#define CCDC_DFCCTL_VDFCEN_SHIFT 4 +#define CCDC_DFCCTL_VDFCSL_MASK 3 +#define CCDC_DFCCTL_VDFCSL_SHIFT 5 +#define CCDC_DFCCTL_VDFCUDA_MASK 1 +#define CCDC_DFCCTL_VDFCUDA_SHIFT 7 +#define CCDC_DFCCTL_VDFLSFT_MASK 3 +#define CCDC_DFCCTL_VDFLSFT_SHIFT 8 +#define CCDC_DFCMEMCTL_DFCMARST_MASK 1 +#define CCDC_DFCMEMCTL_DFCMARST_SHIFT 2 +#define CCDC_DFCMEMCTL_DFCMWR_MASK 1 +#define CCDC_DFCMEMCTL_DFCMWR_SHIFT 0 +#define CCDC_DFCMEMCTL_INC_ADDR (0 << 2) + +#define CCDC_LSCCFG_GFTSF_MASK 7 +#define CCDC_LSCCFG_GFTSF_SHIFT 1 +#define CCDC_LSCCFG_GFTINV_MASK 0xf +#define CCDC_LSCCFG_GFTINV_SHIFT 4 +#define CCDC_LSC_GFTABLE_SEL_MASK 3 +#define CCDC_LSC_GFTABLE_EPEL_SHIFT 8 +#define CCDC_LSC_GFTABLE_OPEL_SHIFT 10 +#define CCDC_LSC_GFTABLE_EPOL_SHIFT 12 +#define CCDC_LSC_GFTABLE_OPOL_SHIFT 14 +#define CCDC_LSC_GFMODE_MASK 3 +#define CCDC_LSC_GFMODE_SHIFT 4 +#define CCDC_LSC_DISABLE 0 +#define CCDC_LSC_ENABLE 1 +#define CCDC_LSC_TABLE1_SLC 0 +#define CCDC_LSC_TABLE2_SLC 1 +#define CCDC_LSC_TABLE3_SLC 2 +#define CCDC_LSC_MEMADDR_RESET (1 << 2) +#define CCDC_LSC_MEMADDR_INCR (0 << 2) +#define CCDC_LSC_FRAC_MASK_T1 0xFF +#define CCDC_LSC_INT_MASK 3 +#define CCDC_LSC_FRAC_MASK 0x3FFF +#define CCDC_LSC_CENTRE_MASK 0x3FFF +#define CCDC_LSC_COEF_MASK 0xff +#define CCDC_LSC_COEFL_SHIFT 0 +#define CCDC_LSC_COEFU_SHIFT 8 +#define CCDC_GAIN_MASK 0x7FF +#define CCDC_SYNCEN_VDHDEN_MASK (1 << 0) +#define CCDC_SYNCEN_WEN_MASK (1 << 1) +#define CCDC_SYNCEN_WEN_SHIFT 1 + +/* Power on Defaults in hardware */ +#define MODESET_DEFAULT 0x200 +#define CULH_DEFAULT 0xFFFF +#define CULV_DEFAULT 0xFF +#define GAIN_DEFAULT 256 +#define OUTCLIP_DEFAULT 0x3FFF +#define LSCCFG2_DEFAULT 0xE + +#endif diff --git a/drivers/media/platform/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c new file mode 100644 index 00000000000..ee7942b1996 --- /dev/null +++ b/drivers/media/platform/davinci/dm644x_ccdc.c @@ -0,0 +1,1081 @@ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * CCDC hardware module for DM6446 + * ------------------------------ + * + * This module is for configuring CCD controller of DM6446 VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Raw Bayer RGB data, before writing it to SDRAM. This + * module also allows application to configure individual + * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL. + * To do so, application includes dm644x_ccdc.h and vpfe_capture.h header + * files. The setparams() API is called by vpfe_capture driver + * to configure module parameters. This file is named DM644x so that other + * variants such DM6443 may be supported using the same module. + * + * TODO: Test Raw bayer parameter settings and bayer capture + * Split module parameter structure to module specific ioctl structs + * investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> +#include <linux/gfp.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/module.h> + +#include <media/davinci/dm644x_ccdc.h> +#include <media/davinci/vpss.h> + +#include "dm644x_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM6446"); +MODULE_AUTHOR("Texas Instruments"); + +static struct ccdc_oper_config { + struct device *dev; + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* Master clock */ + struct clk *mclk; + /* slave clock */ + struct clk *sclk; + /* ccdc base address */ + void __iomem *base_addr; +} ccdc_cfg = { + /* Raw configurations */ + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .config_params = { + .data_sz = CCDC_DATA_10BITS, + }, + }, + .ycbcr = { + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .win = CCDC_WIN_PAL, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED + }, +}; + +#define CCDC_MAX_RAW_YUV_FORMATS 2 + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* CCDC Save/Restore context */ +static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)]; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_cfg.base_addr + offset); +} + +static void ccdc_enable(int flag) +{ + regw(flag, CCDC_PCR); +} + +static void ccdc_enable_vport(int flag) +{ + if (flag) + /* enable video port */ + regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG); + else + regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG); +} + +/* + * ccdc_setwin() + * This function will configure the window size + * to be capture in CCDC reg + */ +void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, + int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int val = 0, mid_img = 0; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = (image_win->width << (ppc - 1)) - 1; + regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels, + CCDC_HORZ_INFO); + + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 */ + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT); + regw(val, CCDC_VDINT); + + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* + * configure VDINT0 and VDINT1. VDINT1 will be at half + * of image height + */ + mid_img = vert_start + (image_win->height / 2); + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) | + (mid_img & CCDC_VDINT_VDINT1_MASK); + regw(val, CCDC_VDINT); + + } + regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start, + CCDC_VERT_START); + regw(vert_nr_lines, CCDC_VERT_LINES); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); +} + +static void ccdc_readregs(void) +{ + unsigned int val = 0; + + val = regr(CCDC_ALAW); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val); + val = regr(CCDC_CLAMP); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val); + val = regr(CCDC_DCSUB); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val); + val = regr(CCDC_BLKCMP); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val); + val = regr(CCDC_FPC_ADDR); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val); + val = regr(CCDC_FPC); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val); + val = regr(CCDC_FMTCFG); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val); + val = regr(CCDC_COLPTN); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val); + val = regr(CCDC_FMT_HORZ); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val); + val = regr(CCDC_FMT_VERT); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val); + val = regr(CCDC_HSIZE_OFF); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val); + val = regr(CCDC_SDOFST); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val); + val = regr(CCDC_VP_OUT); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val); + val = regr(CCDC_SYN_MODE); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val); + val = regr(CCDC_HORZ_INFO); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val); + val = regr(CCDC_VERT_START); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val); + val = regr(CCDC_VERT_LINES); + dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val); +} + +static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) +{ + if (ccdcparam->alaw.enable) { + if ((ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) || + (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_15_6) || + (ccdcparam->alaw.gama_wd < ccdcparam->data_sz)) { + dev_dbg(ccdc_cfg.dev, "\nInvalid data line select"); + return -1; + } + } + return 0; +} + +static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int *fpc_virtaddr = NULL; + unsigned int *fpc_physaddr = NULL; + + memcpy(config_params, raw_params, sizeof(*raw_params)); + /* + * allocate memory for fault pixel table and copy the user + * values to the table + */ + if (!config_params->fault_pxl.enable) + return 0; + + fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr; + fpc_virtaddr = (unsigned int *)phys_to_virt( + (unsigned long)fpc_physaddr); + /* + * Allocate memory for FPC table if current + * FPC table buffer is not big enough to + * accommodate FPC Number requested + */ + if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) { + if (fpc_physaddr != NULL) { + free_pages((unsigned long)fpc_physaddr, + get_order + (config_params->fault_pxl.fp_num * + FP_NUM_BYTES)); + } + + /* Allocate memory for FPC table */ + fpc_virtaddr = + (unsigned int *)__get_free_pages(GFP_KERNEL | GFP_DMA, + get_order(raw_params-> + fault_pxl.fp_num * + FP_NUM_BYTES)); + + if (fpc_virtaddr == NULL) { + dev_dbg(ccdc_cfg.dev, + "\nUnable to allocate memory for FPC"); + return -EFAULT; + } + fpc_physaddr = + (unsigned int *)virt_to_phys((void *)fpc_virtaddr); + } + + /* Copy number of fault pixels and FPC table */ + config_params->fault_pxl.fp_num = raw_params->fault_pxl.fp_num; + if (copy_from_user(fpc_virtaddr, + (void __user *)raw_params->fault_pxl.fpc_table_addr, + config_params->fault_pxl.fp_num * FP_NUM_BYTES)) { + dev_dbg(ccdc_cfg.dev, "\n copy_from_user failed"); + return -EFAULT; + } + config_params->fault_pxl.fpc_table_addr = (unsigned int)fpc_physaddr; + return 0; +} + +static int ccdc_close(struct device *dev) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL; + + fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr; + + if (fpc_physaddr != NULL) { + fpc_virtaddr = (unsigned int *) + phys_to_virt((unsigned long)fpc_physaddr); + free_pages((unsigned long)fpc_virtaddr, + get_order(config_params->fault_pxl.fp_num * + FP_NUM_BYTES)); + } + return 0; +} + +/* + * ccdc_restore_defaults() + * This function will write defaults to all CCDC registers + */ +static void ccdc_restore_defaults(void) +{ + int i; + + /* disable CCDC */ + ccdc_enable(0); + /* set all registers to default value */ + for (i = 4; i <= 0x94; i += 4) + regw(0, i); + regw(CCDC_NO_CULLING, CCDC_CULLING); + regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW); +} + +static int ccdc_open(struct device *device) +{ + ccdc_restore_defaults(); + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_enable_vport(1); + return 0; +} + +static void ccdc_sbl_reset(void) +{ + vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O); +} + +/* Parameter operations */ +static int ccdc_set_params(void __user *params) +{ + struct ccdc_config_params_raw ccdc_raw_params; + int x; + + if (ccdc_cfg.if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); + if (x) { + dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying" + "ccdc params, %d\n", x); + return -EFAULT; + } + + if (!validate_ccdc_param(&ccdc_raw_params)) { + if (!ccdc_update_raw_params(&ccdc_raw_params)) + return 0; + } + return -EINVAL; +} + +/* + * ccdc_config_ycbcr() + * This function will configure CCDC for YCbCr video capture + */ +void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; + u32 syn_mode; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); + /* + * first restore the CCDC registers to default values + * This is important since we assume default values to be set in + * a lot of registers that we didn't touch + */ + ccdc_restore_defaults(); + + /* + * configure pixel format, frame format, configure video frame + * format, enable output to SDRAM, enable internal timing generator + * and 8bit pack mode + */ + syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) << + CCDC_SYN_MODE_INPMOD_SHIFT) | + ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) << + CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE | + CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF); + + /* + * configure the FID, VD, HD pin polarity, + * fld,hd pol positive, vd negative, 8-bit data + */ + syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE; + if (ccdc_cfg.if_type == VPFE_BT656_10BIT) + syn_mode |= CCDC_SYN_MODE_10BITS; + else + syn_mode |= CCDC_SYN_MODE_8BITS; + } else { + /* y/c external sync mode */ + syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + regw(syn_mode, CCDC_SYN_MODE); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* + * configure the order of y cb cr in SDRAM, and disable latch + * internal register on vsync + */ + if (ccdc_cfg.if_type == VPFE_BT656_10BIT) + regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | + CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT, + CCDC_CCDCFG); + else + regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | + CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * configure the horizontal line offset. This should be a + * on 32 byte boundary. So clear LSB 5 bits + */ + regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST); + + ccdc_sbl_reset(); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->enable) { + /* configure DCSub */ + val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK; + regw(val, CCDC_DCSUB); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val); + regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n"); + return; + } + /* + * Configure gain, Start pixel, No of line to be avg, + * No of pixel/line to be avg, & Enable the Black clamping + */ + val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) | + ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) << + CCDC_BLK_ST_PXL_SHIFT) | + ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) << + CCDC_BLK_SAMPLE_LINE_SHIFT) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE); + regw(val, CCDC_CLAMP); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val); + /* If Black clamping is enable then make dcsub 0 */ + regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n"); +} + +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = ((bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT) | + ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT)); + regw(val, CCDC_BLKCMP); +} + +static void ccdc_config_fpc(struct ccdc_fault_pixel *fpc) +{ + u32 val; + + /* Initially disable FPC */ + val = CCDC_FPC_DISABLE; + regw(val, CCDC_FPC); + + if (!fpc->enable) + return; + + /* Configure Fault pixel if needed */ + regw(fpc->fpc_table_addr, CCDC_FPC_ADDR); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC_ADDR...\n", + (fpc->fpc_table_addr)); + /* Write the FPC params with FPC disable */ + val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK; + regw(val, CCDC_FPC); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val); + /* read the FPC register */ + val = regr(CCDC_FPC) | CCDC_FPC_ENABLE; + regw(val, CCDC_FPC); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val); +} + +/* + * ccdc_config_raw() + * This function will configure CCDC for Raw capture mode + */ +void ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_cfg.bayer; + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int syn_mode = 0; + unsigned int val; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); + + /* Reset CCDC */ + ccdc_restore_defaults(); + + /* Disable latching function registers on VSYNC */ + regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * Configure the vertical sync polarity(SYN_MODE.VDPOL), + * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity + * (SYN_MODE.FLDPOL), frame format(progressive or interlace), + * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output + * SDRAM, enable internal timing generator + */ + syn_mode = + (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((config_params->data_sz & CCDC_DATA_SZ_MASK) << + CCDC_DATA_SZ_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) | + CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE); + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val = ((config_params->alaw.gama_wd & + CCDC_ALAW_GAMA_WD_MASK) | CCDC_ALAW_ENABLE); + regw(val, CCDC_ALAW); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val); + } + + /* Configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW); + + /* Configure Black Clamp */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Configure Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* Configure Fault Pixel Correction */ + ccdc_config_fpc(&config_params->fault_pxl); + + /* If data size is 8 bit then pack the data */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + syn_mode |= CCDC_DATA_PACK_ENABLE; + +#ifdef CONFIG_DM644X_VIDEO_PORT_ENABLE + /* enable video port */ + val = CCDC_ENABLE_VIDEO_PORT; +#else + /* disable video port */ + val = CCDC_DISABLE_VIDEO_PORT; +#endif + + if (config_params->data_sz == CCDC_DATA_8BITS) + val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + else + val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + /* Write value in FMTCFG */ + regw(val, CCDC_FMTCFG); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val); + /* Configure the color pattern according to mt9t001 sensor */ + regw(CCDC_COLPTN_VAL, CCDC_COLPTN); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n"); + /* + * Configure Data formatter(Video port) pixel selection + * (FMT_HORZ, FMT_VERT) + */ + val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) << + CCDC_FMT_HORZ_FMTSPH_SHIFT) | + (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK); + regw(val, CCDC_FMT_HORZ); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val); + val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK) + << CCDC_FMT_VERT_FMTSLV_SHIFT; + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK; + else + val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK; + + dev_dbg(ccdc_cfg.dev, "\nparams->win.height 0x%x ...\n", + params->win.height); + regw(val, CCDC_FMT_VERT); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val); + + dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)..."); + + /* + * Configure Horizontal offset register. If pack 8 is enabled then + * 1 pixel will take 1 byte + */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) & + CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF); + else + /* else one pixel will take 2 byte */ + regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) + + CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK, + CCDC_HSIZE_OFF); + + /* Set value for SDOFST */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For intelace inverse mode */ + regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n"); + } + + else { + /* For intelace non inverse mode */ + regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n"); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n"); + } + + /* + * Configure video port pixel selection (VPOUT) + * Here -1 is to make the height value less than FMT_VERT.FMTLNV + */ + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) + << CCDC_VP_OUT_VERT_NUM_SHIFT; + else + val = + ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) - + 1) & CCDC_VP_OUT_VERT_NUM_MASK)) << + CCDC_VP_OUT_VERT_NUM_SHIFT; + + val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK) + << CCDC_VP_OUT_HORZ_NUM_SHIFT; + val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK; + regw(val, CCDC_VP_OUT); + + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val); + regw(syn_mode, CCDC_SYN_MODE); + dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode); + + ccdc_sbl_reset(); + dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw..."); + ccdc_readregs(); +} + +static int ccdc_configure(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.buf_type = buf_type; + else + ccdc_cfg.ycbcr.buf_type = buf_type; + return 0; +} + +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.buf_type; + return ccdc_cfg.ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + ccdc_cfg.bayer.config_params.alaw.enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} + +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw; + u32 pixfmt; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} + +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.win = *win; + else + ccdc_cfg.ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + *win = ccdc_cfg.bayer.win; + else + *win = ccdc_cfg.ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int len; + + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_cfg.bayer.win.width; + else + len = ccdc_cfg.bayer.win.width * 2; + } else + len = ccdc_cfg.ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + ccdc_cfg.bayer.frm_fmt = frm_fmt; + else + ccdc_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_cfg.if_type == VPFE_RAW_BAYER) + return ccdc_cfg.bayer.frm_fmt; + else + return ccdc_cfg.ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(CCDC_SYN_MODE) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw(addr & 0xffffffe0, CCDC_SDR_ADDR); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + case VPFE_BT656_10BIT: + ccdc_cfg.ycbcr.vd_pol = params->vdpol; + ccdc_cfg.ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static void ccdc_save_context(void) +{ + ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR); + ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE); + ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID); + ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES); + ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO); + ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START); + ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES); + ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING); + ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF); + ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST); + ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR); + ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP); + ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB); + ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN); + ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP); + ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC); + ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR); + ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT); + ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW); + ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF); + ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG); + ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG); + ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ); + ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT); + ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0); + ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1); + ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2); + ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3); + ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4); + ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5); + ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6); + ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7); + ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0); + ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1); + ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0); + ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1); + ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT); +} + +static void ccdc_restore_context(void) +{ + regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE); + regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID); + regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES); + regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO); + regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START); + regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES); + regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING); + regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF); + regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST); + regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR); + regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP); + regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB); + regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN); + regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP); + regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC); + regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR); + regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT); + regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW); + regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF); + regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG); + regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG); + regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ); + regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT); + regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0); + regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1); + regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2); + regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3); + regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4); + regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5); + regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6); + regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7); + regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0); + regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1); + regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0); + regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1); + regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT); + regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR); +} +static struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM6446 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .reset = ccdc_sbl_reset, + .enable = ccdc_enable, + .set_hw_if_params = ccdc_set_hw_if_params, + .set_params = ccdc_set_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int __devinit dm644x_ccdc_probe(struct platform_device *pdev) +{ + struct resource *res; + int status = 0; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&ccdc_hw_dev); + if (status < 0) + return status; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + status = -ENODEV; + goto fail_nores; + } + + res = request_mem_region(res->start, resource_size(res), res->name); + if (!res) { + status = -EBUSY; + goto fail_nores; + } + + ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res)); + if (!ccdc_cfg.base_addr) { + status = -ENOMEM; + goto fail_nomem; + } + + /* Get and enable Master clock */ + ccdc_cfg.mclk = clk_get(&pdev->dev, "master"); + if (IS_ERR(ccdc_cfg.mclk)) { + status = PTR_ERR(ccdc_cfg.mclk); + goto fail_nomap; + } + if (clk_enable(ccdc_cfg.mclk)) { + status = -ENODEV; + goto fail_mclk; + } + + /* Get and enable Slave clock */ + ccdc_cfg.sclk = clk_get(&pdev->dev, "slave"); + if (IS_ERR(ccdc_cfg.sclk)) { + status = PTR_ERR(ccdc_cfg.sclk); + goto fail_mclk; + } + if (clk_enable(ccdc_cfg.sclk)) { + status = -ENODEV; + goto fail_sclk; + } + ccdc_cfg.dev = &pdev->dev; + printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name); + return 0; +fail_sclk: + clk_put(ccdc_cfg.sclk); +fail_mclk: + clk_put(ccdc_cfg.mclk); +fail_nomap: + iounmap(ccdc_cfg.base_addr); +fail_nomem: + release_mem_region(res->start, resource_size(res)); +fail_nores: + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return status; +} + +static int dm644x_ccdc_remove(struct platform_device *pdev) +{ + struct resource *res; + + clk_put(ccdc_cfg.mclk); + clk_put(ccdc_cfg.sclk); + iounmap(ccdc_cfg.base_addr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, resource_size(res)); + vpfe_unregister_ccdc_device(&ccdc_hw_dev); + return 0; +} + +static int dm644x_ccdc_suspend(struct device *dev) +{ + /* Save CCDC context */ + ccdc_save_context(); + /* Disable CCDC */ + ccdc_enable(0); + /* Disable both master and slave clock */ + clk_disable(ccdc_cfg.mclk); + clk_disable(ccdc_cfg.sclk); + + return 0; +} + +static int dm644x_ccdc_resume(struct device *dev) +{ + /* Enable both master and slave clock */ + clk_enable(ccdc_cfg.mclk); + clk_enable(ccdc_cfg.sclk); + /* Restore CCDC context */ + ccdc_restore_context(); + + return 0; +} + +static const struct dev_pm_ops dm644x_ccdc_pm_ops = { + .suspend = dm644x_ccdc_suspend, + .resume = dm644x_ccdc_resume, +}; + +static struct platform_driver dm644x_ccdc_driver = { + .driver = { + .name = "dm644x_ccdc", + .owner = THIS_MODULE, + .pm = &dm644x_ccdc_pm_ops, + }, + .remove = __devexit_p(dm644x_ccdc_remove), + .probe = dm644x_ccdc_probe, +}; + +module_platform_driver(dm644x_ccdc_driver); diff --git a/drivers/media/platform/davinci/dm644x_ccdc_regs.h b/drivers/media/platform/davinci/dm644x_ccdc_regs.h new file mode 100644 index 00000000000..90370e414e2 --- /dev/null +++ b/drivers/media/platform/davinci/dm644x_ccdc_regs.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _DM644X_CCDC_REGS_H +#define _DM644X_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define CCDC_PID 0x0 +#define CCDC_PCR 0x4 +#define CCDC_SYN_MODE 0x8 +#define CCDC_HD_VD_WID 0xc +#define CCDC_PIX_LINES 0x10 +#define CCDC_HORZ_INFO 0x14 +#define CCDC_VERT_START 0x18 +#define CCDC_VERT_LINES 0x1c +#define CCDC_CULLING 0x20 +#define CCDC_HSIZE_OFF 0x24 +#define CCDC_SDOFST 0x28 +#define CCDC_SDR_ADDR 0x2c +#define CCDC_CLAMP 0x30 +#define CCDC_DCSUB 0x34 +#define CCDC_COLPTN 0x38 +#define CCDC_BLKCMP 0x3c +#define CCDC_FPC 0x40 +#define CCDC_FPC_ADDR 0x44 +#define CCDC_VDINT 0x48 +#define CCDC_ALAW 0x4c +#define CCDC_REC656IF 0x50 +#define CCDC_CCDCFG 0x54 +#define CCDC_FMTCFG 0x58 +#define CCDC_FMT_HORZ 0x5c +#define CCDC_FMT_VERT 0x60 +#define CCDC_FMT_ADDR0 0x64 +#define CCDC_FMT_ADDR1 0x68 +#define CCDC_FMT_ADDR2 0x6c +#define CCDC_FMT_ADDR3 0x70 +#define CCDC_FMT_ADDR4 0x74 +#define CCDC_FMT_ADDR5 0x78 +#define CCDC_FMT_ADDR6 0x7c +#define CCDC_FMT_ADDR7 0x80 +#define CCDC_PRGEVEN_0 0x84 +#define CCDC_PRGEVEN_1 0x88 +#define CCDC_PRGODD_0 0x8c +#define CCDC_PRGODD_1 0x90 +#define CCDC_VP_OUT 0x94 +#define CCDC_REG_END 0x98 + +/*************************************************************** +* Define for various register bit mask and shifts for CCDC +****************************************************************/ +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_HSIZE_OFF_MASK 0xffffffe0 +#define CCDC_32BYTE_ALIGN_VAL 31 +#define CCDC_FRM_FMT_MASK 0x1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_VP2SDR_DISABLE 0xFFFBFFFF +#define CCDC_WEN_ENABLE (1 << 17) +#define CCDC_SDR2RSZ_DISABLE 0xFFF7FFFF +#define CCDC_VDHDEN_ENABLE (1 << 16) +#define CCDC_LPF_ENABLE (1 << 14) +#define CCDC_ALAW_ENABLE (1 << 3) +#define CCDC_ALAW_GAMA_WD_MASK 7 +#define CCDC_BLK_CLAMP_ENABLE (1 << 31) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x7FFF +#define CCDC_BLK_ST_PXL_SHIFT 10 +#define CCDC_BLK_SAMPLE_LN_MASK 7 +#define CCDC_BLK_SAMPLE_LN_SHIFT 28 +#define CCDC_BLK_SAMPLE_LINE_MASK 7 +#define CCDC_BLK_SAMPLE_LINE_SHIFT 25 +#define CCDC_BLK_DC_SUB_MASK 0x03FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 16 +#define CCDC_BLK_COMP_R_COMP_SHIFT 24 +#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define CCDC_FPC_ENABLE (1 << 15) +#define CCDC_FPC_DISABLE 0 +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE (1 << 11) +#define CCDC_FMTCFG_VPIN_MASK 7 +#define CCDC_FMTCFG_VPIN_SHIFT 12 +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF +#define CCDC_HORZ_INFO_SPH_SHIFT 16 +#define CCDC_VERT_START_SLV0_SHIFT 16 +#define CCDC_VDINT_VDINT0_SHIFT 16 +#define CCDC_VDINT_VDINT1_MASK 0xFFFF +#define CCDC_PPC_RAW 1 +#define CCDC_DCSUB_DEFAULT_VAL 0 +#define CCDC_CLAMP_DEFAULT_VAL 0 +#define CCDC_ENABLE_VIDEO_PORT 0x8000 +#define CCDC_DISABLE_VIDEO_PORT 0 +#define CCDC_COLPTN_VAL 0xBB11BB11 +#define CCDC_TWO_BYTES_PER_PIXEL 2 +#define CCDC_INTERLACED_IMAGE_INVERT 0x4B6D +#define CCDC_INTERLACED_NO_IMAGE_INVERT 0x0249 +#define CCDC_PROGRESSIVE_IMAGE_INVERT 0x4000 +#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT 0 +#define CCDC_INTERLACED_HEIGHT_SHIFT 1 +#define CCDC_SYN_MODE_INPMOD_SHIFT 12 +#define CCDC_SYN_MODE_INPMOD_MASK 3 +#define CCDC_SYN_MODE_8BITS (7 << 8) +#define CCDC_SYN_MODE_10BITS (6 << 8) +#define CCDC_SYN_MODE_11BITS (5 << 8) +#define CCDC_SYN_MODE_12BITS (4 << 8) +#define CCDC_SYN_MODE_13BITS (3 << 8) +#define CCDC_SYN_MODE_14BITS (2 << 8) +#define CCDC_SYN_MODE_15BITS (1 << 8) +#define CCDC_SYN_MODE_16BITS (0 << 8) +#define CCDC_SYN_FLDMODE_MASK 1 +#define CCDC_SYN_FLDMODE_SHIFT 7 +#define CCDC_REC656IF_BT656_EN 3 +#define CCDC_SYN_MODE_VD_POL_NEGATIVE (1 << 2) +#define CCDC_CCDCFG_Y8POS_SHIFT 11 +#define CCDC_CCDCFG_BW656_10BIT (1 << 5) +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_NO_CULLING 0xffff00ff +#endif diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c new file mode 100644 index 00000000000..b99d5423e3a --- /dev/null +++ b/drivers/media/platform/davinci/isif.c @@ -0,0 +1,1162 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Image Sensor Interface (ISIF) driver + * + * This driver is for configuring the ISIF IP available on DM365 or any other + * TI SoCs. This is used for capturing yuv or bayer video or image data + * from a decoder or sensor. This IP is similar to the CCDC IP on DM355 + * and DM6446, but with enhanced or additional ip blocks. The driver + * configures the ISIF upon commands from the vpfe bridge driver through + * ccdc_hw_device interface. + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Add support for control ioctl + */ +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/videodev2.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/module.h> + +#include <mach/mux.h> + +#include <media/davinci/isif.h> +#include <media/davinci/vpss.h> + +#include "isif_regs.h" +#include "ccdc_hw_device.h" + +/* Defaults for module configuration parameters */ +static struct isif_config_params_raw isif_config_defaults = { + .linearize = { + .en = 0, + .corr_shft = ISIF_NO_SHIFT, + .scale_fact = {1, 0}, + }, + .df_csc = { + .df_or_csc = 0, + .csc = { + .en = 0, + }, + }, + .dfc = { + .en = 0, + }, + .bclamp = { + .en = 0, + }, + .gain_offset = { + .gain = { + .r_ye = {1, 0}, + .gr_cy = {1, 0}, + .gb_g = {1, 0}, + .b_mg = {1, 0}, + }, + }, + .culling = { + .hcpat_odd = 0xff, + .hcpat_even = 0xff, + .vcpat = 0xff, + }, + .compress = { + .alg = ISIF_ALAW, + }, +}; + +/* ISIF operation configuration */ +static struct isif_oper_config { + struct device *dev; + enum vpfe_hw_if_type if_type; + struct isif_ycbcr_config ycbcr; + struct isif_params_raw bayer; + enum isif_data_pack data_pack; + /* Master clock */ + struct clk *mclk; + /* ISIF base address */ + void __iomem *base_addr; + /* ISIF Linear Table 0 */ + void __iomem *linear_tbl0_addr; + /* ISIF Linear Table 1 */ + void __iomem *linear_tbl1_addr; +} isif_cfg = { + .ycbcr = { + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .win = ISIF_WIN_NTSC, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED, + }, + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = ISIF_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = {1, 0}, + .gr_cy = {1, 0}, + .gb_g = {1, 0}, + .b_mg = {1, 0}, + }, + .cfa_pat = ISIF_CFA_PAT_MOSAIC, + .data_msb = ISIF_BIT_MSB_11, + .config_params = { + .data_shift = ISIF_NO_SHIFT, + .col_pat_field0 = { + .olop = ISIF_GREEN_BLUE, + .olep = ISIF_BLUE, + .elop = ISIF_RED, + .elep = ISIF_GREEN_RED, + }, + .col_pat_field1 = { + .olop = ISIF_GREEN_BLUE, + .olep = ISIF_BLUE, + .elop = ISIF_RED, + .elep = ISIF_GREEN_RED, + }, + .test_pat_gen = 0, + }, + }, + .data_pack = ISIF_DATA_PACK8, +}; + +/* Raw Bayer formats */ +static const u32 isif_raw_bayer_pix_formats[] = { + V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static const u32 isif_raw_yuv_pix_formats[] = { + V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(isif_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, isif_cfg.base_addr + offset); +} + +/* reg_modify() - read, modify and write register */ +static inline u32 reg_modify(u32 mask, u32 val, u32 offset) +{ + u32 new_val = (regr(offset) & ~mask) | (val & mask); + + regw(new_val, offset); + return new_val; +} + +static inline void regw_lin_tbl(u32 val, u32 offset, int i) +{ + if (!i) + __raw_writel(val, isif_cfg.linear_tbl0_addr + offset); + else + __raw_writel(val, isif_cfg.linear_tbl1_addr + offset); +} + +static void isif_disable_all_modules(void) +{ + /* disable BC */ + regw(0, CLAMPCFG); + /* disable vdfc */ + regw(0, DFCCTL); + /* disable CSC */ + regw(0, CSCCTL); + /* disable linearization */ + regw(0, LINCFG0); + /* disable other modules here as they are supported */ +} + +static void isif_enable(int en) +{ + if (!en) { + /* Before disable isif, disable all ISIF modules */ + isif_disable_all_modules(); + /* + * wait for next VD. Assume lowest scan rate is 12 Hz. So + * 100 msec delay is good enough + */ + msleep(100); + } + reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN); +} + +static void isif_enable_output_to_sdram(int en) +{ + reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN); +} + +static void isif_config_culling(struct isif_cul *cul) +{ + u32 val; + + /* Horizontal pattern */ + val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd; + regw(val, CULH); + + /* vertical pattern */ + regw(cul->vcpat, CULV); + + /* LPF */ + reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT, + cul->en_lpf << ISIF_LPF_SHIFT, MODESET); +} + +static void isif_config_gain_offset(void) +{ + struct isif_gain_offsets_adj *gain_off_p = + &isif_cfg.bayer.config_params.gain_offset; + u32 val; + + val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) | + (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) | + (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) | + (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) | + (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) | + (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT); + + reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD); + + val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.r_ye.decimal; + regw(val, CRGAIN); + + val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.gr_cy.decimal; + regw(val, CGRGAIN); + + val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.gb_g.decimal; + regw(val, CGBGAIN); + + val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) | + gain_off_p->gain.b_mg.decimal; + regw(val, CBGAIN); + + regw(gain_off_p->offset, COFSTA); +} + +static void isif_restore_defaults(void) +{ + enum vpss_ccdc_source_sel source = VPSS_CCDCIN; + + dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults..."); + isif_cfg.bayer.config_params = isif_config_defaults; + /* Enable clock to ISIF, IPIPEIF and BL */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 1); + vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1); + vpss_enable_clock(VPSS_BL_CLOCK, 1); + /* Set default offset and gain */ + isif_config_gain_offset(); + vpss_select_ccdc_source(source); + dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults..."); +} + +static int isif_open(struct device *device) +{ + isif_restore_defaults(); + return 0; +} + +/* This function will configure the window size to be capture in ISIF reg */ +static void isif_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(isif_cfg.dev, "\nStarting isif_setwin..."); + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start & START_PX_HOR_MASK, SPH); + regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* To account for VD since line 0 doesn't have any data */ + vert_start += 1; + } else { + /* To account for VD since line 0 doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(mid_img, VDINT1); + } + + regw(0, VDINT0); + regw(vert_start & START_VER_ONE_MASK, SLV0); + regw(vert_start & START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & NUM_LINES_VER, LNV); +} + +static void isif_config_bclamp(struct isif_black_clamp *bc) +{ + u32 val; + + /* + * DC Offset is always added to image data irrespective of bc enable + * status + */ + regw(bc->dc_offset, CLDCOFST); + + if (bc->en) { + val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; + + /* Enable BC and horizontal clamp caculation paramaters */ + val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); + + regw(val, CLAMPCFG); + + if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) { + /* + * Window count for calculation + * Base window selection + * pixel limit + * Horizontal size of window + * vertical size of the window + * Horizontal start position of the window + * Vertical start position of the window + */ + val = bc->horz.win_count_calc | + ((!!bc->horz.base_win_sel_calc) << + ISIF_HORZ_BC_WIN_SEL_SHIFT) | + ((!!bc->horz.clamp_pix_limit) << + ISIF_HORZ_BC_PIX_LIMIT_SHIFT) | + (bc->horz.win_h_sz_calc << + ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) | + (bc->horz.win_v_sz_calc << + ISIF_HORZ_BC_WIN_V_SIZE_SHIFT); + regw(val, CLHWIN0); + + regw(bc->horz.win_start_h_calc, CLHWIN1); + regw(bc->horz.win_start_v_calc, CLHWIN2); + } + + /* vertical clamp caculation paramaters */ + + /* Reset clamp value sel for previous line */ + val |= + (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) | + (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT); + regw(val, CLVWIN0); + + /* Optical Black horizontal start position */ + regw(bc->vert.ob_start_h, CLVWIN1); + /* Optical Black vertical start position */ + regw(bc->vert.ob_start_v, CLVWIN2); + /* Optical Black vertical size for calculation */ + regw(bc->vert.ob_v_sz_calc, CLVWIN3); + /* Vertical start position for BC subtraction */ + regw(bc->vert_start_sub, CLSV); + } +} + +static void isif_config_linearization(struct isif_linearize *linearize) +{ + u32 val, i; + + if (!linearize->en) { + regw(0, LINCFG0); + return; + } + + /* shift value for correction & enable linearization (set lsb) */ + val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1; + regw(val, LINCFG0); + + /* Scale factor */ + val = ((!!linearize->scale_fact.integer) << + ISIF_LIN_SCALE_FACT_INTEG_SHIFT) | + linearize->scale_fact.decimal; + regw(val, LINCFG1); + + for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) { + if (i % 2) + regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1); + else + regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0); + } +} + +static int isif_config_dfc(struct isif_dfc *vdfc) +{ + /* initialize retries to loop for max ~ 250 usec */ + u32 val, count, retries = loops_per_jiffy / (4000/HZ); + int i; + + if (!vdfc->en) + return 0; + + /* Correction mode */ + val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT); + + /* Correct whole line or partial */ + if (vdfc->corr_whole_line) + val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT; + + /* level shift value */ + val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT; + + regw(val, DFCCTL); + + /* Defect saturation level */ + regw(vdfc->def_sat_level, VDFSATLV); + + regw(vdfc->table[0].pos_vert, DFCMEM0); + regw(vdfc->table[0].pos_horz, DFCMEM1); + if (vdfc->corr_mode == ISIF_VDFC_NORMAL || + vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { + regw(vdfc->table[0].level_at_pos, DFCMEM2); + regw(vdfc->table[0].level_up_pixels, DFCMEM3); + regw(vdfc->table[0].level_low_pixels, DFCMEM4); + } + + /* set DFCMARST and set DFCMWR */ + val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1; + regw(val, DFCMEMCTL); + + count = retries; + while (count && (regr(DFCMEMCTL) & 0x1)) + count--; + + if (!count) { + dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n"); + return -1; + } + + for (i = 1; i < vdfc->num_vdefects; i++) { + regw(vdfc->table[i].pos_vert, DFCMEM0); + regw(vdfc->table[i].pos_horz, DFCMEM1); + if (vdfc->corr_mode == ISIF_VDFC_NORMAL || + vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { + regw(vdfc->table[i].level_at_pos, DFCMEM2); + regw(vdfc->table[i].level_up_pixels, DFCMEM3); + regw(vdfc->table[i].level_low_pixels, DFCMEM4); + } + val = regr(DFCMEMCTL); + /* clear DFCMARST and set DFCMWR */ + val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); + val |= 1; + regw(val, DFCMEMCTL); + + count = retries; + while (count && (regr(DFCMEMCTL) & 0x1)) + count--; + + if (!count) { + dev_err(isif_cfg.dev, + "defect table write timeout !!!\n"); + return -1; + } + } + if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) { + /* Extra cycle needed */ + regw(0, DFCMEM0); + regw(0x1FFF, DFCMEM1); + regw(1, DFCMEMCTL); + } + + /* enable VDFC */ + reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT), + DFCCTL); + return 0; +} + +static void isif_config_csc(struct isif_df_csc *df_csc) +{ + u32 val1 = 0, val2 = 0, i; + + if (!df_csc->csc.en) { + regw(0, CSCCTL); + return; + } + for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (df_csc->csc.coeff[i].integer << + ISIF_CSC_COEF_INTEG_SHIFT) | + df_csc->csc.coeff[i].decimal; + } else { + + /* CSCM - MSB */ + val2 = (df_csc->csc.coeff[i].integer << + ISIF_CSC_COEF_INTEG_SHIFT) | + df_csc->csc.coeff[i].decimal; + val2 <<= ISIF_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } + + /* program the active area */ + regw(df_csc->start_pix, FMTSPH); + /* + * one extra pixel as required for CSC. Actually number of + * pixel - 1 should be configured in this register. So we + * need to subtract 1 before writing to FMTSPH, but we will + * not do this since csc requires one extra pixel + */ + regw(df_csc->num_pixels, FMTLNH); + regw(df_csc->start_line, FMTSLV); + /* + * one extra line as required for CSC. See reason documented for + * num_pixels + */ + regw(df_csc->num_lines, FMTLNV); + + /* Enable CSC */ + regw(1, CSCCTL); +} + +static int isif_config_raw(void) +{ + struct isif_params_raw *params = &isif_cfg.bayer; + struct isif_config_params_raw *module_params = + &isif_cfg.bayer.config_params; + struct vpss_pg_frame_size frame_size; + struct vpss_sync_pol sync; + u32 val; + + dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n"); + + /* + * Configure CCDCFG register:- + * Set CCD Not to swap input since input is RAW data + * Set FID detection function to Latch at V-Sync + * Set WENLOG - isif valid area + * Set TRGSEL + * Set EXTRG + * Packed to 8 or 16 bits + */ + + val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC | + ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN | + ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack; + + dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val); + regw(val, CCDCFG); + + /* + * Configure the vertical sync polarity(MODESET.VDPOL) + * Configure the horizontal sync polarity (MODESET.HDPOL) + * Configure frame id polarity (MODESET.FLDPOL) + * Configure data polarity + * Configure External WEN Selection + * Configure frame format(progressive or interlace) + * Configure pixel format (Input mode) + * Configure the data shift + */ + + val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) | + (params->hd_pol << ISIF_HD_POL_SHIFT) | + (params->fid_pol << ISIF_FID_POL_SHIFT) | + (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) | + (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) | + (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | + (params->pix_fmt << ISIF_INPUT_SHIFT) | + (params->config_params.data_shift << ISIF_DATASFT_SHIFT); + + regw(val, MODESET); + dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val); + + /* + * Configure GAMMAWD register + * CFA pattern setting + */ + val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT; + + /* Gamma msb */ + if (module_params->compress.alg == ISIF_ALAW) + val |= ISIF_ALAW_ENABLE; + + val |= (params->data_msb << ISIF_ALAW_GAMA_WD_SHIFT); + regw(val, CGAMMAWD); + + /* Configure DPCM compression settings */ + if (module_params->compress.alg == ISIF_DPCM) { + val = BIT(ISIF_DPCM_EN_SHIFT) | + (module_params->compress.pred << + ISIF_DPCM_PREDICTOR_SHIFT); + } + + regw(val, MISC); + + /* Configure Gain & Offset */ + isif_config_gain_offset(); + + /* Configure Color pattern */ + val = (params->config_params.col_pat_field0.olop) | + (params->config_params.col_pat_field0.olep << 2) | + (params->config_params.col_pat_field0.elop << 4) | + (params->config_params.col_pat_field0.elep << 6) | + (params->config_params.col_pat_field1.olop << 8) | + (params->config_params.col_pat_field1.olep << 10) | + (params->config_params.col_pat_field1.elop << 12) | + (params->config_params.col_pat_field1.elep << 14); + regw(val, CCOLP); + dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val); + + /* Configure HSIZE register */ + val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT; + + /* calculate line offset in 32 bytes based on pack value */ + if (isif_cfg.data_pack == ISIF_PACK_8BIT) + val |= ((params->win.width + 31) >> 5); + else if (isif_cfg.data_pack == ISIF_PACK_12BIT) + val |= (((params->win.width + + (params->win.width >> 2)) + 31) >> 5); + else + val |= (((params->win.width * 2) + 31) >> 5); + regw(val, HSIZE); + + /* Configure SDOFST register */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_en) { + /* For interlace inverse mode */ + regw(0x4B6D, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n"); + } else { + /* For interlace non inverse mode */ + regw(0x0B6D, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n"); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + if (params->image_invert_en) { + /* For progressive inverse mode */ + regw(0x4000, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n"); + } else { + /* For progressive non inverse mode */ + regw(0x0000, SDOFST); + dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n"); + } + } + + /* Configure video window */ + isif_setwin(¶ms->win, params->frm_fmt, 1); + + /* Configure Black Clamp */ + isif_config_bclamp(&module_params->bclamp); + + /* Configure Vertical Defection Pixel Correction */ + if (isif_config_dfc(&module_params->dfc) < 0) + return -EFAULT; + + if (!module_params->df_csc.df_or_csc) + /* Configure Color Space Conversion */ + isif_config_csc(&module_params->df_csc); + + isif_config_linearization(&module_params->linearize); + + /* Configure Culling */ + isif_config_culling(&module_params->culling); + + /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */ + regw(module_params->horz_offset, DATAHOFST); + regw(module_params->vert_offset, DATAVOFST); + + /* Setup test pattern if enabled */ + if (params->config_params.test_pat_gen) { + /* Use the HD/VD pol settings from user */ + sync.ccdpg_hdpol = params->hd_pol; + sync.ccdpg_vdpol = params->vd_pol; + dm365_vpss_set_sync_pol(sync); + frame_size.hlpfr = isif_cfg.bayer.win.width; + frame_size.pplen = isif_cfg.bayer.win.height; + dm365_vpss_set_pg_frame_size(frame_size); + vpss_select_ccdc_source(VPSS_PGLPBK); + } + + dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n"); + return 0; +} + +static int isif_set_buftype(enum ccdc_buftype buf_type) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + isif_cfg.bayer.buf_type = buf_type; + else + isif_cfg.ycbcr.buf_type = buf_type; + + return 0; + +} +static enum ccdc_buftype isif_get_buftype(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_cfg.bayer.buf_type; + + return isif_cfg.ycbcr.buf_type; +} + +static int isif_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) { + *pix = isif_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) { + *pix = isif_raw_yuv_pix_formats[i]; + ret = 0; + } + } + + return ret; +} + +static int isif_set_pixel_format(unsigned int pixfmt) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (pixfmt == V4L2_PIX_FMT_SBGGR8) { + if ((isif_cfg.bayer.config_params.compress.alg != + ISIF_ALAW) && + (isif_cfg.bayer.config_params.compress.alg != + ISIF_DPCM)) { + dev_dbg(isif_cfg.dev, + "Either configure A-Law or DPCM\n"); + return -EINVAL; + } + isif_cfg.data_pack = ISIF_PACK_8BIT; + } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) { + isif_cfg.bayer.config_params.compress.alg = + ISIF_NO_COMPRESSION; + isif_cfg.data_pack = ISIF_PACK_16BIT; + } else + return -EINVAL; + isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + isif_cfg.data_pack = ISIF_PACK_8BIT; + } + return 0; +} + +static u32 isif_get_pixel_format(void) +{ + u32 pixfmt; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) + if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW || + isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} + +static int isif_set_image_window(struct v4l2_rect *win) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + isif_cfg.bayer.win.top = win->top; + isif_cfg.bayer.win.left = win->left; + isif_cfg.bayer.win.width = win->width; + isif_cfg.bayer.win.height = win->height; + } else { + isif_cfg.ycbcr.win.top = win->top; + isif_cfg.ycbcr.win.left = win->left; + isif_cfg.ycbcr.win.width = win->width; + isif_cfg.ycbcr.win.height = win->height; + } + return 0; +} + +static void isif_get_image_window(struct v4l2_rect *win) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + *win = isif_cfg.bayer.win; + else + *win = isif_cfg.ycbcr.win; +} + +static unsigned int isif_get_line_length(void) +{ + unsigned int len; + + if (isif_cfg.if_type == VPFE_RAW_BAYER) { + if (isif_cfg.data_pack == ISIF_PACK_8BIT) + len = ((isif_cfg.bayer.win.width)); + else if (isif_cfg.data_pack == ISIF_PACK_12BIT) + len = (((isif_cfg.bayer.win.width * 2) + + (isif_cfg.bayer.win.width >> 2))); + else + len = (((isif_cfg.bayer.win.width * 2))); + } else + len = (((isif_cfg.ycbcr.win.width * 2))); + return ALIGN(len, 32); +} + +static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + isif_cfg.bayer.frm_fmt = frm_fmt; + else + isif_cfg.ycbcr.frm_fmt = frm_fmt; + return 0; +} +static enum ccdc_frmfmt isif_get_frame_format(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_cfg.bayer.frm_fmt; + return isif_cfg.ycbcr.frm_fmt; +} + +static int isif_getfid(void) +{ + return (regr(MODESET) >> 15) & 0x1; +} + +/* misc operations */ +static void isif_setfbaddr(unsigned long addr) +{ + regw((addr >> 21) & 0x07ff, CADU); + regw((addr >> 5) & 0x0ffff, CADL); +} + +static int isif_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + isif_cfg.if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_BT656_10BIT: + case VPFE_YCBCR_SYNC_8: + isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT; + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + break; + case VPFE_BT1120: + case VPFE_YCBCR_SYNC_16: + isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT; + isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + break; + case VPFE_RAW_BAYER: + isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; + break; + default: + dev_dbg(isif_cfg.dev, "Invalid interface type\n"); + return -EINVAL; + } + + return 0; +} + +/* This function will configure ISIF for YCbCr parameters. */ +static int isif_config_ycbcr(void) +{ + struct isif_ycbcr_config *params = &isif_cfg.ycbcr; + struct vpss_pg_frame_size frame_size; + u32 modeset = 0, ccdcfg = 0; + struct vpss_sync_pol sync; + + dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr..."); + + /* configure pixel format or input mode */ + modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) | + (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | + (params->fid_pol << ISIF_FID_POL_SHIFT) | + (params->hd_pol << ISIF_HD_POL_SHIFT) | + (params->vd_pol << ISIF_VD_POL_SHIFT); + + /* pack the data to 8-bit ISIFCFG */ + switch (isif_cfg.if_type) { + case VPFE_BT656: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT); + regw(3, REC656IF); + ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR; + break; + case VPFE_BT656_10BIT: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + /* setup BT.656, embedded sync */ + regw(3, REC656IF); + /* enable 10 bit mode in ccdcfg */ + ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR | + ISIF_BW656_ENABLE; + break; + case VPFE_BT1120: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + regw(3, REC656IF); + break; + + case VPFE_YCBCR_SYNC_8: + ccdcfg |= ISIF_DATA_PACK8; + ccdcfg |= ISIF_YCINSWP_YCBCR; + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + break; + case VPFE_YCBCR_SYNC_16: + if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { + dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); + return -EINVAL; + } + break; + default: + /* should never come here */ + dev_dbg(isif_cfg.dev, "Invalid interface type\n"); + return -EINVAL; + } + + regw(modeset, MODESET); + + /* Set up pix order */ + ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT; + + regw(ccdcfg, CCDCFG); + + /* configure video window */ + if ((isif_cfg.if_type == VPFE_BT1120) || + (isif_cfg.if_type == VPFE_YCBCR_SYNC_16)) + isif_setwin(¶ms->win, params->frm_fmt, 1); + else + isif_setwin(¶ms->win, params->frm_fmt, 2); + + /* + * configure the horizontal line offset + * this is done by rounding up width to a multiple of 16 pixels + * and multiply by two to account for y:cb:cr 4:2:2 data + */ + regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE); + + /* configure the memory line offset */ + if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) && + (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)) + /* two fields are interleaved in memory */ + regw(0x00000249, SDOFST); + + /* Setup test pattern if enabled */ + if (isif_cfg.bayer.config_params.test_pat_gen) { + sync.ccdpg_hdpol = params->hd_pol; + sync.ccdpg_vdpol = params->vd_pol; + dm365_vpss_set_sync_pol(sync); + dm365_vpss_set_pg_frame_size(frame_size); + } + return 0; +} + +static int isif_configure(void) +{ + if (isif_cfg.if_type == VPFE_RAW_BAYER) + return isif_config_raw(); + return isif_config_ycbcr(); +} + +static int isif_close(struct device *device) +{ + /* copy defaults to module params */ + isif_cfg.bayer.config_params = isif_config_defaults; + return 0; +} + +static struct ccdc_hw_device isif_hw_dev = { + .name = "ISIF", + .owner = THIS_MODULE, + .hw_ops = { + .open = isif_open, + .close = isif_close, + .enable = isif_enable, + .enable_out_to_sdram = isif_enable_output_to_sdram, + .set_hw_if_params = isif_set_hw_if_params, + .configure = isif_configure, + .set_buftype = isif_set_buftype, + .get_buftype = isif_get_buftype, + .enum_pix = isif_enum_pix, + .set_pixel_format = isif_set_pixel_format, + .get_pixel_format = isif_get_pixel_format, + .set_frame_format = isif_set_frame_format, + .get_frame_format = isif_get_frame_format, + .set_image_window = isif_set_image_window, + .get_image_window = isif_get_image_window, + .get_line_length = isif_get_line_length, + .setfbaddr = isif_setfbaddr, + .getfid = isif_getfid, + }, +}; + +static int __devinit isif_probe(struct platform_device *pdev) +{ + void (*setup_pinmux)(void); + struct resource *res; + void *__iomem addr; + int status = 0, i; + + /* + * first try to register with vpfe. If not correct platform, then we + * don't have to iomap + */ + status = vpfe_register_ccdc_device(&isif_hw_dev); + if (status < 0) + return status; + + /* Get and enable Master clock */ + isif_cfg.mclk = clk_get(&pdev->dev, "master"); + if (IS_ERR(isif_cfg.mclk)) { + status = PTR_ERR(isif_cfg.mclk); + goto fail_mclk; + } + if (clk_enable(isif_cfg.mclk)) { + status = -ENODEV; + goto fail_mclk; + } + + /* Platform data holds setup_pinmux function ptr */ + if (NULL == pdev->dev.platform_data) { + status = -ENODEV; + goto fail_mclk; + } + setup_pinmux = pdev->dev.platform_data; + /* + * setup Mux configuration for ccdc which may be different for + * different SoCs using this CCDC + */ + setup_pinmux(); + + i = 0; + /* Get the ISIF base address, linearization table0 and table1 addr. */ + while (i < 3) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) { + status = -ENODEV; + goto fail_nobase_res; + } + res = request_mem_region(res->start, resource_size(res), + res->name); + if (!res) { + status = -EBUSY; + goto fail_nobase_res; + } + addr = ioremap_nocache(res->start, resource_size(res)); + if (!addr) { + status = -ENOMEM; + goto fail_base_iomap; + } + switch (i) { + case 0: + /* ISIF base address */ + isif_cfg.base_addr = addr; + break; + case 1: + /* ISIF linear tbl0 address */ + isif_cfg.linear_tbl0_addr = addr; + break; + default: + /* ISIF linear tbl0 address */ + isif_cfg.linear_tbl1_addr = addr; + break; + } + i++; + } + isif_cfg.dev = &pdev->dev; + + printk(KERN_NOTICE "%s is registered with vpfe.\n", + isif_hw_dev.name); + return 0; +fail_base_iomap: + release_mem_region(res->start, resource_size(res)); + i--; +fail_nobase_res: + if (isif_cfg.base_addr) + iounmap(isif_cfg.base_addr); + if (isif_cfg.linear_tbl0_addr) + iounmap(isif_cfg.linear_tbl0_addr); + + while (i >= 0) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + release_mem_region(res->start, resource_size(res)); + i--; + } +fail_mclk: + clk_put(isif_cfg.mclk); + vpfe_unregister_ccdc_device(&isif_hw_dev); + return status; +} + +static int isif_remove(struct platform_device *pdev) +{ + struct resource *res; + int i = 0; + + iounmap(isif_cfg.base_addr); + iounmap(isif_cfg.linear_tbl0_addr); + iounmap(isif_cfg.linear_tbl1_addr); + while (i < 3) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (res) + release_mem_region(res->start, resource_size(res)); + i++; + } + vpfe_unregister_ccdc_device(&isif_hw_dev); + return 0; +} + +static struct platform_driver isif_driver = { + .driver = { + .name = "isif", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(isif_remove), + .probe = isif_probe, +}; + +module_platform_driver(isif_driver); + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/davinci/isif_regs.h b/drivers/media/platform/davinci/isif_regs.h new file mode 100644 index 00000000000..aa69a463c12 --- /dev/null +++ b/drivers/media/platform/davinci/isif_regs.h @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ISIF_REGS_H +#define _ISIF_REGS_H + +/* ISIF registers relative offsets */ +#define SYNCEN 0x00 +#define MODESET 0x04 +#define HDW 0x08 +#define VDW 0x0c +#define PPLN 0x10 +#define LPFR 0x14 +#define SPH 0x18 +#define LNH 0x1c +#define SLV0 0x20 +#define SLV1 0x24 +#define LNV 0x28 +#define CULH 0x2c +#define CULV 0x30 +#define HSIZE 0x34 +#define SDOFST 0x38 +#define CADU 0x3c +#define CADL 0x40 +#define LINCFG0 0x44 +#define LINCFG1 0x48 +#define CCOLP 0x4c +#define CRGAIN 0x50 +#define CGRGAIN 0x54 +#define CGBGAIN 0x58 +#define CBGAIN 0x5c +#define COFSTA 0x60 +#define FLSHCFG0 0x64 +#define FLSHCFG1 0x68 +#define FLSHCFG2 0x6c +#define VDINT0 0x70 +#define VDINT1 0x74 +#define VDINT2 0x78 +#define MISC 0x7c +#define CGAMMAWD 0x80 +#define REC656IF 0x84 +#define CCDCFG 0x88 +/***************************************************** +* Defect Correction registers +*****************************************************/ +#define DFCCTL 0x8c +#define VDFSATLV 0x90 +#define DFCMEMCTL 0x94 +#define DFCMEM0 0x98 +#define DFCMEM1 0x9c +#define DFCMEM2 0xa0 +#define DFCMEM3 0xa4 +#define DFCMEM4 0xa8 +/**************************************************** +* Black Clamp registers +****************************************************/ +#define CLAMPCFG 0xac +#define CLDCOFST 0xb0 +#define CLSV 0xb4 +#define CLHWIN0 0xb8 +#define CLHWIN1 0xbc +#define CLHWIN2 0xc0 +#define CLVRV 0xc4 +#define CLVWIN0 0xc8 +#define CLVWIN1 0xcc +#define CLVWIN2 0xd0 +#define CLVWIN3 0xd4 +/**************************************************** +* Lense Shading Correction +****************************************************/ +#define DATAHOFST 0xd8 +#define DATAVOFST 0xdc +#define LSCHVAL 0xe0 +#define LSCVVAL 0xe4 +#define TWODLSCCFG 0xe8 +#define TWODLSCOFST 0xec +#define TWODLSCINI 0xf0 +#define TWODLSCGRBU 0xf4 +#define TWODLSCGRBL 0xf8 +#define TWODLSCGROF 0xfc +#define TWODLSCORBU 0x100 +#define TWODLSCORBL 0x104 +#define TWODLSCOROF 0x108 +#define TWODLSCIRQEN 0x10c +#define TWODLSCIRQST 0x110 +/**************************************************** +* Data formatter +****************************************************/ +#define FMTCFG 0x114 +#define FMTPLEN 0x118 +#define FMTSPH 0x11c +#define FMTLNH 0x120 +#define FMTSLV 0x124 +#define FMTLNV 0x128 +#define FMTRLEN 0x12c +#define FMTHCNT 0x130 +#define FMTAPTR_BASE 0x134 +/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */ +#define FMTAPTR(i) (FMTAPTR_BASE + (i * 4)) +#define FMTPGMVF0 0x174 +#define FMTPGMVF1 0x178 +#define FMTPGMAPU0 0x17c +#define FMTPGMAPU1 0x180 +#define FMTPGMAPS0 0x184 +#define FMTPGMAPS1 0x188 +#define FMTPGMAPS2 0x18c +#define FMTPGMAPS3 0x190 +#define FMTPGMAPS4 0x194 +#define FMTPGMAPS5 0x198 +#define FMTPGMAPS6 0x19c +#define FMTPGMAPS7 0x1a0 +/************************************************ +* Color Space Converter +************************************************/ +#define CSCCTL 0x1a4 +#define CSCM0 0x1a8 +#define CSCM1 0x1ac +#define CSCM2 0x1b0 +#define CSCM3 0x1b4 +#define CSCM4 0x1b8 +#define CSCM5 0x1bc +#define CSCM6 0x1c0 +#define CSCM7 0x1c4 +#define OBWIN0 0x1c8 +#define OBWIN1 0x1cc +#define OBWIN2 0x1d0 +#define OBWIN3 0x1d4 +#define OBVAL0 0x1d8 +#define OBVAL1 0x1dc +#define OBVAL2 0x1e0 +#define OBVAL3 0x1e4 +#define OBVAL4 0x1e8 +#define OBVAL5 0x1ec +#define OBVAL6 0x1f0 +#define OBVAL7 0x1f4 +#define CLKCTL 0x1f8 + +/* Masks & Shifts below */ +#define START_PX_HOR_MASK 0x7FFF +#define NUM_PX_HOR_MASK 0x7FFF +#define START_VER_ONE_MASK 0x7FFF +#define START_VER_TWO_MASK 0x7FFF +#define NUM_LINES_VER 0x7FFF + +/* gain - offset masks */ +#define GAIN_INTEGER_SHIFT 9 +#define OFFSET_MASK 0xFFF +#define GAIN_SDRAM_EN_SHIFT 12 +#define GAIN_IPIPE_EN_SHIFT 13 +#define GAIN_H3A_EN_SHIFT 14 +#define OFST_SDRAM_EN_SHIFT 8 +#define OFST_IPIPE_EN_SHIFT 9 +#define OFST_H3A_EN_SHIFT 10 +#define GAIN_OFFSET_EN_MASK 0x7700 + +/* Culling */ +#define CULL_PAT_EVEN_LINE_SHIFT 8 + +/* CCDCFG register */ +#define ISIF_YCINSWP_RAW (0x00 << 4) +#define ISIF_YCINSWP_YCBCR (0x01 << 4) +#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC (0x00 << 6) +#define ISIF_CCDCFG_WENLOG_AND (0x00 << 8) +#define ISIF_CCDCFG_TRGSEL_WEN (0x00 << 9) +#define ISIF_CCDCFG_EXTRG_DISABLE (0x00 << 10) +#define ISIF_LATCH_ON_VSYNC_DISABLE (0x01 << 15) +#define ISIF_LATCH_ON_VSYNC_ENABLE (0x00 << 15) +#define ISIF_DATA_PACK_MASK 3 +#define ISIF_DATA_PACK16 0 +#define ISIF_DATA_PACK12 1 +#define ISIF_DATA_PACK8 2 +#define ISIF_PIX_ORDER_SHIFT 11 +#define ISIF_BW656_ENABLE (0x01 << 5) + +/* MODESET registers */ +#define ISIF_VDHDOUT_INPUT (0x00 << 0) +#define ISIF_INPUT_SHIFT 12 +#define ISIF_RAW_INPUT_MODE 0 +#define ISIF_FID_POL_SHIFT 4 +#define ISIF_HD_POL_SHIFT 3 +#define ISIF_VD_POL_SHIFT 2 +#define ISIF_DATAPOL_NORMAL 0 +#define ISIF_DATAPOL_SHIFT 6 +#define ISIF_EXWEN_DISABLE 0 +#define ISIF_EXWEN_SHIFT 5 +#define ISIF_FRM_FMT_SHIFT 7 +#define ISIF_DATASFT_SHIFT 8 +#define ISIF_LPF_SHIFT 14 +#define ISIF_LPF_MASK 1 + +/* GAMMAWD registers */ +#define ISIF_ALAW_GAMA_WD_MASK 0xF +#define ISIF_ALAW_GAMA_WD_SHIFT 1 +#define ISIF_ALAW_ENABLE 1 +#define ISIF_GAMMAWD_CFA_SHIFT 5 + +/* HSIZE registers */ +#define ISIF_HSIZE_FLIP_MASK 1 +#define ISIF_HSIZE_FLIP_SHIFT 12 + +/* MISC registers */ +#define ISIF_DPCM_EN_SHIFT 12 +#define ISIF_DPCM_PREDICTOR_SHIFT 13 + +/* Black clamp related */ +#define ISIF_BC_MODE_COLOR_SHIFT 4 +#define ISIF_HORZ_BC_MODE_SHIFT 1 +#define ISIF_HORZ_BC_WIN_SEL_SHIFT 5 +#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT 6 +#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT 8 +#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT 12 +#define ISIF_VERT_BC_RST_VAL_SEL_SHIFT 4 +#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT 8 + +/* VDFC registers */ +#define ISIF_VDFC_EN_SHIFT 4 +#define ISIF_VDFC_CORR_MOD_SHIFT 5 +#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT 7 +#define ISIF_VDFC_LEVEL_SHFT_SHIFT 8 +#define ISIF_VDFC_POS_MASK 0x1FFF +#define ISIF_DFCMEMCTL_DFCMARST_SHIFT 2 + +/* CSC registers */ +#define ISIF_CSC_COEF_INTEG_MASK 7 +#define ISIF_CSC_COEF_DECIMAL_MASK 0x1f +#define ISIF_CSC_COEF_INTEG_SHIFT 5 +#define ISIF_CSCM_MSB_SHIFT 8 +#define ISIF_DF_CSC_SPH_MASK 0x1FFF +#define ISIF_DF_CSC_LNH_MASK 0x1FFF +#define ISIF_DF_CSC_SLV_MASK 0x1FFF +#define ISIF_DF_CSC_LNV_MASK 0x1FFF +#define ISIF_DF_NUMLINES 0x7FFF +#define ISIF_DF_NUMPIX 0x1FFF + +/* Offsets for LSC/DFC/Gain */ +#define ISIF_DATA_H_OFFSET_MASK 0x1FFF +#define ISIF_DATA_V_OFFSET_MASK 0x1FFF + +/* Linearization */ +#define ISIF_LIN_CORRSFT_SHIFT 4 +#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT 10 + + +/* Pattern registers */ +#define ISIF_PG_EN (1 << 3) +#define ISIF_SEL_PG_SRC (3 << 4) +#define ISIF_PG_VD_POL_SHIFT 0 +#define ISIF_PG_HD_POL_SHIFT 1 + +/*random other junk*/ +#define ISIF_SYNCEN_VDHDEN_MASK (1 << 0) +#define ISIF_SYNCEN_WEN_MASK (1 << 1) +#define ISIF_SYNCEN_WEN_SHIFT 1 + +#endif diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c new file mode 100644 index 00000000000..c4a82a1a8a9 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe.c @@ -0,0 +1,886 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/wait.h> +#include <linux/time.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe.h> +#include <media/davinci/vpss.h> +#include <media/davinci/vpbe_venc.h> + +#define VPBE_DEFAULT_OUTPUT "Composite" +#define VPBE_DEFAULT_MODE "ntsc" + +static char *def_output = VPBE_DEFAULT_OUTPUT; +static char *def_mode = VPBE_DEFAULT_MODE; +static int debug; + +module_param(def_output, charp, S_IRUGO); +module_param(def_mode, charp, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)"); +MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("TI DMXXX VPBE Display controller"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/** + * vpbe_current_encoder_info - Get config info for current encoder + * @vpbe_dev - vpbe device ptr + * + * Return ptr to current encoder config info + */ +static struct encoder_config_info* +vpbe_current_encoder_info(struct vpbe_device *vpbe_dev) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int index = vpbe_dev->current_sd_index; + + return ((index == 0) ? &cfg->venc : + &cfg->ext_encoders[index-1]); +} + +/** + * vpbe_find_encoder_sd_index - Given a name find encoder sd index + * + * @vpbe_config - ptr to vpbe cfg + * @output_index - index used by application + * + * Return sd index of the encoder + */ +static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg, + int index) +{ + char *encoder_name = cfg->outputs[index].subdev_name; + int i; + + /* Venc is always first */ + if (!strcmp(encoder_name, cfg->venc.module_name)) + return 0; + + for (i = 0; i < cfg->num_ext_encoders; i++) { + if (!strcmp(encoder_name, + cfg->ext_encoders[i].module_name)) + return i+1; + } + + return -EINVAL; +} + +/** + * vpbe_g_cropcap - Get crop capabilities of the display + * @vpbe_dev - vpbe device ptr + * @cropcap - cropcap is a ptr to struct v4l2_cropcap + * + * Update the crop capabilities in crop cap for current + * mode + */ +static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev, + struct v4l2_cropcap *cropcap) +{ + if (NULL == cropcap) + return -EINVAL; + cropcap->bounds.left = 0; + cropcap->bounds.top = 0; + cropcap->bounds.width = vpbe_dev->current_timings.xres; + cropcap->bounds.height = vpbe_dev->current_timings.yres; + cropcap->defrect = cropcap->bounds; + + return 0; +} + +/** + * vpbe_enum_outputs - enumerate outputs + * @vpbe_dev - vpbe device ptr + * @output - ptr to v4l2_output structure + * + * Enumerates the outputs available at the vpbe display + * returns the status, -EINVAL if end of output list + */ +static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev, + struct v4l2_output *output) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int temp_index = output->index; + + if (temp_index >= cfg->num_outputs) + return -EINVAL; + + *output = cfg->outputs[temp_index].output; + output->index = temp_index; + + return 0; +} + +static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode, + int output_index) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = output_index; + int i; + + if (NULL == mode) + return -EINVAL; + + for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if (!strcmp(mode, var.name)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info *mode_info) +{ + if (NULL == mode_info) + return -EINVAL; + + *mode_info = vpbe_dev->current_timings; + + return 0; +} + +static int vpbe_get_dv_preset_info(struct vpbe_device *vpbe_dev, + unsigned int dv_preset) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if ((var.timings_type & VPBE_ENC_DV_PRESET) && + (var.timings.dv_preset == dv_preset)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +/* Get std by std id */ +static int vpbe_get_std_info(struct vpbe_device *vpbe_dev, + v4l2_std_id std_id) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if ((var.timings_type & VPBE_ENC_STD) && + (var.timings.std_id & std_id)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev, + char *std_name) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if (!strcmp(var.name, std_name)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +/** + * vpbe_set_output - Set output + * @vpbe_dev - vpbe device ptr + * @index - index of output + * + * Set vpbe output to the output specified by the index + */ +static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) +{ + struct encoder_config_info *curr_enc_info = + vpbe_current_encoder_info(vpbe_dev); + struct vpbe_config *cfg = vpbe_dev->cfg; + struct venc_platform_data *venc_device = vpbe_dev->venc_device; + enum v4l2_mbus_pixelcode if_params; + int enc_out_index; + int sd_index; + int ret = 0; + + if (index >= cfg->num_outputs) + return -EINVAL; + + mutex_lock(&vpbe_dev->lock); + + sd_index = vpbe_dev->current_sd_index; + enc_out_index = cfg->outputs[index].output.index; + /* + * Currently we switch the encoder based on output selected + * by the application. If media controller is implemented later + * there is will be an API added to setup_link between venc + * and external encoder. So in that case below comparison always + * match and encoder will not be switched. But if application + * chose not to use media controller, then this provides current + * way of switching encoder at the venc output. + */ + if (strcmp(curr_enc_info->module_name, + cfg->outputs[index].subdev_name)) { + /* Need to switch the encoder at the output */ + sd_index = vpbe_find_encoder_sd_index(cfg, index); + if (sd_index < 0) { + ret = -EINVAL; + goto out; + } + + if_params = cfg->outputs[index].if_params; + venc_device->setup_if_config(if_params); + if (ret) + goto out; + } + + /* Set output at the encoder */ + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_routing, 0, enc_out_index, 0); + if (ret) + goto out; + + /* + * It is assumed that venc or extenal encoder will set a default + * mode in the sub device. For external encoder or LCD pannel output, + * we also need to set up the lcd port for the required mode. So setup + * the lcd port for the default mode that is configured in the board + * arch/arm/mach-davinci/board-dm355-evm.setup file for the external + * encoder. + */ + ret = vpbe_get_mode_info(vpbe_dev, + cfg->outputs[index].default_mode, index); + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + vpbe_dev->current_sd_index = sd_index; + vpbe_dev->current_out_index = index; + } +out: + mutex_unlock(&vpbe_dev->lock); + return ret; +} + +static int vpbe_set_default_output(struct vpbe_device *vpbe_dev) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int ret = 0; + int i; + + for (i = 0; i < cfg->num_outputs; i++) { + if (!strcmp(def_output, + cfg->outputs[i].output.name)) { + ret = vpbe_set_output(vpbe_dev, i); + if (!ret) + vpbe_dev->current_out_index = i; + return ret; + } + } + return ret; +} + +/** + * vpbe_get_output - Get output + * @vpbe_dev - vpbe device ptr + * + * return current vpbe output to the the index + */ +static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev) +{ + return vpbe_dev->current_out_index; +} + +/** + * vpbe_s_dv_preset - Set the given preset timings in the encoder + * + * Sets the preset if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev, + struct v4l2_dv_preset *dv_preset) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + int sd_index = vpbe_dev->current_sd_index; + int ret; + + + if (!(cfg->outputs[out_index].output.capabilities & + V4L2_OUT_CAP_PRESETS)) + return -EINVAL; + + ret = vpbe_get_dv_preset_info(vpbe_dev, dv_preset->preset); + + if (ret) + return ret; + + mutex_lock(&vpbe_dev->lock); + + + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_dv_preset, dv_preset); + if (!ret && (vpbe_dev->amp != NULL)) { + /* Call amplifier subdevice */ + ret = v4l2_subdev_call(vpbe_dev->amp, video, + s_dv_preset, dv_preset); + } + /* set the lcd controller output for the given mode */ + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + } + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +/** + * vpbe_g_dv_preset - Get the preset in the current encoder + * + * Get the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_g_dv_preset(struct vpbe_device *vpbe_dev, + struct v4l2_dv_preset *dv_preset) +{ + if (vpbe_dev->current_timings.timings_type & + VPBE_ENC_DV_PRESET) { + dv_preset->preset = vpbe_dev->current_timings.timings.dv_preset; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_enum_dv_presets - Enumerate the dv presets in the current encoder + * + * Get the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_enum_dv_presets(struct vpbe_device *vpbe_dev, + struct v4l2_dv_enum_preset *preset_info) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + struct vpbe_output *output = &cfg->outputs[out_index]; + int j = 0; + int i; + + if (!(output->output.capabilities & V4L2_OUT_CAP_PRESETS)) + return -EINVAL; + + for (i = 0; i < output->num_modes; i++) { + if (output->modes[i].timings_type == VPBE_ENC_DV_PRESET) { + if (j == preset_info->index) + break; + j++; + } + } + + if (i == output->num_modes) + return -EINVAL; + + return v4l_fill_dv_preset_info(output->modes[i].timings.dv_preset, + preset_info); +} + +/** + * vpbe_s_std - Set the given standard in the encoder + * + * Sets the standard if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + int sd_index = vpbe_dev->current_sd_index; + int ret; + + if (!(cfg->outputs[out_index].output.capabilities & + V4L2_OUT_CAP_STD)) + return -EINVAL; + + ret = vpbe_get_std_info(vpbe_dev, *std_id); + if (ret) + return ret; + + mutex_lock(&vpbe_dev->lock); + + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_std_output, *std_id); + /* set the lcd controller output for the given mode */ + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + } + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +/** + * vpbe_g_std - Get the standard in the current encoder + * + * Get the standard in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id) +{ + struct vpbe_enc_mode_info cur_timings = vpbe_dev->current_timings; + + if (cur_timings.timings_type & VPBE_ENC_STD) { + *std_id = cur_timings.timings.std_id; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_set_mode - Set mode in the current encoder using mode info + * + * Use the mode string to decide what timings to set in the encoder + * This is typically useful when fbset command is used to change the current + * timings by specifying a string to indicate the timings. + */ +static int vpbe_set_mode(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info *mode_info) +{ + struct vpbe_enc_mode_info *preset_mode = NULL; + struct vpbe_config *cfg = vpbe_dev->cfg; + struct v4l2_dv_preset dv_preset; + struct osd_state *osd_device; + int out_index = vpbe_dev->current_out_index; + int ret = 0; + int i; + + if ((NULL == mode_info) || (NULL == mode_info->name)) + return -EINVAL; + + for (i = 0; i < cfg->outputs[out_index].num_modes; i++) { + if (!strcmp(mode_info->name, + cfg->outputs[out_index].modes[i].name)) { + preset_mode = &cfg->outputs[out_index].modes[i]; + /* + * it may be one of the 3 timings type. Check and + * invoke right API + */ + if (preset_mode->timings_type & VPBE_ENC_STD) + return vpbe_s_std(vpbe_dev, + &preset_mode->timings.std_id); + if (preset_mode->timings_type & VPBE_ENC_DV_PRESET) { + dv_preset.preset = + preset_mode->timings.dv_preset; + return vpbe_s_dv_preset(vpbe_dev, &dv_preset); + } + } + } + + /* Only custom timing should reach here */ + if (preset_mode == NULL) + return -EINVAL; + + mutex_lock(&vpbe_dev->lock); + + osd_device = vpbe_dev->osd_device; + vpbe_dev->current_timings = *preset_mode; + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev) +{ + int ret; + + ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode); + if (ret) + return ret; + + /* set the default mode in the encoder */ + return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings); +} + +static int platform_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpbe_device *vpbe_dev = data; + + if (strcmp("vpbe-osd", pdev->name) == 0) + vpbe_dev->osd_device = platform_get_drvdata(pdev); + if (strcmp("vpbe-venc", pdev->name) == 0) + vpbe_dev->venc_device = dev_get_platdata(&pdev->dev); + + return 0; +} + +/** + * vpbe_initialize() - Initialize the vpbe display controller + * @vpbe_dev - vpbe device ptr + * + * Master frame buffer device drivers calls this to initialize vpbe + * display controller. This will then registers v4l2 device and the sub + * devices and sets a current encoder sub device for display. v4l2 display + * device driver is the master and frame buffer display device driver is + * the slave. Frame buffer display driver checks the initialized during + * probe and exit if not initialized. Returns status. + */ +static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) +{ + struct encoder_config_info *enc_info; + struct amp_config_info *amp_info; + struct v4l2_subdev **enc_subdev; + struct osd_state *osd_device; + struct i2c_adapter *i2c_adap; + int output_index; + int num_encoders; + int ret = 0; + int err; + int i; + + /* + * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer + * from the platform device by iteration of platform drivers and + * matching with device name + */ + if (NULL == vpbe_dev || NULL == dev) { + printk(KERN_ERR "Null device pointers.\n"); + return -ENODEV; + } + + if (vpbe_dev->initialized) + return 0; + + mutex_lock(&vpbe_dev->lock); + + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { + /* We have dac clock available for platform */ + vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac"); + if (IS_ERR(vpbe_dev->dac_clk)) { + ret = PTR_ERR(vpbe_dev->dac_clk); + goto vpbe_unlock; + } + if (clk_enable(vpbe_dev->dac_clk)) { + ret = -ENODEV; + goto vpbe_unlock; + } + } + + /* first enable vpss clocks */ + vpss_enable_clock(VPSS_VPBE_CLOCK, 1); + + /* First register a v4l2 device */ + ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev); + if (ret) { + v4l2_err(dev->driver, + "Unable to register v4l2 device.\n"); + goto vpbe_fail_clock; + } + v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n"); + + err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev, + platform_device_get); + if (err < 0) + return err; + + vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev, + vpbe_dev->cfg->venc.module_name); + /* register venc sub device */ + if (vpbe_dev->venc == NULL) { + v4l2_err(&vpbe_dev->v4l2_dev, + "vpbe unable to init venc sub device\n"); + ret = -ENODEV; + goto vpbe_fail_v4l2_device; + } + /* initialize osd device */ + osd_device = vpbe_dev->osd_device; + + if (NULL != osd_device->ops.initialize) { + err = osd_device->ops.initialize(osd_device); + if (err) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to initialize the OSD device"); + err = -ENOMEM; + goto vpbe_fail_v4l2_device; + } + } + + /* + * Register any external encoders that are configured. At index 0 we + * store venc sd index. + */ + num_encoders = vpbe_dev->cfg->num_ext_encoders + 1; + vpbe_dev->encoders = kmalloc( + sizeof(struct v4l2_subdev *)*num_encoders, + GFP_KERNEL); + if (NULL == vpbe_dev->encoders) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to allocate memory for encoders sub devices"); + ret = -ENOMEM; + goto vpbe_fail_v4l2_device; + } + + i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id); + for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) { + if (i == 0) { + /* venc is at index 0 */ + enc_subdev = &vpbe_dev->encoders[i]; + *enc_subdev = vpbe_dev->venc; + continue; + } + enc_info = &vpbe_dev->cfg->ext_encoders[i]; + if (enc_info->is_i2c) { + enc_subdev = &vpbe_dev->encoders[i]; + *enc_subdev = v4l2_i2c_new_subdev_board( + &vpbe_dev->v4l2_dev, i2c_adap, + &enc_info->board_info, NULL); + if (*enc_subdev) + v4l2_info(&vpbe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + enc_info->module_name); + else { + v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s" + " failed to register", + enc_info->module_name); + ret = -ENODEV; + goto vpbe_fail_sd_register; + } + } else + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders" + " currently not supported"); + } + /* Add amplifier subdevice for dm365 */ + if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) && + vpbe_dev->cfg->amp != NULL) { + amp_info = vpbe_dev->cfg->amp; + if (amp_info->is_i2c) { + vpbe_dev->amp = v4l2_i2c_new_subdev_board( + &vpbe_dev->v4l2_dev, i2c_adap, + &_info->board_info, NULL); + if (!vpbe_dev->amp) { + v4l2_err(&vpbe_dev->v4l2_dev, + "amplifier %s failed to register", + amp_info->module_name); + ret = -ENODEV; + goto vpbe_fail_amp_register; + } + v4l2_info(&vpbe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + amp_info->module_name); + } else { + vpbe_dev->amp = NULL; + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers" + " currently not supported"); + } + } else { + vpbe_dev->amp = NULL; + } + + /* set the current encoder and output to that of venc by default */ + vpbe_dev->current_sd_index = 0; + vpbe_dev->current_out_index = 0; + output_index = 0; + + mutex_unlock(&vpbe_dev->lock); + + printk(KERN_NOTICE "Setting default output to %s\n", def_output); + ret = vpbe_set_default_output(vpbe_dev); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s", + def_output); + return ret; + } + + printk(KERN_NOTICE "Setting default mode to %s\n", def_mode); + ret = vpbe_set_default_mode(vpbe_dev); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s", + def_mode); + return ret; + } + vpbe_dev->initialized = 1; + /* TBD handling of bootargs for default output and mode */ + return 0; + +vpbe_fail_amp_register: + kfree(vpbe_dev->amp); +vpbe_fail_sd_register: + kfree(vpbe_dev->encoders); +vpbe_fail_v4l2_device: + v4l2_device_unregister(&vpbe_dev->v4l2_dev); +vpbe_fail_clock: + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) + clk_put(vpbe_dev->dac_clk); +vpbe_unlock: + mutex_unlock(&vpbe_dev->lock); + return ret; +} + +/** + * vpbe_deinitialize() - de-initialize the vpbe display controller + * @dev - Master and slave device ptr + * + * vpbe_master and slave frame buffer devices calls this to de-initialize + * the display controller. It is called when master and slave device + * driver modules are removed and no longer requires the display controller. + */ +static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev) +{ + v4l2_device_unregister(&vpbe_dev->v4l2_dev); + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) + clk_put(vpbe_dev->dac_clk); + + kfree(vpbe_dev->amp); + kfree(vpbe_dev->encoders); + vpbe_dev->initialized = 0; + /* disable vpss clocks */ + vpss_enable_clock(VPSS_VPBE_CLOCK, 0); +} + +static struct vpbe_device_ops vpbe_dev_ops = { + .g_cropcap = vpbe_g_cropcap, + .enum_outputs = vpbe_enum_outputs, + .set_output = vpbe_set_output, + .get_output = vpbe_get_output, + .s_dv_preset = vpbe_s_dv_preset, + .g_dv_preset = vpbe_g_dv_preset, + .enum_dv_presets = vpbe_enum_dv_presets, + .s_std = vpbe_s_std, + .g_std = vpbe_g_std, + .initialize = vpbe_initialize, + .deinitialize = vpbe_deinitialize, + .get_mode_info = vpbe_get_current_mode_info, + .set_mode = vpbe_set_mode, +}; + +static __devinit int vpbe_probe(struct platform_device *pdev) +{ + struct vpbe_device *vpbe_dev; + struct vpbe_config *cfg; + int ret = -EINVAL; + + if (pdev->dev.platform_data == NULL) { + v4l2_err(pdev->dev.driver, "No platform data\n"); + return -ENODEV; + } + cfg = pdev->dev.platform_data; + + if (!cfg->module_name[0] || + !cfg->osd.module_name[0] || + !cfg->venc.module_name[0]) { + v4l2_err(pdev->dev.driver, "vpbe display module names not" + " defined\n"); + return ret; + } + + vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL); + if (vpbe_dev == NULL) { + v4l2_err(pdev->dev.driver, "Unable to allocate memory" + " for vpbe_device\n"); + return -ENOMEM; + } + vpbe_dev->cfg = cfg; + vpbe_dev->ops = vpbe_dev_ops; + vpbe_dev->pdev = &pdev->dev; + + if (cfg->outputs->num_modes > 0) + vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0]; + else { + kfree(vpbe_dev); + return -ENODEV; + } + + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpbe_dev); + mutex_init(&vpbe_dev->lock); + + return 0; +} + +static int vpbe_remove(struct platform_device *device) +{ + struct vpbe_device *vpbe_dev = platform_get_drvdata(device); + + kfree(vpbe_dev); + + return 0; +} + +static struct platform_driver vpbe_driver = { + .driver = { + .name = "vpbe_controller", + .owner = THIS_MODULE, + }, + .probe = vpbe_probe, + .remove = vpbe_remove, +}; + +module_platform_driver(vpbe_driver); diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c new file mode 100644 index 00000000000..9a05c817462 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_display.c @@ -0,0 +1,1838 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/wait.h> +#include <linux/time.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/mm.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <linux/slab.h> + +#include <asm/pgtable.h> +#include <mach/cputype.h> + +#include <media/v4l2-dev.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_display.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpbe_osd.h> +#include "vpbe_venc_regs.h" + +#define VPBE_DISPLAY_DRIVER "vpbe-v4l2" + +static int debug; + +#define VPBE_DEFAULT_NUM_BUFS 3 + +module_param(debug, int, 0644); + +static int venc_is_second_field(struct vpbe_display *disp_dev) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int ret; + int val; + + ret = v4l2_subdev_call(vpbe_dev->venc, + core, + ioctl, + VENC_GET_FLD, + &val); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in getting Field ID 0\n"); + } + return val; +} + +static void vpbe_isr_even_field(struct vpbe_display *disp_obj, + struct vpbe_layer *layer) +{ + struct timespec timevalue; + + if (layer->cur_frm == layer->next_frm) + return; + ktime_get_ts(&timevalue); + layer->cur_frm->ts.tv_sec = timevalue.tv_sec; + layer->cur_frm->ts.tv_usec = timevalue.tv_nsec / NSEC_PER_USEC; + layer->cur_frm->state = VIDEOBUF_DONE; + wake_up_interruptible(&layer->cur_frm->done); + /* Make cur_frm pointing to next_frm */ + layer->cur_frm = layer->next_frm; +} + +static void vpbe_isr_odd_field(struct vpbe_display *disp_obj, + struct vpbe_layer *layer) +{ + struct osd_state *osd_device = disp_obj->osd_device; + unsigned long addr; + + spin_lock(&disp_obj->dma_queue_lock); + if (list_empty(&layer->dma_queue) || + (layer->cur_frm != layer->next_frm)) { + spin_unlock(&disp_obj->dma_queue_lock); + return; + } + /* + * one field is displayed configure + * the next frame if it is available + * otherwise hold on current frame + * Get next from the buffer queue + */ + layer->next_frm = list_entry( + layer->dma_queue.next, + struct videobuf_buffer, + queue); + /* Remove that from the buffer queue */ + list_del(&layer->next_frm->queue); + spin_unlock(&disp_obj->dma_queue_lock); + /* Mark state of the frame to active */ + layer->next_frm->state = VIDEOBUF_ACTIVE; + addr = videobuf_to_dma_contig(layer->next_frm); + osd_device->ops.start_layer(osd_device, + layer->layer_info.id, + addr, + disp_obj->cbcr_ofst); +} + +/* interrupt service routine */ +static irqreturn_t venc_isr(int irq, void *arg) +{ + struct vpbe_display *disp_dev = (struct vpbe_display *)arg; + struct vpbe_layer *layer; + static unsigned last_event; + unsigned event = 0; + int fid; + int i; + + if ((NULL == arg) || (NULL == disp_dev->dev[0])) + return IRQ_HANDLED; + + if (venc_is_second_field(disp_dev)) + event |= VENC_SECOND_FIELD; + else + event |= VENC_FIRST_FIELD; + + if (event == (last_event & ~VENC_END_OF_FRAME)) { + /* + * If the display is non-interlaced, then we need to flag the + * end-of-frame event at every interrupt regardless of the + * value of the FIDST bit. We can conclude that the display is + * non-interlaced if the value of the FIDST bit is unchanged + * from the previous interrupt. + */ + event |= VENC_END_OF_FRAME; + } else if (event == VENC_SECOND_FIELD) { + /* end-of-frame for interlaced display */ + event |= VENC_END_OF_FRAME; + } + last_event = event; + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + layer = disp_dev->dev[i]; + /* If streaming is started in this layer */ + if (!layer->started) + continue; + + if (layer->layer_first_int) { + layer->layer_first_int = 0; + continue; + } + /* Check the field format */ + if ((V4L2_FIELD_NONE == layer->pix_fmt.field) && + (event & VENC_END_OF_FRAME)) { + /* Progressive mode */ + + vpbe_isr_even_field(disp_dev, layer); + vpbe_isr_odd_field(disp_dev, layer); + } else { + /* Interlaced mode */ + + layer->field_id ^= 1; + if (event & VENC_FIRST_FIELD) + fid = 0; + else + fid = 1; + + /* + * If field id does not match with store + * field id + */ + if (fid != layer->field_id) { + /* Make them in sync */ + layer->field_id = fid; + continue; + } + /* + * device field id and local field id are + * in sync. If this is even field + */ + if (0 == fid) + vpbe_isr_even_field(disp_dev, layer); + else /* odd field */ + vpbe_isr_odd_field(disp_dev, layer); + } + } + + return IRQ_HANDLED; +} + +/* + * vpbe_buffer_prepare() + * This is the callback function called from videobuf_qbuf() function + * the buffer is prepared and user space virtual address is converted into + * physical address + */ +static int vpbe_buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned long addr; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_prepare\n"); + + /* If buffer is not initialized, initialize it */ + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = layer->pix_fmt.width; + vb->height = layer->pix_fmt.height; + vb->size = layer->pix_fmt.sizeimage; + vb->field = field; + + ret = videobuf_iolock(q, vb, NULL); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \ + user address\n"); + return -EINVAL; + } + + addr = videobuf_to_dma_contig(vb); + + if (q->streaming) { + if (!IS_ALIGNED(addr, 8)) { + v4l2_err(&vpbe_dev->v4l2_dev, + "buffer_prepare:offset is \ + not aligned to 32 bytes\n"); + return -EINVAL; + } + } + vb->state = VIDEOBUF_PREPARED; + } + return 0; +} + +/* + * vpbe_buffer_setup() + * This function allocates memory for the buffers + */ +static int vpbe_buffer_setup(struct videobuf_queue *q, + unsigned int *count, + unsigned int *size) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n"); + + *size = layer->pix_fmt.sizeimage; + + /* Store number of buffers allocated in numbuffer member */ + if (*count < VPBE_DEFAULT_NUM_BUFS) + *count = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS; + + return 0; +} + +/* + * vpbe_buffer_queue() + * This function adds the buffer to DMA queue + */ +static void vpbe_buffer_queue(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&disp->dma_queue_lock, flags); + list_add_tail(&vb->queue, &layer->dma_queue); + spin_unlock_irqrestore(&disp->dma_queue_lock, flags); + /* Change state of the buffer */ + vb->state = VIDEOBUF_QUEUED; +} + +/* + * vpbe_buffer_release() + * This function is called from the videobuf layer to free memory allocated to + * the buffers + */ +static void vpbe_buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_release\n"); + + if (V4L2_MEMORY_USERPTR != layer->memory) + videobuf_dma_contig_free(q, vb); + + vb->state = VIDEOBUF_NEEDS_INIT; +} + +static struct videobuf_queue_ops video_qops = { + .buf_setup = vpbe_buffer_setup, + .buf_prepare = vpbe_buffer_prepare, + .buf_queue = vpbe_buffer_queue, + .buf_release = vpbe_buffer_release, +}; + +static +struct vpbe_layer* +_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev, + struct vpbe_layer *layer) +{ + enum vpbe_display_device_id thiswin, otherwin; + thiswin = layer->device_id; + + otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ? + VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0; + return disp_dev->dev[otherwin]; +} + +static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, + struct vpbe_layer *layer) +{ + struct osd_layer_config *cfg = &layer->layer_info.config; + struct osd_state *osd_device = disp_dev->osd_device; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + unsigned long addr; + int ret; + + addr = videobuf_to_dma_contig(layer->cur_frm); + /* Set address in the display registers */ + osd_device->ops.start_layer(osd_device, + layer->layer_info.id, + addr, + disp_dev->cbcr_ofst); + + ret = osd_device->ops.enable_layer(osd_device, + layer->layer_info.id, 0); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in enabling osd window layer 0\n"); + return -1; + } + + /* Enable the window */ + layer->layer_info.enable = 1; + if (cfg->pixfmt == PIXFMT_NV12) { + struct vpbe_layer *otherlayer = + _vpbe_display_get_other_win_layer(disp_dev, layer); + + ret = osd_device->ops.enable_layer(osd_device, + otherlayer->layer_info.id, 1); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in enabling osd window layer 1\n"); + return -1; + } + otherlayer->layer_info.enable = 1; + } + return 0; +} + +static void +vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev, + struct vpbe_layer *layer, + int expected_xsize, int expected_ysize) +{ + struct display_layer_info *layer_info = &layer->layer_info; + struct v4l2_pix_format *pixfmt = &layer->pix_fmt; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int calculated_xsize; + int h_exp = 0; + int v_exp = 0; + int h_scale; + int v_scale; + + v4l2_std_id standard_id = vpbe_dev->current_timings.timings.std_id; + + /* + * Application initially set the image format. Current display + * size is obtained from the vpbe display controller. expected_xsize + * and expected_ysize are set through S_CROP ioctl. Based on this, + * driver will calculate the scale factors for vertical and + * horizontal direction so that the image is displayed scaled + * and expanded. Application uses expansion to display the image + * in a square pixel. Otherwise it is displayed using displays + * pixel aspect ratio.It is expected that application chooses + * the crop coordinates for cropped or scaled display. if crop + * size is less than the image size, it is displayed cropped or + * it is displayed scaled and/or expanded. + * + * to begin with, set the crop window same as expected. Later we + * will override with scaled window size + */ + + cfg->xsize = pixfmt->width; + cfg->ysize = pixfmt->height; + layer_info->h_zoom = ZOOM_X1; /* no horizontal zoom */ + layer_info->v_zoom = ZOOM_X1; /* no horizontal zoom */ + layer_info->h_exp = H_EXP_OFF; /* no horizontal zoom */ + layer_info->v_exp = V_EXP_OFF; /* no horizontal zoom */ + + if (pixfmt->width < expected_xsize) { + h_scale = vpbe_dev->current_timings.xres / pixfmt->width; + if (h_scale < 2) + h_scale = 1; + else if (h_scale >= 4) + h_scale = 4; + else + h_scale = 2; + cfg->xsize *= h_scale; + if (cfg->xsize < expected_xsize) { + if ((standard_id & V4L2_STD_525_60) || + (standard_id & V4L2_STD_625_50)) { + calculated_xsize = (cfg->xsize * + VPBE_DISPLAY_H_EXP_RATIO_N) / + VPBE_DISPLAY_H_EXP_RATIO_D; + if (calculated_xsize <= expected_xsize) { + h_exp = 1; + cfg->xsize = calculated_xsize; + } + } + } + if (h_scale == 2) + layer_info->h_zoom = ZOOM_X2; + else if (h_scale == 4) + layer_info->h_zoom = ZOOM_X4; + if (h_exp) + layer_info->h_exp = H_EXP_9_OVER_8; + } else { + /* no scaling, only cropping. Set display area to crop area */ + cfg->xsize = expected_xsize; + } + + if (pixfmt->height < expected_ysize) { + v_scale = expected_ysize / pixfmt->height; + if (v_scale < 2) + v_scale = 1; + else if (v_scale >= 4) + v_scale = 4; + else + v_scale = 2; + cfg->ysize *= v_scale; + if (cfg->ysize < expected_ysize) { + if ((standard_id & V4L2_STD_625_50)) { + calculated_xsize = (cfg->ysize * + VPBE_DISPLAY_V_EXP_RATIO_N) / + VPBE_DISPLAY_V_EXP_RATIO_D; + if (calculated_xsize <= expected_ysize) { + v_exp = 1; + cfg->ysize = calculated_xsize; + } + } + } + if (v_scale == 2) + layer_info->v_zoom = ZOOM_X2; + else if (v_scale == 4) + layer_info->v_zoom = ZOOM_X4; + if (v_exp) + layer_info->h_exp = V_EXP_6_OVER_5; + } else { + /* no scaling, only cropping. Set display area to crop area */ + cfg->ysize = expected_ysize; + } + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "crop display xsize = %d, ysize = %d\n", + cfg->xsize, cfg->ysize); +} + +static void vpbe_disp_adj_position(struct vpbe_display *disp_dev, + struct vpbe_layer *layer, + int top, int left) +{ + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + + cfg->xpos = min((unsigned int)left, + vpbe_dev->current_timings.xres - cfg->xsize); + cfg->ypos = min((unsigned int)top, + vpbe_dev->current_timings.yres - cfg->ysize); + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "new xpos = %d, ypos = %d\n", + cfg->xpos, cfg->ypos); +} + +static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev, + struct v4l2_rect *c) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + + if ((c->width == 0) || + ((c->width + c->left) > vpbe_dev->current_timings.xres)) + c->width = vpbe_dev->current_timings.xres - c->left; + + if ((c->height == 0) || ((c->height + c->top) > + vpbe_dev->current_timings.yres)) + c->height = vpbe_dev->current_timings.yres - c->top; + + /* window height must be even for interlaced display */ + if (vpbe_dev->current_timings.interlaced) + c->height &= (~0x01); + +} + +/** + * vpbe_try_format() + * If user application provides width and height, and have bytesperline set + * to zero, driver calculates bytesperline and sizeimage based on hardware + * limits. + */ +static int vpbe_try_format(struct vpbe_display *disp_dev, + struct v4l2_pix_format *pixfmt, int check) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int min_height = 1; + int min_width = 32; + int max_height; + int max_width; + int bpp; + + if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) && + (pixfmt->pixelformat != V4L2_PIX_FMT_NV12)) + /* choose default as V4L2_PIX_FMT_UYVY */ + pixfmt->pixelformat = V4L2_PIX_FMT_UYVY; + + /* Check the field format */ + if ((pixfmt->field != V4L2_FIELD_INTERLACED) && + (pixfmt->field != V4L2_FIELD_NONE)) { + if (vpbe_dev->current_timings.interlaced) + pixfmt->field = V4L2_FIELD_INTERLACED; + else + pixfmt->field = V4L2_FIELD_NONE; + } + + if (pixfmt->field == V4L2_FIELD_INTERLACED) + min_height = 2; + + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + bpp = 1; + else + bpp = 2; + + max_width = vpbe_dev->current_timings.xres; + max_height = vpbe_dev->current_timings.yres; + + min_width /= bpp; + + if (!pixfmt->width || (pixfmt->width < min_width) || + (pixfmt->width > max_width)) { + pixfmt->width = vpbe_dev->current_timings.xres; + } + + if (!pixfmt->height || (pixfmt->height < min_height) || + (pixfmt->height > max_height)) { + pixfmt->height = vpbe_dev->current_timings.yres; + } + + if (pixfmt->bytesperline < (pixfmt->width * bpp)) + pixfmt->bytesperline = pixfmt->width * bpp; + + /* Make the bytesperline 32 byte aligned */ + pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31); + + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height + + (pixfmt->bytesperline * pixfmt->height >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + return 0; +} + +static int vpbe_display_g_priority(struct file *file, void *priv, + enum v4l2_priority *p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + + *p = v4l2_prio_max(&layer->prio); + + return 0; +} + +static int vpbe_display_s_priority(struct file *file, void *priv, + enum v4l2_priority p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + int ret; + + ret = v4l2_prio_change(&layer->prio, &fh->prio, p); + + return ret; +} + +static int vpbe_display_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + cap->version = VPBE_DISPLAY_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + strlcpy(cap->driver, VPBE_DISPLAY_DRIVER, sizeof(cap->driver)); + strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info)); + strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card)); + + return 0; +} + +static int vpbe_display_s_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct osd_state *osd_device = disp_dev->osd_device; + struct v4l2_rect *rect = &crop->c; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_S_CROP, layer id = %d\n", layer->device_id); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + if (rect->top < 0) + rect->top = 0; + if (rect->left < 0) + rect->left = 0; + + vpbe_disp_check_window_params(disp_dev, rect); + + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + + vpbe_disp_calculate_scale_factor(disp_dev, layer, + rect->width, + rect->height); + vpbe_disp_adj_position(disp_dev, layer, rect->top, + rect->left); + ret = osd_device->ops.set_layer_config(osd_device, + layer->layer_info.id, cfg); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in set layer config:\n"); + return -EINVAL; + } + + /* apply zooming and h or v expansion */ + osd_device->ops.set_zoom(osd_device, + layer->layer_info.id, + layer->layer_info.h_zoom, + layer->layer_info.v_zoom); + ret = osd_device->ops.set_vid_expansion(osd_device, + layer->layer_info.h_exp, + layer->layer_info.v_exp); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in set vid expansion:\n"); + return -EINVAL; + } + + if ((layer->layer_info.h_zoom != ZOOM_X1) || + (layer->layer_info.v_zoom != ZOOM_X1) || + (layer->layer_info.h_exp != H_EXP_OFF) || + (layer->layer_info.v_exp != V_EXP_OFF)) + /* Enable expansion filter */ + osd_device->ops.set_interpolation_filter(osd_device, 1); + else + osd_device->ops.set_interpolation_filter(osd_device, 0); + + return 0; +} + +static int vpbe_display_g_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = fh->disp_dev->osd_device; + struct v4l2_rect *rect = &crop->c; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_G_CROP, layer id = %d\n", + layer->device_id); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n"); + ret = -EINVAL; + } + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + rect->top = cfg->ypos; + rect->left = cfg->xpos; + rect->width = cfg->xsize; + rect->height = cfg->ysize; + + return 0; +} + +static int vpbe_display_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cropcap) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n"); + + cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + cropcap->bounds.left = 0; + cropcap->bounds.top = 0; + cropcap->bounds.width = vpbe_dev->current_timings.xres; + cropcap->bounds.height = vpbe_dev->current_timings.yres; + cropcap->pixelaspect = vpbe_dev->current_timings.aspect; + cropcap->defrect = cropcap->bounds; + return 0; +} + +static int vpbe_display_g_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_G_FMT, layer id = %d\n", + layer->device_id); + + /* If buffer type is video output */ + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + /* Fill in the information about format */ + fmt->fmt.pix = layer->pix_fmt; + + return 0; +} + +static int vpbe_display_enum_fmt(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned int index = 0; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_ENUM_FMT, layer id = %d\n", + layer->device_id); + if (fmt->index > 1) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + index = fmt->index; + memset(fmt, 0, sizeof(*fmt)); + fmt->index = index; + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + if (index == 0) { + strcpy(fmt->description, "YUV 4:2:2 - UYVY"); + fmt->pixelformat = V4L2_PIX_FMT_UYVY; + } else { + strcpy(fmt->description, "Y/CbCr 4:2:0"); + fmt->pixelformat = V4L2_PIX_FMT_NV12; + } + + return 0; +} + +static int vpbe_display_s_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + struct osd_state *osd_device = disp_dev->osd_device; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_S_FMT, layer id = %d\n", + layer->device_id); + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + /* Check for valid pixel format */ + ret = vpbe_try_format(disp_dev, pixfmt, 1); + if (ret) + return ret; + + /* YUV420 is requested, check availability of the + other video window */ + + layer->pix_fmt = *pixfmt; + + /* Get osd layer config */ + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + /* Store the pixel format in the layer object */ + cfg->xsize = pixfmt->width; + cfg->ysize = pixfmt->height; + cfg->line_length = pixfmt->bytesperline; + cfg->ypos = 0; + cfg->xpos = 0; + cfg->interlaced = vpbe_dev->current_timings.interlaced; + + if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat) + cfg->pixfmt = PIXFMT_YCbCrI; + + /* Change of the default pixel format for both video windows */ + if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) { + struct vpbe_layer *otherlayer; + cfg->pixfmt = PIXFMT_NV12; + otherlayer = _vpbe_display_get_other_win_layer(disp_dev, + layer); + otherlayer->layer_info.config.pixfmt = PIXFMT_NV12; + } + + /* Set the layer config in the osd window */ + ret = osd_device->ops.set_layer_config(osd_device, + layer->layer_info.id, cfg); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in S_FMT params:\n"); + return -EINVAL; + } + + /* Readback and fill the local copy of current pix format */ + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + + return 0; +} + +static int vpbe_display_try_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n"); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + + /* Check for valid field format */ + return vpbe_try_format(disp_dev, pixfmt, 0); + +} + +/** + * vpbe_display_s_std - Set the given standard in the encoder + * + * Sets the standard if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_display_s_std(struct file *file, void *priv, + v4l2_std_id *std_id) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n"); + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (NULL != vpbe_dev->ops.s_std) { + ret = vpbe_dev->ops.s_std(vpbe_dev, std_id); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set standard for sub devices\n"); + return -EINVAL; + } + } else { + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_g_std - Get the standard in the current encoder + * + * Get the standard in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_display_g_std(struct file *file, void *priv, + v4l2_std_id *std_id) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_STD\n"); + + /* Get the standard from the current encoder */ + if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) { + *std_id = vpbe_dev->current_timings.timings.std_id; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_display_enum_output - enumerate outputs + * + * Enumerates the outputs available at the vpbe display + * returns the status, -EINVAL if end of output list + */ +static int vpbe_display_enum_output(struct file *file, void *priv, + struct v4l2_output *output) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_OUTPUT\n"); + + /* Enumerate outputs */ + + if (NULL == vpbe_dev->ops.enum_outputs) + return -EINVAL; + + ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output); + if (ret) { + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "Failed to enumerate outputs\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_s_output - Set output to + * the output specified by the index + */ +static int vpbe_display_s_output(struct file *file, void *priv, + unsigned int i) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_OUTPUT\n"); + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (NULL == vpbe_dev->ops.set_output) + return -EINVAL; + + ret = vpbe_dev->ops.set_output(vpbe_dev, i); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set output for sub devices\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_g_output - Get output from subdevice + * for a given by the index + */ +static int vpbe_display_g_output(struct file *file, void *priv, + unsigned int *i) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n"); + /* Get the standard from the current encoder */ + *i = vpbe_dev->current_out_index; + + return 0; +} + +/** + * vpbe_display_enum_dv_presets - Enumerate the dv presets + * + * enum the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_PRESETS\n"); + + /* Enumerate outputs */ + if (NULL == vpbe_dev->ops.enum_dv_presets) + return -EINVAL; + + ret = vpbe_dev->ops.enum_dv_presets(vpbe_dev, preset); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to enumerate dv presets info\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_s_dv_preset - Set the dv presets + * + * Set the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_PRESETS\n"); + + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Set the given standard in the encoder */ + if (!vpbe_dev->ops.s_dv_preset) + return -EINVAL; + + ret = vpbe_dev->ops.s_dv_preset(vpbe_dev, preset); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set the dv presets info\n"); + return -EINVAL; + } + /* set the current norm to zero to be consistent. If STD is used + * v4l2 layer will set the norm properly on successful s_std call + */ + layer->video_dev.current_norm = 0; + + return 0; +} + +/** + * vpbe_display_g_dv_preset - Set the dv presets + * + * Get the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *dv_preset) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_PRESETS\n"); + + /* Get the given standard in the encoder */ + + if (vpbe_dev->current_timings.timings_type & + VPBE_ENC_DV_PRESET) { + dv_preset->preset = + vpbe_dev->current_timings.timings.dv_preset; + } else { + return -EINVAL; + } + + return 0; +} + +static int vpbe_display_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = fh->disp_dev->osd_device; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_STREAMOFF,layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer" + " id = %d\n", layer->device_id); + return -EINVAL; + } + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + layer->started = 0; + ret = videobuf_streamoff(&layer->buffer_queue); + + return ret; +} + +static int vpbe_display_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + int ret; + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + /* If Streaming is already started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n"); + return -EBUSY; + } + + /* + * Call videobuf_streamon to start streaming + * in videobuf + */ + ret = videobuf_streamon(&layer->buffer_queue); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "error in videobuf_streamon\n"); + return ret; + } + /* If buffer queue is empty, return error */ + if (list_empty(&layer->dma_queue)) { + v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n"); + goto streamoff; + } + /* Get the next frame from the buffer queue */ + layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next, + struct videobuf_buffer, queue); + /* Remove buffer from the buffer queue */ + list_del(&layer->cur_frm->queue); + /* Mark state of the current frame to active */ + layer->cur_frm->state = VIDEOBUF_ACTIVE; + /* Initialize field_id and started member */ + layer->field_id = 0; + + /* Set parameters in OSD and VENC */ + ret = vpbe_set_osd_display_params(disp_dev, layer); + if (ret < 0) + goto streamoff; + + /* + * if request format is yuv420 semiplanar, need to + * enable both video windows + */ + layer->started = 1; + + layer->layer_first_int = 1; + + return ret; +streamoff: + ret = videobuf_streamoff(&layer->buffer_queue); + return ret; +} + +static int vpbe_display_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_DQBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + /* If this file handle is not allowed to do IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + if (file->f_flags & O_NONBLOCK) + /* Call videobuf_dqbuf for non blocking mode */ + ret = videobuf_dqbuf(&layer->buffer_queue, buf, 1); + else + /* Call videobuf_dqbuf for blocking mode */ + ret = videobuf_dqbuf(&layer->buffer_queue, buf, 0); + + return ret; +} + +static int vpbe_display_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_QBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If this file handle is not allowed to do IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + + return videobuf_qbuf(&layer->buffer_queue, p); +} + +static int vpbe_display_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_QUERYBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* Call videobuf_querybuf to get information */ + ret = videobuf_querybuf(&layer->buffer_queue, buf); + + return ret; +} + +static int vpbe_display_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n"); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If io users of the layer is not zero, return error */ + if (0 != layer->io_usrs) { + v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n"); + return -EBUSY; + } + /* Initialize videobuf queue as per the buffer type */ + videobuf_queue_dma_contig_init(&layer->buffer_queue, + &video_qops, + vpbe_dev->pdev, + &layer->irqlock, + V4L2_BUF_TYPE_VIDEO_OUTPUT, + layer->pix_fmt.field, + sizeof(struct videobuf_buffer), + fh, NULL); + + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed = 1; + /* Increment io usrs member of layer object to 1 */ + layer->io_usrs = 1; + /* Store type of memory requested in layer object */ + layer->memory = req_buf->memory; + /* Initialize buffer queue */ + INIT_LIST_HEAD(&layer->dma_queue); + /* Allocate buffers */ + ret = videobuf_reqbufs(&layer->buffer_queue, req_buf); + + return ret; +} + +/* + * vpbe_display_mmap() + * It is used to map kernel space buffers into user spaces + */ +static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma) +{ + /* Get the layer object and file handle object */ + struct vpbe_fh *fh = filep->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n"); + + if (mutex_lock_interruptible(&layer->opslock)) + return -ERESTARTSYS; + ret = videobuf_mmap_mapper(&layer->buffer_queue, vma); + mutex_unlock(&layer->opslock); + return ret; +} + +/* vpbe_display_poll(): It is used for select/poll system call + */ +static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait) +{ + struct vpbe_fh *fh = filep->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned int err = 0; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n"); + if (layer->started) { + mutex_lock(&layer->opslock); + err = videobuf_poll_stream(filep, &layer->buffer_queue, wait); + mutex_unlock(&layer->opslock); + } + return err; +} + +/* + * vpbe_display_open() + * It creates object of file handle structure and stores it in private_data + * member of filepointer + */ +static int vpbe_display_open(struct file *file) +{ + struct vpbe_fh *fh = NULL; + struct vpbe_layer *layer = video_drvdata(file); + struct vpbe_display *disp_dev = layer->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + int err; + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL); + if (fh == NULL) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe display open plane = %d\n", + layer->device_id); + + /* store pointer to fh in private_data member of filep */ + file->private_data = fh; + fh->layer = layer; + fh->disp_dev = disp_dev; + + if (!layer->usrs) { + if (mutex_lock_interruptible(&layer->opslock)) + return -ERESTARTSYS; + /* First claim the layer for this device */ + err = osd_device->ops.request_layer(osd_device, + layer->layer_info.id); + mutex_unlock(&layer->opslock); + if (err < 0) { + /* Couldn't get layer */ + v4l2_err(&vpbe_dev->v4l2_dev, + "Display Manager failed to allocate layer\n"); + kfree(fh); + return -EINVAL; + } + } + /* Increment layer usrs counter */ + layer->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&layer->prio, &fh->prio); + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe display device opened successfully\n"); + return 0; +} + +/* + * vpbe_display_release() + * This function deletes buffer queue, frees the buffers and the davinci + * display file * handle + */ +static int vpbe_display_release(struct file *file) +{ + /* Get the layer object and file handle object */ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n"); + + mutex_lock(&layer->opslock); + /* if this instance is doing IO */ + if (fh->io_allowed) { + /* Reset io_usrs member of layer object */ + layer->io_usrs = 0; + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + layer->started = 0; + /* Free buffers allocated */ + videobuf_queue_cancel(&layer->buffer_queue); + videobuf_mmap_free(&layer->buffer_queue); + } + + /* Decrement layer usrs counter */ + layer->usrs--; + /* If this file handle has initialize encoder device, reset it */ + if (!layer->usrs) { + if (cfg->pixfmt == PIXFMT_NV12) { + struct vpbe_layer *otherlayer; + otherlayer = + _vpbe_display_get_other_win_layer(disp_dev, layer); + osd_device->ops.disable_layer(osd_device, + otherlayer->layer_info.id); + osd_device->ops.release_layer(osd_device, + otherlayer->layer_info.id); + } + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + osd_device->ops.release_layer(osd_device, + layer->layer_info.id); + } + /* Close the priority */ + v4l2_prio_close(&layer->prio, fh->prio); + file->private_data = NULL; + mutex_unlock(&layer->opslock); + + /* Free memory allocated to file handle object */ + kfree(fh); + + disp_dev->cbcr_ofst = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vpbe_display_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct v4l2_dbg_match *match = ®->match; + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + if (match->type >= 2) { + v4l2_subdev_call(vpbe_dev->venc, + core, + g_register, + reg); + } + + return 0; +} + +static int vpbe_display_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + return 0; +} +#endif + +/* vpbe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpbe_ioctl_ops = { + .vidioc_querycap = vpbe_display_querycap, + .vidioc_g_fmt_vid_out = vpbe_display_g_fmt, + .vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt, + .vidioc_s_fmt_vid_out = vpbe_display_s_fmt, + .vidioc_try_fmt_vid_out = vpbe_display_try_fmt, + .vidioc_reqbufs = vpbe_display_reqbufs, + .vidioc_querybuf = vpbe_display_querybuf, + .vidioc_qbuf = vpbe_display_qbuf, + .vidioc_dqbuf = vpbe_display_dqbuf, + .vidioc_streamon = vpbe_display_streamon, + .vidioc_streamoff = vpbe_display_streamoff, + .vidioc_cropcap = vpbe_display_cropcap, + .vidioc_g_crop = vpbe_display_g_crop, + .vidioc_s_crop = vpbe_display_s_crop, + .vidioc_g_priority = vpbe_display_g_priority, + .vidioc_s_priority = vpbe_display_s_priority, + .vidioc_s_std = vpbe_display_s_std, + .vidioc_g_std = vpbe_display_g_std, + .vidioc_enum_output = vpbe_display_enum_output, + .vidioc_s_output = vpbe_display_s_output, + .vidioc_g_output = vpbe_display_g_output, + .vidioc_s_dv_preset = vpbe_display_s_dv_preset, + .vidioc_g_dv_preset = vpbe_display_g_dv_preset, + .vidioc_enum_dv_presets = vpbe_display_enum_dv_presets, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpbe_display_g_register, + .vidioc_s_register = vpbe_display_s_register, +#endif +}; + +static struct v4l2_file_operations vpbe_fops = { + .owner = THIS_MODULE, + .open = vpbe_display_open, + .release = vpbe_display_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpbe_display_mmap, + .poll = vpbe_display_poll +}; + +static int vpbe_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpbe_display *vpbe_disp = data; + + if (strcmp("vpbe_controller", pdev->name) == 0) + vpbe_disp->vpbe_dev = platform_get_drvdata(pdev); + + if (strcmp("vpbe-osd", pdev->name) == 0) + vpbe_disp->osd_device = platform_get_drvdata(pdev); + + return 0; +} + +static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev, + struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer = NULL; + struct video_device *vbd = NULL; + + /* Allocate memory for four plane display objects */ + + disp_dev->dev[i] = + kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL); + + /* If memory allocation fails, return error */ + if (!disp_dev->dev[i]) { + printk(KERN_ERR "ran out of memory\n"); + return -ENOMEM; + } + spin_lock_init(&disp_dev->dev[i]->irqlock); + mutex_init(&disp_dev->dev[i]->opslock); + + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[i]; + vbd = &vpbe_display_layer->video_dev; + /* Initialize field of video device */ + vbd->release = video_device_release_empty; + vbd->fops = &vpbe_fops; + vbd->ioctl_ops = &vpbe_ioctl_ops; + vbd->minor = -1; + vbd->v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; + vbd->lock = &vpbe_display_layer->opslock; + + if (disp_dev->vpbe_dev->current_timings.timings_type & + VPBE_ENC_STD) { + vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50); + vbd->current_norm = + disp_dev->vpbe_dev-> + current_timings.timings.std_id; + } else + vbd->current_norm = 0; + + snprintf(vbd->name, sizeof(vbd->name), + "DaVinci_VPBE Display_DRIVER_V%d.%d.%d", + (VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff, + (VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff, + (VPBE_DISPLAY_VERSION_CODE) & 0xff); + + vpbe_display_layer->device_id = i; + + vpbe_display_layer->layer_info.id = + ((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1); + + /* Initialize prio member of layer object */ + v4l2_prio_init(&vpbe_display_layer->prio); + + return 0; +} + +static __devinit int register_device(struct vpbe_layer *vpbe_display_layer, + struct vpbe_display *disp_dev, + struct platform_device *pdev) { + int err; + + v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, + "Trying to register VPBE display device.\n"); + v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, + "layer=%x,layer->video_dev=%x\n", + (int)vpbe_display_layer, + (int)&vpbe_display_layer->video_dev); + + err = video_register_device(&vpbe_display_layer->video_dev, + VFL_TYPE_GRABBER, + -1); + if (err) + return -ENODEV; + + vpbe_display_layer->disp_dev = disp_dev; + /* set the driver data in platform device */ + platform_set_drvdata(pdev, disp_dev); + video_set_drvdata(&vpbe_display_layer->video_dev, + vpbe_display_layer); + + return 0; +} + + + +/* + * vpbe_display_probe() + * This function creates device entries by register itself to the V4L2 driver + * and initializes fields of each layer objects + */ +static __devinit int vpbe_display_probe(struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer; + struct vpbe_display *disp_dev; + struct resource *res = NULL; + int k; + int i; + int err; + int irq; + + printk(KERN_DEBUG "vpbe_display_probe\n"); + /* Allocate memory for vpbe_display */ + disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL); + if (!disp_dev) { + printk(KERN_ERR "ran out of memory\n"); + return -ENOMEM; + } + + spin_lock_init(&disp_dev->dma_queue_lock); + /* + * Scan all the platform devices to find the vpbe + * controller device and get the vpbe_dev object + */ + err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev, + vpbe_device_get); + if (err < 0) + return err; + /* Initialize the vpbe display controller */ + if (NULL != disp_dev->vpbe_dev->ops.initialize) { + err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev, + disp_dev->vpbe_dev); + if (err) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Error initing vpbe\n"); + err = -ENOMEM; + goto probe_out; + } + } + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + if (init_vpbe_layer(i, disp_dev, pdev)) { + err = -ENODEV; + goto probe_out; + } + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Unable to get VENC interrupt resource\n"); + err = -ENODEV; + goto probe_out; + } + + irq = res->start; + if (request_irq(irq, venc_isr, IRQF_DISABLED, VPBE_DISPLAY_DRIVER, + disp_dev)) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Unable to request interrupt\n"); + err = -ENODEV; + goto probe_out; + } + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + if (register_device(disp_dev->dev[i], disp_dev, pdev)) { + err = -ENODEV; + goto probe_out_irq; + } + } + + printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n"); + return 0; + +probe_out_irq: + free_irq(res->start, disp_dev); +probe_out: + for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) { + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[k]; + /* Unregister video device */ + if (vpbe_display_layer) { + video_unregister_device( + &vpbe_display_layer->video_dev); + kfree(disp_dev->dev[k]); + } + } + kfree(disp_dev); + return err; +} + +/* + * vpbe_display_remove() + * It un-register hardware layer from V4L2 driver + */ +static int vpbe_display_remove(struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer; + struct vpbe_display *disp_dev = platform_get_drvdata(pdev); + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct resource *res; + int i; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n"); + + /* unregister irq */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + free_irq(res->start, disp_dev); + + /* deinitialize the vpbe display controller */ + if (NULL != vpbe_dev->ops.deinitialize) + vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev); + /* un-register device */ + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[i]; + /* Unregister video device */ + video_unregister_device(&vpbe_display_layer->video_dev); + + } + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + kfree(disp_dev->dev[i]); + disp_dev->dev[i] = NULL; + } + + return 0; +} + +static struct platform_driver vpbe_display_driver = { + .driver = { + .name = VPBE_DISPLAY_DRIVER, + .owner = THIS_MODULE, + .bus = &platform_bus_type, + }, + .probe = vpbe_display_probe, + .remove = __devexit_p(vpbe_display_remove), +}; + +module_platform_driver(vpbe_display_driver); + +MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/davinci/vpbe_osd.c b/drivers/media/platform/davinci/vpbe_osd.c new file mode 100644 index 00000000000..bba299dbf39 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_osd.c @@ -0,0 +1,1605 @@ +/* + * Copyright (C) 2007-2010 Texas Instruments Inc + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Andy Lowe (alowe@mvista.com), MontaVista Software + * - Initial version + * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. + * - ported to sub device interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/slab.h> + +#include <mach/cputype.h> +#include <mach/hardware.h> + +#include <media/davinci/vpss.h> +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_osd.h> + +#include <linux/io.h> +#include "vpbe_osd_regs.h" + +#define MODULE_NAME VPBE_OSD_SUBDEV_NAME + +/* register access routines */ +static inline u32 osd_read(struct osd_state *sd, u32 offset) +{ + struct osd_state *osd = sd; + + return readl(osd->osd_base + offset); +} + +static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset) +{ + struct osd_state *osd = sd; + + writel(val, osd->osd_base + offset); + + return val; +} + +static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset) +{ + struct osd_state *osd = sd; + + u32 addr = osd->osd_base + offset; + u32 val = readl(addr) | mask; + + writel(val, addr); + + return val; +} + +static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset) +{ + struct osd_state *osd = sd; + + u32 addr = osd->osd_base + offset; + u32 val = readl(addr) & ~mask; + + writel(val, addr); + + return val; +} + +static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val, + u32 offset) +{ + struct osd_state *osd = sd; + + u32 addr = osd->osd_base + offset; + u32 new_val = (readl(addr) & ~mask) | (val & mask); + + writel(new_val, addr); + + return new_val; +} + +/* define some macros for layer and pixfmt classification */ +#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1)) +#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1)) +#define is_rgb_pixfmt(pixfmt) \ + (((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888)) +#define is_yc_pixfmt(pixfmt) \ + (((pixfmt) == PIXFMT_YCbCrI) || ((pixfmt) == PIXFMT_YCrCbI) || \ + ((pixfmt) == PIXFMT_NV12)) +#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X +#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5) + +/** + * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446 + * @sd - ptr to struct osd_state + * @field_inversion - inversion flag + * @fb_base_phys - frame buffer address + * @lconfig - ptr to layer config + * + * This routine implements a workaround for the field signal inversion silicon + * erratum described in Advisory 1.3.8 for the DM6446. The fb_base_phys and + * lconfig parameters apply to the vid0 window. This routine should be called + * whenever the vid0 layer configuration or start address is modified, or when + * the OSD field inversion setting is modified. + * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or + * 0 otherwise + */ +static int _osd_dm6446_vid0_pingpong(struct osd_state *sd, + int field_inversion, + unsigned long fb_base_phys, + const struct osd_layer_config *lconfig) +{ + struct osd_platform_data *pdata; + + pdata = (struct osd_platform_data *)sd->dev->platform_data; + if (pdata->field_inv_wa_enable) { + + if (!field_inversion || !lconfig->interlaced) { + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); + osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR); + osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0, + OSD_MISCCTL); + return 0; + } else { + unsigned miscctl = OSD_MISCCTL_PPRV; + + osd_write(sd, + (fb_base_phys & ~0x1F) - lconfig->line_length, + OSD_VIDWIN0ADR); + osd_write(sd, + (fb_base_phys & ~0x1F) + lconfig->line_length, + OSD_PPVWIN0ADR); + osd_modify(sd, + OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl, + OSD_MISCCTL); + + return 1; + } + } + + return 0; +} + +static void _osd_set_field_inversion(struct osd_state *sd, int enable) +{ + unsigned fsinv = 0; + + if (enable) + fsinv = OSD_MODE_FSINV; + + osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE); +} + +static void _osd_set_blink_attribute(struct osd_state *sd, int enable, + enum osd_blink_interval blink) +{ + u32 osdatrmd = 0; + + if (enable) { + osdatrmd |= OSD_OSDATRMD_BLNK; + osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT; + } + /* caller must ensure that OSD1 is configured in attribute mode */ + osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd, + OSD_OSDATRMD); +} + +static void _osd_set_rom_clut(struct osd_state *sd, + enum osd_rom_clut rom_clut) +{ + if (rom_clut == ROM_CLUT0) + osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); + else + osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); +} + +static void _osd_set_palette_map(struct osd_state *sd, + enum osd_win_layer osdwin, + unsigned char pixel_value, + unsigned char clut_index, + enum osd_pix_format pixfmt) +{ + static const int map_2bpp[] = { 0, 5, 10, 15 }; + static const int map_1bpp[] = { 0, 15 }; + int bmp_offset; + int bmp_shift; + int bmp_mask; + int bmp_reg; + + switch (pixfmt) { + case PIXFMT_1BPP: + bmp_reg = map_1bpp[pixel_value & 0x1]; + break; + case PIXFMT_2BPP: + bmp_reg = map_2bpp[pixel_value & 0x3]; + break; + case PIXFMT_4BPP: + bmp_reg = pixel_value & 0xf; + break; + default: + return; + } + + switch (osdwin) { + case OSDWIN_OSD0: + bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32); + break; + case OSDWIN_OSD1: + bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32); + break; + default: + return; + } + + if (bmp_reg & 1) { + bmp_shift = 8; + bmp_mask = 0xff << 8; + } else { + bmp_shift = 0; + bmp_mask = 0xff; + } + + osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset); +} + +static void _osd_set_rec601_attenuation(struct osd_state *sd, + enum osd_win_layer osdwin, int enable) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_OSDWIN0MD_ATN0E, + enable ? OSD_OSDWIN0MD_ATN0E : 0, + OSD_OSDWIN0MD); + if (sd->vpbe_type == VPBE_VERSION_1) + osd_modify(sd, OSD_OSDWIN0MD_ATN0E, + enable ? OSD_OSDWIN0MD_ATN0E : 0, + OSD_OSDWIN0MD); + else if ((sd->vpbe_type == VPBE_VERSION_3) || + (sd->vpbe_type == VPBE_VERSION_2)) + osd_modify(sd, OSD_EXTMODE_ATNOSD0EN, + enable ? OSD_EXTMODE_ATNOSD0EN : 0, + OSD_EXTMODE); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_OSDWIN1MD_ATN1E, + enable ? OSD_OSDWIN1MD_ATN1E : 0, + OSD_OSDWIN1MD); + if (sd->vpbe_type == VPBE_VERSION_1) + osd_modify(sd, OSD_OSDWIN1MD_ATN1E, + enable ? OSD_OSDWIN1MD_ATN1E : 0, + OSD_OSDWIN1MD); + else if ((sd->vpbe_type == VPBE_VERSION_3) || + (sd->vpbe_type == VPBE_VERSION_2)) + osd_modify(sd, OSD_EXTMODE_ATNOSD1EN, + enable ? OSD_EXTMODE_ATNOSD1EN : 0, + OSD_EXTMODE); + break; + } +} + +static void _osd_set_blending_factor(struct osd_state *sd, + enum osd_win_layer osdwin, + enum osd_blending_factor blend) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_OSDWIN0MD_BLND0, + blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_OSDWIN1MD_BLND1, + blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_enable_rgb888_pixblend(struct osd_state *sd, + enum osd_win_layer osdwin) +{ + + osd_modify(sd, OSD_MISCCTL_BLDSEL, 0, OSD_MISCCTL); + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_EXTMODE_OSD0BLDCHR, + OSD_EXTMODE_OSD0BLDCHR, OSD_EXTMODE); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_EXTMODE_OSD1BLDCHR, + OSD_EXTMODE_OSD1BLDCHR, OSD_EXTMODE); + break; + } +} + +static void _osd_enable_color_key(struct osd_state *sd, + enum osd_win_layer osdwin, + unsigned colorkey, + enum osd_pix_format pixfmt) +{ + switch (pixfmt) { + case PIXFMT_1BPP: + case PIXFMT_2BPP: + case PIXFMT_4BPP: + case PIXFMT_8BPP: + if (sd->vpbe_type == VPBE_VERSION_3) { + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_TRANSPBMPIDX_BMP0, + colorkey << + OSD_TRANSPBMPIDX_BMP0_SHIFT, + OSD_TRANSPBMPIDX); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_TRANSPBMPIDX_BMP1, + colorkey << + OSD_TRANSPBMPIDX_BMP1_SHIFT, + OSD_TRANSPBMPIDX); + break; + } + } + break; + case PIXFMT_RGB565: + if (sd->vpbe_type == VPBE_VERSION_1) + osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS, + OSD_TRANSPVAL); + else if (sd->vpbe_type == VPBE_VERSION_3) + osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL, + OSD_TRANSPVALL); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + if (sd->vpbe_type == VPBE_VERSION_3) + osd_modify(sd, OSD_TRANSPVALU_Y, colorkey, + OSD_TRANSPVALU); + break; + case PIXFMT_RGB888: + if (sd->vpbe_type == VPBE_VERSION_3) { + osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL, + OSD_TRANSPVALL); + osd_modify(sd, OSD_TRANSPVALU_RGBU, colorkey >> 16, + OSD_TRANSPVALU); + } + break; + default: + break; + } + + switch (osdwin) { + case OSDWIN_OSD0: + osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_disable_color_key(struct osd_state *sd, + enum osd_win_layer osdwin) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_set_osd_clut(struct osd_state *sd, + enum osd_win_layer osdwin, + enum osd_clut clut) +{ + u32 winmd = 0; + + switch (osdwin) { + case OSDWIN_OSD0: + if (clut == RAM_CLUT) + winmd |= OSD_OSDWIN0MD_CLUTS0; + osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + if (clut == RAM_CLUT) + winmd |= OSD_OSDWIN1MD_CLUTS1; + osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer, + enum osd_zoom_factor h_zoom, + enum osd_zoom_factor v_zoom) +{ + u32 winmd = 0; + + switch (layer) { + case WIN_OSD0: + winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT); + winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT); + osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd, + OSD_OSDWIN0MD); + break; + case WIN_VID0: + winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT); + winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT); + osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd, + OSD_VIDWINMD); + break; + case WIN_OSD1: + winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT); + winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT); + osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd, + OSD_OSDWIN1MD); + break; + case WIN_VID1: + winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT); + winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT); + osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd, + OSD_VIDWINMD); + break; + } +} + +static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer) +{ + switch (layer) { + case WIN_OSD0: + osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); + break; + case WIN_VID0: + osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); + break; + case WIN_OSD1: + /* disable attribute mode as well as disabling the window */ + osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, + OSD_OSDWIN1MD); + break; + case WIN_VID1: + osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); + break; + } +} + +static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (!win->is_enabled) { + spin_unlock_irqrestore(&osd->lock, flags); + return; + } + win->is_enabled = 0; + + _osd_disable_layer(sd, layer); + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void _osd_enable_attribute_mode(struct osd_state *sd) +{ + /* enable attribute mode for OSD1 */ + osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD); +} + +static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer) +{ + switch (layer) { + case WIN_OSD0: + osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); + break; + case WIN_VID0: + osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); + break; + case WIN_OSD1: + /* enable OSD1 and disable attribute mode */ + osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, + OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD); + break; + case WIN_VID1: + osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); + break; + } +} + +static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer, + int otherwin) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + /* + * use otherwin flag to know this is the other vid window + * in YUV420 mode, if is, skip this check + */ + if (!otherwin && (!win->is_allocated || + !win->fb_base_phys || + !cfg->line_length || + !cfg->xsize || + !cfg->ysize)) { + spin_unlock_irqrestore(&osd->lock, flags); + return -1; + } + + if (win->is_enabled) { + spin_unlock_irqrestore(&osd->lock, flags); + return 0; + } + win->is_enabled = 1; + + if (cfg->pixfmt != PIXFMT_OSD_ATTR) + _osd_enable_layer(sd, layer); + else { + _osd_enable_attribute_mode(sd); + _osd_set_blink_attribute(sd, osd->is_blinking, osd->blink); + } + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +#define OSD_SRC_ADDR_HIGH4 0x7800000 +#define OSD_SRC_ADDR_HIGH7 0x7F0000 +#define OSD_SRCADD_OFSET_SFT 23 +#define OSD_SRCADD_ADD_SFT 16 +#define OSD_WINADL_MASK 0xFFFF +#define OSD_WINOFST_MASK 0x1000 +#define VPBE_REG_BASE 0x80000000 + +static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst) +{ + + if (sd->vpbe_type == VPBE_VERSION_1) { + switch (layer) { + case WIN_OSD0: + osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR); + break; + case WIN_VID0: + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); + break; + case WIN_OSD1: + osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR); + break; + case WIN_VID1: + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR); + break; + } + } else if (sd->vpbe_type == VPBE_VERSION_3) { + unsigned long fb_offset_32 = + (fb_base_phys - VPBE_REG_BASE) >> 5; + + switch (layer) { + case WIN_OSD0: + osd_modify(sd, OSD_OSDWINADH_O0AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O0AH_SHIFT), + OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_OSDWIN0ADL_O0AL, + OSD_OSDWIN0ADL); + break; + case WIN_VID0: + osd_modify(sd, OSD_VIDWINADH_V0AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V0AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_VIDWIN0ADL_V0AL, + OSD_VIDWIN0ADL); + break; + case WIN_OSD1: + osd_modify(sd, OSD_OSDWINADH_O1AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O1AH_SHIFT), + OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_OSDWIN1ADL_O1AL, + OSD_OSDWIN1ADL); + break; + case WIN_VID1: + osd_modify(sd, OSD_VIDWINADH_V1AH, + fb_offset_32 >> (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V1AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_VIDWIN1ADL_V1AL, + OSD_VIDWIN1ADL); + break; + } + } else if (sd->vpbe_type == VPBE_VERSION_2) { + struct osd_window_state *win = &sd->win[layer]; + unsigned long fb_offset_32, cbcr_offset_32; + + fb_offset_32 = fb_base_phys - VPBE_REG_BASE; + if (cbcr_ofst) + cbcr_offset_32 = cbcr_ofst; + else + cbcr_offset_32 = win->lconfig.line_length * + win->lconfig.ysize; + cbcr_offset_32 += fb_offset_32; + fb_offset_32 = fb_offset_32 >> 5; + cbcr_offset_32 = cbcr_offset_32 >> 5; + /* + * DM365: start address is 27-bit long address b26 - b23 are + * in offset register b12 - b9, and * bit 26 has to be '1' + */ + if (win->lconfig.pixfmt == PIXFMT_NV12) { + switch (layer) { + case WIN_VID0: + case WIN_VID1: + /* Y is in VID0 */ + osd_modify(sd, OSD_VIDWIN0OFST_V0AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN0OFST); + osd_modify(sd, OSD_VIDWINADH_V0AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V0AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN0ADL); + /* CbCr is in VID1 */ + osd_modify(sd, OSD_VIDWIN1OFST_V1AH, + ((cbcr_offset_32 & + OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN1OFST); + osd_modify(sd, OSD_VIDWINADH_V1AH, + (cbcr_offset_32 & + OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V1AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, cbcr_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN1ADL); + break; + default: + break; + } + } + + switch (layer) { + case WIN_OSD0: + osd_modify(sd, OSD_OSDWIN0OFST_O0AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK, + OSD_OSDWIN0OFST); + osd_modify(sd, OSD_OSDWINADH_O0AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O0AH_SHIFT), OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_OSDWIN0ADL); + break; + case WIN_VID0: + if (win->lconfig.pixfmt != PIXFMT_NV12) { + osd_modify(sd, OSD_VIDWIN0OFST_V0AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN0OFST); + osd_modify(sd, OSD_VIDWINADH_V0AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V0AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN0ADL); + } + break; + case WIN_OSD1: + osd_modify(sd, OSD_OSDWIN1OFST_O1AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK, + OSD_OSDWIN1OFST); + osd_modify(sd, OSD_OSDWINADH_O1AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_OSDWINADH_O1AH_SHIFT), + OSD_OSDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_OSDWIN1ADL); + break; + case WIN_VID1: + if (win->lconfig.pixfmt != PIXFMT_NV12) { + osd_modify(sd, OSD_VIDWIN1OFST_V1AH, + ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> + (OSD_SRCADD_OFSET_SFT - + OSD_WINOFST_AH_SHIFT)) | + OSD_WINOFST_MASK, OSD_VIDWIN1OFST); + osd_modify(sd, OSD_VIDWINADH_V1AH, + (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> + (OSD_SRCADD_ADD_SFT - + OSD_VIDWINADH_V1AH_SHIFT), + OSD_VIDWINADH); + osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, + OSD_VIDWIN1ADL); + } + break; + } + } +} + +static void osd_start_layer(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + win->fb_base_phys = fb_base_phys & ~0x1F; + _osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst); + + if (layer == WIN_VID0) { + osd->pingpong = + _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, + win->fb_base_phys, + cfg); + } + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + *lconfig = win->lconfig; + + spin_unlock_irqrestore(&osd->lock, flags); +} + +/** + * try_layer_config() - Try a specific configuration for the layer + * @sd - ptr to struct osd_state + * @layer - layer to configure + * @lconfig - layer configuration to try + * + * If the requested lconfig is completely rejected and the value of lconfig on + * exit is the current lconfig, then try_layer_config() returns 1. Otherwise, + * try_layer_config() returns 0. A return value of 0 does not necessarily mean + * that the value of lconfig on exit is identical to the value of lconfig on + * entry, but merely that it represents a change from the current lconfig. + */ +static int try_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + int bad_config = 0; + + /* verify that the pixel format is compatible with the layer */ + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + case PIXFMT_2BPP: + case PIXFMT_4BPP: + case PIXFMT_8BPP: + case PIXFMT_RGB565: + if (osd->vpbe_type == VPBE_VERSION_1) + bad_config = !is_vid_win(layer); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + bad_config = !is_vid_win(layer); + break; + case PIXFMT_RGB888: + if (osd->vpbe_type == VPBE_VERSION_1) + bad_config = !is_vid_win(layer); + else if ((osd->vpbe_type == VPBE_VERSION_3) || + (osd->vpbe_type == VPBE_VERSION_2)) + bad_config = !is_osd_win(layer); + break; + case PIXFMT_NV12: + if (osd->vpbe_type != VPBE_VERSION_2) + bad_config = 1; + else + bad_config = is_osd_win(layer); + break; + case PIXFMT_OSD_ATTR: + bad_config = (layer != WIN_OSD1); + break; + default: + bad_config = 1; + break; + } + if (bad_config) { + /* + * The requested pixel format is incompatible with the layer, + * so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return bad_config; + } + + /* DM6446: */ + /* only one OSD window at a time can use RGB pixel formats */ + if ((osd->vpbe_type == VPBE_VERSION_1) && + is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) { + enum osd_pix_format pixfmt; + if (layer == WIN_OSD0) + pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt; + else + pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt; + + if (is_rgb_pixfmt(pixfmt)) { + /* + * The other OSD window is already configured for an + * RGB, so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return 1; + } + } + + /* DM6446: only one video window at a time can use RGB888 */ + if ((osd->vpbe_type == VPBE_VERSION_1) && is_vid_win(layer) && + lconfig->pixfmt == PIXFMT_RGB888) { + enum osd_pix_format pixfmt; + + if (layer == WIN_VID0) + pixfmt = osd->win[WIN_VID1].lconfig.pixfmt; + else + pixfmt = osd->win[WIN_VID0].lconfig.pixfmt; + + if (pixfmt == PIXFMT_RGB888) { + /* + * The other video window is already configured for + * RGB888, so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return 1; + } + } + + /* window dimensions must be non-zero */ + if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) { + *lconfig = win->lconfig; + return 1; + } + + /* round line_length up to a multiple of 32 */ + lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32; + lconfig->line_length = + min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH); + lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE); + lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE); + lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE); + lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE); + lconfig->interlaced = (lconfig->interlaced != 0); + if (lconfig->interlaced) { + /* ysize and ypos must be even for interlaced displays */ + lconfig->ysize &= ~1; + lconfig->ypos &= ~1; + } + + return 0; +} + +static void _osd_disable_vid_rgb888(struct osd_state *sd) +{ + /* + * The DM6446 supports RGB888 pixel format in a single video window. + * This routine disables RGB888 pixel format for both video windows. + * The caller must ensure that neither video window is currently + * configured for RGB888 pixel format. + */ + if (sd->vpbe_type == VPBE_VERSION_1) + osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL); +} + +static void _osd_enable_vid_rgb888(struct osd_state *sd, + enum osd_layer layer) +{ + /* + * The DM6446 supports RGB888 pixel format in a single video window. + * This routine enables RGB888 pixel format for the specified video + * window. The caller must ensure that the other video window is not + * currently configured for RGB888 pixel format, as this routine will + * disable RGB888 pixel format for the other window. + */ + if (sd->vpbe_type == VPBE_VERSION_1) { + if (layer == WIN_VID0) + osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL_RGBEN, OSD_MISCCTL); + else if (layer == WIN_VID1) + osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL); + } +} + +static void _osd_set_cbcr_order(struct osd_state *sd, + enum osd_pix_format pixfmt) +{ + /* + * The caller must ensure that all windows using YC pixfmt use the same + * Cb/Cr order. + */ + if (pixfmt == PIXFMT_YCbCrI) + osd_clear(sd, OSD_MODE_CS, OSD_MODE); + else if (pixfmt == PIXFMT_YCrCbI) + osd_set(sd, OSD_MODE_CS, OSD_MODE); +} + +static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, + const struct osd_layer_config *lconfig) +{ + u32 winmd = 0, winmd_mask = 0, bmw = 0; + + _osd_set_cbcr_order(sd, lconfig->pixfmt); + + switch (layer) { + case WIN_OSD0: + if (sd->vpbe_type == VPBE_VERSION_1) { + winmd_mask |= OSD_OSDWIN0MD_RGB0E; + if (lconfig->pixfmt == PIXFMT_RGB565) + winmd |= OSD_OSDWIN0MD_RGB0E; + } else if ((sd->vpbe_type == VPBE_VERSION_3) || + (sd->vpbe_type == VPBE_VERSION_2)) { + winmd_mask |= OSD_OSDWIN0MD_BMP0MD; + switch (lconfig->pixfmt) { + case PIXFMT_RGB565: + winmd |= (1 << + OSD_OSDWIN0MD_BMP0MD_SHIFT); + break; + case PIXFMT_RGB888: + winmd |= (2 << OSD_OSDWIN0MD_BMP0MD_SHIFT); + _osd_enable_rgb888_pixblend(sd, OSDWIN_OSD0); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + winmd |= (3 << OSD_OSDWIN0MD_BMP0MD_SHIFT); + break; + default: + break; + } + } + + winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0; + + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + bmw = 0; + break; + case PIXFMT_2BPP: + bmw = 1; + break; + case PIXFMT_4BPP: + bmw = 2; + break; + case PIXFMT_8BPP: + bmw = 3; + break; + default: + break; + } + winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT); + + if (lconfig->interlaced) + winmd |= OSD_OSDWIN0MD_OFF0; + + osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD); + osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL); + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL); + } else { + osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL); + } + break; + case WIN_VID0: + winmd_mask |= OSD_VIDWINMD_VFF0; + if (lconfig->interlaced) + winmd |= OSD_VIDWINMD_VFF0; + + osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); + osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL); + /* + * For YUV420P format the register contents are + * duplicated in both VID registers + */ + if ((sd->vpbe_type == VPBE_VERSION_2) && + (lconfig->pixfmt == PIXFMT_NV12)) { + /* other window also */ + if (lconfig->interlaced) { + winmd_mask |= OSD_VIDWINMD_VFF1; + winmd |= OSD_VIDWINMD_VFF1; + osd_modify(sd, winmd_mask, winmd, + OSD_VIDWINMD); + } + + osd_modify(sd, OSD_MISCCTL_S420D, + OSD_MISCCTL_S420D, OSD_MISCCTL); + osd_write(sd, lconfig->line_length >> 5, + OSD_VIDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL); + /* + * if NV21 pixfmt and line length not 32B + * aligned (e.g. NTSC), Need to set window + * X pixel size to be 32B aligned as well + */ + if (lconfig->xsize % 32) { + osd_write(sd, + ((lconfig->xsize + 31) & ~31), + OSD_VIDWIN1XL); + osd_write(sd, + ((lconfig->xsize + 31) & ~31), + OSD_VIDWIN0XL); + } + } else if ((sd->vpbe_type == VPBE_VERSION_2) && + (lconfig->pixfmt != PIXFMT_NV12)) { + osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D, + OSD_MISCCTL); + } + + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos >> 1, + OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, + OSD_VIDWIN1YL); + } + } else { + osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL); + } + } + break; + case WIN_OSD1: + /* + * The caller must ensure that OSD1 is disabled prior to + * switching from a normal mode to attribute mode or from + * attribute mode to a normal mode. + */ + if (lconfig->pixfmt == PIXFMT_OSD_ATTR) { + if (sd->vpbe_type == VPBE_VERSION_1) { + winmd_mask |= OSD_OSDWIN1MD_ATN1E | + OSD_OSDWIN1MD_RGB1E | OSD_OSDWIN1MD_CLUTS1 | + OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1; + } else { + winmd_mask |= OSD_OSDWIN1MD_BMP1MD | + OSD_OSDWIN1MD_CLUTS1 | OSD_OSDWIN1MD_BLND1 | + OSD_OSDWIN1MD_TE1; + } + } else { + if (sd->vpbe_type == VPBE_VERSION_1) { + winmd_mask |= OSD_OSDWIN1MD_RGB1E; + if (lconfig->pixfmt == PIXFMT_RGB565) + winmd |= OSD_OSDWIN1MD_RGB1E; + } else if ((sd->vpbe_type == VPBE_VERSION_3) + || (sd->vpbe_type == VPBE_VERSION_2)) { + winmd_mask |= OSD_OSDWIN1MD_BMP1MD; + switch (lconfig->pixfmt) { + case PIXFMT_RGB565: + winmd |= + (1 << OSD_OSDWIN1MD_BMP1MD_SHIFT); + break; + case PIXFMT_RGB888: + winmd |= + (2 << OSD_OSDWIN1MD_BMP1MD_SHIFT); + _osd_enable_rgb888_pixblend(sd, + OSDWIN_OSD1); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + winmd |= + (3 << OSD_OSDWIN1MD_BMP1MD_SHIFT); + break; + default: + break; + } + } + + winmd_mask |= OSD_OSDWIN1MD_BMW1; + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + bmw = 0; + break; + case PIXFMT_2BPP: + bmw = 1; + break; + case PIXFMT_4BPP: + bmw = 2; + break; + case PIXFMT_8BPP: + bmw = 3; + break; + default: + break; + } + winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT); + } + + winmd_mask |= OSD_OSDWIN1MD_OFF1; + if (lconfig->interlaced) + winmd |= OSD_OSDWIN1MD_OFF1; + + osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD); + osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL); + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL); + } else { + osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL); + } + break; + case WIN_VID1: + winmd_mask |= OSD_VIDWINMD_VFF1; + if (lconfig->interlaced) + winmd |= OSD_VIDWINMD_VFF1; + + osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); + osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL); + /* + * For YUV420P format the register contents are + * duplicated in both VID registers + */ + if (sd->vpbe_type == VPBE_VERSION_2) { + if (lconfig->pixfmt == PIXFMT_NV12) { + /* other window also */ + if (lconfig->interlaced) { + winmd_mask |= OSD_VIDWINMD_VFF0; + winmd |= OSD_VIDWINMD_VFF0; + osd_modify(sd, winmd_mask, winmd, + OSD_VIDWINMD); + } + osd_modify(sd, OSD_MISCCTL_S420D, + OSD_MISCCTL_S420D, OSD_MISCCTL); + osd_write(sd, lconfig->line_length >> 5, + OSD_VIDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL); + } else { + osd_modify(sd, OSD_MISCCTL_S420D, + ~OSD_MISCCTL_S420D, OSD_MISCCTL); + } + } + + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos >> 1, + OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, + OSD_VIDWIN0YL); + } + } else { + osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL); + if ((sd->vpbe_type == VPBE_VERSION_2) && + lconfig->pixfmt == PIXFMT_NV12) { + osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL); + } + } + break; + } +} + +static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + int reject_config; + + spin_lock_irqsave(&osd->lock, flags); + + reject_config = try_layer_config(sd, layer, lconfig); + if (reject_config) { + spin_unlock_irqrestore(&osd->lock, flags); + return reject_config; + } + + /* update the current Cb/Cr order */ + if (is_yc_pixfmt(lconfig->pixfmt)) + osd->yc_pixfmt = lconfig->pixfmt; + + /* + * If we are switching OSD1 from normal mode to attribute mode or from + * attribute mode to normal mode, then we must disable the window. + */ + if (layer == WIN_OSD1) { + if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) && + (cfg->pixfmt != PIXFMT_OSD_ATTR)) || + ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && + (cfg->pixfmt == PIXFMT_OSD_ATTR))) { + win->is_enabled = 0; + _osd_disable_layer(sd, layer); + } + } + + _osd_set_layer_config(sd, layer, lconfig); + + if (layer == WIN_OSD1) { + struct osd_osdwin_state *osdwin_state = + &osd->osdwin[OSDWIN_OSD1]; + + if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && + (cfg->pixfmt == PIXFMT_OSD_ATTR)) { + /* + * We just switched OSD1 from attribute mode to normal + * mode, so we must initialize the CLUT select, the + * blend factor, transparency colorkey enable, and + * attenuation enable (DM6446 only) bits in the + * OSDWIN1MD register. + */ + _osd_set_osd_clut(sd, OSDWIN_OSD1, + osdwin_state->clut); + _osd_set_blending_factor(sd, OSDWIN_OSD1, + osdwin_state->blend); + if (osdwin_state->colorkey_blending) { + _osd_enable_color_key(sd, OSDWIN_OSD1, + osdwin_state-> + colorkey, + lconfig->pixfmt); + } else + _osd_disable_color_key(sd, OSDWIN_OSD1); + _osd_set_rec601_attenuation(sd, OSDWIN_OSD1, + osdwin_state-> + rec601_attenuation); + } else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) && + (cfg->pixfmt != PIXFMT_OSD_ATTR)) { + /* + * We just switched OSD1 from normal mode to attribute + * mode, so we must initialize the blink enable and + * blink interval bits in the OSDATRMD register. + */ + _osd_set_blink_attribute(sd, osd->is_blinking, + osd->blink); + } + } + + /* + * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format + * then configure a default palette map. + */ + if ((lconfig->pixfmt != cfg->pixfmt) && + ((lconfig->pixfmt == PIXFMT_1BPP) || + (lconfig->pixfmt == PIXFMT_2BPP) || + (lconfig->pixfmt == PIXFMT_4BPP))) { + enum osd_win_layer osdwin = + ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1); + struct osd_osdwin_state *osdwin_state = + &osd->osdwin[osdwin]; + unsigned char clut_index; + unsigned char clut_entries = 0; + + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + clut_entries = 2; + break; + case PIXFMT_2BPP: + clut_entries = 4; + break; + case PIXFMT_4BPP: + clut_entries = 16; + break; + default: + break; + } + /* + * The default palette map maps the pixel value to the clut + * index, i.e. pixel value 0 maps to clut entry 0, pixel value + * 1 maps to clut entry 1, etc. + */ + for (clut_index = 0; clut_index < 16; clut_index++) { + osdwin_state->palette_map[clut_index] = clut_index; + if (clut_index < clut_entries) { + _osd_set_palette_map(sd, osdwin, clut_index, + clut_index, + lconfig->pixfmt); + } + } + } + + *cfg = *lconfig; + /* DM6446: configure the RGB888 enable and window selection */ + if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888) + _osd_enable_vid_rgb888(sd, WIN_VID0); + else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888) + _osd_enable_vid_rgb888(sd, WIN_VID1); + else + _osd_disable_vid_rgb888(sd); + + if (layer == WIN_VID0) { + osd->pingpong = + _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, + win->fb_base_phys, + cfg); + } + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +static void osd_init_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + enum osd_win_layer osdwin; + struct osd_osdwin_state *osdwin_state; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + win->is_enabled = 0; + _osd_disable_layer(sd, layer); + + win->h_zoom = ZOOM_X1; + win->v_zoom = ZOOM_X1; + _osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom); + + win->fb_base_phys = 0; + _osd_start_layer(sd, layer, win->fb_base_phys, 0); + + cfg->line_length = 0; + cfg->xsize = 0; + cfg->ysize = 0; + cfg->xpos = 0; + cfg->ypos = 0; + cfg->interlaced = 0; + switch (layer) { + case WIN_OSD0: + case WIN_OSD1: + osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1; + osdwin_state = &osd->osdwin[osdwin]; + /* + * Other code relies on the fact that OSD windows default to a + * bitmap pixel format when they are deallocated, so don't + * change this default pixel format. + */ + cfg->pixfmt = PIXFMT_8BPP; + _osd_set_layer_config(sd, layer, cfg); + osdwin_state->clut = RAM_CLUT; + _osd_set_osd_clut(sd, osdwin, osdwin_state->clut); + osdwin_state->colorkey_blending = 0; + _osd_disable_color_key(sd, osdwin); + osdwin_state->blend = OSD_8_VID_0; + _osd_set_blending_factor(sd, osdwin, osdwin_state->blend); + osdwin_state->rec601_attenuation = 0; + _osd_set_rec601_attenuation(sd, osdwin, + osdwin_state-> + rec601_attenuation); + if (osdwin == OSDWIN_OSD1) { + osd->is_blinking = 0; + osd->blink = BLINK_X1; + } + break; + case WIN_VID0: + case WIN_VID1: + cfg->pixfmt = osd->yc_pixfmt; + _osd_set_layer_config(sd, layer, cfg); + break; + } + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void osd_release_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (!win->is_allocated) { + spin_unlock_irqrestore(&osd->lock, flags); + return; + } + + spin_unlock_irqrestore(&osd->lock, flags); + osd_init_layer(sd, layer); + spin_lock_irqsave(&osd->lock, flags); + + win->is_allocated = 0; + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static int osd_request_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (win->is_allocated) { + spin_unlock_irqrestore(&osd->lock, flags); + return -1; + } + win->is_allocated = 1; + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +static void _osd_init(struct osd_state *sd) +{ + osd_write(sd, 0, OSD_MODE); + osd_write(sd, 0, OSD_VIDWINMD); + osd_write(sd, 0, OSD_OSDWIN0MD); + osd_write(sd, 0, OSD_OSDWIN1MD); + osd_write(sd, 0, OSD_RECTCUR); + osd_write(sd, 0, OSD_MISCCTL); + if (sd->vpbe_type == VPBE_VERSION_3) { + osd_write(sd, 0, OSD_VBNDRY); + osd_write(sd, 0, OSD_EXTMODE); + osd_write(sd, OSD_MISCCTL_DMANG, OSD_MISCCTL); + } +} + +static void osd_set_left_margin(struct osd_state *sd, u32 val) +{ + osd_write(sd, val, OSD_BASEPX); +} + +static void osd_set_top_margin(struct osd_state *sd, u32 val) +{ + osd_write(sd, val, OSD_BASEPY); +} + +static int osd_initialize(struct osd_state *osd) +{ + if (osd == NULL) + return -ENODEV; + _osd_init(osd); + + /* set default Cb/Cr order */ + osd->yc_pixfmt = PIXFMT_YCbCrI; + + if (osd->vpbe_type == VPBE_VERSION_3) { + /* + * ROM CLUT1 on the DM355 is similar (identical?) to ROM CLUT0 + * on the DM6446, so make ROM_CLUT1 the default on the DM355. + */ + osd->rom_clut = ROM_CLUT1; + } + + _osd_set_field_inversion(osd, osd->field_inversion); + _osd_set_rom_clut(osd, osd->rom_clut); + + osd_init_layer(osd, WIN_OSD0); + osd_init_layer(osd, WIN_VID0); + osd_init_layer(osd, WIN_OSD1); + osd_init_layer(osd, WIN_VID1); + + return 0; +} + +static const struct vpbe_osd_ops osd_ops = { + .initialize = osd_initialize, + .request_layer = osd_request_layer, + .release_layer = osd_release_layer, + .enable_layer = osd_enable_layer, + .disable_layer = osd_disable_layer, + .set_layer_config = osd_set_layer_config, + .get_layer_config = osd_get_layer_config, + .start_layer = osd_start_layer, + .set_left_margin = osd_set_left_margin, + .set_top_margin = osd_set_top_margin, +}; + +static int osd_probe(struct platform_device *pdev) +{ + struct osd_platform_data *pdata; + struct osd_state *osd; + struct resource *res; + int ret = 0; + + osd = kzalloc(sizeof(struct osd_state), GFP_KERNEL); + if (osd == NULL) + return -ENOMEM; + + osd->dev = &pdev->dev; + pdata = (struct osd_platform_data *)pdev->dev.platform_data; + osd->vpbe_type = (enum vpbe_version)pdata->vpbe_type; + if (NULL == pdev->dev.platform_data) { + dev_err(osd->dev, "No platform data defined for OSD" + " sub device\n"); + ret = -ENOENT; + goto free_mem; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(osd->dev, "Unable to get OSD register address map\n"); + ret = -ENODEV; + goto free_mem; + } + osd->osd_base_phys = res->start; + osd->osd_size = resource_size(res); + if (!request_mem_region(osd->osd_base_phys, osd->osd_size, + MODULE_NAME)) { + dev_err(osd->dev, "Unable to reserve OSD MMIO region\n"); + ret = -ENODEV; + goto free_mem; + } + osd->osd_base = (unsigned long)ioremap_nocache(res->start, + osd->osd_size); + if (!osd->osd_base) { + dev_err(osd->dev, "Unable to map the OSD region\n"); + ret = -ENODEV; + goto release_mem_region; + } + spin_lock_init(&osd->lock); + osd->ops = osd_ops; + platform_set_drvdata(pdev, osd); + dev_notice(osd->dev, "OSD sub device probe success\n"); + return ret; + +release_mem_region: + release_mem_region(osd->osd_base_phys, osd->osd_size); +free_mem: + kfree(osd); + return ret; +} + +static int osd_remove(struct platform_device *pdev) +{ + struct osd_state *osd = platform_get_drvdata(pdev); + + iounmap((void *)osd->osd_base); + release_mem_region(osd->osd_base_phys, osd->osd_size); + kfree(osd); + return 0; +} + +static struct platform_driver osd_driver = { + .probe = osd_probe, + .remove = osd_remove, + .driver = { + .name = MODULE_NAME, + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(osd_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DaVinci OSD Manager Driver"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/davinci/vpbe_osd_regs.h b/drivers/media/platform/davinci/vpbe_osd_regs.h new file mode 100644 index 00000000000..584520f3af6 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_osd_regs.h @@ -0,0 +1,364 @@ +/* + * Copyright (C) 2006-2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_OSD_REGS_H +#define _VPBE_OSD_REGS_H + +/* VPBE Global Registers */ +#define VPBE_PID 0x0 +#define VPBE_PCR 0x4 + +/* VPSS CLock Registers */ +#define VPSSCLK_PID 0x00 +#define VPSSCLK_CLKCTRL 0x04 + +/* VPSS Buffer Logic Registers */ +#define VPSSBL_PID 0x00 +#define VPSSBL_PCR 0x04 +#define VPSSBL_BCR 0x08 +#define VPSSBL_INTSTAT 0x0C +#define VPSSBL_INTSEL 0x10 +#define VPSSBL_EVTSEL 0x14 +#define VPSSBL_MEMCTRL 0x18 +#define VPSSBL_CCDCMUX 0x1C + +/* DM365 ISP5 system configuration */ +#define ISP5_PID 0x0 +#define ISP5_PCCR 0x4 +#define ISP5_BCR 0x8 +#define ISP5_INTSTAT 0xC +#define ISP5_INTSEL1 0x10 +#define ISP5_INTSEL2 0x14 +#define ISP5_INTSEL3 0x18 +#define ISP5_EVTSEL 0x1c +#define ISP5_CCDCMUX 0x20 + +/* VPBE On-Screen Display Subsystem Registers (OSD) */ +#define OSD_MODE 0x00 +#define OSD_VIDWINMD 0x04 +#define OSD_OSDWIN0MD 0x08 +#define OSD_OSDWIN1MD 0x0C +#define OSD_OSDATRMD 0x0C +#define OSD_RECTCUR 0x10 +#define OSD_VIDWIN0OFST 0x18 +#define OSD_VIDWIN1OFST 0x1C +#define OSD_OSDWIN0OFST 0x20 +#define OSD_OSDWIN1OFST 0x24 +#define OSD_VIDWINADH 0x28 +#define OSD_VIDWIN0ADL 0x2C +#define OSD_VIDWIN0ADR 0x2C +#define OSD_VIDWIN1ADL 0x30 +#define OSD_VIDWIN1ADR 0x30 +#define OSD_OSDWINADH 0x34 +#define OSD_OSDWIN0ADL 0x38 +#define OSD_OSDWIN0ADR 0x38 +#define OSD_OSDWIN1ADL 0x3C +#define OSD_OSDWIN1ADR 0x3C +#define OSD_BASEPX 0x40 +#define OSD_BASEPY 0x44 +#define OSD_VIDWIN0XP 0x48 +#define OSD_VIDWIN0YP 0x4C +#define OSD_VIDWIN0XL 0x50 +#define OSD_VIDWIN0YL 0x54 +#define OSD_VIDWIN1XP 0x58 +#define OSD_VIDWIN1YP 0x5C +#define OSD_VIDWIN1XL 0x60 +#define OSD_VIDWIN1YL 0x64 +#define OSD_OSDWIN0XP 0x68 +#define OSD_OSDWIN0YP 0x6C +#define OSD_OSDWIN0XL 0x70 +#define OSD_OSDWIN0YL 0x74 +#define OSD_OSDWIN1XP 0x78 +#define OSD_OSDWIN1YP 0x7C +#define OSD_OSDWIN1XL 0x80 +#define OSD_OSDWIN1YL 0x84 +#define OSD_CURXP 0x88 +#define OSD_CURYP 0x8C +#define OSD_CURXL 0x90 +#define OSD_CURYL 0x94 +#define OSD_W0BMP01 0xA0 +#define OSD_W0BMP23 0xA4 +#define OSD_W0BMP45 0xA8 +#define OSD_W0BMP67 0xAC +#define OSD_W0BMP89 0xB0 +#define OSD_W0BMPAB 0xB4 +#define OSD_W0BMPCD 0xB8 +#define OSD_W0BMPEF 0xBC +#define OSD_W1BMP01 0xC0 +#define OSD_W1BMP23 0xC4 +#define OSD_W1BMP45 0xC8 +#define OSD_W1BMP67 0xCC +#define OSD_W1BMP89 0xD0 +#define OSD_W1BMPAB 0xD4 +#define OSD_W1BMPCD 0xD8 +#define OSD_W1BMPEF 0xDC +#define OSD_VBNDRY 0xE0 +#define OSD_EXTMODE 0xE4 +#define OSD_MISCCTL 0xE8 +#define OSD_CLUTRAMYCB 0xEC +#define OSD_CLUTRAMCR 0xF0 +#define OSD_TRANSPVAL 0xF4 +#define OSD_TRANSPVALL 0xF4 +#define OSD_TRANSPVALU 0xF8 +#define OSD_TRANSPBMPIDX 0xFC +#define OSD_PPVWIN0ADR 0xFC + +/* bit definitions */ +#define VPBE_PCR_VENC_DIV (1 << 1) +#define VPBE_PCR_CLK_OFF (1 << 0) + +#define VPSSBL_INTSTAT_HSSIINT (1 << 14) +#define VPSSBL_INTSTAT_CFALDINT (1 << 13) +#define VPSSBL_INTSTAT_IPIPE_INT5 (1 << 12) +#define VPSSBL_INTSTAT_IPIPE_INT4 (1 << 11) +#define VPSSBL_INTSTAT_IPIPE_INT3 (1 << 10) +#define VPSSBL_INTSTAT_IPIPE_INT2 (1 << 9) +#define VPSSBL_INTSTAT_IPIPE_INT1 (1 << 8) +#define VPSSBL_INTSTAT_IPIPE_INT0 (1 << 7) +#define VPSSBL_INTSTAT_IPIPEIFINT (1 << 6) +#define VPSSBL_INTSTAT_OSDINT (1 << 5) +#define VPSSBL_INTSTAT_VENCINT (1 << 4) +#define VPSSBL_INTSTAT_H3AINT (1 << 3) +#define VPSSBL_INTSTAT_CCDC_VDINT2 (1 << 2) +#define VPSSBL_INTSTAT_CCDC_VDINT1 (1 << 1) +#define VPSSBL_INTSTAT_CCDC_VDINT0 (1 << 0) + +/* DM365 ISP5 bit definitions */ +#define ISP5_INTSTAT_VENCINT (1 << 21) +#define ISP5_INTSTAT_OSDINT (1 << 20) + +/* VMOD TVTYP options for HDMD=0 */ +#define SDTV_NTSC 0 +#define SDTV_PAL 1 +/* VMOD TVTYP options for HDMD=1 */ +#define HDTV_525P 0 +#define HDTV_625P 1 +#define HDTV_1080I 2 +#define HDTV_720P 3 + +#define OSD_MODE_CS (1 << 15) +#define OSD_MODE_OVRSZ (1 << 14) +#define OSD_MODE_OHRSZ (1 << 13) +#define OSD_MODE_EF (1 << 12) +#define OSD_MODE_VVRSZ (1 << 11) +#define OSD_MODE_VHRSZ (1 << 10) +#define OSD_MODE_FSINV (1 << 9) +#define OSD_MODE_BCLUT (1 << 8) +#define OSD_MODE_CABG_SHIFT 0 +#define OSD_MODE_CABG (0xff << 0) + +#define OSD_VIDWINMD_VFINV (1 << 15) +#define OSD_VIDWINMD_V1EFC (1 << 14) +#define OSD_VIDWINMD_VHZ1_SHIFT 12 +#define OSD_VIDWINMD_VHZ1 (3 << 12) +#define OSD_VIDWINMD_VVZ1_SHIFT 10 +#define OSD_VIDWINMD_VVZ1 (3 << 10) +#define OSD_VIDWINMD_VFF1 (1 << 9) +#define OSD_VIDWINMD_ACT1 (1 << 8) +#define OSD_VIDWINMD_V0EFC (1 << 6) +#define OSD_VIDWINMD_VHZ0_SHIFT 4 +#define OSD_VIDWINMD_VHZ0 (3 << 4) +#define OSD_VIDWINMD_VVZ0_SHIFT 2 +#define OSD_VIDWINMD_VVZ0 (3 << 2) +#define OSD_VIDWINMD_VFF0 (1 << 1) +#define OSD_VIDWINMD_ACT0 (1 << 0) + +#define OSD_OSDWIN0MD_ATN0E (1 << 14) +#define OSD_OSDWIN0MD_RGB0E (1 << 13) +#define OSD_OSDWIN0MD_BMP0MD_SHIFT 13 +#define OSD_OSDWIN0MD_BMP0MD (3 << 13) +#define OSD_OSDWIN0MD_CLUTS0 (1 << 12) +#define OSD_OSDWIN0MD_OHZ0_SHIFT 10 +#define OSD_OSDWIN0MD_OHZ0 (3 << 10) +#define OSD_OSDWIN0MD_OVZ0_SHIFT 8 +#define OSD_OSDWIN0MD_OVZ0 (3 << 8) +#define OSD_OSDWIN0MD_BMW0_SHIFT 6 +#define OSD_OSDWIN0MD_BMW0 (3 << 6) +#define OSD_OSDWIN0MD_BLND0_SHIFT 3 +#define OSD_OSDWIN0MD_BLND0 (7 << 3) +#define OSD_OSDWIN0MD_TE0 (1 << 2) +#define OSD_OSDWIN0MD_OFF0 (1 << 1) +#define OSD_OSDWIN0MD_OACT0 (1 << 0) + +#define OSD_OSDWIN1MD_OASW (1 << 15) +#define OSD_OSDWIN1MD_ATN1E (1 << 14) +#define OSD_OSDWIN1MD_RGB1E (1 << 13) +#define OSD_OSDWIN1MD_BMP1MD_SHIFT 13 +#define OSD_OSDWIN1MD_BMP1MD (3 << 13) +#define OSD_OSDWIN1MD_CLUTS1 (1 << 12) +#define OSD_OSDWIN1MD_OHZ1_SHIFT 10 +#define OSD_OSDWIN1MD_OHZ1 (3 << 10) +#define OSD_OSDWIN1MD_OVZ1_SHIFT 8 +#define OSD_OSDWIN1MD_OVZ1 (3 << 8) +#define OSD_OSDWIN1MD_BMW1_SHIFT 6 +#define OSD_OSDWIN1MD_BMW1 (3 << 6) +#define OSD_OSDWIN1MD_BLND1_SHIFT 3 +#define OSD_OSDWIN1MD_BLND1 (7 << 3) +#define OSD_OSDWIN1MD_TE1 (1 << 2) +#define OSD_OSDWIN1MD_OFF1 (1 << 1) +#define OSD_OSDWIN1MD_OACT1 (1 << 0) + +#define OSD_OSDATRMD_OASW (1 << 15) +#define OSD_OSDATRMD_OHZA_SHIFT 10 +#define OSD_OSDATRMD_OHZA (3 << 10) +#define OSD_OSDATRMD_OVZA_SHIFT 8 +#define OSD_OSDATRMD_OVZA (3 << 8) +#define OSD_OSDATRMD_BLNKINT_SHIFT 6 +#define OSD_OSDATRMD_BLNKINT (3 << 6) +#define OSD_OSDATRMD_OFFA (1 << 1) +#define OSD_OSDATRMD_BLNK (1 << 0) + +#define OSD_RECTCUR_RCAD_SHIFT 8 +#define OSD_RECTCUR_RCAD (0xff << 8) +#define OSD_RECTCUR_CLUTSR (1 << 7) +#define OSD_RECTCUR_RCHW_SHIFT 4 +#define OSD_RECTCUR_RCHW (7 << 4) +#define OSD_RECTCUR_RCVW_SHIFT 1 +#define OSD_RECTCUR_RCVW (7 << 1) +#define OSD_RECTCUR_RCACT (1 << 0) + +#define OSD_VIDWIN0OFST_V0LO (0x1ff << 0) + +#define OSD_VIDWIN1OFST_V1LO (0x1ff << 0) + +#define OSD_OSDWIN0OFST_O0LO (0x1ff << 0) + +#define OSD_OSDWIN1OFST_O1LO (0x1ff << 0) + +#define OSD_WINOFST_AH_SHIFT 9 + +#define OSD_VIDWIN0OFST_V0AH (0xf << 9) +#define OSD_VIDWIN1OFST_V1AH (0xf << 9) +#define OSD_OSDWIN0OFST_O0AH (0xf << 9) +#define OSD_OSDWIN1OFST_O1AH (0xf << 9) + +#define OSD_VIDWINADH_V1AH_SHIFT 8 +#define OSD_VIDWINADH_V1AH (0x7f << 8) +#define OSD_VIDWINADH_V0AH_SHIFT 0 +#define OSD_VIDWINADH_V0AH (0x7f << 0) + +#define OSD_VIDWIN0ADL_V0AL (0xffff << 0) + +#define OSD_VIDWIN1ADL_V1AL (0xffff << 0) + +#define OSD_OSDWINADH_O1AH_SHIFT 8 +#define OSD_OSDWINADH_O1AH (0x7f << 8) +#define OSD_OSDWINADH_O0AH_SHIFT 0 +#define OSD_OSDWINADH_O0AH (0x7f << 0) + +#define OSD_OSDWIN0ADL_O0AL (0xffff << 0) + +#define OSD_OSDWIN1ADL_O1AL (0xffff << 0) + +#define OSD_BASEPX_BPX (0x3ff << 0) + +#define OSD_BASEPY_BPY (0x1ff << 0) + +#define OSD_VIDWIN0XP_V0X (0x7ff << 0) + +#define OSD_VIDWIN0YP_V0Y (0x7ff << 0) + +#define OSD_VIDWIN0XL_V0W (0x7ff << 0) + +#define OSD_VIDWIN0YL_V0H (0x7ff << 0) + +#define OSD_VIDWIN1XP_V1X (0x7ff << 0) + +#define OSD_VIDWIN1YP_V1Y (0x7ff << 0) + +#define OSD_VIDWIN1XL_V1W (0x7ff << 0) + +#define OSD_VIDWIN1YL_V1H (0x7ff << 0) + +#define OSD_OSDWIN0XP_W0X (0x7ff << 0) + +#define OSD_OSDWIN0YP_W0Y (0x7ff << 0) + +#define OSD_OSDWIN0XL_W0W (0x7ff << 0) + +#define OSD_OSDWIN0YL_W0H (0x7ff << 0) + +#define OSD_OSDWIN1XP_W1X (0x7ff << 0) + +#define OSD_OSDWIN1YP_W1Y (0x7ff << 0) + +#define OSD_OSDWIN1XL_W1W (0x7ff << 0) + +#define OSD_OSDWIN1YL_W1H (0x7ff << 0) + +#define OSD_CURXP_RCSX (0x7ff << 0) + +#define OSD_CURYP_RCSY (0x7ff << 0) + +#define OSD_CURXL_RCSW (0x7ff << 0) + +#define OSD_CURYL_RCSH (0x7ff << 0) + +#define OSD_EXTMODE_EXPMDSEL (1 << 15) +#define OSD_EXTMODE_SCRNHEXP_SHIFT 13 +#define OSD_EXTMODE_SCRNHEXP (3 << 13) +#define OSD_EXTMODE_SCRNVEXP (1 << 12) +#define OSD_EXTMODE_OSD1BLDCHR (1 << 11) +#define OSD_EXTMODE_OSD0BLDCHR (1 << 10) +#define OSD_EXTMODE_ATNOSD1EN (1 << 9) +#define OSD_EXTMODE_ATNOSD0EN (1 << 8) +#define OSD_EXTMODE_OSDHRSZ15 (1 << 7) +#define OSD_EXTMODE_VIDHRSZ15 (1 << 6) +#define OSD_EXTMODE_ZMFILV1HEN (1 << 5) +#define OSD_EXTMODE_ZMFILV1VEN (1 << 4) +#define OSD_EXTMODE_ZMFILV0HEN (1 << 3) +#define OSD_EXTMODE_ZMFILV0VEN (1 << 2) +#define OSD_EXTMODE_EXPFILHEN (1 << 1) +#define OSD_EXTMODE_EXPFILVEN (1 << 0) + +#define OSD_MISCCTL_BLDSEL (1 << 15) +#define OSD_MISCCTL_S420D (1 << 14) +#define OSD_MISCCTL_BMAPT (1 << 13) +#define OSD_MISCCTL_DM365M (1 << 12) +#define OSD_MISCCTL_RGBEN (1 << 7) +#define OSD_MISCCTL_RGBWIN (1 << 6) +#define OSD_MISCCTL_DMANG (1 << 6) +#define OSD_MISCCTL_TMON (1 << 5) +#define OSD_MISCCTL_RSEL (1 << 4) +#define OSD_MISCCTL_CPBSY (1 << 3) +#define OSD_MISCCTL_PPSW (1 << 2) +#define OSD_MISCCTL_PPRV (1 << 1) + +#define OSD_CLUTRAMYCB_Y_SHIFT 8 +#define OSD_CLUTRAMYCB_Y (0xff << 8) +#define OSD_CLUTRAMYCB_CB_SHIFT 0 +#define OSD_CLUTRAMYCB_CB (0xff << 0) + +#define OSD_CLUTRAMCR_CR_SHIFT 8 +#define OSD_CLUTRAMCR_CR (0xff << 8) +#define OSD_CLUTRAMCR_CADDR_SHIFT 0 +#define OSD_CLUTRAMCR_CADDR (0xff << 0) + +#define OSD_TRANSPVAL_RGBTRANS (0xffff << 0) + +#define OSD_TRANSPVALL_RGBL (0xffff << 0) + +#define OSD_TRANSPVALU_Y_SHIFT 8 +#define OSD_TRANSPVALU_Y (0xff << 8) +#define OSD_TRANSPVALU_RGBU_SHIFT 0 +#define OSD_TRANSPVALU_RGBU (0xff << 0) + +#define OSD_TRANSPBMPIDX_BMP1_SHIFT 8 +#define OSD_TRANSPBMPIDX_BMP1 (0xff << 8) +#define OSD_TRANSPBMPIDX_BMP0_SHIFT 0 +#define OSD_TRANSPBMPIDX_BMP0 0xff + +#endif /* _DAVINCI_VPBE_H_ */ diff --git a/drivers/media/platform/davinci/vpbe_venc.c b/drivers/media/platform/davinci/vpbe_venc.c new file mode 100644 index 00000000000..b21ecc8d134 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_venc.c @@ -0,0 +1,706 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/videodev2.h> +#include <linux/slab.h> + +#include <mach/hardware.h> +#include <mach/mux.h> +#include <mach/i2c.h> + +#include <linux/io.h> + +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpss.h> +#include <media/v4l2-device.h> + +#include "vpbe_venc_regs.h" + +#define MODULE_NAME VPBE_VENC_SUBDEV_NAME + +static int debug = 2; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-2"); + +struct venc_state { + struct v4l2_subdev sd; + struct venc_callback *callback; + struct venc_platform_data *pdata; + struct device *pdev; + u32 output; + v4l2_std_id std; + spinlock_t lock; + void __iomem *venc_base; + void __iomem *vdaccfg_reg; +}; + +static inline struct venc_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct venc_state, sd); +} + +static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset) +{ + struct venc_state *venc = to_state(sd); + + return readl(venc->venc_base + offset); +} + +static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val) +{ + struct venc_state *venc = to_state(sd); + + writel(val, (venc->venc_base + offset)); + + return val; +} + +static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset, + u32 val, u32 mask) +{ + u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask); + + venc_write(sd, offset, new_val); + + return new_val; +} + +static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val) +{ + struct venc_state *venc = to_state(sd); + + writel(val, venc->vdaccfg_reg); + + val = readl(venc->vdaccfg_reg); + + return val; +} + +#define VDAC_COMPONENT 0x543 +#define VDAC_S_VIDEO 0x210 +/* This function sets the dac of the VPBE for various outputs + */ +static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) +{ + switch (out_index) { + case 0: + v4l2_dbg(debug, 1, sd, "Setting output to Composite\n"); + venc_write(sd, VENC_DACSEL, 0); + break; + case 1: + v4l2_dbg(debug, 1, sd, "Setting output to Component\n"); + venc_write(sd, VENC_DACSEL, VDAC_COMPONENT); + break; + case 2: + v4l2_dbg(debug, 1, sd, "Setting output to S-video\n"); + venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO); + break; + default: + return -EINVAL; + } + + return 0; +} + +static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n"); + + if (benable) { + venc_write(sd, VENC_VMOD, 0); + venc_write(sd, VENC_CVBS, 0); + venc_write(sd, VENC_LCDOUT, 0); + venc_write(sd, VENC_HSPLS, 0); + venc_write(sd, VENC_HSTART, 0); + venc_write(sd, VENC_HVALID, 0); + venc_write(sd, VENC_HINT, 0); + venc_write(sd, VENC_VSPLS, 0); + venc_write(sd, VENC_VSTART, 0); + venc_write(sd, VENC_VVALID, 0); + venc_write(sd, VENC_VINT, 0); + venc_write(sd, VENC_YCCCTL, 0); + venc_write(sd, VENC_DACSEL, 0); + + } else { + venc_write(sd, VENC_VMOD, 0); + /* disable VCLK output pin enable */ + venc_write(sd, VENC_VIDCTL, 0x141); + + /* Disable output sync pins */ + venc_write(sd, VENC_SYNCCTL, 0); + + /* Disable DCLOCK */ + venc_write(sd, VENC_DCLKCTL, 0); + venc_write(sd, VENC_DRGBX1, 0x0000057C); + + /* Disable LCD output control (accepting default polarity) */ + venc_write(sd, VENC_LCDOUT, 0); + if (pdata->venc_type != VPBE_VERSION_3) + venc_write(sd, VENC_CMPNT, 0x100); + venc_write(sd, VENC_HSPLS, 0); + venc_write(sd, VENC_HINT, 0); + venc_write(sd, VENC_HSTART, 0); + venc_write(sd, VENC_HVALID, 0); + + venc_write(sd, VENC_VSPLS, 0); + venc_write(sd, VENC_VINT, 0); + venc_write(sd, VENC_VSTART, 0); + venc_write(sd, VENC_VVALID, 0); + + venc_write(sd, VENC_HSDLY, 0); + venc_write(sd, VENC_VSDLY, 0); + + venc_write(sd, VENC_YCCCTL, 0); + venc_write(sd, VENC_VSTARTA, 0); + + /* Set OSD clock and OSD Sync Adavance registers */ + venc_write(sd, VENC_OSDCLK0, 1); + venc_write(sd, VENC_OSDCLK1, 2); + } +} + +#define VDAC_CONFIG_SD_V3 0x0E21A6B6 +#define VDAC_CONFIG_SD_V2 0x081141CF +/* + * setting NTSC mode + */ +static int venc_set_ntsc(struct v4l2_subdev *sd) +{ + u32 val; + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n"); + + /* Setup clock at VPSS & VENC for SD */ + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); + if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + if (pdata->venc_type == VPBE_VERSION_3) { + venc_write(sd, VENC_CLKCTL, 0x01); + venc_write(sd, VENC_VIDCTL, 0); + val = vdaccfg_write(sd, VDAC_CONFIG_SD_V3); + } else if (pdata->venc_type == VPBE_VERSION_2) { + venc_write(sd, VENC_CLKCTL, 0x01); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V2); + } else { + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS); + } + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); + venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_write(sd, VENC_DACTST, 0x0); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * setting PAL mode + */ +static int venc_set_pal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_pal\n"); + + /* Setup clock at VPSS & VENC for SD */ + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); + if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + if (pdata->venc_type == VPBE_VERSION_3) { + venc_write(sd, VENC_CLKCTL, 0x1); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V3); + } else if (pdata->venc_type == VPBE_VERSION_2) { + venc_write(sd, VENC_CLKCTL, 0x1); + venc_write(sd, VENC_VIDCTL, 0); + vdaccfg_write(sd, VDAC_CONFIG_SD_V2); + } else { + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + } + + venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT, + VENC_SYNCCTL_OVD); + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, + (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, + (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); + venc_modify(sd, VENC_VMOD, + (1 << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_write(sd, VENC_DACTST, 0x0); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +#define VDAC_CONFIG_HD_V2 0x081141EF +/* + * venc_set_480p59_94 + * + * This function configures the video encoder to EDTV(525p) component setting. + */ +static int venc_set_480p59_94(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n"); + if ((pdata->venc_type != VPBE_VERSION_1) && + (pdata->venc_type != VPBE_VERSION_2)) + return -EINVAL; + + /* Setup clock at VPSS & VENC for SD */ + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_480P59_94) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + if (pdata->venc_type == VPBE_VERSION_2) + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + if (pdata->venc_type == VPBE_VERSION_1) { + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + } + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << + VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); + + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * venc_set_625p + * + * This function configures the video encoder to HDTV(625p) component setting + */ +static int venc_set_576p50(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_576p50\n"); + + if ((pdata->venc_type != VPBE_VERSION_1) && + (pdata->venc_type != VPBE_VERSION_2)) + return -EINVAL; + /* Setup clock at VPSS & VENC for SD */ + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_576P50) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + if (pdata->venc_type == VPBE_VERSION_2) + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + if (pdata->venc_type == VPBE_VERSION_1) { + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + } + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + + venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << + VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only + */ +static int venc_set_720p60_internal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_720P60) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + venc_write(sd, VENC_VMOD, 0); + /* DM365 component HD mode */ + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + venc_write(sd, VENC_XHINTVL, 0); + return 0; +} + +/* + * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only + */ +static int venc_set_1080i30_internal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_1080P30) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + + venc_write(sd, VENC_VMOD, 0); + /* DM365 component HD mode */ + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + venc_write(sd, VENC_XHINTVL, 0); + return 0; +} + +static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + v4l2_dbg(debug, 1, sd, "venc_s_std_output\n"); + + if (norm & V4L2_STD_525_60) + return venc_set_ntsc(sd); + else if (norm & V4L2_STD_625_50) + return venc_set_pal(sd); + + return -EINVAL; +} + +static int venc_s_dv_preset(struct v4l2_subdev *sd, + struct v4l2_dv_preset *dv_preset) +{ + struct venc_state *venc = to_state(sd); + int ret; + + v4l2_dbg(debug, 1, sd, "venc_s_dv_preset\n"); + + if (dv_preset->preset == V4L2_DV_576P50) + return venc_set_576p50(sd); + else if (dv_preset->preset == V4L2_DV_480P59_94) + return venc_set_480p59_94(sd); + else if ((dv_preset->preset == V4L2_DV_720P60) && + (venc->pdata->venc_type == VPBE_VERSION_2)) { + /* TBD setup internal 720p mode here */ + ret = venc_set_720p60_internal(sd); + /* for DM365 VPBE, there is DAC inside */ + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + return ret; + } else if ((dv_preset->preset == V4L2_DV_1080I30) && + (venc->pdata->venc_type == VPBE_VERSION_2)) { + /* TBD setup internal 1080i mode here */ + ret = venc_set_1080i30_internal(sd); + /* for DM365 VPBE, there is DAC inside */ + vdaccfg_write(sd, VDAC_CONFIG_HD_V2); + return ret; + } + return -EINVAL; +} + +static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config) +{ + struct venc_state *venc = to_state(sd); + int ret; + + v4l2_dbg(debug, 1, sd, "venc_s_routing\n"); + + ret = venc_set_dac(sd, output); + if (!ret) + venc->output = output; + + return ret; +} + +static long venc_ioctl(struct v4l2_subdev *sd, + unsigned int cmd, + void *arg) +{ + u32 val; + + switch (cmd) { + case VENC_GET_FLD: + val = venc_read(sd, VENC_VSTAT); + *((int *)arg) = ((val & VENC_VSTAT_FIDST) == + VENC_VSTAT_FIDST); + break; + default: + v4l2_err(sd, "Wrong IOCTL cmd\n"); + break; + } + + return 0; +} + +static const struct v4l2_subdev_core_ops venc_core_ops = { + .ioctl = venc_ioctl, +}; + +static const struct v4l2_subdev_video_ops venc_video_ops = { + .s_routing = venc_s_routing, + .s_std_output = venc_s_std_output, + .s_dv_preset = venc_s_dv_preset, +}; + +static const struct v4l2_subdev_ops venc_ops = { + .core = &venc_core_ops, + .video = &venc_video_ops, +}; + +static int venc_initialize(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + int ret; + + /* Set default to output to composite and std to NTSC */ + venc->output = 0; + venc->std = V4L2_STD_525_60; + + ret = venc_s_routing(sd, 0, venc->output, 0); + if (ret < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + ret = venc_s_std_output(sd, venc->std); + if (ret < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return ret; +} + +static int venc_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct venc_state **venc = data; + + if (strcmp(MODULE_NAME, pdev->name) == 0) + *venc = platform_get_drvdata(pdev); + + return 0; +} + +struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, + const char *venc_name) +{ + struct venc_state *venc; + int err; + + err = bus_for_each_dev(&platform_bus_type, NULL, &venc, + venc_device_get); + if (venc == NULL) + return NULL; + + v4l2_subdev_init(&venc->sd, &venc_ops); + + strcpy(venc->sd.name, venc_name); + if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) { + v4l2_err(v4l2_dev, + "vpbe unable to register venc sub device\n"); + return NULL; + } + if (venc_initialize(&venc->sd)) { + v4l2_err(v4l2_dev, + "vpbe venc initialization failed\n"); + return NULL; + } + + return &venc->sd; +} +EXPORT_SYMBOL(venc_sub_dev_init); + +static int venc_probe(struct platform_device *pdev) +{ + struct venc_state *venc; + struct resource *res; + int ret; + + venc = kzalloc(sizeof(struct venc_state), GFP_KERNEL); + if (venc == NULL) + return -ENOMEM; + + venc->pdev = &pdev->dev; + venc->pdata = pdev->dev.platform_data; + if (NULL == venc->pdata) { + dev_err(venc->pdev, "Unable to get platform data for" + " VENC sub device"); + ret = -ENOENT; + goto free_mem; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(venc->pdev, + "Unable to get VENC register address map\n"); + ret = -ENODEV; + goto free_mem; + } + + if (!request_mem_region(res->start, resource_size(res), "venc")) { + dev_err(venc->pdev, "Unable to reserve VENC MMIO region\n"); + ret = -ENODEV; + goto free_mem; + } + + venc->venc_base = ioremap_nocache(res->start, resource_size(res)); + if (!venc->venc_base) { + dev_err(venc->pdev, "Unable to map VENC IO space\n"); + ret = -ENODEV; + goto release_venc_mem_region; + } + + if (venc->pdata->venc_type != VPBE_VERSION_1) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(venc->pdev, + "Unable to get VDAC_CONFIG address map\n"); + ret = -ENODEV; + goto unmap_venc_io; + } + + if (!request_mem_region(res->start, + resource_size(res), "venc")) { + dev_err(venc->pdev, + "Unable to reserve VDAC_CONFIG MMIO region\n"); + ret = -ENODEV; + goto unmap_venc_io; + } + + venc->vdaccfg_reg = ioremap_nocache(res->start, + resource_size(res)); + if (!venc->vdaccfg_reg) { + dev_err(venc->pdev, + "Unable to map VDAC_CONFIG IO space\n"); + ret = -ENODEV; + goto release_vdaccfg_mem_region; + } + } + spin_lock_init(&venc->lock); + platform_set_drvdata(pdev, venc); + dev_notice(venc->pdev, "VENC sub device probe success\n"); + return 0; + +release_vdaccfg_mem_region: + release_mem_region(res->start, resource_size(res)); +unmap_venc_io: + iounmap(venc->venc_base); +release_venc_mem_region: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); +free_mem: + kfree(venc); + return ret; +} + +static int venc_remove(struct platform_device *pdev) +{ + struct venc_state *venc = platform_get_drvdata(pdev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap((void *)venc->venc_base); + release_mem_region(res->start, resource_size(res)); + if (venc->pdata->venc_type != VPBE_VERSION_1) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + iounmap((void *)venc->vdaccfg_reg); + release_mem_region(res->start, resource_size(res)); + } + kfree(venc); + + return 0; +} + +static struct platform_driver venc_driver = { + .probe = venc_probe, + .remove = venc_remove, + .driver = { + .name = MODULE_NAME, + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(venc_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VPBE VENC Driver"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/davinci/vpbe_venc_regs.h b/drivers/media/platform/davinci/vpbe_venc_regs.h new file mode 100644 index 00000000000..947cb151077 --- /dev/null +++ b/drivers/media/platform/davinci/vpbe_venc_regs.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2006-2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2.. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_VENC_REGS_H +#define _VPBE_VENC_REGS_H + +/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */ +#define VENC_VMOD 0x00 +#define VENC_VIDCTL 0x04 +#define VENC_VDPRO 0x08 +#define VENC_SYNCCTL 0x0C +#define VENC_HSPLS 0x10 +#define VENC_VSPLS 0x14 +#define VENC_HINT 0x18 +#define VENC_HSTART 0x1C +#define VENC_HVALID 0x20 +#define VENC_VINT 0x24 +#define VENC_VSTART 0x28 +#define VENC_VVALID 0x2C +#define VENC_HSDLY 0x30 +#define VENC_VSDLY 0x34 +#define VENC_YCCCTL 0x38 +#define VENC_RGBCTL 0x3C +#define VENC_RGBCLP 0x40 +#define VENC_LINECTL 0x44 +#define VENC_CULLLINE 0x48 +#define VENC_LCDOUT 0x4C +#define VENC_BRTS 0x50 +#define VENC_BRTW 0x54 +#define VENC_ACCTL 0x58 +#define VENC_PWMP 0x5C +#define VENC_PWMW 0x60 +#define VENC_DCLKCTL 0x64 +#define VENC_DCLKPTN0 0x68 +#define VENC_DCLKPTN1 0x6C +#define VENC_DCLKPTN2 0x70 +#define VENC_DCLKPTN3 0x74 +#define VENC_DCLKPTN0A 0x78 +#define VENC_DCLKPTN1A 0x7C +#define VENC_DCLKPTN2A 0x80 +#define VENC_DCLKPTN3A 0x84 +#define VENC_DCLKHS 0x88 +#define VENC_DCLKHSA 0x8C +#define VENC_DCLKHR 0x90 +#define VENC_DCLKVS 0x94 +#define VENC_DCLKVR 0x98 +#define VENC_CAPCTL 0x9C +#define VENC_CAPDO 0xA0 +#define VENC_CAPDE 0xA4 +#define VENC_ATR0 0xA8 +#define VENC_ATR1 0xAC +#define VENC_ATR2 0xB0 +#define VENC_VSTAT 0xB8 +#define VENC_RAMADR 0xBC +#define VENC_RAMPORT 0xC0 +#define VENC_DACTST 0xC4 +#define VENC_YCOLVL 0xC8 +#define VENC_SCPROG 0xCC +#define VENC_CVBS 0xDC +#define VENC_CMPNT 0xE0 +#define VENC_ETMG0 0xE4 +#define VENC_ETMG1 0xE8 +#define VENC_ETMG2 0xEC +#define VENC_ETMG3 0xF0 +#define VENC_DACSEL 0xF4 +#define VENC_ARGBX0 0x100 +#define VENC_ARGBX1 0x104 +#define VENC_ARGBX2 0x108 +#define VENC_ARGBX3 0x10C +#define VENC_ARGBX4 0x110 +#define VENC_DRGBX0 0x114 +#define VENC_DRGBX1 0x118 +#define VENC_DRGBX2 0x11C +#define VENC_DRGBX3 0x120 +#define VENC_DRGBX4 0x124 +#define VENC_VSTARTA 0x128 +#define VENC_OSDCLK0 0x12C +#define VENC_OSDCLK1 0x130 +#define VENC_HVLDCL0 0x134 +#define VENC_HVLDCL1 0x138 +#define VENC_OSDHADV 0x13C +#define VENC_CLKCTL 0x140 +#define VENC_GAMCTL 0x144 +#define VENC_XHINTVL 0x174 + +/* bit definitions */ +#define VPBE_PCR_VENC_DIV (1 << 1) +#define VPBE_PCR_CLK_OFF (1 << 0) + +#define VENC_VMOD_VDMD_SHIFT 12 +#define VENC_VMOD_VDMD_YCBCR16 0 +#define VENC_VMOD_VDMD_YCBCR8 1 +#define VENC_VMOD_VDMD_RGB666 2 +#define VENC_VMOD_VDMD_RGB8 3 +#define VENC_VMOD_VDMD_EPSON 4 +#define VENC_VMOD_VDMD_CASIO 5 +#define VENC_VMOD_VDMD_UDISPQVGA 6 +#define VENC_VMOD_VDMD_STNLCD 7 +#define VENC_VMOD_VIE_SHIFT 1 +#define VENC_VMOD_VDMD (7 << 12) +#define VENC_VMOD_ITLCL (1 << 11) +#define VENC_VMOD_ITLC (1 << 10) +#define VENC_VMOD_NSIT (1 << 9) +#define VENC_VMOD_HDMD (1 << 8) +#define VENC_VMOD_TVTYP_SHIFT 6 +#define VENC_VMOD_TVTYP (3 << 6) +#define VENC_VMOD_SLAVE (1 << 5) +#define VENC_VMOD_VMD (1 << 4) +#define VENC_VMOD_BLNK (1 << 3) +#define VENC_VMOD_VIE (1 << 1) +#define VENC_VMOD_VENC (1 << 0) + +/* VMOD TVTYP options for HDMD=0 */ +#define SDTV_NTSC 0 +#define SDTV_PAL 1 +/* VMOD TVTYP options for HDMD=1 */ +#define HDTV_525P 0 +#define HDTV_625P 1 +#define HDTV_1080I 2 +#define HDTV_720P 3 + +#define VENC_VIDCTL_VCLKP (1 << 14) +#define VENC_VIDCTL_VCLKE_SHIFT 13 +#define VENC_VIDCTL_VCLKE (1 << 13) +#define VENC_VIDCTL_VCLKZ_SHIFT 12 +#define VENC_VIDCTL_VCLKZ (1 << 12) +#define VENC_VIDCTL_SYDIR_SHIFT 8 +#define VENC_VIDCTL_SYDIR (1 << 8) +#define VENC_VIDCTL_DOMD_SHIFT 4 +#define VENC_VIDCTL_DOMD (3 << 4) +#define VENC_VIDCTL_YCDIR_SHIFT 0 +#define VENC_VIDCTL_YCDIR (1 << 0) + +#define VENC_VDPRO_ATYCC_SHIFT 5 +#define VENC_VDPRO_ATYCC (1 << 5) +#define VENC_VDPRO_ATCOM_SHIFT 4 +#define VENC_VDPRO_ATCOM (1 << 4) +#define VENC_VDPRO_DAFRQ (1 << 3) +#define VENC_VDPRO_DAUPS (1 << 2) +#define VENC_VDPRO_CUPS (1 << 1) +#define VENC_VDPRO_YUPS (1 << 0) + +#define VENC_SYNCCTL_VPL_SHIFT 3 +#define VENC_SYNCCTL_VPL (1 << 3) +#define VENC_SYNCCTL_HPL_SHIFT 2 +#define VENC_SYNCCTL_HPL (1 << 2) +#define VENC_SYNCCTL_SYEV_SHIFT 1 +#define VENC_SYNCCTL_SYEV (1 << 1) +#define VENC_SYNCCTL_SYEH_SHIFT 0 +#define VENC_SYNCCTL_SYEH (1 << 0) +#define VENC_SYNCCTL_OVD_SHIFT 14 +#define VENC_SYNCCTL_OVD (1 << 14) + +#define VENC_DCLKCTL_DCKEC_SHIFT 11 +#define VENC_DCLKCTL_DCKEC (1 << 11) +#define VENC_DCLKCTL_DCKPW_SHIFT 0 +#define VENC_DCLKCTL_DCKPW (0x3f << 0) + +#define VENC_VSTAT_FIDST (1 << 4) + +#define VENC_CMPNT_MRGB_SHIFT 14 +#define VENC_CMPNT_MRGB (1 << 14) + +#endif /* _VPBE_VENC_REGS_H */ diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c new file mode 100644 index 00000000000..843b138faab --- /dev/null +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -0,0 +1,2079 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Driver name : VPFE Capture driver + * VPFE Capture driver allows applications to capture and stream video + * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as + * TVP5146 or Raw Bayer RGB image data from an image sensor + * such as Microns' MT9T001, MT9T031 etc. + * + * These SoCs have, in common, a Video Processing Subsystem (VPSS) that + * consists of a Video Processing Front End (VPFE) for capturing + * video/raw image data and Video Processing Back End (VPBE) for displaying + * YUV data through an in-built analog encoder or Digital LCD port. This + * driver is for capture through VPFE. A typical EVM using these SoCs have + * following high level configuration. + * + * + * decoder(TVP5146/ YUV/ + * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) + * data input | | + * V | + * SDRAM | + * V + * Image Processor + * | + * V + * SDRAM + * The data flow happens from a decoder connected to the VPFE over a + * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface + * and to the input of VPFE through an optional MUX (if more inputs are + * to be interfaced on the EVM). The input data is first passed through + * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC + * does very little or no processing on YUV data and does pre-process Raw + * Bayer RGB data through modules such as Defect Pixel Correction (DFC) + * Color Space Conversion (CSC), data gain/offset etc. After this, data + * can be written to SDRAM or can be connected to the image processing + * block such as IPIPE (on DM355 only). + * + * Features supported + * - MMAP IO + * - Capture using TVP5146 over BT.656 + * - support for interfacing decoders using sub device model + * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV + * data capture to SDRAM. + * TODO list + * - Support multiple REQBUF after open + * - Support for de-allocating buffers through REQBUF + * - Support for Raw Bayer RGB capture + * - Support for chaining Image Processor + * - Support for static allocation of buffers + * - Support for USERPTR IO + * - Support for STREAMON before QBUF + * - Support for control ioctls + */ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <media/v4l2-common.h> +#include <linux/io.h> +#include <media/davinci/vpfe_capture.h> +#include "ccdc_hw_device.h" + +static int debug; +static u32 numbuffers = 3; +static u32 bufsize = (720 * 576 * 2); + +module_param(numbuffers, uint, S_IRUGO); +module_param(bufsize, uint, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); +MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/* standard information */ +struct vpfe_standard { + v4l2_std_id std_id; + unsigned int width; + unsigned int height; + struct v4l2_fract pixelaspect; + /* 0 - progressive, 1 - interlaced */ + int frame_format; +}; + +/* ccdc configuration */ +struct ccdc_config { + /* This make sure vpfe is probed and ready to go */ + int vpfe_probed; + /* name of ccdc device */ + char name[32]; +}; + +/* data structures */ +static struct vpfe_config_params config_params = { + .min_numbuffers = 3, + .numbuffers = 3, + .min_bufsize = 720 * 480 * 2, + .device_bufsize = 720 * 576 * 2, +}; + +/* ccdc device registered */ +static struct ccdc_hw_device *ccdc_dev; +/* lock for accessing ccdc information */ +static DEFINE_MUTEX(ccdc_lock); +/* ccdc configuration */ +static struct ccdc_config *ccdc_cfg; + +const struct vpfe_standard vpfe_standards[] = { + {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, + {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, +}; + +/* Used when raw Bayer image from ccdc is directly captured to SDRAM */ +static const struct vpfe_pixel_format vpfe_pix_fmts[] = { + { + .fmtdesc = { + .index = 0, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit A-Law compr.", + .pixelformat = V4L2_PIX_FMT_SBGGR8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 1, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb - 16bit", + .pixelformat = V4L2_PIX_FMT_SBGGR16, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 2, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit DPCM compr.", + .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 3, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 4, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved YUYV", + .pixelformat = V4L2_PIX_FMT_YUYV, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 5, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Y/CbCr 4:2:0 - Semi planar", + .pixelformat = V4L2_PIX_FMT_NV12, + }, + .bpp = 1, + }, +}; + +/* + * vpfe_lookup_pix_format() + * lookup an entry in the vpfe pix format table based on pix_format + */ +static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { + if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat) + return &vpfe_pix_fmts[i]; + } + return NULL; +} + +/* + * vpfe_register_ccdc_device. CCDC module calls this to + * register with vpfe capture + */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) +{ + int ret = 0; + printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); + + BUG_ON(!dev->hw_ops.open); + BUG_ON(!dev->hw_ops.enable); + BUG_ON(!dev->hw_ops.set_hw_if_params); + BUG_ON(!dev->hw_ops.configure); + BUG_ON(!dev->hw_ops.set_buftype); + BUG_ON(!dev->hw_ops.get_buftype); + BUG_ON(!dev->hw_ops.enum_pix); + BUG_ON(!dev->hw_ops.set_frame_format); + BUG_ON(!dev->hw_ops.get_frame_format); + BUG_ON(!dev->hw_ops.get_pixel_format); + BUG_ON(!dev->hw_ops.set_pixel_format); + BUG_ON(!dev->hw_ops.set_image_window); + BUG_ON(!dev->hw_ops.get_image_window); + BUG_ON(!dev->hw_ops.get_line_length); + BUG_ON(!dev->hw_ops.getfid); + + mutex_lock(&ccdc_lock); + if (NULL == ccdc_cfg) { + /* + * TODO. Will this ever happen? if so, we need to fix it. + * Proabably we need to add the request to a linked list and + * walk through it during vpfe probe + */ + printk(KERN_ERR "vpfe capture not initialized\n"); + ret = -EFAULT; + goto unlock; + } + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + ret = -EINVAL; + goto unlock; + } + + if (ccdc_dev) { + printk(KERN_ERR "ccdc already registered\n"); + ret = -EINVAL; + goto unlock; + } + + ccdc_dev = dev; +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} +EXPORT_SYMBOL(vpfe_register_ccdc_device); + +/* + * vpfe_unregister_ccdc_device. CCDC module calls this to + * unregister with vpfe capture + */ +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) +{ + if (NULL == dev) { + printk(KERN_ERR "invalid ccdc device ptr\n"); + return; + } + + printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", + dev->name); + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + return; + } + + mutex_lock(&ccdc_lock); + ccdc_dev = NULL; + mutex_unlock(&ccdc_lock); + return; +} +EXPORT_SYMBOL(vpfe_unregister_ccdc_device); + +/* + * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings + */ +static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev, + struct v4l2_format *f) +{ + struct v4l2_rect image_win; + enum ccdc_buftype buf_type; + enum ccdc_frmfmt frm_fmt; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ccdc_dev->hw_ops.get_image_window(&image_win); + f->fmt.pix.width = image_win.width; + f->fmt.pix.height = image_win.height; + f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length(); + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * + f->fmt.pix.height; + buf_type = ccdc_dev->hw_ops.get_buftype(); + f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format(); + frm_fmt = ccdc_dev->hw_ops.get_frame_format(); + if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + f->fmt.pix.field = V4L2_FIELD_NONE; + else if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) + f->fmt.pix.field = V4L2_FIELD_SEQ_TB; + else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n"); + return -EINVAL; + } + } else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n"); + return -EINVAL; + } + return 0; +} + +/* + * vpfe_config_ccdc_image_format() + * For a pix format, configure ccdc to setup the capture + */ +static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; + int ret = 0; + + if (ccdc_dev->hw_ops.set_pixel_format( + vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "couldn't set pix format in ccdc\n"); + return -EINVAL; + } + /* configure the image window */ + ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); + + switch (vpfe_dev->fmt.fmt.pix.field) { + case V4L2_FIELD_INTERLACED: + /* do nothing, since it is default */ + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_INTERLEAVED); + break; + case V4L2_FIELD_NONE: + frm_fmt = CCDC_FRMFMT_PROGRESSIVE; + /* buffer type only applicable for interlaced scan */ + break; + case V4L2_FIELD_SEQ_TB: + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_SEPARATED); + break; + default: + return -EINVAL; + } + + /* set the frame format */ + if (!ret) + ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); + return ret; +} +/* + * vpfe_config_image_format() + * For a given standard, this functions sets up the default + * pix format & crop values in the vpfe device and ccdc. It first + * starts with defaults based values from the standard table. + * It then checks if sub device support g_mbus_fmt and then override the + * values based on that.Sets crop values to match with scan resolution + * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the + * values in ccdc + */ +static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, + const v4l2_std_id *std_id) +{ + struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; + struct v4l2_mbus_framefmt mbus_fmt; + struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { + if (vpfe_standards[i].std_id & *std_id) { + vpfe_dev->std_info.active_pixels = + vpfe_standards[i].width; + vpfe_dev->std_info.active_lines = + vpfe_standards[i].height; + vpfe_dev->std_info.frame_format = + vpfe_standards[i].frame_format; + vpfe_dev->std_index = i; + break; + } + } + + if (i == ARRAY_SIZE(vpfe_standards)) { + v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); + return -EINVAL; + } + + vpfe_dev->crop.top = 0; + vpfe_dev->crop.left = 0; + vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; + vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; + pix->width = vpfe_dev->crop.width; + pix->height = vpfe_dev->crop.height; + + /* first field and frame format based on standard frame format */ + if (vpfe_dev->std_info.frame_format) { + pix->field = V4L2_FIELD_INTERLACED; + /* assume V4L2_PIX_FMT_UYVY as default */ + pix->pixelformat = V4L2_PIX_FMT_UYVY; + v4l2_fill_mbus_format(&mbus_fmt, pix, + V4L2_MBUS_FMT_YUYV10_2X10); + } else { + pix->field = V4L2_FIELD_NONE; + /* assume V4L2_PIX_FMT_SBGGR8 */ + pix->pixelformat = V4L2_PIX_FMT_SBGGR8; + v4l2_fill_mbus_format(&mbus_fmt, pix, + V4L2_MBUS_FMT_SBGGR8_1X8); + } + + /* if sub device supports g_mbus_fmt, override the defaults */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, video, g_mbus_fmt, &mbus_fmt); + + if (ret && ret != -ENOIOCTLCMD) { + v4l2_err(&vpfe_dev->v4l2_dev, + "error in getting g_mbus_fmt from sub device\n"); + return ret; + } + v4l2_fill_pix_format(pix, &mbus_fmt); + pix->bytesperline = pix->width * 2; + pix->sizeimage = pix->bytesperline * pix->height; + + /* Sets the values in CCDC */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + if (ret) + return ret; + + /* Update the values of sizeimage and bytesperline */ + if (!ret) { + pix->bytesperline = ccdc_dev->hw_ops.get_line_length(); + pix->sizeimage = pix->bytesperline * pix->height; + } + return ret; +} + +static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) +{ + int ret = 0; + + /* set first input of current subdevice as the current input */ + vpfe_dev->current_input = 0; + + /* set default standard */ + vpfe_dev->std_index = 0; + + /* Configure the default format information */ + ret = vpfe_config_image_format(vpfe_dev, + &vpfe_standards[vpfe_dev->std_index].std_id); + if (ret) + return ret; + + /* now open the ccdc device to initialize it */ + mutex_lock(&ccdc_lock); + if (NULL == ccdc_dev) { + v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); + ret = -ENODEV; + goto unlock; + } + + if (!try_module_get(ccdc_dev->owner)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); + ret = -ENODEV; + goto unlock; + } + ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); + if (!ret) + vpfe_dev->initialized = 1; + + /* Clear all VPFE/CCDC interrupts */ + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(-1); + +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} + +/* + * vpfe_open : It creates object of file handle structure and + * stores it in private_data member of filepointer + */ +static int vpfe_open(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); + + if (!vpfe_dev->cfg->num_subdevs) { + v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); + return -ENODEV; + } + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL); + if (NULL == fh) { + v4l2_err(&vpfe_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + /* store pointer to fh in private_data member of file */ + file->private_data = fh; + fh->vpfe_dev = vpfe_dev; + mutex_lock(&vpfe_dev->lock); + /* If decoder is not initialized. initialize it */ + if (!vpfe_dev->initialized) { + if (vpfe_initialize_device(vpfe_dev)) { + mutex_unlock(&vpfe_dev->lock); + return -ENODEV; + } + } + /* Increment device usrs counter */ + vpfe_dev->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&vpfe_dev->prio, &fh->prio); + mutex_unlock(&vpfe_dev->lock); + return 0; +} + +static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + list_del(&vpfe_dev->next_frm->queue); + vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; + addr = videobuf_to_dma_contig(vpfe_dev->next_frm); + + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + addr += vpfe_dev->field_off; + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) +{ + struct timeval timevalue; + + do_gettimeofday(&timevalue); + vpfe_dev->cur_frm->ts = timevalue; + vpfe_dev->cur_frm->state = VIDEOBUF_DONE; + vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; + wake_up_interruptible(&vpfe_dev->cur_frm->done); + vpfe_dev->cur_frm = vpfe_dev->next_frm; +} + +/* ISR for VINT0*/ +static irqreturn_t vpfe_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + enum v4l2_field field; + int fid; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); + field = vpfe_dev->fmt.fmt.pix.field; + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) + goto clear_intr; + + /* only for 6446 this will be applicable */ + if (NULL != ccdc_dev->hw_ops.reset) + ccdc_dev->hw_ops.reset(); + + if (field == V4L2_FIELD_NONE) { + /* handle progressive frame capture */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "frame format is progressive...\n"); + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + goto clear_intr; + } + + /* interlaced or TB capture check which field we are in hardware */ + fid = ccdc_dev->hw_ops.getfid(); + + /* switch the software maintained field id */ + vpfe_dev->field_id ^= 1; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", + fid, vpfe_dev->field_id); + if (fid == vpfe_dev->field_id) { + /* we are in-sync here,continue */ + if (fid == 0) { + /* + * One frame is just being captured. If the next frame + * is available, release the current frame and move on + */ + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + /* + * based on whether the two fields are stored + * interleavely or separately in memory, reconfigure + * the CCDC memory address + */ + if (field == V4L2_FIELD_SEQ_TB) { + vpfe_schedule_bottom_field(vpfe_dev); + } + goto clear_intr; + } + /* + * if one field is just being captured configure + * the next frame get the next frame from the empty + * queue if no frame is available hold on to the + * current buffer + */ + spin_lock(&vpfe_dev->dma_queue_lock); + if (!list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + } else if (fid == 0) { + /* + * out of sync. Recover from any hardware out-of-sync. + * May loose one frame + */ + vpfe_dev->field_id = fid; + } +clear_intr: + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +/* vdint1_isr - isr handler for VINT1 interrupt */ +static irqreturn_t vdint1_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) { + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + return IRQ_HANDLED; + } + + spin_lock(&vpfe_dev->dma_queue_lock); + if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && + !list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + + if (vpfe_dev->cfg->clr_intr) + vpfe_dev->cfg->clr_intr(irq); + + return IRQ_HANDLED; +} + +static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) + free_irq(vpfe_dev->ccdc_irq1, vpfe_dev); +} + +static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { + return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, + IRQF_DISABLED, "vpfe_capture1", + vpfe_dev); + } + return 0; +} + +/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ +static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + vpfe_dev->started = 0; + ccdc_dev->hw_ops.enable(0); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(0); +} + +/* + * vpfe_release : This function deletes buffer queue, frees the + * buffers and the vpfe file handle + */ +static int vpfe_release(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); + + /* Get the device lock */ + mutex_lock(&vpfe_dev->lock); + /* if this instance is doing IO */ + if (fh->io_allowed) { + if (vpfe_dev->started) { + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, + video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, + "stream off failed in subdev\n"); + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + videobuf_streamoff(&vpfe_dev->buffer_queue); + } + vpfe_dev->io_usrs = 0; + vpfe_dev->numbuffers = config_params.numbuffers; + } + + /* Decrement device usrs counter */ + vpfe_dev->usrs--; + /* Close the priority */ + v4l2_prio_close(&vpfe_dev->prio, fh->prio); + /* If this is the last file handle */ + if (!vpfe_dev->usrs) { + vpfe_dev->initialized = 0; + if (ccdc_dev->hw_ops.close) + ccdc_dev->hw_ops.close(vpfe_dev->pdev); + module_put(ccdc_dev->owner); + } + mutex_unlock(&vpfe_dev->lock); + file->private_data = NULL; + /* Free memory allocated to file handle object */ + kfree(fh); + return 0; +} + +/* + * vpfe_mmap : It is used to map kernel space buffers + * into user spaces + */ +static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* Get the device object and file handle object */ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); + + return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); +} + +/* + * vpfe_poll: It is used for select/poll system call + */ +static unsigned int vpfe_poll(struct file *file, poll_table *wait) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); + + if (vpfe_dev->started) + return videobuf_poll_stream(file, + &vpfe_dev->buffer_queue, wait); + return 0; +} + +/* vpfe capture driver file operations */ +static const struct v4l2_file_operations vpfe_fops = { + .owner = THIS_MODULE, + .open = vpfe_open, + .release = vpfe_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpfe_mmap, + .poll = vpfe_poll +}; + +/* + * vpfe_check_format() + * This function adjust the input pixel format as per hardware + * capabilities and update the same in pixfmt. + * Following algorithm used :- + * + * If given pixformat is not in the vpfe list of pix formats or not + * supported by the hardware, current value of pixformat in the device + * is used + * If given field is not supported, then current field is used. If field + * is different from current, then it is matched with that from sub device. + * Minimum height is 2 lines for interlaced or tb field and 1 line for + * progressive. Maximum height is clamped to active active lines of scan + * Minimum width is 32 bytes in memory and width is clamped to active + * pixels of scan. + * bytesperline is a multiple of 32. + */ +static const struct vpfe_pixel_format * + vpfe_check_format(struct vpfe_device *vpfe_dev, + struct v4l2_pix_format *pixfmt) +{ + u32 min_height = 1, min_width = 32, max_width, max_height; + const struct vpfe_pixel_format *vpfe_pix_fmt; + u32 pix; + int temp, found; + + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + if (NULL == vpfe_pix_fmt) { + /* + * use current pixel format in the vpfe device. We + * will find this pix format in the table + */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check if hw supports it */ + temp = 0; + found = 0; + while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { + if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) { + found = 1; + break; + } + temp++; + } + + if (!found) { + /* use current pixel format */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + /* + * Since this is currently used in the vpfe device, we + * will find this pix format in the table + */ + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check what field format is supported */ + if (pixfmt->field == V4L2_FIELD_ANY) { + /* if field is any, use current value as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + } + + /* + * if field is not same as current field in the vpfe device + * try matching the field with the sub device field + */ + if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { + /* + * If field value is not in the supported fields, use current + * field used in the device as default + */ + switch (pixfmt->field) { + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + /* if sub device is supporting progressive, use that */ + if (!vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_NONE: + if (vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_INTERLACED; + break; + + default: + /* use current field as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + break; + } + } + + /* Now adjust image resolutions supported */ + if (pixfmt->field == V4L2_FIELD_INTERLACED || + pixfmt->field == V4L2_FIELD_SEQ_TB) + min_height = 2; + + max_width = vpfe_dev->std_info.active_pixels; + max_height = vpfe_dev->std_info.active_lines; + min_width /= vpfe_pix_fmt->bpp; + + v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); + + pixfmt->width = clamp((pixfmt->width), min_width, max_width); + pixfmt->height = clamp((pixfmt->height), min_height, max_height); + + /* If interlaced, adjust height to be a multiple of 2 */ + if (pixfmt->field == V4L2_FIELD_INTERLACED) + pixfmt->height &= (~1); + /* + * recalculate bytesperline and sizeimage since width + * and height might have changed + */ + pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) + & ~31); + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = + pixfmt->bytesperline * pixfmt->height + + ((pixfmt->bytesperline * pixfmt->height) >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height =" + " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, + pixfmt->bytesperline, pixfmt->sizeimage); + return vpfe_pix_fmt; +} + +static int vpfe_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); + + cap->version = VPFE_CAPTURE_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); + strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); + /* Fill in the information about format */ + *fmt = vpfe_dev->fmt; + return ret; +} + +static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmt; + int temp_index; + u32 pix; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); + + if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) + return -EINVAL; + + /* Fill in the information about format */ + pix_fmt = vpfe_lookup_pix_format(pix); + if (NULL != pix_fmt) { + temp_index = fmt->index; + *fmt = pix_fmt->fmtdesc; + fmt->index = temp_index; + return 0; + } + return -EINVAL; +} + +static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); + + /* If streaming is started, return error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Check for valid frame format */ + pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); + + if (NULL == pix_fmts) + return -EINVAL; + + /* store the pixel format in the device object */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* First detach any IRQ if currently attached */ + vpfe_detach_irq(vpfe_dev); + vpfe_dev->fmt = *fmt; + /* set image capture parameters in the ccdc */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); + + pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); + if (NULL == pix_fmts) + return -EINVAL; + return 0; +} + +/* + * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a + * given app input index + */ +static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, + int *subdev_index, + int *subdev_input_index, + int app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (app_input_index < (j + sdinfo->num_inputs)) { + *subdev_index = i; + *subdev_input_index = app_input_index - j; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +/* + * vpfe_get_app_input - Get app input index for a given subdev input index + * driver stores the input index of the current sub device and translate it + * when application request the current input + */ +static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, + int *app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { + if (vpfe_dev->current_input >= sdinfo->num_inputs) + return -1; + *app_input_index = j + vpfe_dev->current_input; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +static int vpfe_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev, index ; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); + + if (vpfe_get_subdev_input_index(vpfe_dev, + &subdev, + &index, + inp->index) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "input information not found" + " for the subdev\n"); + return -EINVAL; + } + sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; + memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); + return 0; +} + +static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); + + return vpfe_get_app_input_index(vpfe_dev, index); +} + + +static int vpfe_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev_index, inp_index; + struct vpfe_route *route; + u32 input = 0, output = 0; + int ret = -EINVAL; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* + * If streaming is started return device busy + * error + */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); + ret = -EBUSY; + goto unlock_out; + } + + if (vpfe_get_subdev_input_index(vpfe_dev, + &subdev_index, + &inp_index, + index) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); + goto unlock_out; + } + + sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; + route = &sdinfo->routes[inp_index]; + if (route && sdinfo->can_route) { + input = route->input; + output = route->output; + } + + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_routing, input, output, 0); + + if (ret) { + v4l2_err(&vpfe_dev->v4l2_dev, + "vpfe_doioctl:error in setting input in decoder\n"); + ret = -EINVAL; + goto unlock_out; + } + vpfe_dev->current_subdev = sdinfo; + vpfe_dev->current_input = index; + vpfe_dev->std_index = 0; + + /* set the bus/interface parameter for the sub device in ccdc */ + ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); + if (ret) + goto unlock_out; + + /* set the default image parameters in the device */ + ret = vpfe_config_image_format(vpfe_dev, + &vpfe_standards[vpfe_dev->std_index].std_id); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + sdinfo = vpfe_dev->current_subdev; + if (ret) + return ret; + /* Call querystd function of decoder device */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, querystd, std_id); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); + + /* Call decoder driver function to set the standard */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + sdinfo = vpfe_dev->current_subdev; + /* If streaming is started, return device busy error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); + ret = -EBUSY; + goto unlock_out; + } + + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + core, s_std, *std_id); + if (ret < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); + goto unlock_out; + } + ret = vpfe_config_image_format(vpfe_dev, std_id); + +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); + + *std_id = vpfe_standards[vpfe_dev->std_index].std_id; + return 0; +} +/* + * Videobuf operations + */ +static int vpfe_videobuf_setup(struct videobuf_queue *vq, + unsigned int *count, + unsigned int *size) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); + *size = vpfe_dev->fmt.fmt.pix.sizeimage; + if (vpfe_dev->memory == V4L2_MEMORY_MMAP && + vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize) + *size = config_params.device_bufsize; + + if (*count < config_params.min_numbuffers) + *count = config_params.min_numbuffers; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "count=%d, size=%d\n", *count, *size); + return 0; +} + +static int vpfe_videobuf_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long addr; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); + + /* If buffer is not initialized, initialize it */ + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = vpfe_dev->fmt.fmt.pix.width; + vb->height = vpfe_dev->fmt.fmt.pix.height; + vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; + vb->field = field; + + ret = videobuf_iolock(vq, vb, NULL); + if (ret < 0) + return ret; + + addr = videobuf_to_dma_contig(vb); + /* Make sure user addresses are aligned to 32 bytes */ + if (!ALIGN(addr, 32)) + return -EINVAL; + + vb->state = VIDEOBUF_PREPARED; + } + return 0; +} + +static void vpfe_videobuf_queue(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and device object */ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + list_add_tail(&vb->queue, &vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + + /* Change state of the buffer */ + vb->state = VIDEOBUF_QUEUED; +} + +static void vpfe_videobuf_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); + + /* + * We need to flush the buffer from the dma queue since + * they are de-allocated + */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + videobuf_dma_contig_free(vq, vb); + vb->state = VIDEOBUF_NEEDS_INIT; +} + +static struct videobuf_queue_ops vpfe_videobuf_qops = { + .buf_setup = vpfe_videobuf_setup, + .buf_prepare = vpfe_videobuf_prepare, + .buf_queue = vpfe_videobuf_queue, + .buf_release = vpfe_videobuf_release, +}; + +/* + * vpfe_reqbufs. currently support REQBUF only once opening + * the device. + */ +static int vpfe_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (vpfe_dev->io_usrs != 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); + ret = -EBUSY; + goto unlock_out; + } + + vpfe_dev->memory = req_buf->memory; + videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, + &vpfe_videobuf_qops, + vpfe_dev->pdev, + &vpfe_dev->irqlock, + req_buf->type, + vpfe_dev->fmt.fmt.pix.field, + sizeof(struct videobuf_buffer), + fh, NULL); + + fh->io_allowed = 1; + vpfe_dev->io_usrs = 1; + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); + return -EINVAL; + } + /* Call videobuf_querybuf to get information */ + return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); +} + +static int vpfe_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* + * If this file handle is not allowed to do IO, + * return error + */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + return videobuf_qbuf(&vpfe_dev->buffer_queue, p); +} + +static int vpfe_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + return videobuf_dqbuf(&vpfe_dev->buffer_queue, + buf, file->f_flags & O_NONBLOCK); +} + +static int vpfe_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qctrl) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + + sdinfo = vpfe_dev->current_subdev; + + return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + core, queryctrl, qctrl); + +} + +static int vpfe_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + + sdinfo = vpfe_dev->current_subdev; + + return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + core, g_ctrl, ctrl); +} + +static int vpfe_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + + sdinfo = vpfe_dev->current_subdev; + + return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + core, s_ctrl, ctrl); +} + +/* + * vpfe_calculate_offsets : This function calculates buffers offset + * for top and bottom field + */ +static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) +{ + struct v4l2_rect image_win; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); + + ccdc_dev->hw_ops.get_image_window(&image_win); + vpfe_dev->field_off = image_win.height * image_win.width; +} + +/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ +static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + ccdc_dev->hw_ops.enable(1); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(1); + vpfe_dev->started = 1; +} + +/* + * vpfe_streamon. Assume the DMA queue is not empty. + * application is expected to call QBUF before calling + * this ioctl. If not, driver returns error + */ +static int vpfe_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + unsigned long addr; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 1); + + if (ret && (ret != -ENOIOCTLCMD)) { + v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); + return -EINVAL; + } + + /* If buffer queue is empty, return error */ + if (list_empty(&vpfe_dev->buffer_queue.stream)) { + v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); + return -EIO; + } + + /* Call videobuf_streamon to start streaming * in videobuf */ + ret = videobuf_streamon(&vpfe_dev->buffer_queue); + if (ret) + return ret; + + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + goto streamoff; + /* Get the next frame from the buffer queue */ + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + vpfe_dev->cur_frm = vpfe_dev->next_frm; + /* Remove buffer from the buffer queue */ + list_del(&vpfe_dev->cur_frm->queue); + /* Mark state of the current frame to active */ + vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; + /* Initialize field_id and started member */ + vpfe_dev->field_id = 0; + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + + /* Calculate field offset */ + vpfe_calculate_offsets(vpfe_dev); + + if (vpfe_attach_irq(vpfe_dev) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in attaching interrupt handle\n"); + ret = -EFAULT; + goto unlock_out; + } + if (ccdc_dev->hw_ops.configure() < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in configuring ccdc\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); + vpfe_start_ccdc_capture(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +unlock_out: + mutex_unlock(&vpfe_dev->lock); +streamoff: + ret = videobuf_streamoff(&vpfe_dev->buffer_queue); + return ret; +} + +static int vpfe_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 0); + + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); + ret = videobuf_streamoff(&vpfe_dev->buffer_queue); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n"); + + if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards)) + return -EINVAL; + + memset(crop, 0, sizeof(struct v4l2_cropcap)); + crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + crop->bounds.width = crop->defrect.width = + vpfe_standards[vpfe_dev->std_index].width; + crop->bounds.height = crop->defrect.height = + vpfe_standards[vpfe_dev->std_index].height; + crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect; + return 0; +} + +static int vpfe_g_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n"); + + crop->c = vpfe_dev->crop; + return 0; +} + +static int vpfe_s_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n"); + + if (vpfe_dev->started) { + /* make sure streaming is not started */ + v4l2_err(&vpfe_dev->v4l2_dev, + "Cannot change crop when streaming is ON\n"); + return -EBUSY; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (crop->c.top < 0 || crop->c.left < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "doesn't support negative values for top & left\n"); + ret = -EINVAL; + goto unlock_out; + } + + /* adjust the width to 16 pixel boundary */ + crop->c.width = ((crop->c.width + 15) & ~0xf); + + /* make sure parameters are valid */ + if ((crop->c.left + crop->c.width > + vpfe_dev->std_info.active_pixels) || + (crop->c.top + crop->c.height > + vpfe_dev->std_info.active_lines)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.set_image_window(&crop->c); + vpfe_dev->fmt.fmt.pix.width = crop->c.width; + vpfe_dev->fmt.fmt.pix.height = crop->c.height; + vpfe_dev->fmt.fmt.pix.bytesperline = + ccdc_dev->hw_ops.get_line_length(); + vpfe_dev->fmt.fmt.pix.sizeimage = + vpfe_dev->fmt.fmt.pix.bytesperline * + vpfe_dev->fmt.fmt.pix.height; + vpfe_dev->crop = crop->c; +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + + +static long vpfe_param_handler(struct file *file, void *priv, + bool valid_prio, int cmd, void *param) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); + + if (vpfe_dev->started) { + /* only allowed if streaming is not started */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "device already started\n"); + return -EBUSY; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + switch (cmd) { + case VPFE_CMD_S_CCDC_RAW_PARAMS: + v4l2_warn(&vpfe_dev->v4l2_dev, + "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n"); + if (ccdc_dev->hw_ops.set_params) { + ret = ccdc_dev->hw_ops.set_params(param); + if (ret) { + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "Error setting parameters in CCDC\n"); + goto unlock_out; + } + if (vpfe_get_ccdc_image_format(vpfe_dev, + &vpfe_dev->fmt) < 0) { + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "Invalid image format at CCDC\n"); + goto unlock_out; + } + } else { + ret = -EINVAL; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n"); + } + break; + default: + ret = -ENOTTY; + } +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + + +/* vpfe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { + .vidioc_querycap = vpfe_querycap, + .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, + .vidioc_enum_input = vpfe_enum_input, + .vidioc_g_input = vpfe_g_input, + .vidioc_s_input = vpfe_s_input, + .vidioc_querystd = vpfe_querystd, + .vidioc_s_std = vpfe_s_std, + .vidioc_g_std = vpfe_g_std, + .vidioc_queryctrl = vpfe_queryctrl, + .vidioc_g_ctrl = vpfe_g_ctrl, + .vidioc_s_ctrl = vpfe_s_ctrl, + .vidioc_reqbufs = vpfe_reqbufs, + .vidioc_querybuf = vpfe_querybuf, + .vidioc_qbuf = vpfe_qbuf, + .vidioc_dqbuf = vpfe_dqbuf, + .vidioc_streamon = vpfe_streamon, + .vidioc_streamoff = vpfe_streamoff, + .vidioc_cropcap = vpfe_cropcap, + .vidioc_g_crop = vpfe_g_crop, + .vidioc_s_crop = vpfe_s_crop, + .vidioc_default = vpfe_param_handler, +}; + +static struct vpfe_device *vpfe_initialize(void) +{ + struct vpfe_device *vpfe_dev; + + /* Default number of buffers should be 3 */ + if ((numbuffers > 0) && + (numbuffers < config_params.min_numbuffers)) + numbuffers = config_params.min_numbuffers; + + /* + * Set buffer size to min buffers size if invalid buffer size is + * given + */ + if (bufsize < config_params.min_bufsize) + bufsize = config_params.min_bufsize; + + config_params.numbuffers = numbuffers; + + if (numbuffers) + config_params.device_bufsize = bufsize; + + /* Allocate memory for device objects */ + vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); + + return vpfe_dev; +} + +/* + * vpfe_probe : This function creates device entries by register + * itself to the V4L2 driver and initializes fields of each + * device objects + */ +static __devinit int vpfe_probe(struct platform_device *pdev) +{ + struct vpfe_subdev_info *sdinfo; + struct vpfe_config *vpfe_cfg; + struct resource *res1; + struct vpfe_device *vpfe_dev; + struct i2c_adapter *i2c_adap; + struct video_device *vfd; + int ret = -ENOMEM, i, j; + int num_subdevs = 0; + + /* Get the pointer to the device object */ + vpfe_dev = vpfe_initialize(); + + if (!vpfe_dev) { + v4l2_err(pdev->dev.driver, + "Failed to allocate memory for vpfe_dev\n"); + return ret; + } + + vpfe_dev->pdev = &pdev->dev; + + if (NULL == pdev->dev.platform_data) { + v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); + ret = -ENODEV; + goto probe_free_dev_mem; + } + + vpfe_cfg = pdev->dev.platform_data; + vpfe_dev->cfg = vpfe_cfg; + if (NULL == vpfe_cfg->ccdc || + NULL == vpfe_cfg->card_name || + NULL == vpfe_cfg->sub_devs) { + v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); + ret = -ENOENT; + goto probe_free_dev_mem; + } + + /* Allocate memory for ccdc configuration */ + ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL); + if (NULL == ccdc_cfg) { + v4l2_err(pdev->dev.driver, + "Memory allocation failed for ccdc_cfg\n"); + goto probe_free_lock; + } + + mutex_lock(&ccdc_lock); + + strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32); + /* Get VINT0 irq resource */ + res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT0\n"); + ret = -ENODEV; + goto probe_free_ccdc_cfg_mem; + } + vpfe_dev->ccdc_irq0 = res1->start; + + /* Get VINT1 irq resource */ + res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT1\n"); + ret = -ENODEV; + goto probe_free_ccdc_cfg_mem; + } + vpfe_dev->ccdc_irq1 = res1->start; + + ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED, + "vpfe_capture0", vpfe_dev); + + if (0 != ret) { + v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); + goto probe_free_ccdc_cfg_mem; + } + + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (NULL == vfd) { + ret = -ENOMEM; + v4l2_err(pdev->dev.driver, "Unable to alloc video device\n"); + goto probe_out_release_irq; + } + + /* Initialize field of video device */ + vfd->release = video_device_release; + vfd->fops = &vpfe_fops; + vfd->ioctl_ops = &vpfe_ioctl_ops; + vfd->tvnorms = 0; + vfd->current_norm = V4L2_STD_PAL; + vfd->v4l2_dev = &vpfe_dev->v4l2_dev; + snprintf(vfd->name, sizeof(vfd->name), + "%s_V%d.%d.%d", + CAPTURE_DRV_NAME, + (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, + (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, + (VPFE_CAPTURE_VERSION_CODE) & 0xff); + /* Set video_dev to the video device */ + vpfe_dev->video_dev = vfd; + + ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register v4l2 device.\n"); + goto probe_out_video_release; + } + v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); + spin_lock_init(&vpfe_dev->irqlock); + spin_lock_init(&vpfe_dev->dma_queue_lock); + mutex_init(&vpfe_dev->lock); + + /* Initialize field of the device objects */ + vpfe_dev->numbuffers = config_params.numbuffers; + + /* Initialize prio member of device object */ + v4l2_prio_init(&vpfe_dev->prio); + /* register video device */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "trying to register vpfe device.\n"); + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "video_dev=%x\n", (int)&vpfe_dev->video_dev); + vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + ret = video_register_device(vpfe_dev->video_dev, + VFL_TYPE_GRABBER, -1); + + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register video device.\n"); + goto probe_out_v4l2_unregister; + } + + v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpfe_dev); + /* set driver private data */ + video_set_drvdata(vpfe_dev->video_dev, vpfe_dev); + i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); + num_subdevs = vpfe_cfg->num_subdevs; + vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs, + GFP_KERNEL); + if (NULL == vpfe_dev->sd) { + v4l2_err(&vpfe_dev->v4l2_dev, + "unable to allocate memory for subdevice pointers\n"); + ret = -ENOMEM; + goto probe_out_video_unregister; + } + + for (i = 0; i < num_subdevs; i++) { + struct v4l2_input *inps; + + sdinfo = &vpfe_cfg->sub_devs[i]; + + /* Load up the subdevice */ + vpfe_dev->sd[i] = + v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, + i2c_adap, + &sdinfo->board_info, + NULL); + if (vpfe_dev->sd[i]) { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + sdinfo->name); + vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; + /* update tvnorms from the sub devices */ + for (j = 0; j < sdinfo->num_inputs; j++) { + inps = &sdinfo->inputs[j]; + vfd->tvnorms |= inps->std; + } + } else { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s register fails\n", + sdinfo->name); + goto probe_sd_out; + } + } + + /* set first sub device as current one */ + vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; + + /* We have at least one sub device to work with */ + mutex_unlock(&ccdc_lock); + return 0; + +probe_sd_out: + kfree(vpfe_dev->sd); +probe_out_video_unregister: + video_unregister_device(vpfe_dev->video_dev); +probe_out_v4l2_unregister: + v4l2_device_unregister(&vpfe_dev->v4l2_dev); +probe_out_video_release: + if (!video_is_registered(vpfe_dev->video_dev)) + video_device_release(vpfe_dev->video_dev); +probe_out_release_irq: + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); +probe_free_ccdc_cfg_mem: + kfree(ccdc_cfg); +probe_free_lock: + mutex_unlock(&ccdc_lock); +probe_free_dev_mem: + kfree(vpfe_dev); + return ret; +} + +/* + * vpfe_remove : It un-register device from V4L2 driver + */ +static int __devexit vpfe_remove(struct platform_device *pdev) +{ + struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); + + v4l2_info(pdev->dev.driver, "vpfe_remove\n"); + + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); + kfree(vpfe_dev->sd); + v4l2_device_unregister(&vpfe_dev->v4l2_dev); + video_unregister_device(vpfe_dev->video_dev); + kfree(vpfe_dev); + kfree(ccdc_cfg); + return 0; +} + +static int vpfe_suspend(struct device *dev) +{ + return 0; +} + +static int vpfe_resume(struct device *dev) +{ + return 0; +} + +static const struct dev_pm_ops vpfe_dev_pm_ops = { + .suspend = vpfe_suspend, + .resume = vpfe_resume, +}; + +static struct platform_driver vpfe_driver = { + .driver = { + .name = CAPTURE_DRV_NAME, + .owner = THIS_MODULE, + .pm = &vpfe_dev_pm_ops, + }, + .probe = vpfe_probe, + .remove = __devexit_p(vpfe_remove), +}; + +module_platform_driver(vpfe_driver); diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c new file mode 100644 index 00000000000..9bd3caa34a3 --- /dev/null +++ b/drivers/media/platform/davinci/vpif.c @@ -0,0 +1,514 @@ +/* + * vpif - Video Port Interface driver + * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) + * that receiveing video byte stream and two channels(2, 3) for video output. + * The hardware supports SDTV, HDTV formats, raw data capture. + * Currently, the driver supports NTSC and PAL standards. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <mach/hardware.h> + +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); +MODULE_LICENSE("GPL"); + +#define VPIF_CH0_MAX_MODES (22) +#define VPIF_CH1_MAX_MODES (02) +#define VPIF_CH2_MAX_MODES (15) +#define VPIF_CH3_MAX_MODES (02) + +static resource_size_t res_len; +static struct resource *res; +spinlock_t vpif_lock; + +void __iomem *vpif_base; +struct clk *vpif_clk; + +/** + * ch_params: video standard configuration parameters for vpif + * The table must include all presets from supported subdevices. + */ +const struct vpif_channel_config_params ch_params[] = { + /* HDTV formats */ + { + .name = "480p59_94", + .width = 720, + .height = 480, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 138-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 43, + .l5 = 523, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_480P59_94, + }, + { + .name = "576p50", + .width = 720, + .height = 576, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 144-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 45, + .l5 = 621, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_576P50, + }, + { + .name = "720p50", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 700-8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P50, + }, + { + .name = "720p60", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 370 - 8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P60, + }, + { + .name = "1080I50", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 720 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I50, + }, + { + .name = "1080I60", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I60, + }, + { + .name = "1080p60", + .width = 1920, + .height = 1080, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 42, + .l5 = 1122, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080P60, + }, + + /* SDTV formats */ + { + .name = "NTSC_M", + .width = 720, + .height = 480, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 268, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 263, + .l7 = 266, + .l9 = 286, + .l11 = 525, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_525_60, + }, + { + .name = "PAL_BDGHIK", + .width = 720, + .height = 576, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 280, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 311, + .l7 = 313, + .l9 = 336, + .l11 = 624, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_625_50, + }, +}; + +const unsigned int vpif_ch_params_count = ARRAY_SIZE(ch_params); + +static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) +{ + if (val) + vpif_set_bit(reg, bit); + else + vpif_clr_bit(reg, bit); +} + +/* This structure is used to keep track of VPIF size register's offsets */ +struct vpif_registers { + u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; + u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; + u32 vanc1_size, width_mask, len_mask; + u8 max_modes; +}; + +static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { + /* Channel0 */ + { + VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, + VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, + VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH0_MAX_MODES, + }, + /* Channel1 */ + { + VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, + VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, + VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH1_MAX_MODES, + }, + /* Channel2 */ + { + VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, + VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, + VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, + VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH2_MAX_MODES + }, + /* Channel3 */ + { + VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, + VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, + VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, + VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH3_MAX_MODES + }, +}; + +/* vpif_set_mode_info: + * This function is used to set horizontal and vertical config parameters + * As per the standard in the channel, configure the values of L1, L3, + * L5, L7 L9, L11 in VPIF Register , also write width and height + */ +static void vpif_set_mode_info(const struct vpif_channel_config_params *config, + u8 channel_id, u8 config_channel_id) +{ + u32 value; + + value = (config->eav2sav & vpifregs[config_channel_id].width_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); + regw(value, vpifregs[channel_id].h_cfg); + + value = (config->l1 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l3 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_00); + + value = (config->l5 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l7 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_01); + + value = (config->l9 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l11 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_02); + + value = (config->vsize & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg); +} + +/* config_vpif_params + * Function to set the parameters of a channel + * Mainly modifies the channel ciontrol register + * It sets frame format, yc mux mode + */ +static void config_vpif_params(struct vpif_params *vpifparams, + u8 channel_id, u8 found) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + u32 value, ch_nip, reg; + u8 start, end; + int i; + + start = channel_id; + end = channel_id + found; + + for (i = start; i < end; i++) { + reg = vpifregs[i].ch_ctrl; + if (channel_id < 2) + ch_nip = VPIF_CAPTURE_CH_NIP; + else + ch_nip = VPIF_DISPLAY_CH_NIP; + + vpif_wr_bit(reg, ch_nip, config->frm_fmt); + vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); + vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, + vpifparams->video_params.storage_mode); + + /* Set raster scanning SDR Format */ + vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); + vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); + + if (channel_id > 1) /* Set the Pixel enable bit */ + vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); + else if (config->capture_format) { + /* Set the polarity of various pins */ + vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, + vpifparams->iface.fid_pol); + vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, + vpifparams->iface.vd_pol); + vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, + vpifparams->iface.hd_pol); + + value = regr(reg); + /* Set data width */ + value &= ~(0x3u << + VPIF_CH_DATA_WIDTH_BIT); + value |= ((vpifparams->params.data_sz) << + VPIF_CH_DATA_WIDTH_BIT); + regw(value, reg); + } + + /* Write the pitch in the driver */ + regw((vpifparams->video_params.hpitch), + vpifregs[i].line_offset); + } +} + +/* vpif_set_video_params + * This function is used to set video parameters in VPIF register + */ +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + int found = 1; + + vpif_set_mode_info(config, channel_id, channel_id); + if (!config->ycmux_mode) { + /* YC are on separate channels (HDTV formats) */ + vpif_set_mode_info(config, channel_id + 1, channel_id); + found = 2; + } + + config_vpif_params(vpifparams, channel_id, found); + + regw(0x80, VPIF_REQ_SIZE); + regw(0x01, VPIF_EMULATION_CTRL); + + return found; +} +EXPORT_SYMBOL(vpif_set_video_params); + +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id) +{ + u32 value; + + value = 0x3F8 & (vbiparams->hstart0); + value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); + regw(value, vpifregs[channel_id].vanc0_strt); + + value = 0x3F8 & (vbiparams->hstart1); + value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); + regw(value, vpifregs[channel_id].vanc1_strt); + + value = 0x3F8 & (vbiparams->hsize0); + value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); + regw(value, vpifregs[channel_id].vanc0_size); + + value = 0x3F8 & (vbiparams->hsize1); + value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); + regw(value, vpifregs[channel_id].vanc1_size); + +} +EXPORT_SYMBOL(vpif_set_vbi_display_params); + +int vpif_channel_getfid(u8 channel_id) +{ + return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) + >> VPIF_CH_FID_SHIFT; +} +EXPORT_SYMBOL(vpif_channel_getfid); + +static int __devinit vpif_probe(struct platform_device *pdev) +{ + int status = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + res_len = resource_size(res); + + res = request_mem_region(res->start, res_len, res->name); + if (!res) + return -EBUSY; + + vpif_base = ioremap(res->start, res_len); + if (!vpif_base) { + status = -EBUSY; + goto fail; + } + + vpif_clk = clk_get(&pdev->dev, "vpif"); + if (IS_ERR(vpif_clk)) { + status = PTR_ERR(vpif_clk); + goto clk_fail; + } + clk_enable(vpif_clk); + + spin_lock_init(&vpif_lock); + dev_info(&pdev->dev, "vpif probe success\n"); + return 0; + +clk_fail: + iounmap(vpif_base); +fail: + release_mem_region(res->start, res_len); + return status; +} + +static int __devexit vpif_remove(struct platform_device *pdev) +{ + if (vpif_clk) { + clk_disable(vpif_clk); + clk_put(vpif_clk); + } + + iounmap(vpif_base); + release_mem_region(res->start, res_len); + return 0; +} + +#ifdef CONFIG_PM +static int vpif_suspend(struct device *dev) +{ + clk_disable(vpif_clk); + return 0; +} + +static int vpif_resume(struct device *dev) +{ + clk_enable(vpif_clk); + return 0; +} + +static const struct dev_pm_ops vpif_pm = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_pm) +#else +#define vpif_pm_ops NULL +#endif + +static struct platform_driver vpif_driver = { + .driver = { + .name = "vpif", + .owner = THIS_MODULE, + .pm = vpif_pm_ops, + }, + .remove = __devexit_p(vpif_remove), + .probe = vpif_probe, +}; + +static void vpif_exit(void) +{ + platform_driver_unregister(&vpif_driver); +} + +static int __init vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} +subsys_initcall(vpif_init); +module_exit(vpif_exit); + diff --git a/drivers/media/platform/davinci/vpif.h b/drivers/media/platform/davinci/vpif.h new file mode 100644 index 00000000000..c2ce4d97c27 --- /dev/null +++ b/drivers/media/platform/davinci/vpif.h @@ -0,0 +1,688 @@ +/* + * VPIF header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VPIF_H +#define VPIF_H + +#include <linux/io.h> +#include <linux/videodev2.h> +#include <media/davinci/vpif_types.h> + +/* Maximum channel allowed */ +#define VPIF_NUM_CHANNELS (4) +#define VPIF_CAPTURE_NUM_CHANNELS (2) +#define VPIF_DISPLAY_NUM_CHANNELS (2) + +/* Macros to read/write registers */ +extern void __iomem *vpif_base; +extern spinlock_t vpif_lock; + +#define regr(reg) readl((reg) + vpif_base) +#define regw(value, reg) writel(value, (reg + vpif_base)) + +/* Register Address Offsets */ +#define VPIF_PID (0x0000) +#define VPIF_CH0_CTRL (0x0004) +#define VPIF_CH1_CTRL (0x0008) +#define VPIF_CH2_CTRL (0x000C) +#define VPIF_CH3_CTRL (0x0010) + +#define VPIF_INTEN (0x0020) +#define VPIF_INTEN_SET (0x0024) +#define VPIF_INTEN_CLR (0x0028) +#define VPIF_STATUS (0x002C) +#define VPIF_STATUS_CLR (0x0030) +#define VPIF_EMULATION_CTRL (0x0034) +#define VPIF_REQ_SIZE (0x0038) + +#define VPIF_CH0_TOP_STRT_ADD_LUMA (0x0040) +#define VPIF_CH0_BTM_STRT_ADD_LUMA (0x0044) +#define VPIF_CH0_TOP_STRT_ADD_CHROMA (0x0048) +#define VPIF_CH0_BTM_STRT_ADD_CHROMA (0x004c) +#define VPIF_CH0_TOP_STRT_ADD_HANC (0x0050) +#define VPIF_CH0_BTM_STRT_ADD_HANC (0x0054) +#define VPIF_CH0_TOP_STRT_ADD_VANC (0x0058) +#define VPIF_CH0_BTM_STRT_ADD_VANC (0x005c) +#define VPIF_CH0_SP_CFG (0x0060) +#define VPIF_CH0_IMG_ADD_OFST (0x0064) +#define VPIF_CH0_HANC_ADD_OFST (0x0068) +#define VPIF_CH0_H_CFG (0x006c) +#define VPIF_CH0_V_CFG_00 (0x0070) +#define VPIF_CH0_V_CFG_01 (0x0074) +#define VPIF_CH0_V_CFG_02 (0x0078) +#define VPIF_CH0_V_CFG_03 (0x007c) + +#define VPIF_CH1_TOP_STRT_ADD_LUMA (0x0080) +#define VPIF_CH1_BTM_STRT_ADD_LUMA (0x0084) +#define VPIF_CH1_TOP_STRT_ADD_CHROMA (0x0088) +#define VPIF_CH1_BTM_STRT_ADD_CHROMA (0x008c) +#define VPIF_CH1_TOP_STRT_ADD_HANC (0x0090) +#define VPIF_CH1_BTM_STRT_ADD_HANC (0x0094) +#define VPIF_CH1_TOP_STRT_ADD_VANC (0x0098) +#define VPIF_CH1_BTM_STRT_ADD_VANC (0x009c) +#define VPIF_CH1_SP_CFG (0x00a0) +#define VPIF_CH1_IMG_ADD_OFST (0x00a4) +#define VPIF_CH1_HANC_ADD_OFST (0x00a8) +#define VPIF_CH1_H_CFG (0x00ac) +#define VPIF_CH1_V_CFG_00 (0x00b0) +#define VPIF_CH1_V_CFG_01 (0x00b4) +#define VPIF_CH1_V_CFG_02 (0x00b8) +#define VPIF_CH1_V_CFG_03 (0x00bc) + +#define VPIF_CH2_TOP_STRT_ADD_LUMA (0x00c0) +#define VPIF_CH2_BTM_STRT_ADD_LUMA (0x00c4) +#define VPIF_CH2_TOP_STRT_ADD_CHROMA (0x00c8) +#define VPIF_CH2_BTM_STRT_ADD_CHROMA (0x00cc) +#define VPIF_CH2_TOP_STRT_ADD_HANC (0x00d0) +#define VPIF_CH2_BTM_STRT_ADD_HANC (0x00d4) +#define VPIF_CH2_TOP_STRT_ADD_VANC (0x00d8) +#define VPIF_CH2_BTM_STRT_ADD_VANC (0x00dc) +#define VPIF_CH2_SP_CFG (0x00e0) +#define VPIF_CH2_IMG_ADD_OFST (0x00e4) +#define VPIF_CH2_HANC_ADD_OFST (0x00e8) +#define VPIF_CH2_H_CFG (0x00ec) +#define VPIF_CH2_V_CFG_00 (0x00f0) +#define VPIF_CH2_V_CFG_01 (0x00f4) +#define VPIF_CH2_V_CFG_02 (0x00f8) +#define VPIF_CH2_V_CFG_03 (0x00fc) +#define VPIF_CH2_HANC0_STRT (0x0100) +#define VPIF_CH2_HANC0_SIZE (0x0104) +#define VPIF_CH2_HANC1_STRT (0x0108) +#define VPIF_CH2_HANC1_SIZE (0x010c) +#define VPIF_CH2_VANC0_STRT (0x0110) +#define VPIF_CH2_VANC0_SIZE (0x0114) +#define VPIF_CH2_VANC1_STRT (0x0118) +#define VPIF_CH2_VANC1_SIZE (0x011c) + +#define VPIF_CH3_TOP_STRT_ADD_LUMA (0x0140) +#define VPIF_CH3_BTM_STRT_ADD_LUMA (0x0144) +#define VPIF_CH3_TOP_STRT_ADD_CHROMA (0x0148) +#define VPIF_CH3_BTM_STRT_ADD_CHROMA (0x014c) +#define VPIF_CH3_TOP_STRT_ADD_HANC (0x0150) +#define VPIF_CH3_BTM_STRT_ADD_HANC (0x0154) +#define VPIF_CH3_TOP_STRT_ADD_VANC (0x0158) +#define VPIF_CH3_BTM_STRT_ADD_VANC (0x015c) +#define VPIF_CH3_SP_CFG (0x0160) +#define VPIF_CH3_IMG_ADD_OFST (0x0164) +#define VPIF_CH3_HANC_ADD_OFST (0x0168) +#define VPIF_CH3_H_CFG (0x016c) +#define VPIF_CH3_V_CFG_00 (0x0170) +#define VPIF_CH3_V_CFG_01 (0x0174) +#define VPIF_CH3_V_CFG_02 (0x0178) +#define VPIF_CH3_V_CFG_03 (0x017c) +#define VPIF_CH3_HANC0_STRT (0x0180) +#define VPIF_CH3_HANC0_SIZE (0x0184) +#define VPIF_CH3_HANC1_STRT (0x0188) +#define VPIF_CH3_HANC1_SIZE (0x018c) +#define VPIF_CH3_VANC0_STRT (0x0190) +#define VPIF_CH3_VANC0_SIZE (0x0194) +#define VPIF_CH3_VANC1_STRT (0x0198) +#define VPIF_CH3_VANC1_SIZE (0x019c) + +#define VPIF_IODFT_CTRL (0x01c0) + +/* Functions for bit Manipulation */ +static inline void vpif_set_bit(u32 reg, u32 bit) +{ + regw((regr(reg)) | (0x01 << bit), reg); +} + +static inline void vpif_clr_bit(u32 reg, u32 bit) +{ + regw(((regr(reg)) & ~(0x01 << bit)), reg); +} + +/* Macro for Generating mask */ +#ifdef GENERATE_MASK +#undef GENERATE_MASK +#endif + +#define GENERATE_MASK(bits, pos) \ + ((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos) + +/* Bit positions in the channel control registers */ +#define VPIF_CH_DATA_MODE_BIT (2) +#define VPIF_CH_YC_MUX_BIT (3) +#define VPIF_CH_SDR_FMT_BIT (4) +#define VPIF_CH_HANC_EN_BIT (8) +#define VPIF_CH_VANC_EN_BIT (9) + +#define VPIF_CAPTURE_CH_NIP (10) +#define VPIF_DISPLAY_CH_NIP (11) + +#define VPIF_DISPLAY_PIX_EN_BIT (10) + +#define VPIF_CH_INPUT_FIELD_FRAME_BIT (12) + +#define VPIF_CH_FID_POLARITY_BIT (15) +#define VPIF_CH_V_VALID_POLARITY_BIT (14) +#define VPIF_CH_H_VALID_POLARITY_BIT (13) +#define VPIF_CH_DATA_WIDTH_BIT (28) + +#define VPIF_CH_CLK_EDGE_CTRL_BIT (31) + +/* Mask various length */ +#define VPIF_CH_EAVSAV_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_MASK GENERATE_MASK(12, 0) +#define VPIF_CH_WIDTH_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_SHIFT (16) + +/* VPIF masks for registers */ +#define VPIF_REQ_SIZE_MASK (0x1ff) + +/* bit posotion of interrupt vpif_ch_intr register */ +#define VPIF_INTEN_FRAME_CH0 (0x00000001) +#define VPIF_INTEN_FRAME_CH1 (0x00000002) +#define VPIF_INTEN_FRAME_CH2 (0x00000004) +#define VPIF_INTEN_FRAME_CH3 (0x00000008) + +/* bit position of clock and channel enable in vpif_chn_ctrl register */ + +#define VPIF_CH0_CLK_EN (0x00000002) +#define VPIF_CH0_EN (0x00000001) +#define VPIF_CH1_CLK_EN (0x00000002) +#define VPIF_CH1_EN (0x00000001) +#define VPIF_CH2_CLK_EN (0x00000002) +#define VPIF_CH2_EN (0x00000001) +#define VPIF_CH3_CLK_EN (0x00000002) +#define VPIF_CH3_EN (0x00000001) +#define VPIF_CH_CLK_EN (0x00000002) +#define VPIF_CH_EN (0x00000001) + +#define VPIF_INT_TOP (0x00) +#define VPIF_INT_BOTTOM (0x01) +#define VPIF_INT_BOTH (0x02) + +#define VPIF_CH0_INT_CTRL_SHIFT (6) +#define VPIF_CH1_INT_CTRL_SHIFT (6) +#define VPIF_CH2_INT_CTRL_SHIFT (6) +#define VPIF_CH3_INT_CTRL_SHIFT (6) +#define VPIF_CH_INT_CTRL_SHIFT (6) + +#define VPIF_CH2_CLIP_ANC_EN 14 +#define VPIF_CH2_CLIP_ACTIVE_EN 13 + +#define VPIF_CH3_CLIP_ANC_EN 14 +#define VPIF_CH3_CLIP_ACTIVE_EN 13 + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel0_intr_assert() (regw((regr(VPIF_CH0_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel1_intr_assert() (regw((regr(VPIF_CH1_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel2_intr_assert() (regw((regr(VPIF_CH2_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel3_intr_assert() (regw((regr(VPIF_CH3_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL)) + +#define VPIF_CH_FID_MASK (0x20) +#define VPIF_CH_FID_SHIFT (5) + +#define VPIF_NTSC_VBI_START_FIELD0 (1) +#define VPIF_NTSC_VBI_START_FIELD1 (263) +#define VPIF_PAL_VBI_START_FIELD0 (624) +#define VPIF_PAL_VBI_START_FIELD1 (311) + +#define VPIF_NTSC_HBI_START_FIELD0 (1) +#define VPIF_NTSC_HBI_START_FIELD1 (263) +#define VPIF_PAL_HBI_START_FIELD0 (624) +#define VPIF_PAL_HBI_START_FIELD1 (311) + +#define VPIF_NTSC_VBI_COUNT_FIELD0 (20) +#define VPIF_NTSC_VBI_COUNT_FIELD1 (19) +#define VPIF_PAL_VBI_COUNT_FIELD0 (24) +#define VPIF_PAL_VBI_COUNT_FIELD1 (25) + +#define VPIF_NTSC_HBI_COUNT_FIELD0 (263) +#define VPIF_NTSC_HBI_COUNT_FIELD1 (262) +#define VPIF_PAL_HBI_COUNT_FIELD0 (312) +#define VPIF_PAL_HBI_COUNT_FIELD1 (313) + +#define VPIF_NTSC_VBI_SAMPLES_PER_LINE (720) +#define VPIF_PAL_VBI_SAMPLES_PER_LINE (720) +#define VPIF_NTSC_HBI_SAMPLES_PER_LINE (268) +#define VPIF_PAL_HBI_SAMPLES_PER_LINE (280) + +#define VPIF_CH_VANC_EN (0x20) +#define VPIF_DMA_REQ_SIZE (0x080) +#define VPIF_EMULATION_DISABLE (0x01) + +extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS]; + +/* inline function to enable/disable channel0 */ +static inline void enable_channel0(int enable) +{ + if (enable) + regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL); + else + regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL); +} + +/* inline function to enable/disable channel1 */ +static inline void enable_channel1(int enable) +{ + if (enable) + regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL); + else + regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL); +} + +/* inline function to enable interrupt for channel0 */ +static inline void channel0_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to enable interrupt for channel1 */ +static inline void channel1_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA); +} + +static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + + regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +static inline void ch0_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC); +} + +static inline void ch0_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC); +} + +static inline void ch1_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC); +} + +static inline void ch1_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC); +} + +/* Inline function to enable raw vbi in the given channel */ +static inline void disable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +static inline void enable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +/* inline function to enable/disable channel2 */ +static inline void enable_channel2(int enable) +{ + if (enable) { + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL); + } else { + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL); + } +} + +/* inline function to enable/disable channel3 */ +static inline void enable_channel3(int enable) +{ + if (enable) { + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL); + } else { + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL); + } +} + +/* inline function to enable interrupt for channel2 */ +static inline void channel2_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to enable interrupt for channel3 */ +static inline void channel3_intr_enable(int enable) +{ + unsigned long flags; + + spin_lock_irqsave(&vpif_lock, flags); + + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } + spin_unlock_irqrestore(&vpif_lock, flags); +} + +/* inline function to enable raw vbi data for channel2 */ +static inline void channel2_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH2_CTRL, mask); + else + vpif_clr_bit(VPIF_CH2_CTRL, mask); +} + +/* inline function to enable raw vbi data for channel3*/ +static inline void channel3_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH3_CTRL, mask); + else + vpif_clr_bit(VPIF_CH3_CTRL, mask); +} + +/* function to enable clipping (for both active and blanking regions) on ch 2 */ +static inline void channel2_clipping_enable(int enable) +{ + if (enable) { + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN); + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN); + } else { + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN); + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN); + } +} + +/* function to enable clipping (for both active and blanking regions) on ch 2 */ +static inline void channel3_clipping_enable(int enable) +{ + if (enable) { + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN); + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN); + } else { + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN); + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN); + } +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA); +} + +static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for vbi data */ +static inline void ch2_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC); +} + +static inline void ch3_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC); +} + +static inline int vpif_intr_status(int channel) +{ + int status = 0; + int mask; + + if (channel < 0 || channel > 3) + return 0; + + mask = 1 << channel; + status = regr(VPIF_STATUS) & mask; + regw(status, VPIF_STATUS_CLR); + + return status; +} + +#define VPIF_MAX_NAME (30) + +/* This structure will store size parameters as per the mode selected by user */ +struct vpif_channel_config_params { + char name[VPIF_MAX_NAME]; /* Name of the mode */ + u16 width; /* Indicates width of the image */ + u16 height; /* Indicates height of the image */ + u8 frm_fmt; /* Interlaced (0) or progressive (1) */ + u8 ycmux_mode; /* This mode requires one (0) or two (1) + channels */ + u16 eav2sav; /* length of eav 2 sav */ + u16 sav2eav; /* length of sav 2 eav */ + u16 l1, l3, l5, l7, l9, l11; /* Other parameter configurations */ + u16 vsize; /* Vertical size of the image */ + u8 capture_format; /* Indicates whether capture format + * is in BT or in CCD/CMOS */ + u8 vbi_supported; /* Indicates whether this mode + * supports capturing vbi or not */ + u8 hd_sd; /* HDTV (1) or SDTV (0) format */ + v4l2_std_id stdid; /* SDTV format */ + u32 dv_preset; /* HDTV format */ +}; + +extern const unsigned int vpif_ch_params_count; +extern const struct vpif_channel_config_params ch_params[]; + +struct vpif_video_params; +struct vpif_params; +struct vpif_vbi_params; + +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id); +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id); +int vpif_channel_getfid(u8 channel_id); + +enum data_size { + _8BITS = 0, + _10BITS, + _12BITS, +}; + +/* Structure for vpif parameters for raw vbi data */ +struct vpif_vbi_params { + __u32 hstart0; /* Horizontal start of raw vbi data for first field */ + __u32 vstart0; /* Vertical start of raw vbi data for first field */ + __u32 hsize0; /* Horizontal size of raw vbi data for first field */ + __u32 vsize0; /* Vertical size of raw vbi data for first field */ + __u32 hstart1; /* Horizontal start of raw vbi data for second field */ + __u32 vstart1; /* Vertical start of raw vbi data for second field */ + __u32 hsize1; /* Horizontal size of raw vbi data for second field */ + __u32 vsize1; /* Vertical size of raw vbi data for second field */ +}; + +/* structure for vpif parameters */ +struct vpif_video_params { + __u8 storage_mode; /* Indicates field or frame mode */ + unsigned long hpitch; + v4l2_std_id stdid; +}; + +struct vpif_params { + struct vpif_interface iface; + struct vpif_video_params video_params; + struct vpif_channel_config_params std_info; + union param { + struct vpif_vbi_params vbi_params; + enum data_size data_sz; + } params; +}; + +#endif /* End of #ifndef VPIF_H */ + diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c new file mode 100644 index 00000000000..1b625b065c3 --- /dev/null +++ b/drivers/media/platform/davinci/vpif_capture.c @@ -0,0 +1,2456 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * TODO : add support for VBI & HBI data service + * add static buffer allocation + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/string.h> +#include <linux/videodev2.h> +#include <linux/wait.h> +#include <linux/time.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-chip-ident.h> + +#include "vpif_capture.h" +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VPIF_CAPTURE_VERSION); + +#define vpif_err(fmt, arg...) v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg) +#define vpif_dbg(level, debug, fmt, arg...) \ + v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg) + +static int debug = 1; +static u32 ch0_numbuffers = 3; +static u32 ch1_numbuffers = 3; +static u32 ch0_bufsize = 1920 * 1080 * 2; +static u32 ch1_bufsize = 720 * 576 * 2; + +module_param(debug, int, 0644); +module_param(ch0_numbuffers, uint, S_IRUGO); +module_param(ch1_numbuffers, uint, S_IRUGO); +module_param(ch0_bufsize, uint, S_IRUGO); +module_param(ch1_bufsize, uint, S_IRUGO); + +MODULE_PARM_DESC(debug, "Debug level 0-1"); +MODULE_PARM_DESC(ch2_numbuffers, "Channel0 buffer count (default:3)"); +MODULE_PARM_DESC(ch3_numbuffers, "Channel1 buffer count (default:3)"); +MODULE_PARM_DESC(ch2_bufsize, "Channel0 buffer size (default:1920 x 1080 x 2)"); +MODULE_PARM_DESC(ch3_bufsize, "Channel1 buffer size (default:720 x 576 x 2)"); + +static struct vpif_config_params config_params = { + .min_numbuffers = 3, + .numbuffers[0] = 3, + .numbuffers[1] = 3, + .min_bufsize[0] = 720 * 480 * 2, + .min_bufsize[1] = 720 * 480 * 2, + .channel_bufsize[0] = 1920 * 1080 * 2, + .channel_bufsize[1] = 720 * 576 * 2, +}; + +/* global variables */ +static struct vpif_device vpif_obj = { {NULL} }; +static struct device *vpif_dev; +static void vpif_calculate_offsets(struct channel_obj *ch); +static void vpif_config_addr(struct channel_obj *ch, int muxmode); + +/** + * buffer_prepare : callback function for buffer prepare + * @vb: ptr to vb2_buffer + * + * This is the callback function for buffer prepare when vb2_qbuf() + * function is called. The buffer is prepared and user space virtual address + * or user address is converted into physical address + */ +static int vpif_buffer_prepare(struct vb2_buffer *vb) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_queue *q = vb->vb2_queue; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long addr; + + vpif_dbg(2, debug, "vpif_buffer_prepare\n"); + + common = &ch->common[VPIF_VIDEO_INDEX]; + + if (vb->state != VB2_BUF_STATE_ACTIVE && + vb->state != VB2_BUF_STATE_PREPARED) { + vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage); + if (vb2_plane_vaddr(vb, 0) && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) + goto exit; + addr = vb2_dma_contig_plane_dma_addr(vb, 0); + + if (q->streaming) { + if (!IS_ALIGNED((addr + common->ytop_off), 8) || + !IS_ALIGNED((addr + common->ybtm_off), 8) || + !IS_ALIGNED((addr + common->ctop_off), 8) || + !IS_ALIGNED((addr + common->cbtm_off), 8)) + goto exit; + } + } + return 0; +exit: + vpif_dbg(1, debug, "buffer_prepare:offset is not aligned to 8 bytes\n"); + return -EINVAL; +} + +/** + * vpif_buffer_queue_setup : Callback function for buffer setup. + * @vq: vb2_queue ptr + * @fmt: v4l2 format + * @nbuffers: ptr to number of buffers requested by application + * @nplanes:: contains number of distinct video planes needed to hold a frame + * @sizes[]: contains the size (in bytes) of each plane. + * @alloc_ctxs: ptr to allocation context + * + * This callback function is called when reqbuf() is called to adjust + * the buffer count and buffer size + */ +static int vpif_buffer_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long size; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_buffer_setup\n"); + + /* If memory type is not mmap, return */ + if (V4L2_MEMORY_MMAP == common->memory) { + /* Calculate the size of the buffer */ + size = config_params.channel_bufsize[ch->channel_id]; + /* + * Checking if the buffer size exceeds the available buffer + * ycmux_mode = 0 means 1 channel mode HD and + * ycmux_mode = 1 means 2 channels mode SD + */ + if (ch->vpifparams.std_info.ycmux_mode == 0) { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + (config_params.video_limit[0] + + config_params.video_limit[1])) + (*nbuffers)--; + } else { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + config_params.video_limit[ch->channel_id]) + (*nbuffers)--; + } + + } else { + size = common->fmt.fmt.pix.sizeimage; + } + + if (*nbuffers < config_params.min_numbuffers) + *nbuffers = config_params.min_numbuffers; + + *nplanes = 1; + sizes[0] = size; + alloc_ctxs[0] = common->alloc_ctx; + + return 0; +} + +/** + * vpif_buffer_queue : Callback function to add buffer to DMA queue + * @vb: ptr to vb2_buffer + */ +static void vpif_buffer_queue(struct vb2_buffer *vb) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct channel_obj *ch = fh->channel; + struct vpif_cap_buffer *buf = container_of(vb, + struct vpif_cap_buffer, vb); + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + list_add_tail(&buf->list, &common->dma_queue); +} + +/** + * vpif_buf_cleanup : Callback function to free buffer + * @vb: ptr to vb2_buffer + * + * This function is called from the videobuf2 layer to free memory + * allocated to the buffers + */ +static void vpif_buf_cleanup(struct vb2_buffer *vb) +{ + /* Get the file handle object and channel object */ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpif_cap_buffer *buf = container_of(vb, + struct vpif_cap_buffer, vb); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long flags; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + spin_lock_irqsave(&common->irqlock, flags); + if (vb->state == VB2_BUF_STATE_ACTIVE) + list_del_init(&buf->list); + spin_unlock_irqrestore(&common->irqlock, flags); + +} + +static void vpif_wait_prepare(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_unlock(&common->lock); +} + +static void vpif_wait_finish(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); +} + +static int vpif_buffer_init(struct vb2_buffer *vb) +{ + struct vpif_cap_buffer *buf = container_of(vb, + struct vpif_cap_buffer, vb); + + INIT_LIST_HEAD(&buf->list); + + return 0; +} + +static u8 channel_first_int[VPIF_NUMBER_OF_OBJECTS][2] = + { {1, 1} }; + +static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vpif_capture_config *vpif_config_data = + vpif_dev->platform_data; + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpif = &ch->vpifparams; + unsigned long addr = 0; + int ret; + + /* If buffer queue is empty, return error */ + if (list_empty(&common->dma_queue)) { + vpif_dbg(1, debug, "buffer queue is empty\n"); + return -EIO; + } + + /* Get the next frame from the buffer queue */ + common->cur_frm = common->next_frm = list_entry(common->dma_queue.next, + struct vpif_cap_buffer, list); + /* Remove buffer from the buffer queue */ + list_del(&common->cur_frm->list); + /* Mark state of the current frame to active */ + common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE; + /* Initialize field_id and started member */ + ch->field_id = 0; + common->started = 1; + addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0); + + /* Calculate the offset for Y and C data in the buffer */ + vpif_calculate_offsets(ch); + + if ((vpif->std_info.frm_fmt && + ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) && + (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) || + (!vpif->std_info.frm_fmt && + (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { + vpif_dbg(1, debug, "conflict in field format and std format\n"); + return -EINVAL; + } + + /* configure 1 or 2 channel mode */ + ret = vpif_config_data->setup_input_channel_mode + (vpif->std_info.ycmux_mode); + + if (ret < 0) { + vpif_dbg(1, debug, "can't set vpif channel mode\n"); + return ret; + } + + /* Call vpif_set_params function to set the parameters and addresses */ + ret = vpif_set_video_params(vpif, ch->channel_id); + + if (ret < 0) { + vpif_dbg(1, debug, "can't set video params\n"); + return ret; + } + + common->started = ret; + vpif_config_addr(ch, ret); + + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); + + /** + * Set interrupt for both the fields in VPIF Register enable channel in + * VPIF register + */ + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id)) { + channel0_intr_assert(); + channel0_intr_enable(1); + enable_channel0(1); + } + if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) || + (common->started == 2)) { + channel1_intr_assert(); + channel1_intr_enable(1); + enable_channel1(1); + } + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; + + return 0; +} + +/* abort streaming and wait for last buffer */ +static int vpif_stop_streaming(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + if (!vb2_is_streaming(vq)) + return 0; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + /* release all active buffers */ + while (!list_empty(&common->dma_queue)) { + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_cap_buffer, list); + list_del(&common->next_frm->list); + vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR); + } + + return 0; +} + +static struct vb2_ops video_qops = { + .queue_setup = vpif_buffer_queue_setup, + .wait_prepare = vpif_wait_prepare, + .wait_finish = vpif_wait_finish, + .buf_init = vpif_buffer_init, + .buf_prepare = vpif_buffer_prepare, + .start_streaming = vpif_start_streaming, + .stop_streaming = vpif_stop_streaming, + .buf_cleanup = vpif_buf_cleanup, + .buf_queue = vpif_buffer_queue, +}; + +/** + * vpif_process_buffer_complete: process a completed buffer + * @common: ptr to common channel object + * + * This function time stamp the buffer and mark it as DONE. It also + * wake up any process waiting on the QUEUE and set the next buffer + * as current + */ +static void vpif_process_buffer_complete(struct common_obj *common) +{ + do_gettimeofday(&common->cur_frm->vb.v4l2_buf.timestamp); + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_DONE); + /* Make curFrm pointing to nextFrm */ + common->cur_frm = common->next_frm; +} + +/** + * vpif_schedule_next_buffer: set next buffer address for capture + * @common : ptr to common channel object + * + * This function will get next buffer from the dma queue and + * set the buffer address in the vpif register for capture. + * the buffer is marked active + */ +static void vpif_schedule_next_buffer(struct common_obj *common) +{ + unsigned long addr = 0; + + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_cap_buffer, list); + /* Remove that buffer from the buffer queue */ + list_del(&common->next_frm->list); + common->next_frm->vb.state = VB2_BUF_STATE_ACTIVE; + addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0); + + /* Set top and bottom field addresses in VPIF registers */ + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); +} + +/** + * vpif_channel_isr : ISR handler for vpif capture + * @irq: irq number + * @dev_id: dev_id ptr + * + * It changes status of the captured buffer, takes next buffer from the queue + * and sets its address in VPIF registers + */ +static irqreturn_t vpif_channel_isr(int irq, void *dev_id) +{ + struct vpif_device *dev = &vpif_obj; + struct common_obj *common; + struct channel_obj *ch; + enum v4l2_field field; + int channel_id = 0; + int fid = -1, i; + + channel_id = *(int *)(dev_id); + if (!vpif_intr_status(channel_id)) + return IRQ_NONE; + + ch = dev->dev[channel_id]; + + field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field; + + for (i = 0; i < VPIF_NUMBER_OF_OBJECTS; i++) { + common = &ch->common[i]; + /* skip If streaming is not started in this channel */ + if (0 == common->started) + continue; + + /* Check the field format */ + if (1 == ch->vpifparams.std_info.frm_fmt) { + /* Progressive mode */ + if (list_empty(&common->dma_queue)) + continue; + + if (!channel_first_int[i][channel_id]) + vpif_process_buffer_complete(common); + + channel_first_int[i][channel_id] = 0; + + vpif_schedule_next_buffer(common); + + + channel_first_int[i][channel_id] = 0; + } else { + /** + * Interlaced mode. If it is first interrupt, ignore + * it + */ + if (channel_first_int[i][channel_id]) { + channel_first_int[i][channel_id] = 0; + continue; + } + if (0 == i) { + ch->field_id ^= 1; + /* Get field id from VPIF registers */ + fid = vpif_channel_getfid(ch->channel_id); + if (fid != ch->field_id) { + /** + * If field id does not match stored + * field id, make them in sync + */ + if (0 == fid) + ch->field_id = fid; + return IRQ_HANDLED; + } + } + /* device field id and local field id are in sync */ + if (0 == fid) { + /* this is even field */ + if (common->cur_frm == common->next_frm) + continue; + + /* mark the current buffer as done */ + vpif_process_buffer_complete(common); + } else if (1 == fid) { + /* odd field */ + if (list_empty(&common->dma_queue) || + (common->cur_frm != common->next_frm)) + continue; + + vpif_schedule_next_buffer(common); + } + } + } + return IRQ_HANDLED; +} + +/** + * vpif_update_std_info() - update standard related info + * @ch: ptr to channel object + * + * For a given standard selected by application, update values + * in the device data structures + */ +static int vpif_update_std_info(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpifparams = &ch->vpifparams; + const struct vpif_channel_config_params *config; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + int index; + + vpif_dbg(2, debug, "vpif_update_std_info\n"); + + for (index = 0; index < vpif_ch_params_count; index++) { + config = &ch_params[index]; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } else { + vpif_dbg(2, debug, "HD format\n"); + if (config->dv_preset == vid_ch->dv_preset) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } + } + + /* standard not found */ + if (index == vpif_ch_params_count) + return -EINVAL; + + common->fmt.fmt.pix.width = std_info->width; + common->width = std_info->width; + common->fmt.fmt.pix.height = std_info->height; + common->height = std_info->height; + common->fmt.fmt.pix.bytesperline = std_info->width; + vpifparams->video_params.hpitch = std_info->width; + vpifparams->video_params.storage_mode = std_info->frm_fmt; + + return 0; +} + +/** + * vpif_calculate_offsets : This function calculates buffers offsets + * @ch : ptr to channel object + * + * This function calculates buffer offsets for Y and C in the top and + * bottom field + */ +static void vpif_calculate_offsets(struct channel_obj *ch) +{ + unsigned int hpitch, vpitch, sizeimage; + struct video_obj *vid_ch = &(ch->video); + struct vpif_params *vpifparams = &ch->vpifparams; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + enum v4l2_field field = common->fmt.fmt.pix.field; + + vpif_dbg(2, debug, "vpif_calculate_offsets\n"); + + if (V4L2_FIELD_ANY == field) { + if (vpifparams->std_info.frm_fmt) + vid_ch->buf_field = V4L2_FIELD_NONE; + else + vid_ch->buf_field = V4L2_FIELD_INTERLACED; + } else + vid_ch->buf_field = common->fmt.fmt.pix.field; + + sizeimage = common->fmt.fmt.pix.sizeimage; + + hpitch = common->fmt.fmt.pix.bytesperline; + vpitch = sizeimage / (hpitch * 2); + + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + /* Calculate offsets for Y top, Y Bottom, C top and C Bottom */ + common->ytop_off = 0; + common->ybtm_off = hpitch; + common->ctop_off = sizeimage / 2; + common->cbtm_off = sizeimage / 2 + hpitch; + } else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) { + /* Calculate offsets for Y top, Y Bottom, C top and C Bottom */ + common->ytop_off = 0; + common->ybtm_off = sizeimage / 4; + common->ctop_off = sizeimage / 2; + common->cbtm_off = common->ctop_off + sizeimage / 4; + } else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) { + /* Calculate offsets for Y top, Y Bottom, C top and C Bottom */ + common->ybtm_off = 0; + common->ytop_off = sizeimage / 4; + common->cbtm_off = sizeimage / 2; + common->ctop_off = common->cbtm_off + sizeimage / 4; + } + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) + vpifparams->video_params.storage_mode = 1; + else + vpifparams->video_params.storage_mode = 0; + + if (1 == vpifparams->std_info.frm_fmt) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + else { + if ((field == V4L2_FIELD_ANY) + || (field == V4L2_FIELD_INTERLACED)) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline * 2; + else + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } + + ch->vpifparams.video_params.stdid = vpifparams->std_info.stdid; +} + +/** + * vpif_config_format: configure default frame format in the device + * ch : ptr to channel object + */ +static void vpif_config_format(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_config_format\n"); + + common->fmt.fmt.pix.field = V4L2_FIELD_ANY; + if (config_params.numbuffers[ch->channel_id] == 0) + common->memory = V4L2_MEMORY_USERPTR; + else + common->memory = V4L2_MEMORY_MMAP; + + common->fmt.fmt.pix.sizeimage + = config_params.channel_bufsize[ch->channel_id]; + + if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER) + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8; + else + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P; + common->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; +} + +/** + * vpif_get_default_field() - Get default field type based on interface + * @vpif_params - ptr to vpif params + */ +static inline enum v4l2_field vpif_get_default_field( + struct vpif_interface *iface) +{ + return (iface->if_type == VPIF_IF_RAW_BAYER) ? V4L2_FIELD_NONE : + V4L2_FIELD_INTERLACED; +} + +/** + * vpif_check_format() - check given pixel format for compatibility + * @ch - channel ptr + * @pixfmt - Given pixel format + * @update - update the values as per hardware requirement + * + * Check the application pixel format for S_FMT and update the input + * values as per hardware limits for TRY_FMT. The default pixel and + * field format is selected based on interface type. + */ +static int vpif_check_format(struct channel_obj *ch, + struct v4l2_pix_format *pixfmt, + int update) +{ + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + struct vpif_params *vpif_params = &ch->vpifparams; + enum v4l2_field field = pixfmt->field; + u32 sizeimage, hpitch, vpitch; + int ret = -EINVAL; + + vpif_dbg(2, debug, "vpif_check_format\n"); + /** + * first check for the pixel format. If if_type is Raw bayer, + * only V4L2_PIX_FMT_SBGGR8 format is supported. Otherwise only + * V4L2_PIX_FMT_YUV422P is supported + */ + if (vpif_params->iface.if_type == VPIF_IF_RAW_BAYER) { + if (pixfmt->pixelformat != V4L2_PIX_FMT_SBGGR8) { + if (!update) { + vpif_dbg(2, debug, "invalid pix format\n"); + goto exit; + } + pixfmt->pixelformat = V4L2_PIX_FMT_SBGGR8; + } + } else { + if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) { + if (!update) { + vpif_dbg(2, debug, "invalid pixel format\n"); + goto exit; + } + pixfmt->pixelformat = V4L2_PIX_FMT_YUV422P; + } + } + + if (!(VPIF_VALID_FIELD(field))) { + if (!update) { + vpif_dbg(2, debug, "invalid field format\n"); + goto exit; + } + /** + * By default use FIELD_NONE for RAW Bayer capture + * and FIELD_INTERLACED for other interfaces + */ + field = vpif_get_default_field(&vpif_params->iface); + } else if (field == V4L2_FIELD_ANY) + /* unsupported field. Use default */ + field = vpif_get_default_field(&vpif_params->iface); + + /* validate the hpitch */ + hpitch = pixfmt->bytesperline; + if (hpitch < vpif_params->std_info.width) { + if (!update) { + vpif_dbg(2, debug, "invalid hpitch\n"); + goto exit; + } + hpitch = vpif_params->std_info.width; + } + + sizeimage = pixfmt->sizeimage; + + vpitch = sizeimage / (hpitch * 2); + + /* validate the vpitch */ + if (vpitch < vpif_params->std_info.height) { + if (!update) { + vpif_dbg(2, debug, "Invalid vpitch\n"); + goto exit; + } + vpitch = vpif_params->std_info.height; + } + + /* Check for 8 byte alignment */ + if (!ALIGN(hpitch, 8)) { + if (!update) { + vpif_dbg(2, debug, "invalid pitch alignment\n"); + goto exit; + } + /* adjust to next 8 byte boundary */ + hpitch = (((hpitch + 7) / 8) * 8); + } + /* if update is set, modify the bytesperline and sizeimage */ + if (update) { + pixfmt->bytesperline = hpitch; + pixfmt->sizeimage = hpitch * vpitch * 2; + } + /** + * Image width and height is always based on current standard width and + * height + */ + pixfmt->width = common->fmt.fmt.pix.width; + pixfmt->height = common->fmt.fmt.pix.height; + return 0; +exit: + return ret; +} + +/** + * vpif_config_addr() - function to configure buffer address in vpif + * @ch - channel ptr + * @muxmode - channel mux mode + */ +static void vpif_config_addr(struct channel_obj *ch, int muxmode) +{ + struct common_obj *common; + + vpif_dbg(2, debug, "vpif_config_addr\n"); + + common = &(ch->common[VPIF_VIDEO_INDEX]); + + if (VPIF_CHANNEL1_VIDEO == ch->channel_id) + common->set_addr = ch1_set_videobuf_addr; + else if (2 == muxmode) + common->set_addr = ch0_set_videobuf_addr_yc_nmux; + else + common->set_addr = ch0_set_videobuf_addr; +} + +/** + * vpif_mmap : It is used to map kernel space buffers into user spaces + * @filep: file pointer + * @vma: ptr to vm_area_struct + */ +static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) +{ + /* Get the channel object and file handle object */ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + int ret; + + vpif_dbg(2, debug, "vpif_mmap\n"); + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + ret = vb2_mmap(&common->buffer_queue, vma); + mutex_unlock(&common->lock); + return ret; +} + +/** + * vpif_poll: It is used for select/poll system call + * @filep: file pointer + * @wait: poll table to wait + */ +static unsigned int vpif_poll(struct file *filep, poll_table * wait) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *channel = fh->channel; + struct common_obj *common = &(channel->common[VPIF_VIDEO_INDEX]); + unsigned int res = 0; + + vpif_dbg(2, debug, "vpif_poll\n"); + + if (common->started) { + mutex_lock(&common->lock); + res = vb2_poll(&common->buffer_queue, filep, wait); + mutex_unlock(&common->lock); + } + return res; +} + +/** + * vpif_open : vpif open handler + * @filep: file ptr + * + * It creates object of file handle structure and stores it in private_data + * member of filepointer + */ +static int vpif_open(struct file *filep) +{ + struct vpif_capture_config *config = vpif_dev->platform_data; + struct video_device *vdev = video_devdata(filep); + struct common_obj *common; + struct video_obj *vid_ch; + struct channel_obj *ch; + struct vpif_fh *fh; + int i; + + vpif_dbg(2, debug, "vpif_open\n"); + + ch = video_get_drvdata(vdev); + + vid_ch = &ch->video; + common = &ch->common[VPIF_VIDEO_INDEX]; + + if (NULL == ch->curr_subdev_info) { + /** + * search through the sub device to see a registered + * sub device and make it as current sub device + */ + for (i = 0; i < config->subdev_count; i++) { + if (vpif_obj.sd[i]) { + /* the sub device is registered */ + ch->curr_subdev_info = &config->subdev_info[i]; + /* make first input as the current input */ + vid_ch->input_idx = 0; + break; + } + } + if (i == config->subdev_count) { + vpif_err("No sub device registered\n"); + return -ENOENT; + } + } + + /* Allocate memory for the file handle object */ + fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL); + if (NULL == fh) { + vpif_err("unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + if (mutex_lock_interruptible(&common->lock)) { + kfree(fh); + return -ERESTARTSYS; + } + /* store pointer to fh in private_data member of filep */ + filep->private_data = fh; + fh->channel = ch; + fh->initialized = 0; + /* If decoder is not initialized. initialize it */ + if (!ch->initialized) { + fh->initialized = 1; + ch->initialized = 1; + memset(&(ch->vpifparams), 0, sizeof(struct vpif_params)); + } + /* Increment channel usrs counter */ + ch->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed[VPIF_VIDEO_INDEX] = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&ch->prio, &fh->prio); + mutex_unlock(&common->lock); + return 0; +} + +/** + * vpif_release : function to clean up file close + * @filep: file pointer + * + * This function deletes buffer queue, frees the buffers and the vpif file + * handle + */ +static int vpif_release(struct file *filep) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + vpif_dbg(2, debug, "vpif_release\n"); + + common = &ch->common[VPIF_VIDEO_INDEX]; + + mutex_lock(&common->lock); + /* if this instance is doing IO */ + if (fh->io_allowed[VPIF_VIDEO_INDEX]) { + /* Reset io_usrs member of channel object */ + common->io_usrs = 0; + /* Disable channel as per its device type and channel id */ + if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { + enable_channel0(0); + channel0_intr_enable(0); + } + if ((VPIF_CHANNEL1_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel1(0); + channel1_intr_enable(0); + } + common->started = 0; + /* Free buffers allocated */ + vb2_queue_release(&common->buffer_queue); + vb2_dma_contig_cleanup_ctx(common->alloc_ctx); + } + + /* Decrement channel usrs counter */ + ch->usrs--; + + /* Close the priority */ + v4l2_prio_close(&ch->prio, fh->prio); + + if (fh->initialized) + ch->initialized = 0; + + mutex_unlock(&common->lock); + filep->private_data = NULL; + kfree(fh); + return 0; +} + +/** + * vpif_reqbufs() - request buffer handler + * @file: file ptr + * @priv: file handle + * @reqbuf: request buffer structure ptr + */ +static int vpif_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + u8 index = 0; + struct vb2_queue *q; + + vpif_dbg(2, debug, "vpif_reqbufs\n"); + + /** + * This file handle has not initialized the channel, + * It is not allowed to do settings + */ + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) + || (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != reqbuf->type || !vpif_dev) + return -EINVAL; + + index = VPIF_VIDEO_INDEX; + + common = &ch->common[index]; + + if (0 != common->io_usrs) + return -EBUSY; + + /* Initialize videobuf2 queue as per the buffer type */ + common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev); + if (!common->alloc_ctx) { + vpif_err("Failed to get the context\n"); + return -EINVAL; + } + q = &common->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = fh; + q->ops = &video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct vpif_cap_buffer); + + vb2_queue_init(q); + + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed[index] = 1; + /* Increment io usrs member of channel object to 1 */ + common->io_usrs = 1; + /* Store type of memory requested in channel object */ + common->memory = reqbuf->memory; + INIT_LIST_HEAD(&common->dma_queue); + + /* Allocate buffers */ + return vb2_reqbufs(&common->buffer_queue, reqbuf); +} + +/** + * vpif_querybuf() - query buffer handler + * @file: file ptr + * @priv: file handle + * @buf: v4l2 buffer structure ptr + */ +static int vpif_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_querybuf\n"); + + if (common->fmt.type != buf->type) + return -EINVAL; + + if (common->memory != V4L2_MEMORY_MMAP) { + vpif_dbg(1, debug, "Invalid memory\n"); + return -EINVAL; + } + + return vb2_querybuf(&common->buffer_queue, buf); +} + +/** + * vpif_qbuf() - query buffer handler + * @file: file ptr + * @priv: file handle + * @buf: v4l2 buffer structure ptr + */ +static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_buffer tbuf = *buf; + + vpif_dbg(2, debug, "vpif_qbuf\n"); + + if (common->fmt.type != tbuf.type) { + vpif_err("invalid buffer type\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh io not allowed\n"); + return -EACCES; + } + + return vb2_qbuf(&common->buffer_queue, buf); +} + +/** + * vpif_dqbuf() - query buffer handler + * @file: file ptr + * @priv: file handle + * @buf: v4l2 buffer structure ptr + */ +static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + vpif_dbg(2, debug, "vpif_dqbuf\n"); + + return vb2_dqbuf(&common->buffer_queue, buf, + (file->f_flags & O_NONBLOCK)); +} + +/** + * vpif_streamon() - streamon handler + * @file: file ptr + * @priv: file handle + * @buftype: v4l2 buffer type + */ +static int vpif_streamon(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id]; + struct vpif_params *vpif; + int ret = 0; + + vpif_dbg(2, debug, "vpif_streamon\n"); + + vpif = &ch->vpifparams; + + if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + vpif_dbg(1, debug, "buffer type not supported\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_dbg(1, debug, "io not allowed\n"); + return -EACCES; + } + + /* If Streaming is already started, return error */ + if (common->started) { + vpif_dbg(1, debug, "channel->started\n"); + return -EBUSY; + } + + if ((ch->channel_id == VPIF_CHANNEL0_VIDEO && + oth_ch->common[VPIF_VIDEO_INDEX].started && + vpif->std_info.ycmux_mode == 0) || + ((ch->channel_id == VPIF_CHANNEL1_VIDEO) && + (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) { + vpif_dbg(1, debug, "other channel is being used\n"); + return -EBUSY; + } + + ret = vpif_check_format(ch, &common->fmt.fmt.pix, 0); + if (ret) + return ret; + + /* Enable streamon on the sub device */ + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video, + s_stream, 1); + + if (ret && (ret != -ENOIOCTLCMD)) { + vpif_dbg(1, debug, "stream on failed in subdev\n"); + return ret; + } + + /* Call vb2_streamon to start streaming in videobuf2 */ + ret = vb2_streamon(&common->buffer_queue, buftype); + if (ret) { + vpif_dbg(1, debug, "vb2_streamon\n"); + return ret; + } + + return ret; +} + +/** + * vpif_streamoff() - streamoff handler + * @file: file ptr + * @priv: file handle + * @buftype: v4l2 buffer type + */ +static int vpif_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret; + + vpif_dbg(2, debug, "vpif_streamoff\n"); + + if (buftype != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + vpif_dbg(1, debug, "buffer type not supported\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_dbg(1, debug, "io not allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!common->started) { + vpif_dbg(1, debug, "channel->started\n"); + return -EINVAL; + } + + /* disable channel */ + if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { + enable_channel0(0); + channel0_intr_enable(0); + } else { + enable_channel1(0); + channel1_intr_enable(0); + } + + common->started = 0; + + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video, + s_stream, 0); + + if (ret && (ret != -ENOIOCTLCMD)) + vpif_dbg(1, debug, "stream off failed in subdev\n"); + + return vb2_streamoff(&common->buffer_queue, buftype); +} + +/** + * vpif_map_sub_device_to_input() - Maps sub device to input + * @ch - ptr to channel + * @config - ptr to capture configuration + * @input_index - Given input index from application + * @sub_device_index - index into sd table + * + * lookup the sub device information for a given input index. + * we report all the inputs to application. inputs table also + * has sub device name for the each input + */ +static struct vpif_subdev_info *vpif_map_sub_device_to_input( + struct channel_obj *ch, + struct vpif_capture_config *vpif_cfg, + int input_index, + int *sub_device_index) +{ + struct vpif_capture_chan_config *chan_cfg; + struct vpif_subdev_info *subdev_info = NULL; + const char *subdev_name = NULL; + int i; + + vpif_dbg(2, debug, "vpif_map_sub_device_to_input\n"); + + chan_cfg = &vpif_cfg->chan_config[ch->channel_id]; + + /** + * search through the inputs to find the sub device supporting + * the input + */ + for (i = 0; i < chan_cfg->input_count; i++) { + /* For each sub device, loop through input */ + if (i == input_index) { + subdev_name = chan_cfg->inputs[i].subdev_name; + break; + } + } + + /* if reached maximum. return null */ + if (i == chan_cfg->input_count || (NULL == subdev_name)) + return subdev_info; + + /* loop through the sub device list to get the sub device info */ + for (i = 0; i < vpif_cfg->subdev_count; i++) { + subdev_info = &vpif_cfg->subdev_info[i]; + if (!strcmp(subdev_info->name, subdev_name)) + break; + } + + if (i == vpif_cfg->subdev_count) + return subdev_info; + + /* check if the sub device is registered */ + if (NULL == vpif_obj.sd[i]) + return NULL; + + *sub_device_index = i; + return subdev_info; +} + +/** + * vpif_querystd() - querystd handler + * @file: file ptr + * @priv: file handle + * @std_id: ptr to std id + * + * This function is called to detect standard at the selected input + */ +static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + int ret = 0; + + vpif_dbg(2, debug, "vpif_querystd\n"); + + /* Call querystd function of decoder device */ + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video, + querystd, std_id); + if (ret < 0) + vpif_dbg(1, debug, "Failed to set standard for sub devices\n"); + + return ret; +} + +/** + * vpif_g_std() - get STD handler + * @file: file ptr + * @priv: file handle + * @std_id: ptr to std id + */ +static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + vpif_dbg(2, debug, "vpif_g_std\n"); + + *std = ch->video.stdid; + return 0; +} + +/** + * vpif_s_std() - set STD handler + * @file: file ptr + * @priv: file handle + * @std_id: ptr to std id + */ +static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + vpif_dbg(2, debug, "vpif_s_std\n"); + + if (common->started) { + vpif_err("streaming in progress\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + ch->video.stdid = *std_id; + ch->video.dv_preset = V4L2_DV_INVALID; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); + + /* Get the information about the standard */ + if (vpif_update_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + /* Configure the default format information */ + vpif_config_format(ch); + + /* set standard in the sub device */ + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core, + s_std, *std_id); + if (ret < 0) + vpif_dbg(1, debug, "Failed to set standard for sub devices\n"); + return ret; +} + +/** + * vpif_enum_input() - ENUMINPUT handler + * @file: file ptr + * @priv: file handle + * @input: ptr to input structure + */ +static int vpif_enum_input(struct file *file, void *priv, + struct v4l2_input *input) +{ + + struct vpif_capture_config *config = vpif_dev->platform_data; + struct vpif_capture_chan_config *chan_cfg; + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + chan_cfg = &config->chan_config[ch->channel_id]; + + if (input->index >= chan_cfg->input_count) { + vpif_dbg(1, debug, "Invalid input index\n"); + return -EINVAL; + } + + memcpy(input, &chan_cfg->inputs[input->index].input, + sizeof(*input)); + return 0; +} + +/** + * vpif_g_input() - Get INPUT handler + * @file: file ptr + * @priv: file handle + * @index: ptr to input index + */ +static int vpif_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + *index = vid_ch->input_idx; + + return 0; +} + +/** + * vpif_s_input() - Set INPUT handler + * @file: file ptr + * @priv: file handle + * @index: input index + */ +static int vpif_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpif_capture_config *config = vpif_dev->platform_data; + struct vpif_capture_chan_config *chan_cfg; + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + struct vpif_subdev_info *subdev_info; + int ret = 0, sd_index = 0; + u32 input = 0, output = 0; + + chan_cfg = &config->chan_config[ch->channel_id]; + + if (common->started) { + vpif_err("Streaming in progress\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + + fh->initialized = 1; + subdev_info = vpif_map_sub_device_to_input(ch, config, index, + &sd_index); + if (NULL == subdev_info) { + vpif_dbg(1, debug, + "couldn't lookup sub device for the input index\n"); + return -EINVAL; + } + + /* first setup input path from sub device to vpif */ + if (config->setup_input_path) { + ret = config->setup_input_path(ch->channel_id, + subdev_info->name); + if (ret < 0) { + vpif_dbg(1, debug, "couldn't setup input path for the" + " sub device %s, for input index %d\n", + subdev_info->name, index); + return ret; + } + } + + if (subdev_info->can_route) { + input = subdev_info->input; + output = subdev_info->output; + ret = v4l2_subdev_call(vpif_obj.sd[sd_index], video, s_routing, + input, output, 0); + if (ret < 0) { + vpif_dbg(1, debug, "Failed to set input\n"); + return ret; + } + } + vid_ch->input_idx = index; + ch->curr_subdev_info = subdev_info; + ch->curr_sd_index = sd_index; + /* copy interface parameters to vpif */ + ch->vpifparams.iface = subdev_info->vpif_if; + + /* update tvnorms from the sub device input info */ + ch->video_dev->tvnorms = chan_cfg->inputs[index].input.std; + return ret; +} + +/** + * vpif_enum_fmt_vid_cap() - ENUM_FMT handler + * @file: file ptr + * @priv: file handle + * @index: input index + */ +static int vpif_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + if (fmt->index != 0) { + vpif_dbg(1, debug, "Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER) { + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(fmt->description, "Raw Mode -Bayer Pattern GrRBGb"); + fmt->pixelformat = V4L2_PIX_FMT_SBGGR8; + } else { + fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(fmt->description, "YCbCr4:2:2 YC Planar"); + fmt->pixelformat = V4L2_PIX_FMT_YUV422P; + } + return 0; +} + +/** + * vpif_try_fmt_vid_cap() - TRY_FMT handler + * @file: file ptr + * @priv: file handle + * @fmt: ptr to v4l2 format structure + */ +static int vpif_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + return vpif_check_format(ch, pixfmt, 1); +} + + +/** + * vpif_g_fmt_vid_cap() - Set INPUT handler + * @file: file ptr + * @priv: file handle + * @fmt: ptr to v4l2 format structure + */ +static int vpif_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + /* Check the validity of the buffer type */ + if (common->fmt.type != fmt->type) + return -EINVAL; + + /* Fill in the information about format */ + *fmt = common->fmt; + return 0; +} + +/** + * vpif_s_fmt_vid_cap() - Set FMT handler + * @file: file ptr + * @priv: file handle + * @fmt: ptr to v4l2 format structure + */ +static int vpif_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_pix_format *pixfmt; + int ret = 0; + + vpif_dbg(2, debug, "%s\n", __func__); + + /* If streaming is started, return error */ + if (common->started) { + vpif_dbg(1, debug, "Streaming is started\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + + fh->initialized = 1; + + pixfmt = &fmt->fmt.pix; + /* Check for valid field format */ + ret = vpif_check_format(ch, pixfmt, 0); + + if (ret) + return ret; + /* store the format in the channel object */ + common->fmt = *fmt; + return 0; +} + +/** + * vpif_querycap() - QUERYCAP handler + * @file: file ptr + * @priv: file handle + * @cap: ptr to v4l2_capability structure + */ +static int vpif_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpif_capture_config *config = vpif_dev->platform_data; + + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, "vpif capture", sizeof(cap->driver)); + strlcpy(cap->bus_info, "VPIF Platform", sizeof(cap->bus_info)); + strlcpy(cap->card, config->card_name, sizeof(cap->card)); + + return 0; +} + +/** + * vpif_g_priority() - get priority handler + * @file: file ptr + * @priv: file handle + * @prio: ptr to v4l2_priority structure + */ +static int vpif_g_priority(struct file *file, void *priv, + enum v4l2_priority *prio) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *prio = v4l2_prio_max(&ch->prio); + + return 0; +} + +/** + * vpif_s_priority() - set priority handler + * @file: file ptr + * @priv: file handle + * @prio: ptr to v4l2_priority structure + */ +static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_prio_change(&ch->prio, &fh->prio, p); +} + +/** + * vpif_cropcap() - cropcap handler + * @file: file ptr + * @priv: file handle + * @crop: ptr to v4l2_cropcap structure + */ +static int vpif_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != crop->type) + return -EINVAL; + + crop->bounds.left = 0; + crop->bounds.top = 0; + crop->bounds.height = common->height; + crop->bounds.width = common->width; + crop->defrect = crop->bounds; + return 0; +} + +/** + * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, enum_dv_presets, preset); +} + +/** + * vpif_query_dv_presets() - QUERY_DV_PRESET handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_query_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, query_dv_preset, preset); +} +/** + * vpif_s_dv_presets() - S_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (common->started) { + vpif_dbg(1, debug, "streaming in progress\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (ret) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + ch->video.dv_preset = preset->preset; + ch->video.stdid = V4L2_STD_UNKNOWN; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); + + /* Get the information about the standard */ + if (vpif_update_std_info(ch)) { + vpif_dbg(1, debug, "Error getting the standard info\n"); + ret = -EINVAL; + } else { + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, s_dv_preset, preset); + } + + mutex_unlock(&common->lock); + + return ret; +} +/** + * vpif_g_dv_presets() - G_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + preset->preset = ch->video.dv_preset; + + return 0; +} + +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD) { + vpif_dbg(2, debug, "Custom DV timings not supported by " + "subdevice\n"); + return -EINVAL; + } + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + *bt = timings->bt; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + std_info->dv_preset = V4L2_DV_INVALID; + + vid_ch->stdid = 0; + vid_ch->dv_preset = V4L2_DV_INVALID; + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + + timings->bt = *bt; + + return 0; +} + +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core, + g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core, + s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + +/* vpif capture ioctl operations */ +static const struct v4l2_ioctl_ops vpif_ioctl_ops = { + .vidioc_querycap = vpif_querycap, + .vidioc_g_priority = vpif_g_priority, + .vidioc_s_priority = vpif_s_priority, + .vidioc_enum_fmt_vid_cap = vpif_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vpif_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vpif_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vpif_try_fmt_vid_cap, + .vidioc_enum_input = vpif_enum_input, + .vidioc_s_input = vpif_s_input, + .vidioc_g_input = vpif_g_input, + .vidioc_reqbufs = vpif_reqbufs, + .vidioc_querybuf = vpif_querybuf, + .vidioc_querystd = vpif_querystd, + .vidioc_s_std = vpif_s_std, + .vidioc_g_std = vpif_g_std, + .vidioc_qbuf = vpif_qbuf, + .vidioc_dqbuf = vpif_dqbuf, + .vidioc_streamon = vpif_streamon, + .vidioc_streamoff = vpif_streamoff, + .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_presets = vpif_enum_dv_presets, + .vidioc_s_dv_preset = vpif_s_dv_preset, + .vidioc_g_dv_preset = vpif_g_dv_preset, + .vidioc_query_dv_preset = vpif_query_dv_preset, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, +}; + +/* vpif file operations */ +static struct v4l2_file_operations vpif_fops = { + .owner = THIS_MODULE, + .open = vpif_open, + .release = vpif_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpif_mmap, + .poll = vpif_poll +}; + +/* vpif video template */ +static struct video_device vpif_video_template = { + .name = "vpif", + .fops = &vpif_fops, + .minor = -1, + .ioctl_ops = &vpif_ioctl_ops, +}; + +/** + * initialize_vpif() - Initialize vpif data structures + * + * Allocate memory for data structures and initialize them + */ +static int initialize_vpif(void) +{ + int err = 0, i, j; + int free_channel_objects_index; + + /* Default number of buffers should be 3 */ + if ((ch0_numbuffers > 0) && + (ch0_numbuffers < config_params.min_numbuffers)) + ch0_numbuffers = config_params.min_numbuffers; + if ((ch1_numbuffers > 0) && + (ch1_numbuffers < config_params.min_numbuffers)) + ch1_numbuffers = config_params.min_numbuffers; + + /* Set buffer size to min buffers size if it is invalid */ + if (ch0_bufsize < config_params.min_bufsize[VPIF_CHANNEL0_VIDEO]) + ch0_bufsize = + config_params.min_bufsize[VPIF_CHANNEL0_VIDEO]; + if (ch1_bufsize < config_params.min_bufsize[VPIF_CHANNEL1_VIDEO]) + ch1_bufsize = + config_params.min_bufsize[VPIF_CHANNEL1_VIDEO]; + + config_params.numbuffers[VPIF_CHANNEL0_VIDEO] = ch0_numbuffers; + config_params.numbuffers[VPIF_CHANNEL1_VIDEO] = ch1_numbuffers; + if (ch0_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL0_VIDEO] + = ch0_bufsize; + } + if (ch1_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL1_VIDEO] + = ch1_bufsize; + } + + /* Allocate memory for six channel objects */ + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + vpif_obj.dev[i] = + kzalloc(sizeof(*vpif_obj.dev[i]), GFP_KERNEL); + /* If memory allocation fails, return error */ + if (!vpif_obj.dev[i]) { + free_channel_objects_index = i; + err = -ENOMEM; + goto vpif_init_free_channel_objects; + } + } + return 0; + +vpif_init_free_channel_objects: + for (j = 0; j < free_channel_objects_index; j++) + kfree(vpif_obj.dev[j]); + return err; +} + +/** + * vpif_probe : This function probes the vpif capture driver + * @pdev: platform device pointer + * + * This creates device entries by register itself to the V4L2 driver and + * initializes fields of each channel objects + */ +static __init int vpif_probe(struct platform_device *pdev) +{ + struct vpif_subdev_info *subdevdata; + struct vpif_capture_config *config; + int i, j, k, m, q, err; + struct i2c_adapter *i2c_adap; + struct channel_obj *ch; + struct common_obj *common; + struct video_device *vfd; + struct resource *res; + int subdev_count; + size_t size; + + vpif_dev = &pdev->dev; + + err = initialize_vpif(); + if (err) { + v4l2_err(vpif_dev->driver, "Error initializing vpif\n"); + return err; + } + + err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev); + if (err) { + v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n"); + return err; + } + + k = 0; + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, vpif_channel_isr, IRQF_SHARED, + "VPIF_Capture", + (void *)(&vpif_obj.dev[k]->channel_id))) { + err = -EBUSY; + i--; + goto vpif_int_err; + } + } + k++; + } + + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (NULL == vfd) { + for (j = 0; j < i; j++) { + ch = vpif_obj.dev[j]; + video_device_release(ch->video_dev); + } + err = -ENOMEM; + goto vpif_dev_alloc_err; + } + + /* Initialize field of video device */ + *vfd = vpif_video_template; + vfd->v4l2_dev = &vpif_obj.v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), + "VPIF_Capture_DRIVER_V%s", + VPIF_CAPTURE_VERSION); + /* Set video_dev to the video device */ + ch->video_dev = vfd; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) { + size = resource_size(res); + /* The resources are divided into two equal memory and when we + * have HD output we can add them together + */ + for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + ch->channel_id = j; + /* only enabled if second resource exists */ + config_params.video_limit[ch->channel_id] = 0; + if (size) + config_params.video_limit[ch->channel_id] = + size/2; + } + } + + for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + ch->channel_id = j; + common = &(ch->common[VPIF_VIDEO_INDEX]); + spin_lock_init(&common->irqlock); + mutex_init(&common->lock); + ch->video_dev->lock = &common->lock; + /* Initialize prio member of channel object */ + v4l2_prio_init(&ch->prio); + err = video_register_device(ch->video_dev, + VFL_TYPE_GRABBER, (j ? 1 : 0)); + if (err) + goto probe_out; + + video_set_drvdata(ch->video_dev, ch); + + } + + i2c_adap = i2c_get_adapter(1); + config = pdev->dev.platform_data; + + subdev_count = config->subdev_count; + vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, + GFP_KERNEL); + if (vpif_obj.sd == NULL) { + vpif_err("unable to allocate memory for subdevice pointers\n"); + err = -ENOMEM; + goto probe_out; + } + + for (i = 0; i < subdev_count; i++) { + subdevdata = &config->subdev_info[i]; + vpif_obj.sd[i] = + v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, + i2c_adap, + &subdevdata->board_info, + NULL); + + if (!vpif_obj.sd[i]) { + vpif_err("Error registering v4l2 subdevice\n"); + goto probe_subdev_out; + } + v4l2_info(&vpif_obj.v4l2_dev, "registered sub device %s\n", + subdevdata->name); + + if (vpif_obj.sd[i]) + vpif_obj.sd[i]->grp_id = 1 << i; + } + + v4l2_info(&vpif_obj.v4l2_dev, "VPIF capture driver initialized\n"); + return 0; + +probe_subdev_out: + /* free sub devices memory */ + kfree(vpif_obj.sd); + + j = VPIF_CAPTURE_MAX_DEVICES; +probe_out: + for (k = 0; k < j; k++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[k]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + } + +vpif_dev_alloc_err: + k = VPIF_CAPTURE_MAX_DEVICES-1; + res = platform_get_resource(pdev, IORESOURCE_IRQ, k); + i = res->end; + +vpif_int_err: + for (q = k; q >= 0; q--) { + for (m = i; m >= (int)res->start; m--) + free_irq(m, (void *)(&vpif_obj.dev[q]->channel_id)); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, q-1); + if (res) + i = res->end; + } + v4l2_device_unregister(&vpif_obj.v4l2_dev); + return err; +} + +/** + * vpif_remove() - driver remove handler + * @device: ptr to platform device structure + * + * The vidoe device is unregistered + */ +static int vpif_remove(struct platform_device *device) +{ + int i; + struct channel_obj *ch; + + v4l2_device_unregister(&vpif_obj.v4l2_dev); + + /* un-register device */ + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + } + return 0; +} + +#ifdef CONFIG_PM +/** + * vpif_suspend: vpif device suspend + */ +static int vpif_suspend(struct device *dev) +{ + + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (ch->usrs && common->io_usrs) { + /* Disable channel */ + if (ch->channel_id == VPIF_CHANNEL0_VIDEO) { + enable_channel0(0); + channel0_intr_enable(0); + } + if (ch->channel_id == VPIF_CHANNEL1_VIDEO || + common->started == 2) { + enable_channel1(0); + channel1_intr_enable(0); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +/* + * vpif_resume: vpif device suspend + */ +static int vpif_resume(struct device *dev) +{ + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (ch->usrs && common->io_usrs) { + /* Disable channel */ + if (ch->channel_id == VPIF_CHANNEL0_VIDEO) { + enable_channel0(1); + channel0_intr_enable(1); + } + if (ch->channel_id == VPIF_CHANNEL1_VIDEO || + common->started == 2) { + enable_channel1(1); + channel1_intr_enable(1); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +static const struct dev_pm_ops vpif_dev_pm_ops = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_dev_pm_ops) +#else +#define vpif_pm_ops NULL +#endif + +static __refdata struct platform_driver vpif_driver = { + .driver = { + .name = "vpif_capture", + .owner = THIS_MODULE, + .pm = vpif_pm_ops, + }, + .probe = vpif_probe, + .remove = vpif_remove, +}; + +/** + * vpif_init: initialize the vpif driver + * + * This function registers device and driver to the kernel, requests irq + * handler and allocates memory + * for channel objects + */ +static __init int vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} + +/** + * vpif_cleanup : This function clean up the vpif capture resources + * + * This will un-registers device and driver to the kernel, frees + * requested irq handler and de-allocates memory allocated for channel + * objects. + */ +static void vpif_cleanup(void) +{ + struct platform_device *pdev; + struct resource *res; + int irq_num; + int i = 0; + + pdev = container_of(vpif_dev, struct platform_device, dev); + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, + (void *)(&vpif_obj.dev[i]->channel_id)); + i++; + } + + platform_driver_unregister(&vpif_driver); + + kfree(vpif_obj.sd); + for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) + kfree(vpif_obj.dev[i]); +} + +/* Function for module initialization and cleanup */ +module_init(vpif_init); +module_exit(vpif_cleanup); diff --git a/drivers/media/platform/davinci/vpif_capture.h b/drivers/media/platform/davinci/vpif_capture.h new file mode 100644 index 00000000000..3511510f43e --- /dev/null +++ b/drivers/media/platform/davinci/vpif_capture.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef VPIF_CAPTURE_H +#define VPIF_CAPTURE_H + +#ifdef __KERNEL__ + +/* Header files */ +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/videobuf-core.h> +#include <media/videobuf2-dma-contig.h> +#include <media/davinci/vpif_types.h> + +#include "vpif.h" + +/* Macros */ +#define VPIF_CAPTURE_VERSION "0.0.2" + +#define VPIF_VALID_FIELD(field) (((V4L2_FIELD_ANY == field) || \ + (V4L2_FIELD_NONE == field)) || \ + (((V4L2_FIELD_INTERLACED == field) || \ + (V4L2_FIELD_SEQ_TB == field)) || \ + (V4L2_FIELD_SEQ_BT == field))) + +#define VPIF_CAPTURE_MAX_DEVICES 2 +#define VPIF_VIDEO_INDEX 0 +#define VPIF_NUMBER_OF_OBJECTS 1 + +/* Enumerated data type to give id to each device per channel */ +enum vpif_channel_id { + VPIF_CHANNEL0_VIDEO = 0, + VPIF_CHANNEL1_VIDEO, +}; + +struct video_obj { + enum v4l2_field buf_field; + /* Currently selected or default standard */ + v4l2_std_id stdid; + u32 dv_preset; + struct v4l2_bt_timings bt_timings; + /* This is to track the last input that is passed to application */ + u32 input_idx; +}; + +struct vpif_cap_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct common_obj { + /* Pointer pointing to current v4l2_buffer */ + struct vpif_cap_buffer *cur_frm; + /* Pointer pointing to current v4l2_buffer */ + struct vpif_cap_buffer *next_frm; + /* + * This field keeps track of type of buffer exchange mechanism + * user has selected + */ + enum v4l2_memory memory; + /* Used to store pixel format */ + struct v4l2_format fmt; + /* Buffer queue used in video-buf */ + struct vb2_queue buffer_queue; + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + /* Queue of filled frames */ + struct list_head dma_queue; + /* Used in video-buf */ + spinlock_t irqlock; + /* lock used to access this structure */ + struct mutex lock; + /* number of users performing IO */ + u32 io_usrs; + /* Indicates whether streaming started */ + u8 started; + /* Function pointer to set the addresses */ + void (*set_addr) (unsigned long, unsigned long, unsigned long, + unsigned long); + /* offset where Y top starts from the starting of the buffer */ + u32 ytop_off; + /* offset where Y bottom starts from the starting of the buffer */ + u32 ybtm_off; + /* offset where C top starts from the starting of the buffer */ + u32 ctop_off; + /* offset where C bottom starts from the starting of the buffer */ + u32 cbtm_off; + /* Indicates width of the image data */ + u32 width; + /* Indicates height of the image data */ + u32 height; +}; + +struct channel_obj { + /* Identifies video device for this channel */ + struct video_device *video_dev; + /* Used to keep track of state of the priority */ + struct v4l2_prio_state prio; + /* number of open instances of the channel */ + int usrs; + /* Indicates id of the field which is being displayed */ + u32 field_id; + /* flag to indicate whether decoder is initialized */ + u8 initialized; + /* Identifies channel */ + enum vpif_channel_id channel_id; + /* index into sd table */ + int curr_sd_index; + /* ptr to current sub device information */ + struct vpif_subdev_info *curr_subdev_info; + /* vpif configuration params */ + struct vpif_params vpifparams; + /* common object array */ + struct common_obj common[VPIF_NUMBER_OF_OBJECTS]; + /* video object */ + struct video_obj video; +}; + +/* File handle structure */ +struct vpif_fh { + /* pointer to channel object for opened device */ + struct channel_obj *channel; + /* Indicates whether this file handle is doing IO */ + u8 io_allowed[VPIF_NUMBER_OF_OBJECTS]; + /* Used to keep track priority of this instance */ + enum v4l2_priority prio; + /* Used to indicate channel is initialize or not */ + u8 initialized; +}; + +struct vpif_device { + struct v4l2_device v4l2_dev; + struct channel_obj *dev[VPIF_CAPTURE_NUM_CHANNELS]; + struct v4l2_subdev **sd; +}; + +struct vpif_config_params { + u8 min_numbuffers; + u8 numbuffers[VPIF_CAPTURE_NUM_CHANNELS]; + s8 device_type; + u32 min_bufsize[VPIF_CAPTURE_NUM_CHANNELS]; + u32 channel_bufsize[VPIF_CAPTURE_NUM_CHANNELS]; + u8 default_device[VPIF_CAPTURE_NUM_CHANNELS]; + u32 video_limit[VPIF_CAPTURE_NUM_CHANNELS]; + u8 max_device_type; +}; +/* Struct which keeps track of the line numbers for the sliced vbi service */ +struct vpif_service_line { + u16 service_id; + u16 service_line[2]; +}; +#endif /* End of __KERNEL__ */ +#endif /* VPIF_CAPTURE_H */ diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c new file mode 100644 index 00000000000..4a24848c1a6 --- /dev/null +++ b/drivers/media/platform/davinci/vpif_display.c @@ -0,0 +1,2010 @@ +/* + * vpif-display - VPIF display driver + * Display driver for TI DaVinci VPIF + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/string.h> +#include <linux/videodev2.h> +#include <linux/wait.h> +#include <linux/time.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <asm/irq.h> +#include <asm/page.h> + +#include <media/adv7343.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-chip-ident.h> + +#include "vpif_display.h" +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci VPIF Display driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(VPIF_DISPLAY_VERSION); + +#define VPIF_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50) + +#define vpif_err(fmt, arg...) v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg) +#define vpif_dbg(level, debug, fmt, arg...) \ + v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg) + +static int debug = 1; +static u32 ch2_numbuffers = 3; +static u32 ch3_numbuffers = 3; +static u32 ch2_bufsize = 1920 * 1080 * 2; +static u32 ch3_bufsize = 720 * 576 * 2; + +module_param(debug, int, 0644); +module_param(ch2_numbuffers, uint, S_IRUGO); +module_param(ch3_numbuffers, uint, S_IRUGO); +module_param(ch2_bufsize, uint, S_IRUGO); +module_param(ch3_bufsize, uint, S_IRUGO); + +MODULE_PARM_DESC(debug, "Debug level 0-1"); +MODULE_PARM_DESC(ch2_numbuffers, "Channel2 buffer count (default:3)"); +MODULE_PARM_DESC(ch3_numbuffers, "Channel3 buffer count (default:3)"); +MODULE_PARM_DESC(ch2_bufsize, "Channel2 buffer size (default:1920 x 1080 x 2)"); +MODULE_PARM_DESC(ch3_bufsize, "Channel3 buffer size (default:720 x 576 x 2)"); + +static struct vpif_config_params config_params = { + .min_numbuffers = 3, + .numbuffers[0] = 3, + .numbuffers[1] = 3, + .min_bufsize[0] = 720 * 480 * 2, + .min_bufsize[1] = 720 * 480 * 2, + .channel_bufsize[0] = 1920 * 1080 * 2, + .channel_bufsize[1] = 720 * 576 * 2, +}; + +static struct vpif_device vpif_obj = { {NULL} }; +static struct device *vpif_dev; +static void vpif_calculate_offsets(struct channel_obj *ch); +static void vpif_config_addr(struct channel_obj *ch, int muxmode); + +/* + * buffer_prepare: This is the callback function called from vb2_qbuf() + * function the buffer is prepared and user space virtual address is converted + * into physical address + */ +static int vpif_buffer_prepare(struct vb2_buffer *vb) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_queue *q = vb->vb2_queue; + struct common_obj *common; + unsigned long addr; + + common = &fh->channel->common[VPIF_VIDEO_INDEX]; + if (vb->state != VB2_BUF_STATE_ACTIVE && + vb->state != VB2_BUF_STATE_PREPARED) { + vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage); + if (vb2_plane_vaddr(vb, 0) && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) + goto buf_align_exit; + + addr = vb2_dma_contig_plane_dma_addr(vb, 0); + if (q->streaming && + (V4L2_BUF_TYPE_SLICED_VBI_OUTPUT != q->type)) { + if (!ISALIGNED(addr + common->ytop_off) || + !ISALIGNED(addr + common->ybtm_off) || + !ISALIGNED(addr + common->ctop_off) || + !ISALIGNED(addr + common->cbtm_off)) + goto buf_align_exit; + } + } + return 0; + +buf_align_exit: + vpif_err("buffer offset not aligned to 8 bytes\n"); + return -EINVAL; +} + +/* + * vpif_buffer_queue_setup: This function allocates memory for the buffers + */ +static int vpif_buffer_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + unsigned long size; + + if (V4L2_MEMORY_MMAP == common->memory) { + size = config_params.channel_bufsize[ch->channel_id]; + /* + * Checking if the buffer size exceeds the available buffer + * ycmux_mode = 0 means 1 channel mode HD and + * ycmux_mode = 1 means 2 channels mode SD + */ + if (ch->vpifparams.std_info.ycmux_mode == 0) { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + (config_params.video_limit[0] + + config_params.video_limit[1])) + (*nbuffers)--; + } else { + if (config_params.video_limit[ch->channel_id]) + while (size * *nbuffers > + config_params.video_limit[ch->channel_id]) + (*nbuffers)--; + } + } else { + size = common->fmt.fmt.pix.sizeimage; + } + + if (*nbuffers < config_params.min_numbuffers) + *nbuffers = config_params.min_numbuffers; + + *nplanes = 1; + sizes[0] = size; + alloc_ctxs[0] = common->alloc_ctx; + return 0; +} + +/* + * vpif_buffer_queue: This function adds the buffer to DMA queue + */ +static void vpif_buffer_queue(struct vb2_buffer *vb) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpif_disp_buffer *buf = container_of(vb, + struct vpif_disp_buffer, vb); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + /* add the buffer to the DMA queue */ + list_add_tail(&buf->list, &common->dma_queue); +} + +/* + * vpif_buf_cleanup: This function is called from the videobuf2 layer to + * free memory allocated to the buffers + */ +static void vpif_buf_cleanup(struct vb2_buffer *vb) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vb->vb2_queue); + struct vpif_disp_buffer *buf = container_of(vb, + struct vpif_disp_buffer, vb); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned long flags; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + spin_lock_irqsave(&common->irqlock, flags); + if (vb->state == VB2_BUF_STATE_ACTIVE) + list_del_init(&buf->list); + spin_unlock_irqrestore(&common->irqlock, flags); +} + +static void vpif_wait_prepare(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_unlock(&common->lock); +} + +static void vpif_wait_finish(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); +} + +static int vpif_buffer_init(struct vb2_buffer *vb) +{ + struct vpif_disp_buffer *buf = container_of(vb, + struct vpif_disp_buffer, vb); + + INIT_LIST_HEAD(&buf->list); + + return 0; +} + +static u8 channel_first_int[VPIF_NUMOBJECTS][2] = { {1, 1} }; + +static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vpif_display_config *vpif_config_data = + vpif_dev->platform_data; + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpif = &ch->vpifparams; + unsigned long addr = 0; + int ret; + + /* If buffer queue is empty, return error */ + if (list_empty(&common->dma_queue)) { + vpif_err("buffer queue is empty\n"); + return -EIO; + } + + /* Get the next frame from the buffer queue */ + common->next_frm = common->cur_frm = + list_entry(common->dma_queue.next, + struct vpif_disp_buffer, list); + + list_del(&common->cur_frm->list); + /* Mark state of the current frame to active */ + common->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE; + + /* Initialize field_id and started member */ + ch->field_id = 0; + common->started = 1; + addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0); + /* Calculate the offset for Y and C data in the buffer */ + vpif_calculate_offsets(ch); + + if ((ch->vpifparams.std_info.frm_fmt && + ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) + && (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) + || (!ch->vpifparams.std_info.frm_fmt + && (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { + vpif_err("conflict in field format and std format\n"); + return -EINVAL; + } + + /* clock settings */ + ret = + vpif_config_data->set_clock(ch->vpifparams.std_info.ycmux_mode, + ch->vpifparams.std_info.hd_sd); + if (ret < 0) { + vpif_err("can't set clock\n"); + return ret; + } + + /* set the parameters and addresses */ + ret = vpif_set_video_params(vpif, ch->channel_id + 2); + if (ret < 0) + return ret; + + common->started = ret; + vpif_config_addr(ch, ret); + common->set_addr((addr + common->ytop_off), + (addr + common->ybtm_off), + (addr + common->ctop_off), + (addr + common->cbtm_off)); + + /* Set interrupt for both the fields in VPIF + Register enable channel in VPIF register */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + channel2_intr_assert(); + channel2_intr_enable(1); + enable_channel2(1); + if (vpif_config_data->ch2_clip_en) + channel2_clipping_enable(1); + } + + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) + || (common->started == 2)) { + channel3_intr_assert(); + channel3_intr_enable(1); + enable_channel3(1); + if (vpif_config_data->ch3_clip_en) + channel3_clipping_enable(1); + } + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; + + return 0; +} + +/* abort streaming and wait for last buffer */ +static int vpif_stop_streaming(struct vb2_queue *vq) +{ + struct vpif_fh *fh = vb2_get_drv_priv(vq); + struct channel_obj *ch = fh->channel; + struct common_obj *common; + + if (!vb2_is_streaming(vq)) + return 0; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + /* release all active buffers */ + while (!list_empty(&common->dma_queue)) { + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_disp_buffer, list); + list_del(&common->next_frm->list); + vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR); + } + + return 0; +} + +static struct vb2_ops video_qops = { + .queue_setup = vpif_buffer_queue_setup, + .wait_prepare = vpif_wait_prepare, + .wait_finish = vpif_wait_finish, + .buf_init = vpif_buffer_init, + .buf_prepare = vpif_buffer_prepare, + .start_streaming = vpif_start_streaming, + .stop_streaming = vpif_stop_streaming, + .buf_cleanup = vpif_buf_cleanup, + .buf_queue = vpif_buffer_queue, +}; + +static void process_progressive_mode(struct common_obj *common) +{ + unsigned long addr = 0; + + /* Get the next buffer from buffer queue */ + common->next_frm = list_entry(common->dma_queue.next, + struct vpif_disp_buffer, list); + /* Remove that buffer from the buffer queue */ + list_del(&common->next_frm->list); + /* Mark status of the buffer as active */ + common->next_frm->vb.state = VB2_BUF_STATE_ACTIVE; + + /* Set top and bottom field addrs in VPIF registers */ + addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0); + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); +} + +static void process_interlaced_mode(int fid, struct common_obj *common) +{ + /* device field id and local field id are in sync */ + /* If this is even field */ + if (0 == fid) { + if (common->cur_frm == common->next_frm) + return; + + /* one frame is displayed If next frame is + * available, release cur_frm and move on */ + /* Copy frame display time */ + do_gettimeofday(&common->cur_frm->vb.v4l2_buf.timestamp); + /* Change status of the cur_frm */ + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_DONE); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + + } else if (1 == fid) { /* odd field */ + if (list_empty(&common->dma_queue) + || (common->cur_frm != common->next_frm)) { + return; + } + /* one field is displayed configure the next + * frame if it is available else hold on current + * frame */ + /* Get next from the buffer queue */ + process_progressive_mode(common); + + } +} + +/* + * vpif_channel_isr: It changes status of the displayed buffer, takes next + * buffer from the queue and sets its address in VPIF registers + */ +static irqreturn_t vpif_channel_isr(int irq, void *dev_id) +{ + struct vpif_device *dev = &vpif_obj; + struct channel_obj *ch; + struct common_obj *common; + enum v4l2_field field; + int fid = -1, i; + int channel_id = 0; + + channel_id = *(int *)(dev_id); + if (!vpif_intr_status(channel_id + 2)) + return IRQ_NONE; + + ch = dev->dev[channel_id]; + field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field; + for (i = 0; i < VPIF_NUMOBJECTS; i++) { + common = &ch->common[i]; + /* If streaming is started in this channel */ + if (0 == common->started) + continue; + + if (1 == ch->vpifparams.std_info.frm_fmt) { + if (list_empty(&common->dma_queue)) + continue; + + /* Progressive mode */ + if (!channel_first_int[i][channel_id]) { + /* Mark status of the cur_frm to + * done and unlock semaphore on it */ + do_gettimeofday(&common->cur_frm->vb. + v4l2_buf.timestamp); + vb2_buffer_done(&common->cur_frm->vb, + VB2_BUF_STATE_DONE); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + } + + channel_first_int[i][channel_id] = 0; + process_progressive_mode(common); + } else { + /* Interlaced mode */ + /* If it is first interrupt, ignore it */ + + if (channel_first_int[i][channel_id]) { + channel_first_int[i][channel_id] = 0; + continue; + } + + if (0 == i) { + ch->field_id ^= 1; + /* Get field id from VPIF registers */ + fid = vpif_channel_getfid(ch->channel_id + 2); + /* If fid does not match with stored field id */ + if (fid != ch->field_id) { + /* Make them in sync */ + if (0 == fid) + ch->field_id = fid; + + return IRQ_HANDLED; + } + } + process_interlaced_mode(fid, common); + } + } + + return IRQ_HANDLED; +} + +static int vpif_update_std_info(struct channel_obj *ch) +{ + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + const struct vpif_channel_config_params *config; + + int i; + + for (i = 0; i < vpif_ch_params_count; i++) { + config = &ch_params[i]; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } else { + vpif_dbg(2, debug, "HD format\n"); + if (config->dv_preset == vid_ch->dv_preset) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } + } + + if (i == vpif_ch_params_count) { + vpif_dbg(1, debug, "Format not found\n"); + return -EINVAL; + } + + return 0; +} + +static int vpif_update_resolution(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + + if (!vid_ch->stdid && !vid_ch->dv_preset && !vid_ch->bt_timings.height) + return -EINVAL; + + if (vid_ch->stdid || vid_ch->dv_preset) { + if (vpif_update_std_info(ch)) + return -EINVAL; + } + + common->fmt.fmt.pix.width = std_info->width; + common->fmt.fmt.pix.height = std_info->height; + vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n", + common->fmt.fmt.pix.width, common->fmt.fmt.pix.height); + + /* Set height and width paramateres */ + common->height = std_info->height; + common->width = std_info->width; + + return 0; +} + +/* + * vpif_calculate_offsets: This function calculates buffers offset for Y and C + * in the top and bottom field + */ +static void vpif_calculate_offsets(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpifparams = &ch->vpifparams; + enum v4l2_field field = common->fmt.fmt.pix.field; + struct video_obj *vid_ch = &ch->video; + unsigned int hpitch, vpitch, sizeimage; + + if (V4L2_FIELD_ANY == common->fmt.fmt.pix.field) { + if (ch->vpifparams.std_info.frm_fmt) + vid_ch->buf_field = V4L2_FIELD_NONE; + else + vid_ch->buf_field = V4L2_FIELD_INTERLACED; + } else { + vid_ch->buf_field = common->fmt.fmt.pix.field; + } + + sizeimage = common->fmt.fmt.pix.sizeimage; + + hpitch = common->fmt.fmt.pix.bytesperline; + vpitch = sizeimage / (hpitch * 2); + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + common->ytop_off = 0; + common->ybtm_off = hpitch; + common->ctop_off = sizeimage / 2; + common->cbtm_off = sizeimage / 2 + hpitch; + } else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) { + common->ytop_off = 0; + common->ybtm_off = sizeimage / 4; + common->ctop_off = sizeimage / 2; + common->cbtm_off = common->ctop_off + sizeimage / 4; + } else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) { + common->ybtm_off = 0; + common->ytop_off = sizeimage / 4; + common->cbtm_off = sizeimage / 2; + common->ctop_off = common->cbtm_off + sizeimage / 4; + } + + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + vpifparams->video_params.storage_mode = 1; + } else { + vpifparams->video_params.storage_mode = 0; + } + + if (ch->vpifparams.std_info.frm_fmt == 1) { + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } else { + if ((field == V4L2_FIELD_ANY) || + (field == V4L2_FIELD_INTERLACED)) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline * 2; + else + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } + + ch->vpifparams.video_params.stdid = ch->vpifparams.std_info.stdid; +} + +static void vpif_config_format(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + common->fmt.fmt.pix.field = V4L2_FIELD_ANY; + if (config_params.numbuffers[ch->channel_id] == 0) + common->memory = V4L2_MEMORY_USERPTR; + else + common->memory = V4L2_MEMORY_MMAP; + + common->fmt.fmt.pix.sizeimage = + config_params.channel_bufsize[ch->channel_id]; + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P; + common->fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; +} + +static int vpif_check_format(struct channel_obj *ch, + struct v4l2_pix_format *pixfmt) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + enum v4l2_field field = pixfmt->field; + u32 sizeimage, hpitch, vpitch; + + if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) + goto invalid_fmt_exit; + + if (!(VPIF_VALID_FIELD(field))) + goto invalid_fmt_exit; + + if (pixfmt->bytesperline <= 0) + goto invalid_pitch_exit; + + sizeimage = pixfmt->sizeimage; + + if (vpif_update_resolution(ch)) + return -EINVAL; + + hpitch = pixfmt->bytesperline; + vpitch = sizeimage / (hpitch * 2); + + /* Check for valid value of pitch */ + if ((hpitch < ch->vpifparams.std_info.width) || + (vpitch < ch->vpifparams.std_info.height)) + goto invalid_pitch_exit; + + /* Check for 8 byte alignment */ + if (!ISALIGNED(hpitch)) { + vpif_err("invalid pitch alignment\n"); + return -EINVAL; + } + pixfmt->width = common->fmt.fmt.pix.width; + pixfmt->height = common->fmt.fmt.pix.height; + + return 0; + +invalid_fmt_exit: + vpif_err("invalid field format\n"); + return -EINVAL; + +invalid_pitch_exit: + vpif_err("invalid pitch\n"); + return -EINVAL; +} + +static void vpif_config_addr(struct channel_obj *ch, int muxmode) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (VPIF_CHANNEL3_VIDEO == ch->channel_id) { + common->set_addr = ch3_set_videobuf_addr; + } else { + if (2 == muxmode) + common->set_addr = ch2_set_videobuf_addr_yc_nmux; + else + common->set_addr = ch2_set_videobuf_addr; + } +} + +/* + * vpif_mmap: It is used to map kernel space buffers into user spaces + */ +static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + int ret; + + vpif_dbg(2, debug, "vpif_mmap\n"); + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + ret = vb2_mmap(&common->buffer_queue, vma); + mutex_unlock(&common->lock); + return ret; +} + +/* + * vpif_poll: It is used for select/poll system call + */ +static unsigned int vpif_poll(struct file *filep, poll_table *wait) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + unsigned int res = 0; + + if (common->started) { + mutex_lock(&common->lock); + res = vb2_poll(&common->buffer_queue, filep, wait); + mutex_unlock(&common->lock); + } + + return res; +} + +/* + * vpif_open: It creates object of file handle structure and stores it in + * private_data member of filepointer + */ +static int vpif_open(struct file *filep) +{ + struct video_device *vdev = video_devdata(filep); + struct channel_obj *ch = video_get_drvdata(vdev); + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_fh *fh; + + /* Allocate memory for the file handle object */ + fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL); + if (fh == NULL) { + vpif_err("unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + if (mutex_lock_interruptible(&common->lock)) { + kfree(fh); + return -ERESTARTSYS; + } + /* store pointer to fh in private_data member of filep */ + filep->private_data = fh; + fh->channel = ch; + fh->initialized = 0; + if (!ch->initialized) { + fh->initialized = 1; + ch->initialized = 1; + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + } + + /* Increment channel usrs counter */ + atomic_inc(&ch->usrs); + /* Set io_allowed[VPIF_VIDEO_INDEX] member to false */ + fh->io_allowed[VPIF_VIDEO_INDEX] = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&ch->prio, &fh->prio); + mutex_unlock(&common->lock); + + return 0; +} + +/* + * vpif_release: This function deletes buffer queue, frees the buffers and + * the vpif file handle + */ +static int vpif_release(struct file *filep) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + mutex_lock(&common->lock); + /* if this instance is doing IO */ + if (fh->io_allowed[VPIF_VIDEO_INDEX]) { + /* Reset io_usrs member of channel object */ + common->io_usrs = 0; + /* Disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel3(0); + channel3_intr_enable(0); + } + common->started = 0; + + /* Free buffers allocated */ + vb2_queue_release(&common->buffer_queue); + vb2_dma_contig_cleanup_ctx(common->alloc_ctx); + + common->numbuffers = + config_params.numbuffers[ch->channel_id]; + } + + /* Decrement channel usrs counter */ + atomic_dec(&ch->usrs); + /* If this file handle has initialize encoder device, reset it */ + if (fh->initialized) + ch->initialized = 0; + + /* Close the priority */ + v4l2_prio_close(&ch->prio, fh->prio); + filep->private_data = NULL; + fh->initialized = 0; + mutex_unlock(&common->lock); + kfree(fh); + + return 0; +} + +/* functions implementing ioctls */ +/** + * vpif_querycap() - QUERYCAP handler + * @file: file ptr + * @priv: file handle + * @cap: ptr to v4l2_capability structure + */ +static int vpif_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpif_display_config *config = vpif_dev->platform_data; + + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + strlcpy(cap->driver, "vpif display", sizeof(cap->driver)); + strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info)); + strlcpy(cap->card, config->card_name, sizeof(cap->card)); + + return 0; +} + +static int vpif_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + if (fmt->index != 0) { + vpif_err("Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + strcpy(fmt->description, "YCbCr4:2:2 YC Planar"); + fmt->pixelformat = V4L2_PIX_FMT_YUV422P; + + return 0; +} + +static int vpif_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + /* Check the validity of the buffer type */ + if (common->fmt.type != fmt->type) + return -EINVAL; + + if (vpif_update_resolution(ch)) + return -EINVAL; + *fmt = common->fmt; + return 0; +} + +static int vpif_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct v4l2_pix_format *pixfmt; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + + /* Check for the priority */ + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (0 != ret) + return ret; + fh->initialized = 1; + } + + if (common->started) { + vpif_dbg(1, debug, "Streaming in progress\n"); + return -EBUSY; + } + + pixfmt = &fmt->fmt.pix; + /* Check for valid field format */ + ret = vpif_check_format(ch, pixfmt); + if (ret) + return ret; + + /* store the pix format in the channel object */ + common->fmt.fmt.pix = *pixfmt; + /* store the format in the channel object */ + common->fmt = *fmt; + return 0; +} + +static int vpif_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + int ret = 0; + + ret = vpif_check_format(ch, pixfmt); + if (ret) { + *pixfmt = common->fmt.fmt.pix; + pixfmt->sizeimage = pixfmt->width * pixfmt->height * 2; + } + + return ret; +} + +static int vpif_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + enum v4l2_field field; + struct vb2_queue *q; + u8 index = 0; + + /* This file handle has not initialized the channel, + It is not allowed to do settings */ + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_err("Channel Busy\n"); + return -EBUSY; + } + } + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != reqbuf->type) + return -EINVAL; + + index = VPIF_VIDEO_INDEX; + + common = &ch->common[index]; + + if (common->fmt.type != reqbuf->type || !vpif_dev) + return -EINVAL; + if (0 != common->io_usrs) + return -EBUSY; + + if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY) + field = V4L2_FIELD_INTERLACED; + else + field = common->fmt.fmt.pix.field; + } else { + field = V4L2_VBI_INTERLACED; + } + /* Initialize videobuf2 queue as per the buffer type */ + common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev); + if (!common->alloc_ctx) { + vpif_err("Failed to get the context\n"); + return -EINVAL; + } + q = &common->buffer_queue; + q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = fh; + q->ops = &video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct vpif_disp_buffer); + + vb2_queue_init(q); + + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed[index] = 1; + /* Increment io usrs member of channel object to 1 */ + common->io_usrs = 1; + /* Store type of memory requested in channel object */ + common->memory = reqbuf->memory; + INIT_LIST_HEAD(&common->dma_queue); + /* Allocate buffers */ + return vb2_reqbufs(&common->buffer_queue, reqbuf); +} + +static int vpif_querybuf(struct file *file, void *priv, + struct v4l2_buffer *tbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (common->fmt.type != tbuf->type) + return -EINVAL; + + return vb2_querybuf(&common->buffer_queue, tbuf); +} + +static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct vpif_fh *fh = NULL; + struct channel_obj *ch = NULL; + struct common_obj *common = NULL; + + if (!buf || !priv) + return -EINVAL; + + fh = priv; + ch = fh->channel; + if (!ch) + return -EINVAL; + + common = &(ch->common[VPIF_VIDEO_INDEX]); + if (common->fmt.type != buf->type) + return -EINVAL; + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + return vb2_qbuf(&common->buffer_queue, buf); +} + +static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (!(*std_id & VPIF_V4L2_STD)) + return -EINVAL; + + if (common->started) { + vpif_err("streaming in progress\n"); + return -EBUSY; + } + + /* Call encoder subdevice function to set the standard */ + ch->video.stdid = *std_id; + ch->video.dv_preset = V4L2_DV_INVALID; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); + + /* Get the information about the standard */ + if (vpif_update_resolution(ch)) + return -EINVAL; + + if ((ch->vpifparams.std_info.width * + ch->vpifparams.std_info.height * 2) > + config_params.channel_bufsize[ch->channel_id]) { + vpif_err("invalid std for this size\n"); + return -EINVAL; + } + + common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width; + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, + s_std_output, *std_id); + if (ret < 0) { + vpif_err("Failed to set output standard\n"); + return ret; + } + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core, + s_std, *std_id); + if (ret < 0) + vpif_err("Failed to set standard for sub devices\n"); + return ret; +} + +static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *std = ch->video.stdid; + return 0; +} + +static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + return vb2_dqbuf(&common->buffer_queue, p, + (file->f_flags & O_NONBLOCK)); +} + +static int vpif_streamon(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id]; + int ret = 0; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + /* If Streaming is already started, return error */ + if (common->started) { + vpif_err("channel->started\n"); + return -EBUSY; + } + + if ((ch->channel_id == VPIF_CHANNEL2_VIDEO + && oth_ch->common[VPIF_VIDEO_INDEX].started && + ch->vpifparams.std_info.ycmux_mode == 0) + || ((ch->channel_id == VPIF_CHANNEL3_VIDEO) + && (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) { + vpif_err("other channel is using\n"); + return -EBUSY; + } + + ret = vpif_check_format(ch, &common->fmt.fmt.pix); + if (ret < 0) + return ret; + + /* Call vb2_streamon to start streaming in videobuf2 */ + ret = vb2_streamon(&common->buffer_queue, buftype); + if (ret < 0) { + vpif_err("vb2_streamon\n"); + return ret; + } + + return ret; +} + +static int vpif_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_display_config *vpif_config_data = + vpif_dev->platform_data; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + if (!common->started) { + vpif_err("channel->started\n"); + return -EINVAL; + } + + if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + /* disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + if (vpif_config_data->ch2_clip_en) + channel2_clipping_enable(0); + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + if (vpif_config_data->ch3_clip_en) + channel3_clipping_enable(0); + enable_channel3(0); + channel3_intr_enable(0); + } + } + + common->started = 0; + return vb2_streamoff(&common->buffer_queue, buftype); +} + +static int vpif_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != crop->type) + return -EINVAL; + + crop->bounds.left = crop->bounds.top = 0; + crop->defrect.left = crop->defrect.top = 0; + crop->defrect.height = crop->bounds.height = common->height; + crop->defrect.width = crop->bounds.width = common->width; + + return 0; +} + +static int vpif_enum_output(struct file *file, void *fh, + struct v4l2_output *output) +{ + + struct vpif_display_config *config = vpif_dev->platform_data; + + if (output->index >= config->output_count) { + vpif_dbg(1, debug, "Invalid output index\n"); + return -EINVAL; + } + + strcpy(output->name, config->output[output->index]); + output->type = V4L2_OUTPUT_TYPE_ANALOG; + output->std = VPIF_V4L2_STD; + + return 0; +} + +static int vpif_s_output(struct file *file, void *priv, unsigned int i) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (common->started) { + vpif_err("Streaming in progress\n"); + return -EBUSY; + } + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, + s_routing, 0, i, 0); + + if (ret < 0) + vpif_err("Failed to set output standard\n"); + + vid_ch->output_id = i; + return ret; +} + +static int vpif_g_output(struct file *file, void *priv, unsigned int *i) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + *i = vid_ch->output_id; + + return 0; +} + +static int vpif_g_priority(struct file *file, void *priv, enum v4l2_priority *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *p = v4l2_prio_max(&ch->prio); + + return 0; +} + +static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_prio_change(&ch->prio, &fh->prio, p); +} + +/** + * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, enum_dv_presets, preset); +} + +/** + * vpif_s_dv_presets() - S_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + int ret = 0; + + if (common->started) { + vpif_dbg(1, debug, "streaming in progress\n"); + return -EBUSY; + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (ret != 0) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + ch->video.dv_preset = preset->preset; + ch->video.stdid = V4L2_STD_UNKNOWN; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); + + /* Get the information about the standard */ + if (vpif_update_resolution(ch)) { + ret = -EINVAL; + } else { + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, s_dv_preset, preset); + } + + mutex_unlock(&common->lock); + + return ret; +} +/** + * vpif_g_dv_presets() - G_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + preset->preset = ch->video.dv_preset; + + return 0; +} +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD) { + vpif_dbg(2, debug, "Custom DV timings not supported by " + "subdevice\n"); + return -EINVAL; + } + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + *bt = timings->bt; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", + VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + std_info->dv_preset = V4L2_DV_INVALID; + + vid_ch->stdid = 0; + vid_ch->dv_preset = V4L2_DV_INVALID; + + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + + timings->bt = *bt; + + return 0; +} + +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, + g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, + s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + +/* vpif display ioctl operations */ +static const struct v4l2_ioctl_ops vpif_ioctl_ops = { + .vidioc_querycap = vpif_querycap, + .vidioc_g_priority = vpif_g_priority, + .vidioc_s_priority = vpif_s_priority, + .vidioc_enum_fmt_vid_out = vpif_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vpif_g_fmt_vid_out, + .vidioc_s_fmt_vid_out = vpif_s_fmt_vid_out, + .vidioc_try_fmt_vid_out = vpif_try_fmt_vid_out, + .vidioc_reqbufs = vpif_reqbufs, + .vidioc_querybuf = vpif_querybuf, + .vidioc_qbuf = vpif_qbuf, + .vidioc_dqbuf = vpif_dqbuf, + .vidioc_streamon = vpif_streamon, + .vidioc_streamoff = vpif_streamoff, + .vidioc_s_std = vpif_s_std, + .vidioc_g_std = vpif_g_std, + .vidioc_enum_output = vpif_enum_output, + .vidioc_s_output = vpif_s_output, + .vidioc_g_output = vpif_g_output, + .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_presets = vpif_enum_dv_presets, + .vidioc_s_dv_preset = vpif_s_dv_preset, + .vidioc_g_dv_preset = vpif_g_dv_preset, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, +}; + +static const struct v4l2_file_operations vpif_fops = { + .owner = THIS_MODULE, + .open = vpif_open, + .release = vpif_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpif_mmap, + .poll = vpif_poll +}; + +static struct video_device vpif_video_template = { + .name = "vpif", + .fops = &vpif_fops, + .ioctl_ops = &vpif_ioctl_ops, + .tvnorms = VPIF_V4L2_STD, + .current_norm = V4L2_STD_625_50, + +}; + +/*Configure the channels, buffer sizei, request irq */ +static int initialize_vpif(void) +{ + int free_channel_objects_index; + int free_buffer_channel_index; + int free_buffer_index; + int err = 0, i, j; + + /* Default number of buffers should be 3 */ + if ((ch2_numbuffers > 0) && + (ch2_numbuffers < config_params.min_numbuffers)) + ch2_numbuffers = config_params.min_numbuffers; + if ((ch3_numbuffers > 0) && + (ch3_numbuffers < config_params.min_numbuffers)) + ch3_numbuffers = config_params.min_numbuffers; + + /* Set buffer size to min buffers size if invalid buffer size is + * given */ + if (ch2_bufsize < config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]) + ch2_bufsize = + config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]; + if (ch3_bufsize < config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]) + ch3_bufsize = + config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]; + + config_params.numbuffers[VPIF_CHANNEL2_VIDEO] = ch2_numbuffers; + + if (ch2_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL2_VIDEO] = + ch2_bufsize; + } + config_params.numbuffers[VPIF_CHANNEL3_VIDEO] = ch3_numbuffers; + + if (ch3_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL3_VIDEO] = + ch3_bufsize; + } + + /* Allocate memory for six channel objects */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + vpif_obj.dev[i] = + kzalloc(sizeof(struct channel_obj), GFP_KERNEL); + /* If memory allocation fails, return error */ + if (!vpif_obj.dev[i]) { + free_channel_objects_index = i; + err = -ENOMEM; + goto vpif_init_free_channel_objects; + } + } + + free_channel_objects_index = VPIF_DISPLAY_MAX_DEVICES; + free_buffer_channel_index = VPIF_DISPLAY_NUM_CHANNELS; + free_buffer_index = config_params.numbuffers[i - 1]; + + return 0; + +vpif_init_free_channel_objects: + for (j = 0; j < free_channel_objects_index; j++) + kfree(vpif_obj.dev[j]); + return err; +} + +/* + * vpif_probe: This function creates device entries by register itself to the + * V4L2 driver and initializes fields of each channel objects + */ +static __init int vpif_probe(struct platform_device *pdev) +{ + struct vpif_subdev_info *subdevdata; + struct vpif_display_config *config; + int i, j = 0, k, q, m, err = 0; + struct i2c_adapter *i2c_adap; + struct common_obj *common; + struct channel_obj *ch; + struct video_device *vfd; + struct resource *res; + int subdev_count; + size_t size; + + vpif_dev = &pdev->dev; + err = initialize_vpif(); + + if (err) { + v4l2_err(vpif_dev->driver, "Error initializing vpif\n"); + return err; + } + + err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev); + if (err) { + v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n"); + return err; + } + + k = 0; + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, vpif_channel_isr, IRQF_SHARED, + "VPIF_Display", + (void *)(&vpif_obj.dev[k]->channel_id))) { + err = -EBUSY; + goto vpif_int_err; + } + } + k++; + } + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (vfd == NULL) { + for (j = 0; j < i; j++) { + ch = vpif_obj.dev[j]; + video_device_release(ch->video_dev); + } + err = -ENOMEM; + goto vpif_int_err; + } + + /* Initialize field of video device */ + *vfd = vpif_video_template; + vfd->v4l2_dev = &vpif_obj.v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), + "VPIF_Display_DRIVER_V%s", + VPIF_DISPLAY_VERSION); + + /* Set video_dev to the video device */ + ch->video_dev = vfd; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) { + size = resource_size(res); + /* The resources are divided into two equal memory and when + * we have HD output we can add them together + */ + for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + ch->channel_id = j; + + /* only enabled if second resource exists */ + config_params.video_limit[ch->channel_id] = 0; + if (size) + config_params.video_limit[ch->channel_id] = + size/2; + } + } + + for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + /* Initialize field of the channel objects */ + atomic_set(&ch->usrs, 0); + for (k = 0; k < VPIF_NUMOBJECTS; k++) { + ch->common[k].numbuffers = 0; + common = &ch->common[k]; + common->io_usrs = 0; + common->started = 0; + spin_lock_init(&common->irqlock); + mutex_init(&common->lock); + common->numbuffers = 0; + common->set_addr = NULL; + common->ytop_off = common->ybtm_off = 0; + common->ctop_off = common->cbtm_off = 0; + common->cur_frm = common->next_frm = NULL; + memset(&common->fmt, 0, sizeof(common->fmt)); + common->numbuffers = config_params.numbuffers[k]; + + } + ch->initialized = 0; + ch->channel_id = j; + if (j < 2) + ch->common[VPIF_VIDEO_INDEX].numbuffers = + config_params.numbuffers[ch->channel_id]; + else + ch->common[VPIF_VIDEO_INDEX].numbuffers = 0; + + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + + /* Initialize prio member of channel object */ + v4l2_prio_init(&ch->prio); + ch->common[VPIF_VIDEO_INDEX].fmt.type = + V4L2_BUF_TYPE_VIDEO_OUTPUT; + ch->video_dev->lock = &common->lock; + + /* register video device */ + vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n", + (int)ch, (int)&ch->video_dev); + + err = video_register_device(ch->video_dev, + VFL_TYPE_GRABBER, (j ? 3 : 2)); + if (err < 0) + goto probe_out; + + video_set_drvdata(ch->video_dev, ch); + } + + i2c_adap = i2c_get_adapter(1); + config = pdev->dev.platform_data; + subdev_count = config->subdev_count; + subdevdata = config->subdevinfo; + vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, + GFP_KERNEL); + if (vpif_obj.sd == NULL) { + vpif_err("unable to allocate memory for subdevice pointers\n"); + err = -ENOMEM; + goto probe_out; + } + + for (i = 0; i < subdev_count; i++) { + vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, + i2c_adap, + &subdevdata[i].board_info, + NULL); + if (!vpif_obj.sd[i]) { + vpif_err("Error registering v4l2 subdevice\n"); + goto probe_subdev_out; + } + + if (vpif_obj.sd[i]) + vpif_obj.sd[i]->grp_id = 1 << i; + } + + v4l2_info(&vpif_obj.v4l2_dev, + " VPIF display driver initialized\n"); + return 0; + +probe_subdev_out: + kfree(vpif_obj.sd); +probe_out: + for (k = 0; k < j; k++) { + ch = vpif_obj.dev[k]; + video_unregister_device(ch->video_dev); + video_device_release(ch->video_dev); + ch->video_dev = NULL; + } +vpif_int_err: + v4l2_device_unregister(&vpif_obj.v4l2_dev); + vpif_err("VPIF IRQ request failed\n"); + for (q = k; k >= 0; k--) { + for (m = i; m >= res->start; m--) + free_irq(m, (void *)(&vpif_obj.dev[k]->channel_id)); + res = platform_get_resource(pdev, IORESOURCE_IRQ, k-1); + m = res->end; + } + + return err; +} + +/* + * vpif_remove: It un-register channels from V4L2 driver + */ +static int vpif_remove(struct platform_device *device) +{ + struct channel_obj *ch; + int i; + + v4l2_device_unregister(&vpif_obj.v4l2_dev); + + /* un-register device */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + + ch->video_dev = NULL; + } + + return 0; +} + +#ifdef CONFIG_PM +static int vpif_suspend(struct device *dev) +{ + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (atomic_read(&ch->usrs) && common->io_usrs) { + /* Disable channel */ + if (ch->channel_id == VPIF_CHANNEL2_VIDEO) { + enable_channel2(0); + channel2_intr_enable(0); + } + if (ch->channel_id == VPIF_CHANNEL3_VIDEO || + common->started == 2) { + enable_channel3(0); + channel3_intr_enable(0); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +static int vpif_resume(struct device *dev) +{ + + struct common_obj *common; + struct channel_obj *ch; + int i; + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + common = &ch->common[VPIF_VIDEO_INDEX]; + mutex_lock(&common->lock); + if (atomic_read(&ch->usrs) && common->io_usrs) { + /* Enable channel */ + if (ch->channel_id == VPIF_CHANNEL2_VIDEO) { + enable_channel2(1); + channel2_intr_enable(1); + } + if (ch->channel_id == VPIF_CHANNEL3_VIDEO || + common->started == 2) { + enable_channel3(1); + channel3_intr_enable(1); + } + } + mutex_unlock(&common->lock); + } + + return 0; +} + +static const struct dev_pm_ops vpif_pm = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_pm) +#else +#define vpif_pm_ops NULL +#endif + +static __refdata struct platform_driver vpif_driver = { + .driver = { + .name = "vpif_display", + .owner = THIS_MODULE, + .pm = vpif_pm_ops, + }, + .probe = vpif_probe, + .remove = vpif_remove, +}; + +static __init int vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} + +/* + * vpif_cleanup: This function un-registers device and driver to the kernel, + * frees requested irq handler and de-allocates memory allocated for channel + * objects. + */ +static void vpif_cleanup(void) +{ + struct platform_device *pdev; + struct resource *res; + int irq_num; + int i = 0; + + pdev = container_of(vpif_dev, struct platform_device, dev); + + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, + (void *)(&vpif_obj.dev[i]->channel_id)); + i++; + } + + platform_driver_unregister(&vpif_driver); + kfree(vpif_obj.sd); + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) + kfree(vpif_obj.dev[i]); +} + +module_init(vpif_init); +module_exit(vpif_cleanup); diff --git a/drivers/media/platform/davinci/vpif_display.h b/drivers/media/platform/davinci/vpif_display.h new file mode 100644 index 00000000000..8967ffb4405 --- /dev/null +++ b/drivers/media/platform/davinci/vpif_display.h @@ -0,0 +1,181 @@ +/* + * VPIF display header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DAVINCIHD_DISPLAY_H +#define DAVINCIHD_DISPLAY_H + +/* Header files */ +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/videobuf-core.h> +#include <media/videobuf2-dma-contig.h> +#include <media/davinci/vpif_types.h> + +#include "vpif.h" + +/* Macros */ +#define VPIF_DISPLAY_VERSION "0.0.2" + +#define VPIF_VALID_FIELD(field) \ + (((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \ + (((V4L2_FIELD_INTERLACED == field) || (V4L2_FIELD_SEQ_TB == field)) || \ + (V4L2_FIELD_SEQ_BT == field))) + +#define VPIF_DISPLAY_MAX_DEVICES (2) +#define VPIF_SLICED_BUF_SIZE (256) +#define VPIF_SLICED_MAX_SERVICES (3) +#define VPIF_VIDEO_INDEX (0) +#define VPIF_VBI_INDEX (1) +#define VPIF_HBI_INDEX (2) + +/* Setting it to 1 as HBI/VBI support yet to be added , else 3*/ +#define VPIF_NUMOBJECTS (1) + +/* Macros */ +#define ISALIGNED(a) (0 == ((a) & 7)) + +/* enumerated data types */ +/* Enumerated data type to give id to each device per channel */ +enum vpif_channel_id { + VPIF_CHANNEL2_VIDEO = 0, /* Channel2 Video */ + VPIF_CHANNEL3_VIDEO, /* Channel3 Video */ +}; + +/* structures */ + +struct video_obj { + enum v4l2_field buf_field; + u32 latest_only; /* indicate whether to return + * most recent displayed frame only */ + v4l2_std_id stdid; /* Currently selected or default + * standard */ + u32 dv_preset; + struct v4l2_bt_timings bt_timings; + u32 output_id; /* Current output id */ +}; + +struct vbi_obj { + int num_services; + struct vpif_vbi_params vbiparams; /* vpif parameters for the raw + * vbi data */ +}; + +struct vpif_disp_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct common_obj { + /* Buffer specific parameters */ + u8 *fbuffers[VIDEO_MAX_FRAME]; /* List of buffer pointers for + * storing frames */ + u32 numbuffers; /* number of buffers */ + struct vpif_disp_buffer *cur_frm; /* Pointer pointing to current + * vb2_buffer */ + struct vpif_disp_buffer *next_frm; /* Pointer pointing to next + * vb2_buffer */ + enum v4l2_memory memory; /* This field keeps track of + * type of buffer exchange + * method user has selected */ + struct v4l2_format fmt; /* Used to store the format */ + struct vb2_queue buffer_queue; /* Buffer queue used in + * video-buf */ + /* allocator-specific contexts for each plane */ + struct vb2_alloc_ctx *alloc_ctx; + + struct list_head dma_queue; /* Queue of filled frames */ + spinlock_t irqlock; /* Used in video-buf */ + + /* channel specific parameters */ + struct mutex lock; /* lock used to access this + * structure */ + u32 io_usrs; /* number of users performing + * IO */ + u8 started; /* Indicates whether streaming + * started */ + u32 ytop_off; /* offset of Y top from the + * starting of the buffer */ + u32 ybtm_off; /* offset of Y bottom from the + * starting of the buffer */ + u32 ctop_off; /* offset of C top from the + * starting of the buffer */ + u32 cbtm_off; /* offset of C bottom from the + * starting of the buffer */ + /* Function pointer to set the addresses */ + void (*set_addr) (unsigned long, unsigned long, + unsigned long, unsigned long); + u32 height; + u32 width; +}; + +struct channel_obj { + /* V4l2 specific parameters */ + struct video_device *video_dev; /* Identifies video device for + * this channel */ + struct v4l2_prio_state prio; /* Used to keep track of state of + * the priority */ + atomic_t usrs; /* number of open instances of + * the channel */ + u32 field_id; /* Indicates id of the field + * which is being displayed */ + u8 initialized; /* flag to indicate whether + * encoder is initialized */ + + enum vpif_channel_id channel_id;/* Identifies channel */ + struct vpif_params vpifparams; + struct common_obj common[VPIF_NUMOBJECTS]; + struct video_obj video; + struct vbi_obj vbi; +}; + +/* File handle structure */ +struct vpif_fh { + struct channel_obj *channel; /* pointer to channel object for + * opened device */ + u8 io_allowed[VPIF_NUMOBJECTS]; /* Indicates whether this file handle + * is doing IO */ + enum v4l2_priority prio; /* Used to keep track priority of + * this instance */ + u8 initialized; /* Used to keep track of whether this + * file handle has initialized + * channel or not */ +}; + +/* vpif device structure */ +struct vpif_device { + struct v4l2_device v4l2_dev; + struct channel_obj *dev[VPIF_DISPLAY_NUM_CHANNELS]; + struct v4l2_subdev **sd; + +}; + +struct vpif_config_params { + u32 min_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u32 channel_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u8 numbuffers[VPIF_DISPLAY_NUM_CHANNELS]; + u32 video_limit[VPIF_DISPLAY_NUM_CHANNELS]; + u8 min_numbuffers; +}; + +/* Struct which keeps track of the line numbers for the sliced vbi service */ +struct vpif_service_line { + u16 service_id; + u16 service_line[2]; + u16 enc_service_id; + u8 bytestowrite; +}; + +#endif /* DAVINCIHD_DISPLAY_H */ diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c new file mode 100644 index 00000000000..146e4b01ac1 --- /dev/null +++ b/drivers/media/platform/davinci/vpss.c @@ -0,0 +1,482 @@ +/* + * Copyright (C) 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * common vpss system module platform driver for all video drivers. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <media/davinci/vpss.h> + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VPSS Driver"); +MODULE_AUTHOR("Texas Instruments"); + +/* DM644x defines */ +#define DM644X_SBL_PCR_VPSS (4) + +#define DM355_VPSSBL_INTSEL 0x10 +#define DM355_VPSSBL_EVTSEL 0x14 +/* vpss BL register offsets */ +#define DM355_VPSSBL_CCDCMUX 0x1c +/* vpss CLK register offsets */ +#define DM355_VPSSCLK_CLKCTRL 0x04 +/* masks and shifts */ +#define VPSS_HSSISEL_SHIFT 4 +/* + * VDINT0 - vpss_int0, VDINT1 - vpss_int1, H3A - vpss_int4, + * IPIPE_INT1_SDR - vpss_int5 + */ +#define DM355_VPSSBL_INTSEL_DEFAULT 0xff83ff10 +/* VENCINT - vpss_int8 */ +#define DM355_VPSSBL_EVTSEL_DEFAULT 0x4 + +#define DM365_ISP5_PCCR 0x04 +#define DM365_ISP5_INTSEL1 0x10 +#define DM365_ISP5_INTSEL2 0x14 +#define DM365_ISP5_INTSEL3 0x18 +#define DM365_ISP5_CCDCMUX 0x20 +#define DM365_ISP5_PG_FRAME_SIZE 0x28 +#define DM365_VPBE_CLK_CTRL 0x00 +/* + * vpss interrupts. VDINT0 - vpss_int0, VDINT1 - vpss_int1, + * AF - vpss_int3 + */ +#define DM365_ISP5_INTSEL1_DEFAULT 0x0b1f0100 +/* AEW - vpss_int6, RSZ_INT_DMA - vpss_int5 */ +#define DM365_ISP5_INTSEL2_DEFAULT 0x1f0a0f1f +/* VENC - vpss_int8 */ +#define DM365_ISP5_INTSEL3_DEFAULT 0x00000015 + +/* masks and shifts for DM365*/ +#define DM365_CCDC_PG_VD_POL_SHIFT 0 +#define DM365_CCDC_PG_HD_POL_SHIFT 1 + +#define CCD_SRC_SEL_MASK (BIT_MASK(5) | BIT_MASK(4)) +#define CCD_SRC_SEL_SHIFT 4 + +/* Different SoC platforms supported by this driver */ +enum vpss_platform_type { + DM644X, + DM355, + DM365, +}; + +/* + * vpss operations. Depends on platform. Not all functions are available + * on all platforms. The api, first check if a functio is available before + * invoking it. In the probe, the function ptrs are initialized based on + * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc. + */ +struct vpss_hw_ops { + /* enable clock */ + int (*enable_clock)(enum vpss_clock_sel clock_sel, int en); + /* select input to ccdc */ + void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel); + /* clear wbl overflow bit */ + int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel); +}; + +/* vpss configuration */ +struct vpss_oper_config { + __iomem void *vpss_regs_base0; + __iomem void *vpss_regs_base1; + enum vpss_platform_type platform; + spinlock_t vpss_lock; + struct vpss_hw_ops hw_ops; +}; + +static struct vpss_oper_config oper_cfg; + +/* register access routines */ +static inline u32 bl_regr(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_regs_base0 + offset); +} + +static inline void bl_regw(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_regs_base0 + offset); +} + +static inline u32 vpss_regr(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_regs_base1 + offset); +} + +static inline void vpss_regw(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_regs_base1 + offset); +} + +/* For DM365 only */ +static inline u32 isp5_read(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_regs_base0 + offset); +} + +/* For DM365 only */ +static inline void isp5_write(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_regs_base0 + offset); +} + +static void dm365_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + u32 temp = isp5_read(DM365_ISP5_CCDCMUX) & ~CCD_SRC_SEL_MASK; + + /* if we are using pattern generator, enable it */ + if (src_sel == VPSS_PGLPBK || src_sel == VPSS_CCDCPG) + temp |= 0x08; + + temp |= (src_sel << CCD_SRC_SEL_SHIFT); + isp5_write(temp, DM365_ISP5_CCDCMUX); +} + +static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX); +} + +int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + if (!oper_cfg.hw_ops.select_ccdc_source) + return -EINVAL; + + oper_cfg.hw_ops.select_ccdc_source(src_sel); + return 0; +} +EXPORT_SYMBOL(vpss_select_ccdc_source); + +static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) +{ + u32 mask = 1, val; + + if (wbl_sel < VPSS_PCR_AEW_WBL_0 || + wbl_sel > VPSS_PCR_CCDC_WBL_O) + return -EINVAL; + + /* writing a 0 clear the overflow */ + mask = ~(mask << wbl_sel); + val = bl_regr(DM644X_SBL_PCR_VPSS) & mask; + bl_regw(val, DM644X_SBL_PCR_VPSS); + return 0; +} + +int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) +{ + if (!oper_cfg.hw_ops.clear_wbl_overflow) + return -EINVAL; + + return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel); +} +EXPORT_SYMBOL(vpss_clear_wbl_overflow); + +/* + * dm355_enable_clock - Enable VPSS Clock + * @clock_sel: CLock to be enabled/disabled + * @en: enable/disable flag + * + * This is called to enable or disable a vpss clock + */ +static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + unsigned long flags; + u32 utemp, mask = 0x1, shift = 0; + + switch (clock_sel) { + case VPSS_VPBE_CLOCK: + /* nothing since lsb */ + break; + case VPSS_VENC_CLOCK_SEL: + shift = 2; + break; + case VPSS_CFALD_CLOCK: + shift = 3; + break; + case VPSS_H3A_CLOCK: + shift = 4; + break; + case VPSS_IPIPE_CLOCK: + shift = 5; + break; + case VPSS_CCDC_CLOCK: + shift = 6; + break; + default: + printk(KERN_ERR "dm355_enable_clock:" + " Invalid selector: %d\n", clock_sel); + return -EINVAL; + } + + spin_lock_irqsave(&oper_cfg.vpss_lock, flags); + utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL); + if (!en) + utemp &= ~(mask << shift); + else + utemp |= (mask << shift); + + vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL); + spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags); + return 0; +} + +static int dm365_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + unsigned long flags; + u32 utemp, mask = 0x1, shift = 0, offset = DM365_ISP5_PCCR; + u32 (*read)(u32 offset) = isp5_read; + void(*write)(u32 val, u32 offset) = isp5_write; + + switch (clock_sel) { + case VPSS_BL_CLOCK: + break; + case VPSS_CCDC_CLOCK: + shift = 1; + break; + case VPSS_H3A_CLOCK: + shift = 2; + break; + case VPSS_RSZ_CLOCK: + shift = 3; + break; + case VPSS_IPIPE_CLOCK: + shift = 4; + break; + case VPSS_IPIPEIF_CLOCK: + shift = 5; + break; + case VPSS_PCLK_INTERNAL: + shift = 6; + break; + case VPSS_PSYNC_CLOCK_SEL: + shift = 7; + break; + case VPSS_VPBE_CLOCK: + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_VENC_CLOCK_SEL: + shift = 2; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_LDC_CLOCK: + shift = 3; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_FDIF_CLOCK: + shift = 4; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_OSD_CLOCK_SEL: + shift = 6; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + case VPSS_LDC_CLOCK_SEL: + shift = 7; + read = vpss_regr; + write = vpss_regw; + offset = DM365_VPBE_CLK_CTRL; + break; + default: + printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n", + clock_sel); + return -1; + } + + spin_lock_irqsave(&oper_cfg.vpss_lock, flags); + utemp = read(offset); + if (!en) { + mask = ~mask; + utemp &= (mask << shift); + } else + utemp |= (mask << shift); + + write(utemp, offset); + spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags); + + return 0; +} + +int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + if (!oper_cfg.hw_ops.enable_clock) + return -EINVAL; + + return oper_cfg.hw_ops.enable_clock(clock_sel, en); +} +EXPORT_SYMBOL(vpss_enable_clock); + +void dm365_vpss_set_sync_pol(struct vpss_sync_pol sync) +{ + int val = 0; + val = isp5_read(DM365_ISP5_CCDCMUX); + + val |= (sync.ccdpg_hdpol << DM365_CCDC_PG_HD_POL_SHIFT); + val |= (sync.ccdpg_vdpol << DM365_CCDC_PG_VD_POL_SHIFT); + + isp5_write(val, DM365_ISP5_CCDCMUX); +} +EXPORT_SYMBOL(dm365_vpss_set_sync_pol); + +void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size) +{ + int current_reg = ((frame_size.hlpfr >> 1) - 1) << 16; + + current_reg |= (frame_size.pplen - 1); + isp5_write(current_reg, DM365_ISP5_PG_FRAME_SIZE); +} +EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size); + +static int __devinit vpss_probe(struct platform_device *pdev) +{ + struct resource *r1, *r2; + char *platform_name; + int status; + + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENOENT; + } + + platform_name = pdev->dev.platform_data; + if (!strcmp(platform_name, "dm355_vpss")) + oper_cfg.platform = DM355; + else if (!strcmp(platform_name, "dm365_vpss")) + oper_cfg.platform = DM365; + else if (!strcmp(platform_name, "dm644x_vpss")) + oper_cfg.platform = DM644X; + else { + dev_err(&pdev->dev, "vpss driver not supported on" + " this platform\n"); + return -ENODEV; + } + + dev_info(&pdev->dev, "%s vpss probed\n", platform_name); + r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r1) + return -ENOENT; + + r1 = request_mem_region(r1->start, resource_size(r1), r1->name); + if (!r1) + return -EBUSY; + + oper_cfg.vpss_regs_base0 = ioremap(r1->start, resource_size(r1)); + if (!oper_cfg.vpss_regs_base0) { + status = -EBUSY; + goto fail1; + } + + if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) { + r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!r2) { + status = -ENOENT; + goto fail2; + } + r2 = request_mem_region(r2->start, resource_size(r2), r2->name); + if (!r2) { + status = -EBUSY; + goto fail2; + } + + oper_cfg.vpss_regs_base1 = ioremap(r2->start, + resource_size(r2)); + if (!oper_cfg.vpss_regs_base1) { + status = -EBUSY; + goto fail3; + } + } + + if (oper_cfg.platform == DM355) { + oper_cfg.hw_ops.enable_clock = dm355_enable_clock; + oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source; + /* Setup vpss interrupts */ + bl_regw(DM355_VPSSBL_INTSEL_DEFAULT, DM355_VPSSBL_INTSEL); + bl_regw(DM355_VPSSBL_EVTSEL_DEFAULT, DM355_VPSSBL_EVTSEL); + } else if (oper_cfg.platform == DM365) { + oper_cfg.hw_ops.enable_clock = dm365_enable_clock; + oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source; + /* Setup vpss interrupts */ + isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1); + isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2); + isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3); + } else + oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow; + + spin_lock_init(&oper_cfg.vpss_lock); + dev_info(&pdev->dev, "%s vpss probe success\n", platform_name); + return 0; + +fail3: + release_mem_region(r2->start, resource_size(r2)); +fail2: + iounmap(oper_cfg.vpss_regs_base0); +fail1: + release_mem_region(r1->start, resource_size(r1)); + return status; +} + +static int __devexit vpss_remove(struct platform_device *pdev) +{ + struct resource *res; + + iounmap(oper_cfg.vpss_regs_base0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) { + iounmap(oper_cfg.vpss_regs_base1); + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + release_mem_region(res->start, resource_size(res)); + } + return 0; +} + +static struct platform_driver vpss_driver = { + .driver = { + .name = "vpss", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(vpss_remove), + .probe = vpss_probe, +}; + +static void vpss_exit(void) +{ + platform_driver_unregister(&vpss_driver); +} + +static int __init vpss_init(void) +{ + return platform_driver_register(&vpss_driver); +} +subsys_initcall(vpss_init); +module_exit(vpss_exit); |